c61314601b
Logical volumes on these devices show up as LUNs behind another controller (also known as proxy controller). In order to issue firmware commands for a volume on a proxy controller, they must be targeted at the address of the proxy controller it is attached to, not the Host/PCI controller. A proxy controller is defined as a device listed in the INQUIRY PHYSICAL LUNS command who's L2 and L3 SCSI addresses are zero. The corresponding address returned defines which "bus" the controller lives on and we use this to create a virtual CAM bus. A logical volume's addresses first byte defines the logical drive number. The second byte defines the bus that it is attached to which corresponds to the BUS of the proxy controller's found or the Host/PCI controller. Change event notification to be handled in its own kernel thread. This is needed since some events may require the driver to sleep on some operations and this cannot be done during interrupt context. With this change, it is now possible to create and destroy logical volumes from FreeBSD, but it requires a native application to construct the proper firmware commands which is not publicly available. Special thanks to John Cagle @ HP for providing remote access to all the hardware and beating on the storage engineers at HP to answer my questions.
389 lines
13 KiB
C
389 lines
13 KiB
C
/*-
|
|
* Copyright (c) 2001 Michael Smith
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* CISS adapter driver datastructures
|
|
*/
|
|
|
|
/************************************************************************
|
|
* Tunable parameters
|
|
*/
|
|
|
|
/*
|
|
* There is no guaranteed upper bound on the number of concurrent
|
|
* commands an adapter may claim to support. Cap it at a reasonable
|
|
* value.
|
|
*/
|
|
#define CISS_MAX_REQUESTS 256
|
|
|
|
/*
|
|
* Maximum number of logical drives we support.
|
|
*/
|
|
#define CISS_MAX_LOGICAL 15
|
|
|
|
/*
|
|
* Maximum number of physical devices we support.
|
|
*/
|
|
#define CISS_MAX_PHYSICAL 1024
|
|
|
|
/*
|
|
* Interrupt reduction can be controlled by tuning the interrupt
|
|
* coalesce delay and count paramters. The delay (in microseconds)
|
|
* defers delivery of interrupts to increase the chance of there being
|
|
* more than one completed command ready when the interrupt is
|
|
* delivered. The count expedites the delivery of the interrupt when
|
|
* the given number of commands are ready.
|
|
*
|
|
* If the delay is set to 0, interrupts are delivered immediately.
|
|
*/
|
|
#define CISS_INTERRUPT_COALESCE_DELAY 1000
|
|
#define CISS_INTERRUPT_COALESCE_COUNT 16
|
|
|
|
/*
|
|
* Heartbeat routine timeout in seconds. Note that since event
|
|
* handling is performed on a callback basis, we don't need this to
|
|
* run very often.
|
|
*/
|
|
#define CISS_HEARTBEAT_RATE 10
|
|
|
|
/************************************************************************
|
|
* Compatibility with older versions of FreeBSD
|
|
*/
|
|
#if __FreeBSD_version < 440001
|
|
#warning testing old-FreeBSD compat
|
|
typedef struct proc d_thread_t;
|
|
#endif
|
|
|
|
/************************************************************************
|
|
* Command queue statistics
|
|
*/
|
|
|
|
#define CISSQ_FREE 0
|
|
#define CISSQ_BUSY 1
|
|
#define CISSQ_COMPLETE 2
|
|
#define CISSQ_NOTIFY 3
|
|
#define CISSQ_COUNT 4
|
|
|
|
struct ciss_qstat
|
|
{
|
|
u_int32_t q_length;
|
|
u_int32_t q_max;
|
|
};
|
|
|
|
/************************************************************************
|
|
* Driver version. Only really significant to the ACU interface.
|
|
*/
|
|
#define CISS_DRIVER_VERSION 20011201
|
|
|
|
/************************************************************************
|
|
* Driver data structures
|
|
*/
|
|
|
|
/*
|
|
* Each command issued to the adapter is managed by a request
|
|
* structure.
|
|
*/
|
|
struct ciss_request
|
|
{
|
|
TAILQ_ENTRY(ciss_request) cr_link;
|
|
int cr_onq; /* which queue we are on */
|
|
|
|
struct ciss_softc *cr_sc; /* controller softc */
|
|
void *cr_data; /* data buffer */
|
|
u_int32_t cr_length; /* data length */
|
|
bus_dmamap_t cr_datamap; /* DMA map for data */
|
|
int cr_tag;
|
|
int cr_flags;
|
|
#define CISS_REQ_MAPPED (1<<0) /* data mapped */
|
|
#define CISS_REQ_SLEEP (1<<1) /* submitter sleeping */
|
|
#define CISS_REQ_POLL (1<<2) /* submitter polling */
|
|
#define CISS_REQ_DATAOUT (1<<3) /* data host->adapter */
|
|
#define CISS_REQ_DATAIN (1<<4) /* data adapter->host */
|
|
|
|
void (* cr_complete)(struct ciss_request *);
|
|
void *cr_private;
|
|
};
|
|
|
|
/*
|
|
* The adapter command structure is defined with a zero-length
|
|
* scatter/gather list size. In practise, we want space for a
|
|
* scatter-gather list, and we also want to avoid having commands
|
|
* cross page boundaries.
|
|
*
|
|
* Note that 512 bytes yields 28 scatter/gather entries, or the
|
|
* ability to map (26 * PAGE_SIZE) + 2 bytes of data. On x86, this is
|
|
* 104kB. 256 bytes would only yield 12 entries, giving a mere 40kB,
|
|
* too small.
|
|
*/
|
|
|
|
#define CISS_COMMAND_ALLOC_SIZE 512 /* XXX tune to get sensible s/g list length */
|
|
#define CISS_COMMAND_SG_LENGTH ((CISS_COMMAND_ALLOC_SIZE - sizeof(struct ciss_command)) \
|
|
/ sizeof(struct ciss_sg_entry))
|
|
|
|
/*
|
|
* Per-logical-drive data.
|
|
*/
|
|
struct ciss_ldrive
|
|
{
|
|
union ciss_device_address cl_address;
|
|
union ciss_device_address *cl_controller;
|
|
int cl_status;
|
|
#define CISS_LD_NONEXISTENT 0
|
|
#define CISS_LD_ONLINE 1
|
|
#define CISS_LD_OFFLINE 2
|
|
|
|
int cl_update;
|
|
|
|
struct ciss_bmic_id_ldrive *cl_ldrive;
|
|
struct ciss_bmic_id_lstatus *cl_lstatus;
|
|
struct ciss_ldrive_geometry cl_geometry;
|
|
|
|
char cl_name[16]; /* device name */
|
|
};
|
|
|
|
/*
|
|
* Per-adapter data
|
|
*/
|
|
struct ciss_softc
|
|
{
|
|
/* bus connections */
|
|
device_t ciss_dev; /* bus attachment */
|
|
dev_t ciss_dev_t; /* control device */
|
|
|
|
struct resource *ciss_regs_resource; /* register interface window */
|
|
int ciss_regs_rid; /* resource ID */
|
|
bus_space_handle_t ciss_regs_bhandle; /* bus space handle */
|
|
bus_space_tag_t ciss_regs_btag; /* bus space tag */
|
|
|
|
struct resource *ciss_cfg_resource; /* config struct interface window */
|
|
int ciss_cfg_rid; /* resource ID */
|
|
struct ciss_config_table *ciss_cfg; /* config table in adapter memory */
|
|
struct ciss_bmic_id_table *ciss_id; /* ID table in host memory */
|
|
u_int32_t ciss_heartbeat; /* last heartbeat value */
|
|
int ciss_heart_attack; /* number of times we have seen this value */
|
|
|
|
struct resource *ciss_irq_resource; /* interrupt */
|
|
int ciss_irq_rid; /* resource ID */
|
|
void *ciss_intr; /* interrupt handle */
|
|
|
|
bus_dma_tag_t ciss_parent_dmat; /* parent DMA tag */
|
|
bus_dma_tag_t ciss_buffer_dmat; /* data buffer/command DMA tag */
|
|
|
|
u_int32_t ciss_interrupt_mask; /* controller interrupt mask bits */
|
|
|
|
int ciss_max_requests;
|
|
struct ciss_request ciss_request[CISS_MAX_REQUESTS]; /* requests */
|
|
void *ciss_command; /* command structures */
|
|
bus_dma_tag_t ciss_command_dmat; /* command DMA tag */
|
|
bus_dmamap_t ciss_command_map; /* command DMA map */
|
|
u_int32_t ciss_command_phys; /* command array base address */
|
|
TAILQ_HEAD(,ciss_request) ciss_free; /* requests available for reuse */
|
|
TAILQ_HEAD(,ciss_request) ciss_busy; /* requests in the adapter */
|
|
TAILQ_HEAD(,ciss_request) ciss_complete; /* requests which have been returned by the adapter */
|
|
TAILQ_HEAD(,ciss_request) ciss_notify; /* requests which are defered for processing */
|
|
struct proc *ciss_notify_thread;
|
|
|
|
struct callout_handle ciss_periodic; /* periodic event handling */
|
|
struct ciss_request *ciss_periodic_notify; /* notify callback request */
|
|
|
|
struct ciss_ldrive **ciss_logical;
|
|
union ciss_device_address *ciss_controllers; /* controller address */
|
|
int ciss_max_bus_number; /* maximum bus number */
|
|
|
|
struct cam_devq *ciss_cam_devq;
|
|
struct cam_sim **ciss_cam_sim;
|
|
|
|
int ciss_flags;
|
|
#define CISS_FLAG_NOTIFY_OK (1<<0) /* notify command running OK */
|
|
#define CISS_FLAG_CONTROL_OPEN (1<<1) /* control device is open */
|
|
#define CISS_FLAG_ABORTING (1<<2) /* driver is going away */
|
|
#define CISS_FLAG_RUNNING (1<<3) /* driver is running (interrupts usable) */
|
|
|
|
#define CISS_FLAG_FAKE_SYNCH (1<<16) /* needs SYNCHRONISE_CACHE faked */
|
|
#define CISS_FLAG_BMIC_ABORT (1<<17) /* use BMIC command to abort Notify on Event */
|
|
#define CISS_FLAG_THREAD_SHUT (1<<20) /* shutdown the kthread */
|
|
|
|
struct ciss_qstat ciss_qstat[CISSQ_COUNT]; /* queue statistics */
|
|
};
|
|
|
|
/*
|
|
* Given a request tag, find the corresponding command in virtual or
|
|
* physical space.
|
|
*
|
|
* The arithmetic here is due to the allocation of ciss_command structures
|
|
* inside CISS_COMMAND_ALLOC_SIZE blocks. See the comment at the definition
|
|
* of CISS_COMMAND_ALLOC_SIZE above.
|
|
*/
|
|
#define CISS_FIND_COMMAND(cr) \
|
|
(struct ciss_command *)((u_int8_t *)(cr)->cr_sc->ciss_command + \
|
|
((cr)->cr_tag * CISS_COMMAND_ALLOC_SIZE))
|
|
#define CISS_FIND_COMMANDPHYS(cr) ((cr)->cr_sc->ciss_command_phys + \
|
|
((cr)->cr_tag * CISS_COMMAND_ALLOC_SIZE))
|
|
|
|
/************************************************************************
|
|
* Debugging/diagnostic output.
|
|
*/
|
|
|
|
/*
|
|
* Debugging levels:
|
|
* 0 - quiet, only emit warnings
|
|
* 1 - talkative, log major events, but nothing on the I/O path
|
|
* 2 - noisy, log events on the I/O path
|
|
* 3 - extremely noisy, log items in loops
|
|
*/
|
|
#ifdef CISS_DEBUG
|
|
# define debug(level, fmt, args...) \
|
|
do { \
|
|
if (level <= CISS_DEBUG) printf("%s: " fmt "\n", __func__ , ##args); \
|
|
} while(0)
|
|
# define debug_called(level) \
|
|
do { \
|
|
if (level <= CISS_DEBUG) printf("%s: called\n", __func__); \
|
|
} while(0)
|
|
# define debug_struct(s) printf(" SIZE %s: %zu\n", #s, sizeof(struct s))
|
|
# define debug_union(s) printf(" SIZE %s: %zu\n", #s, sizeof(union s))
|
|
# define debug_type(s) printf(" SIZE %s: %zu\n", #s, sizeof(s))
|
|
# define debug_field(s, f) printf(" OFFSET %s.%s: %d\n", #s, #f, ((int)&(((struct s *)0)->f)))
|
|
# define debug_const(c) printf(" CONST %s %jd/0x%jx\n", #c, (intmax_t)c, (intmax_t)c);
|
|
#else
|
|
# define debug(level, fmt, args...)
|
|
# define debug_called(level)
|
|
# define debug_struct(s)
|
|
# define debug_union(s)
|
|
# define debug_type(s)
|
|
# define debug_field(s, f)
|
|
# define debug_const(c)
|
|
#endif
|
|
|
|
#define ciss_printf(sc, fmt, args...) device_printf(sc->ciss_dev, fmt , ##args)
|
|
|
|
/************************************************************************
|
|
* Queue primitives
|
|
*/
|
|
|
|
#define CISSQ_ADD(sc, qname) \
|
|
do { \
|
|
struct ciss_qstat *qs = &(sc)->ciss_qstat[qname]; \
|
|
\
|
|
qs->q_length++; \
|
|
if (qs->q_length > qs->q_max) \
|
|
qs->q_max = qs->q_length; \
|
|
} while(0)
|
|
|
|
#define CISSQ_REMOVE(sc, qname) (sc)->ciss_qstat[qname].q_length--
|
|
#define CISSQ_INIT(sc, qname) \
|
|
do { \
|
|
sc->ciss_qstat[qname].q_length = 0; \
|
|
sc->ciss_qstat[qname].q_max = 0; \
|
|
} while(0)
|
|
|
|
|
|
#define CISSQ_REQUEST_QUEUE(name, index) \
|
|
static __inline void \
|
|
ciss_initq_ ## name (struct ciss_softc *sc) \
|
|
{ \
|
|
TAILQ_INIT(&sc->ciss_ ## name); \
|
|
CISSQ_INIT(sc, index); \
|
|
} \
|
|
static __inline void \
|
|
ciss_enqueue_ ## name (struct ciss_request *cr) \
|
|
{ \
|
|
int s; \
|
|
\
|
|
s = splcam(); \
|
|
TAILQ_INSERT_TAIL(&cr->cr_sc->ciss_ ## name, cr, cr_link); \
|
|
CISSQ_ADD(cr->cr_sc, index); \
|
|
cr->cr_onq = index; \
|
|
splx(s); \
|
|
} \
|
|
static __inline void \
|
|
ciss_requeue_ ## name (struct ciss_request *cr) \
|
|
{ \
|
|
int s; \
|
|
\
|
|
s = splcam(); \
|
|
TAILQ_INSERT_HEAD(&cr->cr_sc->ciss_ ## name, cr, cr_link); \
|
|
CISSQ_ADD(cr->cr_sc, index); \
|
|
cr->cr_onq = index; \
|
|
splx(s); \
|
|
} \
|
|
static __inline struct ciss_request * \
|
|
ciss_dequeue_ ## name (struct ciss_softc *sc) \
|
|
{ \
|
|
struct ciss_request *cr; \
|
|
int s; \
|
|
\
|
|
s = splcam(); \
|
|
if ((cr = TAILQ_FIRST(&sc->ciss_ ## name)) != NULL) { \
|
|
TAILQ_REMOVE(&sc->ciss_ ## name, cr, cr_link); \
|
|
CISSQ_REMOVE(sc, index); \
|
|
cr->cr_onq = -1; \
|
|
} \
|
|
splx(s); \
|
|
return(cr); \
|
|
} \
|
|
static __inline int \
|
|
ciss_remove_ ## name (struct ciss_request *cr) \
|
|
{ \
|
|
int s, error; \
|
|
\
|
|
s = splcam(); \
|
|
if (cr->cr_onq != index) { \
|
|
printf("request on queue %d (expected %d)\n", cr->cr_onq, index);\
|
|
error = 1; \
|
|
} else { \
|
|
TAILQ_REMOVE(&cr->cr_sc->ciss_ ## name, cr, cr_link); \
|
|
CISSQ_REMOVE(cr->cr_sc, index); \
|
|
cr->cr_onq = -1; \
|
|
error = 0; \
|
|
} \
|
|
splx(s); \
|
|
return(error); \
|
|
} \
|
|
struct hack
|
|
|
|
CISSQ_REQUEST_QUEUE(free, CISSQ_FREE);
|
|
CISSQ_REQUEST_QUEUE(busy, CISSQ_BUSY);
|
|
CISSQ_REQUEST_QUEUE(complete, CISSQ_COMPLETE);
|
|
CISSQ_REQUEST_QUEUE(notify, CISSQ_NOTIFY);
|
|
|
|
/********************************************************************************
|
|
* space-fill a character string
|
|
*/
|
|
static __inline void
|
|
padstr(char *targ, const char *src, int len)
|
|
{
|
|
while (len-- > 0) {
|
|
if (*src != 0) {
|
|
*targ++ = *src++;
|
|
} else {
|
|
*targ++ = ' ';
|
|
}
|
|
}
|
|
}
|