freebsd-dev/sys/mips/conf/AP96
Warner Losh d4f95c889d In kernel config files, it is supposed to be 'options<space><tab>' not
'options<tab><tab>', per long standing (but recently not so strictly
enforced) convention.
2014-03-18 14:41:18 +00:00

46 lines
1.1 KiB
Plaintext

#
# Specific board setup for the Atheros AP96 reference board.
#
# The AP96 has the following hardware:
#
# + AR7161 CPU SoC
# + AR9223 2.4GHz 11n
# + AR9220 5GHz 11n
# + AR8316 10/100/1000 switch
# + m25p64 based 8MB flash
# + 64mb RAM
# + uboot environment
# $FreeBSD$
include "AR71XX_BASE"
ident "AP96"
hints "AP96.hints"
options AR71XX_REALMEM=64*1024*1024
options AR71XX_ENV_UBOOT
# For DOS - enable if required
options MSDOSFS
# uncompress - to boot read-only lzma natively from flash
device geom_uncompress
options GEOM_UNCOMPRESS
options ROOTDEVNAME=\"ufs:/dev/map/rootfs.uncompress\"
# Used for the static uboot partition map
device geom_map
# Options needed for the EEPROM based calibration/PCI configuration data.
options AR71XX_ATH_EEPROM # Fetch EEPROM/PCI config from flash
options ATH_EEPROM_FIRMWARE # Use EEPROM from flash
device firmware # Used by the above
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch