d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6e50170633
freebsd-dev/sys/dev/bxe/bxe_reg.h
Kevin Lo 1a7e07818d s/timout/timeout
2011-12-15 06:29:13 +00:00

6392 lines
273 KiB
C
Raw Blame History

/*-
* Copyright (c) 2007-2011 Broadcom Corporation. All rights reserved.
*
* Gary Zambrano <zambrano@broadcom.com>
* David Christensen <davidch@broadcom.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Broadcom Corporation nor the name of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written consent.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/*$FreeBSD$*/
/* bxe_reg.h: Broadcom Everest network driver.
* The registers description starts with the register Access type followed
* by size in bits. For example [RW 32]. The access types are:
* R - Read only
* RC - Clear on read
* RW - Read/Write
* ST - Statistics register (clear on read)
* W - Write only
* WB - Wide bus register - the size is over 32 bits and it should be
* read/write in consecutive 32 bits accesses
* WR - Write Clear (write 1 to clear the bit)
*/
#ifndef _BXE_REG_H
#define _BXE_REG_H
/* [R 19] Interrupt register #0 read */
#define BRB1_REG_BRB1_INT_STS 0x6011c
/* [RW 4] Parity mask register #0 read/write */
#define BRB1_REG_BRB1_PRTY_MASK 0x60138
/* [R 4] Parity register #0 read */
#define BRB1_REG_BRB1_PRTY_STS 0x6012c
/*
* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
* address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
* BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit.
*/
#define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200
/*
* [RW 10] The number of free blocks above which the High_llfc signal to
* interface #n is de-asserted.
*/
#define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0 0x6014c
/*
* [RW 10] The number of free blocks below which the High_llfc signal to
* interface #n is asserted.
*/
#define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0 0x6013c
/* [RW 23] LL RAM data. */
#define BRB1_REG_LL_RAM 0x61000
/*
* [RW 10] The number of free blocks above which the Low_llfc signal to
* interface #n is de-asserted.
*/
#define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0 0x6016c
/*
* [RW 10] The number of free blocks below which the Low_llfc signal to
* interface #n is asserted.
*/
#define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0 0x6015c
/* [R 24] The number of full blocks. */
#define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090
/*
* [ST 32] The number of cycles that the write_full signal towards MAC #0
* was asserted.
*/
#define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8
#define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc
#define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8
/*
* [ST 32] The number of cycles that the pause signal towards MAC #0 was
* asserted.
*/
#define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8
#define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc
/* [RW 10] Write client 0: De-assert pause threshold. */
#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078
#define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c
/* [RW 10] Write client 0: Assert pause threshold. */
#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
#define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c
/* [R 24] The number of full blocks occupied by port. */
#define BRB1_REG_PORT_NUM_OCC_BLOCKS_0 0x60094
/* [RW 1] Reset the design by software. */
#define BRB1_REG_SOFT_RESET 0x600dc
/* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
#define CCM_REG_CAM_OCCUP 0xd0188
/*
* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define CCM_REG_CCM_CFC_IFEN 0xd003c
/*
* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define CCM_REG_CCM_CQM_IFEN 0xd000c
/*
* [RW 1] If set the Q index; received from the QM is inserted to event ID.
* Otherwise 0 is inserted.
*/
#define CCM_REG_CCM_CQM_USE_Q 0xd00c0
/* [RW 11] Interrupt mask register #0 read/write */
#define CCM_REG_CCM_INT_MASK 0xd01e4
/* [R 11] Interrupt register #0 read */
#define CCM_REG_CCM_INT_STS 0xd01d8
/* [R 27] Parity register #0 read */
#define CCM_REG_CCM_PRTY_STS 0xd01e8
/*
* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
* REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
* Is used to determine the number of the AG context REG-pairs written back;
* when the input message Reg1WbFlg isn't set.
*/
#define CCM_REG_CCM_REG0_SZ 0xd00c4
/*
* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define CCM_REG_CCM_STORM0_IFEN 0xd0004
/*
* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define CCM_REG_CCM_STORM1_IFEN 0xd0008
/*
* [RW 1] CDU AG read Interface enable. If 0 - the request input is
* disregarded; valid output is deasserted; all other signals are treated as
* usual; if 1 - normal activity.
*/
#define CCM_REG_CDU_AG_RD_IFEN 0xd0030
/*
* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
* are disregarded; all other signals are treated as usual; if 1 - normal
* activity.
*/
#define CCM_REG_CDU_AG_WR_IFEN 0xd002c
/*
* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
* disregarded; valid output is deasserted; all other signals are treated as
* usual; if 1 - normal activity.
*/
#define CCM_REG_CDU_SM_RD_IFEN 0xd0038
/*
* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
* input is disregarded; all other signals are treated as usual; if 1 -
* normal activity.
*/
#define CCM_REG_CDU_SM_WR_IFEN 0xd0034
/*
* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
* the initial credit value; read returns the current value of the credit
* counter. Must be initialized to 1 at start-up.
*/
#define CCM_REG_CFC_INIT_CRD 0xd0204
/* [RW 2] Auxillary counter flag Q number 1. */
#define CCM_REG_CNT_AUX1_Q 0xd00c8
/* [RW 2] Auxillary counter flag Q number 2. */
#define CCM_REG_CNT_AUX2_Q 0xd00cc
/* [RW 28] The CM header value for QM request (primary). */
#define CCM_REG_CQM_CCM_HDR_P 0xd008c
/* [RW 28] The CM header value for QM request (secondary). */
#define CCM_REG_CQM_CCM_HDR_S 0xd0090
/*
* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define CCM_REG_CQM_CCM_IFEN 0xd0014
/*
* [RW 6] QM output initial credit. Max credit available - 32. Write writes
* the initial credit value; read returns the current value of the credit
* counter. Must be initialized to 32 at start-up.
*/
#define CCM_REG_CQM_INIT_CRD 0xd020c
/*
* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
* stands for weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define CCM_REG_CQM_P_WEIGHT 0xd00b8
/*
* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
* stands for weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define CCM_REG_CQM_S_WEIGHT 0xd00bc
/*
* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define CCM_REG_CSDM_IFEN 0xd0018
/*
* [RC 1] Set when the message length mismatch (relative to last indication)
* at the SDM interface is detected.
*/
#define CCM_REG_CSDM_LENGTH_MIS 0xd0170
/*
* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define CCM_REG_CSDM_WEIGHT 0xd00b4
/*
* [RW 28] The CM header for QM formatting in case of an error in the QM
* inputs.
*/
#define CCM_REG_ERR_CCM_HDR 0xd0094
/* [RW 8] The Event ID in case the input message ErrorFlg is set. */
#define CCM_REG_ERR_EVNT_ID 0xd0098
/*
* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 64 at start-up.
*/
#define CCM_REG_FIC0_INIT_CRD 0xd0210
/*
* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 64 at start-up.
*/
#define CCM_REG_FIC1_INIT_CRD 0xd0214
/*
* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
* - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr;
* ~ccm_registers_gr_ld0_pr.gr_ld0_pr and
* ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and
* outputs to STORM: aggregation; load FIC0; load FIC1 and store.
*/
#define CCM_REG_GR_ARB_TYPE 0xd015c
/*
* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
* highest priority is 3. It is supposed; that the Store channel priority is
* the compliment to 4 of the rest priorities - Aggregation channel; Load
* (FIC0) channel and Load (FIC1).
*/
#define CCM_REG_GR_LD0_PR 0xd0164
/*
* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
* highest priority is 3. It is supposed; that the Store channel priority is
* the compliment to 4 of the rest priorities - Aggregation channel; Load
* (FIC0) channel and Load (FIC1).
*/
#define CCM_REG_GR_LD1_PR 0xd0168
/* [RW 2] General flags index. */
#define CCM_REG_INV_DONE_Q 0xd0108
/*
* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM
* context and sent to STORM; for a specific connection type. The double
* REG-pairs are used in order to align to STORM context row size of 128
* bits. The offset of these data in the STORM context is always 0. Index
* _(0..15) stands for the connection type (one of 16).
*/
#define CCM_REG_N_SM_CTX_LD_0 0xd004c
#define CCM_REG_N_SM_CTX_LD_1 0xd0050
#define CCM_REG_N_SM_CTX_LD_2 0xd0054
#define CCM_REG_N_SM_CTX_LD_3 0xd0058
#define CCM_REG_N_SM_CTX_LD_4 0xd005c
/*
* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define CCM_REG_PBF_IFEN 0xd0028
/*
* [RC 1] Set when the message length mismatch (relative to last indication)
* at the pbf interface is detected.
*/
#define CCM_REG_PBF_LENGTH_MIS 0xd0180
/*
* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define CCM_REG_PBF_WEIGHT 0xd00ac
#define CCM_REG_PHYS_QNUM1_0 0xd0134
#define CCM_REG_PHYS_QNUM1_1 0xd0138
#define CCM_REG_PHYS_QNUM2_0 0xd013c
#define CCM_REG_PHYS_QNUM2_1 0xd0140
#define CCM_REG_PHYS_QNUM3_0 0xd0144
#define CCM_REG_PHYS_QNUM3_1 0xd0148
#define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114
#define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118
#define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c
#define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120
#define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124
#define CCM_REG_QOS_PHYS_QNUM2_1 0xd0128
#define CCM_REG_QOS_PHYS_QNUM3_0 0xd012c
#define CCM_REG_QOS_PHYS_QNUM3_1 0xd0130
/*
* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define CCM_REG_STORM_CCM_IFEN 0xd0010
/*
* [RC 1] Set when the message length mismatch (relative to last indication)
* at the STORM interface is detected.
*/
#define CCM_REG_STORM_LENGTH_MIS 0xd016c
/*
* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin)
* mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for
* weight 1(least prioritised); 2 stands for weight 2 (more prioritised);
* tc.
*/
#define CCM_REG_STORM_WEIGHT 0xd009c
/*
* [RW 1] Input tsem Interface enable. If 0 - the valid input is
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define CCM_REG_TSEM_IFEN 0xd001c
/*
* [RC 1] Set when the message length mismatch (relative to last indication)
* at the tsem interface is detected.
*/
#define CCM_REG_TSEM_LENGTH_MIS 0xd0174
/*
* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define CCM_REG_TSEM_WEIGHT 0xd00a0
/*
* [RW 1] Input usem Interface enable. If 0 - the valid input is
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define CCM_REG_USEM_IFEN 0xd0024
/*
* [RC 1] Set when message length mismatch (relative to last indication) at
* the usem interface is detected.
*/
#define CCM_REG_USEM_LENGTH_MIS 0xd017c
/*
* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
* weight 8 (the most prioritised); 1 stands for weight 1(least prioritised);
* 2 stands for weight 2; tc.
*/
#define CCM_REG_USEM_WEIGHT 0xd00a8
/*
* [RW 1] Input xsem Interface enable. If 0 - the valid input is
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define CCM_REG_XSEM_IFEN 0xd0020
/*
* [RC 1] Set when the message length mismatch (relative to last indication)
* at the xsem interface is detected.
*/
#define CCM_REG_XSEM_LENGTH_MIS 0xd0178
/*
* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define CCM_REG_XSEM_WEIGHT 0xd00a4
/*
* [RW 19] Indirect access to the descriptor table of the XX protection
* mechanism. The fields are: [5:0] - message length; [12:6] - message
* pointer; 18:13] - next pointer.
*/
#define CCM_REG_XX_DESCR_TABLE 0xd0300
#define CCM_REG_XX_DESCR_TABLE_SIZE 36
/* [R 7] Used to read the value of XX protection Free counter. */
#define CCM_REG_XX_FREE 0xd0184
/*
* [RW 6] Initial value for the credit counter; responsible for fulfilling
* of the Input Stage XX protection buffer by the XX protection pending
* messages. Max credit available - 127. Write writes the initial credit
* value; read returns the current value of the credit counter. Must be
* initialized to maximum XX protected message size - 2 at start-up.
*/
#define CCM_REG_XX_INIT_CRD 0xd0220
/*
* [RW 7] The maximum number of pending messages; which may be stored in XX
* protection. At read the ~ccm_registers_xx_free.xx_free counter is read.
* At write comprises the start value of the ~ccm_registers_xx_free.xx_free
* counter.
*/
#define CCM_REG_XX_MSG_NUM 0xd0224
/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
#define CCM_REG_XX_OVFL_EVNT_ID 0xd0044
/*
* [RW 18] Indirect access to the XX table of the XX protection mechanism.
* The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] -
* header pointer.
*/
#define CCM_REG_XX_TABLE 0xd0280
#define CDU_REG_CDU_CHK_MASK0 0x101000
#define CDU_REG_CDU_CHK_MASK1 0x101004
#define CDU_REG_CDU_CONTROL0 0x101008
#define CDU_REG_CDU_DEBUG 0x101010
#define CDU_REG_CDU_GLOBAL_PARAMS 0x101020
/* [RW 7] Interrupt mask register #0 read/write */
#define CDU_REG_CDU_INT_MASK 0x10103c
/* [R 7] Interrupt register #0 read */
#define CDU_REG_CDU_INT_STS 0x101030
/* [RW 5] Parity mask register #0 read/write */
#define CDU_REG_CDU_PRTY_MASK 0x10104c
/* [R 5] Parity register #0 read */
#define CDU_REG_CDU_PRTY_STS 0x101040
/*
* [RC 32] logging of error data in case of a CDU load error:
* {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
* ype_error; ctual_active; ctual_compressed_context};
*/
#define CDU_REG_ERROR_DATA 0x101014
/*
* [WB 216] L1TT ram access. each entry has the following format :
* {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0];
* ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]}
*/
#define CDU_REG_L1TT 0x101800
/*
* [WB 24] MATT ram access. each entry has the following
* format:{RegionLength[11:0]; egionOffset[11:0]}
*/
#define CDU_REG_MATT 0x101100
/* [RW 1] when this bit is set the CDU operates in e1hmf mode */
#define CDU_REG_MF_MODE 0x101050
/*
* [R 1] indication the initializing the activity counter by the hardware
* was done.
*/
#define CFC_REG_AC_INIT_DONE 0x104078
/* [RW 13] activity counter ram access */
#define CFC_REG_ACTIVITY_COUNTER 0x104400
#define CFC_REG_ACTIVITY_COUNTER_SIZE 256
/* [R 1] indication the initializing the cams by the hardware was done. */
#define CFC_REG_CAM_INIT_DONE 0x10407c
/* [RW 2] Interrupt mask register #0 read/write */
#define CFC_REG_CFC_INT_MASK 0x104108
/* [R 2] Interrupt register #0 read */
#define CFC_REG_CFC_INT_STS 0x1040fc
/* [RC 2] Interrupt register #0 read clear */
#define CFC_REG_CFC_INT_STS_CLR 0x104100
/* [RW 4] Parity mask register #0 read/write */
#define CFC_REG_CFC_PRTY_MASK 0x104118
/* [R 4] Parity register #0 read */
#define CFC_REG_CFC_PRTY_STS 0x10410c
/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
#define CFC_REG_CID_CAM 0x104800
#define CFC_REG_CONTROL0 0x104028
#define CFC_REG_DEBUG0 0x104050
/*
* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error
* vector) whether the cfc should be disabled upon it.
*/
#define CFC_REG_DISABLE_ON_ERROR 0x104044
/*
* [RC 14] CFC error vector. when the CFC detects an internal error it will
* set one of these bits. the bit description can be found in CFC
* specifications.
*/
#define CFC_REG_ERROR_VECTOR 0x10403c
/* [WB 93] LCID info ram access */
#define CFC_REG_INFO_RAM 0x105000
#define CFC_REG_INFO_RAM_SIZE 1024
#define CFC_REG_INIT_REG 0x10404c
#define CFC_REG_INTERFACES 0x104058
/*
* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
* field allows changing the priorities of the weighted-round-robin arbiter
* which selects which CFC load client should be served next.
*/
#define CFC_REG_LCREQ_WEIGHTS 0x104084
/* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */
#define CFC_REG_LINK_LIST 0x104c00
#define CFC_REG_LINK_LIST_SIZE 256
/* [R 1] indication the initializing the link list by the hardware was done. */
#define CFC_REG_LL_INIT_DONE 0x104074
/* [R 9] Number of allocated LCIDs which are at empty state */
#define CFC_REG_NUM_LCIDS_ALLOC 0x104020
/* [R 9] Number of Arriving LCIDs in Link List Block */
#define CFC_REG_NUM_LCIDS_ARRIVING 0x104004
/* [R 9] Number of Leaving LCIDs in Link List Block */
#define CFC_REG_NUM_LCIDS_LEAVING 0x104018
/* [RW 8] The event id for aggregated interrupt 0 */
#define CSDM_REG_AGG_INT_EVENT_0 0xc2038
#define CSDM_REG_AGG_INT_EVENT_10 0xc2060
#define CSDM_REG_AGG_INT_EVENT_11 0xc2064
#define CSDM_REG_AGG_INT_EVENT_12 0xc2068
#define CSDM_REG_AGG_INT_EVENT_13 0xc206c
#define CSDM_REG_AGG_INT_EVENT_14 0xc2070
#define CSDM_REG_AGG_INT_EVENT_15 0xc2074
#define CSDM_REG_AGG_INT_EVENT_16 0xc2078
#define CSDM_REG_AGG_INT_EVENT_2 0xc2040
#define CSDM_REG_AGG_INT_EVENT_3 0xc2044
#define CSDM_REG_AGG_INT_EVENT_4 0xc2048
#define CSDM_REG_AGG_INT_EVENT_5 0xc204c
#define CSDM_REG_AGG_INT_EVENT_6 0xc2050
#define CSDM_REG_AGG_INT_EVENT_7 0xc2054
#define CSDM_REG_AGG_INT_EVENT_8 0xc2058
#define CSDM_REG_AGG_INT_EVENT_9 0xc205c
/*
* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
* or auto-mask-mode (1).
*/
#define CSDM_REG_AGG_INT_MODE_10 0xc21e0
#define CSDM_REG_AGG_INT_MODE_11 0xc21e4
#define CSDM_REG_AGG_INT_MODE_12 0xc21e8
#define CSDM_REG_AGG_INT_MODE_13 0xc21ec
#define CSDM_REG_AGG_INT_MODE_14 0xc21f0
#define CSDM_REG_AGG_INT_MODE_15 0xc21f4
#define CSDM_REG_AGG_INT_MODE_16 0xc21f8
#define CSDM_REG_AGG_INT_MODE_6 0xc21d0
#define CSDM_REG_AGG_INT_MODE_7 0xc21d4
#define CSDM_REG_AGG_INT_MODE_8 0xc21d8
#define CSDM_REG_AGG_INT_MODE_9 0xc21dc
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
/* [RW 16] The maximum value of the competion counter #0 */
#define CSDM_REG_CMP_COUNTER_MAX0 0xc201c
/* [RW 16] The maximum value of the competion counter #1 */
#define CSDM_REG_CMP_COUNTER_MAX1 0xc2020
/* [RW 16] The maximum value of the competion counter #2 */
#define CSDM_REG_CMP_COUNTER_MAX2 0xc2024
/* [RW 16] The maximum value of the competion counter #3 */
#define CSDM_REG_CMP_COUNTER_MAX3 0xc2028
/*
* [RW 13] The start address in the internal RAM for the completion
* counters.
*/
#define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c
/* [RW 32] Interrupt mask register #0 read/write */
#define CSDM_REG_CSDM_INT_MASK_0 0xc229c
#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
/* [R 32] Interrupt register #0 read */
#define CSDM_REG_CSDM_INT_STS_0 0xc2290
#define CSDM_REG_CSDM_INT_STS_1 0xc22a0
/* [RW 11] Parity mask register #0 read/write */
#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
/* [R 11] Parity register #0 read */
#define CSDM_REG_CSDM_PRTY_STS 0xc22b0
#define CSDM_REG_ENABLE_IN1 0xc2238
#define CSDM_REG_ENABLE_IN2 0xc223c
#define CSDM_REG_ENABLE_OUT1 0xc2240
#define CSDM_REG_ENABLE_OUT2 0xc2244
/*
* [RW 4] The initial number of messages that can be sent to the pxp control
* interface without receiving any ACK.
*/
#define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc
/* [ST 32] The number of ACK after placement messages received */
#define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c
/* [ST 32] The number of packet end messages received from the parser */
#define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274
/* [ST 32] The number of requests received from the pxp async if */
#define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278
/* [ST 32] The number of commands received in queue 0 */
#define CSDM_REG_NUM_OF_Q0_CMD 0xc2248
/* [ST 32] The number of commands received in queue 10 */
#define CSDM_REG_NUM_OF_Q10_CMD 0xc226c
/* [ST 32] The number of commands received in queue 11 */
#define CSDM_REG_NUM_OF_Q11_CMD 0xc2270
/* [ST 32] The number of commands received in queue 1 */
#define CSDM_REG_NUM_OF_Q1_CMD 0xc224c
/* [ST 32] The number of commands received in queue 3 */
#define CSDM_REG_NUM_OF_Q3_CMD 0xc2250
/* [ST 32] The number of commands received in queue 4 */
#define CSDM_REG_NUM_OF_Q4_CMD 0xc2254
/* [ST 32] The number of commands received in queue 5 */
#define CSDM_REG_NUM_OF_Q5_CMD 0xc2258
/* [ST 32] The number of commands received in queue 6 */
#define CSDM_REG_NUM_OF_Q6_CMD 0xc225c
/* [ST 32] The number of commands received in queue 7 */
#define CSDM_REG_NUM_OF_Q7_CMD 0xc2260
/* [ST 32] The number of commands received in queue 8 */
#define CSDM_REG_NUM_OF_Q8_CMD 0xc2264
/* [ST 32] The number of commands received in queue 9 */
#define CSDM_REG_NUM_OF_Q9_CMD 0xc2268
/* [RW 13] The start address in the internal RAM for queue counters */
#define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
#define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548
/* [R 1] parser fifo empty in sdm_sync block */
#define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550
/* [R 1] parser serial fifo empty in sdm_sync block */
#define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558
/*
* [RW 32] Tick for timer counter. Applicable only when
* ~csdm_registers_timer_tick_enable.timer_tick_enable =1
*/
#define CSDM_REG_TIMER_TICK 0xc2000
/* [RW 5] The number of time_slots in the arbitration cycle */
#define CSEM_REG_ARB_CYCLE_SIZE 0x200034
/*
* [RW 3] The source that is associated with arbitration element 0. Source
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2
*/
#define CSEM_REG_ARB_ELEMENT0 0x200020
/*
* [RW 3] The source that is associated with arbitration element 1. Source
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~csem_registers_arb_element0.arb_element0.
*/
#define CSEM_REG_ARB_ELEMENT1 0x200024
/*
* [RW 3] The source that is associated with arbitration element 2. Source
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~csem_registers_arb_element0.arb_element0
* and ~csem_registers_arb_element1.arb_element1.
*/
#define CSEM_REG_ARB_ELEMENT2 0x200028
/*
* [RW 3] The source that is associated with arbitration element 3. Source
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
* not be equal to register ~csem_registers_arb_element0.arb_element0 and
* ~csem_registers_arb_element1.arb_element1 and
* ~csem_registers_arb_element2.arb_element2.
*/
#define CSEM_REG_ARB_ELEMENT3 0x20002c
/*
* [RW 3] The source that is associated with arbitration element 4. Source
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~csem_registers_arb_element0.arb_element0
* and ~csem_registers_arb_element1.arb_element1 and
* ~csem_registers_arb_element2.arb_element2 and
* ~csem_registers_arb_element3.arb_element3.
*/
#define CSEM_REG_ARB_ELEMENT4 0x200030
/* [RW 32] Interrupt mask register #0 read/write */
#define CSEM_REG_CSEM_INT_MASK_0 0x200110
#define CSEM_REG_CSEM_INT_MASK_1 0x200120
/* [R 32] Interrupt register #0 read */
#define CSEM_REG_CSEM_INT_STS_0 0x200104
#define CSEM_REG_CSEM_INT_STS_1 0x200114
/* [RW 32] Parity mask register #0 read/write */
#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
/* [R 32] Parity register #0 read */
#define CSEM_REG_CSEM_PRTY_STS_0 0x200124
#define CSEM_REG_CSEM_PRTY_STS_1 0x200134
#define CSEM_REG_ENABLE_IN 0x2000a4
#define CSEM_REG_ENABLE_OUT 0x2000a8
/*
* [RW 32] This address space contains all registers and memories that are
* placed in SEM_FAST block. The SEM_FAST registers are described in
* appendix B. In order to access the sem_fast registers the base address
* ~fast_memory.fast_memory should be added to eachsem_fast register offset.
*/
#define CSEM_REG_FAST_MEMORY 0x220000
/*
* [RW 1] Disables input messages from FIC0 May be updated during run_time
* by the microcode.
*/
#define CSEM_REG_FIC0_DISABLE 0x200224
/*
* [RW 1] Disables input messages from FIC1 May be updated during run_time
* by the microcode.
*/
#define CSEM_REG_FIC1_DISABLE 0x200234
/*
* [RW 15] Interrupt table Read and write access to it is not possible in
* the middle of the work
*/
#define CSEM_REG_INT_TABLE 0x200400
/*
* [ST 24] Statistics register. The number of messages that entered through
FIC0
*/
#define CSEM_REG_MSG_NUM_FIC0 0x200000
/*
* [ST 24] Statistics register. The number of messages that entered through
* FIC1
*/
#define CSEM_REG_MSG_NUM_FIC1 0x200004
/*
* [ST 24] Statistics register. The number of messages that were sent to
* FOC0
*/
#define CSEM_REG_MSG_NUM_FOC0 0x200008
/*
* [ST 24] Statistics register. The number of messages that were sent to
* FOC1
*/
#define CSEM_REG_MSG_NUM_FOC1 0x20000c
/*
* [ST 24] Statistics register. The number of messages that were sent to
* FOC2
*/
#define CSEM_REG_MSG_NUM_FOC2 0x200010
/*
* [ST 24] Statistics register. The number of messages that were sent to
* FOC3
*/
#define CSEM_REG_MSG_NUM_FOC3 0x200014
/*
* [RW 1] Disables input messages from the passive buffer May be updated
* during run_time by the microcode.
*/
#define CSEM_REG_PAS_DISABLE 0x20024c
/* [WB 128] Debug only. Passive buffer memory */
#define CSEM_REG_PASSIVE_BUFFER 0x202000
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
#define CSEM_REG_PRAM 0x240000
/* [R 16] Valid sleeping threads indication have bit per thread */
#define CSEM_REG_SLEEP_THREADS_VALID 0x20026c
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
#define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0
/* [RW 16] List of free threads . There is a bit per thread. */
#define CSEM_REG_THREADS_LIST 0x2002e4
/* [RW 3] The arbitration scheme of time_slot 0 */
#define CSEM_REG_TS_0_AS 0x200038
/* [RW 3] The arbitration scheme of time_slot 10 */
#define CSEM_REG_TS_10_AS 0x200060
/* [RW 3] The arbitration scheme of time_slot 11 */
#define CSEM_REG_TS_11_AS 0x200064
/* [RW 3] The arbitration scheme of time_slot 12 */
#define CSEM_REG_TS_12_AS 0x200068
/* [RW 3] The arbitration scheme of time_slot 13 */
#define CSEM_REG_TS_13_AS 0x20006c
/* [RW 3] The arbitration scheme of time_slot 14 */
#define CSEM_REG_TS_14_AS 0x200070
/* [RW 3] The arbitration scheme of time_slot 15 */
#define CSEM_REG_TS_15_AS 0x200074
/* [RW 3] The arbitration scheme of time_slot 16 */
#define CSEM_REG_TS_16_AS 0x200078
/* [RW 3] The arbitration scheme of time_slot 17 */
#define CSEM_REG_TS_17_AS 0x20007c
/* [RW 3] The arbitration scheme of time_slot 18 */
#define CSEM_REG_TS_18_AS 0x200080
/* [RW 3] The arbitration scheme of time_slot 1 */
#define CSEM_REG_TS_1_AS 0x20003c
/* [RW 3] The arbitration scheme of time_slot 2 */
#define CSEM_REG_TS_2_AS 0x200040
/* [RW 3] The arbitration scheme of time_slot 3 */
#define CSEM_REG_TS_3_AS 0x200044
/* [RW 3] The arbitration scheme of time_slot 4 */
#define CSEM_REG_TS_4_AS 0x200048
/* [RW 3] The arbitration scheme of time_slot 5 */
#define CSEM_REG_TS_5_AS 0x20004c
/* [RW 3] The arbitration scheme of time_slot 6 */
#define CSEM_REG_TS_6_AS 0x200050
/* [RW 3] The arbitration scheme of time_slot 7 */
#define CSEM_REG_TS_7_AS 0x200054
/* [RW 3] The arbitration scheme of time_slot 8 */
#define CSEM_REG_TS_8_AS 0x200058
/* [RW 3] The arbitration scheme of time_slot 9 */
#define CSEM_REG_TS_9_AS 0x20005c
/* [RW 1] Parity mask register #0 read/write */
#define DBG_REG_DBG_PRTY_MASK 0xc0a8
/* [R 1] Parity register #0 read */
#define DBG_REG_DBG_PRTY_STS 0xc09c
/*
* [RW 32] Commands memory. The address to command X; row Y is to calculated
* as 14*X+Y.
*/
#define DMAE_REG_CMD_MEM 0x102400
#define DMAE_REG_CMD_MEM_SIZE 224
/*
* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
* initial value is all ones.
*/
#define DMAE_REG_CRC16C_INIT 0x10201c
/*
* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the
* CRC-16 T10 initial value is all ones.
*/
#define DMAE_REG_CRC16T10_INIT 0x102020
/* [RW 2] Interrupt mask register #0 read/write */
#define DMAE_REG_DMAE_INT_MASK 0x102054
/* [RW 4] Parity mask register #0 read/write */
#define DMAE_REG_DMAE_PRTY_MASK 0x102064
/* [R 4] Parity register #0 read */
#define DMAE_REG_DMAE_PRTY_STS 0x102058
/* [RW 1] Command 0 go. */
#define DMAE_REG_GO_C0 0x102080
/* [RW 1] Command 1 go. */
#define DMAE_REG_GO_C1 0x102084
/* [RW 1] Command 10 go. */
#define DMAE_REG_GO_C10 0x102088
/* [RW 1] Command 11 go. */
#define DMAE_REG_GO_C11 0x10208c
/* [RW 1] Command 12 go. */
#define DMAE_REG_GO_C12 0x102090
/* [RW 1] Command 13 go. */
#define DMAE_REG_GO_C13 0x102094
/* [RW 1] Command 14 go. */
#define DMAE_REG_GO_C14 0x102098
/* [RW 1] Command 15 go. */
#define DMAE_REG_GO_C15 0x10209c
/* [RW 1] Command 2 go. */
#define DMAE_REG_GO_C2 0x1020a0
/* [RW 1] Command 3 go. */
#define DMAE_REG_GO_C3 0x1020a4
/* [RW 1] Command 4 go. */
#define DMAE_REG_GO_C4 0x1020a8
/* [RW 1] Command 5 go. */
#define DMAE_REG_GO_C5 0x1020ac
/* [RW 1] Command 6 go. */
#define DMAE_REG_GO_C6 0x1020b0
/* [RW 1] Command 7 go. */
#define DMAE_REG_GO_C7 0x1020b4
/* [RW 1] Command 8 go. */
#define DMAE_REG_GO_C8 0x1020b8
/* [RW 1] Command 9 go. */
#define DMAE_REG_GO_C9 0x1020bc
/*
* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
* input is disregarded; valid is deasserted; all other signals are treated
* as usual; if 1 - normal activity.
*/
#define DMAE_REG_GRC_IFEN 0x102008
/*
* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the
* acknowledge input is disregarded; valid is deasserted; full is asserted;
* all other signals are treated as usual; if 1 - normal activity.
*/
#define DMAE_REG_PCI_IFEN 0x102004
/*
* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
* initial value to the credit counter; related to the address. Read returns
* the current value of the counter.
*/
#define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0
/* [RW 8] Aggregation command. */
#define DORQ_REG_AGG_CMD0 0x170060
/* [RW 8] Aggregation command. */
#define DORQ_REG_AGG_CMD1 0x170064
/* [RW 8] Aggregation command. */
#define DORQ_REG_AGG_CMD2 0x170068
/* [RW 8] Aggregation command. */
#define DORQ_REG_AGG_CMD3 0x17006c
/* [RW 28] UCM Header. */
#define DORQ_REG_CMHEAD_RX 0x170050
/* [RW 32] Doorbell address for RBC doorbells (function 0). */
#define DORQ_REG_DB_ADDR0 0x17008c
/* [RW 5] Interrupt mask register #0 read/write */
#define DORQ_REG_DORQ_INT_MASK 0x170180
/* [R 5] Interrupt register #0 read */
#define DORQ_REG_DORQ_INT_STS 0x170174
/* [RC 5] Interrupt register #0 read clear */
#define DORQ_REG_DORQ_INT_STS_CLR 0x170178
/* [RW 2] Parity mask register #0 read/write */
#define DORQ_REG_DORQ_PRTY_MASK 0x170190
/* [R 2] Parity register #0 read */
#define DORQ_REG_DORQ_PRTY_STS 0x170184
/* [RW 8] The address to write the DPM CID to STORM. */
#define DORQ_REG_DPM_CID_ADDR 0x170044
/* [RW 5] The DPM mode CID extraction offset. */
#define DORQ_REG_DPM_CID_OFST 0x170030
/* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */
#define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c
/* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */
#define DORQ_REG_DQ_FIFO_FULL_TH 0x170078
/*
* [R 13] Current value of the DQ FIFO fill level according to following
* pointer. The range is 0 - 256 FIFO rows; where each row stands for the
* doorbell.
*/
#define DORQ_REG_DQ_FILL_LVLF 0x1700a4
/*
* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more o
* equal to full threshold; reset on full clear.
*/
#define DORQ_REG_DQ_FULL_ST 0x1700c0
/* [RW 28] The value sent to CM header in the case of CFC load error. */
#define DORQ_REG_ERR_CMHEAD 0x170058
#define DORQ_REG_IF_EN 0x170004
#define DORQ_REG_MODE_ACT 0x170008
/* [RW 5] The normal mode CID extraction offset. */
#define DORQ_REG_NORM_CID_OFST 0x17002c
/* [RW 28] TCM Header when only TCP context is loaded. */
#define DORQ_REG_NORM_CMHEAD_TX 0x17004c
/*
* [RW 3] The number of simultaneous outstanding requests to Context Fetc
* Interface.
*/
#define DORQ_REG_OUTST_REQ 0x17003c
#define DORQ_REG_REGN 0x170038
/*
* [R 4] Current value of response A counter credit. Initial credit i
* configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
* register.
*/
#define DORQ_REG_RSPA_CRD_CNT 0x1700ac
/*
* [R 4] Current value of response B counter credit. Initial credit i
* configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
* register.
*/
#define DORQ_REG_RSPB_CRD_CNT 0x1700b0
/*
* [RW 4] The initial credit at the Doorbell Response Interface. The writ
* writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
* read reads this written value.
*/
#define DORQ_REG_RSP_INIT_CRD 0x170048
/*
* [RW 4] Initial activity counter value on the load request; when th
* shortcut is done.
*/
#define DORQ_REG_SHRT_ACT_CNT 0x170070
/* [RW 28] TCM Header when both ULP and TCP context is loaded. */
#define DORQ_REG_SHRT_CMHEAD 0x170054
#define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4)
#define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3)
#define HC_CONFIG_0_REG_MSI_ATTN_EN_0 (0x1<<7)
#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2)
#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1)
#define HC_REG_AGG_INT_0 0x108050
#define HC_REG_AGG_INT_1 0x108054
#define HC_REG_ATTN_BIT 0x108120
#define HC_REG_ATTN_IDX 0x108100
#define HC_REG_ATTN_MSG0_ADDR_L 0x108018
#define HC_REG_ATTN_MSG1_ADDR_L 0x108020
#define HC_REG_ATTN_NUM_P0 0x108038
#define HC_REG_ATTN_NUM_P1 0x10803c
#define HC_REG_COMMAND_REG 0x108180
#define HC_REG_CONFIG_0 0x108000
#define HC_REG_CONFIG_1 0x108004
#define HC_REG_FUNC_NUM_P0 0x1080ac
#define HC_REG_FUNC_NUM_P1 0x1080b0
/* [RW 3] Parity mask register #0 read/write */
#define HC_REG_HC_PRTY_MASK 0x1080a0
/* [R 3] Parity register #0 read */
#define HC_REG_HC_PRTY_STS 0x108094
#define HC_REG_INT_MASK 0x108108
#define HC_REG_LEADING_EDGE_0 0x108040
#define HC_REG_LEADING_EDGE_1 0x108048
#define HC_REG_P0_PROD_CONS 0x108200
#define HC_REG_P1_PROD_CONS 0x108400
#define HC_REG_PBA_COMMAND 0x108140
#define HC_REG_PCI_CONFIG_0 0x108010
#define HC_REG_PCI_CONFIG_1 0x108014
#define HC_REG_STATISTIC_COUNTERS 0x109000
#define HC_REG_TRAILING_EDGE_0 0x108044
#define HC_REG_TRAILING_EDGE_1 0x10804c
#define HC_REG_UC_RAM_ADDR_0 0x108028
#define HC_REG_UC_RAM_ADDR_1 0x108030
#define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068
#define HC_REG_VQID_0 0x108008
#define HC_REG_VQID_1 0x10800c
#define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424
#define MCP_REG_MCPR_NVM_ADDR 0x8640c
#define MCP_REG_MCPR_NVM_CFG4 0x8642c
#define MCP_REG_MCPR_NVM_COMMAND 0x86400
#define MCP_REG_MCPR_NVM_READ 0x86410
#define MCP_REG_MCPR_NVM_SW_ARB 0x86420
#define MCP_REG_MCPR_NVM_WRITE 0x86408
#define MCP_REG_MCPR_SCRATCH 0xa0000
/*
* [R 32] read first 32 bit after inversion of function 0. mapped a
* follows: [0] NIG attention for function0; [1] NIG attention for
* function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
* [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
* GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
* glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
* [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
* MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
* Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
* interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
* error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
* interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF
* Parity error; [31] PBF Hw interrupt;
*/
#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c
#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430
/*
* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0
* NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
* mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
* [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
* PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
* function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
* Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
* mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
* BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
* Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
* interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
* Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
* interrupt;
*/
#define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434
/*
* [R 32] read second 32 bit after inversion of function 0. mapped a
* follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
* Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
* interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
* error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
* interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
* NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
* [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
* interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
* Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
* Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
* Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
* interrupt;
*/
#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438
#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c
/*
* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0
* PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error;
* [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
* [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
* XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
* DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
* error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
* PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
* [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
* [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
* [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
* [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt;
*/
#define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440
/*
* [R 32] read third 32 bit after inversion of function 0. mapped a
* follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
* error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
* PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
* interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
* error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
* Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
* pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
* MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
* SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
* timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
* func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
* attn1;
*/
#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444
#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448
/*
* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0
* CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
* Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
* Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
* error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
* interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
* MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
* Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
* timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
* func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
* func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
* timers attn_4 func1; [30] General attn0; [31] General attn1;
*/
#define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c
/*
* [R 32] read fourth 32 bit after inversion of function 0. mapped a
* follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
* General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
* [7] General attn9; [8] General attn10; [9] General attn11; [10] General
* attn12; [11] General attn13; [12] General attn14; [13] General attn15;
* [14] General attn16; [15] General attn17; [16] General attn18; [17]
* General attn19; [18] General attn20; [19] General attn21; [20] Main power
* interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
* Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
* Latched timeout attention; [27] GRC Latched reserved access attention;
* [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
* Latched ump_tx_parity; [31] MCP Latched scpad_parity;
*/
#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450
#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454
/*
* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0
* General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
* [4] General attn6; [5] General attn7; [6] General attn8; [7] General
* attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
* General attn13; [12] General attn14; [13] General attn15; [14] General
* attn16; [15] General attn17; [16] General attn18; [17] General attn19;
* [18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
* RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
* RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
* attention; [27] GRC Latched reserved access attention; [28] MCP Latched
* rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
* ump_tx_parity; [31] MCP Latched scpad_parity;
*/
#define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458
/*
* [W 14] write to this register results with the clear of the latche
* signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
* d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
* latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
* GRC Latched reserved access attention; one in d7 clears Latched
* rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
* Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
* ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
* pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
* from this register return zero
*/
#define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c
/*
* [RW 32] first 32b for enabling the output for function 0 output0. mappe
* as follows: [0] NIG attention for function0; [1] NIG attention for
* function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
* 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
* GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
* function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
* Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
* SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
* indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
* [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
* SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
* TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
* TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt;
*/
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2 0xa08c
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5 0xa0bc
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6 0xa0cc
#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7 0xa0dc
/*
* [RW 32] first 32b for enabling the output for function 1 output0. mappe
* as follows: [0] NIG attention for function0; [1] NIG attention for
* function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
* 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
* GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
* function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
* Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
* SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
* indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
* [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
* SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
* TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
* TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt;
*/
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2 0xa12c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5 0xa15c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6 0xa16c
#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7 0xa17c
/*
* [RW 32] first 32b for enabling the output for close the gate nig. mappe
* as follows: [0] NIG attention for function0; [1] NIG attention for
* function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
* 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
* GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
* function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
* Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
* SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
* indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
* [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
* SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
* TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
* TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt;
*/
#define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec
#define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c
/*
* [RW 32] first 32b for enabling the output for close the gate pxp. mappe
* as follows: [0] NIG attention for function0; [1] NIG attention for
* function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
* 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
* GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
* function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
* Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
* SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
* indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
* [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
* SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
* TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
* TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt;
*/
#define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc
#define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c
/*
* [RW 32] second 32b for enabling the output for function 0 output0. mappe
* as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
* Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
* interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
* error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
* interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
* NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
* [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
* interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
* Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
* Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
* Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
* interrupt;
*/
#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070
#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080
/*
* [RW 32] second 32b for enabling the output for function 1 output0. mappe
* as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
* Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
* interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
* error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
* interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
* NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
* [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
* interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
* Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
* Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
* Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
* interrupt;
*/
#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110
#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120
/*
* [RW 32] second 32b for enabling the output for close the gate nig. mappe
* as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
* Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
* interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
* error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
* interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
* NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
* [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
* interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
* Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
* Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
* Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
* interrupt;
*/
#define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0
#define MISC_REG_AEU_ENABLE2_NIG_1 0xa190
/*
* [RW 32] second 32b for enabling the output for close the gate pxp. mappe
* as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
* Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
* interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
* error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
* interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
* NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
* [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
* interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
* Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
* Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
* Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
* interrupt;
*/
#define MISC_REG_AEU_ENABLE2_PXP_0 0xa100
#define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0
/*
* [RW 32] third 32b for enabling the output for function 0 output0. mappe
* as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
* Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
* [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
* interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
* error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
* Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
* pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
* MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
* SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
* timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
* func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
* attn1;
*/
#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074
#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084
/*
* [RW 32] third 32b for enabling the output for function 1 output0. mappe
* as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
* Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
* [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
* interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
* error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
* Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
* pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
* MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
* SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
* timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
* func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
* attn1;
*/
#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114
#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124
/*
* [RW 32] third 32b for enabling the output for close the gate nig. mappe
* as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
* Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
* [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
* interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
* error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
* Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
* pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
* MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
* SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
* timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
* func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
* attn1;
*/
#define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4
#define MISC_REG_AEU_ENABLE3_NIG_1 0xa194
/*
* [RW 32] third 32b for enabling the output for close the gate pxp. mappe
* as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
* Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
* [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
* interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
* error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
* Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
* pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
* MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
* SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
* timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
* func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
* attn1;
*/
#define MISC_REG_AEU_ENABLE3_PXP_0 0xa104
#define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4
/*
* [RW 32] fourth 32b for enabling the output for function 0 output0.mappe
* as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
* General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
* [7] General attn9; [8] General attn10; [9] General attn11; [10] General
* attn12; [11] General attn13; [12] General attn14; [13] General attn15;
* [14] General attn16; [15] General attn17; [16] General attn18; [17]
* General attn19; [18] General attn20; [19] General attn21; [20] Main power
* interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
* Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
* Latched timeout attention; [27] GRC Latched reserved access attention;
* [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
* Latched ump_tx_parity; [31] MCP Latched scpad_parity;
*/
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4 0xa0b8
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5 0xa0c8
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6 0xa0d8
#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7 0xa0e8
/*
* [RW 32] fourth 32b for enabling the output for function 1 output0.mappe
* as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
* General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
* [7] General attn9; [8] General attn10; [9] General attn11; [10] General
* attn12; [11] General attn13; [12] General attn14; [13] General attn15;
* [14] General attn16; [15] General attn17; [16] General attn18; [17]
* General attn19; [18] General attn20; [19] General attn21; [20] Main power
* interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
* Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
* Latched timeout attention; [27] GRC Latched reserved access attention;
* [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
* Latched ump_tx_parity; [31] MCP Latched scpad_parity;
*/
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4 0xa158
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5 0xa168
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6 0xa178
#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7 0xa188
/*
* [RW 32] fourth 32b for enabling the output for close the gate nig.mappe
* as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
* General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
* [7] General attn9; [8] General attn10; [9] General attn11; [10] General
* attn12; [11] General attn13; [12] General attn14; [13] General attn15;
* [14] General attn16; [15] General attn17; [16] General attn18; [17]
* General attn19; [18] General attn20; [19] General attn21; [20] Main power
* interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
* Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
* Latched timeout attention; [27] GRC Latched reserved access attention;
* [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
* Latched ump_tx_parity; [31] MCP Latched scpad_parity;
*/
#define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8
#define MISC_REG_AEU_ENABLE4_NIG_1 0xa198
/*
* [RW 32] fourth 32b for enabling the output for close the gate pxp.mappe
* as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
* General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
* [7] General attn9; [8] General attn10; [9] General attn11; [10] General
* attn12; [11] General attn13; [12] General attn14; [13] General attn15;
* [14] General attn16; [15] General attn17; [16] General attn18; [17]
* General attn19; [18] General attn20; [19] General attn21; [20] Main power
* interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
* Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
* Latched timeout attention; [27] GRC Latched reserved access attention;
* [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
* Latched ump_tx_parity; [31] MCP Latched scpad_parity;
*/
#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
/*
* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the ae
* 128 bit vector
*/
#define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
#define MISC_REG_AEU_GENERAL_ATTN_1 0xa004
#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
#define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
#define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c
#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020
#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024
#define MISC_REG_AEU_GENERAL_MASK 0xa61c
/*
* [RW 32] first 32b for inverting the input for function 0; for each bit
* 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
* function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
* [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1;
* [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
* function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
* Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
* SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication
* for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS
* Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw
* interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM
* Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI
* Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt;
*/
#define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c
#define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c
/*
* [RW 32] second 32b for inverting the input for function 0; for each bit
* 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity
* error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw
* interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
* Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
* interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
* DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
* error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
* PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
* [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
* [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
* [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
* [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt;
*/
#define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230
#define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240
/*
* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0
* [9:8] = raserved. Zero = mask; one = unmask
*/
#define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060
#define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064
/* [RW 1] If set a system kill occurred */
#define MISC_REG_AEU_SYS_KILL_OCCURRED 0xa610
/*
* [RW 32] Represent the status of the input vector to the AEU when a syste
* kill occurred. The register is reset in por reset. Mapped as follows: [0]
* NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
* mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
* [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
* PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
* function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
* Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
* mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
* BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
* Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
* interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
* Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
* interrupt;
*/
#define MISC_REG_AEU_SYS_KILL_STATUS_0 0xa600
#define MISC_REG_AEU_SYS_KILL_STATUS_1 0xa604
#define MISC_REG_AEU_SYS_KILL_STATUS_2 0xa608
#define MISC_REG_AEU_SYS_KILL_STATUS_3 0xa60c
/*
* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' -
* Port.
*/
#define MISC_REG_BOND_ID 0xa400
/*
* [R 8] These bits indicate the metal revision of the chip. This valu
* starts at 0x00 for each all-layer tape-out and increments by one for each
* tape-out.
*/
#define MISC_REG_CHIP_METAL 0xa404
/* [R 16] These bits indicate the part number for the chip. */
#define MISC_REG_CHIP_NUM 0xa408
/*
* [R 4] These bits indicate the base revision of the chip. This valu
* starts at 0x0 for the A0 tape-out and increments by one for each
* all-layer tape-out.
*/
#define MISC_REG_CHIP_REV 0xa40c
/*
* [RW 32] The following driver registers(1...16) represent 16 drivers an
* 32 clients. Each client can be controlled by one driver only. One in each
* bit represent that this driver control the appropriate client (Ex: bit 5
* is set means this driver control client number 5). addr1 = set; addr0 =
* clear; read from both addresses will give the same result = status. write
* to address 1 will set a request to control all the clients that their
* appropriate bit (in the write command) is set. if the client is free (the
* appropriate bit in all the other drivers is clear) one will be written to
* that driver register; if the client isn't free the bit will remain zero.
* if the appropriate bit is set (the driver request to gain control on a
* client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
* interrupt will be asserted). write to address 0 will set a request to
* free all the clients that their appropriate bit (in the write command) is
* set. if the appropriate bit is clear (the driver request to free a client
* it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
* be asserted).
*/
#define MISC_REG_DRIVER_CONTROL_1 0xa510
#define MISC_REG_DRIVER_CONTROL_7 0xa3c8
/*
* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit
* only.
*/
#define MISC_REG_E1HMF_MODE 0xa5f8
/* [RW 32] Debug only: spare RW register reset by core reset */
#define MISC_REG_GENERIC_CR_0 0xa460
/*
* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any o
* these bits is written as a '1'; the corresponding SPIO bit will turn off
* it's drivers and become an input. This is the reset state of all GPIO
* pins. The read value of these bits will be a '1' if that last command
* (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
* [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
* as a '1'; the corresponding GPIO bit will drive low. The read value of
* these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
* this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
* SET When any of these bits is written as a '1'; the corresponding GPIO
* bit will drive high (if it has that capability). The read value of these
* bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
* bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
* RO; These bits indicate the read value of each of the eight GPIO pins.
* This is the result value of the pin; not the drive value. Writing these
* bits will have not effect.
*/
#define MISC_REG_GPIO 0xa490
/*
* [RW 8] These bits enable the GPIO_INTs to signals event to th
* IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2]
* p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2;
* [7] p1_gpio_3;
*/
#define MISC_REG_GPIO_EVENT_EN 0xa2bc
/*
* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing
* '1' to these bit clears the corresponding bit in the #OLD_VALUE register.
* This will acknowledge an interrupt on the falling edge of corresponding
* GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0;
* Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE
* register. This will acknowledge an interrupt on the rising edge of
* corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1;
* OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input
* value. When the ~INT_STATE bit is set; this bit indicates the OLD value
* of the pin such that if ~INT_STATE is set and this bit is '0'; then the
* interrupt is due to a low to high edge. If ~INT_STATE is set and this bit
* is '1'; then the interrupt is due to a high to low edge (reset value 0).
* [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the
* current GPIO interrupt state for each GPIO pin. This bit is cleared when
* the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is
* set when the GPIO input does not match the current value in #OLD_VALUE
* (reset value 0).
*/
#define MISC_REG_GPIO_INT 0xa494
/*
* [R 28] this field hold the last information that caused reserve
* attention. bits [19:0] - address; [22:20] function; [23] reserved;
* [27:24] the master that caused the attention - according to the following
* encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
* dbu; 8 = dmae
*/
#define MISC_REG_GRC_RSV_ATTN 0xa3c0
/*
* [R 28] this field hold the last information that caused timeou
* attention. bits [19:0] - address; [22:20] function; [23] reserved;
* [27:24] the master that caused the attention - according to the following
* encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
* dbu; 8 = dmae
*/
#define MISC_REG_GRC_TIMEOUT_ATTN 0xa3c4
/*
* [RW 1] Setting this bit enables a timer in the GRC block to timeout an
* access that does not finish within
* ~misc_registers_grc_timeout_val.grc_timeout_val cycles. When this bit is
* cleared; this timeout is disabled. If this timeout occurs; the GRC shall
* assert it attention output.
*/
#define MISC_REG_GRC_TIMEOUT_EN 0xa280
/*
* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order o
* the bits is: [2:0] OAC reset value 001) CML output buffer bias control;
* 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl
* (reset value 001) Charge pump current control; 111 for 720u; 011 for
* 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00)
* Global bias control; When bit 7 is high bias current will be 10 0gh; When
* bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8]
* Pll_observe (reset value 010) Bits to control observability. bit 10 is
* for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl
* (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V
* and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning
* sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted
* internally). [14] reserved (reset value 0) Reset for VCO sequencer is
* connected to RESET input directly. [15] capRetry_en (reset value 0)
* enable retry on cap search failure (inverted). [16] freqMonitor_e (reset
* value 0) bit to continuously monitor vco freq (inverted). [17]
* freqDetRestart_en (reset value 0) bit to enable restart when not freq
* locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable
* retry on freq det failure(inverted). [19] pllForceFdone_en (reset value
* 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20]
* pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass
* (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value
* 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0)
* bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to
* enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force
* capPass. [26] capRestart (reset value 0) bit to force cap sequencer to
* restart. [27] capSelectM_en (reset value 0) bit to enable cap select
* register bits.
*/
#define MISC_REG_LCPLL_CTRL_1 0xa2a4
#define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8
/* [RW 4] Interrupt mask register #0 read/write */
#define MISC_REG_MISC_INT_MASK 0xa388
/* [RW 1] Parity mask register #0 read/write */
#define MISC_REG_MISC_PRTY_MASK 0xa398
/* [R 1] Parity register #0 read */
#define MISC_REG_MISC_PRTY_STS 0xa38c
#define MISC_REG_NIG_WOL_P0 0xa270
#define MISC_REG_NIG_WOL_P1 0xa274
/*
* [R 1] If set indicate that the pcie_rst_b was asserted without pers
* assertion
*/
#define MISC_REG_PCIE_HOT_RESET 0xa618
/*
* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911
* inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
* divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
* divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2
* divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2
* divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9]
* freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1]
* (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value
* 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16]
* Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset
* value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value
* 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0);
* [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25]
* Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27]
* testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29]
* testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31]
* testa_en (reset value 0);
*/
#define MISC_REG_PLL_STORM_CTRL_1 0xa294
#define MISC_REG_PLL_STORM_CTRL_2 0xa298
#define MISC_REG_PLL_STORM_CTRL_3 0xa29c
#define MISC_REG_PLL_STORM_CTRL_4 0xa2a0
/*
* [RW 32] reset reg#2; rite/read one = the specific block is out of reset
* write/read zero = the specific block is in reset; addr 0-wr- the write
* value will be written to the register; addr 1-set - one will be written
* to all the bits that have the value of one in the data written (bits that
* have the value of zero will not be change) ; addr 2-clear - zero will be
* written to all the bits that have the value of one in the data written
* (bits that have the value of zero will not be change); addr 3-ignore;
* read ignore from all addr except addr 00; inside order of the bits is:
* [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc;
* [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7]
* rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn;
* [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13]
* Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16]
* rst_pxp_rq_rd_wr; 31:17] reserved
*/
#define MISC_REG_RESET_REG_2 0xa590
/*
* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that i
* shared with the driver resides
*/
#define MISC_REG_SHARED_MEM_ADDR 0xa2b4
/*
* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1'
* the corresponding SPIO bit will turn off it's drivers and become an
* input. This is the reset state of all SPIO pins. The read value of these
* bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
* bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
* is written as a '1'; the corresponding SPIO bit will drive low. The read
* value of these bits will be a '1' if that last command (#SET; #CLR; or
* #FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
* these bits is written as a '1'; the corresponding SPIO bit will drive
* high (if it has that capability). The read value of these bits will be a
* '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
* (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
* each of the eight SPIO pins. This is the result value of the pin; not the
* drive value. Writing these bits will have not effect. Each 8 bits field
* is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
* from VAUX. (This is an output pin only; the FLOAT field is not applicable
* for this pin); [1] VAUX Disable; when pulsed low; disables supply form
* VAUX. (This is an output pin only; FLOAT field is not applicable for this
* pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
* select VAUX supply. (This is an output pin only; it is not controlled by
* the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
* field is not applicable for this pin; only the VALUE fields is relevant -
* it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
* Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
* device ID select; read by UMP firmware.
*/
#define MISC_REG_SPIO 0xa4fc
/*
* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC
* according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
* [7:0] reserved
*/
#define MISC_REG_SPIO_EVENT_EN 0xa2b8
/*
* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears th
* corresponding bit in the #OLD_VALUE register. This will acknowledge an
* interrupt on the falling edge of corresponding SPIO input (reset value
* 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
* in the #OLD_VALUE register. This will acknowledge an interrupt on the
* rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
* RO; These bits indicate the old value of the SPIO input value. When the
* ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
* that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
* to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
* interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
* RO; These bits indicate the current SPIO interrupt state for each SPIO
* pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
* command bit is written. This bit is set when the SPIO input does not
* match the current value in #OLD_VALUE (reset value 0).
*/
#define MISC_REG_SPIO_INT 0xa500
/*
* [RW 32] reload value for counter 4 if reload; the value will be reload i
* the counter reached zero and the reload bit
* (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set.
*/
#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
/*
* [RW 32] the value of the counter for sw timers1-8. there are 8 addresse
* in this register. addres 0 - timer 1; address - timer 2<>address 7 -
* timer 8.
*/
#define MISC_REG_SW_TIMER_VAL 0xa5c0
/*
* [RW 1] Set by the MCP to remember if one or more of the drivers is/ar
* loaded; 0-prepare; -unprepare
*/
#define MISC_REG_UNPREPARED 0xa424
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST (0x1<<0)
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST (0x1<<1)
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN (0x1<<4)
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST (0x1<<2)
#define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN (0x1<<3)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18)
/* [RW 1] Input enable for RX_BMAC0 IF */
#define NIG_REG_BMAC0_IN_EN 0x100ac
/* [RW 1] output enable for TX_BMAC0 IF */
#define NIG_REG_BMAC0_OUT_EN 0x100e0
/* [RW 1] output enable for TX BMAC pause port 0 IF */
#define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110
/* [RW 1] output enable for RX_BMAC0_REGS IF */
#define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8
/* [RW 1] output enable for RX BRB1 port0 IF */
#define NIG_REG_BRB0_OUT_EN 0x100f8
/* [RW 1] Input enable for TX BRB1 pause port 0 IF */
#define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4
/* [RW 1] output enable for RX BRB1 port1 IF */
#define NIG_REG_BRB1_OUT_EN 0x100fc
/* [RW 1] Input enable for TX BRB1 pause port 1 IF */
#define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8
/* [RW 1] output enable for RX BRB1 LP IF */
#define NIG_REG_BRB_LB_OUT_EN 0x10100
/*
* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64
* error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
* 72:73]-vnic_num; 81:74]-sideband_info
*/
#define NIG_REG_DEBUG_PACKET_LB 0x10800
/* [RW 1] Input enable for TX Debug packet */
#define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc
/*
* [RW 1] If 1 - egress drain mode for port0 is active. In this mode al
* packets from PBFare not forwarded to the MAC and just deleted from FIFO.
* First packet may be deleted from the middle. And last packet will be
* always deleted till the end.
*/
#define NIG_REG_EGRESS_DRAIN0_MODE 0x10060
/* [RW 1] Output enable to EMAC0 */
#define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120
/*
* [RW 1] MAC configuration for packets of port0. If 1 - all packet output
* to emac for port0; other way to bmac for port0
*/
#define NIG_REG_EGRESS_EMAC0_PORT 0x10058
/* [RW 1] Input enable for TX PBF user packet port0 IF */
#define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
/* [RW 1] Input enable for TX PBF user packet port1 IF */
#define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0
/* [RW 1] Input enable for TX UMP management packet port0 IF */
#define NIG_REG_EGRESS_UMP0_IN_EN 0x100d4
/* [RW 1] Input enable for RX_EMAC0 IF */
#define NIG_REG_EMAC0_IN_EN 0x100a4
/* [RW 1] output enable for TX EMAC pause port 0 IF */
#define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118
/*
* [R 1] status from emac0. This bit is set when MDINT from either th
* EXT_MDINT pin or from the Copper PHY is driven low. This condition must
* be cleared in the attached PHY device that is driving the MINT pin.
*/
#define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494
/*
* [WB 48] This address space contains BMAC0 registers. The BMAC register
* are described in appendix A. In order to access the BMAC0 registers; the
* base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
* added to each BMAC register offset
*/
#define NIG_REG_INGRESS_BMAC0_MEM 0x10c00
/*
* [WB 48] This address space contains BMAC1 registers. The BMAC register
* are described in appendix A. In order to access the BMAC0 registers; the
* base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
* added to each BMAC register offset
*/
#define NIG_REG_INGRESS_BMAC1_MEM 0x11000
/* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
#define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0
/*
* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Dat
* packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16]
*/
#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
/*
* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latc
* logic for interrupts must be used. Enable per bit of interrupt of
* ~latch_status.latch_status
*/
#define NIG_REG_LATCH_BC_0 0x16210
/*
* [RW 27] Latch for each interrupt from Unicore.b[0
* status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete;
* b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status;
* b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn;
* b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete;
* b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status;
* b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete;
* b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet;
* b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g;
* b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact;
* b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx;
* b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx;
* b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs
*/
#define NIG_REG_LATCH_STATUS_0 0x18000
/* [RW 1] led 10g for port 0 */
#define NIG_REG_LED_10G_P0 0x10320
/* [RW 1] led 10g for port 1 */
#define NIG_REG_LED_10G_P1 0x10324
/*
* [RW 1] Port0: This bit is set to enable the use of th
* ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
* defined below. If this bit is cleared; then the blink rate will be about
* 8Hz.
*/
#define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318
/*
* [RW 12] Port0: Specifies the period of each blink cycle (on + off) fo
* Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
* is reset to 0x080; giving a default blink period of approximately 8Hz.
*/
#define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310
/*
* [RW 1] Port0: If set along with th
* ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
* bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
* bit; the Traffic LED will blink with the blink rate specified in
* ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
* ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
* fields.
*/
#define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308
/*
* [RW 1] Port0: If set overrides hardware control of the Traffic LED. Th
* Traffic LED will then be controlled via bit ~nig_registers_
* led_control_traffic_p0.led_control_traffic_p0 and bit
* ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0
*/
#define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8
/*
* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit
* turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
* set; the LED will blink with blink rate specified in
* ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
* ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
* fields.
*/
#define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300
/*
* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3
* 9-11PHY7; 12 MAC4; 13-15 PHY10;
*/
#define NIG_REG_LED_MODE_P0 0x102f0
/*
* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1
* tsdm enable; b2- usdm enable
*/
#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0 0x16070
#define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 0x16074
/*
* [RW 1] SAFC enable for port0. This register may get 1 only whe
* ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
* port
*/
#define NIG_REG_LLFC_ENABLE_0 0x16208
/* [RW 16] classes are high-priority for port0 */
#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0 0x16058
/* [RW 16] classes are low-priority for port0 */
#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0 0x16060
/* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
#define NIG_REG_LLFC_OUT_EN_0 0x160c8
#define NIG_REG_LLH0_ACPI_PAT_0_CRC 0x1015c
#define NIG_REG_LLH0_ACPI_PAT_6_LEN 0x10154
#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
#define NIG_REG_LLH0_BRB1_DRV_MASK_MF 0x16048
/* [RW 1] send to BRB1 if no match on any of RMP rules. */
#define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c
/*
* [RW 2] Determine the classification participants. 0: no classification.1
* classification upon VLAN id. 2: classification upon MAC address. 3:
* classification upon both VLAN id & MAC addr.
*/
#define NIG_REG_LLH0_CLS_TYPE 0x16080
/* [RW 32] cm header for llh0 */
#define NIG_REG_LLH0_CM_HEADER 0x1007c
#define NIG_REG_LLH0_DEST_IP_0_1 0x101dc
#define NIG_REG_LLH0_DEST_MAC_0_0 0x101c0
/*
* [RW 16] destination TCP address 1. The LLH will look for this address i
* all incoming packets.
*/
#define NIG_REG_LLH0_DEST_TCP_0 0x10220
/*
* [RW 16] destination UDP address 1 The LLH will look for this address i
* all incoming packets.
*/
#define NIG_REG_LLH0_DEST_UDP_0 0x10214
#define NIG_REG_LLH0_ERROR_MASK 0x1008c
/* [RW 8] event id for llh0 */
#define NIG_REG_LLH0_EVENT_ID 0x10084
#define NIG_REG_LLH0_FUNC_EN 0x160fc
#define NIG_REG_LLH0_FUNC_VLAN_ID 0x16100
/*
* [RW 1] Determine the IP version to look for i
* ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4
*/
#define NIG_REG_LLH0_IPV4_IPV6_0 0x10208
/* [RW 1] t bit for llh0 */
#define NIG_REG_LLH0_T_BIT 0x10074
/* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
#define NIG_REG_LLH0_VLAN_ID_0 0x1022c
/* [RW 8] init credit counter for port0 in LLH */
#define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554
#define NIG_REG_LLH0_XCM_MASK 0x10130
#define NIG_REG_LLH1_BRB1_DRV_MASK 0x10248
/* [RW 1] send to BRB1 if no match on any of RMP rules. */
#define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc
/*
* [RW 2] Determine the classification participants. 0: no classification.1
* classification upon VLAN id. 2: classification upon MAC address. 3:
* classification upon both VLAN id & MAC addr.
*/
#define NIG_REG_LLH1_CLS_TYPE 0x16084
/* [RW 32] cm header for llh1 */
#define NIG_REG_LLH1_CM_HEADER 0x10080
#define NIG_REG_LLH1_ERROR_MASK 0x10090
/* [RW 8] event id for llh1 */
#define NIG_REG_LLH1_EVENT_ID 0x10088
/* [RW 8] init credit counter for port1 in LLH */
#define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564
#define NIG_REG_LLH1_XCM_MASK 0x10134
/*
* [RW 1] When this bit is set; the LLH will expect all packets to be wit
* e1hov
*/
#define NIG_REG_LLH_E1HOV_MODE 0x160d8
/*
* [RW 1] When this bit is set; the LLH will classify the packet befor
* sending it to the BRB or calculating WoL on it.
*/
#define NIG_REG_LLH_MF_MODE 0x16024
#define NIG_REG_MASK_INTERRUPT_PORT0 0x10330
#define NIG_REG_MASK_INTERRUPT_PORT1 0x10334
/* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
#define NIG_REG_NIG_EMAC0_EN 0x1003c
/* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */
#define NIG_REG_NIG_EMAC1_EN 0x10040
/*
* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to th
* EMAC0 to strip the CRC from the ingress packets.
*/
#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
/* [R 32] Interrupt register #0 read */
#define NIG_REG_NIG_INT_STS_0 0x103b0
#define NIG_REG_NIG_INT_STS_1 0x103c0
/* [R 32] Parity register #0 read */
#define NIG_REG_NIG_PRTY_STS 0x103d0
/*
* [RW 1] Pause enable for port0. This register may get 1 only whe
* ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
* port
*/
#define NIG_REG_PAUSE_ENABLE_0 0x160c0
/* [RW 1] Input enable for RX PBF LP IF */
#define NIG_REG_PBF_LB_IN_EN 0x100b4
/*
* [RW 1] Value of this register will be transmitted to port swap whe
* ~nig_registers_strap_override.strap_override =1
*/
#define NIG_REG_PORT_SWAP 0x10394
/* [RW 1] output enable for RX parser descriptor IF */
#define NIG_REG_PRS_EOP_OUT_EN 0x10104
/* [RW 1] Input enable for RX parser request IF */
#define NIG_REG_PRS_REQ_IN_EN 0x100b8
/* [RW 5] control to serdes - CL45 DEVAD */
#define NIG_REG_SERDES0_CTRL_MD_DEVAD 0x10370
/* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */
#define NIG_REG_SERDES0_CTRL_MD_ST 0x1036c
/* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
#define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374
/* [R 1] status from serdes0 that inputs to interrupt logic of link status */
#define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578
/*
* [R 32] Rx statistics : In user packets discarded due to BRB backpressur
* for port0
*/
#define NIG_REG_STAT0_BRB_DISCARD 0x105f0
/*
* [R 32] Rx statistics : In user packets truncated due to BRB backpressur
* for port0
*/
#define NIG_REG_STAT0_BRB_TRUNCATE 0x105f8
/*
* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 tha
* between 1024 and 1522 bytes for port0
*/
#define NIG_REG_STAT0_EGRESS_MAC_PKT0 0x10750
/*
* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 tha
* between 1523 bytes and above for port0
*/
#define NIG_REG_STAT0_EGRESS_MAC_PKT1 0x10760
/*
* [R 32] Rx statistics : In user packets discarded due to BRB backpressur
* for port1
*/
#define NIG_REG_STAT1_BRB_DISCARD 0x10628
/*
* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 tha
* between 1024 and 1522 bytes for port1
*/
#define NIG_REG_STAT1_EGRESS_MAC_PKT0 0x107a0
/*
* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 tha
* between 1523 bytes and above for port1
*/
#define NIG_REG_STAT1_EGRESS_MAC_PKT1 0x107b0
/* [WB_R 64] Rx statistics : User octets received for LP */
#define NIG_REG_STAT2_BRB_OCTET 0x107e0
#define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
#define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c
/*
* [RW 1] port swap mux selection. If this register equal to 0 then por
* swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
* ort swap is equal to ~nig_registers_port_swap.port_swap
*/
#define NIG_REG_STRAP_OVERRIDE 0x10398
/* [RW 1] output enable for RX_XCM0 IF */
#define NIG_REG_XCM0_OUT_EN 0x100f0
/* [RW 1] output enable for RX_XCM1 IF */
#define NIG_REG_XCM1_OUT_EN 0x100f4
/* [RW 1] control to xgxs - remote PHY in-band MDIO */
#define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST 0x10348
/* [RW 5] control to xgxs - CL45 DEVAD */
#define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c
/* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
#define NIG_REG_XGXS0_CTRL_MD_ST 0x10338
/* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
#define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340
/* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
#define NIG_REG_XGXS0_STATUS_LINK10G 0x10680
/* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
#define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684
/* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */
#define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
/* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
#define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT (0x1<<0)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
/*
* [RW 1] Disable processing further tasks from port 0 (after ending th
* current task in process).
*/
#define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c
/*
* [RW 1] Disable processing further tasks from port 1 (after ending th
* current task in process).
*/
#define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060
/*
* [RW 1] Disable processing further tasks from port 4 (after ending th
* current task in process).
*/
#define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c
#define PBF_REG_IF_ENABLE_REG 0x140044
/*
* [RW 1] Init bit. When set the initial credits are copied to the credi
* registers (except the port credits). Should be set and then reset after
* the configuration of the block has ended.
*/
#define PBF_REG_INIT 0x140000
/*
* [RW 1] Init bit for port 0. When set the initial credit of port 0 i
* copied to the credit register. Should be set and then reset after the
* configuration of the port has ended.
*/
#define PBF_REG_INIT_P0 0x140004
/*
* [RW 1] Init bit for port 1. When set the initial credit of port 1 i
* copied to the credit register. Should be set and then reset after the
* configuration of the port has ended.
*/
#define PBF_REG_INIT_P1 0x140008
/*
* [RW 1] Init bit for port 4. When set the initial credit of port 4 i
* copied to the credit register. Should be set and then reset after the
* configuration of the port has ended.
*/
#define PBF_REG_INIT_P4 0x14000c
/* [RW 1] Enable for mac interface 0. */
#define PBF_REG_MAC_IF0_ENABLE 0x140030
/* [RW 1] Enable for mac interface 1. */
#define PBF_REG_MAC_IF1_ENABLE 0x140034
/* [RW 1] Enable for the loopback interface. */
#define PBF_REG_MAC_LB_ENABLE 0x140040
/*
* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when paus
* not suppoterd.
*/
#define PBF_REG_P0_ARB_THRSH 0x1400e4
/* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */
#define PBF_REG_P0_CREDIT 0x140200
/*
* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byt
* lines.
*/
#define PBF_REG_P0_INIT_CRD 0x1400d0
/* [RW 1] Indication that pause is enabled for port 0. */
#define PBF_REG_P0_PAUSE_ENABLE 0x140014
/* [R 8] Number of tasks in port 0 task queue. */
#define PBF_REG_P0_TASK_CNT 0x140204
/* [R 11] Current credit for port 1 in the tx port buffers in 16 byte lines. */
#define PBF_REG_P1_CREDIT 0x140208
/*
* [RW 11] Initial credit for port 1 in the tx port buffers in 16 byt
* lines.
*/
#define PBF_REG_P1_INIT_CRD 0x1400d4
/* [R 8] Number of tasks in port 1 task queue. */
#define PBF_REG_P1_TASK_CNT 0x14020c
/* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */
#define PBF_REG_P4_CREDIT 0x140210
/*
* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byt
* lines.
*/
#define PBF_REG_P4_INIT_CRD 0x1400e0
/* [R 8] Number of tasks in port 4 task queue. */
#define PBF_REG_P4_TASK_CNT 0x140214
/* [RW 5] Interrupt mask register #0 read/write */
#define PBF_REG_PBF_INT_MASK 0x1401d4
/* [R 5] Interrupt register #0 read */
#define PBF_REG_PBF_INT_STS 0x1401c8
#define PB_REG_CONTROL 0
/* [RW 2] Interrupt mask register #0 read/write */
#define PB_REG_PB_INT_MASK 0x28
/* [R 2] Interrupt register #0 read */
#define PB_REG_PB_INT_STS 0x1c
/* [RW 4] Parity mask register #0 read/write */
#define PB_REG_PB_PRTY_MASK 0x38
/* [R 4] Parity register #0 read */
#define PB_REG_PB_PRTY_STS 0x2c
#define PRS_REG_A_PRSU_20 0x40134
/* [R 8] debug only: CFC load request current credit. Transaction based. */
#define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
/* [R 8] debug only: CFC search request current credit. Transaction based. */
#define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168
/*
* [RW 6] The initial credit for the search message to the CFC interface
* Credit is transaction based.
*/
#define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c
/* [RW 24] CID for port 0 if no match */
#define PRS_REG_CID_PORT_0 0x400fc
/*
* [RW 32] The CM header for flush message where 'load existed' bit in CF
* load response is reset and packet type is 0. Used in packet start message
* to TCM.
*/
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec
#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5 0x400f0
/*
* [RW 32] The CM header for flush message where 'load existed' bit in CF
* load response is set and packet type is 0. Used in packet start message
* to TCM.
*/
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc
#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5 0x400d0
/*
* [RW 32] The CM header for a match and packet type 1 for loopback port
* Used in packet start message to TCM.
*/
#define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c
#define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0
#define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4
#define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8
/*
* [RW 32] The CM header for a match and packet type 0. Used in packet star
* message to TCM.
*/
#define PRS_REG_CM_HDR_TYPE_0 0x40078
#define PRS_REG_CM_HDR_TYPE_1 0x4007c
#define PRS_REG_CM_HDR_TYPE_2 0x40080
#define PRS_REG_CM_HDR_TYPE_3 0x40084
#define PRS_REG_CM_HDR_TYPE_4 0x40088
/* [RW 32] The CM header in case there was not a match on the connection */
#define PRS_REG_CM_NO_MATCH_HDR 0x400b8
/* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */
#define PRS_REG_E1HOV_MODE 0x401c8
/*
* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packe
* start message to TCM.
*/
#define PRS_REG_EVENT_ID_1 0x40054
#define PRS_REG_EVENT_ID_2 0x40058
#define PRS_REG_EVENT_ID_3 0x4005c
/* [RW 16] The Ethernet type value for FCoE */
#define PRS_REG_FCOE_TYPE 0x401d0
/*
* [RW 8] Context region for flush packet with packet type 0. Used in CF
* load request message.
*/
#define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004
#define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008
#define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c
#define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010
#define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014
#define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018
#define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c
#define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020
/* [RW 4] The increment value to send in the CFC load request message */
#define PRS_REG_INC_VALUE 0x40048
/* [RW 1] If set indicates not to send messages to CFC on received packets */
#define PRS_REG_NIC_MODE 0x40138
/*
* [RW 8] The 8-bit event ID for cases where there is no match on th
* connection. Used in packet start message to TCM.
*/
#define PRS_REG_NO_MATCH_EVENT_ID 0x40070
/* [ST 24] The number of input CFC flush packets */
#define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128
/*
* [ST 32] The number of cycles the Parser halted its operation since i
* could not allocate the next serial number
*/
#define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130
/* [ST 24] The number of input packets */
#define PRS_REG_NUM_OF_PACKETS 0x40124
/* [ST 24] The number of input transparent flush packets */
#define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c
/*
* [RW 8] Context region for received Ethernet packet with a match an
* packet type 0. Used in CFC load request message
*/
#define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028
#define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c
#define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030
#define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034
#define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038
#define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c
#define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040
#define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044
/* [R 2] debug only: Number of pending requests for CAC on port 0. */
#define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174
/* [R 2] debug only: Number of pending requests for header parsing. */
#define PRS_REG_PENDING_BRB_PRS_RQ 0x40170
/* [R 1] Interrupt register #0 read */
#define PRS_REG_PRS_INT_STS 0x40188
/* [RW 8] Parity mask register #0 read/write */
#define PRS_REG_PRS_PRTY_MASK 0x401a4
/* [R 8] Parity register #0 read */
#define PRS_REG_PRS_PRTY_STS 0x40198
/*
* [RW 8] Context region for pure acknowledge packets. Used in CFC loa
* request message
*/
#define PRS_REG_PURE_REGIONS 0x40024
/*
* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates thi
* serail number was released by SDM but cannot be used because a previous
* serial number was not released.
*/
#define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154
/*
* [R 32] debug only: Serial number status msb 32 bits. '1' indicates thi
* serail number was released by SDM but cannot be used because a previous
* serial number was not released.
*/
#define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158
/* [R 4] debug only: SRC current credit. Transaction based. */
#define PRS_REG_SRC_CURRENT_CREDIT 0x4016c
/* [R 8] debug only: TCM current credit. Cycle based. */
#define PRS_REG_TCM_CURRENT_CREDIT 0x40160
/* [R 8] debug only: TSDM current credit. Transaction based. */
#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
/* [R 6] Debug only: Number of used entries in the data FIFO */
#define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c
/* [R 7] Debug only: Number of used entries in the header FIFO */
#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
#define PXP2_REG_PGL_ADDR_88_F0 0x120534
#define PXP2_REG_PGL_ADDR_8C_F0 0x120538
#define PXP2_REG_PGL_ADDR_90_F0 0x12053c
#define PXP2_REG_PGL_ADDR_94_F0 0x120540
#define PXP2_REG_PGL_CONTROL0 0x120490
#define PXP2_REG_PGL_CONTROL1 0x120514
#define PXP2_REG_PGL_DEBUG 0x120520
/*
* [RW 32] third dword data of expansion rom request. this register i
* special. reading from it provides a vector outstanding read requests. if
* a bit is zero it means that a read request on the corresponding tag did
* not finish yet (not all completions have arrived for it)
*/
#define PXP2_REG_PGL_EXP_ROM2 0x120808
/*
* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask
* its[15:0]-address
*/
#define PXP2_REG_PGL_INT_CSDM_0 0x1204f4
#define PXP2_REG_PGL_INT_CSDM_1 0x1204f8
#define PXP2_REG_PGL_INT_CSDM_2 0x1204fc
#define PXP2_REG_PGL_INT_CSDM_3 0x120500
#define PXP2_REG_PGL_INT_CSDM_4 0x120504
#define PXP2_REG_PGL_INT_CSDM_5 0x120508
#define PXP2_REG_PGL_INT_CSDM_6 0x12050c
#define PXP2_REG_PGL_INT_CSDM_7 0x120510
/*
* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask
* its[15:0]-address
*/
#define PXP2_REG_PGL_INT_TSDM_0 0x120494
#define PXP2_REG_PGL_INT_TSDM_1 0x120498
#define PXP2_REG_PGL_INT_TSDM_2 0x12049c
#define PXP2_REG_PGL_INT_TSDM_3 0x1204a0
#define PXP2_REG_PGL_INT_TSDM_4 0x1204a4
#define PXP2_REG_PGL_INT_TSDM_5 0x1204a8
#define PXP2_REG_PGL_INT_TSDM_6 0x1204ac
#define PXP2_REG_PGL_INT_TSDM_7 0x1204b0
/*
* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask
* its[15:0]-address
*/
#define PXP2_REG_PGL_INT_USDM_0 0x1204b4
#define PXP2_REG_PGL_INT_USDM_1 0x1204b8
#define PXP2_REG_PGL_INT_USDM_2 0x1204bc
#define PXP2_REG_PGL_INT_USDM_3 0x1204c0
#define PXP2_REG_PGL_INT_USDM_4 0x1204c4
#define PXP2_REG_PGL_INT_USDM_5 0x1204c8
#define PXP2_REG_PGL_INT_USDM_6 0x1204cc
#define PXP2_REG_PGL_INT_USDM_7 0x1204d0
/*
* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask
* its[15:0]-address
*/
#define PXP2_REG_PGL_INT_XSDM_0 0x1204d4
#define PXP2_REG_PGL_INT_XSDM_1 0x1204d8
#define PXP2_REG_PGL_INT_XSDM_2 0x1204dc
#define PXP2_REG_PGL_INT_XSDM_3 0x1204e0
#define PXP2_REG_PGL_INT_XSDM_4 0x1204e4
#define PXP2_REG_PGL_INT_XSDM_5 0x1204e8
#define PXP2_REG_PGL_INT_XSDM_6 0x1204ec
#define PXP2_REG_PGL_INT_XSDM_7 0x1204f0
/*
* [RW 3] this field allows one function to pretend being another functio
* when accessing any BAR mapped resource within the device. the value of
* the field is the number of the function that will be accessed
* effectively. after software write to this bit it must read it in order to
* know that the new value is updated.
*/
#define PXP2_REG_PGL_PRETEND_FUNC_F0 0x120674
/*
* [RW 3] this field allows one function to pretend being another functio
* when accessing any BAR mapped resource within the device. the value of
* the field is the number of the function that will be accessed
* effectively. after software write to this bit it must read it in order to
* know that the new value is updated.
*/
#define PXP2_REG_PGL_PRETEND_FUNC_F1 0x120678
/*
* [RW 3] this field allows one function to pretend being another functio
* when accessing any BAR mapped resource within the device. the value of
* the field is the number of the function that will be accessed
* effectively. after software write to this bit it must read it in order to
* know that the new value is updated.
*/
#define PXP2_REG_PGL_PRETEND_FUNC_F2 0x12067c
/*
* [RW 3] this field allows one function to pretend being another functio
* when accessing any BAR mapped resource within the device. the value of
* the field is the number of the function that will be accessed
* effectively. after software write to this bit it must read it in order to
* know that the new value is updated.
*/
#define PXP2_REG_PGL_PRETEND_FUNC_F3 0x120680
/*
* [RW 3] this field allows one function to pretend being another functio
* when accessing any BAR mapped resource within the device. the value of
* the field is the number of the function that will be accessed
* effectively. after software write to this bit it must read it in order to
* know that the new value is updated.
*/
#define PXP2_REG_PGL_PRETEND_FUNC_F4 0x120684
/*
* [RW 3] this field allows one function to pretend being another functio
* when accessing any BAR mapped resource within the device. the value of
* the field is the number of the function that will be accessed
* effectively. after software write to this bit it must read it in order to
* know that the new value is updated.
*/
#define PXP2_REG_PGL_PRETEND_FUNC_F5 0x120688
/*
* [RW 3] this field allows one function to pretend being another functio
* when accessing any BAR mapped resource within the device. the value of
* the field is the number of the function that will be accessed
* effectively. after software write to this bit it must read it in order to
* know that the new value is updated.
*/
#define PXP2_REG_PGL_PRETEND_FUNC_F6 0x12068c
/*
* [RW 3] this field allows one function to pretend being another functio
* when accessing any BAR mapped resource within the device. the value of
* the field is the number of the function that will be accessed
* effectively. after software write to this bit it must read it in order to
* know that the new value is updated.
*/
#define PXP2_REG_PGL_PRETEND_FUNC_F7 0x120690
/*
* [R 1] this bit indicates that a read request was blocked because o
* bus_master_en was deasserted.
*/
#define PXP2_REG_PGL_READ_BLOCKED 0x120568
#define PXP2_REG_PGL_TAGS_LIMIT 0x1205a8
/* [R 18] debug only */
#define PXP2_REG_PGL_TXW_CDTS 0x12052c
/*
* [R 1] this bit indicates that a write request was blocked because o
* bus_master_en was deasserted.
*/
#define PXP2_REG_PGL_WRITE_BLOCKED 0x120564
#define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
#define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
#define PXP2_REG_PSWRQ_BW_ADD28 0x120228
#define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
#define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
#define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
#define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc
#define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0
#define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c
#define PXP2_REG_PSWRQ_BW_L1 0x1202b0
#define PXP2_REG_PSWRQ_BW_L10 0x1202d4
#define PXP2_REG_PSWRQ_BW_L11 0x1202d8
#define PXP2_REG_PSWRQ_BW_L2 0x1202b4
#define PXP2_REG_PSWRQ_BW_L28 0x120318
#define PXP2_REG_PSWRQ_BW_L3 0x1202b8
#define PXP2_REG_PSWRQ_BW_L6 0x1202c4
#define PXP2_REG_PSWRQ_BW_L7 0x1202c8
#define PXP2_REG_PSWRQ_BW_L8 0x1202cc
#define PXP2_REG_PSWRQ_BW_L9 0x1202d0
#define PXP2_REG_PSWRQ_BW_RD 0x120324
#define PXP2_REG_PSWRQ_BW_UB1 0x120238
#define PXP2_REG_PSWRQ_BW_UB10 0x12025c
#define PXP2_REG_PSWRQ_BW_UB11 0x120260
#define PXP2_REG_PSWRQ_BW_UB2 0x12023c
#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
#define PXP2_REG_PSWRQ_BW_UB3 0x120240
#define PXP2_REG_PSWRQ_BW_UB6 0x12024c
#define PXP2_REG_PSWRQ_BW_UB7 0x120250
#define PXP2_REG_PSWRQ_BW_UB8 0x120254
#define PXP2_REG_PSWRQ_BW_UB9 0x120258
#define PXP2_REG_PSWRQ_BW_WR 0x120328
#define PXP2_REG_PSWRQ_CDU0_L2P 0x120000
#define PXP2_REG_PSWRQ_QM0_L2P 0x120038
#define PXP2_REG_PSWRQ_SRC0_L2P 0x120054
#define PXP2_REG_PSWRQ_TM0_L2P 0x12001c
#define PXP2_REG_PSWRQ_TSDM0_L2P 0x1200e0
/* [RW 32] Interrupt mask register #0 read/write */
#define PXP2_REG_PXP2_INT_MASK_0 0x120578
/* [R 32] Interrupt register #0 read */
#define PXP2_REG_PXP2_INT_STS_0 0x12056c
#define PXP2_REG_PXP2_INT_STS_1 0x120608
/* [RC 32] Interrupt register #0 read clear */
#define PXP2_REG_PXP2_INT_STS_CLR_0 0x120570
/* [RW 32] Parity mask register #0 read/write */
#define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
#define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
/* [R 32] Parity register #0 read */
#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c
#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c
/*
* [R 1] Debug only: The 'almost full' indication from each fifo (give
* indication about backpressure)
*/
#define PXP2_REG_RD_ALMOST_FULL_0 0x120424
/* [R 8] Debug only: The blocks counter - number of unused block ids */
#define PXP2_REG_RD_BLK_CNT 0x120418
/*
* [RW 8] Debug only: Total number of available blocks in Tetris Buffer
* Must be bigger than 6. Normally should not be changed.
*/
#define PXP2_REG_RD_BLK_NUM_CFG 0x12040c
/* [RW 2] CDU byte swapping mode configuration for master read requests */
#define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404
/* [RW 1] When '1'; inputs to the PSWRD block are ignored */
#define PXP2_REG_RD_DISABLE_INPUTS 0x120374
/* [R 1] PSWRD internal memories initialization is done */
#define PXP2_REG_RD_INIT_DONE 0x120370
/*
* [RW 8] The maximum number of blocks in Tetris Buffer that can b
* allocated for vq10.
*/
#define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0
/*
* [RW 8] The maximum number of blocks in Tetris Buffer that can b
* allocated for vq11
*/
#define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4
/*
* [RW 8] The maximum number of blocks in Tetris Buffer that can b
* allocated for vq17
*/
#define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc
/*
* [RW 8] The maximum number of blocks in Tetris Buffer that can b
* allocated for vq18
*/
#define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0
/*
* [RW 8] The maximum number of blocks in Tetris Buffer that can b
* allocated for vq19
*/
#define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4
/*
* [RW 8] The maximum number of blocks in Tetris Buffer that can b
* allocated for vq22
*/
#define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0
/*
* [RW 8] The maximum number of blocks in Tetris Buffer that can b
* allocated for vq25
*/
#define PXP2_REG_RD_MAX_BLKS_VQ25 0x1203dc
/*
* [RW 8] The maximum number of blocks in Tetris Buffer that can b
* allocated for vq6
*/
#define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390
/*
* [RW 8] The maximum number of blocks in Tetris Buffer that can b
* allocated for vq9
*/
#define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c
/* [RW 2] PBF byte swapping mode configuration for master read requests */
#define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4
/* [R 1] Debug only: Indication if delivery ports are idle */
#define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c
#define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420
/* [RW 2] QM byte swapping mode configuration for master read requests */
#define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8
/* [R 7] Debug only: The SR counter - number of unused sub request ids */
#define PXP2_REG_RD_SR_CNT 0x120414
/* [RW 2] SRC byte swapping mode configuration for master read requests */
#define PXP2_REG_RD_SRC_SWAP_MODE 0x120400
/*
* [RW 7] Debug only: Total number of available PCI read sub-requests. Mus
* be bigger than 1. Normally should not be changed.
*/
#define PXP2_REG_RD_SR_NUM_CFG 0x120408
/* [RW 1] Signals the PSWRD block to start initializing internal memories */
#define PXP2_REG_RD_START_INIT 0x12036c
/* [RW 2] TM byte swapping mode configuration for master read requests */
#define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc
/* [RW 10] Bandwidth addition to VQ0 write requests */
#define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc
/* [RW 10] Bandwidth addition to VQ12 read requests */
#define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec
/* [RW 10] Bandwidth addition to VQ13 read requests */
#define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0
/* [RW 10] Bandwidth addition to VQ14 read requests */
#define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4
/* [RW 10] Bandwidth addition to VQ15 read requests */
#define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8
/* [RW 10] Bandwidth addition to VQ16 read requests */
#define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc
/* [RW 10] Bandwidth addition to VQ17 read requests */
#define PXP2_REG_RQ_BW_RD_ADD17 0x120200
/* [RW 10] Bandwidth addition to VQ18 read requests */
#define PXP2_REG_RQ_BW_RD_ADD18 0x120204
/* [RW 10] Bandwidth addition to VQ19 read requests */
#define PXP2_REG_RQ_BW_RD_ADD19 0x120208
/* [RW 10] Bandwidth addition to VQ20 read requests */
#define PXP2_REG_RQ_BW_RD_ADD20 0x12020c
/* [RW 10] Bandwidth addition to VQ22 read requests */
#define PXP2_REG_RQ_BW_RD_ADD22 0x120210
/* [RW 10] Bandwidth addition to VQ23 read requests */
#define PXP2_REG_RQ_BW_RD_ADD23 0x120214
/* [RW 10] Bandwidth addition to VQ24 read requests */
#define PXP2_REG_RQ_BW_RD_ADD24 0x120218
/* [RW 10] Bandwidth addition to VQ25 read requests */
#define PXP2_REG_RQ_BW_RD_ADD25 0x12021c
/* [RW 10] Bandwidth addition to VQ26 read requests */
#define PXP2_REG_RQ_BW_RD_ADD26 0x120220
/* [RW 10] Bandwidth addition to VQ27 read requests */
#define PXP2_REG_RQ_BW_RD_ADD27 0x120224
/* [RW 10] Bandwidth addition to VQ4 read requests */
#define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc
/* [RW 10] Bandwidth addition to VQ5 read requests */
#define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0
/* [RW 10] Bandwidth Typical L for VQ0 Read requests */
#define PXP2_REG_RQ_BW_RD_L0 0x1202ac
/* [RW 10] Bandwidth Typical L for VQ12 Read requests */
#define PXP2_REG_RQ_BW_RD_L12 0x1202dc
/* [RW 10] Bandwidth Typical L for VQ13 Read requests */
#define PXP2_REG_RQ_BW_RD_L13 0x1202e0
/* [RW 10] Bandwidth Typical L for VQ14 Read requests */
#define PXP2_REG_RQ_BW_RD_L14 0x1202e4
/* [RW 10] Bandwidth Typical L for VQ15 Read requests */
#define PXP2_REG_RQ_BW_RD_L15 0x1202e8
/* [RW 10] Bandwidth Typical L for VQ16 Read requests */
#define PXP2_REG_RQ_BW_RD_L16 0x1202ec
/* [RW 10] Bandwidth Typical L for VQ17 Read requests */
#define PXP2_REG_RQ_BW_RD_L17 0x1202f0
/* [RW 10] Bandwidth Typical L for VQ18 Read requests */
#define PXP2_REG_RQ_BW_RD_L18 0x1202f4
/* [RW 10] Bandwidth Typical L for VQ19 Read requests */
#define PXP2_REG_RQ_BW_RD_L19 0x1202f8
/* [RW 10] Bandwidth Typical L for VQ20 Read requests */
#define PXP2_REG_RQ_BW_RD_L20 0x1202fc
/* [RW 10] Bandwidth Typical L for VQ22 Read requests */
#define PXP2_REG_RQ_BW_RD_L22 0x120300
/* [RW 10] Bandwidth Typical L for VQ23 Read requests */
#define PXP2_REG_RQ_BW_RD_L23 0x120304
/* [RW 10] Bandwidth Typical L for VQ24 Read requests */
#define PXP2_REG_RQ_BW_RD_L24 0x120308
/* [RW 10] Bandwidth Typical L for VQ25 Read requests */
#define PXP2_REG_RQ_BW_RD_L25 0x12030c
/* [RW 10] Bandwidth Typical L for VQ26 Read requests */
#define PXP2_REG_RQ_BW_RD_L26 0x120310
/* [RW 10] Bandwidth Typical L for VQ27 Read requests */
#define PXP2_REG_RQ_BW_RD_L27 0x120314
/* [RW 10] Bandwidth Typical L for VQ4 Read requests */
#define PXP2_REG_RQ_BW_RD_L4 0x1202bc
/* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
#define PXP2_REG_RQ_BW_RD_L5 0x1202c0
/* [RW 7] Bandwidth upper bound for VQ0 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234
/* [RW 7] Bandwidth upper bound for VQ12 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264
/* [RW 7] Bandwidth upper bound for VQ13 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268
/* [RW 7] Bandwidth upper bound for VQ14 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c
/* [RW 7] Bandwidth upper bound for VQ15 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270
/* [RW 7] Bandwidth upper bound for VQ16 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274
/* [RW 7] Bandwidth upper bound for VQ17 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278
/* [RW 7] Bandwidth upper bound for VQ18 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c
/* [RW 7] Bandwidth upper bound for VQ19 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280
/* [RW 7] Bandwidth upper bound for VQ20 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284
/* [RW 7] Bandwidth upper bound for VQ22 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288
/* [RW 7] Bandwidth upper bound for VQ23 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c
/* [RW 7] Bandwidth upper bound for VQ24 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290
/* [RW 7] Bandwidth upper bound for VQ25 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294
/* [RW 7] Bandwidth upper bound for VQ26 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298
/* [RW 7] Bandwidth upper bound for VQ27 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c
/* [RW 7] Bandwidth upper bound for VQ4 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244
/* [RW 7] Bandwidth upper bound for VQ5 read requests */
#define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248
/* [RW 10] Bandwidth addition to VQ29 write requests */
#define PXP2_REG_RQ_BW_WR_ADD29 0x12022c
/* [RW 10] Bandwidth addition to VQ30 write requests */
#define PXP2_REG_RQ_BW_WR_ADD30 0x120230
/* [RW 10] Bandwidth Typical L for VQ29 Write requests */
#define PXP2_REG_RQ_BW_WR_L29 0x12031c
/* [RW 10] Bandwidth Typical L for VQ30 Write requests */
#define PXP2_REG_RQ_BW_WR_L30 0x120320
/* [RW 7] Bandwidth upper bound for VQ29 */
#define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4
/* [RW 7] Bandwidth upper bound for VQ30 */
#define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8
/* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
#define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR 0x120008
/* [RW 2] Endian mode for cdu */
#define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0
#define PXP2_REG_RQ_CDU_FIRST_ILT 0x12061c
#define PXP2_REG_RQ_CDU_LAST_ILT 0x120620
/*
* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k
* -128k
*/
#define PXP2_REG_RQ_CDU_P_SIZE 0x120018
/*
* [R 1] 1' indicates that the requester has finished its interna
* configuration
*/
#define PXP2_REG_RQ_CFG_DONE 0x1201b4
/* [RW 2] Endian mode for debug */
#define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4
/*
* [RW 1] When '1'; requests will enter input buffers but wont get ou
* towards the glue
*/
#define PXP2_REG_RQ_DISABLE_INPUTS 0x120330
/* [RW 1] 1 - SR will be aligned by 64B; 0 - SR will be aligned by 8B */
#define PXP2_REG_RQ_DRAM_ALIGN 0x1205b0
/*
* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt wil
* be asserted
*/
#define PXP2_REG_RQ_ELT_DISABLE 0x12066c
/* [RW 2] Endian mode for hc */
#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
/*
* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for bac
* compatibility needs; Note that different registers are used per mode
*/
#define PXP2_REG_RQ_ILT_MODE 0x1205b4
/* [WB 53] Onchip address table */
#define PXP2_REG_RQ_ONCHIP_AT 0x122000
/* [WB 53] Onchip address table - B0 */
#define PXP2_REG_RQ_ONCHIP_AT_B0 0x128000
/* [RW 13] Pending read limiter threshold; in Dwords */
#define PXP2_REG_RQ_PDR_LIMIT 0x12033c
/* [RW 2] Endian mode for qm */
#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
#define PXP2_REG_RQ_QM_FIRST_ILT 0x120634
#define PXP2_REG_RQ_QM_LAST_ILT 0x120638
/*
* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k
* -128k
*/
#define PXP2_REG_RQ_QM_P_SIZE 0x120050
/* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
#define PXP2_REG_RQ_RBC_DONE 0x1201b0
/*
* [RW 3] Max burst size filed for read requests port 0; 000 - 128B
* 001:256B; 010: 512B; 11:1K:100:2K; 01:4K
*/
#define PXP2_REG_RQ_RD_MBS0 0x120160
/*
* [RW 3] Max burst size filed for read requests port 1; 000 - 128B
* 001:256B; 010: 512B; 11:1K:100:2K; 01:4K
*/
#define PXP2_REG_RQ_RD_MBS1 0x120168
/* [RW 2] Endian mode for src */
#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
#define PXP2_REG_RQ_SRC_FIRST_ILT 0x12063c
#define PXP2_REG_RQ_SRC_LAST_ILT 0x120640
/*
* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k
* -128k
*/
#define PXP2_REG_RQ_SRC_P_SIZE 0x12006c
/* [RW 2] Endian mode for tm */
#define PXP2_REG_RQ_TM_ENDIAN_M 0x120198
#define PXP2_REG_RQ_TM_FIRST_ILT 0x120644
#define PXP2_REG_RQ_TM_LAST_ILT 0x120648
/*
* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k
* -128k
*/
#define PXP2_REG_RQ_TM_P_SIZE 0x120034
/* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
#define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c
/* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
#define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR 0x120094
/* [R 8] Number of entries occupied by vq 0 in pswrq memory */
#define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810
/* [R 8] Number of entries occupied by vq 10 in pswrq memory */
#define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818
/* [R 8] Number of entries occupied by vq 11 in pswrq memory */
#define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820
/* [R 8] Number of entries occupied by vq 12 in pswrq memory */
#define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828
/* [R 8] Number of entries occupied by vq 13 in pswrq memory */
#define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830
/* [R 8] Number of entries occupied by vq 14 in pswrq memory */
#define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838
/* [R 8] Number of entries occupied by vq 15 in pswrq memory */
#define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840
/* [R 8] Number of entries occupied by vq 16 in pswrq memory */
#define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848
/* [R 8] Number of entries occupied by vq 17 in pswrq memory */
#define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850
/* [R 8] Number of entries occupied by vq 18 in pswrq memory */
#define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858
/* [R 8] Number of entries occupied by vq 19 in pswrq memory */
#define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860
/* [R 8] Number of entries occupied by vq 1 in pswrq memory */
#define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868
/* [R 8] Number of entries occupied by vq 20 in pswrq memory */
#define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870
/* [R 8] Number of entries occupied by vq 21 in pswrq memory */
#define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878
/* [R 8] Number of entries occupied by vq 22 in pswrq memory */
#define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880
/* [R 8] Number of entries occupied by vq 23 in pswrq memory */
#define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888
/* [R 8] Number of entries occupied by vq 24 in pswrq memory */
#define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890
/* [R 8] Number of entries occupied by vq 25 in pswrq memory */
#define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898
/* [R 8] Number of entries occupied by vq 26 in pswrq memory */
#define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0
/* [R 8] Number of entries occupied by vq 27 in pswrq memory */
#define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8
/* [R 8] Number of entries occupied by vq 28 in pswrq memory */
#define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0
/* [R 8] Number of entries occupied by vq 29 in pswrq memory */
#define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8
/* [R 8] Number of entries occupied by vq 2 in pswrq memory */
#define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0
/* [R 8] Number of entries occupied by vq 30 in pswrq memory */
#define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8
/* [R 8] Number of entries occupied by vq 31 in pswrq memory */
#define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0
/* [R 8] Number of entries occupied by vq 3 in pswrq memory */
#define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8
/* [R 8] Number of entries occupied by vq 4 in pswrq memory */
#define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0
/* [R 8] Number of entries occupied by vq 5 in pswrq memory */
#define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8
/* [R 8] Number of entries occupied by vq 6 in pswrq memory */
#define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0
/* [R 8] Number of entries occupied by vq 7 in pswrq memory */
#define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8
/* [R 8] Number of entries occupied by vq 8 in pswrq memory */
#define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900
/* [R 8] Number of entries occupied by vq 9 in pswrq memory */
#define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908
/*
* [RW 3] Max burst size filed for write requests port 0; 000 - 128B
* 001:256B; 010: 512B;
*/
#define PXP2_REG_RQ_WR_MBS0 0x12015c
/*
* [RW 3] Max burst size filed for write requests port 1; 000 - 128B
* 001:256B; 010: 512B;
*/
#define PXP2_REG_RQ_WR_MBS1 0x120164
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_CDU_MPS 0x1205f0
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_CSDM_MPS 0x1205d0
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_DBG_MPS 0x1205e8
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_DMAE_MPS 0x1205ec
/*
* [RW 10] if Number of entries in dmae fifo will be higher than thi
* threshold then has_payload indication will be asserted; the default value
* should be equal to &gt; write MBS size!
*/
#define PXP2_REG_WR_DMAE_TH 0x120368
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_HC_MPS 0x1205c8
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_QM_MPS 0x1205dc
/* [RW 1] 0 - working in A0 mode; - working in B0 mode */
#define PXP2_REG_WR_REV_MODE 0x120670
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_SRC_MPS 0x1205e4
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_TM_MPS 0x1205e0
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_TSDM_MPS 0x1205d4
/*
* [RW 10] if Number of entries in usdmdp fifo will be higher than thi
* threshold then has_payload indication will be asserted; the default value
* should be equal to &gt; write MBS size!
*/
#define PXP2_REG_WR_USDMDP_TH 0x120348
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_USDM_MPS 0x1205cc
/*
* [RW 2] 0 - 128B; - 256B; - 512B; - 1024B; when the payload in th
* buffer reaches this number has_payload will be asserted
*/
#define PXP2_REG_WR_XSDM_MPS 0x1205d8
/* [R 1] debug only: Indication if PSWHST arbiter is idle */
#define PXP_REG_HST_ARB_IS_IDLE 0x103004
/*
* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' mean
* this client is waiting for the arbiter.
*/
#define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008
/*
* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bi
* should update accoring to 'hst_discard_doorbells' register when the state
* machine is idle
*/
#define PXP_REG_HST_DISCARD_DOORBELLS_STATUS 0x1030a0
/*
* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1
* means this PSWHST is discarding inputs from this client. Each bit should
* update accoring to 'hst_discard_internal_writes' register when the state
* machine is idle.
*/
#define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS 0x10309c
/* [WB 160] Used for initialization of the inbound interrupts memory */
#define PXP_REG_HST_INBOUND_INT 0x103800
/* [RW 32] Interrupt mask register #0 read/write */
#define PXP_REG_PXP_INT_MASK_0 0x103074
#define PXP_REG_PXP_INT_MASK_1 0x103084
/* [R 32] Interrupt register #0 read */
#define PXP_REG_PXP_INT_STS_0 0x103068
#define PXP_REG_PXP_INT_STS_1 0x103078
/* [RC 32] Interrupt register #0 read clear */
#define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
/* [RW 26] Parity mask register #0 read/write */
#define PXP_REG_PXP_PRTY_MASK 0x103094
/* [R 26] Parity register #0 read */
#define PXP_REG_PXP_PRTY_STS 0x103088
/*
* [RW 4] The activity counter initial increment value sent in the loa
* request
*/
#define QM_REG_ACTCTRINITVAL_0 0x168040
#define QM_REG_ACTCTRINITVAL_1 0x168044
#define QM_REG_ACTCTRINITVAL_2 0x168048
#define QM_REG_ACTCTRINITVAL_3 0x16804c
/*
* [RW 32] The base logical address (in bytes) of each physical queue. Th
* index I represents the physical queue number. The 12 lsbs are ignore and
* considered zero so practically there are only 20 bits in this register;
* queues 63-0
*/
#define QM_REG_BASEADDR 0x168900
/*
* [RW 32] The base logical address (in bytes) of each physical queue. Th
* index I represents the physical queue number. The 12 lsbs are ignore and
* considered zero so practically there are only 20 bits in this register;
* queues 127-64
*/
#define QM_REG_BASEADDR_EXT_A 0x16e100
/* [RW 16] The byte credit cost for each task. This value is for both ports */
#define QM_REG_BYTECRDCOST 0x168234
/* [RW 16] The initial byte credit value for both ports. */
#define QM_REG_BYTECRDINITVAL 0x168238
/*
* [RW 32] A bit per physical queue. If the bit is cleared then the physica
* queue uses port 0 else it uses port 1; queues 31-0
*/
#define QM_REG_BYTECRDPORT_LSB 0x168228
/*
* [RW 32] A bit per physical queue. If the bit is cleared then the physica
* queue uses port 0 else it uses port 1; queues 95-64
*/
#define QM_REG_BYTECRDPORT_LSB_EXT_A 0x16e520
/*
* [RW 32] A bit per physical queue. If the bit is cleared then the physica
* queue uses port 0 else it uses port 1; queues 63-32
*/
#define QM_REG_BYTECRDPORT_MSB 0x168224
/*
* [RW 32] A bit per physical queue. If the bit is cleared then the physica
* queue uses port 0 else it uses port 1; queues 127-96
*/
#define QM_REG_BYTECRDPORT_MSB_EXT_A 0x16e51c
/*
* [RW 16] The byte credit value that if above the QM is considered almos
* full
*/
#define QM_REG_BYTECREDITAFULLTHR 0x168094
/* [RW 4] The initial credit for interface */
#define QM_REG_CMINITCRD_0 0x1680cc
#define QM_REG_CMINITCRD_1 0x1680d0
#define QM_REG_CMINITCRD_2 0x1680d4
#define QM_REG_CMINITCRD_3 0x1680d8
#define QM_REG_CMINITCRD_4 0x1680dc
#define QM_REG_CMINITCRD_5 0x1680e0
#define QM_REG_CMINITCRD_6 0x1680e4
#define QM_REG_CMINITCRD_7 0x1680e8
/*
* [RW 8] A mask bit per CM interface. If this bit is 0 then this interfac
* is masked
*/
#define QM_REG_CMINTEN 0x1680ec
/*
* [RW 12] A bit vector which indicates which one of the queues are tied t
* interface 0
*/
#define QM_REG_CMINTVOQMASK_0 0x1681f4
#define QM_REG_CMINTVOQMASK_1 0x1681f8
#define QM_REG_CMINTVOQMASK_2 0x1681fc
#define QM_REG_CMINTVOQMASK_3 0x168200
#define QM_REG_CMINTVOQMASK_4 0x168204
#define QM_REG_CMINTVOQMASK_5 0x168208
#define QM_REG_CMINTVOQMASK_6 0x16820c
#define QM_REG_CMINTVOQMASK_7 0x168210
/*
* [RW 20] The number of connections divided by 16 which dictates the siz
* of each queue which belongs to even function number.
*/
#define QM_REG_CONNNUM_0 0x168020
/* [R 6] Keep the fill level of the fifo from write client 4 */
#define QM_REG_CQM_WRC_FIFOLVL 0x168018
/* [RW 8] The context regions sent in the CFC load request */
#define QM_REG_CTXREG_0 0x168030
#define QM_REG_CTXREG_1 0x168034
#define QM_REG_CTXREG_2 0x168038
#define QM_REG_CTXREG_3 0x16803c
/*
* [RW 12] The VOQ mask used to select the VOQs which needs to be full fo
* bypass enable
*/
#define QM_REG_ENBYPVOQMASK 0x16823c
/*
* [RW 32] A bit mask per each physical queue. If a bit is set then th
* physical queue uses the byte credit; queues 31-0
*/
#define QM_REG_ENBYTECRD_LSB 0x168220
/*
* [RW 32] A bit mask per each physical queue. If a bit is set then th
* physical queue uses the byte credit; queues 95-64
*/
#define QM_REG_ENBYTECRD_LSB_EXT_A 0x16e518
/*
* [RW 32] A bit mask per each physical queue. If a bit is set then th
* physical queue uses the byte credit; queues 63-32
*/
#define QM_REG_ENBYTECRD_MSB 0x16821c
/*
* [RW 32] A bit mask per each physical queue. If a bit is set then th
* physical queue uses the byte credit; queues 127-96
*/
#define QM_REG_ENBYTECRD_MSB_EXT_A 0x16e514
/*
* [RW 4] If cleared then the secondary interface will not be served by th
* RR arbiter
*/
#define QM_REG_ENSEC 0x1680f0
/* [RW 32] NA */
#define QM_REG_FUNCNUMSEL_LSB 0x168230
/* [RW 32] NA */
#define QM_REG_FUNCNUMSEL_MSB 0x16822c
/*
* [RW 32] A mask register to mask the Almost empty signals which will no
* be use for the almost empty indication to the HW block; queues 31:0
*/
#define QM_REG_HWAEMPTYMASK_LSB 0x168218
/*
* [RW 32] A mask register to mask the Almost empty signals which will no
* be use for the almost empty indication to the HW block; queues 95-64
*/
#define QM_REG_HWAEMPTYMASK_LSB_EXT_A 0x16e510
/*
* [RW 32] A mask register to mask the Almost empty signals which will no
* be use for the almost empty indication to the HW block; queues 63:32
*/
#define QM_REG_HWAEMPTYMASK_MSB 0x168214
/*
* [RW 32] A mask register to mask the Almost empty signals which will no
* be use for the almost empty indication to the HW block; queues 127-96
*/
#define QM_REG_HWAEMPTYMASK_MSB_EXT_A 0x16e50c
/* [RW 4] The number of outstanding request to CFC */
#define QM_REG_OUTLDREQ 0x168804
/*
* [RC 1] A flag to indicate that overflow error occurred in one of th
* queues.
*/
#define QM_REG_OVFERROR 0x16805c
/* [RC 7] the Q were the qverflow occurs */
#define QM_REG_OVFQNUM 0x168058
/* [R 16] Pause state for physical queues 15-0 */
#define QM_REG_PAUSESTATE0 0x168410
/* [R 16] Pause state for physical queues 31-16 */
#define QM_REG_PAUSESTATE1 0x168414
/* [R 16] Pause state for physical queues 47-32 */
#define QM_REG_PAUSESTATE2 0x16e684
/* [R 16] Pause state for physical queues 63-48 */
#define QM_REG_PAUSESTATE3 0x16e688
/* [R 16] Pause state for physical queues 79-64 */
#define QM_REG_PAUSESTATE4 0x16e68c
/* [R 16] Pause state for physical queues 95-80 */
#define QM_REG_PAUSESTATE5 0x16e690
/* [R 16] Pause state for physical queues 111-96 */
#define QM_REG_PAUSESTATE6 0x16e694
/* [R 16] Pause state for physical queues 127-112 */
#define QM_REG_PAUSESTATE7 0x16e698
/* [RW 2] The PCI attributes field used in the PCI request. */
#define QM_REG_PCIREQAT 0x168054
/* [R 16] The byte credit of port 0 */
#define QM_REG_PORT0BYTECRD 0x168300
/* [R 16] The byte credit of port 1 */
#define QM_REG_PORT1BYTECRD 0x168304
/* [RW 3] pci function number of queues 15-0 */
#define QM_REG_PQ2PCIFUNC_0 0x16e6bc
#define QM_REG_PQ2PCIFUNC_1 0x16e6c0
#define QM_REG_PQ2PCIFUNC_2 0x16e6c4
#define QM_REG_PQ2PCIFUNC_3 0x16e6c8
#define QM_REG_PQ2PCIFUNC_4 0x16e6cc
#define QM_REG_PQ2PCIFUNC_5 0x16e6d0
#define QM_REG_PQ2PCIFUNC_6 0x16e6d4
#define QM_REG_PQ2PCIFUNC_7 0x16e6d8
/*
* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow
* ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
* bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank;
*/
#define QM_REG_PTRTBL 0x168a00
/*
* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow
* ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
* bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank;
*/
#define QM_REG_PTRTBL_EXT_A 0x16e200
/* [RW 2] Interrupt mask register #0 read/write */
#define QM_REG_QM_INT_MASK 0x168444
/* [R 2] Interrupt register #0 read */
#define QM_REG_QM_INT_STS 0x168438
/* [RW 12] Parity mask register #0 read/write */
#define QM_REG_QM_PRTY_MASK 0x168454
/* [R 12] Parity register #0 read */
#define QM_REG_QM_PRTY_STS 0x168448
/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
#define QM_REG_QSTATUS_HIGH 0x16802c
/* [R 32] Current queues in pipeline: Queues from 96 to 127 */
#define QM_REG_QSTATUS_HIGH_EXT_A 0x16e408
/* [R 32] Current queues in pipeline: Queues from 0 to 31 */
#define QM_REG_QSTATUS_LOW 0x168028
/* [R 32] Current queues in pipeline: Queues from 64 to 95 */
#define QM_REG_QSTATUS_LOW_EXT_A 0x16e404
/* [R 24] The number of tasks queued for each queue; queues 63-0 */
#define QM_REG_QTASKCTR_0 0x168308
/* [R 24] The number of tasks queued for each queue; queues 127-64 */
#define QM_REG_QTASKCTR_EXT_A_0 0x16e584
/* [RW 4] Queue tied to VOQ */
#define QM_REG_QVOQIDX_0 0x1680f4
#define QM_REG_QVOQIDX_10 0x16811c
#define QM_REG_QVOQIDX_100 0x16e49c
#define QM_REG_QVOQIDX_101 0x16e4a0
#define QM_REG_QVOQIDX_102 0x16e4a4
#define QM_REG_QVOQIDX_103 0x16e4a8
#define QM_REG_QVOQIDX_104 0x16e4ac
#define QM_REG_QVOQIDX_105 0x16e4b0
#define QM_REG_QVOQIDX_106 0x16e4b4
#define QM_REG_QVOQIDX_107 0x16e4b8
#define QM_REG_QVOQIDX_108 0x16e4bc
#define QM_REG_QVOQIDX_109 0x16e4c0
#define QM_REG_QVOQIDX_11 0x168120
#define QM_REG_QVOQIDX_110 0x16e4c4
#define QM_REG_QVOQIDX_111 0x16e4c8
#define QM_REG_QVOQIDX_112 0x16e4cc
#define QM_REG_QVOQIDX_113 0x16e4d0
#define QM_REG_QVOQIDX_114 0x16e4d4
#define QM_REG_QVOQIDX_115 0x16e4d8
#define QM_REG_QVOQIDX_116 0x16e4dc
#define QM_REG_QVOQIDX_117 0x16e4e0
#define QM_REG_QVOQIDX_118 0x16e4e4
#define QM_REG_QVOQIDX_119 0x16e4e8
#define QM_REG_QVOQIDX_12 0x168124
#define QM_REG_QVOQIDX_120 0x16e4ec
#define QM_REG_QVOQIDX_121 0x16e4f0
#define QM_REG_QVOQIDX_122 0x16e4f4
#define QM_REG_QVOQIDX_123 0x16e4f8
#define QM_REG_QVOQIDX_124 0x16e4fc
#define QM_REG_QVOQIDX_125 0x16e500
#define QM_REG_QVOQIDX_126 0x16e504
#define QM_REG_QVOQIDX_127 0x16e508
#define QM_REG_QVOQIDX_13 0x168128
#define QM_REG_QVOQIDX_14 0x16812c
#define QM_REG_QVOQIDX_15 0x168130
#define QM_REG_QVOQIDX_16 0x168134
#define QM_REG_QVOQIDX_17 0x168138
#define QM_REG_QVOQIDX_21 0x168148
#define QM_REG_QVOQIDX_22 0x16814c
#define QM_REG_QVOQIDX_23 0x168150
#define QM_REG_QVOQIDX_24 0x168154
#define QM_REG_QVOQIDX_25 0x168158
#define QM_REG_QVOQIDX_26 0x16815c
#define QM_REG_QVOQIDX_27 0x168160
#define QM_REG_QVOQIDX_28 0x168164
#define QM_REG_QVOQIDX_29 0x168168
#define QM_REG_QVOQIDX_30 0x16816c
#define QM_REG_QVOQIDX_31 0x168170
#define QM_REG_QVOQIDX_32 0x168174
#define QM_REG_QVOQIDX_33 0x168178
#define QM_REG_QVOQIDX_34 0x16817c
#define QM_REG_QVOQIDX_35 0x168180
#define QM_REG_QVOQIDX_36 0x168184
#define QM_REG_QVOQIDX_37 0x168188
#define QM_REG_QVOQIDX_38 0x16818c
#define QM_REG_QVOQIDX_39 0x168190
#define QM_REG_QVOQIDX_40 0x168194
#define QM_REG_QVOQIDX_41 0x168198
#define QM_REG_QVOQIDX_42 0x16819c
#define QM_REG_QVOQIDX_43 0x1681a0
#define QM_REG_QVOQIDX_44 0x1681a4
#define QM_REG_QVOQIDX_45 0x1681a8
#define QM_REG_QVOQIDX_46 0x1681ac
#define QM_REG_QVOQIDX_47 0x1681b0
#define QM_REG_QVOQIDX_48 0x1681b4
#define QM_REG_QVOQIDX_49 0x1681b8
#define QM_REG_QVOQIDX_5 0x168108
#define QM_REG_QVOQIDX_50 0x1681bc
#define QM_REG_QVOQIDX_51 0x1681c0
#define QM_REG_QVOQIDX_52 0x1681c4
#define QM_REG_QVOQIDX_53 0x1681c8
#define QM_REG_QVOQIDX_54 0x1681cc
#define QM_REG_QVOQIDX_55 0x1681d0
#define QM_REG_QVOQIDX_56 0x1681d4
#define QM_REG_QVOQIDX_57 0x1681d8
#define QM_REG_QVOQIDX_58 0x1681dc
#define QM_REG_QVOQIDX_59 0x1681e0
#define QM_REG_QVOQIDX_6 0x16810c
#define QM_REG_QVOQIDX_60 0x1681e4
#define QM_REG_QVOQIDX_61 0x1681e8
#define QM_REG_QVOQIDX_62 0x1681ec
#define QM_REG_QVOQIDX_63 0x1681f0
#define QM_REG_QVOQIDX_64 0x16e40c
#define QM_REG_QVOQIDX_65 0x16e410
#define QM_REG_QVOQIDX_69 0x16e420
#define QM_REG_QVOQIDX_7 0x168110
#define QM_REG_QVOQIDX_70 0x16e424
#define QM_REG_QVOQIDX_71 0x16e428
#define QM_REG_QVOQIDX_72 0x16e42c
#define QM_REG_QVOQIDX_73 0x16e430
#define QM_REG_QVOQIDX_74 0x16e434
#define QM_REG_QVOQIDX_75 0x16e438
#define QM_REG_QVOQIDX_76 0x16e43c
#define QM_REG_QVOQIDX_77 0x16e440
#define QM_REG_QVOQIDX_78 0x16e444
#define QM_REG_QVOQIDX_79 0x16e448
#define QM_REG_QVOQIDX_8 0x168114
#define QM_REG_QVOQIDX_80 0x16e44c
#define QM_REG_QVOQIDX_81 0x16e450
#define QM_REG_QVOQIDX_85 0x16e460
#define QM_REG_QVOQIDX_86 0x16e464
#define QM_REG_QVOQIDX_87 0x16e468
#define QM_REG_QVOQIDX_88 0x16e46c
#define QM_REG_QVOQIDX_89 0x16e470
#define QM_REG_QVOQIDX_9 0x168118
#define QM_REG_QVOQIDX_90 0x16e474
#define QM_REG_QVOQIDX_91 0x16e478
#define QM_REG_QVOQIDX_92 0x16e47c
#define QM_REG_QVOQIDX_93 0x16e480
#define QM_REG_QVOQIDX_94 0x16e484
#define QM_REG_QVOQIDX_95 0x16e488
#define QM_REG_QVOQIDX_96 0x16e48c
#define QM_REG_QVOQIDX_97 0x16e490
#define QM_REG_QVOQIDX_98 0x16e494
#define QM_REG_QVOQIDX_99 0x16e498
/* [RW 1] Initialization bit command */
#define QM_REG_SOFT_RESET 0x168428
/* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
#define QM_REG_TASKCRDCOST_0 0x16809c
#define QM_REG_TASKCRDCOST_1 0x1680a0
#define QM_REG_TASKCRDCOST_2 0x1680a4
#define QM_REG_TASKCRDCOST_4 0x1680ac
#define QM_REG_TASKCRDCOST_5 0x1680b0
/* [R 6] Keep the fill level of the fifo from write client 3 */
#define QM_REG_TQM_WRC_FIFOLVL 0x168010
/* [R 6] Keep the fill level of the fifo from write client 2 */
#define QM_REG_UQM_WRC_FIFOLVL 0x168008
/* [RC 32] Credit update error register */
#define QM_REG_VOQCRDERRREG 0x168408
/* [R 16] The credit value for each VOQ */
#define QM_REG_VOQCREDIT_0 0x1682d0
#define QM_REG_VOQCREDIT_1 0x1682d4
#define QM_REG_VOQCREDIT_4 0x1682e0
/* [RW 16] The credit value that if above the QM is considered almost full */
#define QM_REG_VOQCREDITAFULLTHR 0x168090
/* [RW 16] The init and maximum credit for each VoQ */
#define QM_REG_VOQINITCREDIT_0 0x168060
#define QM_REG_VOQINITCREDIT_1 0x168064
#define QM_REG_VOQINITCREDIT_2 0x168068
#define QM_REG_VOQINITCREDIT_4 0x168070
#define QM_REG_VOQINITCREDIT_5 0x168074
/* [RW 1] The port of which VOQ belongs */
#define QM_REG_VOQPORT_0 0x1682a0
#define QM_REG_VOQPORT_1 0x1682a4
#define QM_REG_VOQPORT_2 0x1682a8
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_0_LSB 0x168240
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_0_LSB_EXT_A 0x16e524
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_0_MSB 0x168244
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_0_MSB_EXT_A 0x16e528
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_10_LSB 0x168290
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_10_LSB_EXT_A 0x16e574
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_10_MSB 0x168294
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_10_MSB_EXT_A 0x16e578
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_11_LSB 0x168298
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_11_LSB_EXT_A 0x16e57c
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_11_MSB 0x16829c
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_11_MSB_EXT_A 0x16e580
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_1_LSB 0x168248
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_1_LSB_EXT_A 0x16e52c
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_1_MSB 0x16824c
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_1_MSB_EXT_A 0x16e530
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_2_LSB 0x168250
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_2_LSB_EXT_A 0x16e534
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_2_MSB 0x168254
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_2_MSB_EXT_A 0x16e538
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_3_LSB 0x168258
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_3_LSB_EXT_A 0x16e53c
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_3_MSB_EXT_A 0x16e540
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_4_LSB 0x168260
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_4_LSB_EXT_A 0x16e544
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_4_MSB 0x168264
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_4_MSB_EXT_A 0x16e548
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_5_LSB 0x168268
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_5_LSB_EXT_A 0x16e54c
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_5_MSB 0x16826c
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_5_MSB_EXT_A 0x16e550
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_6_LSB 0x168270
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_6_LSB_EXT_A 0x16e554
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_6_MSB 0x168274
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_6_MSB_EXT_A 0x16e558
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_7_LSB 0x168278
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_7_LSB_EXT_A 0x16e55c
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_7_MSB 0x16827c
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_7_MSB_EXT_A 0x16e560
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_8_LSB 0x168280
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_8_LSB_EXT_A 0x16e564
/* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
#define QM_REG_VOQQMASK_8_MSB 0x168284
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_8_MSB_EXT_A 0x16e568
/* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
#define QM_REG_VOQQMASK_9_LSB 0x168288
/* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
#define QM_REG_VOQQMASK_9_LSB_EXT_A 0x16e56c
/* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
#define QM_REG_VOQQMASK_9_MSB_EXT_A 0x16e570
/* [RW 32] Wrr weights */
#define QM_REG_WRRWEIGHTS_0 0x16880c
#define QM_REG_WRRWEIGHTS_1 0x168810
#define QM_REG_WRRWEIGHTS_10 0x168814
#define QM_REG_WRRWEIGHTS_11 0x168818
#define QM_REG_WRRWEIGHTS_12 0x16881c
#define QM_REG_WRRWEIGHTS_13 0x168820
#define QM_REG_WRRWEIGHTS_14 0x168824
#define QM_REG_WRRWEIGHTS_15 0x168828
#define QM_REG_WRRWEIGHTS_16 0x16e000
#define QM_REG_WRRWEIGHTS_17 0x16e004
#define QM_REG_WRRWEIGHTS_18 0x16e008
#define QM_REG_WRRWEIGHTS_19 0x16e00c
#define QM_REG_WRRWEIGHTS_2 0x16882c
#define QM_REG_WRRWEIGHTS_20 0x16e010
#define QM_REG_WRRWEIGHTS_21 0x16e014
#define QM_REG_WRRWEIGHTS_22 0x16e018
#define QM_REG_WRRWEIGHTS_23 0x16e01c
#define QM_REG_WRRWEIGHTS_24 0x16e020
#define QM_REG_WRRWEIGHTS_25 0x16e024
#define QM_REG_WRRWEIGHTS_26 0x16e028
#define QM_REG_WRRWEIGHTS_27 0x16e02c
#define QM_REG_WRRWEIGHTS_28 0x16e030
#define QM_REG_WRRWEIGHTS_29 0x16e034
#define QM_REG_WRRWEIGHTS_3 0x168830
#define QM_REG_WRRWEIGHTS_30 0x16e038
#define QM_REG_WRRWEIGHTS_31 0x16e03c
#define QM_REG_WRRWEIGHTS_4 0x168834
#define QM_REG_WRRWEIGHTS_5 0x168838
#define QM_REG_WRRWEIGHTS_6 0x16883c
#define QM_REG_WRRWEIGHTS_7 0x168840
#define QM_REG_WRRWEIGHTS_8 0x168844
#define QM_REG_WRRWEIGHTS_9 0x168848
/* [R 6] Keep the fill level of the fifo from write client 1 */
#define QM_REG_XQM_WRC_FIFOLVL 0x168000
#define SRC_REG_COUNTFREE0 0x40500
/*
* [RW 1] If clr the searcher is compatible to E1 A0 - support only tw
* ports. If set the searcher support 8 functions.
*/
#define SRC_REG_E1HMF_ENABLE 0x404cc
#define SRC_REG_FIRSTFREE0 0x40510
#define SRC_REG_KEYRSS0_0 0x40408
#define SRC_REG_KEYRSS0_7 0x40424
#define SRC_REG_KEYRSS1_9 0x40454
#define SRC_REG_KEYSEARCH_0 0x40458
#define SRC_REG_KEYSEARCH_1 0x4045c
#define SRC_REG_KEYSEARCH_2 0x40460
#define SRC_REG_KEYSEARCH_3 0x40464
#define SRC_REG_KEYSEARCH_4 0x40468
#define SRC_REG_KEYSEARCH_5 0x4046c
#define SRC_REG_KEYSEARCH_6 0x40470
#define SRC_REG_KEYSEARCH_7 0x40474
#define SRC_REG_KEYSEARCH_8 0x40478
#define SRC_REG_KEYSEARCH_9 0x4047c
#define SRC_REG_LASTFREE0 0x40530
#define SRC_REG_NUMBER_HASH_BITS0 0x40400
/* [RW 1] Reset internal state machines. */
#define SRC_REG_SOFT_RST 0x4049c
/* [R 3] Interrupt register #0 read */
#define SRC_REG_SRC_INT_STS 0x404ac
/* [RW 3] Parity mask register #0 read/write */
#define SRC_REG_SRC_PRTY_MASK 0x404c8
/* [R 3] Parity register #0 read */
#define SRC_REG_SRC_PRTY_STS 0x404bc
/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
#define TCM_REG_CAM_OCCUP 0x5017c
/*
* [RW 1] CDU AG read Interface enable. If 0 - the request input i
* disregarded; valid output is deasserted; all other signals are treated as
* usual; if 1 - normal activity.
*/
#define TCM_REG_CDU_AG_RD_IFEN 0x50034
/*
* [RW 1] CDU AG write Interface enable. If 0 - the request and valid inpu
* are disregarded; all other signals are treated as usual; if 1 - normal
* activity.
*/
#define TCM_REG_CDU_AG_WR_IFEN 0x50030
/*
* [RW 1] CDU STORM read Interface enable. If 0 - the request input i
* disregarded; valid output is deasserted; all other signals are treated as
* usual; if 1 - normal activity.
*/
#define TCM_REG_CDU_SM_RD_IFEN 0x5003c
/*
* [RW 1] CDU STORM write Interface enable. If 0 - the request and vali
* input is disregarded; all other signals are treated as usual; if 1 -
* normal activity.
*/
#define TCM_REG_CDU_SM_WR_IFEN 0x50038
/*
* [RW 4] CFC output initial credit. Max credit available - 15.Write write
* the initial credit value; read returns the current value of the credit
* counter. Must be initialized to 1 at start-up.
*/
#define TCM_REG_CFC_INIT_CRD 0x50204
/*
* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_CP_WEIGHT 0x500c0
/*
* [RW 1] Input csem Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define TCM_REG_CSEM_IFEN 0x5002c
/*
* [RC 1] Message length mismatch (relative to last indication) at the In#
* interface.
*/
#define TCM_REG_CSEM_LENGTH_MIS 0x50174
/*
* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_CSEM_WEIGHT 0x500bc
/* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */
#define TCM_REG_ERR_EVNT_ID 0x500a0
/* [RW 28] The CM erroneous header for QM and Timers formatting. */
#define TCM_REG_ERR_TCM_HDR 0x5009c
/* [RW 8] The Event ID for Timers expiration. */
#define TCM_REG_EXPR_EVNT_ID 0x500a4
/*
* [RW 8] FIC0 output initial credit. Max credit available - 255.Writ
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 64 at start-up.
*/
#define TCM_REG_FIC0_INIT_CRD 0x5020c
/*
* [RW 8] FIC1 output initial credit. Max credit available - 255.Writ
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 64 at start-up.
*/
#define TCM_REG_FIC1_INIT_CRD 0x50210
/*
* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin;
* - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr;
* ~tcm_registers_gr_ld0_pr.gr_ld0_pr and
* ~tcm_registers_gr_ld1_pr.gr_ld1_pr.
*/
#define TCM_REG_GR_ARB_TYPE 0x50114
/*
* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; th
* highest priority is 3. It is supposed that the Store channel is the
* compliment of the other 3 groups.
*/
#define TCM_REG_GR_LD0_PR 0x5011c
/*
* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; th
* highest priority is 3. It is supposed that the Store channel is the
* compliment of the other 3 groups.
*/
#define TCM_REG_GR_LD1_PR 0x50120
/*
* [RW 4] The number of double REG-pairs; loaded from the STORM context an
* sent to STORM; for a specific connection type. The double REG-pairs are
* used to align to STORM context row size of 128 bits. The offset of these
* data in the STORM context is always 0. Index _i stands for the connection
* type (one of 16).
*/
#define TCM_REG_N_SM_CTX_LD_0 0x50050
#define TCM_REG_N_SM_CTX_LD_1 0x50054
#define TCM_REG_N_SM_CTX_LD_2 0x50058
#define TCM_REG_N_SM_CTX_LD_3 0x5005c
#define TCM_REG_N_SM_CTX_LD_4 0x50060
#define TCM_REG_N_SM_CTX_LD_5 0x50064
/*
* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define TCM_REG_PBF_IFEN 0x50024
/*
* [RC 1] Message length mismatch (relative to last indication) at the In#
* interface.
*/
#define TCM_REG_PBF_LENGTH_MIS 0x5016c
/*
* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_PBF_WEIGHT 0x500b4
#define TCM_REG_PHYS_QNUM0_0 0x500e0
#define TCM_REG_PHYS_QNUM0_1 0x500e4
#define TCM_REG_PHYS_QNUM1_0 0x500e8
#define TCM_REG_PHYS_QNUM1_1 0x500ec
#define TCM_REG_PHYS_QNUM2_0 0x500f0
#define TCM_REG_PHYS_QNUM2_1 0x500f4
#define TCM_REG_PHYS_QNUM3_0 0x500f8
#define TCM_REG_PHYS_QNUM3_1 0x500fc
/*
* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define TCM_REG_PRS_IFEN 0x50020
/*
* [RC 1] Message length mismatch (relative to last indication) at the In#
* interface.
*/
#define TCM_REG_PRS_LENGTH_MIS 0x50168
/*
* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_PRS_WEIGHT 0x500b0
/* [RW 8] The Event ID for Timers formatting in case of stop done. */
#define TCM_REG_STOP_EVNT_ID 0x500a8
/*
* [RC 1] Message length mismatch (relative to last indication) at the STOR
* interface.
*/
#define TCM_REG_STORM_LENGTH_MIS 0x50160
/*
* [RW 1] STORM - CM Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define TCM_REG_STORM_TCM_IFEN 0x50010
/*
* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_STORM_WEIGHT 0x500ac
/*
* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define TCM_REG_TCM_CFC_IFEN 0x50040
/* [RW 11] Interrupt mask register #0 read/write */
#define TCM_REG_TCM_INT_MASK 0x501dc
/* [R 11] Interrupt register #0 read */
#define TCM_REG_TCM_INT_STS 0x501d0
/* [R 27] Parity register #0 read */
#define TCM_REG_TCM_PRTY_STS 0x501e0
/*
* [RW 3] The size of AG context region 0 in REG-pairs. Designates the M
* REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
* Is used to determine the number of the AG context REG-pairs written back;
* when the input message Reg1WbFlg isn't set.
*/
#define TCM_REG_TCM_REG0_SZ 0x500d8
/*
* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input i
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define TCM_REG_TCM_STORM0_IFEN 0x50004
/*
* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input i
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define TCM_REG_TCM_STORM1_IFEN 0x50008
/*
* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input i
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define TCM_REG_TCM_TQM_IFEN 0x5000c
/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
#define TCM_REG_TCM_TQM_USE_Q 0x500d4
/* [RW 28] The CM header for Timers expiration command. */
#define TCM_REG_TM_TCM_HDR 0x50098
/*
* [RW 1] Timers - CM Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define TCM_REG_TM_TCM_IFEN 0x5001c
/*
* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_TM_WEIGHT 0x500d0
/*
* [RW 6] QM output initial credit. Max credit available - 32.Write write
* the initial credit value; read returns the current value of the credit
* counter. Must be initialized to 32 at start-up.
*/
#define TCM_REG_TQM_INIT_CRD 0x5021c
/*
* [RW 3] The weight of the QM (primary) input in the WRR mechanism.
* stands for weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_TQM_P_WEIGHT 0x500c8
/*
* [RW 3] The weight of the QM (secondary) input in the WRR mechanism.
* stands for weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_TQM_S_WEIGHT 0x500cc
/* [RW 28] The CM header value for QM request (primary). */
#define TCM_REG_TQM_TCM_HDR_P 0x50090
/* [RW 28] The CM header value for QM request (secondary). */
#define TCM_REG_TQM_TCM_HDR_S 0x50094
/*
* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define TCM_REG_TQM_TCM_IFEN 0x50014
/*
* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define TCM_REG_TSDM_IFEN 0x50018
/*
* [RC 1] Message length mismatch (relative to last indication) at the SD
* interface.
*/
#define TCM_REG_TSDM_LENGTH_MIS 0x50164
/*
* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_TSDM_WEIGHT 0x500c4
/*
* [RW 1] Input usem Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define TCM_REG_USEM_IFEN 0x50028
/*
* [RC 1] Message length mismatch (relative to last indication) at the In#
* interface.
*/
#define TCM_REG_USEM_LENGTH_MIS 0x50170
/*
* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define TCM_REG_USEM_WEIGHT 0x500b8
/*
* [RW 21] Indirect access to the descriptor table of the XX protectio
* mechanism. The fields are: [5:0] - length of the message; 15:6] - message
* pointer; 20:16] - next pointer.
*/
#define TCM_REG_XX_DESCR_TABLE 0x50280
#define TCM_REG_XX_DESCR_TABLE_SIZE 32
/* [R 6] Use to read the value of XX protection Free counter. */
#define TCM_REG_XX_FREE 0x50178
/*
* [RW 6] Initial value for the credit counter; responsible for fulfillin
* of the Input Stage XX protection buffer by the XX protection pending
* messages. Max credit available - 127.Write writes the initial credit
* value; read returns the current value of the credit counter. Must be
* initialized to 19 at start-up.
*/
#define TCM_REG_XX_INIT_CRD 0x50220
/*
* [RW 6] Maximum link list size (messages locked) per connection in the X
* protection.
*/
#define TCM_REG_XX_MAX_LL_SZ 0x50044
/*
* [RW 6] The maximum number of pending messages; which may be stored in X
* protection. ~tcm_registers_xx_free.xx_free is read on read.
*/
#define TCM_REG_XX_MSG_NUM 0x50224
/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
#define TCM_REG_XX_OVFL_EVNT_ID 0x50048
/*
* [RW 16] Indirect access to the XX table of the XX protection mechanism
* The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
* header pointer.
*/
#define TCM_REG_XX_TABLE 0x50240
/* [RW 4] Load value for for cfc ac credit cnt. */
#define TM_REG_CFC_AC_CRDCNT_VAL 0x164208
/* [RW 4] Load value for cfc cld credit cnt. */
#define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210
/* [RW 8] Client0 context region. */
#define TM_REG_CL0_CONT_REGION 0x164030
/* [RW 8] Client1 context region. */
#define TM_REG_CL1_CONT_REGION 0x164034
/* [RW 8] Client2 context region. */
#define TM_REG_CL2_CONT_REGION 0x164038
/* [RW 2] Client in High priority client number. */
#define TM_REG_CLIN_PRIOR0_CLIENT 0x164024
/* [RW 4] Load value for clout0 cred cnt. */
#define TM_REG_CLOUT_CRDCNT0_VAL 0x164220
/* [RW 4] Load value for clout1 cred cnt. */
#define TM_REG_CLOUT_CRDCNT1_VAL 0x164228
/* [RW 4] Load value for clout2 cred cnt. */
#define TM_REG_CLOUT_CRDCNT2_VAL 0x164230
/* [RW 1] Enable client0 input. */
#define TM_REG_EN_CL0_INPUT 0x164008
/* [RW 1] Enable client1 input. */
#define TM_REG_EN_CL1_INPUT 0x16400c
/* [RW 1] Enable client2 input. */
#define TM_REG_EN_CL2_INPUT 0x164010
#define TM_REG_EN_LINEAR0_TIMER 0x164014
/* [RW 1] Enable real time counter. */
#define TM_REG_EN_REAL_TIME_CNT 0x1640d8
/* [RW 1] Enable for Timers state machines. */
#define TM_REG_EN_TIMERS 0x164000
/*
* [RW 4] Load value for expiration credit cnt. CFC max number o
* outstanding load requests for timers (expiration) context loading.
*/
#define TM_REG_EXP_CRDCNT_VAL 0x164238
/* [RW 32] Linear0 logic address. */
#define TM_REG_LIN0_LOGIC_ADDR 0x164240
/* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
#define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
/* [WB 64] Linear0 phy address. */
#define TM_REG_LIN0_PHY_ADDR 0x164270
/* [RW 1] Linear0 physical address valid. */
#define TM_REG_LIN0_PHY_ADDR_VALID 0x164248
#define TM_REG_LIN0_SCAN_ON 0x1640d0
/* [RW 24] Linear0 array scan timeout. */
#define TM_REG_LIN0_SCAN_TIME 0x16403c
/* [RW 32] Linear1 logic address. */
#define TM_REG_LIN1_LOGIC_ADDR 0x164250
/* [WB 64] Linear1 phy address. */
#define TM_REG_LIN1_PHY_ADDR 0x164280
/* [RW 1] Linear1 physical address valid. */
#define TM_REG_LIN1_PHY_ADDR_VALID 0x164258
/* [RW 6] Linear timer set_clear fifo threshold. */
#define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070
/* [RW 2] Load value for pci arbiter credit cnt. */
#define TM_REG_PCIARB_CRDCNT_VAL 0x164260
/* [RW 20] The amount of hardware cycles for each timer tick. */
#define TM_REG_TIMER_TICK_SIZE 0x16401c
/* [RW 8] Timers Context region. */
#define TM_REG_TM_CONTEXT_REGION 0x164044
/* [RW 1] Interrupt mask register #0 read/write */
#define TM_REG_TM_INT_MASK 0x1640fc
/* [R 1] Interrupt register #0 read */
#define TM_REG_TM_INT_STS 0x1640f0
/* [RW 8] The event id for aggregated interrupt 0 */
#define TSDM_REG_AGG_INT_EVENT_0 0x42038
#define TSDM_REG_AGG_INT_EVENT_1 0x4203c
#define TSDM_REG_AGG_INT_EVENT_2 0x42040
#define TSDM_REG_AGG_INT_EVENT_3 0x42044
#define TSDM_REG_AGG_INT_EVENT_4 0x42048
/* [RW 1] The T bit for aggregated interrupt 0 */
#define TSDM_REG_AGG_INT_T_0 0x420b8
#define TSDM_REG_AGG_INT_T_1 0x420bc
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define TSDM_REG_CFC_RSP_START_ADDR 0x42008
/* [RW 16] The maximum value of the competion counter #0 */
#define TSDM_REG_CMP_COUNTER_MAX0 0x4201c
/* [RW 16] The maximum value of the competion counter #1 */
#define TSDM_REG_CMP_COUNTER_MAX1 0x42020
/* [RW 16] The maximum value of the competion counter #2 */
#define TSDM_REG_CMP_COUNTER_MAX2 0x42024
/* [RW 16] The maximum value of the competion counter #3 */
#define TSDM_REG_CMP_COUNTER_MAX3 0x42028
/*
* [RW 13] The start address in the internal RAM for the completio
* counters.
*/
#define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c
#define TSDM_REG_ENABLE_IN1 0x42238
#define TSDM_REG_ENABLE_IN2 0x4223c
#define TSDM_REG_ENABLE_OUT1 0x42240
#define TSDM_REG_ENABLE_OUT2 0x42244
/*
* [RW 4] The initial number of messages that can be sent to the pxp contro
* interface without receiving any ACK.
*/
#define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc
/* [ST 32] The number of ACK after placement messages received */
#define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c
/* [ST 32] The number of packet end messages received from the parser */
#define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274
/* [ST 32] The number of requests received from the pxp async if */
#define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278
/* [ST 32] The number of commands received in queue 0 */
#define TSDM_REG_NUM_OF_Q0_CMD 0x42248
/* [ST 32] The number of commands received in queue 10 */
#define TSDM_REG_NUM_OF_Q10_CMD 0x4226c
/* [ST 32] The number of commands received in queue 11 */
#define TSDM_REG_NUM_OF_Q11_CMD 0x42270
/* [ST 32] The number of commands received in queue 1 */
#define TSDM_REG_NUM_OF_Q1_CMD 0x4224c
/* [ST 32] The number of commands received in queue 3 */
#define TSDM_REG_NUM_OF_Q3_CMD 0x42250
/* [ST 32] The number of commands received in queue 4 */
#define TSDM_REG_NUM_OF_Q4_CMD 0x42254
/* [ST 32] The number of commands received in queue 5 */
#define TSDM_REG_NUM_OF_Q5_CMD 0x42258
/* [ST 32] The number of commands received in queue 6 */
#define TSDM_REG_NUM_OF_Q6_CMD 0x4225c
/* [ST 32] The number of commands received in queue 7 */
#define TSDM_REG_NUM_OF_Q7_CMD 0x42260
/* [ST 32] The number of commands received in queue 8 */
#define TSDM_REG_NUM_OF_Q8_CMD 0x42264
/* [ST 32] The number of commands received in queue 9 */
#define TSDM_REG_NUM_OF_Q9_CMD 0x42268
/* [RW 13] The start address in the internal RAM for the packet end message */
#define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014
/* [RW 13] The start address in the internal RAM for queue counters */
#define TSDM_REG_Q_COUNTER_START_ADDR 0x42010
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
#define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548
/* [R 1] parser fifo empty in sdm_sync block */
#define TSDM_REG_SYNC_PARSER_EMPTY 0x42550
/* [R 1] parser serial fifo empty in sdm_sync block */
#define TSDM_REG_SYNC_SYNC_EMPTY 0x42558
/*
* [RW 32] Tick for timer counter. Applicable only whe
* ~tsdm_registers_timer_tick_enable.timer_tick_enable =1
*/
#define TSDM_REG_TIMER_TICK 0x42000
/* [RW 32] Interrupt mask register #0 read/write */
#define TSDM_REG_TSDM_INT_MASK_0 0x4229c
#define TSDM_REG_TSDM_INT_MASK_1 0x422ac
/* [R 32] Interrupt register #0 read */
#define TSDM_REG_TSDM_INT_STS_0 0x42290
#define TSDM_REG_TSDM_INT_STS_1 0x422a0
/* [RW 11] Parity mask register #0 read/write */
#define TSDM_REG_TSDM_PRTY_MASK 0x422bc
/* [R 11] Parity register #0 read */
#define TSDM_REG_TSDM_PRTY_STS 0x422b0
/* [RW 5] The number of time_slots in the arbitration cycle */
#define TSEM_REG_ARB_CYCLE_SIZE 0x180034
/*
* [RW 3] The source that is associated with arbitration element 0. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2
*/
#define TSEM_REG_ARB_ELEMENT0 0x180020
/*
* [RW 3] The source that is associated with arbitration element 1. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~tsem_registers_arb_element0.arb_element0
*/
#define TSEM_REG_ARB_ELEMENT1 0x180024
/*
* [RW 3] The source that is associated with arbitration element 2. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~tsem_registers_arb_element0.arb_element0
* and ~tsem_registers_arb_element1.arb_element1
*/
#define TSEM_REG_ARB_ELEMENT2 0x180028
/*
* [RW 3] The source that is associated with arbitration element 3. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
* not be equal to register ~tsem_registers_arb_element0.arb_element0 and
* ~tsem_registers_arb_element1.arb_element1 and
* ~tsem_registers_arb_element2.arb_element2
*/
#define TSEM_REG_ARB_ELEMENT3 0x18002c
/*
* [RW 3] The source that is associated with arbitration element 4. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~tsem_registers_arb_element0.arb_element0
* and ~tsem_registers_arb_element1.arb_element1 and
* ~tsem_registers_arb_element2.arb_element2 and
* ~tsem_registers_arb_element3.arb_element3
*/
#define TSEM_REG_ARB_ELEMENT4 0x180030
#define TSEM_REG_ENABLE_IN 0x1800a4
#define TSEM_REG_ENABLE_OUT 0x1800a8
/*
* [RW 32] This address space contains all registers and memories that ar
* placed in SEM_FAST block. The SEM_FAST registers are described in
* appendix B. In order to access the sem_fast registers the base address
* ~fast_memory.fast_memory should be added to eachsem_fast register offset.
*/
#define TSEM_REG_FAST_MEMORY 0x1a0000
/*
* [RW 1] Disables input messages from FIC0 May be updated during run_tim
* by the microcode
*/
#define TSEM_REG_FIC0_DISABLE 0x180224
/*
* [RW 1] Disables input messages from FIC1 May be updated during run_tim
* by the microcode
*/
#define TSEM_REG_FIC1_DISABLE 0x180234
/*
* [RW 15] Interrupt table Read and write access to it is not possible i
* the middle of the work
*/
#define TSEM_REG_INT_TABLE 0x180400
/*
* [ST 24] Statistics register. The number of messages that entered throug
* FIC0
*/
#define TSEM_REG_MSG_NUM_FIC0 0x180000
/*
* [ST 24] Statistics register. The number of messages that entered throug
* FIC1
*/
#define TSEM_REG_MSG_NUM_FIC1 0x180004
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC0
*/
#define TSEM_REG_MSG_NUM_FOC0 0x180008
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC1
*/
#define TSEM_REG_MSG_NUM_FOC1 0x18000c
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC2
*/
#define TSEM_REG_MSG_NUM_FOC2 0x180010
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC3
*/
#define TSEM_REG_MSG_NUM_FOC3 0x180014
/*
* [RW 1] Disables input messages from the passive buffer May be update
* during run_time by the microcode
*/
#define TSEM_REG_PAS_DISABLE 0x18024c
/* [WB 128] Debug only. Passive buffer memory */
#define TSEM_REG_PASSIVE_BUFFER 0x181000
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
#define TSEM_REG_PRAM 0x1c0000
/* [R 8] Valid sleeping threads indication have bit per thread */
#define TSEM_REG_SLEEP_THREADS_VALID 0x18026c
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
#define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
/* [RW 8] List of free threads . There is a bit per thread. */
#define TSEM_REG_THREADS_LIST 0x1802e4
/* [RW 3] The arbitration scheme of time_slot 0 */
#define TSEM_REG_TS_0_AS 0x180038
/* [RW 3] The arbitration scheme of time_slot 10 */
#define TSEM_REG_TS_10_AS 0x180060
/* [RW 3] The arbitration scheme of time_slot 11 */
#define TSEM_REG_TS_11_AS 0x180064
/* [RW 3] The arbitration scheme of time_slot 12 */
#define TSEM_REG_TS_12_AS 0x180068
/* [RW 3] The arbitration scheme of time_slot 13 */
#define TSEM_REG_TS_13_AS 0x18006c
/* [RW 3] The arbitration scheme of time_slot 14 */
#define TSEM_REG_TS_14_AS 0x180070
/* [RW 3] The arbitration scheme of time_slot 15 */
#define TSEM_REG_TS_15_AS 0x180074
/* [RW 3] The arbitration scheme of time_slot 16 */
#define TSEM_REG_TS_16_AS 0x180078
/* [RW 3] The arbitration scheme of time_slot 17 */
#define TSEM_REG_TS_17_AS 0x18007c
/* [RW 3] The arbitration scheme of time_slot 18 */
#define TSEM_REG_TS_18_AS 0x180080
/* [RW 3] The arbitration scheme of time_slot 1 */
#define TSEM_REG_TS_1_AS 0x18003c
/* [RW 3] The arbitration scheme of time_slot 2 */
#define TSEM_REG_TS_2_AS 0x180040
/* [RW 3] The arbitration scheme of time_slot 3 */
#define TSEM_REG_TS_3_AS 0x180044
/* [RW 3] The arbitration scheme of time_slot 4 */
#define TSEM_REG_TS_4_AS 0x180048
/* [RW 3] The arbitration scheme of time_slot 5 */
#define TSEM_REG_TS_5_AS 0x18004c
/* [RW 3] The arbitration scheme of time_slot 6 */
#define TSEM_REG_TS_6_AS 0x180050
/* [RW 3] The arbitration scheme of time_slot 7 */
#define TSEM_REG_TS_7_AS 0x180054
/* [RW 3] The arbitration scheme of time_slot 8 */
#define TSEM_REG_TS_8_AS 0x180058
/* [RW 3] The arbitration scheme of time_slot 9 */
#define TSEM_REG_TS_9_AS 0x18005c
/* [RW 32] Interrupt mask register #0 read/write */
#define TSEM_REG_TSEM_INT_MASK_0 0x180100
#define TSEM_REG_TSEM_INT_MASK_1 0x180110
/* [R 32] Interrupt register #0 read */
#define TSEM_REG_TSEM_INT_STS_0 0x1800f4
#define TSEM_REG_TSEM_INT_STS_1 0x180104
/* [RW 32] Parity mask register #0 read/write */
#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
/* [R 32] Parity register #0 read */
#define TSEM_REG_TSEM_PRTY_STS_0 0x180114
#define TSEM_REG_TSEM_PRTY_STS_1 0x180124
/* [R 5] Used to read the XX protection CAM occupancy counter. */
#define UCM_REG_CAM_OCCUP 0xe0170
/*
* [RW 1] CDU AG read Interface enable. If 0 - the request input i
* disregarded; valid output is deasserted; all other signals are treated as
* usual; if 1 - normal activity.
*/
#define UCM_REG_CDU_AG_RD_IFEN 0xe0038
/*
* [RW 1] CDU AG write Interface enable. If 0 - the request and valid inpu
* are disregarded; all other signals are treated as usual; if 1 - normal
* activity.
*/
#define UCM_REG_CDU_AG_WR_IFEN 0xe0034
/*
* [RW 1] CDU STORM read Interface enable. If 0 - the request input i
* disregarded; valid output is deasserted; all other signals are treated as
* usual; if 1 - normal activity.
*/
#define UCM_REG_CDU_SM_RD_IFEN 0xe0040
/*
* [RW 1] CDU STORM write Interface enable. If 0 - the request and vali
* input is disregarded; all other signals are treated as usual; if 1 -
* normal activity.
*/
#define UCM_REG_CDU_SM_WR_IFEN 0xe003c
/*
* [RW 4] CFC output initial credit. Max credit available - 15.Write write
* the initial credit value; read returns the current value of the credit
* counter. Must be initialized to 1 at start-up.
*/
#define UCM_REG_CFC_INIT_CRD 0xe0204
/*
* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_CP_WEIGHT 0xe00c4
/*
* [RW 1] Input csem Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define UCM_REG_CSEM_IFEN 0xe0028
/*
* [RC 1] Set when the message length mismatch (relative to last indication
* at the csem interface is detected.
*/
#define UCM_REG_CSEM_LENGTH_MIS 0xe0160
/*
* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_CSEM_WEIGHT 0xe00b8
/*
* [RW 1] Input dorq Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define UCM_REG_DORQ_IFEN 0xe0030
/*
* [RC 1] Set when the message length mismatch (relative to last indication
* at the dorq interface is detected.
*/
#define UCM_REG_DORQ_LENGTH_MIS 0xe0168
/*
* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_DORQ_WEIGHT 0xe00c0
/* [RW 8] The Event ID in case ErrorFlg input message bit is set. */
#define UCM_REG_ERR_EVNT_ID 0xe00a4
/* [RW 28] The CM erroneous header for QM and Timers formatting. */
#define UCM_REG_ERR_UCM_HDR 0xe00a0
/* [RW 8] The Event ID for Timers expiration. */
#define UCM_REG_EXPR_EVNT_ID 0xe00a8
/*
* [RW 8] FIC0 output initial credit. Max credit available - 255.Writ
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 64 at start-up.
*/
#define UCM_REG_FIC0_INIT_CRD 0xe020c
/*
* [RW 8] FIC1 output initial credit. Max credit available - 255.Writ
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 64 at start-up.
*/
#define UCM_REG_FIC1_INIT_CRD 0xe0210
/*
* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin;
* - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr;
* ~ucm_registers_gr_ld0_pr.gr_ld0_pr and
* ~ucm_registers_gr_ld1_pr.gr_ld1_pr.
*/
#define UCM_REG_GR_ARB_TYPE 0xe0144
/*
* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; th
* highest priority is 3. It is supposed that the Store channel group is
* compliment to the others.
*/
#define UCM_REG_GR_LD0_PR 0xe014c
/*
* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; th
* highest priority is 3. It is supposed that the Store channel group is
* compliment to the others.
*/
#define UCM_REG_GR_LD1_PR 0xe0150
/* [RW 2] The queue index for invalidate counter flag decision. */
#define UCM_REG_INV_CFLG_Q 0xe00e4
/*
* [RW 5] The number of double REG-pairs; loaded from the STORM context an
* sent to STORM; for a specific connection type. the double REG-pairs are
* used in order to align to STORM context row size of 128 bits. The offset
* of these data in the STORM context is always 0. Index _i stands for the
* connection type (one of 16).
*/
#define UCM_REG_N_SM_CTX_LD_0 0xe0054
#define UCM_REG_N_SM_CTX_LD_1 0xe0058
#define UCM_REG_N_SM_CTX_LD_2 0xe005c
#define UCM_REG_N_SM_CTX_LD_3 0xe0060
#define UCM_REG_N_SM_CTX_LD_4 0xe0064
#define UCM_REG_N_SM_CTX_LD_5 0xe0068
#define UCM_REG_PHYS_QNUM0_0 0xe0110
#define UCM_REG_PHYS_QNUM0_1 0xe0114
#define UCM_REG_PHYS_QNUM1_0 0xe0118
#define UCM_REG_PHYS_QNUM1_1 0xe011c
#define UCM_REG_PHYS_QNUM2_0 0xe0120
#define UCM_REG_PHYS_QNUM2_1 0xe0124
#define UCM_REG_PHYS_QNUM3_0 0xe0128
#define UCM_REG_PHYS_QNUM3_1 0xe012c
/* [RW 8] The Event ID for Timers formatting in case of stop done. */
#define UCM_REG_STOP_EVNT_ID 0xe00ac
/*
* [RC 1] Set when the message length mismatch (relative to last indication
* at the STORM interface is detected.
*/
#define UCM_REG_STORM_LENGTH_MIS 0xe0154
/*
* [RW 1] STORM - CM Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define UCM_REG_STORM_UCM_IFEN 0xe0010
/*
* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_STORM_WEIGHT 0xe00b0
/*
* [RW 4] Timers output initial credit. Max credit available - 15.Writ
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 4 at start-up.
*/
#define UCM_REG_TM_INIT_CRD 0xe021c
/* [RW 28] The CM header for Timers expiration command. */
#define UCM_REG_TM_UCM_HDR 0xe009c
/*
* [RW 1] Timers - CM Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define UCM_REG_TM_UCM_IFEN 0xe001c
/*
* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_TM_WEIGHT 0xe00d4
/*
* [RW 1] Input tsem Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define UCM_REG_TSEM_IFEN 0xe0024
/*
* [RC 1] Set when the message length mismatch (relative to last indication
* at the tsem interface is detected.
*/
#define UCM_REG_TSEM_LENGTH_MIS 0xe015c
/*
* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_TSEM_WEIGHT 0xe00b4
/*
* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define UCM_REG_UCM_CFC_IFEN 0xe0044
/* [RW 11] Interrupt mask register #0 read/write */
#define UCM_REG_UCM_INT_MASK 0xe01d4
/* [R 11] Interrupt register #0 read */
#define UCM_REG_UCM_INT_STS 0xe01c8
/* [R 27] Parity register #0 read */
#define UCM_REG_UCM_PRTY_STS 0xe01d8
/*
* [RW 2] The size of AG context region 0 in REG-pairs. Designates the M
* REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
* Is used to determine the number of the AG context REG-pairs written back;
* when the Reg1WbFlg isn't set.
*/
#define UCM_REG_UCM_REG0_SZ 0xe00dc
/*
* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input i
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define UCM_REG_UCM_STORM0_IFEN 0xe0004
/*
* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input i
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define UCM_REG_UCM_STORM1_IFEN 0xe0008
/*
* [RW 1] CM - Timers Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define UCM_REG_UCM_TM_IFEN 0xe0020
/*
* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input i
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define UCM_REG_UCM_UQM_IFEN 0xe000c
/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
#define UCM_REG_UCM_UQM_USE_Q 0xe00d8
/*
* [RW 6] QM output initial credit. Max credit available - 32.Write write
* the initial credit value; read returns the current value of the credit
* counter. Must be initialized to 32 at start-up.
*/
#define UCM_REG_UQM_INIT_CRD 0xe0220
/*
* [RW 3] The weight of the QM (primary) input in the WRR mechanism.
* stands for weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_UQM_P_WEIGHT 0xe00cc
/*
* [RW 3] The weight of the QM (secondary) input in the WRR mechanism.
* stands for weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_UQM_S_WEIGHT 0xe00d0
/* [RW 28] The CM header value for QM request (primary). */
#define UCM_REG_UQM_UCM_HDR_P 0xe0094
/* [RW 28] The CM header value for QM request (secondary). */
#define UCM_REG_UQM_UCM_HDR_S 0xe0098
/*
* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define UCM_REG_UQM_UCM_IFEN 0xe0014
/*
* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define UCM_REG_USDM_IFEN 0xe0018
/*
* [RC 1] Set when the message length mismatch (relative to last indication
* at the SDM interface is detected.
*/
#define UCM_REG_USDM_LENGTH_MIS 0xe0158
/*
* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_USDM_WEIGHT 0xe00c8
/*
* [RW 1] Input xsem Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define UCM_REG_XSEM_IFEN 0xe002c
/*
* [RC 1] Set when the message length mismatch (relative to last indication
* at the xsem interface isdetected.
*/
#define UCM_REG_XSEM_LENGTH_MIS 0xe0164
/*
* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define UCM_REG_XSEM_WEIGHT 0xe00bc
/*
* [RW 20] Indirect access to the descriptor table of the XX protectio
* mechanism. The fields are:[5:0] - message length; 14:6] - message
* pointer; 19:15] - next pointer.
*/
#define UCM_REG_XX_DESCR_TABLE 0xe0280
#define UCM_REG_XX_DESCR_TABLE_SIZE 32
/* [R 6] Use to read the XX protection Free counter. */
#define UCM_REG_XX_FREE 0xe016c
/*
* [RW 6] Initial value for the credit counter; responsible for fulfillin
* of the Input Stage XX protection buffer by the XX protection pending
* messages. Write writes the initial credit value; read returns the current
* value of the credit counter. Must be initialized to 12 at start-up.
*/
#define UCM_REG_XX_INIT_CRD 0xe0224
/*
* [RW 6] The maximum number of pending messages; which may be stored in X
* protection. ~ucm_registers_xx_free.xx_free read on read.
*/
#define UCM_REG_XX_MSG_NUM 0xe0228
/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
#define UCM_REG_XX_OVFL_EVNT_ID 0xe004c
/*
* [RW 16] Indirect access to the XX table of the XX protection mechanism
* The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
* header pointer.
*/
#define UCM_REG_XX_TABLE 0xe0300
/* [RW 8] The event id for aggregated interrupt 0 */
#define USDM_REG_AGG_INT_EVENT_0 0xc4038
#define USDM_REG_AGG_INT_EVENT_1 0xc403c
#define USDM_REG_AGG_INT_EVENT_2 0xc4040
#define USDM_REG_AGG_INT_EVENT_4 0xc4048
#define USDM_REG_AGG_INT_EVENT_5 0xc404c
#define USDM_REG_AGG_INT_EVENT_6 0xc4050
/*
* [RW 1] For each aggregated interrupt index whether the mode is normal (0
* or auto-mask-mode (1)
*/
#define USDM_REG_AGG_INT_MODE_0 0xc41b8
#define USDM_REG_AGG_INT_MODE_1 0xc41bc
#define USDM_REG_AGG_INT_MODE_4 0xc41c8
#define USDM_REG_AGG_INT_MODE_5 0xc41cc
#define USDM_REG_AGG_INT_MODE_6 0xc41d0
/* [RW 1] The T bit for aggregated interrupt 5 */
#define USDM_REG_AGG_INT_T_5 0xc40cc
#define USDM_REG_AGG_INT_T_6 0xc40d0
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define USDM_REG_CFC_RSP_START_ADDR 0xc4008
/* [RW 16] The maximum value of the competion counter #0 */
#define USDM_REG_CMP_COUNTER_MAX0 0xc401c
/* [RW 16] The maximum value of the competion counter #1 */
#define USDM_REG_CMP_COUNTER_MAX1 0xc4020
/* [RW 16] The maximum value of the competion counter #2 */
#define USDM_REG_CMP_COUNTER_MAX2 0xc4024
/* [RW 16] The maximum value of the competion counter #3 */
#define USDM_REG_CMP_COUNTER_MAX3 0xc4028
/*
* [RW 13] The start address in the internal RAM for the completio
* counters.
*/
#define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c
#define USDM_REG_ENABLE_IN1 0xc4238
#define USDM_REG_ENABLE_IN2 0xc423c
#define USDM_REG_ENABLE_OUT1 0xc4240
#define USDM_REG_ENABLE_OUT2 0xc4244
/*
* [RW 4] The initial number of messages that can be sent to the pxp contro
* interface without receiving any ACK.
*/
#define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0
/* [ST 32] The number of ACK after placement messages received */
#define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280
/* [ST 32] The number of packet end messages received from the parser */
#define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278
/* [ST 32] The number of requests received from the pxp async if */
#define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c
/* [ST 32] The number of commands received in queue 0 */
#define USDM_REG_NUM_OF_Q0_CMD 0xc4248
/* [ST 32] The number of commands received in queue 10 */
#define USDM_REG_NUM_OF_Q10_CMD 0xc4270
/* [ST 32] The number of commands received in queue 11 */
#define USDM_REG_NUM_OF_Q11_CMD 0xc4274
/* [ST 32] The number of commands received in queue 1 */
#define USDM_REG_NUM_OF_Q1_CMD 0xc424c
/* [ST 32] The number of commands received in queue 2 */
#define USDM_REG_NUM_OF_Q2_CMD 0xc4250
/* [ST 32] The number of commands received in queue 3 */
#define USDM_REG_NUM_OF_Q3_CMD 0xc4254
/* [ST 32] The number of commands received in queue 4 */
#define USDM_REG_NUM_OF_Q4_CMD 0xc4258
/* [ST 32] The number of commands received in queue 5 */
#define USDM_REG_NUM_OF_Q5_CMD 0xc425c
/* [ST 32] The number of commands received in queue 6 */
#define USDM_REG_NUM_OF_Q6_CMD 0xc4260
/* [ST 32] The number of commands received in queue 7 */
#define USDM_REG_NUM_OF_Q7_CMD 0xc4264
/* [ST 32] The number of commands received in queue 8 */
#define USDM_REG_NUM_OF_Q8_CMD 0xc4268
/* [ST 32] The number of commands received in queue 9 */
#define USDM_REG_NUM_OF_Q9_CMD 0xc426c
/* [RW 13] The start address in the internal RAM for the packet end message */
#define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014
/* [RW 13] The start address in the internal RAM for queue counters */
#define USDM_REG_Q_COUNTER_START_ADDR 0xc4010
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
#define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550
/* [R 1] parser fifo empty in sdm_sync block */
#define USDM_REG_SYNC_PARSER_EMPTY 0xc4558
/* [R 1] parser serial fifo empty in sdm_sync block */
#define USDM_REG_SYNC_SYNC_EMPTY 0xc4560
/*
* [RW 32] Tick for timer counter. Applicable only whe
* ~usdm_registers_timer_tick_enable.timer_tick_enable =1
*/
#define USDM_REG_TIMER_TICK 0xc4000
/* [RW 32] Interrupt mask register #0 read/write */
#define USDM_REG_USDM_INT_MASK_0 0xc42a0
#define USDM_REG_USDM_INT_MASK_1 0xc42b0
/* [R 32] Interrupt register #0 read */
#define USDM_REG_USDM_INT_STS_0 0xc4294
#define USDM_REG_USDM_INT_STS_1 0xc42a4
/* [RW 11] Parity mask register #0 read/write */
#define USDM_REG_USDM_PRTY_MASK 0xc42c0
/* [R 11] Parity register #0 read */
#define USDM_REG_USDM_PRTY_STS 0xc42b4
/* [RW 5] The number of time_slots in the arbitration cycle */
#define USEM_REG_ARB_CYCLE_SIZE 0x300034
/*
* [RW 3] The source that is associated with arbitration element 0. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2
*/
#define USEM_REG_ARB_ELEMENT0 0x300020
/*
* [RW 3] The source that is associated with arbitration element 1. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~usem_registers_arb_element0.arb_element0
*/
#define USEM_REG_ARB_ELEMENT1 0x300024
/*
* [RW 3] The source that is associated with arbitration element 2. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~usem_registers_arb_element0.arb_element0
* and ~usem_registers_arb_element1.arb_element1
*/
#define USEM_REG_ARB_ELEMENT2 0x300028
/*
* [RW 3] The source that is associated with arbitration element 3. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
* not be equal to register ~usem_registers_arb_element0.arb_element0 and
* ~usem_registers_arb_element1.arb_element1 and
* ~usem_registers_arb_element2.arb_element2
*/
#define USEM_REG_ARB_ELEMENT3 0x30002c
/*
* [RW 3] The source that is associated with arbitration element 4. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~usem_registers_arb_element0.arb_element0
* and ~usem_registers_arb_element1.arb_element1 and
* ~usem_registers_arb_element2.arb_element2 and
* ~usem_registers_arb_element3.arb_element3
*/
#define USEM_REG_ARB_ELEMENT4 0x300030
#define USEM_REG_ENABLE_IN 0x3000a4
#define USEM_REG_ENABLE_OUT 0x3000a8
/*
* [RW 32] This address space contains all registers and memories that ar
* placed in SEM_FAST block. The SEM_FAST registers are described in
* appendix B. In order to access the sem_fast registers the base address
* ~fast_memory.fast_memory should be added to eachsem_fast register offset.
*/
#define USEM_REG_FAST_MEMORY 0x320000
/*
* [RW 1] Disables input messages from FIC0 May be updated during run_tim
* by the microcode
*/
#define USEM_REG_FIC0_DISABLE 0x300224
/*
* [RW 1] Disables input messages from FIC1 May be updated during run_tim
* by the microcode
*/
#define USEM_REG_FIC1_DISABLE 0x300234
/*
* [RW 15] Interrupt table Read and write access to it is not possible i
* the middle of the work
*/
#define USEM_REG_INT_TABLE 0x300400
/*
* [ST 24] Statistics register. The number of messages that entered throug
* FIC0
*/
#define USEM_REG_MSG_NUM_FIC0 0x300000
/*
* [ST 24] Statistics register. The number of messages that entered throug
* FIC1
*/
#define USEM_REG_MSG_NUM_FIC1 0x300004
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC0
*/
#define USEM_REG_MSG_NUM_FOC0 0x300008
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC1
*/
#define USEM_REG_MSG_NUM_FOC1 0x30000c
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC2
*/
#define USEM_REG_MSG_NUM_FOC2 0x300010
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC3
*/
#define USEM_REG_MSG_NUM_FOC3 0x300014
/*
* [RW 1] Disables input messages from the passive buffer May be update
* during run_time by the microcode
*/
#define USEM_REG_PAS_DISABLE 0x30024c
/* [WB 128] Debug only. Passive buffer memory */
#define USEM_REG_PASSIVE_BUFFER 0x302000
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
#define USEM_REG_PRAM 0x340000
/* [R 16] Valid sleeping threads indication have bit per thread */
#define USEM_REG_SLEEP_THREADS_VALID 0x30026c
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
#define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0
/* [RW 16] List of free threads . There is a bit per thread. */
#define USEM_REG_THREADS_LIST 0x3002e4
/* [RW 3] The arbitration scheme of time_slot 0 */
#define USEM_REG_TS_0_AS 0x300038
/* [RW 3] The arbitration scheme of time_slot 10 */
#define USEM_REG_TS_10_AS 0x300060
/* [RW 3] The arbitration scheme of time_slot 11 */
#define USEM_REG_TS_11_AS 0x300064
/* [RW 3] The arbitration scheme of time_slot 12 */
#define USEM_REG_TS_12_AS 0x300068
/* [RW 3] The arbitration scheme of time_slot 13 */
#define USEM_REG_TS_13_AS 0x30006c
/* [RW 3] The arbitration scheme of time_slot 14 */
#define USEM_REG_TS_14_AS 0x300070
/* [RW 3] The arbitration scheme of time_slot 15 */
#define USEM_REG_TS_15_AS 0x300074
/* [RW 3] The arbitration scheme of time_slot 16 */
#define USEM_REG_TS_16_AS 0x300078
/* [RW 3] The arbitration scheme of time_slot 17 */
#define USEM_REG_TS_17_AS 0x30007c
/* [RW 3] The arbitration scheme of time_slot 18 */
#define USEM_REG_TS_18_AS 0x300080
/* [RW 3] The arbitration scheme of time_slot 1 */
#define USEM_REG_TS_1_AS 0x30003c
/* [RW 3] The arbitration scheme of time_slot 2 */
#define USEM_REG_TS_2_AS 0x300040
/* [RW 3] The arbitration scheme of time_slot 3 */
#define USEM_REG_TS_3_AS 0x300044
/* [RW 3] The arbitration scheme of time_slot 4 */
#define USEM_REG_TS_4_AS 0x300048
/* [RW 3] The arbitration scheme of time_slot 5 */
#define USEM_REG_TS_5_AS 0x30004c
/* [RW 3] The arbitration scheme of time_slot 6 */
#define USEM_REG_TS_6_AS 0x300050
/* [RW 3] The arbitration scheme of time_slot 7 */
#define USEM_REG_TS_7_AS 0x300054
/* [RW 3] The arbitration scheme of time_slot 8 */
#define USEM_REG_TS_8_AS 0x300058
/* [RW 3] The arbitration scheme of time_slot 9 */
#define USEM_REG_TS_9_AS 0x30005c
/* [RW 32] Interrupt mask register #0 read/write */
#define USEM_REG_USEM_INT_MASK_0 0x300110
#define USEM_REG_USEM_INT_MASK_1 0x300120
/* [R 32] Interrupt register #0 read */
#define USEM_REG_USEM_INT_STS_0 0x300104
#define USEM_REG_USEM_INT_STS_1 0x300114
/* [RW 32] Parity mask register #0 read/write */
#define USEM_REG_USEM_PRTY_MASK_0 0x300130
#define USEM_REG_USEM_PRTY_MASK_1 0x300140
/* [R 32] Parity register #0 read */
#define USEM_REG_USEM_PRTY_STS_0 0x300124
#define USEM_REG_USEM_PRTY_STS_1 0x300134
/* [RW 2] The queue index for registration on Aux1 counter flag. */
#define XCM_REG_AUX1_Q 0x20134
/* [RW 2] Per each decision rule the queue index to register to. */
#define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0
/* [R 5] Used to read the XX protection CAM occupancy counter. */
#define XCM_REG_CAM_OCCUP 0x20244
/*
* [RW 1] CDU AG read Interface enable. If 0 - the request input i
* disregarded; valid output is deasserted; all other signals are treated as
* usual; if 1 - normal activity.
*/
#define XCM_REG_CDU_AG_RD_IFEN 0x20044
/*
* [RW 1] CDU AG write Interface enable. If 0 - the request and valid inpu
* are disregarded; all other signals are treated as usual; if 1 - normal
* activity.
*/
#define XCM_REG_CDU_AG_WR_IFEN 0x20040
/*
* [RW 1] CDU STORM read Interface enable. If 0 - the request input i
* disregarded; valid output is deasserted; all other signals are treated as
* usual; if 1 - normal activity.
*/
#define XCM_REG_CDU_SM_RD_IFEN 0x2004c
/*
* [RW 1] CDU STORM write Interface enable. If 0 - the request and vali
* input is disregarded; all other signals are treated as usual; if 1 -
* normal activity.
*/
#define XCM_REG_CDU_SM_WR_IFEN 0x20048
/*
* [RW 4] CFC output initial credit. Max credit available - 15.Write write
* the initial credit value; read returns the current value of the credit
* counter. Must be initialized to 1 at start-up.
*/
#define XCM_REG_CFC_INIT_CRD 0x20404
/*
* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_CP_WEIGHT 0x200dc
/*
* [RW 1] Input csem Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define XCM_REG_CSEM_IFEN 0x20028
/*
* [RC 1] Set at message length mismatch (relative to last indication) a
* the csem interface.
*/
#define XCM_REG_CSEM_LENGTH_MIS 0x20228
/*
* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_CSEM_WEIGHT 0x200c4
/*
* [RW 1] Input dorq Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define XCM_REG_DORQ_IFEN 0x20030
/*
* [RC 1] Set at message length mismatch (relative to last indication) a
* the dorq interface.
*/
#define XCM_REG_DORQ_LENGTH_MIS 0x20230
/*
* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_DORQ_WEIGHT 0x200cc
/* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */
#define XCM_REG_ERR_EVNT_ID 0x200b0
/* [RW 28] The CM erroneous header for QM and Timers formatting. */
#define XCM_REG_ERR_XCM_HDR 0x200ac
/* [RW 8] The Event ID for Timers expiration. */
#define XCM_REG_EXPR_EVNT_ID 0x200b4
/*
* [RW 8] FIC0 output initial credit. Max credit available - 255.Writ
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 64 at start-up.
*/
#define XCM_REG_FIC0_INIT_CRD 0x2040c
/*
* [RW 8] FIC1 output initial credit. Max credit available - 255.Writ
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 64 at start-up.
*/
#define XCM_REG_FIC1_INIT_CRD 0x20410
#define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118
#define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c
#define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108
#define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c
/*
* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin;
* - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr;
* ~xcm_registers_gr_ld0_pr.gr_ld0_pr and
* ~xcm_registers_gr_ld1_pr.gr_ld1_pr.
*/
#define XCM_REG_GR_ARB_TYPE 0x2020c
/*
* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; th
* highest priority is 3. It is supposed that the Channel group is the
* compliment of the other 3 groups.
*/
#define XCM_REG_GR_LD0_PR 0x20214
/*
* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; th
* highest priority is 3. It is supposed that the Channel group is the
* compliment of the other 3 groups.
*/
#define XCM_REG_GR_LD1_PR 0x20218
/*
* [RW 1] Input nig0 Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define XCM_REG_NIG0_IFEN 0x20038
/*
* [RC 1] Set at message length mismatch (relative to last indication) a
* the nig0 interface.
*/
#define XCM_REG_NIG0_LENGTH_MIS 0x20238
/*
* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_NIG0_WEIGHT 0x200d4
/*
* [RW 1] Input nig1 Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define XCM_REG_NIG1_IFEN 0x2003c
/*
* [RC 1] Set at message length mismatch (relative to last indication) a
* the nig1 interface.
*/
#define XCM_REG_NIG1_LENGTH_MIS 0x2023c
/*
* [RW 5] The number of double REG-pairs; loaded from the STORM context an
* sent to STORM; for a specific connection type. The double REG-pairs are
* used in order to align to STORM context row size of 128 bits. The offset
* of these data in the STORM context is always 0. Index _i stands for the
* connection type (one of 16).
*/
#define XCM_REG_N_SM_CTX_LD_0 0x20060
#define XCM_REG_N_SM_CTX_LD_1 0x20064
#define XCM_REG_N_SM_CTX_LD_2 0x20068
#define XCM_REG_N_SM_CTX_LD_3 0x2006c
#define XCM_REG_N_SM_CTX_LD_4 0x20070
#define XCM_REG_N_SM_CTX_LD_5 0x20074
/*
* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define XCM_REG_PBF_IFEN 0x20034
/*
* [RC 1] Set at message length mismatch (relative to last indication) a
* the pbf interface.
*/
#define XCM_REG_PBF_LENGTH_MIS 0x20234
/*
* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_PBF_WEIGHT 0x200d0
#define XCM_REG_PHYS_QNUM3_0 0x20100
#define XCM_REG_PHYS_QNUM3_1 0x20104
/* [RW 8] The Event ID for Timers formatting in case of stop done. */
#define XCM_REG_STOP_EVNT_ID 0x200b8
/*
* [RC 1] Set at message length mismatch (relative to last indication) a
* the STORM interface.
*/
#define XCM_REG_STORM_LENGTH_MIS 0x2021c
/*
* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_STORM_WEIGHT 0x200bc
/*
* [RW 1] STORM - CM Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define XCM_REG_STORM_XCM_IFEN 0x20010
/*
* [RW 4] Timers output initial credit. Max credit available - 15.Writ
* writes the initial credit value; read returns the current value of the
* credit counter. Must be initialized to 4 at start-up.
*/
#define XCM_REG_TM_INIT_CRD 0x2041c
/*
* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_TM_WEIGHT 0x200ec
/* [RW 28] The CM header for Timers expiration command. */
#define XCM_REG_TM_XCM_HDR 0x200a8
/*
* [RW 1] Timers - CM Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define XCM_REG_TM_XCM_IFEN 0x2001c
/*
* [RW 1] Input tsem Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define XCM_REG_TSEM_IFEN 0x20024
/*
* [RC 1] Set at message length mismatch (relative to last indication) a
* the tsem interface.
*/
#define XCM_REG_TSEM_LENGTH_MIS 0x20224
/*
* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_TSEM_WEIGHT 0x200c0
/* [RW 2] The queue index for registration on UNA greater NXT decision rule. */
#define XCM_REG_UNA_GT_NXT_Q 0x20120
/*
* [RW 1] Input usem Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define XCM_REG_USEM_IFEN 0x2002c
/*
* [RC 1] Message length mismatch (relative to last indication) at the use
* interface.
*/
#define XCM_REG_USEM_LENGTH_MIS 0x2022c
/*
* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_USEM_WEIGHT 0x200c8
#define XCM_REG_WU_DA_CNT_CMD00 0x201d4
#define XCM_REG_WU_DA_CNT_CMD01 0x201d8
#define XCM_REG_WU_DA_CNT_CMD10 0x201dc
#define XCM_REG_WU_DA_CNT_CMD11 0x201e0
#define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4
#define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8
#define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec
#define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc
#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0
/*
* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define XCM_REG_XCM_CFC_IFEN 0x20050
/* [RW 14] Interrupt mask register #0 read/write */
#define XCM_REG_XCM_INT_MASK 0x202b4
/* [R 14] Interrupt register #0 read */
#define XCM_REG_XCM_INT_STS 0x202a8
/* [R 30] Parity register #0 read */
#define XCM_REG_XCM_PRTY_STS 0x202b8
/*
* [RW 4] The size of AG context region 0 in REG-pairs. Designates the M
* REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
* Is used to determine the number of the AG context REG-pairs written back;
* when the Reg1WbFlg isn't set.
*/
#define XCM_REG_XCM_REG0_SZ 0x200f4
/*
* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input i
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define XCM_REG_XCM_STORM0_IFEN 0x20004
/*
* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input i
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define XCM_REG_XCM_STORM1_IFEN 0x20008
/*
* [RW 1] CM - Timers Interface enable. If 0 - the valid input i
* disregarded; acknowledge output is deasserted; all other signals are
* treated as usual; if 1 - normal activity.
*/
#define XCM_REG_XCM_TM_IFEN 0x20020
/*
* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input i
* disregarded; valid is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define XCM_REG_XCM_XQM_IFEN 0x2000c
/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
#define XCM_REG_XCM_XQM_USE_Q 0x200f0
/* [RW 4] The value by which CFC updates the activity counter at QM bypass. */
#define XCM_REG_XQM_BYP_ACT_UPD 0x200fc
/*
* [RW 6] QM output initial credit. Max credit available - 32.Write write
* the initial credit value; read returns the current value of the credit
* counter. Must be initialized to 32 at start-up.
*/
#define XCM_REG_XQM_INIT_CRD 0x20420
/*
* [RW 3] The weight of the QM (primary) input in the WRR mechanism.
* stands for weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_XQM_P_WEIGHT 0x200e4
/*
* [RW 3] The weight of the QM (secondary) input in the WRR mechanism.
* stands for weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_XQM_S_WEIGHT 0x200e8
/* [RW 28] The CM header value for QM request (primary). */
#define XCM_REG_XQM_XCM_HDR_P 0x200a0
/* [RW 28] The CM header value for QM request (secondary). */
#define XCM_REG_XQM_XCM_HDR_S 0x200a4
/*
* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define XCM_REG_XQM_XCM_IFEN 0x20014
/*
* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded
* acknowledge output is deasserted; all other signals are treated as usual;
* if 1 - normal activity.
*/
#define XCM_REG_XSDM_IFEN 0x20018
/*
* [RC 1] Set at message length mismatch (relative to last indication) a
* the SDM interface.
*/
#define XCM_REG_XSDM_LENGTH_MIS 0x20220
/*
* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands fo
* weight 8 (the most prioritised); 1 stands for weight 1(least
* prioritised); 2 stands for weight 2; tc.
*/
#define XCM_REG_XSDM_WEIGHT 0x200e0
/*
* [RW 17] Indirect access to the descriptor table of the XX protectio
* mechanism. The fields are: [5:0] - message length; 11:6] - message
* pointer; 16:12] - next pointer.
*/
#define XCM_REG_XX_DESCR_TABLE 0x20480
#define XCM_REG_XX_DESCR_TABLE_SIZE 32
/* [R 6] Used to read the XX protection Free counter. */
#define XCM_REG_XX_FREE 0x20240
/*
* [RW 6] Initial value for the credit counter; responsible for fulfillin
* of the Input Stage XX protection buffer by the XX protection pending
* messages. Max credit available - 3.Write writes the initial credit value;
* read returns the current value of the credit counter. Must be initialized
* to 2 at start-up.
*/
#define XCM_REG_XX_INIT_CRD 0x20424
/*
* [RW 6] The maximum number of pending messages; which may be stored in X
* protection. ~xcm_registers_xx_free.xx_free read on read.
*/
#define XCM_REG_XX_MSG_NUM 0x20428
/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
#define XCM_REG_XX_OVFL_EVNT_ID 0x20058
/*
* [RW 16] Indirect access to the XX table of the XX protection mechanism
* The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
* header pointer.
*/
#define XCM_REG_XX_TABLE 0x20500
/* [RW 8] The event id for aggregated interrupt 0 */
#define XSDM_REG_AGG_INT_EVENT_0 0x166038
#define XSDM_REG_AGG_INT_EVENT_1 0x16603c
#define XSDM_REG_AGG_INT_EVENT_10 0x166060
#define XSDM_REG_AGG_INT_EVENT_11 0x166064
#define XSDM_REG_AGG_INT_EVENT_12 0x166068
#define XSDM_REG_AGG_INT_EVENT_13 0x16606c
#define XSDM_REG_AGG_INT_EVENT_14 0x166070
#define XSDM_REG_AGG_INT_EVENT_2 0x166040
#define XSDM_REG_AGG_INT_EVENT_3 0x166044
#define XSDM_REG_AGG_INT_EVENT_4 0x166048
#define XSDM_REG_AGG_INT_EVENT_5 0x16604c
#define XSDM_REG_AGG_INT_EVENT_6 0x166050
#define XSDM_REG_AGG_INT_EVENT_7 0x166054
#define XSDM_REG_AGG_INT_EVENT_8 0x166058
#define XSDM_REG_AGG_INT_EVENT_9 0x16605c
/*
* [RW 1] For each aggregated interrupt index whether the mode is normal (0
* or auto-mask-mode (1)
*/
#define XSDM_REG_AGG_INT_MODE_0 0x1661b8
#define XSDM_REG_AGG_INT_MODE_1 0x1661bc
/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
#define XSDM_REG_CFC_RSP_START_ADDR 0x166008
/* [RW 16] The maximum value of the competion counter #0 */
#define XSDM_REG_CMP_COUNTER_MAX0 0x16601c
/* [RW 16] The maximum value of the competion counter #1 */
#define XSDM_REG_CMP_COUNTER_MAX1 0x166020
/* [RW 16] The maximum value of the competion counter #2 */
#define XSDM_REG_CMP_COUNTER_MAX2 0x166024
/* [RW 16] The maximum value of the competion counter #3 */
#define XSDM_REG_CMP_COUNTER_MAX3 0x166028
/*
* [RW 13] The start address in the internal RAM for the completio
* counters.
*/
#define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c
#define XSDM_REG_ENABLE_IN1 0x166238
#define XSDM_REG_ENABLE_IN2 0x16623c
#define XSDM_REG_ENABLE_OUT1 0x166240
#define XSDM_REG_ENABLE_OUT2 0x166244
/*
* [RW 4] The initial number of messages that can be sent to the pxp contro
* interface without receiving any ACK.
*/
#define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc
/* [ST 32] The number of ACK after placement messages received */
#define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c
/* [ST 32] The number of packet end messages received from the parser */
#define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274
/* [ST 32] The number of requests received from the pxp async if */
#define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278
/* [ST 32] The number of commands received in queue 0 */
#define XSDM_REG_NUM_OF_Q0_CMD 0x166248
/* [ST 32] The number of commands received in queue 10 */
#define XSDM_REG_NUM_OF_Q10_CMD 0x16626c
/* [ST 32] The number of commands received in queue 11 */
#define XSDM_REG_NUM_OF_Q11_CMD 0x166270
/* [ST 32] The number of commands received in queue 1 */
#define XSDM_REG_NUM_OF_Q1_CMD 0x16624c
/* [ST 32] The number of commands received in queue 3 */
#define XSDM_REG_NUM_OF_Q3_CMD 0x166250
/* [ST 32] The number of commands received in queue 4 */
#define XSDM_REG_NUM_OF_Q4_CMD 0x166254
/* [ST 32] The number of commands received in queue 5 */
#define XSDM_REG_NUM_OF_Q5_CMD 0x166258
/* [ST 32] The number of commands received in queue 6 */
#define XSDM_REG_NUM_OF_Q6_CMD 0x16625c
/* [ST 32] The number of commands received in queue 7 */
#define XSDM_REG_NUM_OF_Q7_CMD 0x166260
/* [ST 32] The number of commands received in queue 8 */
#define XSDM_REG_NUM_OF_Q8_CMD 0x166264
/* [ST 32] The number of commands received in queue 9 */
#define XSDM_REG_NUM_OF_Q9_CMD 0x166268
/* [RW 13] The start address in the internal RAM for queue counters */
#define XSDM_REG_Q_COUNTER_START_ADDR 0x166010
/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
#define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548
/* [R 1] parser fifo empty in sdm_sync block */
#define XSDM_REG_SYNC_PARSER_EMPTY 0x166550
/* [R 1] parser serial fifo empty in sdm_sync block */
#define XSDM_REG_SYNC_SYNC_EMPTY 0x166558
/*
* [RW 32] Tick for timer counter. Applicable only whe
* ~xsdm_registers_timer_tick_enable.timer_tick_enable =1
*/
#define XSDM_REG_TIMER_TICK 0x166000
/* [RW 32] Interrupt mask register #0 read/write */
#define XSDM_REG_XSDM_INT_MASK_0 0x16629c
#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
/* [R 32] Interrupt register #0 read */
#define XSDM_REG_XSDM_INT_STS_0 0x166290
#define XSDM_REG_XSDM_INT_STS_1 0x1662a0
/* [RW 11] Parity mask register #0 read/write */
#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
/* [R 11] Parity register #0 read */
#define XSDM_REG_XSDM_PRTY_STS 0x1662b0
/* [RW 5] The number of time_slots in the arbitration cycle */
#define XSEM_REG_ARB_CYCLE_SIZE 0x280034
/*
* [RW 3] The source that is associated with arbitration element 0. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2
*/
#define XSEM_REG_ARB_ELEMENT0 0x280020
/*
* [RW 3] The source that is associated with arbitration element 1. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~xsem_registers_arb_element0.arb_element0
*/
#define XSEM_REG_ARB_ELEMENT1 0x280024
/*
* [RW 3] The source that is associated with arbitration element 2. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~xsem_registers_arb_element0.arb_element0
* and ~xsem_registers_arb_element1.arb_element1
*/
#define XSEM_REG_ARB_ELEMENT2 0x280028
/*
* [RW 3] The source that is associated with arbitration element 3. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
* not be equal to register ~xsem_registers_arb_element0.arb_element0 and
* ~xsem_registers_arb_element1.arb_element1 and
* ~xsem_registers_arb_element2.arb_element2
*/
#define XSEM_REG_ARB_ELEMENT3 0x28002c
/*
* [RW 3] The source that is associated with arbitration element 4. Sourc
* decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
* sleeping thread with priority 1; 4- sleeping thread with priority 2.
* Could not be equal to register ~xsem_registers_arb_element0.arb_element0
* and ~xsem_registers_arb_element1.arb_element1 and
* ~xsem_registers_arb_element2.arb_element2 and
* ~xsem_registers_arb_element3.arb_element3
*/
#define XSEM_REG_ARB_ELEMENT4 0x280030
#define XSEM_REG_ENABLE_IN 0x2800a4
#define XSEM_REG_ENABLE_OUT 0x2800a8
/*
* [RW 32] This address space contains all registers and memories that ar
* placed in SEM_FAST block. The SEM_FAST registers are described in
* appendix B. In order to access the sem_fast registers the base address
* ~fast_memory.fast_memory should be added to eachsem_fast register offset.
*/
#define XSEM_REG_FAST_MEMORY 0x2a0000
/*
* [RW 1] Disables input messages from FIC0 May be updated during run_tim
* by the microcode
*/
#define XSEM_REG_FIC0_DISABLE 0x280224
/*
* [RW 1] Disables input messages from FIC1 May be updated during run_tim
* by the microcode
*/
#define XSEM_REG_FIC1_DISABLE 0x280234
/*
* [RW 15] Interrupt table Read and write access to it is not possible i
* the middle of the work
*/
#define XSEM_REG_INT_TABLE 0x280400
/*
* [ST 24] Statistics register. The number of messages that entered throug
* FIC0
*/
#define XSEM_REG_MSG_NUM_FIC0 0x280000
/*
* [ST 24] Statistics register. The number of messages that entered throug
* FIC1
*/
#define XSEM_REG_MSG_NUM_FIC1 0x280004
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC0
*/
#define XSEM_REG_MSG_NUM_FOC0 0x280008
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC1
*/
#define XSEM_REG_MSG_NUM_FOC1 0x28000c
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC2
*/
#define XSEM_REG_MSG_NUM_FOC2 0x280010
/*
* [ST 24] Statistics register. The number of messages that were sent t
* FOC3
*/
#define XSEM_REG_MSG_NUM_FOC3 0x280014
/*
* [RW 1] Disables input messages from the passive buffer May be update
* during run_time by the microcode
*/
#define XSEM_REG_PAS_DISABLE 0x28024c
/* [WB 128] Debug only. Passive buffer memory */
#define XSEM_REG_PASSIVE_BUFFER 0x282000
/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
#define XSEM_REG_PRAM 0x2c0000
/* [R 16] Valid sleeping threads indication have bit per thread */
#define XSEM_REG_SLEEP_THREADS_VALID 0x28026c
/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
#define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0
/* [RW 16] List of free threads . There is a bit per thread. */
#define XSEM_REG_THREADS_LIST 0x2802e4
/* [RW 3] The arbitration scheme of time_slot 0 */
#define XSEM_REG_TS_0_AS 0x280038
/* [RW 3] The arbitration scheme of time_slot 10 */
#define XSEM_REG_TS_10_AS 0x280060
/* [RW 3] The arbitration scheme of time_slot 11 */
#define XSEM_REG_TS_11_AS 0x280064
/* [RW 3] The arbitration scheme of time_slot 12 */
#define XSEM_REG_TS_12_AS 0x280068
/* [RW 3] The arbitration scheme of time_slot 13 */
#define XSEM_REG_TS_13_AS 0x28006c
/* [RW 3] The arbitration scheme of time_slot 14 */
#define XSEM_REG_TS_14_AS 0x280070
/* [RW 3] The arbitration scheme of time_slot 15 */
#define XSEM_REG_TS_15_AS 0x280074
/* [RW 3] The arbitration scheme of time_slot 16 */
#define XSEM_REG_TS_16_AS 0x280078
/* [RW 3] The arbitration scheme of time_slot 17 */
#define XSEM_REG_TS_17_AS 0x28007c
/* [RW 3] The arbitration scheme of time_slot 18 */
#define XSEM_REG_TS_18_AS 0x280080
/* [RW 3] The arbitration scheme of time_slot 1 */
#define XSEM_REG_TS_1_AS 0x28003c
/* [RW 3] The arbitration scheme of time_slot 2 */
#define XSEM_REG_TS_2_AS 0x280040
/* [RW 3] The arbitration scheme of time_slot 3 */
#define XSEM_REG_TS_3_AS 0x280044
/* [RW 3] The arbitration scheme of time_slot 4 */
#define XSEM_REG_TS_4_AS 0x280048
/* [RW 3] The arbitration scheme of time_slot 5 */
#define XSEM_REG_TS_5_AS 0x28004c
/* [RW 3] The arbitration scheme of time_slot 6 */
#define XSEM_REG_TS_6_AS 0x280050
/* [RW 3] The arbitration scheme of time_slot 7 */
#define XSEM_REG_TS_7_AS 0x280054
/* [RW 3] The arbitration scheme of time_slot 8 */
#define XSEM_REG_TS_8_AS 0x280058
/* [RW 3] The arbitration scheme of time_slot 9 */
#define XSEM_REG_TS_9_AS 0x28005c
/* [RW 32] Interrupt mask register #0 read/write */
#define XSEM_REG_XSEM_INT_MASK_0 0x280110
#define XSEM_REG_XSEM_INT_MASK_1 0x280120
/* [R 32] Interrupt register #0 read */
#define XSEM_REG_XSEM_INT_STS_0 0x280104
#define XSEM_REG_XSEM_INT_STS_1 0x280114
/* [RW 32] Parity mask register #0 read/write */
#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
/* [R 32] Parity register #0 read */
#define XSEM_REG_XSEM_PRTY_STS_0 0x280124
#define XSEM_REG_XSEM_PRTY_STS_1 0x280134
#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
#define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0)
#define MCPR_NVM_COMMAND_DOIT (1L<<4)
#define MCPR_NVM_COMMAND_DONE (1L<<3)
#define MCPR_NVM_COMMAND_FIRST (1L<<7)
#define MCPR_NVM_COMMAND_LAST (1L<<8)
#define MCPR_NVM_COMMAND_WR (1L<<5)
#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
#define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3)
#define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
#define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3)
#define BIGMAC_REGISTER_RX_CONTROL (0x21<<3)
#define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3)
#define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3)
#define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3)
#define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3)
#define BIGMAC_REGISTER_TX_CONTROL (0x07<<3)
#define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3)
#define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3)
#define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3)
#define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3)
#define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3)
#define BIGMAC2_REGISTER_BMAC_CONTROL (0x00<<3)
#define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
#define BIGMAC2_REGISTER_PFC_CONTROL (0x06<<3)
#define BIGMAC2_REGISTER_RX_CONTROL (0x3A<<3)
#define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS (0x62<<3)
#define BIGMAC2_REGISTER_RX_MAX_SIZE (0x3C<<3)
#define BIGMAC2_REGISTER_TX_CONTROL (0x1C<<3)
#define BIGMAC2_REGISTER_TX_MAX_SIZE (0x1E<<3)
#define BIGMAC2_REGISTER_TX_SOURCE_ADDR (0x1D<<3)
#define EMAC_LED_1000MB_OVERRIDE (1L<<1)
#define EMAC_LED_100MB_OVERRIDE (1L<<2)
#define EMAC_LED_10MB_OVERRIDE (1L<<3)
#define EMAC_LED_2500MB_OVERRIDE (1L<<12)
#define EMAC_LED_OVERRIDE (1L<<0)
#define EMAC_LED_TRAFFIC (1L<<6)
#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
#define EMAC_MDIO_COMM_DATA (0xffffL<<0)
#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
#define EMAC_MDIO_MODE_CLAUSE_45 (1<<31)
#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16)
#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16
#define EMAC_MODE_25G_MODE (1L<<5)
#define EMAC_MODE_HALF_DUPLEX (1L<<1)
#define EMAC_MODE_PORT_GMII (2L<<2)
#define EMAC_MODE_PORT_MII (1L<<2)
#define EMAC_MODE_PORT_MII_10M (3L<<2)
#define EMAC_MODE_RESET (1L<<0)
#define EMAC_REG_EMAC_LED 0xc
#define EMAC_REG_EMAC_MAC_MATCH 0x10
#define EMAC_REG_EMAC_MDIO_COMM 0xac
#define EMAC_REG_EMAC_MDIO_MODE 0xb4
#define EMAC_REG_EMAC_MODE 0x0
#define EMAC_REG_EMAC_RX_MODE 0xc8
#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
#define EMAC_REG_EMAC_RX_STAT_AC 0x180
#define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4
#define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23
#define EMAC_REG_EMAC_TX_MODE 0xbc
#define EMAC_REG_EMAC_TX_STAT_AC 0x280
#define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
#define EMAC_RX_MODE_FLOW_EN (1L<<2)
#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
#define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
#define EMAC_RX_MODE_RESET (1L<<0)
#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1<<31)
#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
#define EMAC_TX_MODE_FLOW_EN (1L<<4)
#define EMAC_TX_MODE_RESET (1L<<0)
#define MISC_REGISTERS_GPIO_0 0
#define MISC_REGISTERS_GPIO_1 1
#define MISC_REGISTERS_GPIO_2 2
#define MISC_REGISTERS_GPIO_3 3
#define MISC_REGISTERS_GPIO_CLR_POS 16
#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24)
#define MISC_REGISTERS_GPIO_FLOAT_POS 24
#define MISC_REGISTERS_GPIO_HIGH 1
#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2
#define MISC_REGISTERS_GPIO_INT_CLR_POS 24
#define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR 0
#define MISC_REGISTERS_GPIO_INT_OUTPUT_SET 1
#define MISC_REGISTERS_GPIO_INT_SET_POS 16
#define MISC_REGISTERS_GPIO_LOW 0
#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1
#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0
#define MISC_REGISTERS_GPIO_PORT_SHIFT 4
#define MISC_REGISTERS_GPIO_SET_POS 8
#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
#define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7)
#define MISC_REGISTERS_RESET_REG_1_SET 0x584
#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
#define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0)
#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14)
#define MISC_REGISTERS_RESET_REG_2_SET 0x594
#define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
#define MISC_REGISTERS_SPIO_4 4
#define MISC_REGISTERS_SPIO_5 5
#define MISC_REGISTERS_SPIO_7 7
#define MISC_REGISTERS_SPIO_CLR_POS 16
#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24)
#define MISC_REGISTERS_SPIO_FLOAT_POS 24
#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2
#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16
#define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1
#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0
#define MISC_REGISTERS_SPIO_SET_POS 8
#define HW_LOCK_MAX_RESOURCE_VALUE 31
#define HW_LOCK_RESOURCE_GPIO 1
#define HW_LOCK_RESOURCE_MDIO 0
#define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3
#define HW_LOCK_RESOURCE_SPIO 2
#define HW_LOCK_RESOURCE_UNDI 5
#define PRS_FLAG_OVERETH_IPV4 1
#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1UL<<18)
#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1UL<<31)
#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1UL<<9)
#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (1UL<<8)
#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (1UL<<7)
#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (1UL<<6)
#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (1UL<<29)
#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (1UL<<28)
#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (1UL<<1)
#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (1UL<<0)
#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (1UL<<18)
#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1UL<<11)
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1UL<<13)
#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1UL<<12)
#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0 (1UL<<5)
#define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1 (1UL<<9)
#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1UL<<12)
#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (1UL<<15)
#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (1UL<<14)
#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (1UL<<20)
#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (1UL<<0)
#define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT (1UL<<31)
#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (1UL<<3)
#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (1UL<<2)
#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (1UL<<5)
#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (1UL<<4)
#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1UL<<3)
#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1UL<<2)
#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1UL<<22)
#define AEU_INPUTS_ATTN_BITS_SPIO5 (1UL<<15)
#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1UL<<27)
#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1UL<<5)
#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1UL<<25)
#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (1UL<<24)
#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (1UL<<29)
#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (1UL<<28)
#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (1UL<<23)
#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (1UL<<27)
#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (1UL<<26)
#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (1UL<<21)
#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (1UL<<20)
#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (1UL<<25)
#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (1UL<<24)
#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (1UL<<16)
#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (1UL<<9)
#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (1UL<<7)
#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (1UL<<6)
#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (1UL<<11)
#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1UL<<10)
#define RESERVED_GENERAL_ATTENTION_BIT_0 0
#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3ffe0
#define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000
#define RESERVED_GENERAL_ATTENTION_BIT_6 6
#define RESERVED_GENERAL_ATTENTION_BIT_7 7
#define RESERVED_GENERAL_ATTENTION_BIT_8 8
#define RESERVED_GENERAL_ATTENTION_BIT_9 9
#define RESERVED_GENERAL_ATTENTION_BIT_10 10
#define RESERVED_GENERAL_ATTENTION_BIT_11 11
#define RESERVED_GENERAL_ATTENTION_BIT_12 12
#define RESERVED_GENERAL_ATTENTION_BIT_13 13
#define RESERVED_GENERAL_ATTENTION_BIT_14 14
#define RESERVED_GENERAL_ATTENTION_BIT_15 15
#define RESERVED_GENERAL_ATTENTION_BIT_16 16
#define RESERVED_GENERAL_ATTENTION_BIT_17 17
#define RESERVED_GENERAL_ATTENTION_BIT_18 18
#define RESERVED_GENERAL_ATTENTION_BIT_19 19
#define RESERVED_GENERAL_ATTENTION_BIT_20 20
#define RESERVED_GENERAL_ATTENTION_BIT_21 21
/* storm asserts attention bits */
#define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7
#define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8
#define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9
#define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10
/* mcp error attention bit */
#define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11
/* E1H NIG status sync attention mapped to group 4-7*/
#define LINK_SYNC_ATTENTION_BIT_FUNC_0 RESERVED_GENERAL_ATTENTION_BIT_12
#define LINK_SYNC_ATTENTION_BIT_FUNC_1 RESERVED_GENERAL_ATTENTION_BIT_13
#define LINK_SYNC_ATTENTION_BIT_FUNC_2 RESERVED_GENERAL_ATTENTION_BIT_14
#define LINK_SYNC_ATTENTION_BIT_FUNC_3 RESERVED_GENERAL_ATTENTION_BIT_15
#define LINK_SYNC_ATTENTION_BIT_FUNC_4 RESERVED_GENERAL_ATTENTION_BIT_16
#define LINK_SYNC_ATTENTION_BIT_FUNC_5 RESERVED_GENERAL_ATTENTION_BIT_17
#define LINK_SYNC_ATTENTION_BIT_FUNC_6 RESERVED_GENERAL_ATTENTION_BIT_18
#define LINK_SYNC_ATTENTION_BIT_FUNC_7 RESERVED_GENERAL_ATTENTION_BIT_19
#define LATCHED_ATTN_RBCR 23
#define LATCHED_ATTN_RBCT 24
#define LATCHED_ATTN_RBCN 25
#define LATCHED_ATTN_RBCU 26
#define LATCHED_ATTN_RBCP 27
#define LATCHED_ATTN_TIMEOUT_GRC 28
#define LATCHED_ATTN_RSVD_GRC 29
#define LATCHED_ATTN_ROM_PARITY_MCP 30
#define LATCHED_ATTN_UM_RX_PARITY_MCP 31
#define LATCHED_ATTN_UM_TX_PARITY_MCP 32
#define LATCHED_ATTN_SCPAD_PARITY_MCP 33
#define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
#define GENERAL_ATTEN_OFFSET(atten_name) \
(1UL << ((94 + atten_name) % 32))
/*
* This file defines GRC base address for every block.
* This file is included by chipsim, asm microcode and cpp microcode.
* These values are used in Design.xml on regBase attribute
* Use the base with the generated offsets of specific registers.
*/
#define GRCBASE_PXPCS 0x000000
#define GRCBASE_PCICONFIG 0x002000
#define GRCBASE_PCIREG 0x002400
#define GRCBASE_EMAC0 0x008000
#define GRCBASE_EMAC1 0x008400
#define GRCBASE_DBU 0x008800
#define GRCBASE_MISC 0x00A000
#define GRCBASE_DBG 0x00C000
#define GRCBASE_NIG 0x010000
#define GRCBASE_XCM 0x020000
#define GRCBASE_PRS 0x040000
#define GRCBASE_SRCH 0x040400
#define GRCBASE_TSDM 0x042000
#define GRCBASE_TCM 0x050000
#define GRCBASE_BRB1 0x060000
#define GRCBASE_MCP 0x080000
#define GRCBASE_UPB 0x0C1000
#define GRCBASE_CSDM 0x0C2000
#define GRCBASE_USDM 0x0C4000
#define GRCBASE_CCM 0x0D0000
#define GRCBASE_UCM 0x0E0000
#define GRCBASE_CDU 0x101000
#define GRCBASE_DMAE 0x102000
#define GRCBASE_PXP 0x103000
#define GRCBASE_CFC 0x104000
#define GRCBASE_HC 0x108000
#define GRCBASE_PXP2 0x120000
#define GRCBASE_PBF 0x140000
#define GRCBASE_XPB 0x161000
#define GRCBASE_TIMERS 0x164000
#define GRCBASE_XSDM 0x166000
#define GRCBASE_QM 0x168000
#define GRCBASE_DQ 0x170000
#define GRCBASE_TSEM 0x180000
#define GRCBASE_CSEM 0x200000
#define GRCBASE_XSEM 0x280000
#define GRCBASE_USEM 0x300000
#define GRCBASE_MISC_AEU GRCBASE_MISC
/* offset of configuration space in the pci core register */
#define PCICFG_OFFSET 0x2000
#define PCICFG_VENDOR_ID_OFFSET 0x00
#define PCICFG_DEVICE_ID_OFFSET 0x02
#define PCICFG_COMMAND_OFFSET 0x04
#define PCICFG_COMMAND_IO_SPACE (1<<0)
#define PCICFG_COMMAND_MEM_SPACE (1<<1)
#define PCICFG_COMMAND_BUS_MASTER (1<<2)
#define PCICFG_COMMAND_SPECIAL_CYCLES (1<<3)
#define PCICFG_COMMAND_MWI_CYCLES (1<<4)
#define PCICFG_COMMAND_VGA_SNOOP (1<<5)
#define PCICFG_COMMAND_PERR_ENA (1<<6)
#define PCICFG_COMMAND_STEPPING (1<<7)
#define PCICFG_COMMAND_SERR_ENA (1<<8)
#define PCICFG_COMMAND_FAST_B2B (1<<9)
#define PCICFG_COMMAND_INT_DISABLE (1<<10)
#define PCICFG_COMMAND_RESERVED (0x1f<<11)
#define PCICFG_STATUS_OFFSET 0x06
#define PCICFG_REVESION_ID_OFFSET 0x08
#define PCICFG_CACHE_LINE_SIZE 0x0c
#define PCICFG_LATENCY_TIMER 0x0d
#define PCICFG_BAR_1_LOW 0x10
#define PCICFG_BAR_1_HIGH 0x14
#define PCICFG_BAR_2_LOW 0x18
#define PCICFG_BAR_2_HIGH 0x1c
#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c
#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e
#define PCICFG_INT_LINE 0x3c
#define PCICFG_INT_PIN 0x3d
#define PCICFG_PM_CAPABILITY 0x48
#define PCICFG_PM_CAPABILITY_VERSION (0x3<<16)
#define PCICFG_PM_CAPABILITY_CLOCK (1<<19)
#define PCICFG_PM_CAPABILITY_RESERVED (1<<20)
#define PCICFG_PM_CAPABILITY_DSI (1<<21)
#define PCICFG_PM_CAPABILITY_AUX_CURRENT (0x7<<22)
#define PCICFG_PM_CAPABILITY_D1_SUPPORT (1<<25)
#define PCICFG_PM_CAPABILITY_D2_SUPPORT (1<<26)
#define PCICFG_PM_CAPABILITY_PME_IN_D0 (1<<27)
#define PCICFG_PM_CAPABILITY_PME_IN_D1 (1<<28)
#define PCICFG_PM_CAPABILITY_PME_IN_D2 (1<<29)
#define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT (1<<30)
#define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD (1<<31)
#define PCICFG_PM_CSR_OFFSET 0x4c
#define PCICFG_PM_CSR_STATE (0x3<<0)
#define PCICFG_PM_CSR_PME_ENABLE (1<<8)
#define PCICFG_PM_CSR_PME_STATUS (1<<15)
#define PCICFG_MSI_CAP_ID_OFFSET 0x58
#define PCICFG_MSI_CONTROL_ENABLE (0x1<<16)
#define PCICFG_MSI_CONTROL_MCAP (0x7<<17)
#define PCICFG_MSI_CONTROL_MENA (0x7<<20)
#define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23)
#define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24)
#define PCICFG_GRC_ADDRESS 0x78
#define PCICFG_GRC_DATA 0x80
#define PCICFG_MSIX_CAP_ID_OFFSET 0xa0
#define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16)
#define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27)
#define PCICFG_MSIX_CONTROL_FUNC_MASK (0x1<<30)
#define PCICFG_MSIX_CONTROL_MSIX_ENABLE (0x1<<31)
#define PCICFG_DEVICE_CONTROL 0xb4
#define PCICFG_DEVICE_STATUS 0xb6
#define PCICFG_DEVICE_STATUS_CORR_ERR_DET (1<<0)
#define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET (1<<1)
#define PCICFG_DEVICE_STATUS_FATAL_ERR_DET (1<<2)
#define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET (1<<3)
#define PCICFG_DEVICE_STATUS_AUX_PWR_DET (1<<4)
#define PCICFG_DEVICE_STATUS_NO_PEND (1<<5)
#define PCICFG_LINK_CONTROL 0xbc
#define BAR_USTORM_INTMEM 0x400000
#define BAR_CSTORM_INTMEM 0x410000
#define BAR_XSTORM_INTMEM 0x420000
#define BAR_TSTORM_INTMEM 0x430000
/* for accessing the IGU in case of status block ACK */
#define BAR_IGU_INTMEM 0x440000
#define BAR_DOORBELL_OFFSET 0x800000
#define BAR_ME_REGISTER 0x450000
#define ME_REG_PF_NUM (7L<<0) /* Relative PF Num */
#define ME_REG_PF_NUM_SHIFT 0
#define ME_REG_ABS_PF_NUM (7L<<16) /* Absolute PF Num */
#define ME_REG_ABS_PF_NUM_SHIFT 16
/* config_2 offset */
#define GRC_CONFIG_2_SIZE_REG 0x408
#define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0)
#define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0)
#define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0)
#define PCI_CONFIG_2_BAR1_64ENA (1L<<4)
#define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5)
#define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6)
#define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7)
#define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8)
#define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8)
#define PCI_CONFIG_2_BAR_PREFETCH (1L<<16)
#define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17)
/* config_3 offset */
#define GRC_CONFIG_3_SIZE_REG 0x40c
#define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0)
#define PCI_CONFIG_3_FORCE_PME (1L<<24)
#define PCI_CONFIG_3_PME_STATUS (1L<<25)
#define PCI_CONFIG_3_PME_ENABLE (1L<<26)
#define PCI_CONFIG_3_PM_STATE (0x3L<<27)
#define PCI_CONFIG_3_VAUX_PRESET (1L<<30)
#define PCI_CONFIG_3_PCI_POWER (1L<<31)
#define GRC_BAR2_CONFIG 0x4e0
#define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0)
#define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0)
#define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0)
#define PCI_CONFIG_2_BAR2_64ENA (1L<<4)
#define PCI_PM_DATA_A 0x410
#define PCI_PM_DATA_B 0x414
#define PCI_ID_VAL1 0x434
#define PCI_ID_VAL2 0x438
#define MDIO_REG_BANK_CL73_IEEEB0 0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000
#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
#define MDIO_REG_BANK_CL73_IEEEB1 0x10
#define MDIO_CL73_IEEEB1_AN_ADV1 0x00
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE 0x0400
#define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC 0x0800
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH 0x0C00
#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK 0x0C00
#define MDIO_CL73_IEEEB1_AN_ADV2 0x01
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
#define MDIO_CL73_IEEEB1_AN_LP_ADV1 0x03
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE 0x0400
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC 0x0800
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH 0x0C00
#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK 0x0C00
#define MDIO_REG_BANK_RX0 0x80b0
#define MDIO_RX0_RX_STATUS 0x10
#define MDIO_RX0_RX_STATUS_SIGDET 0x8000
#define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000
#define MDIO_RX0_RX_EQ_BOOST 0x1c
#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_RX1 0x80c0
#define MDIO_RX1_RX_EQ_BOOST 0x1c
#define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
#define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_RX2 0x80d0
#define MDIO_RX2_RX_EQ_BOOST 0x1c
#define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
#define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_RX3 0x80e0
#define MDIO_RX3_RX_EQ_BOOST 0x1c
#define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
#define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_RX_ALL 0x80f0
#define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
#define MDIO_REG_BANK_TX0 0x8060
#define MDIO_TX0_TX_DRIVER 0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_TX1 0x8070
#define MDIO_TX1_TX_DRIVER 0x17
#define MDIO_TX1_TX_DRIVER_PREEMPHASIS_MASK 0xf000
#define MDIO_TX1_TX_DRIVER_PREEMPHASIS_SHIFT 12
#define MDIO_TX1_TX_DRIVER_IDRIVER_MASK 0x0f00
#define MDIO_TX1_TX_DRIVER_IDRIVER_SHIFT 8
#define MDIO_TX1_TX_DRIVER_IPREDRIVER_MASK 0x00f0
#define MDIO_TX1_TX_DRIVER_IPREDRIVER_SHIFT 4
#define MDIO_TX1_TX_DRIVER_IFULLSPD_MASK 0x000e
#define MDIO_TX1_TX_DRIVER_IFULLSPD_SHIFT 1
#define MDIO_TX1_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_TX2 0x8080
#define MDIO_TX2_TX_DRIVER 0x17
#define MDIO_TX2_TX_DRIVER_PREEMPHASIS_MASK 0xf000
#define MDIO_TX2_TX_DRIVER_PREEMPHASIS_SHIFT 12
#define MDIO_TX2_TX_DRIVER_IDRIVER_MASK 0x0f00
#define MDIO_TX2_TX_DRIVER_IDRIVER_SHIFT 8
#define MDIO_TX2_TX_DRIVER_IPREDRIVER_MASK 0x00f0
#define MDIO_TX2_TX_DRIVER_IPREDRIVER_SHIFT 4
#define MDIO_TX2_TX_DRIVER_IFULLSPD_MASK 0x000e
#define MDIO_TX2_TX_DRIVER_IFULLSPD_SHIFT 1
#define MDIO_TX2_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_TX3 0x8090
#define MDIO_TX3_TX_DRIVER 0x17
#define MDIO_TX3_TX_DRIVER_PREEMPHASIS_MASK 0xf000
#define MDIO_TX3_TX_DRIVER_PREEMPHASIS_SHIFT 12
#define MDIO_TX3_TX_DRIVER_IDRIVER_MASK 0x0f00
#define MDIO_TX3_TX_DRIVER_IDRIVER_SHIFT 8
#define MDIO_TX3_TX_DRIVER_IPREDRIVER_MASK 0x00f0
#define MDIO_TX3_TX_DRIVER_IPREDRIVER_SHIFT 4
#define MDIO_TX3_TX_DRIVER_IFULLSPD_MASK 0x000e
#define MDIO_TX3_TX_DRIVER_IFULLSPD_SHIFT 1
#define MDIO_TX3_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
#define MDIO_BLOCK0_XGXS_CONTROL 0x10
#define MDIO_REG_BANK_XGXS_BLOCK1 0x8010
#define MDIO_BLOCK1_LANE_CTRL0 0x15
#define MDIO_BLOCK1_LANE_CTRL1 0x16
#define MDIO_BLOCK1_LANE_CTRL2 0x17
#define MDIO_BLOCK1_LANE_PRBS 0x19
#define MDIO_REG_BANK_XGXS_BLOCK2 0x8100
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001
#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010
#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
#define MDIO_REG_BANK_GP_STATUS 0x8120
#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
#define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS 0x10
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK 0x8000
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13
#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1)
#define MDIO_REG_BANK_SERDES_DIGITAL 0x8300
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2 0x15
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED 0x0002
#define MDIO_SERDES_DIGITAL_MISC1 0x18
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000
#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008
#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009
#define MDIO_REG_BANK_OVER_1G 0x8320
#define MDIO_OVER_1G_DIGCTL_3_4 0x14
#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0
#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5
#define MDIO_OVER_1G_UP1 0x19
#define MDIO_OVER_1G_UP1_2_5G 0x0001
#define MDIO_OVER_1G_UP1_5G 0x0002
#define MDIO_OVER_1G_UP1_6G 0x0004
#define MDIO_OVER_1G_UP1_10G 0x0010
#define MDIO_OVER_1G_UP1_10GH 0x0008
#define MDIO_OVER_1G_UP1_12G 0x0020
#define MDIO_OVER_1G_UP1_12_5G 0x0040
#define MDIO_OVER_1G_UP1_13G 0x0080
#define MDIO_OVER_1G_UP1_15G 0x0100
#define MDIO_OVER_1G_UP1_16G 0x0200
#define MDIO_OVER_1G_UP2 0x1A
#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007
#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038
#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0
#define MDIO_OVER_1G_UP3 0x1B
#define MDIO_OVER_1G_UP3_HIGIG2 0x0001
#define MDIO_OVER_1G_LP_UP1 0x1C
#define MDIO_OVER_1G_LP_UP2 0x1D
#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780
#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
#define MDIO_OVER_1G_LP_UP3 0x1E
#define MDIO_REG_BANK_REMOTE_PHY 0x8330
#define MDIO_REMOTE_PHY_MISC_RX_STATUS 0x10
#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG 0x0010
#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG 0x0600
#define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
#define MDIO_REG_BANK_CL73_USERB0 0x8370
#define MDIO_CL73_USERB0_CL73_UCTRL 0x10
#define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL 0x0002
#define MDIO_CL73_USERB0_CL73_USTAT1 0x11
#define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK 0x0100
#define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37 0x0400
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000
#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14
#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001
#define MDIO_REG_BANK_AER_BLOCK 0xFFD0
#define MDIO_AER_BLOCK_AER_REG 0x1E
#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0
#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000
#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040
#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100
#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200
#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000
#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000
#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000
#define MDIO_COMBO_IEEE0_MII_STATUS 0x11
#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004
#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020
/*
* WhenthelinkpartnerisinSGMIImode(bit0=1),the
* bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
* Theotherbitsarereservedandshouldbezero
*/
#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
#define MDIO_PMA_DEVAD 0x1
/*ieee*/
#define MDIO_PMA_REG_CTRL 0x0
#define MDIO_PMA_REG_STATUS 0x1
#define MDIO_PMA_REG_10G_CTRL2 0x7
#define MDIO_PMA_REG_RX_SD 0xa
/*bcm*/
#define MDIO_PMA_REG_BCM_CTRL 0x0096
#define MDIO_PMA_REG_FEC_CTRL 0x00ab
#define MDIO_PMA_REG_RX_ALARM_CTRL 0x9000
#define MDIO_PMA_REG_LASI_CTRL 0x9002
#define MDIO_PMA_REG_RX_ALARM 0x9003
#define MDIO_PMA_REG_TX_ALARM 0x9004
#define MDIO_PMA_REG_LASI_STATUS 0x9005
#define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800
#define MDIO_PMA_REG_DIGITAL_CTRL 0xc808
#define MDIO_PMA_REG_DIGITAL_STATUS 0xc809
#define MDIO_PMA_REG_TX_POWER_DOWN 0xca02
#define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09
#define MDIO_PMA_REG_MISC_CTRL 0xca0a
#define MDIO_PMA_REG_GEN_CTRL 0xca10
#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188
#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a
#define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12
#define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13
#define MDIO_PMA_REG_ROM_VER1 0xca19
#define MDIO_PMA_REG_ROM_VER2 0xca1a
#define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b
#define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d
#define MDIO_PMA_REG_PLL_CTRL 0xca1e
#define MDIO_PMA_REG_MISC_CTRL0 0xca23
#define MDIO_PMA_REG_LRM_MODE 0xca3f
#define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46
#define MDIO_PMA_REG_MISC_CTRL1 0xca85
#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000
#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008
#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c
#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002
#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820
#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8726_TX_CTRL1 0xca01
#define MDIO_PMA_REG_8726_TX_CTRL2 0xca05
#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007
#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
#define MDIO_PMA_REG_8727_MISC_CTRL 0x8309
#define MDIO_PMA_REG_8727_TX_CTRL1 0xca02
#define MDIO_PMA_REG_8727_TX_CTRL2 0xca05
#define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808
#define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e
#define MDIO_PMA_REG_8073_CHIP_REV 0xc801
#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820
#define MDIO_PMA_REG_8073_XAUI_WA 0xc841
#define MDIO_PMA_REG_7101_RESET 0xc000
#define MDIO_PMA_REG_7107_LED_CNTL 0xc007
#define MDIO_PMA_REG_7101_VER1 0xc026
#define MDIO_PMA_REG_7101_VER2 0xc027
#define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811
#define MDIO_PMA_REG_8481_LED1_MASK 0xa82c
#define MDIO_PMA_REG_8481_LED2_MASK 0xa82f
#define MDIO_PMA_REG_8481_LED3_MASK 0xa832
#define MDIO_PMA_REG_8481_LED3_BLINK 0xa834
#define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835
#define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b
#define MDIO_WIS_DEVAD 0x2
/*bcm*/
#define MDIO_WIS_REG_LASI_CNTL 0x9002
#define MDIO_WIS_REG_LASI_STATUS 0x9005
#define MDIO_PCS_DEVAD 0x3
#define MDIO_PCS_REG_STATUS 0x0020
#define MDIO_PCS_REG_LASI_STATUS 0x9005
#define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000
#define MDIO_PCS_REG_7101_SPI_MUX 0xD008
#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7)
#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028
#define MDIO_XS_DEVAD 0x4
#define MDIO_XS_PLL_SEQUENCER 0x8000
#define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a
#define MDIO_XS_8706_REG_BANK_RX0 0x80bc
#define MDIO_XS_8706_REG_BANK_RX1 0x80cc
#define MDIO_XS_8706_REG_BANK_RX2 0x80dc
#define MDIO_XS_8706_REG_BANK_RX3 0x80ec
#define MDIO_XS_8706_REG_BANK_RXA 0x80fc
#define MDIO_AN_DEVAD 0x7
/*ieee*/
#define MDIO_AN_REG_CTRL 0x0000
#define MDIO_AN_REG_STATUS 0x0001
#define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020
#define MDIO_AN_REG_ADV_PAUSE 0x0010
#define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400
#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800
#define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00
#define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00
#define MDIO_AN_REG_ADV 0x0011
#define MDIO_AN_REG_ADV2 0x0012
#define MDIO_AN_REG_LP_AUTO_NEG 0x0013
#define MDIO_AN_REG_MASTER_STATUS 0x0021
/*bcm*/
#define MDIO_AN_REG_LINK_STATUS 0x8304
#define MDIO_AN_REG_CL37_CL73 0x8370
#define MDIO_AN_REG_CL37_AN 0xffe0
#define MDIO_AN_REG_CL37_FC_LD 0xffe4
#define MDIO_AN_REG_CL37_FC_LP 0xffe5
#define MDIO_AN_REG_8073_2_5G 0x8329
#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0
#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1
#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4
#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6
#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9
#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5
#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7
#define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc
#define IGU_FUNC_BASE 0x0400
#define IGU_ADDR_MSIX 0x0000
#define IGU_ADDR_INT_ACK 0x0200
#define IGU_ADDR_PROD_UPD 0x0201
#define IGU_ADDR_ATTN_BITS_UPD 0x0202
#define IGU_ADDR_ATTN_BITS_SET 0x0203
#define IGU_ADDR_ATTN_BITS_CLR 0x0204
#define IGU_ADDR_COALESCE_NOW 0x0205
#define IGU_ADDR_SIMD_MASK 0x0206
#define IGU_ADDR_SIMD_NOMASK 0x0207
#define IGU_ADDR_MSI_CTL 0x0210
#define IGU_ADDR_MSI_ADDR_LO 0x0211
#define IGU_ADDR_MSI_ADDR_HI 0x0212
#define IGU_ADDR_MSI_DATA 0x0213
#define IGU_INT_ENABLE 0
#define IGU_INT_DISABLE 1
#define IGU_INT_NOP 2
#define IGU_INT_NOP2 3
#define COMMAND_REG_INT_ACK 0x0
#define COMMAND_REG_PROD_UPD 0x4
#define COMMAND_REG_ATTN_BITS_UPD 0x8
#define COMMAND_REG_ATTN_BITS_SET 0xc
#define COMMAND_REG_ATTN_BITS_CLR 0x10
#define COMMAND_REG_COALESCE_NOW 0x14
#define COMMAND_REG_SIMD_MASK 0x18
#define COMMAND_REG_SIMD_NOMASK 0x1c
#define IGU_MEM_BASE 0x0000
#define IGU_MEM_MSIX_BASE 0x0000
#define IGU_MEM_MSIX_UPPER 0x007f
#define IGU_MEM_MSIX_RESERVED_UPPER 0x01ff
#define IGU_MEM_PBA_MSIX_BASE 0x0200
#define IGU_MEM_PBA_MSIX_UPPER 0x0200
#define IGU_CMD_BACKWARD_COMP_PROD_UPD 0x0201
#define IGU_MEM_PBA_MSIX_RESERVED_UPPER 0x03ff
#define IGU_CMD_INT_ACK_BASE 0x0400
#define IGU_CMD_INT_ACK_UPPER \
(IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
#define IGU_CMD_INT_ACK_RESERVED_UPPER 0x04ff
#define IGU_CMD_E2_PROD_UPD_BASE 0x0500
#define IGU_CMD_E2_PROD_UPD_UPPER \
(IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
#define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER 0x059f
#define IGU_CMD_ATTN_BIT_UPD_UPPER 0x05a0
#define IGU_CMD_ATTN_BIT_SET_UPPER 0x05a1
#define IGU_CMD_ATTN_BIT_CLR_UPPER 0x05a2
#define IGU_REG_SISR_MDPC_WMASK_UPPER 0x05a3
#define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER 0x05a4
#define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER 0x05a5
#define IGU_REG_SISR_MDPC_WOMASK_UPPER 0x05a6
#define IGU_REG_RESERVED_UPPER 0x05ff
#define CDU_REGION_NUMBER_XCM_AG 2
#define CDU_REGION_NUMBER_UCM_AG 4
/*
*
* String-to-compress [31:8] = CID (all 24 bits)
* String-to-compress [7:4] = Region
* String-to-compress [3:0] = Type
*/
#define CDU_VALID_DATA(_cid,_region, _type) \
(((_cid) << 8) | (((_region) & 0xf) << 4) | (((_type) & 0xf)))
#define CDU_CRC8(_cid, _region, _type) \
(calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type) \
(0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
#define CDU_RSRVD_VALUE_TYPE_B(_crc, _type) \
(0x80 | ((_type) & 0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7))
#define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) (((_val) & ~0x80)
/*
*****************************************************************************
* Description:
* Calculates crc 8 on a word value: polynomial 0-1-2-8
* Code was translated from Verilog.
* Return:
*****************************************************************************/
static __inline uint8_t
calc_crc8(uint32_t data, uint8_t crc)
{
uint8_t D[32];
uint8_t NewCRC[8];
uint8_t C[8];
uint8_t crc_res;
uint8_t i;
/* split the data into 31 bits */
for (i = 0; i < 32; i++) {
D[i] = (uint8_t)(data & 1);
data = data >> 1;
}
/* split the crc into 8 bits */
for (i = 0; i < 8; i++) {
C[i] = crc & 1;
crc = crc >> 1;
}
NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
C[6] ^ C[7];
NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^
C[6];
NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
C[0] ^ C[1] ^ C[4] ^ C[5];
NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
C[1] ^ C[2] ^ C[5] ^ C[6];
NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
C[3] ^ C[4] ^ C[7];
NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
C[5];
NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
C[6];
crc_res = 0;
for (i = 0; i < 8; i++)
crc_res |= (NewCRC[i] << i);
return (crc_res);
}
#endif /* _BXE_REG_H */
Reference in New Issue View Git Blame Copy Permalink