freebsd-dev/sys/crypto/ccp/ccp.h
John Baldwin c034143269 Refactor driver and consumer interfaces for OCF (in-kernel crypto).
- The linked list of cryptoini structures used in session
  initialization is replaced with a new flat structure: struct
  crypto_session_params.  This session includes a new mode to define
  how the other fields should be interpreted.  Available modes
  include:

  - COMPRESS (for compression/decompression)
  - CIPHER (for simply encryption/decryption)
  - DIGEST (computing and verifying digests)
  - AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
  - ETA (combined auth and encryption using encrypt-then-authenticate)

  Additional modes could be added in the future (e.g. if we wanted to
  support TLS MtE for AES-CBC in the kernel we could add a new mode
  for that.  TLS modes might also affect how AAD is interpreted, etc.)

  The flat structure also includes the key lengths and algorithms as
  before.  However, code doesn't have to walk the linked list and
  switch on the algorithm to determine which key is the auth key vs
  encryption key.  The 'csp_auth_*' fields are always used for auth
  keys and settings and 'csp_cipher_*' for cipher.  (Compression
  algorithms are stored in csp_cipher_alg.)

- Drivers no longer register a list of supported algorithms.  This
  doesn't quite work when you factor in modes (e.g. a driver might
  support both AES-CBC and SHA2-256-HMAC separately but not combined
  for ETA).  Instead, a new 'crypto_probesession' method has been
  added to the kobj interface for symmteric crypto drivers.  This
  method returns a negative value on success (similar to how
  device_probe works) and the crypto framework uses this value to pick
  the "best" driver.  There are three constants for hardware
  (e.g. ccr), accelerated software (e.g. aesni), and plain software
  (cryptosoft) that give preference in that order.  One effect of this
  is that if you request only hardware when creating a new session,
  you will no longer get a session using accelerated software.
  Another effect is that the default setting to disallow software
  crypto via /dev/crypto now disables accelerated software.

  Once a driver is chosen, 'crypto_newsession' is invoked as before.

- Crypto operations are now solely described by the flat 'cryptop'
  structure.  The linked list of descriptors has been removed.

  A separate enum has been added to describe the type of data buffer
  in use instead of using CRYPTO_F_* flags to make it easier to add
  more types in the future if needed (e.g. wired userspace buffers for
  zero-copy).  It will also make it easier to re-introduce separate
  input and output buffers (in-kernel TLS would benefit from this).

  Try to make the flags related to IV handling less insane:

  - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
    member of the operation structure.  If this flag is not set, the
    IV is stored in the data buffer at the 'crp_iv_start' offset.

  - CRYPTO_F_IV_GENERATE means that a random IV should be generated
    and stored into the data buffer.  This cannot be used with
    CRYPTO_F_IV_SEPARATE.

  If a consumer wants to deal with explicit vs implicit IVs, etc. it
  can always generate the IV however it needs and store partial IVs in
  the buffer and the full IV/nonce in crp_iv and set
  CRYPTO_F_IV_SEPARATE.

  The layout of the buffer is now described via fields in cryptop.
  crp_aad_start and crp_aad_length define the boundaries of any AAD.
  Previously with GCM and CCM you defined an auth crd with this range,
  but for ETA your auth crd had to span both the AAD and plaintext
  (and they had to be adjacent).

  crp_payload_start and crp_payload_length define the boundaries of
  the plaintext/ciphertext.  Modes that only do a single operation
  (COMPRESS, CIPHER, DIGEST) should only use this region and leave the
  AAD region empty.

  If a digest is present (or should be generated), it's starting
  location is marked by crp_digest_start.

  Instead of using the CRD_F_ENCRYPT flag to determine the direction
  of the operation, cryptop now includes an 'op' field defining the
  operation to perform.  For digests I've added a new VERIFY digest
  mode which assumes a digest is present in the input and fails the
  request with EBADMSG if it doesn't match the internally-computed
  digest.  GCM and CCM already assumed this, and the new AEAD mode
  requires this for decryption.  The new ETA mode now also requires
  this for decryption, so IPsec and GELI no longer do their own
  authentication verification.  Simple DIGEST operations can also do
  this, though there are no in-tree consumers.

  To eventually support some refcounting to close races, the session
  cookie is now passed to crypto_getop() and clients should no longer
  set crp_sesssion directly.

- Assymteric crypto operation structures should be allocated via
  crypto_getkreq() and freed via crypto_freekreq().  This permits the
  crypto layer to track open asym requests and close races with a
  driver trying to unregister while asym requests are in flight.

- crypto_copyback, crypto_copydata, crypto_apply, and
  crypto_contiguous_subsegment now accept the 'crp' object as the
  first parameter instead of individual members.  This makes it easier
  to deal with different buffer types in the future as well as
  separate input and output buffers.  It's also simpler for driver
  writers to use.

- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
  This understands the various types of buffers so that drivers that
  use DMA do not have to be aware of different buffer types.

- Helper routines now exist to build an auth context for HMAC IPAD
  and OPAD.  This reduces some duplicated work among drivers.

- Key buffers are now treated as const throughout the framework and in
  device drivers.  However, session key buffers provided when a session
  is created are expected to remain alive for the duration of the
  session.

- GCM and CCM sessions now only specify a cipher algorithm and a cipher
  key.  The redundant auth information is not needed or used.

- For cryptosoft, split up the code a bit such that the 'process'
  callback now invokes a function pointer in the session.  This
  function pointer is set based on the mode (in effect) though it
  simplifies a few edge cases that would otherwise be in the switch in
  'process'.

  It does split up GCM vs CCM which I think is more readable even if there
  is some duplication.

- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
  as an auth algorithm and updated cryptocheck to work with it.

- Combined cipher and auth sessions via /dev/crypto now always use ETA
  mode.  The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
  This was actually documented as being true in crypto(4) before, but
  the code had not implemented this before I added the CIPHER_FIRST
  flag.

- I have not yet updated /dev/crypto to be aware of explicit modes for
  sessions.  I will probably do that at some point in the future as well
  as teach it about IV/nonce and tag lengths for AEAD so we can support
  all of the NIST KAT tests for GCM and CCM.

- I've split up the exising crypto.9 manpage into several pages
  of which many are written from scratch.

- I have converted all drivers and consumers in the tree and verified
  that they compile, but I have not tested all of them.  I have tested
  the following drivers:

  - cryptosoft
  - aesni (AES only)
  - blake2
  - ccr

  and the following consumers:

  - cryptodev
  - IPsec
  - ktls_ocf
  - GELI (lightly)

  I have not tested the following:

  - ccp
  - aesni with sha
  - hifn
  - kgssapi_krb5
  - ubsec
  - padlock
  - safe
  - armv8_crypto (aarch64)
  - glxsb (i386)
  - sec (ppc)
  - cesa (armv7)
  - cryptocteon (mips64)
  - nlmsec (mips64)

Discussed with:	cem
Relnotes:	yes
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00

261 lines
6.7 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2017 Conrad Meyer <cem@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#pragma once
/*
* Keccak SHAKE128 (if supported by the device?) uses a 1344 bit block.
* SHA3-224 is the next largest block size, at 1152 bits. However, crypto(4)
* doesn't support any SHA3 hash, so SHA2 is the constraint:
*/
#define CCP_HASH_MAX_BLOCK_SIZE (SHA2_512_BLOCK_LEN)
#define CCP_AES_MAX_KEY_LEN (AES_XTS_MAX_KEY)
#define CCP_MAX_CRYPTO_IV_LEN 32 /* GCM IV + GHASH context */
#define MAX_HW_QUEUES 5
#define MAX_LSB_REGIONS 8
#ifndef __must_check
#define __must_check __attribute__((__warn_unused_result__))
#endif
/*
* Internal data structures.
*/
enum sha_version {
SHA1,
#if 0
SHA2_224,
#endif
SHA2_256, SHA2_384, SHA2_512
};
/*
* XXX: The hmac.res, gmac.final_block, and blkcipher.iv fields are
* used by individual requests meaning that sessions cannot have more
* than a single request in flight at a time.
*/
struct ccp_session_hmac {
struct auth_hash *auth_hash;
int hash_len;
unsigned int auth_mode;
char ipad[CCP_HASH_MAX_BLOCK_SIZE];
char opad[CCP_HASH_MAX_BLOCK_SIZE];
char res[CCP_HASH_MAX_BLOCK_SIZE];
};
struct ccp_session_gmac {
int hash_len;
char final_block[GMAC_BLOCK_LEN];
};
struct ccp_session_blkcipher {
unsigned cipher_mode;
unsigned cipher_type;
unsigned key_len;
char enckey[CCP_AES_MAX_KEY_LEN];
char iv[CCP_MAX_CRYPTO_IV_LEN];
};
struct ccp_session {
bool active;
int pending;
enum { HMAC, BLKCIPHER, AUTHENC, GCM } mode;
unsigned queue;
union {
struct ccp_session_hmac hmac;
struct ccp_session_gmac gmac;
};
struct ccp_session_blkcipher blkcipher;
};
struct ccp_softc;
struct ccp_queue {
struct mtx cq_lock;
unsigned cq_qindex;
struct ccp_softc *cq_softc;
/* Host memory and tracking structures for descriptor ring. */
bus_dma_tag_t ring_desc_tag;
bus_dmamap_t ring_desc_map;
struct ccp_desc *desc_ring;
bus_addr_t desc_ring_bus_addr;
/* Callbacks and arguments ring; indices correspond to above ring. */
struct ccp_completion_ctx *completions_ring;
uint32_t qcontrol; /* Cached register value */
unsigned lsb_mask; /* LSBs available to queue */
int private_lsb; /* Reserved LSB #, or -1 */
unsigned cq_head;
unsigned cq_tail;
unsigned cq_acq_tail;
bool cq_waiting; /* Thread waiting for space */
struct sglist *cq_sg_crp;
struct sglist *cq_sg_ulptx;
struct sglist *cq_sg_dst;
};
struct ccp_completion_ctx {
void (*callback_fn)(struct ccp_queue *qp, struct ccp_session *s,
void *arg, int error);
void *callback_arg;
struct ccp_session *session;
};
struct ccp_softc {
device_t dev;
int32_t cid;
struct mtx lock;
bool detaching;
unsigned ring_size_order;
/*
* Each command queue is either public or private. "Private"
* (PSP-only) by default. PSP grants access to some queues to host via
* QMR (Queue Mask Register). Set bits are host accessible.
*/
uint8_t valid_queues;
uint8_t hw_version;
uint8_t num_queues;
uint16_t hw_features;
uint16_t num_lsb_entries;
/* Primary BAR (RID 2) used for register access */
bus_space_tag_t pci_bus_tag;
bus_space_handle_t pci_bus_handle;
int pci_resource_id;
struct resource *pci_resource;
/* Secondary BAR (RID 5) apparently used for MSI-X */
int pci_resource_id_msix;
struct resource *pci_resource_msix;
/* Interrupt resources */
void *intr_tag[2];
struct resource *intr_res[2];
unsigned intr_count;
struct ccp_queue queues[MAX_HW_QUEUES];
};
/* Internal globals */
SYSCTL_DECL(_hw_ccp);
MALLOC_DECLARE(M_CCP);
extern bool g_debug_print;
extern struct ccp_softc *g_ccp_softc;
/*
* Debug macros.
*/
#define DPRINTF(dev, ...) do { \
if (!g_debug_print) \
break; \
if ((dev) != NULL) \
device_printf((dev), "XXX " __VA_ARGS__); \
else \
printf("ccpXXX: " __VA_ARGS__); \
} while (0)
#if 0
#define INSECURE_DEBUG(dev, ...) do { \
if (!g_debug_print) \
break; \
if ((dev) != NULL) \
device_printf((dev), "XXX " __VA_ARGS__); \
else \
printf("ccpXXX: " __VA_ARGS__); \
} while (0)
#else
#define INSECURE_DEBUG(dev, ...)
#endif
/*
* Internal hardware manipulation routines.
*/
int ccp_hw_attach(device_t dev);
void ccp_hw_detach(device_t dev);
void ccp_queue_write_tail(struct ccp_queue *qp);
#ifdef DDB
void db_ccp_show_hw(struct ccp_softc *sc);
void db_ccp_show_queue_hw(struct ccp_queue *qp);
#endif
/*
* Internal hardware crypt-op submission routines.
*/
int ccp_authenc(struct ccp_queue *sc, struct ccp_session *s,
struct cryptop *crp) __must_check;
int ccp_blkcipher(struct ccp_queue *sc, struct ccp_session *s,
struct cryptop *crp) __must_check;
int ccp_gcm(struct ccp_queue *sc, struct ccp_session *s, struct cryptop *crp)
__must_check;
int ccp_hmac(struct ccp_queue *sc, struct ccp_session *s, struct cryptop *crp)
__must_check;
/*
* Internal hardware TRNG read routine.
*/
u_int random_ccp_read(void *v, u_int c);
/* XXX */
int ccp_queue_acquire_reserve(struct ccp_queue *qp, unsigned n, int mflags)
__must_check;
void ccp_queue_abort(struct ccp_queue *qp);
void ccp_queue_release(struct ccp_queue *qp);
/*
* Internal inline routines.
*/
static inline unsigned
ccp_queue_get_active(struct ccp_queue *qp)
{
struct ccp_softc *sc;
sc = qp->cq_softc;
return ((qp->cq_tail - qp->cq_head) & ((1 << sc->ring_size_order) - 1));
}
static inline unsigned
ccp_queue_get_ring_space(struct ccp_queue *qp)
{
struct ccp_softc *sc;
sc = qp->cq_softc;
return ((1 << sc->ring_size_order) - ccp_queue_get_active(qp) - 1);
}