Adrian Chadd d5d2dbef65 Cast everything to something longer than 32 bits so the sample mask ... doesn't get truncated to 32 bits. Without this, 3x3 NICs transmitting at an MCS rate whose rix (rate index) in the rate table is > 31 end up returning errors, as the sample rate code doesn't think the rate is set in the rate table. Tested: * AR9380, STA, speaking 3x3 to an AP		2015-01-28 04:44:42 +00:00
..
ath_dfs/null	The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare	2013-10-26 17:58:36 +00:00
ath_hal	Add a new HAL capability - required to compile the updated AR9300	2015-01-28 04:02:56 +00:00
ath_rate	Cast everything to something longer than 32 bits so the sample mask	2015-01-28 04:44:42 +00:00
ah_osdep.c	Pull in r267961 and r267973 again. Fix for issues reported will follow.	2014-06-28 03:56:17 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	Remove ia64.	2014-07-07 00:27:09 +00:00
if_ath_alq.c	Support sending ATH_ALQ messages with no payload.	2013-05-13 21:17:27 +00:00
if_ath_alq.h	Add ALQ beacon debugging.	2013-05-13 21:18:00 +00:00
if_ath_beacon.c	Shut down RX before TX - in theory, this should make the chip less likely	2014-08-23 18:55:51 +00:00
if_ath_beacon.h	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_btcoex.c	Until there's a full MCI implementation - just implement a placeholder	2015-01-17 00:02:18 +00:00
if_ath_btcoex.h	Bring over the initial static bluetooth coexistence configuration	2013-06-07 09:02:02 +00:00
if_ath_debug.c	Pull in r267961 and r267973 again. Fix for issues reported will follow.	2014-06-28 03:56:17 +00:00
if_ath_debug.h	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_keycache.c	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_keycache.h
if_ath_led.c	Bring over some initial power save management support, reset path	2014-04-30 02:19:41 +00:00
if_ath_led.h
if_ath_lna_div.c	Add initial support for the AR9485 CUS198 / CUS230 variants.	2014-09-30 03:19:29 +00:00
if_ath_lna_div.h	Initial AR9485/AR933x 1x1 LNA diversity work.	2013-06-14 03:42:10 +00:00
if_ath_misc.h	Add tracking for self-generated frames when the VAP is in sleep state.	2014-05-02 00:48:09 +00:00
if_ath_pci_devlist.h	Add a missing file from the last commit.	2014-09-30 05:50:34 +00:00
if_ath_pci.c	Add initial support for the AR9485 CUS198 / CUS230 variants.	2014-09-30 03:19:29 +00:00
if_ath_rx_edma.c	Fix up the EDMA RX setup path to correctly initialise and reset the RX FIFO.	2014-09-20 01:22:17 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	Mechanically convert to if_inc_counter().	2014-09-18 20:47:39 +00:00
if_ath_rx.h	Fix the busdma logic to work with EDMA chipsets when using bounce	2013-04-04 08:21:56 +00:00
if_ath_spectral.c	The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare	2013-10-26 17:58:36 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Bump the valid GPIO range for rfkill up from 8 to 16.	2014-12-23 18:48:45 +00:00
if_ath_sysctl.h
if_ath_tdma.c	Add casts to have it compile on amd64 without complaining about	2014-05-07 19:07:45 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c	Quieten the RX/TX descriptor and FIFO setup debugging.	2014-05-05 08:00:50 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_ath_tx_ht.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_ath_tx.c	Mechanically convert to if_inc_counter().	2014-09-18 20:47:39 +00:00
if_ath_tx.h	Implement a separate hardware queue threshold for aggregate and non-aggr	2013-05-21 18:13:57 +00:00
if_ath.c	Check the right value correctly.	2015-01-16 01:52:26 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Implement my first cut at "correct" node power-save and	2013-05-15 18:33:05 +00:00
if_athrate.h	Update the rate series setup code to use the decisions already made in	2013-04-17 07:21:30 +00:00
if_athvar.h	Add initial support for the AR9485 CUS198 / CUS230 variants.	2014-09-30 03:19:29 +00:00