freebsd-dev/sys/netinet/ip_divert.c
Gleb Smirnoff fec8a8c7cb inpcb: use global UMA zones for protocols
Provide structure inpcbstorage, that holds zones and lock names for
a protocol.  Initialize it with global protocol init using macro
INPCBSTORAGE_DEFINE().  Then, at VNET protocol init supply it as
the main argument to the in_pcbinfo_init().  Each VNET pcbinfo uses
its private hash, but they all use same zone to allocate and SMR
section to synchronize.

Note: there is kern.ipc.maxsockets sysctl, which controls UMA limit
on the socket zone, which was always global.  Historically same
maxsockets value is applied also to every PCB zone.  Important fact:
you can't create a pcb without a socket!  A pcb may outlive its socket,
however.  Given that there are multiple protocols, and only one socket
zone, the per pcb zone limits seem to have little value.  Under very
special conditions it may trigger a little bit earlier than socket zone
limit, but in most setups the socket zone limit will be triggered
earlier.  When VIMAGE was added to the kernel PCB zones became per-VNET.
This magnified existing disbalance further: now we have multiple pcb
zones in multiple vnets limited to maxsockets, but every pcb requires a
socket allocated from the global zone also limited by maxsockets.
IMHO, this per pcb zone limit doesn't bring any value, so this patch
drops it.  If anybody explains value of this limit, it can be restored
very easy - just 2 lines change to in_pcbstorage_init().

Differential revision:	https://reviews.freebsd.org/D33542
2022-01-03 10:17:46 -08:00

831 lines
22 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_sctp.h"
#ifndef INET
#error "IPDIVERT requires INET"
#endif
#include <sys/param.h>
#include <sys/eventhandler.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/kernel.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
#include <net/vnet.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/netisr.h>
#include <netinet/in.h>
#include <netinet/in_pcb.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#ifdef INET6
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#endif
#if defined(SCTP) || defined(SCTP_SUPPORT)
#include <netinet/sctp_crc32.h>
#endif
#include <security/mac/mac_framework.h>
/*
* Divert sockets
*/
/*
* Allocate enough space to hold a full IP packet
*/
#define DIVSNDQ (65536 + 100)
#define DIVRCVQ (65536 + 100)
/*
* Divert sockets work in conjunction with ipfw or other packet filters,
* see the divert(4) manpage for features.
* Packets are selected by the packet filter and tagged with an
* MTAG_IPFW_RULE tag carrying the 'divert port' number (as set by
* the packet filter) and information on the matching filter rule for
* subsequent reinjection. The divert_port is used to put the packet
* on the corresponding divert socket, while the rule number is passed
* up (at least partially) as the sin_port in the struct sockaddr.
*
* Packets written to the divert socket carry in sin_addr a
* destination address, and in sin_port the number of the filter rule
* after which to continue processing.
* If the destination address is INADDR_ANY, the packet is treated as
* as outgoing and sent to ip_output(); otherwise it is treated as
* incoming and sent to ip_input().
* Further, sin_zero carries some information on the interface,
* which can be used in the reinject -- see comments in the code.
*
* On reinjection, processing in ip_input() and ip_output()
* will be exactly the same as for the original packet, except that
* packet filter processing will start at the rule number after the one
* written in the sin_port (ipfw does not allow a rule #0, so sin_port=0
* will apply the entire ruleset to the packet).
*/
/* Internal variables. */
VNET_DEFINE_STATIC(struct inpcbinfo, divcbinfo);
#define V_divcbinfo VNET(divcbinfo)
static u_long div_sendspace = DIVSNDQ; /* XXX sysctl ? */
static u_long div_recvspace = DIVRCVQ; /* XXX sysctl ? */
static int div_output_inbound(int fmaily, struct socket *so, struct mbuf *m,
struct sockaddr_in *sin);
static int div_output_outbound(int family, struct socket *so, struct mbuf *m);
/*
* Initialize divert connection block queue.
*/
INPCBSTORAGE_DEFINE(divcbstor, "divinp", "divcb", "div", "divhash");
static void
div_init(void *arg __unused)
{
/*
* XXX We don't use the hash list for divert IP, but it's easier to
* allocate one-entry hash lists than it is to check all over the
* place for hashbase == NULL.
*/
in_pcbinfo_init(&V_divcbinfo, &divcbstor, 1, 1);
}
VNET_SYSINIT(div_init, SI_SUB_PROTO_DOMAIN, SI_ORDER_THIRD, div_init, NULL);
static void
div_destroy(void *unused __unused)
{
in_pcbinfo_destroy(&V_divcbinfo);
}
VNET_SYSUNINIT(divert, SI_SUB_PROTO_DOMAIN, SI_ORDER_THIRD, div_destroy, NULL);
/*
* IPPROTO_DIVERT is not in the real IP protocol number space; this
* function should never be called. Just in case, drop any packets.
*/
static int
div_input(struct mbuf **mp, int *offp, int proto)
{
struct mbuf *m = *mp;
KMOD_IPSTAT_INC(ips_noproto);
m_freem(m);
return (IPPROTO_DONE);
}
static bool
div_port_match(const struct inpcb *inp, void *v)
{
uint16_t nport = *(uint16_t *)v;
return (inp->inp_lport == nport);
}
/*
* Divert a packet by passing it up to the divert socket at port 'port'.
*
* Setup generic address and protocol structures for div_input routine,
* then pass them along with mbuf chain.
*/
static void
divert_packet(struct mbuf *m, bool incoming)
{
struct ip *ip;
struct inpcb *inp;
struct socket *sa;
u_int16_t nport;
struct sockaddr_in divsrc;
struct inpcb_iterator inpi = INP_ITERATOR(&V_divcbinfo,
INPLOOKUP_RLOCKPCB, div_port_match, &nport);
struct m_tag *mtag;
NET_EPOCH_ASSERT();
mtag = m_tag_locate(m, MTAG_IPFW_RULE, 0, NULL);
if (mtag == NULL) {
m_freem(m);
return;
}
/* Assure header */
if (m->m_len < sizeof(struct ip) &&
(m = m_pullup(m, sizeof(struct ip))) == NULL)
return;
ip = mtod(m, struct ip *);
/* Delayed checksums are currently not compatible with divert. */
if (m->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
in_delayed_cksum(m);
m->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA;
}
#if defined(SCTP) || defined(SCTP_SUPPORT)
if (m->m_pkthdr.csum_flags & CSUM_SCTP) {
sctp_delayed_cksum(m, (uint32_t)(ip->ip_hl << 2));
m->m_pkthdr.csum_flags &= ~CSUM_SCTP;
}
#endif
#ifdef INET6
if (m->m_pkthdr.csum_flags & CSUM_DELAY_DATA_IPV6) {
in6_delayed_cksum(m, m->m_pkthdr.len -
sizeof(struct ip6_hdr), sizeof(struct ip6_hdr));
m->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA_IPV6;
}
#if defined(SCTP) || defined(SCTP_SUPPORT)
if (m->m_pkthdr.csum_flags & CSUM_SCTP_IPV6) {
sctp_delayed_cksum(m, sizeof(struct ip6_hdr));
m->m_pkthdr.csum_flags &= ~CSUM_SCTP_IPV6;
}
#endif
#endif /* INET6 */
bzero(&divsrc, sizeof(divsrc));
divsrc.sin_len = sizeof(divsrc);
divsrc.sin_family = AF_INET;
/* record matching rule, in host format */
divsrc.sin_port = ((struct ipfw_rule_ref *)(mtag+1))->rulenum;
/*
* Record receive interface address, if any.
* But only for incoming packets.
*/
if (incoming) {
struct ifaddr *ifa;
struct ifnet *ifp;
/* Sanity check */
M_ASSERTPKTHDR(m);
/* Find IP address for receive interface */
ifp = m->m_pkthdr.rcvif;
CK_STAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
divsrc.sin_addr =
((struct sockaddr_in *) ifa->ifa_addr)->sin_addr;
break;
}
}
/*
* Record the incoming interface name whenever we have one.
*/
if (m->m_pkthdr.rcvif) {
/*
* Hide the actual interface name in there in the
* sin_zero array. XXX This needs to be moved to a
* different sockaddr type for divert, e.g.
* sockaddr_div with multiple fields like
* sockaddr_dl. Presently we have only 7 bytes
* but that will do for now as most interfaces
* are 4 or less + 2 or less bytes for unit.
* There is probably a faster way of doing this,
* possibly taking it from the sockaddr_dl on the iface.
* This solves the problem of a P2P link and a LAN interface
* having the same address, which can result in the wrong
* interface being assigned to the packet when fed back
* into the divert socket. Theoretically if the daemon saves
* and re-uses the sockaddr_in as suggested in the man pages,
* this iface name will come along for the ride.
* (see div_output for the other half of this.)
*/
strlcpy(divsrc.sin_zero, m->m_pkthdr.rcvif->if_xname,
sizeof(divsrc.sin_zero));
}
/* Put packet on socket queue, if any */
sa = NULL;
/* nport is inp_next's context. */
nport = htons((u_int16_t)(((struct ipfw_rule_ref *)(mtag+1))->info));
while ((inp = inp_next(&inpi)) != NULL) {
sa = inp->inp_socket;
SOCKBUF_LOCK(&sa->so_rcv);
if (sbappendaddr_locked(&sa->so_rcv,
(struct sockaddr *)&divsrc, m, NULL) == 0) {
soroverflow_locked(sa);
sa = NULL; /* force mbuf reclaim below */
} else
sorwakeup_locked(sa);
/* XXX why does only one socket match? */
INP_RUNLOCK(inp);
break;
}
if (sa == NULL) {
m_freem(m);
KMOD_IPSTAT_INC(ips_noproto);
KMOD_IPSTAT_DEC(ips_delivered);
}
}
/*
* Deliver packet back into the IP processing machinery.
*
* If no address specified, or address is 0.0.0.0, send to ip_output();
* otherwise, send to ip_input() and mark as having been received on
* the interface with that address.
*/
static int
div_output(struct socket *so, struct mbuf *m, struct sockaddr_in *sin,
struct mbuf *control)
{
struct epoch_tracker et;
const struct ip *ip;
struct m_tag *mtag;
struct ipfw_rule_ref *dt;
int error, family;
if (control) {
m_freem(control); /* XXX */
control = NULL;
}
if (sin != NULL) {
if (sin->sin_family != AF_INET) {
m_freem(m);
return (EAFNOSUPPORT);
}
if (sin->sin_len != sizeof(*sin)) {
m_freem(m);
return (EINVAL);
}
}
/*
* An mbuf may hasn't come from userland, but we pretend
* that it has.
*/
m->m_pkthdr.rcvif = NULL;
m->m_nextpkt = NULL;
M_SETFIB(m, so->so_fibnum);
mtag = m_tag_locate(m, MTAG_IPFW_RULE, 0, NULL);
if (mtag == NULL) {
/* this should be normal */
mtag = m_tag_alloc(MTAG_IPFW_RULE, 0,
sizeof(struct ipfw_rule_ref), M_NOWAIT | M_ZERO);
if (mtag == NULL) {
m_freem(m);
return (ENOBUFS);
}
m_tag_prepend(m, mtag);
}
dt = (struct ipfw_rule_ref *)(mtag+1);
/* Loopback avoidance and state recovery */
if (sin) {
int i;
/* set the starting point. We provide a non-zero slot,
* but a non_matching chain_id to skip that info and use
* the rulenum/rule_id.
*/
dt->slot = 1; /* dummy, chain_id is invalid */
dt->chain_id = 0;
dt->rulenum = sin->sin_port+1; /* host format ? */
dt->rule_id = 0;
/* XXX: broken for IPv6 */
/*
* Find receive interface with the given name, stuffed
* (if it exists) in the sin_zero[] field.
* The name is user supplied data so don't trust its size
* or that it is zero terminated.
*/
for (i = 0; i < sizeof(sin->sin_zero) && sin->sin_zero[i]; i++)
;
if ( i > 0 && i < sizeof(sin->sin_zero))
m->m_pkthdr.rcvif = ifunit(sin->sin_zero);
}
ip = mtod(m, struct ip *);
switch (ip->ip_v) {
case IPVERSION:
family = AF_INET;
break;
#ifdef INET6
case IPV6_VERSION >> 4:
family = AF_INET6;
break;
#endif
default:
m_freem(m);
return (EAFNOSUPPORT);
}
/* Reinject packet into the system as incoming or outgoing */
NET_EPOCH_ENTER(et);
if (!sin || sin->sin_addr.s_addr == 0) {
dt->info |= IPFW_IS_DIVERT | IPFW_INFO_OUT;
error = div_output_outbound(family, so, m);
} else {
dt->info |= IPFW_IS_DIVERT | IPFW_INFO_IN;
error = div_output_inbound(family, so, m, sin);
}
NET_EPOCH_EXIT(et);
return (error);
}
/*
* Sends mbuf @m to the wire via ip[6]_output().
*
* Returns 0 on success or an errno value on failure. @m is always consumed.
*/
static int
div_output_outbound(int family, struct socket *so, struct mbuf *m)
{
struct ip *const ip = mtod(m, struct ip *);
struct mbuf *options;
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
INP_RLOCK(inp);
switch (family) {
case AF_INET:
/*
* Don't allow both user specified and setsockopt
* options, and don't allow packet length sizes that
* will crash.
*/
if ((((ip->ip_hl << 2) != sizeof(struct ip)) &&
inp->inp_options != NULL) ||
((u_short)ntohs(ip->ip_len) > m->m_pkthdr.len)) {
INP_RUNLOCK(inp);
m_freem(m);
return (EINVAL);
}
break;
#ifdef INET6
case AF_INET6:
{
struct ip6_hdr *const ip6 = mtod(m, struct ip6_hdr *);
/* Don't allow packet length sizes that will crash */
if (((u_short)ntohs(ip6->ip6_plen) > m->m_pkthdr.len)) {
INP_RUNLOCK(inp);
m_freem(m);
return (EINVAL);
}
break;
}
#endif
}
/* Send packet to output processing */
KMOD_IPSTAT_INC(ips_rawout); /* XXX */
#ifdef MAC
mac_inpcb_create_mbuf(inp, m);
#endif
/*
* Get ready to inject the packet into ip_output().
* Just in case socket options were specified on the
* divert socket, we duplicate them. This is done
* to avoid having to hold the PCB locks over the call
* to ip_output(), as doing this results in a number of
* lock ordering complexities.
*
* Note that we set the multicast options argument for
* ip_output() to NULL since it should be invariant that
* they are not present.
*/
KASSERT(inp->inp_moptions == NULL,
("multicast options set on a divert socket"));
/*
* XXXCSJP: It is unclear to me whether or not it makes
* sense for divert sockets to have options. However,
* for now we will duplicate them with the INP locks
* held so we can use them in ip_output() without
* requring a reference to the pcb.
*/
options = NULL;
if (inp->inp_options != NULL) {
options = m_dup(inp->inp_options, M_NOWAIT);
if (options == NULL) {
INP_RUNLOCK(inp);
m_freem(m);
return (ENOBUFS);
}
}
INP_RUNLOCK(inp);
error = 0;
switch (family) {
case AF_INET:
error = ip_output(m, options, NULL,
((so->so_options & SO_DONTROUTE) ? IP_ROUTETOIF : 0)
| IP_ALLOWBROADCAST | IP_RAWOUTPUT, NULL, NULL);
break;
#ifdef INET6
case AF_INET6:
error = ip6_output(m, NULL, NULL, 0, NULL, NULL, NULL);
break;
#endif
}
if (options != NULL)
m_freem(options);
return (error);
}
/*
* Schedules mbuf @m for local processing via IPv4/IPv6 netisr queue.
*
* Returns 0 on success or an errno value on failure. @m is always consumed.
*/
static int
div_output_inbound(int family, struct socket *so, struct mbuf *m,
struct sockaddr_in *sin)
{
const struct ip *ip;
struct ifaddr *ifa;
if (m->m_pkthdr.rcvif == NULL) {
/*
* No luck with the name, check by IP address.
* Clear the port and the ifname to make sure
* there are no distractions for ifa_ifwithaddr.
*/
/* XXX: broken for IPv6 */
bzero(sin->sin_zero, sizeof(sin->sin_zero));
sin->sin_port = 0;
ifa = ifa_ifwithaddr((struct sockaddr *) sin);
if (ifa == NULL) {
m_freem(m);
return (EADDRNOTAVAIL);
}
m->m_pkthdr.rcvif = ifa->ifa_ifp;
}
#ifdef MAC
mac_socket_create_mbuf(so, m);
#endif
/* Send packet to input processing via netisr */
switch (family) {
case AF_INET:
ip = mtod(m, struct ip *);
/*
* Restore M_BCAST flag when destination address is
* broadcast. It is expected by ip_tryforward().
*/
if (IN_MULTICAST(ntohl(ip->ip_dst.s_addr)))
m->m_flags |= M_MCAST;
else if (in_broadcast(ip->ip_dst, m->m_pkthdr.rcvif))
m->m_flags |= M_BCAST;
netisr_queue_src(NETISR_IP, (uintptr_t)so, m);
break;
#ifdef INET6
case AF_INET6:
netisr_queue_src(NETISR_IPV6, (uintptr_t)so, m);
break;
#endif
default:
m_freem(m);
return (EINVAL);
}
return (0);
}
static int
div_attach(struct socket *so, int proto, struct thread *td)
{
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
KASSERT(inp == NULL, ("div_attach: inp != NULL"));
if (td != NULL) {
error = priv_check(td, PRIV_NETINET_DIVERT);
if (error)
return (error);
}
error = soreserve(so, div_sendspace, div_recvspace);
if (error)
return error;
error = in_pcballoc(so, &V_divcbinfo);
if (error)
return error;
inp = (struct inpcb *)so->so_pcb;
inp->inp_ip_p = proto;
inp->inp_vflag |= INP_IPV4;
inp->inp_flags |= INP_HDRINCL;
INP_WUNLOCK(inp);
return 0;
}
static void
div_detach(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("div_detach: inp == NULL"));
INP_WLOCK(inp);
in_pcbdetach(inp);
in_pcbfree(inp);
}
static int
div_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
{
struct inpcb *inp;
int error;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("div_bind: inp == NULL"));
/* in_pcbbind assumes that nam is a sockaddr_in
* and in_pcbbind requires a valid address. Since divert
* sockets don't we need to make sure the address is
* filled in properly.
* XXX -- divert should not be abusing in_pcbind
* and should probably have its own family.
*/
if (nam->sa_family != AF_INET)
return EAFNOSUPPORT;
if (nam->sa_len != sizeof(struct sockaddr_in))
return EINVAL;
((struct sockaddr_in *)nam)->sin_addr.s_addr = INADDR_ANY;
INP_WLOCK(inp);
INP_HASH_WLOCK(&V_divcbinfo);
error = in_pcbbind(inp, nam, td->td_ucred);
INP_HASH_WUNLOCK(&V_divcbinfo);
INP_WUNLOCK(inp);
return error;
}
static int
div_shutdown(struct socket *so)
{
struct inpcb *inp;
inp = sotoinpcb(so);
KASSERT(inp != NULL, ("div_shutdown: inp == NULL"));
INP_WLOCK(inp);
socantsendmore(so);
INP_WUNLOCK(inp);
return 0;
}
static int
div_send(struct socket *so, int flags, struct mbuf *m, struct sockaddr *nam,
struct mbuf *control, struct thread *td)
{
/* Packet must have a header (but that's about it) */
if (m->m_len < sizeof (struct ip) &&
(m = m_pullup(m, sizeof (struct ip))) == NULL) {
KMOD_IPSTAT_INC(ips_toosmall);
if (control != NULL)
m_freem(control);
m_freem(m);
return EINVAL;
}
/* Send packet */
return div_output(so, m, (struct sockaddr_in *)nam, control);
}
static int
div_pcblist(SYSCTL_HANDLER_ARGS)
{
struct inpcb_iterator inpi = INP_ALL_ITERATOR(&V_divcbinfo,
INPLOOKUP_RLOCKPCB);
struct xinpgen xig;
struct inpcb *inp;
int error;
if (req->newptr != 0)
return EPERM;
if (req->oldptr == 0) {
int n;
n = V_divcbinfo.ipi_count;
n += imax(n / 8, 10);
req->oldidx = 2 * (sizeof xig) + n * sizeof(struct xinpcb);
return 0;
}
if ((error = sysctl_wire_old_buffer(req, 0)) != 0)
return (error);
bzero(&xig, sizeof(xig));
xig.xig_len = sizeof xig;
xig.xig_count = V_divcbinfo.ipi_count;
xig.xig_gen = V_divcbinfo.ipi_gencnt;
xig.xig_sogen = so_gencnt;
error = SYSCTL_OUT(req, &xig, sizeof xig);
if (error)
return error;
while ((inp = inp_next(&inpi)) != NULL) {
if (inp->inp_gencnt <= xig.xig_gen) {
struct xinpcb xi;
in_pcbtoxinpcb(inp, &xi);
error = SYSCTL_OUT(req, &xi, sizeof xi);
if (error) {
INP_RUNLOCK(inp);
break;
}
}
}
if (!error) {
/*
* Give the user an updated idea of our state.
* If the generation differs from what we told
* her before, she knows that something happened
* while we were processing this request, and it
* might be necessary to retry.
*/
xig.xig_gen = V_divcbinfo.ipi_gencnt;
xig.xig_sogen = so_gencnt;
xig.xig_count = V_divcbinfo.ipi_count;
error = SYSCTL_OUT(req, &xig, sizeof xig);
}
return (error);
}
#ifdef SYSCTL_NODE
static SYSCTL_NODE(_net_inet, IPPROTO_DIVERT, divert,
CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
"IPDIVERT");
SYSCTL_PROC(_net_inet_divert, OID_AUTO, pcblist,
CTLTYPE_OPAQUE | CTLFLAG_RD | CTLFLAG_MPSAFE,
NULL, 0, div_pcblist, "S,xinpcb",
"List of active divert sockets");
#endif
struct pr_usrreqs div_usrreqs = {
.pru_attach = div_attach,
.pru_bind = div_bind,
.pru_control = in_control,
.pru_detach = div_detach,
.pru_peeraddr = in_getpeeraddr,
.pru_send = div_send,
.pru_shutdown = div_shutdown,
.pru_sockaddr = in_getsockaddr,
.pru_sosetlabel = in_pcbsosetlabel
};
struct protosw div_protosw = {
.pr_type = SOCK_RAW,
.pr_protocol = IPPROTO_DIVERT,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = div_input,
.pr_usrreqs = &div_usrreqs
};
static int
div_modevent(module_t mod, int type, void *unused)
{
int err = 0;
switch (type) {
case MOD_LOAD:
/*
* Protocol will be initialized by pf_proto_register().
* We don't have to register ip_protox because we are not
* a true IP protocol that goes over the wire.
*/
err = pf_proto_register(PF_INET, &div_protosw);
if (err != 0)
return (err);
ip_divert_ptr = divert_packet;
break;
case MOD_QUIESCE:
/*
* IPDIVERT may normally not be unloaded because of the
* potential race conditions. Tell kldunload we can't be
* unloaded unless the unload is forced.
*/
err = EPERM;
break;
case MOD_UNLOAD:
/*
* Forced unload.
*
* Module ipdivert can only be unloaded if no sockets are
* connected. Maybe this can be changed later to forcefully
* disconnect any open sockets.
*
* XXXRW: Note that there is a slight race here, as a new
* socket open request could be spinning on the lock and then
* we destroy the lock.
*/
INP_INFO_WLOCK(&V_divcbinfo);
if (V_divcbinfo.ipi_count != 0) {
err = EBUSY;
INP_INFO_WUNLOCK(&V_divcbinfo);
break;
}
ip_divert_ptr = NULL;
err = pf_proto_unregister(PF_INET, IPPROTO_DIVERT, SOCK_RAW);
INP_INFO_WUNLOCK(&V_divcbinfo);
#ifndef VIMAGE
div_destroy(NULL);
#endif
break;
default:
err = EOPNOTSUPP;
break;
}
return err;
}
static moduledata_t ipdivertmod = {
"ipdivert",
div_modevent,
0
};
DECLARE_MODULE(ipdivert, ipdivertmod, SI_SUB_PROTO_FIREWALL, SI_ORDER_ANY);
MODULE_DEPEND(ipdivert, ipfw, 3, 3, 3);
MODULE_VERSION(ipdivert, 1);