freebsd-dev/sys/i4b/layer1/isic/i4b_itk_ix1.c
Hellmuth Michaelis b5dd89c336 remove redundant definitions of card types:
- remove all occurances of FLAG_XXX values and replace with CARD_TYPEP_XXX
 - remove sc_flag from isic softc and replace it with sc_cardtyp
remove some left over redundant definitions from isic and i4b_l1.h
remove left over cvs id from i4b cvs repository
2001-01-24 08:41:52 +00:00

398 lines
11 KiB
C

/*
* Copyright (c) 1998, 1999 Martin Husemann <martin@rumolt.teuto.de>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software withough specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*---------------------------------------------------------------------------
*
* i4b_itk_ix1.c - ITK ix1 micro passive card driver for isdn4bsd
* --------------------------------------------------------------
*
* last edit-date: [Wed Jan 24 09:27:06 2001]
*
* $FreeBSD$
*
*---------------------------------------------------------------------------
*
* The ITK ix1 micro ISDN card is an ISA card with one region
* of four io ports mapped and a fixed irq all jumpered on the card.
* Access to the board is straight forward and simmilar to
* the ELSA and DYNALINK cards. If a PCI version of this card
* exists all we need is probably a pci-bus attachment, all
* this low level routines should work imediately.
*
* To reset the card:
* - write 0x01 to ITK_CONFIG
* - wait >= 10 ms
* - write 0x00 to ITK_CONFIG
*
* To read or write data:
* - write address to ITK_ALE port
* - read data from or write data to ITK_ISAC_DATA port or ITK_HSCX_DATA port
* The two HSCX channel registers are offset by HSCXA (0x00) and HSCXB (0x40).
*
* The probe routine was derived by trial and error from a representative
* sample of two cards ;-) The standard way (checking HSCX versions)
* was extended by reading a zero from a non existant HSCX register (register
* 0xff). Reading the config register gives varying results, so this doesn't
* seem to be used as an id register (like the Teles S0/16.3).
*
* If the probe fails for your card use "options ITK_PROBE_DEBUG" to get
* additional debug output.
*
*---------------------------------------------------------------------------*/
#include "isic.h"
#include "opt_i4b.h"
#if NISIC > 0 && defined(ITKIX1)
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <net/if.h>
#include <machine/i4b_ioctl.h>
#include <machine/i4b_trace.h>
#include <i4b/layer1/i4b_l1.h>
#include <i4b/layer1/isic/i4b_isic.h>
#include <i4b/layer1/isic/i4b_hscx.h>
/* Register offsets */
#define ITK_ISAC_DATA 0
#define ITK_HSCX_DATA 1
#define ITK_ALE 2
#define ITK_CONFIG 3
/* Size of IO range to allocate for this card */
#define ITK_IO_SIZE 4
/* Register offsets for the two HSCX channels */
#define HSCXA 0
#define HSCXB 0x40
static void
itkix1_read_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[0]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[0]);
switch (what)
{
case ISIC_WHAT_ISAC:
bus_space_write_1(t, h, ITK_ALE, 0);
bus_space_read_multi_1(t, h, ITK_ISAC_DATA, buf, size);
break;
case ISIC_WHAT_HSCXA:
bus_space_write_1(t, h, ITK_ALE, HSCXA);
bus_space_read_multi_1(t, h, ITK_HSCX_DATA, buf, size);
break;
case ISIC_WHAT_HSCXB:
bus_space_write_1(t, h, ITK_ALE, HSCXB);
bus_space_read_multi_1(t, h, ITK_HSCX_DATA, buf, size);
break;
}
}
static void
itkix1_write_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[0]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[0]);
switch (what)
{
case ISIC_WHAT_ISAC:
bus_space_write_1(t, h, ITK_ALE, 0);
bus_space_write_multi_1(t, h, ITK_ISAC_DATA, (u_int8_t*)buf, size);
break;
case ISIC_WHAT_HSCXA:
bus_space_write_1(t, h, ITK_ALE, HSCXA);
bus_space_write_multi_1(t, h, ITK_HSCX_DATA, (u_int8_t*)buf, size);
break;
case ISIC_WHAT_HSCXB:
bus_space_write_1(t, h, ITK_ALE, HSCXB);
bus_space_write_multi_1(t, h, ITK_HSCX_DATA, (u_int8_t*)buf, size);
break;
}
}
static void
itkix1_write_reg(struct l1_softc *sc, int what, bus_size_t offs, u_int8_t data)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[0]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[0]);
switch (what)
{
case ISIC_WHAT_ISAC:
bus_space_write_1(t, h, ITK_ALE, offs);
bus_space_write_1(t, h, ITK_ISAC_DATA, data);
break;
case ISIC_WHAT_HSCXA:
bus_space_write_1(t, h, ITK_ALE, HSCXA+offs);
bus_space_write_1(t, h, ITK_HSCX_DATA, data);
break;
case ISIC_WHAT_HSCXB:
bus_space_write_1(t, h, ITK_ALE, HSCXB+offs);
bus_space_write_1(t, h, ITK_HSCX_DATA, data);
break;
}
}
static u_int8_t
itkix1_read_reg(struct l1_softc *sc, int what, bus_size_t offs)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[0]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[0]);
switch (what)
{
case ISIC_WHAT_ISAC:
bus_space_write_1(t, h, ITK_ALE, offs);
return bus_space_read_1(t, h, ITK_ISAC_DATA);
case ISIC_WHAT_HSCXA:
bus_space_write_1(t, h, ITK_ALE, HSCXA+offs);
return bus_space_read_1(t, h, ITK_HSCX_DATA);
case ISIC_WHAT_HSCXB:
bus_space_write_1(t, h, ITK_ALE, HSCXB+offs);
return bus_space_read_1(t, h, ITK_HSCX_DATA);
}
return 0;
}
/*
* Probe for card
*/
int
isic_probe_itkix1(device_t dev)
{
size_t unit = device_get_unit(dev); /* get unit */
struct l1_softc *sc = 0; /* softc */
void *ih = 0; /* dummy */
bus_space_tag_t t; /* bus things */
bus_space_handle_t h;
u_int8_t hd, hv1, hv2, saveale;
int ret;
#if defined(ITK_PROBE_DEBUG)
printf("Checking unit %u\n", unit);
#endif
/* check max unit range */
if(unit >= ISIC_MAXUNIT)
{
printf("isic%d: Error, unit %d >= ISIC_MAXUNIT for ITK IX1!\n",
unit, unit);
return ENXIO;
}
sc = &l1_sc[unit]; /* get pointer to softc */
sc->sc_unit = unit; /* set unit */
#if defined(ITK_PROBE_DEBUG)
printf("Allocating io base...");
#endif
if(!(sc->sc_resources.io_base[0] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[0],
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not allocate i/o port for ITK IX1.\n", unit);
return ENXIO;
}
#if defined(ITK_PROBE_DEBUG)
printf("done.\n");
#endif
sc->sc_port = rman_get_start(sc->sc_resources.io_base[0]);
t = rman_get_bustag(sc->sc_resources.io_base[0]);
h = rman_get_bushandle(sc->sc_resources.io_base[0]);
#if defined(ITK_PROBE_DEBUG)
printf("Allocating irq...");
#endif
/* get our irq */
if(!(sc->sc_resources.irq =
bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->sc_resources.irq_rid,
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not allocate irq for ITK IX1.\n", unit);
bus_release_resource(dev,SYS_RES_IOPORT,
sc->sc_resources.io_rid[0],
sc->sc_resources.io_base[0]);
return ENXIO;
}
#if defined(ITK_PROBE_DEBUG)
printf("done.\n");
#endif
/* get the irq number */
sc->sc_irq = rman_get_start(sc->sc_resources.irq);
#if defined(ITK_PROBE_DEBUG)
printf("Setting up access routines...");
#endif
/* setup access routines */
sc->clearirq = NULL;
sc->readreg = itkix1_read_reg;
sc->writereg = itkix1_write_reg;
sc->readfifo = itkix1_read_fifo;
sc->writefifo = itkix1_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_ITKIX1;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
#if defined(ITK_PROBE_DEBUG)
printf("done.\n");
#endif
/* register interupt routine */
#if defined(ITK_PROBE_DEBUG)
printf("Setting up access interupt...");
#endif
bus_setup_intr(dev, sc->sc_resources.irq,
INTR_TYPE_NET,
(void(*)(void *))(isicintr),
sc, &ih);
#if defined(ITK_PROBE_DEBUG)
printf("done.\n");
printf("Doing probe stuff...");
#endif
/* save old value of this port, we're stomping over it */
saveale = bus_space_read_1(t, h, ITK_ALE);
/* select invalid register */
bus_space_write_1(t, h, ITK_ALE, 0xff);
/* get HSCX data for this non existent register */
hd = bus_space_read_1(t, h, ITK_HSCX_DATA);
/* get HSCX version info */
bus_space_write_1(t, h, ITK_ALE, HSCXA + H_VSTR);
hv1 = bus_space_read_1(t, h, ITK_HSCX_DATA);
bus_space_write_1(t, h, ITK_ALE, HSCXB + H_VSTR);
hv2 = bus_space_read_1(t, h, ITK_HSCX_DATA);
ret = (hd == 0) && ((hv1 & 0x0f) == 0x05) && ((hv2 & 0x0f) == 0x05);
/* succeed if version bits are OK and we got a zero from the
* non existent register. we found verison 0x05 and 0x04
* out there... */
ret = (hd == 0)
&& (((hv1 & 0x0f) == 0x05) || ((hv1 & 0x0f) == 0x04))
&& (((hv2 & 0x0f) == 0x05) || ((hv2 & 0x0f) == 0x04));
/* retstore save value if we fail (if we succeed the old value
* has no meaning) */
if (!ret)
bus_space_write_1(t, h, ITK_ALE, saveale);
#if defined(ITK_PROBE_DEBUG)
printf("done.\n");
printf("Doing second probe stuff...");
#endif
hv1 = HSCX_READ(0, H_VSTR) & 0xf;
hv2 = HSCX_READ(1, H_VSTR) & 0xf;
/* Read HSCX A/B VSTR. Expected value is 0x05 (V2.1) or 0x04 (V2.0). */
if((hv1 != 0x05 && hv1 != 0x04) || (hv2 != 0x05 && hv2 != 0x04))
{
printf("isic%d: HSCX VSTR test failed for ITK ix1 micro\n",
unit);
printf("isic%d: HSC0: VSTR: %#x\n",
unit, HSCX_READ(0, H_VSTR));
printf("isic%d: HSC1: VSTR: %#x\n",
unit, HSCX_READ(1, H_VSTR));
isic_detach_common(dev);
return ENXIO;
}
#if defined(ITK_PROBE_DEBUG)
printf("done.\n");
#endif
#if defined(ITK_PROBE_DEBUG)
printf("\nITK ix1 micro probe: hscx = 0x%02x, v1 = 0x%02x, v2 = 0x%02x, would have %s\n",
hd, hv1, hv2, ret ? "succeeded" : "failed");
isic_detach_common(dev);
return ENXIO;
#else
if ( ret )
{
return 0;
}
else
{
isic_detach_common(dev);
return ENXIO;
}
#endif
}
/*
* Attach card
*/
int
isic_attach_itkix1(device_t dev)
{
size_t unit = device_get_unit(dev); /* get unit */
struct l1_softc *sc = &l1_sc[unit];
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[0]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[0]);
/* setup access routines */
sc->clearirq = NULL;
sc->readreg = itkix1_read_reg;
sc->writereg = itkix1_write_reg;
sc->readfifo = itkix1_read_fifo;
sc->writefifo = itkix1_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_ITKIX1;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
bus_space_write_1(t, h, ITK_CONFIG, 1);
DELAY(SEC_DELAY / 10);
bus_space_write_1(t, h, ITK_CONFIG, 0);
DELAY(SEC_DELAY / 10);
return 0;
}
#endif /* ITKIX1 */