freebsd-dev/sys/dev/mfi/mfi_debug.c
Doug Ambrisko ddbffe7f70 First fix pr 167226:
ThunderBolt cannot read sector >= 2^32 or 2^21
with supplied patch.

Second the bigger change, fix RAID operation on ThunderBolt base
card such as physically removing a disk from a RAID and replacing
it.  The current situation is the RAID firmware effectively hangs
waiting for an acknowledgement from the driver.  This is due to
the firmware support of the driver actually accessing the RAID
from under the firmware.  This is an interesting feature that
the FreeBSD driver does not use.  However, when the firmare
detects the driver has attached it then expects the driver will
synchronize LD's with the firmware.  If the driver does not sync.
then the management part of the firmware will hang waiting for
it so a pulled driver will listed as still there.

The fix for this problem isn't extremely difficult.  However,
figuring out why some of the code was the way it was and then
redoing it was involved.  Not have a spec. made it harder to
try to figure out.  The existing driver would send a
MFI_DCMD_LD_MAP_GET_INFO command in write mode to acknowledge
a LD state change.  In read mode it gets the RAID map from the
firmware.  The FreeBSD driver doesn't do that currently.  It
could be added in the future with the appropriate structures.
To simplify things, get the current LD state and then build
the MFI_DCMD_LD_MAP_GET_INFO/write command so that it sends
an acknowledgement for each LD.  The map would probably state
which LD's changed so then the driver could probably just
acknowledge the LD's that changed versus all.  This doesn't seem
to be a problem.  When a MFI_DCMD_LD_MAP_GET_INFO/write command
is sent to the firmware, it will complete later when a change
to the LD's happen.  So it is very much like an AEN command
returning when something happened.  When the
MFI_DCMD_LD_MAP_GET_INFO/write command completes, we refire the
sync'ing of the LD state.  This needs to be done in as an event
so that MFI_DCMD_LD_GET_LIST can wait for that command to
complete before issuing the MFI_DCMD_LD_MAP_GET_INFO/write.
The prior code didn't use the call-back function and tried
to intercept the MFI_DCMD_LD_MAP_GET_INFO/write command when
processing an interrupt.  This added a bunch of code complexity
to the interrupt handler.  Using the call-back that is done
for other commands got rid of this need.  So the interrupt
handler is greatly simplified.  It seems that even commands
that shouldn't be acknowledged end up in the interrupt handler.
To deal with this, code was added to check to see if a command
is in the busy queue or not.  This might have contributed to the
interrupt storm happening without MSI enabled on these cards.

Note that MFI_DCMD_LD_MAP_GET_INFO/read returns right away.

It would be interesting to see what other complexity could
be removed from the ThunderBolt driver that really isn't
needed in our mode of operation.  Letting the RAID firmware
do all of the I/O to disks is a lot faster since it can
use its caches.  It greatly simplifies what the driver has
to do and potential bugs if the driver and firmware are
not in sync.

Simplify the aen_abort/cm_map_abort and put it in the softc
versus in the command structure.

This should get merged to 9 before the driver is merged to
8.

PR:		167226
Submitted by:	Petr Lampa
MFC after:	3 days
2012-05-04 16:00:39 +00:00

282 lines
6.6 KiB
C

/*-
* Copyright (c) 2006 IronPort Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_mfi.h"
#ifdef MFI_DEBUG
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/bus.h>
#include <sys/bio.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/malloc.h>
#include <sys/selinfo.h>
#include <sys/sysctl.h>
#include <sys/taskqueue.h>
#include <sys/uio.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <dev/mfi/mfireg.h>
#include <dev/mfi/mfi_ioctl.h>
#include <dev/mfi/mfivar.h>
static void
mfi_print_frame_flags(device_t dev, uint32_t flags)
{
device_printf(dev, "flags=%b\n", flags,
"\20"
"\1NOPOST"
"\2SGL64"
"\3SENSE64"
"\4WRITE"
"\5READ"
"\6IEEESGL");
}
static void
mfi_print_sgl(struct mfi_frame_header *hdr, union mfi_sgl *sgl, int count)
{
int i, columns = 0;
printf("SG List:\n");
for (i = 0; i < count; i++) {
if (hdr->flags & MFI_FRAME_IEEE_SGL) {
printf("0x%lx:%06d ", (u_long)sgl->sg_skinny[i].addr,
sgl->sg_skinny[i].len);
columns += 26;
if (columns > 77) {
printf("\n");
columns = 0;
}
} else if (hdr->flags & MFI_FRAME_SGL64) {
printf("0x%lx:%06d ", (u_long)sgl->sg64[i].addr,
sgl->sg64[i].len);
columns += 26;
if (columns > 77) {
printf("\n");
columns = 0;
}
} else {
printf("0x%x:%06d ", sgl->sg32[i].addr,
sgl->sg32[i].len);
columns += 18;
if (columns > 71) {
printf("\n");
columns = 0;
}
}
}
if (columns != 0)
printf("\n");
}
static void
mfi_print_ldio(struct mfi_softc *sc, device_t dev, struct mfi_command *cm)
{
struct mfi_io_frame *io;
struct mfi_frame_header *hdr;
io = &cm->cm_frame->io;
hdr = &io->header;
device_printf(dev, "cmd=%s target_id=%d sg_count=%d data_len=%d "
"lba=%d\n", (hdr->cmd == MFI_CMD_LD_READ) ? "LD_READ":"LD_WRITE",
hdr->target_id, hdr->sg_count, hdr->data_len, io->lba_lo);
mfi_print_frame_flags(dev, hdr->flags);
mfi_print_sgl(hdr, &io->sgl, hdr->sg_count);
}
static void
mfi_print_dcmd(struct mfi_softc *sc, device_t dev, struct mfi_command *cm)
{
struct mfi_dcmd_frame *dcmd;
struct mfi_frame_header *hdr;
const char *opcode;
dcmd = &cm->cm_frame->dcmd;
hdr = &dcmd->header;
switch (dcmd->opcode) {
case MFI_DCMD_CTRL_GETINFO:
opcode = "CTRL_GETINFO";
break;
case MFI_DCMD_CTRL_FLUSHCACHE:
opcode = "CTRL_FLUSHCACHE";
break;
case MFI_DCMD_CTRL_SHUTDOWN:
opcode = "CTRL_SHUTDOWN";
break;
case MFI_DCMD_CTRL_EVENT_GETINFO:
opcode = "EVENT_GETINFO";
break;
case MFI_DCMD_CTRL_EVENT_GET:
opcode = "EVENT_GET";
break;
case MFI_DCMD_CTRL_EVENT_WAIT:
opcode = "EVENT_WAIT";
break;
case MFI_DCMD_LD_GET_LIST:
opcode = "LD_GET_LIST";
break;
case MFI_DCMD_LD_GET_INFO:
opcode = "LD_GET_INFO";
break;
case MFI_DCMD_LD_GET_PROP:
opcode = "LD_GET_PROP";
break;
case MFI_DCMD_LD_SET_PROP:
opcode = "LD_SET_PROP";
break;
case MFI_DCMD_CLUSTER:
opcode = "CLUSTER";
break;
case MFI_DCMD_CLUSTER_RESET_ALL:
opcode = "CLUSTER_RESET_ALL";
break;
case MFI_DCMD_CLUSTER_RESET_LD:
opcode = "CLUSTER_RESET_LD";
break;
case MFI_DCMD_LD_MAP_GET_INFO:
opcode = "LD_MAP_GET_INFO";
break;
default:
opcode = "UNKNOWN";
break;
}
device_printf(dev, "cmd=MFI_CMD_DCMD opcode=%s data_len=%d\n",
opcode, hdr->data_len);
mfi_print_frame_flags(dev, hdr->flags);
mfi_print_sgl(hdr, &dcmd->sgl, hdr->sg_count);
}
static void
mfi_print_generic_frame(struct mfi_softc *sc, struct mfi_command *cm)
{
hexdump(cm->cm_frame, cm->cm_total_frame_size, NULL, HD_OMIT_CHARS);
}
void
mfi_print_cmd(struct mfi_command *cm)
{
device_t dev;
struct mfi_softc *sc;
sc = cm->cm_sc;
dev = sc->mfi_dev;
device_printf(dev, "cm=%p index=%d total_frame_size=%d "
"extra_frames=%d\n", cm, cm->cm_index, cm->cm_total_frame_size,
cm->cm_extra_frames);
device_printf(dev, "flags=%b\n", cm->cm_flags,
"\20"
"\1MAPPED"
"\2DATAIN"
"\3DATAOUT"
"\4COMPLETED"
"\5POLLED"
"\6Q_FREE"
"\7Q_READY"
"\10Q_BUSY");
switch (cm->cm_frame->header.cmd) {
case MFI_CMD_DCMD:
mfi_print_dcmd(sc, dev, cm);
break;
case MFI_CMD_LD_READ:
case MFI_CMD_LD_WRITE:
mfi_print_ldio(sc, dev, cm);
break;
default:
mfi_print_generic_frame(sc, cm);
break;
}
return;
}
void
mfi_dump_cmds(struct mfi_softc *sc)
{
int i;
for (i = 0; i < sc->mfi_total_cmds; i++)
mfi_print_generic_frame(sc, &sc->mfi_commands[i]);
}
void
mfi_validate_sg(struct mfi_softc *sc, struct mfi_command *cm,
const char *function, int line)
{
struct mfi_frame_header *hdr;
int i;
uint32_t count = 0, data_len;
hdr = &cm->cm_frame->header;
count = 0;
for (i = 0; i < hdr->sg_count; i++) {
if (hdr->flags & MFI_FRAME_IEEE_SGL)
count += cm->cm_sg->sg_skinny[i].len;
else if (hdr->flags & MFI_FRAME_SGL64)
count += cm->cm_sg->sg64[i].len;
else
count += cm->cm_sg->sg32[i].len;
}
/*
count++;
*/
data_len = hdr->data_len;
switch (hdr->cmd) {
case MFI_CMD_LD_READ:
case MFI_CMD_LD_WRITE:
data_len = data_len * 512;
case MFI_CMD_DCMD:
if (count != data_len) {
device_printf(sc->mfi_dev,
"%s %d COMMAND %p S/G count bad %d %d %d 0x%jx\n",
function, line, cm, count, data_len, cm->cm_len,
(intmax_t)pmap_kextract((vm_offset_t)cm->cm_data));
MFI_PRINT_CMD(cm);
}
}
}
#endif