7ee69ef245
- remove some useless code from the status change handler that was intended to enable the the MII drivers for external phys; this is already done during interface initialization, and the deleted code made some assumptions about phy addresses that do not seem to hold true on newer cards. This should get at least one of the two hmes of newer Netra t1 machines working. - correct the interrupt resource allocation - bump the number of RX descriptors, lower values cause promblems on some machines
277 lines
8.0 KiB
C
277 lines
8.0 KiB
C
/*-
|
|
* Copyright (c) 1999 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Paul Kranenburg.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* from: NetBSD: if_hme_sbus.c,v 1.9 2001/11/13 06:58:17 lukem Exp
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* SBus front-end device driver for the HME ethernet device.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/resource.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/ofw_machdep.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <sys/rman.h>
|
|
|
|
#include <ofw/openfirm.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <mii/mii.h>
|
|
#include <mii/miivar.h>
|
|
|
|
#include <sparc64/sbus/sbusvar.h>
|
|
|
|
#include <hme/if_hmereg.h>
|
|
#include <hme/if_hmevar.h>
|
|
|
|
#include "miibus_if.h"
|
|
|
|
struct hme_sbus_softc {
|
|
struct hme_softc hsc_hme; /* HME device */
|
|
struct resource *hsc_seb_res;
|
|
int hsc_seb_rid;
|
|
struct resource *hsc_etx_res;
|
|
int hsc_etx_rid;
|
|
struct resource *hsc_erx_res;
|
|
int hsc_erx_rid;
|
|
struct resource *hsc_mac_res;
|
|
int hsc_mac_rid;
|
|
struct resource *hsc_mif_res;
|
|
int hsc_mif_rid;
|
|
struct resource *hsc_ires;
|
|
int hsc_irid;
|
|
void *hsc_ih;
|
|
};
|
|
|
|
static int hme_sbus_probe(device_t);
|
|
static int hme_sbus_attach(device_t);
|
|
|
|
static device_method_t hme_sbus_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, hme_sbus_probe),
|
|
DEVMETHOD(device_attach, hme_sbus_attach),
|
|
|
|
/* bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, hme_mii_readreg),
|
|
DEVMETHOD(miibus_writereg, hme_mii_writereg),
|
|
DEVMETHOD(miibus_statchg, hme_mii_statchg),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t hme_sbus_driver = {
|
|
"hme",
|
|
hme_sbus_methods,
|
|
sizeof(struct hme_sbus_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(if_hme, sbus, hme_sbus_driver, hme_devclass, 0, 0);
|
|
|
|
static int
|
|
hme_sbus_probe(device_t dev)
|
|
{
|
|
char *name;
|
|
|
|
name = sbus_get_name(dev);
|
|
if (strcmp(name, "SUNW,qfe") == 0 ||
|
|
strcmp(name, "SUNW,hme") == 0) {
|
|
device_set_desc(dev, "Sun HME 10/100 Ethernet");
|
|
return (0);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
hme_sbus_attach(device_t dev)
|
|
{
|
|
struct hme_sbus_softc *hsc = device_get_softc(dev);
|
|
struct hme_softc *sc = &hsc->hsc_hme;
|
|
u_int32_t burst;
|
|
u_long start, count;
|
|
int error;
|
|
|
|
/*
|
|
* Map five register banks:
|
|
*
|
|
* bank 0: HME SEB registers
|
|
* bank 1: HME ETX registers
|
|
* bank 2: HME ERX registers
|
|
* bank 3: HME MAC registers
|
|
* bank 4: HME MIF registers
|
|
*
|
|
*/
|
|
sc->sc_sebo = sc->sc_etxo = sc->sc_erxo = sc->sc_maco = sc->sc_mifo = 0;
|
|
hsc->hsc_seb_rid = 0;
|
|
hsc->hsc_seb_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&hsc->hsc_seb_rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (hsc->hsc_seb_res == NULL) {
|
|
device_printf(dev, "cannot map SEB registers\n");
|
|
return (ENXIO);
|
|
}
|
|
sc->sc_sebt = rman_get_bustag(hsc->hsc_seb_res);
|
|
sc->sc_sebh = rman_get_bushandle(hsc->hsc_seb_res);
|
|
|
|
hsc->hsc_etx_rid = 1;
|
|
hsc->hsc_etx_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&hsc->hsc_etx_rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (hsc->hsc_etx_res == NULL) {
|
|
device_printf(dev, "cannot map ETX registers\n");
|
|
goto fail_seb_res;
|
|
}
|
|
sc->sc_etxt = rman_get_bustag(hsc->hsc_etx_res);
|
|
sc->sc_etxh = rman_get_bushandle(hsc->hsc_etx_res);
|
|
|
|
hsc->hsc_erx_rid = 2;
|
|
hsc->hsc_erx_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&hsc->hsc_erx_rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (hsc->hsc_erx_res == NULL) {
|
|
device_printf(dev, "cannot map ERX registers\n");
|
|
goto fail_etx_res;
|
|
}
|
|
sc->sc_erxt = rman_get_bustag(hsc->hsc_erx_res);
|
|
sc->sc_erxh = rman_get_bushandle(hsc->hsc_erx_res);
|
|
|
|
hsc->hsc_mac_rid = 3;
|
|
hsc->hsc_mac_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&hsc->hsc_mac_rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (hsc->hsc_mac_res == NULL) {
|
|
device_printf(dev, "cannot map MAC registers\n");
|
|
goto fail_erx_res;
|
|
}
|
|
sc->sc_mact = rman_get_bustag(hsc->hsc_mac_res);
|
|
sc->sc_mach = rman_get_bushandle(hsc->hsc_mac_res);
|
|
|
|
/*
|
|
* At least on some HMEs, the MIF registers seem to be inside the MAC
|
|
* range, so map try to kluge around it.
|
|
*/
|
|
hsc->hsc_mif_rid = 4;
|
|
hsc->hsc_mif_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&hsc->hsc_mif_rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (hsc->hsc_mif_res == NULL) {
|
|
if (bus_get_resource(dev, SYS_RES_MEMORY, hsc->hsc_mif_rid,
|
|
&start, &count) != 0) {
|
|
device_printf(dev, "cannot get MIF registers\n");
|
|
goto fail_mac_res;
|
|
}
|
|
if (start < rman_get_start(hsc->hsc_mac_res) ||
|
|
start + count - 1 > rman_get_end(hsc->hsc_mac_res)) {
|
|
device_printf(dev, "cannot move MIF registers to MAC "
|
|
"bank\n");
|
|
goto fail_mac_res;
|
|
}
|
|
sc->sc_mift = sc->sc_mact;
|
|
sc->sc_mifh = sc->sc_mach;
|
|
sc->sc_mifo = sc->sc_maco + start -
|
|
rman_get_start(hsc->hsc_mac_res);
|
|
} else {
|
|
sc->sc_mift = rman_get_bustag(hsc->hsc_mif_res);
|
|
sc->sc_mifh = rman_get_bushandle(hsc->hsc_mif_res);
|
|
}
|
|
|
|
hsc->hsc_irid = 0;
|
|
hsc->hsc_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &hsc->hsc_irid, 0,
|
|
~0, 1, RF_SHAREABLE | RF_ACTIVE);
|
|
if (hsc->hsc_ires == NULL) {
|
|
device_printf(dev, "could not allocate interrupt\n");
|
|
error = ENXIO;
|
|
goto fail_mif_res;
|
|
}
|
|
|
|
|
|
OF_getetheraddr(dev, sc->sc_arpcom.ac_enaddr);
|
|
|
|
burst = sbus_get_burstsz(dev);
|
|
/* Translate into plain numerical format */
|
|
sc->sc_burst = (burst & SBUS_BURST_32) ? 32 :
|
|
(burst & SBUS_BURST_16) ? 16 : 0;
|
|
|
|
sc->sc_pci = 0; /* XXX: should all be done in bus_dma. */
|
|
sc->sc_dev = dev;
|
|
|
|
if ((error = hme_config(sc)) != 0) {
|
|
device_printf(dev, "could not be configured\n");
|
|
goto fail_ires;
|
|
}
|
|
|
|
|
|
if ((error = bus_setup_intr(dev, hsc->hsc_ires, INTR_TYPE_NET, hme_intr,
|
|
sc, &hsc->hsc_ih)) != 0) {
|
|
device_printf(dev, "couldn't establish interrupt\n");
|
|
goto fail_ires;
|
|
}
|
|
return (0);
|
|
|
|
fail_ires:
|
|
bus_release_resource(dev, SYS_RES_IRQ, hsc->hsc_irid, hsc->hsc_ires);
|
|
fail_mif_res:
|
|
if (hsc->hsc_mif_res != NULL) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY, hsc->hsc_mif_rid,
|
|
hsc->hsc_mif_res);
|
|
}
|
|
fail_mac_res:
|
|
bus_release_resource(dev, SYS_RES_MEMORY, hsc->hsc_mac_rid,
|
|
hsc->hsc_mac_res);
|
|
fail_erx_res:
|
|
bus_release_resource(dev, SYS_RES_MEMORY, hsc->hsc_erx_rid,
|
|
hsc->hsc_erx_res);
|
|
fail_etx_res:
|
|
bus_release_resource(dev, SYS_RES_MEMORY, hsc->hsc_etx_rid,
|
|
hsc->hsc_etx_res);
|
|
fail_seb_res:
|
|
bus_release_resource(dev, SYS_RES_MEMORY, hsc->hsc_seb_rid,
|
|
hsc->hsc_seb_res);
|
|
return (ENXIO);
|
|
}
|