freebsd-dev/contrib/tzdata/leap-seconds.list
Edwin Groothuis c26a580251 MFV of 255902, tzdata2013f
MFV of 257651, tzdata2013h

tzdata2013f
- Jordan goes to winter time on the last Friday in October.
- Tocantins in Brazil will not go into summer time in October.
- Indonesian time zones renames.
- Lots of cleanups in with regarding to links and historical data.

tzdata2013h
- Libya didn't go back to DST.
- Fix Morocco 2038 issue.
- Brazil/Acre and Western Amazonas are chaning timezones.
2013-11-05 06:32:23 +00:00

232 lines
9.2 KiB
Plaintext

#
# In the following text, the symbol '#' introduces
# a comment, which continues from that symbol until
# the end of the line. A plain comment line has a
# whitespace character following the comment indicator.
# There are also special comment lines defined below.
# A special comment will always have a non-whitespace
# character in column 2.
#
# A blank line should be ignored.
#
# The following table shows the corrections that must
# be applied to compute International Atomic Time (TAI)
# from the Coordinated Universal Time (UTC) values that
# are transmitted by almost all time services.
#
# The first column shows an epoch as a number of seconds
# since 1900.0 and the second column shows the number of
# seconds that must be added to UTC to compute TAI for
# any timestamp at or after that epoch. The value on
# each line is valid from the indicated initial instant
# until the epoch given on the next one or indefinitely
# into the future if there is no next line.
# (The comment on each line shows the representation of
# the corresponding initial epoch in the usual
# day-month-year format. The epoch always begins at
# 00:00:00 UTC on the indicated day. See Note 5 below.)
#
# Important notes:
#
# 1. Coordinated Universal Time (UTC) is often referred to
# as Greenwich Mean Time (GMT). The GMT time scale is no
# longer used, and the use of GMT to designate UTC is
# discouraged.
#
# 2. The UTC time scale is realized by many national
# laboratories and timing centers. Each laboratory
# identifies its realization with its name: Thus
# UTC(NIST), UTC(USNO), etc. The differences among
# these different realizations are typically on the
# order of a few nanoseconds (i.e., 0.000 000 00x s)
# and can be ignored for many purposes. These differences
# are tabulated in Circular T, which is published monthly
# by the International Bureau of Weights and Measures
# (BIPM). See www.bipm.fr for more information.
#
# 3. The current defintion of the relationship between UTC
# and TAI dates from 1 January 1972. A number of different
# time scales were in use before than epoch, and it can be
# quite difficult to compute precise timestamps and time
# intervals in those "prehistoric" days. For more information,
# consult:
#
# The Explanatory Supplement to the Astronomical
# Ephemeris.
# or
# Terry Quinn, "The BIPM and the Accurate Measurement
# of Time," Proc. of the IEEE, Vol. 79, pp. 894-905,
# July, 1991.
#
# 4. The insertion of leap seconds into UTC is currently the
# responsibility of the International Earth Rotation Service,
# which is located at the Paris Observatory:
#
# Central Bureau of IERS
# 61, Avenue de l'Observatoire
# 75014 Paris, France.
#
# Leap seconds are announced by the IERS in its Bulletin C
#
# See hpiers.obspm.fr or www.iers.org for more details.
#
# All national laboratories and timing centers use the
# data from the BIPM and the IERS to construct their
# local realizations of UTC.
#
# Although the definition also includes the possibility
# of dropping seconds ("negative" leap seconds), this has
# never been done and is unlikely to be necessary in the
# foreseeable future.
#
# 5. If your system keeps time as the number of seconds since
# some epoch (e.g., NTP timestamps), then the algorithm for
# assigning a UTC time stamp to an event that happens during a positive
# leap second is not well defined. The official name of that leap
# second is 23:59:60, but there is no way of representing that time
# in these systems.
# Many systems of this type effectively stop the system clock for
# one second during the leap second and use a time that is equivalent
# to 23:59:59 UTC twice. For these systems, the corresponding TAI
# timestamp would be obtained by advancing to the next entry in the
# following table when the time equivalent to 23:59:59 UTC
# is used for the second time. Thus the leap second which
# occurred on 30 June 1972 at 23:59:59 UTC would have TAI
# timestamps computed as follows:
#
# ...
# 30 June 1972 23:59:59 (2287785599, first time): TAI= UTC + 10 seconds
# 30 June 1972 23:59:60 (2287785599,second time): TAI= UTC + 11 seconds
# 1 July 1972 00:00:00 (2287785600) TAI= UTC + 11 seconds
# ...
#
# If your system realizes the leap second by repeating 00:00:00 UTC twice
# (this is possible but not usual), then the advance to the next entry
# in the table must occur the second time that a time equivlent to
# 00:00:00 UTC is used. Thus, using the same example as above:
#
# ...
# 30 June 1972 23:59:59 (2287785599): TAI= UTC + 10 seconds
# 30 June 1972 23:59:60 (2287785600, first time): TAI= UTC + 10 seconds
# 1 July 1972 00:00:00 (2287785600,second time): TAI= UTC + 11 seconds
# ...
#
# in both cases the use of timestamps based on TAI produces a smooth
# time scale with no discontinuity in the time interval.
#
# This complexity would not be needed for negative leap seconds (if they
# are ever used). The UTC time would skip 23:59:59 and advance from
# 23:59:58 to 00:00:00 in that case. The TAI offset would decrease by
# 1 second at the same instant. This is a much easier situation to deal
# with, since the difficulty of unambiguously representing the epoch
# during the leap second does not arise.
#
# Questions or comments to:
# Judah Levine
# Time and Frequency Division
# NIST
# Boulder, Colorado
# jlevine@boulder.nist.gov
#
# Last Update of leap second values: 11 January 2012
#
# The following line shows this last update date in NTP timestamp
# format. This is the date on which the most recent change to
# the leap second data was added to the file. This line can
# be identified by the unique pair of characters in the first two
# columns as shown below.
#
#$ 3535228800
#
# The NTP timestamps are in units of seconds since the NTP epoch,
# which is 1900.0. The Modified Julian Day number corresponding
# to the NTP time stamp, X, can be computed as
#
# X/86400 + 15020
#
# where the first term converts seconds to days and the second
# term adds the MJD corresponding to 1900.0. The integer portion
# of the result is the integer MJD for that day, and any remainder
# is the time of day, expressed as the fraction of the day since 0
# hours UTC. The conversion from day fraction to seconds or to
# hours, minutes, and seconds may involve rounding or truncation,
# depending on the method used in the computation.
#
# The data in this file will be updated periodically as new leap
# seconds are announced. In addition to being entered on the line
# above, the update time (in NTP format) will be added to the basic
# file name leap-seconds to form the name leap-seconds.<NTP TIME>.
# In addition, the generic name leap-seconds.list will always point to
# the most recent version of the file.
#
# This update procedure will be performed only when a new leap second
# is announced.
#
# The following entry specifies the expiration date of the data
# in this file in units of seconds since 1900.0. This expiration date
# will be changed at least twice per year whether or not a new leap
# second is announced. These semi-annual changes will be made no
# later than 1 June and 1 December of each year to indicate what
# action (if any) is to be taken on 30 June and 31 December,
# respectively. (These are the customary effective dates for new
# leap seconds.) This expiration date will be identified by a
# unique pair of characters in columns 1 and 2 as shown below.
# In the unlikely event that a leap second is announced with an
# effective date other than 30 June or 31 December, then this
# file will be edited to include that leap second as soon as it is
# announced or at least one month before the effective date
# (whichever is later).
# If an announcement by the IERS specifies that no leap second is
# scheduled, then only the expiration date of the file will
# be advanced to show that the information in the file is still
# current -- the update time stamp, the data and the name of the file
# will not change.
#
# Updated through IERS Bulletin C46
# File expires on: 28 June 2014
#
#@ 3612902400
#
2272060800 10 # 1 Jan 1972
2287785600 11 # 1 Jul 1972
2303683200 12 # 1 Jan 1973
2335219200 13 # 1 Jan 1974
2366755200 14 # 1 Jan 1975
2398291200 15 # 1 Jan 1976
2429913600 16 # 1 Jan 1977
2461449600 17 # 1 Jan 1978
2492985600 18 # 1 Jan 1979
2524521600 19 # 1 Jan 1980
2571782400 20 # 1 Jul 1981
2603318400 21 # 1 Jul 1982
2634854400 22 # 1 Jul 1983
2698012800 23 # 1 Jul 1985
2776982400 24 # 1 Jan 1988
2840140800 25 # 1 Jan 1990
2871676800 26 # 1 Jan 1991
2918937600 27 # 1 Jul 1992
2950473600 28 # 1 Jul 1993
2982009600 29 # 1 Jul 1994
3029443200 30 # 1 Jan 1996
3076704000 31 # 1 Jul 1997
3124137600 32 # 1 Jan 1999
3345062400 33 # 1 Jan 2006
3439756800 34 # 1 Jan 2009
3550089600 35 # 1 Jul 2012
#
# the following special comment contains the
# hash value of the data in this file computed
# use the secure hash algorithm as specified
# by FIPS 180-1. See the files in ~/pub/sha for
# the details of how this hash value is
# computed. Note that the hash computation
# ignores comments and whitespace characters
# in data lines. It includes the NTP values
# of both the last modification time and the
# expiration time of the file, but not the
# white space on those lines.
# the hash line is also ignored in the
# computation.
#
#h 1151a8f e85a5069 9000fcdb 3d5e5365 1d505b37