freebsd-dev/sys/mips/conf/AR71XX_BASE.hints
Adrian Chadd 530028c9d6 Break out the AR71XX config file into _BASE and board specific
bits.

The ROUERSTATION and RSPRO variants contain:

* the board specific bits (eg the RTC for RSPRO, later on it'll
  include the GPIO/LED definitions);
* the boot specific bits (eg, on-board flash, usb flash, etc).

For now the AR71XX_BASE file contains the common board config,
drivers and net80211/ath wireless drivers.

I'll follow this up with config files for the other boards I
have (eg the Ubiquiti LSSR71, as well as some Mikrotik boards
that use the AR71XX and atheros reference boards) which will
be quite easy to do now.
2011-12-29 05:51:48 +00:00

67 lines
1.2 KiB
Plaintext

#
# $FreeBSD$
#
hint.apb.0.at="nexus0"
hint.apb.0.irq=4
# uart0
hint.uart.0.at="apb0"
# see atheros/uart_cpu_ar71xx.c why +3
hint.uart.0.maddr=0x18020003
hint.uart.0.msize=0x18
hint.uart.0.irq=3
#ohci
hint.ohci.0.at="apb0"
hint.ohci.0.maddr=0x1c000000
hint.ohci.0.msize=0x01000000
hint.ohci.0.irq=6
#ehci
hint.ehci.0.at="nexus0"
hint.ehci.0.maddr=0x1b000000
hint.ehci.0.msize=0x01000000
hint.ehci.0.irq=1
# pci
hint.pcib.0.at="nexus0"
hint.pcib.0.irq=0
hint.arge.0.at="nexus0"
hint.arge.0.maddr=0x19000000
hint.arge.0.msize=0x1000
hint.arge.0.irq=2
# phymask, media and fduplex depend upon the specific
# board.
# So each board will override the settings as needed.
hint.arge.1.at="nexus0"
hint.arge.1.maddr=0x1a000000
hint.arge.1.msize=0x1000
hint.arge.1.irq=3
# SPI flash
hint.spi.0.at="nexus0"
hint.spi.0.maddr=0x1f000000
hint.spi.0.msize=0x10
hint.mx25l.0.at="spibus0"
hint.mx25l.0.cs=0
# Watchdog
hint.ar71xx_wdog.0.at="nexus0"
# GPIO
hint.gpio.0.at="apb0"
hint.gpio.0.maddr=0x18040000
hint.gpio.0.msize=0x1000
hint.gpio.0.irq=2
# Each board should override the GPIO bus pins with the configuration
# relevant to it. Thus no pins are defined here.
# hwpmc device
hint.ar71xx_pmc.0.at="apb0"
hint.ar71xx_pmc.0.irq=5