6fca90a0f9
doing bus_dmamap_sync() since it operates on the former, not the latter. Reviewed by: davidch
10222 lines
325 KiB
C
10222 lines
325 KiB
C
/*-
|
|
* Copyright (c) 2006-2008 Broadcom Corporation
|
|
* David Christensen <davidch@broadcom.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of Broadcom Corporation nor the name of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written consent.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* The following controllers are supported by this driver:
|
|
* BCM5706C A2, A3
|
|
* BCM5706S A2, A3
|
|
* BCM5708C B1, B2
|
|
* BCM5708S B1, B2
|
|
* BCM5709C A1, C0
|
|
* BCM5716 C0
|
|
*
|
|
* The following controllers are not supported by this driver:
|
|
* BCM5706C A0, A1 (pre-production)
|
|
* BCM5706S A0, A1 (pre-production)
|
|
* BCM5708C A0, B0 (pre-production)
|
|
* BCM5708S A0, B0 (pre-production)
|
|
* BCM5709C A0 B0, B1, B2 (pre-production)
|
|
* BCM5709S A0, A1, B0, B1, B2, C0 (pre-production)
|
|
*/
|
|
|
|
#include "opt_bce.h"
|
|
|
|
#include <dev/bce/if_bcereg.h>
|
|
#include <dev/bce/if_bcefw.h>
|
|
|
|
/****************************************************************************/
|
|
/* BCE Debug Options */
|
|
/****************************************************************************/
|
|
#ifdef BCE_DEBUG
|
|
u32 bce_debug = BCE_WARN;
|
|
|
|
/* 0 = Never */
|
|
/* 1 = 1 in 2,147,483,648 */
|
|
/* 256 = 1 in 8,388,608 */
|
|
/* 2048 = 1 in 1,048,576 */
|
|
/* 65536 = 1 in 32,768 */
|
|
/* 1048576 = 1 in 2,048 */
|
|
/* 268435456 = 1 in 8 */
|
|
/* 536870912 = 1 in 4 */
|
|
/* 1073741824 = 1 in 2 */
|
|
|
|
/* Controls how often the l2_fhdr frame error check will fail. */
|
|
int bce_debug_l2fhdr_status_check = 0;
|
|
|
|
/* Controls how often the unexpected attention check will fail. */
|
|
int bce_debug_unexpected_attention = 0;
|
|
|
|
/* Controls how often to simulate an mbuf allocation failure. */
|
|
int bce_debug_mbuf_allocation_failure = 0;
|
|
|
|
/* Controls how often to simulate a DMA mapping failure. */
|
|
int bce_debug_dma_map_addr_failure = 0;
|
|
|
|
/* Controls how often to simulate a bootcode failure. */
|
|
int bce_debug_bootcode_running_failure = 0;
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* BCE Build Time Options */
|
|
/****************************************************************************/
|
|
#define BCE_USE_SPLIT_HEADER 1
|
|
/* #define BCE_NVRAM_WRITE_SUPPORT 1 */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PCI Device ID Table */
|
|
/* */
|
|
/* Used by bce_probe() to identify the devices supported by this driver. */
|
|
/****************************************************************************/
|
|
#define BCE_DEVDESC_MAX 64
|
|
|
|
static struct bce_type bce_devs[] = {
|
|
/* BCM5706C Controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x3101,
|
|
"HP NC370T Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, HP_VENDORID, 0x3106,
|
|
"HP NC370i Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5706 1000Base-T" },
|
|
|
|
/* BCM5706S controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706S, HP_VENDORID, 0x3102,
|
|
"HP NC370F Multifunction Gigabit Server Adapter" },
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5706S, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5706 1000Base-SX" },
|
|
|
|
/* BCM5708C controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5708 1000Base-T" },
|
|
|
|
/* BCM5708S controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5708S, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5708 1000Base-SX" },
|
|
|
|
/* BCM5709C controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5709, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5709 1000Base-T" },
|
|
|
|
/* BCM5709S controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5709S, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5709 1000Base-SX" },
|
|
|
|
/* BCM5716 controllers and OEM boards. */
|
|
{ BRCM_VENDORID, BRCM_DEVICEID_BCM5716, PCI_ANY_ID, PCI_ANY_ID,
|
|
"Broadcom NetXtreme II BCM5716 1000Base-T" },
|
|
|
|
{ 0, 0, 0, 0, NULL }
|
|
};
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Supported Flash NVRAM device data. */
|
|
/****************************************************************************/
|
|
static struct flash_spec flash_table[] =
|
|
{
|
|
#define BUFFERED_FLAGS (BCE_NV_BUFFERED | BCE_NV_TRANSLATE)
|
|
#define NONBUFFERED_FLAGS (BCE_NV_WREN)
|
|
|
|
/* Slow EEPROM */
|
|
{0x00000000, 0x40830380, 0x009f0081, 0xa184a053, 0xaf000400,
|
|
BUFFERED_FLAGS, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
|
|
SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
|
|
"EEPROM - slow"},
|
|
/* Expansion entry 0001 */
|
|
{0x08000002, 0x4b808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 0001"},
|
|
/* Saifun SA25F010 (non-buffered flash) */
|
|
/* strap, cfg1, & write1 need updates */
|
|
{0x04000001, 0x47808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2,
|
|
"Non-buffered flash (128kB)"},
|
|
/* Saifun SA25F020 (non-buffered flash) */
|
|
/* strap, cfg1, & write1 need updates */
|
|
{0x0c000003, 0x4f808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4,
|
|
"Non-buffered flash (256kB)"},
|
|
/* Expansion entry 0100 */
|
|
{0x11000000, 0x53808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 0100"},
|
|
/* Entry 0101: ST M45PE10 (non-buffered flash, TetonII B0) */
|
|
{0x19000002, 0x5b808201, 0x000500db, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE,
|
|
ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*2,
|
|
"Entry 0101: ST M45PE10 (128kB non-bufferred)"},
|
|
/* Entry 0110: ST M45PE20 (non-buffered flash)*/
|
|
{0x15000001, 0x57808201, 0x000500db, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, ST_MICRO_FLASH_PAGE_BITS, ST_MICRO_FLASH_PAGE_SIZE,
|
|
ST_MICRO_FLASH_BYTE_ADDR_MASK, ST_MICRO_FLASH_BASE_TOTAL_SIZE*4,
|
|
"Entry 0110: ST M45PE20 (256kB non-bufferred)"},
|
|
/* Saifun SA25F005 (non-buffered flash) */
|
|
/* strap, cfg1, & write1 need updates */
|
|
{0x1d000003, 0x5f808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE,
|
|
"Non-buffered flash (64kB)"},
|
|
/* Fast EEPROM */
|
|
{0x22000000, 0x62808380, 0x009f0081, 0xa184a053, 0xaf000400,
|
|
BUFFERED_FLAGS, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE,
|
|
SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE,
|
|
"EEPROM - fast"},
|
|
/* Expansion entry 1001 */
|
|
{0x2a000002, 0x6b808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1001"},
|
|
/* Expansion entry 1010 */
|
|
{0x26000001, 0x67808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1010"},
|
|
/* ATMEL AT45DB011B (buffered flash) */
|
|
{0x2e000003, 0x6e808273, 0x00570081, 0x68848353, 0xaf000400,
|
|
BUFFERED_FLAGS, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
|
|
BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE,
|
|
"Buffered flash (128kB)"},
|
|
/* Expansion entry 1100 */
|
|
{0x33000000, 0x73808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1100"},
|
|
/* Expansion entry 1101 */
|
|
{0x3b000002, 0x7b808201, 0x00050081, 0x03840253, 0xaf020406,
|
|
NONBUFFERED_FLAGS, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE,
|
|
SAIFUN_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1101"},
|
|
/* Ateml Expansion entry 1110 */
|
|
{0x37000001, 0x76808273, 0x00570081, 0x68848353, 0xaf000400,
|
|
BUFFERED_FLAGS, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
|
|
BUFFERED_FLASH_BYTE_ADDR_MASK, 0,
|
|
"Entry 1110 (Atmel)"},
|
|
/* ATMEL AT45DB021B (buffered flash) */
|
|
{0x3f000003, 0x7e808273, 0x00570081, 0x68848353, 0xaf000400,
|
|
BUFFERED_FLAGS, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE,
|
|
BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE*2,
|
|
"Buffered flash (256kB)"},
|
|
};
|
|
|
|
/*
|
|
* The BCM5709 controllers transparently handle the
|
|
* differences between Atmel 264 byte pages and all
|
|
* flash devices which use 256 byte pages, so no
|
|
* logical-to-physical mapping is required in the
|
|
* driver.
|
|
*/
|
|
static struct flash_spec flash_5709 = {
|
|
.flags = BCE_NV_BUFFERED,
|
|
.page_bits = BCM5709_FLASH_PAGE_BITS,
|
|
.page_size = BCM5709_FLASH_PAGE_SIZE,
|
|
.addr_mask = BCM5709_FLASH_BYTE_ADDR_MASK,
|
|
.total_size = BUFFERED_FLASH_TOTAL_SIZE * 2,
|
|
.name = "5709/5716 buffered flash (256kB)",
|
|
};
|
|
|
|
|
|
/****************************************************************************/
|
|
/* FreeBSD device entry points. */
|
|
/****************************************************************************/
|
|
static int bce_probe (device_t);
|
|
static int bce_attach (device_t);
|
|
static int bce_detach (device_t);
|
|
static int bce_shutdown (device_t);
|
|
|
|
|
|
/****************************************************************************/
|
|
/* BCE Debug Data Structure Dump Routines */
|
|
/****************************************************************************/
|
|
#ifdef BCE_DEBUG
|
|
static u32 bce_reg_rd (struct bce_softc *, u32);
|
|
static void bce_reg_wr (struct bce_softc *, u32, u32);
|
|
static void bce_reg_wr16 (struct bce_softc *, u32, u16);
|
|
static u32 bce_ctx_rd (struct bce_softc *, u32, u32);
|
|
static void bce_dump_enet (struct bce_softc *, struct mbuf *);
|
|
static void bce_dump_mbuf (struct bce_softc *, struct mbuf *);
|
|
static void bce_dump_tx_mbuf_chain (struct bce_softc *, u16, int);
|
|
static void bce_dump_rx_mbuf_chain (struct bce_softc *, u16, int);
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
static void bce_dump_pg_mbuf_chain (struct bce_softc *, u16, int);
|
|
#endif
|
|
static void bce_dump_txbd (struct bce_softc *, int, struct tx_bd *);
|
|
static void bce_dump_rxbd (struct bce_softc *, int, struct rx_bd *);
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
static void bce_dump_pgbd (struct bce_softc *, int, struct rx_bd *);
|
|
#endif
|
|
static void bce_dump_l2fhdr (struct bce_softc *, int, struct l2_fhdr *);
|
|
static void bce_dump_ctx (struct bce_softc *, u16);
|
|
static void bce_dump_ftqs (struct bce_softc *);
|
|
static void bce_dump_tx_chain (struct bce_softc *, u16, int);
|
|
static void bce_dump_rx_chain (struct bce_softc *, u16, int);
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
static void bce_dump_pg_chain (struct bce_softc *, u16, int);
|
|
#endif
|
|
static void bce_dump_status_block (struct bce_softc *);
|
|
static void bce_dump_stats_block (struct bce_softc *);
|
|
static void bce_dump_driver_state (struct bce_softc *);
|
|
static void bce_dump_hw_state (struct bce_softc *);
|
|
static void bce_dump_mq_regs (struct bce_softc *);
|
|
static void bce_dump_bc_state (struct bce_softc *);
|
|
static void bce_dump_txp_state (struct bce_softc *, int);
|
|
static void bce_dump_rxp_state (struct bce_softc *, int);
|
|
static void bce_dump_tpat_state (struct bce_softc *, int);
|
|
static void bce_dump_cp_state (struct bce_softc *, int);
|
|
static void bce_dump_com_state (struct bce_softc *, int);
|
|
static void bce_breakpoint (struct bce_softc *);
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* BCE Register/Memory Access Routines */
|
|
/****************************************************************************/
|
|
static u32 bce_reg_rd_ind (struct bce_softc *, u32);
|
|
static void bce_reg_wr_ind (struct bce_softc *, u32, u32);
|
|
static void bce_ctx_wr (struct bce_softc *, u32, u32, u32);
|
|
static int bce_miibus_read_reg (device_t, int, int);
|
|
static int bce_miibus_write_reg (device_t, int, int, int);
|
|
static void bce_miibus_statchg (device_t);
|
|
|
|
|
|
/****************************************************************************/
|
|
/* BCE NVRAM Access Routines */
|
|
/****************************************************************************/
|
|
static int bce_acquire_nvram_lock (struct bce_softc *);
|
|
static int bce_release_nvram_lock (struct bce_softc *);
|
|
static void bce_enable_nvram_access (struct bce_softc *);
|
|
static void bce_disable_nvram_access(struct bce_softc *);
|
|
static int bce_nvram_read_dword (struct bce_softc *, u32, u8 *, u32);
|
|
static int bce_init_nvram (struct bce_softc *);
|
|
static int bce_nvram_read (struct bce_softc *, u32, u8 *, int);
|
|
static int bce_nvram_test (struct bce_softc *);
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
static int bce_enable_nvram_write (struct bce_softc *);
|
|
static void bce_disable_nvram_write (struct bce_softc *);
|
|
static int bce_nvram_erase_page (struct bce_softc *, u32);
|
|
static int bce_nvram_write_dword (struct bce_softc *, u32, u8 *, u32);
|
|
static int bce_nvram_write (struct bce_softc *, u32, u8 *, int);
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* */
|
|
/****************************************************************************/
|
|
static void bce_get_media (struct bce_softc *);
|
|
static void bce_dma_map_addr (void *, bus_dma_segment_t *, int, int);
|
|
static int bce_dma_alloc (device_t);
|
|
static void bce_dma_free (struct bce_softc *);
|
|
static void bce_release_resources (struct bce_softc *);
|
|
|
|
/****************************************************************************/
|
|
/* BCE Firmware Synchronization and Load */
|
|
/****************************************************************************/
|
|
static int bce_fw_sync (struct bce_softc *, u32);
|
|
static void bce_load_rv2p_fw (struct bce_softc *, u32 *, u32, u32);
|
|
static void bce_load_cpu_fw (struct bce_softc *, struct cpu_reg *, struct fw_info *);
|
|
static void bce_init_rxp_cpu (struct bce_softc *);
|
|
static void bce_init_txp_cpu (struct bce_softc *);
|
|
static void bce_init_tpat_cpu (struct bce_softc *);
|
|
static void bce_init_cp_cpu (struct bce_softc *);
|
|
static void bce_init_com_cpu (struct bce_softc *);
|
|
static void bce_init_cpus (struct bce_softc *);
|
|
|
|
static void bce_print_adapter_info (struct bce_softc *);
|
|
static void bce_probe_pci_caps (device_t, struct bce_softc *);
|
|
static void bce_stop (struct bce_softc *);
|
|
static int bce_reset (struct bce_softc *, u32);
|
|
static int bce_chipinit (struct bce_softc *);
|
|
static int bce_blockinit (struct bce_softc *);
|
|
|
|
static int bce_init_tx_chain (struct bce_softc *);
|
|
static void bce_free_tx_chain (struct bce_softc *);
|
|
|
|
static int bce_get_rx_buf (struct bce_softc *, struct mbuf *, u16 *, u16 *, u32 *);
|
|
static int bce_init_rx_chain (struct bce_softc *);
|
|
static void bce_fill_rx_chain (struct bce_softc *);
|
|
static void bce_free_rx_chain (struct bce_softc *);
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
static int bce_get_pg_buf (struct bce_softc *, struct mbuf *, u16 *, u16 *);
|
|
static int bce_init_pg_chain (struct bce_softc *);
|
|
static void bce_fill_pg_chain (struct bce_softc *);
|
|
static void bce_free_pg_chain (struct bce_softc *);
|
|
#endif
|
|
|
|
static int bce_tx_encap (struct bce_softc *, struct mbuf **);
|
|
static void bce_start_locked (struct ifnet *);
|
|
static void bce_start (struct ifnet *);
|
|
static int bce_ioctl (struct ifnet *, u_long, caddr_t);
|
|
static void bce_watchdog (struct bce_softc *);
|
|
static int bce_ifmedia_upd (struct ifnet *);
|
|
static void bce_ifmedia_upd_locked (struct ifnet *);
|
|
static void bce_ifmedia_sts (struct ifnet *, struct ifmediareq *);
|
|
static void bce_init_locked (struct bce_softc *);
|
|
static void bce_init (void *);
|
|
static void bce_mgmt_init_locked (struct bce_softc *sc);
|
|
|
|
static void bce_init_ctx (struct bce_softc *);
|
|
static void bce_get_mac_addr (struct bce_softc *);
|
|
static void bce_set_mac_addr (struct bce_softc *);
|
|
static void bce_phy_intr (struct bce_softc *);
|
|
static inline u16 bce_get_hw_rx_cons(struct bce_softc *);
|
|
static void bce_rx_intr (struct bce_softc *);
|
|
static void bce_tx_intr (struct bce_softc *);
|
|
static void bce_disable_intr (struct bce_softc *);
|
|
static void bce_enable_intr (struct bce_softc *, int);
|
|
|
|
static void bce_intr (void *);
|
|
static void bce_set_rx_mode (struct bce_softc *);
|
|
static void bce_stats_update (struct bce_softc *);
|
|
static void bce_tick (void *);
|
|
static void bce_pulse (void *);
|
|
static void bce_add_sysctls (struct bce_softc *);
|
|
|
|
|
|
/****************************************************************************/
|
|
/* FreeBSD device dispatch table. */
|
|
/****************************************************************************/
|
|
static device_method_t bce_methods[] = {
|
|
/* Device interface (device_if.h) */
|
|
DEVMETHOD(device_probe, bce_probe),
|
|
DEVMETHOD(device_attach, bce_attach),
|
|
DEVMETHOD(device_detach, bce_detach),
|
|
DEVMETHOD(device_shutdown, bce_shutdown),
|
|
/* Supported by device interface but not used here. */
|
|
/* DEVMETHOD(device_identify, bce_identify), */
|
|
/* DEVMETHOD(device_suspend, bce_suspend), */
|
|
/* DEVMETHOD(device_resume, bce_resume), */
|
|
/* DEVMETHOD(device_quiesce, bce_quiesce), */
|
|
|
|
/* Bus interface (bus_if.h) */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
|
|
/* MII interface (miibus_if.h) */
|
|
DEVMETHOD(miibus_readreg, bce_miibus_read_reg),
|
|
DEVMETHOD(miibus_writereg, bce_miibus_write_reg),
|
|
DEVMETHOD(miibus_statchg, bce_miibus_statchg),
|
|
/* Supported by MII interface but not used here. */
|
|
/* DEVMETHOD(miibus_linkchg, bce_miibus_linkchg), */
|
|
/* DEVMETHOD(miibus_mediainit, bce_miibus_mediainit), */
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t bce_driver = {
|
|
"bce",
|
|
bce_methods,
|
|
sizeof(struct bce_softc)
|
|
};
|
|
|
|
static devclass_t bce_devclass;
|
|
|
|
MODULE_DEPEND(bce, pci, 1, 1, 1);
|
|
MODULE_DEPEND(bce, ether, 1, 1, 1);
|
|
MODULE_DEPEND(bce, miibus, 1, 1, 1);
|
|
|
|
DRIVER_MODULE(bce, pci, bce_driver, bce_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, bce, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Tunable device values */
|
|
/****************************************************************************/
|
|
SYSCTL_NODE(_hw, OID_AUTO, bce, CTLFLAG_RD, 0, "bce driver parameters");
|
|
|
|
/* Allowable values are TRUE or FALSE */
|
|
static int bce_tso_enable = TRUE;
|
|
TUNABLE_INT("hw.bce.tso_enable", &bce_tso_enable);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, tso_enable, CTLFLAG_RDTUN, &bce_tso_enable, 0,
|
|
"TSO Enable/Disable");
|
|
|
|
/* Allowable values are 0 (IRQ), 1 (MSI/IRQ), and 2 (MSI-X/MSI/IRQ) */
|
|
/* ToDo: Add MSI-X support. */
|
|
static int bce_msi_enable = 1;
|
|
TUNABLE_INT("hw.bce.msi_enable", &bce_msi_enable);
|
|
SYSCTL_UINT(_hw_bce, OID_AUTO, msi_enable, CTLFLAG_RDTUN, &bce_msi_enable, 0,
|
|
"MSI-X|MSI|INTx selector");
|
|
|
|
/* ToDo: Add tunable to enable/disable strict MTU handling. */
|
|
/* Currently allows "loose" RX MTU checking (i.e. sets the */
|
|
/* H/W RX MTU to the size of the largest receive buffer, or */
|
|
/* 2048 bytes). */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Device probe function. */
|
|
/* */
|
|
/* Compares the device to the driver's list of supported devices and */
|
|
/* reports back to the OS whether this is the right driver for the device. */
|
|
/* */
|
|
/* Returns: */
|
|
/* BUS_PROBE_DEFAULT on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_probe(device_t dev)
|
|
{
|
|
struct bce_type *t;
|
|
struct bce_softc *sc;
|
|
char *descbuf;
|
|
u16 vid = 0, did = 0, svid = 0, sdid = 0;
|
|
|
|
t = bce_devs;
|
|
|
|
sc = device_get_softc(dev);
|
|
bzero(sc, sizeof(struct bce_softc));
|
|
sc->bce_unit = device_get_unit(dev);
|
|
sc->bce_dev = dev;
|
|
|
|
/* Get the data for the device to be probed. */
|
|
vid = pci_get_vendor(dev);
|
|
did = pci_get_device(dev);
|
|
svid = pci_get_subvendor(dev);
|
|
sdid = pci_get_subdevice(dev);
|
|
|
|
DBPRINT(sc, BCE_EXTREME_LOAD,
|
|
"%s(); VID = 0x%04X, DID = 0x%04X, SVID = 0x%04X, "
|
|
"SDID = 0x%04X\n", __FUNCTION__, vid, did, svid, sdid);
|
|
|
|
/* Look through the list of known devices for a match. */
|
|
while(t->bce_name != NULL) {
|
|
|
|
if ((vid == t->bce_vid) && (did == t->bce_did) &&
|
|
((svid == t->bce_svid) || (t->bce_svid == PCI_ANY_ID)) &&
|
|
((sdid == t->bce_sdid) || (t->bce_sdid == PCI_ANY_ID))) {
|
|
|
|
descbuf = malloc(BCE_DEVDESC_MAX, M_TEMP, M_NOWAIT);
|
|
|
|
if (descbuf == NULL)
|
|
return(ENOMEM);
|
|
|
|
/* Print out the device identity. */
|
|
snprintf(descbuf, BCE_DEVDESC_MAX, "%s (%c%d)",
|
|
t->bce_name,
|
|
(((pci_read_config(dev, PCIR_REVID, 4) & 0xf0) >> 4) + 'A'),
|
|
(pci_read_config(dev, PCIR_REVID, 4) & 0xf));
|
|
|
|
device_set_desc_copy(dev, descbuf);
|
|
free(descbuf, M_TEMP);
|
|
return(BUS_PROBE_DEFAULT);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return(ENXIO);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PCI Capabilities Probe Function. */
|
|
/* */
|
|
/* Walks the PCI capabiites list for the device to find what features are */
|
|
/* supported. */
|
|
/* */
|
|
/* Returns: */
|
|
/* None. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_print_adapter_info(struct bce_softc *sc)
|
|
{
|
|
DBENTER(BCE_VERBOSE_LOAD);
|
|
|
|
BCE_PRINTF("ASIC (0x%08X); ", sc->bce_chipid);
|
|
printf("Rev (%c%d); ", ((BCE_CHIP_ID(sc) & 0xf000) >> 12) + 'A',
|
|
((BCE_CHIP_ID(sc) & 0x0ff0) >> 4));
|
|
|
|
/* Bus info. */
|
|
if (sc->bce_flags & BCE_PCIE_FLAG) {
|
|
printf("Bus (PCIe x%d, ", sc->link_width);
|
|
switch (sc->link_speed) {
|
|
case 1: printf("2.5Gbps); "); break;
|
|
case 2: printf("5Gbps); "); break;
|
|
default: printf("Unknown link speed); ");
|
|
}
|
|
} else {
|
|
printf("Bus (PCI%s, %s, %dMHz); ",
|
|
((sc->bce_flags & BCE_PCIX_FLAG) ? "-X" : ""),
|
|
((sc->bce_flags & BCE_PCI_32BIT_FLAG) ? "32-bit" : "64-bit"),
|
|
sc->bus_speed_mhz);
|
|
}
|
|
|
|
/* Firmware version and device features. */
|
|
printf("F/W (0x%08X); Flags( ", sc->bce_fw_ver);
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
printf("SPLT ");
|
|
#endif
|
|
if (sc->bce_flags & BCE_MFW_ENABLE_FLAG)
|
|
printf("MFW ");
|
|
if (sc->bce_flags & BCE_USING_MSI_FLAG)
|
|
printf("MSI ");
|
|
if (sc->bce_flags & BCE_USING_MSIX_FLAG)
|
|
printf("MSI-X ");
|
|
if (sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)
|
|
printf("2.5G ");
|
|
printf(")\n");
|
|
|
|
DBEXIT(BCE_VERBOSE_LOAD);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PCI Capabilities Probe Function. */
|
|
/* */
|
|
/* Walks the PCI capabiites list for the device to find what features are */
|
|
/* supported. */
|
|
/* */
|
|
/* Returns: */
|
|
/* None. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_probe_pci_caps(device_t dev, struct bce_softc *sc)
|
|
{
|
|
u32 reg;
|
|
|
|
DBENTER(BCE_VERBOSE_LOAD);
|
|
|
|
/* Check if PCI-X capability is enabled. */
|
|
if (pci_find_extcap(dev, PCIY_PCIX, ®) == 0) {
|
|
if (reg != 0)
|
|
sc->bce_cap_flags |= BCE_PCIX_CAPABLE_FLAG;
|
|
}
|
|
|
|
/* Check if PCIe capability is enabled. */
|
|
if (pci_find_extcap(dev, PCIY_EXPRESS, ®) == 0) {
|
|
if (reg != 0) {
|
|
u16 link_status = pci_read_config(dev, reg + 0x12, 2);
|
|
DBPRINT(sc, BCE_INFO_LOAD, "PCIe link_status = 0x%08X\n",
|
|
link_status);
|
|
sc->link_speed = link_status & 0xf;
|
|
sc->link_width = (link_status >> 4) & 0x3f;
|
|
sc->bce_cap_flags |= BCE_PCIE_CAPABLE_FLAG;
|
|
sc->bce_flags |= BCE_PCIE_FLAG;
|
|
}
|
|
}
|
|
|
|
/* Check if MSI capability is enabled. */
|
|
if (pci_find_extcap(dev, PCIY_MSI, ®) == 0) {
|
|
if (reg != 0)
|
|
sc->bce_cap_flags |= BCE_MSI_CAPABLE_FLAG;
|
|
}
|
|
|
|
/* Check if MSI-X capability is enabled. */
|
|
if (pci_find_extcap(dev, PCIY_MSIX, ®) == 0) {
|
|
if (reg != 0)
|
|
sc->bce_cap_flags |= BCE_MSIX_CAPABLE_FLAG;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_LOAD);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Device attach function. */
|
|
/* */
|
|
/* Allocates device resources, performs secondary chip identification, */
|
|
/* resets and initializes the hardware, and initializes driver instance */
|
|
/* variables. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_attach(device_t dev)
|
|
{
|
|
struct bce_softc *sc;
|
|
struct ifnet *ifp;
|
|
u32 val;
|
|
int error, rid, rc = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->bce_dev = dev;
|
|
|
|
DBENTER(BCE_VERBOSE_LOAD | BCE_VERBOSE_RESET);
|
|
|
|
sc->bce_unit = device_get_unit(dev);
|
|
|
|
/* Set initial device and PHY flags */
|
|
sc->bce_flags = 0;
|
|
sc->bce_phy_flags = 0;
|
|
|
|
pci_enable_busmaster(dev);
|
|
|
|
/* Allocate PCI memory resources. */
|
|
rid = PCIR_BAR(0);
|
|
sc->bce_res_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE);
|
|
|
|
if (sc->bce_res_mem == NULL) {
|
|
BCE_PRINTF("%s(%d): PCI memory allocation failed\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Get various resource handles. */
|
|
sc->bce_btag = rman_get_bustag(sc->bce_res_mem);
|
|
sc->bce_bhandle = rman_get_bushandle(sc->bce_res_mem);
|
|
sc->bce_vhandle = (vm_offset_t) rman_get_virtual(sc->bce_res_mem);
|
|
|
|
bce_probe_pci_caps(dev, sc);
|
|
|
|
rid = 1;
|
|
#if 0
|
|
/* Try allocating MSI-X interrupts. */
|
|
if ((sc->bce_cap_flags & BCE_MSIX_CAPABLE_FLAG) &&
|
|
(bce_msi_enable >= 2) &&
|
|
((sc->bce_res_irq = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE)) != NULL)) {
|
|
|
|
msi_needed = sc->bce_msi_count = 1;
|
|
|
|
if (((error = pci_alloc_msix(dev, &sc->bce_msi_count)) != 0) ||
|
|
(sc->bce_msi_count != msi_needed)) {
|
|
BCE_PRINTF("%s(%d): MSI-X allocation failed! Requested = %d,"
|
|
"Received = %d, error = %d\n", __FILE__, __LINE__,
|
|
msi_needed, sc->bce_msi_count, error);
|
|
sc->bce_msi_count = 0;
|
|
pci_release_msi(dev);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, rid,
|
|
sc->bce_res_irq);
|
|
sc->bce_res_irq = NULL;
|
|
} else {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Using MSI-X interrupt.\n",
|
|
__FUNCTION__);
|
|
sc->bce_flags |= BCE_USING_MSIX_FLAG;
|
|
sc->bce_intr = bce_intr;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Try allocating a MSI interrupt. */
|
|
if ((sc->bce_cap_flags & BCE_MSI_CAPABLE_FLAG) &&
|
|
(bce_msi_enable >= 1) && (sc->bce_msi_count == 0)) {
|
|
sc->bce_msi_count = 1;
|
|
if ((error = pci_alloc_msi(dev, &sc->bce_msi_count)) != 0) {
|
|
BCE_PRINTF("%s(%d): MSI allocation failed! error = %d\n",
|
|
__FILE__, __LINE__, error);
|
|
sc->bce_msi_count = 0;
|
|
pci_release_msi(dev);
|
|
} else {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Using MSI interrupt.\n",
|
|
__FUNCTION__);
|
|
sc->bce_flags |= BCE_USING_MSI_FLAG;
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716))
|
|
sc->bce_flags |= BCE_ONE_SHOT_MSI_FLAG;
|
|
sc->bce_irq_rid = 1;
|
|
sc->bce_intr = bce_intr;
|
|
}
|
|
}
|
|
|
|
/* Try allocating a legacy interrupt. */
|
|
if (sc->bce_msi_count == 0) {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Using INTx interrupt.\n",
|
|
__FUNCTION__);
|
|
rid = 0;
|
|
sc->bce_intr = bce_intr;
|
|
}
|
|
|
|
sc->bce_res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&rid, RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
sc->bce_irq_rid = rid;
|
|
|
|
/* Report any IRQ allocation errors. */
|
|
if (sc->bce_res_irq == NULL) {
|
|
BCE_PRINTF("%s(%d): PCI map interrupt failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Initialize mutex for the current device instance. */
|
|
BCE_LOCK_INIT(sc, device_get_nameunit(dev));
|
|
|
|
/*
|
|
* Configure byte swap and enable indirect register access.
|
|
* Rely on CPU to do target byte swapping on big endian systems.
|
|
* Access to registers outside of PCI configurtion space are not
|
|
* valid until this is done.
|
|
*/
|
|
pci_write_config(dev, BCE_PCICFG_MISC_CONFIG,
|
|
BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
|
|
BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP, 4);
|
|
|
|
/* Save ASIC revsion info. */
|
|
sc->bce_chipid = REG_RD(sc, BCE_MISC_ID);
|
|
|
|
/* Weed out any non-production controller revisions. */
|
|
switch(BCE_CHIP_ID(sc)) {
|
|
case BCE_CHIP_ID_5706_A0:
|
|
case BCE_CHIP_ID_5706_A1:
|
|
case BCE_CHIP_ID_5708_A0:
|
|
case BCE_CHIP_ID_5708_B0:
|
|
case BCE_CHIP_ID_5709_A0:
|
|
case BCE_CHIP_ID_5709_B0:
|
|
case BCE_CHIP_ID_5709_B1:
|
|
case BCE_CHIP_ID_5709_B2:
|
|
BCE_PRINTF("%s(%d): Unsupported controller revision (%c%d)!\n",
|
|
__FILE__, __LINE__,
|
|
(((pci_read_config(dev, PCIR_REVID, 4) & 0xf0) >> 4) + 'A'),
|
|
(pci_read_config(dev, PCIR_REVID, 4) & 0xf));
|
|
rc = ENODEV;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/*
|
|
* The embedded PCIe to PCI-X bridge (EPB)
|
|
* in the 5708 cannot address memory above
|
|
* 40 bits (E7_5708CB1_23043 & E6_5708SB1_23043).
|
|
*/
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5708)
|
|
sc->max_bus_addr = BCE_BUS_SPACE_MAXADDR;
|
|
else
|
|
sc->max_bus_addr = BUS_SPACE_MAXADDR;
|
|
|
|
/*
|
|
* Find the base address for shared memory access.
|
|
* Newer versions of bootcode use a signature and offset
|
|
* while older versions use a fixed address.
|
|
*/
|
|
val = REG_RD_IND(sc, BCE_SHM_HDR_SIGNATURE);
|
|
if ((val & BCE_SHM_HDR_SIGNATURE_SIG_MASK) == BCE_SHM_HDR_SIGNATURE_SIG)
|
|
/* Multi-port devices use different offsets in shared memory. */
|
|
sc->bce_shmem_base = REG_RD_IND(sc, BCE_SHM_HDR_ADDR_0 +
|
|
(pci_get_function(sc->bce_dev) << 2));
|
|
else
|
|
sc->bce_shmem_base = HOST_VIEW_SHMEM_BASE;
|
|
|
|
DBPRINT(sc, BCE_VERBOSE_FIRMWARE, "%s(): bce_shmem_base = 0x%08X\n",
|
|
__FUNCTION__, sc->bce_shmem_base);
|
|
|
|
/* Fetch the bootcode revision. */
|
|
sc->bce_fw_ver = REG_RD_IND(sc, sc->bce_shmem_base +
|
|
BCE_DEV_INFO_BC_REV);
|
|
|
|
/* Check if any management firmware is running. */
|
|
val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_PORT_FEATURE);
|
|
if (val & (BCE_PORT_FEATURE_ASF_ENABLED | BCE_PORT_FEATURE_IMD_ENABLED))
|
|
sc->bce_flags |= BCE_MFW_ENABLE_FLAG;
|
|
|
|
/* Get PCI bus information (speed and type). */
|
|
val = REG_RD(sc, BCE_PCICFG_MISC_STATUS);
|
|
if (val & BCE_PCICFG_MISC_STATUS_PCIX_DET) {
|
|
u32 clkreg;
|
|
|
|
sc->bce_flags |= BCE_PCIX_FLAG;
|
|
|
|
clkreg = REG_RD(sc, BCE_PCICFG_PCI_CLOCK_CONTROL_BITS);
|
|
|
|
clkreg &= BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET;
|
|
switch (clkreg) {
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ:
|
|
sc->bus_speed_mhz = 133;
|
|
break;
|
|
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ:
|
|
sc->bus_speed_mhz = 100;
|
|
break;
|
|
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ:
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ:
|
|
sc->bus_speed_mhz = 66;
|
|
break;
|
|
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ:
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ:
|
|
sc->bus_speed_mhz = 50;
|
|
break;
|
|
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW:
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ:
|
|
case BCE_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ:
|
|
sc->bus_speed_mhz = 33;
|
|
break;
|
|
}
|
|
} else {
|
|
if (val & BCE_PCICFG_MISC_STATUS_M66EN)
|
|
sc->bus_speed_mhz = 66;
|
|
else
|
|
sc->bus_speed_mhz = 33;
|
|
}
|
|
|
|
if (val & BCE_PCICFG_MISC_STATUS_32BIT_DET)
|
|
sc->bce_flags |= BCE_PCI_32BIT_FLAG;
|
|
|
|
/* Reset the controller and announce to bootcode that driver is present. */
|
|
if (bce_reset(sc, BCE_DRV_MSG_CODE_RESET)) {
|
|
BCE_PRINTF("%s(%d): Controller reset failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Initialize the controller. */
|
|
if (bce_chipinit(sc)) {
|
|
BCE_PRINTF("%s(%d): Controller initialization failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Perform NVRAM test. */
|
|
if (bce_nvram_test(sc)) {
|
|
BCE_PRINTF("%s(%d): NVRAM test failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Fetch the permanent Ethernet MAC address. */
|
|
bce_get_mac_addr(sc);
|
|
|
|
/*
|
|
* Trip points control how many BDs
|
|
* should be ready before generating an
|
|
* interrupt while ticks control how long
|
|
* a BD can sit in the chain before
|
|
* generating an interrupt. Set the default
|
|
* values for the RX and TX chains.
|
|
*/
|
|
|
|
#ifdef BCE_DEBUG
|
|
/* Force more frequent interrupts. */
|
|
sc->bce_tx_quick_cons_trip_int = 1;
|
|
sc->bce_tx_quick_cons_trip = 1;
|
|
sc->bce_tx_ticks_int = 0;
|
|
sc->bce_tx_ticks = 0;
|
|
|
|
sc->bce_rx_quick_cons_trip_int = 1;
|
|
sc->bce_rx_quick_cons_trip = 1;
|
|
sc->bce_rx_ticks_int = 0;
|
|
sc->bce_rx_ticks = 0;
|
|
#else
|
|
/* Improve throughput at the expense of increased latency. */
|
|
sc->bce_tx_quick_cons_trip_int = 20;
|
|
sc->bce_tx_quick_cons_trip = 20;
|
|
sc->bce_tx_ticks_int = 80;
|
|
sc->bce_tx_ticks = 80;
|
|
|
|
sc->bce_rx_quick_cons_trip_int = 6;
|
|
sc->bce_rx_quick_cons_trip = 6;
|
|
sc->bce_rx_ticks_int = 18;
|
|
sc->bce_rx_ticks = 18;
|
|
#endif
|
|
|
|
/* Update statistics once every second. */
|
|
sc->bce_stats_ticks = 1000000 & 0xffff00;
|
|
|
|
/* Find the media type for the adapter. */
|
|
bce_get_media(sc);
|
|
|
|
/* Store data needed by PHY driver for backplane applications */
|
|
sc->bce_shared_hw_cfg = REG_RD_IND(sc, sc->bce_shmem_base +
|
|
BCE_SHARED_HW_CFG_CONFIG);
|
|
sc->bce_port_hw_cfg = REG_RD_IND(sc, sc->bce_shmem_base +
|
|
BCE_PORT_HW_CFG_CONFIG);
|
|
|
|
/* Allocate DMA memory resources. */
|
|
if (bce_dma_alloc(dev)) {
|
|
BCE_PRINTF("%s(%d): DMA resource allocation failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Allocate an ifnet structure. */
|
|
ifp = sc->bce_ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
BCE_PRINTF("%s(%d): Interface allocation failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Initialize the ifnet interface. */
|
|
ifp->if_softc = sc;
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = bce_ioctl;
|
|
ifp->if_start = bce_start;
|
|
ifp->if_init = bce_init;
|
|
ifp->if_mtu = ETHERMTU;
|
|
|
|
if (bce_tso_enable) {
|
|
ifp->if_hwassist = BCE_IF_HWASSIST | CSUM_TSO;
|
|
ifp->if_capabilities = BCE_IF_CAPABILITIES | IFCAP_TSO4;
|
|
} else {
|
|
ifp->if_hwassist = BCE_IF_HWASSIST;
|
|
ifp->if_capabilities = BCE_IF_CAPABILITIES;
|
|
}
|
|
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
|
|
/*
|
|
* Assume standard mbuf sizes for buffer allocation.
|
|
* This may change later if the MTU size is set to
|
|
* something other than 1500.
|
|
*/
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
sc->rx_bd_mbuf_alloc_size = MHLEN;
|
|
/* Make sure offset is 16 byte aligned for hardware. */
|
|
sc->rx_bd_mbuf_align_pad = roundup2((MSIZE - MHLEN), 16) -
|
|
(MSIZE - MHLEN);
|
|
sc->rx_bd_mbuf_data_len = sc->rx_bd_mbuf_alloc_size -
|
|
sc->rx_bd_mbuf_align_pad;
|
|
sc->pg_bd_mbuf_alloc_size = MCLBYTES;
|
|
#else
|
|
sc->rx_bd_mbuf_alloc_size = MCLBYTES;
|
|
sc->rx_bd_mbuf_align_pad = roundup2(MCLBYTES, 16) - MCLBYTES;
|
|
sc->rx_bd_mbuf_data_len = sc->rx_bd_mbuf_alloc_size -
|
|
sc->rx_bd_mbuf_align_pad;
|
|
#endif
|
|
|
|
ifp->if_snd.ifq_drv_maxlen = USABLE_TX_BD;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, ifp->if_snd.ifq_drv_maxlen);
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_2_5G_CAPABLE_FLAG)
|
|
ifp->if_baudrate = IF_Mbps(2500ULL);
|
|
else
|
|
ifp->if_baudrate = IF_Mbps(1000);
|
|
|
|
/* Check for an MII child bus by probing the PHY. */
|
|
if (mii_phy_probe(dev, &sc->bce_miibus, bce_ifmedia_upd,
|
|
bce_ifmedia_sts)) {
|
|
BCE_PRINTF("%s(%d): No PHY found on child MII bus!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENXIO;
|
|
goto bce_attach_fail;
|
|
}
|
|
|
|
/* Attach to the Ethernet interface list. */
|
|
ether_ifattach(ifp, sc->eaddr);
|
|
|
|
#if __FreeBSD_version < 500000
|
|
callout_init(&sc->bce_tick_callout);
|
|
callout_init(&sc->bce_pulse_callout);
|
|
#else
|
|
callout_init_mtx(&sc->bce_tick_callout, &sc->bce_mtx, 0);
|
|
callout_init_mtx(&sc->bce_pulse_callout, &sc->bce_mtx, 0);
|
|
#endif
|
|
|
|
/* Hookup IRQ last. */
|
|
rc = bus_setup_intr(dev, sc->bce_res_irq, INTR_TYPE_NET | INTR_MPSAFE,
|
|
NULL, bce_intr, sc, &sc->bce_intrhand);
|
|
|
|
if (rc) {
|
|
BCE_PRINTF("%s(%d): Failed to setup IRQ!\n",
|
|
__FILE__, __LINE__);
|
|
bce_detach(dev);
|
|
goto bce_attach_exit;
|
|
}
|
|
|
|
/*
|
|
* At this point we've acquired all the resources
|
|
* we need to run so there's no turning back, we're
|
|
* cleared for launch.
|
|
*/
|
|
|
|
/* Print some important debugging info. */
|
|
DBRUNMSG(BCE_INFO, bce_dump_driver_state(sc));
|
|
|
|
/* Add the supported sysctls to the kernel. */
|
|
bce_add_sysctls(sc);
|
|
|
|
BCE_LOCK(sc);
|
|
|
|
/*
|
|
* The chip reset earlier notified the bootcode that
|
|
* a driver is present. We now need to start our pulse
|
|
* routine so that the bootcode is reminded that we're
|
|
* still running.
|
|
*/
|
|
bce_pulse(sc);
|
|
|
|
bce_mgmt_init_locked(sc);
|
|
BCE_UNLOCK(sc);
|
|
|
|
/* Finally, print some useful adapter info */
|
|
bce_print_adapter_info(sc);
|
|
DBPRINT(sc, BCE_FATAL, "%s(): sc = %p\n",
|
|
__FUNCTION__, sc);
|
|
|
|
goto bce_attach_exit;
|
|
|
|
bce_attach_fail:
|
|
bce_release_resources(sc);
|
|
|
|
bce_attach_exit:
|
|
|
|
DBEXIT(BCE_VERBOSE_LOAD | BCE_VERBOSE_RESET);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Device detach function. */
|
|
/* */
|
|
/* Stops the controller, resets the controller, and releases resources. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_detach(device_t dev)
|
|
{
|
|
struct bce_softc *sc = device_get_softc(dev);
|
|
struct ifnet *ifp;
|
|
u32 msg;
|
|
|
|
DBENTER(BCE_VERBOSE_UNLOAD | BCE_VERBOSE_RESET);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
/* Stop and reset the controller. */
|
|
BCE_LOCK(sc);
|
|
|
|
/* Stop the pulse so the bootcode can go to driver absent state. */
|
|
callout_stop(&sc->bce_pulse_callout);
|
|
|
|
bce_stop(sc);
|
|
if (sc->bce_flags & BCE_NO_WOL_FLAG)
|
|
msg = BCE_DRV_MSG_CODE_UNLOAD_LNK_DN;
|
|
else
|
|
msg = BCE_DRV_MSG_CODE_UNLOAD;
|
|
bce_reset(sc, msg);
|
|
|
|
BCE_UNLOCK(sc);
|
|
|
|
ether_ifdetach(ifp);
|
|
|
|
/* If we have a child device on the MII bus remove it too. */
|
|
bus_generic_detach(dev);
|
|
device_delete_child(dev, sc->bce_miibus);
|
|
|
|
/* Release all remaining resources. */
|
|
bce_release_resources(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_UNLOAD | BCE_VERBOSE_RESET);
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Device shutdown function. */
|
|
/* */
|
|
/* Stops and resets the controller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_shutdown(device_t dev)
|
|
{
|
|
struct bce_softc *sc = device_get_softc(dev);
|
|
u32 msg;
|
|
|
|
DBENTER(BCE_VERBOSE);
|
|
|
|
BCE_LOCK(sc);
|
|
bce_stop(sc);
|
|
if (sc->bce_flags & BCE_NO_WOL_FLAG)
|
|
msg = BCE_DRV_MSG_CODE_UNLOAD_LNK_DN;
|
|
else
|
|
msg = BCE_DRV_MSG_CODE_UNLOAD;
|
|
bce_reset(sc, msg);
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
#ifdef BCE_DEBUG
|
|
/****************************************************************************/
|
|
/* Register read. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The value of the register. */
|
|
/****************************************************************************/
|
|
static u32
|
|
bce_reg_rd(struct bce_softc *sc, u32 offset)
|
|
{
|
|
u32 val = bus_space_read_4(sc->bce_btag, sc->bce_bhandle, offset);
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%08X\n",
|
|
__FUNCTION__, offset, val);
|
|
return val;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Register write (16 bit). */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_reg_wr16(struct bce_softc *sc, u32 offset, u16 val)
|
|
{
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%04X\n",
|
|
__FUNCTION__, offset, val);
|
|
bus_space_write_2(sc->bce_btag, sc->bce_bhandle, offset, val);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Register write. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_reg_wr(struct bce_softc *sc, u32 offset, u32 val)
|
|
{
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%08X\n",
|
|
__FUNCTION__, offset, val);
|
|
bus_space_write_4(sc->bce_btag, sc->bce_bhandle, offset, val);
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* Indirect register read. */
|
|
/* */
|
|
/* Reads NetXtreme II registers using an index/data register pair in PCI */
|
|
/* configuration space. Using this mechanism avoids issues with posted */
|
|
/* reads but is much slower than memory-mapped I/O. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The value of the register. */
|
|
/****************************************************************************/
|
|
static u32
|
|
bce_reg_rd_ind(struct bce_softc *sc, u32 offset)
|
|
{
|
|
device_t dev;
|
|
dev = sc->bce_dev;
|
|
|
|
pci_write_config(dev, BCE_PCICFG_REG_WINDOW_ADDRESS, offset, 4);
|
|
#ifdef BCE_DEBUG
|
|
{
|
|
u32 val;
|
|
val = pci_read_config(dev, BCE_PCICFG_REG_WINDOW, 4);
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%08X\n",
|
|
__FUNCTION__, offset, val);
|
|
return val;
|
|
}
|
|
#else
|
|
return pci_read_config(dev, BCE_PCICFG_REG_WINDOW, 4);
|
|
#endif
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Indirect register write. */
|
|
/* */
|
|
/* Writes NetXtreme II registers using an index/data register pair in PCI */
|
|
/* configuration space. Using this mechanism avoids issues with posted */
|
|
/* writes but is muchh slower than memory-mapped I/O. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_reg_wr_ind(struct bce_softc *sc, u32 offset, u32 val)
|
|
{
|
|
device_t dev;
|
|
dev = sc->bce_dev;
|
|
|
|
DBPRINT(sc, BCE_INSANE_REG, "%s(); offset = 0x%08X, val = 0x%08X\n",
|
|
__FUNCTION__, offset, val);
|
|
|
|
pci_write_config(dev, BCE_PCICFG_REG_WINDOW_ADDRESS, offset, 4);
|
|
pci_write_config(dev, BCE_PCICFG_REG_WINDOW, val, 4);
|
|
}
|
|
|
|
|
|
#ifdef BCE_DEBUG
|
|
/****************************************************************************/
|
|
/* Context memory read. */
|
|
/* */
|
|
/* The NetXtreme II controller uses context memory to track connection */
|
|
/* information for L2 and higher network protocols. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The requested 32 bit value of context memory. */
|
|
/****************************************************************************/
|
|
static u32
|
|
bce_ctx_rd(struct bce_softc *sc, u32 cid_addr, u32 ctx_offset)
|
|
{
|
|
u32 idx, offset, retry_cnt = 5, val;
|
|
|
|
DBRUNIF((cid_addr > MAX_CID_ADDR || ctx_offset & 0x3 || cid_addr & CTX_MASK),
|
|
BCE_PRINTF("%s(): Invalid CID address: 0x%08X.\n",
|
|
__FUNCTION__, cid_addr));
|
|
|
|
offset = ctx_offset + cid_addr;
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
|
|
REG_WR(sc, BCE_CTX_CTX_CTRL, (offset | BCE_CTX_CTX_CTRL_READ_REQ));
|
|
|
|
for (idx = 0; idx < retry_cnt; idx++) {
|
|
val = REG_RD(sc, BCE_CTX_CTX_CTRL);
|
|
if ((val & BCE_CTX_CTX_CTRL_READ_REQ) == 0)
|
|
break;
|
|
DELAY(5);
|
|
}
|
|
|
|
if (val & BCE_CTX_CTX_CTRL_READ_REQ)
|
|
BCE_PRINTF("%s(%d); Unable to read CTX memory: "
|
|
"cid_addr = 0x%08X, offset = 0x%08X!\n",
|
|
__FILE__, __LINE__, cid_addr, ctx_offset);
|
|
|
|
val = REG_RD(sc, BCE_CTX_CTX_DATA);
|
|
} else {
|
|
REG_WR(sc, BCE_CTX_DATA_ADR, offset);
|
|
val = REG_RD(sc, BCE_CTX_DATA);
|
|
}
|
|
|
|
DBPRINT(sc, BCE_EXTREME_CTX, "%s(); cid_addr = 0x%08X, offset = 0x%08X, "
|
|
"val = 0x%08X\n", __FUNCTION__, cid_addr, ctx_offset, val);
|
|
|
|
return(val);
|
|
}
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Context memory write. */
|
|
/* */
|
|
/* The NetXtreme II controller uses context memory to track connection */
|
|
/* information for L2 and higher network protocols. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_ctx_wr(struct bce_softc *sc, u32 cid_addr, u32 ctx_offset, u32 ctx_val)
|
|
{
|
|
u32 idx, offset = ctx_offset + cid_addr;
|
|
u32 val, retry_cnt = 5;
|
|
|
|
DBPRINT(sc, BCE_EXTREME_CTX, "%s(); cid_addr = 0x%08X, offset = 0x%08X, "
|
|
"val = 0x%08X\n", __FUNCTION__, cid_addr, ctx_offset, ctx_val);
|
|
|
|
DBRUNIF((cid_addr > MAX_CID_ADDR || ctx_offset & 0x3 || cid_addr & CTX_MASK),
|
|
BCE_PRINTF("%s(): Invalid CID address: 0x%08X.\n",
|
|
__FUNCTION__, cid_addr));
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
|
|
REG_WR(sc, BCE_CTX_CTX_DATA, ctx_val);
|
|
REG_WR(sc, BCE_CTX_CTX_CTRL, (offset | BCE_CTX_CTX_CTRL_WRITE_REQ));
|
|
|
|
for (idx = 0; idx < retry_cnt; idx++) {
|
|
val = REG_RD(sc, BCE_CTX_CTX_CTRL);
|
|
if ((val & BCE_CTX_CTX_CTRL_WRITE_REQ) == 0)
|
|
break;
|
|
DELAY(5);
|
|
}
|
|
|
|
if (val & BCE_CTX_CTX_CTRL_WRITE_REQ)
|
|
BCE_PRINTF("%s(%d); Unable to write CTX memory: "
|
|
"cid_addr = 0x%08X, offset = 0x%08X!\n",
|
|
__FILE__, __LINE__, cid_addr, ctx_offset);
|
|
|
|
} else {
|
|
REG_WR(sc, BCE_CTX_DATA_ADR, offset);
|
|
REG_WR(sc, BCE_CTX_DATA, ctx_val);
|
|
}
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PHY register read. */
|
|
/* */
|
|
/* Implements register reads on the MII bus. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The value of the register. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_miibus_read_reg(device_t dev, int phy, int reg)
|
|
{
|
|
struct bce_softc *sc;
|
|
u32 val;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Make sure we are accessing the correct PHY address. */
|
|
if (phy != sc->bce_phy_addr) {
|
|
DBPRINT(sc, BCE_INSANE_PHY, "Invalid PHY address %d for PHY read!\n", phy);
|
|
return(0);
|
|
}
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
val &= ~BCE_EMAC_MDIO_MODE_AUTO_POLL;
|
|
|
|
REG_WR(sc, BCE_EMAC_MDIO_MODE, val);
|
|
REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
|
|
DELAY(40);
|
|
}
|
|
|
|
|
|
val = BCE_MIPHY(phy) | BCE_MIREG(reg) |
|
|
BCE_EMAC_MDIO_COMM_COMMAND_READ | BCE_EMAC_MDIO_COMM_DISEXT |
|
|
BCE_EMAC_MDIO_COMM_START_BUSY;
|
|
REG_WR(sc, BCE_EMAC_MDIO_COMM, val);
|
|
|
|
for (i = 0; i < BCE_PHY_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_COMM);
|
|
if (!(val & BCE_EMAC_MDIO_COMM_START_BUSY)) {
|
|
DELAY(5);
|
|
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_COMM);
|
|
val &= BCE_EMAC_MDIO_COMM_DATA;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (val & BCE_EMAC_MDIO_COMM_START_BUSY) {
|
|
BCE_PRINTF("%s(%d): Error: PHY read timeout! phy = %d, reg = 0x%04X\n",
|
|
__FILE__, __LINE__, phy, reg);
|
|
val = 0x0;
|
|
} else {
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_COMM);
|
|
}
|
|
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
|
|
val = REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
val |= BCE_EMAC_MDIO_MODE_AUTO_POLL;
|
|
|
|
REG_WR(sc, BCE_EMAC_MDIO_MODE, val);
|
|
REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
|
|
DELAY(40);
|
|
}
|
|
|
|
DB_PRINT_PHY_REG(reg, val);
|
|
return (val & 0xffff);
|
|
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* PHY register write. */
|
|
/* */
|
|
/* Implements register writes on the MII bus. */
|
|
/* */
|
|
/* Returns: */
|
|
/* The value of the register. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_miibus_write_reg(device_t dev, int phy, int reg, int val)
|
|
{
|
|
struct bce_softc *sc;
|
|
u32 val1;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Make sure we are accessing the correct PHY address. */
|
|
if (phy != sc->bce_phy_addr) {
|
|
DBPRINT(sc, BCE_INSANE_PHY, "Invalid PHY address %d for PHY write!\n", phy);
|
|
return(0);
|
|
}
|
|
|
|
DB_PRINT_PHY_REG(reg, val);
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
|
|
val1 = REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
val1 &= ~BCE_EMAC_MDIO_MODE_AUTO_POLL;
|
|
|
|
REG_WR(sc, BCE_EMAC_MDIO_MODE, val1);
|
|
REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
|
|
DELAY(40);
|
|
}
|
|
|
|
val1 = BCE_MIPHY(phy) | BCE_MIREG(reg) | val |
|
|
BCE_EMAC_MDIO_COMM_COMMAND_WRITE |
|
|
BCE_EMAC_MDIO_COMM_START_BUSY | BCE_EMAC_MDIO_COMM_DISEXT;
|
|
REG_WR(sc, BCE_EMAC_MDIO_COMM, val1);
|
|
|
|
for (i = 0; i < BCE_PHY_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
|
|
val1 = REG_RD(sc, BCE_EMAC_MDIO_COMM);
|
|
if (!(val1 & BCE_EMAC_MDIO_COMM_START_BUSY)) {
|
|
DELAY(5);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (val1 & BCE_EMAC_MDIO_COMM_START_BUSY)
|
|
BCE_PRINTF("%s(%d): PHY write timeout!\n",
|
|
__FILE__, __LINE__);
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_INT_MODE_AUTO_POLLING_FLAG) {
|
|
val1 = REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
val1 |= BCE_EMAC_MDIO_MODE_AUTO_POLL;
|
|
|
|
REG_WR(sc, BCE_EMAC_MDIO_MODE, val1);
|
|
REG_RD(sc, BCE_EMAC_MDIO_MODE);
|
|
|
|
DELAY(40);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* MII bus status change. */
|
|
/* */
|
|
/* Called by the MII bus driver when the PHY establishes link to set the */
|
|
/* MAC interface registers. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_miibus_statchg(device_t dev)
|
|
{
|
|
struct bce_softc *sc;
|
|
struct mii_data *mii;
|
|
int val;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
DBENTER(BCE_VERBOSE_PHY);
|
|
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
|
|
val = REG_RD(sc, BCE_EMAC_MODE);
|
|
val &= ~(BCE_EMAC_MODE_PORT | BCE_EMAC_MODE_HALF_DUPLEX |
|
|
BCE_EMAC_MODE_MAC_LOOP | BCE_EMAC_MODE_FORCE_LINK |
|
|
BCE_EMAC_MODE_25G);
|
|
|
|
/* Set MII or GMII interface based on the speed negotiated by the PHY. */
|
|
switch (IFM_SUBTYPE(mii->mii_media_active)) {
|
|
case IFM_10_T:
|
|
if (BCE_CHIP_NUM(sc) != BCE_CHIP_NUM_5706) {
|
|
DBPRINT(sc, BCE_INFO, "Enabling 10Mb interface.\n");
|
|
val |= BCE_EMAC_MODE_PORT_MII_10;
|
|
break;
|
|
}
|
|
/* fall-through */
|
|
case IFM_100_TX:
|
|
DBPRINT(sc, BCE_INFO, "Enabling MII interface.\n");
|
|
val |= BCE_EMAC_MODE_PORT_MII;
|
|
break;
|
|
case IFM_2500_SX:
|
|
DBPRINT(sc, BCE_INFO, "Enabling 2.5G MAC mode.\n");
|
|
val |= BCE_EMAC_MODE_25G;
|
|
/* fall-through */
|
|
case IFM_1000_T:
|
|
case IFM_1000_SX:
|
|
DBPRINT(sc, BCE_INFO, "Enabling GMII interface.\n");
|
|
val |= BCE_EMAC_MODE_PORT_GMII;
|
|
break;
|
|
default:
|
|
DBPRINT(sc, BCE_INFO, "Unknown speed, enabling default GMII "
|
|
"interface.\n");
|
|
val |= BCE_EMAC_MODE_PORT_GMII;
|
|
}
|
|
|
|
/* Set half or full duplex based on the duplicity negotiated by the PHY. */
|
|
if ((mii->mii_media_active & IFM_GMASK) == IFM_HDX) {
|
|
DBPRINT(sc, BCE_INFO, "Setting Half-Duplex interface.\n");
|
|
val |= BCE_EMAC_MODE_HALF_DUPLEX;
|
|
} else
|
|
DBPRINT(sc, BCE_INFO, "Setting Full-Duplex interface.\n");
|
|
|
|
REG_WR(sc, BCE_EMAC_MODE, val);
|
|
|
|
#if 0
|
|
/* ToDo: Enable flow control support in brgphy and bge. */
|
|
/* FLAG0 is set if RX is enabled and FLAG1 if TX is enabled */
|
|
if (mii->mii_media_active & IFM_FLAG0)
|
|
BCE_SETBIT(sc, BCE_EMAC_RX_MODE, BCE_EMAC_RX_MODE_FLOW_EN);
|
|
if (mii->mii_media_active & IFM_FLAG1)
|
|
BCE_SETBIT(sc, BCE_EMAC_RX_MODE, BCE_EMAC_TX_MODE_FLOW_EN);
|
|
#endif
|
|
|
|
DBEXIT(BCE_VERBOSE_PHY);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Acquire NVRAM lock. */
|
|
/* */
|
|
/* Before the NVRAM can be accessed the caller must acquire an NVRAM lock. */
|
|
/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */
|
|
/* for use by the driver. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_acquire_nvram_lock(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int j, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
/* Request access to the flash interface. */
|
|
REG_WR(sc, BCE_NVM_SW_ARB, BCE_NVM_SW_ARB_ARB_REQ_SET2);
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
val = REG_RD(sc, BCE_NVM_SW_ARB);
|
|
if (val & BCE_NVM_SW_ARB_ARB_ARB2)
|
|
break;
|
|
|
|
DELAY(5);
|
|
}
|
|
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
DBPRINT(sc, BCE_WARN, "Timeout acquiring NVRAM lock!\n");
|
|
rc = EBUSY;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Release NVRAM lock. */
|
|
/* */
|
|
/* When the caller is finished accessing NVRAM the lock must be released. */
|
|
/* Locks 0 and 2 are reserved, lock 1 is used by firmware and lock 2 is */
|
|
/* for use by the driver. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_release_nvram_lock(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int j, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
/*
|
|
* Relinquish nvram interface.
|
|
*/
|
|
REG_WR(sc, BCE_NVM_SW_ARB, BCE_NVM_SW_ARB_ARB_REQ_CLR2);
|
|
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
val = REG_RD(sc, BCE_NVM_SW_ARB);
|
|
if (!(val & BCE_NVM_SW_ARB_ARB_ARB2))
|
|
break;
|
|
|
|
DELAY(5);
|
|
}
|
|
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
DBPRINT(sc, BCE_WARN, "Timeout releasing NVRAM lock!\n");
|
|
rc = EBUSY;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
/****************************************************************************/
|
|
/* Enable NVRAM write access. */
|
|
/* */
|
|
/* Before writing to NVRAM the caller must enable NVRAM writes. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_enable_nvram_write(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
val = REG_RD(sc, BCE_MISC_CFG);
|
|
REG_WR(sc, BCE_MISC_CFG, val | BCE_MISC_CFG_NVM_WR_EN_PCI);
|
|
|
|
if (!(sc->bce_flash_info->flags & BCE_NV_BUFFERED)) {
|
|
int j;
|
|
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_WREN | BCE_NVM_COMMAND_DOIT);
|
|
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
DELAY(5);
|
|
|
|
val = REG_RD(sc, BCE_NVM_COMMAND);
|
|
if (val & BCE_NVM_COMMAND_DONE)
|
|
break;
|
|
}
|
|
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
DBPRINT(sc, BCE_WARN, "Timeout writing NVRAM!\n");
|
|
rc = EBUSY;
|
|
}
|
|
}
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Disable NVRAM write access. */
|
|
/* */
|
|
/* When the caller is finished writing to NVRAM write access must be */
|
|
/* disabled. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_disable_nvram_write(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
val = REG_RD(sc, BCE_MISC_CFG);
|
|
REG_WR(sc, BCE_MISC_CFG, val & ~BCE_MISC_CFG_NVM_WR_EN);
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
|
|
}
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Enable NVRAM access. */
|
|
/* */
|
|
/* Before accessing NVRAM for read or write operations the caller must */
|
|
/* enabled NVRAM access. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_enable_nvram_access(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
val = REG_RD(sc, BCE_NVM_ACCESS_ENABLE);
|
|
/* Enable both bits, even on read. */
|
|
REG_WR(sc, BCE_NVM_ACCESS_ENABLE,
|
|
val | BCE_NVM_ACCESS_ENABLE_EN | BCE_NVM_ACCESS_ENABLE_WR_EN);
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Disable NVRAM access. */
|
|
/* */
|
|
/* When the caller is finished accessing NVRAM access must be disabled. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_disable_nvram_access(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
val = REG_RD(sc, BCE_NVM_ACCESS_ENABLE);
|
|
|
|
/* Disable both bits, even after read. */
|
|
REG_WR(sc, BCE_NVM_ACCESS_ENABLE,
|
|
val & ~(BCE_NVM_ACCESS_ENABLE_EN |
|
|
BCE_NVM_ACCESS_ENABLE_WR_EN));
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
}
|
|
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
/****************************************************************************/
|
|
/* Erase NVRAM page before writing. */
|
|
/* */
|
|
/* Non-buffered flash parts require that a page be erased before it is */
|
|
/* written. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_erase_page(struct bce_softc *sc, u32 offset)
|
|
{
|
|
u32 cmd;
|
|
int j, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
/* Buffered flash doesn't require an erase. */
|
|
if (sc->bce_flash_info->flags & BCE_NV_BUFFERED)
|
|
goto bce_nvram_erase_page_exit;
|
|
|
|
/* Build an erase command. */
|
|
cmd = BCE_NVM_COMMAND_ERASE | BCE_NVM_COMMAND_WR |
|
|
BCE_NVM_COMMAND_DOIT;
|
|
|
|
/*
|
|
* Clear the DONE bit separately, set the NVRAM adress to erase,
|
|
* and issue the erase command.
|
|
*/
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
|
|
REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE);
|
|
REG_WR(sc, BCE_NVM_COMMAND, cmd);
|
|
|
|
/* Wait for completion. */
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
u32 val;
|
|
|
|
DELAY(5);
|
|
|
|
val = REG_RD(sc, BCE_NVM_COMMAND);
|
|
if (val & BCE_NVM_COMMAND_DONE)
|
|
break;
|
|
}
|
|
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
DBPRINT(sc, BCE_WARN, "Timeout erasing NVRAM.\n");
|
|
rc = EBUSY;
|
|
}
|
|
|
|
bce_nvram_erase_page_exit:
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
#endif /* BCE_NVRAM_WRITE_SUPPORT */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Read a dword (32 bits) from NVRAM. */
|
|
/* */
|
|
/* Read a 32 bit word from NVRAM. The caller is assumed to have already */
|
|
/* obtained the NVRAM lock and enabled the controller for NVRAM access. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success and the 32 bit value read, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_read_dword(struct bce_softc *sc, u32 offset, u8 *ret_val,
|
|
u32 cmd_flags)
|
|
{
|
|
u32 cmd;
|
|
int i, rc = 0;
|
|
|
|
DBENTER(BCE_EXTREME_NVRAM);
|
|
|
|
/* Build the command word. */
|
|
cmd = BCE_NVM_COMMAND_DOIT | cmd_flags;
|
|
|
|
/* Calculate the offset for buffered flash if translation is used. */
|
|
if (sc->bce_flash_info->flags & BCE_NV_TRANSLATE) {
|
|
offset = ((offset / sc->bce_flash_info->page_size) <<
|
|
sc->bce_flash_info->page_bits) +
|
|
(offset % sc->bce_flash_info->page_size);
|
|
}
|
|
|
|
/*
|
|
* Clear the DONE bit separately, set the address to read,
|
|
* and issue the read.
|
|
*/
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
|
|
REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE);
|
|
REG_WR(sc, BCE_NVM_COMMAND, cmd);
|
|
|
|
/* Wait for completion. */
|
|
for (i = 0; i < NVRAM_TIMEOUT_COUNT; i++) {
|
|
u32 val;
|
|
|
|
DELAY(5);
|
|
|
|
val = REG_RD(sc, BCE_NVM_COMMAND);
|
|
if (val & BCE_NVM_COMMAND_DONE) {
|
|
val = REG_RD(sc, BCE_NVM_READ);
|
|
|
|
val = bce_be32toh(val);
|
|
memcpy(ret_val, &val, 4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Check for errors. */
|
|
if (i >= NVRAM_TIMEOUT_COUNT) {
|
|
BCE_PRINTF("%s(%d): Timeout error reading NVRAM at offset 0x%08X!\n",
|
|
__FILE__, __LINE__, offset);
|
|
rc = EBUSY;
|
|
}
|
|
|
|
DBEXIT(BCE_EXTREME_NVRAM);
|
|
return(rc);
|
|
}
|
|
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
/****************************************************************************/
|
|
/* Write a dword (32 bits) to NVRAM. */
|
|
/* */
|
|
/* Write a 32 bit word to NVRAM. The caller is assumed to have already */
|
|
/* obtained the NVRAM lock, enabled the controller for NVRAM access, and */
|
|
/* enabled NVRAM write access. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_write_dword(struct bce_softc *sc, u32 offset, u8 *val,
|
|
u32 cmd_flags)
|
|
{
|
|
u32 cmd, val32;
|
|
int j, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
/* Build the command word. */
|
|
cmd = BCE_NVM_COMMAND_DOIT | BCE_NVM_COMMAND_WR | cmd_flags;
|
|
|
|
/* Calculate the offset for buffered flash if translation is used. */
|
|
if (sc->bce_flash_info->flags & BCE_NV_TRANSLATE) {
|
|
offset = ((offset / sc->bce_flash_info->page_size) <<
|
|
sc->bce_flash_info->page_bits) +
|
|
(offset % sc->bce_flash_info->page_size);
|
|
}
|
|
|
|
/*
|
|
* Clear the DONE bit separately, convert NVRAM data to big-endian,
|
|
* set the NVRAM address to write, and issue the write command
|
|
*/
|
|
REG_WR(sc, BCE_NVM_COMMAND, BCE_NVM_COMMAND_DONE);
|
|
memcpy(&val32, val, 4);
|
|
val32 = htobe32(val32);
|
|
REG_WR(sc, BCE_NVM_WRITE, val32);
|
|
REG_WR(sc, BCE_NVM_ADDR, offset & BCE_NVM_ADDR_NVM_ADDR_VALUE);
|
|
REG_WR(sc, BCE_NVM_COMMAND, cmd);
|
|
|
|
/* Wait for completion. */
|
|
for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) {
|
|
DELAY(5);
|
|
|
|
if (REG_RD(sc, BCE_NVM_COMMAND) & BCE_NVM_COMMAND_DONE)
|
|
break;
|
|
}
|
|
if (j >= NVRAM_TIMEOUT_COUNT) {
|
|
BCE_PRINTF("%s(%d): Timeout error writing NVRAM at offset 0x%08X\n",
|
|
__FILE__, __LINE__, offset);
|
|
rc = EBUSY;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
#endif /* BCE_NVRAM_WRITE_SUPPORT */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize NVRAM access. */
|
|
/* */
|
|
/* Identify the NVRAM device in use and prepare the NVRAM interface to */
|
|
/* access that device. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_init_nvram(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int j, entry_count, rc = 0;
|
|
struct flash_spec *flash;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
sc->bce_flash_info = &flash_5709;
|
|
goto bce_init_nvram_get_flash_size;
|
|
}
|
|
|
|
/* Determine the selected interface. */
|
|
val = REG_RD(sc, BCE_NVM_CFG1);
|
|
|
|
entry_count = sizeof(flash_table) / sizeof(struct flash_spec);
|
|
|
|
/*
|
|
* Flash reconfiguration is required to support additional
|
|
* NVRAM devices not directly supported in hardware.
|
|
* Check if the flash interface was reconfigured
|
|
* by the bootcode.
|
|
*/
|
|
|
|
if (val & 0x40000000) {
|
|
/* Flash interface reconfigured by bootcode. */
|
|
|
|
DBPRINT(sc,BCE_INFO_LOAD,
|
|
"bce_init_nvram(): Flash WAS reconfigured.\n");
|
|
|
|
for (j = 0, flash = &flash_table[0]; j < entry_count;
|
|
j++, flash++) {
|
|
if ((val & FLASH_BACKUP_STRAP_MASK) ==
|
|
(flash->config1 & FLASH_BACKUP_STRAP_MASK)) {
|
|
sc->bce_flash_info = flash;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
/* Flash interface not yet reconfigured. */
|
|
u32 mask;
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Flash was NOT reconfigured.\n",
|
|
__FUNCTION__);
|
|
|
|
if (val & (1 << 23))
|
|
mask = FLASH_BACKUP_STRAP_MASK;
|
|
else
|
|
mask = FLASH_STRAP_MASK;
|
|
|
|
/* Look for the matching NVRAM device configuration data. */
|
|
for (j = 0, flash = &flash_table[0]; j < entry_count; j++, flash++) {
|
|
|
|
/* Check if the device matches any of the known devices. */
|
|
if ((val & mask) == (flash->strapping & mask)) {
|
|
/* Found a device match. */
|
|
sc->bce_flash_info = flash;
|
|
|
|
/* Request access to the flash interface. */
|
|
if ((rc = bce_acquire_nvram_lock(sc)) != 0)
|
|
return rc;
|
|
|
|
/* Reconfigure the flash interface. */
|
|
bce_enable_nvram_access(sc);
|
|
REG_WR(sc, BCE_NVM_CFG1, flash->config1);
|
|
REG_WR(sc, BCE_NVM_CFG2, flash->config2);
|
|
REG_WR(sc, BCE_NVM_CFG3, flash->config3);
|
|
REG_WR(sc, BCE_NVM_WRITE1, flash->write1);
|
|
bce_disable_nvram_access(sc);
|
|
bce_release_nvram_lock(sc);
|
|
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Check if a matching device was found. */
|
|
if (j == entry_count) {
|
|
sc->bce_flash_info = NULL;
|
|
BCE_PRINTF("%s(%d): Unknown Flash NVRAM found!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENODEV;
|
|
}
|
|
|
|
bce_init_nvram_get_flash_size:
|
|
/* Write the flash config data to the shared memory interface. */
|
|
val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_SHARED_HW_CFG_CONFIG2);
|
|
val &= BCE_SHARED_HW_CFG2_NVM_SIZE_MASK;
|
|
if (val)
|
|
sc->bce_flash_size = val;
|
|
else
|
|
sc->bce_flash_size = sc->bce_flash_info->total_size;
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD, "%s(): Found %s, size = 0x%08X\n",
|
|
__FUNCTION__, sc->bce_flash_info->name,
|
|
sc->bce_flash_info->total_size);
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return rc;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Read an arbitrary range of data from NVRAM. */
|
|
/* */
|
|
/* Prepares the NVRAM interface for access and reads the requested data */
|
|
/* into the supplied buffer. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success and the data read, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_read(struct bce_softc *sc, u32 offset, u8 *ret_buf,
|
|
int buf_size)
|
|
{
|
|
int rc = 0;
|
|
u32 cmd_flags, offset32, len32, extra;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
if (buf_size == 0)
|
|
goto bce_nvram_read_exit;
|
|
|
|
/* Request access to the flash interface. */
|
|
if ((rc = bce_acquire_nvram_lock(sc)) != 0)
|
|
goto bce_nvram_read_exit;
|
|
|
|
/* Enable access to flash interface */
|
|
bce_enable_nvram_access(sc);
|
|
|
|
len32 = buf_size;
|
|
offset32 = offset;
|
|
extra = 0;
|
|
|
|
cmd_flags = 0;
|
|
|
|
if (offset32 & 3) {
|
|
u8 buf[4];
|
|
u32 pre_len;
|
|
|
|
offset32 &= ~3;
|
|
pre_len = 4 - (offset & 3);
|
|
|
|
if (pre_len >= len32) {
|
|
pre_len = len32;
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST | BCE_NVM_COMMAND_LAST;
|
|
}
|
|
else {
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST;
|
|
}
|
|
|
|
rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags);
|
|
|
|
if (rc)
|
|
return rc;
|
|
|
|
memcpy(ret_buf, buf + (offset & 3), pre_len);
|
|
|
|
offset32 += 4;
|
|
ret_buf += pre_len;
|
|
len32 -= pre_len;
|
|
}
|
|
|
|
if (len32 & 3) {
|
|
extra = 4 - (len32 & 3);
|
|
len32 = (len32 + 4) & ~3;
|
|
}
|
|
|
|
if (len32 == 4) {
|
|
u8 buf[4];
|
|
|
|
if (cmd_flags)
|
|
cmd_flags = BCE_NVM_COMMAND_LAST;
|
|
else
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST |
|
|
BCE_NVM_COMMAND_LAST;
|
|
|
|
rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags);
|
|
|
|
memcpy(ret_buf, buf, 4 - extra);
|
|
}
|
|
else if (len32 > 0) {
|
|
u8 buf[4];
|
|
|
|
/* Read the first word. */
|
|
if (cmd_flags)
|
|
cmd_flags = 0;
|
|
else
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST;
|
|
|
|
rc = bce_nvram_read_dword(sc, offset32, ret_buf, cmd_flags);
|
|
|
|
/* Advance to the next dword. */
|
|
offset32 += 4;
|
|
ret_buf += 4;
|
|
len32 -= 4;
|
|
|
|
while (len32 > 4 && rc == 0) {
|
|
rc = bce_nvram_read_dword(sc, offset32, ret_buf, 0);
|
|
|
|
/* Advance to the next dword. */
|
|
offset32 += 4;
|
|
ret_buf += 4;
|
|
len32 -= 4;
|
|
}
|
|
|
|
if (rc)
|
|
goto bce_nvram_read_locked_exit;
|
|
|
|
cmd_flags = BCE_NVM_COMMAND_LAST;
|
|
rc = bce_nvram_read_dword(sc, offset32, buf, cmd_flags);
|
|
|
|
memcpy(ret_buf, buf, 4 - extra);
|
|
}
|
|
|
|
bce_nvram_read_locked_exit:
|
|
/* Disable access to flash interface and release the lock. */
|
|
bce_disable_nvram_access(sc);
|
|
bce_release_nvram_lock(sc);
|
|
|
|
bce_nvram_read_exit:
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return rc;
|
|
}
|
|
|
|
|
|
#ifdef BCE_NVRAM_WRITE_SUPPORT
|
|
/****************************************************************************/
|
|
/* Write an arbitrary range of data from NVRAM. */
|
|
/* */
|
|
/* Prepares the NVRAM interface for write access and writes the requested */
|
|
/* data from the supplied buffer. The caller is responsible for */
|
|
/* calculating any appropriate CRCs. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_write(struct bce_softc *sc, u32 offset, u8 *data_buf,
|
|
int buf_size)
|
|
{
|
|
u32 written, offset32, len32;
|
|
u8 *buf, start[4], end[4];
|
|
int rc = 0;
|
|
int align_start, align_end;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM);
|
|
|
|
buf = data_buf;
|
|
offset32 = offset;
|
|
len32 = buf_size;
|
|
align_start = align_end = 0;
|
|
|
|
if ((align_start = (offset32 & 3))) {
|
|
offset32 &= ~3;
|
|
len32 += align_start;
|
|
if ((rc = bce_nvram_read(sc, offset32, start, 4)))
|
|
goto bce_nvram_write_exit;
|
|
}
|
|
|
|
if (len32 & 3) {
|
|
if ((len32 > 4) || !align_start) {
|
|
align_end = 4 - (len32 & 3);
|
|
len32 += align_end;
|
|
if ((rc = bce_nvram_read(sc, offset32 + len32 - 4,
|
|
end, 4))) {
|
|
goto bce_nvram_write_exit;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (align_start || align_end) {
|
|
buf = malloc(len32, M_DEVBUF, M_NOWAIT);
|
|
if (buf == 0) {
|
|
rc = ENOMEM;
|
|
goto bce_nvram_write_exit;
|
|
}
|
|
|
|
if (align_start) {
|
|
memcpy(buf, start, 4);
|
|
}
|
|
|
|
if (align_end) {
|
|
memcpy(buf + len32 - 4, end, 4);
|
|
}
|
|
memcpy(buf + align_start, data_buf, buf_size);
|
|
}
|
|
|
|
written = 0;
|
|
while ((written < len32) && (rc == 0)) {
|
|
u32 page_start, page_end, data_start, data_end;
|
|
u32 addr, cmd_flags;
|
|
int i;
|
|
u8 flash_buffer[264];
|
|
|
|
/* Find the page_start addr */
|
|
page_start = offset32 + written;
|
|
page_start -= (page_start % sc->bce_flash_info->page_size);
|
|
/* Find the page_end addr */
|
|
page_end = page_start + sc->bce_flash_info->page_size;
|
|
/* Find the data_start addr */
|
|
data_start = (written == 0) ? offset32 : page_start;
|
|
/* Find the data_end addr */
|
|
data_end = (page_end > offset32 + len32) ?
|
|
(offset32 + len32) : page_end;
|
|
|
|
/* Request access to the flash interface. */
|
|
if ((rc = bce_acquire_nvram_lock(sc)) != 0)
|
|
goto bce_nvram_write_exit;
|
|
|
|
/* Enable access to flash interface */
|
|
bce_enable_nvram_access(sc);
|
|
|
|
cmd_flags = BCE_NVM_COMMAND_FIRST;
|
|
if (!(sc->bce_flash_info->flags & BCE_NV_BUFFERED)) {
|
|
int j;
|
|
|
|
/* Read the whole page into the buffer
|
|
* (non-buffer flash only) */
|
|
for (j = 0; j < sc->bce_flash_info->page_size; j += 4) {
|
|
if (j == (sc->bce_flash_info->page_size - 4)) {
|
|
cmd_flags |= BCE_NVM_COMMAND_LAST;
|
|
}
|
|
rc = bce_nvram_read_dword(sc,
|
|
page_start + j,
|
|
&flash_buffer[j],
|
|
cmd_flags);
|
|
|
|
if (rc)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
cmd_flags = 0;
|
|
}
|
|
}
|
|
|
|
/* Enable writes to flash interface (unlock write-protect) */
|
|
if ((rc = bce_enable_nvram_write(sc)) != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
/* Erase the page */
|
|
if ((rc = bce_nvram_erase_page(sc, page_start)) != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
/* Re-enable the write again for the actual write */
|
|
bce_enable_nvram_write(sc);
|
|
|
|
/* Loop to write back the buffer data from page_start to
|
|
* data_start */
|
|
i = 0;
|
|
if (!(sc->bce_flash_info->flags & BCE_NV_BUFFERED)) {
|
|
for (addr = page_start; addr < data_start;
|
|
addr += 4, i += 4) {
|
|
|
|
rc = bce_nvram_write_dword(sc, addr,
|
|
&flash_buffer[i], cmd_flags);
|
|
|
|
if (rc != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
cmd_flags = 0;
|
|
}
|
|
}
|
|
|
|
/* Loop to write the new data from data_start to data_end */
|
|
for (addr = data_start; addr < data_end; addr += 4, i++) {
|
|
if ((addr == page_end - 4) ||
|
|
((sc->bce_flash_info->flags & BCE_NV_BUFFERED) &&
|
|
(addr == data_end - 4))) {
|
|
|
|
cmd_flags |= BCE_NVM_COMMAND_LAST;
|
|
}
|
|
rc = bce_nvram_write_dword(sc, addr, buf,
|
|
cmd_flags);
|
|
|
|
if (rc != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
cmd_flags = 0;
|
|
buf += 4;
|
|
}
|
|
|
|
/* Loop to write back the buffer data from data_end
|
|
* to page_end */
|
|
if (!(sc->bce_flash_info->flags & BCE_NV_BUFFERED)) {
|
|
for (addr = data_end; addr < page_end;
|
|
addr += 4, i += 4) {
|
|
|
|
if (addr == page_end-4) {
|
|
cmd_flags = BCE_NVM_COMMAND_LAST;
|
|
}
|
|
rc = bce_nvram_write_dword(sc, addr,
|
|
&flash_buffer[i], cmd_flags);
|
|
|
|
if (rc != 0)
|
|
goto bce_nvram_write_locked_exit;
|
|
|
|
cmd_flags = 0;
|
|
}
|
|
}
|
|
|
|
/* Disable writes to flash interface (lock write-protect) */
|
|
bce_disable_nvram_write(sc);
|
|
|
|
/* Disable access to flash interface */
|
|
bce_disable_nvram_access(sc);
|
|
bce_release_nvram_lock(sc);
|
|
|
|
/* Increment written */
|
|
written += data_end - data_start;
|
|
}
|
|
|
|
goto bce_nvram_write_exit;
|
|
|
|
bce_nvram_write_locked_exit:
|
|
bce_disable_nvram_write(sc);
|
|
bce_disable_nvram_access(sc);
|
|
bce_release_nvram_lock(sc);
|
|
|
|
bce_nvram_write_exit:
|
|
if (align_start || align_end)
|
|
free(buf, M_DEVBUF);
|
|
|
|
DBEXIT(BCE_VERBOSE_NVRAM);
|
|
return (rc);
|
|
}
|
|
#endif /* BCE_NVRAM_WRITE_SUPPORT */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Verifies that NVRAM is accessible and contains valid data. */
|
|
/* */
|
|
/* Reads the configuration data from NVRAM and verifies that the CRC is */
|
|
/* correct. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 on success, positive value on failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_nvram_test(struct bce_softc *sc)
|
|
{
|
|
u32 buf[BCE_NVRAM_SIZE / 4];
|
|
u8 *data = (u8 *) buf;
|
|
int rc = 0;
|
|
u32 magic, csum;
|
|
|
|
DBENTER(BCE_VERBOSE_NVRAM | BCE_VERBOSE_LOAD | BCE_VERBOSE_RESET);
|
|
|
|
/*
|
|
* Check that the device NVRAM is valid by reading
|
|
* the magic value at offset 0.
|
|
*/
|
|
if ((rc = bce_nvram_read(sc, 0, data, 4)) != 0) {
|
|
BCE_PRINTF("%s(%d): Unable to read NVRAM!\n", __FILE__, __LINE__);
|
|
goto bce_nvram_test_exit;
|
|
}
|
|
|
|
/*
|
|
* Verify that offset 0 of the NVRAM contains
|
|
* a valid magic number.
|
|
*/
|
|
magic = bce_be32toh(buf[0]);
|
|
if (magic != BCE_NVRAM_MAGIC) {
|
|
rc = ENODEV;
|
|
BCE_PRINTF("%s(%d): Invalid NVRAM magic value! Expected: 0x%08X, "
|
|
"Found: 0x%08X\n",
|
|
__FILE__, __LINE__, BCE_NVRAM_MAGIC, magic);
|
|
goto bce_nvram_test_exit;
|
|
}
|
|
|
|
/*
|
|
* Verify that the device NVRAM includes valid
|
|
* configuration data.
|
|
*/
|
|
if ((rc = bce_nvram_read(sc, 0x100, data, BCE_NVRAM_SIZE)) != 0) {
|
|
BCE_PRINTF("%s(%d): Unable to read Manufacturing Information from "
|
|
"NVRAM!\n", __FILE__, __LINE__);
|
|
goto bce_nvram_test_exit;
|
|
}
|
|
|
|
csum = ether_crc32_le(data, 0x100);
|
|
if (csum != BCE_CRC32_RESIDUAL) {
|
|
rc = ENODEV;
|
|
BCE_PRINTF("%s(%d): Invalid Manufacturing Information NVRAM CRC! "
|
|
"Expected: 0x%08X, Found: 0x%08X\n",
|
|
__FILE__, __LINE__, BCE_CRC32_RESIDUAL, csum);
|
|
goto bce_nvram_test_exit;
|
|
}
|
|
|
|
csum = ether_crc32_le(data + 0x100, 0x100);
|
|
if (csum != BCE_CRC32_RESIDUAL) {
|
|
rc = ENODEV;
|
|
BCE_PRINTF("%s(%d): Invalid Feature Configuration Information "
|
|
"NVRAM CRC! Expected: 0x%08X, Found: 08%08X\n",
|
|
__FILE__, __LINE__, BCE_CRC32_RESIDUAL, csum);
|
|
}
|
|
|
|
bce_nvram_test_exit:
|
|
DBEXIT(BCE_VERBOSE_NVRAM | BCE_VERBOSE_LOAD | BCE_VERBOSE_RESET);
|
|
return rc;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Identifies the current media type of the controller and sets the PHY */
|
|
/* address. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_get_media(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE);
|
|
|
|
/* Assume PHY address for copper controllers. */
|
|
sc->bce_phy_addr = 1;
|
|
|
|
if (BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) {
|
|
u32 val = REG_RD(sc, BCE_MISC_DUAL_MEDIA_CTRL);
|
|
u32 bond_id = val & BCE_MISC_DUAL_MEDIA_CTRL_BOND_ID;
|
|
u32 strap;
|
|
|
|
/*
|
|
* The BCM5709S is software configurable
|
|
* for Copper or SerDes operation.
|
|
*/
|
|
if (bond_id == BCE_MISC_DUAL_MEDIA_CTRL_BOND_ID_C) {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "5709 bonded for copper.\n");
|
|
goto bce_get_media_exit;
|
|
} else if (bond_id == BCE_MISC_DUAL_MEDIA_CTRL_BOND_ID_S) {
|
|
DBPRINT(sc, BCE_INFO_LOAD, "5709 bonded for dual media.\n");
|
|
sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG;
|
|
goto bce_get_media_exit;
|
|
}
|
|
|
|
if (val & BCE_MISC_DUAL_MEDIA_CTRL_STRAP_OVERRIDE)
|
|
strap = (val & BCE_MISC_DUAL_MEDIA_CTRL_PHY_CTRL) >> 21;
|
|
else
|
|
strap = (val & BCE_MISC_DUAL_MEDIA_CTRL_PHY_CTRL_STRAP) >> 8;
|
|
|
|
if (pci_get_function(sc->bce_dev) == 0) {
|
|
switch (strap) {
|
|
case 0x4:
|
|
case 0x5:
|
|
case 0x6:
|
|
DBPRINT(sc, BCE_INFO_LOAD,
|
|
"BCM5709 s/w configured for SerDes.\n");
|
|
sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG;
|
|
default:
|
|
DBPRINT(sc, BCE_INFO_LOAD,
|
|
"BCM5709 s/w configured for Copper.\n");
|
|
}
|
|
} else {
|
|
switch (strap) {
|
|
case 0x1:
|
|
case 0x2:
|
|
case 0x4:
|
|
DBPRINT(sc, BCE_INFO_LOAD,
|
|
"BCM5709 s/w configured for SerDes.\n");
|
|
sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG;
|
|
default:
|
|
DBPRINT(sc, BCE_INFO_LOAD,
|
|
"BCM5709 s/w configured for Copper.\n");
|
|
}
|
|
}
|
|
|
|
} else if (BCE_CHIP_BOND_ID(sc) & BCE_CHIP_BOND_ID_SERDES_BIT)
|
|
sc->bce_phy_flags |= BCE_PHY_SERDES_FLAG;
|
|
|
|
if (sc->bce_phy_flags & BCE_PHY_SERDES_FLAG) {
|
|
sc->bce_flags |= BCE_NO_WOL_FLAG;
|
|
if (BCE_CHIP_NUM(sc) != BCE_CHIP_NUM_5706) {
|
|
sc->bce_phy_addr = 2;
|
|
val = REG_RD_IND(sc, sc->bce_shmem_base +
|
|
BCE_SHARED_HW_CFG_CONFIG);
|
|
if (val & BCE_SHARED_HW_CFG_PHY_2_5G) {
|
|
sc->bce_phy_flags |= BCE_PHY_2_5G_CAPABLE_FLAG;
|
|
DBPRINT(sc, BCE_INFO_LOAD, "Found 2.5Gb capable adapter\n");
|
|
}
|
|
}
|
|
} else if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5708))
|
|
sc->bce_phy_flags |= BCE_PHY_CRC_FIX_FLAG;
|
|
|
|
bce_get_media_exit:
|
|
DBPRINT(sc, (BCE_INFO_LOAD | BCE_INFO_PHY),
|
|
"Using PHY address %d.\n", sc->bce_phy_addr);
|
|
|
|
DBEXIT(BCE_VERBOSE);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Free any DMA memory owned by the driver. */
|
|
/* */
|
|
/* Scans through each data structre that requires DMA memory and frees */
|
|
/* the memory if allocated. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_dma_free(struct bce_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_UNLOAD | BCE_VERBOSE_CTX);
|
|
|
|
/* Free, unmap, and destroy the status block. */
|
|
if (sc->status_block != NULL) {
|
|
bus_dmamem_free(
|
|
sc->status_tag,
|
|
sc->status_block,
|
|
sc->status_map);
|
|
sc->status_block = NULL;
|
|
}
|
|
|
|
if (sc->status_map != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->status_tag,
|
|
sc->status_map);
|
|
bus_dmamap_destroy(sc->status_tag,
|
|
sc->status_map);
|
|
sc->status_map = NULL;
|
|
}
|
|
|
|
if (sc->status_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->status_tag);
|
|
sc->status_tag = NULL;
|
|
}
|
|
|
|
|
|
/* Free, unmap, and destroy the statistics block. */
|
|
if (sc->stats_block != NULL) {
|
|
bus_dmamem_free(
|
|
sc->stats_tag,
|
|
sc->stats_block,
|
|
sc->stats_map);
|
|
sc->stats_block = NULL;
|
|
}
|
|
|
|
if (sc->stats_map != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->stats_tag,
|
|
sc->stats_map);
|
|
bus_dmamap_destroy(sc->stats_tag,
|
|
sc->stats_map);
|
|
sc->stats_map = NULL;
|
|
}
|
|
|
|
if (sc->stats_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->stats_tag);
|
|
sc->stats_tag = NULL;
|
|
}
|
|
|
|
|
|
/* Free, unmap and destroy all context memory pages. */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
for (i = 0; i < sc->ctx_pages; i++ ) {
|
|
if (sc->ctx_block[i] != NULL) {
|
|
bus_dmamem_free(
|
|
sc->ctx_tag,
|
|
sc->ctx_block[i],
|
|
sc->ctx_map[i]);
|
|
sc->ctx_block[i] = NULL;
|
|
}
|
|
|
|
if (sc->ctx_map[i] != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->ctx_tag,
|
|
sc->ctx_map[i]);
|
|
bus_dmamap_destroy(
|
|
sc->ctx_tag,
|
|
sc->ctx_map[i]);
|
|
sc->ctx_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the context memory tag. */
|
|
if (sc->ctx_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->ctx_tag);
|
|
sc->ctx_tag = NULL;
|
|
}
|
|
}
|
|
|
|
|
|
/* Free, unmap and destroy all TX buffer descriptor chain pages. */
|
|
for (i = 0; i < TX_PAGES; i++ ) {
|
|
if (sc->tx_bd_chain[i] != NULL) {
|
|
bus_dmamem_free(
|
|
sc->tx_bd_chain_tag,
|
|
sc->tx_bd_chain[i],
|
|
sc->tx_bd_chain_map[i]);
|
|
sc->tx_bd_chain[i] = NULL;
|
|
}
|
|
|
|
if (sc->tx_bd_chain_map[i] != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->tx_bd_chain_tag,
|
|
sc->tx_bd_chain_map[i]);
|
|
bus_dmamap_destroy(
|
|
sc->tx_bd_chain_tag,
|
|
sc->tx_bd_chain_map[i]);
|
|
sc->tx_bd_chain_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the TX buffer descriptor tag. */
|
|
if (sc->tx_bd_chain_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->tx_bd_chain_tag);
|
|
sc->tx_bd_chain_tag = NULL;
|
|
}
|
|
|
|
|
|
/* Free, unmap and destroy all RX buffer descriptor chain pages. */
|
|
for (i = 0; i < RX_PAGES; i++ ) {
|
|
if (sc->rx_bd_chain[i] != NULL) {
|
|
bus_dmamem_free(
|
|
sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain[i],
|
|
sc->rx_bd_chain_map[i]);
|
|
sc->rx_bd_chain[i] = NULL;
|
|
}
|
|
|
|
if (sc->rx_bd_chain_map[i] != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i]);
|
|
bus_dmamap_destroy(
|
|
sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i]);
|
|
sc->rx_bd_chain_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the RX buffer descriptor tag. */
|
|
if (sc->rx_bd_chain_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->rx_bd_chain_tag);
|
|
sc->rx_bd_chain_tag = NULL;
|
|
}
|
|
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/* Free, unmap and destroy all page buffer descriptor chain pages. */
|
|
for (i = 0; i < PG_PAGES; i++ ) {
|
|
if (sc->pg_bd_chain[i] != NULL) {
|
|
bus_dmamem_free(
|
|
sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain[i],
|
|
sc->pg_bd_chain_map[i]);
|
|
sc->pg_bd_chain[i] = NULL;
|
|
}
|
|
|
|
if (sc->pg_bd_chain_map[i] != NULL) {
|
|
bus_dmamap_unload(
|
|
sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i]);
|
|
bus_dmamap_destroy(
|
|
sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i]);
|
|
sc->pg_bd_chain_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the page buffer descriptor tag. */
|
|
if (sc->pg_bd_chain_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->pg_bd_chain_tag);
|
|
sc->pg_bd_chain_tag = NULL;
|
|
}
|
|
#endif
|
|
|
|
|
|
/* Unload and destroy the TX mbuf maps. */
|
|
for (i = 0; i < TOTAL_TX_BD; i++) {
|
|
if (sc->tx_mbuf_map[i] != NULL) {
|
|
bus_dmamap_unload(sc->tx_mbuf_tag,
|
|
sc->tx_mbuf_map[i]);
|
|
bus_dmamap_destroy(sc->tx_mbuf_tag,
|
|
sc->tx_mbuf_map[i]);
|
|
sc->tx_mbuf_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the TX mbuf tag. */
|
|
if (sc->tx_mbuf_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->tx_mbuf_tag);
|
|
sc->tx_mbuf_tag = NULL;
|
|
}
|
|
|
|
/* Unload and destroy the RX mbuf maps. */
|
|
for (i = 0; i < TOTAL_RX_BD; i++) {
|
|
if (sc->rx_mbuf_map[i] != NULL) {
|
|
bus_dmamap_unload(sc->rx_mbuf_tag,
|
|
sc->rx_mbuf_map[i]);
|
|
bus_dmamap_destroy(sc->rx_mbuf_tag,
|
|
sc->rx_mbuf_map[i]);
|
|
sc->rx_mbuf_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the RX mbuf tag. */
|
|
if (sc->rx_mbuf_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->rx_mbuf_tag);
|
|
sc->rx_mbuf_tag = NULL;
|
|
}
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/* Unload and destroy the page mbuf maps. */
|
|
for (i = 0; i < TOTAL_PG_BD; i++) {
|
|
if (sc->pg_mbuf_map[i] != NULL) {
|
|
bus_dmamap_unload(sc->pg_mbuf_tag,
|
|
sc->pg_mbuf_map[i]);
|
|
bus_dmamap_destroy(sc->pg_mbuf_tag,
|
|
sc->pg_mbuf_map[i]);
|
|
sc->pg_mbuf_map[i] = NULL;
|
|
}
|
|
}
|
|
|
|
/* Destroy the page mbuf tag. */
|
|
if (sc->pg_mbuf_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->pg_mbuf_tag);
|
|
sc->pg_mbuf_tag = NULL;
|
|
}
|
|
#endif
|
|
|
|
/* Destroy the parent tag */
|
|
if (sc->parent_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->parent_tag);
|
|
sc->parent_tag = NULL;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_UNLOAD | BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Get DMA memory from the OS. */
|
|
/* */
|
|
/* Validates that the OS has provided DMA buffers in response to a */
|
|
/* bus_dmamap_load() call and saves the physical address of those buffers. */
|
|
/* When the callback is used the OS will return 0 for the mapping function */
|
|
/* (bus_dmamap_load()) so we use the value of map_arg->maxsegs to pass any */
|
|
/* failures back to the caller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
bus_addr_t *busaddr = arg;
|
|
|
|
/* Simulate a mapping failure. */
|
|
DBRUNIF(DB_RANDOMTRUE(bce_debug_dma_map_addr_failure),
|
|
printf("bce: %s(%d): Simulating DMA mapping error.\n",
|
|
__FILE__, __LINE__);
|
|
error = ENOMEM);
|
|
|
|
/* Check for an error and signal the caller that an error occurred. */
|
|
if (error) {
|
|
printf("bce %s(%d): DMA mapping error! error = %d, "
|
|
"nseg = %d\n", __FILE__, __LINE__, error, nseg);
|
|
*busaddr = 0;
|
|
return;
|
|
}
|
|
|
|
*busaddr = segs->ds_addr;
|
|
return;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allocate any DMA memory needed by the driver. */
|
|
/* */
|
|
/* Allocates DMA memory needed for the various global structures needed by */
|
|
/* hardware. */
|
|
/* */
|
|
/* Memory alignment requirements: */
|
|
/* +-----------------+----------+----------+----------+----------+ */
|
|
/* | | 5706 | 5708 | 5709 | 5716 | */
|
|
/* +-----------------+----------+----------+----------+----------+ */
|
|
/* |Status Block | 8 bytes | 8 bytes | 16 bytes | 16 bytes | */
|
|
/* |Statistics Block | 8 bytes | 8 bytes | 16 bytes | 16 bytes | */
|
|
/* |RX Buffers | 16 bytes | 16 bytes | 16 bytes | 16 bytes | */
|
|
/* |PG Buffers | none | none | none | none | */
|
|
/* |TX Buffers | none | none | none | none | */
|
|
/* |Chain Pages(1) | 4KiB | 4KiB | 4KiB | 4KiB | */
|
|
/* +-----------------+----------+----------+----------+----------+ */
|
|
/* */
|
|
/* (1) Must align with CPU page size (BCM_PAGE_SZIE). */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_dma_alloc(device_t dev)
|
|
{
|
|
struct bce_softc *sc;
|
|
int i, error, rc = 0;
|
|
bus_addr_t busaddr;
|
|
bus_size_t max_size, max_seg_size;
|
|
int max_segments;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_CTX);
|
|
|
|
/*
|
|
* Allocate the parent bus DMA tag appropriate for PCI.
|
|
*/
|
|
if (bus_dma_tag_create(NULL,
|
|
1,
|
|
BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL, NULL,
|
|
MAXBSIZE,
|
|
BUS_SPACE_UNRESTRICTED,
|
|
BUS_SPACE_MAXSIZE_32BIT,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->parent_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate parent DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for the status block, allocate and clear the
|
|
* memory, map the memory into DMA space, and fetch the physical
|
|
* address of the block.
|
|
*/
|
|
if (bus_dma_tag_create(sc->parent_tag,
|
|
BCE_DMA_ALIGN,
|
|
BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL, NULL,
|
|
BCE_STATUS_BLK_SZ,
|
|
1,
|
|
BCE_STATUS_BLK_SZ,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->status_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate status block DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
if(bus_dmamem_alloc(sc->status_tag,
|
|
(void **)&sc->status_block,
|
|
BUS_DMA_NOWAIT,
|
|
&sc->status_map)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate status block DMA memory!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
bzero((char *)sc->status_block, BCE_STATUS_BLK_SZ);
|
|
|
|
error = bus_dmamap_load(sc->status_tag,
|
|
sc->status_map,
|
|
sc->status_block,
|
|
BCE_STATUS_BLK_SZ,
|
|
bce_dma_map_addr,
|
|
&busaddr,
|
|
BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map status block DMA memory!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
sc->status_block_paddr = busaddr;
|
|
DBPRINT(sc, BCE_INFO, "%s(): status_block_paddr = 0x%jX\n",
|
|
__FUNCTION__, (uintmax_t) sc->status_block_paddr);
|
|
|
|
/*
|
|
* Create a DMA tag for the statistics block, allocate and clear the
|
|
* memory, map the memory into DMA space, and fetch the physical
|
|
* address of the block.
|
|
*/
|
|
if (bus_dma_tag_create(sc->parent_tag,
|
|
BCE_DMA_ALIGN,
|
|
BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL, NULL,
|
|
BCE_STATS_BLK_SZ,
|
|
1,
|
|
BCE_STATS_BLK_SZ,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->stats_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate statistics block DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
if (bus_dmamem_alloc(sc->stats_tag,
|
|
(void **)&sc->stats_block,
|
|
BUS_DMA_NOWAIT,
|
|
&sc->stats_map)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate statistics block DMA memory!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
bzero((char *)sc->stats_block, BCE_STATS_BLK_SZ);
|
|
|
|
error = bus_dmamap_load(sc->stats_tag,
|
|
sc->stats_map,
|
|
sc->stats_block,
|
|
BCE_STATS_BLK_SZ,
|
|
bce_dma_map_addr,
|
|
&busaddr,
|
|
BUS_DMA_NOWAIT);
|
|
|
|
if(error) {
|
|
BCE_PRINTF("%s(%d): Could not map statistics block DMA memory!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
sc->stats_block_paddr = busaddr;
|
|
DBPRINT(sc, BCE_INFO, "%s(): stats_block_paddr = 0x%jX\n",
|
|
__FUNCTION__, (uintmax_t) sc->stats_block_paddr);
|
|
|
|
/* BCM5709 uses host memory as cache for context memory. */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
sc->ctx_pages = 0x2000 / BCM_PAGE_SIZE;
|
|
if (sc->ctx_pages == 0)
|
|
sc->ctx_pages = 1;
|
|
|
|
DBRUNIF((sc->ctx_pages > 512),
|
|
BCE_PRINTF("%s(%d): Too many CTX pages! %d > 512\n",
|
|
__FILE__, __LINE__, sc->ctx_pages));
|
|
|
|
/*
|
|
* Create a DMA tag for the context pages,
|
|
* allocate and clear the memory, map the
|
|
* memory into DMA space, and fetch the
|
|
* physical address of the block.
|
|
*/
|
|
if(bus_dma_tag_create(sc->parent_tag,
|
|
BCM_PAGE_SIZE,
|
|
BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL, NULL,
|
|
BCM_PAGE_SIZE,
|
|
1,
|
|
BCM_PAGE_SIZE,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->ctx_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate CTX DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
for (i = 0; i < sc->ctx_pages; i++) {
|
|
|
|
if(bus_dmamem_alloc(sc->ctx_tag,
|
|
(void **)&sc->ctx_block[i],
|
|
BUS_DMA_NOWAIT,
|
|
&sc->ctx_map[i])) {
|
|
BCE_PRINTF("%s(%d): Could not allocate CTX "
|
|
"DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
bzero((char *)sc->ctx_block[i], BCM_PAGE_SIZE);
|
|
|
|
error = bus_dmamap_load(sc->ctx_tag,
|
|
sc->ctx_map[i],
|
|
sc->ctx_block[i],
|
|
BCM_PAGE_SIZE,
|
|
bce_dma_map_addr,
|
|
&busaddr,
|
|
BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map CTX DMA memory!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
sc->ctx_paddr[i] = busaddr;
|
|
DBPRINT(sc, BCE_INFO, "%s(): ctx_paddr[%d] = 0x%jX\n",
|
|
__FUNCTION__, i, (uintmax_t) sc->ctx_paddr[i]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for the TX buffer descriptor chain,
|
|
* allocate and clear the memory, and fetch the
|
|
* physical address of the block.
|
|
*/
|
|
if(bus_dma_tag_create(sc->parent_tag,
|
|
BCM_PAGE_SIZE,
|
|
BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL, NULL,
|
|
BCE_TX_CHAIN_PAGE_SZ,
|
|
1,
|
|
BCE_TX_CHAIN_PAGE_SZ,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->tx_bd_chain_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate TX descriptor chain DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
for (i = 0; i < TX_PAGES; i++) {
|
|
|
|
if(bus_dmamem_alloc(sc->tx_bd_chain_tag,
|
|
(void **)&sc->tx_bd_chain[i],
|
|
BUS_DMA_NOWAIT,
|
|
&sc->tx_bd_chain_map[i])) {
|
|
BCE_PRINTF("%s(%d): Could not allocate TX descriptor "
|
|
"chain DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
error = bus_dmamap_load(sc->tx_bd_chain_tag,
|
|
sc->tx_bd_chain_map[i],
|
|
sc->tx_bd_chain[i],
|
|
BCE_TX_CHAIN_PAGE_SZ,
|
|
bce_dma_map_addr,
|
|
&busaddr,
|
|
BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map TX descriptor chain DMA memory!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
sc->tx_bd_chain_paddr[i] = busaddr;
|
|
DBPRINT(sc, BCE_INFO, "%s(): tx_bd_chain_paddr[%d] = 0x%jX\n",
|
|
__FUNCTION__, i, (uintmax_t) sc->tx_bd_chain_paddr[i]);
|
|
}
|
|
|
|
/* Check the required size before mapping to conserve resources. */
|
|
if (bce_tso_enable) {
|
|
max_size = BCE_TSO_MAX_SIZE;
|
|
max_segments = BCE_MAX_SEGMENTS;
|
|
max_seg_size = BCE_TSO_MAX_SEG_SIZE;
|
|
} else {
|
|
max_size = MCLBYTES * BCE_MAX_SEGMENTS;
|
|
max_segments = BCE_MAX_SEGMENTS;
|
|
max_seg_size = MCLBYTES;
|
|
}
|
|
|
|
/* Create a DMA tag for TX mbufs. */
|
|
if (bus_dma_tag_create(sc->parent_tag,
|
|
1,
|
|
BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL, NULL,
|
|
max_size,
|
|
max_segments,
|
|
max_seg_size,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->tx_mbuf_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate TX mbuf DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
/* Create DMA maps for the TX mbufs clusters. */
|
|
for (i = 0; i < TOTAL_TX_BD; i++) {
|
|
if (bus_dmamap_create(sc->tx_mbuf_tag, BUS_DMA_NOWAIT,
|
|
&sc->tx_mbuf_map[i])) {
|
|
BCE_PRINTF("%s(%d): Unable to create TX mbuf DMA map!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for the RX buffer descriptor chain,
|
|
* allocate and clear the memory, and fetch the physical
|
|
* address of the blocks.
|
|
*/
|
|
if (bus_dma_tag_create(sc->parent_tag,
|
|
BCM_PAGE_SIZE,
|
|
BCE_DMA_BOUNDARY,
|
|
BUS_SPACE_MAXADDR,
|
|
sc->max_bus_addr,
|
|
NULL, NULL,
|
|
BCE_RX_CHAIN_PAGE_SZ,
|
|
1,
|
|
BCE_RX_CHAIN_PAGE_SZ,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->rx_bd_chain_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate RX descriptor chain DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
for (i = 0; i < RX_PAGES; i++) {
|
|
|
|
if (bus_dmamem_alloc(sc->rx_bd_chain_tag,
|
|
(void **)&sc->rx_bd_chain[i],
|
|
BUS_DMA_NOWAIT,
|
|
&sc->rx_bd_chain_map[i])) {
|
|
BCE_PRINTF("%s(%d): Could not allocate RX descriptor chain "
|
|
"DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
bzero((char *)sc->rx_bd_chain[i], BCE_RX_CHAIN_PAGE_SZ);
|
|
|
|
error = bus_dmamap_load(sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i],
|
|
sc->rx_bd_chain[i],
|
|
BCE_RX_CHAIN_PAGE_SZ,
|
|
bce_dma_map_addr,
|
|
&busaddr,
|
|
BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map RX descriptor chain DMA memory!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
sc->rx_bd_chain_paddr[i] = busaddr;
|
|
DBPRINT(sc, BCE_INFO, "%s(): rx_bd_chain_paddr[%d] = 0x%jX\n",
|
|
__FUNCTION__, i, (uintmax_t) sc->rx_bd_chain_paddr[i]);
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for RX mbufs.
|
|
*/
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
max_size = max_seg_size = ((sc->rx_bd_mbuf_alloc_size < MCLBYTES) ?
|
|
MCLBYTES : sc->rx_bd_mbuf_alloc_size);
|
|
#else
|
|
max_size = max_seg_size = MJUM9BYTES;
|
|
#endif
|
|
|
|
if (bus_dma_tag_create(sc->parent_tag,
|
|
1,
|
|
BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL, NULL,
|
|
max_size,
|
|
1,
|
|
max_seg_size,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->rx_mbuf_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate RX mbuf DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
/* Create DMA maps for the RX mbuf clusters. */
|
|
for (i = 0; i < TOTAL_RX_BD; i++) {
|
|
if (bus_dmamap_create(sc->rx_mbuf_tag, BUS_DMA_NOWAIT,
|
|
&sc->rx_mbuf_map[i])) {
|
|
BCE_PRINTF("%s(%d): Unable to create RX mbuf DMA map!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
}
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/*
|
|
* Create a DMA tag for the page buffer descriptor chain,
|
|
* allocate and clear the memory, and fetch the physical
|
|
* address of the blocks.
|
|
*/
|
|
if (bus_dma_tag_create(sc->parent_tag,
|
|
BCM_PAGE_SIZE,
|
|
BCE_DMA_BOUNDARY,
|
|
BUS_SPACE_MAXADDR,
|
|
sc->max_bus_addr,
|
|
NULL, NULL,
|
|
BCE_PG_CHAIN_PAGE_SZ,
|
|
1,
|
|
BCE_PG_CHAIN_PAGE_SZ,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->pg_bd_chain_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate page descriptor chain DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
for (i = 0; i < PG_PAGES; i++) {
|
|
|
|
if (bus_dmamem_alloc(sc->pg_bd_chain_tag,
|
|
(void **)&sc->pg_bd_chain[i],
|
|
BUS_DMA_NOWAIT,
|
|
&sc->pg_bd_chain_map[i])) {
|
|
BCE_PRINTF("%s(%d): Could not allocate page descriptor chain "
|
|
"DMA memory!\n", __FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
bzero((char *)sc->pg_bd_chain[i], BCE_PG_CHAIN_PAGE_SZ);
|
|
|
|
error = bus_dmamap_load(sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i],
|
|
sc->pg_bd_chain[i],
|
|
BCE_PG_CHAIN_PAGE_SZ,
|
|
bce_dma_map_addr,
|
|
&busaddr,
|
|
BUS_DMA_NOWAIT);
|
|
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Could not map page descriptor chain DMA memory!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
sc->pg_bd_chain_paddr[i] = busaddr;
|
|
DBPRINT(sc, BCE_INFO, "%s(): pg_bd_chain_paddr[%d] = 0x%jX\n",
|
|
__FUNCTION__, i, (uintmax_t) sc->pg_bd_chain_paddr[i]);
|
|
}
|
|
|
|
/*
|
|
* Create a DMA tag for page mbufs.
|
|
*/
|
|
max_size = max_seg_size = ((sc->pg_bd_mbuf_alloc_size < MCLBYTES) ?
|
|
MCLBYTES : sc->pg_bd_mbuf_alloc_size);
|
|
|
|
if (bus_dma_tag_create(sc->parent_tag,
|
|
1,
|
|
BCE_DMA_BOUNDARY,
|
|
sc->max_bus_addr,
|
|
BUS_SPACE_MAXADDR,
|
|
NULL, NULL,
|
|
max_size,
|
|
1,
|
|
max_seg_size,
|
|
0,
|
|
NULL, NULL,
|
|
&sc->pg_mbuf_tag)) {
|
|
BCE_PRINTF("%s(%d): Could not allocate page mbuf DMA tag!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
|
|
/* Create DMA maps for the page mbuf clusters. */
|
|
for (i = 0; i < TOTAL_PG_BD; i++) {
|
|
if (bus_dmamap_create(sc->pg_mbuf_tag, BUS_DMA_NOWAIT,
|
|
&sc->pg_mbuf_map[i])) {
|
|
BCE_PRINTF("%s(%d): Unable to create page mbuf DMA map!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENOMEM;
|
|
goto bce_dma_alloc_exit;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
bce_dma_alloc_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_CTX);
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Release all resources used by the driver. */
|
|
/* */
|
|
/* Releases all resources acquired by the driver including interrupts, */
|
|
/* interrupt handler, interfaces, mutexes, and DMA memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_release_resources(struct bce_softc *sc)
|
|
{
|
|
device_t dev;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
dev = sc->bce_dev;
|
|
|
|
bce_dma_free(sc);
|
|
|
|
if (sc->bce_intrhand != NULL) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Removing interrupt handler.\n");
|
|
bus_teardown_intr(dev, sc->bce_res_irq, sc->bce_intrhand);
|
|
}
|
|
|
|
if (sc->bce_res_irq != NULL) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Releasing IRQ.\n");
|
|
bus_release_resource(dev, SYS_RES_IRQ, sc->bce_irq_rid,
|
|
sc->bce_res_irq);
|
|
}
|
|
|
|
if (sc->bce_flags & (BCE_USING_MSI_FLAG | BCE_USING_MSIX_FLAG)) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Releasing MSI/MSI-X vector.\n");
|
|
pci_release_msi(dev);
|
|
}
|
|
|
|
if (sc->bce_res_mem != NULL) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Releasing PCI memory.\n");
|
|
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BAR(0), sc->bce_res_mem);
|
|
}
|
|
|
|
if (sc->bce_ifp != NULL) {
|
|
DBPRINT(sc, BCE_INFO_RESET, "Releasing IF.\n");
|
|
if_free(sc->bce_ifp);
|
|
}
|
|
|
|
if (mtx_initialized(&sc->bce_mtx))
|
|
BCE_LOCK_DESTROY(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Firmware synchronization. */
|
|
/* */
|
|
/* Before performing certain events such as a chip reset, synchronize with */
|
|
/* the firmware first. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_fw_sync(struct bce_softc *sc, u32 msg_data)
|
|
{
|
|
int i, rc = 0;
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/* Don't waste any time if we've timed out before. */
|
|
if (sc->bce_fw_timed_out) {
|
|
rc = EBUSY;
|
|
goto bce_fw_sync_exit;
|
|
}
|
|
|
|
/* Increment the message sequence number. */
|
|
sc->bce_fw_wr_seq++;
|
|
msg_data |= sc->bce_fw_wr_seq;
|
|
|
|
DBPRINT(sc, BCE_VERBOSE_FIRMWARE, "bce_fw_sync(): msg_data = 0x%08X\n",
|
|
msg_data);
|
|
|
|
/* Send the message to the bootcode driver mailbox. */
|
|
REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_MB, msg_data);
|
|
|
|
/* Wait for the bootcode to acknowledge the message. */
|
|
for (i = 0; i < FW_ACK_TIME_OUT_MS; i++) {
|
|
/* Check for a response in the bootcode firmware mailbox. */
|
|
val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_FW_MB);
|
|
if ((val & BCE_FW_MSG_ACK) == (msg_data & BCE_DRV_MSG_SEQ))
|
|
break;
|
|
DELAY(1000);
|
|
}
|
|
|
|
/* If we've timed out, tell the bootcode that we've stopped waiting. */
|
|
if (((val & BCE_FW_MSG_ACK) != (msg_data & BCE_DRV_MSG_SEQ)) &&
|
|
((msg_data & BCE_DRV_MSG_DATA) != BCE_DRV_MSG_DATA_WAIT0)) {
|
|
|
|
BCE_PRINTF("%s(%d): Firmware synchronization timeout! "
|
|
"msg_data = 0x%08X\n",
|
|
__FILE__, __LINE__, msg_data);
|
|
|
|
msg_data &= ~BCE_DRV_MSG_CODE;
|
|
msg_data |= BCE_DRV_MSG_CODE_FW_TIMEOUT;
|
|
|
|
REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_MB, msg_data);
|
|
|
|
sc->bce_fw_timed_out = 1;
|
|
rc = EBUSY;
|
|
}
|
|
|
|
bce_fw_sync_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Load Receive Virtual 2 Physical (RV2P) processor firmware. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_load_rv2p_fw(struct bce_softc *sc, u32 *rv2p_code,
|
|
u32 rv2p_code_len, u32 rv2p_proc)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/* Set the page size used by RV2P. */
|
|
if (rv2p_proc == RV2P_PROC2) {
|
|
BCE_RV2P_PROC2_CHG_MAX_BD_PAGE(USABLE_RX_BD_PER_PAGE);
|
|
}
|
|
|
|
for (i = 0; i < rv2p_code_len; i += 8) {
|
|
REG_WR(sc, BCE_RV2P_INSTR_HIGH, *rv2p_code);
|
|
rv2p_code++;
|
|
REG_WR(sc, BCE_RV2P_INSTR_LOW, *rv2p_code);
|
|
rv2p_code++;
|
|
|
|
if (rv2p_proc == RV2P_PROC1) {
|
|
val = (i / 8) | BCE_RV2P_PROC1_ADDR_CMD_RDWR;
|
|
REG_WR(sc, BCE_RV2P_PROC1_ADDR_CMD, val);
|
|
}
|
|
else {
|
|
val = (i / 8) | BCE_RV2P_PROC2_ADDR_CMD_RDWR;
|
|
REG_WR(sc, BCE_RV2P_PROC2_ADDR_CMD, val);
|
|
}
|
|
}
|
|
|
|
/* Reset the processor, un-stall is done later. */
|
|
if (rv2p_proc == RV2P_PROC1) {
|
|
REG_WR(sc, BCE_RV2P_COMMAND, BCE_RV2P_COMMAND_PROC1_RESET);
|
|
}
|
|
else {
|
|
REG_WR(sc, BCE_RV2P_COMMAND, BCE_RV2P_COMMAND_PROC2_RESET);
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Load RISC processor firmware. */
|
|
/* */
|
|
/* Loads firmware from the file if_bcefw.h into the scratchpad memory */
|
|
/* associated with a particular processor. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_load_cpu_fw(struct bce_softc *sc, struct cpu_reg *cpu_reg,
|
|
struct fw_info *fw)
|
|
{
|
|
u32 offset;
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/* Halt the CPU. */
|
|
val = REG_RD_IND(sc, cpu_reg->mode);
|
|
val |= cpu_reg->mode_value_halt;
|
|
REG_WR_IND(sc, cpu_reg->mode, val);
|
|
REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear);
|
|
|
|
/* Load the Text area. */
|
|
offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base);
|
|
if (fw->text) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->text_len / 4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->text[j]);
|
|
}
|
|
}
|
|
|
|
/* Load the Data area. */
|
|
offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base);
|
|
if (fw->data) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->data_len / 4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->data[j]);
|
|
}
|
|
}
|
|
|
|
/* Load the SBSS area. */
|
|
offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base);
|
|
if (fw->sbss) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->sbss[j]);
|
|
}
|
|
}
|
|
|
|
/* Load the BSS area. */
|
|
offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base);
|
|
if (fw->bss) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->bss_len/4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->bss[j]);
|
|
}
|
|
}
|
|
|
|
/* Load the Read-Only area. */
|
|
offset = cpu_reg->spad_base +
|
|
(fw->rodata_addr - cpu_reg->mips_view_base);
|
|
if (fw->rodata) {
|
|
int j;
|
|
|
|
for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) {
|
|
REG_WR_IND(sc, offset, fw->rodata[j]);
|
|
}
|
|
}
|
|
|
|
/* Clear the pre-fetch instruction. */
|
|
REG_WR_IND(sc, cpu_reg->inst, 0);
|
|
REG_WR_IND(sc, cpu_reg->pc, fw->start_addr);
|
|
|
|
/* Start the CPU. */
|
|
val = REG_RD_IND(sc, cpu_reg->mode);
|
|
val &= ~cpu_reg->mode_value_halt;
|
|
REG_WR_IND(sc, cpu_reg->state, cpu_reg->state_value_clear);
|
|
REG_WR_IND(sc, cpu_reg->mode, val);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the RX CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_rxp_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_RXP_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_RXP_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_RXP_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_RXP_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_RXP_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_RXP_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_RXP_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_RXP_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_RXP_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_RXP_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
fw.ver_major = bce_RXP_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_RXP_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_RXP_b09FwReleaseFix;
|
|
fw.start_addr = bce_RXP_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_RXP_b09FwTextAddr;
|
|
fw.text_len = bce_RXP_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_RXP_b09FwText;
|
|
|
|
fw.data_addr = bce_RXP_b09FwDataAddr;
|
|
fw.data_len = bce_RXP_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_RXP_b09FwData;
|
|
|
|
fw.sbss_addr = bce_RXP_b09FwSbssAddr;
|
|
fw.sbss_len = bce_RXP_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_RXP_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_RXP_b09FwBssAddr;
|
|
fw.bss_len = bce_RXP_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_RXP_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_RXP_b09FwRodataAddr;
|
|
fw.rodata_len = bce_RXP_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_RXP_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_RXP_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_RXP_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_RXP_b06FwReleaseFix;
|
|
fw.start_addr = bce_RXP_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_RXP_b06FwTextAddr;
|
|
fw.text_len = bce_RXP_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_RXP_b06FwText;
|
|
|
|
fw.data_addr = bce_RXP_b06FwDataAddr;
|
|
fw.data_len = bce_RXP_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_RXP_b06FwData;
|
|
|
|
fw.sbss_addr = bce_RXP_b06FwSbssAddr;
|
|
fw.sbss_len = bce_RXP_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_RXP_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_RXP_b06FwBssAddr;
|
|
fw.bss_len = bce_RXP_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_RXP_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_RXP_b06FwRodataAddr;
|
|
fw.rodata_len = bce_RXP_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_RXP_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading RX firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the TX CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_txp_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_TXP_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_TXP_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_TXP_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_TXP_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_TXP_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_TXP_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_TXP_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_TXP_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_TXP_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_TXP_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
fw.ver_major = bce_TXP_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_TXP_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_TXP_b09FwReleaseFix;
|
|
fw.start_addr = bce_TXP_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_TXP_b09FwTextAddr;
|
|
fw.text_len = bce_TXP_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_TXP_b09FwText;
|
|
|
|
fw.data_addr = bce_TXP_b09FwDataAddr;
|
|
fw.data_len = bce_TXP_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_TXP_b09FwData;
|
|
|
|
fw.sbss_addr = bce_TXP_b09FwSbssAddr;
|
|
fw.sbss_len = bce_TXP_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_TXP_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_TXP_b09FwBssAddr;
|
|
fw.bss_len = bce_TXP_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_TXP_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_TXP_b09FwRodataAddr;
|
|
fw.rodata_len = bce_TXP_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_TXP_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_TXP_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_TXP_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_TXP_b06FwReleaseFix;
|
|
fw.start_addr = bce_TXP_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_TXP_b06FwTextAddr;
|
|
fw.text_len = bce_TXP_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_TXP_b06FwText;
|
|
|
|
fw.data_addr = bce_TXP_b06FwDataAddr;
|
|
fw.data_len = bce_TXP_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_TXP_b06FwData;
|
|
|
|
fw.sbss_addr = bce_TXP_b06FwSbssAddr;
|
|
fw.sbss_len = bce_TXP_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_TXP_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_TXP_b06FwBssAddr;
|
|
fw.bss_len = bce_TXP_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_TXP_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_TXP_b06FwRodataAddr;
|
|
fw.rodata_len = bce_TXP_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_TXP_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading TX firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the TPAT CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_tpat_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_TPAT_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_TPAT_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_TPAT_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_TPAT_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_TPAT_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_TPAT_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_TPAT_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_TPAT_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_TPAT_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_TPAT_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
fw.ver_major = bce_TPAT_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_TPAT_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_TPAT_b09FwReleaseFix;
|
|
fw.start_addr = bce_TPAT_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_TPAT_b09FwTextAddr;
|
|
fw.text_len = bce_TPAT_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_TPAT_b09FwText;
|
|
|
|
fw.data_addr = bce_TPAT_b09FwDataAddr;
|
|
fw.data_len = bce_TPAT_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_TPAT_b09FwData;
|
|
|
|
fw.sbss_addr = bce_TPAT_b09FwSbssAddr;
|
|
fw.sbss_len = bce_TPAT_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_TPAT_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_TPAT_b09FwBssAddr;
|
|
fw.bss_len = bce_TPAT_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_TPAT_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_TPAT_b09FwRodataAddr;
|
|
fw.rodata_len = bce_TPAT_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_TPAT_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_TPAT_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_TPAT_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_TPAT_b06FwReleaseFix;
|
|
fw.start_addr = bce_TPAT_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_TPAT_b06FwTextAddr;
|
|
fw.text_len = bce_TPAT_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_TPAT_b06FwText;
|
|
|
|
fw.data_addr = bce_TPAT_b06FwDataAddr;
|
|
fw.data_len = bce_TPAT_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_TPAT_b06FwData;
|
|
|
|
fw.sbss_addr = bce_TPAT_b06FwSbssAddr;
|
|
fw.sbss_len = bce_TPAT_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_TPAT_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_TPAT_b06FwBssAddr;
|
|
fw.bss_len = bce_TPAT_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_TPAT_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_TPAT_b06FwRodataAddr;
|
|
fw.rodata_len = bce_TPAT_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_TPAT_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading TPAT firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the CP CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_cp_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_CP_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_CP_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_CP_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_CP_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_CP_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_CP_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_CP_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_CP_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_CP_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_CP_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
fw.ver_major = bce_CP_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_CP_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_CP_b09FwReleaseFix;
|
|
fw.start_addr = bce_CP_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_CP_b09FwTextAddr;
|
|
fw.text_len = bce_CP_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_CP_b09FwText;
|
|
|
|
fw.data_addr = bce_CP_b09FwDataAddr;
|
|
fw.data_len = bce_CP_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_CP_b09FwData;
|
|
|
|
fw.sbss_addr = bce_CP_b09FwSbssAddr;
|
|
fw.sbss_len = bce_CP_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_CP_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_CP_b09FwBssAddr;
|
|
fw.bss_len = bce_CP_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_CP_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_CP_b09FwRodataAddr;
|
|
fw.rodata_len = bce_CP_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_CP_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_CP_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_CP_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_CP_b06FwReleaseFix;
|
|
fw.start_addr = bce_CP_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_CP_b06FwTextAddr;
|
|
fw.text_len = bce_CP_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_CP_b06FwText;
|
|
|
|
fw.data_addr = bce_CP_b06FwDataAddr;
|
|
fw.data_len = bce_CP_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_CP_b06FwData;
|
|
|
|
fw.sbss_addr = bce_CP_b06FwSbssAddr;
|
|
fw.sbss_len = bce_CP_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_CP_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_CP_b06FwBssAddr;
|
|
fw.bss_len = bce_CP_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_CP_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_CP_b06FwRodataAddr;
|
|
fw.rodata_len = bce_CP_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_CP_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading CP firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the COM CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_com_cpu(struct bce_softc *sc)
|
|
{
|
|
struct cpu_reg cpu_reg;
|
|
struct fw_info fw;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
cpu_reg.mode = BCE_COM_CPU_MODE;
|
|
cpu_reg.mode_value_halt = BCE_COM_CPU_MODE_SOFT_HALT;
|
|
cpu_reg.mode_value_sstep = BCE_COM_CPU_MODE_STEP_ENA;
|
|
cpu_reg.state = BCE_COM_CPU_STATE;
|
|
cpu_reg.state_value_clear = 0xffffff;
|
|
cpu_reg.gpr0 = BCE_COM_CPU_REG_FILE;
|
|
cpu_reg.evmask = BCE_COM_CPU_EVENT_MASK;
|
|
cpu_reg.pc = BCE_COM_CPU_PROGRAM_COUNTER;
|
|
cpu_reg.inst = BCE_COM_CPU_INSTRUCTION;
|
|
cpu_reg.bp = BCE_COM_CPU_HW_BREAKPOINT;
|
|
cpu_reg.spad_base = BCE_COM_SCRATCH;
|
|
cpu_reg.mips_view_base = 0x8000000;
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
fw.ver_major = bce_COM_b09FwReleaseMajor;
|
|
fw.ver_minor = bce_COM_b09FwReleaseMinor;
|
|
fw.ver_fix = bce_COM_b09FwReleaseFix;
|
|
fw.start_addr = bce_COM_b09FwStartAddr;
|
|
|
|
fw.text_addr = bce_COM_b09FwTextAddr;
|
|
fw.text_len = bce_COM_b09FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_COM_b09FwText;
|
|
|
|
fw.data_addr = bce_COM_b09FwDataAddr;
|
|
fw.data_len = bce_COM_b09FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_COM_b09FwData;
|
|
|
|
fw.sbss_addr = bce_COM_b09FwSbssAddr;
|
|
fw.sbss_len = bce_COM_b09FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_COM_b09FwSbss;
|
|
|
|
fw.bss_addr = bce_COM_b09FwBssAddr;
|
|
fw.bss_len = bce_COM_b09FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_COM_b09FwBss;
|
|
|
|
fw.rodata_addr = bce_COM_b09FwRodataAddr;
|
|
fw.rodata_len = bce_COM_b09FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_COM_b09FwRodata;
|
|
} else {
|
|
fw.ver_major = bce_COM_b06FwReleaseMajor;
|
|
fw.ver_minor = bce_COM_b06FwReleaseMinor;
|
|
fw.ver_fix = bce_COM_b06FwReleaseFix;
|
|
fw.start_addr = bce_COM_b06FwStartAddr;
|
|
|
|
fw.text_addr = bce_COM_b06FwTextAddr;
|
|
fw.text_len = bce_COM_b06FwTextLen;
|
|
fw.text_index = 0;
|
|
fw.text = bce_COM_b06FwText;
|
|
|
|
fw.data_addr = bce_COM_b06FwDataAddr;
|
|
fw.data_len = bce_COM_b06FwDataLen;
|
|
fw.data_index = 0;
|
|
fw.data = bce_COM_b06FwData;
|
|
|
|
fw.sbss_addr = bce_COM_b06FwSbssAddr;
|
|
fw.sbss_len = bce_COM_b06FwSbssLen;
|
|
fw.sbss_index = 0;
|
|
fw.sbss = bce_COM_b06FwSbss;
|
|
|
|
fw.bss_addr = bce_COM_b06FwBssAddr;
|
|
fw.bss_len = bce_COM_b06FwBssLen;
|
|
fw.bss_index = 0;
|
|
fw.bss = bce_COM_b06FwBss;
|
|
|
|
fw.rodata_addr = bce_COM_b06FwRodataAddr;
|
|
fw.rodata_len = bce_COM_b06FwRodataLen;
|
|
fw.rodata_index = 0;
|
|
fw.rodata = bce_COM_b06FwRodata;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_RESET, "Loading COM firmware.\n");
|
|
bce_load_cpu_fw(sc, &cpu_reg, &fw);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the RV2P, RX, TX, TPAT, COM, and CP CPUs. */
|
|
/* */
|
|
/* Loads the firmware for each CPU and starts the CPU. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_cpus(struct bce_softc *sc)
|
|
{
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
bce_load_rv2p_fw(sc, bce_xi_rv2p_proc1, sizeof(bce_xi_rv2p_proc1),
|
|
RV2P_PROC1);
|
|
bce_load_rv2p_fw(sc, bce_xi_rv2p_proc2, sizeof(bce_xi_rv2p_proc2),
|
|
RV2P_PROC2);
|
|
} else {
|
|
bce_load_rv2p_fw(sc, bce_rv2p_proc1, sizeof(bce_rv2p_proc1),
|
|
RV2P_PROC1);
|
|
bce_load_rv2p_fw(sc, bce_rv2p_proc2, sizeof(bce_rv2p_proc2),
|
|
RV2P_PROC2);
|
|
}
|
|
|
|
bce_init_rxp_cpu(sc);
|
|
bce_init_txp_cpu(sc);
|
|
bce_init_tpat_cpu(sc);
|
|
bce_init_com_cpu(sc);
|
|
bce_init_cp_cpu(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize context memory. */
|
|
/* */
|
|
/* Clears the memory associated with each Context ID (CID). */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_ctx(struct bce_softc *sc)
|
|
{
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_CTX);
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
/* DRC: Replace this constant value with a #define. */
|
|
int i, retry_cnt = 10;
|
|
u32 val;
|
|
|
|
DBPRINT(sc, BCE_INFO_CTX, "Initializing 5709 context.\n");
|
|
|
|
/*
|
|
* BCM5709 context memory may be cached
|
|
* in host memory so prepare the host memory
|
|
* for access.
|
|
*/
|
|
val = BCE_CTX_COMMAND_ENABLED | BCE_CTX_COMMAND_MEM_INIT | (1 << 12);
|
|
val |= (BCM_PAGE_BITS - 8) << 16;
|
|
REG_WR(sc, BCE_CTX_COMMAND, val);
|
|
|
|
/* Wait for mem init command to complete. */
|
|
for (i = 0; i < retry_cnt; i++) {
|
|
val = REG_RD(sc, BCE_CTX_COMMAND);
|
|
if (!(val & BCE_CTX_COMMAND_MEM_INIT))
|
|
break;
|
|
DELAY(2);
|
|
}
|
|
|
|
/* ToDo: Consider returning an error here. */
|
|
DBRUNIF((val & BCE_CTX_COMMAND_MEM_INIT),
|
|
BCE_PRINTF("%s(): Context memory initialization failed!\n",
|
|
__FUNCTION__));
|
|
|
|
for (i = 0; i < sc->ctx_pages; i++) {
|
|
int j;
|
|
|
|
/* Set the physical address of the context memory cache. */
|
|
REG_WR(sc, BCE_CTX_HOST_PAGE_TBL_DATA0,
|
|
BCE_ADDR_LO(sc->ctx_paddr[i] & 0xfffffff0) |
|
|
BCE_CTX_HOST_PAGE_TBL_DATA0_VALID);
|
|
REG_WR(sc, BCE_CTX_HOST_PAGE_TBL_DATA1,
|
|
BCE_ADDR_HI(sc->ctx_paddr[i]));
|
|
REG_WR(sc, BCE_CTX_HOST_PAGE_TBL_CTRL, i |
|
|
BCE_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ);
|
|
|
|
/* Verify that the context memory write was successful. */
|
|
for (j = 0; j < retry_cnt; j++) {
|
|
val = REG_RD(sc, BCE_CTX_HOST_PAGE_TBL_CTRL);
|
|
if ((val & BCE_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ) == 0)
|
|
break;
|
|
DELAY(5);
|
|
}
|
|
|
|
/* ToDo: Consider returning an error here. */
|
|
DBRUNIF((val & BCE_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ),
|
|
BCE_PRINTF("%s(): Failed to initialize context page %d!\n",
|
|
__FUNCTION__, i));
|
|
}
|
|
} else {
|
|
u32 vcid_addr, offset;
|
|
|
|
DBPRINT(sc, BCE_INFO, "Initializing 5706/5708 context.\n");
|
|
|
|
/*
|
|
* For the 5706/5708, context memory is local to
|
|
* the controller, so initialize the controller
|
|
* context memory.
|
|
*/
|
|
|
|
vcid_addr = GET_CID_ADDR(96);
|
|
while (vcid_addr) {
|
|
|
|
vcid_addr -= PHY_CTX_SIZE;
|
|
|
|
REG_WR(sc, BCE_CTX_VIRT_ADDR, 0);
|
|
REG_WR(sc, BCE_CTX_PAGE_TBL, vcid_addr);
|
|
|
|
for(offset = 0; offset < PHY_CTX_SIZE; offset += 4) {
|
|
CTX_WR(sc, 0x00, offset, 0);
|
|
}
|
|
|
|
REG_WR(sc, BCE_CTX_VIRT_ADDR, vcid_addr);
|
|
REG_WR(sc, BCE_CTX_PAGE_TBL, vcid_addr);
|
|
}
|
|
|
|
}
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Fetch the permanent MAC address of the controller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_get_mac_addr(struct bce_softc *sc)
|
|
{
|
|
u32 mac_lo = 0, mac_hi = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
/*
|
|
* The NetXtreme II bootcode populates various NIC
|
|
* power-on and runtime configuration items in a
|
|
* shared memory area. The factory configured MAC
|
|
* address is available from both NVRAM and the
|
|
* shared memory area so we'll read the value from
|
|
* shared memory for speed.
|
|
*/
|
|
|
|
mac_hi = REG_RD_IND(sc, sc->bce_shmem_base +
|
|
BCE_PORT_HW_CFG_MAC_UPPER);
|
|
mac_lo = REG_RD_IND(sc, sc->bce_shmem_base +
|
|
BCE_PORT_HW_CFG_MAC_LOWER);
|
|
|
|
if ((mac_lo == 0) && (mac_hi == 0)) {
|
|
BCE_PRINTF("%s(%d): Invalid Ethernet address!\n",
|
|
__FILE__, __LINE__);
|
|
} else {
|
|
sc->eaddr[0] = (u_char)(mac_hi >> 8);
|
|
sc->eaddr[1] = (u_char)(mac_hi >> 0);
|
|
sc->eaddr[2] = (u_char)(mac_lo >> 24);
|
|
sc->eaddr[3] = (u_char)(mac_lo >> 16);
|
|
sc->eaddr[4] = (u_char)(mac_lo >> 8);
|
|
sc->eaddr[5] = (u_char)(mac_lo >> 0);
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_MISC, "Permanent Ethernet address = %6D\n", sc->eaddr, ":");
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Program the MAC address. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_set_mac_addr(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
u8 *mac_addr = sc->eaddr;
|
|
|
|
/* ToDo: Add support for setting multiple MAC addresses. */
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
DBPRINT(sc, BCE_INFO_MISC, "Setting Ethernet address = %6D\n", sc->eaddr, ":");
|
|
|
|
val = (mac_addr[0] << 8) | mac_addr[1];
|
|
|
|
REG_WR(sc, BCE_EMAC_MAC_MATCH0, val);
|
|
|
|
val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
|
|
(mac_addr[4] << 8) | mac_addr[5];
|
|
|
|
REG_WR(sc, BCE_EMAC_MAC_MATCH1, val);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Stop the controller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_stop(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmedia_entry *ifm;
|
|
struct mii_data *mii = NULL;
|
|
int mtmp, itmp;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
|
|
callout_stop(&sc->bce_tick_callout);
|
|
|
|
/* Disable the transmit/receive blocks. */
|
|
REG_WR(sc, BCE_MISC_ENABLE_CLR_BITS, BCE_MISC_ENABLE_CLR_DEFAULT);
|
|
REG_RD(sc, BCE_MISC_ENABLE_CLR_BITS);
|
|
DELAY(20);
|
|
|
|
bce_disable_intr(sc);
|
|
|
|
/* Free RX buffers. */
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
bce_free_pg_chain(sc);
|
|
#endif
|
|
bce_free_rx_chain(sc);
|
|
|
|
/* Free TX buffers. */
|
|
bce_free_tx_chain(sc);
|
|
|
|
/*
|
|
* Isolate/power down the PHY, but leave the media selection
|
|
* unchanged so that things will be put back to normal when
|
|
* we bring the interface back up.
|
|
*/
|
|
|
|
itmp = ifp->if_flags;
|
|
ifp->if_flags |= IFF_UP;
|
|
|
|
/* If we are called from bce_detach(), mii is already NULL. */
|
|
if (mii != NULL) {
|
|
ifm = mii->mii_media.ifm_cur;
|
|
mtmp = ifm->ifm_media;
|
|
ifm->ifm_media = IFM_ETHER | IFM_NONE;
|
|
mii_mediachg(mii);
|
|
ifm->ifm_media = mtmp;
|
|
}
|
|
|
|
ifp->if_flags = itmp;
|
|
sc->watchdog_timer = 0;
|
|
|
|
sc->bce_link = 0;
|
|
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
static int
|
|
bce_reset(struct bce_softc *sc, u32 reset_code)
|
|
{
|
|
u32 val;
|
|
int i, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
DBPRINT(sc, BCE_VERBOSE_RESET, "%s(): reset_code = 0x%08X\n",
|
|
__FUNCTION__, reset_code);
|
|
|
|
/* Wait for pending PCI transactions to complete. */
|
|
REG_WR(sc, BCE_MISC_ENABLE_CLR_BITS,
|
|
BCE_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE |
|
|
BCE_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE |
|
|
BCE_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE |
|
|
BCE_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE);
|
|
val = REG_RD(sc, BCE_MISC_ENABLE_CLR_BITS);
|
|
DELAY(5);
|
|
|
|
/* Disable DMA */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
val = REG_RD(sc, BCE_MISC_NEW_CORE_CTL);
|
|
val &= ~BCE_MISC_NEW_CORE_CTL_DMA_ENABLE;
|
|
REG_WR(sc, BCE_MISC_NEW_CORE_CTL, val);
|
|
}
|
|
|
|
/* Assume bootcode is running. */
|
|
sc->bce_fw_timed_out = 0;
|
|
|
|
/* Give the firmware a chance to prepare for the reset. */
|
|
rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT0 | reset_code);
|
|
if (rc)
|
|
goto bce_reset_exit;
|
|
|
|
/* Set a firmware reminder that this is a soft reset. */
|
|
REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_RESET_SIGNATURE,
|
|
BCE_DRV_RESET_SIGNATURE_MAGIC);
|
|
|
|
/* Dummy read to force the chip to complete all current transactions. */
|
|
val = REG_RD(sc, BCE_MISC_ID);
|
|
|
|
/* Chip reset. */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
REG_WR(sc, BCE_MISC_COMMAND, BCE_MISC_COMMAND_SW_RESET);
|
|
REG_RD(sc, BCE_MISC_COMMAND);
|
|
DELAY(5);
|
|
|
|
val = BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
|
|
BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
|
|
|
|
pci_write_config(sc->bce_dev, BCE_PCICFG_MISC_CONFIG, val, 4);
|
|
} else {
|
|
val = BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ |
|
|
BCE_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
|
|
BCE_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
|
|
REG_WR(sc, BCE_PCICFG_MISC_CONFIG, val);
|
|
|
|
/* Allow up to 30us for reset to complete. */
|
|
for (i = 0; i < 10; i++) {
|
|
val = REG_RD(sc, BCE_PCICFG_MISC_CONFIG);
|
|
if ((val & (BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ |
|
|
BCE_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) {
|
|
break;
|
|
}
|
|
DELAY(10);
|
|
}
|
|
|
|
/* Check that reset completed successfully. */
|
|
if (val & (BCE_PCICFG_MISC_CONFIG_CORE_RST_REQ |
|
|
BCE_PCICFG_MISC_CONFIG_CORE_RST_BSY)) {
|
|
BCE_PRINTF("%s(%d): Reset failed!\n",
|
|
__FILE__, __LINE__);
|
|
rc = EBUSY;
|
|
goto bce_reset_exit;
|
|
}
|
|
}
|
|
|
|
/* Make sure byte swapping is properly configured. */
|
|
val = REG_RD(sc, BCE_PCI_SWAP_DIAG0);
|
|
if (val != 0x01020304) {
|
|
BCE_PRINTF("%s(%d): Byte swap is incorrect!\n",
|
|
__FILE__, __LINE__);
|
|
rc = ENODEV;
|
|
goto bce_reset_exit;
|
|
}
|
|
|
|
/* Just completed a reset, assume that firmware is running again. */
|
|
sc->bce_fw_timed_out = 0;
|
|
|
|
/* Wait for the firmware to finish its initialization. */
|
|
rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT1 | reset_code);
|
|
if (rc)
|
|
BCE_PRINTF("%s(%d): Firmware did not complete initialization!\n",
|
|
__FILE__, __LINE__);
|
|
|
|
bce_reset_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
return (rc);
|
|
}
|
|
|
|
|
|
static int
|
|
bce_chipinit(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
int rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
bce_disable_intr(sc);
|
|
|
|
/*
|
|
* Initialize DMA byte/word swapping, configure the number of DMA
|
|
* channels and PCI clock compensation delay.
|
|
*/
|
|
val = BCE_DMA_CONFIG_DATA_BYTE_SWAP |
|
|
BCE_DMA_CONFIG_DATA_WORD_SWAP |
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
BCE_DMA_CONFIG_CNTL_BYTE_SWAP |
|
|
#endif
|
|
BCE_DMA_CONFIG_CNTL_WORD_SWAP |
|
|
DMA_READ_CHANS << 12 |
|
|
DMA_WRITE_CHANS << 16;
|
|
|
|
val |= (0x2 << 20) | BCE_DMA_CONFIG_CNTL_PCI_COMP_DLY;
|
|
|
|
if ((sc->bce_flags & BCE_PCIX_FLAG) && (sc->bus_speed_mhz == 133))
|
|
val |= BCE_DMA_CONFIG_PCI_FAST_CLK_CMP;
|
|
|
|
/*
|
|
* This setting resolves a problem observed on certain Intel PCI
|
|
* chipsets that cannot handle multiple outstanding DMA operations.
|
|
* See errata E9_5706A1_65.
|
|
*/
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) &&
|
|
(BCE_CHIP_ID(sc) != BCE_CHIP_ID_5706_A0) &&
|
|
!(sc->bce_flags & BCE_PCIX_FLAG))
|
|
val |= BCE_DMA_CONFIG_CNTL_PING_PONG_DMA;
|
|
|
|
REG_WR(sc, BCE_DMA_CONFIG, val);
|
|
|
|
/* Enable the RX_V2P and Context state machines before access. */
|
|
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS,
|
|
BCE_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE |
|
|
BCE_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE |
|
|
BCE_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE);
|
|
|
|
/* Initialize context mapping and zero out the quick contexts. */
|
|
bce_init_ctx(sc);
|
|
|
|
/* Initialize the on-boards CPUs */
|
|
bce_init_cpus(sc);
|
|
|
|
/* Prepare NVRAM for access. */
|
|
if (bce_init_nvram(sc)) {
|
|
rc = ENODEV;
|
|
goto bce_chipinit_exit;
|
|
}
|
|
|
|
/* Set the kernel bypass block size */
|
|
val = REG_RD(sc, BCE_MQ_CONFIG);
|
|
val &= ~BCE_MQ_CONFIG_KNL_BYP_BLK_SIZE;
|
|
val |= BCE_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
|
|
|
|
/* Enable bins used on the 5709. */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
val |= BCE_MQ_CONFIG_BIN_MQ_MODE;
|
|
if (BCE_CHIP_ID(sc) == BCE_CHIP_ID_5709_A1)
|
|
val |= BCE_MQ_CONFIG_HALT_DIS;
|
|
}
|
|
|
|
REG_WR(sc, BCE_MQ_CONFIG, val);
|
|
|
|
val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE);
|
|
REG_WR(sc, BCE_MQ_KNL_BYP_WIND_START, val);
|
|
REG_WR(sc, BCE_MQ_KNL_WIND_END, val);
|
|
|
|
/* Set the page size and clear the RV2P processor stall bits. */
|
|
val = (BCM_PAGE_BITS - 8) << 24;
|
|
REG_WR(sc, BCE_RV2P_CONFIG, val);
|
|
|
|
/* Configure page size. */
|
|
val = REG_RD(sc, BCE_TBDR_CONFIG);
|
|
val &= ~BCE_TBDR_CONFIG_PAGE_SIZE;
|
|
val |= (BCM_PAGE_BITS - 8) << 24 | 0x40;
|
|
REG_WR(sc, BCE_TBDR_CONFIG, val);
|
|
|
|
/* Set the perfect match control register to default. */
|
|
REG_WR_IND(sc, BCE_RXP_PM_CTRL, 0);
|
|
|
|
bce_chipinit_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the controller in preparation to send/receive traffic. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_blockinit(struct bce_softc *sc)
|
|
{
|
|
u32 reg, val;
|
|
int rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
/* Load the hardware default MAC address. */
|
|
bce_set_mac_addr(sc);
|
|
|
|
/* Set the Ethernet backoff seed value */
|
|
val = sc->eaddr[0] + (sc->eaddr[1] << 8) +
|
|
(sc->eaddr[2] << 16) + (sc->eaddr[3] ) +
|
|
(sc->eaddr[4] << 8) + (sc->eaddr[5] << 16);
|
|
REG_WR(sc, BCE_EMAC_BACKOFF_SEED, val);
|
|
|
|
sc->last_status_idx = 0;
|
|
sc->rx_mode = BCE_EMAC_RX_MODE_SORT_MODE;
|
|
|
|
/* Set up link change interrupt generation. */
|
|
REG_WR(sc, BCE_EMAC_ATTENTION_ENA, BCE_EMAC_ATTENTION_ENA_LINK);
|
|
|
|
/* Program the physical address of the status block. */
|
|
REG_WR(sc, BCE_HC_STATUS_ADDR_L,
|
|
BCE_ADDR_LO(sc->status_block_paddr));
|
|
REG_WR(sc, BCE_HC_STATUS_ADDR_H,
|
|
BCE_ADDR_HI(sc->status_block_paddr));
|
|
|
|
/* Program the physical address of the statistics block. */
|
|
REG_WR(sc, BCE_HC_STATISTICS_ADDR_L,
|
|
BCE_ADDR_LO(sc->stats_block_paddr));
|
|
REG_WR(sc, BCE_HC_STATISTICS_ADDR_H,
|
|
BCE_ADDR_HI(sc->stats_block_paddr));
|
|
|
|
/* Program various host coalescing parameters. */
|
|
REG_WR(sc, BCE_HC_TX_QUICK_CONS_TRIP,
|
|
(sc->bce_tx_quick_cons_trip_int << 16) | sc->bce_tx_quick_cons_trip);
|
|
REG_WR(sc, BCE_HC_RX_QUICK_CONS_TRIP,
|
|
(sc->bce_rx_quick_cons_trip_int << 16) | sc->bce_rx_quick_cons_trip);
|
|
REG_WR(sc, BCE_HC_COMP_PROD_TRIP,
|
|
(sc->bce_comp_prod_trip_int << 16) | sc->bce_comp_prod_trip);
|
|
REG_WR(sc, BCE_HC_TX_TICKS,
|
|
(sc->bce_tx_ticks_int << 16) | sc->bce_tx_ticks);
|
|
REG_WR(sc, BCE_HC_RX_TICKS,
|
|
(sc->bce_rx_ticks_int << 16) | sc->bce_rx_ticks);
|
|
REG_WR(sc, BCE_HC_COM_TICKS,
|
|
(sc->bce_com_ticks_int << 16) | sc->bce_com_ticks);
|
|
REG_WR(sc, BCE_HC_CMD_TICKS,
|
|
(sc->bce_cmd_ticks_int << 16) | sc->bce_cmd_ticks);
|
|
REG_WR(sc, BCE_HC_STATS_TICKS,
|
|
(sc->bce_stats_ticks & 0xffff00));
|
|
REG_WR(sc, BCE_HC_STAT_COLLECT_TICKS, 0xbb8); /* 3ms */
|
|
|
|
/* Configure the Host Coalescing block. */
|
|
val = BCE_HC_CONFIG_RX_TMR_MODE | BCE_HC_CONFIG_TX_TMR_MODE |
|
|
BCE_HC_CONFIG_COLLECT_STATS;
|
|
|
|
#if 0
|
|
/* ToDo: Add MSI-X support. */
|
|
if (sc->bce_flags & BCE_USING_MSIX_FLAG) {
|
|
u32 base = ((BCE_TX_VEC - 1) * BCE_HC_SB_CONFIG_SIZE) +
|
|
BCE_HC_SB_CONFIG_1;
|
|
|
|
REG_WR(sc, BCE_HC_MSIX_BIT_VECTOR, BCE_HC_MSIX_BIT_VECTOR_VAL);
|
|
|
|
REG_WR(sc, base, BCE_HC_SB_CONFIG_1_TX_TMR_MODE |
|
|
BCE_HC_SB_CONFIG_1_ONE_SHOT);
|
|
|
|
REG_WR(sc, base + BCE_HC_TX_QUICK_CONS_TRIP_OFF,
|
|
(sc->tx_quick_cons_trip_int << 16) |
|
|
sc->tx_quick_cons_trip);
|
|
|
|
REG_WR(sc, base + BCE_HC_TX_TICKS_OFF,
|
|
(sc->tx_ticks_int << 16) | sc->tx_ticks);
|
|
|
|
val |= BCE_HC_CONFIG_SB_ADDR_INC_128B;
|
|
}
|
|
|
|
/*
|
|
* Tell the HC block to automatically set the
|
|
* INT_MASK bit after an MSI/MSI-X interrupt
|
|
* is generated so the driver doesn't have to.
|
|
*/
|
|
if (sc->bce_flags & BCE_ONE_SHOT_MSI_FLAG)
|
|
val |= BCE_HC_CONFIG_ONE_SHOT;
|
|
|
|
/* Set the MSI-X status blocks to 128 byte boundaries. */
|
|
if (sc->bce_flags & BCE_USING_MSIX_FLAG)
|
|
val |= BCE_HC_CONFIG_SB_ADDR_INC_128B;
|
|
#endif
|
|
|
|
REG_WR(sc, BCE_HC_CONFIG, val);
|
|
|
|
/* Clear the internal statistics counters. */
|
|
REG_WR(sc, BCE_HC_COMMAND, BCE_HC_COMMAND_CLR_STAT_NOW);
|
|
|
|
/* Verify that bootcode is running. */
|
|
reg = REG_RD_IND(sc, sc->bce_shmem_base + BCE_DEV_INFO_SIGNATURE);
|
|
|
|
DBRUNIF(DB_RANDOMTRUE(bce_debug_bootcode_running_failure),
|
|
BCE_PRINTF("%s(%d): Simulating bootcode failure.\n",
|
|
__FILE__, __LINE__);
|
|
reg = 0);
|
|
|
|
if ((reg & BCE_DEV_INFO_SIGNATURE_MAGIC_MASK) !=
|
|
BCE_DEV_INFO_SIGNATURE_MAGIC) {
|
|
BCE_PRINTF("%s(%d): Bootcode not running! Found: 0x%08X, "
|
|
"Expected: 08%08X\n", __FILE__, __LINE__,
|
|
(reg & BCE_DEV_INFO_SIGNATURE_MAGIC_MASK),
|
|
BCE_DEV_INFO_SIGNATURE_MAGIC);
|
|
rc = ENODEV;
|
|
goto bce_blockinit_exit;
|
|
}
|
|
|
|
/* Enable DMA */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
val = REG_RD(sc, BCE_MISC_NEW_CORE_CTL);
|
|
val |= BCE_MISC_NEW_CORE_CTL_DMA_ENABLE;
|
|
REG_WR(sc, BCE_MISC_NEW_CORE_CTL, val);
|
|
}
|
|
|
|
/* Allow bootcode to apply any additional fixes before enabling MAC. */
|
|
rc = bce_fw_sync(sc, BCE_DRV_MSG_DATA_WAIT2 | BCE_DRV_MSG_CODE_RESET);
|
|
|
|
/* Enable link state change interrupt generation. */
|
|
REG_WR(sc, BCE_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE);
|
|
|
|
/* Enable all remaining blocks in the MAC. */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716))
|
|
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS, BCE_MISC_ENABLE_DEFAULT_XI);
|
|
else
|
|
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS, BCE_MISC_ENABLE_DEFAULT);
|
|
|
|
REG_RD(sc, BCE_MISC_ENABLE_SET_BITS);
|
|
DELAY(20);
|
|
|
|
/* Save the current host coalescing block settings. */
|
|
sc->hc_command = REG_RD(sc, BCE_HC_COMMAND);
|
|
|
|
bce_blockinit_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
|
|
return (rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Encapsulate an mbuf into the rx_bd chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_get_rx_buf(struct bce_softc *sc, struct mbuf *m, u16 *prod,
|
|
u16 *chain_prod, u32 *prod_bseq)
|
|
{
|
|
bus_dmamap_t map;
|
|
bus_dma_segment_t segs[BCE_MAX_SEGMENTS];
|
|
struct mbuf *m_new = NULL;
|
|
struct rx_bd *rxbd;
|
|
int nsegs, error, rc = 0;
|
|
#ifdef BCE_DEBUG
|
|
u16 debug_chain_prod = *chain_prod;
|
|
#endif
|
|
|
|
DBENTER(BCE_EXTREME_RESET | BCE_EXTREME_RECV | BCE_EXTREME_LOAD);
|
|
|
|
/* Make sure the inputs are valid. */
|
|
DBRUNIF((*chain_prod > MAX_RX_BD),
|
|
BCE_PRINTF("%s(%d): RX producer out of range: 0x%04X > 0x%04X\n",
|
|
__FILE__, __LINE__, *chain_prod, (u16) MAX_RX_BD));
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(enter): prod = 0x%04X, chain_prod = 0x%04X, "
|
|
"prod_bseq = 0x%08X\n", __FUNCTION__, *prod, *chain_prod, *prod_bseq);
|
|
|
|
/* Update some debug statistic counters */
|
|
DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark),
|
|
sc->rx_low_watermark = sc->free_rx_bd);
|
|
DBRUNIF((sc->free_rx_bd == sc->max_rx_bd), sc->rx_empty_count++);
|
|
|
|
/* Check whether this is a new mbuf allocation. */
|
|
if (m == NULL) {
|
|
|
|
/* Simulate an mbuf allocation failure. */
|
|
DBRUNIF(DB_RANDOMTRUE(bce_debug_mbuf_allocation_failure),
|
|
sc->mbuf_alloc_failed++;
|
|
sc->debug_mbuf_sim_alloc_failed++;
|
|
rc = ENOBUFS;
|
|
goto bce_get_rx_buf_exit);
|
|
|
|
/* This is a new mbuf allocation. */
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
#else
|
|
if (sc->rx_bd_mbuf_alloc_size <= MCLBYTES)
|
|
m_new = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
|
|
else
|
|
m_new = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR, sc->rx_bd_mbuf_alloc_size);
|
|
#endif
|
|
|
|
if (m_new == NULL) {
|
|
sc->mbuf_alloc_failed++;
|
|
rc = ENOBUFS;
|
|
goto bce_get_rx_buf_exit;
|
|
}
|
|
|
|
DBRUN(sc->debug_rx_mbuf_alloc++);
|
|
} else {
|
|
/* Reuse an existing mbuf. */
|
|
m_new = m;
|
|
}
|
|
|
|
/* Make sure we have a valid packet header. */
|
|
M_ASSERTPKTHDR(m_new);
|
|
|
|
/* Initialize the mbuf size and pad if necessary for alignment. */
|
|
m_new->m_pkthdr.len = m_new->m_len = sc->rx_bd_mbuf_alloc_size;
|
|
m_adj(m_new, sc->rx_bd_mbuf_align_pad);
|
|
|
|
/* ToDo: Consider calling m_fragment() to test error handling. */
|
|
|
|
/* Map the mbuf cluster into device memory. */
|
|
map = sc->rx_mbuf_map[*chain_prod];
|
|
error = bus_dmamap_load_mbuf_sg(sc->rx_mbuf_tag, map, m_new,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
/* Handle any mapping errors. */
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Error mapping mbuf into RX chain (%d)!\n",
|
|
__FILE__, __LINE__, error);
|
|
|
|
m_freem(m_new);
|
|
DBRUN(sc->debug_rx_mbuf_alloc--);
|
|
|
|
rc = ENOBUFS;
|
|
goto bce_get_rx_buf_exit;
|
|
}
|
|
|
|
/* All mbufs must map to a single segment. */
|
|
KASSERT(nsegs == 1, ("%s(): Too many segments returned (%d)!",
|
|
__FUNCTION__, nsegs));
|
|
|
|
/* ToDo: Do we need bus_dmamap_sync(,,BUS_DMASYNC_PREWRITE) here? */
|
|
|
|
/* Setup the rx_bd for the segment. */
|
|
rxbd = &sc->rx_bd_chain[RX_PAGE(*chain_prod)][RX_IDX(*chain_prod)];
|
|
|
|
rxbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[0].ds_addr));
|
|
rxbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[0].ds_addr));
|
|
rxbd->rx_bd_len = htole32(segs[0].ds_len);
|
|
rxbd->rx_bd_flags = htole32(RX_BD_FLAGS_START | RX_BD_FLAGS_END);
|
|
*prod_bseq += segs[0].ds_len;
|
|
|
|
/* Save the mbuf and update our counter. */
|
|
sc->rx_mbuf_ptr[*chain_prod] = m_new;
|
|
sc->free_rx_bd -= nsegs;
|
|
|
|
DBRUNMSG(BCE_INSANE_RECV, bce_dump_rx_mbuf_chain(sc, debug_chain_prod,
|
|
nsegs));
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(exit): prod = 0x%04X, chain_prod = 0x%04X, "
|
|
"prod_bseq = 0x%08X\n", __FUNCTION__, *prod, *chain_prod, *prod_bseq);
|
|
|
|
bce_get_rx_buf_exit:
|
|
DBEXIT(BCE_EXTREME_RESET | BCE_EXTREME_RECV | BCE_EXTREME_LOAD);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/****************************************************************************/
|
|
/* Encapsulate an mbuf cluster into the page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_get_pg_buf(struct bce_softc *sc, struct mbuf *m, u16 *prod,
|
|
u16 *prod_idx)
|
|
{
|
|
bus_dmamap_t map;
|
|
bus_addr_t busaddr;
|
|
struct mbuf *m_new = NULL;
|
|
struct rx_bd *pgbd;
|
|
int error, rc = 0;
|
|
#ifdef BCE_DEBUG
|
|
u16 debug_prod_idx = *prod_idx;
|
|
#endif
|
|
|
|
DBENTER(BCE_EXTREME_RESET | BCE_EXTREME_RECV | BCE_EXTREME_LOAD);
|
|
|
|
/* Make sure the inputs are valid. */
|
|
DBRUNIF((*prod_idx > MAX_PG_BD),
|
|
BCE_PRINTF("%s(%d): page producer out of range: 0x%04X > 0x%04X\n",
|
|
__FILE__, __LINE__, *prod_idx, (u16) MAX_PG_BD));
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(enter): prod = 0x%04X, "
|
|
"chain_prod = 0x%04X\n", __FUNCTION__, *prod, *prod_idx);
|
|
|
|
/* Update counters if we've hit a new low or run out of pages. */
|
|
DBRUNIF((sc->free_pg_bd < sc->pg_low_watermark),
|
|
sc->pg_low_watermark = sc->free_pg_bd);
|
|
DBRUNIF((sc->free_pg_bd == sc->max_pg_bd), sc->pg_empty_count++);
|
|
|
|
/* Check whether this is a new mbuf allocation. */
|
|
if (m == NULL) {
|
|
|
|
/* Simulate an mbuf allocation failure. */
|
|
DBRUNIF(DB_RANDOMTRUE(bce_debug_mbuf_allocation_failure),
|
|
sc->mbuf_alloc_failed++;
|
|
sc->debug_mbuf_sim_alloc_failed++;
|
|
rc = ENOBUFS;
|
|
goto bce_get_pg_buf_exit);
|
|
|
|
/* This is a new mbuf allocation. */
|
|
m_new = m_getcl(M_DONTWAIT, MT_DATA, 0);
|
|
if (m_new == NULL) {
|
|
sc->mbuf_alloc_failed++;
|
|
rc = ENOBUFS;
|
|
goto bce_get_pg_buf_exit;
|
|
}
|
|
|
|
DBRUN(sc->debug_pg_mbuf_alloc++);
|
|
} else {
|
|
/* Reuse an existing mbuf. */
|
|
m_new = m;
|
|
m_new->m_data = m_new->m_ext.ext_buf;
|
|
}
|
|
|
|
m_new->m_len = sc->pg_bd_mbuf_alloc_size;
|
|
|
|
/* ToDo: Consider calling m_fragment() to test error handling. */
|
|
|
|
/* Map the mbuf cluster into device memory. */
|
|
map = sc->pg_mbuf_map[*prod_idx];
|
|
error = bus_dmamap_load(sc->pg_mbuf_tag, map, mtod(m_new, void *),
|
|
sc->pg_bd_mbuf_alloc_size, bce_dma_map_addr, &busaddr, BUS_DMA_NOWAIT);
|
|
|
|
/* Handle any mapping errors. */
|
|
if (error) {
|
|
BCE_PRINTF("%s(%d): Error mapping mbuf into page chain!\n",
|
|
__FILE__, __LINE__);
|
|
|
|
m_freem(m_new);
|
|
DBRUN(sc->debug_pg_mbuf_alloc--);
|
|
|
|
rc = ENOBUFS;
|
|
goto bce_get_pg_buf_exit;
|
|
}
|
|
|
|
/* ToDo: Do we need bus_dmamap_sync(,,BUS_DMASYNC_PREWRITE) here? */
|
|
|
|
/*
|
|
* The page chain uses the same rx_bd data structure
|
|
* as the receive chain but doesn't require a byte sequence (bseq).
|
|
*/
|
|
pgbd = &sc->pg_bd_chain[PG_PAGE(*prod_idx)][PG_IDX(*prod_idx)];
|
|
|
|
pgbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(busaddr));
|
|
pgbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(busaddr));
|
|
pgbd->rx_bd_len = htole32(sc->pg_bd_mbuf_alloc_size);
|
|
pgbd->rx_bd_flags = htole32(RX_BD_FLAGS_START | RX_BD_FLAGS_END);
|
|
|
|
/* Save the mbuf and update our counter. */
|
|
sc->pg_mbuf_ptr[*prod_idx] = m_new;
|
|
sc->free_pg_bd--;
|
|
|
|
DBRUNMSG(BCE_INSANE_RECV, bce_dump_pg_mbuf_chain(sc, debug_prod_idx,
|
|
1));
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(exit): prod = 0x%04X, "
|
|
"prod_idx = 0x%04X\n", __FUNCTION__, *prod, *prod_idx);
|
|
|
|
bce_get_pg_buf_exit:
|
|
DBEXIT(BCE_EXTREME_RESET | BCE_EXTREME_RECV | BCE_EXTREME_LOAD);
|
|
|
|
return(rc);
|
|
}
|
|
#endif /* BCE_USE_SPLIT_HEADER */
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the TX context memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_tx_context(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_CTX);
|
|
|
|
/* Initialize the context ID for an L2 TX chain. */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
/* Set the CID type to support an L2 connection. */
|
|
val = BCE_L2CTX_TX_TYPE_TYPE_L2_XI | BCE_L2CTX_TX_TYPE_SIZE_L2_XI;
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_TYPE_XI, val);
|
|
val = BCE_L2CTX_TX_CMD_TYPE_TYPE_L2_XI | (8 << 16);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_CMD_TYPE_XI, val);
|
|
|
|
/* Point the hardware to the first page in the chain. */
|
|
val = BCE_ADDR_HI(sc->tx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_TBDR_BHADDR_HI_XI, val);
|
|
val = BCE_ADDR_LO(sc->tx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_TBDR_BHADDR_LO_XI, val);
|
|
} else {
|
|
/* Set the CID type to support an L2 connection. */
|
|
val = BCE_L2CTX_TX_TYPE_TYPE_L2 | BCE_L2CTX_TX_TYPE_SIZE_L2;
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_TYPE, val);
|
|
val = BCE_L2CTX_TX_CMD_TYPE_TYPE_L2 | (8 << 16);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_CMD_TYPE, val);
|
|
|
|
/* Point the hardware to the first page in the chain. */
|
|
val = BCE_ADDR_HI(sc->tx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_TBDR_BHADDR_HI, val);
|
|
val = BCE_ADDR_LO(sc->tx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(TX_CID), BCE_L2CTX_TX_TBDR_BHADDR_LO, val);
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allocate memory and initialize the TX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_init_tx_chain(struct bce_softc *sc)
|
|
{
|
|
struct tx_bd *txbd;
|
|
int i, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_LOAD);
|
|
|
|
/* Set the initial TX producer/consumer indices. */
|
|
sc->tx_prod = 0;
|
|
sc->tx_cons = 0;
|
|
sc->tx_prod_bseq = 0;
|
|
sc->used_tx_bd = 0;
|
|
sc->max_tx_bd = USABLE_TX_BD;
|
|
DBRUN(sc->tx_hi_watermark = USABLE_TX_BD);
|
|
DBRUN(sc->tx_full_count = 0);
|
|
|
|
/*
|
|
* The NetXtreme II supports a linked-list structre called
|
|
* a Buffer Descriptor Chain (or BD chain). A BD chain
|
|
* consists of a series of 1 or more chain pages, each of which
|
|
* consists of a fixed number of BD entries.
|
|
* The last BD entry on each page is a pointer to the next page
|
|
* in the chain, and the last pointer in the BD chain
|
|
* points back to the beginning of the chain.
|
|
*/
|
|
|
|
/* Set the TX next pointer chain entries. */
|
|
for (i = 0; i < TX_PAGES; i++) {
|
|
int j;
|
|
|
|
txbd = &sc->tx_bd_chain[i][USABLE_TX_BD_PER_PAGE];
|
|
|
|
/* Check if we've reached the last page. */
|
|
if (i == (TX_PAGES - 1))
|
|
j = 0;
|
|
else
|
|
j = i + 1;
|
|
|
|
txbd->tx_bd_haddr_hi = htole32(BCE_ADDR_HI(sc->tx_bd_chain_paddr[j]));
|
|
txbd->tx_bd_haddr_lo = htole32(BCE_ADDR_LO(sc->tx_bd_chain_paddr[j]));
|
|
}
|
|
|
|
bce_init_tx_context(sc);
|
|
|
|
DBRUNMSG(BCE_INSANE_SEND, bce_dump_tx_chain(sc, 0, TOTAL_TX_BD));
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_LOAD);
|
|
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Free memory and clear the TX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_free_tx_chain(struct bce_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_UNLOAD);
|
|
|
|
/* Unmap, unload, and free any mbufs still in the TX mbuf chain. */
|
|
for (i = 0; i < TOTAL_TX_BD; i++) {
|
|
if (sc->tx_mbuf_ptr[i] != NULL) {
|
|
if (sc->tx_mbuf_map[i] != NULL)
|
|
bus_dmamap_sync(sc->tx_mbuf_tag, sc->tx_mbuf_map[i],
|
|
BUS_DMASYNC_POSTWRITE);
|
|
m_freem(sc->tx_mbuf_ptr[i]);
|
|
sc->tx_mbuf_ptr[i] = NULL;
|
|
DBRUN(sc->debug_tx_mbuf_alloc--);
|
|
}
|
|
}
|
|
|
|
/* Clear each TX chain page. */
|
|
for (i = 0; i < TX_PAGES; i++)
|
|
bzero((char *)sc->tx_bd_chain[i], BCE_TX_CHAIN_PAGE_SZ);
|
|
|
|
sc->used_tx_bd = 0;
|
|
|
|
/* Check if we lost any mbufs in the process. */
|
|
DBRUNIF((sc->debug_tx_mbuf_alloc),
|
|
BCE_PRINTF("%s(%d): Memory leak! Lost %d mbufs "
|
|
"from tx chain!\n",
|
|
__FILE__, __LINE__, sc->debug_tx_mbuf_alloc));
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_SEND | BCE_VERBOSE_UNLOAD);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the RX context memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_rx_context(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_CTX);
|
|
|
|
/* Initialize the type, size, and BD cache levels for the RX context. */
|
|
val = BCE_L2CTX_RX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE |
|
|
BCE_L2CTX_RX_CTX_TYPE_SIZE_L2 |
|
|
(0x02 << BCE_L2CTX_RX_BD_PRE_READ_SHIFT);
|
|
|
|
/*
|
|
* Set the level for generating pause frames
|
|
* when the number of available rx_bd's gets
|
|
* too low (the low watermark) and the level
|
|
* when pause frames can be stopped (the high
|
|
* watermark).
|
|
*/
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
u32 lo_water, hi_water;
|
|
|
|
lo_water = BCE_L2CTX_RX_LO_WATER_MARK_DEFAULT;
|
|
hi_water = USABLE_RX_BD / 4;
|
|
|
|
lo_water /= BCE_L2CTX_RX_LO_WATER_MARK_SCALE;
|
|
hi_water /= BCE_L2CTX_RX_HI_WATER_MARK_SCALE;
|
|
|
|
if (hi_water > 0xf)
|
|
hi_water = 0xf;
|
|
else if (hi_water == 0)
|
|
lo_water = 0;
|
|
val |= (lo_water << BCE_L2CTX_RX_LO_WATER_MARK_SHIFT) |
|
|
(hi_water << BCE_L2CTX_RX_HI_WATER_MARK_SHIFT);
|
|
}
|
|
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_CTX_TYPE, val);
|
|
|
|
/* Setup the MQ BIN mapping for l2_ctx_host_bseq. */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
val = REG_RD(sc, BCE_MQ_MAP_L2_5);
|
|
REG_WR(sc, BCE_MQ_MAP_L2_5, val | BCE_MQ_MAP_L2_5_ARM);
|
|
}
|
|
|
|
/* Point the hardware to the first page in the chain. */
|
|
val = BCE_ADDR_HI(sc->rx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_NX_BDHADDR_HI, val);
|
|
val = BCE_ADDR_LO(sc->rx_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_NX_BDHADDR_LO, val);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allocate memory and initialize the RX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_init_rx_chain(struct bce_softc *sc)
|
|
{
|
|
struct rx_bd *rxbd;
|
|
int i, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
|
|
/* Initialize the RX producer and consumer indices. */
|
|
sc->rx_prod = 0;
|
|
sc->rx_cons = 0;
|
|
sc->rx_prod_bseq = 0;
|
|
sc->free_rx_bd = USABLE_RX_BD;
|
|
sc->max_rx_bd = USABLE_RX_BD;
|
|
DBRUN(sc->rx_low_watermark = sc->max_rx_bd);
|
|
DBRUN(sc->rx_empty_count = 0);
|
|
|
|
/* Initialize the RX next pointer chain entries. */
|
|
for (i = 0; i < RX_PAGES; i++) {
|
|
int j;
|
|
|
|
rxbd = &sc->rx_bd_chain[i][USABLE_RX_BD_PER_PAGE];
|
|
|
|
/* Check if we've reached the last page. */
|
|
if (i == (RX_PAGES - 1))
|
|
j = 0;
|
|
else
|
|
j = i + 1;
|
|
|
|
/* Setup the chain page pointers. */
|
|
rxbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(sc->rx_bd_chain_paddr[j]));
|
|
rxbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(sc->rx_bd_chain_paddr[j]));
|
|
}
|
|
|
|
/* Fill up the RX chain. */
|
|
bce_fill_rx_chain(sc);
|
|
|
|
for (i = 0; i < RX_PAGES; i++) {
|
|
bus_dmamap_sync(
|
|
sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i],
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
bce_init_rx_context(sc);
|
|
|
|
DBRUNMSG(BCE_EXTREME_RECV, bce_dump_rx_chain(sc, 0, TOTAL_RX_BD));
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
/* ToDo: Are there possible failure modes here? */
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Add mbufs to the RX chain until its full or an mbuf allocation error */
|
|
/* occurs. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_fill_rx_chain(struct bce_softc *sc)
|
|
{
|
|
u16 prod, prod_idx;
|
|
u32 prod_bseq;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_EXTREME_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
|
|
/* Get the RX chain producer indices. */
|
|
prod = sc->rx_prod;
|
|
prod_bseq = sc->rx_prod_bseq;
|
|
|
|
/* Keep filling the RX chain until it's full. */
|
|
while (sc->free_rx_bd > 0) {
|
|
prod_idx = RX_CHAIN_IDX(prod);
|
|
if (bce_get_rx_buf(sc, NULL, &prod, &prod_idx, &prod_bseq)) {
|
|
/* Bail out if we can't add an mbuf to the chain. */
|
|
break;
|
|
}
|
|
prod = NEXT_RX_BD(prod);
|
|
}
|
|
|
|
/* Save the RX chain producer indices. */
|
|
sc->rx_prod = prod;
|
|
sc->rx_prod_bseq = prod_bseq;
|
|
|
|
DBRUNIF(((prod & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE),
|
|
BCE_PRINTF("%s(): Invalid rx_prod value: 0x%04X\n",
|
|
__FUNCTION__, sc->rx_prod));
|
|
|
|
/* Write the mailbox and tell the chip about the waiting rx_bd's. */
|
|
REG_WR16(sc, MB_GET_CID_ADDR(RX_CID) + BCE_L2MQ_RX_HOST_BDIDX,
|
|
sc->rx_prod);
|
|
REG_WR(sc, MB_GET_CID_ADDR(RX_CID) + BCE_L2MQ_RX_HOST_BSEQ,
|
|
sc->rx_prod_bseq);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_EXTREME_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Free memory and clear the RX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_free_rx_chain(struct bce_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_UNLOAD);
|
|
|
|
/* Free any mbufs still in the RX mbuf chain. */
|
|
for (i = 0; i < TOTAL_RX_BD; i++) {
|
|
if (sc->rx_mbuf_ptr[i] != NULL) {
|
|
if (sc->rx_mbuf_map[i] != NULL)
|
|
bus_dmamap_sync(sc->rx_mbuf_tag, sc->rx_mbuf_map[i],
|
|
BUS_DMASYNC_POSTREAD);
|
|
m_freem(sc->rx_mbuf_ptr[i]);
|
|
sc->rx_mbuf_ptr[i] = NULL;
|
|
DBRUN(sc->debug_rx_mbuf_alloc--);
|
|
}
|
|
}
|
|
|
|
/* Clear each RX chain page. */
|
|
for (i = 0; i < RX_PAGES; i++)
|
|
bzero((char *)sc->rx_bd_chain[i], BCE_RX_CHAIN_PAGE_SZ);
|
|
|
|
sc->free_rx_bd = sc->max_rx_bd;
|
|
|
|
/* Check if we lost any mbufs in the process. */
|
|
DBRUNIF((sc->debug_rx_mbuf_alloc),
|
|
BCE_PRINTF("%s(): Memory leak! Lost %d mbufs from rx chain!\n",
|
|
__FUNCTION__, sc->debug_rx_mbuf_alloc));
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_UNLOAD);
|
|
}
|
|
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/****************************************************************************/
|
|
/* Allocate memory and initialize the page data structures. */
|
|
/* Assumes that bce_init_rx_chain() has not already been called. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_init_pg_chain(struct bce_softc *sc)
|
|
{
|
|
struct rx_bd *pgbd;
|
|
int i, rc = 0;
|
|
u32 val;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
|
|
/* Initialize the page producer and consumer indices. */
|
|
sc->pg_prod = 0;
|
|
sc->pg_cons = 0;
|
|
sc->free_pg_bd = USABLE_PG_BD;
|
|
sc->max_pg_bd = USABLE_PG_BD;
|
|
DBRUN(sc->pg_low_watermark = sc->max_pg_bd);
|
|
DBRUN(sc->pg_empty_count = 0);
|
|
|
|
/* Initialize the page next pointer chain entries. */
|
|
for (i = 0; i < PG_PAGES; i++) {
|
|
int j;
|
|
|
|
pgbd = &sc->pg_bd_chain[i][USABLE_PG_BD_PER_PAGE];
|
|
|
|
/* Check if we've reached the last page. */
|
|
if (i == (PG_PAGES - 1))
|
|
j = 0;
|
|
else
|
|
j = i + 1;
|
|
|
|
/* Setup the chain page pointers. */
|
|
pgbd->rx_bd_haddr_hi = htole32(BCE_ADDR_HI(sc->pg_bd_chain_paddr[j]));
|
|
pgbd->rx_bd_haddr_lo = htole32(BCE_ADDR_LO(sc->pg_bd_chain_paddr[j]));
|
|
}
|
|
|
|
/* Setup the MQ BIN mapping for host_pg_bidx. */
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716))
|
|
REG_WR(sc, BCE_MQ_MAP_L2_3, BCE_MQ_MAP_L2_3_DEFAULT);
|
|
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_PG_BUF_SIZE, 0);
|
|
|
|
/* Configure the rx_bd and page chain mbuf cluster size. */
|
|
val = (sc->rx_bd_mbuf_data_len << 16) | sc->pg_bd_mbuf_alloc_size;
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_PG_BUF_SIZE, val);
|
|
|
|
/* Configure the context reserved for jumbo support. */
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_RBDC_KEY,
|
|
BCE_L2CTX_RX_RBDC_JUMBO_KEY);
|
|
|
|
/* Point the hardware to the first page in the page chain. */
|
|
val = BCE_ADDR_HI(sc->pg_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_NX_PG_BDHADDR_HI, val);
|
|
val = BCE_ADDR_LO(sc->pg_bd_chain_paddr[0]);
|
|
CTX_WR(sc, GET_CID_ADDR(RX_CID), BCE_L2CTX_RX_NX_PG_BDHADDR_LO, val);
|
|
|
|
/* Fill up the page chain. */
|
|
bce_fill_pg_chain(sc);
|
|
|
|
for (i = 0; i < PG_PAGES; i++) {
|
|
bus_dmamap_sync(
|
|
sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i],
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
DBRUNMSG(BCE_EXTREME_RECV, bce_dump_pg_chain(sc, 0, TOTAL_PG_BD));
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Add mbufs to the page chain until its full or an mbuf allocation error */
|
|
/* occurs. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_fill_pg_chain(struct bce_softc *sc)
|
|
{
|
|
u16 prod, prod_idx;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_EXTREME_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
|
|
/* Get the page chain prodcuer index. */
|
|
prod = sc->pg_prod;
|
|
|
|
/* Keep filling the page chain until it's full. */
|
|
while (sc->free_pg_bd > 0) {
|
|
prod_idx = PG_CHAIN_IDX(prod);
|
|
if (bce_get_pg_buf(sc, NULL, &prod, &prod_idx)) {
|
|
/* Bail out if we can't add an mbuf to the chain. */
|
|
break;
|
|
}
|
|
prod = NEXT_PG_BD(prod);
|
|
}
|
|
|
|
/* Save the page chain producer index. */
|
|
sc->pg_prod = prod;
|
|
|
|
DBRUNIF(((prod & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE),
|
|
BCE_PRINTF("%s(): Invalid pg_prod value: 0x%04X\n",
|
|
__FUNCTION__, sc->pg_prod));
|
|
|
|
/*
|
|
* Write the mailbox and tell the chip about
|
|
* the new rx_bd's in the page chain.
|
|
*/
|
|
REG_WR16(sc, MB_GET_CID_ADDR(RX_CID) + BCE_L2MQ_RX_HOST_PG_BDIDX,
|
|
sc->pg_prod);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_EXTREME_RECV | BCE_VERBOSE_LOAD |
|
|
BCE_VERBOSE_CTX);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Free memory and clear the RX data structures. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_free_pg_chain(struct bce_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_UNLOAD);
|
|
|
|
/* Free any mbufs still in the mbuf page chain. */
|
|
for (i = 0; i < TOTAL_PG_BD; i++) {
|
|
if (sc->pg_mbuf_ptr[i] != NULL) {
|
|
if (sc->pg_mbuf_map[i] != NULL)
|
|
bus_dmamap_sync(sc->pg_mbuf_tag, sc->pg_mbuf_map[i],
|
|
BUS_DMASYNC_POSTREAD);
|
|
m_freem(sc->pg_mbuf_ptr[i]);
|
|
sc->pg_mbuf_ptr[i] = NULL;
|
|
DBRUN(sc->debug_pg_mbuf_alloc--);
|
|
}
|
|
}
|
|
|
|
/* Clear each page chain pages. */
|
|
for (i = 0; i < PG_PAGES; i++)
|
|
bzero((char *)sc->pg_bd_chain[i], BCE_PG_CHAIN_PAGE_SZ);
|
|
|
|
sc->free_pg_bd = sc->max_pg_bd;
|
|
|
|
/* Check if we lost any mbufs in the process. */
|
|
DBRUNIF((sc->debug_pg_mbuf_alloc),
|
|
BCE_PRINTF("%s(): Memory leak! Lost %d mbufs from page chain!\n",
|
|
__FUNCTION__, sc->debug_pg_mbuf_alloc));
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET | BCE_VERBOSE_RECV | BCE_VERBOSE_UNLOAD);
|
|
}
|
|
#endif /* BCE_USE_SPLIT_HEADER */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Set media options. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
|
|
DBENTER(BCE_VERBOSE);
|
|
|
|
BCE_LOCK(sc);
|
|
bce_ifmedia_upd_locked(ifp);
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE);
|
|
return (0);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Set media options. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_ifmedia_upd_locked(struct ifnet *ifp)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
struct mii_data *mii;
|
|
|
|
DBENTER(BCE_VERBOSE);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
|
|
/* Make sure the MII bus has been enumerated. */
|
|
if (mii) {
|
|
sc->bce_link = 0;
|
|
if (mii->mii_instance) {
|
|
struct mii_softc *miisc;
|
|
|
|
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
|
|
mii_phy_reset(miisc);
|
|
}
|
|
mii_mediachg(mii);
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Reports current media status. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
struct mii_data *mii;
|
|
|
|
DBENTER(BCE_VERBOSE);
|
|
|
|
BCE_LOCK(sc);
|
|
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles PHY generated interrupt events. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_phy_intr(struct bce_softc *sc)
|
|
{
|
|
u32 new_link_state, old_link_state;
|
|
|
|
DBENTER(BCE_VERBOSE_PHY | BCE_VERBOSE_INTR);
|
|
|
|
new_link_state = sc->status_block->status_attn_bits &
|
|
STATUS_ATTN_BITS_LINK_STATE;
|
|
old_link_state = sc->status_block->status_attn_bits_ack &
|
|
STATUS_ATTN_BITS_LINK_STATE;
|
|
|
|
/* Handle any changes if the link state has changed. */
|
|
if (new_link_state != old_link_state) {
|
|
|
|
/* Update the status_attn_bits_ack field in the status block. */
|
|
if (new_link_state) {
|
|
REG_WR(sc, BCE_PCICFG_STATUS_BIT_SET_CMD,
|
|
STATUS_ATTN_BITS_LINK_STATE);
|
|
DBPRINT(sc, BCE_INFO_PHY, "%s(): Link is now UP.\n",
|
|
__FUNCTION__);
|
|
}
|
|
else {
|
|
REG_WR(sc, BCE_PCICFG_STATUS_BIT_CLEAR_CMD,
|
|
STATUS_ATTN_BITS_LINK_STATE);
|
|
DBPRINT(sc, BCE_INFO_PHY, "%s(): Link is now DOWN.\n",
|
|
__FUNCTION__);
|
|
}
|
|
|
|
/*
|
|
* Assume link is down and allow
|
|
* tick routine to update the state
|
|
* based on the actual media state.
|
|
*/
|
|
sc->bce_link = 0;
|
|
callout_stop(&sc->bce_tick_callout);
|
|
bce_tick(sc);
|
|
}
|
|
|
|
/* Acknowledge the link change interrupt. */
|
|
REG_WR(sc, BCE_EMAC_STATUS, BCE_EMAC_STATUS_LINK_CHANGE);
|
|
|
|
DBEXIT(BCE_VERBOSE_PHY | BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Reads the receive consumer value from the status block (skipping over */
|
|
/* chain page pointer if necessary). */
|
|
/* */
|
|
/* Returns: */
|
|
/* hw_cons */
|
|
/****************************************************************************/
|
|
static inline u16
|
|
bce_get_hw_rx_cons(struct bce_softc *sc)
|
|
{
|
|
u16 hw_cons;
|
|
|
|
rmb();
|
|
hw_cons = sc->status_block->status_rx_quick_consumer_index0;
|
|
if ((hw_cons & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE)
|
|
hw_cons++;
|
|
|
|
return hw_cons;
|
|
}
|
|
|
|
/****************************************************************************/
|
|
/* Handles received frame interrupt events. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_rx_intr(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp = sc->bce_ifp;
|
|
struct l2_fhdr *l2fhdr;
|
|
unsigned int pkt_len;
|
|
u16 sw_rx_cons, sw_rx_cons_idx, hw_rx_cons;
|
|
u32 status;
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
unsigned int rem_len;
|
|
u16 sw_pg_cons, sw_pg_cons_idx;
|
|
#endif
|
|
|
|
DBENTER(BCE_VERBOSE_RECV | BCE_VERBOSE_INTR);
|
|
DBRUN(sc->rx_interrupts++);
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(enter): rx_prod = 0x%04X, "
|
|
"rx_cons = 0x%04X, rx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->rx_prod, sc->rx_cons, sc->rx_prod_bseq);
|
|
|
|
/* Prepare the RX chain pages to be accessed by the host CPU. */
|
|
for (int i = 0; i < RX_PAGES; i++)
|
|
bus_dmamap_sync(sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i], BUS_DMASYNC_POSTWRITE);
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/* Prepare the page chain pages to be accessed by the host CPU. */
|
|
for (int i = 0; i < PG_PAGES; i++)
|
|
bus_dmamap_sync(sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i], BUS_DMASYNC_POSTWRITE);
|
|
#endif
|
|
|
|
/* Get the hardware's view of the RX consumer index. */
|
|
hw_rx_cons = sc->hw_rx_cons = bce_get_hw_rx_cons(sc);
|
|
|
|
/* Get working copies of the driver's view of the consumer indices. */
|
|
sw_rx_cons = sc->rx_cons;
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
sw_pg_cons = sc->pg_cons;
|
|
#endif
|
|
|
|
/* Update some debug statistics counters */
|
|
DBRUNIF((sc->free_rx_bd < sc->rx_low_watermark),
|
|
sc->rx_low_watermark = sc->free_rx_bd);
|
|
DBRUNIF((sc->free_rx_bd == sc->max_rx_bd), sc->rx_empty_count++);
|
|
|
|
/* Scan through the receive chain as long as there is work to do */
|
|
/* ToDo: Consider setting a limit on the number of packets processed. */
|
|
rmb();
|
|
while (sw_rx_cons != hw_rx_cons) {
|
|
struct mbuf *m0;
|
|
|
|
/* Convert the producer/consumer indices to an actual rx_bd index. */
|
|
sw_rx_cons_idx = RX_CHAIN_IDX(sw_rx_cons);
|
|
|
|
/* Unmap the mbuf from DMA space. */
|
|
bus_dmamap_sync(sc->rx_mbuf_tag,
|
|
sc->rx_mbuf_map[sw_rx_cons_idx],
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->rx_mbuf_tag,
|
|
sc->rx_mbuf_map[sw_rx_cons_idx]);
|
|
|
|
/* Remove the mbuf from the RX chain. */
|
|
m0 = sc->rx_mbuf_ptr[sw_rx_cons_idx];
|
|
sc->rx_mbuf_ptr[sw_rx_cons_idx] = NULL;
|
|
DBRUN(sc->debug_rx_mbuf_alloc--);
|
|
sc->free_rx_bd++;
|
|
|
|
/*
|
|
* Frames received on the NetXteme II are prepended
|
|
* with an l2_fhdr structure which provides status
|
|
* information about the received frame (including
|
|
* VLAN tags and checksum info). The frames are also
|
|
* automatically adjusted to align the IP header
|
|
* (i.e. two null bytes are inserted before the
|
|
* Ethernet header). As a result the data DMA'd by
|
|
* the controller into the mbuf is as follows:
|
|
* +---------+-----+---------------------+-----+
|
|
* | l2_fhdr | pad | packet data | FCS |
|
|
* +---------+-----+---------------------+-----+
|
|
* The l2_fhdr needs to be checked and skipped and
|
|
* the FCS needs to be stripped before sending the
|
|
* packet up the stack.
|
|
*/
|
|
l2fhdr = mtod(m0, struct l2_fhdr *);
|
|
|
|
/* Get the packet data + FCS length and the status. */
|
|
pkt_len = l2fhdr->l2_fhdr_pkt_len;
|
|
status = l2fhdr->l2_fhdr_status;
|
|
|
|
/*
|
|
* Skip over the l2_fhdr and pad, resulting in the
|
|
* following data in the mbuf:
|
|
* +---------------------+-----+
|
|
* | packet data | FCS |
|
|
* +---------------------+-----+
|
|
*/
|
|
m_adj(m0, sizeof(struct l2_fhdr) + ETHER_ALIGN);
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/*
|
|
* Check whether the received frame fits in a single
|
|
* mbuf or not (i.e. packet data + FCS <=
|
|
* sc->rx_bd_mbuf_data_len bytes).
|
|
*/
|
|
if (pkt_len > m0->m_len) {
|
|
/*
|
|
* The received frame is larger than a single mbuf.
|
|
* If the frame was a TCP frame then only the TCP
|
|
* header is placed in the mbuf, the remaining
|
|
* payload (including FCS) is placed in the page
|
|
* chain, the SPLIT flag is set, and the header
|
|
* length is placed in the IP checksum field.
|
|
* If the frame is not a TCP frame then the mbuf
|
|
* is filled and the remaining bytes are placed
|
|
* in the page chain.
|
|
*/
|
|
|
|
DBPRINT(sc, BCE_INFO_RECV, "%s(): Found a large packet.\n",
|
|
__FUNCTION__);
|
|
|
|
/*
|
|
* When the page chain is enabled and the TCP
|
|
* header has been split from the TCP payload,
|
|
* the ip_xsum structure will reflect the length
|
|
* of the TCP header, not the IP checksum. Set
|
|
* the packet length of the mbuf accordingly.
|
|
*/
|
|
if (status & L2_FHDR_STATUS_SPLIT)
|
|
m0->m_len = l2fhdr->l2_fhdr_ip_xsum;
|
|
|
|
rem_len = pkt_len - m0->m_len;
|
|
|
|
/* Pull mbufs off the page chain for the remaining data. */
|
|
while (rem_len > 0) {
|
|
struct mbuf *m_pg;
|
|
|
|
sw_pg_cons_idx = PG_CHAIN_IDX(sw_pg_cons);
|
|
|
|
/* Remove the mbuf from the page chain. */
|
|
m_pg = sc->pg_mbuf_ptr[sw_pg_cons_idx];
|
|
sc->pg_mbuf_ptr[sw_pg_cons_idx] = NULL;
|
|
DBRUN(sc->debug_pg_mbuf_alloc--);
|
|
sc->free_pg_bd++;
|
|
|
|
/* Unmap the page chain mbuf from DMA space. */
|
|
bus_dmamap_sync(sc->pg_mbuf_tag,
|
|
sc->pg_mbuf_map[sw_pg_cons_idx],
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->pg_mbuf_tag,
|
|
sc->pg_mbuf_map[sw_pg_cons_idx]);
|
|
|
|
/* Adjust the mbuf length. */
|
|
if (rem_len < m_pg->m_len) {
|
|
/* The mbuf chain is complete. */
|
|
m_pg->m_len = rem_len;
|
|
rem_len = 0;
|
|
} else {
|
|
/* More packet data is waiting. */
|
|
rem_len -= m_pg->m_len;
|
|
}
|
|
|
|
/* Concatenate the mbuf cluster to the mbuf. */
|
|
m_cat(m0, m_pg);
|
|
|
|
sw_pg_cons = NEXT_PG_BD(sw_pg_cons);
|
|
}
|
|
|
|
/* Set the total packet length. */
|
|
m0->m_pkthdr.len = pkt_len;
|
|
|
|
} else {
|
|
/*
|
|
* The received packet is small and fits in a
|
|
* single mbuf (i.e. the l2_fhdr + pad + packet +
|
|
* FCS <= MHLEN). In other words, the packet is
|
|
* 154 bytes or less in size.
|
|
*/
|
|
|
|
DBPRINT(sc, BCE_INFO_RECV, "%s(): Found a small packet.\n",
|
|
__FUNCTION__);
|
|
|
|
/* Set the total packet length. */
|
|
m0->m_pkthdr.len = m0->m_len = pkt_len;
|
|
}
|
|
#endif
|
|
|
|
/* Remove the trailing Ethernet FCS. */
|
|
m_adj(m0, -ETHER_CRC_LEN);
|
|
|
|
/* Check that the resulting mbuf chain is valid. */
|
|
DBRUN(m_sanity(m0, FALSE));
|
|
DBRUNIF(((m0->m_len < ETHER_HDR_LEN) |
|
|
(m0->m_pkthdr.len > BCE_MAX_JUMBO_ETHER_MTU_VLAN)),
|
|
BCE_PRINTF("Invalid Ethernet frame size!\n");
|
|
m_print(m0, 128));
|
|
|
|
DBRUNIF(DB_RANDOMTRUE(bce_debug_l2fhdr_status_check),
|
|
BCE_PRINTF("Simulating l2_fhdr status error.\n");
|
|
status = status | L2_FHDR_ERRORS_PHY_DECODE);
|
|
|
|
/* Check the received frame for errors. */
|
|
if (status & (L2_FHDR_ERRORS_BAD_CRC |
|
|
L2_FHDR_ERRORS_PHY_DECODE | L2_FHDR_ERRORS_ALIGNMENT |
|
|
L2_FHDR_ERRORS_TOO_SHORT | L2_FHDR_ERRORS_GIANT_FRAME)) {
|
|
|
|
/* Log the error and release the mbuf. */
|
|
ifp->if_ierrors++;
|
|
DBRUN(sc->l2fhdr_status_errors++);
|
|
|
|
m_freem(m0);
|
|
m0 = NULL;
|
|
goto bce_rx_int_next_rx;
|
|
}
|
|
|
|
/* Send the packet to the appropriate interface. */
|
|
m0->m_pkthdr.rcvif = ifp;
|
|
|
|
/* Assume no hardware checksum. */
|
|
m0->m_pkthdr.csum_flags = 0;
|
|
|
|
/* Validate the checksum if offload enabled. */
|
|
if (ifp->if_capenable & IFCAP_RXCSUM) {
|
|
|
|
/* Check for an IP datagram. */
|
|
if (!(status & L2_FHDR_STATUS_SPLIT) &&
|
|
(status & L2_FHDR_STATUS_IP_DATAGRAM)) {
|
|
m0->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
|
|
|
|
/* Check if the IP checksum is valid. */
|
|
if ((l2fhdr->l2_fhdr_ip_xsum ^ 0xffff) == 0)
|
|
m0->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
}
|
|
|
|
/* Check for a valid TCP/UDP frame. */
|
|
if (status & (L2_FHDR_STATUS_TCP_SEGMENT |
|
|
L2_FHDR_STATUS_UDP_DATAGRAM)) {
|
|
|
|
/* Check for a good TCP/UDP checksum. */
|
|
if ((status & (L2_FHDR_ERRORS_TCP_XSUM |
|
|
L2_FHDR_ERRORS_UDP_XSUM)) == 0) {
|
|
m0->m_pkthdr.csum_data =
|
|
l2fhdr->l2_fhdr_tcp_udp_xsum;
|
|
m0->m_pkthdr.csum_flags |= (CSUM_DATA_VALID
|
|
| CSUM_PSEUDO_HDR);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we received a packet with a vlan tag,
|
|
* attach that information to the packet.
|
|
*/
|
|
if (status & L2_FHDR_STATUS_L2_VLAN_TAG) {
|
|
#if __FreeBSD_version < 700000
|
|
VLAN_INPUT_TAG(ifp, m0, l2fhdr->l2_fhdr_vlan_tag, continue);
|
|
#else
|
|
m0->m_pkthdr.ether_vtag = l2fhdr->l2_fhdr_vlan_tag;
|
|
m0->m_flags |= M_VLANTAG;
|
|
#endif
|
|
}
|
|
|
|
/* Pass the mbuf off to the upper layers. */
|
|
ifp->if_ipackets++;
|
|
|
|
bce_rx_int_next_rx:
|
|
sw_rx_cons = NEXT_RX_BD(sw_rx_cons);
|
|
|
|
/* If we have a packet, pass it up the stack */
|
|
if (m0) {
|
|
/* Make sure we don't lose our place when we release the lock. */
|
|
sc->rx_cons = sw_rx_cons;
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
sc->pg_cons = sw_pg_cons;
|
|
#endif
|
|
|
|
BCE_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m0);
|
|
BCE_LOCK(sc);
|
|
|
|
/* Recover our place. */
|
|
sw_rx_cons = sc->rx_cons;
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
sw_pg_cons = sc->pg_cons;
|
|
#endif
|
|
}
|
|
|
|
/* Refresh hw_cons to see if there's new work */
|
|
if (sw_rx_cons == hw_rx_cons)
|
|
hw_rx_cons = sc->hw_rx_cons = bce_get_hw_rx_cons(sc);
|
|
}
|
|
|
|
/* No new packets to process. Refill the RX and page chains and exit. */
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
sc->pg_cons = sw_pg_cons;
|
|
bce_fill_pg_chain(sc);
|
|
#endif
|
|
|
|
sc->rx_cons = sw_rx_cons;
|
|
bce_fill_rx_chain(sc);
|
|
|
|
for (int i = 0; i < RX_PAGES; i++)
|
|
bus_dmamap_sync(sc->rx_bd_chain_tag,
|
|
sc->rx_bd_chain_map[i], BUS_DMASYNC_PREWRITE);
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
for (int i = 0; i < PG_PAGES; i++)
|
|
bus_dmamap_sync(sc->pg_bd_chain_tag,
|
|
sc->pg_bd_chain_map[i], BUS_DMASYNC_PREWRITE);
|
|
#endif
|
|
|
|
DBPRINT(sc, BCE_EXTREME_RECV, "%s(exit): rx_prod = 0x%04X, "
|
|
"rx_cons = 0x%04X, rx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->rx_prod, sc->rx_cons, sc->rx_prod_bseq);
|
|
DBEXIT(BCE_VERBOSE_RECV | BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Reads the transmit consumer value from the status block (skipping over */
|
|
/* chain page pointer if necessary). */
|
|
/* */
|
|
/* Returns: */
|
|
/* hw_cons */
|
|
/****************************************************************************/
|
|
static inline u16
|
|
bce_get_hw_tx_cons(struct bce_softc *sc)
|
|
{
|
|
u16 hw_cons;
|
|
|
|
mb();
|
|
hw_cons = sc->status_block->status_tx_quick_consumer_index0;
|
|
if ((hw_cons & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE)
|
|
hw_cons++;
|
|
|
|
return hw_cons;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles transmit completion interrupt events. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_tx_intr(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp = sc->bce_ifp;
|
|
u16 hw_tx_cons, sw_tx_cons, sw_tx_chain_cons;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND | BCE_VERBOSE_INTR);
|
|
DBRUN(sc->tx_interrupts++);
|
|
DBPRINT(sc, BCE_EXTREME_SEND, "%s(enter): tx_prod = 0x%04X, "
|
|
"tx_cons = 0x%04X, tx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->tx_prod, sc->tx_cons, sc->tx_prod_bseq);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* Get the hardware's view of the TX consumer index. */
|
|
hw_tx_cons = sc->hw_tx_cons = bce_get_hw_tx_cons(sc);
|
|
sw_tx_cons = sc->tx_cons;
|
|
|
|
/* Prevent speculative reads from getting ahead of the status block. */
|
|
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
|
|
BUS_SPACE_BARRIER_READ);
|
|
|
|
/* Cycle through any completed TX chain page entries. */
|
|
while (sw_tx_cons != hw_tx_cons) {
|
|
#ifdef BCE_DEBUG
|
|
struct tx_bd *txbd = NULL;
|
|
#endif
|
|
sw_tx_chain_cons = TX_CHAIN_IDX(sw_tx_cons);
|
|
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(): hw_tx_cons = 0x%04X, sw_tx_cons = 0x%04X, "
|
|
"sw_tx_chain_cons = 0x%04X\n",
|
|
__FUNCTION__, hw_tx_cons, sw_tx_cons, sw_tx_chain_cons);
|
|
|
|
DBRUNIF((sw_tx_chain_cons > MAX_TX_BD),
|
|
BCE_PRINTF("%s(%d): TX chain consumer out of range! "
|
|
" 0x%04X > 0x%04X\n", __FILE__, __LINE__, sw_tx_chain_cons,
|
|
(int) MAX_TX_BD);
|
|
bce_breakpoint(sc));
|
|
|
|
DBRUN(txbd = &sc->tx_bd_chain[TX_PAGE(sw_tx_chain_cons)]
|
|
[TX_IDX(sw_tx_chain_cons)]);
|
|
|
|
DBRUNIF((txbd == NULL),
|
|
BCE_PRINTF("%s(%d): Unexpected NULL tx_bd[0x%04X]!\n",
|
|
__FILE__, __LINE__, sw_tx_chain_cons);
|
|
bce_breakpoint(sc));
|
|
|
|
DBRUNMSG(BCE_INFO_SEND, BCE_PRINTF("%s(): ", __FUNCTION__);
|
|
bce_dump_txbd(sc, sw_tx_chain_cons, txbd));
|
|
|
|
/*
|
|
* Free the associated mbuf. Remember
|
|
* that only the last tx_bd of a packet
|
|
* has an mbuf pointer and DMA map.
|
|
*/
|
|
if (sc->tx_mbuf_ptr[sw_tx_chain_cons] != NULL) {
|
|
|
|
/* Validate that this is the last tx_bd. */
|
|
DBRUNIF((!(txbd->tx_bd_flags & TX_BD_FLAGS_END)),
|
|
BCE_PRINTF("%s(%d): tx_bd END flag not set but "
|
|
"txmbuf == NULL!\n", __FILE__, __LINE__);
|
|
bce_breakpoint(sc));
|
|
|
|
DBRUNMSG(BCE_INFO_SEND,
|
|
BCE_PRINTF("%s(): Unloading map/freeing mbuf "
|
|
"from tx_bd[0x%04X]\n", __FUNCTION__, sw_tx_chain_cons));
|
|
|
|
/* Unmap the mbuf. */
|
|
bus_dmamap_unload(sc->tx_mbuf_tag,
|
|
sc->tx_mbuf_map[sw_tx_chain_cons]);
|
|
|
|
/* Free the mbuf. */
|
|
m_freem(sc->tx_mbuf_ptr[sw_tx_chain_cons]);
|
|
sc->tx_mbuf_ptr[sw_tx_chain_cons] = NULL;
|
|
DBRUN(sc->debug_tx_mbuf_alloc--);
|
|
|
|
ifp->if_opackets++;
|
|
}
|
|
|
|
sc->used_tx_bd--;
|
|
sw_tx_cons = NEXT_TX_BD(sw_tx_cons);
|
|
|
|
/* Refresh hw_cons to see if there's new work. */
|
|
hw_tx_cons = sc->hw_tx_cons = bce_get_hw_tx_cons(sc);
|
|
|
|
/* Prevent speculative reads from getting ahead of the status block. */
|
|
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
|
|
BUS_SPACE_BARRIER_READ);
|
|
}
|
|
|
|
/* Clear the TX timeout timer. */
|
|
sc->watchdog_timer = 0;
|
|
|
|
/* Clear the tx hardware queue full flag. */
|
|
if (sc->used_tx_bd < sc->max_tx_bd) {
|
|
DBRUNIF((ifp->if_drv_flags & IFF_DRV_OACTIVE),
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(): Open TX chain! %d/%d (used/total)\n",
|
|
__FUNCTION__, sc->used_tx_bd, sc->max_tx_bd));
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
}
|
|
|
|
sc->tx_cons = sw_tx_cons;
|
|
|
|
DBPRINT(sc, BCE_EXTREME_SEND, "%s(exit): tx_prod = 0x%04X, "
|
|
"tx_cons = 0x%04X, tx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->tx_prod, sc->tx_cons, sc->tx_prod_bseq);
|
|
DBEXIT(BCE_VERBOSE_SEND | BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Disables interrupt generation. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_disable_intr(struct bce_softc *sc)
|
|
{
|
|
DBENTER(BCE_VERBOSE_INTR);
|
|
|
|
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD, BCE_PCICFG_INT_ACK_CMD_MASK_INT);
|
|
REG_RD(sc, BCE_PCICFG_INT_ACK_CMD);
|
|
|
|
DBEXIT(BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Enables interrupt generation. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_enable_intr(struct bce_softc *sc, int coal_now)
|
|
{
|
|
DBENTER(BCE_VERBOSE_INTR);
|
|
|
|
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
|
|
BCE_PCICFG_INT_ACK_CMD_INDEX_VALID |
|
|
BCE_PCICFG_INT_ACK_CMD_MASK_INT | sc->last_status_idx);
|
|
|
|
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
|
|
BCE_PCICFG_INT_ACK_CMD_INDEX_VALID | sc->last_status_idx);
|
|
|
|
/* Force an immediate interrupt (whether there is new data or not). */
|
|
if (coal_now)
|
|
REG_WR(sc, BCE_HC_COMMAND, sc->hc_command | BCE_HC_COMMAND_COAL_NOW);
|
|
|
|
DBEXIT(BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles controller initialization. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init_locked(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
u32 ether_mtu = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
/* Check if the driver is still running and bail out if it is. */
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
goto bce_init_locked_exit;
|
|
|
|
bce_stop(sc);
|
|
|
|
if (bce_reset(sc, BCE_DRV_MSG_CODE_RESET)) {
|
|
BCE_PRINTF("%s(%d): Controller reset failed!\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_init_locked_exit;
|
|
}
|
|
|
|
if (bce_chipinit(sc)) {
|
|
BCE_PRINTF("%s(%d): Controller initialization failed!\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_init_locked_exit;
|
|
}
|
|
|
|
if (bce_blockinit(sc)) {
|
|
BCE_PRINTF("%s(%d): Block initialization failed!\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_init_locked_exit;
|
|
}
|
|
|
|
/* Load our MAC address. */
|
|
bcopy(IF_LLADDR(sc->bce_ifp), sc->eaddr, ETHER_ADDR_LEN);
|
|
bce_set_mac_addr(sc);
|
|
|
|
/*
|
|
* Calculate and program the hardware Ethernet MTU
|
|
* size. Be generous on the receive if we have room.
|
|
*/
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
if (ifp->if_mtu <= (sc->rx_bd_mbuf_data_len + sc->pg_bd_mbuf_alloc_size))
|
|
ether_mtu = sc->rx_bd_mbuf_data_len + sc->pg_bd_mbuf_alloc_size;
|
|
#else
|
|
if (ifp->if_mtu <= sc->rx_bd_mbuf_data_len)
|
|
ether_mtu = sc->rx_bd_mbuf_data_len;
|
|
#endif
|
|
else
|
|
ether_mtu = ifp->if_mtu;
|
|
|
|
ether_mtu += ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN + ETHER_CRC_LEN;
|
|
|
|
DBPRINT(sc, BCE_INFO_MISC, "%s(): setting h/w mtu = %d\n", __FUNCTION__,
|
|
ether_mtu);
|
|
|
|
/* Program the mtu, enabling jumbo frame support if necessary. */
|
|
if (ether_mtu > (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN))
|
|
REG_WR(sc, BCE_EMAC_RX_MTU_SIZE,
|
|
min(ether_mtu, BCE_MAX_JUMBO_ETHER_MTU) |
|
|
BCE_EMAC_RX_MTU_SIZE_JUMBO_ENA);
|
|
else
|
|
REG_WR(sc, BCE_EMAC_RX_MTU_SIZE, ether_mtu);
|
|
|
|
DBPRINT(sc, BCE_INFO_LOAD,
|
|
"%s(): rx_bd_mbuf_alloc_size = %d, rx_bce_mbuf_data_len = %d, "
|
|
"rx_bd_mbuf_align_pad = %d, pg_bd_mbuf_alloc_size = %d\n",
|
|
__FUNCTION__, sc->rx_bd_mbuf_alloc_size, sc->rx_bd_mbuf_data_len,
|
|
sc->rx_bd_mbuf_align_pad, sc->pg_bd_mbuf_alloc_size);
|
|
|
|
/* Program appropriate promiscuous/multicast filtering. */
|
|
bce_set_rx_mode(sc);
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/* Init page buffer descriptor chain. */
|
|
bce_init_pg_chain(sc);
|
|
#endif
|
|
|
|
/* Init RX buffer descriptor chain. */
|
|
bce_init_rx_chain(sc);
|
|
|
|
/* Init TX buffer descriptor chain. */
|
|
bce_init_tx_chain(sc);
|
|
|
|
/* Enable host interrupts. */
|
|
bce_enable_intr(sc, 1);
|
|
|
|
bce_ifmedia_upd_locked(ifp);
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
callout_reset(&sc->bce_tick_callout, hz, bce_tick, sc);
|
|
|
|
bce_init_locked_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Initialize the controller just enough so that any management firmware */
|
|
/* running on the device will continue to operate correctly. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_mgmt_init_locked(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* Bail out if management firmware is not running. */
|
|
if (!(sc->bce_flags & BCE_MFW_ENABLE_FLAG)) {
|
|
DBPRINT(sc, BCE_VERBOSE_SPECIAL,
|
|
"No management firmware running...\n");
|
|
goto bce_mgmt_init_locked_exit;
|
|
}
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
/* Enable all critical blocks in the MAC. */
|
|
REG_WR(sc, BCE_MISC_ENABLE_SET_BITS, BCE_MISC_ENABLE_DEFAULT);
|
|
REG_RD(sc, BCE_MISC_ENABLE_SET_BITS);
|
|
DELAY(20);
|
|
|
|
bce_ifmedia_upd_locked(ifp);
|
|
|
|
bce_mgmt_init_locked_exit:
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles controller initialization when called from an unlocked routine. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_init(void *xsc)
|
|
{
|
|
struct bce_softc *sc = xsc;
|
|
|
|
DBENTER(BCE_VERBOSE_RESET);
|
|
|
|
BCE_LOCK(sc);
|
|
bce_init_locked(sc);
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_RESET);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Encapsultes an mbuf cluster into the tx_bd chain structure and makes the */
|
|
/* memory visible to the controller. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/* Modified: */
|
|
/* m_head: May be set to NULL if MBUF is excessively fragmented. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_tx_encap(struct bce_softc *sc, struct mbuf **m_head)
|
|
{
|
|
bus_dma_segment_t segs[BCE_MAX_SEGMENTS];
|
|
bus_dmamap_t map;
|
|
struct tx_bd *txbd = NULL;
|
|
struct mbuf *m0;
|
|
struct ether_vlan_header *eh;
|
|
struct ip *ip;
|
|
struct tcphdr *th;
|
|
u16 prod, chain_prod, etype, mss = 0, vlan_tag = 0, flags = 0;
|
|
u32 prod_bseq;
|
|
int hdr_len = 0, e_hlen = 0, ip_hlen = 0, tcp_hlen = 0, ip_len = 0;
|
|
|
|
#ifdef BCE_DEBUG
|
|
u16 debug_prod;
|
|
#endif
|
|
int i, error, nsegs, rc = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND);
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(enter): tx_prod = 0x%04X, tx_chain_prod = %04X, "
|
|
"tx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->tx_prod, (u16) TX_CHAIN_IDX(sc->tx_prod),
|
|
sc->tx_prod_bseq);
|
|
|
|
/* Transfer any checksum offload flags to the bd. */
|
|
m0 = *m_head;
|
|
if (m0->m_pkthdr.csum_flags) {
|
|
if (m0->m_pkthdr.csum_flags & CSUM_IP)
|
|
flags |= TX_BD_FLAGS_IP_CKSUM;
|
|
if (m0->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP))
|
|
flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
|
|
if (m0->m_pkthdr.csum_flags & CSUM_TSO) {
|
|
/* For TSO the controller needs two pieces of info, */
|
|
/* the MSS and the IP+TCP options length. */
|
|
mss = htole16(m0->m_pkthdr.tso_segsz);
|
|
|
|
/* Map the header and find the Ethernet type & header length */
|
|
eh = mtod(m0, struct ether_vlan_header *);
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
etype = ntohs(eh->evl_proto);
|
|
e_hlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
} else {
|
|
etype = ntohs(eh->evl_encap_proto);
|
|
e_hlen = ETHER_HDR_LEN;
|
|
}
|
|
|
|
/* Check for supported TSO Ethernet types (only IPv4 for now) */
|
|
switch (etype) {
|
|
case ETHERTYPE_IP:
|
|
ip = (struct ip *)(m0->m_data + e_hlen);
|
|
|
|
/* TSO only supported for TCP protocol */
|
|
if (ip->ip_p != IPPROTO_TCP) {
|
|
BCE_PRINTF("%s(%d): TSO enabled for non-TCP frame!.\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_tx_encap_skip_tso;
|
|
}
|
|
|
|
/* Get IP header length in bytes (min 20) */
|
|
ip_hlen = ip->ip_hl << 2;
|
|
|
|
/* Get the TCP header length in bytes (min 20) */
|
|
th = (struct tcphdr *)((caddr_t)ip + ip_hlen);
|
|
tcp_hlen = (th->th_off << 2);
|
|
|
|
/* IP header length and checksum will be calc'd by hardware */
|
|
ip_len = ip->ip_len;
|
|
ip->ip_len = 0;
|
|
ip->ip_sum = 0;
|
|
break;
|
|
case ETHERTYPE_IPV6:
|
|
BCE_PRINTF("%s(%d): TSO over IPv6 not supported!.\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_tx_encap_skip_tso;
|
|
default:
|
|
BCE_PRINTF("%s(%d): TSO enabled for unsupported protocol!.\n",
|
|
__FILE__, __LINE__);
|
|
goto bce_tx_encap_skip_tso;
|
|
}
|
|
|
|
hdr_len = e_hlen + ip_hlen + tcp_hlen;
|
|
|
|
DBPRINT(sc, BCE_EXTREME_SEND,
|
|
"%s(): hdr_len = %d, e_hlen = %d, ip_hlen = %d, tcp_hlen = %d, ip_len = %d\n",
|
|
__FUNCTION__, hdr_len, e_hlen, ip_hlen, tcp_hlen, ip_len);
|
|
|
|
/* Set the LSO flag in the TX BD */
|
|
flags |= TX_BD_FLAGS_SW_LSO;
|
|
/* Set the length of IP + TCP options (in 32 bit words) */
|
|
flags |= (((ip_hlen + tcp_hlen - 40) >> 2) << 8);
|
|
|
|
bce_tx_encap_skip_tso:
|
|
DBRUN(sc->requested_tso_frames++);
|
|
}
|
|
}
|
|
|
|
/* Transfer any VLAN tags to the bd. */
|
|
if (m0->m_flags & M_VLANTAG) {
|
|
flags |= TX_BD_FLAGS_VLAN_TAG;
|
|
vlan_tag = m0->m_pkthdr.ether_vtag;
|
|
}
|
|
|
|
/* Map the mbuf into DMAable memory. */
|
|
prod = sc->tx_prod;
|
|
chain_prod = TX_CHAIN_IDX(prod);
|
|
map = sc->tx_mbuf_map[chain_prod];
|
|
|
|
/* Map the mbuf into our DMA address space. */
|
|
error = bus_dmamap_load_mbuf_sg(sc->tx_mbuf_tag, map, m0,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
/* Check if the DMA mapping was successful */
|
|
if (error == EFBIG) {
|
|
|
|
/* The mbuf is too fragmented for our DMA mapping. */
|
|
DBPRINT(sc, BCE_WARN, "%s(): fragmented mbuf (%d pieces)\n",
|
|
__FUNCTION__, nsegs);
|
|
DBRUN(bce_dump_mbuf(sc, m0););
|
|
|
|
/* Try to defrag the mbuf. */
|
|
m0 = m_defrag(*m_head, M_DONTWAIT);
|
|
if (m0 == NULL) {
|
|
/* Defrag was unsuccessful */
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
sc->mbuf_alloc_failed++;
|
|
rc = ENOBUFS;
|
|
goto bce_tx_encap_exit;
|
|
}
|
|
|
|
/* Defrag was successful, try mapping again */
|
|
*m_head = m0;
|
|
error = bus_dmamap_load_mbuf_sg(sc->tx_mbuf_tag, map, m0,
|
|
segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
/* Still getting an error after a defrag. */
|
|
if (error == ENOMEM) {
|
|
/* Insufficient DMA buffers available. */
|
|
sc->tx_dma_map_failures++;
|
|
rc = error;
|
|
goto bce_tx_encap_exit;
|
|
} else if (error != 0) {
|
|
/* Still can't map the mbuf, release it and return an error. */
|
|
BCE_PRINTF(
|
|
"%s(%d): Unknown error mapping mbuf into TX chain!\n",
|
|
__FILE__, __LINE__);
|
|
m_freem(m0);
|
|
*m_head = NULL;
|
|
sc->tx_dma_map_failures++;
|
|
rc = ENOBUFS;
|
|
goto bce_tx_encap_exit;
|
|
}
|
|
} else if (error == ENOMEM) {
|
|
/* Insufficient DMA buffers available. */
|
|
sc->tx_dma_map_failures++;
|
|
rc = error;
|
|
goto bce_tx_encap_exit;
|
|
} else if (error != 0) {
|
|
m_freem(m0);
|
|
*m_head = NULL;
|
|
sc->tx_dma_map_failures++;
|
|
rc = error;
|
|
goto bce_tx_encap_exit;
|
|
}
|
|
|
|
/* Make sure there's room in the chain */
|
|
if (nsegs > (sc->max_tx_bd - sc->used_tx_bd)) {
|
|
bus_dmamap_unload(sc->tx_mbuf_tag, map);
|
|
rc = ENOBUFS;
|
|
goto bce_tx_encap_exit;
|
|
}
|
|
|
|
/* prod points to an empty tx_bd at this point. */
|
|
prod_bseq = sc->tx_prod_bseq;
|
|
|
|
#ifdef BCE_DEBUG
|
|
debug_prod = chain_prod;
|
|
#endif
|
|
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(start): prod = 0x%04X, chain_prod = 0x%04X, "
|
|
"prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, prod, chain_prod, prod_bseq);
|
|
|
|
/*
|
|
* Cycle through each mbuf segment that makes up
|
|
* the outgoing frame, gathering the mapping info
|
|
* for that segment and creating a tx_bd for
|
|
* the mbuf.
|
|
*/
|
|
for (i = 0; i < nsegs ; i++) {
|
|
|
|
chain_prod = TX_CHAIN_IDX(prod);
|
|
txbd= &sc->tx_bd_chain[TX_PAGE(chain_prod)][TX_IDX(chain_prod)];
|
|
|
|
txbd->tx_bd_haddr_lo = htole32(BCE_ADDR_LO(segs[i].ds_addr));
|
|
txbd->tx_bd_haddr_hi = htole32(BCE_ADDR_HI(segs[i].ds_addr));
|
|
txbd->tx_bd_mss_nbytes = htole32(mss << 16) | htole16(segs[i].ds_len);
|
|
txbd->tx_bd_vlan_tag = htole16(vlan_tag);
|
|
txbd->tx_bd_flags = htole16(flags);
|
|
prod_bseq += segs[i].ds_len;
|
|
if (i == 0)
|
|
txbd->tx_bd_flags |= htole16(TX_BD_FLAGS_START);
|
|
prod = NEXT_TX_BD(prod);
|
|
}
|
|
|
|
/* Set the END flag on the last TX buffer descriptor. */
|
|
txbd->tx_bd_flags |= htole16(TX_BD_FLAGS_END);
|
|
|
|
DBRUNMSG(BCE_EXTREME_SEND, bce_dump_tx_chain(sc, debug_prod, nsegs));
|
|
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s( end ): prod = 0x%04X, chain_prod = 0x%04X, "
|
|
"prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, prod, chain_prod, prod_bseq);
|
|
|
|
/*
|
|
* Ensure that the mbuf pointer for this transmission
|
|
* is placed at the array index of the last
|
|
* descriptor in this chain. This is done
|
|
* because a single map is used for all
|
|
* segments of the mbuf and we don't want to
|
|
* unload the map before all of the segments
|
|
* have been freed.
|
|
*/
|
|
sc->tx_mbuf_ptr[chain_prod] = m0;
|
|
sc->used_tx_bd += nsegs;
|
|
|
|
/* Update some debug statistic counters */
|
|
DBRUNIF((sc->used_tx_bd > sc->tx_hi_watermark),
|
|
sc->tx_hi_watermark = sc->used_tx_bd);
|
|
DBRUNIF((sc->used_tx_bd == sc->max_tx_bd), sc->tx_full_count++);
|
|
DBRUNIF(sc->debug_tx_mbuf_alloc++);
|
|
|
|
DBRUNMSG(BCE_EXTREME_SEND, bce_dump_tx_mbuf_chain(sc, chain_prod, 1));
|
|
|
|
/* prod points to the next free tx_bd at this point. */
|
|
sc->tx_prod = prod;
|
|
sc->tx_prod_bseq = prod_bseq;
|
|
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(exit): prod = 0x%04X, chain_prod = %04X, "
|
|
"prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, sc->tx_prod, (u16) TX_CHAIN_IDX(sc->tx_prod),
|
|
sc->tx_prod_bseq);
|
|
|
|
bce_tx_encap_exit:
|
|
DBEXIT(BCE_VERBOSE_SEND);
|
|
return(rc);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Main transmit routine when called from another routine with a lock. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_start_locked(struct ifnet *ifp)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
struct mbuf *m_head = NULL;
|
|
int count = 0;
|
|
u16 tx_prod, tx_chain_prod;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND | BCE_VERBOSE_CTX);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* prod points to the next free tx_bd. */
|
|
tx_prod = sc->tx_prod;
|
|
tx_chain_prod = TX_CHAIN_IDX(tx_prod);
|
|
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"%s(enter): tx_prod = 0x%04X, tx_chain_prod = 0x%04X, "
|
|
"tx_prod_bseq = 0x%08X\n",
|
|
__FUNCTION__, tx_prod, tx_chain_prod, sc->tx_prod_bseq);
|
|
|
|
/* If there's no link or the transmit queue is empty then just exit. */
|
|
if (!sc->bce_link) {
|
|
DBPRINT(sc, BCE_INFO_SEND, "%s(): No link.\n",
|
|
__FUNCTION__);
|
|
goto bce_start_locked_exit;
|
|
}
|
|
|
|
if (IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
|
|
DBPRINT(sc, BCE_INFO_SEND, "%s(): Transmit queue empty.\n",
|
|
__FUNCTION__);
|
|
goto bce_start_locked_exit;
|
|
}
|
|
|
|
/*
|
|
* Keep adding entries while there is space in the ring.
|
|
*/
|
|
while (sc->used_tx_bd < sc->max_tx_bd) {
|
|
|
|
/* Check for any frames to send. */
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
|
|
/* Stop when the transmit queue is empty. */
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
/*
|
|
* Pack the data into the transmit ring. If we
|
|
* don't have room, place the mbuf back at the
|
|
* head of the queue and set the OACTIVE flag
|
|
* to wait for the NIC to drain the chain.
|
|
*/
|
|
if (bce_tx_encap(sc, &m_head)) {
|
|
/* No room, put the frame back on the transmit queue. */
|
|
if (m_head != NULL)
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
DBPRINT(sc, BCE_INFO_SEND,
|
|
"TX chain is closed for business! Total tx_bd used = %d\n",
|
|
sc->used_tx_bd);
|
|
break;
|
|
}
|
|
|
|
count++;
|
|
|
|
/* Send a copy of the frame to any BPF listeners. */
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
}
|
|
|
|
/* Exit if no packets were dequeued. */
|
|
if (count == 0) {
|
|
DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): No packets were dequeued\n",
|
|
__FUNCTION__);
|
|
goto bce_start_locked_exit;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): Inserted %d frames into send queue.\n",
|
|
__FUNCTION__, count);
|
|
|
|
REG_WR(sc, BCE_MQ_COMMAND, REG_RD(sc, BCE_MQ_COMMAND) | BCE_MQ_COMMAND_NO_MAP_ERROR);
|
|
|
|
/* Write the mailbox and tell the chip about the waiting tx_bd's. */
|
|
DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): MB_GET_CID_ADDR(TX_CID) = 0x%08X; "
|
|
"BCE_L2MQ_TX_HOST_BIDX = 0x%08X, sc->tx_prod = 0x%04X\n",
|
|
__FUNCTION__,
|
|
MB_GET_CID_ADDR(TX_CID), BCE_L2MQ_TX_HOST_BIDX, sc->tx_prod);
|
|
REG_WR16(sc, MB_GET_CID_ADDR(TX_CID) + BCE_L2MQ_TX_HOST_BIDX, sc->tx_prod);
|
|
DBPRINT(sc, BCE_VERBOSE_SEND, "%s(): MB_GET_CID_ADDR(TX_CID) = 0x%08X; "
|
|
"BCE_L2MQ_TX_HOST_BSEQ = 0x%08X, sc->tx_prod_bseq = 0x%04X\n",
|
|
__FUNCTION__,
|
|
MB_GET_CID_ADDR(TX_CID), BCE_L2MQ_TX_HOST_BSEQ, sc->tx_prod_bseq);
|
|
REG_WR(sc, MB_GET_CID_ADDR(TX_CID) + BCE_L2MQ_TX_HOST_BSEQ, sc->tx_prod_bseq);
|
|
|
|
/* Set the tx timeout. */
|
|
sc->watchdog_timer = BCE_TX_TIMEOUT;
|
|
|
|
DBRUNMSG(BCE_VERBOSE_SEND, bce_dump_ctx(sc, TX_CID));
|
|
DBRUNMSG(BCE_VERBOSE_SEND, bce_dump_mq_regs(sc));
|
|
|
|
bce_start_locked_exit:
|
|
DBEXIT(BCE_VERBOSE_SEND | BCE_VERBOSE_CTX);
|
|
return;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Main transmit routine when called from another routine without a lock. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_start(struct ifnet *ifp)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND);
|
|
|
|
BCE_LOCK(sc);
|
|
bce_start_locked(ifp);
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_SEND);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Handles any IOCTL calls from the operating system. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct bce_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct mii_data *mii;
|
|
int mask, error = 0;
|
|
|
|
DBENTER(BCE_VERBOSE_MISC);
|
|
|
|
switch(command) {
|
|
|
|
/* Set the interface MTU. */
|
|
case SIOCSIFMTU:
|
|
/* Check that the MTU setting is supported. */
|
|
if ((ifr->ifr_mtu < BCE_MIN_MTU) ||
|
|
(ifr->ifr_mtu > BCE_MAX_JUMBO_MTU)) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
DBPRINT(sc, BCE_INFO_MISC,
|
|
"SIOCSIFMTU: Changing MTU from %d to %d\n",
|
|
(int) ifp->if_mtu, (int) ifr->ifr_mtu);
|
|
|
|
BCE_LOCK(sc);
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/* No buffer allocation size changes are necessary. */
|
|
#else
|
|
/* Recalculate our buffer allocation sizes. */
|
|
if ((ifp->if_mtu + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN + ETHER_CRC_LEN) > MCLBYTES) {
|
|
sc->rx_bd_mbuf_alloc_size = MJUM9BYTES;
|
|
sc->rx_bd_mbuf_align_pad = roundup2(MJUM9BYTES, 16) - MJUM9BYTES;
|
|
sc->rx_bd_mbuf_data_len = sc->rx_bd_mbuf_alloc_size -
|
|
sc->rx_bd_mbuf_align_pad;
|
|
} else {
|
|
sc->rx_bd_mbuf_alloc_size = MCLBYTES;
|
|
sc->rx_bd_mbuf_align_pad = roundup2(MCLBYTES, 16) - MCLBYTES;
|
|
sc->rx_bd_mbuf_data_len = sc->rx_bd_mbuf_alloc_size -
|
|
sc->rx_bd_mbuf_align_pad;
|
|
}
|
|
#endif
|
|
|
|
bce_init_locked(sc);
|
|
BCE_UNLOCK(sc);
|
|
break;
|
|
|
|
/* Set interface flags. */
|
|
case SIOCSIFFLAGS:
|
|
DBPRINT(sc, BCE_VERBOSE_SPECIAL, "Received SIOCSIFFLAGS\n");
|
|
|
|
BCE_LOCK(sc);
|
|
|
|
/* Check if the interface is up. */
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
/* Change promiscuous/multicast flags as necessary. */
|
|
bce_set_rx_mode(sc);
|
|
} else {
|
|
/* Start the HW */
|
|
bce_init_locked(sc);
|
|
}
|
|
} else {
|
|
/* The interface is down, check if driver is running. */
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
bce_stop(sc);
|
|
|
|
/* If MFW is running, restart the controller a bit. */
|
|
if (sc->bce_flags & BCE_MFW_ENABLE_FLAG) {
|
|
bce_reset(sc, BCE_DRV_MSG_CODE_RESET);
|
|
bce_chipinit(sc);
|
|
bce_mgmt_init_locked(sc);
|
|
}
|
|
}
|
|
}
|
|
|
|
BCE_UNLOCK(sc);
|
|
error = 0;
|
|
|
|
break;
|
|
|
|
/* Add/Delete multicast address */
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
DBPRINT(sc, BCE_VERBOSE_MISC, "Received SIOCADDMULTI/SIOCDELMULTI\n");
|
|
|
|
BCE_LOCK(sc);
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
bce_set_rx_mode(sc);
|
|
error = 0;
|
|
}
|
|
BCE_UNLOCK(sc);
|
|
|
|
break;
|
|
|
|
/* Set/Get Interface media */
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
DBPRINT(sc, BCE_VERBOSE_MISC, "Received SIOCSIFMEDIA/SIOCGIFMEDIA\n");
|
|
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr,
|
|
&mii->mii_media, command);
|
|
break;
|
|
|
|
/* Set interface capability */
|
|
case SIOCSIFCAP:
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
DBPRINT(sc, BCE_INFO_MISC, "Received SIOCSIFCAP = 0x%08X\n", (u32) mask);
|
|
|
|
/* Toggle the TX checksum capabilites enable flag. */
|
|
if (mask & IFCAP_TXCSUM) {
|
|
ifp->if_capenable ^= IFCAP_TXCSUM;
|
|
if (IFCAP_TXCSUM & ifp->if_capenable)
|
|
ifp->if_hwassist = BCE_IF_HWASSIST;
|
|
else
|
|
ifp->if_hwassist = 0;
|
|
}
|
|
|
|
/* Toggle the RX checksum capabilities enable flag. */
|
|
if (mask & IFCAP_RXCSUM) {
|
|
ifp->if_capenable ^= IFCAP_RXCSUM;
|
|
if (IFCAP_RXCSUM & ifp->if_capenable)
|
|
ifp->if_hwassist = BCE_IF_HWASSIST;
|
|
else
|
|
ifp->if_hwassist = 0;
|
|
}
|
|
|
|
/* Toggle the TSO capabilities enable flag. */
|
|
if (bce_tso_enable && (mask & IFCAP_TSO4)) {
|
|
ifp->if_capenable ^= IFCAP_TSO4;
|
|
if (IFCAP_RXCSUM & ifp->if_capenable)
|
|
ifp->if_hwassist = BCE_IF_HWASSIST;
|
|
else
|
|
ifp->if_hwassist = 0;
|
|
}
|
|
|
|
/* Toggle VLAN_MTU capabilities enable flag. */
|
|
if (mask & IFCAP_VLAN_MTU) {
|
|
BCE_PRINTF("%s(%d): Changing VLAN_MTU not supported.\n",
|
|
__FILE__, __LINE__);
|
|
}
|
|
|
|
/* Toggle VLANHWTAG capabilities enabled flag. */
|
|
if (mask & IFCAP_VLAN_HWTAGGING) {
|
|
if (sc->bce_flags & BCE_MFW_ENABLE_FLAG)
|
|
BCE_PRINTF("%s(%d): Cannot change VLAN_HWTAGGING while "
|
|
"management firmware (ASF/IPMI/UMP) is running!\n",
|
|
__FILE__, __LINE__);
|
|
else
|
|
BCE_PRINTF("%s(%d): Changing VLAN_HWTAGGING not supported!\n",
|
|
__FILE__, __LINE__);
|
|
}
|
|
|
|
break;
|
|
default:
|
|
/* We don't know how to handle the IOCTL, pass it on. */
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
DBEXIT(BCE_VERBOSE_MISC);
|
|
return(error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Transmit timeout handler. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_watchdog(struct bce_softc *sc)
|
|
{
|
|
DBENTER(BCE_EXTREME_SEND);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* If the watchdog timer hasn't expired then just exit. */
|
|
if (sc->watchdog_timer == 0 || --sc->watchdog_timer)
|
|
goto bce_watchdog_exit;
|
|
|
|
/* If pause frames are active then don't reset the hardware. */
|
|
/* ToDo: Should we reset the timer here? */
|
|
if (REG_RD(sc, BCE_EMAC_TX_STATUS) & BCE_EMAC_TX_STATUS_XOFFED)
|
|
goto bce_watchdog_exit;
|
|
|
|
BCE_PRINTF("%s(%d): Watchdog timeout occurred, resetting!\n",
|
|
__FILE__, __LINE__);
|
|
|
|
DBRUNMSG(BCE_INFO,
|
|
bce_dump_driver_state(sc);
|
|
bce_dump_status_block(sc);
|
|
bce_dump_stats_block(sc);
|
|
bce_dump_ftqs(sc);
|
|
bce_dump_txp_state(sc, 0);
|
|
bce_dump_rxp_state(sc, 0);
|
|
bce_dump_tpat_state(sc, 0);
|
|
bce_dump_cp_state(sc, 0);
|
|
bce_dump_com_state(sc, 0));
|
|
|
|
DBRUN(bce_breakpoint(sc));
|
|
|
|
sc->bce_ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
|
|
bce_init_locked(sc);
|
|
sc->bce_ifp->if_oerrors++;
|
|
|
|
bce_watchdog_exit:
|
|
DBEXIT(BCE_EXTREME_SEND);
|
|
}
|
|
|
|
|
|
/*
|
|
* Interrupt handler.
|
|
*/
|
|
/****************************************************************************/
|
|
/* Main interrupt entry point. Verifies that the controller generated the */
|
|
/* interrupt and then calls a separate routine for handle the various */
|
|
/* interrupt causes (PHY, TX, RX). */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_intr(void *xsc)
|
|
{
|
|
struct bce_softc *sc;
|
|
struct ifnet *ifp;
|
|
u32 status_attn_bits;
|
|
u16 hw_rx_cons, hw_tx_cons;
|
|
|
|
sc = xsc;
|
|
ifp = sc->bce_ifp;
|
|
|
|
DBENTER(BCE_VERBOSE_SEND | BCE_VERBOSE_RECV | BCE_VERBOSE_INTR);
|
|
DBRUNMSG(BCE_VERBOSE_INTR, bce_dump_status_block(sc));
|
|
|
|
BCE_LOCK(sc);
|
|
|
|
DBRUN(sc->interrupts_generated++);
|
|
|
|
bus_dmamap_sync(sc->status_tag, sc->status_map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
|
|
/*
|
|
* If the hardware status block index
|
|
* matches the last value read by the
|
|
* driver and we haven't asserted our
|
|
* interrupt then there's nothing to do.
|
|
*/
|
|
if ((sc->status_block->status_idx == sc->last_status_idx) &&
|
|
(REG_RD(sc, BCE_PCICFG_MISC_STATUS) & BCE_PCICFG_MISC_STATUS_INTA_VALUE)) {
|
|
DBPRINT(sc, BCE_VERBOSE_INTR, "%s(): Spurious interrupt.\n",
|
|
__FUNCTION__);
|
|
goto bce_intr_exit;
|
|
}
|
|
|
|
/* Ack the interrupt and stop others from occuring. */
|
|
REG_WR(sc, BCE_PCICFG_INT_ACK_CMD,
|
|
BCE_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
|
|
BCE_PCICFG_INT_ACK_CMD_MASK_INT);
|
|
|
|
/* Check if the hardware has finished any work. */
|
|
hw_rx_cons = bce_get_hw_rx_cons(sc);
|
|
hw_tx_cons = bce_get_hw_tx_cons(sc);
|
|
|
|
/* Keep processing data as long as there is work to do. */
|
|
for (;;) {
|
|
|
|
status_attn_bits = sc->status_block->status_attn_bits;
|
|
|
|
DBRUNIF(DB_RANDOMTRUE(bce_debug_unexpected_attention),
|
|
BCE_PRINTF("Simulating unexpected status attention bit set.");
|
|
status_attn_bits = status_attn_bits | STATUS_ATTN_BITS_PARITY_ERROR);
|
|
|
|
/* Was it a link change interrupt? */
|
|
if ((status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) !=
|
|
(sc->status_block->status_attn_bits_ack & STATUS_ATTN_BITS_LINK_STATE)) {
|
|
bce_phy_intr(sc);
|
|
|
|
/* Clear any transient status updates during link state change. */
|
|
REG_WR(sc, BCE_HC_COMMAND,
|
|
sc->hc_command | BCE_HC_COMMAND_COAL_NOW_WO_INT);
|
|
REG_RD(sc, BCE_HC_COMMAND);
|
|
}
|
|
|
|
/* If any other attention is asserted then the chip is toast. */
|
|
if (((status_attn_bits & ~STATUS_ATTN_BITS_LINK_STATE) !=
|
|
(sc->status_block->status_attn_bits_ack &
|
|
~STATUS_ATTN_BITS_LINK_STATE))) {
|
|
|
|
DBRUN(sc->unexpected_attentions++);
|
|
|
|
BCE_PRINTF("%s(%d): Fatal attention detected: 0x%08X\n",
|
|
__FILE__, __LINE__, sc->status_block->status_attn_bits);
|
|
|
|
DBRUNMSG(BCE_FATAL,
|
|
if (bce_debug_unexpected_attention == 0)
|
|
bce_breakpoint(sc));
|
|
|
|
bce_init_locked(sc);
|
|
goto bce_intr_exit;
|
|
}
|
|
|
|
/* Check for any completed RX frames. */
|
|
if (hw_rx_cons != sc->hw_rx_cons)
|
|
bce_rx_intr(sc);
|
|
|
|
/* Check for any completed TX frames. */
|
|
if (hw_tx_cons != sc->hw_tx_cons)
|
|
bce_tx_intr(sc);
|
|
|
|
/* Save the status block index value for use during the next interrupt. */
|
|
sc->last_status_idx = sc->status_block->status_idx;
|
|
|
|
/* Prevent speculative reads from getting ahead of the status block. */
|
|
bus_space_barrier(sc->bce_btag, sc->bce_bhandle, 0, 0,
|
|
BUS_SPACE_BARRIER_READ);
|
|
|
|
/* If there's no work left then exit the interrupt service routine. */
|
|
hw_rx_cons = bce_get_hw_rx_cons(sc);
|
|
hw_tx_cons = bce_get_hw_tx_cons(sc);
|
|
|
|
if ((hw_rx_cons == sc->hw_rx_cons) && (hw_tx_cons == sc->hw_tx_cons))
|
|
break;
|
|
|
|
}
|
|
|
|
bus_dmamap_sync(sc->status_tag, sc->status_map,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Re-enable interrupts. */
|
|
bce_enable_intr(sc, 0);
|
|
|
|
/* Handle any frames that arrived while handling the interrupt. */
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING && !IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
bce_start_locked(ifp);
|
|
|
|
bce_intr_exit:
|
|
BCE_UNLOCK(sc);
|
|
|
|
DBEXIT(BCE_VERBOSE_SEND | BCE_VERBOSE_RECV | BCE_VERBOSE_INTR);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Programs the various packet receive modes (broadcast and multicast). */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_set_rx_mode(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
u32 hashes[NUM_MC_HASH_REGISTERS] = { 0, 0, 0, 0, 0, 0, 0, 0 };
|
|
u32 rx_mode, sort_mode;
|
|
int h, i;
|
|
|
|
DBENTER(BCE_VERBOSE_MISC);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
/* Initialize receive mode default settings. */
|
|
rx_mode = sc->rx_mode & ~(BCE_EMAC_RX_MODE_PROMISCUOUS |
|
|
BCE_EMAC_RX_MODE_KEEP_VLAN_TAG);
|
|
sort_mode = 1 | BCE_RPM_SORT_USER0_BC_EN;
|
|
|
|
/*
|
|
* ASF/IPMI/UMP firmware requires that VLAN tag stripping
|
|
* be enbled.
|
|
*/
|
|
if (!(BCE_IF_CAPABILITIES & IFCAP_VLAN_HWTAGGING) &&
|
|
(!(sc->bce_flags & BCE_MFW_ENABLE_FLAG)))
|
|
rx_mode |= BCE_EMAC_RX_MODE_KEEP_VLAN_TAG;
|
|
|
|
/*
|
|
* Check for promiscuous, all multicast, or selected
|
|
* multicast address filtering.
|
|
*/
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
DBPRINT(sc, BCE_INFO_MISC, "Enabling promiscuous mode.\n");
|
|
|
|
/* Enable promiscuous mode. */
|
|
rx_mode |= BCE_EMAC_RX_MODE_PROMISCUOUS;
|
|
sort_mode |= BCE_RPM_SORT_USER0_PROM_EN;
|
|
} else if (ifp->if_flags & IFF_ALLMULTI) {
|
|
DBPRINT(sc, BCE_INFO_MISC, "Enabling all multicast mode.\n");
|
|
|
|
/* Enable all multicast addresses. */
|
|
for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) {
|
|
REG_WR(sc, BCE_EMAC_MULTICAST_HASH0 + (i * 4), 0xffffffff);
|
|
}
|
|
sort_mode |= BCE_RPM_SORT_USER0_MC_EN;
|
|
} else {
|
|
/* Accept one or more multicast(s). */
|
|
DBPRINT(sc, BCE_INFO_MISC, "Enabling selective multicast mode.\n");
|
|
|
|
IF_ADDR_LOCK(ifp);
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = ether_crc32_le(LLADDR((struct sockaddr_dl *)
|
|
ifma->ifma_addr), ETHER_ADDR_LEN) & 0xFF;
|
|
hashes[(h & 0xE0) >> 5] |= 1 << (h & 0x1F);
|
|
}
|
|
IF_ADDR_UNLOCK(ifp);
|
|
|
|
for (i = 0; i < NUM_MC_HASH_REGISTERS; i++)
|
|
REG_WR(sc, BCE_EMAC_MULTICAST_HASH0 + (i * 4), hashes[i]);
|
|
|
|
sort_mode |= BCE_RPM_SORT_USER0_MC_HSH_EN;
|
|
}
|
|
|
|
/* Only make changes if the recive mode has actually changed. */
|
|
if (rx_mode != sc->rx_mode) {
|
|
DBPRINT(sc, BCE_VERBOSE_MISC, "Enabling new receive mode: 0x%08X\n",
|
|
rx_mode);
|
|
|
|
sc->rx_mode = rx_mode;
|
|
REG_WR(sc, BCE_EMAC_RX_MODE, rx_mode);
|
|
}
|
|
|
|
/* Disable and clear the exisitng sort before enabling a new sort. */
|
|
REG_WR(sc, BCE_RPM_SORT_USER0, 0x0);
|
|
REG_WR(sc, BCE_RPM_SORT_USER0, sort_mode);
|
|
REG_WR(sc, BCE_RPM_SORT_USER0, sort_mode | BCE_RPM_SORT_USER0_ENA);
|
|
|
|
DBEXIT(BCE_VERBOSE_MISC);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Called periodically to updates statistics from the controllers */
|
|
/* statistics block. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_stats_update(struct bce_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct statistics_block *stats;
|
|
|
|
DBENTER(BCE_EXTREME_MISC);
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
stats = (struct statistics_block *) sc->stats_block;
|
|
|
|
/*
|
|
* Certain controllers don't report
|
|
* carrier sense errors correctly.
|
|
* See errata E11_5708CA0_1165.
|
|
*/
|
|
if (!(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5706) &&
|
|
!(BCE_CHIP_ID(sc) == BCE_CHIP_ID_5708_A0))
|
|
ifp->if_oerrors += (u_long) stats->stat_Dot3StatsCarrierSenseErrors;
|
|
|
|
/*
|
|
* Update the sysctl statistics from the
|
|
* hardware statistics.
|
|
*/
|
|
sc->stat_IfHCInOctets =
|
|
((u64) stats->stat_IfHCInOctets_hi << 32) +
|
|
(u64) stats->stat_IfHCInOctets_lo;
|
|
|
|
sc->stat_IfHCInBadOctets =
|
|
((u64) stats->stat_IfHCInBadOctets_hi << 32) +
|
|
(u64) stats->stat_IfHCInBadOctets_lo;
|
|
|
|
sc->stat_IfHCOutOctets =
|
|
((u64) stats->stat_IfHCOutOctets_hi << 32) +
|
|
(u64) stats->stat_IfHCOutOctets_lo;
|
|
|
|
sc->stat_IfHCOutBadOctets =
|
|
((u64) stats->stat_IfHCOutBadOctets_hi << 32) +
|
|
(u64) stats->stat_IfHCOutBadOctets_lo;
|
|
|
|
sc->stat_IfHCInUcastPkts =
|
|
((u64) stats->stat_IfHCInUcastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCInUcastPkts_lo;
|
|
|
|
sc->stat_IfHCInMulticastPkts =
|
|
((u64) stats->stat_IfHCInMulticastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCInMulticastPkts_lo;
|
|
|
|
sc->stat_IfHCInBroadcastPkts =
|
|
((u64) stats->stat_IfHCInBroadcastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCInBroadcastPkts_lo;
|
|
|
|
sc->stat_IfHCOutUcastPkts =
|
|
((u64) stats->stat_IfHCOutUcastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCOutUcastPkts_lo;
|
|
|
|
sc->stat_IfHCOutMulticastPkts =
|
|
((u64) stats->stat_IfHCOutMulticastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCOutMulticastPkts_lo;
|
|
|
|
sc->stat_IfHCOutBroadcastPkts =
|
|
((u64) stats->stat_IfHCOutBroadcastPkts_hi << 32) +
|
|
(u64) stats->stat_IfHCOutBroadcastPkts_lo;
|
|
|
|
sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors =
|
|
stats->stat_emac_tx_stat_dot3statsinternalmactransmiterrors;
|
|
|
|
sc->stat_Dot3StatsCarrierSenseErrors =
|
|
stats->stat_Dot3StatsCarrierSenseErrors;
|
|
|
|
sc->stat_Dot3StatsFCSErrors =
|
|
stats->stat_Dot3StatsFCSErrors;
|
|
|
|
sc->stat_Dot3StatsAlignmentErrors =
|
|
stats->stat_Dot3StatsAlignmentErrors;
|
|
|
|
sc->stat_Dot3StatsSingleCollisionFrames =
|
|
stats->stat_Dot3StatsSingleCollisionFrames;
|
|
|
|
sc->stat_Dot3StatsMultipleCollisionFrames =
|
|
stats->stat_Dot3StatsMultipleCollisionFrames;
|
|
|
|
sc->stat_Dot3StatsDeferredTransmissions =
|
|
stats->stat_Dot3StatsDeferredTransmissions;
|
|
|
|
sc->stat_Dot3StatsExcessiveCollisions =
|
|
stats->stat_Dot3StatsExcessiveCollisions;
|
|
|
|
sc->stat_Dot3StatsLateCollisions =
|
|
stats->stat_Dot3StatsLateCollisions;
|
|
|
|
sc->stat_EtherStatsCollisions =
|
|
stats->stat_EtherStatsCollisions;
|
|
|
|
sc->stat_EtherStatsFragments =
|
|
stats->stat_EtherStatsFragments;
|
|
|
|
sc->stat_EtherStatsJabbers =
|
|
stats->stat_EtherStatsJabbers;
|
|
|
|
sc->stat_EtherStatsUndersizePkts =
|
|
stats->stat_EtherStatsUndersizePkts;
|
|
|
|
sc->stat_EtherStatsOverrsizePkts =
|
|
stats->stat_EtherStatsOverrsizePkts;
|
|
|
|
sc->stat_EtherStatsPktsRx64Octets =
|
|
stats->stat_EtherStatsPktsRx64Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx65Octetsto127Octets =
|
|
stats->stat_EtherStatsPktsRx65Octetsto127Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx128Octetsto255Octets =
|
|
stats->stat_EtherStatsPktsRx128Octetsto255Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx256Octetsto511Octets =
|
|
stats->stat_EtherStatsPktsRx256Octetsto511Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx512Octetsto1023Octets =
|
|
stats->stat_EtherStatsPktsRx512Octetsto1023Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx1024Octetsto1522Octets =
|
|
stats->stat_EtherStatsPktsRx1024Octetsto1522Octets;
|
|
|
|
sc->stat_EtherStatsPktsRx1523Octetsto9022Octets =
|
|
stats->stat_EtherStatsPktsRx1523Octetsto9022Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx64Octets =
|
|
stats->stat_EtherStatsPktsTx64Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx65Octetsto127Octets =
|
|
stats->stat_EtherStatsPktsTx65Octetsto127Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx128Octetsto255Octets =
|
|
stats->stat_EtherStatsPktsTx128Octetsto255Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx256Octetsto511Octets =
|
|
stats->stat_EtherStatsPktsTx256Octetsto511Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx512Octetsto1023Octets =
|
|
stats->stat_EtherStatsPktsTx512Octetsto1023Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx1024Octetsto1522Octets =
|
|
stats->stat_EtherStatsPktsTx1024Octetsto1522Octets;
|
|
|
|
sc->stat_EtherStatsPktsTx1523Octetsto9022Octets =
|
|
stats->stat_EtherStatsPktsTx1523Octetsto9022Octets;
|
|
|
|
sc->stat_XonPauseFramesReceived =
|
|
stats->stat_XonPauseFramesReceived;
|
|
|
|
sc->stat_XoffPauseFramesReceived =
|
|
stats->stat_XoffPauseFramesReceived;
|
|
|
|
sc->stat_OutXonSent =
|
|
stats->stat_OutXonSent;
|
|
|
|
sc->stat_OutXoffSent =
|
|
stats->stat_OutXoffSent;
|
|
|
|
sc->stat_FlowControlDone =
|
|
stats->stat_FlowControlDone;
|
|
|
|
sc->stat_MacControlFramesReceived =
|
|
stats->stat_MacControlFramesReceived;
|
|
|
|
sc->stat_XoffStateEntered =
|
|
stats->stat_XoffStateEntered;
|
|
|
|
sc->stat_IfInFramesL2FilterDiscards =
|
|
stats->stat_IfInFramesL2FilterDiscards;
|
|
|
|
sc->stat_IfInRuleCheckerDiscards =
|
|
stats->stat_IfInRuleCheckerDiscards;
|
|
|
|
sc->stat_IfInFTQDiscards =
|
|
stats->stat_IfInFTQDiscards;
|
|
|
|
sc->stat_IfInMBUFDiscards =
|
|
stats->stat_IfInMBUFDiscards;
|
|
|
|
sc->stat_IfInRuleCheckerP4Hit =
|
|
stats->stat_IfInRuleCheckerP4Hit;
|
|
|
|
sc->stat_CatchupInRuleCheckerDiscards =
|
|
stats->stat_CatchupInRuleCheckerDiscards;
|
|
|
|
sc->stat_CatchupInFTQDiscards =
|
|
stats->stat_CatchupInFTQDiscards;
|
|
|
|
sc->stat_CatchupInMBUFDiscards =
|
|
stats->stat_CatchupInMBUFDiscards;
|
|
|
|
sc->stat_CatchupInRuleCheckerP4Hit =
|
|
stats->stat_CatchupInRuleCheckerP4Hit;
|
|
|
|
sc->com_no_buffers = REG_RD_IND(sc, 0x120084);
|
|
|
|
/*
|
|
* Update the interface statistics from the
|
|
* hardware statistics.
|
|
*/
|
|
ifp->if_collisions =
|
|
(u_long) sc->stat_EtherStatsCollisions;
|
|
|
|
/* ToDo: This method loses soft errors. */
|
|
ifp->if_ierrors =
|
|
(u_long) sc->stat_EtherStatsUndersizePkts +
|
|
(u_long) sc->stat_EtherStatsOverrsizePkts +
|
|
(u_long) sc->stat_IfInMBUFDiscards +
|
|
(u_long) sc->stat_Dot3StatsAlignmentErrors +
|
|
(u_long) sc->stat_Dot3StatsFCSErrors +
|
|
(u_long) sc->stat_IfInFramesL2FilterDiscards +
|
|
(u_long) sc->stat_IfInRuleCheckerDiscards +
|
|
(u_long) sc->stat_IfInFTQDiscards +
|
|
(u_long) sc->com_no_buffers;
|
|
|
|
/* ToDo: This method loses soft errors. */
|
|
ifp->if_oerrors =
|
|
(u_long) sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors +
|
|
(u_long) sc->stat_Dot3StatsExcessiveCollisions +
|
|
(u_long) sc->stat_Dot3StatsLateCollisions;
|
|
|
|
/* ToDo: Add additional statistics. */
|
|
|
|
DBEXIT(BCE_EXTREME_MISC);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Periodic function to notify the bootcode that the driver is still */
|
|
/* present. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_pulse(void *xsc)
|
|
{
|
|
struct bce_softc *sc = xsc;
|
|
u32 msg;
|
|
|
|
DBENTER(BCE_EXTREME_MISC);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* Tell the firmware that the driver is still running. */
|
|
msg = (u32) ++sc->bce_fw_drv_pulse_wr_seq;
|
|
REG_WR_IND(sc, sc->bce_shmem_base + BCE_DRV_PULSE_MB, msg);
|
|
|
|
/* Schedule the next pulse. */
|
|
callout_reset(&sc->bce_pulse_callout, hz, bce_pulse, sc);
|
|
|
|
DBEXIT(BCE_EXTREME_MISC);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Periodic function to perform maintenance tasks. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_tick(void *xsc)
|
|
{
|
|
struct bce_softc *sc = xsc;
|
|
struct mii_data *mii;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = sc->bce_ifp;
|
|
|
|
DBENTER(BCE_EXTREME_MISC);
|
|
|
|
BCE_LOCK_ASSERT(sc);
|
|
|
|
/* Schedule the next tick. */
|
|
callout_reset(&sc->bce_tick_callout, hz, bce_tick, sc);
|
|
|
|
/* Update the statistics from the hardware statistics block. */
|
|
bce_stats_update(sc);
|
|
|
|
/* Top off the receive and page chains. */
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
bce_fill_pg_chain(sc);
|
|
#endif
|
|
bce_fill_rx_chain(sc);
|
|
|
|
/* Check that chip hasn't hung. */
|
|
bce_watchdog(sc);
|
|
|
|
/* If link is up already up then we're done. */
|
|
if (sc->bce_link)
|
|
goto bce_tick_exit;
|
|
|
|
/* Link is down. Check what the PHY's doing. */
|
|
mii = device_get_softc(sc->bce_miibus);
|
|
mii_tick(mii);
|
|
|
|
/* Check if the link has come up. */
|
|
if ((mii->mii_media_status & IFM_ACTIVE) &&
|
|
(IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE)) {
|
|
DBPRINT(sc, BCE_VERBOSE_MISC, "%s(): Link up!\n", __FUNCTION__);
|
|
sc->bce_link++;
|
|
if ((IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_T ||
|
|
IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_SX) &&
|
|
bootverbose)
|
|
BCE_PRINTF("Gigabit link up!\n");
|
|
/* Now that link is up, handle any outstanding TX traffic. */
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
|
|
DBPRINT(sc, BCE_VERBOSE_MISC, "%s(): Found pending TX traffic.\n",
|
|
__FUNCTION__);
|
|
bce_start_locked(ifp);
|
|
}
|
|
}
|
|
|
|
bce_tick_exit:
|
|
DBEXIT(BCE_EXTREME_MISC);
|
|
return;
|
|
}
|
|
|
|
|
|
#ifdef BCE_DEBUG
|
|
/****************************************************************************/
|
|
/* Allows the driver state to be dumped through the sysctl interface. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_driver_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_driver_state(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allows the hardware state to be dumped through the sysctl interface. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_hw_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_hw_state(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Allows the bootcode state to be dumped through the sysctl interface. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_bc_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_bc_state(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow dumping the RX chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_dump_rx_chain(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_rx_chain(sc, 0, TOTAL_RX_BD);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow dumping the TX chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_dump_tx_chain(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_tx_chain(sc, 0, USABLE_TX_BD);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow dumping the page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_dump_pg_chain(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_pg_chain(sc, 0, TOTAL_PG_BD);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
#endif
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow reading arbitrary NVRAM offsets in */
|
|
/* the device. DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_nvram_read(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc = (struct bce_softc *)arg1;
|
|
int error;
|
|
u32 result;
|
|
u32 val[1];
|
|
u8 *data = (u8 *) val;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
if (error || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
bce_nvram_read(sc, result, data, 4);
|
|
BCE_PRINTF("offset 0x%08X = 0x%08X\n", result, bce_be32toh(val[0]));
|
|
|
|
return (error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow reading arbitrary registers in the */
|
|
/* device. DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_reg_read(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc = (struct bce_softc *)arg1;
|
|
int error;
|
|
u32 val, result;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
if (error || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Make sure the register is accessible. */
|
|
if (result < 0x8000) {
|
|
val = REG_RD(sc, result);
|
|
BCE_PRINTF("reg 0x%08X = 0x%08X\n", result, val);
|
|
} else if (result < 0x0280000) {
|
|
val = REG_RD_IND(sc, result);
|
|
BCE_PRINTF("reg 0x%08X = 0x%08X\n", result, val);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow reading arbitrary PHY registers in */
|
|
/* the device. DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_phy_read(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc;
|
|
device_t dev;
|
|
int error, result;
|
|
u16 val;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
if (error || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Make sure the register is accessible. */
|
|
if (result < 0x20) {
|
|
sc = (struct bce_softc *)arg1;
|
|
dev = sc->bce_dev;
|
|
val = bce_miibus_read_reg(dev, sc->bce_phy_addr, result);
|
|
BCE_PRINTF("phy 0x%02X = 0x%04X\n", result, val);
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to allow reading a CID. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_dump_ctx(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct bce_softc *sc;
|
|
int error;
|
|
u16 result;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
if (error || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Make sure the register is accessible. */
|
|
if (result <= TX_CID) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_dump_ctx(sc, result);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Provides a sysctl interface to forcing the driver to dump state and */
|
|
/* enter the debugger. DO NOT ENABLE ON PRODUCTION SYSTEMS! */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static int
|
|
bce_sysctl_breakpoint(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct bce_softc *sc;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
sc = (struct bce_softc *)arg1;
|
|
bce_breakpoint(sc);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Adds any sysctl parameters for tuning or debugging purposes. */
|
|
/* */
|
|
/* Returns: */
|
|
/* 0 for success, positive value for failure. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_add_sysctls(struct bce_softc *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *children;
|
|
|
|
DBENTER(BCE_VERBOSE_MISC);
|
|
|
|
ctx = device_get_sysctl_ctx(sc->bce_dev);
|
|
children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->bce_dev));
|
|
|
|
#ifdef BCE_DEBUG
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"rx_low_watermark",
|
|
CTLFLAG_RD, &sc->rx_low_watermark,
|
|
0, "Lowest level of free rx_bd's");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"rx_empty_count",
|
|
CTLFLAG_RD, &sc->rx_empty_count,
|
|
0, "Number of times the RX chain was empty");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_hi_watermark",
|
|
CTLFLAG_RD, &sc->tx_hi_watermark,
|
|
0, "Highest level of used tx_bd's");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_full_count",
|
|
CTLFLAG_RD, &sc->tx_full_count,
|
|
0, "Number of times the TX chain was full");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"l2fhdr_status_errors",
|
|
CTLFLAG_RD, &sc->l2fhdr_status_errors,
|
|
0, "l2_fhdr status errors");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"unexpected_attentions",
|
|
CTLFLAG_RD, &sc->unexpected_attentions,
|
|
0, "Unexpected attentions");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"lost_status_block_updates",
|
|
CTLFLAG_RD, &sc->lost_status_block_updates,
|
|
0, "Lost status block updates");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"debug_mbuf_sim_alloc_failed",
|
|
CTLFLAG_RD, &sc->debug_mbuf_sim_alloc_failed,
|
|
0, "Simulated mbuf cluster allocation failures");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"requested_tso_frames",
|
|
CTLFLAG_RD, &sc->requested_tso_frames,
|
|
0, "Number of TSO frames received");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"rx_interrupts",
|
|
CTLFLAG_RD, &sc->rx_interrupts,
|
|
0, "Number of RX interrupts");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"tx_interrupts",
|
|
CTLFLAG_RD, &sc->tx_interrupts,
|
|
0, "Number of TX interrupts");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"rx_intr_time",
|
|
CTLFLAG_RD, &sc->rx_intr_time,
|
|
"RX interrupt time");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"tx_intr_time",
|
|
CTLFLAG_RD, &sc->tx_intr_time,
|
|
"TX interrupt time");
|
|
#endif
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"mbuf_alloc_failed",
|
|
CTLFLAG_RD, &sc->mbuf_alloc_failed,
|
|
0, "mbuf cluster allocation failures");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_dma_map_failures",
|
|
CTLFLAG_RD, &sc->tx_dma_map_failures,
|
|
0, "tx dma mapping failures");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHcInOctets",
|
|
CTLFLAG_RD, &sc->stat_IfHCInOctets,
|
|
"Bytes received");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHCInBadOctets",
|
|
CTLFLAG_RD, &sc->stat_IfHCInBadOctets,
|
|
"Bad bytes received");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutOctets",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutOctets,
|
|
"Bytes sent");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutBadOctets",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutBadOctets,
|
|
"Bad bytes sent");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHCInUcastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCInUcastPkts,
|
|
"Unicast packets received");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHCInMulticastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCInMulticastPkts,
|
|
"Multicast packets received");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHCInBroadcastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCInBroadcastPkts,
|
|
"Broadcast packets received");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutUcastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutUcastPkts,
|
|
"Unicast packets sent");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutMulticastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutMulticastPkts,
|
|
"Multicast packets sent");
|
|
|
|
SYSCTL_ADD_ULONG(ctx, children, OID_AUTO,
|
|
"stat_IfHCOutBroadcastPkts",
|
|
CTLFLAG_RD, &sc->stat_IfHCOutBroadcastPkts,
|
|
"Broadcast packets sent");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_emac_tx_stat_dot3statsinternalmactransmiterrors",
|
|
CTLFLAG_RD, &sc->stat_emac_tx_stat_dot3statsinternalmactransmiterrors,
|
|
0, "Internal MAC transmit errors");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsCarrierSenseErrors",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsCarrierSenseErrors,
|
|
0, "Carrier sense errors");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsFCSErrors",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsFCSErrors,
|
|
0, "Frame check sequence errors");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsAlignmentErrors",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsAlignmentErrors,
|
|
0, "Alignment errors");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsSingleCollisionFrames",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsSingleCollisionFrames,
|
|
0, "Single Collision Frames");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsMultipleCollisionFrames",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsMultipleCollisionFrames,
|
|
0, "Multiple Collision Frames");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsDeferredTransmissions",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsDeferredTransmissions,
|
|
0, "Deferred Transmissions");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsExcessiveCollisions",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsExcessiveCollisions,
|
|
0, "Excessive Collisions");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_Dot3StatsLateCollisions",
|
|
CTLFLAG_RD, &sc->stat_Dot3StatsLateCollisions,
|
|
0, "Late Collisions");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsCollisions",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsCollisions,
|
|
0, "Collisions");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsFragments",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsFragments,
|
|
0, "Fragments");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsJabbers",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsJabbers,
|
|
0, "Jabbers");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsUndersizePkts",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsUndersizePkts,
|
|
0, "Undersize packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsOverrsizePkts",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsOverrsizePkts,
|
|
0, "stat_EtherStatsOverrsizePkts");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx64Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx64Octets,
|
|
0, "Bytes received in 64 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx65Octetsto127Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx65Octetsto127Octets,
|
|
0, "Bytes received in 65 to 127 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx128Octetsto255Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx128Octetsto255Octets,
|
|
0, "Bytes received in 128 to 255 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx256Octetsto511Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx256Octetsto511Octets,
|
|
0, "Bytes received in 256 to 511 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx512Octetsto1023Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx512Octetsto1023Octets,
|
|
0, "Bytes received in 512 to 1023 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx1024Octetsto1522Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx1024Octetsto1522Octets,
|
|
0, "Bytes received in 1024 t0 1522 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsRx1523Octetsto9022Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsRx1523Octetsto9022Octets,
|
|
0, "Bytes received in 1523 to 9022 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx64Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx64Octets,
|
|
0, "Bytes sent in 64 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx65Octetsto127Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx65Octetsto127Octets,
|
|
0, "Bytes sent in 65 to 127 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx128Octetsto255Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx128Octetsto255Octets,
|
|
0, "Bytes sent in 128 to 255 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx256Octetsto511Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx256Octetsto511Octets,
|
|
0, "Bytes sent in 256 to 511 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx512Octetsto1023Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx512Octetsto1023Octets,
|
|
0, "Bytes sent in 512 to 1023 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx1024Octetsto1522Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx1024Octetsto1522Octets,
|
|
0, "Bytes sent in 1024 to 1522 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_EtherStatsPktsTx1523Octetsto9022Octets",
|
|
CTLFLAG_RD, &sc->stat_EtherStatsPktsTx1523Octetsto9022Octets,
|
|
0, "Bytes sent in 1523 to 9022 byte packets");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_XonPauseFramesReceived",
|
|
CTLFLAG_RD, &sc->stat_XonPauseFramesReceived,
|
|
0, "XON pause frames receved");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_XoffPauseFramesReceived",
|
|
CTLFLAG_RD, &sc->stat_XoffPauseFramesReceived,
|
|
0, "XOFF pause frames received");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_OutXonSent",
|
|
CTLFLAG_RD, &sc->stat_OutXonSent,
|
|
0, "XON pause frames sent");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_OutXoffSent",
|
|
CTLFLAG_RD, &sc->stat_OutXoffSent,
|
|
0, "XOFF pause frames sent");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_FlowControlDone",
|
|
CTLFLAG_RD, &sc->stat_FlowControlDone,
|
|
0, "Flow control done");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_MacControlFramesReceived",
|
|
CTLFLAG_RD, &sc->stat_MacControlFramesReceived,
|
|
0, "MAC control frames received");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_XoffStateEntered",
|
|
CTLFLAG_RD, &sc->stat_XoffStateEntered,
|
|
0, "XOFF state entered");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInFramesL2FilterDiscards",
|
|
CTLFLAG_RD, &sc->stat_IfInFramesL2FilterDiscards,
|
|
0, "Received L2 packets discarded");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInRuleCheckerDiscards",
|
|
CTLFLAG_RD, &sc->stat_IfInRuleCheckerDiscards,
|
|
0, "Received packets discarded by rule");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInFTQDiscards",
|
|
CTLFLAG_RD, &sc->stat_IfInFTQDiscards,
|
|
0, "Received packet FTQ discards");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInMBUFDiscards",
|
|
CTLFLAG_RD, &sc->stat_IfInMBUFDiscards,
|
|
0, "Received packets discarded due to lack of controller buffer memory");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_IfInRuleCheckerP4Hit",
|
|
CTLFLAG_RD, &sc->stat_IfInRuleCheckerP4Hit,
|
|
0, "Received packets rule checker hits");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_CatchupInRuleCheckerDiscards",
|
|
CTLFLAG_RD, &sc->stat_CatchupInRuleCheckerDiscards,
|
|
0, "Received packets discarded in Catchup path");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_CatchupInFTQDiscards",
|
|
CTLFLAG_RD, &sc->stat_CatchupInFTQDiscards,
|
|
0, "Received packets discarded in FTQ in Catchup path");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_CatchupInMBUFDiscards",
|
|
CTLFLAG_RD, &sc->stat_CatchupInMBUFDiscards,
|
|
0, "Received packets discarded in controller buffer memory in Catchup path");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"stat_CatchupInRuleCheckerP4Hit",
|
|
CTLFLAG_RD, &sc->stat_CatchupInRuleCheckerP4Hit,
|
|
0, "Received packets rule checker hits in Catchup path");
|
|
|
|
SYSCTL_ADD_UINT(ctx, children, OID_AUTO,
|
|
"com_no_buffers",
|
|
CTLFLAG_RD, &sc->com_no_buffers,
|
|
0, "Valid packets received but no RX buffers available");
|
|
|
|
#ifdef BCE_DEBUG
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"driver_state", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_driver_state, "I", "Drive state information");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"hw_state", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_hw_state, "I", "Hardware state information");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"bc_state", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_bc_state, "I", "Bootcode state information");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dump_rx_chain", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_dump_rx_chain, "I", "Dump rx_bd chain");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dump_tx_chain", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_dump_tx_chain, "I", "Dump tx_bd chain");
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dump_pg_chain", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_dump_pg_chain, "I", "Dump page chain");
|
|
#endif
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dump_ctx", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_dump_ctx, "I", "Dump context memory");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"breakpoint", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_breakpoint, "I", "Driver breakpoint");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"reg_read", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_reg_read, "I", "Register read");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"nvram_read", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_nvram_read, "I", "NVRAM read");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"phy_read", CTLTYPE_INT | CTLFLAG_RW,
|
|
(void *)sc, 0,
|
|
bce_sysctl_phy_read, "I", "PHY register read");
|
|
|
|
#endif
|
|
|
|
DBEXIT(BCE_VERBOSE_MISC);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* BCE Debug Routines */
|
|
/****************************************************************************/
|
|
#ifdef BCE_DEBUG
|
|
|
|
/****************************************************************************/
|
|
/* Freezes the controller to allow for a cohesive state dump. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_freeze_controller(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
val = REG_RD(sc, BCE_MISC_COMMAND);
|
|
val |= BCE_MISC_COMMAND_DISABLE_ALL;
|
|
REG_WR(sc, BCE_MISC_COMMAND, val);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Unfreezes the controller after a freeze operation. This may not always */
|
|
/* work and the controller will require a reset! */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_unfreeze_controller(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
val = REG_RD(sc, BCE_MISC_COMMAND);
|
|
val |= BCE_MISC_COMMAND_ENABLE_ALL;
|
|
REG_WR(sc, BCE_MISC_COMMAND, val);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out Ethernet frame information from an mbuf. */
|
|
/* */
|
|
/* Partially decode an Ethernet frame to look at some important headers. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_dump_enet(struct bce_softc *sc, struct mbuf *m)
|
|
{
|
|
struct ether_vlan_header *eh;
|
|
u16 etype;
|
|
int ehlen;
|
|
struct ip *ip;
|
|
struct tcphdr *th;
|
|
struct udphdr *uh;
|
|
struct arphdr *ah;
|
|
|
|
BCE_PRINTF(
|
|
"-----------------------------"
|
|
" Frame Decode "
|
|
"-----------------------------\n");
|
|
|
|
eh = mtod(m, struct ether_vlan_header *);
|
|
|
|
/* Handle VLAN encapsulation if present. */
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
etype = ntohs(eh->evl_proto);
|
|
ehlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
} else {
|
|
etype = ntohs(eh->evl_encap_proto);
|
|
ehlen = ETHER_HDR_LEN;
|
|
}
|
|
|
|
/* ToDo: Add VLAN output. */
|
|
BCE_PRINTF("enet: dest = %6D, src = %6D, type = 0x%04X, hlen = %d\n",
|
|
eh->evl_dhost, ":", eh->evl_shost, ":", etype, ehlen);
|
|
|
|
switch (etype) {
|
|
case ETHERTYPE_IP:
|
|
ip = (struct ip *)(m->m_data + ehlen);
|
|
BCE_PRINTF("--ip: dest = 0x%08X , src = 0x%08X, len = %d bytes, "
|
|
"protocol = 0x%02X, xsum = 0x%04X\n",
|
|
ntohl(ip->ip_dst.s_addr), ntohl(ip->ip_src.s_addr),
|
|
ntohs(ip->ip_len), ip->ip_p, ntohs(ip->ip_sum));
|
|
|
|
switch (ip->ip_p) {
|
|
case IPPROTO_TCP:
|
|
th = (struct tcphdr *)((caddr_t)ip + (ip->ip_hl << 2));
|
|
BCE_PRINTF("-tcp: dest = %d, src = %d, hlen = %d bytes, "
|
|
"flags = 0x%b, csum = 0x%04X\n",
|
|
ntohs(th->th_dport), ntohs(th->th_sport), (th->th_off << 2),
|
|
th->th_flags, "\20\10CWR\07ECE\06URG\05ACK\04PSH\03RST\02SYN\01FIN",
|
|
ntohs(th->th_sum));
|
|
break;
|
|
case IPPROTO_UDP:
|
|
uh = (struct udphdr *)((caddr_t)ip + (ip->ip_hl << 2));
|
|
BCE_PRINTF("-udp: dest = %d, src = %d, len = %d bytes, "
|
|
"csum = 0x%04X\n", ntohs(uh->uh_dport), ntohs(uh->uh_sport),
|
|
ntohs(uh->uh_ulen), ntohs(uh->uh_sum));
|
|
break;
|
|
case IPPROTO_ICMP:
|
|
BCE_PRINTF("icmp:\n");
|
|
break;
|
|
default:
|
|
BCE_PRINTF("----: Other IP protocol.\n");
|
|
}
|
|
break;
|
|
case ETHERTYPE_IPV6:
|
|
BCE_PRINTF("ipv6: No decode supported.\n");
|
|
break;
|
|
case ETHERTYPE_ARP:
|
|
BCE_PRINTF("-arp: ");
|
|
ah = (struct arphdr *) (m->m_data + ehlen);
|
|
switch (ntohs(ah->ar_op)) {
|
|
case ARPOP_REVREQUEST:
|
|
printf("reverse ARP request\n");
|
|
break;
|
|
case ARPOP_REVREPLY:
|
|
printf("reverse ARP reply\n");
|
|
break;
|
|
case ARPOP_REQUEST:
|
|
printf("ARP request\n");
|
|
break;
|
|
case ARPOP_REPLY:
|
|
printf("ARP reply\n");
|
|
break;
|
|
default:
|
|
printf("other ARP operation\n");
|
|
}
|
|
break;
|
|
default:
|
|
BCE_PRINTF("----: Other protocol.\n");
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"-----------------------------"
|
|
"--------------"
|
|
"-----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out information about an mbuf. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_mbuf(struct bce_softc *sc, struct mbuf *m)
|
|
{
|
|
struct mbuf *mp = m;
|
|
|
|
if (m == NULL) {
|
|
BCE_PRINTF("mbuf: null pointer\n");
|
|
return;
|
|
}
|
|
|
|
while (mp) {
|
|
BCE_PRINTF("mbuf: %p, m_len = %d, m_flags = 0x%b, m_data = %p\n",
|
|
mp, mp->m_len, mp->m_flags,
|
|
"\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY",
|
|
mp->m_data);
|
|
|
|
if (mp->m_flags & M_PKTHDR) {
|
|
BCE_PRINTF("- m_pkthdr: len = %d, flags = 0x%b, csum_flags = %b\n",
|
|
mp->m_pkthdr.len, mp->m_flags,
|
|
"\20\12M_BCAST\13M_MCAST\14M_FRAG\15M_FIRSTFRAG"
|
|
"\16M_LASTFRAG\21M_VLANTAG\22M_PROMISC\23M_NOFREE",
|
|
mp->m_pkthdr.csum_flags,
|
|
"\20\1CSUM_IP\2CSUM_TCP\3CSUM_UDP\4CSUM_IP_FRAGS"
|
|
"\5CSUM_FRAGMENT\6CSUM_TSO\11CSUM_IP_CHECKED"
|
|
"\12CSUM_IP_VALID\13CSUM_DATA_VALID\14CSUM_PSEUDO_HDR");
|
|
}
|
|
|
|
if (mp->m_flags & M_EXT) {
|
|
BCE_PRINTF("- m_ext: %p, ext_size = %d, type = ",
|
|
mp->m_ext.ext_buf, mp->m_ext.ext_size);
|
|
switch (mp->m_ext.ext_type) {
|
|
case EXT_CLUSTER: printf("EXT_CLUSTER\n"); break;
|
|
case EXT_SFBUF: printf("EXT_SFBUF\n"); break;
|
|
case EXT_JUMBO9: printf("EXT_JUMBO9\n"); break;
|
|
case EXT_JUMBO16: printf("EXT_JUMBO16\n"); break;
|
|
case EXT_PACKET: printf("EXT_PACKET\n"); break;
|
|
case EXT_MBUF: printf("EXT_MBUF\n"); break;
|
|
case EXT_NET_DRV: printf("EXT_NET_DRV\n"); break;
|
|
case EXT_MOD_TYPE: printf("EXT_MDD_TYPE\n"); break;
|
|
case EXT_DISPOSABLE: printf("EXT_DISPOSABLE\n"); break;
|
|
case EXT_EXTREF: printf("EXT_EXTREF\n"); break;
|
|
default: printf("UNKNOWN\n");
|
|
}
|
|
}
|
|
|
|
mp = mp->m_next;
|
|
}
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the mbufs in the TX mbuf chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_tx_mbuf_chain(struct bce_softc *sc, u16 chain_prod, int count)
|
|
{
|
|
struct mbuf *m;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" tx mbuf data "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < count; i++) {
|
|
m = sc->tx_mbuf_ptr[chain_prod];
|
|
BCE_PRINTF("txmbuf[0x%04X]\n", chain_prod);
|
|
bce_dump_mbuf(sc, m);
|
|
chain_prod = TX_CHAIN_IDX(NEXT_TX_BD(chain_prod));
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the mbufs in the RX mbuf chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_rx_mbuf_chain(struct bce_softc *sc, u16 chain_prod, int count)
|
|
{
|
|
struct mbuf *m;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" rx mbuf data "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < count; i++) {
|
|
m = sc->rx_mbuf_ptr[chain_prod];
|
|
BCE_PRINTF("rxmbuf[0x%04X]\n", chain_prod);
|
|
bce_dump_mbuf(sc, m);
|
|
chain_prod = RX_CHAIN_IDX(NEXT_RX_BD(chain_prod));
|
|
}
|
|
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/****************************************************************************/
|
|
/* Prints out the mbufs in the mbuf page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_pg_mbuf_chain(struct bce_softc *sc, u16 chain_prod, int count)
|
|
{
|
|
struct mbuf *m;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" pg mbuf data "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < count; i++) {
|
|
m = sc->pg_mbuf_ptr[chain_prod];
|
|
BCE_PRINTF("pgmbuf[0x%04X]\n", chain_prod);
|
|
bce_dump_mbuf(sc, m);
|
|
chain_prod = PG_CHAIN_IDX(NEXT_PG_BD(chain_prod));
|
|
}
|
|
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out a tx_bd structure. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_txbd(struct bce_softc *sc, int idx, struct tx_bd *txbd)
|
|
{
|
|
if (idx > MAX_TX_BD)
|
|
/* Index out of range. */
|
|
BCE_PRINTF("tx_bd[0x%04X]: Invalid tx_bd index!\n", idx);
|
|
else if ((idx & USABLE_TX_BD_PER_PAGE) == USABLE_TX_BD_PER_PAGE)
|
|
/* TX Chain page pointer. */
|
|
BCE_PRINTF("tx_bd[0x%04X]: haddr = 0x%08X:%08X, chain page pointer\n",
|
|
idx, txbd->tx_bd_haddr_hi, txbd->tx_bd_haddr_lo);
|
|
else {
|
|
/* Normal tx_bd entry. */
|
|
BCE_PRINTF("tx_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = 0x%08X, "
|
|
"vlan tag= 0x%04X, flags = 0x%04X (", idx,
|
|
txbd->tx_bd_haddr_hi, txbd->tx_bd_haddr_lo,
|
|
txbd->tx_bd_mss_nbytes, txbd->tx_bd_vlan_tag,
|
|
txbd->tx_bd_flags);
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_CONN_FAULT)
|
|
printf(" CONN_FAULT");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_TCP_UDP_CKSUM)
|
|
printf(" TCP_UDP_CKSUM");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_IP_CKSUM)
|
|
printf(" IP_CKSUM");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_VLAN_TAG)
|
|
printf(" VLAN");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_COAL_NOW)
|
|
printf(" COAL_NOW");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_DONT_GEN_CRC)
|
|
printf(" DONT_GEN_CRC");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_START)
|
|
printf(" START");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_END)
|
|
printf(" END");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_SW_LSO)
|
|
printf(" LSO");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_SW_OPTION_WORD)
|
|
printf(" OPTION_WORD");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_SW_FLAGS)
|
|
printf(" FLAGS");
|
|
|
|
if (txbd->tx_bd_flags & TX_BD_FLAGS_SW_SNAP)
|
|
printf(" SNAP");
|
|
|
|
printf(" )\n");
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out a rx_bd structure. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_rxbd(struct bce_softc *sc, int idx, struct rx_bd *rxbd)
|
|
{
|
|
if (idx > MAX_RX_BD)
|
|
/* Index out of range. */
|
|
BCE_PRINTF("rx_bd[0x%04X]: Invalid rx_bd index!\n", idx);
|
|
else if ((idx & USABLE_RX_BD_PER_PAGE) == USABLE_RX_BD_PER_PAGE)
|
|
/* RX Chain page pointer. */
|
|
BCE_PRINTF("rx_bd[0x%04X]: haddr = 0x%08X:%08X, chain page pointer\n",
|
|
idx, rxbd->rx_bd_haddr_hi, rxbd->rx_bd_haddr_lo);
|
|
else
|
|
/* Normal rx_bd entry. */
|
|
BCE_PRINTF("rx_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = 0x%08X, "
|
|
"flags = 0x%08X\n", idx,
|
|
rxbd->rx_bd_haddr_hi, rxbd->rx_bd_haddr_lo,
|
|
rxbd->rx_bd_len, rxbd->rx_bd_flags);
|
|
}
|
|
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/****************************************************************************/
|
|
/* Prints out a rx_bd structure in the page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_pgbd(struct bce_softc *sc, int idx, struct rx_bd *pgbd)
|
|
{
|
|
if (idx > MAX_PG_BD)
|
|
/* Index out of range. */
|
|
BCE_PRINTF("pg_bd[0x%04X]: Invalid pg_bd index!\n", idx);
|
|
else if ((idx & USABLE_PG_BD_PER_PAGE) == USABLE_PG_BD_PER_PAGE)
|
|
/* Page Chain page pointer. */
|
|
BCE_PRINTF("px_bd[0x%04X]: haddr = 0x%08X:%08X, chain page pointer\n",
|
|
idx, pgbd->rx_bd_haddr_hi, pgbd->rx_bd_haddr_lo);
|
|
else
|
|
/* Normal rx_bd entry. */
|
|
BCE_PRINTF("pg_bd[0x%04X]: haddr = 0x%08X:%08X, nbytes = 0x%08X, "
|
|
"flags = 0x%08X\n", idx,
|
|
pgbd->rx_bd_haddr_hi, pgbd->rx_bd_haddr_lo,
|
|
pgbd->rx_bd_len, pgbd->rx_bd_flags);
|
|
}
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out a l2_fhdr structure. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_l2fhdr(struct bce_softc *sc, int idx, struct l2_fhdr *l2fhdr)
|
|
{
|
|
BCE_PRINTF("l2_fhdr[0x%04X]: status = 0x%b, "
|
|
"pkt_len = %d, vlan = 0x%04x, ip_xsum/hdr_len = 0x%04X, "
|
|
"tcp_udp_xsum = 0x%04X\n", idx,
|
|
l2fhdr->l2_fhdr_status, BCE_L2FHDR_PRINTFB,
|
|
l2fhdr->l2_fhdr_pkt_len, l2fhdr->l2_fhdr_vlan_tag,
|
|
l2fhdr->l2_fhdr_ip_xsum, l2fhdr->l2_fhdr_tcp_udp_xsum);
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out context memory info. (Only useful for CID 0 to 16.) */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_ctx(struct bce_softc *sc, u16 cid)
|
|
{
|
|
if (cid <= TX_CID) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" CTX Data "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF(" 0x%04X - (CID) Context ID\n", cid);
|
|
|
|
if (cid == RX_CID) {
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_HOST_BDIDX) host rx "
|
|
"producer index\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_HOST_BDIDX));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_HOST_BSEQ) host byte sequence\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_HOST_BSEQ));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_BSEQ) h/w byte sequence\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_BSEQ));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_BDHADDR_HI) h/w buffer "
|
|
"descriptor address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_BDHADDR_HI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_BDHADDR_LO) h/w buffer "
|
|
"descriptor address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_BDHADDR_LO));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_BDIDX) h/w rx consumer index\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_BDIDX));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_HOST_PG_BDIDX) host page "
|
|
"producer index\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_HOST_PG_BDIDX));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_PG_BUF_SIZE) host rx_bd/page "
|
|
"buffer size\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_PG_BUF_SIZE));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_PG_BDHADDR_HI) h/w page "
|
|
"chain address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_PG_BDHADDR_HI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_PG_BDHADDR_LO) h/w page "
|
|
"chain address\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_PG_BDHADDR_LO));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_RX_NX_PG_BDIDX) h/w page "
|
|
"consumer index\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_RX_NX_PG_BDIDX));
|
|
} else if (cid == TX_CID) {
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TYPE_XI) ctx type\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_TX_TYPE_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_CMD_TX_TYPE_XI) ctx cmd\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_TX_CMD_TYPE_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TBDR_BDHADDR_HI_XI) h/w buffer "
|
|
"descriptor address\n", CTX_RD(sc,
|
|
GET_CID_ADDR(cid), BCE_L2CTX_TX_TBDR_BHADDR_HI_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TBDR_BHADDR_LO_XI) h/w buffer "
|
|
"descriptor address\n", CTX_RD(sc,
|
|
GET_CID_ADDR(cid), BCE_L2CTX_TX_TBDR_BHADDR_LO_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_HOST_BIDX_XI) host producer "
|
|
"index\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_HOST_BIDX_XI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_HOST_BSEQ_XI) host byte "
|
|
"sequence\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_HOST_BSEQ_XI));
|
|
} else {
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TYPE) ctx type\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_TX_TYPE));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_CMD_TYPE) ctx cmd\n",
|
|
CTX_RD(sc, GET_CID_ADDR(cid), BCE_L2CTX_TX_CMD_TYPE));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TBDR_BDHADDR_HI) h/w buffer "
|
|
"descriptor address\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_HI));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_TBDR_BHADDR_LO) h/w buffer "
|
|
"descriptor address\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_TBDR_BHADDR_LO));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_HOST_BIDX) host producer "
|
|
"index\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_HOST_BIDX));
|
|
BCE_PRINTF(" 0x%08X - (L2CTX_TX_HOST_BSEQ) host byte "
|
|
"sequence\n", CTX_RD(sc, GET_CID_ADDR(cid),
|
|
BCE_L2CTX_TX_HOST_BSEQ));
|
|
}
|
|
} else
|
|
BCE_PRINTF(" Unknown CID\n");
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Raw CTX "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0x0; i < 0x300; i += 0x10) {
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n", i,
|
|
CTX_RD(sc, GET_CID_ADDR(cid), i),
|
|
CTX_RD(sc, GET_CID_ADDR(cid), i + 0x4),
|
|
CTX_RD(sc, GET_CID_ADDR(cid), i + 0x8),
|
|
CTX_RD(sc, GET_CID_ADDR(cid), i + 0xc));
|
|
}
|
|
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the FTQ data. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_ftqs(struct bce_softc *sc)
|
|
{
|
|
u32 cmd, ctl, cur_depth, max_depth, valid_cnt, val;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" FTQ Data "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF(" FTQ Command Control Depth_Now Max_Depth Valid_Cnt \n");
|
|
BCE_PRINTF(" ------- ---------- ---------- ---------- ---------- ----------\n");
|
|
|
|
/* Setup the generic statistic counters for the FTQ valid count. */
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PPQ_VALID_CNT << 24) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPCQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUPQ_VALID_CNT);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_0, val);
|
|
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCHQ_VALID_CNT << 24) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMAQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PTQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PMQ_VALID_CNT);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_1, val);
|
|
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPATQ_VALID_CNT << 24) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMAQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXPQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDRQ_VALID_CNT);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_2, val);
|
|
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMQ_VALID_CNT << 24) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMTQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMXQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_TASQ_VALID_CNT);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_3, val);
|
|
|
|
/* Input queue to the Receive Lookup state machine */
|
|
cmd = REG_RD(sc, BCE_RLUP_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RLUP_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_RLUP_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RLUP_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT0);
|
|
BCE_PRINTF(" RLUP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Receive Processor */
|
|
cmd = REG_RD_IND(sc, BCE_RXP_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_RXP_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_RXP_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RXP_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT1);
|
|
BCE_PRINTF(" RXP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Recevie Processor */
|
|
cmd = REG_RD_IND(sc, BCE_RXP_CFTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_RXP_CFTQ_CTL);
|
|
cur_depth = (ctl & BCE_RXP_CFTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RXP_CFTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT2);
|
|
BCE_PRINTF(" RXPC 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Receive Virtual to Physical state machine */
|
|
cmd = REG_RD(sc, BCE_RV2P_PFTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RV2P_PFTQ_CTL);
|
|
cur_depth = (ctl & BCE_RV2P_PFTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RV2P_PFTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT3);
|
|
BCE_PRINTF(" RV2PP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Recevie Virtual to Physical state machine */
|
|
cmd = REG_RD(sc, BCE_RV2P_MFTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RV2P_MFTQ_CTL);
|
|
cur_depth = (ctl & BCE_RV2P_MFTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RV2P_MFTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT4);
|
|
BCE_PRINTF(" RV2PM 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Receive Virtual to Physical state machine */
|
|
cmd = REG_RD(sc, BCE_RV2P_TFTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RV2P_TFTQ_CTL);
|
|
cur_depth = (ctl & BCE_RV2P_TFTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RV2P_TFTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT5);
|
|
BCE_PRINTF(" RV2PT 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Receive DMA state machine */
|
|
cmd = REG_RD(sc, BCE_RDMA_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RDMA_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_RDMA_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_RDMA_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT6);
|
|
BCE_PRINTF(" RDMA 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Scheduler state machine */
|
|
cmd = REG_RD(sc, BCE_TSCH_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_TSCH_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TSCH_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TSCH_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT7);
|
|
BCE_PRINTF(" TSCH 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Buffer Descriptor state machine */
|
|
cmd = REG_RD(sc, BCE_TBDR_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_TBDR_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TBDR_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TBDR_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT8);
|
|
BCE_PRINTF(" TBDR 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Processor */
|
|
cmd = REG_RD_IND(sc, BCE_TXP_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_TXP_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TXP_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TXP_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT9);
|
|
BCE_PRINTF(" TXP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit DMA state machine */
|
|
cmd = REG_RD(sc, BCE_TDMA_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_TDMA_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TDMA_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TDMA_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT10);
|
|
BCE_PRINTF(" TDMA 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Patch-Up Processor */
|
|
cmd = REG_RD_IND(sc, BCE_TPAT_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_TPAT_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TPAT_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TPAT_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT11);
|
|
BCE_PRINTF(" TPAT 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Transmit Assembler state machine */
|
|
cmd = REG_RD_IND(sc, BCE_TAS_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_TAS_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_TAS_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_TAS_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT12);
|
|
BCE_PRINTF(" TAS 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Completion Processor */
|
|
cmd = REG_RD_IND(sc, BCE_COM_COMXQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_COM_COMXQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_COM_COMXQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_COM_COMXQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT13);
|
|
BCE_PRINTF(" COMX 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Completion Processor */
|
|
cmd = REG_RD_IND(sc, BCE_COM_COMTQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_COM_COMTQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_COM_COMTQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_COM_COMTQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT14);
|
|
BCE_PRINTF(" COMT 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Completion Processor */
|
|
cmd = REG_RD_IND(sc, BCE_COM_COMQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_COM_COMQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_COM_COMQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_COM_COMQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT15);
|
|
BCE_PRINTF(" COMX 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Setup the generic statistic counters for the FTQ valid count. */
|
|
val = (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSQ_VALID_CNT << 16) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_CPQ_VALID_CNT << 8) |
|
|
(BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_MGMQ_VALID_CNT);
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716))
|
|
val = val | (BCE_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PCSQ_VALID_CNT_XI << 24);
|
|
REG_WR(sc, BCE_HC_STAT_GEN_SEL_0, val);
|
|
|
|
/* Input queue to the Management Control Processor */
|
|
cmd = REG_RD_IND(sc, BCE_MCP_MCPQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_MCP_MCPQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_MCP_MCPQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_MCP_MCPQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT0);
|
|
BCE_PRINTF(" MCP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Command Processor */
|
|
cmd = REG_RD_IND(sc, BCE_CP_CPQ_FTQ_CMD);
|
|
ctl = REG_RD_IND(sc, BCE_CP_CPQ_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_CP_CPQ_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_CP_CPQ_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT1);
|
|
BCE_PRINTF(" CP 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
/* Input queue to the Completion Scheduler state machine */
|
|
cmd = REG_RD(sc, BCE_CSCH_CH_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_CSCH_CH_FTQ_CTL);
|
|
cur_depth = (ctl & BCE_CSCH_CH_FTQ_CTL_CUR_DEPTH) >> 22;
|
|
max_depth = (ctl & BCE_CSCH_CH_FTQ_CTL_MAX_DEPTH) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT2);
|
|
BCE_PRINTF(" CS 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
|
|
if ((BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5709) ||
|
|
(BCE_CHIP_NUM(sc) == BCE_CHIP_NUM_5716)) {
|
|
/* Input queue to the Receive Virtual to Physical Command Scheduler */
|
|
cmd = REG_RD(sc, BCE_RV2PCSR_FTQ_CMD);
|
|
ctl = REG_RD(sc, BCE_RV2PCSR_FTQ_CTL);
|
|
cur_depth = (ctl & 0xFFC00000) >> 22;
|
|
max_depth = (ctl & 0x003FF000) >> 12;
|
|
valid_cnt = REG_RD(sc, BCE_HC_STAT_GEN_STAT3);
|
|
BCE_PRINTF(" RV2PCSR 0x%08X 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
cmd, ctl, cur_depth, max_depth, valid_cnt);
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the TX chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_tx_chain(struct bce_softc *sc, u16 tx_prod, int count)
|
|
{
|
|
struct tx_bd *txbd;
|
|
|
|
/* First some info about the tx_bd chain structure. */
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" tx_bd chain "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("page size = 0x%08X, tx chain pages = 0x%08X\n",
|
|
(u32) BCM_PAGE_SIZE, (u32) TX_PAGES);
|
|
|
|
BCE_PRINTF("tx_bd per page = 0x%08X, usable tx_bd per page = 0x%08X\n",
|
|
(u32) TOTAL_TX_BD_PER_PAGE, (u32) USABLE_TX_BD_PER_PAGE);
|
|
|
|
BCE_PRINTF("total tx_bd = 0x%08X\n", (u32) TOTAL_TX_BD);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" tx_bd data "
|
|
"----------------------------\n");
|
|
|
|
/* Now print out the tx_bd's themselves. */
|
|
for (int i = 0; i < count; i++) {
|
|
txbd = &sc->tx_bd_chain[TX_PAGE(tx_prod)][TX_IDX(tx_prod)];
|
|
bce_dump_txbd(sc, tx_prod, txbd);
|
|
tx_prod = NEXT_TX_BD(tx_prod);
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the RX chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_rx_chain(struct bce_softc *sc, u16 rx_prod, int count)
|
|
{
|
|
struct rx_bd *rxbd;
|
|
|
|
/* First some info about the rx_bd chain structure. */
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" rx_bd chain "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("page size = 0x%08X, rx chain pages = 0x%08X\n",
|
|
(u32) BCM_PAGE_SIZE, (u32) RX_PAGES);
|
|
|
|
BCE_PRINTF("rx_bd per page = 0x%08X, usable rx_bd per page = 0x%08X\n",
|
|
(u32) TOTAL_RX_BD_PER_PAGE, (u32) USABLE_RX_BD_PER_PAGE);
|
|
|
|
BCE_PRINTF("total rx_bd = 0x%08X\n", (u32) TOTAL_RX_BD);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" rx_bd data "
|
|
"----------------------------\n");
|
|
|
|
/* Now print out the rx_bd's themselves. */
|
|
for (int i = 0; i < count; i++) {
|
|
rxbd = &sc->rx_bd_chain[RX_PAGE(rx_prod)][RX_IDX(rx_prod)];
|
|
bce_dump_rxbd(sc, rx_prod, rxbd);
|
|
rx_prod = RX_CHAIN_IDX(rx_prod + 1);
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
/****************************************************************************/
|
|
/* Prints out the page chain. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_pg_chain(struct bce_softc *sc, u16 pg_prod, int count)
|
|
{
|
|
struct rx_bd *pgbd;
|
|
|
|
/* First some info about the page chain structure. */
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" page chain "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("page size = 0x%08X, pg chain pages = 0x%08X\n",
|
|
(u32) BCM_PAGE_SIZE, (u32) PG_PAGES);
|
|
|
|
BCE_PRINTF("rx_bd per page = 0x%08X, usable rx_bd per page = 0x%08X\n",
|
|
(u32) TOTAL_PG_BD_PER_PAGE, (u32) USABLE_PG_BD_PER_PAGE);
|
|
|
|
BCE_PRINTF("total rx_bd = 0x%08X, max_pg_bd = 0x%08X\n",
|
|
(u32) TOTAL_PG_BD, (u32) MAX_PG_BD);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" page data "
|
|
"----------------------------\n");
|
|
|
|
/* Now print out the rx_bd's themselves. */
|
|
for (int i = 0; i < count; i++) {
|
|
pgbd = &sc->pg_bd_chain[PG_PAGE(pg_prod)][PG_IDX(pg_prod)];
|
|
bce_dump_pgbd(sc, pg_prod, pgbd);
|
|
pg_prod = PG_CHAIN_IDX(pg_prod + 1);
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
#endif
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the status block from host memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_status_block(struct bce_softc *sc)
|
|
{
|
|
struct status_block *sblk;
|
|
|
|
sblk = sc->status_block;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Status Block "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF(" 0x%08X - attn_bits\n",
|
|
sblk->status_attn_bits);
|
|
|
|
BCE_PRINTF(" 0x%08X - attn_bits_ack\n",
|
|
sblk->status_attn_bits_ack);
|
|
|
|
BCE_PRINTF("0x%04X(0x%04X) - rx_cons0\n",
|
|
sblk->status_rx_quick_consumer_index0,
|
|
(u16) RX_CHAIN_IDX(sblk->status_rx_quick_consumer_index0));
|
|
|
|
BCE_PRINTF("0x%04X(0x%04X) - tx_cons0\n",
|
|
sblk->status_tx_quick_consumer_index0,
|
|
(u16) TX_CHAIN_IDX(sblk->status_tx_quick_consumer_index0));
|
|
|
|
BCE_PRINTF(" 0x%04X - status_idx\n", sblk->status_idx);
|
|
|
|
/* Theses indices are not used for normal L2 drivers. */
|
|
if (sblk->status_rx_quick_consumer_index1)
|
|
BCE_PRINTF("0x%04X(0x%04X) - rx_cons1\n",
|
|
sblk->status_rx_quick_consumer_index1,
|
|
(u16) RX_CHAIN_IDX(sblk->status_rx_quick_consumer_index1));
|
|
|
|
if (sblk->status_tx_quick_consumer_index1)
|
|
BCE_PRINTF("0x%04X(0x%04X) - tx_cons1\n",
|
|
sblk->status_tx_quick_consumer_index1,
|
|
(u16) TX_CHAIN_IDX(sblk->status_tx_quick_consumer_index1));
|
|
|
|
if (sblk->status_rx_quick_consumer_index2)
|
|
BCE_PRINTF("0x%04X(0x%04X)- rx_cons2\n",
|
|
sblk->status_rx_quick_consumer_index2,
|
|
(u16) RX_CHAIN_IDX(sblk->status_rx_quick_consumer_index2));
|
|
|
|
if (sblk->status_tx_quick_consumer_index2)
|
|
BCE_PRINTF("0x%04X(0x%04X) - tx_cons2\n",
|
|
sblk->status_tx_quick_consumer_index2,
|
|
(u16) TX_CHAIN_IDX(sblk->status_tx_quick_consumer_index2));
|
|
|
|
if (sblk->status_rx_quick_consumer_index3)
|
|
BCE_PRINTF("0x%04X(0x%04X) - rx_cons3\n",
|
|
sblk->status_rx_quick_consumer_index3,
|
|
(u16) RX_CHAIN_IDX(sblk->status_rx_quick_consumer_index3));
|
|
|
|
if (sblk->status_tx_quick_consumer_index3)
|
|
BCE_PRINTF("0x%04X(0x%04X) - tx_cons3\n",
|
|
sblk->status_tx_quick_consumer_index3,
|
|
(u16) TX_CHAIN_IDX(sblk->status_tx_quick_consumer_index3));
|
|
|
|
if (sblk->status_rx_quick_consumer_index4 ||
|
|
sblk->status_rx_quick_consumer_index5)
|
|
BCE_PRINTF("rx_cons4 = 0x%08X, rx_cons5 = 0x%08X\n",
|
|
sblk->status_rx_quick_consumer_index4,
|
|
sblk->status_rx_quick_consumer_index5);
|
|
|
|
if (sblk->status_rx_quick_consumer_index6 ||
|
|
sblk->status_rx_quick_consumer_index7)
|
|
BCE_PRINTF("rx_cons6 = 0x%08X, rx_cons7 = 0x%08X\n",
|
|
sblk->status_rx_quick_consumer_index6,
|
|
sblk->status_rx_quick_consumer_index7);
|
|
|
|
if (sblk->status_rx_quick_consumer_index8 ||
|
|
sblk->status_rx_quick_consumer_index9)
|
|
BCE_PRINTF("rx_cons8 = 0x%08X, rx_cons9 = 0x%08X\n",
|
|
sblk->status_rx_quick_consumer_index8,
|
|
sblk->status_rx_quick_consumer_index9);
|
|
|
|
if (sblk->status_rx_quick_consumer_index10 ||
|
|
sblk->status_rx_quick_consumer_index11)
|
|
BCE_PRINTF("rx_cons10 = 0x%08X, rx_cons11 = 0x%08X\n",
|
|
sblk->status_rx_quick_consumer_index10,
|
|
sblk->status_rx_quick_consumer_index11);
|
|
|
|
if (sblk->status_rx_quick_consumer_index12 ||
|
|
sblk->status_rx_quick_consumer_index13)
|
|
BCE_PRINTF("rx_cons12 = 0x%08X, rx_cons13 = 0x%08X\n",
|
|
sblk->status_rx_quick_consumer_index12,
|
|
sblk->status_rx_quick_consumer_index13);
|
|
|
|
if (sblk->status_rx_quick_consumer_index14 ||
|
|
sblk->status_rx_quick_consumer_index15)
|
|
BCE_PRINTF("rx_cons14 = 0x%08X, rx_cons15 = 0x%08X\n",
|
|
sblk->status_rx_quick_consumer_index14,
|
|
sblk->status_rx_quick_consumer_index15);
|
|
|
|
if (sblk->status_completion_producer_index ||
|
|
sblk->status_cmd_consumer_index)
|
|
BCE_PRINTF("com_prod = 0x%08X, cmd_cons = 0x%08X\n",
|
|
sblk->status_completion_producer_index,
|
|
sblk->status_cmd_consumer_index);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the statistics block from host memory. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_stats_block(struct bce_softc *sc)
|
|
{
|
|
struct statistics_block *sblk;
|
|
|
|
sblk = sc->stats_block;
|
|
|
|
BCE_PRINTF(
|
|
"---------------"
|
|
" Stats Block (All Stats Not Shown Are 0) "
|
|
"---------------\n");
|
|
|
|
if (sblk->stat_IfHCInOctets_hi
|
|
|| sblk->stat_IfHCInOctets_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcInOctets\n",
|
|
sblk->stat_IfHCInOctets_hi,
|
|
sblk->stat_IfHCInOctets_lo);
|
|
|
|
if (sblk->stat_IfHCInBadOctets_hi
|
|
|| sblk->stat_IfHCInBadOctets_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcInBadOctets\n",
|
|
sblk->stat_IfHCInBadOctets_hi,
|
|
sblk->stat_IfHCInBadOctets_lo);
|
|
|
|
if (sblk->stat_IfHCOutOctets_hi
|
|
|| sblk->stat_IfHCOutOctets_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcOutOctets\n",
|
|
sblk->stat_IfHCOutOctets_hi,
|
|
sblk->stat_IfHCOutOctets_lo);
|
|
|
|
if (sblk->stat_IfHCOutBadOctets_hi
|
|
|| sblk->stat_IfHCOutBadOctets_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcOutBadOctets\n",
|
|
sblk->stat_IfHCOutBadOctets_hi,
|
|
sblk->stat_IfHCOutBadOctets_lo);
|
|
|
|
if (sblk->stat_IfHCInUcastPkts_hi
|
|
|| sblk->stat_IfHCInUcastPkts_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcInUcastPkts\n",
|
|
sblk->stat_IfHCInUcastPkts_hi,
|
|
sblk->stat_IfHCInUcastPkts_lo);
|
|
|
|
if (sblk->stat_IfHCInBroadcastPkts_hi
|
|
|| sblk->stat_IfHCInBroadcastPkts_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcInBroadcastPkts\n",
|
|
sblk->stat_IfHCInBroadcastPkts_hi,
|
|
sblk->stat_IfHCInBroadcastPkts_lo);
|
|
|
|
if (sblk->stat_IfHCInMulticastPkts_hi
|
|
|| sblk->stat_IfHCInMulticastPkts_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcInMulticastPkts\n",
|
|
sblk->stat_IfHCInMulticastPkts_hi,
|
|
sblk->stat_IfHCInMulticastPkts_lo);
|
|
|
|
if (sblk->stat_IfHCOutUcastPkts_hi
|
|
|| sblk->stat_IfHCOutUcastPkts_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcOutUcastPkts\n",
|
|
sblk->stat_IfHCOutUcastPkts_hi,
|
|
sblk->stat_IfHCOutUcastPkts_lo);
|
|
|
|
if (sblk->stat_IfHCOutBroadcastPkts_hi
|
|
|| sblk->stat_IfHCOutBroadcastPkts_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcOutBroadcastPkts\n",
|
|
sblk->stat_IfHCOutBroadcastPkts_hi,
|
|
sblk->stat_IfHCOutBroadcastPkts_lo);
|
|
|
|
if (sblk->stat_IfHCOutMulticastPkts_hi
|
|
|| sblk->stat_IfHCOutMulticastPkts_lo)
|
|
BCE_PRINTF("0x%08X:%08X : "
|
|
"IfHcOutMulticastPkts\n",
|
|
sblk->stat_IfHCOutMulticastPkts_hi,
|
|
sblk->stat_IfHCOutMulticastPkts_lo);
|
|
|
|
if (sblk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors)
|
|
BCE_PRINTF(" 0x%08X : "
|
|
"emac_tx_stat_dot3statsinternalmactransmiterrors\n",
|
|
sblk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors);
|
|
|
|
if (sblk->stat_Dot3StatsCarrierSenseErrors)
|
|
BCE_PRINTF(" 0x%08X : Dot3StatsCarrierSenseErrors\n",
|
|
sblk->stat_Dot3StatsCarrierSenseErrors);
|
|
|
|
if (sblk->stat_Dot3StatsFCSErrors)
|
|
BCE_PRINTF(" 0x%08X : Dot3StatsFCSErrors\n",
|
|
sblk->stat_Dot3StatsFCSErrors);
|
|
|
|
if (sblk->stat_Dot3StatsAlignmentErrors)
|
|
BCE_PRINTF(" 0x%08X : Dot3StatsAlignmentErrors\n",
|
|
sblk->stat_Dot3StatsAlignmentErrors);
|
|
|
|
if (sblk->stat_Dot3StatsSingleCollisionFrames)
|
|
BCE_PRINTF(" 0x%08X : Dot3StatsSingleCollisionFrames\n",
|
|
sblk->stat_Dot3StatsSingleCollisionFrames);
|
|
|
|
if (sblk->stat_Dot3StatsMultipleCollisionFrames)
|
|
BCE_PRINTF(" 0x%08X : Dot3StatsMultipleCollisionFrames\n",
|
|
sblk->stat_Dot3StatsMultipleCollisionFrames);
|
|
|
|
if (sblk->stat_Dot3StatsDeferredTransmissions)
|
|
BCE_PRINTF(" 0x%08X : Dot3StatsDeferredTransmissions\n",
|
|
sblk->stat_Dot3StatsDeferredTransmissions);
|
|
|
|
if (sblk->stat_Dot3StatsExcessiveCollisions)
|
|
BCE_PRINTF(" 0x%08X : Dot3StatsExcessiveCollisions\n",
|
|
sblk->stat_Dot3StatsExcessiveCollisions);
|
|
|
|
if (sblk->stat_Dot3StatsLateCollisions)
|
|
BCE_PRINTF(" 0x%08X : Dot3StatsLateCollisions\n",
|
|
sblk->stat_Dot3StatsLateCollisions);
|
|
|
|
if (sblk->stat_EtherStatsCollisions)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsCollisions\n",
|
|
sblk->stat_EtherStatsCollisions);
|
|
|
|
if (sblk->stat_EtherStatsFragments)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsFragments\n",
|
|
sblk->stat_EtherStatsFragments);
|
|
|
|
if (sblk->stat_EtherStatsJabbers)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsJabbers\n",
|
|
sblk->stat_EtherStatsJabbers);
|
|
|
|
if (sblk->stat_EtherStatsUndersizePkts)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsUndersizePkts\n",
|
|
sblk->stat_EtherStatsUndersizePkts);
|
|
|
|
if (sblk->stat_EtherStatsOverrsizePkts)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsOverrsizePkts\n",
|
|
sblk->stat_EtherStatsOverrsizePkts);
|
|
|
|
if (sblk->stat_EtherStatsPktsRx64Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsRx64Octets\n",
|
|
sblk->stat_EtherStatsPktsRx64Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsRx65Octetsto127Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsRx65Octetsto127Octets\n",
|
|
sblk->stat_EtherStatsPktsRx65Octetsto127Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsRx128Octetsto255Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsRx128Octetsto255Octets\n",
|
|
sblk->stat_EtherStatsPktsRx128Octetsto255Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsRx256Octetsto511Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsRx256Octetsto511Octets\n",
|
|
sblk->stat_EtherStatsPktsRx256Octetsto511Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsRx512Octetsto1023Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsRx512Octetsto1023Octets\n",
|
|
sblk->stat_EtherStatsPktsRx512Octetsto1023Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsRx1024Octetsto1522Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsRx1024Octetsto1522Octets\n",
|
|
sblk->stat_EtherStatsPktsRx1024Octetsto1522Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsRx1523Octetsto9022Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsRx1523Octetsto9022Octets\n",
|
|
sblk->stat_EtherStatsPktsRx1523Octetsto9022Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsTx64Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsTx64Octets\n",
|
|
sblk->stat_EtherStatsPktsTx64Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsTx65Octetsto127Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsTx65Octetsto127Octets\n",
|
|
sblk->stat_EtherStatsPktsTx65Octetsto127Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsTx128Octetsto255Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsTx128Octetsto255Octets\n",
|
|
sblk->stat_EtherStatsPktsTx128Octetsto255Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsTx256Octetsto511Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsTx256Octetsto511Octets\n",
|
|
sblk->stat_EtherStatsPktsTx256Octetsto511Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsTx512Octetsto1023Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsTx512Octetsto1023Octets\n",
|
|
sblk->stat_EtherStatsPktsTx512Octetsto1023Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsTx1024Octetsto1522Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsTx1024Octetsto1522Octets\n",
|
|
sblk->stat_EtherStatsPktsTx1024Octetsto1522Octets);
|
|
|
|
if (sblk->stat_EtherStatsPktsTx1523Octetsto9022Octets)
|
|
BCE_PRINTF(" 0x%08X : EtherStatsPktsTx1523Octetsto9022Octets\n",
|
|
sblk->stat_EtherStatsPktsTx1523Octetsto9022Octets);
|
|
|
|
if (sblk->stat_XonPauseFramesReceived)
|
|
BCE_PRINTF(" 0x%08X : XonPauseFramesReceived\n",
|
|
sblk->stat_XonPauseFramesReceived);
|
|
|
|
if (sblk->stat_XoffPauseFramesReceived)
|
|
BCE_PRINTF(" 0x%08X : XoffPauseFramesReceived\n",
|
|
sblk->stat_XoffPauseFramesReceived);
|
|
|
|
if (sblk->stat_OutXonSent)
|
|
BCE_PRINTF(" 0x%08X : OutXonSent\n",
|
|
sblk->stat_OutXonSent);
|
|
|
|
if (sblk->stat_OutXoffSent)
|
|
BCE_PRINTF(" 0x%08X : OutXoffSent\n",
|
|
sblk->stat_OutXoffSent);
|
|
|
|
if (sblk->stat_FlowControlDone)
|
|
BCE_PRINTF(" 0x%08X : FlowControlDone\n",
|
|
sblk->stat_FlowControlDone);
|
|
|
|
if (sblk->stat_MacControlFramesReceived)
|
|
BCE_PRINTF(" 0x%08X : MacControlFramesReceived\n",
|
|
sblk->stat_MacControlFramesReceived);
|
|
|
|
if (sblk->stat_XoffStateEntered)
|
|
BCE_PRINTF(" 0x%08X : XoffStateEntered\n",
|
|
sblk->stat_XoffStateEntered);
|
|
|
|
if (sblk->stat_IfInFramesL2FilterDiscards)
|
|
BCE_PRINTF(" 0x%08X : IfInFramesL2FilterDiscards\n",
|
|
sblk->stat_IfInFramesL2FilterDiscards);
|
|
|
|
if (sblk->stat_IfInRuleCheckerDiscards)
|
|
BCE_PRINTF(" 0x%08X : IfInRuleCheckerDiscards\n",
|
|
sblk->stat_IfInRuleCheckerDiscards);
|
|
|
|
if (sblk->stat_IfInFTQDiscards)
|
|
BCE_PRINTF(" 0x%08X : IfInFTQDiscards\n",
|
|
sblk->stat_IfInFTQDiscards);
|
|
|
|
if (sblk->stat_IfInMBUFDiscards)
|
|
BCE_PRINTF(" 0x%08X : IfInMBUFDiscards\n",
|
|
sblk->stat_IfInMBUFDiscards);
|
|
|
|
if (sblk->stat_IfInRuleCheckerP4Hit)
|
|
BCE_PRINTF(" 0x%08X : IfInRuleCheckerP4Hit\n",
|
|
sblk->stat_IfInRuleCheckerP4Hit);
|
|
|
|
if (sblk->stat_CatchupInRuleCheckerDiscards)
|
|
BCE_PRINTF(" 0x%08X : CatchupInRuleCheckerDiscards\n",
|
|
sblk->stat_CatchupInRuleCheckerDiscards);
|
|
|
|
if (sblk->stat_CatchupInFTQDiscards)
|
|
BCE_PRINTF(" 0x%08X : CatchupInFTQDiscards\n",
|
|
sblk->stat_CatchupInFTQDiscards);
|
|
|
|
if (sblk->stat_CatchupInMBUFDiscards)
|
|
BCE_PRINTF(" 0x%08X : CatchupInMBUFDiscards\n",
|
|
sblk->stat_CatchupInMBUFDiscards);
|
|
|
|
if (sblk->stat_CatchupInRuleCheckerP4Hit)
|
|
BCE_PRINTF(" 0x%08X : CatchupInRuleCheckerP4Hit\n",
|
|
sblk->stat_CatchupInRuleCheckerP4Hit);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out a summary of the driver state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_driver_state(struct bce_softc *sc)
|
|
{
|
|
u32 val_hi, val_lo;
|
|
|
|
BCE_PRINTF(
|
|
"-----------------------------"
|
|
" Driver State "
|
|
"-----------------------------\n");
|
|
|
|
val_hi = BCE_ADDR_HI(sc);
|
|
val_lo = BCE_ADDR_LO(sc);
|
|
BCE_PRINTF("0x%08X:%08X - (sc) driver softc structure virtual address\n",
|
|
val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->bce_vhandle);
|
|
val_lo = BCE_ADDR_LO(sc->bce_vhandle);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->bce_vhandle) PCI BAR virtual address\n",
|
|
val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->status_block);
|
|
val_lo = BCE_ADDR_LO(sc->status_block);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->status_block) status block virtual address\n",
|
|
val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->stats_block);
|
|
val_lo = BCE_ADDR_LO(sc->stats_block);
|
|
BCE_PRINTF("0x%08X:%08X - (sc->stats_block) statistics block virtual address\n",
|
|
val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->tx_bd_chain);
|
|
val_lo = BCE_ADDR_LO(sc->tx_bd_chain);
|
|
BCE_PRINTF(
|
|
"0x%08X:%08X - (sc->tx_bd_chain) tx_bd chain virtual adddress\n",
|
|
val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->rx_bd_chain);
|
|
val_lo = BCE_ADDR_LO(sc->rx_bd_chain);
|
|
BCE_PRINTF(
|
|
"0x%08X:%08X - (sc->rx_bd_chain) rx_bd chain virtual address\n",
|
|
val_hi, val_lo);
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
val_hi = BCE_ADDR_HI(sc->pg_bd_chain);
|
|
val_lo = BCE_ADDR_LO(sc->pg_bd_chain);
|
|
BCE_PRINTF(
|
|
"0x%08X:%08X - (sc->pg_bd_chain) page chain virtual address\n",
|
|
val_hi, val_lo);
|
|
#endif
|
|
|
|
val_hi = BCE_ADDR_HI(sc->tx_mbuf_ptr);
|
|
val_lo = BCE_ADDR_LO(sc->tx_mbuf_ptr);
|
|
BCE_PRINTF(
|
|
"0x%08X:%08X - (sc->tx_mbuf_ptr) tx mbuf chain virtual address\n",
|
|
val_hi, val_lo);
|
|
|
|
val_hi = BCE_ADDR_HI(sc->rx_mbuf_ptr);
|
|
val_lo = BCE_ADDR_LO(sc->rx_mbuf_ptr);
|
|
BCE_PRINTF(
|
|
"0x%08X:%08X - (sc->rx_mbuf_ptr) rx mbuf chain virtual address\n",
|
|
val_hi, val_lo);
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
val_hi = BCE_ADDR_HI(sc->pg_mbuf_ptr);
|
|
val_lo = BCE_ADDR_LO(sc->pg_mbuf_ptr);
|
|
BCE_PRINTF(
|
|
"0x%08X:%08X - (sc->pg_mbuf_ptr) page mbuf chain virtual address\n",
|
|
val_hi, val_lo);
|
|
#endif
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->interrupts_generated) h/w intrs\n",
|
|
sc->interrupts_generated);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->rx_interrupts) rx interrupts handled\n",
|
|
sc->rx_interrupts);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->tx_interrupts) tx interrupts handled\n",
|
|
sc->tx_interrupts);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->last_status_idx) status block index\n",
|
|
sc->last_status_idx);
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->tx_prod) tx producer index\n",
|
|
sc->tx_prod, (u16) TX_CHAIN_IDX(sc->tx_prod));
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->tx_cons) tx consumer index\n",
|
|
sc->tx_cons, (u16) TX_CHAIN_IDX(sc->tx_cons));
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->tx_prod_bseq) tx producer bseq index\n",
|
|
sc->tx_prod_bseq);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->debug_tx_mbuf_alloc) tx mbufs allocated\n",
|
|
sc->debug_tx_mbuf_alloc);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->used_tx_bd) used tx_bd's\n",
|
|
sc->used_tx_bd);
|
|
|
|
BCE_PRINTF("0x%08X/%08X - (sc->tx_hi_watermark) tx hi watermark\n",
|
|
sc->tx_hi_watermark, sc->max_tx_bd);
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->rx_prod) rx producer index\n",
|
|
sc->rx_prod, (u16) RX_CHAIN_IDX(sc->rx_prod));
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->rx_cons) rx consumer index\n",
|
|
sc->rx_cons, (u16) RX_CHAIN_IDX(sc->rx_cons));
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->rx_prod_bseq) rx producer bseq index\n",
|
|
sc->rx_prod_bseq);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->debug_rx_mbuf_alloc) rx mbufs allocated\n",
|
|
sc->debug_rx_mbuf_alloc);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->free_rx_bd) free rx_bd's\n",
|
|
sc->free_rx_bd);
|
|
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->pg_prod) page producer index\n",
|
|
sc->pg_prod, (u16) PG_CHAIN_IDX(sc->pg_prod));
|
|
|
|
BCE_PRINTF(" 0x%04X(0x%04X) - (sc->pg_cons) page consumer index\n",
|
|
sc->pg_cons, (u16) PG_CHAIN_IDX(sc->pg_cons));
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->debug_pg_mbuf_alloc) page mbufs allocated\n",
|
|
sc->debug_pg_mbuf_alloc);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->free_pg_bd) free page rx_bd's\n",
|
|
sc->free_pg_bd);
|
|
|
|
BCE_PRINTF("0x%08X/%08X - (sc->pg_low_watermark) page low watermark\n",
|
|
sc->pg_low_watermark, sc->max_pg_bd);
|
|
#endif
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->mbuf_alloc_failed) "
|
|
"mbuf alloc failures\n",
|
|
sc->mbuf_alloc_failed);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->debug_mbuf_sim_alloc_failed) "
|
|
"simulated mbuf alloc failures\n",
|
|
sc->debug_mbuf_sim_alloc_failed);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->bce_flags) bce mac flags\n",
|
|
sc->bce_flags);
|
|
|
|
BCE_PRINTF(" 0x%08X - (sc->bce_phy_flags) bce phy flags\n",
|
|
sc->bce_phy_flags);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the hardware state through a summary of important register, */
|
|
/* followed by a complete register dump. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_hw_state(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Hardware State "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("0x%08X - bootcode version\n", sc->bce_fw_ver);
|
|
|
|
val = REG_RD(sc, BCE_MISC_ENABLE_STATUS_BITS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) misc_enable_status_bits\n",
|
|
val, BCE_MISC_ENABLE_STATUS_BITS);
|
|
|
|
val = REG_RD(sc, BCE_DMA_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) dma_status\n", val, BCE_DMA_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_CTX_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) ctx_status\n", val, BCE_CTX_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_EMAC_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) emac_status\n", val, BCE_EMAC_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_RPM_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rpm_status\n", val, BCE_RPM_STATUS);
|
|
|
|
val = REG_RD(sc, 0x2004);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rlup_status\n", val, 0x2004);
|
|
|
|
val = REG_RD(sc, BCE_RV2P_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rv2p_status\n", val, BCE_RV2P_STATUS);
|
|
|
|
val = REG_RD(sc, 0x2c04);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rdma_status\n", val, 0x2c04);
|
|
|
|
val = REG_RD(sc, BCE_TBDR_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tbdr_status\n", val, BCE_TBDR_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_TDMA_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tdma_status\n", val, BCE_TDMA_STATUS);
|
|
|
|
val = REG_RD(sc, BCE_HC_STATUS);
|
|
BCE_PRINTF("0x%08X - (0x%06X) hc_status\n", val, BCE_HC_STATUS);
|
|
|
|
val = REG_RD_IND(sc, BCE_TXP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) txp_cpu_state\n", val, BCE_TXP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TPAT_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tpat_cpu_state\n", val, BCE_TPAT_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_RXP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rxp_cpu_state\n", val, BCE_RXP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_COM_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) com_cpu_state\n", val, BCE_COM_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_MCP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) mcp_cpu_state\n", val, BCE_MCP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_CP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) cp_cpu_state\n", val, BCE_CP_CPU_STATE);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0x400; i < 0x8000; i += 0x10) {
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, REG_RD(sc, i), REG_RD(sc, i + 0x4),
|
|
REG_RD(sc, i + 0x8), REG_RD(sc, i + 0xC));
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the mailbox queue registers. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_mq_regs(struct bce_softc *sc)
|
|
{
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" MQ Regs "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0x3c00; i < 0x4000; i += 0x10) {
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, REG_RD(sc, i), REG_RD(sc, i + 0x4),
|
|
REG_RD(sc, i + 0x8), REG_RD(sc, i + 0xC));
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the bootcode state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_bc_state(struct bce_softc *sc)
|
|
{
|
|
u32 val;
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Bootcode State "
|
|
"----------------------------\n");
|
|
|
|
BCE_PRINTF("0x%08X - bootcode version\n", sc->bce_fw_ver);
|
|
|
|
val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_BC_RESET_TYPE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) reset_type\n",
|
|
val, BCE_BC_RESET_TYPE);
|
|
|
|
val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_BC_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) state\n",
|
|
val, BCE_BC_STATE);
|
|
|
|
val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_BC_CONDITION);
|
|
BCE_PRINTF("0x%08X - (0x%06X) condition\n",
|
|
val, BCE_BC_CONDITION);
|
|
|
|
val = REG_RD_IND(sc, sc->bce_shmem_base + BCE_BC_STATE_DEBUG_CMD);
|
|
BCE_PRINTF("0x%08X - (0x%06X) debug_cmd\n",
|
|
val, BCE_BC_STATE_DEBUG_CMD);
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the TXP processor state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_txp_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[3];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" TXP State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_TXP_SCRATCH + 0x10 + i * 4)));
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_TXP_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) txp_cpu_mode\n", val, BCE_TXP_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TXP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) txp_cpu_state\n", val, BCE_TXP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TXP_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) txp_cpu_event_mask\n", val,
|
|
BCE_TXP_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_TXP_CPU_MODE; i < 0x68000; i += 0x10) {
|
|
/* Skip the big blank spaces */
|
|
if (i < 0x454000 && i > 0x5ffff)
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, REG_RD_IND(sc, i), REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8), REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the RXP processor state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_rxp_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[3];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" RXP State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_RXP_SCRATCH + 0x10 + i * 4)));
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_RXP_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rxp_cpu_mode\n", val, BCE_RXP_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_RXP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rxp_cpu_state\n", val, BCE_RXP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_RXP_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) rxp_cpu_event_mask\n", val,
|
|
BCE_RXP_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_RXP_CPU_MODE; i < 0xe8fff; i += 0x10) {
|
|
/* Skip the big blank sapces */
|
|
if (i < 0xc5400 && i > 0xdffff)
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, REG_RD_IND(sc, i), REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8), REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the TPAT processor state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_tpat_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[3];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" TPAT State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_TPAT_SCRATCH + 0x410 + i * 4)));
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_TPAT_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tpat_cpu_mode\n", val, BCE_TPAT_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TPAT_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tpat_cpu_state\n", val, BCE_TPAT_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_TPAT_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) tpat_cpu_event_mask\n", val,
|
|
BCE_TPAT_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_TPAT_CPU_MODE; i < 0xa3fff; i += 0x10) {
|
|
/* Skip the big blank spaces */
|
|
if (i < 0x854000 && i > 0x9ffff)
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, REG_RD_IND(sc, i), REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8), REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the Command Procesor (CP) state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_cp_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[3];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" CP State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_CP_SCRATCH + 0x10 + i * 4)));
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_CP_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) cp_cpu_mode\n", val, BCE_CP_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_CP_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) cp_cpu_state\n", val, BCE_CP_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_CP_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) cp_cpu_event_mask\n", val,
|
|
BCE_CP_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_CP_CPU_MODE; i < 0x1aa000; i += 0x10) {
|
|
/* Skip the big blank spaces */
|
|
if (i < 0x185400 && i > 0x19ffff)
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, REG_RD_IND(sc, i), REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8), REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the Completion Procesor (COM) state. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static __attribute__ ((noinline)) void
|
|
bce_dump_com_state(struct bce_softc *sc, int regs)
|
|
{
|
|
u32 val;
|
|
u32 fw_version[3];
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" COM State "
|
|
"----------------------------\n");
|
|
|
|
for (int i = 0; i < 3; i++)
|
|
fw_version[i] = htonl(REG_RD_IND(sc,
|
|
(BCE_COM_SCRATCH + 0x10 + i * 4)));
|
|
BCE_PRINTF("Firmware version - %s\n", (char *) fw_version);
|
|
|
|
val = REG_RD_IND(sc, BCE_COM_CPU_MODE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) com_cpu_mode\n", val, BCE_COM_CPU_MODE);
|
|
|
|
val = REG_RD_IND(sc, BCE_COM_CPU_STATE);
|
|
BCE_PRINTF("0x%08X - (0x%06X) com_cpu_state\n", val, BCE_COM_CPU_STATE);
|
|
|
|
val = REG_RD_IND(sc, BCE_COM_CPU_EVENT_MASK);
|
|
BCE_PRINTF("0x%08X - (0x%06X) com_cpu_event_mask\n", val,
|
|
BCE_COM_CPU_EVENT_MASK);
|
|
|
|
if (regs) {
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
" Register Dump "
|
|
"----------------------------\n");
|
|
|
|
for (int i = BCE_COM_CPU_MODE; i < 0x1053e8; i += 0x10) {
|
|
BCE_PRINTF("0x%04X: 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
i, REG_RD_IND(sc, i), REG_RD_IND(sc, i + 0x4),
|
|
REG_RD_IND(sc, i + 0x8), REG_RD_IND(sc, i + 0xC));
|
|
}
|
|
}
|
|
|
|
BCE_PRINTF(
|
|
"----------------------------"
|
|
"----------------"
|
|
"----------------------------\n");
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* Prints out the driver state and then enters the debugger. */
|
|
/* */
|
|
/* Returns: */
|
|
/* Nothing. */
|
|
/****************************************************************************/
|
|
static void
|
|
bce_breakpoint(struct bce_softc *sc)
|
|
{
|
|
|
|
/*
|
|
* Unreachable code to silence compiler warnings
|
|
* about unused functions.
|
|
*/
|
|
if (0) {
|
|
bce_freeze_controller(sc);
|
|
bce_unfreeze_controller(sc);
|
|
bce_dump_enet(sc, NULL);
|
|
bce_dump_txbd(sc, 0, NULL);
|
|
bce_dump_rxbd(sc, 0, NULL);
|
|
bce_dump_tx_mbuf_chain(sc, 0, USABLE_TX_BD);
|
|
bce_dump_rx_mbuf_chain(sc, 0, USABLE_RX_BD);
|
|
bce_dump_l2fhdr(sc, 0, NULL);
|
|
bce_dump_ctx(sc, RX_CID);
|
|
bce_dump_ftqs(sc);
|
|
bce_dump_tx_chain(sc, 0, USABLE_TX_BD);
|
|
bce_dump_rx_chain(sc, 0, USABLE_RX_BD);
|
|
bce_dump_status_block(sc);
|
|
bce_dump_stats_block(sc);
|
|
bce_dump_driver_state(sc);
|
|
bce_dump_hw_state(sc);
|
|
bce_dump_bc_state(sc);
|
|
bce_dump_txp_state(sc, 0);
|
|
bce_dump_rxp_state(sc, 0);
|
|
bce_dump_tpat_state(sc, 0);
|
|
bce_dump_cp_state(sc, 0);
|
|
bce_dump_com_state(sc, 0);
|
|
#ifdef BCE_USE_SPLIT_HEADER
|
|
bce_dump_pgbd(sc, 0, NULL);
|
|
bce_dump_pg_mbuf_chain(sc, 0, USABLE_PG_BD);
|
|
bce_dump_pg_chain(sc, 0, USABLE_PG_BD);
|
|
#endif
|
|
}
|
|
|
|
bce_dump_status_block(sc);
|
|
bce_dump_driver_state(sc);
|
|
|
|
/* Call the debugger. */
|
|
breakpoint();
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|