freebsd-dev/sys/dev/aic7xxx/aic7xxx.c
Doug Rabson 21c3015a24 * Completely rewrite the alpha busspace to hide the implementation from
the drivers.
* Remove legacy inx/outx support from chipset and replace with macros
  which call busspace.
* Rework pci config accesses to route through the pcib device instead of
  calling a MD function directly.

With these changes it is possible to cleanly support machines which have
more than one independantly numbered PCI busses. As a bonus, the new
busspace implementation should be measurably faster than the old one.
2000-08-28 21:48:13 +00:00

7431 lines
196 KiB
C

/*
* Generic driver for the aic7xxx based adaptec SCSI controllers
* Product specific probe and attach routines can be found in:
* i386/eisa/ahc_eisa.c 27/284X and aic7770 motherboard controllers
* pci/ahc_pci.c 3985, 3980, 3940, 2940, aic7895, aic7890,
* aic7880, aic7870, aic7860, and aic7850 controllers
*
* Copyright (c) 1994, 1995, 1996, 1997, 1998, 1999, 2000 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU Public License ("GPL").
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* A few notes on features of the driver.
*
* SCB paging takes advantage of the fact that devices stay disconnected
* from the bus a relatively long time and that while they're disconnected,
* having the SCBs for these transactions down on the host adapter is of
* little use. Instead of leaving this idle SCB down on the card we copy
* it back up into kernel memory and reuse the SCB slot on the card to
* schedule another transaction. This can be a real payoff when doing random
* I/O to tagged queueing devices since there are more transactions active at
* once for the device to sort for optimal seek reduction. The algorithm goes
* like this...
*
* The sequencer maintains two lists of its hardware SCBs. The first is the
* singly linked free list which tracks all SCBs that are not currently in
* use. The second is the doubly linked disconnected list which holds the
* SCBs of transactions that are in the disconnected state sorted most
* recently disconnected first. When the kernel queues a transaction to
* the card, a hardware SCB to "house" this transaction is retrieved from
* either of these two lists. If the SCB came from the disconnected list,
* a check is made to see if any data transfer or SCB linking (more on linking
* in a bit) information has been changed since it was copied from the host
* and if so, DMAs the SCB back up before it can be used. Once a hardware
* SCB has been obtained, the SCB is DMAed from the host. Before any work
* can begin on this SCB, the sequencer must ensure that either the SCB is
* for a tagged transaction or the target is not already working on another
* non-tagged transaction. If a conflict arises in the non-tagged case, the
* sequencer finds the SCB for the active transactions and sets the SCB_LINKED
* field in that SCB to this next SCB to execute. To facilitate finding
* active non-tagged SCBs, the last four bytes of up to the first four hardware
* SCBs serve as a storage area for the currently active SCB ID for each
* target.
*
* When a device reconnects, a search is made of the hardware SCBs to find
* the SCB for this transaction. If the search fails, a hardware SCB is
* pulled from either the free or disconnected SCB list and the proper
* SCB is DMAed from the host. If the MK_MESSAGE control bit is set
* in the control byte of the SCB while it was disconnected, the sequencer
* will assert ATN and attempt to issue a message to the host.
*
* When a command completes, a check for non-zero status and residuals is
* made. If either of these conditions exists, the SCB is DMAed back up to
* the host so that it can interpret this information. Additionally, in the
* case of bad status, the sequencer generates a special interrupt and pauses
* itself. This allows the host to setup a request sense command if it
* chooses for this target synchronously with the error so that sense
* information isn't lost.
*
*/
#include <opt_aic7xxx.h>
#include <pci.h>
#include <stddef.h> /* For offsetof */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/eventhandler.h>
#include <sys/proc.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#if NPCI > 0
#include <machine/bus_memio.h>
#endif
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/clock.h>
#include <machine/endian.h>
#include <sys/rman.h>
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
#include <dev/aic7xxx/aic7xxx.h>
#include <dev/aic7xxx/aicasm_insformat.h>
#include <aic7xxx_reg.h>
#include <aic7xxx_seq.h>
#include <sys/kernel.h>
#ifndef AHC_TMODE_ENABLE
#define AHC_TMODE_ENABLE 0
#endif
#define MAX(a,b) (((a) > (b)) ? (a) : (b))
#define MIN(a,b) (((a) < (b)) ? (a) : (b))
#define ALL_CHANNELS '\0'
#define ALL_TARGETS_MASK 0xFFFF
#define INITIATOR_WILDCARD (~0)
#define SIM_IS_SCSIBUS_B(ahc, sim) \
((sim) == ahc->sim_b)
#define SIM_CHANNEL(ahc, sim) \
(((sim) == ahc->sim_b) ? 'B' : 'A')
#define SIM_SCSI_ID(ahc, sim) \
(((sim) == ahc->sim_b) ? ahc->our_id_b : ahc->our_id)
#define SIM_PATH(ahc, sim) \
(((sim) == ahc->sim_b) ? ahc->path_b : ahc->path)
#define SCSIID_TARGET(ahc, scsiid) \
(((scsiid) & ((((ahc)->features & AHC_TWIN) != 0) ? TWIN_TID : TID)) \
>> TID_SHIFT)
#define SCSIID_OUR_ID(scsiid) \
((scsiid) & OID)
#define SCSIID_CHANNEL(ahc, scsiid) \
((((ahc)->features & AHC_TWIN) != 0) \
? ((((scsiid) & TWIN_CHNLB) != 0) ? 'B' : 'A') \
: 'A')
#define SCB_IS_SCSIBUS_B(ahc, scb) \
(SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid) == 'B')
#define SCB_GET_OUR_ID(scb) \
SCSIID_OUR_ID((scb)->hscb->scsiid)
#define SCB_GET_TARGET(ahc, scb) \
SCSIID_TARGET((ahc), (scb)->hscb->scsiid)
#define SCB_GET_CHANNEL(ahc, scb) \
SCSIID_CHANNEL(ahc, (scb)->hscb->scsiid)
#define SCB_GET_LUN(scb) \
((scb)->hscb->lun)
#define SCB_GET_TARGET_OFFSET(ahc, scb) \
(SCB_GET_TARGET(ahc, scb) + (SCB_IS_SCSIBUS_B(ahc, scb) ? 8 : 0))
#define SCB_GET_TARGET_MASK(ahc, scb) \
(0x01 << (SCB_GET_TARGET_OFFSET(ahc, scb)))
#define TCL_TARGET_OFFSET(tcl) \
((((tcl) >> 4) & TID) >> 4)
#define TCL_LUN(tcl) \
(tcl & (AHC_NUM_LUNS - 1))
#define BUILD_TCL(scsiid, lun) \
((lun) | (((scsiid) & TID) << 4))
#define BUILD_SCSIID(ahc, sim, target_id, our_id) \
((((target_id) << TID_SHIFT) & TID) | (our_id) \
| (SIM_IS_SCSIBUS_B(ahc, sim) ? TWIN_CHNLB : 0))
#define ccb_scb_ptr spriv_ptr0
#define ccb_ahc_ptr spriv_ptr1
char *ahc_chip_names[] =
{
"NONE",
"aic7770",
"aic7850",
"aic7855",
"aic7859",
"aic7860",
"aic7870",
"aic7880",
"aic7895",
"aic7890/91",
"aic7896/97",
"aic7892",
"aic7899"
};
typedef enum {
ROLE_UNKNOWN,
ROLE_INITIATOR,
ROLE_TARGET
} role_t;
struct ahc_devinfo {
int our_scsiid;
int target_offset;
uint16_t target_mask;
uint8_t target;
uint8_t lun;
char channel;
role_t role; /*
* Only guaranteed to be correct if not
* in the busfree state.
*/
};
typedef enum {
SEARCH_COMPLETE,
SEARCH_COUNT,
SEARCH_REMOVE
} ahc_search_action;
#ifdef AHC_DEBUG
static int ahc_debug = AHC_DEBUG;
#endif
#if NPCI > 0
void ahc_pci_intr(struct ahc_softc *ahc);
#endif
static int ahcinitscbdata(struct ahc_softc *ahc);
static void ahcfiniscbdata(struct ahc_softc *ahc);
static bus_dmamap_callback_t ahcdmamapcb;
#if UNUSED
static void ahc_dump_targcmd(struct target_cmd *cmd);
#endif
static void ahc_shutdown(void *arg, int howto);
static cam_status
ahc_find_tmode_devs(struct ahc_softc *ahc,
struct cam_sim *sim, union ccb *ccb,
struct tmode_tstate **tstate,
struct tmode_lstate **lstate,
int notfound_failure);
static void ahc_action(struct cam_sim *sim, union ccb *ccb);
static void ahc_async(void *callback_arg, uint32_t code,
struct cam_path *path, void *arg);
static void ahc_execute_scb(void *arg, bus_dma_segment_t *dm_segs,
int nsegments, int error);
static void ahc_poll(struct cam_sim *sim);
static void ahc_setup_data(struct ahc_softc *ahc,
struct ccb_scsiio *csio, struct scb *scb);
static void ahc_freeze_devq(struct ahc_softc *ahc, struct cam_path *path);
static void ahcallocscbs(struct ahc_softc *ahc);
#if UNUSED
static void ahc_scb_devinfo(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
struct scb *scb);
#endif
static void ahc_fetch_devinfo(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo);
static void ahc_compile_devinfo(struct ahc_devinfo *devinfo, u_int our_id,
u_int target, u_int lun, char channel,
role_t role);
static u_int ahc_rem_wscb(struct ahc_softc *ahc, u_int scbpos, u_int prev);
static void ahc_done(struct ahc_softc *ahc, struct scb *scbp);
static struct tmode_tstate *
ahc_alloc_tstate(struct ahc_softc *ahc,
u_int scsi_id, char channel);
static void ahc_free_tstate(struct ahc_softc *ahc,
u_int scsi_id, char channel, int force);
static void ahc_handle_en_lun(struct ahc_softc *ahc, struct cam_sim *sim,
union ccb *ccb);
static void ahc_update_scsiid(struct ahc_softc *ahc, u_int targid_mask);
static int ahc_handle_target_cmd(struct ahc_softc *ahc,
struct target_cmd *cmd);
static void ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat);
static void ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat);
static void ahc_build_transfer_msg(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo);
static void ahc_setup_initiator_msgout(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
struct scb *scb);
static void ahc_setup_target_msgin(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo);
static int ahc_handle_msg_reject(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo);
static void ahc_clear_msg_state(struct ahc_softc *ahc);
static void ahc_handle_message_phase(struct ahc_softc *ahc,
struct cam_path *path);
static int ahc_sent_msg(struct ahc_softc *ahc, u_int msgtype, int full);
typedef enum {
MSGLOOP_IN_PROG,
MSGLOOP_MSGCOMPLETE,
MSGLOOP_TERMINATED
} msg_loop_stat;
static int ahc_parse_msg(struct ahc_softc *ahc, struct cam_path *path,
struct ahc_devinfo *devinfo);
static void ahc_handle_ign_wide_residue(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo);
static void ahc_handle_devreset(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
cam_status status, ac_code acode,
char *message,
int verbose_level);
#ifdef AHC_DUMP_SEQ
static void ahc_dumpseq(struct ahc_softc *ahc);
#endif
static void ahc_loadseq(struct ahc_softc *ahc);
static int ahc_check_patch(struct ahc_softc *ahc,
struct patch **start_patch,
u_int start_instr, u_int *skip_addr);
static void ahc_download_instr(struct ahc_softc *ahc,
u_int instrptr, uint8_t *dconsts);
static int ahc_match_scb(struct ahc_softc *ahc, struct scb *scb,
int target, char channel, int lun, u_int tag,
role_t role);
#ifdef AHC_DEBUG
static void ahc_print_scb(struct scb *scb);
#endif
static int ahc_search_qinfifo(struct ahc_softc *ahc, int target,
char channel, int lun, u_int tag,
role_t role, uint32_t status,
ahc_search_action action);
static void ahc_abort_ccb(struct ahc_softc *ahc, struct cam_sim *sim,
union ccb *ccb);
static int ahc_reset_channel(struct ahc_softc *ahc, char channel,
int initiate_reset);
static int ahc_abort_scbs(struct ahc_softc *ahc, int target,
char channel, int lun, u_int tag, role_t role,
uint32_t status);
static int ahc_search_disc_list(struct ahc_softc *ahc, int target,
char channel, int lun, u_int tag,
int stop_on_first, int remove,
int save_state);
static u_int ahc_rem_scb_from_disc_list(struct ahc_softc *ahc,
u_int prev, u_int scbptr);
static void ahc_add_curscb_to_free_list(struct ahc_softc *ahc);
static void ahc_clear_intstat(struct ahc_softc *ahc);
static void ahc_reset_current_bus(struct ahc_softc *ahc);
static struct ahc_syncrate *
ahc_devlimited_syncrate(struct ahc_softc *ahc, u_int *period,
u_int *ppr_options);
static struct ahc_syncrate *
ahc_find_syncrate(struct ahc_softc *ahc, u_int *period,
u_int *ppr_options, u_int maxsync);
static u_int ahc_find_period(struct ahc_softc *ahc, u_int scsirate,
u_int maxsync);
static void ahc_validate_offset(struct ahc_softc *ahc,
struct ahc_syncrate *syncrate,
u_int *offset, int wide);
static void ahc_validate_width(struct ahc_softc *ahc, u_int *bus_width);
static void ahc_update_target_msg_request(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
struct ahc_initiator_tinfo *tinfo,
int force, int paused);
static int ahc_create_path(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
struct cam_path **path);
static void ahc_set_syncrate(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
struct cam_path *path,
struct ahc_syncrate *syncrate,
u_int period, u_int offset,
u_int ppr_options, u_int type,
int paused);
static void ahc_set_width(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
struct cam_path *path, u_int width, u_int type,
int paused);
static void ahc_set_tags(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
int enable);
static void ahc_construct_sdtr(struct ahc_softc *ahc,
u_int period, u_int offset);
static void ahc_construct_wdtr(struct ahc_softc *ahc, u_int bus_width);
static void ahc_construct_ppr(struct ahc_softc *ahc, u_int period,
u_int offset, u_int bus_width,
u_int ppr_options);
static __inline int ahc_check_residual(struct scb *scb);
static void ahc_calc_residual(struct scb *scb);
static void ahc_update_pending_syncrates(struct ahc_softc *ahc);
static void ahc_set_recoveryscb(struct ahc_softc *ahc, struct scb *scb);
static timeout_t
ahc_timeout;
static void ahc_queue_lstate_event(struct ahc_softc *ahc,
struct tmode_lstate *lstate,
u_int initiator_id, u_int event_type,
u_int event_arg);
static void ahc_send_lstate_events(struct ahc_softc *ahc,
struct tmode_lstate *lstate);
static void restart_sequencer(struct ahc_softc *ahc);
static u_int ahc_index_busy_tcl(struct ahc_softc *ahc,
u_int tcl, int unbusy);
static __inline void ahc_freeze_ccb(union ccb* ccb);
static __inline cam_status ahc_ccb_status(union ccb* ccb);
static __inline void ahcsetccbstatus(union ccb* ccb,
cam_status status);
static void ahc_run_untagged_queues(struct ahc_softc *);
static void ahc_run_untagged_queue(struct ahc_softc *,
struct scb_tailq *);
static void ahc_run_tqinfifo(struct ahc_softc *ahc, int paused);
static void ahc_run_qoutfifo(struct ahc_softc *ahc);
static __inline struct ahc_initiator_tinfo *
ahc_fetch_transinfo(struct ahc_softc *ahc,
char channel,
u_int our_id, u_int target,
struct tmode_tstate **tstate);
static __inline struct ahc_dma_seg *
ahc_sg_bus_to_virt(struct scb *scb,
uint32_t sg_busaddr);
static __inline uint32_t
ahc_sg_virt_to_bus(struct scb *scb,
struct ahc_dma_seg *sg);
static __inline void ahc_queue_scb(struct ahc_softc *ahc,
struct scb *scb);
static void ahcfreescb(struct ahc_softc *ahc, struct scb *scb);
static __inline struct scb *ahcgetscb(struct ahc_softc *ahc);
static __inline void ahc_freeze_untagged_queues(struct ahc_softc *ahc);
static __inline void ahc_release_untagged_queues(struct ahc_softc *ahc);
static __inline uint32_t
ahc_hscb_busaddr(struct ahc_softc *ahc, u_int index)
{
return (ahc->scb_data->hscb_busaddr
+ (sizeof(struct hardware_scb) * index));
}
#define AHC_BUSRESET_DELAY 250 /* Reset delay in us */
/*
* Restart the sequencer program from address zero
*/
static void
restart_sequencer(struct ahc_softc *ahc)
{
u_int i;
pause_sequencer(ahc);
/*
* Everytime we restart the sequencer, there
* is the possiblitity that we have restarted
* within a three instruction window where an
* SCB has been marked free but has not made it
* onto the free list. Since SCSI events(bus reset,
* unexpected bus free) will always freeze the
* sequencer, we cannot close this window. To
* avoid losing an SCB, we reconsitute the free
* list every time we restart the sequencer.
*/
ahc_outb(ahc, FREE_SCBH, SCB_LIST_NULL);
for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
ahc_outb(ahc, SCBPTR, i);
if (ahc_inb(ahc, SCB_TAG) == SCB_LIST_NULL) {
ahc_add_curscb_to_free_list(ahc);
}
}
ahc_outb(ahc, SEQCTL, FASTMODE|SEQRESET);
unpause_sequencer(ahc);
}
static u_int
ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl, int unbusy)
{
u_int scbid;
u_int target_offset;
if ((ahc->features & AHC_SCB_BTT) != 0) {
u_int saved_scbptr;
saved_scbptr = ahc_inb(ahc, SCBPTR);
ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
scbid = ahc_inb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl));
if (unbusy)
ahc_outb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl),
SCB_LIST_NULL);
ahc_outb(ahc, SCBPTR, saved_scbptr);
} else {
target_offset = TCL_TARGET_OFFSET(tcl);
scbid = ahc_inb(ahc, BUSY_TARGETS + target_offset);
if (unbusy)
ahc_outb(ahc, BUSY_TARGETS + target_offset,
SCB_LIST_NULL);
}
return (scbid);
}
static __inline int
ahc_check_residual(struct scb *scb)
{
struct status_pkt *sp;
sp = &scb->hscb->shared_data.status;
if ((scb->hscb->sgptr & SG_RESID_VALID) != 0)
return (1);
return (0);
}
static __inline void
ahc_freeze_ccb(union ccb* ccb)
{
if ((ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
ccb->ccb_h.status |= CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
}
}
static __inline cam_status
ahc_ccb_status(union ccb* ccb)
{
return (ccb->ccb_h.status & CAM_STATUS_MASK);
}
static __inline void
ahcsetccbstatus(union ccb* ccb, cam_status status)
{
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= status;
}
static __inline struct ahc_initiator_tinfo *
ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id,
u_int remote_id, struct tmode_tstate **tstate)
{
/*
* Transfer data structures are stored from the perspective
* of the target role. Since the parameters for a connection
* in the initiator role to a given target are the same as
* when the roles are reversed, we pretend we are the target.
*/
if (channel == 'B')
our_id += 8;
*tstate = ahc->enabled_targets[our_id];
return (&(*tstate)->transinfo[remote_id]);
}
static __inline struct ahc_dma_seg *
ahc_sg_bus_to_virt(struct scb *scb, uint32_t sg_busaddr)
{
int sg_index;
sg_index = (sg_busaddr - scb->sg_list_phys)/sizeof(struct ahc_dma_seg);
/* sg_list_phys points to entry 1, not 0 */
sg_index++;
return (&scb->sg_list[sg_index]);
}
static __inline uint32_t
ahc_sg_virt_to_bus(struct scb *scb, struct ahc_dma_seg *sg)
{
int sg_index;
/* sg_list_phys points to entry 1, not 0 */
sg_index = sg - &scb->sg_list[1];
return (scb->sg_list_phys + (sg_index * sizeof(*scb->sg_list)));
}
static __inline void
ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
{
ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
if ((ahc->features & AHC_QUEUE_REGS) != 0) {
ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
} else {
pause_sequencer(ahc);
ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
unpause_sequencer(ahc);
}
}
static __inline void
ahc_freeze_untagged_queues(struct ahc_softc *ahc)
{
if ((ahc->features & AHC_SCB_BTT) == 0)
ahc->untagged_queue_lock++;
}
static __inline void
ahc_release_untagged_queues(struct ahc_softc *ahc)
{
if ((ahc->features & AHC_SCB_BTT) == 0) {
ahc->untagged_queue_lock--;
if (ahc->untagged_queue_lock == 0)
ahc_run_untagged_queues(ahc);
}
}
static void
ahc_run_untagged_queues(struct ahc_softc *ahc)
{
int i;
for (i = 0; i < 16; i++)
ahc_run_untagged_queue(ahc, &ahc->untagged_queues[i]);
}
static void
ahc_run_untagged_queue(struct ahc_softc *ahc, struct scb_tailq *queue)
{
struct scb *scb;
if (ahc->untagged_queue_lock != 0)
return;
if ((scb = TAILQ_FIRST(queue)) != NULL
&& (scb->flags & SCB_ACTIVE) == 0) {
scb->flags |= SCB_ACTIVE;
ahc_queue_scb(ahc, scb);
}
}
static void
ahc_run_tqinfifo(struct ahc_softc *ahc, int paused)
{
struct target_cmd *cmd;
while ((cmd = &ahc->targetcmds[ahc->tqinfifonext])->cmd_valid != 0) {
/*
* Only advance through the queue if we
* have the resources to process the command.
*/
if (ahc_handle_target_cmd(ahc, cmd) != 0)
break;
ahc->tqinfifonext++;
cmd->cmd_valid = 0;
/*
* Lazily update our position in the target mode incomming
* command queue as seen by the sequencer.
*/
if ((ahc->tqinfifonext & (HOST_TQINPOS - 1)) == 1) {
if ((ahc->features & AHC_HS_MAILBOX) != 0) {
u_int hs_mailbox;
hs_mailbox = ahc_inb(ahc, HS_MAILBOX);
hs_mailbox &= ~HOST_TQINPOS;
hs_mailbox |= ahc->tqinfifonext & HOST_TQINPOS;
ahc_outb(ahc, HS_MAILBOX, hs_mailbox);
} else {
if (!paused)
pause_sequencer(ahc);
ahc_outb(ahc, KERNEL_TQINPOS,
ahc->tqinfifonext & HOST_TQINPOS);
if (!paused)
unpause_sequencer(ahc);
}
}
}
}
static void
ahc_run_qoutfifo(struct ahc_softc *ahc)
{
struct scb *scb;
u_int scb_index;
while (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL) {
scb_index = ahc->qoutfifo[ahc->qoutfifonext];
ahc->qoutfifo[ahc->qoutfifonext++] = SCB_LIST_NULL;
scb = &ahc->scb_data->scbarray[scb_index];
if (scb_index >= ahc->scb_data->numscbs
|| (scb->flags & SCB_ACTIVE) == 0) {
printf("%s: WARNING no command for scb %d "
"(cmdcmplt)\nQOUTPOS = %d\n",
ahc_name(ahc), scb_index,
ahc->qoutfifonext - 1);
continue;
}
/*
* Save off the residual
* if there is one.
*/
if (ahc_check_residual(scb) != 0)
ahc_calc_residual(scb);
else
scb->ccb->csio.resid = 0;
ahc_done(ahc, scb);
}
}
/*
* Return an SCB resource to the free list.
*/
static void
ahcfreescb(struct ahc_softc *ahc, struct scb *scb)
{
struct hardware_scb *hscb;
int opri;
hscb = scb->hscb;
opri = splcam();
if ((ahc->flags & AHC_RESOURCE_SHORTAGE) != 0
&& (scb->ccb->ccb_h.status & CAM_RELEASE_SIMQ) == 0) {
scb->ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
ahc->flags &= ~AHC_RESOURCE_SHORTAGE;
}
/* Clean up for the next user */
scb->flags = SCB_FREE;
hscb->control = 0;
SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
splx(opri);
}
/*
* Get a free scb. If there are none, see if we can allocate a new SCB.
*/
static __inline struct scb *
ahcgetscb(struct ahc_softc *ahc)
{
struct scb *scbp;
int opri;
opri = splcam();
if ((scbp = SLIST_FIRST(&ahc->scb_data->free_scbs))) {
SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
} else {
ahcallocscbs(ahc);
scbp = SLIST_FIRST(&ahc->scb_data->free_scbs);
if (scbp != NULL)
SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
}
splx(opri);
return (scbp);
}
char *
ahc_name(struct ahc_softc *ahc)
{
static char name[10];
snprintf(name, sizeof(name), "ahc%d", ahc->unit);
return (name);
}
#ifdef AHC_DEBUG
static void
ahc_print_scb(struct scb *scb)
{
int i;
struct hardware_scb *hscb = scb->hscb;
printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
scb,
hscb->control,
hscb->scsiid,
hscb->lun,
hscb->cdb_len);
i = 0;
printf("Shared Data: %#02x %#02x %#02x %#02x\n",
hscb->shared_data.cdb[i++],
hscb->shared_data.cdb[i++],
hscb->shared_data.cdb[i++],
hscb->shared_data.cdb[i++]);
printf(" %#02x %#02x %#02x %#02x\n",
hscb->shared_data.cdb[i++],
hscb->shared_data.cdb[i++],
hscb->shared_data.cdb[i++],
hscb->shared_data.cdb[i++]);
printf(" %#02x %#02x %#02x %#02x\n",
hscb->shared_data.cdb[i++],
hscb->shared_data.cdb[i++],
hscb->shared_data.cdb[i++],
hscb->shared_data.cdb[i++]);
printf(" dataptr:%#x datacnt:%#x sgptr:%#x tag:%#x\n",
hscb->dataptr,
hscb->datacnt,
hscb->sgptr,
hscb->tag);
if (scb->sg_count > 0) {
for (i = 0; i < scb->sg_count; i++) {
printf("sg[%d] - Addr 0x%x : Length %d\n",
i,
scb->sg_list[i].addr,
scb->sg_list[i].len);
}
}
}
#endif
static struct {
uint8_t errno;
char *errmesg;
} hard_error[] = {
{ ILLHADDR, "Illegal Host Access" },
{ ILLSADDR, "Illegal Sequencer Address referrenced" },
{ ILLOPCODE, "Illegal Opcode in sequencer program" },
{ SQPARERR, "Sequencer Parity Error" },
{ DPARERR, "Data-path Parity Error" },
{ MPARERR, "Scratch or SCB Memory Parity Error" },
{ PCIERRSTAT, "PCI Error detected" },
{ CIOPARERR, "CIOBUS Parity Error" },
};
static const int num_errors = sizeof(hard_error)/sizeof(hard_error[0]);
static struct {
uint8_t phase;
uint8_t mesg_out; /* Message response to parity errors */
char *phasemsg;
} phase_table[] = {
{ P_DATAOUT, MSG_NOOP, "in Data-out phase" },
{ P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" },
{ P_COMMAND, MSG_NOOP, "in Command phase" },
{ P_MESGOUT, MSG_NOOP, "in Message-out phase" },
{ P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" },
{ P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" },
{ P_BUSFREE, MSG_NOOP, "while idle" },
{ 0, MSG_NOOP, "in unknown phase" }
};
static const u_int num_phases =
(sizeof(phase_table)/sizeof(phase_table[0])) - 1;
/*
* Valid SCSIRATE values. (p. 3-17)
* Provides a mapping of tranfer periods in ns to the proper value to
* stick in the scsiscfr reg to use that transfer rate.
*/
#define AHC_SYNCRATE_DT 0
#define AHC_SYNCRATE_ULTRA2 1
#define AHC_SYNCRATE_ULTRA 3
#define AHC_SYNCRATE_FAST 6
static struct ahc_syncrate ahc_syncrates[] = {
/* ultra2 fast/ultra period rate */
{ 0x42, 0x000, 9, "80.0" },
{ 0x03, 0x000, 10, "40.0" },
{ 0x04, 0x000, 11, "33.0" },
{ 0x05, 0x100, 12, "20.0" },
{ 0x06, 0x110, 15, "16.0" },
{ 0x07, 0x120, 18, "13.4" },
{ 0x08, 0x000, 25, "10.0" },
{ 0x19, 0x010, 31, "8.0" },
{ 0x1a, 0x020, 37, "6.67" },
{ 0x1b, 0x030, 43, "5.7" },
{ 0x1c, 0x040, 50, "5.0" },
{ 0x00, 0x050, 56, "4.4" },
{ 0x00, 0x060, 62, "4.0" },
{ 0x00, 0x070, 68, "3.6" },
{ 0x00, 0x000, 0, NULL }
};
void
ahc_init_probe_config(struct ahc_probe_config *probe_config)
{
probe_config->description = NULL;
probe_config->channel = 'A';
probe_config->channel_b = 'B';
probe_config->chip = AHC_NONE;
probe_config->features = AHC_FENONE;
probe_config->bugs = AHC_BUGNONE;
probe_config->flags = AHC_FNONE;
}
/*
* Allocate a controller structure for a new device and initialize it.
*/
struct ahc_softc *
ahc_alloc(device_t dev, struct resource *regs, int regs_type, int regs_id,
bus_dma_tag_t parent_dmat, struct ahc_probe_config *config,
struct scb_data *scb_data)
{
/*
* find unit and check we have that many defined
*/
struct ahc_softc *ahc;
size_t alloc_size;
int i;
/*
* Allocate a storage area for us.
*/
if (scb_data == NULL)
/*
* We are not sharing SCB space with another controller
* so allocate our own SCB data space.
*/
alloc_size = sizeof(struct full_ahc_softc);
else
alloc_size = sizeof(struct ahc_softc);
ahc = malloc(alloc_size, M_DEVBUF, M_NOWAIT);
if (!ahc) {
device_printf(dev, "cannot malloc softc!\n");
return NULL;
}
bzero(ahc, alloc_size);
LIST_INIT(&ahc->pending_ccbs);
ahc->device = dev;
ahc->unit = device_get_unit(dev);
ahc->regs_res_type = regs_type;
ahc->regs_res_id = regs_id;
ahc->regs = regs;
ahc->tag = rman_get_bustag(regs);
ahc->bsh = rman_get_bushandle(regs);
ahc->parent_dmat = parent_dmat;
ahc->chip = config->chip;
ahc->features = config->features;
ahc->bugs = config->bugs;
ahc->flags = config->flags;
ahc->channel = config->channel;
for (i = 0; i < 16; i++)
TAILQ_INIT(&ahc->untagged_queues[i]);
if (scb_data == NULL) {
struct full_ahc_softc* full_softc = (struct full_ahc_softc*)ahc;
ahc->scb_data = &full_softc->scb_data_storage;
} else
ahc->scb_data = scb_data;
ahc->unpause = (ahc_inb(ahc, HCNTRL) & IRQMS) | INTEN;
/* The IRQMS bit is only valid on VL and EISA chips */
if ((ahc->chip & AHC_PCI) != 0)
ahc->unpause &= ~IRQMS;
ahc->pause = ahc->unpause | PAUSE;
return (ahc);
}
void
ahc_free(ahc)
struct ahc_softc *ahc;
{
ahcfiniscbdata(ahc);
switch (ahc->init_level) {
case 3:
bus_dmamap_unload(ahc->shared_data_dmat,
ahc->shared_data_dmamap);
case 2:
bus_dmamem_free(ahc->shared_data_dmat, ahc->qoutfifo,
ahc->shared_data_dmamap);
bus_dmamap_destroy(ahc->shared_data_dmat,
ahc->shared_data_dmamap);
case 1:
bus_dma_tag_destroy(ahc->buffer_dmat);
break;
}
if (ahc->regs != NULL)
bus_release_resource(ahc->device, ahc->regs_res_type,
ahc->regs_res_id, ahc->regs);
if (ahc->irq != NULL)
bus_release_resource(ahc->device, ahc->irq_res_type,
0, ahc->irq);
free(ahc, M_DEVBUF);
return;
}
static int
ahcinitscbdata(struct ahc_softc *ahc)
{
struct scb_data *scb_data;
int i;
scb_data = ahc->scb_data;
SLIST_INIT(&scb_data->free_scbs);
SLIST_INIT(&scb_data->sg_maps);
/* Allocate SCB resources */
scb_data->scbarray =
(struct scb *)malloc(sizeof(struct scb) * AHC_SCB_MAX,
M_DEVBUF, M_NOWAIT);
if (scb_data->scbarray == NULL)
return (ENOMEM);
bzero(scb_data->scbarray, sizeof(struct scb) * AHC_SCB_MAX);
/* Determine the number of hardware SCBs and initialize them */
scb_data->maxhscbs = ahc_probe_scbs(ahc);
/* SCB 0 heads the free list */
ahc_outb(ahc, FREE_SCBH, 0);
for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
ahc_outb(ahc, SCBPTR, i);
/* Clear the control byte. */
ahc_outb(ahc, SCB_CONTROL, 0);
/* Set the next pointer */
ahc_outb(ahc, SCB_NEXT, i+1);
/* Make the tag number invalid */
ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL);
}
/* Make sure that the last SCB terminates the free list */
ahc_outb(ahc, SCBPTR, i-1);
ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL);
/* Ensure we clear the 0 SCB's control byte. */
ahc_outb(ahc, SCBPTR, 0);
ahc_outb(ahc, SCB_CONTROL, 0);
scb_data->maxhscbs = i;
if (ahc->scb_data->maxhscbs == 0)
panic("%s: No SCB space found", ahc_name(ahc));
/*
* Create our DMA tags. These tags define the kinds of device
* accessible memory allocations and memory mappings we will
* need to perform during normal operation.
*
* Unless we need to further restrict the allocation, we rely
* on the restrictions of the parent dmat, hence the common
* use of MAXADDR and MAXSIZE.
*/
/* DMA tag for our hardware scb structures */
if (bus_dma_tag_create(ahc->parent_dmat, /*alignment*/1, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
AHC_SCB_MAX * sizeof(struct hardware_scb),
/*nsegments*/1,
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
/*flags*/0, &scb_data->hscb_dmat) != 0) {
goto error_exit;
}
scb_data->init_level++;
/* Allocation for our ccbs */
if (bus_dmamem_alloc(scb_data->hscb_dmat, (void **)&scb_data->hscbs,
BUS_DMA_NOWAIT, &scb_data->hscb_dmamap) != 0) {
goto error_exit;
}
scb_data->init_level++;
/* And permanently map them */
bus_dmamap_load(scb_data->hscb_dmat, scb_data->hscb_dmamap,
scb_data->hscbs,
AHC_SCB_MAX * sizeof(struct hardware_scb),
ahcdmamapcb, &scb_data->hscb_busaddr, /*flags*/0);
scb_data->init_level++;
/* DMA tag for our sense buffers */
if (bus_dma_tag_create(ahc->parent_dmat, /*alignment*/1, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
AHC_SCB_MAX * sizeof(struct scsi_sense_data),
/*nsegments*/1,
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
/*flags*/0, &scb_data->sense_dmat) != 0) {
goto error_exit;
}
scb_data->init_level++;
/* Allocate them */
if (bus_dmamem_alloc(scb_data->sense_dmat, (void **)&scb_data->sense,
BUS_DMA_NOWAIT, &scb_data->sense_dmamap) != 0) {
goto error_exit;
}
scb_data->init_level++;
/* And permanently map them */
bus_dmamap_load(scb_data->sense_dmat, scb_data->sense_dmamap,
scb_data->sense,
AHC_SCB_MAX * sizeof(struct scsi_sense_data),
ahcdmamapcb, &scb_data->sense_busaddr, /*flags*/0);
scb_data->init_level++;
/* DMA tag for our S/G structures. We allocate in page sized chunks */
if (bus_dma_tag_create(ahc->parent_dmat, /*alignment*/1, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
PAGE_SIZE, /*nsegments*/1,
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
/*flags*/0, &scb_data->sg_dmat) != 0) {
goto error_exit;
}
scb_data->init_level++;
/* Perform initial CCB allocation */
bzero(scb_data->hscbs, AHC_SCB_MAX * sizeof(struct hardware_scb));
ahcallocscbs(ahc);
if (scb_data->numscbs == 0) {
printf("%s: ahc_init_scb_data - "
"Unable to allocate initial scbs\n",
ahc_name(ahc));
goto error_exit;
}
/*
* Note that we were successfull
*/
return 0;
error_exit:
return ENOMEM;
}
static void
ahcfiniscbdata(struct ahc_softc *ahc)
{
struct scb_data *scb_data;
scb_data = ahc->scb_data;
switch (scb_data->init_level) {
default:
case 7:
{
struct sg_map_node *sg_map;
while ((sg_map = SLIST_FIRST(&scb_data->sg_maps))!= NULL) {
SLIST_REMOVE_HEAD(&scb_data->sg_maps, links);
bus_dmamap_unload(scb_data->sg_dmat,
sg_map->sg_dmamap);
bus_dmamem_free(scb_data->sg_dmat, sg_map->sg_vaddr,
sg_map->sg_dmamap);
free(sg_map, M_DEVBUF);
}
bus_dma_tag_destroy(scb_data->sg_dmat);
}
case 6:
bus_dmamap_unload(scb_data->sense_dmat,
scb_data->sense_dmamap);
case 5:
bus_dmamem_free(scb_data->sense_dmat, scb_data->sense,
scb_data->sense_dmamap);
bus_dmamap_destroy(scb_data->sense_dmat,
scb_data->sense_dmamap);
case 4:
bus_dma_tag_destroy(scb_data->sense_dmat);
case 3:
bus_dmamap_unload(scb_data->hscb_dmat, scb_data->hscb_dmamap);
case 2:
bus_dmamem_free(scb_data->hscb_dmat, scb_data->hscbs,
scb_data->hscb_dmamap);
bus_dmamap_destroy(scb_data->hscb_dmat, scb_data->hscb_dmamap);
case 1:
bus_dma_tag_destroy(scb_data->hscb_dmat);
break;
}
if (scb_data->scbarray != NULL)
free(scb_data->scbarray, M_DEVBUF);
}
static void
ahcdmamapcb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
bus_addr_t *baddr;
baddr = (bus_addr_t *)arg;
*baddr = segs->ds_addr;
}
int
ahc_reset(struct ahc_softc *ahc)
{
u_int sblkctl;
u_int sxfrctl1;
int wait;
#ifdef AHC_DUMP_SEQ
if (ahc->init_level == 0)
ahc_dumpseq(ahc);
#endif
/* Cache STPWEN. It is cleared by a chip reset */
pause_sequencer(ahc);
sxfrctl1 = ahc_inb(ahc, SXFRCTL1) & STPWEN;
ahc_outb(ahc, HCNTRL, CHIPRST | ahc->pause);
/*
* Ensure that the reset has finished
*/
wait = 1000;
do {
DELAY(1000);
} while (--wait && !(ahc_inb(ahc, HCNTRL) & CHIPRSTACK));
if (wait == 0) {
printf("%s: WARNING - Failed chip reset! "
"Trying to initialize anyway.\n", ahc_name(ahc));
}
ahc_outb(ahc, HCNTRL, ahc->pause);
/*
* Reload sxfrctl1 with the cached value of STPWEN
* to minimize the amount of time our terminators
* are disabled. If a BIOS has initialized the chip,
* then sxfrctl1 will have the correct value. If
* not, STPWEN will be false (the value after a POST)
* and this action will be harmless.
*
* We must always initialize STPWEN to 1 before we
* restore the saved value. STPWEN is initialized
* to a tri-state condition which is only be cleared
* by turning it on.
*/
ahc_outb(ahc, SXFRCTL1, sxfrctl1|STPWEN);
ahc_outb(ahc, SXFRCTL1, sxfrctl1);
/* Determine channel configuration */
sblkctl = ahc_inb(ahc, SBLKCTL) & (SELBUSB|SELWIDE);
/* No Twin Channel PCI cards */
if ((ahc->chip & AHC_PCI) != 0)
sblkctl &= ~SELBUSB;
switch (sblkctl) {
case 0:
/* Single Narrow Channel */
break;
case 2:
/* Wide Channel */
ahc->features |= AHC_WIDE;
break;
case 8:
/* Twin Channel */
ahc->features |= AHC_TWIN;
break;
default:
printf(" Unsupported adapter type. Ignoring\n");
return(-1);
}
return (0);
}
/*
* Called when we have an active connection to a target on the bus,
* this function finds the nearest syncrate to the input period limited
* by the capabilities of the bus connectivity of the target.
*/
static struct ahc_syncrate *
ahc_devlimited_syncrate(struct ahc_softc *ahc, u_int *period,
u_int *ppr_options) {
u_int maxsync;
if ((ahc->features & AHC_ULTRA2) != 0) {
if ((ahc_inb(ahc, SBLKCTL) & ENAB40) != 0
&& (ahc_inb(ahc, SSTAT2) & EXP_ACTIVE) == 0) {
maxsync = AHC_SYNCRATE_DT;
} else {
maxsync = AHC_SYNCRATE_ULTRA;
/* Can't do DT on an SE bus */
*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
}
} else if ((ahc->features & AHC_ULTRA) != 0) {
maxsync = AHC_SYNCRATE_ULTRA;
} else {
maxsync = AHC_SYNCRATE_FAST;
}
return (ahc_find_syncrate(ahc, period, ppr_options, maxsync));
}
/*
* Look up the valid period to SCSIRATE conversion in our table.
* Return the period and offset that should be sent to the target
* if this was the beginning of an SDTR.
*/
static struct ahc_syncrate *
ahc_find_syncrate(struct ahc_softc *ahc, u_int *period,
u_int *ppr_options, u_int maxsync)
{
struct ahc_syncrate *syncrate;
if ((ahc->features & AHC_DT) == 0)
*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
for (syncrate = &ahc_syncrates[maxsync];
syncrate->rate != NULL;
syncrate++) {
/*
* The Ultra2 table doesn't go as low
* as for the Fast/Ultra cards.
*/
if ((ahc->features & AHC_ULTRA2) != 0
&& (syncrate->sxfr_u2 == 0))
break;
/* Skip any DT entries if DT is not available */
if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0
&& (syncrate->sxfr_u2 & DT_SXFR) != 0)
continue;
if (*period <= syncrate->period) {
/*
* When responding to a target that requests
* sync, the requested rate may fall between
* two rates that we can output, but still be
* a rate that we can receive. Because of this,
* we want to respond to the target with
* the same rate that it sent to us even
* if the period we use to send data to it
* is lower. Only lower the response period
* if we must.
*/
if (syncrate == &ahc_syncrates[maxsync])
*period = syncrate->period;
/*
* At some speeds, we only support
* ST transfers.
*/
if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
break;
}
}
if ((*period == 0)
|| (syncrate->rate == NULL)
|| ((ahc->features & AHC_ULTRA2) != 0
&& (syncrate->sxfr_u2 == 0))) {
/* Use asynchronous transfers. */
*period = 0;
syncrate = NULL;
*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
}
return (syncrate);
}
static u_int
ahc_find_period(struct ahc_softc *ahc, u_int scsirate, u_int maxsync)
{
struct ahc_syncrate *syncrate;
if ((ahc->features & AHC_ULTRA2) != 0)
scsirate &= SXFR_ULTRA2;
else
scsirate &= SXFR;
syncrate = &ahc_syncrates[maxsync];
while (syncrate->rate != NULL) {
if ((ahc->features & AHC_ULTRA2) != 0) {
if (syncrate->sxfr_u2 == 0)
break;
else if (scsirate == (syncrate->sxfr_u2 & SXFR_ULTRA2))
return (syncrate->period);
} else if (scsirate == (syncrate->sxfr & SXFR)) {
return (syncrate->period);
}
syncrate++;
}
return (0); /* async */
}
static void
ahc_validate_offset(struct ahc_softc *ahc, struct ahc_syncrate *syncrate,
u_int *offset, int wide)
{
u_int maxoffset;
/* Limit offset to what we can do */
if (syncrate == NULL) {
maxoffset = 0;
} else if ((ahc->features & AHC_ULTRA2) != 0) {
maxoffset = MAX_OFFSET_ULTRA2;
} else {
if (wide)
maxoffset = MAX_OFFSET_16BIT;
else
maxoffset = MAX_OFFSET_8BIT;
}
*offset = MIN(*offset, maxoffset);
}
static void
ahc_validate_width(struct ahc_softc *ahc, u_int *bus_width)
{
switch (*bus_width) {
default:
if (ahc->features & AHC_WIDE) {
/* Respond Wide */
*bus_width = MSG_EXT_WDTR_BUS_16_BIT;
break;
}
/* FALLTHROUGH */
case MSG_EXT_WDTR_BUS_8_BIT:
bus_width = MSG_EXT_WDTR_BUS_8_BIT;
break;
}
}
static void
ahc_update_target_msg_request(struct ahc_softc *ahc,
struct ahc_devinfo *devinfo,
struct ahc_initiator_tinfo *tinfo,
int force, int paused)
{
u_int targ_msg_req_orig;
targ_msg_req_orig = ahc->targ_msg_req;
if (tinfo->current.period != tinfo->goal.period
|| tinfo->current.width != tinfo->goal.width
|| tinfo->current.offset != tinfo->goal.offset
|| (force
&& (tinfo->goal.period != 0
|| tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT)))
ahc->targ_msg_req |= devinfo->target_mask;
else
ahc->targ_msg_req &= ~devinfo->target_mask;
if (ahc->targ_msg_req != targ_msg_req_orig) {
/* Update the message request bit for this target */
if (!paused)
pause_sequencer(ahc);
ahc_outb(ahc, TARGET_MSG_REQUEST,
ahc->targ_msg_req & 0xFF);
ahc_outb(ahc, TARGET_MSG_REQUEST + 1,
(ahc->targ_msg_req >> 8) & 0xFF);
if (!paused)
unpause_sequencer(ahc);
}
}
static int
ahc_create_path(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
struct cam_path **path)
{
path_id_t path_id;
if (devinfo->channel == 'B')
path_id = cam_sim_path(ahc->sim_b);
else
path_id = cam_sim_path(ahc->sim);
return (xpt_create_path(path, /*periph*/NULL,
path_id, devinfo->target,
devinfo->lun));
}
static void
ahc_set_syncrate(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
struct cam_path *path, struct ahc_syncrate *syncrate,
u_int period, u_int offset, u_int ppr_options,
u_int type, int paused)
{
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
u_int old_period;
u_int old_offset;
int active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE;
if (syncrate == NULL) {
period = 0;
offset = 0;
}
tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
devinfo->target, &tstate);
old_period = tinfo->current.period;
old_offset = tinfo->current.offset;
if ((type & AHC_TRANS_CUR) != 0
&& (old_period != period || old_offset != offset)) {
struct cam_path *path2;
u_int scsirate;
scsirate = tinfo->scsirate;
if ((ahc->features & AHC_ULTRA2) != 0) {
scsirate &= ~(SXFR_ULTRA2|SINGLE_EDGE|ENABLE_CRC);
if (syncrate != NULL) {
scsirate |= syncrate->sxfr_u2;
if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0)
scsirate |= ENABLE_CRC;
else
scsirate |= SINGLE_EDGE;
}
if (active)
ahc_outb(ahc, SCSIOFFSET, offset);
} else {
scsirate &= ~(SXFR|SOFS);
/*
* Ensure Ultra mode is set properly for
* this target.
*/
tstate->ultraenb &= ~devinfo->target_mask;
if (syncrate != NULL) {
if (syncrate->sxfr & ULTRA_SXFR) {
tstate->ultraenb |=
devinfo->target_mask;
}
scsirate |= syncrate->sxfr & SXFR;
scsirate |= offset & SOFS;
}
if (active) {
u_int sxfrctl0;
sxfrctl0 = ahc_inb(ahc, SXFRCTL0);
sxfrctl0 &= ~FAST20;
if (tstate->ultraenb & devinfo->target_mask)
sxfrctl0 |= FAST20;
ahc_outb(ahc, SXFRCTL0, sxfrctl0);
}
}
if (active)
ahc_outb(ahc, SCSIRATE, scsirate);
tinfo->scsirate = scsirate;
tinfo->current.period = period;
tinfo->current.offset = offset;
tinfo->current.ppr_options = ppr_options;
/* Update the syncrates in any pending scbs */
ahc_update_pending_syncrates(ahc);
/*
* If possible, tell the SCSI layer about the
* new transfer parameters.
*/
/* If possible, update the XPT's notion of our transfer rate */
path2 = NULL;
if (path == NULL) {
int error;
error = ahc_create_path(ahc, devinfo, &path2);
if (error == CAM_REQ_CMP)
path = path2;
else
path2 = NULL;
}
if (path != NULL) {
struct ccb_trans_settings neg;
neg.flags = CCB_TRANS_CURRENT_SETTINGS;
neg.sync_period = period;
neg.sync_offset = offset;
neg.valid = CCB_TRANS_SYNC_RATE_VALID
| CCB_TRANS_SYNC_OFFSET_VALID;
xpt_setup_ccb(&neg.ccb_h, path, /*priority*/1);
xpt_async(AC_TRANSFER_NEG, path, &neg);
}
if (path2 != NULL)
xpt_free_path(path2);
if (bootverbose) {
if (offset != 0) {
printf("%s: target %d synchronous at %sMHz%s, "
"offset = 0x%x\n", ahc_name(ahc),
devinfo->target, syncrate->rate,
(ppr_options & MSG_EXT_PPR_DT_REQ)
? " DT" : "", offset);
} else {
printf("%s: target %d using "
"asynchronous transfers\n",
ahc_name(ahc), devinfo->target);
}
}
}
if ((type & AHC_TRANS_GOAL) != 0) {
tinfo->goal.period = period;
tinfo->goal.offset = offset;
tinfo->goal.ppr_options = ppr_options;
}
if ((type & AHC_TRANS_USER) != 0) {
tinfo->user.period = period;
tinfo->user.offset = offset;
tinfo->user.ppr_options = ppr_options;
}
ahc_update_target_msg_request(ahc, devinfo, tinfo,
/*force*/FALSE,
paused);
}
static void
ahc_set_width(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
struct cam_path *path, u_int width, u_int type, int paused)
{
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
u_int oldwidth;
int active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE;
tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
devinfo->target, &tstate);
oldwidth = tinfo->current.width;
if ((type & AHC_TRANS_CUR) != 0 && oldwidth != width) {
struct cam_path *path2;
u_int scsirate;
scsirate = tinfo->scsirate;
scsirate &= ~WIDEXFER;
if (width == MSG_EXT_WDTR_BUS_16_BIT)
scsirate |= WIDEXFER;
tinfo->scsirate = scsirate;
if (active)
ahc_outb(ahc, SCSIRATE, scsirate);
tinfo->current.width = width;
/* If possible, update the XPT's notion of our transfer rate */
path2 = NULL;
if (path == NULL) {
int error;
error = ahc_create_path(ahc, devinfo, &path2);
if (error == CAM_REQ_CMP)
path = path2;
else
path2 = NULL;
}
if (path != NULL) {
struct ccb_trans_settings neg;
neg.flags = CCB_TRANS_CURRENT_SETTINGS;
neg.bus_width = width;
neg.valid = CCB_TRANS_BUS_WIDTH_VALID;
xpt_setup_ccb(&neg.ccb_h, path, /*priority*/1);
xpt_async(AC_TRANSFER_NEG, path, &neg);
}
if (path2 != NULL)
xpt_free_path(path2);
if (bootverbose) {
printf("%s: target %d using %dbit transfers\n",
ahc_name(ahc), devinfo->target,
8 * (0x01 << width));
}
}
if ((type & AHC_TRANS_GOAL) != 0)
tinfo->goal.width = width;
if ((type & AHC_TRANS_USER) != 0)
tinfo->user.width = width;
ahc_update_target_msg_request(ahc, devinfo, tinfo,
/*force*/FALSE, paused);
}
static void
ahc_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, int enable)
{
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
devinfo->target, &tstate);
if (enable)
tstate->tagenable |= devinfo->target_mask;
else
tstate->tagenable &= ~devinfo->target_mask;
}
/*
* Attach all the sub-devices we can find
*/
int
ahc_attach(struct ahc_softc *ahc)
{
struct ccb_setasync csa;
struct cam_devq *devq;
int bus_id;
int bus_id2;
struct cam_sim *sim;
struct cam_sim *sim2;
struct cam_path *path;
struct cam_path *path2;
int count;
int s;
int error;
count = 0;
sim = NULL;
sim2 = NULL;
s = splcam();
/* Hook up our interrupt handler */
if ((error = bus_setup_intr(ahc->device, ahc->irq, INTR_TYPE_CAM,
ahc_intr, ahc, &ahc->ih)) != 0) {
device_printf(ahc->device, "bus_setup_intr() failed: %d\n",
error);
goto fail;
}
/*
* Attach secondary channel first if the user has
* declared it the primary channel.
*/
if ((ahc->flags & AHC_CHANNEL_B_PRIMARY) != 0) {
bus_id = 1;
bus_id2 = 0;
} else {
bus_id = 0;
bus_id2 = 1;
}
/*
* Create the device queue for our SIM(s).
*/
devq = cam_simq_alloc(AHC_SCB_MAX);
if (devq == NULL)
goto fail;
/*
* Construct our first channel SIM entry
*/
sim = cam_sim_alloc(ahc_action, ahc_poll, "ahc", ahc, ahc->unit,
1, AHC_SCB_MAX, devq);
if (sim == NULL) {
cam_simq_free(devq);
goto fail;
}
if (xpt_bus_register(sim, bus_id) != CAM_SUCCESS) {
cam_sim_free(sim, /*free_devq*/TRUE);
sim = NULL;
goto fail;
}
if (xpt_create_path(&path, /*periph*/NULL,
cam_sim_path(sim), CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, /*free_devq*/TRUE);
sim = NULL;
goto fail;
}
xpt_setup_ccb(&csa.ccb_h, path, /*priority*/5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = ahc_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
count++;
if (ahc->features & AHC_TWIN) {
sim2 = cam_sim_alloc(ahc_action, ahc_poll, "ahc",
ahc, ahc->unit, 1,
AHC_SCB_MAX, devq);
if (sim2 == NULL) {
printf("ahc_attach: Unable to attach second "
"bus due to resource shortage");
goto fail;
}
if (xpt_bus_register(sim2, bus_id2) != CAM_SUCCESS) {
printf("ahc_attach: Unable to attach second "
"bus due to resource shortage");
/*
* We do not want to destroy the device queue
* because the first bus is using it.
*/
cam_sim_free(sim2, /*free_devq*/FALSE);
goto fail;
}
if (xpt_create_path(&path2, /*periph*/NULL,
cam_sim_path(sim2),
CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(sim2));
cam_sim_free(sim2, /*free_devq*/FALSE);
sim2 = NULL;
goto fail;
}
xpt_setup_ccb(&csa.ccb_h, path2, /*priority*/5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = ahc_async;
csa.callback_arg = sim2;
xpt_action((union ccb *)&csa);
count++;
}
fail:
if ((ahc->flags & AHC_CHANNEL_B_PRIMARY) != 0) {
ahc->sim_b = sim;
ahc->path_b = path;
ahc->sim = sim2;
ahc->path = path2;
} else {
ahc->sim = sim;
ahc->path = path;
ahc->sim_b = sim2;
ahc->path_b = path2;
}
splx(s);
return (count);
}
#if UNUSED
static void
ahc_scb_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
struct scb *scb)
{
role_t role;
int our_id;
if (scb->ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
our_id = scb->ccb->ccb_h.target_id;
role = ROLE_TARGET;
} else {
our_id = SCB_GET_CHANNEL(scb) == 'B' ? ahc->our_id_b : ahc->our_id;
role = ROLE_INITIATOR;
}
ahc_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahc, scb),
SCB_GET_LUN(scb), SCB_GET_CHANNEL(scb), role);
}
#endif
static void
ahc_fetch_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
{
u_int saved_scsiid;
role_t role;
int our_id;
if (ahc_inb(ahc, SSTAT0) & TARGET)
role = ROLE_TARGET;
else
role = ROLE_INITIATOR;
if (role == ROLE_TARGET
&& (ahc->features & AHC_MULTI_TID) != 0
&& (ahc_inb(ahc, SEQ_FLAGS) & CMDPHASE_PENDING) != 0) {
/* We were selected, so pull our id from TARGIDIN */
our_id = ahc_inb(ahc, TARGIDIN) & OID;
} else if ((ahc->features & AHC_ULTRA2) != 0)
our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID;
else
our_id = ahc_inb(ahc, SCSIID) & OID;
saved_scsiid = ahc_inb(ahc, SAVED_SCSIID);
ahc_compile_devinfo(devinfo,
our_id,
SCSIID_TARGET(ahc, saved_scsiid),
ahc_inb(ahc, SAVED_LUN),
SCSIID_CHANNEL(ahc, saved_scsiid),
role);
}
static void
ahc_compile_devinfo(struct ahc_devinfo *devinfo, u_int our_id, u_int target,
u_int lun, char channel, role_t role)
{
devinfo->our_scsiid = our_id;
devinfo->target = target;
devinfo->lun = lun;
devinfo->target_offset = target;
devinfo->channel = channel;
devinfo->role = role;
if (channel == 'B')
devinfo->target_offset += 8;
devinfo->target_mask = (0x01 << devinfo->target_offset);
}
/*
* Catch an interrupt from the adapter
*/
void
ahc_intr(void *arg)
{
struct ahc_softc *ahc;
u_int intstat;
ahc = (struct ahc_softc *)arg;
intstat = ahc_inb(ahc, INTSTAT);
/*
* Any interrupts to process?
*/
#if NPCI > 0
if ((intstat & INT_PEND) == 0) {
if ((ahc->chip & AHC_PCI) != 0
&& (ahc->unsolicited_ints > 500)) {
if ((ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
ahc_pci_intr(ahc);
ahc->unsolicited_ints = 0;
} else {
ahc->unsolicited_ints++;
}
return;
} else {
ahc->unsolicited_ints = 0;
}
#else
if ((intstat & INT_PEND) == 0)
return;
#endif
if (intstat & CMDCMPLT) {
ahc_outb(ahc, CLRINT, CLRCMDINT);
ahc_run_qoutfifo(ahc);
if ((ahc->flags & AHC_TARGETMODE) != 0)
ahc_run_tqinfifo(ahc, /*paused*/FALSE);
}
if (intstat & BRKADRINT) {
/*
* We upset the sequencer :-(
* Lookup the error message
*/
int i, error, num_errors;
error = ahc_inb(ahc, ERROR);
num_errors = sizeof(hard_error)/sizeof(hard_error[0]);
for (i = 0; error != 1 && i < num_errors; i++)
error >>= 1;
panic("%s: brkadrint, %s at seqaddr = 0x%x\n",
ahc_name(ahc), hard_error[i].errmesg,
ahc_inb(ahc, SEQADDR0) |
(ahc_inb(ahc, SEQADDR1) << 8));
/* Tell everyone that this HBA is no longer availible */
ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, ALL_CHANNELS,
CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN,
CAM_NO_HBA);
}
if ((intstat & (SEQINT|SCSIINT)) != 0)
ahc_pause_bug_fix(ahc);
if ((intstat & SEQINT) != 0)
ahc_handle_seqint(ahc, intstat);
if ((intstat & SCSIINT) != 0)
ahc_handle_scsiint(ahc, intstat);
}
static struct tmode_tstate *
ahc_alloc_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel)
{
struct tmode_tstate *master_tstate;
struct tmode_tstate *tstate;
int i, s;
master_tstate = ahc->enabled_targets[ahc->our_id];
if (channel == 'B') {
scsi_id += 8;
master_tstate = ahc->enabled_targets[ahc->our_id_b + 8];
}
if (ahc->enabled_targets[scsi_id] != NULL
&& ahc->enabled_targets[scsi_id] != master_tstate)
panic("%s: ahc_alloc_tstate - Target already allocated",
ahc_name(ahc));
tstate = malloc(sizeof(*tstate), M_DEVBUF, M_NOWAIT);
if (tstate == NULL)
return (NULL);
/*
* If we have allocated a master tstate, copy user settings from
* the master tstate (taken from SRAM or the EEPROM) for this
* channel, but reset our current and goal settings to async/narrow
* until an initiator talks to us.
*/
if (master_tstate != NULL) {
bcopy(master_tstate, tstate, sizeof(*tstate));
bzero(tstate->enabled_luns, sizeof(tstate->enabled_luns));
tstate->ultraenb = 0;
for (i = 0; i < 16; i++) {
bzero(&tstate->transinfo[i].current,
sizeof(tstate->transinfo[i].current));
bzero(&tstate->transinfo[i].goal,
sizeof(tstate->transinfo[i].goal));
}
} else
bzero(tstate, sizeof(*tstate));
s = splcam();
ahc->enabled_targets[scsi_id] = tstate;
splx(s);
return (tstate);
}
static void
ahc_free_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel, int force)
{
struct tmode_tstate *tstate;
/* Don't clean up the entry for our initiator role */
if ((ahc->flags & AHC_INITIATORMODE) != 0
&& ((channel == 'B' && scsi_id == ahc->our_id_b)
|| (channel == 'A' && scsi_id == ahc->our_id))
&& force == FALSE)
return;
if (channel == 'B')
scsi_id += 8;
tstate = ahc->enabled_targets[scsi_id];
if (tstate != NULL)
free(tstate, M_DEVBUF);
ahc->enabled_targets[scsi_id] = NULL;
}
static void
ahc_handle_en_lun(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb)
{
struct tmode_tstate *tstate;
struct tmode_lstate *lstate;
struct ccb_en_lun *cel;
cam_status status;
u_int target;
u_int lun;
u_int target_mask;
char channel;
int s;
status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate, &lstate,
/* notfound_failure*/FALSE);
if (status != CAM_REQ_CMP) {
ccb->ccb_h.status = status;
return;
}
cel = &ccb->cel;
target = ccb->ccb_h.target_id;
lun = ccb->ccb_h.target_lun;
channel = SIM_CHANNEL(ahc, sim);
target_mask = 0x01 << target;
if (channel == 'B')
target_mask <<= 8;
if (cel->enable != 0) {
u_int scsiseq;
/* Are we already enabled?? */
if (lstate != NULL) {
xpt_print_path(ccb->ccb_h.path);
printf("Lun already enabled\n");
ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
return;
}
if (cel->grp6_len != 0
|| cel->grp7_len != 0) {
/*
* Don't (yet?) support vendor
* specific commands.
*/
ccb->ccb_h.status = CAM_REQ_INVALID;
printf("Non-zero Group Codes\n");
return;
}
/*
* Seems to be okay.
* Setup our data structures.
*/
if (target != CAM_TARGET_WILDCARD && tstate == NULL) {
tstate = ahc_alloc_tstate(ahc, target, channel);
if (tstate == NULL) {
xpt_print_path(ccb->ccb_h.path);
printf("Couldn't allocate tstate\n");
ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
return;
}
}
lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT);
if (lstate == NULL) {
xpt_print_path(ccb->ccb_h.path);
printf("Couldn't allocate lstate\n");
ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
return;
}
bzero(lstate, sizeof(*lstate));
status = xpt_create_path(&lstate->path, /*periph*/NULL,
xpt_path_path_id(ccb->ccb_h.path),
xpt_path_target_id(ccb->ccb_h.path),
xpt_path_lun_id(ccb->ccb_h.path));
if (status != CAM_REQ_CMP) {
free(lstate, M_DEVBUF);
xpt_print_path(ccb->ccb_h.path);
printf("Couldn't allocate path\n");
ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
return;
}
SLIST_INIT(&lstate->accept_tios);
SLIST_INIT(&lstate->immed_notifies);
s = splcam();
pause_sequencer(ahc);
if (target != CAM_TARGET_WILDCARD) {
tstate->enabled_luns[lun] = lstate;
ahc->enabled_luns++;
if ((ahc->features & AHC_MULTI_TID) != 0) {
u_int targid_mask;
targid_mask = ahc_inb(ahc, TARGID)
| (ahc_inb(ahc, TARGID + 1) << 8);
targid_mask |= target_mask;
ahc_outb(ahc, TARGID, targid_mask);
ahc_outb(ahc, TARGID+1, (targid_mask >> 8));
ahc_update_scsiid(ahc, targid_mask);
} else {
u_int our_id;
char channel;
channel = SIM_CHANNEL(ahc, sim);
our_id = SIM_SCSI_ID(ahc, sim);
/*
* This can only happen if selections
* are not enabled
*/
if (target != our_id) {
u_int sblkctl;
char cur_channel;
int swap;
sblkctl = ahc_inb(ahc, SBLKCTL);
cur_channel = (sblkctl & SELBUSB)
? 'B' : 'A';
if ((ahc->features & AHC_TWIN) == 0)
cur_channel = 'A';
swap = cur_channel != channel;
if (channel == 'A')
ahc->our_id = target;
else
ahc->our_id_b = target;
if (swap)
ahc_outb(ahc, SBLKCTL,
sblkctl ^ SELBUSB);
ahc_outb(ahc, SCSIID, target);
if (swap)
ahc_outb(ahc, SBLKCTL, sblkctl);
}
}
} else
ahc->black_hole = lstate;
/* Allow select-in operations */
if (ahc->black_hole != NULL && ahc->enabled_luns > 0) {
scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
scsiseq |= ENSELI;
ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq);
scsiseq = ahc_inb(ahc, SCSISEQ);
scsiseq |= ENSELI;
ahc_outb(ahc, SCSISEQ, scsiseq);
}
unpause_sequencer(ahc);
splx(s);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_print_path(ccb->ccb_h.path);
printf("Lun now enabled for target mode\n");
} else {
struct ccb_hdr *elm;
int i, empty;
if (lstate == NULL) {
ccb->ccb_h.status = CAM_LUN_INVALID;
return;
}
s = splcam();
ccb->ccb_h.status = CAM_REQ_CMP;
LIST_FOREACH(elm, &ahc->pending_ccbs, sim_links.le) {
if (elm->func_code == XPT_CONT_TARGET_IO
&& !xpt_path_comp(elm->path, ccb->ccb_h.path)){
printf("CTIO pending\n");
ccb->ccb_h.status = CAM_REQ_INVALID;
splx(s);
return;
}
}
if (SLIST_FIRST(&lstate->accept_tios) != NULL) {
printf("ATIOs pending\n");
ccb->ccb_h.status = CAM_REQ_INVALID;
}
if (SLIST_FIRST(&lstate->immed_notifies) != NULL) {
printf("INOTs pending\n");
ccb->ccb_h.status = CAM_REQ_INVALID;
}
if (ccb->ccb_h.status != CAM_REQ_CMP) {
splx(s);
return;
}
xpt_print_path(ccb->ccb_h.path);
printf("Target mode disabled\n");
xpt_free_path(lstate->path);
free(lstate, M_DEVBUF);
pause_sequencer(ahc);
/* Can we clean up the target too? */
if (target != CAM_TARGET_WILDCARD) {
tstate->enabled_luns[lun] = NULL;
ahc->enabled_luns--;
for (empty = 1, i = 0; i < 8; i++)
if (tstate->enabled_luns[i] != NULL) {
empty = 0;
break;
}
if (empty) {
ahc_free_tstate(ahc, target, channel,
/*force*/FALSE);
if (ahc->features & AHC_MULTI_TID) {
u_int targid_mask;
targid_mask = ahc_inb(ahc, TARGID)
| (ahc_inb(ahc, TARGID + 1)
<< 8);
targid_mask &= ~target_mask;
ahc_outb(ahc, TARGID, targid_mask);
ahc_outb(ahc, TARGID+1,
(targid_mask >> 8));
ahc_update_scsiid(ahc, targid_mask);
}
}
} else {
ahc->black_hole = NULL;
/*
* We can't allow selections without
* our black hole device.
*/
empty = TRUE;
}
if (ahc->enabled_luns == 0) {
/* Disallow select-in */
u_int scsiseq;
scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
scsiseq &= ~ENSELI;
ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq);
scsiseq = ahc_inb(ahc, SCSISEQ);
scsiseq &= ~ENSELI;
ahc_outb(ahc, SCSISEQ, scsiseq);
}
unpause_sequencer(ahc);
splx(s);
}
}
static void
ahc_update_scsiid(struct ahc_softc *ahc, u_int targid_mask)
{
u_int scsiid_mask;
u_int scsiid;
if ((ahc->features & AHC_MULTI_TID) == 0)
panic("ahc_update_scsiid called on non-multitid unit\n");
/*
* Since we will rely on the the TARGID mask
* for selection enables, ensure that OID
* in SCSIID is not set to some other ID
* that we don't want to allow selections on.
*/
if ((ahc->features & AHC_ULTRA2) != 0)
scsiid = ahc_inb(ahc, SCSIID_ULTRA2);
else
scsiid = ahc_inb(ahc, SCSIID);
scsiid_mask = 0x1 << (scsiid & OID);
if ((targid_mask & scsiid_mask) == 0) {
u_int our_id;
/* ffs counts from 1 */
our_id = ffs(targid_mask);
if (our_id == 0)
our_id = ahc->our_id;
else
our_id--;
scsiid &= TID;
scsiid |= our_id;
}
if ((ahc->features & AHC_ULTRA2) != 0)
ahc_outb(ahc, SCSIID_ULTRA2, scsiid);
else
ahc_outb(ahc, SCSIID, scsiid);
}
static int
ahc_handle_target_cmd(struct ahc_softc *ahc, struct target_cmd *cmd)
{
struct tmode_tstate *tstate;
struct tmode_lstate *lstate;
struct ccb_accept_tio *atio;
uint8_t *byte;
int initiator;
int target;
int lun;
initiator = SCSIID_TARGET(ahc, cmd->scsiid);
target = SCSIID_OUR_ID(cmd->scsiid);
lun = (cmd->identify & MSG_IDENTIFY_LUNMASK);
byte = cmd->bytes;
tstate = ahc->enabled_targets[target];
lstate = NULL;
if (tstate != NULL)
lstate = tstate->enabled_luns[lun];
/*
* Commands for disabled luns go to the black hole driver.
*/
if (lstate == NULL)
lstate = ahc->black_hole;
atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios);
if (atio == NULL) {
ahc->flags |= AHC_TQINFIFO_BLOCKED;
/*
* Wait for more ATIOs from the peripheral driver for this lun.
*/
return (1);
} else
ahc->flags &= ~AHC_TQINFIFO_BLOCKED;
#if 0
printf("Incoming command from %d for %d:%d%s\n",
initiator, target, lun,
lstate == ahc->black_hole ? "(Black Holed)" : "");
#endif
SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle);
if (lstate == ahc->black_hole) {
/* Fill in the wildcards */
atio->ccb_h.target_id = target;
atio->ccb_h.target_lun = lun;
}
/*
* Package it up and send it off to
* whomever has this lun enabled.
*/
atio->sense_len = 0;
atio->init_id = initiator;
if (byte[0] != 0xFF) {
/* Tag was included */
atio->tag_action = *byte++;
atio->tag_id = *byte++;
atio->ccb_h.flags = CAM_TAG_ACTION_VALID;
} else {
atio->ccb_h.flags = 0;
}
byte++;
/* Okay. Now determine the cdb size based on the command code */
switch (*byte >> CMD_GROUP_CODE_SHIFT) {
case 0:
atio->cdb_len = 6;
break;
case 1:
case 2:
atio->cdb_len = 10;
break;
case 4:
atio->cdb_len = 16;
break;
case 5:
atio->cdb_len = 12;
break;
case 3:
default:
/* Only copy the opcode. */
atio->cdb_len = 1;
printf("Reserved or VU command code type encountered\n");
break;
}
bcopy(byte, atio->cdb_io.cdb_bytes, atio->cdb_len);
atio->ccb_h.status |= CAM_CDB_RECVD;
if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) {
/*
* We weren't allowed to disconnect.
* We're hanging on the bus until a
* continue target I/O comes in response
* to this accept tio.
*/
#if 0
printf("Received Immediate Command %d:%d:%d - %p\n",
initiator, target, lun, ahc->pending_device);
#endif
ahc->pending_device = lstate;
ahc_freeze_ccb((union ccb *)atio);
atio->ccb_h.flags |= CAM_DIS_DISCONNECT;
}
xpt_done((union ccb*)atio);
return (0);
}
static void
ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat)
{
struct scb *scb;
struct ahc_devinfo devinfo;
ahc_fetch_devinfo(ahc, &devinfo);
/*
* Clear the upper byte that holds SEQINT status
* codes and clear the SEQINT bit. We will unpause
* the sequencer, if appropriate, after servicing
* the request.
*/
ahc_outb(ahc, CLRINT, CLRSEQINT);
switch (intstat & SEQINT_MASK) {
case BAD_STATUS:
{
u_int scb_index;
struct hardware_scb *hscb;
struct ccb_scsiio *csio;
/*
* The sequencer will notify us when a command
* has an error that would be of interest to
* the kernel. This allows us to leave the sequencer
* running in the common case of command completes
* without error. The sequencer will already have
* dma'd the SCB back up to us, so we can reference
* the in kernel copy directly.
*/
scb_index = ahc_inb(ahc, SCB_TAG);
scb = &ahc->scb_data->scbarray[scb_index];
/*
* Set the default return value to 0 (don't
* send sense). The sense code will change
* this if needed.
*/
ahc_outb(ahc, RETURN_1, 0);
if (!(scb_index < ahc->scb_data->numscbs
&& (scb->flags & SCB_ACTIVE) != 0)) {
printf("%s:%c:%d: ahc_intr - referenced scb "
"not valid during seqint 0x%x scb(%d)\n",
ahc_name(ahc), devinfo.channel,
devinfo.target, intstat, scb_index);
goto unpause;
}
hscb = scb->hscb;
/* Don't want to clobber the original sense code */
if ((scb->flags & SCB_SENSE) != 0) {
/*
* Clear the SCB_SENSE Flag and have
* the sequencer do a normal command
* complete.
*/
scb->flags &= ~SCB_SENSE;
ahcsetccbstatus(scb->ccb, CAM_AUTOSENSE_FAIL);
break;
}
ahcsetccbstatus(scb->ccb, CAM_SCSI_STATUS_ERROR);
/* Freeze the queue until the client sees the error. */
ahc_freeze_devq(ahc, scb->ccb->ccb_h.path);
ahc_freeze_ccb(scb->ccb);
csio = &scb->ccb->csio;
csio->scsi_status = hscb->shared_data.status.scsi_status;
switch (csio->scsi_status) {
case SCSI_STATUS_OK:
printf("%s: Interrupted for staus of 0???\n",
ahc_name(ahc));
break;
case SCSI_STATUS_CMD_TERMINATED:
case SCSI_STATUS_CHECK_COND:
#ifdef AHC_DEBUG
if (ahc_debug & AHC_SHOWSENSE) {
xpt_print_path(csio->ccb_h.path);
printf("SCB %d: requests Check Status\n",
scb->hscb->tag);
}
#endif
if ((csio->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0) {
struct ahc_dma_seg *sg;
struct scsi_sense *sc;
struct ahc_initiator_tinfo *targ_info;
struct tmode_tstate *tstate;
struct ahc_transinfo *tinfo;
targ_info =
ahc_fetch_transinfo(ahc,
devinfo.channel,
devinfo.our_scsiid,
devinfo.target,
&tstate);
tinfo = &targ_info->current;
sg = scb->sg_list;
sc = (struct scsi_sense *)
(&hscb->shared_data.cdb);
/*
* Save off the residual if there is one.
*/
if (ahc_check_residual(scb))
ahc_calc_residual(scb);
else
scb->ccb->csio.resid = 0;
#ifdef AHC_DEBUG
if (ahc_debug & AHC_SHOWSENSE) {
xpt_print_path(csio->ccb_h.path);
printf("Sending Sense\n");
}
#endif
sg->addr = ahc->scb_data->sense_busaddr
+ (hscb->tag*sizeof(struct scsi_sense_data));
sg->len = MIN(sizeof(struct scsi_sense_data),
csio->sense_len);
sg->len |= AHC_DMA_LAST_SEG;
sc->opcode = REQUEST_SENSE;
sc->byte2 = 0;
if (tinfo->protocol_version <= SCSI_REV_2
&& SCB_GET_LUN(scb) < 8)
sc->byte2 = SCB_GET_LUN(scb) << 5;
sc->unused[0] = 0;
sc->unused[1] = 0;
sc->length = sg->len;
sc->control = 0;
/*
* Would be nice to preserve DISCENB here,
* but due to the way we manage busy targets,
* we can't.
*/
hscb->control = 0;
/*
* This request sense could be because the
* the device lost power or in some other
* way has lost our transfer negotiations.
* Renegotiate if appropriate. Unit attention
* errors will be reported before any data
* phases occur.
*/
if (scb->ccb->csio.resid
== scb->ccb->csio.dxfer_len) {
ahc_update_target_msg_request(ahc,
&devinfo,
targ_info,
/*force*/TRUE,
/*paused*/TRUE);
}
hscb->cdb_len = sizeof(*sc);
hscb->dataptr = sg->addr;
hscb->datacnt = sg->len;
hscb->sgptr = scb->sg_list_phys | SG_FULL_RESID;
scb->sg_count = 1;
scb->flags |= SCB_SENSE;
ahc_outb(ahc, RETURN_1, SEND_SENSE);
/*
* Ensure we have enough time to actually
* retrieve the sense.
*/
untimeout(ahc_timeout, (caddr_t)scb,
scb->ccb->ccb_h.timeout_ch);
scb->ccb->ccb_h.timeout_ch =
timeout(ahc_timeout, (caddr_t)scb, 5 * hz);
}
break;
default:
break;
}
break;
}
case NO_MATCH:
{
/* Ensure we don't leave the selection hardware on */
ahc_outb(ahc, SCSISEQ,
ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
printf("%s:%c:%d: no active SCB for reconnecting "
"target - issuing BUS DEVICE RESET\n",
ahc_name(ahc), devinfo.channel, devinfo.target);
printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
"ARG_1 == 0x%x ARG_2 = 0x%x, SEQ_FLAGS == 0x%x\n",
ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN),
ahc_inb(ahc, ARG_1), ahc_inb(ahc, ARG_2),
ahc_inb(ahc, SEQ_FLAGS));
printf("SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
"SCB_TAG == 0x%x\n",
ahc_inb(ahc, SCB_SCSIID), ahc_inb(ahc, SCB_LUN),
ahc_inb(ahc, SCB_TAG));
ahc->msgout_buf[0] = MSG_BUS_DEV_RESET;
ahc->msgout_len = 1;
ahc->msgout_index = 0;
ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
ahc_outb(ahc, MSG_OUT, HOST_MSG);
ahc_outb(ahc, SCSISIGO, ahc_inb(ahc, LASTPHASE) | ATNO);
break;
}
case SEND_REJECT:
{
u_int rejbyte = ahc_inb(ahc, ACCUM);
printf("%s:%c:%d: Warning - unknown message received from "
"target (0x%x). Rejecting\n",
ahc_name(ahc), devinfo.channel, devinfo.target, rejbyte);
break;
}
case NO_IDENT:
{
/*
* The reconnecting target either did not send an identify
* message, or did, but we didn't find an SCB to match and
* before it could respond to our ATN/abort, it hit a dataphase.
* The only safe thing to do is to blow it away with a bus
* reset.
*/
int found;
printf("%s:%c:%d: Target did not send an IDENTIFY message. "
"LASTPHASE = 0x%x, SAVED_SCSIID == 0x%x\n",
ahc_name(ahc), devinfo.channel, devinfo.target,
ahc_inb(ahc, LASTPHASE), ahc_inb(ahc, SAVED_SCSIID));
found = ahc_reset_channel(ahc, devinfo.channel,
/*initiate reset*/TRUE);
printf("%s: Issued Channel %c Bus Reset. "
"%d SCBs aborted\n", ahc_name(ahc), devinfo.channel,
found);
return;
}
case IGN_WIDE_RES:
ahc_handle_ign_wide_residue(ahc, &devinfo);
break;
case BAD_PHASE:
{
u_int lastphase;
lastphase = ahc_inb(ahc, LASTPHASE);
if (lastphase == P_BUSFREE) {
printf("%s:%c:%d: Missed busfree. Curphase = 0x%x\n",
ahc_name(ahc), devinfo.channel, devinfo.target,
ahc_inb(ahc, SCSISIGI));
restart_sequencer(ahc);
return;
} else {
printf("%s:%c:%d: unknown scsi bus phase %x. "
"Attempting to continue\n",
ahc_name(ahc), devinfo.channel, devinfo.target,
ahc_inb(ahc, SCSISIGI));
}
break;
}
case HOST_MSG_LOOP:
{
/*
* The sequencer has encountered a message phase
* that requires host assistance for completion.
* While handling the message phase(s), we will be
* notified by the sequencer after each byte is
* transfered so we can track bus phase changes.
*
* If this is the first time we've seen a HOST_MSG_LOOP
* interrupt, initialize the state of the host message
* loop.
*/
if (ahc->msg_type == MSG_TYPE_NONE) {
u_int bus_phase;
bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
if (bus_phase != P_MESGIN
&& bus_phase != P_MESGOUT) {
printf("ahc_intr: HOST_MSG_LOOP bad "
"phase 0x%x\n",
bus_phase);
/*
* Probably transitioned to bus free before
* we got here. Just punt the message.
*/
ahc_clear_intstat(ahc);
restart_sequencer(ahc);
return;
}
if (devinfo.role == ROLE_INITIATOR) {
struct scb *scb;
u_int scb_index;
scb_index = ahc_inb(ahc, SCB_TAG);
scb = &ahc->scb_data->scbarray[scb_index];
if (bus_phase == P_MESGOUT)
ahc_setup_initiator_msgout(ahc,
&devinfo,
scb);
else {
ahc->msg_type =
MSG_TYPE_INITIATOR_MSGIN;
ahc->msgin_index = 0;
}
} else {
if (bus_phase == P_MESGOUT) {
ahc->msg_type =
MSG_TYPE_TARGET_MSGOUT;
ahc->msgin_index = 0;
} else
/* XXX Ever executed??? */
ahc_setup_target_msgin(ahc, &devinfo);
}
}
/* Pass a NULL path so that handlers generate their own */
ahc_handle_message_phase(ahc, /*path*/NULL);
break;
}
case PERR_DETECTED:
{
/*
* If we've cleared the parity error interrupt
* but the sequencer still believes that SCSIPERR
* is true, it must be that the parity error is
* for the currently presented byte on the bus,
* and we are not in a phase (data-in) where we will
* eventually ack this byte. Ack the byte and
* throw it away in the hope that the target will
* take us to message out to deliver the appropriate
* error message.
*/
if ((intstat & SCSIINT) == 0
&& (ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0) {
u_int curphase;
/*
* The hardware will only let you ack bytes
* if the expected phase in SCSISIGO matches
* the current phase. Make sure this is
* currently the case.
*/
curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
ahc_outb(ahc, LASTPHASE, curphase);
ahc_outb(ahc, SCSISIGO, curphase);
ahc_inb(ahc, SCSIDATL);
}
break;
}
case DATA_OVERRUN:
{
/*
* When the sequencer detects an overrun, it
* places the controller in "BITBUCKET" mode
* and allows the target to complete its transfer.
* Unfortunately, none of the counters get updated
* when the controller is in this mode, so we have
* no way of knowing how large the overrun was.
*/
u_int scbindex = ahc_inb(ahc, SCB_TAG);
u_int lastphase = ahc_inb(ahc, LASTPHASE);
u_int i;
scb = &ahc->scb_data->scbarray[scbindex];
for (i = 0; i < num_phases; i++) {
if (lastphase == phase_table[i].phase)
break;
}
xpt_print_path(scb->ccb->ccb_h.path);
printf("data overrun detected %s."
" Tag == 0x%x.\n",
phase_table[i].phasemsg,
scb->hscb->tag);
xpt_print_path(scb->ccb->ccb_h.path);
printf("%s seen Data Phase. Length = %d. NumSGs = %d.\n",
ahc_inb(ahc, SEQ_FLAGS) & DPHASE ? "Have" : "Haven't",
scb->ccb->csio.dxfer_len, scb->sg_count);
if (scb->sg_count > 0) {
for (i = 0; i < scb->sg_count; i++) {
printf("sg[%d] - Addr 0x%x : Length %d\n",
i,
scb->sg_list[i].addr,
scb->sg_list[i].len & AHC_SG_LEN_MASK);
}
}
/*
* Set this and it will take effect when the
* target does a command complete.
*/
ahc_freeze_devq(ahc, scb->ccb->ccb_h.path);
ahcsetccbstatus(scb->ccb, CAM_DATA_RUN_ERR);
ahc_freeze_ccb(scb->ccb);
break;
}
case TRACEPOINT:
{
printf("SAVED_SCSIID %x, SAVED_LUN %x, SCBPTR %x\n",
ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN),
ahc_inb(ahc, SCBPTR));
#if 0
printf("%s: SCB_DATAPTR = %x, SCB_DATACNT = %x\n",
ahc_name(ahc),
ahc_inb(ahc, SCB_DATAPTR)
| (ahc_inb(ahc, SCB_DATAPTR + 1) << 8)
| (ahc_inb(ahc, SCB_DATAPTR + 2) << 16)
| (ahc_inb(ahc, SCB_DATAPTR + 3) << 24),
ahc_inb(ahc, SCB_DATACNT)
| (ahc_inb(ahc, SCB_DATACNT + 1) << 8)
| (ahc_inb(ahc, SCB_DATACNT + 2) << 16)
| (ahc_inb(ahc, SCB_DATACNT + 3) << 24));
printf("SCSIRATE = %x\n", ahc_inb(ahc, SCSIRATE));
printf("SG_CACHEPTR = %x\n", ahc_inb(ahc, SINDEX));
printf("DFCNTRL = %x, DFSTATUS = %x\n",
ahc_inb(ahc, DFCNTRL),
ahc_inb(ahc, DFSTATUS));
if ((ahc->features & AHC_CMD_CHAN) != 0) {
printf("CCHADDR = 0x%x\n",
ahc_inb(ahc, CCHADDR)
| (ahc_inb(ahc, CCHADDR + 1) << 8)
| (ahc_inb(ahc, CCHADDR + 2) << 16)
| (ahc_inb(ahc, CCHADDR + 3) << 24));
} else {
printf("HADDR = 0x%x\n",
ahc_inb(ahc, HADDR)
| (ahc_inb(ahc, HADDR + 1) << 8)
| (ahc_inb(ahc, HADDR + 2) << 16)
| (ahc_inb(ahc, HADDR + 3) << 24));
}
#endif
break;
}
case TRACEPOINT2:
{
printf("SINDEX = %x\n", ahc_inb(ahc, SINDEX));
printf("SCSIRATE = %x\n", ahc_inb(ahc, SCSIRATE));
#if 0
printf("SCB_RESIDUAL_SGPTR = %x, SCB_RESIDUAL_DATACNT = %x\n",
ahc_inb(ahc, SCB_RESIDUAL_SGPTR)
| (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 1) << 8)
| (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 2) << 16)
| (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 3) << 24),
ahc_inb(ahc, SCB_RESIDUAL_DATACNT)
| (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 1) << 8)
| (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 2) << 16)
| (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 3) << 24));
printf("DATA_COUNT_ODD = %x\n", ahc_inb(ahc, DATA_COUNT_ODD));
printf("SINDEX = %x\n", ahc_inb(ahc, SINDEX));
printf("SCB_SGPTR %x, SCB_RESIDUAL_SGPTR %x\n",
ahc_inb(ahc, SCB_SGPTR),
ahc_inb(ahc, SCB_RESIDUAL_SGPTR));
printf("SAVED_SCSIID %x, SAVED_LUN %d, "
"DISCONNECTED_SCBH %d\n",
ahc_inb(ahc, SAVED_SCSIID),
ahc_inb(ahc, SAVED_LUN),
ahc_inb(ahc, DISCONNECTED_SCBH));
int i;
if (ahc->unit != 1)
break;
for (i = 0; i < 32;) {
printf("0x%x 0x%x 0x%x 0x%x\n",
ahc_inb(ahc, SCB_CONTROL + i),
ahc_inb(ahc, SCB_CONTROL + i + 1),
ahc_inb(ahc, SCB_CONTROL + i + 2),
ahc_inb(ahc, SCB_CONTROL + i + 3));
i += 4;
}
#endif
#if 0
printf("SSTAT1 == 0x%x\n", ahc_inb(ahc, SSTAT1));
printf("SSTAT0 == 0x%x\n", ahc_inb(ahc, SSTAT0));
printf(", SCSISIGI == 0x%x\n", ahc_inb(ahc, SCSISIGI));
printf("TRACEPOINT: CCHCNT = %d, SG_COUNT = %d\n",
ahc_inb(ahc, CCHCNT), ahc_inb(ahc, SG_COUNT));
printf("TRACEPOINT: SCB_TAG = %d\n", ahc_inb(ahc, SCB_TAG));
printf("TRACEPOINT1: CCHADDR = %d, CCHCNT = %d, SCBPTR = %d\n",
ahc_inb(ahc, CCHADDR)
| (ahc_inb(ahc, CCHADDR+1) << 8)
| (ahc_inb(ahc, CCHADDR+2) << 16)
| (ahc_inb(ahc, CCHADDR+3) << 24),
ahc_inb(ahc, CCHCNT)
| (ahc_inb(ahc, CCHCNT+1) << 8)
| (ahc_inb(ahc, CCHCNT+2) << 16),
ahc_inb(ahc, SCBPTR));
printf("TRACEPOINT: WAITING_SCBH = %d\n", ahc_inb(ahc, WAITING_SCBH));
printf("TRACEPOINT: SCB_TAG = %d\n", ahc_inb(ahc, SCB_TAG));
#endif
break;
}
default:
printf("ahc_intr: seqint, "
"intstat == 0x%x, scsisigi = 0x%x\n",
intstat, ahc_inb(ahc, SCSISIGI));
break;
}
unpause:
/*
* The sequencer is paused immediately on
* a SEQINT, so we should restart it when
* we're done.
*/
unpause_sequencer(ahc);
}
static void
ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
{
u_int scb_index;
u_int status;
struct scb *scb;
char cur_channel;
char intr_channel;
if ((ahc->features & AHC_TWIN) != 0
&& ((ahc_inb(ahc, SBLKCTL) & SELBUSB) != 0))
cur_channel = 'B';
else
cur_channel = 'A';
intr_channel = cur_channel;
status = ahc_inb(ahc, SSTAT1);
if (status == 0) {
if ((ahc->features & AHC_TWIN) != 0) {
/* Try the other channel */
ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB);
status = ahc_inb(ahc, SSTAT1);
ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB);
intr_channel = (cur_channel == 'A') ? 'B' : 'A';
}
if (status == 0) {
printf("%s: Spurious SCSI interrupt\n", ahc_name(ahc));
return;
}
}
scb_index = ahc_inb(ahc, SCB_TAG);
if (scb_index < ahc->scb_data->numscbs) {
scb = &ahc->scb_data->scbarray[scb_index];
if ((scb->flags & SCB_ACTIVE) == 0
|| (ahc_inb(ahc, SEQ_FLAGS) & IDENTIFY_SEEN) == 0)
scb = NULL;
} else
scb = NULL;
if ((status & SCSIRSTI) != 0) {
printf("%s: Someone reset channel %c\n",
ahc_name(ahc), intr_channel);
ahc_reset_channel(ahc, intr_channel, /* Initiate Reset */FALSE);
} else if ((status & SCSIPERR) != 0) {
/*
* Determine the bus phase and queue an appropriate message.
* SCSIPERR is latched true as soon as a parity error
* occurs. If the sequencer acked the transfer that
* caused the parity error and the currently presented
* transfer on the bus has correct parity, SCSIPERR will
* be cleared by CLRSCSIPERR. Use this to determine if
* we should look at the last phase the sequencer recorded,
* or the current phase presented on the bus.
*/
u_int mesg_out;
u_int curphase;
u_int errorphase;
u_int lastphase;
u_int i;
lastphase = ahc_inb(ahc, LASTPHASE);
curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
ahc_outb(ahc, CLRSINT1, CLRSCSIPERR);
/*
* For all phases save DATA, the sequencer won't
* automatically ack a byte that has a parity error
* in it. So the only way that the current phase
* could be 'data-in' is if the parity error is for
* an already acked byte in the data phase. During
* synchronous data-in transfers, we may actually
* ack bytes before latching the current phase in
* LASTPHASE, leading to the discrepancy between
* curphase and lastphase.
*/
if ((ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0
|| curphase == P_DATAIN)
errorphase = curphase;
else
errorphase = lastphase;
for (i = 0; i < num_phases; i++) {
if (errorphase == phase_table[i].phase)
break;
}
mesg_out = phase_table[i].mesg_out;
if (scb != NULL)
xpt_print_path(scb->ccb->ccb_h.path);
else
printf("%s:%c:%d: ", ahc_name(ahc),
intr_channel,
SCSIID_TARGET(ahc, ahc_inb(ahc, SAVED_SCSIID)));
printf("parity error detected %s. "
"SEQADDR(0x%x) SCSIRATE(0x%x)\n",
phase_table[i].phasemsg,
ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8),
ahc_inb(ahc, SCSIRATE));
/*
* We've set the hardware to assert ATN if we
* get a parity error on "in" phases, so all we
* need to do is stuff the message buffer with
* the appropriate message. "In" phases have set
* mesg_out to something other than MSG_NOP.
*/
if (mesg_out != MSG_NOOP) {
if (ahc->msg_type != MSG_TYPE_NONE)
ahc->send_msg_perror = TRUE;
else
ahc_outb(ahc, MSG_OUT, mesg_out);
}
ahc_outb(ahc, CLRINT, CLRSCSIINT);
unpause_sequencer(ahc);
} else if ((status & BUSFREE) != 0
&& (ahc_inb(ahc, SIMODE1) & ENBUSFREE) != 0) {
/*
* First look at what phase we were last in.
* If its message out, chances are pretty good
* that the busfree was in response to one of
* our abort requests.
*/
u_int lastphase = ahc_inb(ahc, LASTPHASE);
u_int saved_scsiid = ahc_inb(ahc, SAVED_SCSIID);
u_int saved_lun = ahc_inb(ahc, SAVED_LUN);
u_int target = SCSIID_TARGET(ahc, saved_scsiid);
u_int initiator_role_id = SCSIID_OUR_ID(saved_scsiid);
char channel = SCSIID_CHANNEL(ahc, saved_scsiid);
int printerror = 1;
ahc_outb(ahc, SCSISEQ,
ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
if (lastphase == P_MESGOUT) {
u_int message;
u_int tag;
message = ahc->msgout_buf[ahc->msgout_index - 1];
tag = SCB_LIST_NULL;
switch (message) {
case MSG_ABORT_TAG:
tag = scb->hscb->tag;
/* FALLTRHOUGH */
case MSG_ABORT:
xpt_print_path(scb->ccb->ccb_h.path);
printf("SCB %d - Abort %s Completed.\n",
scb->hscb->tag, tag == SCB_LIST_NULL ?
"" : "Tag");
ahc_abort_scbs(ahc, target, channel,
saved_lun, tag,
ROLE_INITIATOR,
CAM_REQ_ABORTED);
printerror = 0;
break;
case MSG_BUS_DEV_RESET:
{
struct ahc_devinfo devinfo;
/*
* Don't mark the user's request for this BDR
* as completing with CAM_BDR_SENT. CAM3
* specifies CAM_REQ_CMP.
*/
if (scb != NULL
&& scb->ccb->ccb_h.func_code == XPT_RESET_DEV
&& ahc_match_scb(ahc, scb, target, channel,
saved_lun,
SCB_LIST_NULL,
ROLE_INITIATOR)) {
ahcsetccbstatus(scb->ccb, CAM_REQ_CMP);
}
ahc_compile_devinfo(&devinfo,
initiator_role_id,
target,
saved_lun,
channel,
ROLE_INITIATOR);
ahc_handle_devreset(ahc, &devinfo,
CAM_BDR_SENT, AC_SENT_BDR,
"Bus Device Reset",
/*verbose_level*/0);
printerror = 0;
break;
}
default:
break;
}
}
if (printerror != 0) {
u_int i;
if (scb != NULL) {
u_int tag;
if ((scb->hscb->control & TAG_ENB) != 0)
tag = scb->hscb->tag;
else
tag = SCB_LIST_NULL;
ahc_abort_scbs(ahc, target, channel,
SCB_GET_LUN(scb), tag,
ROLE_INITIATOR,
CAM_UNEXP_BUSFREE);
xpt_print_path(scb->ccb->ccb_h.path);
} else {
/*
* We had not fully identified this connection,
* so we cannot abort anything.
*/
printf("%s: ", ahc_name(ahc));
}
for (i = 0; i < num_phases; i++) {
if (lastphase == phase_table[i].phase)
break;
}
printf("Unexpected busfree %s\n"
"SEQADDR == 0x%x\n",
phase_table[i].phasemsg, ahc_inb(ahc, SEQADDR0)
| (ahc_inb(ahc, SEQADDR1) << 8));
}
ahc_clear_msg_state(ahc);
ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE);
ahc_outb(ahc, CLRSINT1, CLRBUSFREE|CLRSCSIPERR);
ahc_outb(ahc, CLRINT, CLRSCSIINT);
restart_sequencer(ahc);
} else if ((status & SELTO) != 0) {
u_int scbptr;
scbptr = ahc_inb(ahc, WAITING_SCBH);
ahc_outb(ahc, SCBPTR, scbptr);
scb_index = ahc_inb(ahc, SCB_TAG);
if (scb_index < ahc->scb_data->numscbs) {
scb = &ahc->scb_data->scbarray[scb_index];
if ((scb->flags & SCB_ACTIVE) == 0)
scb = NULL;
} else
scb = NULL;
if (scb == NULL) {
printf("%s: ahc_intr - referenced scb not "
"valid during SELTO scb(%d, %d)\n",
ahc_name(ahc), scbptr, scb_index);
} else {
ahcsetccbstatus(scb->ccb, CAM_SEL_TIMEOUT);
ahc_freeze_devq(ahc, scb->ccb->ccb_h.path);
}
/* Stop the selection */
ahc_outb(ahc, SCSISEQ, 0);
/* No more pending messages */
ahc_clear_msg_state(ahc);
/*
* Although the driver does not care about the
* 'Selection in Progress' status bit, the busy
* LED does. SELINGO is only cleared by a sucessful
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* selections occur (e.g. no devices on the bus).
*/
ahc_outb(ahc, CLRSINT0, CLRSELINGO);
/* Clear interrupt state */
ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR);
ahc_outb(ahc, CLRINT, CLRSCSIINT);
restart_sequencer(ahc);
} else {
xpt_print_path(scb->ccb->ccb_h.path);
printf("Unknown SCSIINT. Status = 0x%x\n", status);
ahc_outb(ahc, CLRSINT1, status);
ahc_outb(ahc, CLRINT, CLRSCSIINT);
unpause_sequencer(ahc);
}
}
static void
ahc_build_transfer_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
{
/*
* We need to initiate transfer negotiations.
* If our current and goal settings are identical,
* we want to renegotiate due to a check condition.
*/
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
struct ahc_syncrate *rate;
int dowide;
int dosync;
int doppr;
int use_ppr;
u_int period;
u_int ppr_options;
u_int offset;
tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
devinfo->target, &tstate);
dowide = tinfo->current.width != tinfo->goal.width;
dosync = tinfo->current.period != tinfo->goal.period;
doppr = tinfo->current.ppr_options != tinfo->goal.ppr_options;
if (!dowide && !dosync && !doppr) {
dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT;
dosync = tinfo->goal.period != 0;
doppr = tinfo->goal.ppr_options != 0;
}
if (!dowide && !dosync && !doppr) {
panic("ahc_intr: AWAITING_MSG for negotiation, "
"but no negotiation needed\n");
}
use_ppr = (tinfo->current.transport_version >= 3) || doppr;
if (use_ppr) {
ahc_construct_ppr(ahc, tinfo->goal.period, tinfo->goal.offset,
tinfo->goal.width, tinfo->goal.ppr_options);
} else if (dowide) {
ahc_construct_wdtr(ahc, tinfo->goal.width);
} else if (dosync) {
period = tinfo->goal.period;
ppr_options = 0;
rate = ahc_devlimited_syncrate(ahc, &period, &ppr_options);
offset = tinfo->goal.offset;
ahc_validate_offset(ahc, rate, &offset,
tinfo->current.width);
ahc_construct_sdtr(ahc, period, offset);
}
}
static void
ahc_setup_initiator_msgout(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
struct scb *scb)
{
/*
* To facilitate adding multiple messages together,
* each routine should increment the index and len
* variables instead of setting them explicitly.
*/
ahc->msgout_index = 0;
ahc->msgout_len = 0;
if ((scb->flags & SCB_DEVICE_RESET) == 0
&& ahc_inb(ahc, MSG_OUT) == MSG_IDENTIFYFLAG) {
u_int identify_msg;
identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb);
if ((scb->hscb->control & DISCENB) != 0)
identify_msg |= MSG_IDENTIFY_DISCFLAG;
ahc->msgout_buf[ahc->msgout_index++] = identify_msg;
ahc->msgout_len++;
if ((scb->hscb->control & TAG_ENB) != 0) {
ahc->msgout_buf[ahc->msgout_index++] =
scb->ccb->csio.tag_action;
ahc->msgout_buf[ahc->msgout_index++] = scb->hscb->tag;
ahc->msgout_len += 2;
}
}
if (scb->flags & SCB_DEVICE_RESET) {
ahc->msgout_buf[ahc->msgout_index++] = MSG_BUS_DEV_RESET;
ahc->msgout_len++;
xpt_print_path(scb->ccb->ccb_h.path);
printf("Bus Device Reset Message Sent\n");
} else if ((scb->flags & SCB_ABORT) != 0) {
if ((scb->hscb->control & TAG_ENB) != 0)
ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT_TAG;
else
ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT;
ahc->msgout_len++;
xpt_print_path(scb->ccb->ccb_h.path);
printf("Abort Message Sent\n");
} else if ((ahc->targ_msg_req & devinfo->target_mask) != 0
|| (scb->flags & SCB_NEGOTIATE) != 0) {
ahc_build_transfer_msg(ahc, devinfo);
} else {
printf("ahc_intr: AWAITING_MSG for an SCB that "
"does not have a waiting message\n");
printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
devinfo->target_mask);
panic("SCB = %d, SCB Control = %x, MSG_OUT = %x "
"SCB flags = %x", scb->hscb->tag, scb->hscb->control,
ahc_inb(ahc, MSG_OUT), scb->flags);
}
/*
* Clear the MK_MESSAGE flag from the SCB so we aren't
* asked to send this message again.
*/
ahc_outb(ahc, SCB_CONTROL, ahc_inb(ahc, SCB_CONTROL) & ~MK_MESSAGE);
ahc->msgout_index = 0;
ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
}
static void
ahc_setup_target_msgin(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
{
/*
* To facilitate adding multiple messages together,
* each routine should increment the index and len
* variables instead of setting them explicitly.
*/
ahc->msgout_index = 0;
ahc->msgout_len = 0;
if ((ahc->targ_msg_req & devinfo->target_mask) != 0)
ahc_build_transfer_msg(ahc, devinfo);
else
panic("ahc_intr: AWAITING target message with no message");
ahc->msgout_index = 0;
ahc->msg_type = MSG_TYPE_TARGET_MSGIN;
}
static int
ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
{
/*
* What we care about here is if we had an
* outstanding SDTR or WDTR message for this
* target. If we did, this is a signal that
* the target is refusing negotiation.
*/
struct scb *scb;
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
u_int scb_index;
u_int last_msg;
int response = 0;
scb_index = ahc_inb(ahc, SCB_TAG);
scb = &ahc->scb_data->scbarray[scb_index];
tinfo = ahc_fetch_transinfo(ahc, devinfo->channel,
devinfo->our_scsiid,
devinfo->target, &tstate);
/* Might be necessary */
last_msg = ahc_inb(ahc, LAST_MSG);
if (ahc_sent_msg(ahc, MSG_EXT_WDTR, /*full*/FALSE)) {
/* note 8bit xfers */
printf("%s:%c:%d: refuses WIDE negotiation. Using "
"8bit transfers\n", ahc_name(ahc),
devinfo->channel, devinfo->target);
ahc_set_width(ahc, devinfo, scb->ccb->ccb_h.path,
MSG_EXT_WDTR_BUS_8_BIT,
AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
/*paused*/TRUE);
/*
* No need to clear the sync rate. If the target
* did not accept the command, our syncrate is
* unaffected. If the target started the negotiation,
* but rejected our response, we already cleared the
* sync rate before sending our WDTR.
*/
if (tinfo->goal.period) {
u_int period;
u_int ppr_options;
/* Start the sync negotiation */
period = tinfo->goal.period;
ppr_options = 0;
ahc_devlimited_syncrate(ahc, &period, &ppr_options);
ahc->msgout_index = 0;
ahc->msgout_len = 0;
ahc_construct_sdtr(ahc, period, tinfo->goal.offset);
ahc->msgout_index = 0;
response = 1;
}
} else if (ahc_sent_msg(ahc, MSG_EXT_SDTR, /*full*/FALSE)) {
/* note asynch xfers and clear flag */
ahc_set_syncrate(ahc, devinfo, scb->ccb->ccb_h.path,
/*syncrate*/NULL, /*period*/0,
/*offset*/0, /*ppr_options*/0,
AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
/*paused*/TRUE);
printf("%s:%c:%d: refuses synchronous negotiation. "
"Using asynchronous transfers\n",
ahc_name(ahc),
devinfo->channel, devinfo->target);
} else if ((scb->hscb->control & MSG_SIMPLE_Q_TAG) != 0) {
struct ccb_trans_settings neg;
printf("%s:%c:%d: refuses tagged commands. Performing "
"non-tagged I/O\n", ahc_name(ahc),
devinfo->channel, devinfo->target);
ahc_set_tags(ahc, devinfo, FALSE);
neg.flags = CCB_TRANS_CURRENT_SETTINGS;
neg.valid = CCB_TRANS_TQ_VALID;
xpt_setup_ccb(&neg.ccb_h, scb->ccb->ccb_h.path, /*priority*/1);
xpt_async(AC_TRANSFER_NEG, scb->ccb->ccb_h.path, &neg);
/*
* Resend the identify for this CCB as the target
* may believe that the selection is invalid otherwise.
*/
ahc_outb(ahc, SCB_CONTROL, ahc_inb(ahc, SCB_CONTROL)
& ~MSG_SIMPLE_Q_TAG);
scb->hscb->control &= ~MSG_SIMPLE_Q_TAG;
scb->ccb->ccb_h.flags &= ~CAM_TAG_ACTION_VALID;
ahc_outb(ahc, MSG_OUT, MSG_IDENTIFYFLAG);
ahc_outb(ahc, SCSISIGO, ahc_inb(ahc, SCSISIGO) | ATNO);
/*
* Requeue all tagged commands for this target
* currently in our posession so they can be
* converted to untagged commands.
*/
ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
SCB_GET_CHANNEL(ahc, scb),
SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL,
ROLE_INITIATOR, CAM_REQUEUE_REQ,
SEARCH_COMPLETE);
} else {
/*
* Otherwise, we ignore it.
*/
printf("%s:%c:%d: Message reject for %x -- ignored\n",
ahc_name(ahc), devinfo->channel, devinfo->target,
last_msg);
}
return (response);
}
static void
ahc_clear_msg_state(struct ahc_softc *ahc)
{
ahc->msgout_len = 0;
ahc->msgin_index = 0;
ahc->msg_type = MSG_TYPE_NONE;
ahc_outb(ahc, MSG_OUT, MSG_NOOP);
}
static void
ahc_handle_message_phase(struct ahc_softc *ahc, struct cam_path *path)
{
struct ahc_devinfo devinfo;
u_int bus_phase;
int end_session;
ahc_fetch_devinfo(ahc, &devinfo);
end_session = FALSE;
bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
reswitch:
switch (ahc->msg_type) {
case MSG_TYPE_INITIATOR_MSGOUT:
{
int lastbyte;
int phasemis;
int msgdone;
if (ahc->msgout_len == 0)
panic("REQINIT interrupt with no active message");
phasemis = bus_phase != P_MESGOUT;
if (phasemis) {
if (bus_phase == P_MESGIN) {
/*
* Change gears and see if
* this messages is of interest to
* us or should be passed back to
* the sequencer.
*/
ahc_outb(ahc, CLRSINT1, CLRATNO);
ahc->send_msg_perror = FALSE;
ahc->msg_type = MSG_TYPE_INITIATOR_MSGIN;
ahc->msgin_index = 0;
goto reswitch;
}
end_session = TRUE;
break;
}
if (ahc->send_msg_perror) {
ahc_outb(ahc, CLRSINT1, CLRATNO);
ahc_outb(ahc, CLRSINT1, CLRREQINIT);
ahc_outb(ahc, SCSIDATL, MSG_PARITY_ERROR);
break;
}
msgdone = ahc->msgout_index == ahc->msgout_len;
if (msgdone) {
/*
* The target has requested a retry.
* Re-assert ATN, reset our message index to
* 0, and try again.
*/
ahc->msgout_index = 0;
ahc_outb(ahc, SCSISIGO, ahc_inb(ahc, SCSISIGO) | ATNO);
}
lastbyte = ahc->msgout_index == (ahc->msgout_len - 1);
if (lastbyte) {
/* Last byte is signified by dropping ATN */
ahc_outb(ahc, CLRSINT1, CLRATNO);
}
/*
* Clear our interrupt status and present
* the next byte on the bus.
*/
ahc_outb(ahc, CLRSINT1, CLRREQINIT);
ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]);
break;
}
case MSG_TYPE_INITIATOR_MSGIN:
{
int phasemis;
int message_done;
phasemis = bus_phase != P_MESGIN;
if (phasemis) {
ahc->msgin_index = 0;
if (bus_phase == P_MESGOUT
&& (ahc->send_msg_perror == TRUE
|| (ahc->msgout_len != 0
&& ahc->msgout_index == 0))) {
ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
goto reswitch;
}
end_session = TRUE;
break;
}
/* Pull the byte in without acking it */
ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIBUSL);
message_done = ahc_parse_msg(ahc, path, &devinfo);
if (message_done) {
/*
* Clear our incoming message buffer in case there
* is another message following this one.
*/
ahc->msgin_index = 0;
/*
* If this message illicited a response,
* assert ATN so the target takes us to the
* message out phase.
*/
if (ahc->msgout_len != 0)
ahc_outb(ahc, SCSISIGO,
ahc_inb(ahc, SCSISIGO) | ATNO);
} else
ahc->msgin_index++;
/* Ack the byte */
ahc_outb(ahc, CLRSINT1, CLRREQINIT);
ahc_inb(ahc, SCSIDATL);
break;
}
case MSG_TYPE_TARGET_MSGIN:
{
int msgdone;
int msgout_request;
if (ahc->msgout_len == 0)
panic("Target MSGIN with no active message");
/*
* If we interrupted a mesgout session, the initiator
* will not know this until our first REQ. So, we
* only honor mesgout requests after we've sent our
* first byte.
*/
if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0
&& ahc->msgout_index > 0)
msgout_request = TRUE;
else
msgout_request = FALSE;
if (msgout_request) {
/*
* Change gears and see if
* this messages is of interest to
* us or should be passed back to
* the sequencer.
*/
ahc->msg_type = MSG_TYPE_TARGET_MSGOUT;
ahc_outb(ahc, SCSISIGO, P_MESGOUT | BSYO);
ahc->msgin_index = 0;
/* Dummy read to REQ for first byte */
ahc_inb(ahc, SCSIDATL);
ahc_outb(ahc, SXFRCTL0,
ahc_inb(ahc, SXFRCTL0) | SPIOEN);
break;
}
msgdone = ahc->msgout_index == ahc->msgout_len;
if (msgdone) {
ahc_outb(ahc, SXFRCTL0,
ahc_inb(ahc, SXFRCTL0) & ~SPIOEN);
end_session = TRUE;
break;
}
/*
* Present the next byte on the bus.
*/
ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) | SPIOEN);
ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]);
break;
}
case MSG_TYPE_TARGET_MSGOUT:
{
int lastbyte;
int msgdone;
/*
* The initiator signals that this is
* the last byte by dropping ATN.
*/
lastbyte = (ahc_inb(ahc, SCSISIGI) & ATNI) == 0;
/*
* Read the latched byte, but turn off SPIOEN first
* so that we don't inadvertantly cause a REQ for the
* next byte.
*/
ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) & ~SPIOEN);
ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIDATL);
msgdone = ahc_parse_msg(ahc, path, &devinfo);
if (msgdone == MSGLOOP_TERMINATED) {
/*
* The message is *really* done in that it caused
* us to go to bus free. The sequencer has already
* been reset at this point, so pull the ejection
* handle.
*/
return;
}
ahc->msgin_index++;
/*
* XXX Read spec about initiator dropping ATN too soon
* and use msgdone to detect it.
*/
if (msgdone == MSGLOOP_MSGCOMPLETE) {
ahc->msgin_index = 0;
/*
* If this message illicited a response, transition
* to the Message in phase and send it.
*/
if (ahc->msgout_len != 0) {
ahc_outb(ahc, SCSISIGO, P_MESGIN | BSYO);
ahc_outb(ahc, SXFRCTL0,
ahc_inb(ahc, SXFRCTL0) | SPIOEN);
ahc->msg_type = MSG_TYPE_TARGET_MSGIN;
ahc->msgin_index = 0;
break;
}
}
if (lastbyte)
end_session = TRUE;
else {
/* Ask for the next byte. */
ahc_outb(ahc, SXFRCTL0,
ahc_inb(ahc, SXFRCTL0) | SPIOEN);
}
break;
}
default:
panic("Unknown REQINIT message type");
}
if (end_session) {
ahc_clear_msg_state(ahc);
ahc_outb(ahc, RETURN_1, EXIT_MSG_LOOP);
} else
ahc_outb(ahc, RETURN_1, CONT_MSG_LOOP);
}
/*
* See if we sent a particular extended message to the target.
* If "full" is true, the target saw the full message.
* If "full" is false, the target saw at least the first
* byte of the message.
*/
static int
ahc_sent_msg(struct ahc_softc *ahc, u_int msgtype, int full)
{
int found;
u_int index;
found = FALSE;
index = 0;
while (index < ahc->msgout_len) {
if (ahc->msgout_buf[index] == MSG_EXTENDED) {
/* Found a candidate */
if (ahc->msgout_buf[index+2] == msgtype) {
u_int end_index;
end_index = index + 1
+ ahc->msgout_buf[index + 1];
if (full) {
if (ahc->msgout_index > end_index)
found = TRUE;
} else if (ahc->msgout_index > index)
found = TRUE;
}
break;
} else if (ahc->msgout_buf[index] >= MSG_SIMPLE_Q_TAG
&& ahc->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) {
/* Skip tag type and tag id or residue param*/
index += 2;
} else {
/* Single byte message */
index++;
}
}
return (found);
}
static int
ahc_parse_msg(struct ahc_softc *ahc, struct cam_path *path,
struct ahc_devinfo *devinfo)
{
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
int reject;
int done;
int response;
u_int targ_scsirate;
done = MSGLOOP_IN_PROG;
response = FALSE;
reject = FALSE;
tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
devinfo->target, &tstate);
targ_scsirate = tinfo->scsirate;
/*
* Parse as much of the message as is availible,
* rejecting it if we don't support it. When
* the entire message is availible and has been
* handled, return MSGLOOP_MSGCOMPLETE, indicating
* that we have parsed an entire message.
*
* In the case of extended messages, we accept the length
* byte outright and perform more checking once we know the
* extended message type.
*/
switch (ahc->msgin_buf[0]) {
case MSG_MESSAGE_REJECT:
response = ahc_handle_msg_reject(ahc, devinfo);
/* FALLTHROUGH */
case MSG_NOOP:
done = MSGLOOP_MSGCOMPLETE;
break;
case MSG_EXTENDED:
{
/* Wait for enough of the message to begin validation */
if (ahc->msgin_index < 2)
break;
switch (ahc->msgin_buf[2]) {
case MSG_EXT_SDTR:
{
struct ahc_syncrate *syncrate;
u_int period;
u_int ppr_options;
u_int offset;
u_int saved_offset;
if (ahc->msgin_buf[1] != MSG_EXT_SDTR_LEN) {
reject = TRUE;
break;
}
/*
* Wait until we have both args before validating
* and acting on this message.
*
* Add one to MSG_EXT_SDTR_LEN to account for
* the extended message preamble.
*/
if (ahc->msgin_index < (MSG_EXT_SDTR_LEN + 1))
break;
period = ahc->msgin_buf[3];
ppr_options = 0;
saved_offset = offset = ahc->msgin_buf[4];
syncrate = ahc_devlimited_syncrate(ahc, &period,
&ppr_options);
ahc_validate_offset(ahc, syncrate, &offset,
targ_scsirate & WIDEXFER);
ahc_set_syncrate(ahc, devinfo, path,
syncrate, period,
offset, ppr_options,
AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
/*paused*/TRUE);
/*
* See if we initiated Sync Negotiation
* and didn't have to fall down to async
* transfers.
*/
if (ahc_sent_msg(ahc, MSG_EXT_SDTR, /*full*/TRUE)) {
/* We started it */
if (saved_offset != offset) {
/* Went too low - force async */
reject = TRUE;
}
} else {
/*
* Send our own SDTR in reply
*/
if (bootverbose)
printf("Sending SDTR!\n");
ahc->msgout_index = 0;
ahc->msgout_len = 0;
ahc_construct_sdtr(ahc, period, offset);
ahc->msgout_index = 0;
response = TRUE;
}
done = MSGLOOP_MSGCOMPLETE;
break;
}
case MSG_EXT_WDTR:
{
u_int bus_width;
u_int saved_width;
u_int sending_reply;
sending_reply = FALSE;
if (ahc->msgin_buf[1] != MSG_EXT_WDTR_LEN) {
reject = TRUE;
break;
}
/*
* Wait until we have our arg before validating
* and acting on this message.
*
* Add one to MSG_EXT_WDTR_LEN to account for
* the extended message preamble.
*/
if (ahc->msgin_index < (MSG_EXT_WDTR_LEN + 1))
break;
bus_width = ahc->msgin_buf[3];
saved_width = bus_width;
ahc_validate_width(ahc, &bus_width);
if (ahc_sent_msg(ahc, MSG_EXT_WDTR, /*full*/TRUE)) {
/*
* Don't send a WDTR back to the
* target, since we asked first.
* If the width went higher than our
* request, reject it.
*/
if (saved_width > bus_width) {
reject = TRUE;
printf("%s: target %d requested %dBit "
"transfers. Rejecting...\n",
ahc_name(ahc), devinfo->target,
8 * (0x01 << bus_width));
bus_width = 0;
}
} else {
/*
* Send our own WDTR in reply
*/
if (bootverbose)
printf("Sending WDTR!\n");
ahc->msgout_index = 0;
ahc->msgout_len = 0;
ahc_construct_wdtr(ahc, bus_width);
ahc->msgout_index = 0;
response = TRUE;
sending_reply = TRUE;
}
ahc_set_width(ahc, devinfo, path, bus_width,
AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
/*paused*/TRUE);
/* After a wide message, we are async */
ahc_set_syncrate(ahc, devinfo, path,
/*syncrate*/NULL, /*period*/0,
/*offset*/0, /*ppr_options*/0,
AHC_TRANS_ACTIVE, /*paused*/TRUE);
if (sending_reply == FALSE && reject == FALSE) {
/* XXX functionalize */
if (tinfo->goal.period) {
struct ahc_syncrate *rate;
u_int period;
u_int ppr;
u_int offset;
/* Start the sync negotiation */
period = tinfo->goal.period;
ppr = 0;
rate = ahc_devlimited_syncrate(ahc,
&period,
&ppr);
offset = tinfo->goal.offset;
ahc_validate_offset(ahc, rate, &offset,
tinfo->current.width);
ahc->msgout_index = 0;
ahc->msgout_len = 0;
ahc_construct_sdtr(ahc, period, offset);
ahc->msgout_index = 0;
response = TRUE;
}
}
done = MSGLOOP_MSGCOMPLETE;
break;
}
case MSG_EXT_PPR:
{
struct ahc_syncrate *syncrate;
u_int period;
u_int offset;
u_int bus_width;
u_int ppr_options;
u_int saved_width;
u_int saved_offset;
u_int saved_ppr_options;
if (ahc->msgin_buf[1] != MSG_EXT_PPR_LEN) {
reject = TRUE;
break;
}
/*
* Wait until we have all args before validating
* and acting on this message.
*
* Add one to MSG_EXT_PPR_LEN to account for
* the extended message preamble.
*/
if (ahc->msgin_index < (MSG_EXT_PPR_LEN + 1))
break;
period = ahc->msgin_buf[3];
offset = ahc->msgin_buf[5];
bus_width = ahc->msgin_buf[6];
saved_width = bus_width;
ppr_options = ahc->msgin_buf[7];
/*
* According to the spec, a DT only
* period factor with no DT option
* set implies async.
*/
if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0
&& period == 9)
offset = 0;
saved_ppr_options = ppr_options;
saved_offset = offset;
/*
* Mask out any options we don't support
* on any controller. Transfer options are
* only available if we are negotiating wide.
*/
ppr_options &= MSG_EXT_PPR_DT_REQ;
if (bus_width == 0)
ppr_options = 0;
ahc_validate_width(ahc, &bus_width);
syncrate = ahc_devlimited_syncrate(ahc, &period,
&ppr_options);
ahc_validate_offset(ahc, syncrate, &offset, bus_width);
if (ahc_sent_msg(ahc, MSG_EXT_PPR, /*full*/TRUE)) {
/*
* If we are unable to do any of the
* requested options (we went too low),
* then we'll have to reject the message.
*/
if (saved_width > bus_width
|| saved_offset != offset
|| saved_ppr_options != ppr_options)
reject = TRUE;
} else {
printf("Target Initated PPR detected!\n");
response = TRUE;
}
ahc_set_syncrate(ahc, devinfo, path,
syncrate, period,
offset, ppr_options,
AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
/*paused*/TRUE);
ahc_set_width(ahc, devinfo, path, bus_width,
AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
/*paused*/TRUE);
break;
}
default:
/* Unknown extended message. Reject it. */
reject = TRUE;
break;
}
break;
}
case MSG_BUS_DEV_RESET:
ahc_handle_devreset(ahc, devinfo,
CAM_BDR_SENT, AC_SENT_BDR,
"Bus Device Reset Received",
/*verbose_level*/0);
restart_sequencer(ahc);
done = MSGLOOP_TERMINATED;
break;
case MSG_ABORT_TAG:
case MSG_ABORT:
case MSG_CLEAR_QUEUE:
/* Target mode messages */
if (devinfo->role != ROLE_TARGET) {
reject = TRUE;
break;
}
ahc_abort_scbs(ahc, devinfo->target, devinfo->channel,
devinfo->lun,
ahc->msgin_buf[0] == MSG_ABORT_TAG
? SCB_LIST_NULL
: ahc_inb(ahc, INITIATOR_TAG),
ROLE_TARGET, CAM_REQ_ABORTED);
tstate = ahc->enabled_targets[devinfo->our_scsiid];
if (tstate != NULL) {
struct tmode_lstate* lstate;
lstate = tstate->enabled_luns[devinfo->lun];
if (lstate != NULL) {
ahc_queue_lstate_event(ahc, lstate,
devinfo->our_scsiid,
ahc->msgin_buf[0],
/*arg*/0);
ahc_send_lstate_events(ahc, lstate);
}
}
done = MSGLOOP_MSGCOMPLETE;
break;
case MSG_TERM_IO_PROC:
default:
reject = TRUE;
break;
}
if (reject) {
/*
* Setup to reject the message.
*/
ahc->msgout_index = 0;
ahc->msgout_len = 1;
ahc->msgout_buf[0] = MSG_MESSAGE_REJECT;
done = MSGLOOP_MSGCOMPLETE;
response = TRUE;
}
if (done != MSGLOOP_IN_PROG && !response)
/* Clear the outgoing message buffer */
ahc->msgout_len = 0;
return (done);
}
static void
ahc_handle_ign_wide_residue(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
{
u_int scb_index;
struct scb *scb;
scb_index = ahc_inb(ahc, SCB_TAG);
scb = &ahc->scb_data->scbarray[scb_index];
if ((ahc_inb(ahc, SEQ_FLAGS) & DPHASE) == 0
|| (scb->ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_IN) {
/*
* Ignore the message if we haven't
* seen an appropriate data phase yet.
*/
} else {
/*
* If the residual occurred on the last
* transfer and the transfer request was
* expected to end on an odd count, do
* nothing. Otherwise, subtract a byte
* and update the residual count accordingly.
*/
uint32_t sgptr;
sgptr = ahc_inb(ahc, SCB_RESIDUAL_SGPTR);
if ((sgptr & SG_LIST_NULL) != 0
&& ahc_inb(ahc, DATA_COUNT_ODD) == 1) {
/*
* If the residual occurred on the last
* transfer and the transfer request was
* expected to end on an odd count, do
* nothing.
*/
} else {
struct ahc_dma_seg *sg;
uint32_t data_cnt;
uint32_t data_addr;
/* Pull in the rest of the sgptr */
sgptr |= (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 3) << 24)
| (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 2) << 16)
| (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 1) << 8);
sgptr &= SG_PTR_MASK;
data_cnt = (ahc_inb(ahc, SCB_RESIDUAL_DATACNT+2) << 16)
| (ahc_inb(ahc, SCB_RESIDUAL_DATACNT+1) << 8)
| (ahc_inb(ahc, SCB_RESIDUAL_DATACNT));
data_addr = (ahc_inb(ahc, SHADDR + 3) << 24)
| (ahc_inb(ahc, SHADDR + 2) << 16)
| (ahc_inb(ahc, SHADDR + 1) << 8)
| (ahc_inb(ahc, SHADDR));
data_cnt += 1;
data_addr -= 1;
sg = ahc_sg_bus_to_virt(scb, sgptr);
/*
* The residual sg ptr points to the next S/G
* to load so we must go back one.
*/
sg--;
if (sg != scb->sg_list
&& (sg->len & AHC_SG_LEN_MASK) < data_cnt) {
sg--;
data_cnt = 1 | (sg->len & AHC_DMA_LAST_SEG);
data_addr = sg->addr
+ (sg->len & AHC_SG_LEN_MASK) - 1;
/*
* Increment sg so it points to the
* "next" sg.
*/
sg++;
sgptr = ahc_sg_virt_to_bus(scb, sg);
ahc_outb(ahc, SCB_RESIDUAL_SGPTR + 3,
sgptr >> 24);
ahc_outb(ahc, SCB_RESIDUAL_SGPTR + 2,
sgptr >> 16);
ahc_outb(ahc, SCB_RESIDUAL_SGPTR + 1,
sgptr >> 8);
ahc_outb(ahc, SCB_RESIDUAL_SGPTR, sgptr);
}
/* XXX What about high address byte??? */
ahc_outb(ahc, SCB_RESIDUAL_DATACNT + 3, data_cnt >> 24);
ahc_outb(ahc, SCB_RESIDUAL_DATACNT + 2, data_cnt >> 16);
ahc_outb(ahc, SCB_RESIDUAL_DATACNT + 1, data_cnt >> 8);
ahc_outb(ahc, SCB_RESIDUAL_DATACNT, data_cnt);
/* XXX Perhaps better to just keep the saved address in sram */
if ((ahc->features & AHC_ULTRA2) != 0) {
ahc_outb(ahc, HADDR + 3, data_addr >> 24);
ahc_outb(ahc, HADDR + 2, data_addr >> 16);
ahc_outb(ahc, HADDR + 1, data_addr >> 8);
ahc_outb(ahc, HADDR, data_addr);
ahc_outb(ahc, DFCNTRL, PRELOADEN);
ahc_outb(ahc, SXFRCTL0,
ahc_inb(ahc, SXFRCTL0) | CLRCHN);
} else {
ahc_outb(ahc, SHADDR + 3, data_addr >> 24);
ahc_outb(ahc, SHADDR + 2, data_addr >> 16);
ahc_outb(ahc, SHADDR + 1, data_addr >> 8);
ahc_outb(ahc, SHADDR, data_addr);
}
}
}
}
static void
ahc_handle_devreset(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
cam_status status, ac_code acode, char *message,
int verbose_level)
{
struct cam_path *path;
int found;
int error;
struct tmode_tstate* tstate;
u_int lun;
error = ahc_create_path(ahc, devinfo, &path);
found = ahc_abort_scbs(ahc, devinfo->target, devinfo->channel,
CAM_LUN_WILDCARD, SCB_LIST_NULL, devinfo->role,
status);
/*
* Send an immediate notify ccb to all target more peripheral
* drivers affected by this action.
*/
tstate = ahc->enabled_targets[devinfo->our_scsiid];
if (tstate != NULL) {
for (lun = 0; lun <= 7; lun++) {
struct tmode_lstate* lstate;
lstate = tstate->enabled_luns[lun];
if (lstate == NULL)
continue;
ahc_queue_lstate_event(ahc, lstate, devinfo->our_scsiid,
MSG_BUS_DEV_RESET, /*arg*/0);
ahc_send_lstate_events(ahc, lstate);
}
}
/*
* Go back to async/narrow transfers and renegotiate.
* ahc_set_width and ahc_set_syncrate can cope with NULL
* paths.
*/
ahc_set_width(ahc, devinfo, path, MSG_EXT_WDTR_BUS_8_BIT,
AHC_TRANS_CUR, /*paused*/TRUE);
ahc_set_syncrate(ahc, devinfo, path, /*syncrate*/NULL,
/*period*/0, /*offset*/0, /*ppr_options*/0,
AHC_TRANS_CUR, /*paused*/TRUE);
if (error == CAM_REQ_CMP && acode != 0)
xpt_async(AC_SENT_BDR, path, NULL);
if (error == CAM_REQ_CMP)
xpt_free_path(path);
if (message != NULL
&& (verbose_level <= bootverbose))
printf("%s: %s on %c:%d. %d SCBs aborted\n", ahc_name(ahc),
message, devinfo->channel, devinfo->target, found);
}
/*
* We have an scb which has been processed by the
* adaptor, now we look to see how the operation
* went.
*/
static void
ahc_done(struct ahc_softc *ahc, struct scb *scb)
{
union ccb *ccb;
CAM_DEBUG(scb->ccb->ccb_h.path, CAM_DEBUG_TRACE,
("ahc_done - scb %d\n", scb->hscb->tag));
ccb = scb->ccb;
LIST_REMOVE(&ccb->ccb_h, sim_links.le);
if (ccb->ccb_h.func_code == XPT_SCSI_IO
&& ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) == 0
|| ccb->csio.tag_action == CAM_TAG_ACTION_NONE)
&& (ahc->features & AHC_SCB_BTT) == 0) {
struct scb_tailq *untagged_q;
untagged_q = &ahc->untagged_queues[ccb->ccb_h.target_id];
TAILQ_REMOVE(untagged_q, scb, links.tqe);
ahc_run_untagged_queue(ahc, untagged_q);
}
untimeout(ahc_timeout, (caddr_t)scb, ccb->ccb_h.timeout_ch);
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
bus_dmasync_op_t op;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_POSTREAD;
else
op = BUS_DMASYNC_POSTWRITE;
bus_dmamap_sync(ahc->buffer_dmat, scb->dmamap, op);
bus_dmamap_unload(ahc->buffer_dmat, scb->dmamap);
}
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
if (ahc_ccb_status(ccb) == CAM_REQ_INPROG)
ccb->ccb_h.status |= CAM_REQ_CMP;
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ahcfreescb(ahc, scb);
xpt_done(ccb);
return;
}
/*
* If the recovery SCB completes, we have to be
* out of our timeout.
*/
if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
struct ccb_hdr *ccbh;
/*
* We were able to complete the command successfully,
* so reinstate the timeouts for all other pending
* commands.
*/
ccbh = ahc->pending_ccbs.lh_first;
while (ccbh != NULL) {
struct scb *pending_scb;
pending_scb = (struct scb *)ccbh->ccb_scb_ptr;
ccbh->timeout_ch =
timeout(ahc_timeout, pending_scb,
(ccbh->timeout * hz)/1000);
ccbh = LIST_NEXT(ccbh, sim_links.le);
}
/*
* Ensure that we didn't put a second instance of this
* SCB into the QINFIFO.
*/
ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
SCB_GET_CHANNEL(ahc, scb),
SCB_GET_LUN(scb), scb->hscb->tag,
ROLE_INITIATOR, /*status*/0,
SEARCH_REMOVE);
if (ahc_ccb_status(ccb) == CAM_BDR_SENT
|| ahc_ccb_status(ccb) == CAM_REQ_ABORTED)
ahcsetccbstatus(ccb, CAM_CMD_TIMEOUT);
xpt_print_path(ccb->ccb_h.path);
printf("no longer in timeout, status = %x\n",
ccb->ccb_h.status);
}
/* Don't clobber any existing error state */
if (ahc_ccb_status(ccb) == CAM_REQ_INPROG) {
ccb->ccb_h.status |= CAM_REQ_CMP;
} else if ((scb->flags & SCB_SENSE) != 0) {
/*
* We performed autosense retrieval.
*
* bzero the sense data before having
* the drive fill it. The SCSI spec mandates
* that any untransfered data should be
* assumed to be zero. Complete the 'bounce'
* of sense information through buffers accessible
* via bus-space by copying it into the clients
* csio.
*/
bzero(&ccb->csio.sense_data, sizeof(ccb->csio.sense_data));
bcopy(&ahc->scb_data->sense[scb->hscb->tag],
&ccb->csio.sense_data,
scb->sg_list->len & AHC_SG_LEN_MASK);
scb->ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ahcfreescb(ahc, scb);
xpt_done(ccb);
}
/*
* Determine the number of SCBs available on the controller
*/
int
ahc_probe_scbs(struct ahc_softc *ahc) {
int i;
for (i = 0; i < AHC_SCB_MAX; i++) {
ahc_outb(ahc, SCBPTR, i);
ahc_outb(ahc, SCB_CONTROL, i);
if (ahc_inb(ahc, SCB_CONTROL) != i)
break;
ahc_outb(ahc, SCBPTR, 0);
if (ahc_inb(ahc, SCB_CONTROL) != 0)
break;
}
return (i);
}
/*
* Start the board, ready for normal operation
*/
int
ahc_init(struct ahc_softc *ahc)
{
int max_targ = 15;
int i;
int term;
u_int scsi_conf;
u_int scsiseq_template;
u_int ultraenb;
u_int discenable;
u_int tagenable;
size_t driver_data_size;
uint32_t physaddr;
#ifdef AHC_PRINT_SRAM
printf("Scratch Ram:");
for (i = 0x20; i < 0x5f; i++) {
if (((i % 8) == 0) && (i != 0)) {
printf ("\n ");
}
printf (" 0x%x", ahc_inb(ahc, i));
}
if ((ahc->features & AHC_MORE_SRAM) != 0) {
for (i = 0x70; i < 0x7f; i++) {
if (((i % 8) == 0) && (i != 0)) {
printf ("\n ");
}
printf (" 0x%x", ahc_inb(ahc, i));
}
}
printf ("\n");
#endif
/*
* Assume we have a board at this stage and it has been reset.
*/
if ((ahc->flags & AHC_USEDEFAULTS) != 0)
ahc->our_id = ahc->our_id_b = 7;
/*
* Default to allowing initiator operations.
*/
ahc->flags |= AHC_INITIATORMODE;
/*
* XXX Would be better to use a per device flag, but PCI and EISA
* devices don't have them yet.
*/
if ((AHC_TMODE_ENABLE & (0x01 << ahc->unit)) != 0) {
ahc->flags |= AHC_TARGETMODE;
/*
* Although we have space for both the initiator and
* target roles on ULTRA2 chips, we currently disable
* the initiator role to allow multi-scsi-id target mode
* configurations. We can only respond on the same SCSI
* ID as our initiator role if we allow initiator operation.
* At some point, we should add a configuration knob to
* allow both roles to be loaded.
*/
ahc->flags &= ~AHC_INITIATORMODE;
}
/* DMA tag for mapping buffers into device visible space. */
if (bus_dma_tag_create(ahc->parent_dmat, /*alignment*/1, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/MAXBSIZE, /*nsegments*/AHC_NSEG,
/*maxsegsz*/AHC_MAXTRANSFER_SIZE,
/*flags*/BUS_DMA_ALLOCNOW,
&ahc->buffer_dmat) != 0) {
return (ENOMEM);
}
ahc->init_level++;
/*
* DMA tag for our command fifos and other data in system memory
* the card's sequencer must be able to access. For initiator
* roles, we need to allocate space for the the qinfifo and qoutfifo.
* The qinfifo and qoutfifo are composed of 256 1 byte elements.
* When providing for the target mode role, we additionally must
* provide space for the incoming target command fifo and an extra
* byte to deal with a dma bug in some chip versions.
*/
driver_data_size = 2 * 256 * sizeof(uint8_t);
if ((ahc->flags & AHC_TARGETMODE) != 0)
driver_data_size += AHC_TMODE_CMDS * sizeof(struct target_cmd)
+ /*DMA WideOdd Bug Buffer*/1;
if (bus_dma_tag_create(ahc->parent_dmat, /*alignment*/1, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
driver_data_size,
/*nsegments*/1,
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
/*flags*/0, &ahc->shared_data_dmat) != 0) {
return (ENOMEM);
}
ahc->init_level++;
/* Allocation of driver data */
if (bus_dmamem_alloc(ahc->shared_data_dmat,
(void **)&ahc->qoutfifo,
BUS_DMA_NOWAIT, &ahc->shared_data_dmamap) != 0) {
return (ENOMEM);
}
ahc->init_level++;
/* And permanently map it in */
bus_dmamap_load(ahc->shared_data_dmat, ahc->shared_data_dmamap,
ahc->qoutfifo, driver_data_size, ahcdmamapcb,
&ahc->shared_data_busaddr, /*flags*/0);
if ((ahc->flags & AHC_TARGETMODE) != 0) {
ahc->targetcmds = (struct target_cmd *)ahc->qoutfifo;
ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[256];
ahc->dma_bug_buf = ahc->shared_data_busaddr
+ driver_data_size - 1;
/* All target command blocks start out invalid. */
for (i = 0; i < AHC_TMODE_CMDS; i++)
ahc->targetcmds[i].cmd_valid = 0;
ahc->tqinfifonext = 1;
ahc_outb(ahc, KERNEL_TQINPOS, ahc->tqinfifonext - 1);
ahc_outb(ahc, TQINPOS, ahc->tqinfifonext);
ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[256];
}
ahc->qinfifo = &ahc->qoutfifo[256];
ahc->init_level++;
/* Allocate SCB data now that buffer_dmat is initialized */
if (ahc->scb_data->maxhscbs == 0)
if (ahcinitscbdata(ahc) != 0)
return (ENOMEM);
/*
* Allocate a tstate to house information for our
* initiator presence on the bus as well as the user
* data for any target mode initiator.
*/
if (ahc_alloc_tstate(ahc, ahc->our_id, 'A') == NULL) {
printf("%s: unable to allocate tmode_tstate. "
"Failing attach\n", ahc_name(ahc));
return (-1);
}
if ((ahc->features & AHC_TWIN) != 0) {
if (ahc_alloc_tstate(ahc, ahc->our_id_b, 'B') == NULL) {
printf("%s: unable to allocate tmode_tstate. "
"Failing attach\n", ahc_name(ahc));
return (-1);
}
printf("Twin Channel, A SCSI Id=%d, B SCSI Id=%d, primary %c, ",
ahc->our_id, ahc->our_id_b,
ahc->flags & AHC_CHANNEL_B_PRIMARY? 'B': 'A');
} else {
if ((ahc->features & AHC_WIDE) != 0) {
printf("Wide ");
} else {
printf("Single ");
}
printf("Channel %c, SCSI Id=%d, ", ahc->channel, ahc->our_id);
}
ahc_outb(ahc, SEQ_FLAGS, 0);
if (ahc->scb_data->maxhscbs < AHC_SCB_MAX) {
ahc->flags |= AHC_PAGESCBS;
printf("%d/%d SCBs\n", ahc->scb_data->maxhscbs, AHC_SCB_MAX);
} else {
ahc->flags &= ~AHC_PAGESCBS;
printf("%d SCBs\n", ahc->scb_data->maxhscbs);
}
#ifdef AHC_DEBUG
if (ahc_debug & AHC_SHOWMISC) {
printf("%s: hardware scb %d bytes; kernel scb %d bytes; "
"ahc_dma %d bytes\n",
ahc_name(ahc),
sizeof(struct hardware_scb),
sizeof(struct scb),
sizeof(struct ahc_dma_seg));
}
#endif /* AHC_DEBUG */
/* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1, for both channels*/
if (ahc->features & AHC_TWIN) {
/*
* The device is gated to channel B after a chip reset,
* so set those values first
*/
term = (ahc->flags & AHC_TERM_ENB_B) != 0 ? STPWEN : 0;
if ((ahc->features & AHC_ULTRA2) != 0)
ahc_outb(ahc, SCSIID_ULTRA2, ahc->our_id_b);
else
ahc_outb(ahc, SCSIID, ahc->our_id_b);
scsi_conf = ahc_inb(ahc, SCSICONF + 1);
ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL))
|term|ENSTIMER|ACTNEGEN);
ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN);
if ((scsi_conf & RESET_SCSI) != 0
&& (ahc->flags & AHC_INITIATORMODE) != 0)
ahc->flags |= AHC_RESET_BUS_B;
/* Select Channel A */
ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB);
}
term = (ahc->flags & AHC_TERM_ENB_A) != 0 ? STPWEN : 0;
if ((ahc->features & AHC_ULTRA2) != 0)
ahc_outb(ahc, SCSIID_ULTRA2, ahc->our_id);
else
ahc_outb(ahc, SCSIID, ahc->our_id);
scsi_conf = ahc_inb(ahc, SCSICONF);
ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL))
|term
|ENSTIMER|ACTNEGEN);
ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN);
if ((scsi_conf & RESET_SCSI) != 0
&& (ahc->flags & AHC_INITIATORMODE) != 0)
ahc->flags |= AHC_RESET_BUS_A;
/*
* Look at the information that board initialization or
* the board bios has left us.
*/
ultraenb = 0;
tagenable = ALL_TARGETS_MASK;
/* Grab the disconnection disable table and invert it for our needs */
if (ahc->flags & AHC_USEDEFAULTS) {
printf("%s: Host Adapter Bios disabled. Using default SCSI "
"device parameters\n", ahc_name(ahc));
ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B|
AHC_TERM_ENB_A|AHC_TERM_ENB_B;
discenable = ALL_TARGETS_MASK;
if ((ahc->features & AHC_ULTRA) != 0)
ultraenb = ALL_TARGETS_MASK;
} else {
discenable = ~((ahc_inb(ahc, DISC_DSB + 1) << 8)
| ahc_inb(ahc, DISC_DSB));
if ((ahc->features & (AHC_ULTRA|AHC_ULTRA2)) != 0)
ultraenb = (ahc_inb(ahc, ULTRA_ENB + 1) << 8)
| ahc_inb(ahc, ULTRA_ENB);
}
if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
max_targ = 7;
for (i = 0; i <= max_targ; i++) {
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
u_int our_id;
u_int target_id;
char channel;
channel = 'A';
our_id = ahc->our_id;
target_id = i;
if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
channel = 'B';
our_id = ahc->our_id_b;
target_id = i % 8;
}
tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
target_id, &tstate);
/* Default to async narrow across the board */
bzero(tinfo, sizeof(*tinfo));
if (ahc->flags & AHC_USEDEFAULTS) {
if ((ahc->features & AHC_WIDE) != 0)
tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
/*
* These will be truncated when we determine the
* connection type we have with the target.
*/
tinfo->user.period = ahc_syncrates->period;
tinfo->user.offset = ~0;
} else {
u_int scsirate;
uint16_t mask;
/* Take the settings leftover in scratch RAM. */
scsirate = ahc_inb(ahc, TARG_SCSIRATE + i);
mask = (0x01 << i);
if ((ahc->features & AHC_ULTRA2) != 0) {
u_int offset;
u_int maxsync;
if ((scsirate & SOFS) == 0x0F) {
/*
* Haven't negotiated yet,
* so the format is different.
*/
scsirate = (scsirate & SXFR) >> 4
| (ultraenb & mask)
? 0x08 : 0x0
| (scsirate & WIDEXFER);
offset = MAX_OFFSET_ULTRA2;
} else
offset = ahc_inb(ahc, TARG_OFFSET + i);
maxsync = AHC_SYNCRATE_ULTRA2;
if ((ahc->features & AHC_DT) != 0)
maxsync = AHC_SYNCRATE_DT;
tinfo->user.period =
ahc_find_period(ahc, scsirate, maxsync);
if (offset == 0)
tinfo->user.period = 0;
else
tinfo->user.offset = ~0;
if ((scsirate & SXFR_ULTRA2) <= 8/*10MHz*/
&& (ahc->features & AHC_DT) != 0)
tinfo->user.ppr_options =
MSG_EXT_PPR_DT_REQ;
} else if ((scsirate & SOFS) != 0) {
tinfo->user.period =
ahc_find_period(ahc, scsirate,
(ultraenb & mask)
? AHC_SYNCRATE_ULTRA
: AHC_SYNCRATE_FAST);
if (tinfo->user.period != 0)
tinfo->user.offset = ~0;
}
if ((scsirate & WIDEXFER) != 0
&& (ahc->features & AHC_WIDE) != 0)
tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
tinfo->user.protocol_version = 4;
if ((ahc->features & AHC_DT) != 0)
tinfo->user.transport_version = 3;
else
tinfo->user.transport_version = 2;
tinfo->goal.protocol_version = 2;
tinfo->goal.transport_version = 2;
tinfo->current.protocol_version = 2;
tinfo->current.transport_version = 2;
}
tstate->ultraenb = ultraenb;
tstate->discenable = discenable;
tstate->tagenable = 0; /* Wait until the XPT says its okay */
}
ahc->user_discenable = discenable;
ahc->user_tagenable = tagenable;
/* There are no untagged SCBs active yet. */
for (i = 0; i < 16; i++) {
ahc_index_busy_tcl(ahc, BUILD_TCL(i << 4, 0), /*unbusy*/TRUE);
if ((ahc->features & AHC_SCB_BTT) != 0) {
int lun;
/*
* The SCB based BTT allows an entry per
* target and lun pair.
*/
for (lun = 1; lun < AHC_NUM_LUNS; lun++) {
ahc_index_busy_tcl(ahc,
BUILD_TCL(i << 4, lun),
/*unbusy*/TRUE);
}
}
}
/* All of our queues are empty */
for (i = 0; i < 256; i++)
ahc->qoutfifo[i] = SCB_LIST_NULL;
for (i = 0; i < 256; i++)
ahc->qinfifo[i] = SCB_LIST_NULL;
if ((ahc->features & AHC_MULTI_TID) != 0) {
ahc_outb(ahc, TARGID, 0);
ahc_outb(ahc, TARGID + 1, 0);
}
/*
* Tell the sequencer where it can find our arrays in memory.
*/
physaddr = ahc->scb_data->hscb_busaddr;
ahc_outb(ahc, HSCB_ADDR, physaddr & 0xFF);
ahc_outb(ahc, HSCB_ADDR + 1, (physaddr >> 8) & 0xFF);
ahc_outb(ahc, HSCB_ADDR + 2, (physaddr >> 16) & 0xFF);
ahc_outb(ahc, HSCB_ADDR + 3, (physaddr >> 24) & 0xFF);
physaddr = ahc->shared_data_busaddr;
ahc_outb(ahc, SHARED_DATA_ADDR, physaddr & 0xFF);
ahc_outb(ahc, SHARED_DATA_ADDR + 1, (physaddr >> 8) & 0xFF);
ahc_outb(ahc, SHARED_DATA_ADDR + 2, (physaddr >> 16) & 0xFF);
ahc_outb(ahc, SHARED_DATA_ADDR + 3, (physaddr >> 24) & 0xFF);
/*
* Initialize the group code to command length table.
* This overrides the values in TARG_SCSIRATE, so only
* setup the table after we have processed that information.
*/
ahc_outb(ahc, CMDSIZE_TABLE, 5);
ahc_outb(ahc, CMDSIZE_TABLE + 1, 9);
ahc_outb(ahc, CMDSIZE_TABLE + 2, 9);
ahc_outb(ahc, CMDSIZE_TABLE + 3, 0);
ahc_outb(ahc, CMDSIZE_TABLE + 4, 15);
ahc_outb(ahc, CMDSIZE_TABLE + 5, 11);
ahc_outb(ahc, CMDSIZE_TABLE + 6, 0);
ahc_outb(ahc, CMDSIZE_TABLE + 7, 0);
/* Tell the sequencer of our initial queue positions */
ahc_outb(ahc, KERNEL_QINPOS, 0);
ahc_outb(ahc, QINPOS, 0);
ahc_outb(ahc, QOUTPOS, 0);
/* Don't have any special messages to send to targets */
ahc_outb(ahc, TARGET_MSG_REQUEST, 0);
ahc_outb(ahc, TARGET_MSG_REQUEST + 1, 0);
/*
* Use the built in queue management registers
* if they are available.
*/
if ((ahc->features & AHC_QUEUE_REGS) != 0) {
ahc_outb(ahc, QOFF_CTLSTA, SCB_QSIZE_256);
ahc_outb(ahc, SDSCB_QOFF, 0);
ahc_outb(ahc, SNSCB_QOFF, 0);
ahc_outb(ahc, HNSCB_QOFF, 0);
}
/* We don't have any waiting selections */
ahc_outb(ahc, WAITING_SCBH, SCB_LIST_NULL);
/* Our disconnection list is empty too */
ahc_outb(ahc, DISCONNECTED_SCBH, SCB_LIST_NULL);
/* Message out buffer starts empty */
ahc_outb(ahc, MSG_OUT, MSG_NOOP);
/*
* Setup the allowed SCSI Sequences based on operational mode.
* If we are a target, we'll enalbe select in operations once
* we've had a lun enabled.
*/
scsiseq_template = ENSELO|ENAUTOATNO|ENAUTOATNP;
if ((ahc->flags & AHC_INITIATORMODE) != 0)
scsiseq_template |= ENRSELI;
ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq_template);
/*
* Load the Sequencer program and Enable the adapter
* in "fast" mode.
*/
if (bootverbose)
printf("%s: Downloading Sequencer Program...",
ahc_name(ahc));
ahc_loadseq(ahc);
/* We have to wait until after any system dumps... */
EVENTHANDLER_REGISTER(shutdown_final, ahc_shutdown,
ahc, SHUTDOWN_PRI_DEFAULT);
if ((ahc->features & AHC_ULTRA2) != 0) {
int wait;
/*
* Wait for up to 500ms for our transceivers
* to settle. If the adapter does not have
* a cable attached, the tranceivers may
* never settle, so don't complain if we
* fail here.
*/
pause_sequencer(ahc);
for (wait = 5000;
(ahc_inb(ahc, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait;
wait--)
DELAY(100);
unpause_sequencer(ahc);
}
return (0);
}
static cam_status
ahc_find_tmode_devs(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb,
struct tmode_tstate **tstate, struct tmode_lstate **lstate,
int notfound_failure)
{
u_int our_id;
/*
* If we are not configured for target mode, someone
* is really confused to be sending this to us.
*/
if ((ahc->flags & AHC_TARGETMODE) == 0)
return (CAM_REQ_INVALID);
/* Range check target and lun */
/*
* Handle the 'black hole' device that sucks up
* requests to unattached luns on enabled targets.
*/
if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD
&& ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
*tstate = NULL;
*lstate = ahc->black_hole;
} else {
u_int max_id;
if (cam_sim_bus(sim) == 0)
our_id = ahc->our_id;
else
our_id = ahc->our_id_b;
max_id = (ahc->features & AHC_WIDE) ? 15 : 7;
if (ccb->ccb_h.target_id > max_id)
return (CAM_TID_INVALID);
if (ccb->ccb_h.target_lun > 7)
return (CAM_LUN_INVALID);
if (ccb->ccb_h.target_id != our_id) {
if ((ahc->features & AHC_MULTI_TID) != 0) {
/*
* Only allow additional targets if
* the initiator role is disabled.
* The hardware cannot handle a re-select-in
* on the initiator id during a re-select-out
* on a different target id.
*/
if ((ahc->flags & AHC_INITIATORMODE) != 0)
return (CAM_TID_INVALID);
} else {
/*
* Only allow our target id to change
* if the initiator role is not configured
* and there are no enabled luns which
* are attached to the currently registered
* scsi id.
*/
if ((ahc->flags & AHC_INITIATORMODE) != 0
|| ahc->enabled_luns > 0)
return (CAM_TID_INVALID);
}
}
*tstate = ahc->enabled_targets[ccb->ccb_h.target_id];
*lstate = NULL;
if (*tstate != NULL)
*lstate =
(*tstate)->enabled_luns[ccb->ccb_h.target_lun];
}
if (notfound_failure != 0 && *lstate == NULL)
return (CAM_PATH_INVALID);
return (CAM_REQ_CMP);
}
static void
ahc_action(struct cam_sim *sim, union ccb *ccb)
{
struct ahc_softc *ahc;
struct tmode_lstate *lstate;
u_int target_id;
u_int our_id;
int s;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahc_action\n"));
ahc = (struct ahc_softc *)cam_sim_softc(sim);
target_id = ccb->ccb_h.target_id;
our_id = SIM_SCSI_ID(ahc, sim);
switch (ccb->ccb_h.func_code) {
/* Common cases first */
case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
case XPT_CONT_TARGET_IO:/* Continue Host Target I/O Connection*/
{
struct tmode_tstate *tstate;
cam_status status;
status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate,
&lstate, TRUE);
if (status != CAM_REQ_CMP) {
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
/* Response from the black hole device */
tstate = NULL;
lstate = ahc->black_hole;
} else {
ccb->ccb_h.status = status;
xpt_done(ccb);
break;
}
}
if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
int s;
s = splcam();
SLIST_INSERT_HEAD(&lstate->accept_tios, &ccb->ccb_h,
sim_links.sle);
ccb->ccb_h.status = CAM_REQ_INPROG;
if ((ahc->flags & AHC_TQINFIFO_BLOCKED) != 0)
ahc_run_tqinfifo(ahc, /*paused*/FALSE);
splx(s);
break;
}
/*
* The target_id represents the target we attempt to
* select. In target mode, this is the initiator of
* the original command.
*/
our_id = target_id;
target_id = ccb->csio.init_id;
/* FALLTHROUGH */
}
case XPT_SCSI_IO: /* Execute the requested I/O operation */
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
{
struct scb *scb;
struct hardware_scb *hscb;
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
uint16_t mask;
/*
* get an scb to use.
*/
if ((scb = ahcgetscb(ahc)) == NULL) {
int s;
s = splcam();
ahc->flags |= AHC_RESOURCE_SHORTAGE;
splx(s);
xpt_freeze_simq(ahc->sim, /*count*/1);
ahcsetccbstatus(ccb, CAM_REQUEUE_REQ);
xpt_done(ccb);
return;
}
hscb = scb->hscb;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_SUBTRACE,
("start scb(%p)\n", scb));
scb->ccb = ccb;
/*
* So we can find the SCB when an abort is requested
*/
ccb->ccb_h.ccb_scb_ptr = scb;
ccb->ccb_h.ccb_ahc_ptr = ahc;
/*
* Put all the arguments for the xfer in the scb
*/
hscb->control = 0;
hscb->scsiid = BUILD_SCSIID(ahc, sim, target_id, our_id);
hscb->lun = ccb->ccb_h.target_lun;
mask = SCB_GET_TARGET_MASK(ahc, scb);
tinfo = ahc_fetch_transinfo(ahc, SIM_CHANNEL(ahc, sim), our_id,
target_id, &tstate);
hscb->scsirate = tinfo->scsirate;
hscb->scsioffset = tinfo->current.offset;
if ((tstate->ultraenb & mask) != 0)
hscb->control |= ULTRAENB;
if ((tstate->discenable & mask) != 0
&& (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) == 0)
hscb->control |= DISCENB;
if ((ccb->ccb_h.flags & CAM_NEGOTIATE) != 0
&& (tinfo->current.width != 0 || tinfo->current.period != 0)) {
scb->flags |= SCB_NEGOTIATE;
hscb->control |= MK_MESSAGE;
}
if (ccb->ccb_h.func_code == XPT_RESET_DEV) {
hscb->cdb_len = 0;
scb->flags |= SCB_DEVICE_RESET;
hscb->control |= MK_MESSAGE;
ahc_execute_scb(scb, NULL, 0, 0);
} else {
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
struct target_data *tdata;
tdata = &hscb->shared_data.tdata;
if (ahc->pending_device == lstate) {
scb->flags |= SCB_TARGET_IMMEDIATE;
ahc->pending_device = NULL;
}
hscb->control |= TARGET_SCB;
tdata->target_phases = IDENTIFY_SEEN;
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
tdata->target_phases |= SPHASE_PENDING;
tdata->scsi_status =
ccb->csio.scsi_status;
}
tdata->initiator_tag = ccb->csio.tag_id;
}
if (ccb->ccb_h.flags & CAM_TAG_ACTION_VALID)
hscb->control |= ccb->csio.tag_action;
ahc_setup_data(ahc, &ccb->csio, scb);
}
break;
}
case XPT_NOTIFY_ACK:
case XPT_IMMED_NOTIFY:
{
struct tmode_tstate *tstate;
struct tmode_lstate *lstate;
cam_status status;
status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate,
&lstate, TRUE);
if (status != CAM_REQ_CMP) {
ccb->ccb_h.status = status;
xpt_done(ccb);
break;
}
SLIST_INSERT_HEAD(&lstate->immed_notifies, &ccb->ccb_h,
sim_links.sle);
ccb->ccb_h.status = CAM_REQ_INPROG;
ahc_send_lstate_events(ahc, lstate);
break;
}
case XPT_EN_LUN: /* Enable LUN as a target */
ahc_handle_en_lun(ahc, sim, ccb);
xpt_done(ccb);
break;
case XPT_ABORT: /* Abort the specified CCB */
{
ahc_abort_ccb(ahc, sim, ccb);
break;
}
case XPT_SET_TRAN_SETTINGS:
{
struct ahc_devinfo devinfo;
struct ccb_trans_settings *cts;
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
uint16_t *discenable;
uint16_t *tagenable;
u_int update_type;
int s;
cts = &ccb->cts;
ahc_compile_devinfo(&devinfo, SIM_SCSI_ID(ahc, sim),
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
SIM_CHANNEL(ahc, sim),
ROLE_UNKNOWN);
tinfo = ahc_fetch_transinfo(ahc, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
update_type = 0;
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) {
update_type |= AHC_TRANS_GOAL;
discenable = &tstate->discenable;
tagenable = &tstate->tagenable;
} else if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) {
update_type |= AHC_TRANS_USER;
discenable = &ahc->user_discenable;
tagenable = &ahc->user_tagenable;
} else {
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
s = splcam();
if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0)
*discenable |= devinfo.target_mask;
else
*discenable &= ~devinfo.target_mask;
}
if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0)
*tagenable |= devinfo.target_mask;
else
*tagenable &= ~devinfo.target_mask;
}
if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0) {
ahc_validate_width(ahc, &cts->bus_width);
ahc_set_width(ahc, &devinfo, cts->ccb_h.path,
cts->bus_width, update_type,
/*paused*/FALSE);
}
if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) == 0) {
if (update_type == AHC_TRANS_USER)
cts->sync_offset = tinfo->user.offset;
else
cts->sync_offset = tinfo->goal.offset;
}
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) == 0) {
if (update_type == AHC_TRANS_USER)
cts->sync_period = tinfo->user.period;
else
cts->sync_period = tinfo->goal.period;
}
if (((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0)
|| ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0)) {
struct ahc_syncrate *syncrate;
u_int ppr_options;
u_int maxsync;
if ((ahc->features & AHC_ULTRA2) != 0)
maxsync = AHC_SYNCRATE_DT;
else if ((ahc->features & AHC_ULTRA) != 0)
maxsync = AHC_SYNCRATE_ULTRA;
else
maxsync = AHC_SYNCRATE_FAST;
ppr_options = 0;
if (cts->sync_period <= 9)
ppr_options = MSG_EXT_PPR_DT_REQ;
syncrate = ahc_find_syncrate(ahc, &cts->sync_period,
&ppr_options,
maxsync);
ahc_validate_offset(ahc, syncrate, &cts->sync_offset,
MSG_EXT_WDTR_BUS_8_BIT);
/* We use a period of 0 to represent async */
if (cts->sync_offset == 0) {
cts->sync_period = 0;
ppr_options = 0;
}
if (ppr_options == MSG_EXT_PPR_DT_REQ
&& tinfo->user.transport_version >= 3) {
tinfo->goal.transport_version =
tinfo->user.transport_version;
tinfo->current.transport_version =
tinfo->user.transport_version;
}
ahc_set_syncrate(ahc, &devinfo, cts->ccb_h.path,
syncrate, cts->sync_period,
cts->sync_offset, ppr_options,
update_type, /*paused*/FALSE);
}
splx(s);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_GET_TRAN_SETTINGS:
/* Get default/user set transfer settings for the target */
{
struct ahc_devinfo devinfo;
struct ccb_trans_settings *cts;
struct ahc_initiator_tinfo *targ_info;
struct tmode_tstate *tstate;
struct ahc_transinfo *tinfo;
int s;
cts = &ccb->cts;
ahc_compile_devinfo(&devinfo, SIM_SCSI_ID(ahc, sim),
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
SIM_CHANNEL(ahc, sim),
ROLE_UNKNOWN);
targ_info = ahc_fetch_transinfo(ahc, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0)
tinfo = &targ_info->current;
else
tinfo = &targ_info->user;
s = splcam();
cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) {
if ((ahc->user_discenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_DISC_ENB;
if ((ahc->user_tagenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_TAG_ENB;
} else {
if ((tstate->discenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_DISC_ENB;
if ((tstate->tagenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_TAG_ENB;
}
cts->sync_period = tinfo->period;
cts->sync_offset = tinfo->offset;
cts->bus_width = tinfo->width;
splx(s);
cts->valid = CCB_TRANS_SYNC_RATE_VALID
| CCB_TRANS_SYNC_OFFSET_VALID
| CCB_TRANS_BUS_WIDTH_VALID
| CCB_TRANS_DISC_VALID
| CCB_TRANS_TQ_VALID;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
uint32_t size_mb;
uint32_t secs_per_cylinder;
int extended;
ccg = &ccb->ccg;
size_mb = ccg->volume_size
/ ((1024L * 1024L) / ccg->block_size);
extended = SIM_IS_SCSIBUS_B(ahc, sim)
? ahc->flags & AHC_EXTENDED_TRANS_B
: ahc->flags & AHC_EXTENDED_TRANS_A;
if (size_mb > 1024 && extended) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
{
int found;
s = splcam();
found = ahc_reset_channel(ahc, SIM_CHANNEL(ahc, sim),
/*initiate reset*/TRUE);
splx(s);
if (bootverbose) {
xpt_print_path(SIM_PATH(ahc, sim));
printf("SCSI bus reset delivered. "
"%d SCBs aborted.\n", found);
}
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_TERM_IO: /* Terminate the I/O process */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
if ((ahc->features & AHC_WIDE) != 0)
cpi->hba_inquiry |= PI_WIDE_16;
if ((ahc->flags & AHC_TARGETMODE) != 0) {
cpi->target_sprt = PIT_PROCESSOR
| PIT_DISCONNECT
| PIT_TERM_IO;
} else {
cpi->target_sprt = 0;
}
cpi->hba_misc = (ahc->flags & AHC_INITIATORMODE)
? 0 : PIM_NOINITIATOR;
cpi->hba_eng_cnt = 0;
cpi->max_target = (ahc->features & AHC_WIDE) ? 15 : 7;
cpi->max_lun = 64;
if (SIM_IS_SCSIBUS_B(ahc, sim)) {
cpi->initiator_id = ahc->our_id_b;
if ((ahc->flags & AHC_RESET_BUS_B) == 0)
cpi->hba_misc |= PIM_NOBUSRESET;
} else {
cpi->initiator_id = ahc->our_id;
if ((ahc->flags & AHC_RESET_BUS_A) == 0)
cpi->hba_misc |= PIM_NOBUSRESET;
}
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
static void
ahc_async(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
{
struct ahc_softc *ahc;
struct cam_sim *sim;
sim = (struct cam_sim *)callback_arg;
ahc = (struct ahc_softc *)cam_sim_softc(sim);
switch (code) {
case AC_LOST_DEVICE:
{
struct ahc_devinfo devinfo;
int s;
ahc_compile_devinfo(&devinfo, SIM_SCSI_ID(ahc, sim),
xpt_path_target_id(path),
xpt_path_lun_id(path),
SIM_CHANNEL(ahc, sim),
ROLE_UNKNOWN);
/*
* Revert to async/narrow transfers
* for the next device.
*/
s = splcam();
ahc_set_width(ahc, &devinfo, path, MSG_EXT_WDTR_BUS_8_BIT,
AHC_TRANS_GOAL|AHC_TRANS_CUR,
/*paused*/FALSE);
ahc_set_syncrate(ahc, &devinfo, path, /*syncrate*/NULL,
/*period*/0, /*offset*/0, /*ppr_options*/0,
AHC_TRANS_GOAL|AHC_TRANS_CUR,
/*paused*/FALSE);
splx(s);
break;
}
default:
break;
}
}
static void
ahc_execute_scb(void *arg, bus_dma_segment_t *dm_segs, int nsegments,
int error)
{
struct scb *scb;
union ccb *ccb;
struct ahc_softc *ahc;
int s;
scb = (struct scb *)arg;
ccb = scb->ccb;
ahc = (struct ahc_softc *)ccb->ccb_h.ccb_ahc_ptr;
if (error != 0) {
if (error == EFBIG)
ahcsetccbstatus(scb->ccb, CAM_REQ_TOO_BIG);
else
ahcsetccbstatus(scb->ccb, CAM_REQ_CMP_ERR);
if (nsegments != 0)
bus_dmamap_unload(ahc->buffer_dmat, scb->dmamap);
ahcfreescb(ahc, scb);
xpt_done(ccb);
return;
}
if (nsegments != 0) {
struct ahc_dma_seg *sg;
bus_dma_segment_t *end_seg;
bus_dmasync_op_t op;
end_seg = dm_segs + nsegments;
/* Copy the segments into our SG list */
sg = scb->sg_list;
while (dm_segs < end_seg) {
sg->addr = dm_segs->ds_addr;
/* XXX Add in the 5th byte of the address later. */
sg->len = dm_segs->ds_len;
sg++;
dm_segs++;
}
/*
* Note where to find the SG entries in bus space.
* We also set the full residual flag which the
* sequencer will clear as soon as a data transfer
* occurs.
*/
scb->hscb->sgptr = scb->sg_list_phys | SG_FULL_RESID;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_PREREAD;
else
op = BUS_DMASYNC_PREWRITE;
bus_dmamap_sync(ahc->buffer_dmat, scb->dmamap, op);
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
struct target_data *tdata;
tdata = &scb->hscb->shared_data.tdata;
tdata->target_phases |= DPHASE_PENDING;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
tdata->data_phase = P_DATAOUT;
else
tdata->data_phase = P_DATAIN;
/*
* If the transfer is of an odd length and in the
* "in" direction (scsi->HostBus), then it may
* trigger a bug in the 'WideODD' feature of
* non-Ultra2 chips. Force the total data-length
* to be even by adding an extra, 1 byte, SG,
* element. We do this even if we are not currently
* negotiated wide as negotiation could occur before
* this command is executed.
*/
if ((ahc->bugs & AHC_TMODE_WIDEODD_BUG) != 0
&& (ccb->csio.dxfer_len & 0x1) != 0
&& (ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
nsegments++;
if (nsegments > AHC_NSEG) {
ahcsetccbstatus(scb->ccb,
CAM_REQ_TOO_BIG);
bus_dmamap_unload(ahc->buffer_dmat,
scb->dmamap);
ahcfreescb(ahc, scb);
xpt_done(ccb);
return;
}
sg->addr = ahc->dma_bug_buf;
sg->len = 1;
sg++;
}
}
sg--;
sg->len |= AHC_DMA_LAST_SEG;
/* Copy the first SG into the "current" data pointer area */
scb->hscb->dataptr = scb->sg_list->addr;
scb->hscb->datacnt = scb->sg_list->len;
} else {
scb->hscb->sgptr = SG_LIST_NULL;
scb->hscb->dataptr = 0;
scb->hscb->datacnt = 0;
}
scb->sg_count = nsegments;
s = splcam();
/*
* Last time we need to check if this SCB needs to
* be aborted.
*/
if (ahc_ccb_status(ccb) != CAM_REQ_INPROG) {
if (nsegments != 0)
bus_dmamap_unload(ahc->buffer_dmat, scb->dmamap);
ahcfreescb(ahc, scb);
xpt_done(ccb);
splx(s);
return;
}
LIST_INSERT_HEAD(&ahc->pending_ccbs, &ccb->ccb_h,
sim_links.le);
ccb->ccb_h.status |= CAM_SIM_QUEUED;
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT)
ccb->ccb_h.timeout = 5 * 1000;
ccb->ccb_h.timeout_ch =
timeout(ahc_timeout, (caddr_t)scb,
(ccb->ccb_h.timeout * hz) / 1000);
}
/*
* We only allow one untagged transaction
* per target in the initiator role unless
* we are storing a full busy target *lun*
* table in SCB space.
*/
if ((scb->hscb->control & (TARGET_SCB|TAG_ENB)) == 0
&& (ahc->features & AHC_SCB_BTT) == 0) {
struct scb_tailq *untagged_q;
untagged_q = &(ahc->untagged_queues[ccb->ccb_h.target_id]);
TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe);
if (TAILQ_FIRST(untagged_q) != scb) {
splx(s);
return;
}
}
scb->flags |= SCB_ACTIVE;
if ((scb->flags & SCB_TARGET_IMMEDIATE) != 0) {
#if 0
printf("Continueing Immediate Command %d:%d\n",
ccb->ccb_h.target_id, ccb->ccb_h.target_lun);
#endif
pause_sequencer(ahc);
if ((ahc->flags & AHC_PAGESCBS) == 0)
ahc_outb(ahc, SCBPTR, scb->hscb->tag);
ahc_outb(ahc, SCB_TAG, scb->hscb->tag);
ahc_outb(ahc, RETURN_1, CONT_MSG_LOOP);
unpause_sequencer(ahc);
} else {
ahc_queue_scb(ahc, scb);
}
splx(s);
}
static void
ahc_poll(struct cam_sim *sim)
{
ahc_intr(cam_sim_softc(sim));
}
static void
ahc_setup_data(struct ahc_softc *ahc, struct ccb_scsiio *csio,
struct scb *scb)
{
struct hardware_scb *hscb;
struct ccb_hdr *ccb_h;
hscb = scb->hscb;
ccb_h = &csio->ccb_h;
if (ccb_h->func_code == XPT_SCSI_IO) {
hscb->cdb_len = csio->cdb_len;
if ((ccb_h->flags & CAM_CDB_POINTER) != 0) {
if (hscb->cdb_len > sizeof(hscb->cdb32)
|| (ccb_h->flags & CAM_CDB_PHYS) != 0) {
ahcsetccbstatus(scb->ccb, CAM_REQ_INVALID);
xpt_done(scb->ccb);
ahcfreescb(ahc, scb);
return;
}
if (hscb->cdb_len > 12) {
memcpy(hscb->cdb32,
csio->cdb_io.cdb_ptr,
hscb->cdb_len);
if ((ahc->flags & AHC_CMD_CHAN) == 0) {
hscb->shared_data.cdb_ptr =
scb->cdb32_busaddr;
}
} else {
memcpy(hscb->shared_data.cdb,
csio->cdb_io.cdb_ptr,
hscb->cdb_len);
}
} else {
if (hscb->cdb_len > 12) {
memcpy(hscb->cdb32, csio->cdb_io.cdb_bytes,
hscb->cdb_len);
if ((ahc->flags & AHC_CMD_CHAN) == 0) {
hscb->shared_data.cdb_ptr =
scb->cdb32_busaddr;
}
} else {
memcpy(hscb->shared_data.cdb,
csio->cdb_io.cdb_bytes,
hscb->cdb_len);
}
}
}
/* Only use S/G if there is a transfer */
if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if ((ccb_h->flags & CAM_SCATTER_VALID) == 0) {
/* We've been given a pointer to a single buffer */
if ((ccb_h->flags & CAM_DATA_PHYS) == 0) {
int s;
int error;
s = splsoftvm();
error = bus_dmamap_load(ahc->buffer_dmat,
scb->dmamap,
csio->data_ptr,
csio->dxfer_len,
ahc_execute_scb,
scb, /*flags*/0);
if (error == EINPROGRESS) {
/*
* So as to maintain ordering,
* freeze the controller queue
* until our mapping is
* returned.
*/
xpt_freeze_simq(ahc->sim,
/*count*/1);
scb->ccb->ccb_h.status |=
CAM_RELEASE_SIMQ;
}
splx(s);
} else {
struct bus_dma_segment seg;
/* Pointer to physical buffer */
if (csio->dxfer_len > AHC_MAXTRANSFER_SIZE)
panic("ahc_setup_data - Transfer size "
"larger than can device max");
seg.ds_addr = (intptr_t)csio->data_ptr;
seg.ds_len = csio->dxfer_len;
ahc_execute_scb(scb, &seg, 1, 0);
}
} else {
struct bus_dma_segment *segs;
if ((ccb_h->flags & CAM_DATA_PHYS) != 0)
panic("ahc_setup_data - Physical segment "
"pointers unsupported");
if ((ccb_h->flags & CAM_SG_LIST_PHYS) == 0)
panic("ahc_setup_data - Virtual segment "
"addresses unsupported");
/* Just use the segments provided */
segs = (struct bus_dma_segment *)csio->data_ptr;
ahc_execute_scb(scb, segs, csio->sglist_cnt, 0);
}
} else {
ahc_execute_scb(scb, NULL, 0, 0);
}
}
static void
ahc_freeze_devq(struct ahc_softc *ahc, struct cam_path *path)
{
int target;
char channel;
int lun;
target = xpt_path_target_id(path);
lun = xpt_path_lun_id(path);
channel = xpt_path_sim(path)->bus_id == 0 ? 'A' : 'B';
ahc_search_qinfifo(ahc, target, channel, lun,
/*tag*/SCB_LIST_NULL, ROLE_UNKNOWN,
CAM_REQUEUE_REQ, SEARCH_COMPLETE);
}
static void
ahcallocscbs(struct ahc_softc *ahc)
{
struct scb_data *scb_data;
struct scb *next_scb;
struct sg_map_node *sg_map;
bus_addr_t physaddr;
struct ahc_dma_seg *segs;
int newcount;
int i;
scb_data = ahc->scb_data;
if (scb_data->numscbs >= AHC_SCB_MAX)
/* Can't allocate any more */
return;
next_scb = &scb_data->scbarray[scb_data->numscbs];
sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT);
if (sg_map == NULL)
return;
/* Allocate S/G space for the next batch of SCBS */
if (bus_dmamem_alloc(scb_data->sg_dmat, (void **)&sg_map->sg_vaddr,
BUS_DMA_NOWAIT, &sg_map->sg_dmamap) != 0) {
free(sg_map, M_DEVBUF);
return;
}
SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links);
bus_dmamap_load(scb_data->sg_dmat, sg_map->sg_dmamap, sg_map->sg_vaddr,
PAGE_SIZE, ahcdmamapcb, &sg_map->sg_physaddr,
/*flags*/0);
segs = sg_map->sg_vaddr;
physaddr = sg_map->sg_physaddr;
newcount = (PAGE_SIZE / (AHC_NSEG * sizeof(struct ahc_dma_seg)));
for (i = 0; scb_data->numscbs < AHC_SCB_MAX && i < newcount; i++) {
int error;
next_scb->sg_list = segs;
/*
* The sequencer always starts with the second entry.
* The first entry is embedded in the scb.
*/
next_scb->sg_list_phys = physaddr + sizeof(struct ahc_dma_seg);
next_scb->flags = SCB_FREE;
error = bus_dmamap_create(ahc->buffer_dmat, /*flags*/0,
&next_scb->dmamap);
if (error != 0)
break;
next_scb->hscb = &scb_data->hscbs[scb_data->numscbs];
next_scb->hscb->tag = ahc->scb_data->numscbs;
next_scb->cdb32_busaddr =
ahc_hscb_busaddr(ahc, next_scb->hscb->tag)
+ offsetof(struct hardware_scb, cdb32);
SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs,
next_scb, links.sle);
segs += AHC_NSEG;
physaddr += (AHC_NSEG * sizeof(struct ahc_dma_seg));
next_scb++;
ahc->scb_data->numscbs++;
}
}
#ifdef AHC_DUMP_SEQ
static void
ahc_dumpseq(struct ahc_softc* ahc)
{
int i;
int max_prog;
if ((ahc->chip & AHC_BUS_MASK) < AHC_PCI)
max_prog = 448;
else if ((ahc->features & AHC_ULTRA2) != 0)
max_prog = 768;
else
max_prog = 512;
ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
ahc_outb(ahc, SEQADDR0, 0);
ahc_outb(ahc, SEQADDR1, 0);
for (i = 0; i < max_prog; i++) {
uint8_t ins_bytes[4];
ahc_insb(ahc, SEQRAM, ins_bytes, 4);
printf("0x%08x\n", ins_bytes[0] << 24
| ins_bytes[1] << 16
| ins_bytes[2] << 8
| ins_bytes[3]);
}
}
#endif
static void
ahc_loadseq(struct ahc_softc *ahc)
{
struct patch *cur_patch;
u_int i;
int downloaded;
u_int skip_addr;
uint8_t download_consts[2];
/* Setup downloadable constant table */
download_consts[QOUTFIFO_OFFSET] = 0;
if (ahc->targetcmds != NULL)
download_consts[QOUTFIFO_OFFSET] += 32;
download_consts[QINFIFO_OFFSET] = download_consts[QOUTFIFO_OFFSET] + 1;
cur_patch = patches;
downloaded = 0;
skip_addr = 0;
ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
ahc_outb(ahc, SEQADDR0, 0);
ahc_outb(ahc, SEQADDR1, 0);
for (i = 0; i < sizeof(seqprog)/4; i++) {
if (ahc_check_patch(ahc, &cur_patch, i, &skip_addr) == 0) {
/*
* Don't download this instruction as it
* is in a patch that was removed.
*/
continue;
}
ahc_download_instr(ahc, i, download_consts);
downloaded++;
}
ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE);
restart_sequencer(ahc);
if (bootverbose)
printf(" %d instructions downloaded\n", downloaded);
}
static int
ahc_check_patch(struct ahc_softc *ahc, struct patch **start_patch,
u_int start_instr, u_int *skip_addr)
{
struct patch *cur_patch;
struct patch *last_patch;
u_int num_patches;
num_patches = sizeof(patches)/sizeof(struct patch);
last_patch = &patches[num_patches];
cur_patch = *start_patch;
while (cur_patch < last_patch && start_instr == cur_patch->begin) {
if (cur_patch->patch_func(ahc) == 0) {
/* Start rejecting code */
*skip_addr = start_instr + cur_patch->skip_instr;
cur_patch += cur_patch->skip_patch;
} else {
/* Accepted this patch. Advance to the next
* one and wait for our intruction pointer to
* hit this point.
*/
cur_patch++;
}
}
*start_patch = cur_patch;
if (start_instr < *skip_addr)
/* Still skipping */
return (0);
return (1);
}
static void
ahc_download_instr(struct ahc_softc *ahc, u_int instrptr, uint8_t *dconsts)
{
union ins_formats instr;
struct ins_format1 *fmt1_ins;
struct ins_format3 *fmt3_ins;
u_int opcode;
/* Structure copy */
instr = *(union ins_formats*)&seqprog[instrptr * 4];
#if BYTE_ORDER == BIG_ENDIAN
opcode = instr.format.bytes[0];
instr.format.bytes[0] = instr.format.bytes[3];
instr.format.bytes[3] = opcode;
opcode = instr.format.bytes[1];
instr.format.bytes[1] = instr.format.bytes[2];
instr.format.bytes[2] = opcode;
#endif
fmt1_ins = &instr.format1;
fmt3_ins = NULL;
/* Pull the opcode */
opcode = instr.format1.opcode;
switch (opcode) {
case AIC_OP_JMP:
case AIC_OP_JC:
case AIC_OP_JNC:
case AIC_OP_CALL:
case AIC_OP_JNE:
case AIC_OP_JNZ:
case AIC_OP_JE:
case AIC_OP_JZ:
{
struct patch *cur_patch;
int address_offset;
u_int address;
u_int skip_addr;
u_int i;
fmt3_ins = &instr.format3;
address_offset = 0;
address = fmt3_ins->address;
cur_patch = patches;
skip_addr = 0;
for (i = 0; i < address;) {
ahc_check_patch(ahc, &cur_patch, i, &skip_addr);
if (skip_addr > i) {
int end_addr;
end_addr = MIN(address, skip_addr);
address_offset += end_addr - i;
i = skip_addr;
} else {
i++;
}
}
address -= address_offset;
fmt3_ins->address = address;
/* FALLTHROUGH */
}
case AIC_OP_OR:
case AIC_OP_AND:
case AIC_OP_XOR:
case AIC_OP_ADD:
case AIC_OP_ADC:
case AIC_OP_BMOV:
if (fmt1_ins->parity != 0) {
fmt1_ins->immediate = dconsts[fmt1_ins->immediate];
}
fmt1_ins->parity = 0;
/* FALLTHROUGH */
case AIC_OP_ROL:
if ((ahc->features & AHC_ULTRA2) != 0) {
int i, count;
/* Calculate odd parity for the instruction */
for (i = 0, count = 0; i < 31; i++) {
uint32_t mask;
mask = 0x01 << i;
if ((instr.integer & mask) != 0)
count++;
}
if ((count & 0x01) == 0)
instr.format1.parity = 1;
} else {
/* Compress the instruction for older sequencers */
if (fmt3_ins != NULL) {
instr.integer =
fmt3_ins->immediate
| (fmt3_ins->source << 8)
| (fmt3_ins->address << 16)
| (fmt3_ins->opcode << 25);
} else {
instr.integer =
fmt1_ins->immediate
| (fmt1_ins->source << 8)
| (fmt1_ins->destination << 16)
| (fmt1_ins->ret << 24)
| (fmt1_ins->opcode << 25);
}
}
#if BYTE_ORDER == BIG_ENDIAN
opcode = instr.format.bytes[0];
instr.format.bytes[0] = instr.format.bytes[3];
instr.format.bytes[3] = opcode;
opcode = instr.format.bytes[1];
instr.format.bytes[1] = instr.format.bytes[2];
instr.format.bytes[2] = opcode;
#endif
ahc_outsb(ahc, SEQRAM, instr.bytes, 4);
break;
default:
panic("Unknown opcode encountered in seq program");
break;
}
}
static void
ahc_set_recoveryscb(struct ahc_softc *ahc, struct scb *scb) {
if ((scb->flags & SCB_RECOVERY_SCB) == 0) {
struct ccb_hdr *ccbh;
scb->flags |= SCB_RECOVERY_SCB;
/*
* Take all queued, but not sent SCBs out of the equation.
* Also ensure that no new CCBs are queued to us while we
* try to fix this problem.
*/
if ((scb->ccb->ccb_h.status & CAM_RELEASE_SIMQ) == 0) {
xpt_freeze_simq(ahc->sim, /*count*/1);
scb->ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
}
/*
* Go through all of our pending SCBs and remove
* any scheduled timeouts for them. We will reschedule
* them after we've successfully fixed this problem.
*/
ccbh = ahc->pending_ccbs.lh_first;
while (ccbh != NULL) {
struct scb *pending_scb;
pending_scb = (struct scb *)ccbh->ccb_scb_ptr;
untimeout(ahc_timeout, pending_scb, ccbh->timeout_ch);
ccbh = ccbh->sim_links.le.le_next;
}
}
}
static void
ahc_timeout(void *arg)
{
struct scb *scb;
struct ahc_softc *ahc;
int s, found;
u_int last_phase;
int target;
int lun;
int i;
char channel;
scb = (struct scb *)arg;
ahc = (struct ahc_softc *)scb->ccb->ccb_h.ccb_ahc_ptr;
s = splcam();
/*
* Ensure that the card doesn't do anything
* behind our back. Also make sure that we
* didn't "just" miss an interrupt that would
* affect this timeout.
*/
do {
ahc_intr(ahc);
pause_sequencer(ahc);
} while (ahc_inb(ahc, INTSTAT) & INT_PEND);
xpt_print_path(scb->ccb->ccb_h.path);
if ((scb->flags & SCB_ACTIVE) == 0) {
/* Previous timeout took care of me already */
printf("Timedout SCB %d handled by another timeout\n",
scb->hscb->tag);
unpause_sequencer(ahc);
splx(s);
return;
}
target = SCB_GET_TARGET(ahc, scb);
channel = SCB_GET_CHANNEL(ahc, scb);
lun = SCB_GET_LUN(scb);
printf("SCB 0x%x - timed out ", scb->hscb->tag);
/*
* Take a snapshot of the bus state and print out
* some information so we can track down driver bugs.
*/
last_phase = ahc_inb(ahc, LASTPHASE);
for (i = 0; i < num_phases; i++) {
if (last_phase == phase_table[i].phase)
break;
}
printf("%s", phase_table[i].phasemsg);
printf(", SEQADDR == 0x%x\n",
ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8));
#if 0
printf("SSTAT1 == 0x%x\n", ahc_inb(ahc, SSTAT1));
printf("SSTAT3 == 0x%x\n", ahc_inb(ahc, SSTAT3));
printf("SCSIPHASE == 0x%x\n", ahc_inb(ahc, SCSIPHASE));
printf("SCSIRATE == 0x%x\n", ahc_inb(ahc, SCSIRATE));
printf("SCSIOFFSET == 0x%x\n", ahc_inb(ahc, SCSIOFFSET));
printf("SEQ_FLAGS == 0x%x\n", ahc_inb(ahc, SEQ_FLAGS));
printf("SCB_DATAPTR == 0x%x\n", ahc_inb(ahc, SCB_DATAPTR)
| ahc_inb(ahc, SCB_DATAPTR + 1) << 8
| ahc_inb(ahc, SCB_DATAPTR + 2) << 16
| ahc_inb(ahc, SCB_DATAPTR + 3) << 24);
printf("SCB_DATACNT == 0x%x\n", ahc_inb(ahc, SCB_DATACNT)
| ahc_inb(ahc, SCB_DATACNT + 1) << 8
| ahc_inb(ahc, SCB_DATACNT + 2) << 16);
printf("SCB_SGCOUNT == 0x%x\n", ahc_inb(ahc, SCB_SGCOUNT));
printf("CCSCBCTL == 0x%x\n", ahc_inb(ahc, CCSCBCTL));
printf("CCSCBCNT == 0x%x\n", ahc_inb(ahc, CCSCBCNT));
printf("DFCNTRL == 0x%x\n", ahc_inb(ahc, DFCNTRL));
printf("DFSTATUS == 0x%x\n", ahc_inb(ahc, DFSTATUS));
printf("CCHCNT == 0x%x\n", ahc_inb(ahc, CCHCNT));
if (scb->sg_count > 0) {
for (i = 0; i < scb->sg_count; i++) {
printf("sg[%d] - Addr 0x%x : Length %d\n",
i,
scb->sg_list[i].addr,
scb->sg_list[i].len);
}
}
#endif
if (scb->flags & (SCB_DEVICE_RESET|SCB_ABORT)) {
/*
* Been down this road before.
* Do a full bus reset.
*/
bus_reset:
ahcsetccbstatus(scb->ccb, CAM_CMD_TIMEOUT);
found = ahc_reset_channel(ahc, channel, /*Initiate Reset*/TRUE);
printf("%s: Issued Channel %c Bus Reset. "
"%d SCBs aborted\n", ahc_name(ahc), channel, found);
} else {
/*
* If we are a target, transition to bus free and report
* the timeout.
*
* The target/initiator that is holding up the bus may not
* be the same as the one that triggered this timeout
* (different commands have different timeout lengths).
* If the bus is idle and we are actiing as the initiator
* for this request, queue a BDR message to the timed out
* target. Otherwise, if the timed out transaction is
* active:
* Initiator transaction:
* Stuff the message buffer with a BDR message and assert
* ATN in the hopes that the target will let go of the bus
* and go to the mesgout phase. If this fails, we'll
* get another timeout 2 seconds later which will attempt
* a bus reset.
*
* Target transaction:
* Transition to BUS FREE and report the error.
* It's good to be the target!
*/
u_int active_scb_index;
active_scb_index = ahc_inb(ahc, SCB_TAG);
if (last_phase != P_BUSFREE
&& (active_scb_index < ahc->scb_data->numscbs)) {
struct scb *active_scb;
/*
* If the active SCB is not from our device,
* assume that another device is hogging the bus
* and wait for it's timeout to expire before
* taking additional action.
*/
active_scb = &ahc->scb_data->scbarray[active_scb_index];
if (active_scb->hscb->scsiid != scb->hscb->scsiid
|| active_scb->hscb->lun != scb->hscb->lun) {
struct ccb_hdr *ccbh;
u_int newtimeout;
xpt_print_path(scb->ccb->ccb_h.path);
printf("Other SCB Timeout%s",
(scb->flags & SCB_OTHERTCL_TIMEOUT) != 0
? " again\n" : "\n");
scb->flags |= SCB_OTHERTCL_TIMEOUT;
newtimeout = MAX(active_scb->ccb->ccb_h.timeout,
scb->ccb->ccb_h.timeout);
ccbh = &scb->ccb->ccb_h;
scb->ccb->ccb_h.timeout_ch =
timeout(ahc_timeout, scb,
(newtimeout * hz) / 1000);
splx(s);
return;
}
/* It's us */
if ((scb->hscb->control & TARGET_SCB) != 0) {
/*
* Send back any queued up transactions
* and properly record the error condition.
*/
ahc_freeze_devq(ahc, scb->ccb->ccb_h.path);
ahcsetccbstatus(scb->ccb, CAM_CMD_TIMEOUT);
ahc_freeze_ccb(scb->ccb);
ahc_done(ahc, scb);
/* Will clear us from the bus */
restart_sequencer(ahc);
return;
}
ahc_set_recoveryscb(ahc, active_scb);
ahc_outb(ahc, MSG_OUT, MSG_BUS_DEV_RESET);
ahc_outb(ahc, SCSISIGO, last_phase|ATNO);
xpt_print_path(active_scb->ccb->ccb_h.path);
printf("BDR message in message buffer\n");
active_scb->flags |= SCB_DEVICE_RESET;
active_scb->ccb->ccb_h.timeout_ch =
timeout(ahc_timeout, (caddr_t)active_scb, 2 * hz);
unpause_sequencer(ahc);
} else {
int disconnected;
/* XXX Shouldn't panic. Just punt instead */
if ((scb->hscb->control & TARGET_SCB) != 0)
panic("Timed-out target SCB but bus idle");
if (last_phase != P_BUSFREE
&& (ahc_inb(ahc, SSTAT0) & TARGET) != 0) {
/* XXX What happened to the SCB? */
/* Hung target selection. Goto busfree */
printf("%s: Hung target selection\n",
ahc_name(ahc));
restart_sequencer(ahc);
return;
}
if (ahc_search_qinfifo(ahc, target, channel, lun,
scb->hscb->tag, ROLE_INITIATOR,
/*status*/0, SEARCH_COUNT) > 0) {
disconnected = FALSE;
} else {
disconnected = TRUE;
}
if (disconnected) {
u_int active_scb;
ahc_set_recoveryscb(ahc, scb);
/*
* Simply set the MK_MESSAGE control bit.
*/
scb->hscb->control |= MK_MESSAGE;
scb->flags |= SCB_QUEUED_MSG
| SCB_DEVICE_RESET;
/*
* Mark the cached copy of this SCB in the
* disconnected list too, so that a reconnect
* at this point causes a BDR or abort.
*/
active_scb = ahc_inb(ahc, SCBPTR);
if (ahc_search_disc_list(ahc, target,
channel, lun,
scb->hscb->tag,
/*stop_on_first*/TRUE,
/*remove*/FALSE,
/*save_state*/FALSE)) {
u_int scb_control;
scb_control = ahc_inb(ahc, SCB_CONTROL);
scb_control |= MK_MESSAGE;
ahc_outb(ahc, SCB_CONTROL, scb_control);
}
ahc_outb(ahc, SCBPTR, active_scb);
/*
* Actually re-queue this SCB in case we can
* select the device before it reconnects.
* Clear out any entries in the QINFIFO first
* so we are the next SCB for this target
* to run.
*/
ahc_search_qinfifo(ahc,
SCB_GET_TARGET(ahc, scb),
channel, SCB_GET_LUN(scb),
SCB_LIST_NULL,
ROLE_INITIATOR,
CAM_REQUEUE_REQ,
SEARCH_COMPLETE);
xpt_print_path(scb->ccb->ccb_h.path);
printf("Queuing a BDR SCB\n");
ahc->qinfifo[ahc->qinfifonext++] =
scb->hscb->tag;
if ((ahc->features & AHC_QUEUE_REGS) != 0) {
ahc_outb(ahc, HNSCB_QOFF,
ahc->qinfifonext);
} else {
ahc_outb(ahc, KERNEL_QINPOS,
ahc->qinfifonext);
}
scb->ccb->ccb_h.timeout_ch =
timeout(ahc_timeout, (caddr_t)scb, 2 * hz);
unpause_sequencer(ahc);
} else {
/* Go "immediatly" to the bus reset */
/* This shouldn't happen */
ahc_set_recoveryscb(ahc, scb);
xpt_print_path(scb->ccb->ccb_h.path);
printf("SCB %d: Immediate reset. "
"Flags = 0x%x\n", scb->hscb->tag,
scb->flags);
goto bus_reset;
}
}
}
splx(s);
}
static int
ahc_search_qinfifo(struct ahc_softc *ahc, int target, char channel,
int lun, u_int tag, role_t role, uint32_t status,
ahc_search_action action)
{
struct scb *scbp;
uint8_t qinpos;
uint8_t qintail;
uint8_t next, prev;
uint8_t curscbptr;
int found;
qinpos = ahc_inb(ahc, QINPOS);
qintail = ahc->qinfifonext;
found = 0;
if (action == SEARCH_COMPLETE) {
/*
* Don't attempt to run any queued untagged transactions
* until we are done with the abort process.
*/
ahc_freeze_untagged_queues(ahc);
}
/*
* Start with an empty queue. Entries that are not chosen
* for removal will be re-added to the queue as we go.
*/
ahc->qinfifonext = qinpos;
while (qinpos != qintail) {
scbp = &ahc->scb_data->scbarray[ahc->qinfifo[qinpos]];
if (ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)) {
/*
* We found an scb that needs to be acted on.
*/
found++;
switch (action) {
case SEARCH_COMPLETE:
if (ahc_ccb_status(scbp->ccb) == CAM_REQ_INPROG)
ahcsetccbstatus(scbp->ccb, status);
ahc_freeze_ccb(scbp->ccb);
ahc_done(ahc, scbp);
break;
case SEARCH_COUNT:
ahc->qinfifo[ahc->qinfifonext++] =
scbp->hscb->tag;
break;
case SEARCH_REMOVE:
break;
}
} else {
ahc->qinfifo[ahc->qinfifonext++] = scbp->hscb->tag;
}
qinpos++;
}
if ((ahc->features & AHC_QUEUE_REGS) != 0) {
ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
} else {
ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
}
/*
* Search waiting for selection list.
*/
curscbptr = ahc_inb(ahc, SCBPTR);
next = ahc_inb(ahc, WAITING_SCBH); /* Start at head of list. */
prev = SCB_LIST_NULL;
while (next != SCB_LIST_NULL) {
uint8_t scb_index;
ahc_outb(ahc, SCBPTR, next);
scb_index = ahc_inb(ahc, SCB_TAG);
if (scb_index >= ahc->scb_data->numscbs) {
panic("Waiting List inconsistency. "
"SCB index == %d, yet numscbs == %d.",
scb_index, ahc->scb_data->numscbs);
}
scbp = &ahc->scb_data->scbarray[scb_index];
if (ahc_match_scb(ahc, scbp, target, channel,
lun, SCB_LIST_NULL, role)) {
/*
* We found an scb that needs to be acted on.
*/
found++;
switch (action) {
case SEARCH_REMOVE:
next = ahc_rem_wscb(ahc, next, prev);
break;
case SEARCH_COMPLETE:
next = ahc_rem_wscb(ahc, next, prev);
if (ahc_ccb_status(scbp->ccb) == CAM_REQ_INPROG)
ahcsetccbstatus(scbp->ccb, status);
ahc_freeze_ccb(scbp->ccb);
ahc_done(ahc, scbp);
break;
case SEARCH_COUNT:
prev = next;
next = ahc_inb(ahc, SCB_NEXT);
break;
}
} else {
prev = next;
next = ahc_inb(ahc, SCB_NEXT);
}
}
ahc_outb(ahc, SCBPTR, curscbptr);
if (action == SEARCH_COMPLETE)
ahc_release_untagged_queues(ahc);
return (found);
}
static void
ahc_abort_ccb(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb)
{
union ccb *abort_ccb;
abort_ccb = ccb->cab.abort_ccb;
switch (abort_ccb->ccb_h.func_code) {
case XPT_ACCEPT_TARGET_IO:
case XPT_IMMED_NOTIFY:
case XPT_CONT_TARGET_IO:
{
struct tmode_tstate *tstate;
struct tmode_lstate *lstate;
struct ccb_hdr_slist *list;
cam_status status;
status = ahc_find_tmode_devs(ahc, sim, abort_ccb, &tstate,
&lstate, TRUE);
if (status != CAM_REQ_CMP) {
ccb->ccb_h.status = status;
break;
}
if (abort_ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO)
list = &lstate->accept_tios;
else if (abort_ccb->ccb_h.func_code == XPT_IMMED_NOTIFY)
list = &lstate->immed_notifies;
else
list = NULL;
if (list != NULL) {
struct ccb_hdr *curelm;
int found;
curelm = SLIST_FIRST(list);
found = 0;
if (curelm == &abort_ccb->ccb_h) {
found = 1;
SLIST_REMOVE_HEAD(list, sim_links.sle);
} else {
while(curelm != NULL) {
struct ccb_hdr *nextelm;
nextelm =
SLIST_NEXT(curelm, sim_links.sle);
if (nextelm == &abort_ccb->ccb_h) {
found = 1;
SLIST_NEXT(curelm,
sim_links.sle) =
SLIST_NEXT(nextelm,
sim_links.sle);
break;
}
curelm = nextelm;
}
}
if (found) {
abort_ccb->ccb_h.status = CAM_REQ_ABORTED;
xpt_done(abort_ccb);
ccb->ccb_h.status = CAM_REQ_CMP;
} else {
printf("Not found\n");
ccb->ccb_h.status = CAM_PATH_INVALID;
}
break;
}
/* FALLTHROUGH */
}
case XPT_SCSI_IO:
/* XXX Fully implement the hard ones */
ccb->ccb_h.status = CAM_UA_ABORT;
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
}
/*
* Abort all SCBs that match the given description (target/channel/lun/tag),
* setting their status to the passed in status if the status has not already
* been modified from CAM_REQ_INPROG. This routine assumes that the sequencer
* is paused before it is called.
*/
static int
ahc_abort_scbs(struct ahc_softc *ahc, int target, char channel,
int lun, u_int tag, role_t role, uint32_t status)
{
struct scb *scbp;
u_int active_scb;
int i;
int maxtarget;
int found;
/*
* Don't attempt to run any queued untagged transactions
* until we are done with the abort process.
*/
ahc_freeze_untagged_queues(ahc);
/* restore this when we're done */
active_scb = ahc_inb(ahc, SCBPTR);
found = ahc_search_qinfifo(ahc, target, channel, lun, SCB_LIST_NULL,
role, CAM_REQUEUE_REQ, SEARCH_COMPLETE);
/*
* Clean out the busy target table for any untagged commands.
*/
i = 0;
maxtarget = 16;
if (target != CAM_TARGET_WILDCARD) {
i = target;
maxtarget = target + 1;
}
for (;i < maxtarget; i++) {
u_int scbid;
scbid = ahc_index_busy_tcl(ahc, BUILD_TCL(i << 4, 0),
/*unbusy*/FALSE);
scbp = &ahc->scb_data->scbarray[scbid];
if (scbid < ahc->scb_data->numscbs
&& ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)) {
u_int minlun;
u_int maxlun;
if (lun == CAM_LUN_WILDCARD) {
/*
* Unless we are using an SCB based
* busy targets table, there is only
* one table entry for all luns of
* a target.
*/
minlun = 0;
maxlun = 1;
if ((ahc->flags & AHC_SCB_BTT) != 0)
maxlun = AHC_NUM_LUNS;
} else {
minlun = lun;
maxlun = lun + 1;
}
while (minlun < maxlun) {
ahc_index_busy_tcl(ahc, BUILD_TCL(i << 4,
minlun), /*unbusy*/TRUE);
minlun++;
}
}
}
/*
* Go through the disconnected list and remove any entries we
* have queued for completion, 0'ing their control byte too.
* We save the active SCB and restore it ourselves, so there
* is no reason for this search to restore it too.
*/
ahc_search_disc_list(ahc, target, channel, lun, tag,
/*stop_on_first*/FALSE, /*remove*/TRUE,
/*save_state*/FALSE);
/*
* Go through the hardware SCB array looking for commands that
* were active but not on any list.
*/
for(i = 0; i < ahc->scb_data->maxhscbs; i++) {
u_int scbid;
ahc_outb(ahc, SCBPTR, i);
scbid = ahc_inb(ahc, SCB_TAG);
scbp = &ahc->scb_data->scbarray[scbid];
if (scbid < ahc->scb_data->numscbs
&& ahc_match_scb(ahc, scbp, target, channel, lun, tag, role))
ahc_add_curscb_to_free_list(ahc);
}
/*
* Go through the pending CCB list and look for
* commands for this target that are still active.
* These are other tagged commands that were
* disconnected when the reset occured.
*/
{
struct ccb_hdr *ccb_h;
ccb_h = ahc->pending_ccbs.lh_first;
while (ccb_h != NULL) {
scbp = (struct scb *)ccb_h->ccb_scb_ptr;
ccb_h = ccb_h->sim_links.le.le_next;
if (ahc_match_scb(ahc, scbp, target, channel,
lun, tag, role)) {
if (ahc_ccb_status(scbp->ccb) == CAM_REQ_INPROG)
ahcsetccbstatus(scbp->ccb, status);
ahc_freeze_ccb(scbp->ccb);
ahc_done(ahc, scbp);
found++;
}
}
}
ahc_outb(ahc, SCBPTR, active_scb);
ahc_release_untagged_queues(ahc);
return found;
}
static int
ahc_search_disc_list(struct ahc_softc *ahc, int target, char channel,
int lun, u_int tag, int stop_on_first, int remove,
int save_state)
{
struct scb *scbp;
u_int next;
u_int prev;
u_int count;
u_int active_scb;
count = 0;
next = ahc_inb(ahc, DISCONNECTED_SCBH);
prev = SCB_LIST_NULL;
if (save_state) {
/* restore this when we're done */
active_scb = ahc_inb(ahc, SCBPTR);
} else
/* Silence compiler */
active_scb = SCB_LIST_NULL;
while (next != SCB_LIST_NULL) {
u_int scb_index;
ahc_outb(ahc, SCBPTR, next);
scb_index = ahc_inb(ahc, SCB_TAG);
if (scb_index >= ahc->scb_data->numscbs) {
panic("Disconnected List inconsistency. "
"SCB index == %d, yet numscbs == %d.",
scb_index, ahc->scb_data->numscbs);
}
if (next == prev) {
panic("Disconnected List Loop. "
"cur SCBPTR == %x, prev SCBPTR == %x.",
next, prev);
}
scbp = &ahc->scb_data->scbarray[scb_index];
if (ahc_match_scb(ahc, scbp, target, channel, lun,
tag, ROLE_INITIATOR)) {
count++;
if (remove) {
next =
ahc_rem_scb_from_disc_list(ahc, prev, next);
} else {
prev = next;
next = ahc_inb(ahc, SCB_NEXT);
}
if (stop_on_first)
break;
} else {
prev = next;
next = ahc_inb(ahc, SCB_NEXT);
}
}
if (save_state)
ahc_outb(ahc, SCBPTR, active_scb);
return (count);
}
static u_int
ahc_rem_scb_from_disc_list(struct ahc_softc *ahc, u_int prev, u_int scbptr)
{
u_int next;
ahc_outb(ahc, SCBPTR, scbptr);
next = ahc_inb(ahc, SCB_NEXT);
ahc_outb(ahc, SCB_CONTROL, 0);
ahc_add_curscb_to_free_list(ahc);
if (prev != SCB_LIST_NULL) {
ahc_outb(ahc, SCBPTR, prev);
ahc_outb(ahc, SCB_NEXT, next);
} else
ahc_outb(ahc, DISCONNECTED_SCBH, next);
return (next);
}
static void
ahc_add_curscb_to_free_list(struct ahc_softc *ahc)
{
/* Invalidate the tag so that ahc_find_scb doesn't think it's active */
ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL);
ahc_outb(ahc, SCB_NEXT, ahc_inb(ahc, FREE_SCBH));
ahc_outb(ahc, FREE_SCBH, ahc_inb(ahc, SCBPTR));
}
/*
* Manipulate the waiting for selection list and return the
* scb that follows the one that we remove.
*/
static u_int
ahc_rem_wscb(struct ahc_softc *ahc, u_int scbpos, u_int prev)
{
u_int curscb, next;
/*
* Select the SCB we want to abort and
* pull the next pointer out of it.
*/
curscb = ahc_inb(ahc, SCBPTR);
ahc_outb(ahc, SCBPTR, scbpos);
next = ahc_inb(ahc, SCB_NEXT);
/* Clear the necessary fields */
ahc_outb(ahc, SCB_CONTROL, 0);
ahc_add_curscb_to_free_list(ahc);
/* update the waiting list */
if (prev == SCB_LIST_NULL) {
/* First in the list */
ahc_outb(ahc, WAITING_SCBH, next);
/*
* Ensure we aren't attempting to perform
* selection for this entry.
*/
ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
} else {
/*
* Select the scb that pointed to us
* and update its next pointer.
*/
ahc_outb(ahc, SCBPTR, prev);
ahc_outb(ahc, SCB_NEXT, next);
}
/*
* Point us back at the original scb position.
*/
ahc_outb(ahc, SCBPTR, curscb);
return next;
}
static void
ahc_clear_intstat(struct ahc_softc *ahc)
{
/* Clear any interrupt conditions this may have caused */
ahc_outb(ahc, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO);
ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI
|CLRBUSFREE|CLRSCSIPERR|CLRPHASECHG|
CLRREQINIT);
ahc_outb(ahc, CLRINT, CLRSCSIINT);
}
static void
ahc_reset_current_bus(struct ahc_softc *ahc)
{
uint8_t scsiseq;
ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENSCSIRST);
scsiseq = ahc_inb(ahc, SCSISEQ);
ahc_outb(ahc, SCSISEQ, scsiseq | SCSIRSTO);
DELAY(AHC_BUSRESET_DELAY);
/* Turn off the bus reset */
ahc_outb(ahc, SCSISEQ, scsiseq & ~SCSIRSTO);
ahc_clear_intstat(ahc);
/* Re-enable reset interrupts */
ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) | ENSCSIRST);
}
static int
ahc_reset_channel(struct ahc_softc *ahc, char channel, int initiate_reset)
{
struct cam_path *path;
u_int initiator, target, max_scsiid;
u_int sblkctl;
u_int our_id;
int found;
int restart_needed;
char cur_channel;
ahc->pending_device = NULL;
pause_sequencer(ahc);
/*
* Run our command complete fifos to ensure that we perform
* completion processing on any commands that 'completed'
* before the reset occurred.
*/
ahc_run_qoutfifo(ahc);
if ((ahc->flags & AHC_TARGETMODE) != 0) {
ahc_run_tqinfifo(ahc, /*paused*/TRUE);
}
/*
* Reset the bus if we are initiating this reset
*/
sblkctl = ahc_inb(ahc, SBLKCTL);
cur_channel = 'A';
if ((ahc->features & AHC_TWIN) != 0
&& ((sblkctl & SELBUSB) != 0))
cur_channel = 'B';
if (cur_channel != channel) {
/* Case 1: Command for another bus is active
* Stealthily reset the other bus without
* upsetting the current bus.
*/
ahc_outb(ahc, SBLKCTL, sblkctl ^ SELBUSB);
ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE);
ahc_outb(ahc, SCSISEQ,
ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
if (initiate_reset)
ahc_reset_current_bus(ahc);
ahc_clear_intstat(ahc);
ahc_outb(ahc, SBLKCTL, sblkctl);
restart_needed = FALSE;
} else {
/* Case 2: A command from this bus is active or we're idle */
ahc_clear_msg_state(ahc);
ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE);
ahc_outb(ahc, SCSISEQ,
ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
if (initiate_reset)
ahc_reset_current_bus(ahc);
ahc_clear_intstat(ahc);
/*
* Since we are going to restart the sequencer, avoid
* a race in the sequencer that could cause corruption
* of our Q pointers by starting over from index 1.
*/
ahc->qoutfifonext = 0;
if ((ahc->features & AHC_QUEUE_REGS) != 0)
ahc_outb(ahc, SDSCB_QOFF, 0);
else
ahc_outb(ahc, QOUTPOS, 0);
if ((ahc->flags & AHC_TARGETMODE) != 0) {
ahc->tqinfifonext = 1;
ahc_outb(ahc, KERNEL_TQINPOS, ahc->tqinfifonext - 1);
ahc_outb(ahc, TQINPOS, ahc->tqinfifonext);
if ((ahc->features & AHC_HS_MAILBOX) != 0) {
u_int hs_mailbox;
hs_mailbox = ahc_inb(ahc, HS_MAILBOX);
hs_mailbox &= ~HOST_TQINPOS;
ahc_outb(ahc, HS_MAILBOX, hs_mailbox);
}
}
restart_needed = TRUE;
}
/*
* Clean up all the state information for the
* pending transactions on this bus.
*/
found = ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, channel,
CAM_LUN_WILDCARD, SCB_LIST_NULL,
ROLE_UNKNOWN, CAM_SCSI_BUS_RESET);
if (channel == 'B') {
path = ahc->path_b;
our_id = ahc->our_id_b;
} else {
path = ahc->path;
our_id = ahc->our_id;
}
max_scsiid = (ahc->features & AHC_WIDE) ? 15 : 7;
/*
* Send an immediate notify ccb to all target more peripheral
* drivers affected by this action.
*/
for (target = 0; target <= max_scsiid; target++) {
struct tmode_tstate* tstate;
u_int lun;
tstate = ahc->enabled_targets[target];
if (tstate == NULL)
continue;
for (lun = 0; lun <= 7; lun++) {
struct tmode_lstate* lstate;
lstate = tstate->enabled_luns[lun];
if (lstate == NULL)
continue;
ahc_queue_lstate_event(ahc, lstate, CAM_TARGET_WILDCARD,
EVENT_TYPE_BUS_RESET, /*arg*/0);
ahc_send_lstate_events(ahc, lstate);
}
}
/* Notify the XPT that a bus reset occurred */
xpt_async(AC_BUS_RESET, path, NULL);
/*
* Revert to async/narrow transfers until we renegotiate.
*/
for (target = 0; target <= max_scsiid; target++) {
if (ahc->enabled_targets[target] == NULL)
continue;
for (initiator = 0; initiator <= max_scsiid; initiator++) {
struct ahc_devinfo devinfo;
ahc_compile_devinfo(&devinfo, target, initiator,
CAM_LUN_WILDCARD,
channel, ROLE_UNKNOWN);
ahc_set_width(ahc, &devinfo, path,
MSG_EXT_WDTR_BUS_8_BIT,
AHC_TRANS_CUR, /*paused*/TRUE);
ahc_set_syncrate(ahc, &devinfo, path,
/*syncrate*/NULL, /*period*/0,
/*offset*/0, /*ppr_options*/0,
AHC_TRANS_CUR, /*paused*/TRUE);
}
}
if (restart_needed)
restart_sequencer(ahc);
else
unpause_sequencer(ahc);
return found;
}
static int
ahc_match_scb(struct ahc_softc *ahc, struct scb *scb, int target,
char channel, int lun, u_int tag, role_t role)
{
int targ = SCB_GET_TARGET(ahc, scb);
char chan = SCB_GET_CHANNEL(ahc, scb);
int slun = SCB_GET_LUN(scb);
int match;
match = ((chan == channel) || (channel == ALL_CHANNELS));
if (match != 0)
match = ((targ == target) || (target == CAM_TARGET_WILDCARD));
if (match != 0)
match = ((lun == slun) || (lun == CAM_LUN_WILDCARD));
if (match != 0) {
int group;
group = XPT_FC_GROUP(scb->ccb->ccb_h.func_code);
if (role == ROLE_INITIATOR) {
match = (group == XPT_FC_GROUP_COMMON)
&& ((tag == scb->hscb->tag)
|| (tag == SCB_LIST_NULL));
} else if (role == ROLE_TARGET) {
match = (group == XPT_FC_GROUP_TMODE)
&& ((tag == scb->ccb->csio.tag_id)
|| (tag == SCB_LIST_NULL));
}
}
return match;
}
static void
ahc_construct_sdtr(struct ahc_softc *ahc, u_int period, u_int offset)
{
ahc->msgout_buf[ahc->msgout_index++] = MSG_EXTENDED;
ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_SDTR_LEN;
ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_SDTR;
ahc->msgout_buf[ahc->msgout_index++] = period;
ahc->msgout_buf[ahc->msgout_index++] = offset;
ahc->msgout_len += 5;
}
static void
ahc_construct_wdtr(struct ahc_softc *ahc, u_int bus_width)
{
ahc->msgout_buf[ahc->msgout_index++] = MSG_EXTENDED;
ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_WDTR_LEN;
ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_WDTR;
ahc->msgout_buf[ahc->msgout_index++] = bus_width;
ahc->msgout_len += 4;
}
static void
ahc_construct_ppr(struct ahc_softc *ahc, u_int period, u_int offset,
u_int bus_width, u_int ppr_options)
{
ahc->msgout_buf[ahc->msgout_index++] = MSG_EXTENDED;
ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_PPR_LEN;
ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_PPR;
ahc->msgout_buf[ahc->msgout_index++] = period;
ahc->msgout_buf[ahc->msgout_index++] = 0;
ahc->msgout_buf[ahc->msgout_index++] = offset;
ahc->msgout_buf[ahc->msgout_index++] = bus_width;
ahc->msgout_buf[ahc->msgout_index++] = ppr_options;
ahc->msgout_len += 8;
}
static void
ahc_calc_residual(struct scb *scb)
{
struct hardware_scb *hscb;
struct status_pkt *spkt;
uint32_t resid;
/*
* 5 cases.
* 1) No residual.
* SG_RESID_VALID clear in sgptr.
* 2) Transferless command
* 3) Never performed any transfers.
* sgptr has SG_FULL_RESID set.
* 4) No residual but target did not
* save data pointers after the
* last transfer, so sgptr was
* never updated.
* 5) We have a partial residual.
* Use residual_sgptr to determine
* where we are.
*/
hscb = scb->hscb;
if ((hscb->sgptr & SG_RESID_VALID) == 0)
/* Case 1 */
return;
hscb->sgptr &= ~SG_RESID_VALID;
if ((hscb->sgptr & SG_LIST_NULL) != 0)
/* Case 2 */
return;
spkt = &hscb->shared_data.status;
if ((hscb->sgptr & SG_FULL_RESID) != 0)
/* Case 3 */
resid = scb->ccb->csio.dxfer_len;
else if ((spkt->residual_sg_ptr & SG_LIST_NULL) != 0)
/* Case 4 */
return;
else if ((spkt->residual_sg_ptr & ~SG_PTR_MASK) != 0)
panic("Bogus resid sgptr value 0x%x\n", spkt->residual_sg_ptr);
else {
struct ahc_dma_seg *sg;
/*
* Remainder of the SG where the transfer
* stopped.
*/
resid = spkt->residual_datacnt & AHC_SG_LEN_MASK;
sg = ahc_sg_bus_to_virt(scb,
spkt->residual_sg_ptr & SG_PTR_MASK);
/* The residual sg_ptr always points to the next sg */
sg--;
/*
* Add up the contents of all residual
* SG segments that are after the SG where
* the transfer stopped.
*/
while ((sg->len & AHC_DMA_LAST_SEG) == 0) {
sg++;
resid += sg->len & AHC_SG_LEN_MASK;
}
}
if ((scb->flags & SCB_SENSE) == 0) {
scb->ccb->csio.resid = resid;
} else {
scb->ccb->csio.sense_resid = resid;
}
#ifdef AHC_DEBUG
if (ahc_debug & AHC_SHOWMISC) {
xpt_print_path(scb->ccb->ccb_h.path);
printf("Handled Residual of %d bytes\n", resid);
}
#endif
}
static void
ahc_update_pending_syncrates(struct ahc_softc *ahc)
{
struct ccb_hdr *ccbh;
int pending_ccb_count;
int i;
u_int saved_scbptr;
/*
* Traverse the pending SCB list and ensure that all of the
* SCBs there have the proper settings.
*/
ccbh = LIST_FIRST(&ahc->pending_ccbs);
pending_ccb_count = 0;
while (ccbh != NULL) {
struct ahc_devinfo devinfo;
union ccb *ccb;
struct scb *pending_scb;
struct hardware_scb *pending_hscb;
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
u_int our_id, remote_id;
ccb = (union ccb*)ccbh;
pending_scb = (struct scb *)ccbh->ccb_scb_ptr;
pending_hscb = pending_scb->hscb;
if (ccbh->func_code == XPT_CONT_TARGET_IO) {
our_id = ccb->ccb_h.target_id;
remote_id = ccb->ctio.init_id;
} else {
our_id = SCB_IS_SCSIBUS_B(ahc, pending_scb)
? ahc->our_id_b : ahc->our_id;
remote_id = ccb->ccb_h.target_id;
}
ahc_compile_devinfo(&devinfo, our_id, remote_id,
SCB_GET_LUN(pending_scb),
SCB_GET_CHANNEL(ahc, pending_scb),
ROLE_UNKNOWN);
tinfo = ahc_fetch_transinfo(ahc, devinfo.channel,
our_id, remote_id, &tstate);
pending_hscb->control &= ~ULTRAENB;
if ((tstate->ultraenb & devinfo.target_mask) != 0)
pending_hscb->control |= ULTRAENB;
pending_hscb->scsirate = tinfo->scsirate;
pending_hscb->scsioffset = tinfo->current.offset;
pending_ccb_count++;
ccbh = LIST_NEXT(ccbh, sim_links.le);
}
if (pending_ccb_count == 0)
return;
saved_scbptr = ahc_inb(ahc, SCBPTR);
/* Ensure that the hscbs down on the card match the new information */
for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
u_int scb_tag;
ahc_outb(ahc, SCBPTR, i);
scb_tag = ahc_inb(ahc, SCB_TAG);
if (scb_tag != SCB_LIST_NULL) {
struct ahc_devinfo devinfo;
union ccb *ccb;
struct scb *pending_scb;
struct hardware_scb *pending_hscb;
struct ahc_initiator_tinfo *tinfo;
struct tmode_tstate *tstate;
u_int our_id, remote_id;
u_int control;
pending_scb = &ahc->scb_data->scbarray[scb_tag];
if (pending_scb->flags == SCB_FREE)
continue;
pending_hscb = pending_scb->hscb;
ccb = pending_scb->ccb;
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
our_id = ccb->ccb_h.target_id;
remote_id = ccb->ctio.init_id;
} else {
our_id = SCB_IS_SCSIBUS_B(ahc, pending_scb)
? ahc->our_id_b : ahc->our_id;
remote_id = ccb->ccb_h.target_id;
}
ahc_compile_devinfo(&devinfo, our_id, remote_id,
SCB_GET_LUN(pending_scb),
SCB_GET_CHANNEL(ahc, pending_scb),
ROLE_UNKNOWN);
tinfo = ahc_fetch_transinfo(ahc, devinfo.channel,
our_id, remote_id, &tstate);
control = ahc_inb(ahc, SCB_CONTROL);
control &= ~ULTRAENB;
if ((tstate->ultraenb & devinfo.target_mask) != 0)
control |= ULTRAENB;
ahc_outb(ahc, SCB_CONTROL, control);
ahc_outb(ahc, SCB_SCSIRATE, tinfo->scsirate);
ahc_outb(ahc, SCB_SCSIOFFSET, tinfo->current.offset);
}
}
ahc_outb(ahc, SCBPTR, saved_scbptr);
}
#if UNUSED
static void
ahc_dump_targcmd(struct target_cmd *cmd)
{
uint8_t *byte;
uint8_t *last_byte;
int i;
byte = &cmd->initiator_channel;
/* Debugging info for received commands */
last_byte = &cmd[1].initiator_channel;
i = 0;
while (byte < last_byte) {
if (i == 0)
printf("\t");
printf("%#x", *byte++);
i++;
if (i == 8) {
printf("\n");
i = 0;
} else {
printf(", ");
}
}
}
#endif
static void
ahc_shutdown(void *arg, int howto)
{
struct ahc_softc *ahc;
int i;
u_int sxfrctl1_a, sxfrctl1_b;
ahc = (struct ahc_softc *)arg;
pause_sequencer(ahc);
/*
* Preserve the value of the SXFRCTL1 register for all channels.
* It contains settings that affect termination and we don't want
* to disturb the integrity of the bus during shutdown in case
* we are in a multi-initiator setup.
*/
sxfrctl1_b = 0;
if ((ahc->features & AHC_TWIN) != 0) {
u_int sblkctl;
sblkctl = ahc_inb(ahc, SBLKCTL);
ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB);
sxfrctl1_b = ahc_inb(ahc, SXFRCTL1);
ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB);
}
sxfrctl1_a = ahc_inb(ahc, SXFRCTL1);
/* This will reset most registers to 0, but not all */
ahc_reset(ahc);
if ((ahc->features & AHC_TWIN) != 0) {
u_int sblkctl;
sblkctl = ahc_inb(ahc, SBLKCTL);
ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB);
ahc_outb(ahc, SXFRCTL1, sxfrctl1_b);
ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB);
}
ahc_outb(ahc, SXFRCTL1, sxfrctl1_a);
ahc_outb(ahc, SCSISEQ, 0);
ahc_outb(ahc, SXFRCTL0, 0);
ahc_outb(ahc, DSPCISTATUS, 0);
for (i = TARG_SCSIRATE; i < HA_274_BIOSCTRL; i++)
ahc_outb(ahc, i, 0);
}
/*
* Add a target mode event to this lun's queue
*/
static void
ahc_queue_lstate_event(struct ahc_softc *ahc, struct tmode_lstate *lstate,
u_int initiator_id, u_int event_type, u_int event_arg)
{
struct ahc_tmode_event *event;
int pending;
xpt_freeze_devq(lstate->path, /*count*/1);
if (lstate->event_w_idx >= lstate->event_r_idx)
pending = lstate->event_w_idx - lstate->event_r_idx;
else
pending = AHC_TMODE_EVENT_BUFFER_SIZE + 1
- (lstate->event_r_idx - lstate->event_w_idx);
if (event_type == EVENT_TYPE_BUS_RESET
|| event_type == MSG_BUS_DEV_RESET) {
/*
* Any earlier events are irrelevant, so reset our buffer.
* This has the effect of allowing us to deal with reset
* floods (an external device holding down the reset line)
* without losing the event that is really interesting.
*/
lstate->event_r_idx = 0;
lstate->event_w_idx = 0;
xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE);
}
if (pending == AHC_TMODE_EVENT_BUFFER_SIZE) {
xpt_print_path(lstate->path);
printf("immediate event %x:%x lost\n",
lstate->event_buffer[lstate->event_r_idx].event_type,
lstate->event_buffer[lstate->event_r_idx].event_arg);
lstate->event_r_idx++;
if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
lstate->event_r_idx = 0;
xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE);
}
event = &lstate->event_buffer[lstate->event_w_idx];
event->initiator_id = initiator_id;
event->event_type = event_type;
event->event_arg = event_arg;
lstate->event_w_idx++;
if (lstate->event_w_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
lstate->event_w_idx = 0;
}
/*
* Send any target mode events queued up waiting
* for immediate notify resources.
*/
static void
ahc_send_lstate_events(struct ahc_softc *ahc, struct tmode_lstate *lstate)
{
struct ccb_hdr *ccbh;
struct ccb_immed_notify *inot;
while (lstate->event_r_idx != lstate->event_w_idx
&& (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) {
struct ahc_tmode_event *event;
event = &lstate->event_buffer[lstate->event_r_idx];
SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle);
inot = (struct ccb_immed_notify *)ccbh;
switch (event->event_type) {
case EVENT_TYPE_BUS_RESET:
ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN;
break;
default:
ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
inot->message_args[0] = event->event_type;
inot->message_args[1] = event->event_arg;
break;
}
inot->initiator_id = event->initiator_id;
inot->sense_len = 0;
xpt_done((union ccb *)inot);
lstate->event_r_idx++;
if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
lstate->event_r_idx = 0;
}
}