freebsd-dev/sys/mips/ingenic/jz4780_nemc.c
Ruslan Bukin 9a8f61fb5b Bring in support for Ingenic XBurst JZ4780 and
X1000 systems on chips.

Imgtec CI20 and Ingenic CANNA boards supported.

Submitted by:	Alexander Kabaev <kan@FreeBSD.org>
Reviewed by:	Ruslan Bukin <br@FreeBSD.org>
Sponsored by:	DARPA, AFRL
2016-11-19 17:46:18 +00:00

374 lines
10 KiB
C

/*-
* Copyright 2015 Alexander Kabaev <kan@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Ingenic JZ4780 NAND and External Memory Controller (NEMC) driver.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <machine/bus.h>
#include <dev/extres/clk/clk.h>
#include <dev/fdt/fdt_common.h>
#include <dev/fdt/simplebus.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <mips/ingenic/jz4780_regs.h>
struct jz4780_nemc_devinfo {
struct simplebus_devinfo sinfo;
uint32_t bank;
};
struct jz4780_nemc_softc {
struct simplebus_softc simplebus_sc;
device_t dev;
struct resource *res[1];
uint32_t banks;
uint32_t clock_tick_psecs;
clk_t clk;
};
static struct resource_spec jz4780_nemc_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ -1, 0 }
};
#define CSR_WRITE_4(sc, reg, val) bus_write_4((sc)->res[0], reg, (val))
#define CSR_READ_4(sc, reg) bus_read_4((sc)->res[0], reg)
static int jz4780_nemc_probe(device_t dev);
static int jz4780_nemc_attach(device_t dev);
static int jz4780_nemc_detach(device_t dev);
static int
jz4780_nemc_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "ingenic,jz4780-nemc"))
return (ENXIO);
device_set_desc(dev, "Ingenic JZ4780 NEMC");
return (BUS_PROBE_DEFAULT);
}
#define JZ4780_NEMC_NS_TO_TICKS(sc, val) howmany((val) * 1000, (sc)->clock_tick_psecs)
/* Use table from JZ4780 programmers manual to convert ticks to tBP/tAW register values */
static const uint8_t ticks_to_tBP_tAW[32] = {
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, /* 1:1 mapping */
11, 11, /* 12 cycles */
12, 12, 12, /* 15 cycles */
13, 13, 13, 13, 13, /* 20 cycles */
14, 14, 14, 14, 14, /* 25 cycles */
15, 15, 15, 15, 15, 15 /* 31 cycles */
};
static int
jz4780_nemc_configure_bank(struct jz4780_nemc_softc *sc,
device_t dev, u_int bank)
{
uint32_t smcr, cycles;
phandle_t node;
pcell_t val;
/* Check if bank is configured already */
if (sc->banks & (1 << bank))
return 0;
smcr = CSR_READ_4(sc, JZ_NEMC_SMCR(bank));
smcr &= ~JZ_NEMC_SMCR_SMT_MASK;
smcr |= JZ_NEMC_SMCR_SMT_NORMAL << JZ_NEMC_SMCR_SMT_SHIFT;
node = ofw_bus_get_node(dev);
if (OF_getencprop(node, "ingenic,nemc-tAS", &val, sizeof(val)) > 0) {
cycles = JZ4780_NEMC_NS_TO_TICKS(sc, val);
if (cycles > 15) {
device_printf(sc->dev,
"invalid value of %s %u (%u cycles), maximum %u cycles supported\n",
"ingenic,nemc-tAS", val, cycles, 15);
return -1;
}
smcr &= ~JZ_NEMC_SMCR_TAS_MASK;
smcr |= cycles << JZ_NEMC_SMCR_TAS_SHIFT;
}
if (OF_getencprop(node, "ingenic,nemc-tAH", &val, sizeof(val)) > 0) {
cycles = JZ4780_NEMC_NS_TO_TICKS(sc, val);
if (cycles > 15) {
device_printf(sc->dev,
"invalid value of %s %u (%u cycles), maximum %u cycles supported\n",
"ingenic,nemc-tAH", val, cycles, 15);
return -1;
}
smcr &= ~JZ_NEMC_SMCR_TAH_MASK;
smcr |= cycles << JZ_NEMC_SMCR_TAH_SHIFT;
}
if (OF_getencprop(node, "ingenic,nemc-tBP", &val, sizeof(val)) > 0) {
cycles = JZ4780_NEMC_NS_TO_TICKS(sc, val);
if (cycles > 31) {
device_printf(sc->dev,
"invalid value of %s %u (%u cycles), maximum %u cycles supported\n",
"ingenic,nemc-tBP", val, cycles, 15);
return -1;
}
smcr &= ~JZ_NEMC_SMCR_TBP_MASK;
smcr |= ticks_to_tBP_tAW[cycles] << JZ_NEMC_SMCR_TBP_SHIFT;
}
if (OF_getencprop(node, "ingenic,nemc-tAW", &val, sizeof(val)) > 0) {
cycles = JZ4780_NEMC_NS_TO_TICKS(sc, val);
if (cycles > 31) {
device_printf(sc->dev,
"invalid value of %s %u (%u cycles), maximum %u cycles supported\n",
"ingenic,nemc-tAW", val, cycles, 15);
return -1;
}
smcr &= ~JZ_NEMC_SMCR_TAW_MASK;
smcr |= ticks_to_tBP_tAW[cycles] << JZ_NEMC_SMCR_TAW_SHIFT;
}
if (OF_getencprop(node, "ingenic,nemc-tSTRV", &val, sizeof(val)) > 0) {
cycles = JZ4780_NEMC_NS_TO_TICKS(sc, val);
if (cycles > 63) {
device_printf(sc->dev,
"invalid value of %s %u (%u cycles), maximum %u cycles supported\n",
"ingenic,nemc-tSTRV", val, cycles, 15);
return -1;
}
smcr &= ~JZ_NEMC_SMCR_STRV_MASK;
smcr |= cycles << JZ_NEMC_SMCR_STRV_SHIFT;
}
CSR_WRITE_4(sc, JZ_NEMC_SMCR(bank), smcr);
sc->banks |= (1 << bank);
return 0;
}
/* Wholesale copy of simplebus routine */
static int
jz4780_nemc_fill_ranges(phandle_t node, struct simplebus_softc *sc)
{
int host_address_cells;
cell_t *base_ranges;
ssize_t nbase_ranges;
int err;
int i, j, k;
err = OF_searchencprop(OF_parent(node), "#address-cells",
&host_address_cells, sizeof(host_address_cells));
if (err <= 0)
return (-1);
nbase_ranges = OF_getproplen(node, "ranges");
if (nbase_ranges < 0)
return (-1);
sc->nranges = nbase_ranges / sizeof(cell_t) /
(sc->acells + host_address_cells + sc->scells);
if (sc->nranges == 0)
return (0);
sc->ranges = malloc(sc->nranges * sizeof(sc->ranges[0]),
M_DEVBUF, M_WAITOK);
base_ranges = malloc(nbase_ranges, M_DEVBUF, M_WAITOK);
OF_getencprop(node, "ranges", base_ranges, nbase_ranges);
for (i = 0, j = 0; i < sc->nranges; i++) {
sc->ranges[i].bus = 0;
for (k = 0; k < sc->acells; k++) {
sc->ranges[i].bus <<= 32;
sc->ranges[i].bus |= base_ranges[j++];
}
sc->ranges[i].host = 0;
for (k = 0; k < host_address_cells; k++) {
sc->ranges[i].host <<= 32;
sc->ranges[i].host |= base_ranges[j++];
}
sc->ranges[i].size = 0;
for (k = 0; k < sc->scells; k++) {
sc->ranges[i].size <<= 32;
sc->ranges[i].size |= base_ranges[j++];
}
}
free(base_ranges, M_DEVBUF);
return (sc->nranges);
}
static int
jz4780_nemc_attach(device_t dev)
{
struct jz4780_nemc_softc *sc = device_get_softc(dev);
phandle_t node;
uint64_t freq;
sc->dev = dev;
if (bus_alloc_resources(dev, jz4780_nemc_spec, sc->res)) {
device_printf(dev, "could not allocate resources for device\n");
return (ENXIO);
}
node = ofw_bus_get_node(dev);
/* Initialize simplebus and enumerate resources */
simplebus_init(dev, node);
if (jz4780_nemc_fill_ranges(node, &sc->simplebus_sc) < 0)
goto error;
/* Figure our underlying clock rate. */
if (clk_get_by_ofw_index(dev, 0, 0, &sc->clk) != 0) {
device_printf(dev, "could not lookup device clock\n");
goto error;
}
if (clk_enable(sc->clk) != 0) {
device_printf(dev, "could not enable device clock\n");
goto error;
}
if (clk_get_freq(sc->clk, &freq) != 0) {
device_printf(dev, "could not determine clock speed\n");
goto error;
}
/* Convert clock frequency to picoseconds-per-tick value. */
sc->clock_tick_psecs = (uint32_t)(1000000000000ULL / freq);
/*
* Allow devices to identify.
*/
bus_generic_probe(dev);
/*
* Now walk the tree and attach top level devices
*/
for (node = OF_child(node); node > 0; node = OF_peer(node))
simplebus_add_device(dev, node, 0, NULL, -1, NULL);
return (bus_generic_attach(dev));
error:
jz4780_nemc_detach(dev);
return (ENXIO);
}
static int
jz4780_nemc_detach(device_t dev)
{
struct jz4780_nemc_softc *sc = device_get_softc(dev);
bus_generic_detach(dev);
if (sc->clk != NULL)
clk_release(sc->clk);
bus_release_resources(dev, jz4780_nemc_spec, sc->res);
return (0);
}
static int
jz4780_nemc_decode_bank(struct simplebus_softc *sc, struct resource *r,
u_int *bank)
{
rman_res_t start, end;
int i;
start = rman_get_start(r);
end = rman_get_end(r);
/* Remap through ranges property */
for (i = 0; i < sc->nranges; i++) {
if (start >= sc->ranges[i].host && end <
sc->ranges[i].host + sc->ranges[i].size) {
*bank = (sc->ranges[i].bus >> 32);
return (0);
}
}
return (1);
}
static int
jz4780_nemc_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
struct jz4780_nemc_softc *sc;
u_int bank;
int err;
if (type == SYS_RES_MEMORY) {
sc = device_get_softc(bus);
/* Figure out on what bank device is residing */
err = jz4780_nemc_decode_bank(&sc->simplebus_sc, r, &bank);
if (err == 0) {
/* Attempt to configure the bank if not done already */
err = jz4780_nemc_configure_bank(sc, child, bank);
if (err != 0)
return (err);
}
}
/* Call default implementation to finish the work */
return (bus_generic_activate_resource(bus, child,
type, rid, r));
}
static device_method_t jz4780_nemc_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, jz4780_nemc_probe),
DEVMETHOD(device_attach, jz4780_nemc_attach),
DEVMETHOD(device_detach, jz4780_nemc_detach),
/* Overrides to configure bank on resource activation */
DEVMETHOD(bus_activate_resource, jz4780_nemc_activate_resource),
DEVMETHOD_END
};
static devclass_t jz4780_nemc_devclass;
DEFINE_CLASS_1(nemc, jz4780_nemc_driver, jz4780_nemc_methods,
sizeof(struct jz4780_nemc_softc), simplebus_driver);
DRIVER_MODULE(jz4780_nemc, simplebus, jz4780_nemc_driver,
jz4780_nemc_devclass, 0, 0);