freebsd-dev/sys/dev/uart/uart_dev_i8251.c
Warner Losh af1af2d2cc Better stab at MD code for pc98. The 8251 stuff is a total lie
(ns8250 copied and s/ns8250/i8251/g), but there for linkage purposes.
Real code to follow, once I get past some boot issues on my pc98 boxes
with recent current.
2003-09-07 04:59:15 +00:00

727 lines
17 KiB
C

/*
* Copyright (c) 2003 Marcel Moolenaar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <machine/bus.h>
#include <dev/uart/uart.h>
#include <dev/uart/uart_cpu.h>
#include <dev/uart/uart_bus.h>
#include <dev/uart/uart_dev_i8251.h>
#include "uart_if.h"
#define DEFAULT_RCLK 1843200
/*
* Clear pending interrupts. THRE is cleared by reading IIR. Data
* that may have been received gets lost here.
*/
static void
i8251_clrint(struct uart_bas *bas)
{
uint8_t iir;
iir = uart_getreg(bas, REG_IIR);
while ((iir & IIR_NOPEND) == 0) {
iir &= IIR_IMASK;
if (iir == IIR_RLS)
(void)uart_getreg(bas, REG_LSR);
else if (iir == IIR_RXRDY || iir == IIR_RXTOUT)
(void)uart_getreg(bas, REG_DATA);
else if (iir == IIR_MLSC)
(void)uart_getreg(bas, REG_MSR);
uart_barrier(bas);
iir = uart_getreg(bas, REG_IIR);
}
}
static int
i8251_delay(struct uart_bas *bas)
{
int divisor;
u_char lcr;
lcr = uart_getreg(bas, REG_LCR);
uart_setreg(bas, REG_LCR, lcr | LCR_DLAB);
uart_barrier(bas);
divisor = uart_getdreg(bas, REG_DL);
uart_barrier(bas);
uart_setreg(bas, REG_LCR, lcr);
uart_barrier(bas);
/* 1/10th the time to transmit 1 character (estimate). */
return (16000000 * divisor / bas->rclk);
}
static int
i8251_divisor(int rclk, int baudrate)
{
int actual_baud, divisor;
int error;
if (baudrate == 0)
return (0);
divisor = (rclk / (baudrate << 3) + 1) >> 1;
if (divisor == 0 || divisor >= 65536)
return (0);
actual_baud = rclk / (divisor << 4);
/* 10 times error in percent: */
error = ((actual_baud - baudrate) * 2000 / baudrate + 1) >> 1;
/* 3.0% maximum error tolerance: */
if (error < -30 || error > 30)
return (0);
return (divisor);
}
static int
i8251_drain(struct uart_bas *bas, int what)
{
int delay, limit;
delay = i8251_delay(bas);
if (what & UART_DRAIN_TRANSMITTER) {
/*
* Pick an arbitrary high limit to avoid getting stuck in
* an infinite loop when the hardware is broken. Make the
* limit high enough to handle large FIFOs.
*/
limit = 10*1024;
while ((uart_getreg(bas, REG_LSR) & LSR_TEMT) == 0 && --limit)
DELAY(delay);
if (limit == 0) {
/* printf("i8251: transmitter appears stuck... "); */
return (EIO);
}
}
if (what & UART_DRAIN_RECEIVER) {
/*
* Pick an arbitrary high limit to avoid getting stuck in
* an infinite loop when the hardware is broken. Make the
* limit high enough to handle large FIFOs and integrated
* UARTs. The HP rx2600 for example has 3 UARTs on the
* management board that tend to get a lot of data send
* to it when the UART is first activated.
*/
limit=10*4096;
while ((uart_getreg(bas, REG_LSR) & LSR_RXRDY) && --limit) {
(void)uart_getreg(bas, REG_DATA);
uart_barrier(bas);
DELAY(delay << 2);
}
if (limit == 0) {
/* printf("i8251: receiver appears broken... "); */
return (EIO);
}
}
return (0);
}
/*
* We can only flush UARTs with FIFOs. UARTs without FIFOs should be
* drained. WARNING: this function clobbers the FIFO setting!
*/
static void
i8251_flush(struct uart_bas *bas, int what)
{
uint8_t fcr;
fcr = FCR_ENABLE;
if (what & UART_FLUSH_TRANSMITTER)
fcr |= FCR_XMT_RST;
if (what & UART_FLUSH_RECEIVER)
fcr |= FCR_RCV_RST;
uart_setreg(bas, REG_FCR, fcr);
uart_barrier(bas);
}
static int
i8251_param(struct uart_bas *bas, int baudrate, int databits, int stopbits,
int parity)
{
int divisor;
uint8_t lcr;
lcr = 0;
if (databits >= 8)
lcr |= LCR_8BITS;
else if (databits == 7)
lcr |= LCR_7BITS;
else if (databits == 6)
lcr |= LCR_6BITS;
else
lcr |= LCR_5BITS;
if (stopbits > 1)
lcr |= LCR_STOPB;
lcr |= parity << 3;
/* Set baudrate. */
if (baudrate > 0) {
uart_setreg(bas, REG_LCR, lcr | LCR_DLAB);
uart_barrier(bas);
divisor = i8251_divisor(bas->rclk, baudrate);
if (divisor == 0)
return (EINVAL);
uart_setdreg(bas, REG_DL, divisor);
uart_barrier(bas);
}
/* Set LCR and clear DLAB. */
uart_setreg(bas, REG_LCR, lcr);
uart_barrier(bas);
return (0);
}
/*
* Low-level UART interface.
*/
static int i8251_probe(struct uart_bas *bas);
static void i8251_init(struct uart_bas *bas, int, int, int, int);
static void i8251_term(struct uart_bas *bas);
static void i8251_putc(struct uart_bas *bas, int);
static int i8251_poll(struct uart_bas *bas);
static int i8251_getc(struct uart_bas *bas);
struct uart_ops uart_i8251_ops = {
.probe = i8251_probe,
.init = i8251_init,
.term = i8251_term,
.putc = i8251_putc,
.poll = i8251_poll,
.getc = i8251_getc,
};
static int
i8251_probe(struct uart_bas *bas)
{
u_char lcr, val;
/* Check known 0 bits that don't depend on DLAB. */
val = uart_getreg(bas, REG_IIR);
if (val & 0x30)
return (ENXIO);
val = uart_getreg(bas, REG_MCR);
if (val & 0xe0)
return (ENXIO);
lcr = uart_getreg(bas, REG_LCR);
uart_setreg(bas, REG_LCR, lcr & ~LCR_DLAB);
uart_barrier(bas);
/* Check known 0 bits that depend on !DLAB. */
val = uart_getreg(bas, REG_IER);
if (val & 0xf0)
goto fail;
uart_setreg(bas, REG_LCR, lcr);
uart_barrier(bas);
return (0);
fail:
uart_setreg(bas, REG_LCR, lcr);
uart_barrier(bas);
return (ENXIO);
}
static void
i8251_init(struct uart_bas *bas, int baudrate, int databits, int stopbits,
int parity)
{
if (bas->rclk == 0)
bas->rclk = DEFAULT_RCLK;
i8251_param(bas, baudrate, databits, stopbits, parity);
/* Disable all interrupt sources. */
uart_setreg(bas, REG_IER, 0);
uart_barrier(bas);
/* Disable the FIFO (if present). */
uart_setreg(bas, REG_FCR, 0);
uart_barrier(bas);
/* Set RTS & DTR. */
uart_setreg(bas, REG_MCR, MCR_IE | MCR_RTS | MCR_DTR);
uart_barrier(bas);
i8251_clrint(bas);
}
static void
i8251_term(struct uart_bas *bas)
{
/* Clear RTS & DTR. */
uart_setreg(bas, REG_MCR, MCR_IE);
uart_barrier(bas);
}
static void
i8251_putc(struct uart_bas *bas, int c)
{
int delay, limit;
/* 1/10th the time to transmit 1 character (estimate). */
delay = i8251_delay(bas);
limit = 20;
while ((uart_getreg(bas, REG_LSR) & LSR_THRE) == 0 && --limit)
DELAY(delay);
uart_setreg(bas, REG_DATA, c);
limit = 40;
while ((uart_getreg(bas, REG_LSR) & LSR_TEMT) == 0 && --limit)
DELAY(delay);
}
static int
i8251_poll(struct uart_bas *bas)
{
if (uart_getreg(bas, REG_LSR) & LSR_RXRDY)
return (uart_getreg(bas, REG_DATA));
return (-1);
}
static int
i8251_getc(struct uart_bas *bas)
{
int delay;
/* 1/10th the time to transmit 1 character (estimate). */
delay = i8251_delay(bas);
while ((uart_getreg(bas, REG_LSR) & LSR_RXRDY) == 0)
DELAY(delay);
return (uart_getreg(bas, REG_DATA));
}
/*
* High-level UART interface.
*/
struct i8251_softc {
struct uart_softc base;
uint8_t fcr;
uint8_t ier;
uint8_t mcr;
};
static int i8251_bus_attach(struct uart_softc *);
static int i8251_bus_detach(struct uart_softc *);
static int i8251_bus_flush(struct uart_softc *, int);
static int i8251_bus_getsig(struct uart_softc *);
static int i8251_bus_ioctl(struct uart_softc *, int, intptr_t);
static int i8251_bus_ipend(struct uart_softc *);
static int i8251_bus_param(struct uart_softc *, int, int, int, int);
static int i8251_bus_probe(struct uart_softc *);
static int i8251_bus_receive(struct uart_softc *);
static int i8251_bus_setsig(struct uart_softc *, int);
static int i8251_bus_transmit(struct uart_softc *);
static kobj_method_t i8251_methods[] = {
KOBJMETHOD(uart_attach, i8251_bus_attach),
KOBJMETHOD(uart_detach, i8251_bus_detach),
KOBJMETHOD(uart_flush, i8251_bus_flush),
KOBJMETHOD(uart_getsig, i8251_bus_getsig),
KOBJMETHOD(uart_ioctl, i8251_bus_ioctl),
KOBJMETHOD(uart_ipend, i8251_bus_ipend),
KOBJMETHOD(uart_param, i8251_bus_param),
KOBJMETHOD(uart_probe, i8251_bus_probe),
KOBJMETHOD(uart_receive, i8251_bus_receive),
KOBJMETHOD(uart_setsig, i8251_bus_setsig),
KOBJMETHOD(uart_transmit, i8251_bus_transmit),
{ 0, 0 }
};
struct uart_class uart_i8251_class = {
"i8251 class",
i8251_methods,
sizeof(struct i8251_softc),
.uc_range = 8,
.uc_rclk = DEFAULT_RCLK
};
#define SIGCHG(c, i, s, d) \
if (c) { \
i |= (i & s) ? s : s | d; \
} else { \
i = (i & s) ? (i & ~s) | d : i; \
}
static int
i8251_bus_attach(struct uart_softc *sc)
{
struct i8251_softc *i8251 = (struct i8251_softc*)sc;
struct uart_bas *bas;
bas = &sc->sc_bas;
i8251->mcr = uart_getreg(bas, REG_MCR);
i8251->fcr = FCR_ENABLE | FCR_RX_MEDH;
uart_setreg(bas, REG_FCR, i8251->fcr);
uart_barrier(bas);
i8251_bus_flush(sc, UART_FLUSH_RECEIVER|UART_FLUSH_TRANSMITTER);
if (i8251->mcr & MCR_DTR)
sc->sc_hwsig |= UART_SIG_DTR;
if (i8251->mcr & MCR_RTS)
sc->sc_hwsig |= UART_SIG_RTS;
i8251_bus_getsig(sc);
i8251_clrint(bas);
i8251->ier = IER_EMSC | IER_ERLS | IER_ERXRDY;
uart_setreg(bas, REG_IER, i8251->ier);
uart_barrier(bas);
return (0);
}
static int
i8251_bus_detach(struct uart_softc *sc)
{
struct uart_bas *bas;
bas = &sc->sc_bas;
uart_setreg(bas, REG_IER, 0);
uart_barrier(bas);
i8251_clrint(bas);
return (0);
}
static int
i8251_bus_flush(struct uart_softc *sc, int what)
{
struct i8251_softc *i8251 = (struct i8251_softc*)sc;
struct uart_bas *bas;
bas = &sc->sc_bas;
if (sc->sc_hasfifo) {
i8251_flush(bas, what);
uart_setreg(bas, REG_FCR, i8251->fcr);
uart_barrier(bas);
return (0);
}
return (i8251_drain(bas, what));
}
static int
i8251_bus_getsig(struct uart_softc *sc)
{
uint32_t new, old, sig;
uint8_t msr;
do {
old = sc->sc_hwsig;
sig = old;
msr = uart_getreg(&sc->sc_bas, REG_MSR);
SIGCHG(msr & MSR_DSR, sig, UART_SIG_DSR, UART_SIG_DDSR);
SIGCHG(msr & MSR_CTS, sig, UART_SIG_CTS, UART_SIG_DCTS);
SIGCHG(msr & MSR_DCD, sig, UART_SIG_DCD, UART_SIG_DDCD);
SIGCHG(msr & MSR_RI, sig, UART_SIG_RI, UART_SIG_DRI);
new = sig & ~UART_SIGMASK_DELTA;
} while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
return (sig);
}
static int
i8251_bus_ioctl(struct uart_softc *sc, int request, intptr_t data)
{
struct uart_bas *bas;
uint8_t lcr;
bas = &sc->sc_bas;
switch (request) {
case UART_IOCTL_BREAK:
lcr = uart_getreg(bas, REG_LCR);
if (data)
lcr |= LCR_SBREAK;
else
lcr &= ~LCR_SBREAK;
uart_setreg(bas, REG_LCR, lcr);
uart_barrier(bas);
break;
default:
return (EINVAL);
}
return (0);
}
static int
i8251_bus_ipend(struct uart_softc *sc)
{
struct uart_bas *bas;
int ipend;
uint8_t iir, lsr;
bas = &sc->sc_bas;
iir = uart_getreg(bas, REG_IIR);
if (iir & IIR_NOPEND)
return (0);
ipend = 0;
if (iir & IIR_RXRDY) {
lsr = uart_getreg(bas, REG_LSR);
if (lsr & LSR_OE)
ipend |= UART_IPEND_OVERRUN;
if (lsr & LSR_BI)
ipend |= UART_IPEND_BREAK;
if (lsr & LSR_RXRDY)
ipend |= UART_IPEND_RXREADY;
} else {
if (iir & IIR_TXRDY)
ipend |= UART_IPEND_TXIDLE;
else
ipend |= UART_IPEND_SIGCHG;
}
return ((sc->sc_leaving) ? 0 : ipend);
}
static int
i8251_bus_param(struct uart_softc *sc, int baudrate, int databits,
int stopbits, int parity)
{
struct uart_bas *bas;
bas = &sc->sc_bas;
return (i8251_param(bas, baudrate, databits, stopbits, parity));
}
static int
i8251_bus_probe(struct uart_softc *sc)
{
struct uart_bas *bas;
int count, delay, error, limit;
uint8_t mcr;
bas = &sc->sc_bas;
error = i8251_probe(bas);
if (error)
return (error);
mcr = MCR_IE;
if (sc->sc_sysdev == NULL) {
/* By using i8251_init() we also set DTR and RTS. */
i8251_init(bas, 9600, 8, 1, UART_PARITY_NONE);
} else
mcr |= MCR_DTR | MCR_RTS;
error = i8251_drain(bas, UART_DRAIN_TRANSMITTER);
if (error)
return (error);
/*
* Set loopback mode. This avoids having garbage on the wire and
* also allows us send and receive data. We set DTR and RTS to
* avoid the possibility that automatic flow-control prevents
* any data from being sent. We clear IE to avoid raising interrupts.
*/
uart_setreg(bas, REG_MCR, MCR_LOOPBACK | MCR_DTR | MCR_RTS);
uart_barrier(bas);
/*
* Enable FIFOs. And check that the UART has them. If not, we're
* done. Otherwise we set DMA mode with the highest trigger level
* so that we can determine the FIFO size. Since this is the first
* time we enable the FIFOs, we reset them.
*/
uart_setreg(bas, REG_FCR, FCR_ENABLE);
uart_barrier(bas);
sc->sc_hasfifo = (uart_getreg(bas, REG_IIR) & IIR_FIFO_MASK) ? 1 : 0;
if (!sc->sc_hasfifo) {
/*
* NS16450 or II8251. We don't bother to differentiate
* between them. They're too old to be interesting.
*/
uart_setreg(bas, REG_MCR, mcr);
uart_barrier(bas);
device_set_desc(sc->sc_dev, "8250 or 16450 or compatible");
return (0);
}
uart_setreg(bas, REG_FCR, FCR_ENABLE | FCR_DMA | FCR_RX_HIGH |
FCR_XMT_RST | FCR_RCV_RST);
uart_barrier(bas);
count = 0;
delay = i8251_delay(bas);
/* We have FIFOs. Drain the transmitter and receiver. */
error = i8251_drain(bas, UART_DRAIN_RECEIVER|UART_DRAIN_TRANSMITTER);
if (error) {
uart_setreg(bas, REG_MCR, mcr);
uart_setreg(bas, REG_FCR, 0);
uart_barrier(bas);
goto describe;
}
uart_setreg(bas, REG_IER, IER_ERXRDY);
uart_barrier(bas);
/*
* We should have a sufficiently clean "pipe" to determine the
* size of the FIFOs. We send as much characters as is reasonable
* and wait for the the RX interrupt to be asserted, counting the
* characters as we send them. Based on that count we know the
* FIFO size.
*/
while ((uart_getreg(bas, REG_IIR) & IIR_RXRDY) == 0 && count < 1030) {
uart_setreg(bas, REG_DATA, 0);
uart_barrier(bas);
count++;
limit = 30;
while ((uart_getreg(bas, REG_LSR) & LSR_TEMT) == 0 && --limit)
DELAY(delay);
if (limit == 0) {
uart_setreg(bas, REG_IER, 0);
uart_setreg(bas, REG_MCR, mcr);
uart_setreg(bas, REG_FCR, 0);
uart_barrier(bas);
count = 0;
goto describe;
}
}
uart_setreg(bas, REG_IER, 0);
uart_setreg(bas, REG_MCR, mcr);
/* Reset FIFOs. */
i8251_flush(bas, UART_FLUSH_RECEIVER|UART_FLUSH_TRANSMITTER);
describe:
if (count >= 14 && count < 16) {
sc->sc_rxfifosz = 16;
device_set_desc(sc->sc_dev, "16550 or compatible");
} else if (count >= 28 && count < 32) {
sc->sc_rxfifosz = 32;
device_set_desc(sc->sc_dev, "16650 or compatible");
} else if (count >= 56 && count < 64) {
sc->sc_rxfifosz = 64;
device_set_desc(sc->sc_dev, "16750 or compatible");
} else if (count >= 112 && count < 128) {
sc->sc_rxfifosz = 128;
device_set_desc(sc->sc_dev, "16950 or compatible");
} else {
sc->sc_rxfifosz = 1;
device_set_desc(sc->sc_dev,
"Non-standard i8251 class UART with FIFOs");
}
/*
* Force the Tx FIFO size to 16 bytes for now. We don't program the
* Tx trigger. Also, we assume that all data has been sent when the
* interrupt happens.
*/
sc->sc_txfifosz = 16;
return (0);
}
static int
i8251_bus_receive(struct uart_softc *sc)
{
struct uart_bas *bas;
int xc;
uint8_t lsr;
bas = &sc->sc_bas;
while (!uart_rx_full(sc)) {
lsr = uart_getreg(bas, REG_LSR);
if ((lsr & LSR_RXRDY) == 0)
break;
xc = uart_getreg(bas, REG_DATA);
if (lsr & LSR_FE)
xc |= UART_STAT_FRAMERR;
if (lsr & LSR_PE)
xc |= UART_STAT_PARERR;
uart_rx_put(sc, xc);
}
return (0);
}
static int
i8251_bus_setsig(struct uart_softc *sc, int sig)
{
struct i8251_softc *i8251 = (struct i8251_softc*)sc;
struct uart_bas *bas;
uint32_t new, old;
bas = &sc->sc_bas;
do {
old = sc->sc_hwsig;
new = old;
if (sig & UART_SIG_DDTR) {
SIGCHG(sig & UART_SIG_DTR, new, UART_SIG_DTR,
UART_SIG_DDTR);
}
if (sig & UART_SIG_DRTS) {
SIGCHG(sig & UART_SIG_RTS, new, UART_SIG_RTS,
UART_SIG_DRTS);
}
} while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
i8251->mcr &= ~(MCR_DTR|MCR_RTS);
if (new & UART_SIG_DTR)
i8251->mcr |= MCR_DTR;
if (new & UART_SIG_RTS)
i8251->mcr |= MCR_RTS;
uart_setreg(bas, REG_MCR, i8251->mcr);
uart_barrier(bas);
return (0);
}
static int
i8251_bus_transmit(struct uart_softc *sc)
{
struct i8251_softc *i8251 = (struct i8251_softc*)sc;
struct uart_bas *bas;
int i;
bas = &sc->sc_bas;
while ((uart_getreg(bas, REG_LSR) & LSR_THRE) == 0)
;
uart_setreg(bas, REG_IER, i8251->ier | IER_ETXRDY);
uart_barrier(bas);
for (i = 0; i < sc->sc_txdatasz; i++) {
uart_setreg(bas, REG_DATA, sc->sc_txbuf[i]);
uart_barrier(bas);
}
sc->sc_txbusy = 1;
return (0);
}