d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6fe4e0a915
freebsd-dev/sys/dev/ray/if_ray.c
Duncan Barclay a07736d0f6 Take advantage of the fixes to the pcic code that allows multiple 
active memory maps. This removes the need to change the memory
map from common to attribute every time a packet is sent/received.

This increases performance and decreases cpu load (ping times on
slow machines improve by about 1.5ms).

Move out the old common memory/attrbiute memory hack functions to a
new header file to tidy up the main code. I want to keep them available
for a while.
2001-01-17 17:55:00 +00:00

3568 lines
97 KiB
C
Raw Blame History

/*
* Copyright (C) 2000
* Dr. Duncan McLennan Barclay, dmlb@ragnet.demon.co.uk.
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY DUNCAN BARCLAY AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL DUNCAN BARCLAY OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*
*/
/* $NetBSD: if_ray.c,v 1.12 2000/02/07 09:36:27 augustss Exp $ */
/*
* Copyright (c) 2000 Christian E. Hopps
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Card configuration
* ==================
*
* This card is unusual in that it uses both common and attribute
* memory whilst working. It should use common memory and an IO port.
*
* The bus resource allocations need to work around the brain deadness
* of pccardd (where it reads the CIS for common memory, sets it all
* up and then throws it all away assuming the card is an ed
* driver...). Note that this could be dangerous (because it doesn't
* interact with pccardd) if you use other memory mapped cards in the
* same pccard slot as currently old mappings are not cleaned up very well
* by the bus_release_resource methods or pccardd.
*
* There is no support for running this driver on 4.0.
*
* Ad-hoc and infra-structure modes
* ================================
*
* At present only the ad-hoc mode is tested.
*
* I have received an AP from Raylink and will be working on
* infrastructure mode.
*
* The Linux driver also seems to have the capability to act as an AP.
* I wonder what facilities the "AP" can provide within a driver? We can
* probably use the BRIDGE code to form an ESS but I don't think
* power saving etc. is easy.
*
*
* Packet framing/encapsulation
* ================================
*
* Currently we only support the Webgear encapsulation
* 802.11 header <net/if_ieee80211.h>struct ieee80211_frame
* 802.3 header <net/ethernet.h>struct ether_header
* 802.2 LLC header
* 802.2 SNAP header
*
* We should support whatever packet types the following drivers have
* if_wi.c FreeBSD, RFC1042
* if_ray.c NetBSD Webgear, RFC1042
* rayctl.c Linux Webgear, RFC1042
* also whatever we can divine from the NDC Access points and Kanda's boxes.
*
* Most drivers appear to have a RFC1042 framing. The incoming packet is
* 802.11 header <net/if_ieee80211.h>struct ieee80211_frame
* 802.2 LLC header
* 802.2 SNAP header
*
* This is translated to
* 802.3 header <net/ethernet.h>struct ether_header
* 802.2 LLC header
* 802.2 SNAP header
*
* Linux seems to look at the SNAP org_code and do some framings
* for IPX and APPLEARP on that. This just may be how Linux does IPX
* and NETATALK. Need to see how FreeBSD does these.
*
* Translation should be selected via if_media stuff or link types.
*
*
* Authentication
* ==============
*
* 802.11 provides two authentication mechanisms. The first is a very
* simple host based mechanism (like xhost) called Open System and the
* second is a more complex challenge/response called Shared Key built
* ontop of WEP.
*
* This driver only supports Open System and does not implement any
* host based control lists. In otherwords authentication is always
* granted to hosts wanting to authenticate with this station. This is
* the only sensible behaviour as the Open System mechanism uses MAC
* addresses to identify hosts. Send me patches if you need it!
*/
/*
* ***watchdog to catch screwed up removals?
* ***error handling of RAY_COM_RUNQ
* ***error handling of ECF command completions
* ***can't seem to create a n/w that Win95 wants to see.
* ***need decent association code
* write up driver structure in comments above
* UPDATE_PARAMS seems to return via an interrupt - maybe the timeout
* is needed for wrong values?
* havenet needs checking again
* proper setting of mib_hop_seq_len with country code for v4 firmware
* best done with raycontrol?
* more translations
* might be able to autodetect them
* spinning in ray_com_ecf
* countrycode setting is broken I think
* userupdate should trap and do via startjoin etc.
* fragmentation when rx level drops?
*
* infra mode stuff
* proper handling of the basic rate set - see the manual
* all ray_sj, ray_assoc sequencues need a "nicer" solution as we
* remember association and authentication
* need to consider WEP
* acting as ap - should be able to get working from the manual
* need to finish RAY_ECMD_REJOIN_DONE
*
* ray_nw_param
* promisc in here too? - done
* should be able to update the parameters before we download to the
* device. This means we must attach a desired struct to the
* runq entry and maybe have another big case statement to
* move these desired into current when not running.
* init must then use the current settings (pre-loaded
* in attach now!) and pass to download. But we can't access
* current nw params outside of the runq - ahhh
* differeniate between parameters set in attach and init
* sc_station_addr in here too (for changing mac address)
* move desired into the command structure?
* take downloaded MIB from a complete nw_param?
* longer term need to attach a desired nw params to the runq entry
*
*
* RAY_COM_RUNQ errors
*
* if sleeping in ccs_alloc with eintr/erestart/enxio/enodev
* erestart try again from the top
* XXX do not malloc more comqs
* XXX ccs allocation hard
* eintr clean up and return
* enxio clean up and return - done in macro
*
* if sleeping in runq_arr itself with eintr/erestart/enxio/enodev
* erestart try again from the top
* XXX do not malloc more comqs
* XXX ccs allocation hard
* XXX reinsert comqs at head of list
* eintr clean up and return
* enxio clean up and return - done in macro
*/
#define XXX 0
#define XXX_ACTING_AP 0
#define XXX_INFRA 0
#define RAY_DEBUG ( \
/* RAY_DBG_SUBR | */ \
/* RAY_DBG_BOOTPARAM | */ \
/* RAY_DBG_STARTJOIN | */ \
/* RAY_DBG_CCS | */ \
/* RAY_DBG_IOCTL | */ \
/* RAY_DBG_MBUF | */ \
/* RAY_DBG_RX | */ \
/* RAY_DBG_CM | */ \
/* RAY_DBG_COM | */ \
/* RAY_DBG_STOP | */ \
/* RAY_DBG_CTL | */ \
/* RAY_DBG_MGT | */ \
/* RAY_DBG_TX | */ \
/* RAY_DBG_DCOM | */ \
0 \
)
/*
* XXX build options - move to LINT
*/
#define RAY_CM_RID 2 /* pccardd abuses windows 0 and 1 */
#define RAY_AM_RID 3 /* pccardd abuses windows 0 and 1 */
#define RAY_NEED_CM_REMAPPING 0 /* Needed until pccard maps more than one memory area */
#define RAY_NEED_AM_REMAPPING 0 /* Needed until pccard maps more than one memory area */
#define RAY_COM_TIMEOUT (hz/2) /* Timeout for CCS commands */
#define RAY_TX_TIMEOUT (hz/2) /* Timeout for rescheduling TX */
/*
* XXX build options - move to LINT
*/
#ifndef RAY_DEBUG
#define RAY_DEBUG 0x0000
#endif /* RAY_DEBUG */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <net/bpf.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <machine/limits.h>
#include <dev/pccard/pccardvar.h>
#include "card_if.h"
#include <net/if_ieee80211.h>
#include <dev/ray/if_rayreg.h>
#include <dev/ray/if_raymib.h>
#include <dev/ray/if_raydbg.h>
#include <dev/ray/if_rayvar.h>
#include <dev/ray/if_ray_oldcard.h>
/*
* Prototyping
*/
static int ray_attach (device_t);
static int ray_ccs_alloc (struct ray_softc *sc, size_t *ccsp, char *wmesg);
static void ray_ccs_fill (struct ray_softc *sc, size_t ccs, u_int cmd);
static void ray_ccs_free (struct ray_softc *sc, size_t ccs);
static int ray_ccs_tx (struct ray_softc *sc, size_t *ccsp, size_t *bufpp);
static void ray_com_ecf (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_com_ecf_done (struct ray_softc *sc);
static void ray_com_ecf_timo (void *xsc);
static struct ray_comq_entry *
ray_com_init (struct ray_comq_entry *com, ray_comqfn_t function, int flags, char *mesg);
static struct ray_comq_entry *
ray_com_malloc (ray_comqfn_t function, int flags, char *mesg);
static void ray_com_runq (struct ray_softc *sc);
static int ray_com_runq_add (struct ray_softc *sc, struct ray_comq_entry *com[], int ncom, char *wmesg);
static void ray_com_runq_done (struct ray_softc *sc);
static int ray_detach (device_t);
static void ray_init (void *xsc);
static int ray_init_user (struct ray_softc *sc);
static void ray_init_assoc (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_init_assoc_done (struct ray_softc *sc, size_t ccs);
static void ray_init_download (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_init_download_done (struct ray_softc *sc, size_t ccs);
static void ray_init_download_v4 (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_init_download_v5 (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_init_mcast (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_init_sj (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_init_sj_done (struct ray_softc *sc, size_t ccs);
static void ray_intr (void *xsc);
static void ray_intr_ccs (struct ray_softc *sc, u_int8_t cmd, size_t ccs);
static void ray_intr_rcs (struct ray_softc *sc, u_int8_t cmd, size_t ccs);
static void ray_intr_updt_errcntrs (struct ray_softc *sc);
static int ray_ioctl (struct ifnet *ifp, u_long command, caddr_t data);
static void ray_mcast (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_mcast_done (struct ray_softc *sc, size_t ccs);
static int ray_mcast_user (struct ray_softc *sc);
static int ray_probe (device_t);
static void ray_promisc (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_repparams (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_repparams_done (struct ray_softc *sc, size_t ccs);
static int ray_repparams_user (struct ray_softc *sc, struct ray_param_req *pr);
static int ray_repstats_user (struct ray_softc *sc, struct ray_stats_req *sr);
static int ray_res_alloc_am (struct ray_softc *sc);
static int ray_res_alloc_cm (struct ray_softc *sc);
static int ray_res_alloc_irq (struct ray_softc *sc);
static void ray_res_release (struct ray_softc *sc);
static void ray_rx (struct ray_softc *sc, size_t rcs);
static void ray_rx_ctl (struct ray_softc *sc, struct mbuf *m0);
static void ray_rx_data (struct ray_softc *sc, struct mbuf *m0, u_int8_t siglev, u_int8_t antenna);
static void ray_rx_mgt (struct ray_softc *sc, struct mbuf *m0);
static void ray_rx_mgt_auth (struct ray_softc *sc, struct mbuf *m0);
static void ray_rx_update_cache (struct ray_softc *sc, u_int8_t *src, u_int8_t siglev, u_int8_t antenna);
static void ray_stop (struct ray_softc *sc, struct ray_comq_entry *com);
static int ray_stop_user (struct ray_softc *sc);
static void ray_tx (struct ifnet *ifp);
static void ray_tx_done (struct ray_softc *sc, size_t ccs);
static void ray_tx_timo (void *xsc);
static int ray_tx_send (struct ray_softc *sc, size_t ccs, int pktlen, u_int8_t *dst);
static size_t ray_tx_wrhdr (struct ray_softc *sc, size_t bufp, u_int8_t type, u_int8_t fc1, u_int8_t *addr1, u_int8_t *addr2, u_int8_t *addr3);
static void ray_upparams (struct ray_softc *sc, struct ray_comq_entry *com);
static void ray_upparams_done (struct ray_softc *sc, size_t ccs);
static int ray_upparams_user (struct ray_softc *sc, struct ray_param_req *pr);
static void ray_watchdog (struct ifnet *ifp);
static u_int8_t ray_tx_best_antenna (struct ray_softc *sc, u_int8_t *dst);
#if RAY_DEBUG & RAY_DBG_COM
static void ray_com_ecf_check (struct ray_softc *sc, size_t ccs, char *mesg);
#endif /* RAY_DEBUG & RAY_DBG_COM */
#if RAY_DEBUG & RAY_DBG_MBUF
static void ray_dump_mbuf (struct ray_softc *sc, struct mbuf *m, char *s);
#endif /* RAY_DEBUG & RAY_DBG_MBUF */
/*
* PC-Card (PCMCIA) driver definition
*/
static device_method_t ray_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ray_probe),
DEVMETHOD(device_attach, ray_attach),
DEVMETHOD(device_detach, ray_detach),
{ 0, 0 }
};
static driver_t ray_driver = {
"ray",
ray_methods,
sizeof(struct ray_softc)
};
static devclass_t ray_devclass;
DRIVER_MODULE(ray, pccard, ray_driver, ray_devclass, 0, 0);
/*
* Probe for the card by checking its startup results.
*
* Fixup any bugs/quirks for different firmware.
*/
static int
ray_probe(device_t dev)
{
struct ray_softc *sc = device_get_softc(dev);
struct ray_ecf_startup_v5 *ep = &sc->sc_ecf_startup;
int error;
sc->dev = dev;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
/*
* Read startup results from the card.
*/
error = ray_res_alloc_cm(sc);
if (error)
return (error);
RAY_MAP_CM(sc);
SRAM_READ_REGION(sc, RAY_ECF_TO_HOST_BASE, ep,
sizeof(sc->sc_ecf_startup));
ray_res_release(sc);
/*
* Check the card is okay and work out what version we are using.
*/
if (ep->e_status != RAY_ECFS_CARD_OK) {
RAY_PRINTF(sc, "card failed self test 0x%b",
ep->e_status, RAY_ECFS_PRINTFB);
return (ENXIO);
}
if (sc->sc_version != RAY_ECFS_BUILD_4 &&
sc->sc_version != RAY_ECFS_BUILD_5) {
RAY_PRINTF(sc, "unsupported firmware version 0x%0x",
ep->e_fw_build_string);
return (ENXIO);
}
RAY_DPRINTF(sc, RAY_DBG_BOOTPARAM, "found a card");
sc->gone = 0;
/*
* Fixup tib size to be correct - on build 4 it is garbage
*/
if (sc->sc_version == RAY_ECFS_BUILD_4 && sc->sc_tibsize == 0x55)
sc->sc_tibsize = sizeof(struct ray_tx_tib);
return (0);
}
/*
* Attach the card into the kernel
*/
static int
ray_attach(device_t dev)
{
struct ray_softc *sc = device_get_softc(dev);
struct ray_ecf_startup_v5 *ep = &sc->sc_ecf_startup;
struct ifnet *ifp = &sc->arpcom.ac_if;
size_t ccs;
int i, error;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
if ((sc == NULL) || (sc->gone))
return (ENXIO);
/*
* Grab the resources I need
*/
error = ray_res_alloc_cm(sc);
if (error)
return (error);
error = ray_res_alloc_am(sc);
if (error) {
ray_res_release(sc);
return (error);
}
error = ray_res_alloc_irq(sc);
if (error) {
ray_res_release(sc);
return (error);
}
/*
* Reset any pending interrupts
*/
RAY_HCS_CLEAR_INTR(sc);
/*
* Set the parameters that will survive stop/init and
* reset a few things on the card.
*
* Do not update these in ray_init_download's parameter setup
*
* XXX see the ray_init_download section for stuff to move
*/
RAY_MAP_CM(sc);
bzero(&sc->sc_d, sizeof(struct ray_nw_param));
bzero(&sc->sc_c, sizeof(struct ray_nw_param));
/* Clear statistics counters */
sc->sc_rxoverflow = 0;
sc->sc_rxcksum = 0;
sc->sc_rxhcksum = 0;
sc->sc_rxnoise = 0;
/* Clear signal and antenna cache */
bzero(sc->sc_siglevs, sizeof(sc->sc_siglevs));
/* Set all ccs to be free */
bzero(sc->sc_ccsinuse, sizeof(sc->sc_ccsinuse));
ccs = RAY_CCS_ADDRESS(0);
for (i = 0; i < RAY_CCS_LAST; ccs += RAY_CCS_SIZE, i++)
RAY_CCS_FREE(sc, ccs);
/*
* Initialise the network interface structure
*/
bcopy((char *)&ep->e_station_addr,
(char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
ifp->if_softc = sc;
ifp->if_name = "ray";
ifp->if_unit = device_get_unit(dev);
ifp->if_timer = 0;
ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST);
ifp->if_hdrlen = sizeof(struct ieee80211_frame) +
sizeof(struct ether_header);
ifp->if_baudrate = 1000000; /* Is this baud or bps ;-) */
ifp->if_output = ether_output;
ifp->if_start = ray_tx;
ifp->if_ioctl = ray_ioctl;
ifp->if_watchdog = ray_watchdog;
ifp->if_init = ray_init;
ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
ether_ifattach(ifp, ETHER_BPF_SUPPORTED);
/*
* Initialise the timers and driver
*/
callout_handle_init(&sc->com_timerh);
callout_handle_init(&sc->tx_timerh);
TAILQ_INIT(&sc->sc_comq);
/*
* Print out some useful information
*/
if (bootverbose || (RAY_DEBUG & RAY_DBG_BOOTPARAM)) {
RAY_PRINTF(sc, "start up results");
if (sc->sc_version == RAY_ECFS_BUILD_4)
printf(". Firmware version 4\n");
else
printf(". Firmware version 5\n");
printf(". Status 0x%b\n", ep->e_status, RAY_ECFS_PRINTFB);
printf(". Ether address %6D\n", ep->e_station_addr, ":");
if (sc->sc_version == RAY_ECFS_BUILD_4) {
printf(". Program checksum %0x\n", ep->e_resv0);
printf(". CIS checksum %0x\n", ep->e_rates[0]);
} else {
printf(". (reserved word) %0x\n", ep->e_resv0);
printf(". Supported rates %8D\n", ep->e_rates, ":");
}
printf(". Japan call sign %12D\n", ep->e_japan_callsign, ":");
if (sc->sc_version == RAY_ECFS_BUILD_5) {
printf(". Program checksum %0x\n", ep->e_prg_cksum);
printf(". CIS checksum %0x\n", ep->e_cis_cksum);
printf(". Firmware version %0x\n",
ep->e_fw_build_string);
printf(". Firmware revision %0x\n", ep->e_fw_build);
printf(". (reserved word) %0x\n", ep->e_fw_resv);
printf(". ASIC version %0x\n", ep->e_asic_version);
printf(". TIB size %0x\n", ep->e_tibsize);
}
}
return (0);
}
/*
* Detach the card
*
* This is usually called when the card is ejected, but
* can be caused by a modunload of a controller driver.
* The idea is to reset the driver's view of the device
* and ensure that any driver entry points such as
* read and write do not hang.
*/
static int
ray_detach(device_t dev)
{
struct ray_softc *sc = device_get_softc(dev);
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ray_comq_entry *com;
int s;
s = splimp();
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STOP, "");
if ((sc == NULL) || (sc->gone))
return (0);
/*
* Mark as not running and detach the interface.
*
* N.B. if_detach can trigger ioctls so we do it first and
* then clean the runq.
*/
sc->gone = 1;
sc->sc_havenet = 0;
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
ether_ifdetach(ifp, ETHER_BPF_SUPPORTED);
/*
* Stop the runq and wake up anyone sleeping for us.
*/
untimeout(ray_com_ecf_timo, sc, sc->com_timerh);
untimeout(ray_tx_timo, sc, sc->tx_timerh);
com = TAILQ_FIRST(&sc->sc_comq);
for (com = TAILQ_FIRST(&sc->sc_comq); com != NULL;
com = TAILQ_NEXT(com, c_chain)) {
com->c_flags |= RAY_COM_FDETACHED;
com->c_retval = 0;
RAY_DPRINTF(sc, RAY_DBG_STOP, "looking at com %p %b",
com, com->c_flags, RAY_COM_FLAGS_PRINTFB);
if (com->c_flags & RAY_COM_FWOK) {
RAY_DPRINTF(sc, RAY_DBG_STOP, "waking com %p", com);
wakeup(com->c_wakeup);
}
}
/*
* Release resources
*/
ray_res_release(sc);
RAY_DPRINTF(sc, RAY_DBG_STOP, "unloading complete");
splx(s);
return (0);
}
/*
* Network ioctl request.
*/
static int
ray_ioctl(register struct ifnet *ifp, u_long command, caddr_t data)
{
struct ray_softc *sc = ifp->if_softc;
struct ray_param_req pr;
struct ray_stats_req sr;
struct ifreq *ifr = (struct ifreq *)data;
int s, error, error2;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_IOCTL, "");
if ((sc == NULL) || (sc->gone))
return (ENXIO);
error = error2 = 0;
s = splimp();
switch (command) {
case SIOCGIFADDR:
case SIOCSIFMTU:
case SIOCSIFADDR:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFADDR/SIFMTU");
error = ether_ioctl(ifp, command, data);
/* XXX SIFADDR used to fall through to SIOCSIFFLAGS */
break;
case SIOCSIFFLAGS:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "SIFFLAGS 0x%0x", ifp->if_flags);
/*
* If the interface is marked up we call ray_init_user.
* This will deal with mcast and promisc flags as well as
* initialising the hardware if it needs it.
*/
if (ifp->if_flags & IFF_UP)
error = ray_init_user(sc);
else
error = ray_stop_user(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "ADDMULTI/DELMULTI");
error = ray_mcast_user(sc);
break;
case SIOCSRAYPARAM:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "SRAYPARAM");
if ((error = copyin(ifr->ifr_data, &pr, sizeof(pr))))
break;
error = ray_upparams_user(sc, &pr);
error2 = copyout(&pr, ifr->ifr_data, sizeof(pr));
error = error2 ? error2 : error;
break;
case SIOCGRAYPARAM:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GRAYPARAM");
if ((error = copyin(ifr->ifr_data, &pr, sizeof(pr))))
break;
error = ray_repparams_user(sc, &pr);
error2 = copyout(&pr, ifr->ifr_data, sizeof(pr));
error = error2 ? error2 : error;
break;
case SIOCGRAYSTATS:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GRAYSTATS");
error = ray_repstats_user(sc, &sr);
error2 = copyout(&sr, ifr->ifr_data, sizeof(sr));
error = error2 ? error2 : error;
break;
case SIOCGRAYSIGLEV:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GRAYSIGLEV");
error = copyout(sc->sc_siglevs, ifr->ifr_data,
sizeof(sc->sc_siglevs));
break;
case SIOCGIFFLAGS:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFFLAGS");
error = EINVAL;
break;
case SIOCGIFMETRIC:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFMETRIC");
error = EINVAL;
break;
case SIOCGIFMTU:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFMTU");
error = EINVAL;
break;
case SIOCGIFPHYS:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFPYHS");
error = EINVAL;
break;
case SIOCSIFMEDIA:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "SIFMEDIA");
error = EINVAL;
break;
case SIOCGIFMEDIA:
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "GIFMEDIA");
error = EINVAL;
break;
default:
error = EINVAL;
}
splx(s);
return (error);
}
/*
* Ethernet layer entry to ray_init - discard errors
*/
static void
ray_init(void *xsc)
{
struct ray_softc *sc = (struct ray_softc *)xsc;
ray_init_user(sc);
}
/*
* User land entry to network initialisation and changes in interface flags.
*
* We do a very little work here, just creating runq entries to
* processes the actions needed to cope with interface flags. We do it
* this way in case there are runq entries outstanding from earlier
* ioctls that modify the interface flags.
*
* Returns values are either 0 for success, a varity of resource allocation
* failures or errors in the command sent to the card.
*
* Note, IFF_RUNNING is eventually set by init_sj_done or init_assoc_done
*/
static int
ray_init_user(struct ray_softc *sc)
{
struct ray_comq_entry *com[5];
int error, ncom;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
/*
* Create the following runq entries to bring the card up.
*
* init_download - download the network to the card
* init_mcast - reset multicast list
* init_sj - find or start a BSS
* init_assoc - associate with a ESSID if needed
*
* They are only actually executed if the card is not running
*/
ncom = 0;
com[ncom++] = RAY_COM_MALLOC(ray_init_download, RAY_COM_FCHKRUNNING);
com[ncom++] = RAY_COM_MALLOC(ray_init_mcast, RAY_COM_FCHKRUNNING);
com[ncom++] = RAY_COM_MALLOC(ray_init_sj, RAY_COM_FCHKRUNNING);
com[ncom++] = RAY_COM_MALLOC(ray_init_assoc, RAY_COM_FCHKRUNNING);
/*
* Create runq entries to process flags
*
* promisc - set/reset PROMISC and ALLMULTI flags
*
* They are only actually executed if the card is running
*/
com[ncom++] = RAY_COM_MALLOC(ray_promisc, 0);
RAY_COM_RUNQ(sc, com, ncom, "rayinit", error);
/* XXX no real error processing from anything yet! */
RAY_COM_FREE(com, ncom);
return (error);
}
/*
* Runq entry for resetting driver and downloading start up structures to card
*/
static void
ray_init_download(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
/*
* If card already running we don't need to download.
*/
if ((com->c_flags & RAY_COM_FCHKRUNNING) &&
(ifp->if_flags & IFF_RUNNING)) {
ray_com_runq_done(sc);
return;
}
/*
* Reset instance variables
*
* The first set are network parameters that are read back when
* the card starts or joins the network.
*
* The second set are network parameters that are downloaded to
* the card.
*
* The third set are driver parameters.
*
* All of the variables in these sets can be updated by the
* card or ioctls.
*
* XXX see the ray_attach section for stuff to move
*/
sc->sc_d.np_upd_param = 0;
bzero(sc->sc_d.np_bss_id, ETHER_ADDR_LEN);
sc->sc_d.np_inited = 0;
sc->sc_d.np_def_txrate = RAY_MIB_BASIC_RATE_SET_DEFAULT;
sc->sc_d.np_encrypt = 0;
sc->sc_d.np_net_type = RAY_MIB_NET_TYPE_DEFAULT;
bzero(sc->sc_d.np_ssid, IEEE80211_NWID_LEN);
strncpy(sc->sc_d.np_ssid, RAY_MIB_SSID_DEFAULT, IEEE80211_NWID_LEN);
sc->sc_d.np_priv_start = RAY_MIB_PRIVACY_MUST_START_DEFAULT;
sc->sc_d.np_priv_join = RAY_MIB_PRIVACY_CAN_JOIN_DEFAULT;
sc->sc_d.np_ap_status = RAY_MIB_AP_STATUS_DEFAULT;
sc->sc_d.np_promisc = !!(ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI));
sc->framing = SC_FRAMING_WEBGEAR;
/* XXX this is a hack whilst I transition the code. The instance
* XXX variables above should be set somewhere else. This is needed for
* XXX start_join */
bcopy(&sc->sc_d, &com->c_desired, sizeof(struct ray_nw_param));
/*
* Download the right firmware defaults
*/
if (sc->sc_version == RAY_ECFS_BUILD_4)
ray_init_download_v4(sc, com);
else
ray_init_download_v5(sc, com);
/*
* Kick the card
*/
ray_ccs_fill(sc, com->c_ccs, RAY_CMD_DOWNLOAD_PARAMS);
ray_com_ecf(sc, com);
}
#define PUT2(p, v) \
do { (p)[0] = ((v >> 8) & 0xff); (p)[1] = (v & 0xff); } while(0)
/*
* Firmware version 4 defaults - see if_raymib.h for details
*/
static void
ray_init_download_v4(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ray_mib_4 ray_mib_4_default;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
#define MIB4(m) ray_mib_4_default.##m
MIB4(mib_net_type) = com->c_desired.np_net_type;
MIB4(mib_ap_status) = com->c_desired.np_ap_status;
bcopy(com->c_desired.np_ssid, MIB4(mib_ssid), IEEE80211_NWID_LEN);
MIB4(mib_scan_mode) = RAY_MIB_SCAN_MODE_DEFAULT;
MIB4(mib_apm_mode) = RAY_MIB_APM_MODE_DEFAULT;
bcopy(sc->sc_station_addr, MIB4(mib_mac_addr), ETHER_ADDR_LEN);
PUT2(MIB4(mib_frag_thresh), RAY_MIB_FRAG_THRESH_DEFAULT);
PUT2(MIB4(mib_dwell_time), RAY_MIB_DWELL_TIME_V4);
PUT2(MIB4(mib_beacon_period), RAY_MIB_BEACON_PERIOD_V4);
MIB4(mib_dtim_interval) = RAY_MIB_DTIM_INTERVAL_DEFAULT;
MIB4(mib_max_retry) = RAY_MIB_MAX_RETRY_DEFAULT;
MIB4(mib_ack_timo) = RAY_MIB_ACK_TIMO_DEFAULT;
MIB4(mib_sifs) = RAY_MIB_SIFS_DEFAULT;
MIB4(mib_difs) = RAY_MIB_DIFS_DEFAULT;
MIB4(mib_pifs) = RAY_MIB_PIFS_V4;
PUT2(MIB4(mib_rts_thresh), RAY_MIB_RTS_THRESH_DEFAULT);
PUT2(MIB4(mib_scan_dwell), RAY_MIB_SCAN_DWELL_V4);
PUT2(MIB4(mib_scan_max_dwell), RAY_MIB_SCAN_MAX_DWELL_V4);
MIB4(mib_assoc_timo) = RAY_MIB_ASSOC_TIMO_DEFAULT;
MIB4(mib_adhoc_scan_cycle) = RAY_MIB_ADHOC_SCAN_CYCLE_DEFAULT;
MIB4(mib_infra_scan_cycle) = RAY_MIB_INFRA_SCAN_CYCLE_DEFAULT;
MIB4(mib_infra_super_scan_cycle)
= RAY_MIB_INFRA_SUPER_SCAN_CYCLE_DEFAULT;
MIB4(mib_promisc) = com->c_desired.np_promisc;
PUT2(MIB4(mib_uniq_word), RAY_MIB_UNIQ_WORD_DEFAULT);
MIB4(mib_slot_time) = RAY_MIB_SLOT_TIME_V4;
MIB4(mib_roam_low_snr_thresh) = RAY_MIB_ROAM_LOW_SNR_THRESH_DEFAULT;
MIB4(mib_low_snr_count) = RAY_MIB_LOW_SNR_COUNT_DEFAULT;
MIB4(mib_infra_missed_beacon_count)
= RAY_MIB_INFRA_MISSED_BEACON_COUNT_DEFAULT;
MIB4(mib_adhoc_missed_beacon_count)
= RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DEFAULT;
MIB4(mib_country_code) = RAY_MIB_COUNTRY_CODE_DEFAULT;
MIB4(mib_hop_seq) = RAY_MIB_HOP_SEQ_DEFAULT;
MIB4(mib_hop_seq_len) = RAY_MIB_HOP_SEQ_LEN_V4;
MIB4(mib_cw_max) = RAY_MIB_CW_MAX_V4;
MIB4(mib_cw_min) = RAY_MIB_CW_MIN_V4;
MIB4(mib_noise_filter_gain) = RAY_MIB_NOISE_FILTER_GAIN_DEFAULT;
MIB4(mib_noise_limit_offset) = RAY_MIB_NOISE_LIMIT_OFFSET_DEFAULT;
MIB4(mib_rssi_thresh_offset) = RAY_MIB_RSSI_THRESH_OFFSET_DEFAULT;
MIB4(mib_busy_thresh_offset) = RAY_MIB_BUSY_THRESH_OFFSET_DEFAULT;
MIB4(mib_sync_thresh) = RAY_MIB_SYNC_THRESH_DEFAULT;
MIB4(mib_test_mode) = RAY_MIB_TEST_MODE_DEFAULT;
MIB4(mib_test_min_chan) = RAY_MIB_TEST_MIN_CHAN_DEFAULT;
MIB4(mib_test_max_chan) = RAY_MIB_TEST_MAX_CHAN_DEFAULT;
#undef MIB4
SRAM_WRITE_REGION(sc, RAY_HOST_TO_ECF_BASE,
&ray_mib_4_default, sizeof(ray_mib_4_default));
}
/*
* Firmware version 5 defaults - see if_raymib.h for details
*/
static void
ray_init_download_v5(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ray_mib_5 ray_mib_5_default;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
#define MIB5(m) ray_mib_5_default.##m
MIB5(mib_net_type) = com->c_desired.np_net_type;
MIB5(mib_ap_status) = com->c_desired.np_ap_status;
bcopy(com->c_desired.np_ssid, MIB5(mib_ssid), IEEE80211_NWID_LEN);
MIB5(mib_scan_mode) = RAY_MIB_SCAN_MODE_DEFAULT;
MIB5(mib_apm_mode) = RAY_MIB_APM_MODE_DEFAULT;
bcopy(sc->sc_station_addr, MIB5(mib_mac_addr), ETHER_ADDR_LEN);
PUT2(MIB5(mib_frag_thresh), RAY_MIB_FRAG_THRESH_DEFAULT);
PUT2(MIB5(mib_dwell_time), RAY_MIB_DWELL_TIME_V5);
PUT2(MIB5(mib_beacon_period), RAY_MIB_BEACON_PERIOD_V5);
MIB5(mib_dtim_interval) = RAY_MIB_DTIM_INTERVAL_DEFAULT;
MIB5(mib_max_retry) = RAY_MIB_MAX_RETRY_DEFAULT;
MIB5(mib_ack_timo) = RAY_MIB_ACK_TIMO_DEFAULT;
MIB5(mib_sifs) = RAY_MIB_SIFS_DEFAULT;
MIB5(mib_difs) = RAY_MIB_DIFS_DEFAULT;
MIB5(mib_pifs) = RAY_MIB_PIFS_V5;
PUT2(MIB5(mib_rts_thresh), RAY_MIB_RTS_THRESH_DEFAULT);
PUT2(MIB5(mib_scan_dwell), RAY_MIB_SCAN_DWELL_V5);
PUT2(MIB5(mib_scan_max_dwell), RAY_MIB_SCAN_MAX_DWELL_V5);
MIB5(mib_assoc_timo) = RAY_MIB_ASSOC_TIMO_DEFAULT;
MIB5(mib_adhoc_scan_cycle) = RAY_MIB_ADHOC_SCAN_CYCLE_DEFAULT;
MIB5(mib_infra_scan_cycle) = RAY_MIB_INFRA_SCAN_CYCLE_DEFAULT;
MIB5(mib_infra_super_scan_cycle)
= RAY_MIB_INFRA_SUPER_SCAN_CYCLE_DEFAULT;
MIB5(mib_promisc) = com->c_desired.np_promisc;
PUT2(MIB5(mib_uniq_word), RAY_MIB_UNIQ_WORD_DEFAULT);
MIB5(mib_slot_time) = RAY_MIB_SLOT_TIME_V5;
MIB5(mib_roam_low_snr_thresh) = RAY_MIB_ROAM_LOW_SNR_THRESH_DEFAULT;
MIB5(mib_low_snr_count) = RAY_MIB_LOW_SNR_COUNT_DEFAULT;
MIB5(mib_infra_missed_beacon_count)
= RAY_MIB_INFRA_MISSED_BEACON_COUNT_DEFAULT;
MIB5(mib_adhoc_missed_beacon_count)
= RAY_MIB_ADHOC_MISSED_BEACON_COUNT_DEFAULT;
MIB5(mib_country_code) = RAY_MIB_COUNTRY_CODE_DEFAULT;
MIB5(mib_hop_seq) = RAY_MIB_HOP_SEQ_DEFAULT;
MIB5(mib_hop_seq_len) = RAY_MIB_HOP_SEQ_LEN_V5;
PUT2(MIB5(mib_cw_max), RAY_MIB_CW_MAX_V5);
PUT2(MIB5(mib_cw_min), RAY_MIB_CW_MIN_V5);
MIB5(mib_noise_filter_gain) = RAY_MIB_NOISE_FILTER_GAIN_DEFAULT;
MIB5(mib_noise_limit_offset) = RAY_MIB_NOISE_LIMIT_OFFSET_DEFAULT;
MIB5(mib_rssi_thresh_offset) = RAY_MIB_RSSI_THRESH_OFFSET_DEFAULT;
MIB5(mib_busy_thresh_offset) = RAY_MIB_BUSY_THRESH_OFFSET_DEFAULT;
MIB5(mib_sync_thresh) = RAY_MIB_SYNC_THRESH_DEFAULT;
MIB5(mib_test_mode) = RAY_MIB_TEST_MODE_DEFAULT;
MIB5(mib_test_min_chan) = RAY_MIB_TEST_MIN_CHAN_DEFAULT;
MIB5(mib_test_max_chan) = RAY_MIB_TEST_MAX_CHAN_DEFAULT;
MIB5(mib_allow_probe_resp) = RAY_MIB_ALLOW_PROBE_RESP_DEFAULT;
MIB5(mib_privacy_must_start) = com->c_desired.np_priv_start;
MIB5(mib_privacy_can_join) = com->c_desired.np_priv_join;
MIB5(mib_basic_rate_set[0]) = com->c_desired.np_def_txrate;
#undef MIB5
SRAM_WRITE_REGION(sc, RAY_HOST_TO_ECF_BASE,
&ray_mib_5_default, sizeof(ray_mib_5_default));
}
#undef PUT2
/*
* Download completion routine
*/
static void
ray_init_download_done(struct ray_softc *sc, size_t ccs)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_COM_CHECK(sc, ccs);
ray_com_ecf_done(sc);
}
/*
* Runq entry to empty the multicast filter list
*/
static void
ray_init_mcast(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
/*
* If card is already running we don't need to reset the list
*/
if ((com->c_flags & RAY_COM_FCHKRUNNING) &&
(ifp->if_flags & IFF_RUNNING)) {
ray_com_runq_done(sc);
return;
}
/*
* Kick the card
*/
ray_ccs_fill(sc, com->c_ccs, RAY_CMD_UPDATE_MCAST);
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_update_mcast, c_nmcast, 0);
ray_com_ecf(sc, com);
}
/*
* Runq entry to starting or joining a network
*/
static void
ray_init_sj(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ray_net_params np;
int update;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
/*
* If card already running we don't need to start the n/w.
*/
if ((com->c_flags & RAY_COM_FCHKRUNNING) &&
(ifp->if_flags & IFF_RUNNING)) {
ray_com_runq_done(sc);
return;
}
sc->sc_havenet = 0;
if (sc->sc_d.np_net_type == RAY_MIB_NET_TYPE_ADHOC)
ray_ccs_fill(sc, com->c_ccs, RAY_CMD_START_NET);
else
ray_ccs_fill(sc, com->c_ccs, RAY_CMD_JOIN_NET);
update = 0;
if (sc->sc_c.np_net_type != sc->sc_d.np_net_type)
update++;
if (bcmp(sc->sc_c.np_ssid, sc->sc_d.np_ssid, IEEE80211_NWID_LEN))
update++;
if (sc->sc_c.np_priv_join != sc->sc_d.np_priv_join)
update++;
if (sc->sc_c.np_priv_start != sc->sc_d.np_priv_start)
update++;
RAY_DPRINTF(sc, RAY_DBG_STARTJOIN,
"%s updating nw params", update?"is":"not");
if (update) {
bzero(&np, sizeof(np));
np.p_net_type = sc->sc_d.np_net_type;
bcopy(sc->sc_d.np_ssid, np.p_ssid, IEEE80211_NWID_LEN);
np.p_privacy_must_start = sc->sc_d.np_priv_start;
np.p_privacy_can_join = sc->sc_d.np_priv_join;
SRAM_WRITE_REGION(sc, RAY_HOST_TO_ECF_BASE, &np, sizeof(np));
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_net, c_upd_param, 1);
} else
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_net, c_upd_param, 0);
/*
* Kick the card
*/
ray_com_ecf(sc, com);
}
/*
* Complete start command or intermediate step in assoc command
*/
static void
ray_init_sj_done(struct ray_softc *sc, size_t ccs)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_MAP_CM(sc);
RAY_COM_CHECK(sc, ccs);
/*
* Read back network parameters that the ECF sets
*/
SRAM_READ_REGION(sc, ccs, &sc->sc_c.p_1, sizeof(struct ray_cmd_net));
/* Adjust values for buggy build 4 */
if (sc->sc_c.np_def_txrate == 0x55)
sc->sc_c.np_def_txrate = sc->sc_d.np_def_txrate;
if (sc->sc_c.np_encrypt == 0x55)
sc->sc_c.np_encrypt = sc->sc_d.np_encrypt;
/*
* Update our local state if we updated the network parameters
* when the START_NET or JOIN_NET was issued.
*/
if (sc->sc_c.np_upd_param) {
RAY_DPRINTF(sc, RAY_DBG_STARTJOIN, "updated parameters");
SRAM_READ_REGION(sc, RAY_HOST_TO_ECF_BASE,
&sc->sc_c.p_2, sizeof(struct ray_net_params));
}
/*
* Hurrah! The network is now active.
*
* Clearing IFF_OACTIVE will ensure that the system will send us
* packets. Just before we return from the interrupt context
* we check to see if packets have been queued.
*/
if (SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_cmd) == RAY_CMD_START_NET) {
sc->sc_havenet = 1;
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
}
ray_com_ecf_done(sc);
}
/*
* Runq entry to starting an association with an access point
*/
static void
ray_init_assoc(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
/*
* Don't do anything if we are not in a managed network
*/
if (sc->sc_c.np_net_type != RAY_MIB_NET_TYPE_INFRA) {
ray_com_runq_done(sc);
return;
}
/*
* If card already running we don't need to associate.
*/
if ((com->c_flags & RAY_COM_FCHKRUNNING) &&
(ifp->if_flags & IFF_RUNNING)) {
ray_com_runq_done(sc);
return;
}
/*
* Kick the card
*/
ray_ccs_fill(sc, com->c_ccs, RAY_CMD_START_ASSOC);
ray_com_ecf(sc, com);
}
/*
* Complete association
*/
static void
ray_init_assoc_done(struct ray_softc *sc, size_t ccs)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STARTJOIN, "");
RAY_COM_CHECK(sc, ccs);
/*
* Hurrah! The network is now active.
*
* Clearing IFF_OACTIVE will ensure that the system will send us
* packets. Just before we return from the interrupt context
* we check to see if packets have been queued.
*/
sc->sc_havenet = 1;
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
ray_com_ecf_done(sc);
}
/*
* Network stop.
*
* Inhibit card - if we can't prevent reception then do not worry;
* stopping a NIC only guarantees no TX.
*
* The change to the interface flags is done via the runq so that any
* existing commands can execute normally.
*/
static int
ray_stop_user(struct ray_softc *sc)
{
struct ray_comq_entry *com[1];
int error, ncom;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STOP, "");
/*
* Schedule the real stop routine
*/
ncom = 0;
com[ncom++] = RAY_COM_MALLOC(ray_stop, 0);
RAY_COM_RUNQ(sc, com, ncom, "raystop", error);
/* XXX no real error processing from anything yet! */
RAY_COM_FREE(com, ncom);
return (error);
}
/*
* Runq entry for stopping the interface activity
*/
static void
ray_stop(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *m;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_STOP, "");
/*
* Mark as not running and drain output queue
*/
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
ifp->if_timer = 0;
for (;;) {
IF_DEQUEUE(&ifp->if_snd, m);
if (m == NULL)
break;
m_freem(m);
}
ray_com_runq_done(sc);
}
static void
ray_watchdog(struct ifnet *ifp)
{
struct ray_softc *sc = ifp->if_softc;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
if ((sc == NULL) || (sc->gone))
return;
RAY_PRINTF(sc, "watchdog timeout");
}
/*
* Transmit packet handling
*/
/*
* Send a packet.
*
* We make two assumptions here:
* 1) That the current priority is set to splimp _before_ this code
* is called *and* is returned to the appropriate priority after
* return
* 2) That the IFF_OACTIVE flag is checked before this code is called
* (i.e. that the output part of the interface is idle)
*
* A simple one packet at a time TX routine is used - we don't bother
* chaining TX buffers. Performance is sufficient to max out the
* wireless link on a P75.
*
* AST J30 Windows 95A (100MHz Pentium) to
* Libretto 50CT FreeBSD-3.1 (75MHz Pentium) 167.37kB/s
* Nonname box FreeBSD-3.4 (233MHz AMD K6) 161.82kB/s
*
* Libretto 50CT FreeBSD-3.1 (75MHz Pentium) to
* AST J30 Windows 95A (100MHz Pentium) 167.37kB/s
* Nonname box FreeBSD-3.4 (233MHz AMD K6) 161.38kB/s
*
* Given that 160kB/s is saturating the 2Mb/s wireless link we
* are about there.
*
* In short I'm happy that the added complexity of chaining TX
* packets together isn't worth it for my machines.
*/
static void
ray_tx(struct ifnet *ifp)
{
struct ray_softc *sc = ifp->if_softc;
struct mbuf *m0, *m;
struct ether_header *eh;
size_t ccs, bufp;
int pktlen, len;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_TX, "");
RAY_MAP_CM(sc);
/*
* Some simple checks first - some are overkill
*/
if ((sc == NULL) || (sc->gone))
return;
if (!(ifp->if_flags & IFF_RUNNING)) {
RAY_RECERR(sc, "cannot transmit - not running");
return;
}
if (!sc->sc_havenet) {
RAY_RECERR(sc, "cannot transmit - no network");
return;
}
if (!RAY_ECF_READY(sc)) {
/* Can't assume that the ECF is busy because of this driver */
RAY_RECERR(sc, "cannot transmit - ECF busy");
sc->tx_timerh = timeout(ray_tx_timo, sc, RAY_TX_TIMEOUT);
return;
} else
untimeout(ray_tx_timo, sc, sc->tx_timerh);
/*
* We find a ccs before we process the mbuf so that we are sure it
* is worthwhile processing the packet. All errors in the mbuf
* processing are either errors in the mbuf or gross configuration
* errors and the packet wouldn't get through anyway.
*/
if (ray_ccs_tx(sc, &ccs, &bufp)) {
ifp->if_flags |= IFF_OACTIVE;
return;
}
/*
* Get the mbuf and process it - we have to remember to free the
* ccs if there are any errors
*/
IF_DEQUEUE(&ifp->if_snd, m0);
if (m0 == NULL) {
RAY_CCS_FREE(sc, ccs);
return;
}
eh = mtod(m0, struct ether_header *);
pktlen = m0->m_pkthdr.len;
if (pktlen > ETHER_MAX_LEN - ETHER_CRC_LEN) {
RAY_RECERR(sc, "mbuf too long %d", pktlen);
RAY_CCS_FREE(sc, ccs);
ifp->if_oerrors++;
m_freem(m0);
return;
}
/*
* Write the header according to network type etc.
*/
if (sc->sc_c.np_net_type == RAY_MIB_NET_TYPE_ADHOC)
bufp = ray_tx_wrhdr(sc, bufp,
IEEE80211_FC0_TYPE_DATA,
IEEE80211_FC1_DIR_NODS,
eh->ether_dhost,
eh->ether_shost,
sc->sc_c.np_bss_id);
else
if (sc->sc_c.np_ap_status == RAY_MIB_AP_STATUS_TERMINAL)
bufp = ray_tx_wrhdr(sc, bufp,
IEEE80211_FC0_TYPE_DATA,
IEEE80211_FC1_DIR_TODS,
sc->sc_c.np_bss_id,
eh->ether_shost,
eh->ether_dhost);
else
bufp = ray_tx_wrhdr(sc, bufp,
IEEE80211_FC0_TYPE_DATA,
IEEE80211_FC1_DIR_FROMDS,
eh->ether_dhost,
sc->sc_c.np_bss_id,
eh->ether_shost);
/*
* Translation - capability as described earlier
*
* Remove/modify/addto the 802.3 and 802.2 headers as needed.
*
* We've pulled up the mbuf for you.
*
*/
if (m0->m_len < sizeof(struct ether_header))
m0 = m_pullup(m0, sizeof(struct ether_header));
if (m0 == NULL) {
RAY_RECERR(sc, "could not pullup ether");
RAY_CCS_FREE(sc, ccs);
ifp->if_oerrors++;
return;
}
switch (sc->framing) {
case SC_FRAMING_WEBGEAR:
/* Nice and easy - nothing! (just add an 802.11 header) */
break;
default:
RAY_RECERR(sc, "unknown framing type %d", sc->framing);
RAY_CCS_FREE(sc, ccs);
ifp->if_oerrors++;
m_freem(m0);
return;
}
if (m0 == NULL) {
RAY_RECERR(sc, "could not translate packet");
RAY_CCS_FREE(sc, ccs);
ifp->if_oerrors++;
return;
}
/*
* Copy the mbuf to the buffer in common memory
*
* We panic and don't bother wrapping as ethernet packets are 1518
* bytes, we checked the mbuf earlier, and our TX buffers are 2048
* bytes. We don't have 530 bytes of headers etc. so something
* must be fubar.
*/
pktlen = sizeof(struct ieee80211_frame);
for (m = m0; m != NULL; m = m->m_next) {
pktlen += m->m_len;
if ((len = m->m_len) == 0)
continue;
if ((bufp + len) < RAY_TX_END)
SRAM_WRITE_REGION(sc, bufp, mtod(m, u_int8_t *), len);
else
RAY_PANIC(sc, "tx buffer overflow");
bufp += len;
}
RAY_MBUF_DUMP(sc, RAY_DBG_TX, m0, "ray_tx");
/*
* Send it off
*/
if (ray_tx_send(sc, ccs, pktlen, eh->ether_dhost))
ifp->if_oerrors++;
else
ifp->if_opackets++;
m_freem(m0);
}
/*
* Start timeout routine.
*
* Used when card was busy but we needed to send a packet.
*/
static void
ray_tx_timo(void *xsc)
{
struct ray_softc *sc = (struct ray_softc *)xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
int s;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
if (!(ifp->if_flags & IFF_OACTIVE) && (ifp->if_snd.ifq_head != NULL)) {
s = splimp();
ray_tx(ifp);
splx(s);
}
}
/*
* Write an 802.11 header into the Tx buffer space and return the
* adjusted buffer pointer.
*/
static size_t
ray_tx_wrhdr(struct ray_softc *sc, size_t bufp, u_int8_t type, u_int8_t fc1, u_int8_t *addr1, u_int8_t *addr2, u_int8_t *addr3)
{
struct ieee80211_frame header;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_TX, "");
RAY_MAP_CM(sc);
bzero(&header, sizeof(struct ieee80211_frame));
header.i_fc[0] = (IEEE80211_FC0_VERSION_0 | type);
header.i_fc[1] = fc1;
bcopy(addr1, header.i_addr1, ETHER_ADDR_LEN);
bcopy(addr2, header.i_addr2, ETHER_ADDR_LEN);
bcopy(addr3, header.i_addr3, ETHER_ADDR_LEN);
SRAM_WRITE_REGION(sc, bufp, (u_int8_t *)&header,
sizeof(struct ieee80211_frame));
return (bufp + sizeof(struct ieee80211_frame));
}
/*
* Fill in a few loose ends and kick the card to send the packet
*
* Returns 0 on success, 1 on failure
*/
static int
ray_tx_send(struct ray_softc *sc, size_t ccs, int pktlen, u_int8_t *dst)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_TX, "");
RAY_MAP_CM(sc);
if (!RAY_ECF_READY(sc)) {
/*
* XXX If this can really happen perhaps we need to save
* XXX the chain and use it later.
*/
RAY_RECERR(sc, "ECF busy, dropping packet");
RAY_CCS_FREE(sc, ccs);
return (1);
}
SRAM_WRITE_FIELD_2(sc, ccs, ray_cmd_tx, c_len, pktlen);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_antenna,
ray_tx_best_antenna(sc, dst));
SRAM_WRITE_1(sc, RAY_SCB_CCSI, RAY_CCS_INDEX(ccs));
RAY_ECF_START_CMD(sc);
return (0);
}
/*
* Determine best antenna to use from rx level and antenna cache
*/
static u_int8_t
ray_tx_best_antenna(struct ray_softc *sc, u_int8_t *dst)
{
struct ray_siglev *sl;
int i;
u_int8_t antenna;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_TX, "");
if (sc->sc_version == RAY_ECFS_BUILD_4)
return (0);
/* try to find host */
for (i = 0; i < RAY_NSIGLEVRECS; i++) {
sl = &sc->sc_siglevs[i];
if (bcmp(sl->rsl_host, dst, ETHER_ADDR_LEN) == 0)
goto found;
}
/* not found, return default setting */
return (0);
found:
/* This is a simple thresholding scheme that takes the mean
* of the best antenna history. This is okay but as it is a
* filter, it adds a bit of lag in situations where the
* best antenna swaps from one side to the other slowly. Don't know
* how likely this is given the horrible fading though.
*/
antenna = 0;
for (i = 0; i < RAY_NANTENNA; i++) {
antenna += sl->rsl_antennas[i];
}
return (antenna > (RAY_NANTENNA >> 1));
}
/*
* Transmit now complete so clear ccs and network flags.
*/
static void
ray_tx_done(struct ray_softc *sc, size_t ccs)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
char *ss[] = RAY_CCS_STATUS_STRINGS;
u_int8_t status;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_TX, "");
RAY_MAP_CM(sc);
status = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_status);
if (status != RAY_CCS_STATUS_COMPLETE) {
RAY_RECERR(sc, "tx completed but status is %s", ss[status]);
ifp->if_oerrors++;
}
RAY_CCS_FREE(sc, ccs);
ifp->if_timer = 0;
if (ifp->if_flags & IFF_OACTIVE)
ifp->if_flags &= ~IFF_OACTIVE;
}
/*
* Receiver packet handling
*/
/*
* Receive a packet from the card
*/
static void
ray_rx(struct ray_softc *sc, size_t rcs)
{
struct ieee80211_frame *header;
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *m0;
size_t pktlen, fraglen, readlen, tmplen;
size_t bufp, ebufp;
u_int8_t siglev, antenna;
u_int first, ni, i;
u_int8_t *mp;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
RAY_DPRINTF(sc, RAY_DBG_CCS, "using rcs 0x%x", rcs);
m0 = NULL;
readlen = 0;
/*
* Get first part of packet and the length. Do some sanity checks
* and get a mbuf.
*/
first = RAY_CCS_INDEX(rcs);
pktlen = SRAM_READ_FIELD_2(sc, rcs, ray_cmd_rx, c_pktlen);
siglev = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_siglev);
antenna = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_antenna);
if ((pktlen > MCLBYTES) || (pktlen < sizeof(struct ieee80211_frame))) {
RAY_RECERR(sc, "packet too big or too small");
ifp->if_ierrors++;
goto skip_read;
}
MGETHDR(m0, M_DONTWAIT, MT_DATA);
if (m0 == NULL) {
RAY_RECERR(sc, "MGETHDR failed");
ifp->if_ierrors++;
goto skip_read;
}
if (pktlen > MHLEN) {
MCLGET(m0, M_DONTWAIT);
if (!(m0->m_flags & M_EXT)) {
RAY_RECERR(sc, "MCLGET failed");
ifp->if_ierrors++;
m_freem(m0);
m0 = NULL;
goto skip_read;
}
}
m0->m_pkthdr.rcvif = ifp;
m0->m_pkthdr.len = pktlen;
m0->m_len = pktlen;
mp = mtod(m0, u_int8_t *);
/*
* Walk the fragment chain to build the complete packet.
*
* The use of two index variables removes a race with the
* hardware. If one index were used the clearing of the CCS would
* happen before reading the next pointer and the hardware can get in.
* Not my idea but verbatim from the NetBSD driver.
*/
i = ni = first;
while ((i = ni) && (i != RAY_CCS_LINK_NULL)) {
rcs = RAY_CCS_ADDRESS(i);
ni = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_nextfrag);
bufp = SRAM_READ_FIELD_2(sc, rcs, ray_cmd_rx, c_bufp);
fraglen = SRAM_READ_FIELD_2(sc, rcs, ray_cmd_rx, c_len);
RAY_DPRINTF(sc, RAY_DBG_RX,
"frag index %d len %d bufp 0x%x ni %d",
i, fraglen, (int)bufp, ni);
if (fraglen + readlen > pktlen) {
RAY_RECERR(sc, "bad length current 0x%x pktlen 0x%x",
fraglen + readlen, pktlen);
ifp->if_ierrors++;
m_freem(m0);
m0 = NULL;
goto skip_read;
}
if ((i < RAY_RCS_FIRST) || (i > RAY_RCS_LAST)) {
RAY_RECERR(sc, "bad rcs index 0x%x", i);
ifp->if_ierrors++;
m_freem(m0);
m0 = NULL;
goto skip_read;
}
ebufp = bufp + fraglen;
if (ebufp <= RAY_RX_END)
SRAM_READ_REGION(sc, bufp, mp, fraglen);
else {
SRAM_READ_REGION(sc, bufp, mp,
(tmplen = RAY_RX_END - bufp));
SRAM_READ_REGION(sc, RAY_RX_BASE, mp + tmplen,
ebufp - RAY_RX_END);
}
mp += fraglen;
readlen += fraglen;
}
skip_read:
/*
* Walk the chain again to free the rcss.
*/
i = ni = first;
while ((i = ni) && (i != RAY_CCS_LINK_NULL)) {
rcs = RAY_CCS_ADDRESS(i);
ni = SRAM_READ_FIELD_1(sc, rcs, ray_cmd_rx, c_nextfrag);
RAY_CCS_FREE(sc, rcs);
}
if (m0 == NULL)
return;
/*
* Check the 802.11 packet type and hand off to
* appropriate functions.
*/
header = mtod(m0, struct ieee80211_frame *);
if ((header->i_fc[0] & IEEE80211_FC0_VERSION_MASK)
!= IEEE80211_FC0_VERSION_0) {
RAY_RECERR(sc, "header not version 0 fc0 0x%x",
header->i_fc[0]);
ifp->if_ierrors++;
m_freem(m0);
return;
}
switch (header->i_fc[0] & IEEE80211_FC0_TYPE_MASK) {
case IEEE80211_FC0_TYPE_DATA:
ray_rx_data(sc, m0, siglev, antenna);
break;
case IEEE80211_FC0_TYPE_MGT:
ray_rx_mgt(sc, m0);
break;
case IEEE80211_FC0_TYPE_CTL:
ray_rx_ctl(sc, m0);
break;
default:
RAY_RECERR(sc, "unknown packet fc0 0x%x", header->i_fc[0]);
ifp->if_ierrors++;
m_freem(m0);
}
}
/*
* Deal with DATA packet types
*/
static void
ray_rx_data(struct ray_softc *sc, struct mbuf *m0, u_int8_t siglev, u_int8_t antenna)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ieee80211_frame *header = mtod(m0, struct ieee80211_frame *);
struct ether_header *eh;
u_int8_t *sa, *da, *ra, *ta;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_MGT, "");
/*
* Check the the data packet subtype, some packets have
* nothing in them so we will drop them here.
*/
switch (header->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
case IEEE80211_FC0_SUBTYPE_DATA:
case IEEE80211_FC0_SUBTYPE_CF_ACK:
case IEEE80211_FC0_SUBTYPE_CF_POLL:
case IEEE80211_FC0_SUBTYPE_CF_ACPL:
RAY_DPRINTF(sc, RAY_DBG_RX, "DATA packet");
break;
case IEEE80211_FC0_SUBTYPE_NODATA:
case IEEE80211_FC0_SUBTYPE_CFACK:
case IEEE80211_FC0_SUBTYPE_CFPOLL:
case IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK:
RAY_DPRINTF(sc, RAY_DBG_RX, "NULL packet");
m_freem(m0);
return;
break;
default:
RAY_RECERR(sc, "reserved DATA packet subtype 0x%x",
header->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK);
ifp->if_ierrors++;
m_freem(m0);
return;
}
/*
* Obtain the .11 addresses. Packets may come via APs so the
* MAC addresses of the source/destination may be different
* from the node that actually sent us the packet.
*
* XXX At present this information is unused, although it is
* XXX available for translation routines to use.
*/
switch (header->i_fc[1] & IEEE80211_FC1_DIR_MASK) {
case IEEE80211_FC1_DIR_NODS:
da = header->i_addr1;
sa = header->i_addr2;
ra = ta = NULL;
RAY_DPRINTF(sc, RAY_DBG_RX, "from %6D to %6D",
sa, ":", da, ":");
break;
case IEEE80211_FC1_DIR_FROMDS:
da = header->i_addr1;
ta = header->i_addr2;
sa = header->i_addr3;
ra = NULL;
RAY_DPRINTF(sc, RAY_DBG_RX, "ap %6D from %6D to %6D",
ta, ":", sa, ":", da, ":");
break;
case IEEE80211_FC1_DIR_TODS:
ra = header->i_addr1;
sa = header->i_addr2;
da = header->i_addr3;
ta = NULL;
RAY_DPRINTF(sc, RAY_DBG_RX, "from %6D to %6D ap %6D",
sa, ":", da, ":", ra, ":");
break;
case IEEE80211_FC1_DIR_DSTODS:
ra = header->i_addr1;
ta = header->i_addr2;
da = header->i_addr3;
sa = (u_int8_t *)header+1;
RAY_DPRINTF(sc, RAY_DBG_RX, "from %6D to %6D ap %6D to %6D",
sa, ":", da, ":", ta, ":", ra, ":");
break;
}
/*
* Translation - capability as described earlier
*
* Each case must remove the 802.11 header and leave an 802.3
* header in the mbuf copy addresses as needed.
*/
RAY_MBUF_DUMP(sc, RAY_DBG_RX, m0, "DATA packet before framing");
switch (sc->framing) {
case SC_FRAMING_WEBGEAR:
/* Nice and easy - just trim the 802.11 header */
m_adj(m0, sizeof(struct ieee80211_frame));
break;
default:
RAY_RECERR(sc, "unknown framing type %d", sc->framing);
ifp->if_ierrors++;
m_freem(m0);
return;
}
/*
* Finally, do a bit of house keeping before sending the packet
* up the stack.
*/
ifp->if_ipackets++;
ray_rx_update_cache(sc, header->i_addr2, siglev, antenna);
eh = mtod(m0, struct ether_header *);
m_adj(m0, sizeof(struct ether_header));
ether_input(ifp, eh, m0);
}
/*
* Deal with MGT packet types
*/
static void
ray_rx_mgt(struct ray_softc *sc, struct mbuf *m0)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ieee80211_frame *header = mtod(m0, struct ieee80211_frame *);
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_MGT, "");
if ((header->i_fc[1] & IEEE80211_FC1_DIR_MASK) !=
IEEE80211_FC1_DIR_NODS) {
RAY_RECERR(sc, "MGT TODS/FROMDS wrong fc1 0x%x",
header->i_fc[1] & IEEE80211_FC1_DIR_MASK);
ifp->if_ierrors++;
m_freem(m0);
return;
}
/*
* Check the the mgt packet subtype, some packets should be
* dropped depending on the mode the station is in. See pg
* 52(60) of docs
*
* P - proccess, J - Junk, E - ECF deals with, I - Illegal
* ECF Proccesses
* AHDOC procces or junk
* INFRA STA process or junk
* INFRA AP process or jumk
*
* +PPP IEEE80211_FC0_SUBTYPE_BEACON
* +EEE IEEE80211_FC0_SUBTYPE_PROBE_REQ
* +EEE IEEE80211_FC0_SUBTYPE_PROBE_RESP
* PPP IEEE80211_FC0_SUBTYPE_AUTH
* PPP IEEE80211_FC0_SUBTYPE_DEAUTH
* JJP IEEE80211_FC0_SUBTYPE_ASSOC_REQ
* JPJ IEEE80211_FC0_SUBTYPE_ASSOC_RESP
* JPP IEEE80211_FC0_SUBTYPE_DISASSOC
* JJP IEEE80211_FC0_SUBTYPE_REASSOC_REQ
* JPJ IEEE80211_FC0_SUBTYPE_REASSOC_RESP
* +EEE IEEE80211_FC0_SUBTYPE_ATIM
*/
RAY_MBUF_DUMP(sc, RAY_DBG_RX, m0, "MGT packet");
switch (header->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
case IEEE80211_FC0_SUBTYPE_BEACON:
RAY_DPRINTF(sc, RAY_DBG_MGT, "BEACON MGT packet");
/* XXX furtle anything interesting out */
/* XXX Note that there are rules governing what beacons to
read, see 8802 S7.2.3, S11.1.2.3 */
break;
case IEEE80211_FC0_SUBTYPE_AUTH:
RAY_DPRINTF(sc, RAY_DBG_MGT, "AUTH MGT packet");
ray_rx_mgt_auth(sc, m0);
break;
case IEEE80211_FC0_SUBTYPE_DEAUTH:
RAY_DPRINTF(sc, RAY_DBG_MGT, "DEAUTH MGT packet");
/* XXX ray_rx_mgt_deauth(sc, m0); */
break;
case IEEE80211_FC0_SUBTYPE_ASSOC_REQ:
case IEEE80211_FC0_SUBTYPE_REASSOC_REQ:
RAY_DPRINTF(sc, RAY_DBG_MGT, "(RE)ASSOC_REQ MGT packet");
if ((sc->sc_d.np_net_type == RAY_MIB_NET_TYPE_INFRA) &&
(sc->sc_c.np_ap_status == RAY_MIB_AP_STATUS_AP))
RAY_PANIC(sc, "can't be an AP yet"); /* XXX_ACTING_AP */
break;
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
RAY_DPRINTF(sc, RAY_DBG_MGT, "(RE)ASSOC_RESP MGT packet");
if ((sc->sc_d.np_net_type == RAY_MIB_NET_TYPE_INFRA) &&
(sc->sc_c.np_ap_status == RAY_MIB_AP_STATUS_TERMINAL))
RAY_PANIC(sc, "can't be in INFRA yet"); /* XXX_INFRA */
break;
case IEEE80211_FC0_SUBTYPE_DISASSOC:
RAY_DPRINTF(sc, RAY_DBG_MGT, "DISASSOC MGT packet");
if (sc->sc_d.np_net_type == RAY_MIB_NET_TYPE_INFRA)
RAY_PANIC(sc, "can't be in INFRA yet"); /* XXX_INFRA */
break;
case IEEE80211_FC0_SUBTYPE_PROBE_REQ:
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
case IEEE80211_FC0_SUBTYPE_ATIM:
RAY_RECERR(sc, "unexpected MGT packet subtype 0x%0x",
header->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK);
ifp->if_ierrors++;
break;
default:
RAY_RECERR(sc, "reserved MGT packet subtype 0x%x",
header->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK);
ifp->if_ierrors++;
}
m_freem(m0);
}
/*
* Deal with AUTH management packet types
*/
static void
ray_rx_mgt_auth(struct ray_softc *sc, struct mbuf *m0)
{
struct ieee80211_frame *header = mtod(m0, struct ieee80211_frame *);
ieee80211_mgt_auth_t auth = (u_int8_t *)(header+1);
size_t ccs, bufp;
int pktlen;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_MGT, "");
RAY_MAP_CM(sc);
switch (IEEE80211_AUTH_ALGORITHM(auth)) {
case IEEE80211_AUTH_ALG_OPEN:
RAY_RECERR(sc, "open system authentication request");
if (IEEE80211_AUTH_TRANSACTION(auth) == 1) {
/* XXX see sys/dev/awi/awk.c:awi_{recv|send}_auth */
/*
* Send authentication response if possible. If
* we are out of CCSs we don't to anything, the
* other end will try again.
*/
if (ray_ccs_tx(sc, &ccs, &bufp)) {
return;
}
RAY_DPRINTF(sc, RAY_DBG_MGT, "bufp %x", bufp);
bufp = ray_tx_wrhdr(sc, bufp,
IEEE80211_FC0_TYPE_MGT |
IEEE80211_FC0_SUBTYPE_AUTH,
IEEE80211_FC1_DIR_NODS,
header->i_addr2,
header->i_addr1,
header->i_addr3);
for (pktlen = 0; pktlen < 6; pktlen++)
SRAM_WRITE_1(sc, bufp+pktlen, 0);
pktlen += sizeof(struct ieee80211_frame);
SRAM_WRITE_1(sc, bufp+2, 2);
RAY_DPRINTF(sc, RAY_DBG_MGT, "dump start %x", bufp-pktlen+6);
RAY_DHEX8(sc, RAY_DBG_MGT, bufp-pktlen+6, pktlen, "AUTH MGT response to Open System request");
(void)ray_tx_send(sc, ccs, pktlen, header->i_addr2);
} else if (IEEE80211_AUTH_TRANSACTION(auth) == 2) {
/*
* XXX probably need a lot more than this
* XXX like initiating an auth sequence
*/
if (IEEE80211_AUTH_STATUS(auth) !=
IEEE80211_STATUS_SUCCESS)
RAY_RECERR(sc,
"authentication failed with status %d",
IEEE80211_AUTH_STATUS(auth));
}
break;
case IEEE80211_AUTH_ALG_SHARED:
RAY_RECERR(sc, "shared key authentication request");
break;
default:
RAY_RECERR(sc,
"reserved authentication subtype 0x%04hx",
IEEE80211_AUTH_ALGORITHM(auth));
break;
}
}
/*
* Deal with CTL packet types
*/
static void
ray_rx_ctl(struct ray_softc *sc, struct mbuf *m0)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ieee80211_frame *header = mtod(m0, struct ieee80211_frame *);
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CTL, "");
if ((header->i_fc[1] & IEEE80211_FC1_DIR_MASK) !=
IEEE80211_FC1_DIR_NODS) {
RAY_RECERR(sc, "CTL TODS/FROMDS wrong fc1 0x%x",
header->i_fc[1] & IEEE80211_FC1_DIR_MASK);
ifp->if_ierrors++;
m_freem(m0);
return;
}
/*
* Check the the ctl packet subtype, some packets should be
* dropped depending on the mode the station is in. The ECF
* should deal with everything but the power save poll to an
* AP. See pg 52(60) of docs.
*/
RAY_MBUF_DUMP(sc, RAY_DBG_CTL, m0, "CTL packet");
switch (header->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
case IEEE80211_FC0_SUBTYPE_PS_POLL:
RAY_DPRINTF(sc, RAY_DBG_CTL, "PS_POLL CTL packet");
if ((sc->sc_d.np_net_type == RAY_MIB_NET_TYPE_INFRA) &&
(sc->sc_c.np_ap_status == RAY_MIB_AP_STATUS_AP))
RAY_PANIC(sc, "can't be an AP yet"); /* XXX_ACTING_AP */
break;
case IEEE80211_FC0_SUBTYPE_RTS:
case IEEE80211_FC0_SUBTYPE_CTS:
case IEEE80211_FC0_SUBTYPE_ACK:
case IEEE80211_FC0_SUBTYPE_CF_END:
case IEEE80211_FC0_SUBTYPE_CF_END_ACK:
RAY_RECERR(sc, "unexpected CTL packet subtype 0x%0x",
header->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK);
ifp->if_ierrors++;
break;
default:
RAY_RECERR(sc, "reserved CTL packet subtype 0x%x",
header->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK);
ifp->if_ierrors++;
}
m_freem(m0);
}
/*
* Update rx level and antenna cache
*/
static void
ray_rx_update_cache(struct ray_softc *sc, u_int8_t *src, u_int8_t siglev, u_int8_t antenna)
{
struct timeval mint;
struct ray_siglev *sl;
int i, mini;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
/* Try to find host */
for (i = 0; i < RAY_NSIGLEVRECS; i++) {
sl = &sc->sc_siglevs[i];
if (bcmp(sl->rsl_host, src, ETHER_ADDR_LEN) == 0)
goto found;
}
/* Not found, find oldest slot */
mini = 0;
mint.tv_sec = LONG_MAX;
mint.tv_usec = 0;
for (i = 0; i < RAY_NSIGLEVRECS; i++) {
sl = &sc->sc_siglevs[i];
if (timevalcmp(&sl->rsl_time, &mint, <)) {
mini = i;
mint = sl->rsl_time;
}
}
sl = &sc->sc_siglevs[mini];
bzero(sl->rsl_siglevs, RAY_NSIGLEV);
bzero(sl->rsl_antennas, RAY_NANTENNA);
bcopy(src, sl->rsl_host, ETHER_ADDR_LEN);
found:
microtime(&sl->rsl_time);
bcopy(sl->rsl_siglevs, &sl->rsl_siglevs[1], RAY_NSIGLEV-1);
sl->rsl_siglevs[0] = siglev;
if (sc->sc_version != RAY_ECFS_BUILD_4) {
bcopy(sl->rsl_antennas, &sl->rsl_antennas[1], RAY_NANTENNA-1);
sl->rsl_antennas[0] = antenna;
}
}
/*
* Interrupt handling
*/
/*
* Process an interrupt
*/
static void
ray_intr(void *xsc)
{
struct ray_softc *sc = (struct ray_softc *)xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
size_t ccs;
u_int8_t cmd;
int ccsi;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
if ((sc == NULL) || (sc->gone))
return;
/*
* Check that the interrupt was for us, if so get the rcs/ccs
* and vector on the command contained within it.
*/
if (RAY_HCS_INTR(sc)) {
ccsi = SRAM_READ_1(sc, RAY_SCB_RCSI);
ccs = RAY_CCS_ADDRESS(ccsi);
cmd = SRAM_READ_FIELD_1(sc, ccs, ray_cmd, c_cmd);
if (ccsi <= RAY_CCS_LAST)
ray_intr_ccs(sc, cmd, ccs);
else if (ccsi <= RAY_RCS_LAST)
ray_intr_rcs(sc, cmd, ccs);
else
RAY_RECERR(sc, "bad ccs index 0x%x", ccsi);
RAY_HCS_CLEAR_INTR(sc);
RAY_DPRINTF(sc, RAY_DBG_RX, "interrupt was handled");
}
/* Send any packets lying around and update error counters */
if (!(ifp->if_flags & IFF_OACTIVE) && (ifp->if_snd.ifq_head != NULL))
ray_tx(ifp);
if ((++sc->sc_checkcounters % 32) == 0)
ray_intr_updt_errcntrs(sc);
}
/*
* Read the error counters.
*/
static void
ray_intr_updt_errcntrs(struct ray_softc *sc)
{
size_t csc;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
/*
* The card implements the following protocol to keep the
* values from being changed while read: It checks the `own'
* bit and if zero writes the current internal counter value,
* it then sets the `own' bit to 1. If the `own' bit was 1 it
* incremenets its internal counter. The user thus reads the
* counter if the `own' bit is one and then sets the own bit
* to 0.
*/
csc = RAY_STATUS_BASE;
if (SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_mrxo_own)) {
sc->sc_rxoverflow +=
SRAM_READ_FIELD_2(sc, csc, ray_csc, csc_mrx_overflow);
SRAM_WRITE_FIELD_1(sc, csc, ray_csc, csc_mrxo_own, 0);
}
if (SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_mrxc_own)) {
sc->sc_rxcksum +=
SRAM_READ_FIELD_2(sc, csc, ray_csc, csc_mrx_overflow);
SRAM_WRITE_FIELD_1(sc, csc, ray_csc, csc_mrxc_own, 0);
}
if (SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_rxhc_own)) {
sc->sc_rxhcksum +=
SRAM_READ_FIELD_2(sc, csc, ray_csc, csc_rx_hcksum);
SRAM_WRITE_FIELD_1(sc, csc, ray_csc, csc_rxhc_own, 0);
}
sc->sc_rxnoise = SRAM_READ_FIELD_1(sc, csc, ray_csc, csc_rx_noise);
}
/*
* Process CCS command completion
*/
static void
ray_intr_ccs(struct ray_softc *sc, u_int8_t cmd, size_t ccs)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
switch (cmd) {
case RAY_CMD_DOWNLOAD_PARAMS:
RAY_DPRINTF(sc, RAY_DBG_COM, "START_PARAMS");
ray_init_download_done(sc, ccs);
break;
case RAY_CMD_UPDATE_PARAMS:
RAY_DPRINTF(sc, RAY_DBG_COM, "UPDATE_PARAMS");
ray_upparams_done(sc, ccs);
break;
case RAY_CMD_REPORT_PARAMS:
RAY_DPRINTF(sc, RAY_DBG_COM, "REPORT_PARAMS");
ray_repparams_done(sc, ccs);
break;
case RAY_CMD_UPDATE_MCAST:
RAY_DPRINTF(sc, RAY_DBG_COM, "UPDATE_MCAST");
ray_mcast_done(sc, ccs);
break;
case RAY_CMD_START_NET:
case RAY_CMD_JOIN_NET:
RAY_DPRINTF(sc, RAY_DBG_COM, "START|JOIN_NET");
ray_init_sj_done(sc, ccs);
break;
case RAY_CMD_TX_REQ:
RAY_DPRINTF(sc, RAY_DBG_COM, "TX_REQ");
ray_tx_done(sc, ccs);
break;
case RAY_CMD_START_ASSOC:
RAY_DPRINTF(sc, RAY_DBG_COM, "START_ASSOC");
ray_init_assoc_done(sc, ccs);
break;
case RAY_CMD_UPDATE_APM:
RAY_RECERR(sc, "unexpected UPDATE_APM");
break;
case RAY_CMD_TEST_MEM:
RAY_RECERR(sc, "unexpected TEST_MEM");
break;
case RAY_CMD_SHUTDOWN:
RAY_RECERR(sc, "unexpected SHUTDOWN");
break;
case RAY_CMD_DUMP_MEM:
RAY_RECERR(sc, "unexpected DUMP_MEM");
break;
case RAY_CMD_START_TIMER:
RAY_RECERR(sc, "unexpected START_TIMER");
break;
default:
RAY_RECERR(sc, "unknown command 0x%x", cmd);
break;
}
}
/*
* Process ECF command request
*/
static void
ray_intr_rcs(struct ray_softc *sc, u_int8_t cmd, size_t rcs)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
switch (cmd) {
case RAY_ECMD_RX_DONE:
RAY_DPRINTF(sc, RAY_DBG_RX, "RX_DONE");
ray_rx(sc, rcs);
break;
case RAY_ECMD_REJOIN_DONE:
RAY_DPRINTF(sc, RAY_DBG_RX, "REJOIN_DONE");
sc->sc_havenet = 1; /* XXX Should not be here but in function */
break;
case RAY_ECMD_ROAM_START:
RAY_DPRINTF(sc, RAY_DBG_RX, "ROAM_START");
sc->sc_havenet = 0; /* XXX Should not be here but in function */
break;
case RAY_ECMD_JAPAN_CALL_SIGNAL:
RAY_RECERR(sc, "unexpected JAPAN_CALL_SIGNAL");
break;
default:
RAY_RECERR(sc, "unknown command 0x%x", cmd);
break;
}
RAY_CCS_FREE(sc, rcs);
}
/*
* User land entry to multicast list changes
*/
static int
ray_mcast_user(struct ray_softc *sc)
{
struct ray_comq_entry *com[2];
int error, ncom;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
/*
* Do all checking in the runq to preserve ordering.
*
* We run promisc to pick up changes to the ALL_MULTI
* interface flag.
*/
ncom = 0;
com[ncom++] = RAY_COM_MALLOC(ray_mcast, 0);
com[ncom++] = RAY_COM_MALLOC(ray_promisc, 0);
RAY_COM_RUNQ(sc, com, ncom, "raymcast", error);
/* XXX no real error processing from anything yet! */
RAY_COM_FREE(com, ncom);
return (error);
}
/*
* Runq entry to setting the multicast filter list
*
* MUST always be followed by a call to ray_promisc to pick up changes
* to promisc flag
*/
static void
ray_mcast(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
struct ifmultiaddr *ifma;
size_t bufp;
int count;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
/*
* If card is not running we don't need to update this.
*/
if (!(ifp->if_flags & IFF_RUNNING)) {
RAY_DPRINTF(sc, RAY_DBG_IOCTL, "not running");
ray_com_runq_done(sc);
return;
}
/*
* The multicast list is only 16 items long so use promiscuous
* mode and don't bother updating the multicast list.
*/
for (ifma = ifp->if_multiaddrs.lh_first, count = 0; ifma != NULL;
ifma = ifma->ifma_link.le_next, count++)
if (count == 0) {
ray_com_runq_done(sc);
return;
} else if (count > 16) {
ifp->if_flags |= IFF_ALLMULTI;
ray_com_runq_done(sc);
return;
} else if (ifp->if_flags & IFF_ALLMULTI)
ifp->if_flags &= ~IFF_ALLMULTI;
/*
* Kick the card
*/
ray_ccs_fill(sc, com->c_ccs, RAY_CMD_UPDATE_MCAST);
SRAM_WRITE_FIELD_1(sc, com->c_ccs,
ray_cmd_update_mcast, c_nmcast, count);
bufp = RAY_HOST_TO_ECF_BASE;
for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
ifma = ifma->ifma_link.le_next) {
SRAM_WRITE_REGION(
sc,
bufp,
LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
ETHER_ADDR_LEN
);
bufp += ETHER_ADDR_LEN;
}
ray_com_ecf(sc, com);
}
/*
* Complete the multicast filter list update
*/
static void
ray_mcast_done(struct ray_softc *sc, size_t ccs)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_COM_CHECK(sc, ccs);
ray_com_ecf_done(sc);
}
/*
* Runq entry to set/reset promiscuous mode
*/
static void
ray_promisc(struct ray_softc *sc, struct ray_comq_entry *com)
{
struct ifnet *ifp = &sc->arpcom.ac_if;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
/*
* If card not running or we already have the right flags
* we don't need to update this
*/
sc->sc_d.np_promisc = !!(ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI));
if (!(ifp->if_flags & IFF_RUNNING) ||
(sc->sc_c.np_promisc == sc->sc_d.np_promisc)) {
ray_com_runq_done(sc);
return;
}
/*
* Kick the card
*/
ray_ccs_fill(sc, com->c_ccs, RAY_CMD_UPDATE_PARAMS);
SRAM_WRITE_FIELD_1(sc, com->c_ccs,
ray_cmd_update, c_paramid, RAY_MIB_PROMISC);
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_update, c_nparam, 1);
SRAM_WRITE_1(sc, RAY_HOST_TO_ECF_BASE, sc->sc_d.np_promisc);
ray_com_ecf(sc, com);
}
/*
* User land entry to parameter reporting
*
* As we by pass the runq to report current parameters this function
* only provides a snap shot of the driver's state.
*/
static int
ray_repparams_user(struct ray_softc *sc, struct ray_param_req *pr)
{
struct ray_comq_entry *com[1];
int error, ncom;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
/*
* Test for illegal values or immediate responses
*/
if (pr->r_paramid > RAY_MIB_MAX)
return (EINVAL);
if ((sc->sc_version == RAY_ECFS_BUILD_4) &&
!(mib_info[pr->r_paramid][0] & RAY_V4))
return (EINVAL);
if ((sc->sc_version == RAY_ECFS_BUILD_5) &&
!(mib_info[pr->r_paramid][0] & RAY_V5))
return (EINVAL);
if (pr->r_paramid > RAY_MIB_LASTUSER) {
switch (pr->r_paramid) {
case RAY_MIB_VERSION:
if (sc->sc_version == RAY_ECFS_BUILD_4)
*pr->r_data = RAY_V4;
else
*pr->r_data = RAY_V5;
break;
case RAY_MIB_CUR_BSSID:
bcopy(sc->sc_c.np_bss_id, pr->r_data, ETHER_ADDR_LEN);
break;
case RAY_MIB_CUR_INITED:
*pr->r_data = sc->sc_c.np_inited;
break;
case RAY_MIB_CUR_DEF_TXRATE:
*pr->r_data = sc->sc_c.np_def_txrate;
break;
case RAY_MIB_CUR_ENCRYPT:
*pr->r_data = sc->sc_c.np_encrypt;
break;
case RAY_MIB_CUR_NET_TYPE:
*pr->r_data = sc->sc_c.np_net_type;
break;
case RAY_MIB_CUR_SSID:
bcopy(sc->sc_c.np_ssid, pr->r_data, IEEE80211_NWID_LEN);
break;
case RAY_MIB_CUR_PRIV_START:
*pr->r_data = sc->sc_c.np_priv_start;
break;
case RAY_MIB_CUR_PRIV_JOIN:
*pr->r_data = sc->sc_c.np_priv_join;
break;
case RAY_MIB_DES_BSSID:
bcopy(sc->sc_d.np_bss_id, pr->r_data, ETHER_ADDR_LEN);
break;
case RAY_MIB_DES_INITED:
*pr->r_data = sc->sc_d.np_inited;
break;
case RAY_MIB_DES_DEF_TXRATE:
*pr->r_data = sc->sc_d.np_def_txrate;
break;
case RAY_MIB_DES_ENCRYPT:
*pr->r_data = sc->sc_d.np_encrypt;
break;
case RAY_MIB_DES_NET_TYPE:
*pr->r_data = sc->sc_d.np_net_type;
break;
case RAY_MIB_DES_SSID:
bcopy(sc->sc_d.np_ssid, pr->r_data, IEEE80211_NWID_LEN);
break;
case RAY_MIB_DES_PRIV_START:
*pr->r_data = sc->sc_d.np_priv_start;
break;
case RAY_MIB_DES_PRIV_JOIN:
*pr->r_data = sc->sc_d.np_priv_join;
break;
case RAY_MIB_CUR_AP_STATUS:
*pr->r_data = sc->sc_c.np_ap_status;
break;
case RAY_MIB_CUR_PROMISC:
*pr->r_data = sc->sc_c.np_promisc;
break;
case RAY_MIB_DES_AP_STATUS:
*pr->r_data = sc->sc_d.np_ap_status;
break;
case RAY_MIB_DES_PROMISC:
*pr->r_data = sc->sc_d.np_promisc;
break;
default:
return (EINVAL);
break;
}
pr->r_failcause = 0;
if (sc->sc_version == RAY_ECFS_BUILD_4)
pr->r_len = mib_info[pr->r_paramid][RAY_MIB_INFO_SIZ4];
else if (sc->sc_version == RAY_ECFS_BUILD_5)
pr->r_len = mib_info[pr->r_paramid][RAY_MIB_INFO_SIZ5];
return (0);
}
pr->r_failcause = 0;
ncom = 0;
com[ncom++] = RAY_COM_MALLOC(ray_repparams, RAY_COM_FWOK);
com[ncom-1]->c_pr = pr;
RAY_COM_RUNQ(sc, com, ncom, "rayrparm", error);
/* XXX no real error processing from anything yet! */
if (!com[0]->c_retval && pr->r_failcause)
error = EINVAL;
RAY_COM_FREE(com, ncom);
return (error);
}
/*
* Runq entry to read the required parameter
*
* The card and driver are happy for parameters to be read
* whenever the card is plugged in
*/
static void
ray_repparams(struct ray_softc *sc, struct ray_comq_entry *com)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
/*
* Kick the card
*/
ray_ccs_fill(sc, com->c_ccs, RAY_CMD_REPORT_PARAMS);
SRAM_WRITE_FIELD_1(sc, com->c_ccs,
ray_cmd_report, c_paramid, com->c_pr->r_paramid);
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_report, c_nparam, 1);
ray_com_ecf(sc, com);
}
/*
* Complete the parameter reporting
*/
static void
ray_repparams_done(struct ray_softc *sc, size_t ccs)
{
struct ray_comq_entry *com;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
RAY_COM_CHECK(sc, ccs);
com = TAILQ_FIRST(&sc->sc_comq);
com->c_pr->r_failcause =
SRAM_READ_FIELD_1(sc, ccs, ray_cmd_report, c_failcause);
com->c_pr->r_len =
SRAM_READ_FIELD_1(sc, ccs, ray_cmd_report, c_len);
SRAM_READ_REGION(sc, RAY_ECF_TO_HOST_BASE,
com->c_pr->r_data, com->c_pr->r_len);
ray_com_ecf_done(sc);
}
/*
* User land entry (and exit) to the error counters
*/
static int
ray_repstats_user(struct ray_softc *sc, struct ray_stats_req *sr)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
sr->rxoverflow = sc->sc_rxoverflow;
sr->rxcksum = sc->sc_rxcksum;
sr->rxhcksum = sc->sc_rxhcksum;
sr->rxnoise = sc->sc_rxnoise;
return (0);
}
/*
* User land entry to parameter update changes
*
* As a parameter change can cause the network parameters to be
* invalid we have to re-start/join.
*/
static int
ray_upparams_user(struct ray_softc *sc, struct ray_param_req *pr)
{
struct ray_comq_entry *com[3];
int error, ncom, todo;
#define RAY_UPP_SJ 0x1
#define RAY_UPP_PARAMS 0x2
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
/*
* Check that the parameter is available based on firmware version
*/
pr->r_failcause = 0;
if (pr->r_paramid > RAY_MIB_LASTUSER)
return (EINVAL);
if ((sc->sc_version == RAY_ECFS_BUILD_4) &&
!(mib_info[pr->r_paramid][0] & RAY_V4))
return (EINVAL);
if ((sc->sc_version == RAY_ECFS_BUILD_5) &&
!(mib_info[pr->r_paramid][0] & RAY_V5))
return (EINVAL);
/*
* Handle certain parameters specially
*/
todo = 0;
switch (pr->r_paramid) {
case RAY_MIB_NET_TYPE: /* Updated via START_NET JOIN_NET */
sc->sc_d.np_net_type = *pr->r_data;
todo |= RAY_UPP_SJ;
break;
case RAY_MIB_SSID: /* Updated via START_NET JOIN_NET */
bcopy(pr->r_data, sc->sc_d.np_ssid, IEEE80211_NWID_LEN);
todo |= RAY_UPP_SJ;
break;
case RAY_MIB_PRIVACY_MUST_START:/* Updated via START_NET */
if (sc->sc_c.np_net_type != RAY_MIB_NET_TYPE_ADHOC)
return (EINVAL);
sc->sc_d.np_priv_start = *pr->r_data;
todo |= RAY_UPP_SJ;
break;
case RAY_MIB_PRIVACY_CAN_JOIN: /* Updated via START_NET JOIN_NET */
sc->sc_d.np_priv_join = *pr->r_data;
todo |= RAY_UPP_SJ;
break;
case RAY_MIB_BASIC_RATE_SET:
sc->sc_d.np_def_txrate = *pr->r_data;
todo |= RAY_UPP_PARAMS;
break;
case RAY_MIB_AP_STATUS: /* Unsupported */
case RAY_MIB_MAC_ADDR: /* XXX Need interface up but could be done */
case RAY_MIB_PROMISC: /* BPF */
return (EINVAL);
break;
default:
todo |= RAY_UPP_PARAMS;
todo |= RAY_UPP_SJ;
break;
}
/*
* Generate the runq entries as needed
*/
ncom = 0;
if (todo & RAY_UPP_PARAMS) {
com[ncom++] = RAY_COM_MALLOC(ray_upparams, 0);
com[ncom-1]->c_pr = pr;
}
if (todo & RAY_UPP_SJ) {
com[ncom++] = RAY_COM_MALLOC(ray_init_sj, 0);
com[ncom++] = RAY_COM_MALLOC(ray_init_assoc, 0);
}
RAY_COM_RUNQ(sc, com, ncom, "rayuparam", error);
/* XXX no real error processing from anything yet! */
if (!com[0]->c_retval && pr->r_failcause)
error = EINVAL;
RAY_COM_FREE(com, ncom);
return (error);
}
/*
* Runq entry to update a parameter
*
* The card and driver are happy for parameters to be updated
* whenever the card is plugged in
*
* XXX the above is a little bit of a lie until _download is sorted out and we
* XXX keep local copies of things
*/
static void
ray_upparams(struct ray_softc *sc, struct ray_comq_entry *com)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
ray_ccs_fill(sc, com->c_ccs, RAY_CMD_UPDATE_PARAMS);
SRAM_WRITE_FIELD_1(sc, com->c_ccs,
ray_cmd_update, c_paramid, com->c_pr->r_paramid);
SRAM_WRITE_FIELD_1(sc, com->c_ccs, ray_cmd_update, c_nparam, 1);
SRAM_WRITE_REGION(sc, RAY_HOST_TO_ECF_BASE,
com->c_pr->r_data, com->c_pr->r_len);
ray_com_ecf(sc, com);
}
/*
* Complete the parameter update, note that promisc finishes up here too
*/
static void
ray_upparams_done(struct ray_softc *sc, size_t ccs)
{
struct ray_comq_entry *com;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_MAP_CM(sc);
RAY_COM_CHECK(sc, ccs);
com = TAILQ_FIRST(&sc->sc_comq);
switch (SRAM_READ_FIELD_1(sc, ccs, ray_cmd_update, c_paramid)) {
case RAY_MIB_PROMISC:
sc->sc_c.np_promisc = SRAM_READ_1(sc, RAY_HOST_TO_ECF_BASE);
RAY_DPRINTF(sc, RAY_DBG_IOCTL,
"promisc value %d", sc->sc_c.np_promisc);
break;
default:
com->c_pr->r_failcause =
SRAM_READ_FIELD_1(sc, ccs, ray_cmd_update, c_failcause);
break;
}
ray_com_ecf_done(sc);
}
/*
* Command queuing and execution
*/
/*
* Set up a comq entry struct
*/
static struct ray_comq_entry *
ray_com_init(struct ray_comq_entry *com, ray_comqfn_t function, int flags, char *mesg)
{
com->c_function = function;
com->c_flags = flags;
com->c_retval = 0;
com->c_ccs = NULL;
com->c_wakeup = NULL;
com->c_pr = NULL;
com->c_mesg = mesg;
return (com);
}
/*
* Malloc and set up a comq entry struct
*/
static struct ray_comq_entry *
ray_com_malloc(ray_comqfn_t function, int flags, char *mesg)
{
struct ray_comq_entry *com;
MALLOC(com, struct ray_comq_entry *,
sizeof(struct ray_comq_entry), M_RAYCOM, M_WAITOK);
return (ray_com_init(com, function, flags, mesg));
}
/*
* Add an array of commands to the runq, get some ccs's for them and
* then run, waiting on the last command.
*
* We add the commands to the queue first to preserve ioctl ordering.
*
* On recoverable errors, this routine removes the entries from the
* runq. A caller can requeue the commands (and still preserve its own
* processes ioctl ordering) but doesn't have to. When the card is
* detached we get out quickly to prevent panics and don't bother
* about the runq.
*/
static int
ray_com_runq_add(struct ray_softc *sc, struct ray_comq_entry *com[], int ncom, char *wmesg)
{
int i, error;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
error = 0;
/*
* Add the commands to the runq but don't let it run until
* the ccs's are allocated successfully
*/
com[0]->c_flags |= RAY_COM_FWAIT;
for (i = 0; i < ncom; i++) {
com[i]->c_wakeup = com[ncom-1];
RAY_DPRINTF(sc, RAY_DBG_COM, "adding %p", com[i]);
RAY_DCOM(sc, RAY_DBG_DCOM, com[i], "adding");
TAILQ_INSERT_TAIL(&sc->sc_comq, com[i], c_chain);
}
com[ncom-1]->c_flags |= RAY_COM_FWOK;
/*
* Allocate ccs's for each command.
*/
for (i = 0; i < ncom; i++) {
error = ray_ccs_alloc(sc, &com[i]->c_ccs, wmesg);
if (error == ENXIO)
return (ENXIO);
else if (error)
goto cleanup;
}
/*
* Allow the queue to run and sleep if needed.
*
* Iff the FDETACHED flag is set in the com entry we waited on
* the driver is in a zombie state! The softc structure has been
* freed by the generic bus detach methods - eek. We tread very
* carefully!
*/
com[0]->c_flags &= ~RAY_COM_FWAIT;
ray_com_runq(sc);
if (TAILQ_FIRST(&sc->sc_comq) != NULL) {
RAY_DPRINTF(sc, RAY_DBG_COM, "sleeping");
error = tsleep(com[ncom-1], PCATCH | PRIBIO, wmesg, 0);
if (com[ncom-1]->c_flags & RAY_COM_FDETACHED)
return (ENXIO);
RAY_DPRINTF(sc, RAY_DBG_COM,
"awakened, tsleep returned 0x%x", error);
} else
error = 0;
cleanup:
/*
* Only clean the queue on real errors - we don't care about it
* when we detach as the queue entries are freed by the callers.
*/
if (error && (error != ENXIO))
for (i = 0; i < ncom; i++)
if (!(com[i]->c_flags & RAY_COM_FCOMPLETED)) {
RAY_DPRINTF(sc, RAY_DBG_COM, "removing %p",
com[i]);
RAY_DCOM(sc, RAY_DBG_DCOM, com[i], "removing");
TAILQ_REMOVE(&sc->sc_comq, com[i], c_chain);
ray_ccs_free(sc, com[i]->c_ccs);
com[i]->c_ccs = NULL;
}
return (error);
}
/*
* Run the command at the head of the queue (if not already running)
*/
static void
ray_com_runq(struct ray_softc *sc)
{
struct ray_comq_entry *com;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
com = TAILQ_FIRST(&sc->sc_comq);
if ((com == NULL) ||
(com->c_flags & RAY_COM_FRUNNING) ||
(com->c_flags & RAY_COM_FWAIT) ||
(com->c_flags & RAY_COM_FDETACHED))
return;
com->c_flags |= RAY_COM_FRUNNING;
RAY_DPRINTF(sc, RAY_DBG_COM, "running %p", com);
RAY_DCOM(sc, RAY_DBG_DCOM, com, "running");
com->c_function(sc, com);
}
/*
* Remove run command, free ccs and wakeup caller.
*
* Minimal checks are done here as we ensure that the com and command
* handler were matched up earlier. Must be called at splnet or higher
* so that entries on the command queue are correctly removed.
*
* Remove the com from the comq, and wakeup the caller if it requested
* to be woken. This is used for ensuring a sequence of commands
* completes. Finally, re-run the queue.
*/
static void
ray_com_runq_done(struct ray_softc *sc)
{
struct ray_comq_entry *com;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
com = TAILQ_FIRST(&sc->sc_comq); /* XXX shall we check this as below */
RAY_DPRINTF(sc, RAY_DBG_COM, "removing %p", com);
RAY_DCOM(sc, RAY_DBG_DCOM, com, "removing");
TAILQ_REMOVE(&sc->sc_comq, com, c_chain);
com->c_flags &= ~RAY_COM_FRUNNING;
com->c_flags |= RAY_COM_FCOMPLETED;
com->c_retval = 0;
ray_ccs_free(sc, com->c_ccs);
com->c_ccs = NULL;
if (com->c_flags & RAY_COM_FWOK)
wakeup(com->c_wakeup);
ray_com_runq(sc);
/* XXX what about error on completion then? deal with when i fix
* XXX the status checking
*
* XXX all the runq_done calls from IFF_RUNNING checks in runq
* XXX routines should return EIO but shouldn't abort the runq
*/
}
/*
* Send a command to the ECF.
*/
static void
ray_com_ecf(struct ray_softc *sc, struct ray_comq_entry *com)
{
u_int i;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
RAY_MAP_CM(sc);
/*
* XXX we probably want to call a timeout on ourself here...
* XXX why isn't this processed like the TX case
*/
i = 0;
while (!RAY_ECF_READY(sc))
if (++i > 50)
RAY_PANIC(sc, "spun too long");
else if (i == 1)
RAY_RECERR(sc, "spinning");
RAY_DPRINTF(sc, RAY_DBG_COM, "sending %p", com);
RAY_DCOM(sc, RAY_DBG_DCOM, com, "sending");
SRAM_WRITE_1(sc, RAY_SCB_CCSI, RAY_CCS_INDEX(com->c_ccs));
RAY_ECF_START_CMD(sc);
if (RAY_COM_NEEDS_TIMO(
SRAM_READ_FIELD_1(sc, com->c_ccs, ray_cmd, c_cmd))) {
RAY_DPRINTF(sc, RAY_DBG_COM, "adding timeout");
sc->com_timerh = timeout(ray_com_ecf_timo, sc, RAY_COM_TIMEOUT);
}
}
/*
* Deal with commands that require a timeout to test completion.
*
* This routine is coded to only expect one outstanding request for the
* timed out requests at a time, but thats all that can be outstanding
* per hardware limitations and all that we issue anyway.
*
* We don't do any fancy testing of the command currently issued as we
* know it must be a timeout based one...unless I've got this wrong!
*/
static void
ray_com_ecf_timo(void *xsc)
{
struct ray_softc *sc = (struct ray_softc *)xsc;
struct ray_comq_entry *com;
u_int8_t cmd;
int s;
s = splnet();
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
RAY_MAP_CM(sc);
com = TAILQ_FIRST(&sc->sc_comq);
cmd = SRAM_READ_FIELD_1(sc, com->c_ccs, ray_cmd, c_cmd);
switch (SRAM_READ_FIELD_1(sc, com->c_ccs, ray_cmd, c_status)) {
case RAY_CCS_STATUS_COMPLETE:
case RAY_CCS_STATUS_FREE: /* Buggy firmware */
ray_intr_ccs(sc, cmd, com->c_ccs);
break;
case RAY_CCS_STATUS_BUSY:
sc->com_timerh = timeout(ray_com_ecf_timo, sc, RAY_COM_TIMEOUT);
break;
default: /* Replicates NetBSD */
if (sc->sc_ccsinuse[RAY_CCS_INDEX(com->c_ccs)] == 1) {
/* give a chance for the interrupt to occur */
sc->sc_ccsinuse[RAY_CCS_INDEX(com->c_ccs)] = 2;
sc->com_timerh = timeout(ray_com_ecf_timo, sc,
RAY_COM_TIMEOUT);
} else
ray_intr_ccs(sc, cmd, com->c_ccs);
break;
}
splx(s);
}
/*
* Called when interrupt handler for the command has done all it
* needs to. Will be called at splnet.
*/
static void
ray_com_ecf_done(struct ray_softc *sc)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "");
untimeout(ray_com_ecf_timo, sc, sc->com_timerh);
ray_com_runq_done(sc);
}
#if RAY_DEBUG & RAY_DBG_COM
/*
* Process completed ECF commands that probably came from the command queue
*
* This routine is called after vectoring the completed ECF command
* to the appropriate _done routine. It helps check everything is okay.
*/
static void
ray_com_ecf_check(struct ray_softc *sc, size_t ccs, char *mesg)
{
struct ray_comq_entry *com;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_COM, "%s", mesg);
com = TAILQ_FIRST(&sc->sc_comq);
if (com == NULL)
RAY_PANIC(sc, "no command queue");
if (com->c_ccs != ccs)
RAY_PANIC(sc, "ccs's don't match");
}
#endif /* RAY_DEBUG & RAY_DBG_COM */
/*
* CCS allocators
*/
/*
* Obtain a ccs for a commmand
*
* Returns 0 and in `ccsp' the bus offset of the free ccs. Will block
* awaiting free ccs if needed - if the sleep is interrupted
* EINTR/ERESTART is returned, if the card is ejected we return ENXIO.
*/
static int
ray_ccs_alloc(struct ray_softc *sc, size_t *ccsp, char *wmesg)
{
size_t ccs;
u_int i;
int error;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CCS, "");
RAY_MAP_CM(sc);
for (;;) {
for (i = RAY_CCS_CMD_FIRST; i <= RAY_CCS_CMD_LAST; i++) {
/* we probe here to make the card go */
(void)SRAM_READ_FIELD_1(sc, RAY_CCS_ADDRESS(i), ray_cmd,
c_status);
if (!sc->sc_ccsinuse[i])
break;
}
if (i > RAY_CCS_CMD_LAST) {
RAY_DPRINTF(sc, RAY_DBG_CCS, "sleeping");
error = tsleep(ray_ccs_alloc, PCATCH | PRIBIO,
wmesg, 0);
if ((sc == NULL) || (sc->gone))
return (ENXIO);
RAY_DPRINTF(sc, RAY_DBG_CCS,
"awakened, tsleep returned 0x%x", error);
if (error)
return (error);
} else
break;
}
RAY_DPRINTF(sc, RAY_DBG_CCS, "allocated 0x%02x", i);
sc->sc_ccsinuse[i] = 1;
ccs = RAY_CCS_ADDRESS(i);
*ccsp = ccs;
return (0);
}
/*
* Fill the easy bits in of a pre-allocated CCS
*/
static void
ray_ccs_fill(struct ray_softc *sc, size_t ccs, u_int cmd)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CCS, "");
RAY_MAP_CM(sc);
if (ccs == NULL)
RAY_PANIC(sc, "ccs not allocated");
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd, c_status, RAY_CCS_STATUS_BUSY);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd, c_cmd, cmd);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd, c_link, RAY_CCS_LINK_NULL);
}
/*
* Free up a ccs allocated via ray_ccs_alloc
*
* Return the old status. This routine is only used for ccs allocated via
* ray_ccs_alloc (not tx, rx or ECF command requests).
*/
static void
ray_ccs_free(struct ray_softc *sc, size_t ccs)
{
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CCS, "");
RAY_MAP_CM(sc);
#if 1 | (RAY_DEBUG & RAY_DBG_CCS)
if (!sc->sc_ccsinuse[RAY_CCS_INDEX(ccs)])
RAY_RECERR(sc, "freeing free ccs 0x%02x", RAY_CCS_INDEX(ccs));
#endif /* RAY_DEBUG & RAY_DBG_CCS */
if (!sc->gone)
RAY_CCS_FREE(sc, ccs);
sc->sc_ccsinuse[RAY_CCS_INDEX(ccs)] = 0;
RAY_DPRINTF(sc, RAY_DBG_CCS, "freed 0x%02x", RAY_CCS_INDEX(ccs));
wakeup(ray_ccs_alloc);
}
/*
* Obtain a ccs and tx buffer to transmit with and fill them in.
*
* Returns 0 and in `ccsp' the bus offset of the free ccs. Will not block
* and if none available and will returns EAGAIN.
*
* The caller must fill in the length later.
* The caller must clear the ccs on errors.
*/
static int
ray_ccs_tx(struct ray_softc *sc, size_t *ccsp, size_t *bufpp)
{
size_t ccs, bufp;
int i;
u_int8_t status;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CCS, "");
RAY_MAP_CM(sc);
i = RAY_CCS_TX_FIRST;
do {
status = SRAM_READ_FIELD_1(sc, RAY_CCS_ADDRESS(i),
ray_cmd, c_status);
if (status == RAY_CCS_STATUS_FREE)
break;
i++;
} while (i <= RAY_CCS_TX_LAST);
if (i > RAY_CCS_TX_LAST) {
return (EAGAIN);
}
RAY_DPRINTF(sc, RAY_DBG_CCS, "allocated 0x%02x", i);
/*
* Reserve and fill the ccs - must do the length later.
*
* Even though build 4 and build 5 have different fields all these
* are common apart from tx_rate. Neither the NetBSD driver or Linux
* driver bother to overwrite this for build 4 cards.
*
* The start of the buffer must be aligned to a 256 byte boundary
* (least significant byte of address = 0x00).
*/
ccs = RAY_CCS_ADDRESS(i);
bufp = RAY_TX_BASE + i * RAY_TX_BUF_SIZE;
bufp += sc->sc_tibsize;
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_status, RAY_CCS_STATUS_BUSY);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_cmd, RAY_CMD_TX_REQ);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_link, RAY_CCS_LINK_NULL);
SRAM_WRITE_FIELD_2(sc, ccs, ray_cmd_tx, c_bufp, bufp);
SRAM_WRITE_FIELD_1(sc,
ccs, ray_cmd_tx, c_tx_rate, sc->sc_c.np_def_txrate);
SRAM_WRITE_FIELD_1(sc, ccs, ray_cmd_tx, c_apm_mode, 0); /* XXX */
bufp += sizeof(struct ray_tx_phy_header);
*ccsp = ccs;
*bufpp = bufp;
return (0);
}
/*
* Routines to obtain resources for the card
*/
/*
* Allocate the attribute memory on the card
*
* A lot of this is hacking around pccardd brokeness
*/
static int
ray_res_alloc_am(struct ray_softc *sc)
{
u_long start, count, flags;
u_int32_t offset;
int error;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CM, "");
sc->am_rid = RAY_AM_RID;
start = bus_get_resource_start(sc->dev, SYS_RES_MEMORY, sc->am_rid);
count = bus_get_resource_count(sc->dev, SYS_RES_MEMORY, sc->am_rid);
error = CARD_GET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->am_rid, &flags);
if (error) {
RAY_PRINTF(sc, "CARD_GET_RES_FLAGS returned 0x%0x", error);
return (error);
}
error = CARD_GET_MEMORY_OFFSET(device_get_parent(sc->dev), sc->dev,
sc->am_rid, &offset);
if (error) {
RAY_PRINTF(sc, "CARD_GET_MEMORY_OFFSET returned 0x%0x", error);
return (error);
}
RAY_DPRINTF(sc, RAY_DBG_CM | RAY_DBG_BOOTPARAM,
"attribute start 0x%0lx count 0x%0lx flags 0x%0lx offset 0x%0x",
start, count, flags, offset);
if (start == 0x0) {
RAY_PRINTF(sc, "fixing up AM map");
}
if (count != 0x1000) {
RAY_PRINTF(sc, "fixing up AM size from 0x%lx to 0x1000",
count);
count = 0x1000;
}
sc->am_res = bus_alloc_resource(sc->dev, SYS_RES_MEMORY,
&sc->am_rid, start, ~0, count, RF_ACTIVE);
if (!sc->am_res) {
RAY_PRINTF(sc, "Cannot allocate attribute memory");
return (ENOMEM);
}
sc->am_bsh = rman_get_bushandle(sc->am_res);
sc->am_bst = rman_get_bustag(sc->am_res);
if (offset != 0) {
RAY_PRINTF(sc, "fixing up AM card address from 0x%x to 0x0",
offset);
error = CARD_SET_MEMORY_OFFSET(device_get_parent(sc->dev),
sc->dev, sc->am_rid, 0, NULL);
if (error) {
RAY_PRINTF(sc, "CARD_SET_MEMORY_OFFSET returned 0x%0x",
error);
return (error);
}
}
if (!(flags & 0x10) /* XXX MDF_ATTR */) {
RAY_PRINTF(sc, "fixing up AM flags from 0x%lx to 0x50",
flags);
error = CARD_SET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->am_rid, PCCARD_A_MEM_ATTR);
if (error) {
RAY_PRINTF(sc, "CARD_SET_RES_FLAGS returned 0x%0x",
error);
return (error);
}
}
#if RAY_DEBUG & (RAY_DBG_CM | RAY_DBG_BOOTPARAM)
CARD_GET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->am_rid, &flags);
CARD_GET_MEMORY_OFFSET(device_get_parent(sc->dev), sc->dev,
sc->cm_rid, &offset);
RAY_PRINTF(sc, "allocated attribute memory:\n"
". start 0x%0lx count 0x%0lx flags 0x%0lx offset 0x%0x",
bus_get_resource_start(sc->dev, SYS_RES_MEMORY, sc->am_rid),
bus_get_resource_count(sc->dev, SYS_RES_MEMORY, sc->am_rid),
flags, offset);
#endif /* RAY_DEBUG & (RAY_DBG_CM | RAY_DBG_BOOTPARAM) */
return (0);
}
/*
* Allocate the common memory on the card
*
* A lot of this is hacking around pccardd brokeness
*/
static int
ray_res_alloc_cm(struct ray_softc *sc)
{
u_long start, count, flags;
u_int32_t offset;
int error;
RAY_DPRINTF(sc, RAY_DBG_SUBR | RAY_DBG_CM, "");
sc->cm_rid = RAY_CM_RID;
start = bus_get_resource_start(sc->dev, SYS_RES_MEMORY, sc->cm_rid);
count = bus_get_resource_count(sc->dev, SYS_RES_MEMORY, sc->cm_rid);
error = CARD_GET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->cm_rid, &flags);
if (error) {
RAY_PRINTF(sc, "CARD_GET_RES_FLAGS returned 0x%0x", error);
return (error);
}
error = CARD_GET_MEMORY_OFFSET(device_get_parent(sc->dev), sc->dev,
sc->cm_rid, &offset);
if (error) {
RAY_PRINTF(sc, "CARD_GET_MEMORY_OFFSET returned 0x%0x", error);
return (error);
}
RAY_DPRINTF(sc, RAY_DBG_CM | RAY_DBG_BOOTPARAM,
"memory start 0x%0lx count 0x%0lx flags 0x%0lx offset 0x%0x",
start, count, flags, offset);
if (start == 0x0) {
RAY_PRINTF(sc, "fixing up CM map");
}
if (count != 0xc000) {
RAY_PRINTF(sc, "fixing up CM size from 0x%lx to 0xc000",
count);
count = 0xc000;
}
sc->cm_res = bus_alloc_resource(sc->dev, SYS_RES_MEMORY,
&sc->cm_rid, start, ~0, count, RF_ACTIVE);
if (!sc->cm_res) {
RAY_PRINTF(sc, "Cannot allocate common memory");
return (ENOMEM);
}
sc->cm_bsh = rman_get_bushandle(sc->cm_res);
sc->cm_bst = rman_get_bustag(sc->cm_res);
if (offset != 0) {
RAY_PRINTF(sc, "fixing up CM card address from 0x%x to 0x0",
offset);
error = CARD_SET_MEMORY_OFFSET(device_get_parent(sc->dev),
sc->dev, sc->cm_rid, 0, NULL);
if (error) {
RAY_PRINTF(sc, "CARD_SET_MEMORY_OFFSET returned 0x%0x",
error);
return (error);
}
}
if (flags != 0x40 /* XXX MDF_ACTIVE */) {
RAY_PRINTF(sc, "fixing up CM flags from 0x%lx to 0x40",
flags);
error = CARD_SET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->cm_rid, 2);
if (error) {
RAY_PRINTF(sc, "CARD_SET_RES_FLAGS returned 0x%0x",
error);
return (error);
}
}
#if RAY_DEBUG & (RAY_DBG_CM | RAY_DBG_BOOTPARAM)
CARD_GET_RES_FLAGS(device_get_parent(sc->dev), sc->dev,
SYS_RES_MEMORY, sc->cm_rid, &flags);
CARD_GET_MEMORY_OFFSET(device_get_parent(sc->dev), sc->dev,
sc->cm_rid, &offset);
RAY_PRINTF(sc, "allocated common memory:\n"
". start 0x%0lx count 0x%0lx flags 0x%0lx offset 0x%0x",
bus_get_resource_start(sc->dev, SYS_RES_MEMORY, sc->cm_rid),
bus_get_resource_count(sc->dev, SYS_RES_MEMORY, sc->cm_rid),
flags, offset);
#endif /* RAY_DEBUG & (RAY_DBG_CM | RAY_DBG_BOOTPARAM) */
return (0);
}
/*
* Get an irq and attach it to the bus
*/
static int
ray_res_alloc_irq(struct ray_softc *sc)
{
int error;
RAY_DPRINTF(sc, RAY_DBG_SUBR, "");
RAY_DPRINTF(sc,RAY_DBG_CM | RAY_DBG_BOOTPARAM,
"irq start 0x%0lx count 0x%0lx",
bus_get_resource_start(sc->dev, SYS_RES_IRQ, 0),
bus_get_resource_count(sc->dev, SYS_RES_IRQ, 0));
sc->irq_rid = 0;
sc->irq_res = bus_alloc_resource(sc->dev, SYS_RES_IRQ, &sc->irq_rid,
0, ~0, 1, RF_ACTIVE);
if (!sc->irq_res) {
RAY_PRINTF(sc, "Cannot allocate irq");
return (ENOMEM);
}
if ((error = bus_setup_intr(sc->dev, sc->irq_res, INTR_TYPE_NET,
ray_intr, sc, &sc->irq_handle)) != 0) {
RAY_PRINTF(sc, "Failed to setup irq");
return (error);
}
RAY_DPRINTF(sc, RAY_DBG_CM | RAY_DBG_BOOTPARAM, "allocated irq:\n"
". start 0x%0lx count 0x%0lx",
bus_get_resource_start(sc->dev, SYS_RES_IRQ, sc->irq_rid),
bus_get_resource_count(sc->dev, SYS_RES_IRQ, sc->irq_rid));
return (0);
}
/*
* Release all of the card's resources
*/
static void
ray_res_release(struct ray_softc *sc)
{
if (sc->irq_res != 0) {
bus_teardown_intr(sc->dev, sc->irq_res, sc->irq_handle);
bus_release_resource(sc->dev, SYS_RES_IRQ,
sc->irq_rid, sc->irq_res);
sc->irq_res = 0;
}
if (sc->am_res != 0) {
bus_release_resource(sc->dev, SYS_RES_MEMORY,
sc->am_rid, sc->am_res);
sc->am_res = 0;
}
if (sc->cm_res != 0) {
bus_release_resource(sc->dev, SYS_RES_MEMORY,
sc->cm_rid, sc->cm_res);
sc->cm_res = 0;
}
}
/*
* mbuf dump
*/
#if RAY_DEBUG & RAY_DBG_MBUF
static void
ray_dump_mbuf(struct ray_softc *sc, struct mbuf *m, char *s)
{
u_int8_t *d, *ed;
u_int i;
char p[17];
RAY_PRINTF(sc, "%s", s);
i = 0;
bzero(p, 17);
for (; m; m = m->m_next) {
d = mtod(m, u_int8_t *);
ed = d + m->m_len;
for (; d < ed; i++, d++) {
if ((i % 16) == 0) {
printf(" %s\n\t", p);
} else if ((i % 8) == 0)
printf(" ");
printf(" %02x", *d);
p[i % 16] = ((*d >= 0x20) && (*d < 0x80)) ? *d : '.';
}
}
if ((i - 1) % 16)
printf(" %s\n", p);
}
#endif /* RAY_DEBUG & RAY_DBG_MBUF */
Reference in New Issue View Git Blame Copy Permalink