freebsd-dev/module/zfs/vdev_mirror.c
Matthew Ahrens 9e052db462 OpenZFS 9290 - device removal reduces redundancy of mirrors
Mirrors are supposed to provide redundancy in the face of whole-disk
failure and silent damage (e.g. some data on disk is not right, but ZFS
hasn't detected the whole device as being broken). However, the current
device removal implementation bypasses some of the mirror's redundancy.
Note that in no case is incorrect data returned, but we might get a
checksum error when we should have been able to find the right data.

There are two underlying problems:

1. When we remove a mirror device, we only read one side of the mirror.
Since we can't verify the checksum, this side may be silently bad, but
the good data is on the other side of the mirror (which we didn't read).
This can cause the removal to "bake in" the busted data – all copies of
the data in the new location are the same, busted version, while we left
the good version behind.

The fix for this is to read and copy both sides of the mirror. If the
old and new vdevs are mirrors, we will read both sides of the old
mirror, and write each copy to the corresponding side of the new mirror.
(If the old and new vdevs have a different number of children, we will
do this as best as possible.) Even though we aren't verifying checksums,
this ensures that as long as there's a good copy of the data, we'll have
a good copy after the removal, even if there's silent damage to one side
of the mirror. If we're removing a mirror that has some silent damage,
we'll have exactly the same damage in the new location (assuming that
the new location is also a mirror).

2. When we read from an indirect vdev that points to a mirror vdev, we
only consider one copy of the data. This can lead to reduced effective
redundancy, because we might read a bad copy of the data from one side
of the mirror, and not retry the other, good side of the mirror.

Note that the problem is not with the removal process, but rather after
the removal has completed (having copied correct data to both sides of
the mirror), if one side of the new mirror is silently damaged, we
encounter the problem when reading the relocated data via the indirect
vdev. Also note that the problem doesn't occur when ZFS knows that one
side of the mirror is bad, e.g. when a disk entirely fails or is
offlined.

The impact is that reads (from indirect vdevs that point to mirrors) may
return a checksum error even though the good data exists on one side of
the mirror, and scrub doesn't repair all data on the mirror (if some of
it is pointed to via an indirect vdev).

The fix for this is complicated by "split blocks" - one logical block
may be split into two (or more) pieces with each piece moved to a
different new location. In this case we need to read all versions of
each split (one from each side of the mirror), and figure out which
combination of versions results in the correct checksum, and then repair
the incorrect versions.

This ensures that we supply the same redundancy whether you use device
removal or not. For example, if a mirror has small silent errors on all
of its children, we can still reconstruct the correct data, as long as
those errors are at sufficiently-separated offsets (specifically,
separated by the largest block size - default of 128KB, but up to 16MB).

Porting notes:

* A new indirect vdev check was moved from dsl_scan_needs_resilver_cb()
  to dsl_scan_needs_resilver(), which was added to ZoL as part of the
  sequential scrub work.

* Passed NULL for zfs_ereport_post_checksum()'s zbookmark_phys_t
  parameter.  The extra parameter is unique to ZoL.

* When posting indirect checksum errors the ABD can be passed directly,
  zfs_ereport_post_checksum() is not yet ABD-aware in OpenZFS.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9290
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/591
Closes #6900
2018-04-14 12:21:39 -07:00

759 lines
20 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright 2010 Sun Microsystems, Inc. All rights reserved.
* Use is subject to license terms.
*/
/*
* Copyright (c) 2012, 2015 by Delphix. All rights reserved.
*/
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/vdev_impl.h>
#include <sys/zio.h>
#include <sys/abd.h>
#include <sys/fs/zfs.h>
/*
* Vdev mirror kstats
*/
static kstat_t *mirror_ksp = NULL;
typedef struct mirror_stats {
kstat_named_t vdev_mirror_stat_rotating_linear;
kstat_named_t vdev_mirror_stat_rotating_offset;
kstat_named_t vdev_mirror_stat_rotating_seek;
kstat_named_t vdev_mirror_stat_non_rotating_linear;
kstat_named_t vdev_mirror_stat_non_rotating_seek;
kstat_named_t vdev_mirror_stat_preferred_found;
kstat_named_t vdev_mirror_stat_preferred_not_found;
} mirror_stats_t;
static mirror_stats_t mirror_stats = {
/* New I/O follows directly the last I/O */
{ "rotating_linear", KSTAT_DATA_UINT64 },
/* New I/O is within zfs_vdev_mirror_rotating_seek_offset of the last */
{ "rotating_offset", KSTAT_DATA_UINT64 },
/* New I/O requires random seek */
{ "rotating_seek", KSTAT_DATA_UINT64 },
/* New I/O follows directly the last I/O (nonrot) */
{ "non_rotating_linear", KSTAT_DATA_UINT64 },
/* New I/O requires random seek (nonrot) */
{ "non_rotating_seek", KSTAT_DATA_UINT64 },
/* Preferred child vdev found */
{ "preferred_found", KSTAT_DATA_UINT64 },
/* Preferred child vdev not found or equal load */
{ "preferred_not_found", KSTAT_DATA_UINT64 },
};
#define MIRROR_STAT(stat) (mirror_stats.stat.value.ui64)
#define MIRROR_INCR(stat, val) atomic_add_64(&MIRROR_STAT(stat), val)
#define MIRROR_BUMP(stat) MIRROR_INCR(stat, 1)
void
vdev_mirror_stat_init(void)
{
mirror_ksp = kstat_create("zfs", 0, "vdev_mirror_stats",
"misc", KSTAT_TYPE_NAMED,
sizeof (mirror_stats) / sizeof (kstat_named_t), KSTAT_FLAG_VIRTUAL);
if (mirror_ksp != NULL) {
mirror_ksp->ks_data = &mirror_stats;
kstat_install(mirror_ksp);
}
}
void
vdev_mirror_stat_fini(void)
{
if (mirror_ksp != NULL) {
kstat_delete(mirror_ksp);
mirror_ksp = NULL;
}
}
/*
* Virtual device vector for mirroring.
*/
typedef struct mirror_child {
vdev_t *mc_vd;
uint64_t mc_offset;
int mc_error;
int mc_load;
uint8_t mc_tried;
uint8_t mc_skipped;
uint8_t mc_speculative;
} mirror_child_t;
typedef struct mirror_map {
int *mm_preferred;
int mm_preferred_cnt;
int mm_children;
boolean_t mm_replacing;
boolean_t mm_root;
mirror_child_t mm_child[];
} mirror_map_t;
static int vdev_mirror_shift = 21;
/*
* The load configuration settings below are tuned by default for
* the case where all devices are of the same rotational type.
*
* If there is a mixture of rotating and non-rotating media, setting
* zfs_vdev_mirror_non_rotating_seek_inc to 0 may well provide better results
* as it will direct more reads to the non-rotating vdevs which are more likely
* to have a higher performance.
*/
/* Rotating media load calculation configuration. */
static int zfs_vdev_mirror_rotating_inc = 0;
static int zfs_vdev_mirror_rotating_seek_inc = 5;
static int zfs_vdev_mirror_rotating_seek_offset = 1 * 1024 * 1024;
/* Non-rotating media load calculation configuration. */
static int zfs_vdev_mirror_non_rotating_inc = 0;
static int zfs_vdev_mirror_non_rotating_seek_inc = 1;
static inline size_t
vdev_mirror_map_size(int children)
{
return (offsetof(mirror_map_t, mm_child[children]) +
sizeof (int) * children);
}
static inline mirror_map_t *
vdev_mirror_map_alloc(int children, boolean_t replacing, boolean_t root)
{
mirror_map_t *mm;
mm = kmem_zalloc(vdev_mirror_map_size(children), KM_SLEEP);
mm->mm_children = children;
mm->mm_replacing = replacing;
mm->mm_root = root;
mm->mm_preferred = (int *)((uintptr_t)mm +
offsetof(mirror_map_t, mm_child[children]));
return (mm);
}
static void
vdev_mirror_map_free(zio_t *zio)
{
mirror_map_t *mm = zio->io_vsd;
kmem_free(mm, vdev_mirror_map_size(mm->mm_children));
}
static const zio_vsd_ops_t vdev_mirror_vsd_ops = {
.vsd_free = vdev_mirror_map_free,
.vsd_cksum_report = zio_vsd_default_cksum_report
};
static int
vdev_mirror_load(mirror_map_t *mm, vdev_t *vd, uint64_t zio_offset)
{
uint64_t last_offset;
int64_t offset_diff;
int load;
/* All DVAs have equal weight at the root. */
if (mm->mm_root)
return (INT_MAX);
/*
* We don't return INT_MAX if the device is resilvering i.e.
* vdev_resilver_txg != 0 as when tested performance was slightly
* worse overall when resilvering with compared to without.
*/
/* Fix zio_offset for leaf vdevs */
if (vd->vdev_ops->vdev_op_leaf)
zio_offset += VDEV_LABEL_START_SIZE;
/* Standard load based on pending queue length. */
load = vdev_queue_length(vd);
last_offset = vdev_queue_last_offset(vd);
if (vd->vdev_nonrot) {
/* Non-rotating media. */
if (last_offset == zio_offset) {
MIRROR_BUMP(vdev_mirror_stat_non_rotating_linear);
return (load + zfs_vdev_mirror_non_rotating_inc);
}
/*
* Apply a seek penalty even for non-rotating devices as
* sequential I/O's can be aggregated into fewer operations on
* the device, thus avoiding unnecessary per-command overhead
* and boosting performance.
*/
MIRROR_BUMP(vdev_mirror_stat_non_rotating_seek);
return (load + zfs_vdev_mirror_non_rotating_seek_inc);
}
/* Rotating media I/O's which directly follow the last I/O. */
if (last_offset == zio_offset) {
MIRROR_BUMP(vdev_mirror_stat_rotating_linear);
return (load + zfs_vdev_mirror_rotating_inc);
}
/*
* Apply half the seek increment to I/O's within seek offset
* of the last I/O issued to this vdev as they should incur less
* of a seek increment.
*/
offset_diff = (int64_t)(last_offset - zio_offset);
if (ABS(offset_diff) < zfs_vdev_mirror_rotating_seek_offset) {
MIRROR_BUMP(vdev_mirror_stat_rotating_offset);
return (load + (zfs_vdev_mirror_rotating_seek_inc / 2));
}
/* Apply the full seek increment to all other I/O's. */
MIRROR_BUMP(vdev_mirror_stat_rotating_seek);
return (load + zfs_vdev_mirror_rotating_seek_inc);
}
/*
* Avoid inlining the function to keep vdev_mirror_io_start(), which
* is this functions only caller, as small as possible on the stack.
*/
noinline static mirror_map_t *
vdev_mirror_map_init(zio_t *zio)
{
mirror_map_t *mm = NULL;
mirror_child_t *mc;
vdev_t *vd = zio->io_vd;
int c;
if (vd == NULL) {
dva_t *dva = zio->io_bp->blk_dva;
spa_t *spa = zio->io_spa;
mm = vdev_mirror_map_alloc(BP_GET_NDVAS(zio->io_bp), B_FALSE,
B_TRUE);
for (c = 0; c < mm->mm_children; c++) {
mc = &mm->mm_child[c];
mc->mc_vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[c]));
mc->mc_offset = DVA_GET_OFFSET(&dva[c]);
}
} else {
mm = vdev_mirror_map_alloc(vd->vdev_children,
(vd->vdev_ops == &vdev_replacing_ops ||
vd->vdev_ops == &vdev_spare_ops), B_FALSE);
for (c = 0; c < mm->mm_children; c++) {
mc = &mm->mm_child[c];
mc->mc_vd = vd->vdev_child[c];
mc->mc_offset = zio->io_offset;
}
}
zio->io_vsd = mm;
zio->io_vsd_ops = &vdev_mirror_vsd_ops;
return (mm);
}
static int
vdev_mirror_open(vdev_t *vd, uint64_t *asize, uint64_t *max_asize,
uint64_t *ashift)
{
int numerrors = 0;
int lasterror = 0;
if (vd->vdev_children == 0) {
vd->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
return (SET_ERROR(EINVAL));
}
vdev_open_children(vd);
for (int c = 0; c < vd->vdev_children; c++) {
vdev_t *cvd = vd->vdev_child[c];
if (cvd->vdev_open_error) {
lasterror = cvd->vdev_open_error;
numerrors++;
continue;
}
*asize = MIN(*asize - 1, cvd->vdev_asize - 1) + 1;
*max_asize = MIN(*max_asize - 1, cvd->vdev_max_asize - 1) + 1;
*ashift = MAX(*ashift, cvd->vdev_ashift);
}
if (numerrors == vd->vdev_children) {
vd->vdev_stat.vs_aux = VDEV_AUX_NO_REPLICAS;
return (lasterror);
}
return (0);
}
static void
vdev_mirror_close(vdev_t *vd)
{
for (int c = 0; c < vd->vdev_children; c++)
vdev_close(vd->vdev_child[c]);
}
static void
vdev_mirror_child_done(zio_t *zio)
{
mirror_child_t *mc = zio->io_private;
mc->mc_error = zio->io_error;
mc->mc_tried = 1;
mc->mc_skipped = 0;
}
static void
vdev_mirror_scrub_done(zio_t *zio)
{
mirror_child_t *mc = zio->io_private;
if (zio->io_error == 0) {
zio_t *pio;
zio_link_t *zl = NULL;
mutex_enter(&zio->io_lock);
while ((pio = zio_walk_parents(zio, &zl)) != NULL) {
mutex_enter(&pio->io_lock);
ASSERT3U(zio->io_size, >=, pio->io_size);
abd_copy(pio->io_abd, zio->io_abd, pio->io_size);
mutex_exit(&pio->io_lock);
}
mutex_exit(&zio->io_lock);
}
abd_free(zio->io_abd);
mc->mc_error = zio->io_error;
mc->mc_tried = 1;
mc->mc_skipped = 0;
}
/*
* Check the other, lower-index DVAs to see if they're on the same
* vdev as the child we picked. If they are, use them since they
* are likely to have been allocated from the primary metaslab in
* use at the time, and hence are more likely to have locality with
* single-copy data.
*/
static int
vdev_mirror_dva_select(zio_t *zio, int p)
{
dva_t *dva = zio->io_bp->blk_dva;
mirror_map_t *mm = zio->io_vsd;
int preferred;
int c;
preferred = mm->mm_preferred[p];
for (p--; p >= 0; p--) {
c = mm->mm_preferred[p];
if (DVA_GET_VDEV(&dva[c]) == DVA_GET_VDEV(&dva[preferred]))
preferred = c;
}
return (preferred);
}
static int
vdev_mirror_preferred_child_randomize(zio_t *zio)
{
mirror_map_t *mm = zio->io_vsd;
int p;
if (mm->mm_root) {
p = spa_get_random(mm->mm_preferred_cnt);
return (vdev_mirror_dva_select(zio, p));
}
/*
* To ensure we don't always favour the first matching vdev,
* which could lead to wear leveling issues on SSD's, we
* use the I/O offset as a pseudo random seed into the vdevs
* which have the lowest load.
*/
p = (zio->io_offset >> vdev_mirror_shift) % mm->mm_preferred_cnt;
return (mm->mm_preferred[p]);
}
/*
* Try to find a vdev whose DTL doesn't contain the block we want to read
* prefering vdevs based on determined load.
*
* Try to find a child whose DTL doesn't contain the block we want to read.
* If we can't, try the read on any vdev we haven't already tried.
*/
static int
vdev_mirror_child_select(zio_t *zio)
{
mirror_map_t *mm = zio->io_vsd;
uint64_t txg = zio->io_txg;
int c, lowest_load;
ASSERT(zio->io_bp == NULL || BP_PHYSICAL_BIRTH(zio->io_bp) == txg);
lowest_load = INT_MAX;
mm->mm_preferred_cnt = 0;
for (c = 0; c < mm->mm_children; c++) {
mirror_child_t *mc;
mc = &mm->mm_child[c];
if (mc->mc_tried || mc->mc_skipped)
continue;
if (mc->mc_vd == NULL || !vdev_readable(mc->mc_vd)) {
mc->mc_error = SET_ERROR(ENXIO);
mc->mc_tried = 1; /* don't even try */
mc->mc_skipped = 1;
continue;
}
if (vdev_dtl_contains(mc->mc_vd, DTL_MISSING, txg, 1)) {
mc->mc_error = SET_ERROR(ESTALE);
mc->mc_skipped = 1;
mc->mc_speculative = 1;
continue;
}
mc->mc_load = vdev_mirror_load(mm, mc->mc_vd, mc->mc_offset);
if (mc->mc_load > lowest_load)
continue;
if (mc->mc_load < lowest_load) {
lowest_load = mc->mc_load;
mm->mm_preferred_cnt = 0;
}
mm->mm_preferred[mm->mm_preferred_cnt] = c;
mm->mm_preferred_cnt++;
}
if (mm->mm_preferred_cnt == 1) {
MIRROR_BUMP(vdev_mirror_stat_preferred_found);
return (mm->mm_preferred[0]);
}
if (mm->mm_preferred_cnt > 1) {
MIRROR_BUMP(vdev_mirror_stat_preferred_not_found);
return (vdev_mirror_preferred_child_randomize(zio));
}
/*
* Every device is either missing or has this txg in its DTL.
* Look for any child we haven't already tried before giving up.
*/
for (c = 0; c < mm->mm_children; c++) {
if (!mm->mm_child[c].mc_tried)
return (c);
}
/*
* Every child failed. There's no place left to look.
*/
return (-1);
}
static void
vdev_mirror_io_start(zio_t *zio)
{
mirror_map_t *mm;
mirror_child_t *mc;
int c, children;
mm = vdev_mirror_map_init(zio);
if (zio->io_type == ZIO_TYPE_READ) {
if (zio->io_bp != NULL &&
(zio->io_flags & ZIO_FLAG_SCRUB) && !mm->mm_replacing) {
/*
* For scrubbing reads (if we can verify the
* checksum here, as indicated by io_bp being
* non-NULL) we need to allocate a read buffer for
* each child and issue reads to all children. If
* any child succeeds, it will copy its data into
* zio->io_data in vdev_mirror_scrub_done.
*/
for (c = 0; c < mm->mm_children; c++) {
mc = &mm->mm_child[c];
zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
mc->mc_vd, mc->mc_offset,
abd_alloc_sametype(zio->io_abd,
zio->io_size), zio->io_size,
zio->io_type, zio->io_priority, 0,
vdev_mirror_scrub_done, mc));
}
zio_execute(zio);
return;
}
/*
* For normal reads just pick one child.
*/
c = vdev_mirror_child_select(zio);
children = (c >= 0);
} else {
ASSERT(zio->io_type == ZIO_TYPE_WRITE);
/*
* Writes go to all children.
*/
c = 0;
children = mm->mm_children;
}
while (children--) {
mc = &mm->mm_child[c];
zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
mc->mc_vd, mc->mc_offset, zio->io_abd, zio->io_size,
zio->io_type, zio->io_priority, 0,
vdev_mirror_child_done, mc));
c++;
}
zio_execute(zio);
}
static int
vdev_mirror_worst_error(mirror_map_t *mm)
{
int error[2] = { 0, 0 };
for (int c = 0; c < mm->mm_children; c++) {
mirror_child_t *mc = &mm->mm_child[c];
int s = mc->mc_speculative;
error[s] = zio_worst_error(error[s], mc->mc_error);
}
return (error[0] ? error[0] : error[1]);
}
static void
vdev_mirror_io_done(zio_t *zio)
{
mirror_map_t *mm = zio->io_vsd;
mirror_child_t *mc;
int c;
int good_copies = 0;
int unexpected_errors = 0;
for (c = 0; c < mm->mm_children; c++) {
mc = &mm->mm_child[c];
if (mc->mc_error) {
if (!mc->mc_skipped)
unexpected_errors++;
} else if (mc->mc_tried) {
good_copies++;
}
}
if (zio->io_type == ZIO_TYPE_WRITE) {
/*
* XXX -- for now, treat partial writes as success.
*
* Now that we support write reallocation, it would be better
* to treat partial failure as real failure unless there are
* no non-degraded top-level vdevs left, and not update DTLs
* if we intend to reallocate.
*/
/* XXPOLICY */
if (good_copies != mm->mm_children) {
/*
* Always require at least one good copy.
*
* For ditto blocks (io_vd == NULL), require
* all copies to be good.
*
* XXX -- for replacing vdevs, there's no great answer.
* If the old device is really dead, we may not even
* be able to access it -- so we only want to
* require good writes to the new device. But if
* the new device turns out to be flaky, we want
* to be able to detach it -- which requires all
* writes to the old device to have succeeded.
*/
if (good_copies == 0 || zio->io_vd == NULL)
zio->io_error = vdev_mirror_worst_error(mm);
}
return;
}
ASSERT(zio->io_type == ZIO_TYPE_READ);
/*
* If we don't have a good copy yet, keep trying other children.
*/
/* XXPOLICY */
if (good_copies == 0 && (c = vdev_mirror_child_select(zio)) != -1) {
ASSERT(c >= 0 && c < mm->mm_children);
mc = &mm->mm_child[c];
zio_vdev_io_redone(zio);
zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
mc->mc_vd, mc->mc_offset, zio->io_abd, zio->io_size,
ZIO_TYPE_READ, zio->io_priority, 0,
vdev_mirror_child_done, mc));
return;
}
/* XXPOLICY */
if (good_copies == 0) {
zio->io_error = vdev_mirror_worst_error(mm);
ASSERT(zio->io_error != 0);
}
if (good_copies && spa_writeable(zio->io_spa) &&
(unexpected_errors ||
(zio->io_flags & ZIO_FLAG_RESILVER) ||
((zio->io_flags & ZIO_FLAG_SCRUB) && mm->mm_replacing))) {
/*
* Use the good data we have in hand to repair damaged children.
*/
for (c = 0; c < mm->mm_children; c++) {
/*
* Don't rewrite known good children.
* Not only is it unnecessary, it could
* actually be harmful: if the system lost
* power while rewriting the only good copy,
* there would be no good copies left!
*/
mc = &mm->mm_child[c];
if (mc->mc_error == 0) {
if (mc->mc_tried)
continue;
/*
* We didn't try this child. We need to
* repair it if:
* 1. it's a scrub (in which case we have
* tried everything that was healthy)
* - or -
* 2. it's an indirect vdev (in which case
* it could point to any other vdev, which
* might have a bad DTL)
* - or -
* 3. the DTL indicates that this data is
* missing from this vdev
*/
if (!(zio->io_flags & ZIO_FLAG_SCRUB) &&
mc->mc_vd->vdev_ops != &vdev_indirect_ops &&
!vdev_dtl_contains(mc->mc_vd, DTL_PARTIAL,
zio->io_txg, 1))
continue;
mc->mc_error = SET_ERROR(ESTALE);
}
zio_nowait(zio_vdev_child_io(zio, zio->io_bp,
mc->mc_vd, mc->mc_offset,
zio->io_abd, zio->io_size,
ZIO_TYPE_WRITE, ZIO_PRIORITY_ASYNC_WRITE,
ZIO_FLAG_IO_REPAIR | (unexpected_errors ?
ZIO_FLAG_SELF_HEAL : 0), NULL, NULL));
}
}
}
static void
vdev_mirror_state_change(vdev_t *vd, int faulted, int degraded)
{
if (faulted == vd->vdev_children)
vdev_set_state(vd, B_FALSE, VDEV_STATE_CANT_OPEN,
VDEV_AUX_NO_REPLICAS);
else if (degraded + faulted != 0)
vdev_set_state(vd, B_FALSE, VDEV_STATE_DEGRADED, VDEV_AUX_NONE);
else
vdev_set_state(vd, B_FALSE, VDEV_STATE_HEALTHY, VDEV_AUX_NONE);
}
vdev_ops_t vdev_mirror_ops = {
vdev_mirror_open,
vdev_mirror_close,
vdev_default_asize,
vdev_mirror_io_start,
vdev_mirror_io_done,
vdev_mirror_state_change,
NULL,
NULL,
NULL,
NULL,
VDEV_TYPE_MIRROR, /* name of this vdev type */
B_FALSE /* not a leaf vdev */
};
vdev_ops_t vdev_replacing_ops = {
vdev_mirror_open,
vdev_mirror_close,
vdev_default_asize,
vdev_mirror_io_start,
vdev_mirror_io_done,
vdev_mirror_state_change,
NULL,
NULL,
NULL,
NULL,
VDEV_TYPE_REPLACING, /* name of this vdev type */
B_FALSE /* not a leaf vdev */
};
vdev_ops_t vdev_spare_ops = {
vdev_mirror_open,
vdev_mirror_close,
vdev_default_asize,
vdev_mirror_io_start,
vdev_mirror_io_done,
vdev_mirror_state_change,
NULL,
NULL,
NULL,
NULL,
VDEV_TYPE_SPARE, /* name of this vdev type */
B_FALSE /* not a leaf vdev */
};
#if defined(_KERNEL) && defined(HAVE_SPL)
/* BEGIN CSTYLED */
module_param(zfs_vdev_mirror_rotating_inc, int, 0644);
MODULE_PARM_DESC(zfs_vdev_mirror_rotating_inc,
"Rotating media load increment for non-seeking I/O's");
module_param(zfs_vdev_mirror_rotating_seek_inc, int, 0644);
MODULE_PARM_DESC(zfs_vdev_mirror_rotating_seek_inc,
"Rotating media load increment for seeking I/O's");
module_param(zfs_vdev_mirror_rotating_seek_offset, int, 0644);
MODULE_PARM_DESC(zfs_vdev_mirror_rotating_seek_offset,
"Offset in bytes from the last I/O which "
"triggers a reduced rotating media seek increment");
module_param(zfs_vdev_mirror_non_rotating_inc, int, 0644);
MODULE_PARM_DESC(zfs_vdev_mirror_non_rotating_inc,
"Non-rotating media load increment for non-seeking I/O's");
module_param(zfs_vdev_mirror_non_rotating_seek_inc, int, 0644);
MODULE_PARM_DESC(zfs_vdev_mirror_non_rotating_seek_inc,
"Non-rotating media load increment for seeking I/O's");
/* END CSTYLED */
#endif