freebsd-dev/sys/mips/atheros/uart_dev_ar933x.c
Adrian Chadd c821a62f9c Commit some sins in the name of "oh god oh god I don't really want to
be able to claim I know how the UART code works."

* Just return 115200 as the current baud rate. I should cache it in the
  device struct and return that but I'm lazy right now.
* don't error out on other ioctl settings for now, just silently ignore them.
* remove some code that was copied from the 8250 driver that isn't needed
  any longer.

Tested:

* AR9331, Carambola-2 board.
2014-07-27 05:44:42 +00:00

738 lines
17 KiB
C

/*-
* Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <machine/bus.h>
#include <dev/uart/uart.h>
#include <dev/uart/uart_cpu.h>
#include <dev/uart/uart_bus.h>
#include <mips/atheros/ar933x_uart.h>
#include "uart_if.h"
/*
* Default system clock is 25MHz; see ar933x_chip.c for how
* the startup process determines whether it's 25MHz or 40MHz.
*/
#define DEFAULT_RCLK (25 * 1000 * 1000)
#define ar933x_getreg(bas, reg) \
bus_space_read_4((bas)->bst, (bas)->bsh, reg)
#define ar933x_setreg(bas, reg, value) \
bus_space_write_4((bas)->bst, (bas)->bsh, reg, value)
static int
ar933x_drain(struct uart_bas *bas, int what)
{
int limit;
if (what & UART_DRAIN_TRANSMITTER) {
limit = 10*1024;
/* Loop over until the TX FIFO shows entirely clear */
while (--limit) {
if ((ar933x_getreg(bas, AR933X_UART_CS_REG)
& AR933X_UART_CS_TX_BUSY) == 0)
break;
}
if (limit == 0) {
return (EIO);
}
}
if (what & UART_DRAIN_RECEIVER) {
limit=10*4096;
while (--limit) {
/* XXX duplicated from ar933x_getc() */
/* XXX TODO: refactor! */
/* If there's nothing to read, stop! */
if ((ar933x_getreg(bas, AR933X_UART_DATA_REG) &
AR933X_UART_DATA_RX_CSR) == 0) {
break;
}
/* Read the top of the RX FIFO */
(void) ar933x_getreg(bas, AR933X_UART_DATA_REG);
/* Remove that entry from said RX FIFO */
ar933x_setreg(bas, AR933X_UART_DATA_REG,
AR933X_UART_DATA_RX_CSR);
uart_barrier(bas);
DELAY(2);
}
if (limit == 0) {
return (EIO);
}
}
return (0);
}
/*
* Calculate the baud from the given chip configuration parameters.
*/
static unsigned long
ar933x_uart_get_baud(unsigned int clk, unsigned int scale,
unsigned int step)
{
uint64_t t;
uint32_t div;
div = (2 << 16) * (scale + 1);
t = clk;
t *= step;
t += (div / 2);
t = t / div;
return (t);
}
/*
* Calculate the scale/step with the lowest possible deviation from
* the target baudrate.
*/
static void
ar933x_uart_get_scale_step(struct uart_bas *bas, unsigned int baud,
unsigned int *scale, unsigned int *step)
{
unsigned int tscale;
uint32_t clk;
long min_diff;
clk = bas->rclk;
*scale = 0;
*step = 0;
min_diff = baud;
for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) {
uint64_t tstep;
int diff;
tstep = baud * (tscale + 1);
tstep *= (2 << 16);
tstep = tstep / clk;
if (tstep > AR933X_UART_MAX_STEP)
break;
diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud);
if (diff < min_diff) {
min_diff = diff;
*scale = tscale;
*step = tstep;
}
}
}
static int
ar933x_param(struct uart_bas *bas, int baudrate, int databits, int stopbits,
int parity)
{
/* UART always 8 bits */
/* UART always 1 stop bit */
/* UART parity is controllable by bits 0:1, ignore for now */
/* Set baudrate if required. */
if (baudrate > 0) {
uint32_t clock_scale, clock_step;
/* Find the best fit for the given baud rate */
ar933x_uart_get_scale_step(bas, baudrate, &clock_scale,
&clock_step);
/*
* Program the clock register in its entirety - no need
* for Read-Modify-Write.
*/
ar933x_setreg(bas, AR933X_UART_CLOCK_REG,
((clock_scale & AR933X_UART_CLOCK_SCALE_M)
<< AR933X_UART_CLOCK_SCALE_S) |
(clock_step & AR933X_UART_CLOCK_STEP_M));
}
uart_barrier(bas);
return (0);
}
/*
* Low-level UART interface.
*/
static int ar933x_probe(struct uart_bas *bas);
static void ar933x_init(struct uart_bas *bas, int, int, int, int);
static void ar933x_term(struct uart_bas *bas);
static void ar933x_putc(struct uart_bas *bas, int);
static int ar933x_rxready(struct uart_bas *bas);
static int ar933x_getc(struct uart_bas *bas, struct mtx *);
static struct uart_ops uart_ar933x_ops = {
.probe = ar933x_probe,
.init = ar933x_init,
.term = ar933x_term,
.putc = ar933x_putc,
.rxready = ar933x_rxready,
.getc = ar933x_getc,
};
static int
ar933x_probe(struct uart_bas *bas)
{
/* We always know this will be here */
return (0);
}
static void
ar933x_init(struct uart_bas *bas, int baudrate, int databits, int stopbits,
int parity)
{
uint32_t reg;
/* Setup default parameters */
ar933x_param(bas, baudrate, databits, stopbits, parity);
/* XXX Force enable UART in case it was disabled */
/* Disable all interrupts */
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, 0x00000000);
/* Disable the host interrupt */
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
reg &= ~AR933X_UART_CS_HOST_INT_EN;
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
uart_barrier(bas);
/* XXX Set RTS/DTR? */
}
/*
* Detach from console.
*/
static void
ar933x_term(struct uart_bas *bas)
{
/* XXX TODO */
}
static void
ar933x_putc(struct uart_bas *bas, int c)
{
int limit;
limit = 250000;
/* Wait for space in the TX FIFO */
while ( ((ar933x_getreg(bas, AR933X_UART_DATA_REG) &
AR933X_UART_DATA_TX_CSR) == 0) && --limit)
DELAY(4);
/* Write the actual byte */
ar933x_setreg(bas, AR933X_UART_DATA_REG,
(c & 0xff) | AR933X_UART_DATA_TX_CSR);
}
static int
ar933x_rxready(struct uart_bas *bas)
{
/* Wait for a character to come ready */
return (!!(ar933x_getreg(bas, AR933X_UART_DATA_REG)
& AR933X_UART_DATA_RX_CSR));
}
static int
ar933x_getc(struct uart_bas *bas, struct mtx *hwmtx)
{
int c;
uart_lock(hwmtx);
/* Wait for a character to come ready */
while ((ar933x_getreg(bas, AR933X_UART_DATA_REG) &
AR933X_UART_DATA_RX_CSR) == 0) {
uart_unlock(hwmtx);
DELAY(4);
uart_lock(hwmtx);
}
/* Read the top of the RX FIFO */
c = ar933x_getreg(bas, AR933X_UART_DATA_REG) & 0xff;
/* Remove that entry from said RX FIFO */
ar933x_setreg(bas, AR933X_UART_DATA_REG, AR933X_UART_DATA_RX_CSR);
uart_unlock(hwmtx);
return (c);
}
/*
* High-level UART interface.
*/
struct ar933x_softc {
struct uart_softc base;
uint32_t u_ier;
};
static int ar933x_bus_attach(struct uart_softc *);
static int ar933x_bus_detach(struct uart_softc *);
static int ar933x_bus_flush(struct uart_softc *, int);
static int ar933x_bus_getsig(struct uart_softc *);
static int ar933x_bus_ioctl(struct uart_softc *, int, intptr_t);
static int ar933x_bus_ipend(struct uart_softc *);
static int ar933x_bus_param(struct uart_softc *, int, int, int, int);
static int ar933x_bus_probe(struct uart_softc *);
static int ar933x_bus_receive(struct uart_softc *);
static int ar933x_bus_setsig(struct uart_softc *, int);
static int ar933x_bus_transmit(struct uart_softc *);
static void ar933x_bus_grab(struct uart_softc *);
static void ar933x_bus_ungrab(struct uart_softc *);
static kobj_method_t ar933x_methods[] = {
KOBJMETHOD(uart_attach, ar933x_bus_attach),
KOBJMETHOD(uart_detach, ar933x_bus_detach),
KOBJMETHOD(uart_flush, ar933x_bus_flush),
KOBJMETHOD(uart_getsig, ar933x_bus_getsig),
KOBJMETHOD(uart_ioctl, ar933x_bus_ioctl),
KOBJMETHOD(uart_ipend, ar933x_bus_ipend),
KOBJMETHOD(uart_param, ar933x_bus_param),
KOBJMETHOD(uart_probe, ar933x_bus_probe),
KOBJMETHOD(uart_receive, ar933x_bus_receive),
KOBJMETHOD(uart_setsig, ar933x_bus_setsig),
KOBJMETHOD(uart_transmit, ar933x_bus_transmit),
KOBJMETHOD(uart_grab, ar933x_bus_grab),
KOBJMETHOD(uart_ungrab, ar933x_bus_ungrab),
{ 0, 0 }
};
struct uart_class uart_ar933x_class = {
"ar933x",
ar933x_methods,
sizeof(struct ar933x_softc),
.uc_ops = &uart_ar933x_ops,
.uc_range = 8,
.uc_rclk = DEFAULT_RCLK
};
#define SIGCHG(c, i, s, d) \
if (c) { \
i |= (i & s) ? s : s | d; \
} else { \
i = (i & s) ? (i & ~s) | d : i; \
}
static int
ar933x_bus_attach(struct uart_softc *sc)
{
struct ar933x_softc *u = (struct ar933x_softc *)sc;
struct uart_bas *bas = &sc->sc_bas;
uint32_t reg;
/* XXX TODO: flush transmitter */
/*
* Setup initial interrupt notifications.
*
* XXX for now, just RX FIFO valid.
* Later on (when they're handled), also handle
* RX errors/overflow.
*/
u->u_ier = AR933X_UART_INT_RX_VALID;
/* Enable RX interrupts to kick-start things */
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, u->u_ier);
/* Enable the host interrupt now */
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
reg |= AR933X_UART_CS_HOST_INT_EN;
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
return (0);
}
static int
ar933x_bus_detach(struct uart_softc *sc)
{
struct uart_bas *bas = &sc->sc_bas;
uint32_t reg;
/* Disable all interrupts */
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, 0x00000000);
/* Disable the host interrupt */
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
reg &= ~AR933X_UART_CS_HOST_INT_EN;
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
uart_barrier(bas);
return (0);
}
static int
ar933x_bus_flush(struct uart_softc *sc, int what)
{
struct uart_bas *bas;
bas = &sc->sc_bas;
uart_lock(sc->sc_hwmtx);
ar933x_drain(bas, what);
uart_unlock(sc->sc_hwmtx);
return (0);
}
static int
ar933x_bus_getsig(struct uart_softc *sc)
{
uint32_t sig = sc->sc_hwsig;
/*
* For now, let's just return that DSR/DCD/CTS is asserted.
*/
SIGCHG(1, sig, SER_DSR, SER_DDSR);
SIGCHG(1, sig, SER_CTS, SER_DCTS);
SIGCHG(1, sig, SER_DCD, SER_DDCD);
SIGCHG(1, sig, SER_RI, SER_DRI);
sc->sc_hwsig = sig & ~SER_MASK_DELTA;
return (sig);
}
/*
* XXX TODO: actually implement the rest of this!
*/
static int
ar933x_bus_ioctl(struct uart_softc *sc, int request, intptr_t data)
{
int error = 0;
/* XXX lock */
switch (request) {
case UART_IOCTL_BREAK:
case UART_IOCTL_IFLOW:
case UART_IOCTL_OFLOW:
break;
case UART_IOCTL_BAUD:
*(int*)data = 115200;
break;
default:
error = EINVAL;
break;
}
/* XXX unlock */
return (error);
}
/*
* Bus interrupt handler.
*
* For now, system interrupts are disabled.
* So this is just called from a callout in uart_core.c
* to poll various state.
*/
static int
ar933x_bus_ipend(struct uart_softc *sc)
{
struct ar933x_softc *u = (struct ar933x_softc *)sc;
struct uart_bas *bas = &sc->sc_bas;
int ipend = 0;
uint32_t isr;
uart_lock(sc->sc_hwmtx);
/*
* Fetch/ACK the ISR status.
*/
isr = ar933x_getreg(bas, AR933X_UART_INT_REG);
ar933x_setreg(bas, AR933X_UART_INT_REG, isr);
uart_barrier(bas);
/*
* RX ready - notify upper layer.
*/
if (isr & AR933X_UART_INT_RX_VALID) {
ipend |= SER_INT_RXREADY;
}
/*
* If we get this interrupt, we should disable
* it from the interrupt mask and inform the uart
* driver appropriately.
*
* We can't keep setting SER_INT_TXIDLE or SER_INT_SIGCHG
* all the time or IO stops working. So we will always
* clear this interrupt if we get it, then we only signal
* the upper layer if we were doing active TX in the
* first place.
*
* Also, the name is misleading. This actually means
* "the FIFO is almost empty." So if we just write some
* more data to the FIFO without checking whether it can
* take said data, we'll overflow the thing.
*
* Unfortunately the FreeBSD uart device has no concept of
* partial UART writes - it expects that the whole buffer
* is written to the hardware. Thus for now, ar933x_bus_transmit()
* will wait for the FIFO to finish draining before it pushes
* more frames into it.
*/
if (isr & AR933X_UART_INT_TX_EMPTY) {
/*
* Update u_ier to disable TX notifications; update hardware
*/
u->u_ier &= ~AR933X_UART_INT_TX_EMPTY;
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, u->u_ier);
uart_barrier(bas);
}
/*
* Only signal TX idle if we're not busy transmitting.
*
* XXX I never get _out_ of txbusy? Debug that!
*/
if (sc->sc_txbusy) {
if (isr & AR933X_UART_INT_TX_EMPTY) {
ipend |= SER_INT_TXIDLE;
} else {
ipend |= SER_INT_SIGCHG;
}
}
uart_unlock(sc->sc_hwmtx);
return (ipend);
}
static int
ar933x_bus_param(struct uart_softc *sc, int baudrate, int databits,
int stopbits, int parity)
{
struct uart_bas *bas;
int error;
bas = &sc->sc_bas;
uart_lock(sc->sc_hwmtx);
error = ar933x_param(bas, baudrate, databits, stopbits, parity);
uart_unlock(sc->sc_hwmtx);
return (error);
}
static int
ar933x_bus_probe(struct uart_softc *sc)
{
struct uart_bas *bas;
int error;
bas = &sc->sc_bas;
error = ar933x_probe(bas);
if (error)
return (error);
/* Reset FIFOs. */
ar933x_drain(bas, UART_FLUSH_RECEIVER|UART_FLUSH_TRANSMITTER);
/* XXX TODO: actually find out what the FIFO depth is! */
sc->sc_rxfifosz = 16;
sc->sc_txfifosz = 16;
return (0);
}
static int
ar933x_bus_receive(struct uart_softc *sc)
{
struct uart_bas *bas = &sc->sc_bas;
int xc;
uart_lock(sc->sc_hwmtx);
/* Loop over until we are full, or no data is available */
while (ar933x_rxready(bas)) {
if (uart_rx_full(sc)) {
sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN;
break;
}
/* Read the top of the RX FIFO */
xc = ar933x_getreg(bas, AR933X_UART_DATA_REG) & 0xff;
/* Remove that entry from said RX FIFO */
ar933x_setreg(bas, AR933X_UART_DATA_REG,
AR933X_UART_DATA_RX_CSR);
uart_barrier(bas);
/* XXX frame, parity error */
uart_rx_put(sc, xc);
}
/*
* XXX TODO: Discard everything left in the Rx FIFO?
* XXX only if we've hit an overrun condition?
*/
uart_unlock(sc->sc_hwmtx);
return (0);
}
static int
ar933x_bus_setsig(struct uart_softc *sc, int sig)
{
#if 0
struct ar933x_softc *ns8250 = (struct ar933x_softc*)sc;
struct uart_bas *bas;
uint32_t new, old;
bas = &sc->sc_bas;
do {
old = sc->sc_hwsig;
new = old;
if (sig & SER_DDTR) {
SIGCHG(sig & SER_DTR, new, SER_DTR,
SER_DDTR);
}
if (sig & SER_DRTS) {
SIGCHG(sig & SER_RTS, new, SER_RTS,
SER_DRTS);
}
} while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
uart_lock(sc->sc_hwmtx);
ns8250->mcr &= ~(MCR_DTR|MCR_RTS);
if (new & SER_DTR)
ns8250->mcr |= MCR_DTR;
if (new & SER_RTS)
ns8250->mcr |= MCR_RTS;
uart_setreg(bas, REG_MCR, ns8250->mcr);
uart_barrier(bas);
uart_unlock(sc->sc_hwmtx);
#endif
return (0);
}
/*
* Write the current transmit buffer to the TX FIFO.
*
* Unfortunately the FreeBSD uart device has no concept of
* partial UART writes - it expects that the whole buffer
* is written to the hardware. Thus for now, this will wait for
* the FIFO to finish draining before it pushes more frames into it.
*
* If non-blocking operation is truely needed here, either
* the FreeBSD uart device will need to handle partial writes
* in xxx_bus_transmit(), or we'll need to do TX FIFO buffering
* of our own here.
*/
static int
ar933x_bus_transmit(struct uart_softc *sc)
{
struct uart_bas *bas = &sc->sc_bas;
struct ar933x_softc *u = (struct ar933x_softc *)sc;
int i;
uart_lock(sc->sc_hwmtx);
/* Wait for the FIFO to be clear - see above */
while (ar933x_getreg(bas, AR933X_UART_CS_REG) &
AR933X_UART_CS_TX_BUSY)
;
/*
* Write some data!
*/
for (i = 0; i < sc->sc_txdatasz; i++) {
/* Write the TX data */
ar933x_setreg(bas, AR933X_UART_DATA_REG,
(sc->sc_txbuf[i] & 0xff) | AR933X_UART_DATA_TX_CSR);
uart_barrier(bas);
}
/*
* Now that we're transmitting, get interrupt notification
* when the FIFO is (almost) empty - see above.
*/
u->u_ier |= AR933X_UART_INT_TX_EMPTY;
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, u->u_ier);
uart_barrier(bas);
/*
* Inform the upper layer that we are presently transmitting
* data to the hardware; this will be cleared when the
* TXIDLE interrupt occurs.
*/
sc->sc_txbusy = 1;
uart_unlock(sc->sc_hwmtx);
return (0);
}
static void
ar933x_bus_grab(struct uart_softc *sc)
{
struct uart_bas *bas = &sc->sc_bas;
uint32_t reg;
/* Disable the host interrupt now */
uart_lock(sc->sc_hwmtx);
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
reg &= ~AR933X_UART_CS_HOST_INT_EN;
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
uart_unlock(sc->sc_hwmtx);
}
static void
ar933x_bus_ungrab(struct uart_softc *sc)
{
struct uart_bas *bas = &sc->sc_bas;
uint32_t reg;
/* Enable the host interrupt now */
uart_lock(sc->sc_hwmtx);
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
reg |= AR933X_UART_CS_HOST_INT_EN;
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
uart_unlock(sc->sc_hwmtx);
}