freebsd-dev/sys/sparc64/pci/psychoreg.h
Pedro F. Giffuni 6ce70ec7f9 sys/sparc64: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:10:39 +00:00

331 lines
16 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1999 Matthew R. Green
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*-
* Copyright (c) 1998, 1999 Eduardo E. Horvath
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: NetBSD: psychoreg.h,v 1.14 2008/05/30 02:29:37 mrg Exp
*
* $FreeBSD$
*/
#ifndef _SPARC64_PCI_PSYCHOREG_H_
#define _SPARC64_PCI_PSYCHOREG_H_
/*
* Sun4u PCI definitions. Here's where we deal w/the machine
* dependencies of Psycho and the PCI controller on the UltraIIi.
*
* All PCI registers are bit-swapped, however they are not byte-swapped.
* This means that they must be accessed using little-endian access modes,
* either map the pages little-endian or use little-endian ASIs.
*
* PSYCHO implements two PCI buses, A and B.
*/
#define PSYCHO_NINTR 6
/*
* Psycho register offsets
*
* NB: FFB0 and FFB1 intr map regs also appear at 0x6000 and 0x8000
* respectively.
*/
#define PSR_UPA_PORTID 0x0000 /* UPA port ID register */
#define PSR_UPA_CONFIG 0x0008 /* UPA config register */
#define PSR_CS 0x0010 /* PSYCHO control/status register */
#define PSR_ECCC 0x0020 /* ECC control register */
#define PSR_UE_AFS 0x0030 /* Uncorrectable Error AFSR */
#define PSR_UE_AFA 0x0038 /* Uncorrectable Error AFAR */
#define PSR_CE_AFS 0x0040 /* Correctable Error AFSR */
#define PSR_CE_AFA 0x0048 /* Correctable Error AFAR */
#define PSR_PM_CTL 0x0100 /* Performance monitor control reg */
#define PSR_PM_COUNT 0x0108 /* Performance monitor counter reg */
#define PSR_IOMMU 0x0200 /* IOMMU registers */
#define PSR_PCIA0_INT_MAP 0x0c00 /* PCI bus a slot 0 irq map reg */
#define PSR_PCIA1_INT_MAP 0x0c08 /* PCI bus a slot 1 irq map reg */
#define PSR_PCIA2_INT_MAP 0x0c10 /* PCI bus a slot 2 irq map reg (IIi) */
#define PSR_PCIA3_INT_MAP 0x0c18 /* PCI bus a slot 3 irq map reg (IIi) */
#define PSR_PCIB0_INT_MAP 0x0c20 /* PCI bus b slot 0 irq map reg */
#define PSR_PCIB1_INT_MAP 0x0c28 /* PCI bus b slot 1 irq map reg */
#define PSR_PCIB2_INT_MAP 0x0c30 /* PCI bus b slot 2 irq map reg */
#define PSR_PCIB3_INT_MAP 0x0c38 /* PCI bus b slot 3 irq map reg */
#define PSR_SCSI_INT_MAP 0x1000 /* SCSI interrupt map reg */
#define PSR_ETHER_INT_MAP 0x1008 /* ethernet interrupt map reg */
#define PSR_BPP_INT_MAP 0x1010 /* parallel interrupt map reg */
#define PSR_AUDIOR_INT_MAP 0x1018 /* audio record interrupt map reg */
#define PSR_AUDIOP_INT_MAP 0x1020 /* audio playback interrupt map reg */
#define PSR_POWER_INT_MAP 0x1028 /* power fail interrupt map reg */
#define PSR_SKBDMS_INT_MAP 0x1030 /* serial/kbd/mouse interrupt map reg */
#define PSR_FD_INT_MAP 0x1038 /* floppy interrupt map reg */
#define PSR_SPARE_INT_MAP 0x1040 /* spare interrupt map reg */
#define PSR_KBD_INT_MAP 0x1048 /* kbd [unused] interrupt map reg */
#define PSR_MOUSE_INT_MAP 0x1050 /* mouse [unused] interrupt map reg */
#define PSR_SERIAL_INT_MAP 0x1058 /* second serial interrupt map reg */
#define PSR_TIMER0_INT_MAP 0x1060 /* timer 0 interrupt map reg */
#define PSR_TIMER1_INT_MAP 0x1068 /* timer 1 interrupt map reg */
#define PSR_UE_INT_MAP 0x1070 /* UE interrupt map reg */
#define PSR_CE_INT_MAP 0x1078 /* CE interrupt map reg */
#define PSR_PCIAERR_INT_MAP 0x1080 /* PCI bus a error interrupt map reg */
#define PSR_PCIBERR_INT_MAP 0x1088 /* PCI bus b error interrupt map reg */
#define PSR_PWRMGT_INT_MAP 0x1090 /* power mgmt wake interrupt map reg */
#define PSR_FFB0_INT_MAP 0x1098 /* FFB0 graphics interrupt map reg */
#define PSR_FFB1_INT_MAP 0x10a0 /* FFB1 graphics interrupt map reg */
/* Note: Clear interrupt 0 registers are not really used. */
#define PSR_PCIA0_INT_CLR 0x1400 /* PCI a slot 0 clear int regs 0..3 */
#define PSR_PCIA1_INT_CLR 0x1420 /* PCI a slot 1 clear int regs 0..3 */
#define PSR_PCIA2_INT_CLR 0x1440 /* PCI a slot 2 clear int regs 0..3 */
#define PSR_PCIA3_INT_CLR 0x1460 /* PCI a slot 3 clear int regs 0..3 */
#define PSR_PCIB0_INT_CLR 0x1480 /* PCI b slot 0 clear int regs 0..3 */
#define PSR_PCIB1_INT_CLR 0x14a0 /* PCI b slot 1 clear int regs 0..3 */
#define PSR_PCIB2_INT_CLR 0x14c0 /* PCI b slot 2 clear int regs 0..3 */
#define PSR_PCIB3_INT_CLR 0x14d0 /* PCI b slot 3 clear int regs 0..3 */
#define PSR_SCSI_INT_CLR 0x1800 /* SCSI clear int reg */
#define PSR_ETHER_INT_CLR 0x1808 /* ethernet clear int reg */
#define PSR_BPP_INT_CLR 0x1810 /* parallel clear int reg */
#define PSR_AUDIOR_INT_CLR 0x1818 /* audio record clear int reg */
#define PSR_AUDIOP_INT_CLR 0x1820 /* audio playback clear int reg */
#define PSR_POWER_INT_CLR 0x1828 /* power fail clear int reg */
#define PSR_SKBDMS_INT_CLR 0x1830 /* serial/kbd/mouse clear int reg */
#define PSR_FD_INT_CLR 0x1838 /* floppy clear int reg */
#define PSR_SPARE_INT_CLR 0x1840 /* spare clear int reg */
#define PSR_KBD_INT_CLR 0x1848 /* kbd [unused] clear int reg */
#define PSR_MOUSE_INT_CLR 0x1850 /* mouse [unused] clear int reg */
#define PSR_SERIAL_INT_CLR 0x1858 /* second serial clear int reg */
#define PSR_TIMER0_INT_CLR 0x1860 /* timer 0 clear int reg */
#define PSR_TIMER1_INT_CLR 0x1868 /* timer 1 clear int reg */
#define PSR_UE_INT_CLR 0x1870 /* UE clear int reg */
#define PSR_CE_INT_CLR 0x1878 /* CE clear int reg */
#define PSR_PCIAERR_INT_CLR 0x1880 /* PCI bus a error clear int reg */
#define PSR_PCIBERR_INT_CLR 0x1888 /* PCI bus b error clear int reg */
#define PSR_PWRMGT_INT_CLR 0x1890 /* power mgmt wake clr interrupt reg */
#define PSR_INTR_RETRY_TIM 0x1a00 /* interrupt retry timer */
#define PSR_TC0 0x1c00 /* timer/counter 0 */
#define PSR_TC1 0x1c10 /* timer/counter 1 */
#define PSR_DMA_WRITE_SYNC 0x1c20 /* PCI DMA write sync register (IIi) */
#define PSR_PCICTL0 0x2000 /* PCICTL registers for 1st Psycho */
#define PSR_PCICTL1 0x4000 /* PCICTL registers for 2nd Psycho */
#define PSR_DMA_SCB_DIAG0 0xa000 /* DMA scoreboard diag reg 0 */
#define PSR_DMA_SCB_DIAG1 0xa008 /* DMA scoreboard diag reg 1 */
#define PSR_IOMMU_SVADIAG 0xa400 /* IOMMU virtual addr diag reg */
#define PSR_IOMMU_TLB_CMP_DIAG 0xa408 /* IOMMU TLB tag compare diag reg */
#define PSR_IOMMU_QUEUE_DIAG 0xa500 /* IOMMU LRU queue diag regs 0..15 */
#define PSR_IOMMU_TLB_TAG_DIAG 0xa580 /* TLB tag diag regs 0..15 */
#define PSR_IOMMU_TLB_DATA_DIAG 0xa600 /* TLB data RAM diag regs 0..15 */
#define PSR_PCI_INT_DIAG 0xa800 /* PCI int state diag reg */
#define PSR_OBIO_INT_DIAG 0xa808 /* OBIO and misc int state diag reg */
#define PSR_STRBUF_DIAG 0xb000 /* Streaming buffer diag regs */
/*
* Here is the rest of the map, which we're not specifying:
*
* 1fe.0100.0000 - 1fe.01ff.ffff PCI configuration space
* 1fe.0100.0000 - 1fe.0100.00ff PCI B configuration header
* 1fe.0101.0000 - 1fe.0101.00ff PCI A configuration header
* 1fe.0200.0000 - 1fe.0200.ffff PCI A I/O space
* 1fe.0201.0000 - 1fe.0201.ffff PCI B I/O space
* 1ff.0000.0000 - 1ff.7fff.ffff PCI A memory space
* 1ff.8000.0000 - 1ff.ffff.ffff PCI B memory space
*
* NB: Config and I/O space can use 1-4 byte accesses, not 8 byte
* accesses. Memory space can use any sized accesses.
*
* Note that the SUNW,sabre/SUNW,simba combinations found on the
* Ultra5 and Ultra10 machines uses slightly differrent addresses
* than the above. This is mostly due to the fact that the APB is
* a multi-function PCI device with two PCI bridges, and the U2P is
* two separate PCI bridges. It uses the same PCI configuration
* space, though the configuration header for each PCI bus is
* located differently due to the SUNW,simba PCI busses being
* function 0 and function 1 of the APB, whereas the Psycho's are
* each their own PCI device. The I/O and memory spaces are each
* split into 8 equally sized areas (8x2MB blocks for I/O space,
* and 8x512MB blocks for memory space). These are allocated in to
* either PCI A or PCI B, or neither in the APB's `I/O Address Map
* Register A/B' (0xde) and `Memory Address Map Register A/B' (0xdf)
* registers of each Simba. We must ensure that both of the
* following are correct (the prom should do this for us):
*
* (PCI A Memory Address Map) & (PCI B Memory Address Map) == 0
*
* (PCI A I/O Address Map) & (PCI B I/O Address Map) == 0
*
* 1fe.0100.0000 - 1fe.01ff.ffff PCI configuration space
* 1fe.0100.0800 - 1fe.0100.08ff PCI B configuration header
* 1fe.0100.0900 - 1fe.0100.09ff PCI A configuration header
* 1fe.0200.0000 - 1fe.02ff.ffff PCI I/O space (divided)
* 1ff.0000.0000 - 1ff.ffff.ffff PCI memory space (divided)
*/
/*
* PSR_CS defines:
*
* 63 59 55 50 45 4 3 2 1 0
* +------+------+------+------+--//---+--------+-------+-----+------+
* | IMPL | VERS | MID | IGN | xxx | APCKEN | APERR | IAP | MODE |
* +------+------+------+------+--//---+--------+-------+-----+------+
*
*/
#define PSYCHO_GCSR_IMPL(csr) ((u_int)(((csr) >> 60) & 0xf))
#define PSYCHO_GCSR_VERS(csr) ((u_int)(((csr) >> 56) & 0xf))
#define PSYCHO_GCSR_MID(csr) ((u_int)(((csr) >> 51) & 0x1f))
#define PSYCHO_GCSR_IGN(csr) ((u_int)(((csr) >> 46) & 0x1f))
#define PSYCHO_CSR_APCKEN 8 /* UPA addr parity check enable */
#define PSYCHO_CSR_APERR 4 /* UPA addr parity error */
#define PSYCHO_CSR_IAP 2 /* invert UPA address parity */
#define PSYCHO_CSR_MODE 1 /* UPA/PCI handshake */
/* Offsets into the PSR_PCICTL* register block */
#define PCR_CS 0x0000 /* PCI control/status register */
#define PCR_AFS 0x0010 /* PCI AFSR register */
#define PCR_AFA 0x0018 /* PCI AFAR register */
#define PCR_DIAG 0x0020 /* PCI diagnostic register */
#define PCR_TAS 0x0028 /* PCI target address space reg (IIi) */
#define PCR_STRBUF 0x0800 /* IOMMU streaming buffer registers. */
/* INO defines */
#define PSYCHO_MAX_INO 0x3f
/* Device space defines */
#define PSYCHO_CONF_SIZE 0x1000000
#define PSYCHO_CONF_BUS_SHIFT 16
#define PSYCHO_CONF_DEV_SHIFT 11
#define PSYCHO_CONF_FUNC_SHIFT 8
#define PSYCHO_CONF_REG_SHIFT 0
#define PSYCHO_IO_SIZE 0x1000000
#define PSYCHO_MEM_SIZE 0x100000000
#define PSYCHO_CONF_OFF(bus, slot, func, reg) \
(((bus) << PSYCHO_CONF_BUS_SHIFT) | \
((slot) << PSYCHO_CONF_DEV_SHIFT) | \
((func) << PSYCHO_CONF_FUNC_SHIFT) | \
((reg) << PSYCHO_CONF_REG_SHIFT))
/* what the bits mean! */
/*
* PCI [a|b] control/status register
* Note that the Hummingbird/Sabre only has one set of PCI control/status
* registers.
*/
#define PCICTL_SBHERR 0x0000000800000000 /* strm. byte hole error; W1C */
#define PCICTL_SERR 0x0000000400000000 /* SERR asserted; W1C */
#define PCICTL_PCISPEED 0x0000000200000000 /* 0:half 1:full bus speed */
#define PCICTL_ARB_PARK 0x0000000000200000 /* PCI arbitration parking */
#define PCICTL_SBHINTEN 0x0000000000000400 /* strm. byte hole int. en. */
#define PCICTL_WAKEUPEN 0x0000000000000200 /* power mgmt. wakeup enable */
#define PCICTL_ERRINTEN 0x0000000000000100 /* PCI error interrupt enable */
#define PCICTL_ARB_4 0x000000000000000f /* DVMA arb. 4 PCI slots mask */
#define PCICTL_ARB_6 0x000000000000003f /* DVMA arb. 6 PCI slots mask */
/* The following are Hummingbird/Sabre only. */
#define PCICTL_MRLM 0x0000001000000000 /* Memory Read Line/Multiple */
#define PCICTL_CPU_PRIO 0x0000000000100000 /* CPU extra arb. prio. en. */
#define PCICTL_ARB_PRIO 0x00000000000f0000 /* PCI extra arb. prio. en. */
#define PCICTL_RTRYWAIT 0x0000000000000080 /* 0:wait 1:retry DMA write */
/* Uncorrectable error asynchronous fault status register */
#define UEAFSR_BLK (1UL << 23) /* Error caused by block transaction */
#define UEAFSR_P_DTE (1UL << 56) /* Pri. DVMA translation error */
#define UEAFSR_S_DTE (1UL << 57) /* Sec. DVMA translation error */
#define UEAFSR_S_DWR (1UL << 58) /* Sec. error during DVMA write */
#define UEAFSR_S_DRD (1UL << 59) /* Sec. error during DVMA read */
#define UEAFSR_S_PIO (1UL << 60) /* Sec. error during PIO access */
#define UEAFSR_P_DWR (1UL << 61) /* Pri. error during DVMA write */
#define UEAFSR_P_DRD (1UL << 62) /* Pri. error during DVMA read */
#define UEAFSR_P_PIO (1UL << 63) /* Pri. error during PIO access */
/* Correctable error asynchronous fault status register */
#define CEAFSR_BLK (1UL << 23) /* Error caused by block transaction */
#define CEAFSR_S_DWR (1UL << 58) /* Sec. error caused by DVMA write */
#define CEAFSR_S_DRD (1UL << 59) /* Sec. error caused by DVMA read */
#define CEAFSR_S_PIO (1UL << 60) /* Sec. error caused by PIO access */
#define CEAFSR_P_DWR (1UL << 61) /* Pri. error caused by DVMA write */
#define CEAFSR_P_DRD (1UL << 62) /* Pri. error caused by DVMA read */
#define CEAFSR_P_PIO (1UL << 63) /* Pri. error caused by PIO access */
/* PCI asynchronous fault status register */
#define PCIAFSR_P_MA (1UL << 63) /* Pri. master abort */
#define PCIAFSR_P_TA (1UL << 62) /* Pri. target abort */
#define PCIAFSR_P_RTRY (1UL << 61) /* Pri. excessive retries */
#define PCIAFSR_P_RERR (1UL << 60) /* Pri. parity error */
#define PCIAFSR_S_MA (1UL << 59) /* Sec. master abort */
#define PCIAFSR_S_TA (1UL << 58) /* Sec. target abort */
#define PCIAFSR_S_RTRY (1UL << 57) /* Sec. excessive retries */
#define PCIAFSR_S_RERR (1UL << 56) /* Sec. parity error */
#define PCIAFSR_BMASK (0xffffUL << 32)/* Bytemask of failed pri. transfer */
#define PCIAFSR_BLK (1UL << 31) /* failed pri. transfer was block r/w */
#define PCIAFSR_MID (0x3eUL << 25) /* UPA MID causing error transaction */
/* PCI diagnostic register */
#define DIAG_RTRY_DIS 0x0000000000000040 /* dis. retry limit */
#define DIAG_ISYNC_DIS 0x0000000000000020 /* dis. DMA write / int sync */
#define DIAG_DWSYNC_DIS 0x0000000000000010 /* dis. DMA write / PIO sync */
/* Definitions for the target address space register */
#define PCITAS_ADDR_SHIFT 29
/* Definitions for the Psycho configuration space */
#define PCS_DEVICE 0 /* Device number of Psycho CS entry */
#define PCS_FUNC 0 /* Function number of Psycho CS entry */
/* Non-Standard registers in the configration space */
#define PCSR_SECBUS 0x40 /* Secondary bus number register */
#define PCSR_SUBBUS 0x41 /* Subordinate bus number register */
/* Width of the physical addresses the IOMMU translates to */
#define PSYCHO_IOMMU_BITS 41
#define SABRE_IOMMU_BITS 34
#endif /* !_SPARC64_PCI_PSYCHOREG_H_ */