d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6e50170633
freebsd-dev/sys/dev/isci/scil/sati_mode_select.c
Jim Harris f11c7f6305 Add isci(4) driver for amd64 and i386 targets. 
The isci driver is for the integrated SAS controller in the Intel C600
(Patsburg) chipset.  Source files in sys/dev/isci directory are
FreeBSD-specific, and sys/dev/isci/scil subdirectory contains
an OS-agnostic library (SCIL) published by Intel to control the SAS
controller.  This library is used primarily as-is in this driver, with
some post-processing to better integrate into the kernel build
environment.

isci.4 and a README in the sys/dev/isci directory contain a few
additional details.

This driver is only built for amd64 and i386 targets.

Sponsored by: Intel
Reviewed by: scottl
Approved by: scottl
2012-01-31 19:38:18 +00:00

1116 lines
37 KiB
C
Raw Blame History

/*-
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/**
* @file
* @brief This file contains the method implementations required to
* translate the SCSI mode select (6 and 10-byte) commands with 5
* supported mode parameter pages (0x01, 0x02, 0x08, 0x0A, 0x1C).
*/
#if !defined(DISABLE_SATI_MODE_SELECT)
#include <dev/isci/scil/sati_mode_select.h>
#include <dev/isci/scil/sati_mode_pages.h>
#include <dev/isci/scil/sati_callbacks.h>
#include <dev/isci/scil/sci_object.h>
#include <dev/isci/scil/sati_translator_sequence.h>
#include <dev/isci/scil/sati_util.h>
//******************************************************************************
//* P R I V A T E M E T H O D S
//******************************************************************************
/**
* @brief This method will get medium type parameter field per CDB size.
*
* @param[in] scsi_io This parameter specifies the user's SCSI IO object
* for which to calculate the mode page header.
* @param[in] cdb_size This parameter specifies the number of bytes
* associated with the CDB for which to calculate the header.
*
* @return This method returns the medium type for the mode page header.
*/
static
U8 sati_mode_select_get_medium_type(
U8 * mode_parameters,
U32 cdb_size
)
{
U8 medium_type =0xFF;
SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_6_T * mode_parameters_6;
SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_10_T * mode_parameters_10;
if(cdb_size == 6)
{
mode_parameters_6 = (SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_6_T *) mode_parameters;
medium_type = mode_parameters_6->medium_type;
}
else if(cdb_size == 10)
{
mode_parameters_10 = (SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_10_T *) mode_parameters;
medium_type = mode_parameters_10->medium_type;
}
return medium_type;
}
/**
* @brief This method will retrieve Block Descriptor Length.
*
* @param[in] mode_parameters This parameter contains the address to the mode parameters.
* @param[in] cdb_size This parameter specifies the number of bytes
* associated with the CDB for which to process the block descriptor.
*
* @return This method returns the size, in bytes, for the mode parameter block descriptor.
*/
static
U32 sati_mode_select_get_mode_block_descriptor_length(
U8 * mode_parameters,
U32 cdb_size
)
{
U32 mode_block_descriptor_length = 0;
SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_6_T * mode_parameters_6;
SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_10_T * mode_parameters_10;
if(cdb_size == 6)
{
mode_parameters_6 = (SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_6_T *) mode_parameters;
mode_block_descriptor_length = mode_parameters_6->block_descriptor_length;
}
else if(cdb_size == 10)
{
mode_parameters_10 = (SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_10_T *) mode_parameters;
//Long LBA bit is the bit0 of the byte
//Spec says another way to get the block descriptor length to multiply the block number
// with block length (8 or 16), but we can get it directly.
mode_block_descriptor_length =(((U16)mode_parameters_10->block_descriptor_length[0]) << 8) +
mode_parameters_10->block_descriptor_length[1];
}
return mode_block_descriptor_length;
}
/**
* @brief This method will find the starting byte location for a page.
*
* @param[in] block_descriptor_length This parameter passes in the length of
* block descriptor.
* @param[in] cdb_size This parameter specifies the number of bytes
* associated with the CDB for which to calculate the header.
*
* @return This method returns the offset, for the mode page.
*/
static
U32 sati_mode_select_get_mode_page_offset(
U32 block_descriptor_length,
U32 cdb_size
)
{
U32 mode_page_offset;
if(cdb_size == 6)
{
mode_page_offset = sizeof(SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_6_T) + block_descriptor_length;
}
else if(cdb_size == 10)
{
mode_page_offset = sizeof(SCSI_MODE_SELECT_MODE_PARAMETER_HEADER_10_T) + block_descriptor_length;
}
else
{
mode_page_offset = 0;
}
return mode_page_offset;
}
/**
* @brief This method will set the initial Mode Select processing state.
*/
static
void sati_mode_select_initialize_mode_sel_processing_state(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 data_transfer_length,
U32 mode_page_offset
)
{
sequence->command_specific_data.process_state.ata_command_sent_for_cmp = 0;
sequence->command_specific_data.process_state.mode_page_offset=mode_page_offset;
sequence->command_specific_data.process_state.mode_pages_size = data_transfer_length - mode_page_offset;
sequence->command_specific_data.process_state.size_of_data_processed = 0;
sequence->command_specific_data.process_state.current_mode_page_processed = FALSE;
}
/**
* @brief This method will get mode page size.
*
* @param[in] page_code This parameter contains page code for the current mode page.
*
* @return This method returns the size of current mode page.
*/
static
U32 sati_mode_select_get_mode_page_size(
U8 page_code
)
{
U32 page_size=0;
switch (page_code)
{
case SCSI_MODE_PAGE_READ_WRITE_ERROR:
page_size=SCSI_MODE_PAGE_01_LENGTH;
break;
case SCSI_MODE_PAGE_DISCONNECT_RECONNECT:
page_size=SCSI_MODE_PAGE_02_LENGTH;
break;
case SCSI_MODE_PAGE_CACHING:
page_size=SCSI_MODE_PAGE_08_LENGTH;
break;
case SCSI_MODE_PAGE_CONTROL:
page_size=SCSI_MODE_PAGE_0A_LENGTH;
break;
case SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL:
page_size=SCSI_MODE_PAGE_1C_LENGTH;
break;
case SCSI_MODE_PAGE_POWER_CONDITION:
page_size=SCSI_MODE_PAGE_1A_LENGTH;
break;
default:
page_size=0;
break;
}
return page_size;
}
/**
* @brief This method will check the validity of parameter data of Read Write Error Recovery
* page and further processing the page data if necessary.
*
* @param[in] page_size This parameter specifies page size of current mode page.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_COMPLETE
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
static
SATI_STATUS sati_mode_select_process_mode_page_read_write_error_recovery(
SATI_TRANSLATOR_SEQUENCE_T* sequence,
void * scsi_io,
U32 page_size
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
U8 current_mode_page[SCSI_MODE_PAGE_01_LENGTH]={0,0,0,0,0,0,0,0,0,0,0,0};
U32 mode_page_offset;
mode_page_offset = sequence->command_specific_data.process_state.mode_page_offset;
//Check all the defined bits for this page
//SPF(0b); Page length 0x0A;AWRE 1; ARRE 0; Error recovery bits 0; RC 0;
//Recovery time limit last two bytes 0
sati_get_data_byte(sequence, scsi_io, mode_page_offset, &current_mode_page[0]);
sati_get_data_byte(sequence, scsi_io, mode_page_offset+1, &current_mode_page[1]);
sati_get_data_byte(sequence, scsi_io, mode_page_offset+2, &current_mode_page[2]);
sati_get_data_byte(sequence, scsi_io, mode_page_offset+10, &current_mode_page[10]);
sati_get_data_byte(sequence, scsi_io, mode_page_offset+11, &current_mode_page[11]);
if ( ((current_mode_page[0] & SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK)!= 0) ||
(current_mode_page[1] != (SCSI_MODE_PAGE_01_LENGTH - 2)) ||
((current_mode_page[2] & SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK) == 0) ||
((current_mode_page[2] & SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK) != 0) ||
((current_mode_page[2] & SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK) != 0) ||
(current_mode_page[10] != 0 ) ||
(current_mode_page[11] != 0 ) )
{
status = SATI_FAILURE_CHECK_RESPONSE_DATA;
return status;
}
//no need to send any command
{
sequence->command_specific_data.process_state.size_of_data_processed += page_size;
sequence->command_specific_data.process_state.mode_page_offset += page_size;
sequence->command_specific_data.process_state.current_mode_page_processed = TRUE;
}
status = SATI_COMPLETE;
return status;
}
/**
* @brief This method will check the validity of parameter data of Disconnect Reconnect mode
* page and further processing the page data if necessary.
*
* @param[in] page_size This parameter specifies page size of current mode page.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_COMPLETE
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
static
SATI_STATUS sati_mode_select_process_mode_page_disconnect_reconnect(
SATI_MODE_SELECT_PROCESSING_STATE_T * mode_select_process_state,
U32 page_size
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
// No need to check data for valid or invalid this page (undefined)
// No ata command to send
{
mode_select_process_state->size_of_data_processed += page_size;
mode_select_process_state->mode_page_offset += page_size;
mode_select_process_state->current_mode_page_processed = TRUE;
}
// No further interaction with remote devices
status = SATI_COMPLETE;
return status;
}
/**
* @brief This method will check the validity of parameter data of Caching mode
* page and issue multiple ATA set feature commands to complete the translation.
*
* @param[in] page_size This parameter specifies page size of current mode page.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_COMPLETE
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
static
SATI_STATUS sati_mode_select_process_mode_page_caching(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 page_size
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
//SCSI_MODE_PAGE_08_LENGTH 0x14= 20
U8 current_mode_page[SCSI_MODE_PAGE_08_LENGTH] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
U32 mode_page_offset;
U32 index;
mode_page_offset = sequence->command_specific_data.process_state.mode_page_offset;
sequence->type = SATI_SEQUENCE_MODE_SELECT_MODE_PAGE_CACHING;
for(index = 0; index < SCSI_MODE_PAGE_08_LENGTH; index++)
{
sati_get_data_byte(sequence, scsi_io, mode_page_offset+index, &current_mode_page[index]);
}
//Check for data validity
//SPF(0b); Page length 0x12;Byte2 to Byte15 all 0 with exception DRA and WCE changeable
if (((current_mode_page[0] & SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK)!= 0) ||
(current_mode_page[1] != (SCSI_MODE_PAGE_08_LENGTH-2)) ||
((current_mode_page[2] | SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT)!=SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT) ||
(current_mode_page[3] != 0 ) ||
(current_mode_page[4] != 0 ) ||
(current_mode_page[5] != 0 ) ||
(current_mode_page[6] != 0 ) ||
(current_mode_page[7] != 0 ) ||
(current_mode_page[8] != 0 ) ||
(current_mode_page[9] != 0 ) ||
(current_mode_page[10] != 0 ) ||
(current_mode_page[11] != 0 ) ||
((current_mode_page[12] & SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS) != 0) ||
(current_mode_page[13] != 0 ) ||
(current_mode_page[14] != 0 ) ||
(current_mode_page[15] != 0 ))
{
//parameter data passed in containing data that doesn't meet the SAT-2 requirement
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
if(sequence->command_specific_data.process_state.ata_command_sent_for_cmp == 0)
{
//byte2 bit2 WCE==0 disable write cache WCE==1 enable write cache
//SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT ==0x4,
if ( (current_mode_page[2] & SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT) == 0)
sati_ata_set_features_construct(ata_io, sequence, ATA_SET_FEATURES_SUB_CMD_DISABLE_CACHE);
else
sati_ata_set_features_construct(ata_io, sequence, ATA_SET_FEATURES_SUB_CMD_ENABLE_CACHE);
}
else if(sequence->command_specific_data.process_state.ata_command_sent_for_cmp == 1)
{
// DRA bit is set to 0, enable Read look ahead AAh;
// DRA bit is set to 1, disable with set feature command 55h
// SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT== 0x20
if ( (current_mode_page[12] & SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT) == 0)
sati_ata_set_features_construct(ata_io, sequence,ATA_SET_FEATURES_SUB_CMD_ENABLE_READ_AHEAD);
else
sati_ata_set_features_construct(ata_io, sequence,ATA_SET_FEATURES_SUB_CMD_DISABLE_READ_AHEAD);
sequence->command_specific_data.process_state.size_of_data_processed += page_size;
sequence->command_specific_data.process_state.mode_page_offset += page_size;
sequence->command_specific_data.process_state.current_mode_page_processed = TRUE;
}
// No more ata commands to send
sequence->command_specific_data.process_state.ata_command_sent_for_cmp++;
status = SATI_SUCCESS;
return status;
}
/**
* @brief This method will check the validity of parameter data of Control mode
* page and further processing the page data if necessary.
*
* @param[in] mode_select_process_state This parameter points to the processing state fields
* of current mode page.
* @param[in] page_size This parameter specifies page size of current mode page.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_COMPLETE
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
static
SATI_STATUS sati_mode_select_process_mode_page_control(
SATI_TRANSLATOR_SEQUENCE_T* sequence,
void * scsi_io,
void * ata_io,
U32 page_size
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
//SCSI_MODE_PAGE_0A_LENGTH 12
U8 current_mode_page[SCSI_MODE_PAGE_0A_LENGTH]={0,0,0,0,0,0,0,0,0,0};
U32 mode_page_offset;
U32 index;
mode_page_offset = sequence->command_specific_data.process_state.mode_page_offset;
for(index = 0; index < SCSI_MODE_PAGE_0A_LENGTH; index++)
{
sati_get_data_byte(sequence, scsi_io, mode_page_offset+index, &current_mode_page[index]);
}
//bit 1 and 2 of byte3 Qerr full task management model etc. then both bits 0
//byte 8 and 9 busy time out period variable if not ffff setable?
//check for page data validity
//Byte2: 0000???0b Byte3: Queued Algorithm Modifier should be set to 1 QErr?
//Byte4: ??000??? Byte5: ?0???000
if (((current_mode_page[0] & SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK)!= 0) ||
(current_mode_page[1] != (SCSI_MODE_PAGE_0A_LENGTH - 2)) ||
((current_mode_page[2] & SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC) != 0) ||
((current_mode_page[3] & SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER) != 0) ||
((current_mode_page[4] & SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP ) != 0) ||
((current_mode_page[5] & SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO ) != 0 ) )
{
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
if ((current_mode_page[2] & SCSI_MODE_SELECT_MODE_PAGE_D_SENSE) != 0)
sequence->device->descriptor_sense_enable = SCSI_MODE_PAGE_CONTROL_D_SENSE_ENABLE;
else
sequence->device->descriptor_sense_enable = SCSI_MODE_PAGE_CONTROL_D_SENSE_DISABLE;
// no ata command need to be comfirmed
{
sequence->command_specific_data.process_state.size_of_data_processed += page_size;
sequence->command_specific_data.process_state.mode_page_offset += page_size;
sequence->command_specific_data.process_state.current_mode_page_processed = TRUE;
}
status = SATI_COMPLETE;
return status;
}
/**
* @brief This method will check the validity of parameter data of Information Exception Control
* mode page and further processing the page data if necessary.
*
* @param[in] page_size This parameter specifies page size of current mode page.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_COMPLETE
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
static
SATI_STATUS sati_mode_select_process_mode_page_informational_exception_control(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 page_size
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
//SCSI_MODE_PAGE_1C_LENGTH 12
U8 current_mode_page[SCSI_MODE_PAGE_1C_LENGTH]={0,0,0,0,0,0,0,0,0,0,0,0};
U32 mode_page_offset;
U32 index;
mode_page_offset = sequence->command_specific_data.process_state.mode_page_offset;
sequence->type = SATI_SEQUENCE_MODE_SELECT_MODE_INFORMATION_EXCEPT_CONTROL;
for(index = 0; index < 4; index++)
{
sati_get_data_byte(sequence, scsi_io, mode_page_offset+index, &current_mode_page[index]);
}
//Check for data validity
//SPF(0b); Page length 0x0A; Byte2 0????0?? Byte3: ????1100
//SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE same as REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6
//SCSI_MODE_PAGE_DEXCPT_ENABLE
if (((current_mode_page[0] & SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK)!= 0) ||
(current_mode_page[1] != (SCSI_MODE_PAGE_1C_LENGTH - 2)) ||
((current_mode_page[2] & SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST)!= 0 ) ||
((current_mode_page[3] & SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK) !=
SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE ))
{
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
// DEXCPT bit is set to 0, enable SMART reporting D8h;
// DEXCPT bit is set to 1, disable SMART reporting D9h
// SCSI_MODE_PAGE_DEXCPT_ENABLE== 0x08
if ( (current_mode_page[2] & SCSI_MODE_PAGE_DEXCPT_ENABLE) == 0)
sati_ata_smart_return_status_construct(ata_io, sequence, ATA_SMART_SUB_CMD_ENABLE);
else
sati_ata_smart_return_status_construct(ata_io, sequence, ATA_SMART_SUB_CMD_DISABLE);
sequence->command_specific_data.process_state.size_of_data_processed += page_size;
sequence->command_specific_data.process_state.mode_page_offset += page_size;
sequence->command_specific_data.process_state.current_mode_page_processed = TRUE;
// No more ata commands to send
status = SATI_SUCCESS;
return status;
}
/**
* @brief This method will check the validity of parameter data of Power Condition mode
* page and issue multiple ATA set feature commands to complete the translation.
*
* @param[in] mode_select_process_state This parameter points to the processing state fields
* of current mode page.
* @param[in] page_size This parameter specifies page size of current mode page.
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_COMPLETE
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
static
SATI_STATUS sati_mode_select_process_mode_page_power_condition(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 page_size
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
//SCSI_MODE_PAGE_1A_LENGTH 10
U8 current_mode_page[SCSI_MODE_PAGE_1A_LENGTH] = {0,0,0,0,0,0,0,0,0,0};
U32 mode_page_offset;
U32 index;
U32 timer = 0;
U16 count = 0;
mode_page_offset = sequence->command_specific_data.process_state.mode_page_offset;
sequence->type = SATI_SEQUENCE_MODE_SELECT_MODE_POWER_CONDITION;
for(index = 0; index < SCSI_MODE_PAGE_1A_LENGTH; index++)
{
sati_get_data_byte(sequence, scsi_io, mode_page_offset+index, &current_mode_page[index]);
}
//Check for data validity
//SPF(0b); Page length 0x0A;
if (((current_mode_page[0] & SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK)!= 0) ||
(current_mode_page[1] != (SCSI_MODE_PAGE_1A_LENGTH - 2) ) ||
((current_mode_page[3] & SCSI_MODE_PAGE_POWER_CONDITION_IDLE)!= 0)
)
{
//parameter data passed in containing data that doesn't meet the SAT-2 requirement
return SATI_FAILURE_CHECK_RESPONSE_DATA;
}
// STANDBY bit is set to 0, do nothing since the standby timer can't be set;
// STANDBY bit is set to 1, translate the standby timer
// SCSI_MODE_PAGE_POWER_CONDITION_STANDBY== 0x01
if (current_mode_page[3] & SCSI_MODE_PAGE_POWER_CONDITION_STANDBY)
{
timer = (current_mode_page[8]<<24) + (current_mode_page[9]<<16) + (current_mode_page[10]<<8) + current_mode_page[11];
//If the ATA IDENTIFY DEVICE data word 49, bit 13 is set to one,
if (sequence->device->capabilities & SATI_DEVICE_CAP_STANDBY_ENABLE)
{
if (timer == 0)
{
//TPV=0 send ATA STANDBY_IMMEDIATE
sati_ata_standby_immediate_construct(ata_io, sequence);
sequence->command_specific_data.translated_command = ATA_STANDBY_IMMED;
}
else if ((timer > 0) && (timer <= 12000))
{
//1 to 12 000 INT((z - 1) / 50) + 1
count = (U16)((timer -1) / 50) + 1;
sati_ata_standby_construct(ata_io, sequence, count);
}
else if ((timer > 12000) && (timer <= 12600))
{
//12 001 to 12 600 FCh
sati_ata_standby_construct(ata_io, sequence, 0xFC);
}
else if ((timer > 12600) && (timer <= 12750))
{
//12 601 to 12 750 FFh
sati_ata_standby_construct(ata_io, sequence, 0xFF);
}
else if ((timer > 12750) && (timer < 18000))
{
//12 751 to 17 999 F1h
sati_ata_standby_construct(ata_io, sequence, 0xF1);
}
else if ((timer >= 18000) && (timer <= 198000))
{
//18 000 to 198 000 INT(z / 18 000) + 240
count = (U16)(timer / 18000) + 240;
sati_ata_standby_construct(ata_io, sequence, count);
}
else
{
//All other values FDh
sati_ata_standby_construct(ata_io, sequence, 0xFD);
}
status = SATI_SUCCESS ;
}
else
{
status = SATI_FAILURE_CHECK_RESPONSE_DATA;
//If the ATA IDENTIFY DEVICE data word 49, bit 13 is set to 0
}
}
else
{
status = SATI_COMPLETE;
}
sequence->command_specific_data.process_state.size_of_data_processed += page_size;
sequence->command_specific_data.process_state.mode_page_offset += page_size;
sequence->command_specific_data.process_state.current_mode_page_processed = TRUE;
return status;
}
/**
* @brief This method will process the mode page.
*
*
* @return Indicate if the translation was successful.
* @retval SATI_SUCCESS
* @retval SATI_COMPLETE
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA
*/
static
SATI_STATUS sati_mode_select_process_mode_page(
SATI_TRANSLATOR_SEQUENCE_T* sequence,
void * scsi_io,
void * ata_io
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
U8 page_code;
U32 page_size = 0; // in bytes
U32 size_of_data_to_be_processed;
U8 page_code_byte;
U32 mode_page_offset;
mode_page_offset = sequence->command_specific_data.process_state.mode_page_offset;
sati_get_data_byte(sequence, scsi_io, mode_page_offset, &page_code_byte);
// No more pages.
if(sequence->command_specific_data.process_state.mode_pages_size >
sequence->command_specific_data.process_state.size_of_data_processed)
{
//SCSI_MODE_SENSE_PAGE_CODE_ENABLE==0x3f same for Mode Select
page_code = page_code_byte & SCSI_MODE_SENSE_PAGE_CODE_ENABLE;
page_size = sati_mode_select_get_mode_page_size(page_code);
size_of_data_to_be_processed = sequence->command_specific_data.process_state.mode_pages_size
- sequence->command_specific_data.process_state.size_of_data_processed;
if( page_size == 0 )
{
status = SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else
{
// process mode page
switch(page_code)
{
case SCSI_MODE_PAGE_READ_WRITE_ERROR:
status = sati_mode_select_process_mode_page_read_write_error_recovery(
sequence,
scsi_io,
page_size
);
break;
case SCSI_MODE_PAGE_DISCONNECT_RECONNECT:
status = sati_mode_select_process_mode_page_disconnect_reconnect(
&sequence->command_specific_data.process_state,
page_size
);
break;
case SCSI_MODE_PAGE_CACHING:
status = sati_mode_select_process_mode_page_caching(
sequence,
scsi_io,
ata_io,
page_size
);
break;
case SCSI_MODE_PAGE_CONTROL:
status = sati_mode_select_process_mode_page_control(
sequence,
scsi_io,
ata_io,
page_size
);
break;
case SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL:
status = sati_mode_select_process_mode_page_informational_exception_control(
sequence,
scsi_io,
ata_io,
page_size
);
break;
case SCSI_MODE_PAGE_POWER_CONDITION:
status = sati_mode_select_process_mode_page_power_condition(
sequence,
scsi_io,
ata_io,
page_size
);
break;
default:
break;
}
}
}
return status;
}
//******************************************************************************
//* P U B L I C M E T H O D S
//******************************************************************************
/**
* @brief This method will translate the SCSI Mode Select 6 byte or 10 byte command
* into corresponding ATA commands. Depending upon the capabilities
* supported by the target different ATA commands can be selected.
* Additionally, in some cases more than a single ATA command may
* be required.
*
* @return Indicate if the command translation succeeded.
* @retval SCI_SUCCESS This is returned if the command translation was
* successful.
* @retval SCI_COMPLETE This is returned if the command translation was
* successful and no ATA commands need to be set.
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if
* sense data has been created as a result of something specified
* in the parameter data fields.
*/
static
SATI_STATUS sati_mode_select_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io,
U32 cdb_size
)
{
SATI_STATUS status = SATI_FAILURE_CHECK_RESPONSE_DATA;
U32 mode_page_offset;
U32 block_descriptor_length;
U32 index;
U16 data_transfer_length;
U8 current_mode_parameters[8]={0,0,0,0,0,0,0,0};
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
// cdb_size must be 6 or 10
if(FALSE == (cdb_size == 6 || cdb_size == 10))
{
return status;
}
if(sequence->state == SATI_SEQUENCE_STATE_INITIAL)
{
sequence->command_specific_data.process_state.ata_command_sent_for_cmp = 0;
sequence->state = SATI_SEQUENCE_STATE_TRANSLATE_DATA;
}
//First, initializes mode_sel_processing_state
if ( sequence->command_specific_data.process_state.ata_command_sent_for_cmp == 0 )
{
if (cdb_size == 6)
{
//CDB byte 4 is the parameter length
data_transfer_length = sati_get_cdb_byte(cdb, 4);
}
else
{
//CDB byte 7 and 8 for Mode Select 10
data_transfer_length = (sati_get_cdb_byte(cdb, 7) << 8) + sati_get_cdb_byte(cdb, 8);
}
sequence->allocation_length = data_transfer_length;
//Get 8 bytes for headers (4 bytes for Mode Select 6 and 8 bytes for Mode Select 10)
for( index = 0; index < 8; index++ )
{
sati_get_data_byte(sequence, scsi_io, index, &current_mode_parameters[index]);
}
//medium type should be 0
if ( sati_mode_select_get_medium_type(current_mode_parameters, cdb_size) != 0 )
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_PARM_LIST,
SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST
);
return status;
}
block_descriptor_length = sati_mode_select_get_mode_block_descriptor_length(
current_mode_parameters,
cdb_size
);
mode_page_offset = sati_mode_select_get_mode_page_offset(
block_descriptor_length,
cdb_size
);
if(mode_page_offset > data_transfer_length)
{
sequence->state = SATI_SEQUENCE_STATE_FINAL;
status = SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else
{
sati_mode_select_initialize_mode_sel_processing_state(
sequence,
scsi_io,
ata_io,
data_transfer_length,
mode_page_offset
);
}
}
// move to next mode page
if(sequence->command_specific_data.process_state.current_mode_page_processed)
{
sequence->command_specific_data.process_state.ata_command_sent_for_cmp = 0;
sequence->command_specific_data.process_state.current_mode_page_processed = FALSE;
}
status = sati_mode_select_process_mode_page(sequence, scsi_io, ata_io);
if(sequence->command_specific_data.process_state.current_mode_page_processed != FALSE)
{
// Done this page
sequence->state = SATI_SEQUENCE_STATE_FINAL;
}
else
{
sequence->state = SATI_SEQUENCE_STATE_INCOMPLETE;
}
if(status == SATI_FAILURE_CHECK_RESPONSE_DATA)
{
sequence->state = SATI_SEQUENCE_STATE_FINAL;
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_PARM_LIST,
SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST
);
}
return status;
}
/**
* @brief This method will call Mode Select 6 Translation command
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the command translation succeeded.
* @retval SCI_SUCCESS This is returned if the command translation was
* successful.
* @retval SCI_COMPLETE This is returned if the command translation was
* successful and no ATA commands need to be set.
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if
* sense data has been created as a result of something specified
* in the parameter data fields.
*/
SATI_STATUS sati_mode_select_6_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
SATI_STATUS status=SATI_FAILURE;
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
//PF bit needs to be 1 byte1 bit ???1????
if ((sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SELECT_PF_MASK) == !SCSI_MODE_SELECT_PF_BIT)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_CDB,
SCSI_ASCQ_INVALID_FIELD_IN_CDB
);
status = SATI_FAILURE_CHECK_RESPONSE_DATA;
return status;
}
status=sati_mode_select_translate_command(
sequence,
scsi_io,
ata_io,
6
);
if(status == SATI_FAILURE_CHECK_RESPONSE_DATA)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_PARM_LIST,
SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST
);
}
return status;
}
/**
* @brief This method will call Mode Select 10 translation command
* For more information on the parameters passed to this method,
* please reference sati_translate_command().
*
* @return Indicate if the command translation succeeded.
* @retval SCI_SUCCESS This is returned if the command translation was
* successful.
* @retval SCI_COMPLETE This is returned if the command translation was
* successful and no ATA commands need to be set.
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if
* sense data has been created as a result of something specified
* in the parameter data fields.
*/
SATI_STATUS sati_mode_select_10_translate_command(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
SATI_STATUS status=SATI_FAILURE;
U8 * cdb = sati_cb_get_cdb_address(scsi_io);
//PF bit needs to be 1 byte1 bit ???1????
if ((sati_get_cdb_byte(cdb, 1) & SCSI_MODE_SELECT_PF_MASK) == !SCSI_MODE_SELECT_PF_BIT)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_CDB,
SCSI_ASCQ_INVALID_FIELD_IN_CDB
);
status = SATI_FAILURE_CHECK_RESPONSE_DATA;
return status;
}
status=sati_mode_select_translate_command(
sequence,
scsi_io,
ata_io,
10
);
if(status == SATI_FAILURE_CHECK_RESPONSE_DATA)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ILLEGAL_REQUEST,
SCSI_ASC_INVALID_FIELD_IN_PARM_LIST,
SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST
);
}
return status;
}
/**
* @brief This method will conduct error handling for the ATA Set Features command
* that is issued during a Mode Select translation for the Caching Mode
* page.
*
*
* @return Indicate if the command translation succeeded.
*
* @retval SCI_COMPLETE This is returned if the command translation was
* successful and no additional ATA commands need to be set.
* @retval SATI_FAILURE_CHECK_RESPONSE_DATA This value is returned if
* sense data has been created as a result of an error returned
*/
SATI_STATUS sati_mode_select_translate_response(
SATI_TRANSLATOR_SEQUENCE_T * sequence,
void * scsi_io,
void * ata_io
)
{
U8 * register_fis = sati_cb_get_d2h_register_fis_address(ata_io);
SATI_STATUS status = SATI_FAILURE;
if(sati_get_ata_status(register_fis) & ATA_STATUS_REG_ERROR_BIT)
{
sati_scsi_sense_data_construct(
sequence,
scsi_io,
SCSI_STATUS_CHECK_CONDITION,
SCSI_SENSE_ABORTED_COMMAND,
SCSI_ASC_NO_ADDITIONAL_SENSE,
SCSI_ASCQ_NO_ADDITIONAL_SENSE
);
status = SATI_FAILURE_CHECK_RESPONSE_DATA;
}
else
{
if (sequence->state == SATI_SEQUENCE_STATE_INCOMPLETE)
{
status = SATI_SEQUENCE_INCOMPLETE;
}
else
{
status = SATI_COMPLETE;
}
}
return status;
}
#endif // !defined(DISABLE_SATI_MODE_SELECT)
Reference in New Issue View Git Blame Copy Permalink