freebsd-dev/sys/mips/conf/ROUTERSTATION.hints
Luiz Otavio O Souza 2557c4beb1 Add the default hints to make the GPIO pins, rf led and reset switch work
out of the box on RouterStation.

PR:	177832
Submitted by:	Petko Bordjukov (bordjukov@gmail.com)
Approved by:	adrian (mentor)
2013-08-28 14:43:04 +00:00

49 lines
1.0 KiB
Plaintext

#
# $FreeBSD$
#
# arge0 mdio bus
hint.argemdio.0.at="nexus0"
hint.argemdio.0.maddr=0x19000000
hint.argemdio.0.msize=0x1000
hint.argemdio.0.order=0
# Uncomment this hint for RS (not PRO)
# PHY20 = 1 << 20
hint.arge.0.phymask=0x100000
hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus
# should be 100 for RS
hint.arge.1.media=100
hint.arge.1.fduplex=1
hint.arge.1.phymask=0x0
hint.arge.1.mdio=mdioproxy1 # .. off of the switch mdiobus
# ukswitch
hint.ukswitch.0.at="mdio0"
hint.ukswitch.0.phymask=0x30000
# Don't flip on anything that isn't already enabled.
# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
# not used here.
hint.gpio.0.function_set=0x00000000
hint.gpio.0.function_clear=0x00000000
# These are the GPIO LEDs and buttons which can be software controlled.
hint.gpio.0.pinmask=0x000000ff
# GPIO 0: Pin 1
# GPIO 1: Pin 2
# GPIO 2: RF LED
# GPIO 3: Pin 3
# GPIO 4: Pin 4
# GPIO 5: Pin 5
# GPIO 6: Pin 6
# GPIO 7: Pin 7
# RF led
hint.gpioled.0.at="gpiobus0"
hint.gpioled.0.name="rf"
# pin 2
hint.gpioled.0.pins=0x0004