freebsd-dev/sys/gnu/dts/arm/imx6qdl-microsom-ar8035.dtsi
Warner Losh 3a6a9a3bcc Merge latest (commit c8c1b3a77934768c7f7a4a9c10140c8bec529059) files
from the git tree. This merges a lot that we're not using, but there's
too many files to be selective and have a hope of catching everything.
If there are conflicts with the rest of the tree, we'll resolve them
on a case by case basis.

MFC after:	2 weeks
Sponsored by:	Netflix, Inc.
2015-02-28 00:06:04 +00:00

63 lines
2.0 KiB
Plaintext

/*
* Copyright (C) 2013,2014 Russell King
*
* This describes the hookup for an AR8035 to the iMX6 on the SolidRun
* MicroSOM.
*/
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
phy-mode = "rgmii";
phy-reset-duration = <2>;
phy-reset-gpios = <&gpio4 15 0>;
status = "okay";
};
&iomuxc {
enet {
pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
/* AR8035 reset */
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0
/* AR8035 interrupt */
MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x80000000
/* GPIO16 -> AR8035 25MHz */
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1
/* AR8035 pin strapping: IO voltage: pull up */
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
/* AR8035 pin strapping: PHYADDR#0: pull down */
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030
/* AR8035 pin strapping: PHYADDR#1: pull down */
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030
/* AR8035 pin strapping: MODE#1: pull up */
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
/* AR8035 pin strapping: MODE#3: pull up */
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
/* AR8035 pin strapping: MODE#0: pull down */
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030
/*
* As the RMII pins are also connected to RGMII
* so that an AR8030 can be placed, set these
* to high-z with the same pulls as above.
* Use the GPIO settings to avoid changing the
* input select registers.
*/
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000
>;
};
};
};