2777 lines
70 KiB
C
2777 lines
70 KiB
C
|
|
/*-
|
|
* Copyright (c) 2006
|
|
* Damien Bergamini <damien.bergamini@free.fr>
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
/*-
|
|
* Ralink Technology RT2561, RT2561S and RT2661 chipset driver
|
|
* http://www.ralinktech.com/
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/firmware.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
#include <net80211/ieee80211_radiotap.h>
|
|
#include <net80211/ieee80211_regdomain.h>
|
|
#include <net80211/ieee80211_ratectl.h>
|
|
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/if_ether.h>
|
|
|
|
#include <dev/ral/rt2661reg.h>
|
|
#include <dev/ral/rt2661var.h>
|
|
|
|
#define RAL_DEBUG
|
|
#ifdef RAL_DEBUG
|
|
#define DPRINTF(sc, fmt, ...) do { \
|
|
if (sc->sc_debug > 0) \
|
|
printf(fmt, __VA_ARGS__); \
|
|
} while (0)
|
|
#define DPRINTFN(sc, n, fmt, ...) do { \
|
|
if (sc->sc_debug >= (n)) \
|
|
printf(fmt, __VA_ARGS__); \
|
|
} while (0)
|
|
#else
|
|
#define DPRINTF(sc, fmt, ...)
|
|
#define DPRINTFN(sc, n, fmt, ...)
|
|
#endif
|
|
|
|
static struct ieee80211vap *rt2661_vap_create(struct ieee80211com *,
|
|
const char [IFNAMSIZ], int, enum ieee80211_opmode,
|
|
int, const uint8_t [IEEE80211_ADDR_LEN],
|
|
const uint8_t [IEEE80211_ADDR_LEN]);
|
|
static void rt2661_vap_delete(struct ieee80211vap *);
|
|
static void rt2661_dma_map_addr(void *, bus_dma_segment_t *, int,
|
|
int);
|
|
static int rt2661_alloc_tx_ring(struct rt2661_softc *,
|
|
struct rt2661_tx_ring *, int);
|
|
static void rt2661_reset_tx_ring(struct rt2661_softc *,
|
|
struct rt2661_tx_ring *);
|
|
static void rt2661_free_tx_ring(struct rt2661_softc *,
|
|
struct rt2661_tx_ring *);
|
|
static int rt2661_alloc_rx_ring(struct rt2661_softc *,
|
|
struct rt2661_rx_ring *, int);
|
|
static void rt2661_reset_rx_ring(struct rt2661_softc *,
|
|
struct rt2661_rx_ring *);
|
|
static void rt2661_free_rx_ring(struct rt2661_softc *,
|
|
struct rt2661_rx_ring *);
|
|
static int rt2661_newstate(struct ieee80211vap *,
|
|
enum ieee80211_state, int);
|
|
static uint16_t rt2661_eeprom_read(struct rt2661_softc *, uint8_t);
|
|
static void rt2661_rx_intr(struct rt2661_softc *);
|
|
static void rt2661_tx_intr(struct rt2661_softc *);
|
|
static void rt2661_tx_dma_intr(struct rt2661_softc *,
|
|
struct rt2661_tx_ring *);
|
|
static void rt2661_mcu_beacon_expire(struct rt2661_softc *);
|
|
static void rt2661_mcu_wakeup(struct rt2661_softc *);
|
|
static void rt2661_mcu_cmd_intr(struct rt2661_softc *);
|
|
static void rt2661_scan_start(struct ieee80211com *);
|
|
static void rt2661_scan_end(struct ieee80211com *);
|
|
static void rt2661_getradiocaps(struct ieee80211com *, int, int *,
|
|
struct ieee80211_channel[]);
|
|
static void rt2661_set_channel(struct ieee80211com *);
|
|
static void rt2661_setup_tx_desc(struct rt2661_softc *,
|
|
struct rt2661_tx_desc *, uint32_t, uint16_t, int,
|
|
int, const bus_dma_segment_t *, int, int);
|
|
static int rt2661_tx_data(struct rt2661_softc *, struct mbuf *,
|
|
struct ieee80211_node *, int);
|
|
static int rt2661_tx_mgt(struct rt2661_softc *, struct mbuf *,
|
|
struct ieee80211_node *);
|
|
static int rt2661_transmit(struct ieee80211com *, struct mbuf *);
|
|
static void rt2661_start(struct rt2661_softc *);
|
|
static int rt2661_raw_xmit(struct ieee80211_node *, struct mbuf *,
|
|
const struct ieee80211_bpf_params *);
|
|
static void rt2661_watchdog(void *);
|
|
static void rt2661_parent(struct ieee80211com *);
|
|
static void rt2661_bbp_write(struct rt2661_softc *, uint8_t,
|
|
uint8_t);
|
|
static uint8_t rt2661_bbp_read(struct rt2661_softc *, uint8_t);
|
|
static void rt2661_rf_write(struct rt2661_softc *, uint8_t,
|
|
uint32_t);
|
|
static int rt2661_tx_cmd(struct rt2661_softc *, uint8_t,
|
|
uint16_t);
|
|
static void rt2661_select_antenna(struct rt2661_softc *);
|
|
static void rt2661_enable_mrr(struct rt2661_softc *);
|
|
static void rt2661_set_txpreamble(struct rt2661_softc *);
|
|
static void rt2661_set_basicrates(struct rt2661_softc *,
|
|
const struct ieee80211_rateset *);
|
|
static void rt2661_select_band(struct rt2661_softc *,
|
|
struct ieee80211_channel *);
|
|
static void rt2661_set_chan(struct rt2661_softc *,
|
|
struct ieee80211_channel *);
|
|
static void rt2661_set_bssid(struct rt2661_softc *,
|
|
const uint8_t *);
|
|
static void rt2661_set_macaddr(struct rt2661_softc *,
|
|
const uint8_t *);
|
|
static void rt2661_update_promisc(struct ieee80211com *);
|
|
static int rt2661_wme_update(struct ieee80211com *) __unused;
|
|
static void rt2661_update_slot(struct ieee80211com *);
|
|
static const char *rt2661_get_rf(int);
|
|
static void rt2661_read_eeprom(struct rt2661_softc *,
|
|
uint8_t macaddr[IEEE80211_ADDR_LEN]);
|
|
static int rt2661_bbp_init(struct rt2661_softc *);
|
|
static void rt2661_init_locked(struct rt2661_softc *);
|
|
static void rt2661_init(void *);
|
|
static void rt2661_stop_locked(struct rt2661_softc *);
|
|
static void rt2661_stop(void *);
|
|
static int rt2661_load_microcode(struct rt2661_softc *);
|
|
#ifdef notyet
|
|
static void rt2661_rx_tune(struct rt2661_softc *);
|
|
static void rt2661_radar_start(struct rt2661_softc *);
|
|
static int rt2661_radar_stop(struct rt2661_softc *);
|
|
#endif
|
|
static int rt2661_prepare_beacon(struct rt2661_softc *,
|
|
struct ieee80211vap *);
|
|
static void rt2661_enable_tsf_sync(struct rt2661_softc *);
|
|
static void rt2661_enable_tsf(struct rt2661_softc *);
|
|
static int rt2661_get_rssi(struct rt2661_softc *, uint8_t);
|
|
|
|
static const struct {
|
|
uint32_t reg;
|
|
uint32_t val;
|
|
} rt2661_def_mac[] = {
|
|
RT2661_DEF_MAC
|
|
};
|
|
|
|
static const struct {
|
|
uint8_t reg;
|
|
uint8_t val;
|
|
} rt2661_def_bbp[] = {
|
|
RT2661_DEF_BBP
|
|
};
|
|
|
|
static const struct rfprog {
|
|
uint8_t chan;
|
|
uint32_t r1, r2, r3, r4;
|
|
} rt2661_rf5225_1[] = {
|
|
RT2661_RF5225_1
|
|
}, rt2661_rf5225_2[] = {
|
|
RT2661_RF5225_2
|
|
};
|
|
|
|
static const uint8_t rt2661_chan_5ghz[] =
|
|
{ 36, 40, 44, 48, 52, 56, 60, 64,
|
|
100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140,
|
|
149, 153, 157, 161, 165 };
|
|
|
|
int
|
|
rt2661_attach(device_t dev, int id)
|
|
{
|
|
struct rt2661_softc *sc = device_get_softc(dev);
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint32_t val;
|
|
int error, ac, ntries;
|
|
|
|
sc->sc_id = id;
|
|
sc->sc_dev = dev;
|
|
|
|
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF | MTX_RECURSE);
|
|
|
|
callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0);
|
|
mbufq_init(&sc->sc_snd, ifqmaxlen);
|
|
|
|
/* wait for NIC to initialize */
|
|
for (ntries = 0; ntries < 1000; ntries++) {
|
|
if ((val = RAL_READ(sc, RT2661_MAC_CSR0)) != 0)
|
|
break;
|
|
DELAY(1000);
|
|
}
|
|
if (ntries == 1000) {
|
|
device_printf(sc->sc_dev,
|
|
"timeout waiting for NIC to initialize\n");
|
|
error = EIO;
|
|
goto fail1;
|
|
}
|
|
|
|
/* retrieve RF rev. no and various other things from EEPROM */
|
|
rt2661_read_eeprom(sc, ic->ic_macaddr);
|
|
|
|
device_printf(dev, "MAC/BBP RT%X, RF %s\n", val,
|
|
rt2661_get_rf(sc->rf_rev));
|
|
|
|
/*
|
|
* Allocate Tx and Rx rings.
|
|
*/
|
|
for (ac = 0; ac < 4; ac++) {
|
|
error = rt2661_alloc_tx_ring(sc, &sc->txq[ac],
|
|
RT2661_TX_RING_COUNT);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not allocate Tx ring %d\n", ac);
|
|
goto fail2;
|
|
}
|
|
}
|
|
|
|
error = rt2661_alloc_tx_ring(sc, &sc->mgtq, RT2661_MGT_RING_COUNT);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not allocate Mgt ring\n");
|
|
goto fail2;
|
|
}
|
|
|
|
error = rt2661_alloc_rx_ring(sc, &sc->rxq, RT2661_RX_RING_COUNT);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not allocate Rx ring\n");
|
|
goto fail3;
|
|
}
|
|
|
|
ic->ic_softc = sc;
|
|
ic->ic_name = device_get_nameunit(dev);
|
|
ic->ic_opmode = IEEE80211_M_STA;
|
|
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
|
|
|
|
/* set device capabilities */
|
|
ic->ic_caps =
|
|
IEEE80211_C_STA /* station mode */
|
|
| IEEE80211_C_IBSS /* ibss, nee adhoc, mode */
|
|
| IEEE80211_C_HOSTAP /* hostap mode */
|
|
| IEEE80211_C_MONITOR /* monitor mode */
|
|
| IEEE80211_C_AHDEMO /* adhoc demo mode */
|
|
| IEEE80211_C_WDS /* 4-address traffic works */
|
|
| IEEE80211_C_MBSS /* mesh point link mode */
|
|
| IEEE80211_C_SHPREAMBLE /* short preamble supported */
|
|
| IEEE80211_C_SHSLOT /* short slot time supported */
|
|
| IEEE80211_C_WPA /* capable of WPA1+WPA2 */
|
|
| IEEE80211_C_BGSCAN /* capable of bg scanning */
|
|
#ifdef notyet
|
|
| IEEE80211_C_TXFRAG /* handle tx frags */
|
|
| IEEE80211_C_WME /* 802.11e */
|
|
#endif
|
|
;
|
|
|
|
rt2661_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans,
|
|
ic->ic_channels);
|
|
|
|
ieee80211_ifattach(ic);
|
|
#if 0
|
|
ic->ic_wme.wme_update = rt2661_wme_update;
|
|
#endif
|
|
ic->ic_scan_start = rt2661_scan_start;
|
|
ic->ic_scan_end = rt2661_scan_end;
|
|
ic->ic_getradiocaps = rt2661_getradiocaps;
|
|
ic->ic_set_channel = rt2661_set_channel;
|
|
ic->ic_updateslot = rt2661_update_slot;
|
|
ic->ic_update_promisc = rt2661_update_promisc;
|
|
ic->ic_raw_xmit = rt2661_raw_xmit;
|
|
ic->ic_transmit = rt2661_transmit;
|
|
ic->ic_parent = rt2661_parent;
|
|
ic->ic_vap_create = rt2661_vap_create;
|
|
ic->ic_vap_delete = rt2661_vap_delete;
|
|
|
|
ieee80211_radiotap_attach(ic,
|
|
&sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap),
|
|
RT2661_TX_RADIOTAP_PRESENT,
|
|
&sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap),
|
|
RT2661_RX_RADIOTAP_PRESENT);
|
|
|
|
#ifdef RAL_DEBUG
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
|
|
"debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs");
|
|
#endif
|
|
if (bootverbose)
|
|
ieee80211_announce(ic);
|
|
|
|
return 0;
|
|
|
|
fail3: rt2661_free_tx_ring(sc, &sc->mgtq);
|
|
fail2: while (--ac >= 0)
|
|
rt2661_free_tx_ring(sc, &sc->txq[ac]);
|
|
fail1: mtx_destroy(&sc->sc_mtx);
|
|
return error;
|
|
}
|
|
|
|
int
|
|
rt2661_detach(void *xsc)
|
|
{
|
|
struct rt2661_softc *sc = xsc;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
RAL_LOCK(sc);
|
|
rt2661_stop_locked(sc);
|
|
RAL_UNLOCK(sc);
|
|
|
|
ieee80211_ifdetach(ic);
|
|
mbufq_drain(&sc->sc_snd);
|
|
|
|
rt2661_free_tx_ring(sc, &sc->txq[0]);
|
|
rt2661_free_tx_ring(sc, &sc->txq[1]);
|
|
rt2661_free_tx_ring(sc, &sc->txq[2]);
|
|
rt2661_free_tx_ring(sc, &sc->txq[3]);
|
|
rt2661_free_tx_ring(sc, &sc->mgtq);
|
|
rt2661_free_rx_ring(sc, &sc->rxq);
|
|
|
|
mtx_destroy(&sc->sc_mtx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ieee80211vap *
|
|
rt2661_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
|
|
enum ieee80211_opmode opmode, int flags,
|
|
const uint8_t bssid[IEEE80211_ADDR_LEN],
|
|
const uint8_t mac[IEEE80211_ADDR_LEN])
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
struct rt2661_vap *rvp;
|
|
struct ieee80211vap *vap;
|
|
|
|
switch (opmode) {
|
|
case IEEE80211_M_STA:
|
|
case IEEE80211_M_IBSS:
|
|
case IEEE80211_M_AHDEMO:
|
|
case IEEE80211_M_MONITOR:
|
|
case IEEE80211_M_HOSTAP:
|
|
case IEEE80211_M_MBSS:
|
|
/* XXXRP: TBD */
|
|
if (!TAILQ_EMPTY(&ic->ic_vaps)) {
|
|
device_printf(sc->sc_dev, "only 1 vap supported\n");
|
|
return NULL;
|
|
}
|
|
if (opmode == IEEE80211_M_STA)
|
|
flags |= IEEE80211_CLONE_NOBEACONS;
|
|
break;
|
|
case IEEE80211_M_WDS:
|
|
if (TAILQ_EMPTY(&ic->ic_vaps) ||
|
|
ic->ic_opmode != IEEE80211_M_HOSTAP) {
|
|
device_printf(sc->sc_dev,
|
|
"wds only supported in ap mode\n");
|
|
return NULL;
|
|
}
|
|
/*
|
|
* Silently remove any request for a unique
|
|
* bssid; WDS vap's always share the local
|
|
* mac address.
|
|
*/
|
|
flags &= ~IEEE80211_CLONE_BSSID;
|
|
break;
|
|
default:
|
|
device_printf(sc->sc_dev, "unknown opmode %d\n", opmode);
|
|
return NULL;
|
|
}
|
|
rvp = malloc(sizeof(struct rt2661_vap), M_80211_VAP, M_WAITOK | M_ZERO);
|
|
vap = &rvp->ral_vap;
|
|
ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid);
|
|
|
|
/* override state transition machine */
|
|
rvp->ral_newstate = vap->iv_newstate;
|
|
vap->iv_newstate = rt2661_newstate;
|
|
#if 0
|
|
vap->iv_update_beacon = rt2661_beacon_update;
|
|
#endif
|
|
|
|
ieee80211_ratectl_init(vap);
|
|
/* complete setup */
|
|
ieee80211_vap_attach(vap, ieee80211_media_change,
|
|
ieee80211_media_status, mac);
|
|
if (TAILQ_FIRST(&ic->ic_vaps) == vap)
|
|
ic->ic_opmode = opmode;
|
|
return vap;
|
|
}
|
|
|
|
static void
|
|
rt2661_vap_delete(struct ieee80211vap *vap)
|
|
{
|
|
struct rt2661_vap *rvp = RT2661_VAP(vap);
|
|
|
|
ieee80211_ratectl_deinit(vap);
|
|
ieee80211_vap_detach(vap);
|
|
free(rvp, M_80211_VAP);
|
|
}
|
|
|
|
void
|
|
rt2661_shutdown(void *xsc)
|
|
{
|
|
struct rt2661_softc *sc = xsc;
|
|
|
|
rt2661_stop(sc);
|
|
}
|
|
|
|
void
|
|
rt2661_suspend(void *xsc)
|
|
{
|
|
struct rt2661_softc *sc = xsc;
|
|
|
|
rt2661_stop(sc);
|
|
}
|
|
|
|
void
|
|
rt2661_resume(void *xsc)
|
|
{
|
|
struct rt2661_softc *sc = xsc;
|
|
|
|
if (sc->sc_ic.ic_nrunning > 0)
|
|
rt2661_init(sc);
|
|
}
|
|
|
|
static void
|
|
rt2661_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
if (error != 0)
|
|
return;
|
|
|
|
KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
|
|
|
|
*(bus_addr_t *)arg = segs[0].ds_addr;
|
|
}
|
|
|
|
static int
|
|
rt2661_alloc_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring,
|
|
int count)
|
|
{
|
|
int i, error;
|
|
|
|
ring->count = count;
|
|
ring->queued = 0;
|
|
ring->cur = ring->next = ring->stat = 0;
|
|
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
count * RT2661_TX_DESC_SIZE, 1, count * RT2661_TX_DESC_SIZE,
|
|
0, NULL, NULL, &ring->desc_dmat);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create desc DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not allocate DMA memory\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
|
|
count * RT2661_TX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr,
|
|
0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not load desc DMA map\n");
|
|
goto fail;
|
|
}
|
|
|
|
ring->data = malloc(count * sizeof (struct rt2661_tx_data), M_DEVBUF,
|
|
M_NOWAIT | M_ZERO);
|
|
if (ring->data == NULL) {
|
|
device_printf(sc->sc_dev, "could not allocate soft data\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES,
|
|
RT2661_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create data DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < count; i++) {
|
|
error = bus_dmamap_create(ring->data_dmat, 0,
|
|
&ring->data[i].map);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create DMA map\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail: rt2661_free_tx_ring(sc, ring);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
rt2661_reset_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring)
|
|
{
|
|
struct rt2661_tx_desc *desc;
|
|
struct rt2661_tx_data *data;
|
|
int i;
|
|
|
|
for (i = 0; i < ring->count; i++) {
|
|
desc = &ring->desc[i];
|
|
data = &ring->data[i];
|
|
|
|
if (data->m != NULL) {
|
|
bus_dmamap_sync(ring->data_dmat, data->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(ring->data_dmat, data->map);
|
|
m_freem(data->m);
|
|
data->m = NULL;
|
|
}
|
|
|
|
if (data->ni != NULL) {
|
|
ieee80211_free_node(data->ni);
|
|
data->ni = NULL;
|
|
}
|
|
|
|
desc->flags = 0;
|
|
}
|
|
|
|
bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
|
|
|
|
ring->queued = 0;
|
|
ring->cur = ring->next = ring->stat = 0;
|
|
}
|
|
|
|
static void
|
|
rt2661_free_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring)
|
|
{
|
|
struct rt2661_tx_data *data;
|
|
int i;
|
|
|
|
if (ring->desc != NULL) {
|
|
bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
|
|
bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
|
|
}
|
|
|
|
if (ring->desc_dmat != NULL)
|
|
bus_dma_tag_destroy(ring->desc_dmat);
|
|
|
|
if (ring->data != NULL) {
|
|
for (i = 0; i < ring->count; i++) {
|
|
data = &ring->data[i];
|
|
|
|
if (data->m != NULL) {
|
|
bus_dmamap_sync(ring->data_dmat, data->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(ring->data_dmat, data->map);
|
|
m_freem(data->m);
|
|
}
|
|
|
|
if (data->ni != NULL)
|
|
ieee80211_free_node(data->ni);
|
|
|
|
if (data->map != NULL)
|
|
bus_dmamap_destroy(ring->data_dmat, data->map);
|
|
}
|
|
|
|
free(ring->data, M_DEVBUF);
|
|
}
|
|
|
|
if (ring->data_dmat != NULL)
|
|
bus_dma_tag_destroy(ring->data_dmat);
|
|
}
|
|
|
|
static int
|
|
rt2661_alloc_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring,
|
|
int count)
|
|
{
|
|
struct rt2661_rx_desc *desc;
|
|
struct rt2661_rx_data *data;
|
|
bus_addr_t physaddr;
|
|
int i, error;
|
|
|
|
ring->count = count;
|
|
ring->cur = ring->next = 0;
|
|
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
count * RT2661_RX_DESC_SIZE, 1, count * RT2661_RX_DESC_SIZE,
|
|
0, NULL, NULL, &ring->desc_dmat);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create desc DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
|
|
BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not allocate DMA memory\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
|
|
count * RT2661_RX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr,
|
|
0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not load desc DMA map\n");
|
|
goto fail;
|
|
}
|
|
|
|
ring->data = malloc(count * sizeof (struct rt2661_rx_data), M_DEVBUF,
|
|
M_NOWAIT | M_ZERO);
|
|
if (ring->data == NULL) {
|
|
device_printf(sc->sc_dev, "could not allocate soft data\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Pre-allocate Rx buffers and populate Rx ring.
|
|
*/
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES,
|
|
1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create data DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < count; i++) {
|
|
desc = &sc->rxq.desc[i];
|
|
data = &sc->rxq.data[i];
|
|
|
|
error = bus_dmamap_create(ring->data_dmat, 0, &data->map);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not create DMA map\n");
|
|
goto fail;
|
|
}
|
|
|
|
data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (data->m == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"could not allocate rx mbuf\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_dmamap_load(ring->data_dmat, data->map,
|
|
mtod(data->m, void *), MCLBYTES, rt2661_dma_map_addr,
|
|
&physaddr, 0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not load rx buf DMA map");
|
|
goto fail;
|
|
}
|
|
|
|
desc->flags = htole32(RT2661_RX_BUSY);
|
|
desc->physaddr = htole32(physaddr);
|
|
}
|
|
|
|
bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
|
|
|
|
return 0;
|
|
|
|
fail: rt2661_free_rx_ring(sc, ring);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
rt2661_reset_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ring->count; i++)
|
|
ring->desc[i].flags = htole32(RT2661_RX_BUSY);
|
|
|
|
bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
|
|
|
|
ring->cur = ring->next = 0;
|
|
}
|
|
|
|
static void
|
|
rt2661_free_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring)
|
|
{
|
|
struct rt2661_rx_data *data;
|
|
int i;
|
|
|
|
if (ring->desc != NULL) {
|
|
bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
|
|
bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
|
|
}
|
|
|
|
if (ring->desc_dmat != NULL)
|
|
bus_dma_tag_destroy(ring->desc_dmat);
|
|
|
|
if (ring->data != NULL) {
|
|
for (i = 0; i < ring->count; i++) {
|
|
data = &ring->data[i];
|
|
|
|
if (data->m != NULL) {
|
|
bus_dmamap_sync(ring->data_dmat, data->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(ring->data_dmat, data->map);
|
|
m_freem(data->m);
|
|
}
|
|
|
|
if (data->map != NULL)
|
|
bus_dmamap_destroy(ring->data_dmat, data->map);
|
|
}
|
|
|
|
free(ring->data, M_DEVBUF);
|
|
}
|
|
|
|
if (ring->data_dmat != NULL)
|
|
bus_dma_tag_destroy(ring->data_dmat);
|
|
}
|
|
|
|
static int
|
|
rt2661_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
|
|
{
|
|
struct rt2661_vap *rvp = RT2661_VAP(vap);
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
int error;
|
|
|
|
if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) {
|
|
uint32_t tmp;
|
|
|
|
/* abort TSF synchronization */
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR9);
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0x00ffffff);
|
|
}
|
|
|
|
error = rvp->ral_newstate(vap, nstate, arg);
|
|
|
|
if (error == 0 && nstate == IEEE80211_S_RUN) {
|
|
struct ieee80211_node *ni = vap->iv_bss;
|
|
|
|
if (vap->iv_opmode != IEEE80211_M_MONITOR) {
|
|
rt2661_enable_mrr(sc);
|
|
rt2661_set_txpreamble(sc);
|
|
rt2661_set_basicrates(sc, &ni->ni_rates);
|
|
rt2661_set_bssid(sc, ni->ni_bssid);
|
|
}
|
|
|
|
if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
|
|
vap->iv_opmode == IEEE80211_M_IBSS ||
|
|
vap->iv_opmode == IEEE80211_M_MBSS) {
|
|
error = rt2661_prepare_beacon(sc, vap);
|
|
if (error != 0)
|
|
return error;
|
|
}
|
|
if (vap->iv_opmode != IEEE80211_M_MONITOR)
|
|
rt2661_enable_tsf_sync(sc);
|
|
else
|
|
rt2661_enable_tsf(sc);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or
|
|
* 93C66).
|
|
*/
|
|
static uint16_t
|
|
rt2661_eeprom_read(struct rt2661_softc *sc, uint8_t addr)
|
|
{
|
|
uint32_t tmp;
|
|
uint16_t val;
|
|
int n;
|
|
|
|
/* clock C once before the first command */
|
|
RT2661_EEPROM_CTL(sc, 0);
|
|
|
|
RT2661_EEPROM_CTL(sc, RT2661_S);
|
|
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C);
|
|
RT2661_EEPROM_CTL(sc, RT2661_S);
|
|
|
|
/* write start bit (1) */
|
|
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D);
|
|
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C);
|
|
|
|
/* write READ opcode (10) */
|
|
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D);
|
|
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C);
|
|
RT2661_EEPROM_CTL(sc, RT2661_S);
|
|
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C);
|
|
|
|
/* write address (A5-A0 or A7-A0) */
|
|
n = (RAL_READ(sc, RT2661_E2PROM_CSR) & RT2661_93C46) ? 5 : 7;
|
|
for (; n >= 0; n--) {
|
|
RT2661_EEPROM_CTL(sc, RT2661_S |
|
|
(((addr >> n) & 1) << RT2661_SHIFT_D));
|
|
RT2661_EEPROM_CTL(sc, RT2661_S |
|
|
(((addr >> n) & 1) << RT2661_SHIFT_D) | RT2661_C);
|
|
}
|
|
|
|
RT2661_EEPROM_CTL(sc, RT2661_S);
|
|
|
|
/* read data Q15-Q0 */
|
|
val = 0;
|
|
for (n = 15; n >= 0; n--) {
|
|
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C);
|
|
tmp = RAL_READ(sc, RT2661_E2PROM_CSR);
|
|
val |= ((tmp & RT2661_Q) >> RT2661_SHIFT_Q) << n;
|
|
RT2661_EEPROM_CTL(sc, RT2661_S);
|
|
}
|
|
|
|
RT2661_EEPROM_CTL(sc, 0);
|
|
|
|
/* clear Chip Select and clock C */
|
|
RT2661_EEPROM_CTL(sc, RT2661_S);
|
|
RT2661_EEPROM_CTL(sc, 0);
|
|
RT2661_EEPROM_CTL(sc, RT2661_C);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void
|
|
rt2661_tx_intr(struct rt2661_softc *sc)
|
|
{
|
|
struct ieee80211_ratectl_tx_status *txs = &sc->sc_txs;
|
|
struct rt2661_tx_ring *txq;
|
|
struct rt2661_tx_data *data;
|
|
uint32_t val;
|
|
int error, qid;
|
|
|
|
txs->flags = IEEE80211_RATECTL_TX_FAIL_LONG;
|
|
for (;;) {
|
|
struct ieee80211_node *ni;
|
|
struct mbuf *m;
|
|
|
|
val = RAL_READ(sc, RT2661_STA_CSR4);
|
|
if (!(val & RT2661_TX_STAT_VALID))
|
|
break;
|
|
|
|
/* retrieve the queue in which this frame was sent */
|
|
qid = RT2661_TX_QID(val);
|
|
txq = (qid <= 3) ? &sc->txq[qid] : &sc->mgtq;
|
|
|
|
/* retrieve rate control algorithm context */
|
|
data = &txq->data[txq->stat];
|
|
m = data->m;
|
|
data->m = NULL;
|
|
ni = data->ni;
|
|
data->ni = NULL;
|
|
|
|
/* if no frame has been sent, ignore */
|
|
if (ni == NULL)
|
|
continue;
|
|
|
|
switch (RT2661_TX_RESULT(val)) {
|
|
case RT2661_TX_SUCCESS:
|
|
txs->status = IEEE80211_RATECTL_TX_SUCCESS;
|
|
txs->long_retries = RT2661_TX_RETRYCNT(val);
|
|
|
|
DPRINTFN(sc, 10, "data frame sent successfully after "
|
|
"%d retries\n", txs->long_retries);
|
|
if (data->rix != IEEE80211_FIXED_RATE_NONE)
|
|
ieee80211_ratectl_tx_complete(ni, txs);
|
|
error = 0;
|
|
break;
|
|
|
|
case RT2661_TX_RETRY_FAIL:
|
|
txs->status = IEEE80211_RATECTL_TX_FAIL_LONG;
|
|
txs->long_retries = RT2661_TX_RETRYCNT(val);
|
|
|
|
DPRINTFN(sc, 9, "%s\n",
|
|
"sending data frame failed (too much retries)");
|
|
if (data->rix != IEEE80211_FIXED_RATE_NONE)
|
|
ieee80211_ratectl_tx_complete(ni, txs);
|
|
error = 1;
|
|
break;
|
|
|
|
default:
|
|
/* other failure */
|
|
device_printf(sc->sc_dev,
|
|
"sending data frame failed 0x%08x\n", val);
|
|
error = 1;
|
|
}
|
|
|
|
DPRINTFN(sc, 15, "tx done q=%d idx=%u\n", qid, txq->stat);
|
|
|
|
txq->queued--;
|
|
if (++txq->stat >= txq->count) /* faster than % count */
|
|
txq->stat = 0;
|
|
|
|
ieee80211_tx_complete(ni, m, error);
|
|
}
|
|
|
|
sc->sc_tx_timer = 0;
|
|
|
|
rt2661_start(sc);
|
|
}
|
|
|
|
static void
|
|
rt2661_tx_dma_intr(struct rt2661_softc *sc, struct rt2661_tx_ring *txq)
|
|
{
|
|
struct rt2661_tx_desc *desc;
|
|
struct rt2661_tx_data *data;
|
|
|
|
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_POSTREAD);
|
|
|
|
for (;;) {
|
|
desc = &txq->desc[txq->next];
|
|
data = &txq->data[txq->next];
|
|
|
|
if ((le32toh(desc->flags) & RT2661_TX_BUSY) ||
|
|
!(le32toh(desc->flags) & RT2661_TX_VALID))
|
|
break;
|
|
|
|
bus_dmamap_sync(txq->data_dmat, data->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txq->data_dmat, data->map);
|
|
|
|
/* descriptor is no longer valid */
|
|
desc->flags &= ~htole32(RT2661_TX_VALID);
|
|
|
|
DPRINTFN(sc, 15, "tx dma done q=%p idx=%u\n", txq, txq->next);
|
|
|
|
if (++txq->next >= txq->count) /* faster than % count */
|
|
txq->next = 0;
|
|
}
|
|
|
|
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
static void
|
|
rt2661_rx_intr(struct rt2661_softc *sc)
|
|
{
|
|
struct epoch_tracker et;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct rt2661_rx_desc *desc;
|
|
struct rt2661_rx_data *data;
|
|
bus_addr_t physaddr;
|
|
struct ieee80211_frame *wh;
|
|
struct ieee80211_node *ni;
|
|
struct mbuf *mnew, *m;
|
|
int error;
|
|
|
|
bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
|
|
for (;;) {
|
|
int8_t rssi, nf;
|
|
|
|
desc = &sc->rxq.desc[sc->rxq.cur];
|
|
data = &sc->rxq.data[sc->rxq.cur];
|
|
|
|
if (le32toh(desc->flags) & RT2661_RX_BUSY)
|
|
break;
|
|
|
|
if ((le32toh(desc->flags) & RT2661_RX_PHY_ERROR) ||
|
|
(le32toh(desc->flags) & RT2661_RX_CRC_ERROR)) {
|
|
/*
|
|
* This should not happen since we did not request
|
|
* to receive those frames when we filled TXRX_CSR0.
|
|
*/
|
|
DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n",
|
|
le32toh(desc->flags));
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
goto skip;
|
|
}
|
|
|
|
if ((le32toh(desc->flags) & RT2661_RX_CIPHER_MASK) != 0) {
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
goto skip;
|
|
}
|
|
|
|
/*
|
|
* Try to allocate a new mbuf for this ring element and load it
|
|
* before processing the current mbuf. If the ring element
|
|
* cannot be loaded, drop the received packet and reuse the old
|
|
* mbuf. In the unlikely case that the old mbuf can't be
|
|
* reloaded either, explicitly panic.
|
|
*/
|
|
mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (mnew == NULL) {
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
goto skip;
|
|
}
|
|
|
|
bus_dmamap_sync(sc->rxq.data_dmat, data->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->rxq.data_dmat, data->map);
|
|
|
|
error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
|
|
mtod(mnew, void *), MCLBYTES, rt2661_dma_map_addr,
|
|
&physaddr, 0);
|
|
if (error != 0) {
|
|
m_freem(mnew);
|
|
|
|
/* try to reload the old mbuf */
|
|
error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
|
|
mtod(data->m, void *), MCLBYTES,
|
|
rt2661_dma_map_addr, &physaddr, 0);
|
|
if (error != 0) {
|
|
/* very unlikely that it will fail... */
|
|
panic("%s: could not load old rx mbuf",
|
|
device_get_name(sc->sc_dev));
|
|
}
|
|
counter_u64_add(ic->ic_ierrors, 1);
|
|
goto skip;
|
|
}
|
|
|
|
/*
|
|
* New mbuf successfully loaded, update Rx ring and continue
|
|
* processing.
|
|
*/
|
|
m = data->m;
|
|
data->m = mnew;
|
|
desc->physaddr = htole32(physaddr);
|
|
|
|
/* finalize mbuf */
|
|
m->m_pkthdr.len = m->m_len =
|
|
(le32toh(desc->flags) >> 16) & 0xfff;
|
|
|
|
rssi = rt2661_get_rssi(sc, desc->rssi);
|
|
/* Error happened during RSSI conversion. */
|
|
if (rssi < 0)
|
|
rssi = -30; /* XXX ignored by net80211 */
|
|
nf = RT2661_NOISE_FLOOR;
|
|
|
|
if (ieee80211_radiotap_active(ic)) {
|
|
struct rt2661_rx_radiotap_header *tap = &sc->sc_rxtap;
|
|
uint32_t tsf_lo, tsf_hi;
|
|
|
|
/* get timestamp (low and high 32 bits) */
|
|
tsf_hi = RAL_READ(sc, RT2661_TXRX_CSR13);
|
|
tsf_lo = RAL_READ(sc, RT2661_TXRX_CSR12);
|
|
|
|
tap->wr_tsf =
|
|
htole64(((uint64_t)tsf_hi << 32) | tsf_lo);
|
|
tap->wr_flags = 0;
|
|
tap->wr_rate = ieee80211_plcp2rate(desc->rate,
|
|
(desc->flags & htole32(RT2661_RX_OFDM)) ?
|
|
IEEE80211_T_OFDM : IEEE80211_T_CCK);
|
|
tap->wr_antsignal = nf + rssi;
|
|
tap->wr_antnoise = nf;
|
|
}
|
|
sc->sc_flags |= RAL_INPUT_RUNNING;
|
|
RAL_UNLOCK(sc);
|
|
wh = mtod(m, struct ieee80211_frame *);
|
|
|
|
/* send the frame to the 802.11 layer */
|
|
ni = ieee80211_find_rxnode(ic,
|
|
(struct ieee80211_frame_min *)wh);
|
|
NET_EPOCH_ENTER(et);
|
|
if (ni != NULL) {
|
|
(void) ieee80211_input(ni, m, rssi, nf);
|
|
ieee80211_free_node(ni);
|
|
} else
|
|
(void) ieee80211_input_all(ic, m, rssi, nf);
|
|
NET_EPOCH_EXIT(et);
|
|
|
|
RAL_LOCK(sc);
|
|
sc->sc_flags &= ~RAL_INPUT_RUNNING;
|
|
|
|
skip: desc->flags |= htole32(RT2661_RX_BUSY);
|
|
|
|
DPRINTFN(sc, 15, "rx intr idx=%u\n", sc->rxq.cur);
|
|
|
|
sc->rxq.cur = (sc->rxq.cur + 1) % RT2661_RX_RING_COUNT;
|
|
}
|
|
|
|
bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
|
|
BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
/* ARGSUSED */
|
|
static void
|
|
rt2661_mcu_beacon_expire(struct rt2661_softc *sc)
|
|
{
|
|
/* do nothing */
|
|
}
|
|
|
|
static void
|
|
rt2661_mcu_wakeup(struct rt2661_softc *sc)
|
|
{
|
|
RAL_WRITE(sc, RT2661_MAC_CSR11, 5 << 16);
|
|
|
|
RAL_WRITE(sc, RT2661_SOFT_RESET_CSR, 0x7);
|
|
RAL_WRITE(sc, RT2661_IO_CNTL_CSR, 0x18);
|
|
RAL_WRITE(sc, RT2661_PCI_USEC_CSR, 0x20);
|
|
|
|
/* send wakeup command to MCU */
|
|
rt2661_tx_cmd(sc, RT2661_MCU_CMD_WAKEUP, 0);
|
|
}
|
|
|
|
static void
|
|
rt2661_mcu_cmd_intr(struct rt2661_softc *sc)
|
|
{
|
|
RAL_READ(sc, RT2661_M2H_CMD_DONE_CSR);
|
|
RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff);
|
|
}
|
|
|
|
void
|
|
rt2661_intr(void *arg)
|
|
{
|
|
struct rt2661_softc *sc = arg;
|
|
uint32_t r1, r2;
|
|
|
|
RAL_LOCK(sc);
|
|
|
|
/* disable MAC and MCU interrupts */
|
|
RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f);
|
|
RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff);
|
|
|
|
/* don't re-enable interrupts if we're shutting down */
|
|
if (!(sc->sc_flags & RAL_RUNNING)) {
|
|
RAL_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
r1 = RAL_READ(sc, RT2661_INT_SOURCE_CSR);
|
|
RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, r1);
|
|
|
|
r2 = RAL_READ(sc, RT2661_MCU_INT_SOURCE_CSR);
|
|
RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, r2);
|
|
|
|
if (r1 & RT2661_MGT_DONE)
|
|
rt2661_tx_dma_intr(sc, &sc->mgtq);
|
|
|
|
if (r1 & RT2661_RX_DONE)
|
|
rt2661_rx_intr(sc);
|
|
|
|
if (r1 & RT2661_TX0_DMA_DONE)
|
|
rt2661_tx_dma_intr(sc, &sc->txq[0]);
|
|
|
|
if (r1 & RT2661_TX1_DMA_DONE)
|
|
rt2661_tx_dma_intr(sc, &sc->txq[1]);
|
|
|
|
if (r1 & RT2661_TX2_DMA_DONE)
|
|
rt2661_tx_dma_intr(sc, &sc->txq[2]);
|
|
|
|
if (r1 & RT2661_TX3_DMA_DONE)
|
|
rt2661_tx_dma_intr(sc, &sc->txq[3]);
|
|
|
|
if (r1 & RT2661_TX_DONE)
|
|
rt2661_tx_intr(sc);
|
|
|
|
if (r2 & RT2661_MCU_CMD_DONE)
|
|
rt2661_mcu_cmd_intr(sc);
|
|
|
|
if (r2 & RT2661_MCU_BEACON_EXPIRE)
|
|
rt2661_mcu_beacon_expire(sc);
|
|
|
|
if (r2 & RT2661_MCU_WAKEUP)
|
|
rt2661_mcu_wakeup(sc);
|
|
|
|
/* re-enable MAC and MCU interrupts */
|
|
RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10);
|
|
RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0);
|
|
|
|
RAL_UNLOCK(sc);
|
|
}
|
|
|
|
static uint8_t
|
|
rt2661_plcp_signal(int rate)
|
|
{
|
|
switch (rate) {
|
|
/* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
|
|
case 12: return 0xb;
|
|
case 18: return 0xf;
|
|
case 24: return 0xa;
|
|
case 36: return 0xe;
|
|
case 48: return 0x9;
|
|
case 72: return 0xd;
|
|
case 96: return 0x8;
|
|
case 108: return 0xc;
|
|
|
|
/* CCK rates (NB: not IEEE std, device-specific) */
|
|
case 2: return 0x0;
|
|
case 4: return 0x1;
|
|
case 11: return 0x2;
|
|
case 22: return 0x3;
|
|
}
|
|
return 0xff; /* XXX unsupported/unknown rate */
|
|
}
|
|
|
|
static void
|
|
rt2661_setup_tx_desc(struct rt2661_softc *sc, struct rt2661_tx_desc *desc,
|
|
uint32_t flags, uint16_t xflags, int len, int rate,
|
|
const bus_dma_segment_t *segs, int nsegs, int ac)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint16_t plcp_length;
|
|
int i, remainder;
|
|
|
|
desc->flags = htole32(flags);
|
|
desc->flags |= htole32(len << 16);
|
|
desc->flags |= htole32(RT2661_TX_BUSY | RT2661_TX_VALID);
|
|
|
|
desc->xflags = htole16(xflags);
|
|
desc->xflags |= htole16(nsegs << 13);
|
|
|
|
desc->wme = htole16(
|
|
RT2661_QID(ac) |
|
|
RT2661_AIFSN(2) |
|
|
RT2661_LOGCWMIN(4) |
|
|
RT2661_LOGCWMAX(10));
|
|
|
|
/*
|
|
* Remember in which queue this frame was sent. This field is driver
|
|
* private data only. It will be made available by the NIC in STA_CSR4
|
|
* on Tx interrupts.
|
|
*/
|
|
desc->qid = ac;
|
|
|
|
/* setup PLCP fields */
|
|
desc->plcp_signal = rt2661_plcp_signal(rate);
|
|
desc->plcp_service = 4;
|
|
|
|
len += IEEE80211_CRC_LEN;
|
|
if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) {
|
|
desc->flags |= htole32(RT2661_TX_OFDM);
|
|
|
|
plcp_length = len & 0xfff;
|
|
desc->plcp_length_hi = plcp_length >> 6;
|
|
desc->plcp_length_lo = plcp_length & 0x3f;
|
|
} else {
|
|
plcp_length = howmany(16 * len, rate);
|
|
if (rate == 22) {
|
|
remainder = (16 * len) % 22;
|
|
if (remainder != 0 && remainder < 7)
|
|
desc->plcp_service |= RT2661_PLCP_LENGEXT;
|
|
}
|
|
desc->plcp_length_hi = plcp_length >> 8;
|
|
desc->plcp_length_lo = plcp_length & 0xff;
|
|
|
|
if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
|
|
desc->plcp_signal |= 0x08;
|
|
}
|
|
|
|
/* RT2x61 supports scatter with up to 5 segments */
|
|
for (i = 0; i < nsegs; i++) {
|
|
desc->addr[i] = htole32(segs[i].ds_addr);
|
|
desc->len [i] = htole16(segs[i].ds_len);
|
|
}
|
|
}
|
|
|
|
static int
|
|
rt2661_tx_mgt(struct rt2661_softc *sc, struct mbuf *m0,
|
|
struct ieee80211_node *ni)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct rt2661_tx_desc *desc;
|
|
struct rt2661_tx_data *data;
|
|
struct ieee80211_frame *wh;
|
|
struct ieee80211_key *k;
|
|
bus_dma_segment_t segs[RT2661_MAX_SCATTER];
|
|
uint16_t dur;
|
|
uint32_t flags = 0; /* XXX HWSEQ */
|
|
int nsegs, rate, error;
|
|
|
|
desc = &sc->mgtq.desc[sc->mgtq.cur];
|
|
data = &sc->mgtq.data[sc->mgtq.cur];
|
|
|
|
rate = ni->ni_txparms->mgmtrate;
|
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
|
|
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
|
|
k = ieee80211_crypto_encap(ni, m0);
|
|
if (k == NULL) {
|
|
m_freem(m0);
|
|
return ENOBUFS;
|
|
}
|
|
}
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->mgtq.data_dmat, data->map, m0,
|
|
segs, &nsegs, 0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
|
|
error);
|
|
m_freem(m0);
|
|
return error;
|
|
}
|
|
|
|
if (ieee80211_radiotap_active_vap(vap)) {
|
|
struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap;
|
|
|
|
tap->wt_flags = 0;
|
|
tap->wt_rate = rate;
|
|
|
|
ieee80211_radiotap_tx(vap, m0);
|
|
}
|
|
|
|
data->m = m0;
|
|
data->ni = ni;
|
|
/* management frames are not taken into account for amrr */
|
|
data->rix = IEEE80211_FIXED_RATE_NONE;
|
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
|
|
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
flags |= RT2661_TX_NEED_ACK;
|
|
|
|
dur = ieee80211_ack_duration(ic->ic_rt,
|
|
rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE);
|
|
*(uint16_t *)wh->i_dur = htole16(dur);
|
|
|
|
/* tell hardware to add timestamp in probe responses */
|
|
if ((wh->i_fc[0] &
|
|
(IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
|
|
(IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP))
|
|
flags |= RT2661_TX_TIMESTAMP;
|
|
}
|
|
|
|
rt2661_setup_tx_desc(sc, desc, flags, 0 /* XXX HWSEQ */,
|
|
m0->m_pkthdr.len, rate, segs, nsegs, RT2661_QID_MGT);
|
|
|
|
bus_dmamap_sync(sc->mgtq.data_dmat, data->map, BUS_DMASYNC_PREWRITE);
|
|
bus_dmamap_sync(sc->mgtq.desc_dmat, sc->mgtq.desc_map,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n",
|
|
m0->m_pkthdr.len, sc->mgtq.cur, rate);
|
|
|
|
/* kick mgt */
|
|
sc->mgtq.queued++;
|
|
sc->mgtq.cur = (sc->mgtq.cur + 1) % RT2661_MGT_RING_COUNT;
|
|
RAL_WRITE(sc, RT2661_TX_CNTL_CSR, RT2661_KICK_MGT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rt2661_sendprot(struct rt2661_softc *sc, int ac,
|
|
const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate)
|
|
{
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct rt2661_tx_ring *txq = &sc->txq[ac];
|
|
struct rt2661_tx_desc *desc;
|
|
struct rt2661_tx_data *data;
|
|
struct mbuf *mprot;
|
|
int protrate, flags, error;
|
|
bus_dma_segment_t segs[RT2661_MAX_SCATTER];
|
|
int nsegs;
|
|
|
|
mprot = ieee80211_alloc_prot(ni, m, rate, prot);
|
|
if (mprot == NULL) {
|
|
if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1);
|
|
device_printf(sc->sc_dev,
|
|
"could not allocate mbuf for protection mode %d\n", prot);
|
|
return ENOBUFS;
|
|
}
|
|
|
|
data = &txq->data[txq->cur];
|
|
desc = &txq->desc[txq->cur];
|
|
|
|
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, mprot, segs,
|
|
&nsegs, 0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not map mbuf (error %d)\n", error);
|
|
m_freem(mprot);
|
|
return error;
|
|
}
|
|
|
|
data->m = mprot;
|
|
data->ni = ieee80211_ref_node(ni);
|
|
/* ctl frames are not taken into account for amrr */
|
|
data->rix = IEEE80211_FIXED_RATE_NONE;
|
|
|
|
protrate = ieee80211_ctl_rate(ic->ic_rt, rate);
|
|
flags = RT2661_TX_MORE_FRAG;
|
|
if (prot == IEEE80211_PROT_RTSCTS)
|
|
flags |= RT2661_TX_NEED_ACK;
|
|
|
|
rt2661_setup_tx_desc(sc, desc, flags, 0, mprot->m_pkthdr.len,
|
|
protrate, segs, 1, ac);
|
|
|
|
bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
|
|
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE);
|
|
|
|
txq->queued++;
|
|
txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0,
|
|
struct ieee80211_node *ni, int ac)
|
|
{
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct rt2661_tx_ring *txq = &sc->txq[ac];
|
|
struct rt2661_tx_desc *desc;
|
|
struct rt2661_tx_data *data;
|
|
struct ieee80211_frame *wh;
|
|
const struct ieee80211_txparam *tp = ni->ni_txparms;
|
|
struct ieee80211_key *k;
|
|
struct mbuf *mnew;
|
|
bus_dma_segment_t segs[RT2661_MAX_SCATTER];
|
|
uint16_t dur;
|
|
uint32_t flags;
|
|
int error, nsegs, rate, noack = 0;
|
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
|
|
if (m0->m_flags & M_EAPOL) {
|
|
rate = tp->mgmtrate;
|
|
} else if (IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
rate = tp->mcastrate;
|
|
} else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
|
|
rate = tp->ucastrate;
|
|
} else {
|
|
(void) ieee80211_ratectl_rate(ni, NULL, 0);
|
|
rate = ni->ni_txrate;
|
|
}
|
|
rate &= IEEE80211_RATE_VAL;
|
|
|
|
if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS_DATA)
|
|
noack = !! ieee80211_wme_vap_ac_is_noack(vap, ac);
|
|
|
|
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
|
|
k = ieee80211_crypto_encap(ni, m0);
|
|
if (k == NULL) {
|
|
m_freem(m0);
|
|
return ENOBUFS;
|
|
}
|
|
|
|
/* packet header may have moved, reset our local pointer */
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
}
|
|
|
|
flags = 0;
|
|
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
int prot = IEEE80211_PROT_NONE;
|
|
if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold)
|
|
prot = IEEE80211_PROT_RTSCTS;
|
|
else if ((ic->ic_flags & IEEE80211_F_USEPROT) &&
|
|
ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM)
|
|
prot = ic->ic_protmode;
|
|
if (prot != IEEE80211_PROT_NONE) {
|
|
error = rt2661_sendprot(sc, ac, m0, ni, prot, rate);
|
|
if (error) {
|
|
m_freem(m0);
|
|
return error;
|
|
}
|
|
flags |= RT2661_TX_LONG_RETRY | RT2661_TX_IFS;
|
|
}
|
|
}
|
|
|
|
data = &txq->data[txq->cur];
|
|
desc = &txq->desc[txq->cur];
|
|
|
|
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs,
|
|
&nsegs, 0);
|
|
if (error != 0 && error != EFBIG) {
|
|
device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
|
|
error);
|
|
m_freem(m0);
|
|
return error;
|
|
}
|
|
if (error != 0) {
|
|
mnew = m_defrag(m0, M_NOWAIT);
|
|
if (mnew == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"could not defragment mbuf\n");
|
|
m_freem(m0);
|
|
return ENOBUFS;
|
|
}
|
|
m0 = mnew;
|
|
|
|
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0,
|
|
segs, &nsegs, 0);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"could not map mbuf (error %d)\n", error);
|
|
m_freem(m0);
|
|
return error;
|
|
}
|
|
|
|
/* packet header have moved, reset our local pointer */
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
}
|
|
|
|
if (ieee80211_radiotap_active_vap(vap)) {
|
|
struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap;
|
|
|
|
tap->wt_flags = 0;
|
|
tap->wt_rate = rate;
|
|
|
|
ieee80211_radiotap_tx(vap, m0);
|
|
}
|
|
|
|
data->m = m0;
|
|
data->ni = ni;
|
|
|
|
/* remember link conditions for rate adaptation algorithm */
|
|
if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) {
|
|
data->rix = ni->ni_txrate;
|
|
/* XXX probably need last rssi value and not avg */
|
|
data->rssi = ic->ic_node_getrssi(ni);
|
|
} else
|
|
data->rix = IEEE80211_FIXED_RATE_NONE;
|
|
|
|
if (!noack && !IEEE80211_IS_MULTICAST(wh->i_addr1)) {
|
|
flags |= RT2661_TX_NEED_ACK;
|
|
|
|
dur = ieee80211_ack_duration(ic->ic_rt,
|
|
rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE);
|
|
*(uint16_t *)wh->i_dur = htole16(dur);
|
|
}
|
|
|
|
rt2661_setup_tx_desc(sc, desc, flags, 0, m0->m_pkthdr.len, rate, segs,
|
|
nsegs, ac);
|
|
|
|
bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
|
|
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE);
|
|
|
|
DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n",
|
|
m0->m_pkthdr.len, txq->cur, rate);
|
|
|
|
/* kick Tx */
|
|
txq->queued++;
|
|
txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT;
|
|
RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 1 << ac);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rt2661_transmit(struct ieee80211com *ic, struct mbuf *m)
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
int error;
|
|
|
|
RAL_LOCK(sc);
|
|
if ((sc->sc_flags & RAL_RUNNING) == 0) {
|
|
RAL_UNLOCK(sc);
|
|
return (ENXIO);
|
|
}
|
|
error = mbufq_enqueue(&sc->sc_snd, m);
|
|
if (error) {
|
|
RAL_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
rt2661_start(sc);
|
|
RAL_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
rt2661_start(struct rt2661_softc *sc)
|
|
{
|
|
struct mbuf *m;
|
|
struct ieee80211_node *ni;
|
|
int ac;
|
|
|
|
RAL_LOCK_ASSERT(sc);
|
|
|
|
/* prevent management frames from being sent if we're not ready */
|
|
if (!(sc->sc_flags & RAL_RUNNING) || sc->sc_invalid)
|
|
return;
|
|
|
|
while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) {
|
|
ac = M_WME_GETAC(m);
|
|
if (sc->txq[ac].queued >= RT2661_TX_RING_COUNT - 1) {
|
|
/* there is no place left in this ring */
|
|
mbufq_prepend(&sc->sc_snd, m);
|
|
break;
|
|
}
|
|
ni = (struct ieee80211_node *) m->m_pkthdr.rcvif;
|
|
if (rt2661_tx_data(sc, m, ni, ac) != 0) {
|
|
if_inc_counter(ni->ni_vap->iv_ifp,
|
|
IFCOUNTER_OERRORS, 1);
|
|
ieee80211_free_node(ni);
|
|
break;
|
|
}
|
|
sc->sc_tx_timer = 5;
|
|
}
|
|
}
|
|
|
|
static int
|
|
rt2661_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
|
|
const struct ieee80211_bpf_params *params)
|
|
{
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
|
|
RAL_LOCK(sc);
|
|
|
|
/* prevent management frames from being sent if we're not ready */
|
|
if (!(sc->sc_flags & RAL_RUNNING)) {
|
|
RAL_UNLOCK(sc);
|
|
m_freem(m);
|
|
return ENETDOWN;
|
|
}
|
|
if (sc->mgtq.queued >= RT2661_MGT_RING_COUNT) {
|
|
RAL_UNLOCK(sc);
|
|
m_freem(m);
|
|
return ENOBUFS; /* XXX */
|
|
}
|
|
|
|
/*
|
|
* Legacy path; interpret frame contents to decide
|
|
* precisely how to send the frame.
|
|
* XXX raw path
|
|
*/
|
|
if (rt2661_tx_mgt(sc, m, ni) != 0)
|
|
goto bad;
|
|
sc->sc_tx_timer = 5;
|
|
|
|
RAL_UNLOCK(sc);
|
|
|
|
return 0;
|
|
bad:
|
|
RAL_UNLOCK(sc);
|
|
return EIO; /* XXX */
|
|
}
|
|
|
|
static void
|
|
rt2661_watchdog(void *arg)
|
|
{
|
|
struct rt2661_softc *sc = (struct rt2661_softc *)arg;
|
|
|
|
RAL_LOCK_ASSERT(sc);
|
|
|
|
KASSERT(sc->sc_flags & RAL_RUNNING, ("not running"));
|
|
|
|
if (sc->sc_invalid) /* card ejected */
|
|
return;
|
|
|
|
if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) {
|
|
device_printf(sc->sc_dev, "device timeout\n");
|
|
rt2661_init_locked(sc);
|
|
counter_u64_add(sc->sc_ic.ic_oerrors, 1);
|
|
/* NB: callout is reset in rt2661_init() */
|
|
return;
|
|
}
|
|
callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc);
|
|
}
|
|
|
|
static void
|
|
rt2661_parent(struct ieee80211com *ic)
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
int startall = 0;
|
|
|
|
RAL_LOCK(sc);
|
|
if (ic->ic_nrunning > 0) {
|
|
if ((sc->sc_flags & RAL_RUNNING) == 0) {
|
|
rt2661_init_locked(sc);
|
|
startall = 1;
|
|
} else
|
|
rt2661_update_promisc(ic);
|
|
} else if (sc->sc_flags & RAL_RUNNING)
|
|
rt2661_stop_locked(sc);
|
|
RAL_UNLOCK(sc);
|
|
if (startall)
|
|
ieee80211_start_all(ic);
|
|
}
|
|
|
|
static void
|
|
rt2661_bbp_write(struct rt2661_softc *sc, uint8_t reg, uint8_t val)
|
|
{
|
|
uint32_t tmp;
|
|
int ntries;
|
|
|
|
for (ntries = 0; ntries < 100; ntries++) {
|
|
if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY))
|
|
break;
|
|
DELAY(1);
|
|
}
|
|
if (ntries == 100) {
|
|
device_printf(sc->sc_dev, "could not write to BBP\n");
|
|
return;
|
|
}
|
|
|
|
tmp = RT2661_BBP_BUSY | (reg & 0x7f) << 8 | val;
|
|
RAL_WRITE(sc, RT2661_PHY_CSR3, tmp);
|
|
|
|
DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val);
|
|
}
|
|
|
|
static uint8_t
|
|
rt2661_bbp_read(struct rt2661_softc *sc, uint8_t reg)
|
|
{
|
|
uint32_t val;
|
|
int ntries;
|
|
|
|
for (ntries = 0; ntries < 100; ntries++) {
|
|
if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY))
|
|
break;
|
|
DELAY(1);
|
|
}
|
|
if (ntries == 100) {
|
|
device_printf(sc->sc_dev, "could not read from BBP\n");
|
|
return 0;
|
|
}
|
|
|
|
val = RT2661_BBP_BUSY | RT2661_BBP_READ | reg << 8;
|
|
RAL_WRITE(sc, RT2661_PHY_CSR3, val);
|
|
|
|
for (ntries = 0; ntries < 100; ntries++) {
|
|
val = RAL_READ(sc, RT2661_PHY_CSR3);
|
|
if (!(val & RT2661_BBP_BUSY))
|
|
return val & 0xff;
|
|
DELAY(1);
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "could not read from BBP\n");
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
rt2661_rf_write(struct rt2661_softc *sc, uint8_t reg, uint32_t val)
|
|
{
|
|
uint32_t tmp;
|
|
int ntries;
|
|
|
|
for (ntries = 0; ntries < 100; ntries++) {
|
|
if (!(RAL_READ(sc, RT2661_PHY_CSR4) & RT2661_RF_BUSY))
|
|
break;
|
|
DELAY(1);
|
|
}
|
|
if (ntries == 100) {
|
|
device_printf(sc->sc_dev, "could not write to RF\n");
|
|
return;
|
|
}
|
|
|
|
tmp = RT2661_RF_BUSY | RT2661_RF_21BIT | (val & 0x1fffff) << 2 |
|
|
(reg & 3);
|
|
RAL_WRITE(sc, RT2661_PHY_CSR4, tmp);
|
|
|
|
/* remember last written value in sc */
|
|
sc->rf_regs[reg] = val;
|
|
|
|
DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0x1fffff);
|
|
}
|
|
|
|
static int
|
|
rt2661_tx_cmd(struct rt2661_softc *sc, uint8_t cmd, uint16_t arg)
|
|
{
|
|
if (RAL_READ(sc, RT2661_H2M_MAILBOX_CSR) & RT2661_H2M_BUSY)
|
|
return EIO; /* there is already a command pending */
|
|
|
|
RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR,
|
|
RT2661_H2M_BUSY | RT2661_TOKEN_NO_INTR << 16 | arg);
|
|
|
|
RAL_WRITE(sc, RT2661_HOST_CMD_CSR, RT2661_KICK_CMD | cmd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
rt2661_select_antenna(struct rt2661_softc *sc)
|
|
{
|
|
uint8_t bbp4, bbp77;
|
|
uint32_t tmp;
|
|
|
|
bbp4 = rt2661_bbp_read(sc, 4);
|
|
bbp77 = rt2661_bbp_read(sc, 77);
|
|
|
|
/* TBD */
|
|
|
|
/* make sure Rx is disabled before switching antenna */
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR0);
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX);
|
|
|
|
rt2661_bbp_write(sc, 4, bbp4);
|
|
rt2661_bbp_write(sc, 77, bbp77);
|
|
|
|
/* restore Rx filter */
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp);
|
|
}
|
|
|
|
/*
|
|
* Enable multi-rate retries for frames sent at OFDM rates.
|
|
* In 802.11b/g mode, allow fallback to CCK rates.
|
|
*/
|
|
static void
|
|
rt2661_enable_mrr(struct rt2661_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint32_t tmp;
|
|
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR4);
|
|
|
|
tmp &= ~RT2661_MRR_CCK_FALLBACK;
|
|
if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan))
|
|
tmp |= RT2661_MRR_CCK_FALLBACK;
|
|
tmp |= RT2661_MRR_ENABLED;
|
|
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp);
|
|
}
|
|
|
|
static void
|
|
rt2661_set_txpreamble(struct rt2661_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint32_t tmp;
|
|
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR4);
|
|
|
|
tmp &= ~RT2661_SHORT_PREAMBLE;
|
|
if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
|
|
tmp |= RT2661_SHORT_PREAMBLE;
|
|
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp);
|
|
}
|
|
|
|
static void
|
|
rt2661_set_basicrates(struct rt2661_softc *sc,
|
|
const struct ieee80211_rateset *rs)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
uint32_t mask = 0;
|
|
uint8_t rate;
|
|
int i;
|
|
|
|
for (i = 0; i < rs->rs_nrates; i++) {
|
|
rate = rs->rs_rates[i];
|
|
|
|
if (!(rate & IEEE80211_RATE_BASIC))
|
|
continue;
|
|
|
|
mask |= 1 << ieee80211_legacy_rate_lookup(ic->ic_rt,
|
|
IEEE80211_RV(rate));
|
|
}
|
|
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR5, mask);
|
|
|
|
DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask);
|
|
}
|
|
|
|
/*
|
|
* Reprogram MAC/BBP to switch to a new band. Values taken from the reference
|
|
* driver.
|
|
*/
|
|
static void
|
|
rt2661_select_band(struct rt2661_softc *sc, struct ieee80211_channel *c)
|
|
{
|
|
uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104;
|
|
uint32_t tmp;
|
|
|
|
/* update all BBP registers that depend on the band */
|
|
bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c;
|
|
bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48;
|
|
if (IEEE80211_IS_CHAN_5GHZ(c)) {
|
|
bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c;
|
|
bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10;
|
|
}
|
|
if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
|
|
(IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
|
|
bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10;
|
|
}
|
|
|
|
rt2661_bbp_write(sc, 17, bbp17);
|
|
rt2661_bbp_write(sc, 96, bbp96);
|
|
rt2661_bbp_write(sc, 104, bbp104);
|
|
|
|
if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
|
|
(IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
|
|
rt2661_bbp_write(sc, 75, 0x80);
|
|
rt2661_bbp_write(sc, 86, 0x80);
|
|
rt2661_bbp_write(sc, 88, 0x80);
|
|
}
|
|
|
|
rt2661_bbp_write(sc, 35, bbp35);
|
|
rt2661_bbp_write(sc, 97, bbp97);
|
|
rt2661_bbp_write(sc, 98, bbp98);
|
|
|
|
tmp = RAL_READ(sc, RT2661_PHY_CSR0);
|
|
tmp &= ~(RT2661_PA_PE_2GHZ | RT2661_PA_PE_5GHZ);
|
|
if (IEEE80211_IS_CHAN_2GHZ(c))
|
|
tmp |= RT2661_PA_PE_2GHZ;
|
|
else
|
|
tmp |= RT2661_PA_PE_5GHZ;
|
|
RAL_WRITE(sc, RT2661_PHY_CSR0, tmp);
|
|
}
|
|
|
|
static void
|
|
rt2661_set_chan(struct rt2661_softc *sc, struct ieee80211_channel *c)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
const struct rfprog *rfprog;
|
|
uint8_t bbp3, bbp94 = RT2661_BBPR94_DEFAULT;
|
|
int8_t power;
|
|
u_int i, chan;
|
|
|
|
chan = ieee80211_chan2ieee(ic, c);
|
|
KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan));
|
|
|
|
/* select the appropriate RF settings based on what EEPROM says */
|
|
rfprog = (sc->rfprog == 0) ? rt2661_rf5225_1 : rt2661_rf5225_2;
|
|
|
|
/* find the settings for this channel (we know it exists) */
|
|
for (i = 0; rfprog[i].chan != chan; i++);
|
|
|
|
power = sc->txpow[i];
|
|
if (power < 0) {
|
|
bbp94 += power;
|
|
power = 0;
|
|
} else if (power > 31) {
|
|
bbp94 += power - 31;
|
|
power = 31;
|
|
}
|
|
|
|
/*
|
|
* If we are switching from the 2GHz band to the 5GHz band or
|
|
* vice-versa, BBP registers need to be reprogrammed.
|
|
*/
|
|
if (c->ic_flags != sc->sc_curchan->ic_flags) {
|
|
rt2661_select_band(sc, c);
|
|
rt2661_select_antenna(sc);
|
|
}
|
|
sc->sc_curchan = c;
|
|
|
|
rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1);
|
|
rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2);
|
|
rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7);
|
|
rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10);
|
|
|
|
DELAY(200);
|
|
|
|
rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1);
|
|
rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2);
|
|
rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7 | 1);
|
|
rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10);
|
|
|
|
DELAY(200);
|
|
|
|
rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1);
|
|
rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2);
|
|
rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7);
|
|
rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10);
|
|
|
|
/* enable smart mode for MIMO-capable RFs */
|
|
bbp3 = rt2661_bbp_read(sc, 3);
|
|
|
|
bbp3 &= ~RT2661_SMART_MODE;
|
|
if (sc->rf_rev == RT2661_RF_5325 || sc->rf_rev == RT2661_RF_2529)
|
|
bbp3 |= RT2661_SMART_MODE;
|
|
|
|
rt2661_bbp_write(sc, 3, bbp3);
|
|
|
|
if (bbp94 != RT2661_BBPR94_DEFAULT)
|
|
rt2661_bbp_write(sc, 94, bbp94);
|
|
|
|
/* 5GHz radio needs a 1ms delay here */
|
|
if (IEEE80211_IS_CHAN_5GHZ(c))
|
|
DELAY(1000);
|
|
}
|
|
|
|
static void
|
|
rt2661_set_bssid(struct rt2661_softc *sc, const uint8_t *bssid)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24;
|
|
RAL_WRITE(sc, RT2661_MAC_CSR4, tmp);
|
|
|
|
tmp = bssid[4] | bssid[5] << 8 | RT2661_ONE_BSSID << 16;
|
|
RAL_WRITE(sc, RT2661_MAC_CSR5, tmp);
|
|
}
|
|
|
|
static void
|
|
rt2661_set_macaddr(struct rt2661_softc *sc, const uint8_t *addr)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24;
|
|
RAL_WRITE(sc, RT2661_MAC_CSR2, tmp);
|
|
|
|
tmp = addr[4] | addr[5] << 8;
|
|
RAL_WRITE(sc, RT2661_MAC_CSR3, tmp);
|
|
}
|
|
|
|
static void
|
|
rt2661_update_promisc(struct ieee80211com *ic)
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
uint32_t tmp;
|
|
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR0);
|
|
|
|
tmp &= ~RT2661_DROP_NOT_TO_ME;
|
|
if (ic->ic_promisc == 0)
|
|
tmp |= RT2661_DROP_NOT_TO_ME;
|
|
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp);
|
|
|
|
DPRINTF(sc, "%s promiscuous mode\n",
|
|
(ic->ic_promisc > 0) ? "entering" : "leaving");
|
|
}
|
|
|
|
/*
|
|
* Update QoS (802.11e) settings for each h/w Tx ring.
|
|
*/
|
|
static int
|
|
rt2661_wme_update(struct ieee80211com *ic)
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
struct chanAccParams chp;
|
|
const struct wmeParams *wmep;
|
|
|
|
ieee80211_wme_ic_getparams(ic, &chp);
|
|
|
|
wmep = chp.cap_wmeParams;
|
|
|
|
/* XXX: not sure about shifts. */
|
|
/* XXX: the reference driver plays with AC_VI settings too. */
|
|
|
|
/* update TxOp */
|
|
RAL_WRITE(sc, RT2661_AC_TXOP_CSR0,
|
|
wmep[WME_AC_BE].wmep_txopLimit << 16 |
|
|
wmep[WME_AC_BK].wmep_txopLimit);
|
|
RAL_WRITE(sc, RT2661_AC_TXOP_CSR1,
|
|
wmep[WME_AC_VI].wmep_txopLimit << 16 |
|
|
wmep[WME_AC_VO].wmep_txopLimit);
|
|
|
|
/* update CWmin */
|
|
RAL_WRITE(sc, RT2661_CWMIN_CSR,
|
|
wmep[WME_AC_BE].wmep_logcwmin << 12 |
|
|
wmep[WME_AC_BK].wmep_logcwmin << 8 |
|
|
wmep[WME_AC_VI].wmep_logcwmin << 4 |
|
|
wmep[WME_AC_VO].wmep_logcwmin);
|
|
|
|
/* update CWmax */
|
|
RAL_WRITE(sc, RT2661_CWMAX_CSR,
|
|
wmep[WME_AC_BE].wmep_logcwmax << 12 |
|
|
wmep[WME_AC_BK].wmep_logcwmax << 8 |
|
|
wmep[WME_AC_VI].wmep_logcwmax << 4 |
|
|
wmep[WME_AC_VO].wmep_logcwmax);
|
|
|
|
/* update Aifsn */
|
|
RAL_WRITE(sc, RT2661_AIFSN_CSR,
|
|
wmep[WME_AC_BE].wmep_aifsn << 12 |
|
|
wmep[WME_AC_BK].wmep_aifsn << 8 |
|
|
wmep[WME_AC_VI].wmep_aifsn << 4 |
|
|
wmep[WME_AC_VO].wmep_aifsn);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
rt2661_update_slot(struct ieee80211com *ic)
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
uint8_t slottime;
|
|
uint32_t tmp;
|
|
|
|
slottime = IEEE80211_GET_SLOTTIME(ic);
|
|
|
|
tmp = RAL_READ(sc, RT2661_MAC_CSR9);
|
|
tmp = (tmp & ~0xff) | slottime;
|
|
RAL_WRITE(sc, RT2661_MAC_CSR9, tmp);
|
|
}
|
|
|
|
static const char *
|
|
rt2661_get_rf(int rev)
|
|
{
|
|
switch (rev) {
|
|
case RT2661_RF_5225: return "RT5225";
|
|
case RT2661_RF_5325: return "RT5325 (MIMO XR)";
|
|
case RT2661_RF_2527: return "RT2527";
|
|
case RT2661_RF_2529: return "RT2529 (MIMO XR)";
|
|
default: return "unknown";
|
|
}
|
|
}
|
|
|
|
static void
|
|
rt2661_read_eeprom(struct rt2661_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN])
|
|
{
|
|
uint16_t val;
|
|
int i;
|
|
|
|
/* read MAC address */
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01);
|
|
macaddr[0] = val & 0xff;
|
|
macaddr[1] = val >> 8;
|
|
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23);
|
|
macaddr[2] = val & 0xff;
|
|
macaddr[3] = val >> 8;
|
|
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45);
|
|
macaddr[4] = val & 0xff;
|
|
macaddr[5] = val >> 8;
|
|
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA);
|
|
/* XXX: test if different from 0xffff? */
|
|
sc->rf_rev = (val >> 11) & 0x1f;
|
|
sc->hw_radio = (val >> 10) & 0x1;
|
|
sc->rx_ant = (val >> 4) & 0x3;
|
|
sc->tx_ant = (val >> 2) & 0x3;
|
|
sc->nb_ant = val & 0x3;
|
|
|
|
DPRINTF(sc, "RF revision=%d\n", sc->rf_rev);
|
|
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_CONFIG2);
|
|
sc->ext_5ghz_lna = (val >> 6) & 0x1;
|
|
sc->ext_2ghz_lna = (val >> 4) & 0x1;
|
|
|
|
DPRINTF(sc, "External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n",
|
|
sc->ext_2ghz_lna, sc->ext_5ghz_lna);
|
|
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_2GHZ_OFFSET);
|
|
if ((val & 0xff) != 0xff)
|
|
sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */
|
|
|
|
/* Only [-10, 10] is valid */
|
|
if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10)
|
|
sc->rssi_2ghz_corr = 0;
|
|
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_5GHZ_OFFSET);
|
|
if ((val & 0xff) != 0xff)
|
|
sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */
|
|
|
|
/* Only [-10, 10] is valid */
|
|
if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10)
|
|
sc->rssi_5ghz_corr = 0;
|
|
|
|
/* adjust RSSI correction for external low-noise amplifier */
|
|
if (sc->ext_2ghz_lna)
|
|
sc->rssi_2ghz_corr -= 14;
|
|
if (sc->ext_5ghz_lna)
|
|
sc->rssi_5ghz_corr -= 14;
|
|
|
|
DPRINTF(sc, "RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n",
|
|
sc->rssi_2ghz_corr, sc->rssi_5ghz_corr);
|
|
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_FREQ_OFFSET);
|
|
if ((val >> 8) != 0xff)
|
|
sc->rfprog = (val >> 8) & 0x3;
|
|
if ((val & 0xff) != 0xff)
|
|
sc->rffreq = val & 0xff;
|
|
|
|
DPRINTF(sc, "RF prog=%d\nRF freq=%d\n", sc->rfprog, sc->rffreq);
|
|
|
|
/* read Tx power for all a/b/g channels */
|
|
for (i = 0; i < 19; i++) {
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_TXPOWER + i);
|
|
sc->txpow[i * 2] = (int8_t)(val >> 8); /* signed */
|
|
DPRINTF(sc, "Channel=%d Tx power=%d\n",
|
|
rt2661_rf5225_1[i * 2].chan, sc->txpow[i * 2]);
|
|
sc->txpow[i * 2 + 1] = (int8_t)(val & 0xff); /* signed */
|
|
DPRINTF(sc, "Channel=%d Tx power=%d\n",
|
|
rt2661_rf5225_1[i * 2 + 1].chan, sc->txpow[i * 2 + 1]);
|
|
}
|
|
|
|
/* read vendor-specific BBP values */
|
|
for (i = 0; i < 16; i++) {
|
|
val = rt2661_eeprom_read(sc, RT2661_EEPROM_BBP_BASE + i);
|
|
if (val == 0 || val == 0xffff)
|
|
continue; /* skip invalid entries */
|
|
sc->bbp_prom[i].reg = val >> 8;
|
|
sc->bbp_prom[i].val = val & 0xff;
|
|
DPRINTF(sc, "BBP R%d=%02x\n", sc->bbp_prom[i].reg,
|
|
sc->bbp_prom[i].val);
|
|
}
|
|
}
|
|
|
|
static int
|
|
rt2661_bbp_init(struct rt2661_softc *sc)
|
|
{
|
|
int i, ntries;
|
|
uint8_t val;
|
|
|
|
/* wait for BBP to be ready */
|
|
for (ntries = 0; ntries < 100; ntries++) {
|
|
val = rt2661_bbp_read(sc, 0);
|
|
if (val != 0 && val != 0xff)
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
if (ntries == 100) {
|
|
device_printf(sc->sc_dev, "timeout waiting for BBP\n");
|
|
return EIO;
|
|
}
|
|
|
|
/* initialize BBP registers to default values */
|
|
for (i = 0; i < nitems(rt2661_def_bbp); i++) {
|
|
rt2661_bbp_write(sc, rt2661_def_bbp[i].reg,
|
|
rt2661_def_bbp[i].val);
|
|
}
|
|
|
|
/* write vendor-specific BBP values (from EEPROM) */
|
|
for (i = 0; i < 16; i++) {
|
|
if (sc->bbp_prom[i].reg == 0)
|
|
continue;
|
|
rt2661_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
rt2661_init_locked(struct rt2661_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
uint32_t tmp, sta[3];
|
|
int i, error, ntries;
|
|
|
|
RAL_LOCK_ASSERT(sc);
|
|
|
|
if ((sc->sc_flags & RAL_FW_LOADED) == 0) {
|
|
error = rt2661_load_microcode(sc);
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev,
|
|
"%s: could not load 8051 microcode, error %d\n",
|
|
__func__, error);
|
|
return;
|
|
}
|
|
sc->sc_flags |= RAL_FW_LOADED;
|
|
}
|
|
|
|
rt2661_stop_locked(sc);
|
|
|
|
/* initialize Tx rings */
|
|
RAL_WRITE(sc, RT2661_AC1_BASE_CSR, sc->txq[1].physaddr);
|
|
RAL_WRITE(sc, RT2661_AC0_BASE_CSR, sc->txq[0].physaddr);
|
|
RAL_WRITE(sc, RT2661_AC2_BASE_CSR, sc->txq[2].physaddr);
|
|
RAL_WRITE(sc, RT2661_AC3_BASE_CSR, sc->txq[3].physaddr);
|
|
|
|
/* initialize Mgt ring */
|
|
RAL_WRITE(sc, RT2661_MGT_BASE_CSR, sc->mgtq.physaddr);
|
|
|
|
/* initialize Rx ring */
|
|
RAL_WRITE(sc, RT2661_RX_BASE_CSR, sc->rxq.physaddr);
|
|
|
|
/* initialize Tx rings sizes */
|
|
RAL_WRITE(sc, RT2661_TX_RING_CSR0,
|
|
RT2661_TX_RING_COUNT << 24 |
|
|
RT2661_TX_RING_COUNT << 16 |
|
|
RT2661_TX_RING_COUNT << 8 |
|
|
RT2661_TX_RING_COUNT);
|
|
|
|
RAL_WRITE(sc, RT2661_TX_RING_CSR1,
|
|
RT2661_TX_DESC_WSIZE << 16 |
|
|
RT2661_TX_RING_COUNT << 8 | /* XXX: HCCA ring unused */
|
|
RT2661_MGT_RING_COUNT);
|
|
|
|
/* initialize Rx rings */
|
|
RAL_WRITE(sc, RT2661_RX_RING_CSR,
|
|
RT2661_RX_DESC_BACK << 16 |
|
|
RT2661_RX_DESC_WSIZE << 8 |
|
|
RT2661_RX_RING_COUNT);
|
|
|
|
/* XXX: some magic here */
|
|
RAL_WRITE(sc, RT2661_TX_DMA_DST_CSR, 0xaa);
|
|
|
|
/* load base addresses of all 5 Tx rings (4 data + 1 mgt) */
|
|
RAL_WRITE(sc, RT2661_LOAD_TX_RING_CSR, 0x1f);
|
|
|
|
/* load base address of Rx ring */
|
|
RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 2);
|
|
|
|
/* initialize MAC registers to default values */
|
|
for (i = 0; i < nitems(rt2661_def_mac); i++)
|
|
RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val);
|
|
|
|
rt2661_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr);
|
|
|
|
/* set host ready */
|
|
RAL_WRITE(sc, RT2661_MAC_CSR1, 3);
|
|
RAL_WRITE(sc, RT2661_MAC_CSR1, 0);
|
|
|
|
/* wait for BBP/RF to wakeup */
|
|
for (ntries = 0; ntries < 1000; ntries++) {
|
|
if (RAL_READ(sc, RT2661_MAC_CSR12) & 8)
|
|
break;
|
|
DELAY(1000);
|
|
}
|
|
if (ntries == 1000) {
|
|
printf("timeout waiting for BBP/RF to wakeup\n");
|
|
rt2661_stop_locked(sc);
|
|
return;
|
|
}
|
|
|
|
if (rt2661_bbp_init(sc) != 0) {
|
|
rt2661_stop_locked(sc);
|
|
return;
|
|
}
|
|
|
|
/* select default channel */
|
|
sc->sc_curchan = ic->ic_curchan;
|
|
rt2661_select_band(sc, sc->sc_curchan);
|
|
rt2661_select_antenna(sc);
|
|
rt2661_set_chan(sc, sc->sc_curchan);
|
|
|
|
/* update Rx filter */
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR0) & 0xffff;
|
|
|
|
tmp |= RT2661_DROP_PHY_ERROR | RT2661_DROP_CRC_ERROR;
|
|
if (ic->ic_opmode != IEEE80211_M_MONITOR) {
|
|
tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR |
|
|
RT2661_DROP_ACKCTS;
|
|
if (ic->ic_opmode != IEEE80211_M_HOSTAP &&
|
|
ic->ic_opmode != IEEE80211_M_MBSS)
|
|
tmp |= RT2661_DROP_TODS;
|
|
if (ic->ic_promisc == 0)
|
|
tmp |= RT2661_DROP_NOT_TO_ME;
|
|
}
|
|
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp);
|
|
|
|
/* clear STA registers */
|
|
RAL_READ_REGION_4(sc, RT2661_STA_CSR0, sta, nitems(sta));
|
|
|
|
/* initialize ASIC */
|
|
RAL_WRITE(sc, RT2661_MAC_CSR1, 4);
|
|
|
|
/* clear any pending interrupt */
|
|
RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff);
|
|
|
|
/* enable interrupts */
|
|
RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10);
|
|
RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0);
|
|
|
|
/* kick Rx */
|
|
RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 1);
|
|
|
|
sc->sc_flags |= RAL_RUNNING;
|
|
|
|
callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc);
|
|
}
|
|
|
|
static void
|
|
rt2661_init(void *priv)
|
|
{
|
|
struct rt2661_softc *sc = priv;
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
|
|
RAL_LOCK(sc);
|
|
rt2661_init_locked(sc);
|
|
RAL_UNLOCK(sc);
|
|
|
|
if (sc->sc_flags & RAL_RUNNING)
|
|
ieee80211_start_all(ic); /* start all vap's */
|
|
}
|
|
|
|
void
|
|
rt2661_stop_locked(struct rt2661_softc *sc)
|
|
{
|
|
volatile int *flags = &sc->sc_flags;
|
|
uint32_t tmp;
|
|
|
|
while (*flags & RAL_INPUT_RUNNING)
|
|
msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10);
|
|
|
|
callout_stop(&sc->watchdog_ch);
|
|
sc->sc_tx_timer = 0;
|
|
|
|
if (sc->sc_flags & RAL_RUNNING) {
|
|
sc->sc_flags &= ~RAL_RUNNING;
|
|
|
|
/* abort Tx (for all 5 Tx rings) */
|
|
RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 0x1f << 16);
|
|
|
|
/* disable Rx (value remains after reset!) */
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR0);
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX);
|
|
|
|
/* reset ASIC */
|
|
RAL_WRITE(sc, RT2661_MAC_CSR1, 3);
|
|
RAL_WRITE(sc, RT2661_MAC_CSR1, 0);
|
|
|
|
/* disable interrupts */
|
|
RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffffff);
|
|
RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff);
|
|
|
|
/* clear any pending interrupt */
|
|
RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff);
|
|
RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, 0xffffffff);
|
|
|
|
/* reset Tx and Rx rings */
|
|
rt2661_reset_tx_ring(sc, &sc->txq[0]);
|
|
rt2661_reset_tx_ring(sc, &sc->txq[1]);
|
|
rt2661_reset_tx_ring(sc, &sc->txq[2]);
|
|
rt2661_reset_tx_ring(sc, &sc->txq[3]);
|
|
rt2661_reset_tx_ring(sc, &sc->mgtq);
|
|
rt2661_reset_rx_ring(sc, &sc->rxq);
|
|
}
|
|
}
|
|
|
|
void
|
|
rt2661_stop(void *priv)
|
|
{
|
|
struct rt2661_softc *sc = priv;
|
|
|
|
RAL_LOCK(sc);
|
|
rt2661_stop_locked(sc);
|
|
RAL_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
rt2661_load_microcode(struct rt2661_softc *sc)
|
|
{
|
|
const struct firmware *fp;
|
|
const char *imagename;
|
|
int ntries, error;
|
|
|
|
RAL_LOCK_ASSERT(sc);
|
|
|
|
switch (sc->sc_id) {
|
|
case 0x0301: imagename = "rt2561sfw"; break;
|
|
case 0x0302: imagename = "rt2561fw"; break;
|
|
case 0x0401: imagename = "rt2661fw"; break;
|
|
default:
|
|
device_printf(sc->sc_dev, "%s: unexpected pci device id 0x%x, "
|
|
"don't know how to retrieve firmware\n",
|
|
__func__, sc->sc_id);
|
|
return EINVAL;
|
|
}
|
|
RAL_UNLOCK(sc);
|
|
fp = firmware_get(imagename);
|
|
RAL_LOCK(sc);
|
|
if (fp == NULL) {
|
|
device_printf(sc->sc_dev,
|
|
"%s: unable to retrieve firmware image %s\n",
|
|
__func__, imagename);
|
|
return EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Load 8051 microcode into NIC.
|
|
*/
|
|
/* reset 8051 */
|
|
RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET);
|
|
|
|
/* cancel any pending Host to MCU command */
|
|
RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 0);
|
|
RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff);
|
|
RAL_WRITE(sc, RT2661_HOST_CMD_CSR, 0);
|
|
|
|
/* write 8051's microcode */
|
|
RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET | RT2661_MCU_SEL);
|
|
RAL_WRITE_REGION_1(sc, RT2661_MCU_CODE_BASE, fp->data, fp->datasize);
|
|
RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET);
|
|
|
|
/* kick 8051's ass */
|
|
RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, 0);
|
|
|
|
/* wait for 8051 to initialize */
|
|
for (ntries = 0; ntries < 500; ntries++) {
|
|
if (RAL_READ(sc, RT2661_MCU_CNTL_CSR) & RT2661_MCU_READY)
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
if (ntries == 500) {
|
|
device_printf(sc->sc_dev,
|
|
"%s: timeout waiting for MCU to initialize\n", __func__);
|
|
error = EIO;
|
|
} else
|
|
error = 0;
|
|
|
|
firmware_put(fp, FIRMWARE_UNLOAD);
|
|
return error;
|
|
}
|
|
|
|
#ifdef notyet
|
|
/*
|
|
* Dynamically tune Rx sensitivity (BBP register 17) based on average RSSI and
|
|
* false CCA count. This function is called periodically (every seconds) when
|
|
* in the RUN state. Values taken from the reference driver.
|
|
*/
|
|
static void
|
|
rt2661_rx_tune(struct rt2661_softc *sc)
|
|
{
|
|
uint8_t bbp17;
|
|
uint16_t cca;
|
|
int lo, hi, dbm;
|
|
|
|
/*
|
|
* Tuning range depends on operating band and on the presence of an
|
|
* external low-noise amplifier.
|
|
*/
|
|
lo = 0x20;
|
|
if (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan))
|
|
lo += 0x08;
|
|
if ((IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan) && sc->ext_2ghz_lna) ||
|
|
(IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan) && sc->ext_5ghz_lna))
|
|
lo += 0x10;
|
|
hi = lo + 0x20;
|
|
|
|
/* retrieve false CCA count since last call (clear on read) */
|
|
cca = RAL_READ(sc, RT2661_STA_CSR1) & 0xffff;
|
|
|
|
if (dbm >= -35) {
|
|
bbp17 = 0x60;
|
|
} else if (dbm >= -58) {
|
|
bbp17 = hi;
|
|
} else if (dbm >= -66) {
|
|
bbp17 = lo + 0x10;
|
|
} else if (dbm >= -74) {
|
|
bbp17 = lo + 0x08;
|
|
} else {
|
|
/* RSSI < -74dBm, tune using false CCA count */
|
|
|
|
bbp17 = sc->bbp17; /* current value */
|
|
|
|
hi -= 2 * (-74 - dbm);
|
|
if (hi < lo)
|
|
hi = lo;
|
|
|
|
if (bbp17 > hi) {
|
|
bbp17 = hi;
|
|
|
|
} else if (cca > 512) {
|
|
if (++bbp17 > hi)
|
|
bbp17 = hi;
|
|
} else if (cca < 100) {
|
|
if (--bbp17 < lo)
|
|
bbp17 = lo;
|
|
}
|
|
}
|
|
|
|
if (bbp17 != sc->bbp17) {
|
|
rt2661_bbp_write(sc, 17, bbp17);
|
|
sc->bbp17 = bbp17;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Enter/Leave radar detection mode.
|
|
* This is for 802.11h additional regulatory domains.
|
|
*/
|
|
static void
|
|
rt2661_radar_start(struct rt2661_softc *sc)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
/* disable Rx */
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR0);
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX);
|
|
|
|
rt2661_bbp_write(sc, 82, 0x20);
|
|
rt2661_bbp_write(sc, 83, 0x00);
|
|
rt2661_bbp_write(sc, 84, 0x40);
|
|
|
|
/* save current BBP registers values */
|
|
sc->bbp18 = rt2661_bbp_read(sc, 18);
|
|
sc->bbp21 = rt2661_bbp_read(sc, 21);
|
|
sc->bbp22 = rt2661_bbp_read(sc, 22);
|
|
sc->bbp16 = rt2661_bbp_read(sc, 16);
|
|
sc->bbp17 = rt2661_bbp_read(sc, 17);
|
|
sc->bbp64 = rt2661_bbp_read(sc, 64);
|
|
|
|
rt2661_bbp_write(sc, 18, 0xff);
|
|
rt2661_bbp_write(sc, 21, 0x3f);
|
|
rt2661_bbp_write(sc, 22, 0x3f);
|
|
rt2661_bbp_write(sc, 16, 0xbd);
|
|
rt2661_bbp_write(sc, 17, sc->ext_5ghz_lna ? 0x44 : 0x34);
|
|
rt2661_bbp_write(sc, 64, 0x21);
|
|
|
|
/* restore Rx filter */
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp);
|
|
}
|
|
|
|
static int
|
|
rt2661_radar_stop(struct rt2661_softc *sc)
|
|
{
|
|
uint8_t bbp66;
|
|
|
|
/* read radar detection result */
|
|
bbp66 = rt2661_bbp_read(sc, 66);
|
|
|
|
/* restore BBP registers values */
|
|
rt2661_bbp_write(sc, 16, sc->bbp16);
|
|
rt2661_bbp_write(sc, 17, sc->bbp17);
|
|
rt2661_bbp_write(sc, 18, sc->bbp18);
|
|
rt2661_bbp_write(sc, 21, sc->bbp21);
|
|
rt2661_bbp_write(sc, 22, sc->bbp22);
|
|
rt2661_bbp_write(sc, 64, sc->bbp64);
|
|
|
|
return bbp66 == 1;
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
rt2661_prepare_beacon(struct rt2661_softc *sc, struct ieee80211vap *vap)
|
|
{
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
struct rt2661_tx_desc desc;
|
|
struct mbuf *m0;
|
|
int rate;
|
|
|
|
if ((m0 = ieee80211_beacon_alloc(vap->iv_bss))== NULL) {
|
|
device_printf(sc->sc_dev, "could not allocate beacon frame\n");
|
|
return ENOBUFS;
|
|
}
|
|
|
|
/* send beacons at the lowest available rate */
|
|
rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ? 12 : 2;
|
|
|
|
rt2661_setup_tx_desc(sc, &desc, RT2661_TX_TIMESTAMP, RT2661_TX_HWSEQ,
|
|
m0->m_pkthdr.len, rate, NULL, 0, RT2661_QID_MGT);
|
|
|
|
/* copy the first 24 bytes of Tx descriptor into NIC memory */
|
|
RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0, (uint8_t *)&desc, 24);
|
|
|
|
/* copy beacon header and payload into NIC memory */
|
|
RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0 + 24,
|
|
mtod(m0, uint8_t *), m0->m_pkthdr.len);
|
|
|
|
m_freem(m0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Enable TSF synchronization and tell h/w to start sending beacons for IBSS
|
|
* and HostAP operating modes.
|
|
*/
|
|
static void
|
|
rt2661_enable_tsf_sync(struct rt2661_softc *sc)
|
|
{
|
|
struct ieee80211com *ic = &sc->sc_ic;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
uint32_t tmp;
|
|
|
|
if (vap->iv_opmode != IEEE80211_M_STA) {
|
|
/*
|
|
* Change default 16ms TBTT adjustment to 8ms.
|
|
* Must be done before enabling beacon generation.
|
|
*/
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR10, 1 << 12 | 8);
|
|
}
|
|
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000;
|
|
|
|
/* set beacon interval (in 1/16ms unit) */
|
|
tmp |= vap->iv_bss->ni_intval * 16;
|
|
|
|
tmp |= RT2661_TSF_TICKING | RT2661_ENABLE_TBTT;
|
|
if (vap->iv_opmode == IEEE80211_M_STA)
|
|
tmp |= RT2661_TSF_MODE(1);
|
|
else
|
|
tmp |= RT2661_TSF_MODE(2) | RT2661_GENERATE_BEACON;
|
|
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp);
|
|
}
|
|
|
|
static void
|
|
rt2661_enable_tsf(struct rt2661_softc *sc)
|
|
{
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR9,
|
|
(RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000)
|
|
| RT2661_TSF_TICKING | RT2661_TSF_MODE(2));
|
|
}
|
|
|
|
/*
|
|
* Retrieve the "Received Signal Strength Indicator" from the raw values
|
|
* contained in Rx descriptors. The computation depends on which band the
|
|
* frame was received. Correction values taken from the reference driver.
|
|
*/
|
|
static int
|
|
rt2661_get_rssi(struct rt2661_softc *sc, uint8_t raw)
|
|
{
|
|
int lna, agc, rssi;
|
|
|
|
lna = (raw >> 5) & 0x3;
|
|
agc = raw & 0x1f;
|
|
|
|
if (lna == 0) {
|
|
/*
|
|
* No mapping available.
|
|
*
|
|
* NB: Since RSSI is relative to noise floor, -1 is
|
|
* adequate for caller to know error happened.
|
|
*/
|
|
return -1;
|
|
}
|
|
|
|
rssi = (2 * agc) - RT2661_NOISE_FLOOR;
|
|
|
|
if (IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan)) {
|
|
rssi += sc->rssi_2ghz_corr;
|
|
|
|
if (lna == 1)
|
|
rssi -= 64;
|
|
else if (lna == 2)
|
|
rssi -= 74;
|
|
else if (lna == 3)
|
|
rssi -= 90;
|
|
} else {
|
|
rssi += sc->rssi_5ghz_corr;
|
|
|
|
if (lna == 1)
|
|
rssi -= 64;
|
|
else if (lna == 2)
|
|
rssi -= 86;
|
|
else if (lna == 3)
|
|
rssi -= 100;
|
|
}
|
|
return rssi;
|
|
}
|
|
|
|
static void
|
|
rt2661_scan_start(struct ieee80211com *ic)
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
uint32_t tmp;
|
|
|
|
/* abort TSF synchronization */
|
|
tmp = RAL_READ(sc, RT2661_TXRX_CSR9);
|
|
RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0xffffff);
|
|
rt2661_set_bssid(sc, ieee80211broadcastaddr);
|
|
}
|
|
|
|
static void
|
|
rt2661_scan_end(struct ieee80211com *ic)
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
|
|
rt2661_enable_tsf_sync(sc);
|
|
/* XXX keep local copy */
|
|
rt2661_set_bssid(sc, vap->iv_bss->ni_bssid);
|
|
}
|
|
|
|
static void
|
|
rt2661_getradiocaps(struct ieee80211com *ic,
|
|
int maxchans, int *nchans, struct ieee80211_channel chans[])
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
uint8_t bands[IEEE80211_MODE_BYTES];
|
|
|
|
memset(bands, 0, sizeof(bands));
|
|
setbit(bands, IEEE80211_MODE_11B);
|
|
setbit(bands, IEEE80211_MODE_11G);
|
|
ieee80211_add_channels_default_2ghz(chans, maxchans, nchans, bands, 0);
|
|
|
|
if (sc->rf_rev == RT2661_RF_5225 || sc->rf_rev == RT2661_RF_5325) {
|
|
setbit(bands, IEEE80211_MODE_11A);
|
|
ieee80211_add_channel_list_5ghz(chans, maxchans, nchans,
|
|
rt2661_chan_5ghz, nitems(rt2661_chan_5ghz), bands, 0);
|
|
}
|
|
}
|
|
|
|
static void
|
|
rt2661_set_channel(struct ieee80211com *ic)
|
|
{
|
|
struct rt2661_softc *sc = ic->ic_softc;
|
|
|
|
RAL_LOCK(sc);
|
|
rt2661_set_chan(sc, ic->ic_curchan);
|
|
RAL_UNLOCK(sc);
|
|
|
|
}
|