freebsd-dev/sys/dev/intel/pchtherm.c
Warner Losh 685dc743dc sys: Remove $FreeBSD$: one-line .c pattern
Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/
2023-08-16 11:54:36 -06:00

326 lines
9.7 KiB
C

/*
* Copyright (c) 2020 Takanori Watanabe
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/errno.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#define PCHTHERM_REG_TEMP 0
#define PCHTHERM_REG_TSC 4
#define PCHTHERM_REG_TSS 6
#define PCHTHERM_REG_TSEL 8
#define PCHTHERM_REG_TSREL 0xa
#define PCHTHERM_REG_TSMIC 0xc
#define PCHTHERM_REG_CTT 0x10
#define PCHTHERM_REG_TAHV 0x14
#define PCHTHERM_REG_TALV 0x18
#define PCHTHERM_REG_TSPM 0x1c
#define PCHTHERM_REG_TL 0x40
#define PCHTHERM_REG_TL2 0x50
#define PCHTHERM_REG_PHL 0x60
#define PCHTHERM_REG_PHLC 0x62
#define PCHTHERM_REG_TAS 0x80
#define PCHTHERM_REG_TSPIEN 0x82
#define PCHTHERM_REG_TSGPEN 0x84
#define PCHTHERM_REG_TCFD 0xf0
#define PCHTHERM_GEN_LOCKDOWN 0x80
#define PCHTHERM_GEN_ENABLE 1
#define PCHTHERM_TEMP_FACTOR 5
#define PCHTHERM_TEMP_ZERO 2231
#define PCHTHERM_TEMP_MASK 0x1ff
#define PCHTHERM_TL_T0 0
#define PCHTHERM_TL_T1 10
#define PCHTHERM_TL_T2 20
#define PCHTHERM_TEMP_TO_IK(val) (((val) & PCHTHERM_TEMP_MASK) * \
PCHTHERM_TEMP_FACTOR + \
PCHTHERM_TEMP_ZERO)
struct pchtherm_softc
{
int tbarrid;
struct resource *tbar;
int enable;
int ctten;
int pmtemp;
unsigned int pmtime;
};
static const struct pci_device_table pchtherm_devices[] =
{
{ PCI_DEV(0x8086, 0x9c24),
PCI_DESCR("Haswell Thermal Subsystem")},
{ PCI_DEV(0x8086, 0x8c24),
PCI_DESCR("Haswell Thermal Subsystem")},
{ PCI_DEV(0x8086, 0x9ca4),
PCI_DESCR("Wildcat Point Thermal Subsystem")},
{ PCI_DEV(0x8086, 0x9d31),
PCI_DESCR("Skylake PCH Thermal Subsystem")},
{ PCI_DEV(0x8086, 0xa131),
PCI_DESCR("Skylake PCH 100 Thermal Subsystem")},
{ PCI_DEV(0x8086, 0x9df9),
PCI_DESCR("CannonLake-LP Thermal Subsystem")},
{ PCI_DEV(0x8086, 0xa379),
PCI_DESCR("CannonLake-H Thermal Subsystem")},
{ PCI_DEV(0x8086, 0x02f9),
PCI_DESCR("CometLake-LP Thermal Subsystem")},
{ PCI_DEV(0x8086, 0x06f9),
PCI_DESCR("CometLake-H Thermal Subsystem")},
{ PCI_DEV(0x8086, 0xa1b1),
PCI_DESCR("Lewisburg Thermal Subsystem")},
};
static int pchtherm_probe(device_t dev)
{
const struct pci_device_table *tbl;
tbl = PCI_MATCH(dev, pchtherm_devices);
if (tbl == NULL)
return (ENXIO);
device_set_desc(dev, tbl->descr);
return (BUS_PROBE_DEFAULT);
}
static int pchtherm_tltemp_sysctl(SYSCTL_HANDLER_ARGS)
{
struct pchtherm_softc *sc = oidp->oid_arg1;
int regshift = oidp->oid_arg2;
int temp;
temp = bus_read_4(sc->tbar, PCHTHERM_REG_TL);
temp >>= regshift;
temp = PCHTHERM_TEMP_TO_IK(temp);
return sysctl_handle_int(oidp, &temp, 0, req);
}
static int pchtherm_temp_sysctl(SYSCTL_HANDLER_ARGS)
{
struct pchtherm_softc *sc = oidp->oid_arg1;
int regoff = oidp->oid_arg2;
int temp;
temp = bus_read_2(sc->tbar, regoff);
temp = PCHTHERM_TEMP_TO_IK(temp);
return sysctl_handle_int(oidp, &temp, 0, req);
}
#define FLAG_PRINT(dev, str, val) device_printf \
(dev, str " %s %sable\n", \
((val) & 0x80)? "Locked" : "", \
((val) & 0x1)? "En" : "Dis")
static int pchtherm_attach(device_t dev)
{
struct pchtherm_softc *sc = device_get_softc(dev);
unsigned int val;
int flag;
int temp;
sc->tbarrid = PCIR_BAR(0);
sc->tbar = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&sc->tbarrid, RF_ACTIVE|RF_SHAREABLE);
if (sc->tbar == NULL) {
return (ENOMEM);
}
sc->enable = bus_read_1(sc->tbar, PCHTHERM_REG_TSEL);
if (!(sc->enable & PCHTHERM_GEN_ENABLE )) {
if (sc->enable & PCHTHERM_GEN_LOCKDOWN) {
device_printf(dev, "Sensor not available\n");
return 0;
} else {
device_printf(dev, "Enabling Sensor\n");
bus_write_1(sc->tbar, PCHTHERM_REG_TSEL,
PCHTHERM_GEN_ENABLE);
sc->enable = bus_read_1(sc->tbar, PCHTHERM_REG_TSEL);
if (!(sc->enable & PCHTHERM_GEN_ENABLE)) {
device_printf(dev, "Sensor enable failed\n");
return 0;
}
}
}
sc->ctten = bus_read_1(sc->tbar, PCHTHERM_REG_TSC);
if (bootverbose) {
FLAG_PRINT(dev, "Catastrophic Power Down", sc->ctten);
}
val = bus_read_1(sc->tbar, PCHTHERM_REG_TSREL);
if (bootverbose) {
FLAG_PRINT(dev, "SMBus report", val);
}
val = bus_read_1(sc->tbar, PCHTHERM_REG_TSMIC);
if (bootverbose) {
FLAG_PRINT(dev, "SMI on alert", val);
}
val = bus_read_2(sc->tbar, PCHTHERM_REG_TSPM);
flag = val >> 13;
if (bootverbose) {
device_printf(dev, "TSPM: %b\n",
flag, "\20\3Lock\2DTSS0EN\1DSSOC0");
device_printf(dev, "MAX Thermal Sensor Shutdown Time %ds\n",
1<<((val>>9)&7));
}
temp = val & PCHTHERM_TEMP_MASK;
sc->pmtemp = PCHTHERM_TEMP_TO_IK(temp);
sc->pmtime = 1<<((val>>9)&7);
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "pmtemp", CTLTYPE_INT|CTLFLAG_RD,
sc, PCHTHERM_REG_TSPM, pchtherm_temp_sysctl,
"IK", "Thermal sensor idle temperature");
SYSCTL_ADD_U32(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "pmtime", CTLFLAG_RD,
&sc->pmtime, 0,"Thermal sensor idle duration");
val = bus_read_4(sc->tbar, PCHTHERM_REG_TL);
flag = val>>29;
if (bootverbose) {
device_printf(dev, "Throttling %b\n",
flag, "\20\3Lock\2TT13EN\1TTEN");
}
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "t0temp", CTLTYPE_INT |CTLFLAG_RD,
sc, PCHTHERM_TL_T0, pchtherm_tltemp_sysctl,
"IK", "T0 temperature");
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "t1temp", CTLTYPE_INT |CTLFLAG_RD,
sc, PCHTHERM_TL_T1, pchtherm_tltemp_sysctl,
"IK", "T1 temperature");
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "t2temp", CTLTYPE_INT |CTLFLAG_RD,
sc, PCHTHERM_TL_T2, pchtherm_tltemp_sysctl,
"IK", "T2 temperature");
val = bus_read_2(sc->tbar, PCHTHERM_REG_TL2);
if (bootverbose) {
flag = val >>14;
device_printf(dev, "TL2 flag %b\n",
flag, "\20\1PMCTEN\2Lock");
}
/* If PHL is disable and lockdown, don't export it.*/
val = bus_read_2(sc->tbar, PCHTHERM_REG_PHLC);
val <<= 16;
val |= bus_read_2(sc->tbar, PCHTHERM_REG_PHL);
if ((val & 0x10000) != 0x10000) {
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "pch_hot_level",
CTLTYPE_INT |CTLFLAG_RD,
sc, PCHTHERM_REG_PHL,
pchtherm_temp_sysctl, "IK",
"PCH Hot level Temperature");
}
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "temperature", CTLTYPE_INT |CTLFLAG_RD,
sc, PCHTHERM_REG_TEMP,
pchtherm_temp_sysctl, "IK", "Current temperature");
/*
* If sensor enable bit is locked down, there is no way to change
* alart values effectively.
*/
if (!(sc->enable & PCHTHERM_GEN_LOCKDOWN) ||
bus_read_2(sc->tbar, PCHTHERM_REG_TAHV) != 0) {
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "tahv", CTLTYPE_INT |CTLFLAG_RD,
sc, PCHTHERM_REG_TAHV,
pchtherm_temp_sysctl, "IK",
"Alart High temperature");
}
if (!(sc->enable & PCHTHERM_GEN_LOCKDOWN) ||
bus_read_2(sc->tbar, PCHTHERM_REG_TALV) != 0) {
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "talv", CTLTYPE_INT |CTLFLAG_RD,
sc, PCHTHERM_REG_TALV,
pchtherm_temp_sysctl, "IK",
"Alart Low temperature");
}
if (!(sc->ctten& PCHTHERM_GEN_LOCKDOWN) ||
sc->ctten& PCHTHERM_GEN_ENABLE) {
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "ctt",
CTLTYPE_INT |CTLFLAG_RD,
sc, PCHTHERM_REG_CTT,
pchtherm_temp_sysctl, "IK",
"Catastrophic Trip Point");
}
return 0;
}
static int pchtherm_detach(device_t dev)
{
struct pchtherm_softc *sc = device_get_softc(dev);
bus_release_resource(dev, SYS_RES_MEMORY, sc->tbarrid, sc->tbar);
return 0;
}
static device_method_t pchtherm_methods[] =
{
DEVMETHOD(device_probe, pchtherm_probe),
DEVMETHOD(device_attach, pchtherm_attach),
DEVMETHOD(device_detach, pchtherm_detach),
DEVMETHOD_END
};
static driver_t pchtherm_driver = {
"pchtherm",
pchtherm_methods,
sizeof(struct pchtherm_softc)
};
DRIVER_MODULE(pchtherm, pci, pchtherm_driver, 0, 0);
PCI_PNP_INFO(pchtherm_devices);