freebsd-dev/sys/dev/bxe/bxe_debug.h
David Christensen 76dbe6498b - Major reorganization of mbuf handling throughout the driver to
increase robustness (no more calls to panic(9)) and simplify
  code.
- Allocate RX/TX data structures as a single buffer rather than
  an array of 4KB pages to simplify code.
- Fixed LRO (aka TPA) code.  Removed kernel module parameter and
  support enabling disabling LRO through ifconfig(8) command line.
  LRO is still disabled by default but should be enabled for best
  performance on an endpoint device.
- Fixed statistcs code and removed kernel module parameter (stats
  should just work).
- Added many software counters to help identify the cause of some
  performance issues.
- Streamlined adapter internal init/stop code paths.
- Fiddled with debug code (adding some here, removing some there).
- Continued style(9) adjustments.
2011-06-08 21:18:14 +00:00

365 lines
12 KiB
C

/*-
* Copyright (c) 2007-2011 Broadcom Corporation. All rights reserved.
*
* Gary Zambrano <zambrano@broadcom.com>
* David Christensen <davidch@broadcom.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Broadcom Corporation nor the name of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written consent.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/*$FreeBSD$*/
#ifndef _BXE_DEBUG_H
#define _BXE_DEBUG_H
extern uint32_t bxe_debug;
/*
* Debugging macros and definitions.
*/
#define BXE_CP_LOAD 0x00000001
#define BXE_CP_SEND 0x00000002
#define BXE_CP_RECV 0x00000004
#define BXE_CP_INTR 0x00000008
#define BXE_CP_UNLOAD 0x00000010
#define BXE_CP_RESET 0x00000020
#define BXE_CP_IOCTL 0x00000040
#define BXE_CP_STATS 0x00000080
#define BXE_CP_MISC 0x00000100
#define BXE_CP_PHY 0x00000200
#define BXE_CP_RAMROD 0x00000400
#define BXE_CP_NVRAM 0x00000800
#define BXE_CP_REGS 0x00001000
#define BXE_CP_TPA 0x00002000
#define BXE_CP_ALL 0x00FFFFFF
#define BXE_CP_MASK 0x00FFFFFF
#define BXE_LEVEL_FATAL 0x00000000
#define BXE_LEVEL_WARN 0x01000000
#define BXE_LEVEL_INFO 0x02000000
#define BXE_LEVEL_VERBOSE 0x03000000
#define BXE_LEVEL_EXTREME 0x04000000
#define BXE_LEVEL_INSANE 0x05000000
#define BXE_LEVEL_MASK 0xFF000000
#define BXE_WARN_LOAD (BXE_CP_LOAD | BXE_LEVEL_WARN)
#define BXE_INFO_LOAD (BXE_CP_LOAD | BXE_LEVEL_INFO)
#define BXE_VERBOSE_LOAD (BXE_CP_LOAD | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_LOAD (BXE_CP_LOAD | BXE_LEVEL_EXTREME)
#define BXE_INSANE_LOAD (BXE_CP_LOAD | BXE_LEVEL_INSANE)
#define BXE_WARN_SEND (BXE_CP_SEND | BXE_LEVEL_WARN)
#define BXE_INFO_SEND (BXE_CP_SEND | BXE_LEVEL_INFO)
#define BXE_VERBOSE_SEND (BXE_CP_SEND | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_SEND (BXE_CP_SEND | BXE_LEVEL_EXTREME)
#define BXE_INSANE_SEND (BXE_CP_SEND | BXE_LEVEL_INSANE)
#define BXE_WARN_RECV (BXE_CP_RECV | BXE_LEVEL_WARN)
#define BXE_INFO_RECV (BXE_CP_RECV | BXE_LEVEL_INFO)
#define BXE_VERBOSE_RECV (BXE_CP_RECV | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_RECV (BXE_CP_RECV | BXE_LEVEL_EXTREME)
#define BXE_INSANE_RECV (BXE_CP_RECV | BXE_LEVEL_INSANE)
#define BXE_WARN_INTR (BXE_CP_INTR | BXE_LEVEL_WARN)
#define BXE_INFO_INTR (BXE_CP_INTR | BXE_LEVEL_INFO)
#define BXE_VERBOSE_INTR (BXE_CP_INTR | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_INTR (BXE_CP_INTR | BXE_LEVEL_EXTREME)
#define BXE_INSANE_INTR (BXE_CP_INTR | BXE_LEVEL_INSANE)
#define BXE_WARN_UNLOAD (BXE_CP_UNLOAD | BXE_LEVEL_WARN)
#define BXE_INFO_UNLOAD (BXE_CP_UNLOAD | BXE_LEVEL_INFO)
#define BXE_VERBOSE_UNLOAD (BXE_CP_UNLOAD | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_UNLOAD (BXE_CP_UNLOAD | BXE_LEVEL_EXTREME)
#define BXE_INSANE_UNLOAD (BXE_CP_UNLOAD | BXE_LEVEL_INSANE)
#define BXE_WARN_RESET (BXE_CP_RESET | BXE_LEVEL_WARN)
#define BXE_INFO_RESET (BXE_CP_RESET | BXE_LEVEL_INFO)
#define BXE_VERBOSE_RESET (BXE_CP_RESET | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_RESET (BXE_CP_RESET | BXE_LEVEL_EXTREME)
#define BXE_INSANE_RESET (BXE_CP_RESET | BXE_LEVEL_INSANE)
#define BXE_WARN_IOCTL (BXE_CP_IOCTL | BXE_LEVEL_WARN)
#define BXE_INFO_IOCTL (BXE_CP_IOCTL | BXE_LEVEL_INFO)
#define BXE_VERBOSE_IOCTL (BXE_CP_IOCTL | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_IOCTL (BXE_CP_IOCTL | BXE_LEVEL_EXTREME)
#define BXE_INSANE_IOCTL (BXE_CP_IOCTL | BXE_LEVEL_INSANE)
#define BXE_WARN_STATS (BXE_CP_STATS | BXE_LEVEL_WARN)
#define BXE_INFO_STATS (BXE_CP_STATS | BXE_LEVEL_INFO)
#define BXE_VERBOSE_STATS (BXE_CP_STATS | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_STATS (BXE_CP_STATS | BXE_LEVEL_EXTREME)
#define BXE_INSANE_STATS (BXE_CP_STATS | BXE_LEVEL_INSANE)
#define BXE_WARN_MISC (BXE_CP_MISC | BXE_LEVEL_WARN)
#define BXE_INFO_MISC (BXE_CP_MISC | BXE_LEVEL_INFO)
#define BXE_VERBOSE_MISC (BXE_CP_MISC | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_MISC (BXE_CP_MISC | BXE_LEVEL_EXTREME)
#define BXE_INSANE_MISC (BXE_CP_MISC | BXE_LEVEL_INSANE)
#define BXE_WARN_PHY (BXE_CP_PHY | BXE_LEVEL_WARN)
#define BXE_INFO_PHY (BXE_CP_PHY | BXE_LEVEL_INFO)
#define BXE_VERBOSE_PHY (BXE_CP_PHY | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_PHY (BXE_CP_PHY | BXE_LEVEL_EXTREME)
#define BXE_INSANE_PHY (BXE_CP_PHY | BXE_LEVEL_INSANE)
#define BXE_WARN_RAMROD (BXE_CP_RAMROD | BXE_LEVEL_WARN)
#define BXE_INFO_RAMROD (BXE_CP_RAMROD | BXE_LEVEL_INFO)
#define BXE_VERBOSE_RAMROD (BXE_CP_RAMROD | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_RAMROD (BXE_CP_RAMROD | BXE_LEVEL_EXTREME)
#define BXE_INSANE_RAMROD (BXE_CP_RAMROD | BXE_LEVEL_INSANE)
#define BXE_WARN_NVRAM (BXE_CP_NVRAM | BXE_LEVEL_WARN)
#define BXE_INFO_NVRAM (BXE_CP_NVRAM | BXE_LEVEL_INFO)
#define BXE_VERBOSE_NVRAM (BXE_CP_NVRAM | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_NVRAM (BXE_CP_NVRAM | BXE_LEVEL_EXTREME)
#define BXE_INSANE_NVRAM (BXE_CP_NVRAM | BXE_LEVEL_INSANE)
#define BXE_WARN_REGS (BXE_CP_REGS | BXE_LEVEL_WARN)
#define BXE_INFO_REGS (BXE_CP_REGS | BXE_LEVEL_INFO)
#define BXE_VERBOSE_REGS (BXE_CP_REGS | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_REGS (BXE_CP_REGS | BXE_LEVEL_EXTREME)
#define BXE_INSANE_REGS (BXE_CP_REGS | BXE_LEVEL_INSANE)
#define BXE_WARN_TPA (BXE_CP_TPA | BXE_LEVEL_WARN)
#define BXE_INFO_TPA (BXE_CP_TPA | BXE_LEVEL_INFO)
#define BXE_VERBOSE_TPA (BXE_CP_TPA | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME_TPA (BXE_CP_TPA | BXE_LEVEL_EXTREME)
#define BXE_INSANE_TPA (BXE_CP_TPA | BXE_LEVEL_INSANE)
#define BXE_FATAL (BXE_CP_ALL | BXE_LEVEL_FATAL)
#define BXE_WARN (BXE_CP_ALL | BXE_LEVEL_WARN)
#define BXE_INFO (BXE_CP_ALL | BXE_LEVEL_INFO)
#define BXE_VERBOSE (BXE_CP_ALL | BXE_LEVEL_VERBOSE)
#define BXE_EXTREME (BXE_CP_ALL | BXE_LEVEL_EXTREME)
#define BXE_INSANE (BXE_CP_ALL | BXE_LEVEL_INSANE)
#define BXE_CODE_PATH(cp) ((cp & BXE_CP_MASK) & bxe_debug)
#define BXE_MSG_LEVEL(lv) ((lv & BXE_LEVEL_MASK) <= (bxe_debug & BXE_LEVEL_MASK))
#define BXE_LOG_MSG(m) (BXE_CODE_PATH(m) && BXE_MSG_LEVEL(m))
#ifdef BXE_DEBUG
/* Print a message based on the logging level and code path. */
#define DBPRINT(sc, level, format, args...) \
do { \
if (BXE_LOG_MSG(level)) { \
device_printf(sc->dev, format, ## args); \
} \
} while (0)
/* Runs a particular command when debugging is enabled. */
#define DBRUN(args...) \
do { \
args; \
} while (0)
/* Runs a particular command based on the logging level. */
#define DBRUNLV(level, args...) \
if (BXE_MSG_LEVEL(level)) { \
args; \
}
/* Runs a particular command based on the code path. */
#define DBRUNCP(cp, args...) \
if (BXE_CODE_PATH(cp)) { \
args; \
}
/* Runs a particular command based on a condition. */
#define DBRUNIF(cond, args...) \
if (cond) { \
args; \
}
/* Runs a particular command based on the logging level and code path. */
#define DBRUNMSG(msg, args...) \
if (BXE_LOG_MSG(msg)) { \
args; \
}
/* Announces function entry. */
#define DBENTER(cond) \
DBPRINT(sc, (cond), "%s(enter:%d)\n", __FUNCTION__, curcpu)
/* Announces function exit. */
#define DBEXIT(cond) \
DBPRINT(sc, (cond), "%s(exit:%d)\n", __FUNCTION__, curcpu)
/* Needed for random() function which is only used in debugging. */
#include <sys/random.h>
/* Returns FALSE in "defects" per 2^31 - 1 calls, otherwise returns TRUE. */
#define DB_RANDOMFALSE(defects) (random() > defects)
#define DB_OR_RANDOMFALSE(defects) || (random() > defects)
#define DB_AND_RANDOMFALSE(defects) && (random() > defects)
/* Returns TRUE in "defects" per 2^31 - 1 calls, otherwise returns FALSE. */
#define DB_RANDOMTRUE(defects) (random() < defects)
#define DB_OR_RANDOMTRUE(defects) || (random() < defects)
#define DB_AND_RANDOMTRUE(defects) && (random() < defects)
#else
#define DBPRINT(...)
#define DBRUN(...)
#define DBRUNLV(...)
#define DBRUNCP(...)
#define DBRUNIF(...)
#define DBRUNMSG(...)
#define DBENTER(...)
#define DBENTER_UNLOCKED(...)
#define DBEXIT(...)
#define DBEXIT_UNLOCKED(...)
#define DB_RANDOMFALSE(...)
#define DB_OR_RANDOMFALSE(...)
#define DB_AND_RANDOMFALSE(...)
#define DB_RANDOMTRUE(...)
#define DB_OR_RANDOMTRUE(...)
#define DB_AND_RANDOMTRUE(...)
#endif /* BXE_DEBUG */
/* Generic bit decoding for printf("%b"). */
#define BXE_DWORD_PRINTFB \
"\020" \
"\40b31" \
"\37b30" \
"\36b29" \
"\35b28" \
"\34b27" \
"\33b26" \
"\32b25" \
"\31b24" \
"\30b23" \
"\27b22" \
"\26b21" \
"\25b20" \
"\24b19" \
"\23b18" \
"\22b17" \
"\21b16" \
"\20b15" \
"\17b14" \
"\16b13" \
"\15b12" \
"\14b11" \
"\13b10" \
"\12b9" \
"\11b8" \
"\10b7" \
"\07b6" \
"\06b5" \
"\05b4" \
"\04b3" \
"\03b2" \
"\02b1" \
"\01b0"
/* Supported link settings bit decoding for printf("%b"). */
#define BXE_SUPPORTED_PRINTFB \
"\020" \
"\040b31" \
"\037b30" \
"\036b29" \
"\035b28" \
"\034b27" \
"\033b26" \
"\032b25" \
"\031b24" \
"\030b23" \
"\027b22" \
"\026b21" \
"\025b20" \
"\024b19" \
"\023b18" \
"\022b17" \
"\02110000BaseT-Full" \
"\0202500BaseX-Full" \
"\017b14" \
"\016b13" \
"\015b12" \
"\014Pause" \
"\013Asym-Pause" \
"\012Autoneg" \
"\011Fiber" \
"\010TP" \
"\0071000BaseT-Full" \
"\0061000BaseT-Half" \
"\005100BaseTX-Full" \
"\004100BaseTX-Half" \
"\00310BaseT-Full" \
"\00210BaseT-Half" \
"\001b0"
/* Transmit BD TCP flags bit decoding for printf("%b"). */
#define BXE_ETH_TX_PARSE_BD_TCP_FLAGS_PRINTFB \
"\020" \
"\10CWR" \
"\07ECE" \
"\06URG" \
"\05ACK" \
"\04PSH" \
"\03RST" \
"\02SYN" \
"\01FIN"
/* Parsing BD global data bit decoding for printf("%b"). */
#define BXE_ETH_TX_PARSE_BD_GLOBAL_DATA_PRINTFB \
"\020" \
"\10NS" \
"\07LLC_SNAP" \
"\06PSEUDO_CS_WO_LEN" \
"\05CS_ANY"
/* Transmit BD flags bit decoding for printf("%b"). */
#define BXE_ETH_TX_BD_FLAGS_PRINTFB \
"\020" \
"\10IPv6" \
"\07LSO" \
"\06HDR_POOL" \
"\05START" \
"\04END" \
"\03TCP_CSUM" \
"\02IP_CSUM" \
"\01VLAN"
/* Receive CQE error flags bit decoding for printf("%b"). */
#define BXE_ETH_FAST_PATH_RX_CQE_ERROR_FLAGS_PRINTFB \
"\020" \
"\10RSRVD" \
"\07RSRVD" \
"\06END_FLAG" \
"\05START_FLAG" \
"\04L4_BAD_XSUM" \
"\03IP_BAD_XSUM" \
"\02PHY_DECODE_ERR" \
"\01SP"
#endif /* _BXE_DEBUG_H */