d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6682323732
freebsd-dev/sys/dev/usb/net/if_mugereg.h
Ed Maste 03dec17347 muge: update FDT LED configuration 
Also use LED mode settings from the FDT to set the PHY.
From v3 of the patch submitted in the PR.

I moved the sc_led_modes and sc_led_modes_mask default setting outside
of the #ifdef FDT case.

PR:		237325
Submitted by:	Ralf <iz-rpi03@hs-karlsruhe.de>
Reviewed by:	ian
MFC after:	2 weeks
MFC with:	r348001
Event:		Waterloo Hackathon 2019
Differential Revision:	https://reviews.freebsd.org/D20325
2019-05-20 19:31:49 +00:00

379 lines
12 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (C) 2018 The FreeBSD Foundation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Definitions for the Microchip LAN78xx USB-to-Ethernet controllers.
*
* This information was mostly taken from the LAN7800 manual, but some
* undocumented registers are based on the Linux driver.
*
*/
#ifndef _IF_MUGEREG_H_
#define _IF_MUGEREG_H_
/* USB Vendor Requests */
#define UVR_WRITE_REG 0xA0
#define UVR_READ_REG 0xA1
#define UVR_GET_STATS 0xA2
/* Device ID and revision register */
#define ETH_ID_REV 0x000
#define ETH_ID_REV_CHIP_ID_MASK_ 0xFFFF0000UL
#define ETH_ID_REV_CHIP_REV_MASK_ 0x0000FFFFUL
#define ETH_ID_REV_CHIP_ID_7800_ 0x7800
#define ETH_ID_REV_CHIP_ID_7801_ 0x7801
#define ETH_ID_REV_CHIP_ID_7850_ 0x7850
/* Device interrupt status register. */
#define ETH_INT_STS 0x00C
#define ETH_INT_STS_CLEAR_ALL_ 0xFFFFFFFFUL
/* Hardware Configuration Register. */
#define ETH_HW_CFG 0x010
#define ETH_HW_CFG_LED3_EN_ (0x1UL << 23)
#define ETH_HW_CFG_LED2_EN_ (0x1UL << 22)
#define ETH_HW_CFG_LED1_EN_ (0x1UL << 21)
#define ETH_HW_CFG_LEDO_EN_ (0x1UL << 20)
#define ETH_HW_CFG_MEF_ (0x1UL << 4)
#define ETH_HW_CFG_ETC_ (0x1UL << 3)
#define ETH_HW_CFG_LRST_ (0x1UL << 1) /* Lite reset */
#define ETH_HW_CFG_SRST_ (0x1UL << 0) /* Soft reset */
/* Power Management Control Register. */
#define ETH_PMT_CTL 0x014
#define ETH_PMT_CTL_PHY_RST_ (0x1UL << 4) /* PHY reset */
#define ETH_PMT_CTL_WOL_EN_ (0x1UL << 3) /* PHY wake-on-lan */
#define ETH_PMT_CTL_PHY_WAKE_EN_ (0x1UL << 2) /* PHY int wake */
/* GPIO Configuration 0 Register. */
#define ETH_GPIO_CFG0 0x018
/* GPIO Configuration 1 Register. */
#define ETH_GPIO_CFG1 0x01C
/* GPIO wake enable and polarity register. */
#define ETH_GPIO_WAKE 0x020
/* RX Command A */
#define RX_CMD_A_RED_ (0x1UL << 22) /* Receive Error Det */
#define RX_CMD_A_ICSM_ (0x1UL << 14)
#define RX_CMD_A_LEN_MASK_ 0x00003FFFUL
/* TX Command A */
#define TX_CMD_A_LEN_MASK_ 0x000FFFFFUL
#define TX_CMD_A_FCS_ (0x1UL << 22)
/* Data Port Select Register */
#define ETH_DP_SEL 0x024
#define ETH_DP_SEL_DPRDY_ (0x1UL << 31)
#define ETH_DP_SEL_RSEL_VLAN_DA_ (0x1UL << 0) /* RFE VLAN/DA Hash */
#define ETH_DP_SEL_RSEL_MASK_ 0x0000000F
#define ETH_DP_SEL_VHF_HASH_LEN 16
#define ETH_DP_SEL_VHF_VLAN_LEN 128
/* Data Port Command Register */
#define ETH_DP_CMD 0x028
#define ETH_DP_CMD_WRITE_ (0x1UL << 0) /* 1 for write */
#define ETH_DP_CMD_READ_ (0x0UL << 0) /* 0 for read */
/* Data Port Address Register */
#define ETH_DP_ADDR 0x02C
/* Data Port Data Register */
#define ETH_DP_DATA 0x030
/* EEPROM Command Register */
#define ETH_E2P_CMD 0x040
#define ETH_E2P_CMD_MASK_ 0x70000000UL
#define ETH_E2P_CMD_ADDR_MASK_ 0x000001FFUL
#define ETH_E2P_CMD_BUSY_ (0x1UL << 31)
#define ETH_E2P_CMD_READ_ (0x0UL << 28)
#define ETH_E2P_CMD_WRITE_ (0x3UL << 28)
#define ETH_E2P_CMD_ERASE_ (0x5UL << 28)
#define ETH_E2P_CMD_RELOAD_ (0x7UL << 28)
#define ETH_E2P_CMD_TIMEOUT_ (0x1UL << 10)
#define ETH_E2P_MAC_OFFSET 0x01
#define ETH_E2P_INDICATOR_OFFSET 0x00
/* EEPROM Data Register */
#define ETH_E2P_DATA 0x044
#define ETH_E2P_INDICATOR 0xA5 /* EEPROM is present */
/* Packet sizes. */
#define MUGE_SS_USB_PKT_SIZE 1024
#define MUGE_HS_USB_PKT_SIZE 512
#define MUGE_FS_USB_PKT_SIZE 64
/* Receive Filtering Engine Control Register */
#define ETH_RFE_CTL 0x0B0
#define ETH_RFE_CTL_IGMP_COE_ (0x1U << 14)
#define ETH_RFE_CTL_ICMP_COE_ (0x1U << 13)
#define ETH_RFE_CTL_TCPUDP_COE_ (0x1U << 12)
#define ETH_RFE_CTL_IP_COE_ (0x1U << 11)
#define ETH_RFE_CTL_BCAST_EN_ (0x1U << 10)
#define ETH_RFE_CTL_MCAST_EN_ (0x1U << 9)
#define ETH_RFE_CTL_UCAST_EN_ (0x1U << 8)
#define ETH_RFE_CTL_VLAN_FILTER_ (0x1U << 5)
#define ETH_RFE_CTL_MCAST_HASH_ (0x1U << 3)
#define ETH_RFE_CTL_DA_PERFECT_ (0x1U << 1)
/* End address of the RX FIFO */
#define ETH_FCT_RX_FIFO_END 0x0C8
#define ETH_FCT_RX_FIFO_END_MASK_ 0x0000007FUL
#define MUGE_MAX_RX_FIFO_SIZE (12 * 1024)
/* End address of the TX FIFO */
#define ETH_FCT_TX_FIFO_END 0x0CC
#define ETH_FCT_TX_FIFO_END_MASK_ 0x0000003FUL
#define MUGE_MAX_TX_FIFO_SIZE (12 * 1024)
/* USB Configuration Register 0 */
#define ETH_USB_CFG0 0x080
#define ETH_USB_CFG_BIR_ (0x1U << 6) /* Bulk-In Empty resp */
#define ETH_USB_CFG_BCE_ (0x1U << 5) /* Burst Cap Enable */
/* USB Configuration Register 1 */
#define ETH_USB_CFG1 0x084
/* USB Configuration Register 2 */
#define ETH_USB_CFG2 0x088
/* USB bConfigIndex: it only has one configuration. */
#define MUGE_CONFIG_INDEX 0
/* Burst Cap Register */
#define ETH_BURST_CAP 0x090
#define MUGE_DEFAULT_BURST_CAP_SIZE MUGE_MAX_TX_FIFO_SIZE
/* Bulk-In Delay Register */
#define ETH_BULK_IN_DLY 0x094
#define MUGE_DEFAULT_BULK_IN_DELAY 0x0800
/* Interrupt Endpoint Control Register */
#define ETH_INT_EP_CTL 0x098
#define ETH_INT_ENP_PHY_INT (0x1U << 17) /* PHY Enable */
/* Registers on the phy, accessed via MII/MDIO */
#define MUGE_PHY_INTR_STAT 25
#define MUGE_PHY_INTR_MASK 26
#define MUGE_PHY_INTR_LINK_CHANGE (0x1U << 13)
#define MUGE_PHY_INTR_ANEG_COMP (0x1U << 10)
#define MUGE_EXT_PAGE_ACCESS 0x1F
#define MUGE_EXT_PAGE_SPACE_0 0x0000
#define MUGE_EXT_PAGE_SPACE_1 0x0001
#define MUGE_EXT_PAGE_SPACE_2 0x0002
#define MUGE_PHY_LED_MODE 29
/* Extended Register Page 1 Space */
#define MUGE_EXT_MODE_CTRL 0x0013
#define MUGE_EXT_MODE_CTRL_MDIX_MASK_ 0x000C
#define MUGE_EXT_MODE_CTRL_AUTO_MDIX_ 0x0000
/* FCT Flow Control Threshold Register */
#define ETH_FCT_FLOW 0x0D0
/* FCT RX FIFO Control Register */
#define ETH_FCT_RX_CTL 0x0C0
/* FCT TX FIFO Control Register */
#define ETH_FCT_TX_CTL 0x0C4
#define ETH_FCT_TX_CTL_EN_ (0x1U << 31)
/* MAC Control Register */
#define ETH_MAC_CR 0x100
#define ETH_MAC_CR_GMII_EN_ (0x1U << 19) /* GMII Enable */
#define ETH_MAC_CR_AUTO_DUPLEX_ (0x1U << 12)
#define ETH_MAC_CR_AUTO_SPEED_ (0x1U << 11)
/* MAC Receive Register */
#define ETH_MAC_RX 0x104
#define ETH_MAC_RX_MAX_FR_SIZE_MASK_ 0x3FFF0000
#define ETH_MAC_RX_MAX_FR_SIZE_SHIFT_ 16
#define ETH_MAC_RX_EN_ (0x1U << 0) /* Enable Receiver */
/* MAC Transmit Register */
#define ETH_MAC_TX 0x108
#define ETH_MAC_TX_TXEN_ (0x1U << 0) /* Enable Transmitter */
/* Flow Control Register */
#define ETH_FLOW 0x10C
#define ETH_FLOW_CR_TX_FCEN_ (0x1U << 30) /* TX FC Enable */
#define ETH_FLOW_CR_RX_FCEN_ (0x1U << 29) /* RX FC Enable */
/* MAC Receive Address Registers */
#define ETH_RX_ADDRH 0x118 /* High */
#define ETH_RX_ADDRL 0x11C /* Low */
/* MII Access Register */
#define ETH_MII_ACC 0x120
#define ETH_MII_ACC_MII_BUSY_ (0x1UL << 0)
#define ETH_MII_ACC_MII_READ_ (0x0UL << 1)
#define ETH_MII_ACC_MII_WRITE_ (0x1UL << 1)
/* MII Data Register */
#define ETH_MII_DATA 0x124
/* MAC address perfect filter registers (ADDR_FILTx) */
#define ETH_MAF_BASE 0x400
#define ETH_MAF_HIx 0x00
#define ETH_MAF_LOx 0x04
#define MUGE_NUM_PFILTER_ADDRS_ 33
#define ETH_MAF_HI_VALID_ (0x1UL << 31)
#define ETH_MAF_HI_TYPE_SRC_ (0x1UL << 30)
#define ETH_MAF_HI_TYPE_DST_ (0x0UL << 30)
#define PFILTER_HI(index) (ETH_MAF_BASE + (8 * (index)) + (ETH_MAF_HIx))
#define PFILTER_LO(index) (ETH_MAF_BASE + (8 * (index)) + (ETH_MAF_LOx))
/*
* These registers are not documented in the datasheet, and are based on
* the Linux driver.
*/
#define OTP_BASE_ADDR 0x01000
#define OTP_PWR_DN (OTP_BASE_ADDR + 4 * 0x00)
#define OTP_PWR_DN_PWRDN_N 0x01
#define OTP_ADDR1 (OTP_BASE_ADDR + 4 * 0x01)
#define OTP_ADDR1_15_11 0x1F
#define OTP_ADDR2 (OTP_BASE_ADDR + 4 * 0x02)
#define OTP_ADDR2_10_3 0xFF
#define OTP_ADDR3 (OTP_BASE_ADDR + 4 * 0x03)
#define OTP_ADDR3_2_0 0x03
#define OTP_RD_DATA (OTP_BASE_ADDR + 4 * 0x06)
#define OTP_FUNC_CMD (OTP_BASE_ADDR + 4 * 0x08)
#define OTP_FUNC_CMD_RESET 0x04
#define OTP_FUNC_CMD_PROGRAM_ 0x02
#define OTP_FUNC_CMD_READ_ 0x01
#define OTP_MAC_OFFSET 0x01
#define OTP_INDICATOR_OFFSET 0x00
#define OTP_INDICATOR_1 0xF3
#define OTP_INDICATOR_2 0xF7
#define OTP_CMD_GO (OTP_BASE_ADDR + 4 * 0x0A)
#define OTP_CMD_GO_GO_ 0x01
#define OTP_STATUS (OTP_BASE_ADDR + 4 * 0x0A)
#define OTP_STATUS_OTP_LOCK_ 0x10
#define OTP_STATUS_BUSY_ 0x01
/* Some unused registers, from the data sheet. */
#if 0
#define ETH_BOS_ATTR 0x050
#define ETH_SS_ATTR 0x054
#define ETH_HS_ATTR 0x058
#define ETH_FS_ATTR 0x05C
#define ETH_STRNG_ATTR0 0x060
#define ETH_STRNG_ATTR1 0x064
#define ETH_STRNGFLAG_ATTR 0x068
#define ETH_SW_GP_0 0x06C
#define ETH_SW_GP_1 0x070
#define ETH_SW_GP_2 0x074
#define ETH_VLAN_TYPE 0x0B4
#define ETH_RX_DP_STOR 0x0D4
#define ETH_TX_DP_STOR 0x0D8
#define ETH_LTM_BELT_IDLE0 0x0E0
#define ETH_LTM_BELT_IDLE1 0x0E4
#define ETH_LTM_BELT_ACT0 0x0E8
#define ETH_LTM_BELT_ACT1 0x0EC
#define ETH_LTM_INACTIVE0 0x0F0
#define ETH_LTM_INACTIVE1 0x0F4
#define ETH_RAND_SEED 0x110
#define ETH_ERR_STS 0x114
#define ETH_EEE_TX_LPI_REQ_DLY 0x130
#define ETH_EEE_TW_TX_SYS 0x134
#define ETH_EEE_TX_LPI_REM_DLY 0x138
#define ETH_WUCSR1 0x140
#define ETH_WK_SRC 0x144
#define ETH_WUF_CFGx 0x150
#define ETH_WUF_MASKx 0x200
#define ETH_WUCSR2 0x600
#define ETH_NS1_IPV6_ADDR_DEST0 0x610
#define ETH_NS1_IPV6_ADDR_DEST1 0x614
#define ETH_NS1_IPV6_ADDR_DEST2 0x618
#define ETH_NS1_IPV6_ADDR_DEST3 0x61C
#define ETH_NS1_IPV6_ADDR_SRC0 0x620
#define ETH_NS1_IPV6_ADDR_SRC1 0x624
#define ETH_NS1_IPV6_ADDR_SRC2 0x628
#define ETH_NS1_IPV6_ADDR_SRC3 0x62C
#define ETH_NS1_ICMPV6_ADDR0_0 0x630
#define ETH_NS1_ICMPV6_ADDR0_1 0x634
#define ETH_NS1_ICMPV6_ADDR0_2 0x638
#define ETH_NS1_ICMPV6_ADDR0_3 0x63C
#define ETH_NS1_ICMPV6_ADDR1_0 0x640
#define ETH_NS1_ICMPV6_ADDR1_1 0x644
#define ETH_NS1_ICMPV6_ADDR1_2 0x648
#define ETH_NS1_ICMPV6_ADDR1_3 0x64C
#define ETH_NS2_IPV6_ADDR_DEST0 0x650
#define ETH_NS2_IPV6_ADDR_DEST1 0x654
#define ETH_NS2_IPV6_ADDR_DEST2 0x658
#define ETH_NS2_IPV6_ADDR_DEST3 0x65C
#define ETH_NS2_IPV6_ADDR_SRC0 0x660
#define ETH_NS2_IPV6_ADDR_SRC1 0x664
#define ETH_NS2_IPV6_ADDR_SRC2 0x668
#define ETH_NS2_IPV6_ADDR_SRC3 0x66C
#define ETH_NS2_ICMPV6_ADDR0_0 0x670
#define ETH_NS2_ICMPV6_ADDR0_1 0x674
#define ETH_NS2_ICMPV6_ADDR0_2 0x678
#define ETH_NS2_ICMPV6_ADDR0_3 0x67C
#define ETH_NS2_ICMPV6_ADDR1_0 0x680
#define ETH_NS2_ICMPV6_ADDR1_1 0x684
#define ETH_NS2_ICMPV6_ADDR1_2 0x688
#define ETH_NS2_ICMPV6_ADDR1_3 0x68C
#define ETH_SYN_IPV4_ADDR_SRC 0x690
#define ETH_SYN_IPV4_ADDR_DEST 0x694
#define ETH_SYN_IPV4_TCP_PORTS 0x698
#define ETH_SYN_IPV6_ADDR_SRC0 0x69C
#define ETH_SYN_IPV6_ADDR_SRC1 0x6A0
#define ETH_SYN_IPV6_ADDR_SRC2 0x6A4
#define ETH_SYN_IPV6_ADDR_SRC3 0x6A8
#define ETH_SYN_IPV6_ADDR_DEST0 0x6AC
#define ETH_SYN_IPV6_ADDR_DEST1 0x6B0
#define ETH_SYN_IPV6_ADDR_DEST2 0x6B4
#define ETH_SYN_IPV6_ADDR_DEST3 0x6B8
#define ETH_SYN_IPV6_TCP_PORTS 0x6BC
#define ETH_ARP_SPA 0x6C0
#define ETH_ARP_TPA 0x6C4
#define ETH_PHY_DEV_ID 0x700
#endif
#endif /* _IF_MUGEREG_H_ */
Reference in New Issue View Git Blame Copy Permalink