d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
674074da06
freebsd-dev/sys/dev/etherswitch/arswitch/arswitch_8327.c
Rui Paulo efce3748f3 Revert r268543. 
We should probably fix sys/gpio.h instead.
2014-07-12 06:23:42 +00:00

838 lines
21 KiB
C
Raw Blame History

/*-
* Copyright (c) 2011-2012 Stefan Bethke.
* Copyright (c) 2014 Adrian Chadd.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/errno.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <machine/bus.h>
#include <dev/iicbus/iic.h>
#include <dev/iicbus/iiconf.h>
#include <dev/iicbus/iicbus.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/etherswitch/mdio.h>
#include <dev/etherswitch/etherswitch.h>
#include <dev/etherswitch/arswitch/arswitchreg.h>
#include <dev/etherswitch/arswitch/arswitchvar.h>
#include <dev/etherswitch/arswitch/arswitch_reg.h>
#include <dev/etherswitch/arswitch/arswitch_8327.h>
#include "mdio_if.h"
#include "miibus_if.h"
#include "etherswitch_if.h"
static void
ar8327_phy_fixup(struct arswitch_softc *sc, int phy)
{
switch (sc->chip_rev) {
case 1:
/* For 100M waveform */
arswitch_writedbg(sc->sc_dev, phy, 0, 0x02ea);
/* Turn on Gigabit clock */
arswitch_writedbg(sc->sc_dev, phy, 0x3d, 0x68a0);
break;
case 2:
arswitch_writemmd(sc->sc_dev, phy, 0x7, 0x3c);
arswitch_writemmd(sc->sc_dev, phy, 0x4007, 0x0);
/* fallthrough */
case 4:
arswitch_writemmd(sc->sc_dev, phy, 0x3, 0x800d);
arswitch_writemmd(sc->sc_dev, phy, 0x4003, 0x803f);
arswitch_writedbg(sc->sc_dev, phy, 0x3d, 0x6860);
arswitch_writedbg(sc->sc_dev, phy, 0x5, 0x2c46);
arswitch_writedbg(sc->sc_dev, phy, 0x3c, 0x6000);
break;
}
}
static uint32_t
ar8327_get_pad_cfg(struct ar8327_pad_cfg *cfg)
{
uint32_t t;
if (!cfg)
return (0);
t = 0;
switch (cfg->mode) {
case AR8327_PAD_NC:
break;
case AR8327_PAD_MAC2MAC_MII:
t = AR8327_PAD_MAC_MII_EN;
if (cfg->rxclk_sel)
t |= AR8327_PAD_MAC_MII_RXCLK_SEL;
if (cfg->txclk_sel)
t |= AR8327_PAD_MAC_MII_TXCLK_SEL;
break;
case AR8327_PAD_MAC2MAC_GMII:
t = AR8327_PAD_MAC_GMII_EN;
if (cfg->rxclk_sel)
t |= AR8327_PAD_MAC_GMII_RXCLK_SEL;
if (cfg->txclk_sel)
t |= AR8327_PAD_MAC_GMII_TXCLK_SEL;
break;
case AR8327_PAD_MAC_SGMII:
t = AR8327_PAD_SGMII_EN;
/*
* WAR for the Qualcomm Atheros AP136 board.
* It seems that RGMII TX/RX delay settings needs to be
* applied for SGMII mode as well, The ethernet is not
* reliable without this.
*/
t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
if (cfg->rxclk_delay_en)
t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
if (cfg->txclk_delay_en)
t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
if (cfg->sgmii_delay_en)
t |= AR8327_PAD_SGMII_DELAY_EN;
break;
case AR8327_PAD_MAC2PHY_MII:
t = AR8327_PAD_PHY_MII_EN;
if (cfg->rxclk_sel)
t |= AR8327_PAD_PHY_MII_RXCLK_SEL;
if (cfg->txclk_sel)
t |= AR8327_PAD_PHY_MII_TXCLK_SEL;
break;
case AR8327_PAD_MAC2PHY_GMII:
t = AR8327_PAD_PHY_GMII_EN;
if (cfg->pipe_rxclk_sel)
t |= AR8327_PAD_PHY_GMII_PIPE_RXCLK_SEL;
if (cfg->rxclk_sel)
t |= AR8327_PAD_PHY_GMII_RXCLK_SEL;
if (cfg->txclk_sel)
t |= AR8327_PAD_PHY_GMII_TXCLK_SEL;
break;
case AR8327_PAD_MAC_RGMII:
t = AR8327_PAD_RGMII_EN;
t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
if (cfg->rxclk_delay_en)
t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
if (cfg->txclk_delay_en)
t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
break;
case AR8327_PAD_PHY_GMII:
t = AR8327_PAD_PHYX_GMII_EN;
break;
case AR8327_PAD_PHY_RGMII:
t = AR8327_PAD_PHYX_RGMII_EN;
break;
case AR8327_PAD_PHY_MII:
t = AR8327_PAD_PHYX_MII_EN;
break;
}
return (t);
}
/*
* Map the hard-coded port config from the switch setup to
* the chipset port config (status, duplex, flow, etc.)
*/
static uint32_t
ar8327_get_port_init_status(struct ar8327_port_cfg *cfg)
{
uint32_t t;
if (!cfg->force_link)
return (AR8X16_PORT_STS_LINK_AUTO);
t = AR8X16_PORT_STS_TXMAC | AR8X16_PORT_STS_RXMAC;
t |= cfg->duplex ? AR8X16_PORT_STS_DUPLEX : 0;
t |= cfg->rxpause ? AR8X16_PORT_STS_RXFLOW : 0;
t |= cfg->txpause ? AR8X16_PORT_STS_TXFLOW : 0;
switch (cfg->speed) {
case AR8327_PORT_SPEED_10:
t |= AR8X16_PORT_STS_SPEED_10;
break;
case AR8327_PORT_SPEED_100:
t |= AR8X16_PORT_STS_SPEED_100;
break;
case AR8327_PORT_SPEED_1000:
t |= AR8X16_PORT_STS_SPEED_1000;
break;
}
return (t);
}
/*
* Fetch the port data for the given port.
*
* This goes and does dirty things with the hints space
* to determine what the configuration parameters should be.
*
* Returns 1 if the structure was successfully parsed and
* the contents are valid; 0 otherwise.
*/
static int
ar8327_fetch_pdata_port(struct arswitch_softc *sc,
struct ar8327_port_cfg *pcfg,
int port)
{
int val;
char sbuf[128];
/* Check if force_link exists */
val = 0;
snprintf(sbuf, 128, "port.%d.force_link", port);
(void) resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val);
if (val != 1)
return (0);
pcfg->force_link = 1;
/* force_link is set; let's parse the rest of the fields */
snprintf(sbuf, 128, "port.%d.speed", port);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0) {
switch (val) {
case 10:
pcfg->speed = AR8327_PORT_SPEED_10;
break;
case 100:
pcfg->speed = AR8327_PORT_SPEED_100;
break;
case 1000:
pcfg->speed = AR8327_PORT_SPEED_1000;
break;
default:
device_printf(sc->sc_dev,
"%s: invalid port %d duplex value (%d)\n",
__func__,
port,
val);
return (0);
}
}
snprintf(sbuf, 128, "port.%d.duplex", port);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pcfg->duplex = val;
snprintf(sbuf, 128, "port.%d.txpause", port);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pcfg->txpause = val;
snprintf(sbuf, 128, "port.%d.rxpause", port);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pcfg->rxpause = val;
#if 0
device_printf(sc->sc_dev,
"%s: port %d: speed=%d, duplex=%d, txpause=%d, rxpause=%d\n",
__func__,
port,
pcfg->speed,
pcfg->duplex,
pcfg->txpause,
pcfg->rxpause);
#endif
return (1);
}
/*
* Parse the pad configuration from the boot hints.
*
* The (mostly optional) fields are:
*
* uint32_t mode;
* uint32_t rxclk_sel;
* uint32_t txclk_sel;
* uint32_t txclk_delay_sel;
* uint32_t rxclk_delay_sel;
* uint32_t txclk_delay_en;
* uint32_t rxclk_delay_en;
* uint32_t sgmii_delay_en;
* uint32_t pipe_rxclk_sel;
*
* If mode isn't in the hints, 0 is returned.
* Else the structure is fleshed out and 1 is returned.
*/
static int
ar8327_fetch_pdata_pad(struct arswitch_softc *sc,
struct ar8327_pad_cfg *pc,
int pad)
{
int val;
char sbuf[128];
/* Check if mode exists */
val = 0;
snprintf(sbuf, 128, "pad.%d.mode", pad);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) != 0)
return (0);
/* assume that 'mode' exists and was found */
pc->mode = val;
snprintf(sbuf, 128, "pad.%d.rxclk_sel", pad);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pc->rxclk_sel = val;
snprintf(sbuf, 128, "pad.%d.txclk_sel", pad);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pc->txclk_sel = val;
snprintf(sbuf, 128, "pad.%d.txclk_delay_sel", pad);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pc->txclk_delay_sel = val;
snprintf(sbuf, 128, "pad.%d.rxclk_delay_sel", pad);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pc->rxclk_delay_sel = val;
snprintf(sbuf, 128, "pad.%d.txclk_delay_en", pad);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pc->txclk_delay_en = val;
snprintf(sbuf, 128, "pad.%d.rxclk_delay_en", pad);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pc->rxclk_delay_en = val;
snprintf(sbuf, 128, "pad.%d.sgmii_delay_en", pad);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pc->sgmii_delay_en = val;
snprintf(sbuf, 128, "pad.%d.pipe_rxclk_sel", pad);
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
sbuf, &val) == 0)
pc->pipe_rxclk_sel = val;
#if 0
device_printf(sc->sc_dev,
"%s: pad %d: mode=%d, rxclk_sel=%d, txclk_sel=%d, "
"txclk_delay_sel=%d, rxclk_delay_sel=%d, txclk_delay_en=%d, "
"rxclk_enable_en=%d, sgmii_delay_en=%d, pipe_rxclk_sel=%d\n",
__func__,
pad,
pc->mode,
pc->rxclk_sel,
pc->txclk_sel,
pc->txclk_delay_sel,
pc->rxclk_delay_sel,
pc->txclk_delay_en,
pc->rxclk_delay_en,
pc->sgmii_delay_en,
pc->pipe_rxclk_sel);
#endif
return (1);
}
/*
* Fetch the SGMII configuration block from the boot hints.
*/
static int
ar8327_fetch_pdata_sgmii(struct arswitch_softc *sc,
struct ar8327_sgmii_cfg *scfg)
{
int val;
/* sgmii_ctrl */
val = 0;
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
"sgmii.ctrl", &val) != 0)
return (0);
scfg->sgmii_ctrl = val;
/* serdes_aen */
val = 0;
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
"sgmii.serdes_aen", &val) != 0)
return (0);
scfg->serdes_aen = val;
return (1);
}
/*
* Fetch the LED configuration from the boot hints.
*/
static int
ar8327_fetch_pdata_led(struct arswitch_softc *sc,
struct ar8327_led_cfg *lcfg)
{
int val;
val = 0;
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
"led.ctrl0", &val) != 0)
return (0);
lcfg->led_ctrl0 = val;
val = 0;
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
"led.ctrl1", &val) != 0)
return (0);
lcfg->led_ctrl1 = val;
val = 0;
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
"led.ctrl2", &val) != 0)
return (0);
lcfg->led_ctrl2 = val;
val = 0;
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
"led.ctrl3", &val) != 0)
return (0);
lcfg->led_ctrl3 = val;
val = 0;
if (resource_int_value(device_get_name(sc->sc_dev),
device_get_unit(sc->sc_dev),
"led.open_drain", &val) != 0)
return (0);
lcfg->open_drain = val;
return (1);
}
/*
* Initialise the ar8327 specific hardware features from
* the hints provided in the boot environment.
*/
static int
ar8327_init_pdata(struct arswitch_softc *sc)
{
struct ar8327_pad_cfg pc;
struct ar8327_port_cfg port_cfg;
struct ar8327_sgmii_cfg scfg;
struct ar8327_led_cfg lcfg;
uint32_t t, new_pos, pos;
/* Port 0 */
bzero(&port_cfg, sizeof(port_cfg));
sc->ar8327.port0_status = 0;
if (ar8327_fetch_pdata_port(sc, &port_cfg, 0))
sc->ar8327.port0_status = ar8327_get_port_init_status(&port_cfg);
/* Port 6 */
bzero(&port_cfg, sizeof(port_cfg));
sc->ar8327.port6_status = 0;
if (ar8327_fetch_pdata_port(sc, &port_cfg, 6))
sc->ar8327.port6_status = ar8327_get_port_init_status(&port_cfg);
/* Pad 0 */
bzero(&pc, sizeof(pc));
t = 0;
if (ar8327_fetch_pdata_pad(sc, &pc, 0))
t = ar8327_get_pad_cfg(&pc);
#if 0
if (AR8X16_IS_SWITCH(sc, AR8337))
t |= AR8337_PAD_MAC06_EXCHANGE_EN;
#endif
arswitch_writereg(sc->sc_dev, AR8327_REG_PAD0_MODE, t);
/* Pad 5 */
bzero(&pc, sizeof(pc));
t = 0;
if (ar8327_fetch_pdata_pad(sc, &pc, 5))
t = ar8327_get_pad_cfg(&pc);
arswitch_writereg(sc->sc_dev, AR8327_REG_PAD5_MODE, t);
/* Pad 6 */
bzero(&pc, sizeof(pc));
t = 0;
if (ar8327_fetch_pdata_pad(sc, &pc, 6))
t = ar8327_get_pad_cfg(&pc);
arswitch_writereg(sc->sc_dev, AR8327_REG_PAD6_MODE, t);
pos = arswitch_readreg(sc->sc_dev, AR8327_REG_POWER_ON_STRIP);
new_pos = pos;
/* XXX LED config */
bzero(&lcfg, sizeof(lcfg));
if (ar8327_fetch_pdata_led(sc, &lcfg)) {
if (lcfg.open_drain)
new_pos |= AR8327_POWER_ON_STRIP_LED_OPEN_EN;
else
new_pos &= ~AR8327_POWER_ON_STRIP_LED_OPEN_EN;
arswitch_writereg(sc->sc_dev, AR8327_REG_LED_CTRL0,
lcfg.led_ctrl0);
arswitch_writereg(sc->sc_dev, AR8327_REG_LED_CTRL1,
lcfg.led_ctrl1);
arswitch_writereg(sc->sc_dev, AR8327_REG_LED_CTRL2,
lcfg.led_ctrl2);
arswitch_writereg(sc->sc_dev, AR8327_REG_LED_CTRL3,
lcfg.led_ctrl3);
if (new_pos != pos)
new_pos |= AR8327_POWER_ON_STRIP_POWER_ON_SEL;
}
/* SGMII config */
bzero(&scfg, sizeof(scfg));
if (ar8327_fetch_pdata_sgmii(sc, &scfg)) {
t = scfg.sgmii_ctrl;
if (sc->chip_rev == 1)
t |= AR8327_SGMII_CTRL_EN_PLL |
AR8327_SGMII_CTRL_EN_RX |
AR8327_SGMII_CTRL_EN_TX;
else
t &= ~(AR8327_SGMII_CTRL_EN_PLL |
AR8327_SGMII_CTRL_EN_RX |
AR8327_SGMII_CTRL_EN_TX);
arswitch_writereg(sc->sc_dev, AR8327_REG_SGMII_CTRL, t);
if (scfg.serdes_aen)
new_pos &= ~AR8327_POWER_ON_STRIP_SERDES_AEN;
else
new_pos |= AR8327_POWER_ON_STRIP_SERDES_AEN;
}
arswitch_writereg(sc->sc_dev, AR8327_REG_POWER_ON_STRIP, new_pos);
return (0);
}
static int
ar8327_hw_setup(struct arswitch_softc *sc)
{
int i;
int err;
/* pdata fetch and setup */
err = ar8327_init_pdata(sc);
if (err != 0)
return (err);
/* XXX init leds */
for (i = 0; i < AR8327_NUM_PHYS; i++) {
/* phy fixup */
ar8327_phy_fixup(sc, i);
/* start PHY autonegotiation? */
/* XXX is this done as part of the normal PHY setup? */
};
/* Let things settle */
DELAY(1000);
return (0);
}
/*
* Initialise other global values, for the AR8327.
*/
static int
ar8327_hw_global_setup(struct arswitch_softc *sc)
{
uint32_t t;
/* enable CPU port and disable mirror port */
t = AR8327_FWD_CTRL0_CPU_PORT_EN |
AR8327_FWD_CTRL0_MIRROR_PORT;
arswitch_writereg(sc->sc_dev, AR8327_REG_FWD_CTRL0, t);
/* forward multicast and broadcast frames to CPU */
t = (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_UC_FLOOD_S) |
(AR8327_PORTS_ALL << AR8327_FWD_CTRL1_MC_FLOOD_S) |
(AR8327_PORTS_ALL << AR8327_FWD_CTRL1_BC_FLOOD_S);
arswitch_writereg(sc->sc_dev, AR8327_REG_FWD_CTRL1, t);
/* enable jumbo frames */
/* XXX need to macro-shift the value! */
arswitch_modifyreg(sc->sc_dev, AR8327_REG_MAX_FRAME_SIZE,
AR8327_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);
/* Enable MIB counters */
arswitch_modifyreg(sc->sc_dev, AR8327_REG_MODULE_EN,
AR8327_MODULE_EN_MIB, AR8327_MODULE_EN_MIB);
/* Set the right number of ports */
sc->info.es_nports = 6;
return (0);
}
/*
* Port setup.
*/
static void
ar8327_port_init(struct arswitch_softc *sc, int port)
{
uint32_t t;
if (port == AR8X16_PORT_CPU)
t = sc->ar8327.port0_status;
else if (port == 6)
t = sc->ar8327.port6_status;
else
t = AR8X16_PORT_STS_LINK_AUTO;
arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_STATUS(port), t);
arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_HEADER(port), 0);
/*
* Default to 1 port group.
*/
t = 1 << AR8327_PORT_VLAN0_DEF_SVID_S;
t |= 1 << AR8327_PORT_VLAN0_DEF_CVID_S;
arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_VLAN0(port), t);
t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_VLAN1(port), t);
/*
* This doesn't configure any ports which this port can "see".
* bits 0-6 control which ports a frame coming into this port
* can be sent out to.
*
* So by doing this, we're making it impossible to send frames out
* to that port.
*/
t = AR8327_PORT_LOOKUP_LEARN;
t |= AR8X16_PORT_CTRL_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
/* So this allows traffic to any port except ourselves */
t |= (0x3f & ~(1 << port));
arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_LOOKUP(port), t);
}
static int
ar8327_port_vlan_setup(struct arswitch_softc *sc, etherswitch_port_t *p)
{
/* XXX stub for now */
device_printf(sc->sc_dev, "%s: called\n", __func__);
return (0);
}
static int
ar8327_port_vlan_get(struct arswitch_softc *sc, etherswitch_port_t *p)
{
/* XXX stub for now */
device_printf(sc->sc_dev, "%s: called\n", __func__);
return (0);
}
static void
ar8327_reset_vlans(struct arswitch_softc *sc)
{
int i;
uint32_t mode, t;
/*
* Disable mirroring.
*/
arswitch_modifyreg(sc->sc_dev, AR8327_REG_FWD_CTRL0,
AR8327_FWD_CTRL0_MIRROR_PORT,
(0xF << AR8327_FWD_CTRL0_MIRROR_PORT_S));
/*
* For now, let's default to one portgroup, just so traffic
* flows. All ports can see other ports.
*/
for (i = 0; i < AR8327_NUM_PORTS; i++) {
/* set pvid = 1; there's only one vlangroup */
t = 1 << AR8327_PORT_VLAN0_DEF_SVID_S;
t |= 1 << AR8327_PORT_VLAN0_DEF_CVID_S;
arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_VLAN0(i), t);
/* set egress == out_keep */
mode = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH;
t = AR8327_PORT_VLAN1_PORT_VLAN_PROP;
t |= mode << AR8327_PORT_VLAN1_OUT_MODE_S;
arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_VLAN1(i), t);
/* Ports can see other ports */
t = (0x3f & ~(1 << i)); /* all ports besides us */
t |= AR8327_PORT_LOOKUP_LEARN;
/* in_port_only, forward */
t |= AR8X16_PORT_VLAN_MODE_PORT_ONLY << AR8327_PORT_LOOKUP_IN_MODE_S;
t |= AR8X16_PORT_CTRL_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
arswitch_writereg(sc->sc_dev, AR8327_REG_PORT_LOOKUP(i), t);
/*
* Disable port mirroring entirely.
*/
arswitch_modifyreg(sc->sc_dev,
AR8327_REG_PORT_LOOKUP(i),
AR8327_PORT_LOOKUP_ING_MIRROR_EN,
0);
arswitch_modifyreg(sc->sc_dev,
AR8327_REG_PORT_HOL_CTRL1(i),
AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN,
0);
}
}
static int
ar8327_vlan_getvgroup(struct arswitch_softc *sc, etherswitch_vlangroup_t *vg)
{
device_printf(sc->sc_dev, "%s: called\n", __func__);
return (0);
}
static int
ar8327_vlan_setvgroup(struct arswitch_softc *sc, etherswitch_vlangroup_t *vg)
{
device_printf(sc->sc_dev, "%s: called\n", __func__);
return (0);
}
static int
ar8327_get_pvid(struct arswitch_softc *sc, int port, int *pvid)
{
device_printf(sc->sc_dev, "%s: called\n", __func__);
return (0);
}
static int
ar8327_set_pvid(struct arswitch_softc *sc, int port, int pvid)
{
device_printf(sc->sc_dev, "%s: called\n", __func__);
return (0);
}
static int
ar8327_atu_flush(struct arswitch_softc *sc)
{
int ret;
ret = arswitch_waitreg(sc->sc_dev,
AR8327_REG_ATU_FUNC,
AR8327_ATU_FUNC_BUSY,
0,
1000);
if (ret)
device_printf(sc->sc_dev, "%s: waitreg failed\n", __func__);
if (!ret)
arswitch_writereg(sc->sc_dev,
AR8327_REG_ATU_FUNC,
AR8327_ATU_FUNC_OP_FLUSH);
return (ret);
}
void
ar8327_attach(struct arswitch_softc *sc)
{
sc->hal.arswitch_hw_setup = ar8327_hw_setup;
sc->hal.arswitch_hw_global_setup = ar8327_hw_global_setup;
sc->hal.arswitch_port_init = ar8327_port_init;
sc->hal.arswitch_port_vlan_setup = ar8327_port_vlan_setup;
sc->hal.arswitch_port_vlan_get = ar8327_port_vlan_get;
sc->hal.arswitch_vlan_init_hw = ar8327_reset_vlans;
sc->hal.arswitch_vlan_getvgroup = ar8327_vlan_getvgroup;
sc->hal.arswitch_vlan_setvgroup = ar8327_vlan_setvgroup;
sc->hal.arswitch_vlan_get_pvid = ar8327_get_pvid;
sc->hal.arswitch_vlan_set_pvid = ar8327_set_pvid;
sc->hal.arswitch_atu_flush = ar8327_atu_flush;
/* Set the switch vlan capabilities. */
sc->info.es_vlan_caps = ETHERSWITCH_VLAN_DOT1Q |
ETHERSWITCH_VLAN_PORT | ETHERSWITCH_VLAN_DOUBLE_TAG;
sc->info.es_nvlangroups = AR8X16_MAX_VLANS;
}
Reference in New Issue View Git Blame Copy Permalink