freebsd-dev/sys/dev/mii
Pyun YongHyeon d2cd226334 Use auto-negotiation for manual media type selection. This fixes
establishment of 10/100Mbps link on Atheros AR8121(L1E).
2008-10-25 06:39:17 +00:00
..
acphy.c Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL 2007-01-12 22:59:38 +00:00
acphyreg.h - Correct the AC_MCTL_BYP_PCS constant. 2007-01-12 22:58:04 +00:00
amphy.c Fix a typo in a comment. 2008-01-27 01:11:57 +00:00
amphyreg.h
atphy.c Use auto-negotiation for manual media type selection. This fixes 2008-10-25 06:39:17 +00:00
atphyreg.h Add Attansic/Atheros F1 PHY driver. 2008-05-19 01:12:10 +00:00
bmtphy.c
bmtphyreg.h
brgphy.c Restore link state handling which was broken in rev 1.69. 2008-08-12 00:57:39 +00:00
brgphyreg.h Add support for the BCM5906[M] adapters. These adapters only support 2008-04-29 19:47:13 +00:00
ciphy.c Correct PHY description and OUI of VSC8211. Previously VSC8211 was 2008-10-23 01:27:15 +00:00
ciphyreg.h Add support Vitesse VSC8601 PHY that is found on nVidia network 2007-06-06 06:55:49 +00:00
e1000phy.c Some 88E1149 PHY's page select is initialized to point to other 2008-10-17 05:26:51 +00:00
e1000phyreg.h Add 88E1116/88E1116R PHY support code that takes the PHY out of 2007-10-29 05:50:22 +00:00
exphy.c - Take advantage of mii_phy_dev_probe(). 2007-01-12 23:17:43 +00:00
gentbi.c - Remove MIIF_NOISOLATE; there's generally no reason to let gentbi(4) 2007-10-29 21:11:55 +00:00
icsphy.c Add icsphy(4), Integrated Circuit Systems PHY driver, ported from 2007-06-11 02:04:50 +00:00
icsphyreg.h Add icsphy(4), Integrated Circuit Systems PHY driver, ported from 2007-06-11 02:04:50 +00:00
inphy.c Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table 2007-01-12 22:27:46 +00:00
inphyreg.h
ip1000phy.c Add support for IC Plus IP1001 PHY. 2008-04-05 00:52:07 +00:00
ip1000phyreg.h Add support for IC Plus IP1001 PHY. 2008-04-05 00:52:07 +00:00
jmphy.c Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00
jmphyreg.h Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00
lxtphy.c Add support for the Apple Big Mac (BMAC) Ethernet controller, 2008-06-07 22:58:32 +00:00
lxtphyreg.h
mii_physubr.c Remove mii_media_from_bmcr(); all previous users have been converted to 2007-01-13 00:14:45 +00:00
mii.c Revert bogusly committed file. 2008-08-23 07:46:58 +00:00
mii.h
miibus_if.m
miidevs Correct PHY description and OUI of VSC8211. Previously VSC8211 was 2008-10-23 01:27:15 +00:00
miivar.h Remove mii_media_from_bmcr(); all previous users have been converted to 2007-01-13 00:14:45 +00:00
mlphy.c Move the code that looks for the companion phy to a subroutine to make 2008-08-23 15:50:18 +00:00
nsgphy.c
nsgphyreg.h
nsphy.c - Fix a typo in a comment. 2008-01-27 01:30:02 +00:00
nsphyreg.h
nsphyter.c Add a driver for the National Semiconductor DP83815, DP83843 and 2008-01-27 01:10:41 +00:00
nsphyterreg.h Add a driver for the National Semiconductor DP83815, DP83843 and 2008-01-27 01:10:41 +00:00
pnaphy.c
qsphy.c
qsphyreg.h
rgephy.c Fix a copy/paste error 2008-08-06 07:52:59 +00:00
rgephyreg.h Add RTL8211C(L) support. 2008-07-02 08:10:18 +00:00
rlphy.c IEEE 802.3 Annex 28B.3 explicitly specifies the following relative 2007-11-16 10:25:36 +00:00
rlswitch.c MFp4: add basic driver for RTL8305SC switch in PHY emulation 2007-01-05 01:46:26 +00:00
ruephy.c - Take advantage of mii_phy_dev_probe() and mii_phy_setmedia(). 2007-01-13 00:06:41 +00:00
ruephyreg.h
smcphy.c This is a rewritten driver for the SMSC LAN91C111. It's based in part on the 2008-06-06 05:00:49 +00:00
tdkphy.c IEEE 802.3 Annex 28B.3 explicitly specifies the following relative 2007-11-16 10:25:36 +00:00
tdkphyreg.h
tlphy.c It turns out that my analysis of the error handling here was wrong. 2008-08-23 15:29:28 +00:00
tlphyreg.h
truephy.c Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit 2008-06-20 19:30:44 +00:00
truephyreg.h Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit 2008-06-20 19:30:44 +00:00
ukphy_subr.c IEEE 802.3 Annex 28B.3 explicitly specifies the following relative 2007-11-16 10:25:36 +00:00
ukphy.c - Don't set MIIF_NOISOLATE so ukphy(4) can be used in configurations with 2007-01-20 00:52:29 +00:00
xmphy.c
xmphyreg.h