Adrian Chadd de8e4d6436 Add a per-TID filter queue and filter state bits. ... These are intended for software TX filtering support, where the NIC decides there has been too many successive failues to a destination and will filter it. Although the filtering is done per-destination (via the keycache), the state and queue is kept per-TID for now. It simplifies the overall architecture design and locking. Whilst here, add ATH_TID_UNLOCK_ASSERT().		2012-09-17 01:21:55 +00:00
..
ath_dfs/null	Disable strong signal diversity when enabling radar pulse detection	2012-09-02 05:01:10 +00:00
ath_hal	Don't use AR_PHY_MODE to setup half/quarter rate.	2012-09-13 18:24:13 +00:00
ath_rate	Improve performance of the Sample rate algorithm on 802.11n networks.	2012-09-17 01:09:17 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	Flesh out a new DMA map for the EDMA TX completion status, as well	2012-07-23 02:49:25 +00:00
if_ath_beacon.c	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	Only print the descriptor contents!	2012-08-27 23:27:41 +00:00
if_ath_debug.h	Add a debug bit for TX destination filtering.	2012-09-17 01:18:47 +00:00
if_ath_keycache.c
if_ath_keycache.h
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h
if_ath_misc.h	Break out the TX completion code into a separate function, so it can be	2012-08-14 22:32:20 +00:00
if_ath_pci.c	Flesh out a new DMA map for the EDMA TX completion status, as well	2012-07-23 02:49:25 +00:00
if_ath_rx_edma.c	Remove - not needed.	2012-08-29 00:53:58 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	Remove extra debugging - there's no longer any need.	2012-08-29 00:53:41 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_sysctl.c	Dump out the TX FIFO depth.	2012-08-14 22:34:22 +00:00
if_ath_sysctl.h
if_ath_tdma.c
if_ath_tdma.h
if_ath_tsf.h
if_ath_tx_edma.c	Initialise an uninitialised variable.	2012-08-21 16:44:25 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Correctly mask out the RTS/CTS flags when forming aggregates.	2012-09-08 02:56:09 +00:00
if_ath_tx_ht.h
if_ath_tx.c	Clear the correct descriptor when going through the chained together	2012-09-11 04:11:42 +00:00
if_ath_tx.h	Revert the ath_tx_draintxq() method, and instead teach it the minimum	2012-08-12 00:46:15 +00:00
if_ath.c	Remove TDMA #define entries from if_ath.c; they now exist in if_ath_tdma.h.	2012-09-09 04:53:10 +00:00
if_athdfs.h	Change the ath_dfs_process_phy_err() method to take an mbuf rather than	2012-06-24 08:09:06 +00:00
if_athioctl.h	Placeholder ioctl for an upcoming rate control statistics API change.	2012-07-31 02:18:10 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Add a per-TID filter queue and filter state bits.	2012-09-17 01:21:55 +00:00