d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6b4959bf2f
freebsd-dev/sys/net80211/ieee80211_var.h
Sam Leffler a557c018f5 add ieee80211_find_channel_byieee to lookup a channel by ieee channel # 
Reviewed by:	thompsa
MFC after:	1 week
2007-11-23 05:57:20 +00:00

607 lines
26 KiB
C
Raw Blame History

/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2007 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_VAR_H_
#define _NET80211_IEEE80211_VAR_H_
/*
* Definitions for IEEE 802.11 drivers.
*/
#define IEEE80211_DEBUG
#undef IEEE80211_DEBUG_REFCNT /* node refcnt stuff */
/* NB: portability glue must go first */
#ifdef __NetBSD__
#include <net80211/ieee80211_netbsd.h>
#elif __FreeBSD__
#include <net80211/ieee80211_freebsd.h>
#elif __linux__
#include <net80211/ieee80211_linux.h>
#else
#error "No support for your operating system!"
#endif
#include <net80211/_ieee80211.h>
#include <net80211/ieee80211.h>
#include <net80211/ieee80211_crypto.h>
#include <net80211/ieee80211_ioctl.h> /* for ieee80211_stats */
#include <net80211/ieee80211_node.h>
#include <net80211/ieee80211_power.h>
#include <net80211/ieee80211_proto.h>
#include <net80211/ieee80211_scan.h>
#define IEEE80211_TXPOWER_MAX 100 /* .5 dbM (XXX units?) */
#define IEEE80211_TXPOWER_MIN 0 /* kill radio */
#define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */
#define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */
#define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */
#define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */
#define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */
#define IEEE80211_BGSCAN_INTVAL_DEFAULT (5*60) /* default bg scan intvl */
#define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */
#define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */
#define IEEE80211_SCAN_VALID_MIN 10 /* min scan valid time (secs) */
#define IEEE80211_SCAN_VALID_DEFAULT 60 /* default scan valid time */
#define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */
#define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */
#define IEEE80211_FIXED_RATE_NONE -1
#define IEEE80211_MCAST_RATE_DEFAULT (2*1) /* default mcast rate (1M) */
#define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX
#define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX
#define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024)
#define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000)
#define IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000))
struct ieee80211_aclator;
struct sysctl_ctx_list;
struct ieee80211com {
SLIST_ENTRY(ieee80211com) ic_next;
struct ifnet *ic_ifp; /* associated device */
ieee80211_com_lock_t ic_comlock; /* state update lock */
ieee80211_beacon_lock_t ic_beaconlock; /* beacon update lock */
struct ieee80211_stats ic_stats; /* statistics */
struct sysctl_ctx_list *ic_sysctl; /* dynamic sysctl context */
uint32_t ic_debug; /* debug msg flags */
int ic_vap; /* virtual AP index */
int ic_headroom; /* driver tx headroom needs */
enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */
enum ieee80211_opmode ic_opmode; /* operation mode */
struct ifmedia ic_media; /* interface media config */
uint8_t ic_myaddr[IEEE80211_ADDR_LEN];
uint32_t ic_flags; /* state flags */
uint32_t ic_flags_ext; /* extended state flags */
uint32_t ic_flags_ven; /* vendor state flags */
uint32_t ic_caps; /* capabilities */
uint32_t ic_htcaps; /* HT capabilities */
uint8_t ic_modecaps[2]; /* set of mode capabilities */
uint16_t ic_curmode; /* current mode */
struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
uint16_t ic_bintval; /* beacon interval */
uint16_t ic_lintval; /* listen interval */
uint16_t ic_holdover; /* PM hold over duration */
uint16_t ic_txpowlimit; /* global tx power limit */
int ic_ampdu_rxmax; /* A-MPDU rx limit (bytes) */
int ic_ampdu_density;/* A-MPDU density */
int ic_ampdu_limit; /* A-MPDU tx limit (bytes) */
int ic_amsdu_limit; /* A-MSDU tx limit (bytes) */
/*
* Channel state:
*
* ic_channels is the set of available channels for the device;
* it is setup by the driver
* ic_nchans is the number of valid entries in ic_channels
* ic_chan_avail is a bit vector of these channels used to check
* whether a channel is available w/o searching the channel table.
* ic_chan_active is a (potentially) constrained subset of
* ic_chan_avail that reflects any mode setting or user-specified
* limit on the set of channels to use/scan
* ic_curchan is the current channel the device is set to; it may
* be different from ic_bsschan when we are off-channel scanning
* or otherwise doing background work
* ic_bsschan is the channel selected for operation; it may
* be undefined (IEEE80211_CHAN_ANYC)
* ic_prevchan is a cached ``previous channel'' used to optimize
* lookups when switching back+forth between two channels
* (e.g. for dynamic turbo)
*/
int ic_nchans; /* # entries in ic_channels */
struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1];
uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES];
uint8_t ic_chan_active[IEEE80211_CHAN_BYTES];
uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES];
struct ieee80211_channel *ic_curchan; /* current channel */
struct ieee80211_channel *ic_bsschan; /* bss channel */
struct ieee80211_channel *ic_prevchan; /* previous channel */
int ic_countrycode; /* ISO country code */
uint16_t ic_regdomain; /* regulatory domain */
uint8_t ic_location; /* unknown, indoor, outdoor */
struct ieee80211_scan_state *ic_scan; /* scan state */
enum ieee80211_roamingmode ic_roaming; /* roaming mode */
int ic_lastdata; /* time of last data frame */
int ic_lastscan; /* time last scan completed */
int ic_des_nssid; /* # desired ssids */
struct ieee80211_scan_ssid ic_des_ssid[1];/* desired ssid table */
uint8_t ic_des_bssid[IEEE80211_ADDR_LEN];
struct ieee80211_channel *ic_des_chan; /* desired channel */
int ic_des_mode; /* desired phymode */
u_int ic_bgscanidle; /* bg scan idle threshold */
u_int ic_bgscanintvl; /* bg scan min interval */
u_int ic_scanvalid; /* scan cache valid threshold */
struct ieee80211_roam ic_roam; /* sta-mode roaming state */
struct ieee80211_node_table ic_sta; /* stations/neighbors */
struct ieee80211_wme_state ic_wme; /* WME/WMM state */
const struct ieee80211_aclator *ic_acl; /* aclator glue */
void *ic_as; /* private aclator state */
enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */
uint16_t ic_nonerpsta; /* # non-ERP stations */
uint16_t ic_longslotsta; /* # long slot time stations */
uint16_t ic_sta_assoc; /* stations associated */
uint16_t ic_ht_sta_assoc;/* HT stations associated */
uint16_t ic_ht40_sta_assoc;/* HT40 stations associated */
uint8_t ic_curhtprotmode;/* HTINFO bss state */
enum ieee80211_protmode ic_htprotmode; /* HT protection mode */
int ic_lastnonerp; /* last time non-ERP sta noted*/
int ic_lastnonht; /* last time non-HT sta noted */
struct ifqueue ic_mgtq;
enum ieee80211_state ic_state; /* 802.11 state */
struct callout ic_mgtsend; /* mgmt frame response timer */
uint32_t *ic_aid_bitmap; /* association id map */
uint16_t ic_max_aid;
uint16_t ic_ps_sta; /* stations in power save */
uint16_t ic_ps_pending; /* ps sta's w/ pending frames */
uint8_t *ic_tim_bitmap; /* power-save stations w/ data*/
uint16_t ic_tim_len; /* ic_tim_bitmap size (bytes) */
uint8_t ic_dtim_period; /* DTIM period */
uint8_t ic_dtim_count; /* DTIM count for last bcn */
struct bpf_if *ic_rawbpf; /* packet filter structure */
struct ieee80211_node *ic_bss; /* information for this node */
int ic_fixed_rate; /* 802.11 rate or -1 */
int ic_mcast_rate; /* rate for mcast frames */
uint16_t ic_rtsthreshold;
uint16_t ic_fragthreshold;
uint8_t ic_bmissthreshold;
uint8_t ic_bmiss_count; /* current beacon miss count */
int ic_bmiss_max; /* max bmiss before scan */
uint16_t ic_swbmiss_count;/* beacons in last period */
uint16_t ic_swbmiss_period;/* s/w bmiss period */
struct callout ic_swbmiss; /* s/w beacon miss timer */
uint16_t ic_txmin; /* min tx retry count */
uint16_t ic_txmax; /* max tx retry count */
uint16_t ic_txlifetime; /* tx lifetime */
struct callout ic_inact; /* inactivity timer wait */
void *ic_opt_ie; /* user-specified IE's */
uint16_t ic_opt_ie_len; /* length of ni_opt_ie */
int ic_inact_init; /* initial setting */
int ic_inact_auth; /* auth but not assoc setting */
int ic_inact_run; /* authorized setting */
int ic_inact_probe; /* inactive probe time */
/*
* Cipher state/configuration.
*/
struct ieee80211_crypto_state ic_crypto;
#define ic_nw_keys ic_crypto.cs_nw_keys /* XXX compatibility */
#define ic_def_txkey ic_crypto.cs_def_txkey /* XXX compatibility */
/*
* 802.1x glue. When an authenticator attaches it
* fills in this section. We assume that when ic_ec
* is setup that the methods are safe to call.
*/
const struct ieee80211_authenticator *ic_auth;
struct eapolcom *ic_ec;
/* send/recv 802.11 management frame */
int (*ic_send_mgmt)(struct ieee80211com *,
struct ieee80211_node *, int, int);
void (*ic_recv_mgmt)(struct ieee80211com *,
struct mbuf *, struct ieee80211_node *,
int, int, int, uint32_t);
/* send raw 802.11 frame */
int (*ic_raw_xmit)(struct ieee80211_node *,
struct mbuf *,
const struct ieee80211_bpf_params *);
/* reset device state after 802.11 parameter/state change */
int (*ic_reset)(struct ifnet *);
/* [schedule] beacon frame update */
void (*ic_update_beacon)(struct ieee80211com *, int);
/* update device state for 802.11 slot time change */
void (*ic_updateslot)(struct ifnet *);
/* new station association callback/notification */
void (*ic_newassoc)(struct ieee80211_node *, int);
/* node state management */
struct ieee80211_node *(*ic_node_alloc)(struct ieee80211_node_table*);
void (*ic_node_free)(struct ieee80211_node *);
void (*ic_node_cleanup)(struct ieee80211_node *);
int8_t (*ic_node_getrssi)(const struct ieee80211_node*);
void (*ic_node_getsignal)(const struct ieee80211_node*,
int8_t *, int8_t *);
/* scanning support */
void (*ic_scan_start)(struct ieee80211com *);
void (*ic_scan_end)(struct ieee80211com *);
void (*ic_set_channel)(struct ieee80211com *);
void (*ic_scan_curchan)(struct ieee80211com *,
unsigned long);
void (*ic_scan_mindwell)(struct ieee80211com *);
/* per-vap eventually... */
int (*ic_newstate)(struct ieee80211com *,
enum ieee80211_state, int);
void (*ic_set_tim)(struct ieee80211_node *, int);
/*
* 802.11n ADDBA support. A simple/generic implementation
* of A-MPDU tx aggregation is provided; the driver may
* override these methods to provide their own support.
* A-MPDU rx re-ordering happens automatically if the
* driver passes out-of-order frames to ieee80211_input
* from an assocated HT station.
*/
void (*ic_recv_action)(struct ieee80211_node *,
const uint8_t *frm, const uint8_t *efrm);
int (*ic_send_action)(struct ieee80211_node *,
int category, int action,
uint16_t args[4]);
/* start/stop doing A-MPDU tx aggregation for a station */
int (*ic_addba_request)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *,
int dialogtoken, int baparamset,
int batimeout);
int (*ic_addba_response)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *,
int status, int baparamset, int batimeout);
void (*ic_addba_stop)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *);
};
#define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0)
#define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN)
/* ic_flags */
/* NB: bits 0x4c available */
#define IEEE80211_F_TURBOP 0x00000001 /* CONF: ATH Turbo enabled*/
#define IEEE80211_F_COMP 0x00000002 /* CONF: ATH comp enabled */
#define IEEE80211_F_FF 0x00000004 /* CONF: ATH FF enabled */
#define IEEE80211_F_BURST 0x00000008 /* CONF: bursting enabled */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
#define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */
#define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */
#define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */
#define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */
#define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
#define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/
#define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */
#define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */
#define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */
#define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/
#define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */
#define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */
#define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */
#define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */
#define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */
#define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */
#define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/
#define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */
#define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */
#define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */
#define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */
#define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */
#define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */
#define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */
#define IEEE80211_F_DOTH 0x40000000 /* CONF: 11h enabled */
/* Atheros protocol-specific flags */
#define IEEE80211_F_ATHEROS \
(IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP)
/* Check if an Atheros capability was negotiated for use */
#define IEEE80211_ATH_CAP(ic, ni, bit) \
((ic)->ic_flags & (ni)->ni_ath_flags & (bit))
/* ic_flags_ext */
#define IEEE80211_FEXT_NONHT_PR 0x00000001 /* STATUS: non-HT sta present */
#define IEEE80211_FEXT_INACT 0x00000002 /* CONF: sta inact handling */
/* 0x00000006 reserved */
#define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: complete bgscan */
#define IEEE80211_FEXT_NONERP_PR 0x00000200 /* STATUS: non-ERP sta present*/
#define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */
#define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/
#define IEEE80211_FEXT_HT 0x00080000 /* CONF: HT supported */
#define IEEE80211_FEXT_AMPDU_TX 0x00100000 /* CONF: A-MPDU tx supported */
#define IEEE80211_FEXT_AMPDU_RX 0x00200000 /* CONF: A-MPDU tx supported */
#define IEEE80211_FEXT_AMSDU_TX 0x00400000 /* CONF: A-MSDU tx supported */
#define IEEE80211_FEXT_AMSDU_RX 0x00800000 /* CONF: A-MSDU tx supported */
#define IEEE80211_FEXT_USEHT40 0x01000000 /* CONF: 20/40 use enabled */
#define IEEE80211_FEXT_PUREN 0x02000000 /* CONF: 11n w/o legacy sta's */
#define IEEE80211_FEXT_SHORTGI20 0x04000000 /* CONF: short GI in HT20 */
#define IEEE80211_FEXT_SHORTGI40 0x08000000 /* CONF: short GI in HT40 */
#define IEEE80211_FEXT_HTCOMPAT 0x10000000 /* CONF: HT vendor OUI's */
/* ic_caps */
#define IEEE80211_C_WEP 0x00000001 /* CAPABILITY: WEP available */
#define IEEE80211_C_TKIP 0x00000002 /* CAPABILITY: TKIP available */
#define IEEE80211_C_AES 0x00000004 /* CAPABILITY: AES OCB avail */
#define IEEE80211_C_AES_CCM 0x00000008 /* CAPABILITY: AES CCM avail */
#define IEEE80211_C_CKIP 0x00000020 /* CAPABILITY: CKIP available */
#define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */
#define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/
#define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */
#define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */
#define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */
#define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */
#define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */
#define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */
#define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */
#define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */
#define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */
#define IEEE80211_C_TKIPMIC 0x00020000 /* CAPABILITY: TKIP MIC avail */
#define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */
#define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */
#define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/
#define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */
#define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */
#define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */
/* 0x10000000 reserved */
#define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */
#define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */
/* XXX protection/barker? */
#define IEEE80211_C_CRYPTO 0x0000002f /* CAPABILITY: crypto alg's */
/*
* ic_htcaps: HT-specific device/driver capabilities
*
* NB: the low 16-bits are the 802.11 definitions, the upper
* 16-bits are used to define s/w/driver capabilities.
*/
#define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */
#define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */
/* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */
#define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */
void ieee80211_ifattach(struct ieee80211com *);
void ieee80211_ifdetach(struct ieee80211com *);
const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic,
const struct ieee80211_channel *);
void ieee80211_announce(struct ieee80211com *);
void ieee80211_announce_channels(struct ieee80211com *);
void ieee80211_media_init(struct ieee80211com *,
ifm_change_cb_t, ifm_stat_cb_t);
struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]);
int ieee80211_media_change(struct ifnet *);
void ieee80211_media_status(struct ifnet *, struct ifmediareq *);
int ieee80211_ioctl(struct ieee80211com *, u_long, caddr_t);
int ieee80211_cfgget(struct ieee80211com *, u_long, caddr_t);
int ieee80211_cfgset(struct ieee80211com *, u_long, caddr_t);
int ieee80211_rate2media(struct ieee80211com *, int,
enum ieee80211_phymode);
int ieee80211_media2rate(int);
int ieee80211_mhz2ieee(u_int, u_int);
int ieee80211_chan2ieee(struct ieee80211com *,
const struct ieee80211_channel *);
u_int ieee80211_ieee2mhz(u_int, u_int);
struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *,
int freq, int flags);
struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *,
int ieee, int flags);
int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *);
/*
* Key update synchronization methods. XXX should not be visible.
*/
static __inline void
ieee80211_key_update_begin(struct ieee80211com *ic)
{
ic->ic_crypto.cs_key_update_begin(ic);
}
static __inline void
ieee80211_key_update_end(struct ieee80211com *ic)
{
ic->ic_crypto.cs_key_update_end(ic);
}
/*
* XXX these need to be here for IEEE80211_F_DATAPAD
*/
/*
* Return the space occupied by the 802.11 header and any
* padding required by the driver. This works for a
* management or data frame.
*/
static __inline int
ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_hdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(uint32_t));
return size;
}
/*
* Like ieee80211_hdrspace, but handles any type of frame.
*/
static __inline int
ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_anyhdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(uint32_t));
return size;
}
/*
* Notify a driver that beacon state has been updated.
*/
static __inline void
ieee80211_beacon_notify(struct ieee80211com *ic, int what)
{
if (ic->ic_state == IEEE80211_S_RUN)
ic->ic_update_beacon(ic, what);
}
/*
* Debugging facilities compiled in when IEEE80211_DEBUG is defined.
*
* The intent is that any problem in the net80211 layer can be
* diagnosed by inspecting the statistics (dumped by the wlanstats
* program) and/or the msgs generated by net80211. Messages are
* broken into functional classes and can be controlled with the
* wlandebug program. Certain of these msg groups are for facilities
* that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1X).
*/
#define IEEE80211_MSG_11N 0x80000000 /* 11n mode debug */
#define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */
#define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */
#define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */
#define IEEE80211_MSG_INPUT 0x08000000 /* input handling */
#define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */
#define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */
#define IEEE80211_MSG_NODE 0x01000000 /* node handling */
#define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */
#define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */
#define IEEE80211_MSG_SCAN 0x00200000 /* scanning */
#define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */
#define IEEE80211_MSG_STATE 0x00080000 /* state machine */
#define IEEE80211_MSG_POWER 0x00040000 /* power save handling */
#define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */
#define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */
#define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */
#define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */
#define IEEE80211_MSG_RADKEYS 0x00002000 /* dump 802.1x keys */
#define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */
#define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */
#define IEEE80211_MSG_WME 0x00000400 /* WME protocol */
#define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */
#define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */
#define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */
#define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */
#define IEEE80211_MSG_RATECTL 0x00000020 /* tx rate control */
#define IEEE80211_MSG_ACTION 0x00000010 /* action frame handling */
#define IEEE80211_MSG_WDS 0x00000008 /* WDS handling */
#define IEEE80211_MSG_IOCTL 0x00000004 /* ioctl handling */
#define IEEE80211_MSG_ANY 0xffffffff /* anything */
#ifdef IEEE80211_DEBUG
#define ieee80211_msg(_ic, _m) ((_ic)->ic_debug & (_m))
#define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note(_ic, _fmt, __VA_ARGS__); \
} while (0)
#define IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note_mac(_ic, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note_mac(_ic, _mac, _fmt, __VA_ARGS__); \
} while (0)
#define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) do { \
if (ieee80211_msg(_ic, _m)) \
ieee80211_note_frame(_ic, _wh, _fmt, __VA_ARGS__); \
} while (0)
void ieee80211_note(struct ieee80211com *ic, const char *fmt, ...);
void ieee80211_note_mac(struct ieee80211com *ic,
const uint8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...);
void ieee80211_note_frame(struct ieee80211com *ic,
const struct ieee80211_frame *wh, const char *fmt, ...);
#define ieee80211_msg_debug(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_DEBUG)
#define ieee80211_msg_dumppkts(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS)
#define ieee80211_msg_input(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_INPUT)
#define ieee80211_msg_radius(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_RADIUS)
#define ieee80211_msg_dumpradius(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_RADDUMP)
#define ieee80211_msg_dumpradkeys(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_RADKEYS)
#define ieee80211_msg_scan(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_SCAN)
#define ieee80211_msg_assoc(_ic) \
((_ic)->ic_debug & IEEE80211_MSG_ASSOC)
/*
* Emit a debug message about discarding a frame or information
* element. One format is for extracting the mac address from
* the frame header; the other is for when a header is not
* available or otherwise appropriate.
*/
#define IEEE80211_DISCARD(_ic, _m, _wh, _type, _fmt, ...) do { \
if ((_ic)->ic_debug & (_m)) \
ieee80211_discard_frame(_ic, _wh, _type, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_DISCARD_IE(_ic, _m, _wh, _type, _fmt, ...) do { \
if ((_ic)->ic_debug & (_m)) \
ieee80211_discard_ie(_ic, _wh, _type, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_DISCARD_MAC(_ic, _m, _mac, _type, _fmt, ...) do { \
if ((_ic)->ic_debug & (_m)) \
ieee80211_discard_mac(_ic, _mac, _type, _fmt, __VA_ARGS__);\
} while (0)
void ieee80211_discard_frame(struct ieee80211com *,
const struct ieee80211_frame *, const char *type, const char *fmt, ...);
void ieee80211_discard_ie(struct ieee80211com *,
const struct ieee80211_frame *, const char *type, const char *fmt, ...);
void ieee80211_discard_mac(struct ieee80211com *,
const uint8_t mac[IEEE80211_ADDR_LEN], const char *type,
const char *fmt, ...);
#else
#define IEEE80211_DPRINTF(_ic, _m, _fmt, ...)
#define IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...)
#define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...)
#define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...)
#define ieee80211_msg_dumppkts(_ic) 0
#define ieee80211_msg(_ic, _m) 0
#define IEEE80211_DISCARD(_ic, _m, _wh, _type, _fmt, ...)
#define IEEE80211_DISCARD_IE(_ic, _m, _wh, _type, _fmt, ...)
#define IEEE80211_DISCARD_MAC(_ic, _m, _mac, _type, _fmt, ...)
#endif
#endif /* _NET80211_IEEE80211_VAR_H_ */
Reference in New Issue View Git Blame Copy Permalink