Adrian Chadd f1ff114882 Export the per-chain ctl/ext noise floor values, raw and uncut, to the ... upper-level HAL. Right now the per-chain noise floor values aren't used anywhere in the upper-level HAL, so the driver currently has no real reference to compare the per-chain RSSI values to. This is needed before per-chain RSSI values (for ctl and ext radios) are can be thrown upstairs to the net80211 code.		2011-04-08 06:58:01 +00:00
..
ar2133.c	Add some more debugging	2011-04-02 00:24:13 +00:00
ar5416_ani.c	The AR5416+ chips all have MIB counters (which the AR5416 ANI code assumes)	2011-03-23 03:58:55 +00:00
ar5416_attach.c	Add a HAL capability bit for supporting self-linked RX descriptors and disable it for the 11n chipsets.	2011-04-04 14:52:31 +00:00
ar5416_beacon.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_adcdc.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_adcgain.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_iq.c	Fix the calibration logic to correctly clamp the calculated coefficient.	2010-08-14 15:28:15 +00:00
ar5416_cal.c	Export the per-chain ctl/ext noise floor values, raw and uncut, to the	2011-04-08 06:58:01 +00:00
ar5416_cal.h	Introduce methods for the initial calibration and the new PA calibration	2011-03-11 11:35:36 +00:00
ar5416_eeprom.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_gpio.c	Add support for the AR9285 chipset, which is found on many netbooks	2010-01-29 10:10:14 +00:00
ar5416_interrupts.c	Introduce AH_AR5416_INTERRUPT_MITIGATION which enables interrupt mitigation for	2011-03-31 08:48:05 +00:00
ar5416_keycache.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_misc.c	At least set the coverage class value here; worry about populating the	2011-04-04 11:01:53 +00:00
ar5416_phy.c	Modify the AR5416 11na rate table to use 24mb OFDM 11a for control traffic,	2011-02-21 05:10:34 +00:00
ar5416_power.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:02:50 +00:00
ar5416_recv.c	Add a HAL capability bit for supporting self-linked RX descriptors and disable it for the 11n chipsets.	2011-04-04 14:52:31 +00:00
ar5416_reset.c	Import a fix from the ath9k - reduce the TX FIFO size for Kite (AR9285.)	2011-04-03 12:02:49 +00:00
ar5416_xmit.c	Bring over a few queue changes from ath9k:	2011-03-22 00:14:17 +00:00
ar5416.h	I missed committing this last time - it's needed for the 5ghz fast clock calculation.	2011-04-03 20:15:41 +00:00
ar5416.ini	Bring over ar5416 inivals from Linux-2.6.34.	2010-08-10 07:48:13 +00:00
ar5416desc.h	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416phy.h	Add in some AR9280 specific board configuration options.	2011-02-07 22:00:31 +00:00
ar5416reg.h	The right commit - add a couple more AR_PCU_MISC_MODE2 register bits -	2011-03-25 00:06:58 +00:00