Add a new private thread flag to indicate that the thread should not sleep if runningbufspace is too large. Set this flag on the bufdaemon and syncer threads so that they skip the waitrunningbufspace() call in bufwrite() rather than than checking the proc pointer vs. the known proc pointers for these two threads. A way of preventing these threads from being starved for I/O but still placing limits on their outstanding I/O would be desirable. Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from blocking on the runningbufspace check while holding snaplk. This prevents snaplk from being held for an arbitrarily long period of time if runningbufspace is high and greatly reduces the contention for snaplk. The disadvantage is that ffs_copyonwrite() can start a large amount of I/O if there are a large number of snapshots, which could cause a deadlock in other parts of the code. Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace before attempting to grab snaplk so that I/O requests waiting on snaplk are not counted in runningbufspace as being in-progress. Increment runningbufspace again before actually launching the original I/O request. Prior to the above two changes, the system could deadlock if enough I/O requests were blocked by snaplk to prevent runningbufspace from falling below lorunningspace and one of the bawrite() calls in ffs_copyonwrite() blocked in waitrunningbufspace() while holding snaplk. See <http://www.holm.cc/stress/log/cons143.html>
3797 lines
101 KiB
C
3797 lines
101 KiB
C
/*-
|
|
* Copyright (c) 2004 Poul-Henning Kamp
|
|
* Copyright (c) 1994,1997 John S. Dyson
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* this file contains a new buffer I/O scheme implementing a coherent
|
|
* VM object and buffer cache scheme. Pains have been taken to make
|
|
* sure that the performance degradation associated with schemes such
|
|
* as this is not realized.
|
|
*
|
|
* Author: John S. Dyson
|
|
* Significant help during the development and debugging phases
|
|
* had been provided by David Greenman, also of the FreeBSD core team.
|
|
*
|
|
* see man buf(9) for more info.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mount.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/resourcevar.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/vmmeter.h>
|
|
#include <sys/vnode.h>
|
|
#include <geom/geom.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/vm_kern.h>
|
|
#include <vm/vm_pageout.h>
|
|
#include <vm/vm_page.h>
|
|
#include <vm/vm_object.h>
|
|
#include <vm/vm_extern.h>
|
|
#include <vm/vm_map.h>
|
|
#include "opt_directio.h"
|
|
#include "opt_swap.h"
|
|
|
|
static MALLOC_DEFINE(M_BIOBUF, "BIO buffer", "BIO buffer");
|
|
|
|
struct bio_ops bioops; /* I/O operation notification */
|
|
|
|
struct buf_ops buf_ops_bio = {
|
|
.bop_name = "buf_ops_bio",
|
|
.bop_write = bufwrite,
|
|
.bop_strategy = bufstrategy,
|
|
.bop_sync = bufsync,
|
|
};
|
|
|
|
/*
|
|
* XXX buf is global because kern_shutdown.c and ffs_checkoverlap has
|
|
* carnal knowledge of buffers. This knowledge should be moved to vfs_bio.c.
|
|
*/
|
|
struct buf *buf; /* buffer header pool */
|
|
|
|
static struct proc *bufdaemonproc;
|
|
|
|
static int inmem(struct vnode *vp, daddr_t blkno);
|
|
static void vm_hold_free_pages(struct buf *bp, vm_offset_t from,
|
|
vm_offset_t to);
|
|
static void vm_hold_load_pages(struct buf *bp, vm_offset_t from,
|
|
vm_offset_t to);
|
|
static void vfs_page_set_valid(struct buf *bp, vm_ooffset_t off,
|
|
int pageno, vm_page_t m);
|
|
static void vfs_clean_pages(struct buf *bp);
|
|
static void vfs_setdirty(struct buf *bp);
|
|
static void vfs_vmio_release(struct buf *bp);
|
|
static int vfs_bio_clcheck(struct vnode *vp, int size,
|
|
daddr_t lblkno, daddr_t blkno);
|
|
static int flushbufqueues(int flushdeps);
|
|
static void buf_daemon(void);
|
|
static void bremfreel(struct buf *bp);
|
|
|
|
int vmiodirenable = TRUE;
|
|
SYSCTL_INT(_vfs, OID_AUTO, vmiodirenable, CTLFLAG_RW, &vmiodirenable, 0,
|
|
"Use the VM system for directory writes");
|
|
int runningbufspace;
|
|
SYSCTL_INT(_vfs, OID_AUTO, runningbufspace, CTLFLAG_RD, &runningbufspace, 0,
|
|
"Amount of presently outstanding async buffer io");
|
|
static int bufspace;
|
|
SYSCTL_INT(_vfs, OID_AUTO, bufspace, CTLFLAG_RD, &bufspace, 0,
|
|
"KVA memory used for bufs");
|
|
static int maxbufspace;
|
|
SYSCTL_INT(_vfs, OID_AUTO, maxbufspace, CTLFLAG_RD, &maxbufspace, 0,
|
|
"Maximum allowed value of bufspace (including buf_daemon)");
|
|
static int bufmallocspace;
|
|
SYSCTL_INT(_vfs, OID_AUTO, bufmallocspace, CTLFLAG_RD, &bufmallocspace, 0,
|
|
"Amount of malloced memory for buffers");
|
|
static int maxbufmallocspace;
|
|
SYSCTL_INT(_vfs, OID_AUTO, maxmallocbufspace, CTLFLAG_RW, &maxbufmallocspace, 0,
|
|
"Maximum amount of malloced memory for buffers");
|
|
static int lobufspace;
|
|
SYSCTL_INT(_vfs, OID_AUTO, lobufspace, CTLFLAG_RD, &lobufspace, 0,
|
|
"Minimum amount of buffers we want to have");
|
|
int hibufspace;
|
|
SYSCTL_INT(_vfs, OID_AUTO, hibufspace, CTLFLAG_RD, &hibufspace, 0,
|
|
"Maximum allowed value of bufspace (excluding buf_daemon)");
|
|
static int bufreusecnt;
|
|
SYSCTL_INT(_vfs, OID_AUTO, bufreusecnt, CTLFLAG_RW, &bufreusecnt, 0,
|
|
"Number of times we have reused a buffer");
|
|
static int buffreekvacnt;
|
|
SYSCTL_INT(_vfs, OID_AUTO, buffreekvacnt, CTLFLAG_RW, &buffreekvacnt, 0,
|
|
"Number of times we have freed the KVA space from some buffer");
|
|
static int bufdefragcnt;
|
|
SYSCTL_INT(_vfs, OID_AUTO, bufdefragcnt, CTLFLAG_RW, &bufdefragcnt, 0,
|
|
"Number of times we have had to repeat buffer allocation to defragment");
|
|
static int lorunningspace;
|
|
SYSCTL_INT(_vfs, OID_AUTO, lorunningspace, CTLFLAG_RW, &lorunningspace, 0,
|
|
"Minimum preferred space used for in-progress I/O");
|
|
static int hirunningspace;
|
|
SYSCTL_INT(_vfs, OID_AUTO, hirunningspace, CTLFLAG_RW, &hirunningspace, 0,
|
|
"Maximum amount of space to use for in-progress I/O");
|
|
static int dirtybufferflushes;
|
|
SYSCTL_INT(_vfs, OID_AUTO, dirtybufferflushes, CTLFLAG_RW, &dirtybufferflushes,
|
|
0, "Number of bdwrite to bawrite conversions to limit dirty buffers");
|
|
static int altbufferflushes;
|
|
SYSCTL_INT(_vfs, OID_AUTO, altbufferflushes, CTLFLAG_RW, &altbufferflushes,
|
|
0, "Number of fsync flushes to limit dirty buffers");
|
|
static int recursiveflushes;
|
|
SYSCTL_INT(_vfs, OID_AUTO, recursiveflushes, CTLFLAG_RW, &recursiveflushes,
|
|
0, "Number of flushes skipped due to being recursive");
|
|
static int numdirtybuffers;
|
|
SYSCTL_INT(_vfs, OID_AUTO, numdirtybuffers, CTLFLAG_RD, &numdirtybuffers, 0,
|
|
"Number of buffers that are dirty (has unwritten changes) at the moment");
|
|
static int lodirtybuffers;
|
|
SYSCTL_INT(_vfs, OID_AUTO, lodirtybuffers, CTLFLAG_RW, &lodirtybuffers, 0,
|
|
"How many buffers we want to have free before bufdaemon can sleep");
|
|
static int hidirtybuffers;
|
|
SYSCTL_INT(_vfs, OID_AUTO, hidirtybuffers, CTLFLAG_RW, &hidirtybuffers, 0,
|
|
"When the number of dirty buffers is considered severe");
|
|
static int dirtybufthresh;
|
|
SYSCTL_INT(_vfs, OID_AUTO, dirtybufthresh, CTLFLAG_RW, &dirtybufthresh,
|
|
0, "Number of bdwrite to bawrite conversions to clear dirty buffers");
|
|
static int numfreebuffers;
|
|
SYSCTL_INT(_vfs, OID_AUTO, numfreebuffers, CTLFLAG_RD, &numfreebuffers, 0,
|
|
"Number of free buffers");
|
|
static int lofreebuffers;
|
|
SYSCTL_INT(_vfs, OID_AUTO, lofreebuffers, CTLFLAG_RW, &lofreebuffers, 0,
|
|
"XXX Unused");
|
|
static int hifreebuffers;
|
|
SYSCTL_INT(_vfs, OID_AUTO, hifreebuffers, CTLFLAG_RW, &hifreebuffers, 0,
|
|
"XXX Complicatedly unused");
|
|
static int getnewbufcalls;
|
|
SYSCTL_INT(_vfs, OID_AUTO, getnewbufcalls, CTLFLAG_RW, &getnewbufcalls, 0,
|
|
"Number of calls to getnewbuf");
|
|
static int getnewbufrestarts;
|
|
SYSCTL_INT(_vfs, OID_AUTO, getnewbufrestarts, CTLFLAG_RW, &getnewbufrestarts, 0,
|
|
"Number of times getnewbuf has had to restart a buffer aquisition");
|
|
|
|
/*
|
|
* Wakeup point for bufdaemon, as well as indicator of whether it is already
|
|
* active. Set to 1 when the bufdaemon is already "on" the queue, 0 when it
|
|
* is idling.
|
|
*/
|
|
static int bd_request;
|
|
|
|
/*
|
|
* This lock synchronizes access to bd_request.
|
|
*/
|
|
static struct mtx bdlock;
|
|
|
|
/*
|
|
* bogus page -- for I/O to/from partially complete buffers
|
|
* this is a temporary solution to the problem, but it is not
|
|
* really that bad. it would be better to split the buffer
|
|
* for input in the case of buffers partially already in memory,
|
|
* but the code is intricate enough already.
|
|
*/
|
|
vm_page_t bogus_page;
|
|
|
|
/*
|
|
* Synchronization (sleep/wakeup) variable for active buffer space requests.
|
|
* Set when wait starts, cleared prior to wakeup().
|
|
* Used in runningbufwakeup() and waitrunningbufspace().
|
|
*/
|
|
static int runningbufreq;
|
|
|
|
/*
|
|
* This lock protects the runningbufreq and synchronizes runningbufwakeup and
|
|
* waitrunningbufspace().
|
|
*/
|
|
static struct mtx rbreqlock;
|
|
|
|
/*
|
|
* Synchronization (sleep/wakeup) variable for buffer requests.
|
|
* Can contain the VFS_BIO_NEED flags defined below; setting/clearing is done
|
|
* by and/or.
|
|
* Used in numdirtywakeup(), bufspacewakeup(), bufcountwakeup(), bwillwrite(),
|
|
* getnewbuf(), and getblk().
|
|
*/
|
|
static int needsbuffer;
|
|
|
|
/*
|
|
* Lock that protects needsbuffer and the sleeps/wakeups surrounding it.
|
|
*/
|
|
static struct mtx nblock;
|
|
|
|
/*
|
|
* Lock that protects against bwait()/bdone()/B_DONE races.
|
|
*/
|
|
|
|
static struct mtx bdonelock;
|
|
|
|
/*
|
|
* Definitions for the buffer free lists.
|
|
*/
|
|
#define BUFFER_QUEUES 5 /* number of free buffer queues */
|
|
|
|
#define QUEUE_NONE 0 /* on no queue */
|
|
#define QUEUE_CLEAN 1 /* non-B_DELWRI buffers */
|
|
#define QUEUE_DIRTY 2 /* B_DELWRI buffers */
|
|
#define QUEUE_EMPTYKVA 3 /* empty buffer headers w/KVA assignment */
|
|
#define QUEUE_EMPTY 4 /* empty buffer headers */
|
|
|
|
/* Queues for free buffers with various properties */
|
|
static TAILQ_HEAD(bqueues, buf) bufqueues[BUFFER_QUEUES] = { { 0 } };
|
|
|
|
/* Lock for the bufqueues */
|
|
static struct mtx bqlock;
|
|
|
|
/*
|
|
* Single global constant for BUF_WMESG, to avoid getting multiple references.
|
|
* buf_wmesg is referred from macros.
|
|
*/
|
|
const char *buf_wmesg = BUF_WMESG;
|
|
|
|
#define VFS_BIO_NEED_ANY 0x01 /* any freeable buffer */
|
|
#define VFS_BIO_NEED_DIRTYFLUSH 0x02 /* waiting for dirty buffer flush */
|
|
#define VFS_BIO_NEED_FREE 0x04 /* wait for free bufs, hi hysteresis */
|
|
#define VFS_BIO_NEED_BUFSPACE 0x08 /* wait for buf space, lo hysteresis */
|
|
|
|
#ifdef DIRECTIO
|
|
extern void ffs_rawread_setup(void);
|
|
#endif /* DIRECTIO */
|
|
/*
|
|
* numdirtywakeup:
|
|
*
|
|
* If someone is blocked due to there being too many dirty buffers,
|
|
* and numdirtybuffers is now reasonable, wake them up.
|
|
*/
|
|
|
|
static __inline void
|
|
numdirtywakeup(int level)
|
|
{
|
|
|
|
if (numdirtybuffers <= level) {
|
|
mtx_lock(&nblock);
|
|
if (needsbuffer & VFS_BIO_NEED_DIRTYFLUSH) {
|
|
needsbuffer &= ~VFS_BIO_NEED_DIRTYFLUSH;
|
|
wakeup(&needsbuffer);
|
|
}
|
|
mtx_unlock(&nblock);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* bufspacewakeup:
|
|
*
|
|
* Called when buffer space is potentially available for recovery.
|
|
* getnewbuf() will block on this flag when it is unable to free
|
|
* sufficient buffer space. Buffer space becomes recoverable when
|
|
* bp's get placed back in the queues.
|
|
*/
|
|
|
|
static __inline void
|
|
bufspacewakeup(void)
|
|
{
|
|
|
|
/*
|
|
* If someone is waiting for BUF space, wake them up. Even
|
|
* though we haven't freed the kva space yet, the waiting
|
|
* process will be able to now.
|
|
*/
|
|
mtx_lock(&nblock);
|
|
if (needsbuffer & VFS_BIO_NEED_BUFSPACE) {
|
|
needsbuffer &= ~VFS_BIO_NEED_BUFSPACE;
|
|
wakeup(&needsbuffer);
|
|
}
|
|
mtx_unlock(&nblock);
|
|
}
|
|
|
|
/*
|
|
* runningbufwakeup() - in-progress I/O accounting.
|
|
*
|
|
*/
|
|
void
|
|
runningbufwakeup(struct buf *bp)
|
|
{
|
|
|
|
if (bp->b_runningbufspace) {
|
|
atomic_subtract_int(&runningbufspace, bp->b_runningbufspace);
|
|
bp->b_runningbufspace = 0;
|
|
mtx_lock(&rbreqlock);
|
|
if (runningbufreq && runningbufspace <= lorunningspace) {
|
|
runningbufreq = 0;
|
|
wakeup(&runningbufreq);
|
|
}
|
|
mtx_unlock(&rbreqlock);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* bufcountwakeup:
|
|
*
|
|
* Called when a buffer has been added to one of the free queues to
|
|
* account for the buffer and to wakeup anyone waiting for free buffers.
|
|
* This typically occurs when large amounts of metadata are being handled
|
|
* by the buffer cache ( else buffer space runs out first, usually ).
|
|
*/
|
|
|
|
static __inline void
|
|
bufcountwakeup(void)
|
|
{
|
|
|
|
atomic_add_int(&numfreebuffers, 1);
|
|
mtx_lock(&nblock);
|
|
if (needsbuffer) {
|
|
needsbuffer &= ~VFS_BIO_NEED_ANY;
|
|
if (numfreebuffers >= hifreebuffers)
|
|
needsbuffer &= ~VFS_BIO_NEED_FREE;
|
|
wakeup(&needsbuffer);
|
|
}
|
|
mtx_unlock(&nblock);
|
|
}
|
|
|
|
/*
|
|
* waitrunningbufspace()
|
|
*
|
|
* runningbufspace is a measure of the amount of I/O currently
|
|
* running. This routine is used in async-write situations to
|
|
* prevent creating huge backups of pending writes to a device.
|
|
* Only asynchronous writes are governed by this function.
|
|
*
|
|
* Reads will adjust runningbufspace, but will not block based on it.
|
|
* The read load has a side effect of reducing the allowed write load.
|
|
*
|
|
* This does NOT turn an async write into a sync write. It waits
|
|
* for earlier writes to complete and generally returns before the
|
|
* caller's write has reached the device.
|
|
*/
|
|
static __inline void
|
|
waitrunningbufspace(void)
|
|
{
|
|
|
|
mtx_lock(&rbreqlock);
|
|
while (runningbufspace > hirunningspace) {
|
|
++runningbufreq;
|
|
msleep(&runningbufreq, &rbreqlock, PVM, "wdrain", 0);
|
|
}
|
|
mtx_unlock(&rbreqlock);
|
|
}
|
|
|
|
|
|
/*
|
|
* vfs_buf_test_cache:
|
|
*
|
|
* Called when a buffer is extended. This function clears the B_CACHE
|
|
* bit if the newly extended portion of the buffer does not contain
|
|
* valid data.
|
|
*/
|
|
static __inline
|
|
void
|
|
vfs_buf_test_cache(struct buf *bp,
|
|
vm_ooffset_t foff, vm_offset_t off, vm_offset_t size,
|
|
vm_page_t m)
|
|
{
|
|
|
|
VM_OBJECT_LOCK_ASSERT(m->object, MA_OWNED);
|
|
if (bp->b_flags & B_CACHE) {
|
|
int base = (foff + off) & PAGE_MASK;
|
|
if (vm_page_is_valid(m, base, size) == 0)
|
|
bp->b_flags &= ~B_CACHE;
|
|
}
|
|
}
|
|
|
|
/* Wake up the buffer deamon if necessary */
|
|
static __inline
|
|
void
|
|
bd_wakeup(int dirtybuflevel)
|
|
{
|
|
|
|
mtx_lock(&bdlock);
|
|
if (bd_request == 0 && numdirtybuffers >= dirtybuflevel) {
|
|
bd_request = 1;
|
|
wakeup(&bd_request);
|
|
}
|
|
mtx_unlock(&bdlock);
|
|
}
|
|
|
|
/*
|
|
* bd_speedup - speedup the buffer cache flushing code
|
|
*/
|
|
|
|
static __inline
|
|
void
|
|
bd_speedup(void)
|
|
{
|
|
|
|
bd_wakeup(1);
|
|
}
|
|
|
|
/*
|
|
* Calculating buffer cache scaling values and reserve space for buffer
|
|
* headers. This is called during low level kernel initialization and
|
|
* may be called more then once. We CANNOT write to the memory area
|
|
* being reserved at this time.
|
|
*/
|
|
caddr_t
|
|
kern_vfs_bio_buffer_alloc(caddr_t v, long physmem_est)
|
|
{
|
|
|
|
/*
|
|
* physmem_est is in pages. Convert it to kilobytes (assumes
|
|
* PAGE_SIZE is >= 1K)
|
|
*/
|
|
physmem_est = physmem_est * (PAGE_SIZE / 1024);
|
|
|
|
/*
|
|
* The nominal buffer size (and minimum KVA allocation) is BKVASIZE.
|
|
* For the first 64MB of ram nominally allocate sufficient buffers to
|
|
* cover 1/4 of our ram. Beyond the first 64MB allocate additional
|
|
* buffers to cover 1/20 of our ram over 64MB. When auto-sizing
|
|
* the buffer cache we limit the eventual kva reservation to
|
|
* maxbcache bytes.
|
|
*
|
|
* factor represents the 1/4 x ram conversion.
|
|
*/
|
|
if (nbuf == 0) {
|
|
int factor = 4 * BKVASIZE / 1024;
|
|
|
|
nbuf = 50;
|
|
if (physmem_est > 4096)
|
|
nbuf += min((physmem_est - 4096) / factor,
|
|
65536 / factor);
|
|
if (physmem_est > 65536)
|
|
nbuf += (physmem_est - 65536) * 2 / (factor * 5);
|
|
|
|
if (maxbcache && nbuf > maxbcache / BKVASIZE)
|
|
nbuf = maxbcache / BKVASIZE;
|
|
}
|
|
|
|
#if 0
|
|
/*
|
|
* Do not allow the buffer_map to be more then 1/2 the size of the
|
|
* kernel_map.
|
|
*/
|
|
if (nbuf > (kernel_map->max_offset - kernel_map->min_offset) /
|
|
(BKVASIZE * 2)) {
|
|
nbuf = (kernel_map->max_offset - kernel_map->min_offset) /
|
|
(BKVASIZE * 2);
|
|
printf("Warning: nbufs capped at %d\n", nbuf);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* swbufs are used as temporary holders for I/O, such as paging I/O.
|
|
* We have no less then 16 and no more then 256.
|
|
*/
|
|
nswbuf = max(min(nbuf/4, 256), 16);
|
|
#ifdef NSWBUF_MIN
|
|
if (nswbuf < NSWBUF_MIN)
|
|
nswbuf = NSWBUF_MIN;
|
|
#endif
|
|
#ifdef DIRECTIO
|
|
ffs_rawread_setup();
|
|
#endif
|
|
|
|
/*
|
|
* Reserve space for the buffer cache buffers
|
|
*/
|
|
swbuf = (void *)v;
|
|
v = (caddr_t)(swbuf + nswbuf);
|
|
buf = (void *)v;
|
|
v = (caddr_t)(buf + nbuf);
|
|
|
|
return(v);
|
|
}
|
|
|
|
/* Initialize the buffer subsystem. Called before use of any buffers. */
|
|
void
|
|
bufinit(void)
|
|
{
|
|
struct buf *bp;
|
|
int i;
|
|
|
|
mtx_init(&bqlock, "buf queue lock", NULL, MTX_DEF);
|
|
mtx_init(&rbreqlock, "runningbufspace lock", NULL, MTX_DEF);
|
|
mtx_init(&nblock, "needsbuffer lock", NULL, MTX_DEF);
|
|
mtx_init(&bdlock, "buffer daemon lock", NULL, MTX_DEF);
|
|
mtx_init(&bdonelock, "bdone lock", NULL, MTX_DEF);
|
|
|
|
/* next, make a null set of free lists */
|
|
for (i = 0; i < BUFFER_QUEUES; i++)
|
|
TAILQ_INIT(&bufqueues[i]);
|
|
|
|
/* finally, initialize each buffer header and stick on empty q */
|
|
for (i = 0; i < nbuf; i++) {
|
|
bp = &buf[i];
|
|
bzero(bp, sizeof *bp);
|
|
bp->b_flags = B_INVAL; /* we're just an empty header */
|
|
bp->b_rcred = NOCRED;
|
|
bp->b_wcred = NOCRED;
|
|
bp->b_qindex = QUEUE_EMPTY;
|
|
bp->b_vflags = 0;
|
|
bp->b_xflags = 0;
|
|
LIST_INIT(&bp->b_dep);
|
|
BUF_LOCKINIT(bp);
|
|
TAILQ_INSERT_TAIL(&bufqueues[QUEUE_EMPTY], bp, b_freelist);
|
|
}
|
|
|
|
/*
|
|
* maxbufspace is the absolute maximum amount of buffer space we are
|
|
* allowed to reserve in KVM and in real terms. The absolute maximum
|
|
* is nominally used by buf_daemon. hibufspace is the nominal maximum
|
|
* used by most other processes. The differential is required to
|
|
* ensure that buf_daemon is able to run when other processes might
|
|
* be blocked waiting for buffer space.
|
|
*
|
|
* maxbufspace is based on BKVASIZE. Allocating buffers larger then
|
|
* this may result in KVM fragmentation which is not handled optimally
|
|
* by the system.
|
|
*/
|
|
maxbufspace = nbuf * BKVASIZE;
|
|
hibufspace = imax(3 * maxbufspace / 4, maxbufspace - MAXBSIZE * 10);
|
|
lobufspace = hibufspace - MAXBSIZE;
|
|
|
|
lorunningspace = 512 * 1024;
|
|
hirunningspace = 1024 * 1024;
|
|
|
|
/*
|
|
* Limit the amount of malloc memory since it is wired permanently into
|
|
* the kernel space. Even though this is accounted for in the buffer
|
|
* allocation, we don't want the malloced region to grow uncontrolled.
|
|
* The malloc scheme improves memory utilization significantly on average
|
|
* (small) directories.
|
|
*/
|
|
maxbufmallocspace = hibufspace / 20;
|
|
|
|
/*
|
|
* Reduce the chance of a deadlock occuring by limiting the number
|
|
* of delayed-write dirty buffers we allow to stack up.
|
|
*/
|
|
hidirtybuffers = nbuf / 4 + 20;
|
|
dirtybufthresh = hidirtybuffers * 9 / 10;
|
|
numdirtybuffers = 0;
|
|
/*
|
|
* To support extreme low-memory systems, make sure hidirtybuffers cannot
|
|
* eat up all available buffer space. This occurs when our minimum cannot
|
|
* be met. We try to size hidirtybuffers to 3/4 our buffer space assuming
|
|
* BKVASIZE'd (8K) buffers.
|
|
*/
|
|
while (hidirtybuffers * BKVASIZE > 3 * hibufspace / 4) {
|
|
hidirtybuffers >>= 1;
|
|
}
|
|
lodirtybuffers = hidirtybuffers / 2;
|
|
|
|
/*
|
|
* Try to keep the number of free buffers in the specified range,
|
|
* and give special processes (e.g. like buf_daemon) access to an
|
|
* emergency reserve.
|
|
*/
|
|
lofreebuffers = nbuf / 18 + 5;
|
|
hifreebuffers = 2 * lofreebuffers;
|
|
numfreebuffers = nbuf;
|
|
|
|
/*
|
|
* Maximum number of async ops initiated per buf_daemon loop. This is
|
|
* somewhat of a hack at the moment, we really need to limit ourselves
|
|
* based on the number of bytes of I/O in-transit that were initiated
|
|
* from buf_daemon.
|
|
*/
|
|
|
|
bogus_page = vm_page_alloc(NULL, 0, VM_ALLOC_NOOBJ |
|
|
VM_ALLOC_NORMAL | VM_ALLOC_WIRED);
|
|
}
|
|
|
|
/*
|
|
* bfreekva() - free the kva allocation for a buffer.
|
|
*
|
|
* Since this call frees up buffer space, we call bufspacewakeup().
|
|
*/
|
|
static void
|
|
bfreekva(struct buf *bp)
|
|
{
|
|
|
|
if (bp->b_kvasize) {
|
|
atomic_add_int(&buffreekvacnt, 1);
|
|
atomic_subtract_int(&bufspace, bp->b_kvasize);
|
|
vm_map_lock(buffer_map);
|
|
vm_map_delete(buffer_map,
|
|
(vm_offset_t) bp->b_kvabase,
|
|
(vm_offset_t) bp->b_kvabase + bp->b_kvasize
|
|
);
|
|
vm_map_unlock(buffer_map);
|
|
bp->b_kvasize = 0;
|
|
bufspacewakeup();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* bremfree:
|
|
*
|
|
* Mark the buffer for removal from the appropriate free list in brelse.
|
|
*
|
|
*/
|
|
void
|
|
bremfree(struct buf *bp)
|
|
{
|
|
|
|
CTR3(KTR_BUF, "bremfree(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
|
|
KASSERT(BUF_REFCNT(bp), ("bremfree: buf must be locked."));
|
|
KASSERT((bp->b_flags & B_REMFREE) == 0,
|
|
("bremfree: buffer %p already marked for delayed removal.", bp));
|
|
KASSERT(bp->b_qindex != QUEUE_NONE,
|
|
("bremfree: buffer %p not on a queue.", bp));
|
|
|
|
bp->b_flags |= B_REMFREE;
|
|
/* Fixup numfreebuffers count. */
|
|
if ((bp->b_flags & B_INVAL) || (bp->b_flags & B_DELWRI) == 0)
|
|
atomic_subtract_int(&numfreebuffers, 1);
|
|
}
|
|
|
|
/*
|
|
* bremfreef:
|
|
*
|
|
* Force an immediate removal from a free list. Used only in nfs when
|
|
* it abuses the b_freelist pointer.
|
|
*/
|
|
void
|
|
bremfreef(struct buf *bp)
|
|
{
|
|
mtx_lock(&bqlock);
|
|
bremfreel(bp);
|
|
mtx_unlock(&bqlock);
|
|
}
|
|
|
|
/*
|
|
* bremfreel:
|
|
*
|
|
* Removes a buffer from the free list, must be called with the
|
|
* bqlock held.
|
|
*/
|
|
static void
|
|
bremfreel(struct buf *bp)
|
|
{
|
|
CTR3(KTR_BUF, "bremfreel(%p) vp %p flags %X",
|
|
bp, bp->b_vp, bp->b_flags);
|
|
KASSERT(BUF_REFCNT(bp), ("bremfreel: buffer %p not locked.", bp));
|
|
KASSERT(bp->b_qindex != QUEUE_NONE,
|
|
("bremfreel: buffer %p not on a queue.", bp));
|
|
mtx_assert(&bqlock, MA_OWNED);
|
|
|
|
TAILQ_REMOVE(&bufqueues[bp->b_qindex], bp, b_freelist);
|
|
bp->b_qindex = QUEUE_NONE;
|
|
/*
|
|
* If this was a delayed bremfree() we only need to remove the buffer
|
|
* from the queue and return the stats are already done.
|
|
*/
|
|
if (bp->b_flags & B_REMFREE) {
|
|
bp->b_flags &= ~B_REMFREE;
|
|
return;
|
|
}
|
|
/*
|
|
* Fixup numfreebuffers count. If the buffer is invalid or not
|
|
* delayed-write, the buffer was free and we must decrement
|
|
* numfreebuffers.
|
|
*/
|
|
if ((bp->b_flags & B_INVAL) || (bp->b_flags & B_DELWRI) == 0)
|
|
atomic_subtract_int(&numfreebuffers, 1);
|
|
}
|
|
|
|
|
|
/*
|
|
* Get a buffer with the specified data. Look in the cache first. We
|
|
* must clear BIO_ERROR and B_INVAL prior to initiating I/O. If B_CACHE
|
|
* is set, the buffer is valid and we do not have to do anything ( see
|
|
* getblk() ). This is really just a special case of breadn().
|
|
*/
|
|
int
|
|
bread(struct vnode * vp, daddr_t blkno, int size, struct ucred * cred,
|
|
struct buf **bpp)
|
|
{
|
|
|
|
return (breadn(vp, blkno, size, 0, 0, 0, cred, bpp));
|
|
}
|
|
|
|
/*
|
|
* Operates like bread, but also starts asynchronous I/O on
|
|
* read-ahead blocks. We must clear BIO_ERROR and B_INVAL prior
|
|
* to initiating I/O . If B_CACHE is set, the buffer is valid
|
|
* and we do not have to do anything.
|
|
*/
|
|
int
|
|
breadn(struct vnode * vp, daddr_t blkno, int size,
|
|
daddr_t * rablkno, int *rabsize,
|
|
int cnt, struct ucred * cred, struct buf **bpp)
|
|
{
|
|
struct buf *bp, *rabp;
|
|
int i;
|
|
int rv = 0, readwait = 0;
|
|
|
|
CTR3(KTR_BUF, "breadn(%p, %jd, %d)", vp, blkno, size);
|
|
*bpp = bp = getblk(vp, blkno, size, 0, 0, 0);
|
|
|
|
/* if not found in cache, do some I/O */
|
|
if ((bp->b_flags & B_CACHE) == 0) {
|
|
if (curthread != PCPU_GET(idlethread))
|
|
curthread->td_proc->p_stats->p_ru.ru_inblock++;
|
|
bp->b_iocmd = BIO_READ;
|
|
bp->b_flags &= ~B_INVAL;
|
|
bp->b_ioflags &= ~BIO_ERROR;
|
|
if (bp->b_rcred == NOCRED && cred != NOCRED)
|
|
bp->b_rcred = crhold(cred);
|
|
vfs_busy_pages(bp, 0);
|
|
bp->b_iooffset = dbtob(bp->b_blkno);
|
|
bstrategy(bp);
|
|
++readwait;
|
|
}
|
|
|
|
for (i = 0; i < cnt; i++, rablkno++, rabsize++) {
|
|
if (inmem(vp, *rablkno))
|
|
continue;
|
|
rabp = getblk(vp, *rablkno, *rabsize, 0, 0, 0);
|
|
|
|
if ((rabp->b_flags & B_CACHE) == 0) {
|
|
if (curthread != PCPU_GET(idlethread))
|
|
curthread->td_proc->p_stats->p_ru.ru_inblock++;
|
|
rabp->b_flags |= B_ASYNC;
|
|
rabp->b_flags &= ~B_INVAL;
|
|
rabp->b_ioflags &= ~BIO_ERROR;
|
|
rabp->b_iocmd = BIO_READ;
|
|
if (rabp->b_rcred == NOCRED && cred != NOCRED)
|
|
rabp->b_rcred = crhold(cred);
|
|
vfs_busy_pages(rabp, 0);
|
|
BUF_KERNPROC(rabp);
|
|
rabp->b_iooffset = dbtob(rabp->b_blkno);
|
|
bstrategy(rabp);
|
|
} else {
|
|
brelse(rabp);
|
|
}
|
|
}
|
|
|
|
if (readwait) {
|
|
rv = bufwait(bp);
|
|
}
|
|
return (rv);
|
|
}
|
|
|
|
/*
|
|
* Write, release buffer on completion. (Done by iodone
|
|
* if async). Do not bother writing anything if the buffer
|
|
* is invalid.
|
|
*
|
|
* Note that we set B_CACHE here, indicating that buffer is
|
|
* fully valid and thus cacheable. This is true even of NFS
|
|
* now so we set it generally. This could be set either here
|
|
* or in biodone() since the I/O is synchronous. We put it
|
|
* here.
|
|
*/
|
|
int
|
|
bufwrite(struct buf *bp)
|
|
{
|
|
int oldflags;
|
|
|
|
CTR3(KTR_BUF, "bufwrite(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
|
|
if (bp->b_flags & B_INVAL) {
|
|
brelse(bp);
|
|
return (0);
|
|
}
|
|
|
|
oldflags = bp->b_flags;
|
|
|
|
if (BUF_REFCNT(bp) == 0)
|
|
panic("bufwrite: buffer is not busy???");
|
|
KASSERT(!(bp->b_vflags & BV_BKGRDINPROG),
|
|
("FFS background buffer should not get here %p", bp));
|
|
|
|
/* Mark the buffer clean */
|
|
bundirty(bp);
|
|
|
|
bp->b_flags &= ~B_DONE;
|
|
bp->b_ioflags &= ~BIO_ERROR;
|
|
bp->b_flags |= B_CACHE;
|
|
bp->b_iocmd = BIO_WRITE;
|
|
|
|
bufobj_wref(bp->b_bufobj);
|
|
vfs_busy_pages(bp, 1);
|
|
|
|
/*
|
|
* Normal bwrites pipeline writes
|
|
*/
|
|
bp->b_runningbufspace = bp->b_bufsize;
|
|
atomic_add_int(&runningbufspace, bp->b_runningbufspace);
|
|
|
|
if (curthread != PCPU_GET(idlethread))
|
|
curthread->td_proc->p_stats->p_ru.ru_oublock++;
|
|
if (oldflags & B_ASYNC)
|
|
BUF_KERNPROC(bp);
|
|
bp->b_iooffset = dbtob(bp->b_blkno);
|
|
bstrategy(bp);
|
|
|
|
if ((oldflags & B_ASYNC) == 0) {
|
|
int rtval = bufwait(bp);
|
|
brelse(bp);
|
|
return (rtval);
|
|
} else {
|
|
/*
|
|
* don't allow the async write to saturate the I/O
|
|
* system. We will not deadlock here because
|
|
* we are blocking waiting for I/O that is already in-progress
|
|
* to complete. We do not block here if it is the update
|
|
* or syncer daemon trying to clean up as that can lead
|
|
* to deadlock.
|
|
*/
|
|
if ((curthread->td_pflags & TDP_NORUNNINGBUF) == 0)
|
|
waitrunningbufspace();
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Delayed write. (Buffer is marked dirty). Do not bother writing
|
|
* anything if the buffer is marked invalid.
|
|
*
|
|
* Note that since the buffer must be completely valid, we can safely
|
|
* set B_CACHE. In fact, we have to set B_CACHE here rather then in
|
|
* biodone() in order to prevent getblk from writing the buffer
|
|
* out synchronously.
|
|
*/
|
|
void
|
|
bdwrite(struct buf *bp)
|
|
{
|
|
struct thread *td = curthread;
|
|
struct vnode *vp;
|
|
struct buf *nbp;
|
|
struct bufobj *bo;
|
|
|
|
CTR3(KTR_BUF, "bdwrite(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
|
|
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
|
|
KASSERT(BUF_REFCNT(bp) != 0, ("bdwrite: buffer is not busy"));
|
|
|
|
if (bp->b_flags & B_INVAL) {
|
|
brelse(bp);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If we have too many dirty buffers, don't create any more.
|
|
* If we are wildly over our limit, then force a complete
|
|
* cleanup. Otherwise, just keep the situation from getting
|
|
* out of control. Note that we have to avoid a recursive
|
|
* disaster and not try to clean up after our own cleanup!
|
|
*/
|
|
vp = bp->b_vp;
|
|
bo = bp->b_bufobj;
|
|
if ((td->td_pflags & TDP_COWINPROGRESS) == 0) {
|
|
BO_LOCK(bo);
|
|
if (bo->bo_dirty.bv_cnt > dirtybufthresh + 10) {
|
|
BO_UNLOCK(bo);
|
|
(void) VOP_FSYNC(vp, MNT_NOWAIT, td);
|
|
altbufferflushes++;
|
|
} else if (bo->bo_dirty.bv_cnt > dirtybufthresh) {
|
|
/*
|
|
* Try to find a buffer to flush.
|
|
*/
|
|
TAILQ_FOREACH(nbp, &bo->bo_dirty.bv_hd, b_bobufs) {
|
|
if ((nbp->b_vflags & BV_BKGRDINPROG) ||
|
|
BUF_LOCK(nbp,
|
|
LK_EXCLUSIVE | LK_NOWAIT, NULL))
|
|
continue;
|
|
if (bp == nbp)
|
|
panic("bdwrite: found ourselves");
|
|
BO_UNLOCK(bo);
|
|
/* Don't countdeps with the bo lock held. */
|
|
if (buf_countdeps(nbp, 0)) {
|
|
BO_LOCK(bo);
|
|
BUF_UNLOCK(nbp);
|
|
continue;
|
|
}
|
|
if (nbp->b_flags & B_CLUSTEROK) {
|
|
vfs_bio_awrite(nbp);
|
|
} else {
|
|
bremfree(nbp);
|
|
bawrite(nbp);
|
|
}
|
|
dirtybufferflushes++;
|
|
break;
|
|
}
|
|
if (nbp == NULL)
|
|
BO_UNLOCK(bo);
|
|
} else
|
|
BO_UNLOCK(bo);
|
|
} else
|
|
recursiveflushes++;
|
|
|
|
bdirty(bp);
|
|
/*
|
|
* Set B_CACHE, indicating that the buffer is fully valid. This is
|
|
* true even of NFS now.
|
|
*/
|
|
bp->b_flags |= B_CACHE;
|
|
|
|
/*
|
|
* This bmap keeps the system from needing to do the bmap later,
|
|
* perhaps when the system is attempting to do a sync. Since it
|
|
* is likely that the indirect block -- or whatever other datastructure
|
|
* that the filesystem needs is still in memory now, it is a good
|
|
* thing to do this. Note also, that if the pageout daemon is
|
|
* requesting a sync -- there might not be enough memory to do
|
|
* the bmap then... So, this is important to do.
|
|
*/
|
|
if (vp->v_type != VCHR && bp->b_lblkno == bp->b_blkno) {
|
|
VOP_BMAP(vp, bp->b_lblkno, NULL, &bp->b_blkno, NULL, NULL);
|
|
}
|
|
|
|
/*
|
|
* Set the *dirty* buffer range based upon the VM system dirty pages.
|
|
*/
|
|
vfs_setdirty(bp);
|
|
|
|
/*
|
|
* We need to do this here to satisfy the vnode_pager and the
|
|
* pageout daemon, so that it thinks that the pages have been
|
|
* "cleaned". Note that since the pages are in a delayed write
|
|
* buffer -- the VFS layer "will" see that the pages get written
|
|
* out on the next sync, or perhaps the cluster will be completed.
|
|
*/
|
|
vfs_clean_pages(bp);
|
|
bqrelse(bp);
|
|
|
|
/*
|
|
* Wakeup the buffer flushing daemon if we have a lot of dirty
|
|
* buffers (midpoint between our recovery point and our stall
|
|
* point).
|
|
*/
|
|
bd_wakeup((lodirtybuffers + hidirtybuffers) / 2);
|
|
|
|
/*
|
|
* note: we cannot initiate I/O from a bdwrite even if we wanted to,
|
|
* due to the softdep code.
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* bdirty:
|
|
*
|
|
* Turn buffer into delayed write request. We must clear BIO_READ and
|
|
* B_RELBUF, and we must set B_DELWRI. We reassign the buffer to
|
|
* itself to properly update it in the dirty/clean lists. We mark it
|
|
* B_DONE to ensure that any asynchronization of the buffer properly
|
|
* clears B_DONE ( else a panic will occur later ).
|
|
*
|
|
* bdirty() is kinda like bdwrite() - we have to clear B_INVAL which
|
|
* might have been set pre-getblk(). Unlike bwrite/bdwrite, bdirty()
|
|
* should only be called if the buffer is known-good.
|
|
*
|
|
* Since the buffer is not on a queue, we do not update the numfreebuffers
|
|
* count.
|
|
*
|
|
* The buffer must be on QUEUE_NONE.
|
|
*/
|
|
void
|
|
bdirty(struct buf *bp)
|
|
{
|
|
|
|
CTR3(KTR_BUF, "bdirty(%p) vp %p flags %X",
|
|
bp, bp->b_vp, bp->b_flags);
|
|
KASSERT(BUF_REFCNT(bp) == 1, ("bdirty: bp %p not locked",bp));
|
|
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
|
|
KASSERT(bp->b_flags & B_REMFREE || bp->b_qindex == QUEUE_NONE,
|
|
("bdirty: buffer %p still on queue %d", bp, bp->b_qindex));
|
|
bp->b_flags &= ~(B_RELBUF);
|
|
bp->b_iocmd = BIO_WRITE;
|
|
|
|
if ((bp->b_flags & B_DELWRI) == 0) {
|
|
bp->b_flags |= /* XXX B_DONE | */ B_DELWRI;
|
|
reassignbuf(bp);
|
|
atomic_add_int(&numdirtybuffers, 1);
|
|
bd_wakeup((lodirtybuffers + hidirtybuffers) / 2);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* bundirty:
|
|
*
|
|
* Clear B_DELWRI for buffer.
|
|
*
|
|
* Since the buffer is not on a queue, we do not update the numfreebuffers
|
|
* count.
|
|
*
|
|
* The buffer must be on QUEUE_NONE.
|
|
*/
|
|
|
|
void
|
|
bundirty(struct buf *bp)
|
|
{
|
|
|
|
CTR3(KTR_BUF, "bundirty(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
|
|
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
|
|
KASSERT(bp->b_flags & B_REMFREE || bp->b_qindex == QUEUE_NONE,
|
|
("bundirty: buffer %p still on queue %d", bp, bp->b_qindex));
|
|
KASSERT(BUF_REFCNT(bp) == 1, ("bundirty: bp %p not locked",bp));
|
|
|
|
if (bp->b_flags & B_DELWRI) {
|
|
bp->b_flags &= ~B_DELWRI;
|
|
reassignbuf(bp);
|
|
atomic_subtract_int(&numdirtybuffers, 1);
|
|
numdirtywakeup(lodirtybuffers);
|
|
}
|
|
/*
|
|
* Since it is now being written, we can clear its deferred write flag.
|
|
*/
|
|
bp->b_flags &= ~B_DEFERRED;
|
|
}
|
|
|
|
/*
|
|
* bawrite:
|
|
*
|
|
* Asynchronous write. Start output on a buffer, but do not wait for
|
|
* it to complete. The buffer is released when the output completes.
|
|
*
|
|
* bwrite() ( or the VOP routine anyway ) is responsible for handling
|
|
* B_INVAL buffers. Not us.
|
|
*/
|
|
void
|
|
bawrite(struct buf *bp)
|
|
{
|
|
|
|
bp->b_flags |= B_ASYNC;
|
|
(void) bwrite(bp);
|
|
}
|
|
|
|
/*
|
|
* bwillwrite:
|
|
*
|
|
* Called prior to the locking of any vnodes when we are expecting to
|
|
* write. We do not want to starve the buffer cache with too many
|
|
* dirty buffers so we block here. By blocking prior to the locking
|
|
* of any vnodes we attempt to avoid the situation where a locked vnode
|
|
* prevents the various system daemons from flushing related buffers.
|
|
*/
|
|
|
|
void
|
|
bwillwrite(void)
|
|
{
|
|
|
|
if (numdirtybuffers >= hidirtybuffers) {
|
|
mtx_lock(&nblock);
|
|
while (numdirtybuffers >= hidirtybuffers) {
|
|
bd_wakeup(1);
|
|
needsbuffer |= VFS_BIO_NEED_DIRTYFLUSH;
|
|
msleep(&needsbuffer, &nblock,
|
|
(PRIBIO + 4), "flswai", 0);
|
|
}
|
|
mtx_unlock(&nblock);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Return true if we have too many dirty buffers.
|
|
*/
|
|
int
|
|
buf_dirty_count_severe(void)
|
|
{
|
|
|
|
return(numdirtybuffers >= hidirtybuffers);
|
|
}
|
|
|
|
/*
|
|
* brelse:
|
|
*
|
|
* Release a busy buffer and, if requested, free its resources. The
|
|
* buffer will be stashed in the appropriate bufqueue[] allowing it
|
|
* to be accessed later as a cache entity or reused for other purposes.
|
|
*/
|
|
void
|
|
brelse(struct buf *bp)
|
|
{
|
|
CTR3(KTR_BUF, "brelse(%p) vp %p flags %X",
|
|
bp, bp->b_vp, bp->b_flags);
|
|
KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)),
|
|
("brelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp));
|
|
|
|
if (bp->b_iocmd == BIO_WRITE &&
|
|
(bp->b_ioflags & BIO_ERROR) &&
|
|
!(bp->b_flags & B_INVAL)) {
|
|
/*
|
|
* Failed write, redirty. Must clear BIO_ERROR to prevent
|
|
* pages from being scrapped. If B_INVAL is set then
|
|
* this case is not run and the next case is run to
|
|
* destroy the buffer. B_INVAL can occur if the buffer
|
|
* is outside the range supported by the underlying device.
|
|
*/
|
|
bp->b_ioflags &= ~BIO_ERROR;
|
|
bdirty(bp);
|
|
} else if ((bp->b_flags & (B_NOCACHE | B_INVAL)) ||
|
|
(bp->b_ioflags & BIO_ERROR) || (bp->b_bufsize <= 0)) {
|
|
/*
|
|
* Either a failed I/O or we were asked to free or not
|
|
* cache the buffer.
|
|
*/
|
|
bp->b_flags |= B_INVAL;
|
|
if (LIST_FIRST(&bp->b_dep) != NULL)
|
|
buf_deallocate(bp);
|
|
if (bp->b_flags & B_DELWRI) {
|
|
atomic_subtract_int(&numdirtybuffers, 1);
|
|
numdirtywakeup(lodirtybuffers);
|
|
}
|
|
bp->b_flags &= ~(B_DELWRI | B_CACHE);
|
|
if ((bp->b_flags & B_VMIO) == 0) {
|
|
if (bp->b_bufsize)
|
|
allocbuf(bp, 0);
|
|
if (bp->b_vp)
|
|
brelvp(bp);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* We must clear B_RELBUF if B_DELWRI is set. If vfs_vmio_release()
|
|
* is called with B_DELWRI set, the underlying pages may wind up
|
|
* getting freed causing a previous write (bdwrite()) to get 'lost'
|
|
* because pages associated with a B_DELWRI bp are marked clean.
|
|
*
|
|
* We still allow the B_INVAL case to call vfs_vmio_release(), even
|
|
* if B_DELWRI is set.
|
|
*
|
|
* If B_DELWRI is not set we may have to set B_RELBUF if we are low
|
|
* on pages to return pages to the VM page queues.
|
|
*/
|
|
if (bp->b_flags & B_DELWRI)
|
|
bp->b_flags &= ~B_RELBUF;
|
|
else if (vm_page_count_severe()) {
|
|
/*
|
|
* XXX This lock may not be necessary since BKGRDINPROG
|
|
* cannot be set while we hold the buf lock, it can only be
|
|
* cleared if it is already pending.
|
|
*/
|
|
if (bp->b_vp) {
|
|
BO_LOCK(bp->b_bufobj);
|
|
if (!(bp->b_vflags & BV_BKGRDINPROG))
|
|
bp->b_flags |= B_RELBUF;
|
|
BO_UNLOCK(bp->b_bufobj);
|
|
} else
|
|
bp->b_flags |= B_RELBUF;
|
|
}
|
|
|
|
/*
|
|
* VMIO buffer rundown. It is not very necessary to keep a VMIO buffer
|
|
* constituted, not even NFS buffers now. Two flags effect this. If
|
|
* B_INVAL, the struct buf is invalidated but the VM object is kept
|
|
* around ( i.e. so it is trivial to reconstitute the buffer later ).
|
|
*
|
|
* If BIO_ERROR or B_NOCACHE is set, pages in the VM object will be
|
|
* invalidated. BIO_ERROR cannot be set for a failed write unless the
|
|
* buffer is also B_INVAL because it hits the re-dirtying code above.
|
|
*
|
|
* Normally we can do this whether a buffer is B_DELWRI or not. If
|
|
* the buffer is an NFS buffer, it is tracking piecemeal writes or
|
|
* the commit state and we cannot afford to lose the buffer. If the
|
|
* buffer has a background write in progress, we need to keep it
|
|
* around to prevent it from being reconstituted and starting a second
|
|
* background write.
|
|
*/
|
|
if ((bp->b_flags & B_VMIO)
|
|
&& !(bp->b_vp->v_mount != NULL &&
|
|
(bp->b_vp->v_mount->mnt_vfc->vfc_flags & VFCF_NETWORK) != 0 &&
|
|
!vn_isdisk(bp->b_vp, NULL) &&
|
|
(bp->b_flags & B_DELWRI))
|
|
) {
|
|
|
|
int i, j, resid;
|
|
vm_page_t m;
|
|
off_t foff;
|
|
vm_pindex_t poff;
|
|
vm_object_t obj;
|
|
|
|
obj = bp->b_bufobj->bo_object;
|
|
|
|
/*
|
|
* Get the base offset and length of the buffer. Note that
|
|
* in the VMIO case if the buffer block size is not
|
|
* page-aligned then b_data pointer may not be page-aligned.
|
|
* But our b_pages[] array *IS* page aligned.
|
|
*
|
|
* block sizes less then DEV_BSIZE (usually 512) are not
|
|
* supported due to the page granularity bits (m->valid,
|
|
* m->dirty, etc...).
|
|
*
|
|
* See man buf(9) for more information
|
|
*/
|
|
resid = bp->b_bufsize;
|
|
foff = bp->b_offset;
|
|
VM_OBJECT_LOCK(obj);
|
|
for (i = 0; i < bp->b_npages; i++) {
|
|
int had_bogus = 0;
|
|
|
|
m = bp->b_pages[i];
|
|
|
|
/*
|
|
* If we hit a bogus page, fixup *all* the bogus pages
|
|
* now.
|
|
*/
|
|
if (m == bogus_page) {
|
|
poff = OFF_TO_IDX(bp->b_offset);
|
|
had_bogus = 1;
|
|
|
|
for (j = i; j < bp->b_npages; j++) {
|
|
vm_page_t mtmp;
|
|
mtmp = bp->b_pages[j];
|
|
if (mtmp == bogus_page) {
|
|
mtmp = vm_page_lookup(obj, poff + j);
|
|
if (!mtmp) {
|
|
panic("brelse: page missing\n");
|
|
}
|
|
bp->b_pages[j] = mtmp;
|
|
}
|
|
}
|
|
|
|
if ((bp->b_flags & B_INVAL) == 0) {
|
|
pmap_qenter(
|
|
trunc_page((vm_offset_t)bp->b_data),
|
|
bp->b_pages, bp->b_npages);
|
|
}
|
|
m = bp->b_pages[i];
|
|
}
|
|
if ((bp->b_flags & B_NOCACHE) ||
|
|
(bp->b_ioflags & BIO_ERROR)) {
|
|
int poffset = foff & PAGE_MASK;
|
|
int presid = resid > (PAGE_SIZE - poffset) ?
|
|
(PAGE_SIZE - poffset) : resid;
|
|
|
|
KASSERT(presid >= 0, ("brelse: extra page"));
|
|
vm_page_lock_queues();
|
|
vm_page_set_invalid(m, poffset, presid);
|
|
vm_page_unlock_queues();
|
|
if (had_bogus)
|
|
printf("avoided corruption bug in bogus_page/brelse code\n");
|
|
}
|
|
resid -= PAGE_SIZE - (foff & PAGE_MASK);
|
|
foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
|
|
}
|
|
VM_OBJECT_UNLOCK(obj);
|
|
if (bp->b_flags & (B_INVAL | B_RELBUF))
|
|
vfs_vmio_release(bp);
|
|
|
|
} else if (bp->b_flags & B_VMIO) {
|
|
|
|
if (bp->b_flags & (B_INVAL | B_RELBUF)) {
|
|
vfs_vmio_release(bp);
|
|
}
|
|
|
|
}
|
|
|
|
if (BUF_REFCNT(bp) > 1) {
|
|
/* do not release to free list */
|
|
BUF_UNLOCK(bp);
|
|
return;
|
|
}
|
|
|
|
/* enqueue */
|
|
mtx_lock(&bqlock);
|
|
/* Handle delayed bremfree() processing. */
|
|
if (bp->b_flags & B_REMFREE)
|
|
bremfreel(bp);
|
|
if (bp->b_qindex != QUEUE_NONE)
|
|
panic("brelse: free buffer onto another queue???");
|
|
|
|
/* buffers with no memory */
|
|
if (bp->b_bufsize == 0) {
|
|
bp->b_flags |= B_INVAL;
|
|
bp->b_xflags &= ~(BX_BKGRDWRITE | BX_ALTDATA);
|
|
if (bp->b_vflags & BV_BKGRDINPROG)
|
|
panic("losing buffer 1");
|
|
if (bp->b_kvasize) {
|
|
bp->b_qindex = QUEUE_EMPTYKVA;
|
|
} else {
|
|
bp->b_qindex = QUEUE_EMPTY;
|
|
}
|
|
TAILQ_INSERT_HEAD(&bufqueues[bp->b_qindex], bp, b_freelist);
|
|
/* buffers with junk contents */
|
|
} else if (bp->b_flags & (B_INVAL | B_NOCACHE | B_RELBUF) ||
|
|
(bp->b_ioflags & BIO_ERROR)) {
|
|
bp->b_flags |= B_INVAL;
|
|
bp->b_xflags &= ~(BX_BKGRDWRITE | BX_ALTDATA);
|
|
if (bp->b_vflags & BV_BKGRDINPROG)
|
|
panic("losing buffer 2");
|
|
bp->b_qindex = QUEUE_CLEAN;
|
|
TAILQ_INSERT_HEAD(&bufqueues[QUEUE_CLEAN], bp, b_freelist);
|
|
/* remaining buffers */
|
|
} else {
|
|
if (bp->b_flags & B_DELWRI)
|
|
bp->b_qindex = QUEUE_DIRTY;
|
|
else
|
|
bp->b_qindex = QUEUE_CLEAN;
|
|
if (bp->b_flags & B_AGE)
|
|
TAILQ_INSERT_HEAD(&bufqueues[bp->b_qindex], bp, b_freelist);
|
|
else
|
|
TAILQ_INSERT_TAIL(&bufqueues[bp->b_qindex], bp, b_freelist);
|
|
}
|
|
mtx_unlock(&bqlock);
|
|
|
|
/*
|
|
* If B_INVAL and B_DELWRI is set, clear B_DELWRI. We have already
|
|
* placed the buffer on the correct queue. We must also disassociate
|
|
* the device and vnode for a B_INVAL buffer so gbincore() doesn't
|
|
* find it.
|
|
*/
|
|
if (bp->b_flags & B_INVAL) {
|
|
if (bp->b_flags & B_DELWRI)
|
|
bundirty(bp);
|
|
if (bp->b_vp)
|
|
brelvp(bp);
|
|
}
|
|
|
|
/*
|
|
* Fixup numfreebuffers count. The bp is on an appropriate queue
|
|
* unless locked. We then bump numfreebuffers if it is not B_DELWRI.
|
|
* We've already handled the B_INVAL case ( B_DELWRI will be clear
|
|
* if B_INVAL is set ).
|
|
*/
|
|
|
|
if (!(bp->b_flags & B_DELWRI))
|
|
bufcountwakeup();
|
|
|
|
/*
|
|
* Something we can maybe free or reuse
|
|
*/
|
|
if (bp->b_bufsize || bp->b_kvasize)
|
|
bufspacewakeup();
|
|
|
|
bp->b_flags &= ~(B_ASYNC | B_NOCACHE | B_AGE | B_RELBUF | B_DIRECT);
|
|
if ((bp->b_flags & B_DELWRI) == 0 && (bp->b_xflags & BX_VNDIRTY))
|
|
panic("brelse: not dirty");
|
|
/* unlock */
|
|
BUF_UNLOCK(bp);
|
|
}
|
|
|
|
/*
|
|
* Release a buffer back to the appropriate queue but do not try to free
|
|
* it. The buffer is expected to be used again soon.
|
|
*
|
|
* bqrelse() is used by bdwrite() to requeue a delayed write, and used by
|
|
* biodone() to requeue an async I/O on completion. It is also used when
|
|
* known good buffers need to be requeued but we think we may need the data
|
|
* again soon.
|
|
*
|
|
* XXX we should be able to leave the B_RELBUF hint set on completion.
|
|
*/
|
|
void
|
|
bqrelse(struct buf *bp)
|
|
{
|
|
CTR3(KTR_BUF, "bqrelse(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
|
|
KASSERT(!(bp->b_flags & (B_CLUSTER|B_PAGING)),
|
|
("bqrelse: inappropriate B_PAGING or B_CLUSTER bp %p", bp));
|
|
|
|
if (BUF_REFCNT(bp) > 1) {
|
|
/* do not release to free list */
|
|
BUF_UNLOCK(bp);
|
|
return;
|
|
}
|
|
mtx_lock(&bqlock);
|
|
/* Handle delayed bremfree() processing. */
|
|
if (bp->b_flags & B_REMFREE)
|
|
bremfreel(bp);
|
|
if (bp->b_qindex != QUEUE_NONE)
|
|
panic("bqrelse: free buffer onto another queue???");
|
|
/* buffers with stale but valid contents */
|
|
if (bp->b_flags & B_DELWRI) {
|
|
bp->b_qindex = QUEUE_DIRTY;
|
|
TAILQ_INSERT_TAIL(&bufqueues[QUEUE_DIRTY], bp, b_freelist);
|
|
} else {
|
|
/*
|
|
* XXX This lock may not be necessary since BKGRDINPROG
|
|
* cannot be set while we hold the buf lock, it can only be
|
|
* cleared if it is already pending.
|
|
*/
|
|
BO_LOCK(bp->b_bufobj);
|
|
if (!vm_page_count_severe() || bp->b_vflags & BV_BKGRDINPROG) {
|
|
BO_UNLOCK(bp->b_bufobj);
|
|
bp->b_qindex = QUEUE_CLEAN;
|
|
TAILQ_INSERT_TAIL(&bufqueues[QUEUE_CLEAN], bp,
|
|
b_freelist);
|
|
} else {
|
|
/*
|
|
* We are too low on memory, we have to try to free
|
|
* the buffer (most importantly: the wired pages
|
|
* making up its backing store) *now*.
|
|
*/
|
|
BO_UNLOCK(bp->b_bufobj);
|
|
mtx_unlock(&bqlock);
|
|
brelse(bp);
|
|
return;
|
|
}
|
|
}
|
|
mtx_unlock(&bqlock);
|
|
|
|
if ((bp->b_flags & B_INVAL) || !(bp->b_flags & B_DELWRI))
|
|
bufcountwakeup();
|
|
|
|
/*
|
|
* Something we can maybe free or reuse.
|
|
*/
|
|
if (bp->b_bufsize && !(bp->b_flags & B_DELWRI))
|
|
bufspacewakeup();
|
|
|
|
bp->b_flags &= ~(B_ASYNC | B_NOCACHE | B_AGE | B_RELBUF);
|
|
if ((bp->b_flags & B_DELWRI) == 0 && (bp->b_xflags & BX_VNDIRTY))
|
|
panic("bqrelse: not dirty");
|
|
/* unlock */
|
|
BUF_UNLOCK(bp);
|
|
}
|
|
|
|
/* Give pages used by the bp back to the VM system (where possible) */
|
|
static void
|
|
vfs_vmio_release(struct buf *bp)
|
|
{
|
|
int i;
|
|
vm_page_t m;
|
|
|
|
VM_OBJECT_LOCK(bp->b_bufobj->bo_object);
|
|
vm_page_lock_queues();
|
|
for (i = 0; i < bp->b_npages; i++) {
|
|
m = bp->b_pages[i];
|
|
bp->b_pages[i] = NULL;
|
|
/*
|
|
* In order to keep page LRU ordering consistent, put
|
|
* everything on the inactive queue.
|
|
*/
|
|
vm_page_unwire(m, 0);
|
|
/*
|
|
* We don't mess with busy pages, it is
|
|
* the responsibility of the process that
|
|
* busied the pages to deal with them.
|
|
*/
|
|
if ((m->flags & PG_BUSY) || (m->busy != 0))
|
|
continue;
|
|
|
|
if (m->wire_count == 0) {
|
|
/*
|
|
* Might as well free the page if we can and it has
|
|
* no valid data. We also free the page if the
|
|
* buffer was used for direct I/O
|
|
*/
|
|
if ((bp->b_flags & B_ASYNC) == 0 && !m->valid &&
|
|
m->hold_count == 0) {
|
|
pmap_remove_all(m);
|
|
vm_page_free(m);
|
|
} else if (bp->b_flags & B_DIRECT) {
|
|
vm_page_try_to_free(m);
|
|
} else if (vm_page_count_severe()) {
|
|
vm_page_try_to_cache(m);
|
|
}
|
|
}
|
|
}
|
|
vm_page_unlock_queues();
|
|
VM_OBJECT_UNLOCK(bp->b_bufobj->bo_object);
|
|
pmap_qremove(trunc_page((vm_offset_t) bp->b_data), bp->b_npages);
|
|
|
|
if (bp->b_bufsize) {
|
|
bufspacewakeup();
|
|
bp->b_bufsize = 0;
|
|
}
|
|
bp->b_npages = 0;
|
|
bp->b_flags &= ~B_VMIO;
|
|
if (bp->b_vp)
|
|
brelvp(bp);
|
|
}
|
|
|
|
/*
|
|
* Check to see if a block at a particular lbn is available for a clustered
|
|
* write.
|
|
*/
|
|
static int
|
|
vfs_bio_clcheck(struct vnode *vp, int size, daddr_t lblkno, daddr_t blkno)
|
|
{
|
|
struct buf *bpa;
|
|
int match;
|
|
|
|
match = 0;
|
|
|
|
/* If the buf isn't in core skip it */
|
|
if ((bpa = gbincore(&vp->v_bufobj, lblkno)) == NULL)
|
|
return (0);
|
|
|
|
/* If the buf is busy we don't want to wait for it */
|
|
if (BUF_LOCK(bpa, LK_EXCLUSIVE | LK_NOWAIT, NULL) != 0)
|
|
return (0);
|
|
|
|
/* Only cluster with valid clusterable delayed write buffers */
|
|
if ((bpa->b_flags & (B_DELWRI | B_CLUSTEROK | B_INVAL)) !=
|
|
(B_DELWRI | B_CLUSTEROK))
|
|
goto done;
|
|
|
|
if (bpa->b_bufsize != size)
|
|
goto done;
|
|
|
|
/*
|
|
* Check to see if it is in the expected place on disk and that the
|
|
* block has been mapped.
|
|
*/
|
|
if ((bpa->b_blkno != bpa->b_lblkno) && (bpa->b_blkno == blkno))
|
|
match = 1;
|
|
done:
|
|
BUF_UNLOCK(bpa);
|
|
return (match);
|
|
}
|
|
|
|
/*
|
|
* vfs_bio_awrite:
|
|
*
|
|
* Implement clustered async writes for clearing out B_DELWRI buffers.
|
|
* This is much better then the old way of writing only one buffer at
|
|
* a time. Note that we may not be presented with the buffers in the
|
|
* correct order, so we search for the cluster in both directions.
|
|
*/
|
|
int
|
|
vfs_bio_awrite(struct buf *bp)
|
|
{
|
|
int i;
|
|
int j;
|
|
daddr_t lblkno = bp->b_lblkno;
|
|
struct vnode *vp = bp->b_vp;
|
|
int ncl;
|
|
int nwritten;
|
|
int size;
|
|
int maxcl;
|
|
|
|
/*
|
|
* right now we support clustered writing only to regular files. If
|
|
* we find a clusterable block we could be in the middle of a cluster
|
|
* rather then at the beginning.
|
|
*/
|
|
if ((vp->v_type == VREG) &&
|
|
(vp->v_mount != 0) && /* Only on nodes that have the size info */
|
|
(bp->b_flags & (B_CLUSTEROK | B_INVAL)) == B_CLUSTEROK) {
|
|
|
|
size = vp->v_mount->mnt_stat.f_iosize;
|
|
maxcl = MAXPHYS / size;
|
|
|
|
VI_LOCK(vp);
|
|
for (i = 1; i < maxcl; i++)
|
|
if (vfs_bio_clcheck(vp, size, lblkno + i,
|
|
bp->b_blkno + ((i * size) >> DEV_BSHIFT)) == 0)
|
|
break;
|
|
|
|
for (j = 1; i + j <= maxcl && j <= lblkno; j++)
|
|
if (vfs_bio_clcheck(vp, size, lblkno - j,
|
|
bp->b_blkno - ((j * size) >> DEV_BSHIFT)) == 0)
|
|
break;
|
|
|
|
VI_UNLOCK(vp);
|
|
--j;
|
|
ncl = i + j;
|
|
/*
|
|
* this is a possible cluster write
|
|
*/
|
|
if (ncl != 1) {
|
|
BUF_UNLOCK(bp);
|
|
nwritten = cluster_wbuild(vp, size, lblkno - j, ncl);
|
|
return nwritten;
|
|
}
|
|
}
|
|
bremfree(bp);
|
|
bp->b_flags |= B_ASYNC;
|
|
/*
|
|
* default (old) behavior, writing out only one block
|
|
*
|
|
* XXX returns b_bufsize instead of b_bcount for nwritten?
|
|
*/
|
|
nwritten = bp->b_bufsize;
|
|
(void) bwrite(bp);
|
|
|
|
return nwritten;
|
|
}
|
|
|
|
/*
|
|
* getnewbuf:
|
|
*
|
|
* Find and initialize a new buffer header, freeing up existing buffers
|
|
* in the bufqueues as necessary. The new buffer is returned locked.
|
|
*
|
|
* Important: B_INVAL is not set. If the caller wishes to throw the
|
|
* buffer away, the caller must set B_INVAL prior to calling brelse().
|
|
*
|
|
* We block if:
|
|
* We have insufficient buffer headers
|
|
* We have insufficient buffer space
|
|
* buffer_map is too fragmented ( space reservation fails )
|
|
* If we have to flush dirty buffers ( but we try to avoid this )
|
|
*
|
|
* To avoid VFS layer recursion we do not flush dirty buffers ourselves.
|
|
* Instead we ask the buf daemon to do it for us. We attempt to
|
|
* avoid piecemeal wakeups of the pageout daemon.
|
|
*/
|
|
|
|
static struct buf *
|
|
getnewbuf(int slpflag, int slptimeo, int size, int maxsize)
|
|
{
|
|
struct buf *bp;
|
|
struct buf *nbp;
|
|
int defrag = 0;
|
|
int nqindex;
|
|
static int flushingbufs;
|
|
|
|
/*
|
|
* We can't afford to block since we might be holding a vnode lock,
|
|
* which may prevent system daemons from running. We deal with
|
|
* low-memory situations by proactively returning memory and running
|
|
* async I/O rather then sync I/O.
|
|
*/
|
|
|
|
atomic_add_int(&getnewbufcalls, 1);
|
|
atomic_subtract_int(&getnewbufrestarts, 1);
|
|
restart:
|
|
atomic_add_int(&getnewbufrestarts, 1);
|
|
|
|
/*
|
|
* Setup for scan. If we do not have enough free buffers,
|
|
* we setup a degenerate case that immediately fails. Note
|
|
* that if we are specially marked process, we are allowed to
|
|
* dip into our reserves.
|
|
*
|
|
* The scanning sequence is nominally: EMPTY->EMPTYKVA->CLEAN
|
|
*
|
|
* We start with EMPTYKVA. If the list is empty we backup to EMPTY.
|
|
* However, there are a number of cases (defragging, reusing, ...)
|
|
* where we cannot backup.
|
|
*/
|
|
mtx_lock(&bqlock);
|
|
nqindex = QUEUE_EMPTYKVA;
|
|
nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTYKVA]);
|
|
|
|
if (nbp == NULL) {
|
|
/*
|
|
* If no EMPTYKVA buffers and we are either
|
|
* defragging or reusing, locate a CLEAN buffer
|
|
* to free or reuse. If bufspace useage is low
|
|
* skip this step so we can allocate a new buffer.
|
|
*/
|
|
if (defrag || bufspace >= lobufspace) {
|
|
nqindex = QUEUE_CLEAN;
|
|
nbp = TAILQ_FIRST(&bufqueues[QUEUE_CLEAN]);
|
|
}
|
|
|
|
/*
|
|
* If we could not find or were not allowed to reuse a
|
|
* CLEAN buffer, check to see if it is ok to use an EMPTY
|
|
* buffer. We can only use an EMPTY buffer if allocating
|
|
* its KVA would not otherwise run us out of buffer space.
|
|
*/
|
|
if (nbp == NULL && defrag == 0 &&
|
|
bufspace + maxsize < hibufspace) {
|
|
nqindex = QUEUE_EMPTY;
|
|
nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTY]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Run scan, possibly freeing data and/or kva mappings on the fly
|
|
* depending.
|
|
*/
|
|
|
|
while ((bp = nbp) != NULL) {
|
|
int qindex = nqindex;
|
|
|
|
/*
|
|
* Calculate next bp ( we can only use it if we do not block
|
|
* or do other fancy things ).
|
|
*/
|
|
if ((nbp = TAILQ_NEXT(bp, b_freelist)) == NULL) {
|
|
switch(qindex) {
|
|
case QUEUE_EMPTY:
|
|
nqindex = QUEUE_EMPTYKVA;
|
|
if ((nbp = TAILQ_FIRST(&bufqueues[QUEUE_EMPTYKVA])))
|
|
break;
|
|
/* FALLTHROUGH */
|
|
case QUEUE_EMPTYKVA:
|
|
nqindex = QUEUE_CLEAN;
|
|
if ((nbp = TAILQ_FIRST(&bufqueues[QUEUE_CLEAN])))
|
|
break;
|
|
/* FALLTHROUGH */
|
|
case QUEUE_CLEAN:
|
|
/*
|
|
* nbp is NULL.
|
|
*/
|
|
break;
|
|
}
|
|
}
|
|
/*
|
|
* If we are defragging then we need a buffer with
|
|
* b_kvasize != 0. XXX this situation should no longer
|
|
* occur, if defrag is non-zero the buffer's b_kvasize
|
|
* should also be non-zero at this point. XXX
|
|
*/
|
|
if (defrag && bp->b_kvasize == 0) {
|
|
printf("Warning: defrag empty buffer %p\n", bp);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Start freeing the bp. This is somewhat involved. nbp
|
|
* remains valid only for QUEUE_EMPTY[KVA] bp's.
|
|
*/
|
|
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT, NULL) != 0)
|
|
continue;
|
|
if (bp->b_vp) {
|
|
BO_LOCK(bp->b_bufobj);
|
|
if (bp->b_vflags & BV_BKGRDINPROG) {
|
|
BO_UNLOCK(bp->b_bufobj);
|
|
BUF_UNLOCK(bp);
|
|
continue;
|
|
}
|
|
BO_UNLOCK(bp->b_bufobj);
|
|
}
|
|
CTR6(KTR_BUF,
|
|
"getnewbuf(%p) vp %p flags %X kvasize %d bufsize %d "
|
|
"queue %d (recycling)", bp, bp->b_vp, bp->b_flags,
|
|
bp->b_kvasize, bp->b_bufsize, qindex);
|
|
|
|
/*
|
|
* Sanity Checks
|
|
*/
|
|
KASSERT(bp->b_qindex == qindex, ("getnewbuf: inconsistant queue %d bp %p", qindex, bp));
|
|
|
|
/*
|
|
* Note: we no longer distinguish between VMIO and non-VMIO
|
|
* buffers.
|
|
*/
|
|
|
|
KASSERT((bp->b_flags & B_DELWRI) == 0, ("delwri buffer %p found in queue %d", bp, qindex));
|
|
|
|
bremfreel(bp);
|
|
mtx_unlock(&bqlock);
|
|
|
|
if (qindex == QUEUE_CLEAN) {
|
|
if (bp->b_flags & B_VMIO) {
|
|
bp->b_flags &= ~B_ASYNC;
|
|
vfs_vmio_release(bp);
|
|
}
|
|
if (bp->b_vp)
|
|
brelvp(bp);
|
|
}
|
|
|
|
/*
|
|
* NOTE: nbp is now entirely invalid. We can only restart
|
|
* the scan from this point on.
|
|
*
|
|
* Get the rest of the buffer freed up. b_kva* is still
|
|
* valid after this operation.
|
|
*/
|
|
|
|
if (bp->b_rcred != NOCRED) {
|
|
crfree(bp->b_rcred);
|
|
bp->b_rcred = NOCRED;
|
|
}
|
|
if (bp->b_wcred != NOCRED) {
|
|
crfree(bp->b_wcred);
|
|
bp->b_wcred = NOCRED;
|
|
}
|
|
if (LIST_FIRST(&bp->b_dep) != NULL)
|
|
buf_deallocate(bp);
|
|
if (bp->b_vflags & BV_BKGRDINPROG)
|
|
panic("losing buffer 3");
|
|
KASSERT(bp->b_vp == NULL,
|
|
("bp: %p still has vnode %p. qindex: %d",
|
|
bp, bp->b_vp, qindex));
|
|
KASSERT((bp->b_xflags & (BX_VNCLEAN|BX_VNDIRTY)) == 0,
|
|
("bp: %p still on a buffer list. xflags %X",
|
|
bp, bp->b_xflags));
|
|
|
|
if (bp->b_bufsize)
|
|
allocbuf(bp, 0);
|
|
|
|
bp->b_flags = 0;
|
|
bp->b_ioflags = 0;
|
|
bp->b_xflags = 0;
|
|
bp->b_vflags = 0;
|
|
bp->b_vp = NULL;
|
|
bp->b_blkno = bp->b_lblkno = 0;
|
|
bp->b_offset = NOOFFSET;
|
|
bp->b_iodone = 0;
|
|
bp->b_error = 0;
|
|
bp->b_resid = 0;
|
|
bp->b_bcount = 0;
|
|
bp->b_npages = 0;
|
|
bp->b_dirtyoff = bp->b_dirtyend = 0;
|
|
bp->b_bufobj = NULL;
|
|
|
|
LIST_INIT(&bp->b_dep);
|
|
|
|
/*
|
|
* If we are defragging then free the buffer.
|
|
*/
|
|
if (defrag) {
|
|
bp->b_flags |= B_INVAL;
|
|
bfreekva(bp);
|
|
brelse(bp);
|
|
defrag = 0;
|
|
goto restart;
|
|
}
|
|
|
|
/*
|
|
* If we are overcomitted then recover the buffer and its
|
|
* KVM space. This occurs in rare situations when multiple
|
|
* processes are blocked in getnewbuf() or allocbuf().
|
|
*/
|
|
if (bufspace >= hibufspace)
|
|
flushingbufs = 1;
|
|
if (flushingbufs && bp->b_kvasize != 0) {
|
|
bp->b_flags |= B_INVAL;
|
|
bfreekva(bp);
|
|
brelse(bp);
|
|
goto restart;
|
|
}
|
|
if (bufspace < lobufspace)
|
|
flushingbufs = 0;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If we exhausted our list, sleep as appropriate. We may have to
|
|
* wakeup various daemons and write out some dirty buffers.
|
|
*
|
|
* Generally we are sleeping due to insufficient buffer space.
|
|
*/
|
|
|
|
if (bp == NULL) {
|
|
int flags;
|
|
char *waitmsg;
|
|
|
|
mtx_unlock(&bqlock);
|
|
if (defrag) {
|
|
flags = VFS_BIO_NEED_BUFSPACE;
|
|
waitmsg = "nbufkv";
|
|
} else if (bufspace >= hibufspace) {
|
|
waitmsg = "nbufbs";
|
|
flags = VFS_BIO_NEED_BUFSPACE;
|
|
} else {
|
|
waitmsg = "newbuf";
|
|
flags = VFS_BIO_NEED_ANY;
|
|
}
|
|
|
|
bd_speedup(); /* heeeelp */
|
|
|
|
mtx_lock(&nblock);
|
|
needsbuffer |= flags;
|
|
while (needsbuffer & flags) {
|
|
if (msleep(&needsbuffer, &nblock,
|
|
(PRIBIO + 4) | slpflag, waitmsg, slptimeo)) {
|
|
mtx_unlock(&nblock);
|
|
return (NULL);
|
|
}
|
|
}
|
|
mtx_unlock(&nblock);
|
|
} else {
|
|
/*
|
|
* We finally have a valid bp. We aren't quite out of the
|
|
* woods, we still have to reserve kva space. In order
|
|
* to keep fragmentation sane we only allocate kva in
|
|
* BKVASIZE chunks.
|
|
*/
|
|
maxsize = (maxsize + BKVAMASK) & ~BKVAMASK;
|
|
|
|
if (maxsize != bp->b_kvasize) {
|
|
vm_offset_t addr = 0;
|
|
|
|
bfreekva(bp);
|
|
|
|
vm_map_lock(buffer_map);
|
|
if (vm_map_findspace(buffer_map,
|
|
vm_map_min(buffer_map), maxsize, &addr)) {
|
|
/*
|
|
* Uh oh. Buffer map is to fragmented. We
|
|
* must defragment the map.
|
|
*/
|
|
atomic_add_int(&bufdefragcnt, 1);
|
|
vm_map_unlock(buffer_map);
|
|
defrag = 1;
|
|
bp->b_flags |= B_INVAL;
|
|
brelse(bp);
|
|
goto restart;
|
|
}
|
|
if (addr) {
|
|
vm_map_insert(buffer_map, NULL, 0,
|
|
addr, addr + maxsize,
|
|
VM_PROT_ALL, VM_PROT_ALL, MAP_NOFAULT);
|
|
|
|
bp->b_kvabase = (caddr_t) addr;
|
|
bp->b_kvasize = maxsize;
|
|
atomic_add_int(&bufspace, bp->b_kvasize);
|
|
atomic_add_int(&bufreusecnt, 1);
|
|
}
|
|
vm_map_unlock(buffer_map);
|
|
}
|
|
bp->b_saveaddr = bp->b_kvabase;
|
|
bp->b_data = bp->b_saveaddr;
|
|
}
|
|
return(bp);
|
|
}
|
|
|
|
/*
|
|
* buf_daemon:
|
|
*
|
|
* buffer flushing daemon. Buffers are normally flushed by the
|
|
* update daemon but if it cannot keep up this process starts to
|
|
* take the load in an attempt to prevent getnewbuf() from blocking.
|
|
*/
|
|
|
|
static struct kproc_desc buf_kp = {
|
|
"bufdaemon",
|
|
buf_daemon,
|
|
&bufdaemonproc
|
|
};
|
|
SYSINIT(bufdaemon, SI_SUB_KTHREAD_BUF, SI_ORDER_FIRST, kproc_start, &buf_kp)
|
|
|
|
static void
|
|
buf_daemon()
|
|
{
|
|
mtx_lock(&Giant);
|
|
|
|
/*
|
|
* This process needs to be suspended prior to shutdown sync.
|
|
*/
|
|
EVENTHANDLER_REGISTER(shutdown_pre_sync, kproc_shutdown, bufdaemonproc,
|
|
SHUTDOWN_PRI_LAST);
|
|
|
|
/*
|
|
* This process is allowed to take the buffer cache to the limit
|
|
*/
|
|
curthread->td_pflags |= TDP_NORUNNINGBUF;
|
|
mtx_lock(&bdlock);
|
|
for (;;) {
|
|
bd_request = 0;
|
|
mtx_unlock(&bdlock);
|
|
|
|
kthread_suspend_check(bufdaemonproc);
|
|
|
|
/*
|
|
* Do the flush. Limit the amount of in-transit I/O we
|
|
* allow to build up, otherwise we would completely saturate
|
|
* the I/O system. Wakeup any waiting processes before we
|
|
* normally would so they can run in parallel with our drain.
|
|
*/
|
|
while (numdirtybuffers > lodirtybuffers) {
|
|
if (flushbufqueues(0) == 0) {
|
|
/*
|
|
* Could not find any buffers without rollback
|
|
* dependencies, so just write the first one
|
|
* in the hopes of eventually making progress.
|
|
*/
|
|
flushbufqueues(1);
|
|
break;
|
|
}
|
|
uio_yield();
|
|
}
|
|
|
|
/*
|
|
* Only clear bd_request if we have reached our low water
|
|
* mark. The buf_daemon normally waits 1 second and
|
|
* then incrementally flushes any dirty buffers that have
|
|
* built up, within reason.
|
|
*
|
|
* If we were unable to hit our low water mark and couldn't
|
|
* find any flushable buffers, we sleep half a second.
|
|
* Otherwise we loop immediately.
|
|
*/
|
|
mtx_lock(&bdlock);
|
|
if (numdirtybuffers <= lodirtybuffers) {
|
|
/*
|
|
* We reached our low water mark, reset the
|
|
* request and sleep until we are needed again.
|
|
* The sleep is just so the suspend code works.
|
|
*/
|
|
bd_request = 0;
|
|
msleep(&bd_request, &bdlock, PVM, "psleep", hz);
|
|
} else {
|
|
/*
|
|
* We couldn't find any flushable dirty buffers but
|
|
* still have too many dirty buffers, we
|
|
* have to sleep and try again. (rare)
|
|
*/
|
|
msleep(&bd_request, &bdlock, PVM, "qsleep", hz / 10);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* flushbufqueues:
|
|
*
|
|
* Try to flush a buffer in the dirty queue. We must be careful to
|
|
* free up B_INVAL buffers instead of write them, which NFS is
|
|
* particularly sensitive to.
|
|
*/
|
|
static int flushwithdeps = 0;
|
|
SYSCTL_INT(_vfs, OID_AUTO, flushwithdeps, CTLFLAG_RW, &flushwithdeps,
|
|
0, "Number of buffers flushed with dependecies that require rollbacks");
|
|
|
|
static int
|
|
flushbufqueues(int flushdeps)
|
|
{
|
|
struct thread *td = curthread;
|
|
struct buf sentinel;
|
|
struct vnode *vp;
|
|
struct mount *mp;
|
|
struct buf *bp;
|
|
int hasdeps;
|
|
int flushed;
|
|
int target;
|
|
|
|
target = numdirtybuffers - lodirtybuffers;
|
|
if (flushdeps && target > 2)
|
|
target /= 2;
|
|
flushed = 0;
|
|
bp = NULL;
|
|
mtx_lock(&bqlock);
|
|
TAILQ_INSERT_TAIL(&bufqueues[QUEUE_DIRTY], &sentinel, b_freelist);
|
|
while (flushed != target) {
|
|
bp = TAILQ_FIRST(&bufqueues[QUEUE_DIRTY]);
|
|
if (bp == &sentinel)
|
|
break;
|
|
TAILQ_REMOVE(&bufqueues[QUEUE_DIRTY], bp, b_freelist);
|
|
TAILQ_INSERT_TAIL(&bufqueues[QUEUE_DIRTY], bp, b_freelist);
|
|
|
|
if (BUF_LOCK(bp, LK_EXCLUSIVE | LK_NOWAIT, NULL) != 0)
|
|
continue;
|
|
BO_LOCK(bp->b_bufobj);
|
|
if ((bp->b_vflags & BV_BKGRDINPROG) != 0 ||
|
|
(bp->b_flags & B_DELWRI) == 0) {
|
|
BO_UNLOCK(bp->b_bufobj);
|
|
BUF_UNLOCK(bp);
|
|
continue;
|
|
}
|
|
BO_UNLOCK(bp->b_bufobj);
|
|
if (bp->b_flags & B_INVAL) {
|
|
bremfreel(bp);
|
|
mtx_unlock(&bqlock);
|
|
brelse(bp);
|
|
flushed++;
|
|
numdirtywakeup((lodirtybuffers + hidirtybuffers) / 2);
|
|
mtx_lock(&bqlock);
|
|
continue;
|
|
}
|
|
|
|
if (LIST_FIRST(&bp->b_dep) != NULL && buf_countdeps(bp, 0)) {
|
|
if (flushdeps == 0) {
|
|
BUF_UNLOCK(bp);
|
|
continue;
|
|
}
|
|
hasdeps = 1;
|
|
} else
|
|
hasdeps = 0;
|
|
/*
|
|
* We must hold the lock on a vnode before writing
|
|
* one of its buffers. Otherwise we may confuse, or
|
|
* in the case of a snapshot vnode, deadlock the
|
|
* system.
|
|
*
|
|
* The lock order here is the reverse of the normal
|
|
* of vnode followed by buf lock. This is ok because
|
|
* the NOWAIT will prevent deadlock.
|
|
*/
|
|
vp = bp->b_vp;
|
|
if (vn_start_write(vp, &mp, V_NOWAIT) != 0) {
|
|
BUF_UNLOCK(bp);
|
|
continue;
|
|
}
|
|
if (vn_lock(vp, LK_EXCLUSIVE | LK_NOWAIT, td) == 0) {
|
|
mtx_unlock(&bqlock);
|
|
CTR3(KTR_BUF, "flushbufqueue(%p) vp %p flags %X",
|
|
bp, bp->b_vp, bp->b_flags);
|
|
vfs_bio_awrite(bp);
|
|
vn_finished_write(mp);
|
|
VOP_UNLOCK(vp, 0, td);
|
|
flushwithdeps += hasdeps;
|
|
flushed++;
|
|
waitrunningbufspace();
|
|
numdirtywakeup((lodirtybuffers + hidirtybuffers) / 2);
|
|
mtx_lock(&bqlock);
|
|
continue;
|
|
}
|
|
vn_finished_write(mp);
|
|
BUF_UNLOCK(bp);
|
|
}
|
|
TAILQ_REMOVE(&bufqueues[QUEUE_DIRTY], &sentinel, b_freelist);
|
|
mtx_unlock(&bqlock);
|
|
return (flushed);
|
|
}
|
|
|
|
/*
|
|
* Check to see if a block is currently memory resident.
|
|
*/
|
|
struct buf *
|
|
incore(struct bufobj *bo, daddr_t blkno)
|
|
{
|
|
struct buf *bp;
|
|
|
|
BO_LOCK(bo);
|
|
bp = gbincore(bo, blkno);
|
|
BO_UNLOCK(bo);
|
|
return (bp);
|
|
}
|
|
|
|
/*
|
|
* Returns true if no I/O is needed to access the
|
|
* associated VM object. This is like incore except
|
|
* it also hunts around in the VM system for the data.
|
|
*/
|
|
|
|
static int
|
|
inmem(struct vnode * vp, daddr_t blkno)
|
|
{
|
|
vm_object_t obj;
|
|
vm_offset_t toff, tinc, size;
|
|
vm_page_t m;
|
|
vm_ooffset_t off;
|
|
|
|
ASSERT_VOP_LOCKED(vp, "inmem");
|
|
|
|
if (incore(&vp->v_bufobj, blkno))
|
|
return 1;
|
|
if (vp->v_mount == NULL)
|
|
return 0;
|
|
obj = vp->v_object;
|
|
if (obj == NULL)
|
|
return (0);
|
|
|
|
size = PAGE_SIZE;
|
|
if (size > vp->v_mount->mnt_stat.f_iosize)
|
|
size = vp->v_mount->mnt_stat.f_iosize;
|
|
off = (vm_ooffset_t)blkno * (vm_ooffset_t)vp->v_mount->mnt_stat.f_iosize;
|
|
|
|
VM_OBJECT_LOCK(obj);
|
|
for (toff = 0; toff < vp->v_mount->mnt_stat.f_iosize; toff += tinc) {
|
|
m = vm_page_lookup(obj, OFF_TO_IDX(off + toff));
|
|
if (!m)
|
|
goto notinmem;
|
|
tinc = size;
|
|
if (tinc > PAGE_SIZE - ((toff + off) & PAGE_MASK))
|
|
tinc = PAGE_SIZE - ((toff + off) & PAGE_MASK);
|
|
if (vm_page_is_valid(m,
|
|
(vm_offset_t) ((toff + off) & PAGE_MASK), tinc) == 0)
|
|
goto notinmem;
|
|
}
|
|
VM_OBJECT_UNLOCK(obj);
|
|
return 1;
|
|
|
|
notinmem:
|
|
VM_OBJECT_UNLOCK(obj);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* vfs_setdirty:
|
|
*
|
|
* Sets the dirty range for a buffer based on the status of the dirty
|
|
* bits in the pages comprising the buffer.
|
|
*
|
|
* The range is limited to the size of the buffer.
|
|
*
|
|
* This routine is primarily used by NFS, but is generalized for the
|
|
* B_VMIO case.
|
|
*/
|
|
static void
|
|
vfs_setdirty(struct buf *bp)
|
|
{
|
|
int i;
|
|
vm_object_t object;
|
|
|
|
/*
|
|
* Degenerate case - empty buffer
|
|
*/
|
|
|
|
if (bp->b_bufsize == 0)
|
|
return;
|
|
|
|
/*
|
|
* We qualify the scan for modified pages on whether the
|
|
* object has been flushed yet. The OBJ_WRITEABLE flag
|
|
* is not cleared simply by protecting pages off.
|
|
*/
|
|
|
|
if ((bp->b_flags & B_VMIO) == 0)
|
|
return;
|
|
|
|
object = bp->b_pages[0]->object;
|
|
VM_OBJECT_LOCK(object);
|
|
if ((object->flags & OBJ_WRITEABLE) && !(object->flags & OBJ_MIGHTBEDIRTY))
|
|
printf("Warning: object %p writeable but not mightbedirty\n", object);
|
|
if (!(object->flags & OBJ_WRITEABLE) && (object->flags & OBJ_MIGHTBEDIRTY))
|
|
printf("Warning: object %p mightbedirty but not writeable\n", object);
|
|
|
|
if (object->flags & (OBJ_MIGHTBEDIRTY|OBJ_CLEANING)) {
|
|
vm_offset_t boffset;
|
|
vm_offset_t eoffset;
|
|
|
|
vm_page_lock_queues();
|
|
/*
|
|
* test the pages to see if they have been modified directly
|
|
* by users through the VM system.
|
|
*/
|
|
for (i = 0; i < bp->b_npages; i++)
|
|
vm_page_test_dirty(bp->b_pages[i]);
|
|
|
|
/*
|
|
* Calculate the encompassing dirty range, boffset and eoffset,
|
|
* (eoffset - boffset) bytes.
|
|
*/
|
|
|
|
for (i = 0; i < bp->b_npages; i++) {
|
|
if (bp->b_pages[i]->dirty)
|
|
break;
|
|
}
|
|
boffset = (i << PAGE_SHIFT) - (bp->b_offset & PAGE_MASK);
|
|
|
|
for (i = bp->b_npages - 1; i >= 0; --i) {
|
|
if (bp->b_pages[i]->dirty) {
|
|
break;
|
|
}
|
|
}
|
|
eoffset = ((i + 1) << PAGE_SHIFT) - (bp->b_offset & PAGE_MASK);
|
|
|
|
vm_page_unlock_queues();
|
|
/*
|
|
* Fit it to the buffer.
|
|
*/
|
|
|
|
if (eoffset > bp->b_bcount)
|
|
eoffset = bp->b_bcount;
|
|
|
|
/*
|
|
* If we have a good dirty range, merge with the existing
|
|
* dirty range.
|
|
*/
|
|
|
|
if (boffset < eoffset) {
|
|
if (bp->b_dirtyoff > boffset)
|
|
bp->b_dirtyoff = boffset;
|
|
if (bp->b_dirtyend < eoffset)
|
|
bp->b_dirtyend = eoffset;
|
|
}
|
|
}
|
|
VM_OBJECT_UNLOCK(object);
|
|
}
|
|
|
|
/*
|
|
* getblk:
|
|
*
|
|
* Get a block given a specified block and offset into a file/device.
|
|
* The buffers B_DONE bit will be cleared on return, making it almost
|
|
* ready for an I/O initiation. B_INVAL may or may not be set on
|
|
* return. The caller should clear B_INVAL prior to initiating a
|
|
* READ.
|
|
*
|
|
* For a non-VMIO buffer, B_CACHE is set to the opposite of B_INVAL for
|
|
* an existing buffer.
|
|
*
|
|
* For a VMIO buffer, B_CACHE is modified according to the backing VM.
|
|
* If getblk()ing a previously 0-sized invalid buffer, B_CACHE is set
|
|
* and then cleared based on the backing VM. If the previous buffer is
|
|
* non-0-sized but invalid, B_CACHE will be cleared.
|
|
*
|
|
* If getblk() must create a new buffer, the new buffer is returned with
|
|
* both B_INVAL and B_CACHE clear unless it is a VMIO buffer, in which
|
|
* case it is returned with B_INVAL clear and B_CACHE set based on the
|
|
* backing VM.
|
|
*
|
|
* getblk() also forces a bwrite() for any B_DELWRI buffer whos
|
|
* B_CACHE bit is clear.
|
|
*
|
|
* What this means, basically, is that the caller should use B_CACHE to
|
|
* determine whether the buffer is fully valid or not and should clear
|
|
* B_INVAL prior to issuing a read. If the caller intends to validate
|
|
* the buffer by loading its data area with something, the caller needs
|
|
* to clear B_INVAL. If the caller does this without issuing an I/O,
|
|
* the caller should set B_CACHE ( as an optimization ), else the caller
|
|
* should issue the I/O and biodone() will set B_CACHE if the I/O was
|
|
* a write attempt or if it was a successfull read. If the caller
|
|
* intends to issue a READ, the caller must clear B_INVAL and BIO_ERROR
|
|
* prior to issuing the READ. biodone() will *not* clear B_INVAL.
|
|
*/
|
|
struct buf *
|
|
getblk(struct vnode * vp, daddr_t blkno, int size, int slpflag, int slptimeo,
|
|
int flags)
|
|
{
|
|
struct buf *bp;
|
|
struct bufobj *bo;
|
|
int error;
|
|
|
|
CTR3(KTR_BUF, "getblk(%p, %ld, %d)", vp, (long)blkno, size);
|
|
ASSERT_VOP_LOCKED(vp, "getblk");
|
|
if (size > MAXBSIZE)
|
|
panic("getblk: size(%d) > MAXBSIZE(%d)\n", size, MAXBSIZE);
|
|
|
|
bo = &vp->v_bufobj;
|
|
loop:
|
|
/*
|
|
* Block if we are low on buffers. Certain processes are allowed
|
|
* to completely exhaust the buffer cache.
|
|
*
|
|
* If this check ever becomes a bottleneck it may be better to
|
|
* move it into the else, when gbincore() fails. At the moment
|
|
* it isn't a problem.
|
|
*
|
|
* XXX remove if 0 sections (clean this up after its proven)
|
|
*/
|
|
if (numfreebuffers == 0) {
|
|
if (curthread == PCPU_GET(idlethread))
|
|
return NULL;
|
|
mtx_lock(&nblock);
|
|
needsbuffer |= VFS_BIO_NEED_ANY;
|
|
mtx_unlock(&nblock);
|
|
}
|
|
|
|
VI_LOCK(vp);
|
|
bp = gbincore(bo, blkno);
|
|
if (bp != NULL) {
|
|
int lockflags;
|
|
/*
|
|
* Buffer is in-core. If the buffer is not busy, it must
|
|
* be on a queue.
|
|
*/
|
|
lockflags = LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK;
|
|
|
|
if (flags & GB_LOCK_NOWAIT)
|
|
lockflags |= LK_NOWAIT;
|
|
|
|
error = BUF_TIMELOCK(bp, lockflags,
|
|
VI_MTX(vp), "getblk", slpflag, slptimeo);
|
|
|
|
/*
|
|
* If we slept and got the lock we have to restart in case
|
|
* the buffer changed identities.
|
|
*/
|
|
if (error == ENOLCK)
|
|
goto loop;
|
|
/* We timed out or were interrupted. */
|
|
else if (error)
|
|
return (NULL);
|
|
|
|
/*
|
|
* The buffer is locked. B_CACHE is cleared if the buffer is
|
|
* invalid. Otherwise, for a non-VMIO buffer, B_CACHE is set
|
|
* and for a VMIO buffer B_CACHE is adjusted according to the
|
|
* backing VM cache.
|
|
*/
|
|
if (bp->b_flags & B_INVAL)
|
|
bp->b_flags &= ~B_CACHE;
|
|
else if ((bp->b_flags & (B_VMIO | B_INVAL)) == 0)
|
|
bp->b_flags |= B_CACHE;
|
|
bremfree(bp);
|
|
|
|
/*
|
|
* check for size inconsistancies for non-VMIO case.
|
|
*/
|
|
|
|
if (bp->b_bcount != size) {
|
|
if ((bp->b_flags & B_VMIO) == 0 ||
|
|
(size > bp->b_kvasize)) {
|
|
if (bp->b_flags & B_DELWRI) {
|
|
bp->b_flags |= B_NOCACHE;
|
|
bwrite(bp);
|
|
} else {
|
|
if ((bp->b_flags & B_VMIO) &&
|
|
(LIST_FIRST(&bp->b_dep) == NULL)) {
|
|
bp->b_flags |= B_RELBUF;
|
|
brelse(bp);
|
|
} else {
|
|
bp->b_flags |= B_NOCACHE;
|
|
bwrite(bp);
|
|
}
|
|
}
|
|
goto loop;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If the size is inconsistant in the VMIO case, we can resize
|
|
* the buffer. This might lead to B_CACHE getting set or
|
|
* cleared. If the size has not changed, B_CACHE remains
|
|
* unchanged from its previous state.
|
|
*/
|
|
|
|
if (bp->b_bcount != size)
|
|
allocbuf(bp, size);
|
|
|
|
KASSERT(bp->b_offset != NOOFFSET,
|
|
("getblk: no buffer offset"));
|
|
|
|
/*
|
|
* A buffer with B_DELWRI set and B_CACHE clear must
|
|
* be committed before we can return the buffer in
|
|
* order to prevent the caller from issuing a read
|
|
* ( due to B_CACHE not being set ) and overwriting
|
|
* it.
|
|
*
|
|
* Most callers, including NFS and FFS, need this to
|
|
* operate properly either because they assume they
|
|
* can issue a read if B_CACHE is not set, or because
|
|
* ( for example ) an uncached B_DELWRI might loop due
|
|
* to softupdates re-dirtying the buffer. In the latter
|
|
* case, B_CACHE is set after the first write completes,
|
|
* preventing further loops.
|
|
* NOTE! b*write() sets B_CACHE. If we cleared B_CACHE
|
|
* above while extending the buffer, we cannot allow the
|
|
* buffer to remain with B_CACHE set after the write
|
|
* completes or it will represent a corrupt state. To
|
|
* deal with this we set B_NOCACHE to scrap the buffer
|
|
* after the write.
|
|
*
|
|
* We might be able to do something fancy, like setting
|
|
* B_CACHE in bwrite() except if B_DELWRI is already set,
|
|
* so the below call doesn't set B_CACHE, but that gets real
|
|
* confusing. This is much easier.
|
|
*/
|
|
|
|
if ((bp->b_flags & (B_CACHE|B_DELWRI)) == B_DELWRI) {
|
|
bp->b_flags |= B_NOCACHE;
|
|
bwrite(bp);
|
|
goto loop;
|
|
}
|
|
bp->b_flags &= ~B_DONE;
|
|
} else {
|
|
int bsize, maxsize, vmio;
|
|
off_t offset;
|
|
|
|
/*
|
|
* Buffer is not in-core, create new buffer. The buffer
|
|
* returned by getnewbuf() is locked. Note that the returned
|
|
* buffer is also considered valid (not marked B_INVAL).
|
|
*/
|
|
VI_UNLOCK(vp);
|
|
/*
|
|
* If the user does not want us to create the buffer, bail out
|
|
* here.
|
|
*/
|
|
if (flags & GB_NOCREAT)
|
|
return NULL;
|
|
bsize = bo->bo_bsize;
|
|
offset = blkno * bsize;
|
|
vmio = vp->v_object != NULL;
|
|
maxsize = vmio ? size + (offset & PAGE_MASK) : size;
|
|
maxsize = imax(maxsize, bsize);
|
|
|
|
bp = getnewbuf(slpflag, slptimeo, size, maxsize);
|
|
if (bp == NULL) {
|
|
if (slpflag || slptimeo)
|
|
return NULL;
|
|
goto loop;
|
|
}
|
|
|
|
/*
|
|
* This code is used to make sure that a buffer is not
|
|
* created while the getnewbuf routine is blocked.
|
|
* This can be a problem whether the vnode is locked or not.
|
|
* If the buffer is created out from under us, we have to
|
|
* throw away the one we just created.
|
|
*
|
|
* Note: this must occur before we associate the buffer
|
|
* with the vp especially considering limitations in
|
|
* the splay tree implementation when dealing with duplicate
|
|
* lblkno's.
|
|
*/
|
|
BO_LOCK(bo);
|
|
if (gbincore(bo, blkno)) {
|
|
BO_UNLOCK(bo);
|
|
bp->b_flags |= B_INVAL;
|
|
brelse(bp);
|
|
goto loop;
|
|
}
|
|
|
|
/*
|
|
* Insert the buffer into the hash, so that it can
|
|
* be found by incore.
|
|
*/
|
|
bp->b_blkno = bp->b_lblkno = blkno;
|
|
bp->b_offset = offset;
|
|
|
|
bgetvp(vp, bp);
|
|
BO_UNLOCK(bo);
|
|
|
|
/*
|
|
* set B_VMIO bit. allocbuf() the buffer bigger. Since the
|
|
* buffer size starts out as 0, B_CACHE will be set by
|
|
* allocbuf() for the VMIO case prior to it testing the
|
|
* backing store for validity.
|
|
*/
|
|
|
|
if (vmio) {
|
|
bp->b_flags |= B_VMIO;
|
|
#if defined(VFS_BIO_DEBUG)
|
|
if (vn_canvmio(vp) != TRUE)
|
|
printf("getblk: VMIO on vnode type %d\n",
|
|
vp->v_type);
|
|
#endif
|
|
KASSERT(vp->v_object == bp->b_bufobj->bo_object,
|
|
("ARGH! different b_bufobj->bo_object %p %p %p\n",
|
|
bp, vp->v_object, bp->b_bufobj->bo_object));
|
|
} else {
|
|
bp->b_flags &= ~B_VMIO;
|
|
KASSERT(bp->b_bufobj->bo_object == NULL,
|
|
("ARGH! has b_bufobj->bo_object %p %p\n",
|
|
bp, bp->b_bufobj->bo_object));
|
|
}
|
|
|
|
allocbuf(bp, size);
|
|
bp->b_flags &= ~B_DONE;
|
|
}
|
|
CTR4(KTR_BUF, "getblk(%p, %ld, %d) = %p", vp, (long)blkno, size, bp);
|
|
KASSERT(BUF_REFCNT(bp) == 1, ("getblk: bp %p not locked",bp));
|
|
KASSERT(bp->b_bufobj == bo,
|
|
("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo));
|
|
return (bp);
|
|
}
|
|
|
|
/*
|
|
* Get an empty, disassociated buffer of given size. The buffer is initially
|
|
* set to B_INVAL.
|
|
*/
|
|
struct buf *
|
|
geteblk(int size)
|
|
{
|
|
struct buf *bp;
|
|
int maxsize;
|
|
|
|
maxsize = (size + BKVAMASK) & ~BKVAMASK;
|
|
while ((bp = getnewbuf(0, 0, size, maxsize)) == 0)
|
|
continue;
|
|
allocbuf(bp, size);
|
|
bp->b_flags |= B_INVAL; /* b_dep cleared by getnewbuf() */
|
|
KASSERT(BUF_REFCNT(bp) == 1, ("geteblk: bp %p not locked",bp));
|
|
return (bp);
|
|
}
|
|
|
|
|
|
/*
|
|
* This code constitutes the buffer memory from either anonymous system
|
|
* memory (in the case of non-VMIO operations) or from an associated
|
|
* VM object (in the case of VMIO operations). This code is able to
|
|
* resize a buffer up or down.
|
|
*
|
|
* Note that this code is tricky, and has many complications to resolve
|
|
* deadlock or inconsistant data situations. Tread lightly!!!
|
|
* There are B_CACHE and B_DELWRI interactions that must be dealt with by
|
|
* the caller. Calling this code willy nilly can result in the loss of data.
|
|
*
|
|
* allocbuf() only adjusts B_CACHE for VMIO buffers. getblk() deals with
|
|
* B_CACHE for the non-VMIO case.
|
|
*/
|
|
|
|
int
|
|
allocbuf(struct buf *bp, int size)
|
|
{
|
|
int newbsize, mbsize;
|
|
int i;
|
|
|
|
if (BUF_REFCNT(bp) == 0)
|
|
panic("allocbuf: buffer not busy");
|
|
|
|
if (bp->b_kvasize < size)
|
|
panic("allocbuf: buffer too small");
|
|
|
|
if ((bp->b_flags & B_VMIO) == 0) {
|
|
caddr_t origbuf;
|
|
int origbufsize;
|
|
/*
|
|
* Just get anonymous memory from the kernel. Don't
|
|
* mess with B_CACHE.
|
|
*/
|
|
mbsize = (size + DEV_BSIZE - 1) & ~(DEV_BSIZE - 1);
|
|
if (bp->b_flags & B_MALLOC)
|
|
newbsize = mbsize;
|
|
else
|
|
newbsize = round_page(size);
|
|
|
|
if (newbsize < bp->b_bufsize) {
|
|
/*
|
|
* malloced buffers are not shrunk
|
|
*/
|
|
if (bp->b_flags & B_MALLOC) {
|
|
if (newbsize) {
|
|
bp->b_bcount = size;
|
|
} else {
|
|
free(bp->b_data, M_BIOBUF);
|
|
if (bp->b_bufsize) {
|
|
atomic_subtract_int(
|
|
&bufmallocspace,
|
|
bp->b_bufsize);
|
|
bufspacewakeup();
|
|
bp->b_bufsize = 0;
|
|
}
|
|
bp->b_saveaddr = bp->b_kvabase;
|
|
bp->b_data = bp->b_saveaddr;
|
|
bp->b_bcount = 0;
|
|
bp->b_flags &= ~B_MALLOC;
|
|
}
|
|
return 1;
|
|
}
|
|
vm_hold_free_pages(
|
|
bp,
|
|
(vm_offset_t) bp->b_data + newbsize,
|
|
(vm_offset_t) bp->b_data + bp->b_bufsize);
|
|
} else if (newbsize > bp->b_bufsize) {
|
|
/*
|
|
* We only use malloced memory on the first allocation.
|
|
* and revert to page-allocated memory when the buffer
|
|
* grows.
|
|
*/
|
|
/*
|
|
* There is a potential smp race here that could lead
|
|
* to bufmallocspace slightly passing the max. It
|
|
* is probably extremely rare and not worth worrying
|
|
* over.
|
|
*/
|
|
if ( (bufmallocspace < maxbufmallocspace) &&
|
|
(bp->b_bufsize == 0) &&
|
|
(mbsize <= PAGE_SIZE/2)) {
|
|
|
|
bp->b_data = malloc(mbsize, M_BIOBUF, M_WAITOK);
|
|
bp->b_bufsize = mbsize;
|
|
bp->b_bcount = size;
|
|
bp->b_flags |= B_MALLOC;
|
|
atomic_add_int(&bufmallocspace, mbsize);
|
|
return 1;
|
|
}
|
|
origbuf = NULL;
|
|
origbufsize = 0;
|
|
/*
|
|
* If the buffer is growing on its other-than-first allocation,
|
|
* then we revert to the page-allocation scheme.
|
|
*/
|
|
if (bp->b_flags & B_MALLOC) {
|
|
origbuf = bp->b_data;
|
|
origbufsize = bp->b_bufsize;
|
|
bp->b_data = bp->b_kvabase;
|
|
if (bp->b_bufsize) {
|
|
atomic_subtract_int(&bufmallocspace,
|
|
bp->b_bufsize);
|
|
bufspacewakeup();
|
|
bp->b_bufsize = 0;
|
|
}
|
|
bp->b_flags &= ~B_MALLOC;
|
|
newbsize = round_page(newbsize);
|
|
}
|
|
vm_hold_load_pages(
|
|
bp,
|
|
(vm_offset_t) bp->b_data + bp->b_bufsize,
|
|
(vm_offset_t) bp->b_data + newbsize);
|
|
if (origbuf) {
|
|
bcopy(origbuf, bp->b_data, origbufsize);
|
|
free(origbuf, M_BIOBUF);
|
|
}
|
|
}
|
|
} else {
|
|
int desiredpages;
|
|
|
|
newbsize = (size + DEV_BSIZE - 1) & ~(DEV_BSIZE - 1);
|
|
desiredpages = (size == 0) ? 0 :
|
|
num_pages((bp->b_offset & PAGE_MASK) + newbsize);
|
|
|
|
if (bp->b_flags & B_MALLOC)
|
|
panic("allocbuf: VMIO buffer can't be malloced");
|
|
/*
|
|
* Set B_CACHE initially if buffer is 0 length or will become
|
|
* 0-length.
|
|
*/
|
|
if (size == 0 || bp->b_bufsize == 0)
|
|
bp->b_flags |= B_CACHE;
|
|
|
|
if (newbsize < bp->b_bufsize) {
|
|
/*
|
|
* DEV_BSIZE aligned new buffer size is less then the
|
|
* DEV_BSIZE aligned existing buffer size. Figure out
|
|
* if we have to remove any pages.
|
|
*/
|
|
if (desiredpages < bp->b_npages) {
|
|
vm_page_t m;
|
|
|
|
VM_OBJECT_LOCK(bp->b_bufobj->bo_object);
|
|
vm_page_lock_queues();
|
|
for (i = desiredpages; i < bp->b_npages; i++) {
|
|
/*
|
|
* the page is not freed here -- it
|
|
* is the responsibility of
|
|
* vnode_pager_setsize
|
|
*/
|
|
m = bp->b_pages[i];
|
|
KASSERT(m != bogus_page,
|
|
("allocbuf: bogus page found"));
|
|
while (vm_page_sleep_if_busy(m, TRUE, "biodep"))
|
|
vm_page_lock_queues();
|
|
|
|
bp->b_pages[i] = NULL;
|
|
vm_page_unwire(m, 0);
|
|
}
|
|
vm_page_unlock_queues();
|
|
VM_OBJECT_UNLOCK(bp->b_bufobj->bo_object);
|
|
pmap_qremove((vm_offset_t) trunc_page((vm_offset_t)bp->b_data) +
|
|
(desiredpages << PAGE_SHIFT), (bp->b_npages - desiredpages));
|
|
bp->b_npages = desiredpages;
|
|
}
|
|
} else if (size > bp->b_bcount) {
|
|
/*
|
|
* We are growing the buffer, possibly in a
|
|
* byte-granular fashion.
|
|
*/
|
|
struct vnode *vp;
|
|
vm_object_t obj;
|
|
vm_offset_t toff;
|
|
vm_offset_t tinc;
|
|
|
|
/*
|
|
* Step 1, bring in the VM pages from the object,
|
|
* allocating them if necessary. We must clear
|
|
* B_CACHE if these pages are not valid for the
|
|
* range covered by the buffer.
|
|
*/
|
|
|
|
vp = bp->b_vp;
|
|
obj = bp->b_bufobj->bo_object;
|
|
|
|
VM_OBJECT_LOCK(obj);
|
|
while (bp->b_npages < desiredpages) {
|
|
vm_page_t m;
|
|
vm_pindex_t pi;
|
|
|
|
pi = OFF_TO_IDX(bp->b_offset) + bp->b_npages;
|
|
if ((m = vm_page_lookup(obj, pi)) == NULL) {
|
|
/*
|
|
* note: must allocate system pages
|
|
* since blocking here could intefere
|
|
* with paging I/O, no matter which
|
|
* process we are.
|
|
*/
|
|
m = vm_page_alloc(obj, pi,
|
|
VM_ALLOC_NOBUSY | VM_ALLOC_SYSTEM |
|
|
VM_ALLOC_WIRED);
|
|
if (m == NULL) {
|
|
atomic_add_int(&vm_pageout_deficit,
|
|
desiredpages - bp->b_npages);
|
|
VM_OBJECT_UNLOCK(obj);
|
|
VM_WAIT;
|
|
VM_OBJECT_LOCK(obj);
|
|
} else {
|
|
bp->b_flags &= ~B_CACHE;
|
|
bp->b_pages[bp->b_npages] = m;
|
|
++bp->b_npages;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* We found a page. If we have to sleep on it,
|
|
* retry because it might have gotten freed out
|
|
* from under us.
|
|
*
|
|
* We can only test PG_BUSY here. Blocking on
|
|
* m->busy might lead to a deadlock:
|
|
*
|
|
* vm_fault->getpages->cluster_read->allocbuf
|
|
*
|
|
*/
|
|
vm_page_lock_queues();
|
|
if (vm_page_sleep_if_busy(m, FALSE, "pgtblk"))
|
|
continue;
|
|
|
|
/*
|
|
* We have a good page. Should we wakeup the
|
|
* page daemon?
|
|
*/
|
|
if ((curproc != pageproc) &&
|
|
((m->queue - m->pc) == PQ_CACHE) &&
|
|
((cnt.v_free_count + cnt.v_cache_count) <
|
|
(cnt.v_free_min + cnt.v_cache_min))) {
|
|
pagedaemon_wakeup();
|
|
}
|
|
vm_page_wire(m);
|
|
vm_page_unlock_queues();
|
|
bp->b_pages[bp->b_npages] = m;
|
|
++bp->b_npages;
|
|
}
|
|
|
|
/*
|
|
* Step 2. We've loaded the pages into the buffer,
|
|
* we have to figure out if we can still have B_CACHE
|
|
* set. Note that B_CACHE is set according to the
|
|
* byte-granular range ( bcount and size ), new the
|
|
* aligned range ( newbsize ).
|
|
*
|
|
* The VM test is against m->valid, which is DEV_BSIZE
|
|
* aligned. Needless to say, the validity of the data
|
|
* needs to also be DEV_BSIZE aligned. Note that this
|
|
* fails with NFS if the server or some other client
|
|
* extends the file's EOF. If our buffer is resized,
|
|
* B_CACHE may remain set! XXX
|
|
*/
|
|
|
|
toff = bp->b_bcount;
|
|
tinc = PAGE_SIZE - ((bp->b_offset + toff) & PAGE_MASK);
|
|
|
|
while ((bp->b_flags & B_CACHE) && toff < size) {
|
|
vm_pindex_t pi;
|
|
|
|
if (tinc > (size - toff))
|
|
tinc = size - toff;
|
|
|
|
pi = ((bp->b_offset & PAGE_MASK) + toff) >>
|
|
PAGE_SHIFT;
|
|
|
|
vfs_buf_test_cache(
|
|
bp,
|
|
bp->b_offset,
|
|
toff,
|
|
tinc,
|
|
bp->b_pages[pi]
|
|
);
|
|
toff += tinc;
|
|
tinc = PAGE_SIZE;
|
|
}
|
|
VM_OBJECT_UNLOCK(obj);
|
|
|
|
/*
|
|
* Step 3, fixup the KVM pmap. Remember that
|
|
* bp->b_data is relative to bp->b_offset, but
|
|
* bp->b_offset may be offset into the first page.
|
|
*/
|
|
|
|
bp->b_data = (caddr_t)
|
|
trunc_page((vm_offset_t)bp->b_data);
|
|
pmap_qenter(
|
|
(vm_offset_t)bp->b_data,
|
|
bp->b_pages,
|
|
bp->b_npages
|
|
);
|
|
|
|
bp->b_data = (caddr_t)((vm_offset_t)bp->b_data |
|
|
(vm_offset_t)(bp->b_offset & PAGE_MASK));
|
|
}
|
|
}
|
|
if (newbsize < bp->b_bufsize)
|
|
bufspacewakeup();
|
|
bp->b_bufsize = newbsize; /* actual buffer allocation */
|
|
bp->b_bcount = size; /* requested buffer size */
|
|
return 1;
|
|
}
|
|
|
|
void
|
|
biodone(struct bio *bp)
|
|
{
|
|
void (*done)(struct bio *);
|
|
|
|
mtx_lock(&bdonelock);
|
|
bp->bio_flags |= BIO_DONE;
|
|
done = bp->bio_done;
|
|
if (done == NULL)
|
|
wakeup(bp);
|
|
mtx_unlock(&bdonelock);
|
|
if (done != NULL)
|
|
done(bp);
|
|
}
|
|
|
|
/*
|
|
* Wait for a BIO to finish.
|
|
*
|
|
* XXX: resort to a timeout for now. The optimal locking (if any) for this
|
|
* case is not yet clear.
|
|
*/
|
|
int
|
|
biowait(struct bio *bp, const char *wchan)
|
|
{
|
|
|
|
mtx_lock(&bdonelock);
|
|
while ((bp->bio_flags & BIO_DONE) == 0)
|
|
msleep(bp, &bdonelock, PRIBIO, wchan, hz / 10);
|
|
mtx_unlock(&bdonelock);
|
|
if (bp->bio_error != 0)
|
|
return (bp->bio_error);
|
|
if (!(bp->bio_flags & BIO_ERROR))
|
|
return (0);
|
|
return (EIO);
|
|
}
|
|
|
|
void
|
|
biofinish(struct bio *bp, struct devstat *stat, int error)
|
|
{
|
|
|
|
if (error) {
|
|
bp->bio_error = error;
|
|
bp->bio_flags |= BIO_ERROR;
|
|
}
|
|
if (stat != NULL)
|
|
devstat_end_transaction_bio(stat, bp);
|
|
biodone(bp);
|
|
}
|
|
|
|
/*
|
|
* bufwait:
|
|
*
|
|
* Wait for buffer I/O completion, returning error status. The buffer
|
|
* is left locked and B_DONE on return. B_EINTR is converted into an EINTR
|
|
* error and cleared.
|
|
*/
|
|
int
|
|
bufwait(struct buf *bp)
|
|
{
|
|
if (bp->b_iocmd == BIO_READ)
|
|
bwait(bp, PRIBIO, "biord");
|
|
else
|
|
bwait(bp, PRIBIO, "biowr");
|
|
if (bp->b_flags & B_EINTR) {
|
|
bp->b_flags &= ~B_EINTR;
|
|
return (EINTR);
|
|
}
|
|
if (bp->b_ioflags & BIO_ERROR) {
|
|
return (bp->b_error ? bp->b_error : EIO);
|
|
} else {
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Call back function from struct bio back up to struct buf.
|
|
*/
|
|
static void
|
|
bufdonebio(struct bio *bip)
|
|
{
|
|
struct buf *bp;
|
|
|
|
bp = bip->bio_caller2;
|
|
bp->b_resid = bp->b_bcount - bip->bio_completed;
|
|
bp->b_resid = bip->bio_resid; /* XXX: remove */
|
|
bp->b_ioflags = bip->bio_flags;
|
|
bp->b_error = bip->bio_error;
|
|
if (bp->b_error)
|
|
bp->b_ioflags |= BIO_ERROR;
|
|
bufdone(bp);
|
|
g_destroy_bio(bip);
|
|
}
|
|
|
|
void
|
|
dev_strategy(struct cdev *dev, struct buf *bp)
|
|
{
|
|
struct cdevsw *csw;
|
|
struct bio *bip;
|
|
|
|
if ((!bp->b_iocmd) || (bp->b_iocmd & (bp->b_iocmd - 1)))
|
|
panic("b_iocmd botch");
|
|
for (;;) {
|
|
bip = g_new_bio();
|
|
if (bip != NULL)
|
|
break;
|
|
/* Try again later */
|
|
tsleep(&bp, PRIBIO, "dev_strat", hz/10);
|
|
}
|
|
bip->bio_cmd = bp->b_iocmd;
|
|
bip->bio_offset = bp->b_iooffset;
|
|
bip->bio_length = bp->b_bcount;
|
|
bip->bio_bcount = bp->b_bcount; /* XXX: remove */
|
|
bip->bio_data = bp->b_data;
|
|
bip->bio_done = bufdonebio;
|
|
bip->bio_caller2 = bp;
|
|
bip->bio_dev = dev;
|
|
KASSERT(dev->si_refcount > 0,
|
|
("dev_strategy on un-referenced struct cdev *(%s)",
|
|
devtoname(dev)));
|
|
csw = dev_refthread(dev);
|
|
if (csw == NULL) {
|
|
bp->b_error = ENXIO;
|
|
bp->b_ioflags = BIO_ERROR;
|
|
bufdone(bp);
|
|
return;
|
|
}
|
|
(*csw->d_strategy)(bip);
|
|
dev_relthread(dev);
|
|
}
|
|
|
|
/*
|
|
* bufdone:
|
|
*
|
|
* Finish I/O on a buffer, optionally calling a completion function.
|
|
* This is usually called from an interrupt so process blocking is
|
|
* not allowed.
|
|
*
|
|
* biodone is also responsible for setting B_CACHE in a B_VMIO bp.
|
|
* In a non-VMIO bp, B_CACHE will be set on the next getblk()
|
|
* assuming B_INVAL is clear.
|
|
*
|
|
* For the VMIO case, we set B_CACHE if the op was a read and no
|
|
* read error occured, or if the op was a write. B_CACHE is never
|
|
* set if the buffer is invalid or otherwise uncacheable.
|
|
*
|
|
* biodone does not mess with B_INVAL, allowing the I/O routine or the
|
|
* initiator to leave B_INVAL set to brelse the buffer out of existance
|
|
* in the biodone routine.
|
|
*/
|
|
void
|
|
bufdone(struct buf *bp)
|
|
{
|
|
struct bufobj *dropobj;
|
|
void (*biodone)(struct buf *);
|
|
|
|
|
|
CTR3(KTR_BUF, "bufdone(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
|
|
dropobj = NULL;
|
|
|
|
KASSERT(BUF_REFCNT(bp) > 0, ("biodone: bp %p not busy %d", bp, BUF_REFCNT(bp)));
|
|
KASSERT(!(bp->b_flags & B_DONE), ("biodone: bp %p already done", bp));
|
|
|
|
runningbufwakeup(bp);
|
|
if (bp->b_iocmd == BIO_WRITE)
|
|
dropobj = bp->b_bufobj;
|
|
/* call optional completion function if requested */
|
|
if (bp->b_iodone != NULL) {
|
|
biodone = bp->b_iodone;
|
|
bp->b_iodone = NULL;
|
|
(*biodone) (bp);
|
|
if (dropobj)
|
|
bufobj_wdrop(dropobj);
|
|
return;
|
|
}
|
|
if (LIST_FIRST(&bp->b_dep) != NULL)
|
|
buf_complete(bp);
|
|
|
|
if (bp->b_flags & B_VMIO) {
|
|
int i;
|
|
vm_ooffset_t foff;
|
|
vm_page_t m;
|
|
vm_object_t obj;
|
|
int iosize;
|
|
struct vnode *vp = bp->b_vp;
|
|
|
|
obj = bp->b_bufobj->bo_object;
|
|
|
|
#if defined(VFS_BIO_DEBUG)
|
|
mp_fixme("usecount and vflag accessed without locks.");
|
|
if (vp->v_usecount == 0) {
|
|
panic("biodone: zero vnode ref count");
|
|
}
|
|
|
|
KASSERT(vp->v_object != NULL,
|
|
("biodone: vnode %p has no vm_object", vp));
|
|
#endif
|
|
|
|
foff = bp->b_offset;
|
|
KASSERT(bp->b_offset != NOOFFSET,
|
|
("biodone: no buffer offset"));
|
|
|
|
VM_OBJECT_LOCK(obj);
|
|
#if defined(VFS_BIO_DEBUG)
|
|
if (obj->paging_in_progress < bp->b_npages) {
|
|
printf("biodone: paging in progress(%d) < bp->b_npages(%d)\n",
|
|
obj->paging_in_progress, bp->b_npages);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Set B_CACHE if the op was a normal read and no error
|
|
* occured. B_CACHE is set for writes in the b*write()
|
|
* routines.
|
|
*/
|
|
iosize = bp->b_bcount - bp->b_resid;
|
|
if (bp->b_iocmd == BIO_READ &&
|
|
!(bp->b_flags & (B_INVAL|B_NOCACHE)) &&
|
|
!(bp->b_ioflags & BIO_ERROR)) {
|
|
bp->b_flags |= B_CACHE;
|
|
}
|
|
vm_page_lock_queues();
|
|
for (i = 0; i < bp->b_npages; i++) {
|
|
int bogusflag = 0;
|
|
int resid;
|
|
|
|
resid = ((foff + PAGE_SIZE) & ~(off_t)PAGE_MASK) - foff;
|
|
if (resid > iosize)
|
|
resid = iosize;
|
|
|
|
/*
|
|
* cleanup bogus pages, restoring the originals
|
|
*/
|
|
m = bp->b_pages[i];
|
|
if (m == bogus_page) {
|
|
bogusflag = 1;
|
|
m = vm_page_lookup(obj, OFF_TO_IDX(foff));
|
|
if (m == NULL)
|
|
panic("biodone: page disappeared!");
|
|
bp->b_pages[i] = m;
|
|
pmap_qenter(trunc_page((vm_offset_t)bp->b_data), bp->b_pages, bp->b_npages);
|
|
}
|
|
#if defined(VFS_BIO_DEBUG)
|
|
if (OFF_TO_IDX(foff) != m->pindex) {
|
|
printf(
|
|
"biodone: foff(%jd)/m->pindex(%ju) mismatch\n",
|
|
(intmax_t)foff, (uintmax_t)m->pindex);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* In the write case, the valid and clean bits are
|
|
* already changed correctly ( see bdwrite() ), so we
|
|
* only need to do this here in the read case.
|
|
*/
|
|
if ((bp->b_iocmd == BIO_READ) && !bogusflag && resid > 0) {
|
|
vfs_page_set_valid(bp, foff, i, m);
|
|
}
|
|
|
|
/*
|
|
* when debugging new filesystems or buffer I/O methods, this
|
|
* is the most common error that pops up. if you see this, you
|
|
* have not set the page busy flag correctly!!!
|
|
*/
|
|
if (m->busy == 0) {
|
|
printf("biodone: page busy < 0, "
|
|
"pindex: %d, foff: 0x(%x,%x), "
|
|
"resid: %d, index: %d\n",
|
|
(int) m->pindex, (int)(foff >> 32),
|
|
(int) foff & 0xffffffff, resid, i);
|
|
if (!vn_isdisk(vp, NULL))
|
|
printf(" iosize: %jd, lblkno: %jd, flags: 0x%x, npages: %d\n",
|
|
(intmax_t)bp->b_vp->v_mount->mnt_stat.f_iosize,
|
|
(intmax_t) bp->b_lblkno,
|
|
bp->b_flags, bp->b_npages);
|
|
else
|
|
printf(" VDEV, lblkno: %jd, flags: 0x%x, npages: %d\n",
|
|
(intmax_t) bp->b_lblkno,
|
|
bp->b_flags, bp->b_npages);
|
|
printf(" valid: 0x%lx, dirty: 0x%lx, wired: %d\n",
|
|
(u_long)m->valid, (u_long)m->dirty,
|
|
m->wire_count);
|
|
panic("biodone: page busy < 0\n");
|
|
}
|
|
vm_page_io_finish(m);
|
|
vm_object_pip_subtract(obj, 1);
|
|
foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
|
|
iosize -= resid;
|
|
}
|
|
vm_page_unlock_queues();
|
|
vm_object_pip_wakeupn(obj, 0);
|
|
VM_OBJECT_UNLOCK(obj);
|
|
}
|
|
|
|
/*
|
|
* For asynchronous completions, release the buffer now. The brelse
|
|
* will do a wakeup there if necessary - so no need to do a wakeup
|
|
* here in the async case. The sync case always needs to do a wakeup.
|
|
*/
|
|
|
|
if (bp->b_flags & B_ASYNC) {
|
|
if ((bp->b_flags & (B_NOCACHE | B_INVAL | B_RELBUF)) || (bp->b_ioflags & BIO_ERROR))
|
|
brelse(bp);
|
|
else
|
|
bqrelse(bp);
|
|
} else
|
|
bdone(bp);
|
|
if (dropobj)
|
|
bufobj_wdrop(dropobj);
|
|
}
|
|
|
|
/*
|
|
* This routine is called in lieu of iodone in the case of
|
|
* incomplete I/O. This keeps the busy status for pages
|
|
* consistant.
|
|
*/
|
|
void
|
|
vfs_unbusy_pages(struct buf *bp)
|
|
{
|
|
int i;
|
|
vm_object_t obj;
|
|
vm_page_t m;
|
|
|
|
runningbufwakeup(bp);
|
|
if (!(bp->b_flags & B_VMIO))
|
|
return;
|
|
|
|
obj = bp->b_bufobj->bo_object;
|
|
VM_OBJECT_LOCK(obj);
|
|
vm_page_lock_queues();
|
|
for (i = 0; i < bp->b_npages; i++) {
|
|
m = bp->b_pages[i];
|
|
if (m == bogus_page) {
|
|
m = vm_page_lookup(obj, OFF_TO_IDX(bp->b_offset) + i);
|
|
if (!m)
|
|
panic("vfs_unbusy_pages: page missing\n");
|
|
bp->b_pages[i] = m;
|
|
pmap_qenter(trunc_page((vm_offset_t)bp->b_data),
|
|
bp->b_pages, bp->b_npages);
|
|
}
|
|
vm_object_pip_subtract(obj, 1);
|
|
vm_page_io_finish(m);
|
|
}
|
|
vm_page_unlock_queues();
|
|
vm_object_pip_wakeupn(obj, 0);
|
|
VM_OBJECT_UNLOCK(obj);
|
|
}
|
|
|
|
/*
|
|
* vfs_page_set_valid:
|
|
*
|
|
* Set the valid bits in a page based on the supplied offset. The
|
|
* range is restricted to the buffer's size.
|
|
*
|
|
* This routine is typically called after a read completes.
|
|
*/
|
|
static void
|
|
vfs_page_set_valid(struct buf *bp, vm_ooffset_t off, int pageno, vm_page_t m)
|
|
{
|
|
vm_ooffset_t soff, eoff;
|
|
|
|
mtx_assert(&vm_page_queue_mtx, MA_OWNED);
|
|
/*
|
|
* Start and end offsets in buffer. eoff - soff may not cross a
|
|
* page boundry or cross the end of the buffer. The end of the
|
|
* buffer, in this case, is our file EOF, not the allocation size
|
|
* of the buffer.
|
|
*/
|
|
soff = off;
|
|
eoff = (off + PAGE_SIZE) & ~(off_t)PAGE_MASK;
|
|
if (eoff > bp->b_offset + bp->b_bcount)
|
|
eoff = bp->b_offset + bp->b_bcount;
|
|
|
|
/*
|
|
* Set valid range. This is typically the entire buffer and thus the
|
|
* entire page.
|
|
*/
|
|
if (eoff > soff) {
|
|
vm_page_set_validclean(
|
|
m,
|
|
(vm_offset_t) (soff & PAGE_MASK),
|
|
(vm_offset_t) (eoff - soff)
|
|
);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This routine is called before a device strategy routine.
|
|
* It is used to tell the VM system that paging I/O is in
|
|
* progress, and treat the pages associated with the buffer
|
|
* almost as being PG_BUSY. Also the object paging_in_progress
|
|
* flag is handled to make sure that the object doesn't become
|
|
* inconsistant.
|
|
*
|
|
* Since I/O has not been initiated yet, certain buffer flags
|
|
* such as BIO_ERROR or B_INVAL may be in an inconsistant state
|
|
* and should be ignored.
|
|
*/
|
|
void
|
|
vfs_busy_pages(struct buf *bp, int clear_modify)
|
|
{
|
|
int i, bogus;
|
|
vm_object_t obj;
|
|
vm_ooffset_t foff;
|
|
vm_page_t m;
|
|
|
|
if (!(bp->b_flags & B_VMIO))
|
|
return;
|
|
|
|
obj = bp->b_bufobj->bo_object;
|
|
foff = bp->b_offset;
|
|
KASSERT(bp->b_offset != NOOFFSET,
|
|
("vfs_busy_pages: no buffer offset"));
|
|
vfs_setdirty(bp);
|
|
VM_OBJECT_LOCK(obj);
|
|
retry:
|
|
vm_page_lock_queues();
|
|
for (i = 0; i < bp->b_npages; i++) {
|
|
m = bp->b_pages[i];
|
|
|
|
if (vm_page_sleep_if_busy(m, FALSE, "vbpage"))
|
|
goto retry;
|
|
}
|
|
bogus = 0;
|
|
for (i = 0; i < bp->b_npages; i++) {
|
|
m = bp->b_pages[i];
|
|
|
|
if ((bp->b_flags & B_CLUSTER) == 0) {
|
|
vm_object_pip_add(obj, 1);
|
|
vm_page_io_start(m);
|
|
}
|
|
/*
|
|
* When readying a buffer for a read ( i.e
|
|
* clear_modify == 0 ), it is important to do
|
|
* bogus_page replacement for valid pages in
|
|
* partially instantiated buffers. Partially
|
|
* instantiated buffers can, in turn, occur when
|
|
* reconstituting a buffer from its VM backing store
|
|
* base. We only have to do this if B_CACHE is
|
|
* clear ( which causes the I/O to occur in the
|
|
* first place ). The replacement prevents the read
|
|
* I/O from overwriting potentially dirty VM-backed
|
|
* pages. XXX bogus page replacement is, uh, bogus.
|
|
* It may not work properly with small-block devices.
|
|
* We need to find a better way.
|
|
*/
|
|
pmap_remove_all(m);
|
|
if (clear_modify)
|
|
vfs_page_set_valid(bp, foff, i, m);
|
|
else if (m->valid == VM_PAGE_BITS_ALL &&
|
|
(bp->b_flags & B_CACHE) == 0) {
|
|
bp->b_pages[i] = bogus_page;
|
|
bogus++;
|
|
}
|
|
foff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
|
|
}
|
|
vm_page_unlock_queues();
|
|
VM_OBJECT_UNLOCK(obj);
|
|
if (bogus)
|
|
pmap_qenter(trunc_page((vm_offset_t)bp->b_data),
|
|
bp->b_pages, bp->b_npages);
|
|
}
|
|
|
|
/*
|
|
* Tell the VM system that the pages associated with this buffer
|
|
* are clean. This is used for delayed writes where the data is
|
|
* going to go to disk eventually without additional VM intevention.
|
|
*
|
|
* Note that while we only really need to clean through to b_bcount, we
|
|
* just go ahead and clean through to b_bufsize.
|
|
*/
|
|
static void
|
|
vfs_clean_pages(struct buf *bp)
|
|
{
|
|
int i;
|
|
vm_ooffset_t foff, noff, eoff;
|
|
vm_page_t m;
|
|
|
|
if (!(bp->b_flags & B_VMIO))
|
|
return;
|
|
|
|
foff = bp->b_offset;
|
|
KASSERT(bp->b_offset != NOOFFSET,
|
|
("vfs_clean_pages: no buffer offset"));
|
|
VM_OBJECT_LOCK(bp->b_bufobj->bo_object);
|
|
vm_page_lock_queues();
|
|
for (i = 0; i < bp->b_npages; i++) {
|
|
m = bp->b_pages[i];
|
|
noff = (foff + PAGE_SIZE) & ~(off_t)PAGE_MASK;
|
|
eoff = noff;
|
|
|
|
if (eoff > bp->b_offset + bp->b_bufsize)
|
|
eoff = bp->b_offset + bp->b_bufsize;
|
|
vfs_page_set_valid(bp, foff, i, m);
|
|
/* vm_page_clear_dirty(m, foff & PAGE_MASK, eoff - foff); */
|
|
foff = noff;
|
|
}
|
|
vm_page_unlock_queues();
|
|
VM_OBJECT_UNLOCK(bp->b_bufobj->bo_object);
|
|
}
|
|
|
|
/*
|
|
* vfs_bio_set_validclean:
|
|
*
|
|
* Set the range within the buffer to valid and clean. The range is
|
|
* relative to the beginning of the buffer, b_offset. Note that b_offset
|
|
* itself may be offset from the beginning of the first page.
|
|
*
|
|
*/
|
|
|
|
void
|
|
vfs_bio_set_validclean(struct buf *bp, int base, int size)
|
|
{
|
|
int i, n;
|
|
vm_page_t m;
|
|
|
|
if (!(bp->b_flags & B_VMIO))
|
|
return;
|
|
/*
|
|
* Fixup base to be relative to beginning of first page.
|
|
* Set initial n to be the maximum number of bytes in the
|
|
* first page that can be validated.
|
|
*/
|
|
|
|
base += (bp->b_offset & PAGE_MASK);
|
|
n = PAGE_SIZE - (base & PAGE_MASK);
|
|
|
|
VM_OBJECT_LOCK(bp->b_bufobj->bo_object);
|
|
vm_page_lock_queues();
|
|
for (i = base / PAGE_SIZE; size > 0 && i < bp->b_npages; ++i) {
|
|
m = bp->b_pages[i];
|
|
if (n > size)
|
|
n = size;
|
|
vm_page_set_validclean(m, base & PAGE_MASK, n);
|
|
base += n;
|
|
size -= n;
|
|
n = PAGE_SIZE;
|
|
}
|
|
vm_page_unlock_queues();
|
|
VM_OBJECT_UNLOCK(bp->b_bufobj->bo_object);
|
|
}
|
|
|
|
/*
|
|
* vfs_bio_clrbuf:
|
|
*
|
|
* clear a buffer. This routine essentially fakes an I/O, so we need
|
|
* to clear BIO_ERROR and B_INVAL.
|
|
*
|
|
* Note that while we only theoretically need to clear through b_bcount,
|
|
* we go ahead and clear through b_bufsize.
|
|
*/
|
|
|
|
void
|
|
vfs_bio_clrbuf(struct buf *bp)
|
|
{
|
|
int i, j, mask = 0;
|
|
caddr_t sa, ea;
|
|
|
|
if ((bp->b_flags & (B_VMIO | B_MALLOC)) != B_VMIO) {
|
|
clrbuf(bp);
|
|
return;
|
|
}
|
|
|
|
bp->b_flags &= ~B_INVAL;
|
|
bp->b_ioflags &= ~BIO_ERROR;
|
|
VM_OBJECT_LOCK(bp->b_bufobj->bo_object);
|
|
if ((bp->b_npages == 1) && (bp->b_bufsize < PAGE_SIZE) &&
|
|
(bp->b_offset & PAGE_MASK) == 0) {
|
|
if (bp->b_pages[0] == bogus_page)
|
|
goto unlock;
|
|
mask = (1 << (bp->b_bufsize / DEV_BSIZE)) - 1;
|
|
VM_OBJECT_LOCK_ASSERT(bp->b_pages[0]->object, MA_OWNED);
|
|
if ((bp->b_pages[0]->valid & mask) == mask)
|
|
goto unlock;
|
|
if (((bp->b_pages[0]->flags & PG_ZERO) == 0) &&
|
|
((bp->b_pages[0]->valid & mask) == 0)) {
|
|
bzero(bp->b_data, bp->b_bufsize);
|
|
bp->b_pages[0]->valid |= mask;
|
|
goto unlock;
|
|
}
|
|
}
|
|
ea = sa = bp->b_data;
|
|
for(i = 0; i < bp->b_npages; i++, sa = ea) {
|
|
ea = (caddr_t)trunc_page((vm_offset_t)sa + PAGE_SIZE);
|
|
ea = (caddr_t)(vm_offset_t)ulmin(
|
|
(u_long)(vm_offset_t)ea,
|
|
(u_long)(vm_offset_t)bp->b_data + bp->b_bufsize);
|
|
if (bp->b_pages[i] == bogus_page)
|
|
continue;
|
|
j = ((vm_offset_t)sa & PAGE_MASK) / DEV_BSIZE;
|
|
mask = ((1 << ((ea - sa) / DEV_BSIZE)) - 1) << j;
|
|
VM_OBJECT_LOCK_ASSERT(bp->b_pages[i]->object, MA_OWNED);
|
|
if ((bp->b_pages[i]->valid & mask) == mask)
|
|
continue;
|
|
if ((bp->b_pages[i]->valid & mask) == 0) {
|
|
if ((bp->b_pages[i]->flags & PG_ZERO) == 0)
|
|
bzero(sa, ea - sa);
|
|
} else {
|
|
for (; sa < ea; sa += DEV_BSIZE, j++) {
|
|
if (((bp->b_pages[i]->flags & PG_ZERO) == 0) &&
|
|
(bp->b_pages[i]->valid & (1 << j)) == 0)
|
|
bzero(sa, DEV_BSIZE);
|
|
}
|
|
}
|
|
bp->b_pages[i]->valid |= mask;
|
|
}
|
|
unlock:
|
|
VM_OBJECT_UNLOCK(bp->b_bufobj->bo_object);
|
|
bp->b_resid = 0;
|
|
}
|
|
|
|
/*
|
|
* vm_hold_load_pages and vm_hold_free_pages get pages into
|
|
* a buffers address space. The pages are anonymous and are
|
|
* not associated with a file object.
|
|
*/
|
|
static void
|
|
vm_hold_load_pages(struct buf *bp, vm_offset_t from, vm_offset_t to)
|
|
{
|
|
vm_offset_t pg;
|
|
vm_page_t p;
|
|
int index;
|
|
|
|
to = round_page(to);
|
|
from = round_page(from);
|
|
index = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT;
|
|
|
|
VM_OBJECT_LOCK(kernel_object);
|
|
for (pg = from; pg < to; pg += PAGE_SIZE, index++) {
|
|
tryagain:
|
|
/*
|
|
* note: must allocate system pages since blocking here
|
|
* could intefere with paging I/O, no matter which
|
|
* process we are.
|
|
*/
|
|
p = vm_page_alloc(kernel_object,
|
|
((pg - VM_MIN_KERNEL_ADDRESS) >> PAGE_SHIFT),
|
|
VM_ALLOC_NOBUSY | VM_ALLOC_SYSTEM | VM_ALLOC_WIRED);
|
|
if (!p) {
|
|
atomic_add_int(&vm_pageout_deficit,
|
|
(to - pg) >> PAGE_SHIFT);
|
|
VM_OBJECT_UNLOCK(kernel_object);
|
|
VM_WAIT;
|
|
VM_OBJECT_LOCK(kernel_object);
|
|
goto tryagain;
|
|
}
|
|
p->valid = VM_PAGE_BITS_ALL;
|
|
pmap_qenter(pg, &p, 1);
|
|
bp->b_pages[index] = p;
|
|
}
|
|
VM_OBJECT_UNLOCK(kernel_object);
|
|
bp->b_npages = index;
|
|
}
|
|
|
|
/* Return pages associated with this buf to the vm system */
|
|
static void
|
|
vm_hold_free_pages(struct buf *bp, vm_offset_t from, vm_offset_t to)
|
|
{
|
|
vm_offset_t pg;
|
|
vm_page_t p;
|
|
int index, newnpages;
|
|
|
|
from = round_page(from);
|
|
to = round_page(to);
|
|
newnpages = index = (from - trunc_page((vm_offset_t)bp->b_data)) >> PAGE_SHIFT;
|
|
|
|
VM_OBJECT_LOCK(kernel_object);
|
|
for (pg = from; pg < to; pg += PAGE_SIZE, index++) {
|
|
p = bp->b_pages[index];
|
|
if (p && (index < bp->b_npages)) {
|
|
if (p->busy) {
|
|
printf(
|
|
"vm_hold_free_pages: blkno: %jd, lblkno: %jd\n",
|
|
(intmax_t)bp->b_blkno,
|
|
(intmax_t)bp->b_lblkno);
|
|
}
|
|
bp->b_pages[index] = NULL;
|
|
pmap_qremove(pg, 1);
|
|
vm_page_lock_queues();
|
|
vm_page_unwire(p, 0);
|
|
vm_page_free(p);
|
|
vm_page_unlock_queues();
|
|
}
|
|
}
|
|
VM_OBJECT_UNLOCK(kernel_object);
|
|
bp->b_npages = newnpages;
|
|
}
|
|
|
|
/*
|
|
* Map an IO request into kernel virtual address space.
|
|
*
|
|
* All requests are (re)mapped into kernel VA space.
|
|
* Notice that we use b_bufsize for the size of the buffer
|
|
* to be mapped. b_bcount might be modified by the driver.
|
|
*
|
|
* Note that even if the caller determines that the address space should
|
|
* be valid, a race or a smaller-file mapped into a larger space may
|
|
* actually cause vmapbuf() to fail, so all callers of vmapbuf() MUST
|
|
* check the return value.
|
|
*/
|
|
int
|
|
vmapbuf(struct buf *bp)
|
|
{
|
|
caddr_t addr, kva;
|
|
vm_prot_t prot;
|
|
int pidx, i;
|
|
struct vm_page *m;
|
|
struct pmap *pmap = &curproc->p_vmspace->vm_pmap;
|
|
|
|
if (bp->b_bufsize < 0)
|
|
return (-1);
|
|
prot = VM_PROT_READ;
|
|
if (bp->b_iocmd == BIO_READ)
|
|
prot |= VM_PROT_WRITE; /* Less backwards than it looks */
|
|
for (addr = (caddr_t)trunc_page((vm_offset_t)bp->b_data), pidx = 0;
|
|
addr < bp->b_data + bp->b_bufsize;
|
|
addr += PAGE_SIZE, pidx++) {
|
|
/*
|
|
* Do the vm_fault if needed; do the copy-on-write thing
|
|
* when reading stuff off device into memory.
|
|
*
|
|
* NOTE! Must use pmap_extract() because addr may be in
|
|
* the userland address space, and kextract is only guarenteed
|
|
* to work for the kernland address space (see: sparc64 port).
|
|
*/
|
|
retry:
|
|
if (vm_fault_quick(addr >= bp->b_data ? addr : bp->b_data,
|
|
prot) < 0) {
|
|
vm_page_lock_queues();
|
|
for (i = 0; i < pidx; ++i) {
|
|
vm_page_unhold(bp->b_pages[i]);
|
|
bp->b_pages[i] = NULL;
|
|
}
|
|
vm_page_unlock_queues();
|
|
return(-1);
|
|
}
|
|
m = pmap_extract_and_hold(pmap, (vm_offset_t)addr, prot);
|
|
if (m == NULL)
|
|
goto retry;
|
|
bp->b_pages[pidx] = m;
|
|
}
|
|
if (pidx > btoc(MAXPHYS))
|
|
panic("vmapbuf: mapped more than MAXPHYS");
|
|
pmap_qenter((vm_offset_t)bp->b_saveaddr, bp->b_pages, pidx);
|
|
|
|
kva = bp->b_saveaddr;
|
|
bp->b_npages = pidx;
|
|
bp->b_saveaddr = bp->b_data;
|
|
bp->b_data = kva + (((vm_offset_t) bp->b_data) & PAGE_MASK);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Free the io map PTEs associated with this IO operation.
|
|
* We also invalidate the TLB entries and restore the original b_addr.
|
|
*/
|
|
void
|
|
vunmapbuf(struct buf *bp)
|
|
{
|
|
int pidx;
|
|
int npages;
|
|
|
|
npages = bp->b_npages;
|
|
pmap_qremove(trunc_page((vm_offset_t)bp->b_data), npages);
|
|
vm_page_lock_queues();
|
|
for (pidx = 0; pidx < npages; pidx++)
|
|
vm_page_unhold(bp->b_pages[pidx]);
|
|
vm_page_unlock_queues();
|
|
|
|
bp->b_data = bp->b_saveaddr;
|
|
}
|
|
|
|
void
|
|
bdone(struct buf *bp)
|
|
{
|
|
|
|
mtx_lock(&bdonelock);
|
|
bp->b_flags |= B_DONE;
|
|
wakeup(bp);
|
|
mtx_unlock(&bdonelock);
|
|
}
|
|
|
|
void
|
|
bwait(struct buf *bp, u_char pri, const char *wchan)
|
|
{
|
|
|
|
mtx_lock(&bdonelock);
|
|
while ((bp->b_flags & B_DONE) == 0)
|
|
msleep(bp, &bdonelock, pri, wchan, 0);
|
|
mtx_unlock(&bdonelock);
|
|
}
|
|
|
|
int
|
|
bufsync(struct bufobj *bo, int waitfor, struct thread *td)
|
|
{
|
|
|
|
return (VOP_FSYNC(bo->__bo_vnode, waitfor, td));
|
|
}
|
|
|
|
void
|
|
bufstrategy(struct bufobj *bo, struct buf *bp)
|
|
{
|
|
int i = 0;
|
|
struct vnode *vp;
|
|
|
|
vp = bp->b_vp;
|
|
KASSERT(vp == bo->bo_private, ("Inconsistent vnode bufstrategy"));
|
|
KASSERT(vp->v_type != VCHR && vp->v_type != VBLK,
|
|
("Wrong vnode in bufstrategy(bp=%p, vp=%p)", bp, vp));
|
|
i = VOP_STRATEGY(vp, bp);
|
|
KASSERT(i == 0, ("VOP_STRATEGY failed bp=%p vp=%p", bp, bp->b_vp));
|
|
}
|
|
|
|
void
|
|
bufobj_wrefl(struct bufobj *bo)
|
|
{
|
|
|
|
KASSERT(bo != NULL, ("NULL bo in bufobj_wref"));
|
|
ASSERT_BO_LOCKED(bo);
|
|
bo->bo_numoutput++;
|
|
}
|
|
|
|
void
|
|
bufobj_wref(struct bufobj *bo)
|
|
{
|
|
|
|
KASSERT(bo != NULL, ("NULL bo in bufobj_wref"));
|
|
BO_LOCK(bo);
|
|
bo->bo_numoutput++;
|
|
BO_UNLOCK(bo);
|
|
}
|
|
|
|
void
|
|
bufobj_wdrop(struct bufobj *bo)
|
|
{
|
|
|
|
KASSERT(bo != NULL, ("NULL bo in bufobj_wdrop"));
|
|
BO_LOCK(bo);
|
|
KASSERT(bo->bo_numoutput > 0, ("bufobj_wdrop non-positive count"));
|
|
if ((--bo->bo_numoutput == 0) && (bo->bo_flag & BO_WWAIT)) {
|
|
bo->bo_flag &= ~BO_WWAIT;
|
|
wakeup(&bo->bo_numoutput);
|
|
}
|
|
BO_UNLOCK(bo);
|
|
}
|
|
|
|
int
|
|
bufobj_wwait(struct bufobj *bo, int slpflag, int timeo)
|
|
{
|
|
int error;
|
|
|
|
KASSERT(bo != NULL, ("NULL bo in bufobj_wwait"));
|
|
ASSERT_BO_LOCKED(bo);
|
|
error = 0;
|
|
while (bo->bo_numoutput) {
|
|
bo->bo_flag |= BO_WWAIT;
|
|
error = msleep(&bo->bo_numoutput, BO_MTX(bo),
|
|
slpflag | (PRIBIO + 1), "bo_wwait", timeo);
|
|
if (error)
|
|
break;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
#include "opt_ddb.h"
|
|
#ifdef DDB
|
|
#include <ddb/ddb.h>
|
|
|
|
/* DDB command to show buffer data */
|
|
DB_SHOW_COMMAND(buffer, db_show_buffer)
|
|
{
|
|
/* get args */
|
|
struct buf *bp = (struct buf *)addr;
|
|
|
|
if (!have_addr) {
|
|
db_printf("usage: show buffer <addr>\n");
|
|
return;
|
|
}
|
|
|
|
db_printf("buf at %p\n", bp);
|
|
db_printf("b_flags = 0x%b\n", (u_int)bp->b_flags, PRINT_BUF_FLAGS);
|
|
db_printf(
|
|
"b_error = %d, b_bufsize = %ld, b_bcount = %ld, b_resid = %ld\n"
|
|
"b_bufobj = (%p), b_data = %p, b_blkno = %jd\n",
|
|
bp->b_error, bp->b_bufsize, bp->b_bcount, bp->b_resid,
|
|
bp->b_bufobj, bp->b_data, (intmax_t)bp->b_blkno);
|
|
if (bp->b_npages) {
|
|
int i;
|
|
db_printf("b_npages = %d, pages(OBJ, IDX, PA): ", bp->b_npages);
|
|
for (i = 0; i < bp->b_npages; i++) {
|
|
vm_page_t m;
|
|
m = bp->b_pages[i];
|
|
db_printf("(%p, 0x%lx, 0x%lx)", (void *)m->object,
|
|
(u_long)m->pindex, (u_long)VM_PAGE_TO_PHYS(m));
|
|
if ((i + 1) < bp->b_npages)
|
|
db_printf(",");
|
|
}
|
|
db_printf("\n");
|
|
}
|
|
lockmgr_printinfo(&bp->b_lock);
|
|
}
|
|
|
|
DB_SHOW_COMMAND(lockedbufs, lockedbufs)
|
|
{
|
|
struct buf *bp;
|
|
int i;
|
|
|
|
for (i = 0; i < nbuf; i++) {
|
|
bp = &buf[i];
|
|
if (lockcount(&bp->b_lock)) {
|
|
db_show_buffer((uintptr_t)bp, 1, 0, NULL);
|
|
db_printf("\n");
|
|
}
|
|
}
|
|
}
|
|
#endif /* DDB */
|