freebsd-dev/sys/mips/mediatek/mtk_usb_phy.c
Stanislav Galabov d478c9fe53 Add compat strings used by OpenWRT to some Mediatek/Ralink drivers
Approved by:	adrian (mentor)
Sponsored by:	Smartcom - Bulgaria AD
Differential Revision:	https://reviews.freebsd.org/D5995
2016-04-20 14:47:16 +00:00

327 lines
9.1 KiB
C

/*-
* Copyright (c) 2016 Stanislav Galabov.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/types.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <dev/fdt/fdt_common.h>
#include <dev/fdt/fdt_clock.h>
#include <mips/mediatek/fdt_reset.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <mips/mediatek/mtk_sysctl.h>
#include <mips/mediatek/mtk_soc.h>
#include <mips/mediatek/mtk_usb_phy.h>
#define RESET_ASSERT_DELAY 1000
#define RESET_DEASSERT_DELAY 10000
struct mtk_usb_phy_softc {
device_t dev;
struct resource * res;
uint32_t fm_base;
uint32_t u2_base;
uint32_t sr_coef;
uint32_t socid;
};
#define USB_PHY_READ(_sc, _off) bus_read_4((_sc)->res, (_off))
#define USB_PHY_WRITE(_sc, _off, _val) bus_write_4((_sc)->res, (_off), (_val))
#define USB_PHY_CLR_SET(_sc, _off, _clr, _set) \
USB_PHY_WRITE(_sc, _off, ((USB_PHY_READ(_sc, _off) & ~(_clr)) | (_set)))
#define USB_PHY_READ_U2(_sc, _off) \
USB_PHY_READ((_sc), ((_sc)->u2_base + (_off)))
#define USB_PHY_WRITE_U2(_sc, _off, _val) \
USB_PHY_WRITE((_sc), ((_sc)->u2_base + (_off)), (_val))
#define USB_PHY_CLR_SET_U2(_sc, _off, _clr, _set) \
USB_PHY_WRITE_U2((_sc), (_off), ((USB_PHY_READ_U2((_sc), (_off)) & \
~(_clr)) | (_set)))
#define USB_PHY_BARRIER(_sc) bus_barrier((_sc)->res, 0, 0, \
BUS_SPACE_BARRIER_WRITE | BUS_SPACE_BARRIER_READ)
#define USB_PHY_READ_FM(_sc, _off) \
USB_PHY_READ((_sc), ((_sc)->fm_base + (_off)))
#define USB_PHY_WRITE_FM(_sc, _off) \
USB_PHY_WRITE((_sc), ((_sc)->fm_base + (_off)), (_val))
#define USB_PHY_CLR_SET_FM(_sc, _off, _clr, _set) \
USB_PHY_WRITE_U2((_sc), (_off), ((USB_PHY_READ_U2((_sc), (_off)) & \
~(_clr)) | (_set)))
static void mtk_usb_phy_mt7621_init(device_t);
static void mtk_usb_phy_mt7628_init(device_t);
static struct ofw_compat_data compat_data[] = {
{ "ralink,mt7620-usbphy", MTK_SOC_MT7620A },
{ "mediatek,mt7620-usbphy", MTK_SOC_MT7620A },
{ "ralink,mt7628an-usbphy", MTK_SOC_MT7628 },
{ "ralink,rt3352-usbphy", MTK_SOC_RT3352 },
{ "ralink,rt3050-usbphy", MTK_SOC_RT3050 },
{ NULL, MTK_SOC_UNKNOWN }
};
static int
mtk_usb_phy_probe(device_t dev)
{
struct mtk_usb_phy_softc *sc = device_get_softc(dev);
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if ((sc->socid =
ofw_bus_search_compatible(dev, compat_data)->ocd_data) ==
MTK_SOC_UNKNOWN)
return (ENXIO);
device_set_desc(dev, "MTK USB PHY");
return (0);
}
static int
mtk_usb_phy_attach(device_t dev)
{
struct mtk_usb_phy_softc * sc = device_get_softc(dev);
phandle_t node;
uint32_t val;
int rid;
sc->dev = dev;
/* Get our FDT node and SoC id */
node = ofw_bus_get_node(dev);
/* Now let's see about setting USB to host or device mode */
/* XXX: is it the same for all SoCs? */
val = mtk_sysctl_get(SYSCTL_SYSCFG1);
if (OF_hasprop(node, "mtk,usb-device"))
val &= ~SYSCFG1_USB_HOST_MODE;
else
val |= SYSCFG1_USB_HOST_MODE;
mtk_sysctl_set(SYSCTL_SYSCFG1, val);
/* If we have clocks defined - enable them */
if (OF_hasprop(node, "clocks"))
fdt_clock_enable_all(dev);
/* If we have resets defined - perform a reset sequence */
if (OF_hasprop(node, "resets")) {
fdt_reset_assert_all(dev);
DELAY(RESET_ASSERT_DELAY);
fdt_reset_deassert_all(dev);
DELAY(RESET_DEASSERT_DELAY);
}
/* Careful, some devices actually require resources */
if (OF_hasprop(node, "reg")) {
rid = 0;
sc->res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (sc->res == NULL) {
device_printf(dev, "could not map memory\n");
return (ENXIO);
}
} else {
sc->res = NULL;
}
/* Some SoCs require specific USB PHY init... handle these */
switch (sc->socid) {
case MTK_SOC_MT7628: /* Fallthrough */
case MTK_SOC_MT7688:
if (sc->res == NULL)
return (ENXIO);
sc->fm_base = MT7628_FM_FEG_BASE;
sc->u2_base = MT7628_U2_BASE;
sc->sr_coef = MT7628_SR_COEF;
mtk_usb_phy_mt7628_init(dev);
break;
case MTK_SOC_MT7621:
if (sc->res == NULL)
return (ENXIO);
sc->fm_base = MT7621_FM_FEG_BASE;
sc->u2_base = MT7621_U2_BASE;
sc->sr_coef = MT7621_SR_COEF;
mtk_usb_phy_mt7621_init(dev);
break;
}
/* We no longer need the resources, release them */
if (sc->res != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->res);
return (0);
}
static int
mtk_usb_phy_detach(device_t dev)
{
struct mtk_usb_phy_softc *sc = device_get_softc(dev);
phandle_t node;
/* Get our FDT node */
node = ofw_bus_get_node(dev);
/* If we have resets defined - assert them */
if (OF_hasprop(node, "resets"))
fdt_reset_assert_all(dev);
/* If we have clocks defined - disable them */
if (OF_hasprop(node, "clocks"))
fdt_clock_disable_all(dev);
/* Finally, release resources, if any were allocated */
if (sc->res != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->res);
return (0);
}
/*
* Things currently seem to work a lot better without slew rate calibration
* both on MT7621 and MT7688, so we leave it out for now.
*/
#ifdef notyet
static void
mtk_usb_phy_slew_rate_calibration(struct mtk_usb_phy_softc *sc)
{
uint32_t val;
int i;
USB_PHY_CLR_SET_U2(sc, U2_PHY_ACR0, 0, SRCAL_EN);
USB_PHY_BARRIER(sc);
DELAY(1000);
USB_PHY_CLR_SET_FM(sc, U2_PHY_FMMONR1, 0, FRCK_EN);
USB_PHY_BARRIER(sc);
USB_PHY_CLR_SET_FM(sc, U2_PHY_FMCR0, CYCLECNT, 0x400);
USB_PHY_BARRIER(sc);
USB_PHY_CLR_SET_FM(sc, U2_PHY_FMCR0, 0, FDET_EN);
USB_PHY_BARRIER(sc);
for (i = 0; i < 1000; i++) {
if ((val = USB_PHY_READ_FM(sc, U2_PHY_FMMONR0)) != 0) {
device_printf(sc->dev, "DONE with FDET\n");
break;
}
DELAY(10000);
}
device_printf(sc->dev, "After FDET\n");
USB_PHY_CLR_SET_FM(sc, U2_PHY_FMCR0, FDET_EN, 0);
USB_PHY_BARRIER(sc);
USB_PHY_CLR_SET_FM(sc, U2_PHY_FMMONR1, FRCK_EN, 0);
USB_PHY_BARRIER(sc);
USB_PHY_CLR_SET_U2(sc, U2_PHY_ACR0, SRCAL_EN, 0);
USB_PHY_BARRIER(sc);
DELAY(1000);
if (val == 0) {
USB_PHY_CLR_SET_U2(sc, U2_PHY_ACR0, SRCTRL, 0x4 << SRCTRL_OFF);
USB_PHY_BARRIER(sc);
} else {
val = ((((1024 * 25 * sc->sr_coef) / val) + 500) / 1000) &
SRCTRL_MSK;
USB_PHY_CLR_SET_U2(sc, U2_PHY_ACR0, SRCTRL, val << SRCTRL_OFF);
USB_PHY_BARRIER(sc);
}
}
#endif
static void
mtk_usb_phy_mt7621_init(device_t dev)
{
#ifdef notyet
struct mtk_usb_phy_softc *sc = device_get_softc(dev);
/* Slew rate calibration only, but for 2 ports */
mtk_usb_phy_slew_rate_calibration(sc);
sc->u2_base = MT7621_U2_BASE_P1;
mtk_usb_phy_slew_rate_calibration(sc);
#endif
}
static void
mtk_usb_phy_mt7628_init(device_t dev)
{
struct mtk_usb_phy_softc *sc = device_get_softc(dev);
/* XXX: possibly add barriers between the next writes? */
USB_PHY_WRITE_U2(sc, U2_PHY_DCR0, 0x00ffff02);
USB_PHY_BARRIER(sc);
USB_PHY_WRITE_U2(sc, U2_PHY_DCR0, 0x00555502);
USB_PHY_BARRIER(sc);
USB_PHY_WRITE_U2(sc, U2_PHY_DCR0, 0x00aaaa02);
USB_PHY_BARRIER(sc);
USB_PHY_WRITE_U2(sc, U2_PHY_DCR0, 0x00000402);
USB_PHY_BARRIER(sc);
USB_PHY_WRITE_U2(sc, U2_PHY_AC0, 0x0048086a);
USB_PHY_BARRIER(sc);
USB_PHY_WRITE_U2(sc, U2_PHY_AC1, 0x4400001c);
USB_PHY_BARRIER(sc);
USB_PHY_WRITE_U2(sc, U2_PHY_ACR3, 0xc0200000);
USB_PHY_BARRIER(sc);
USB_PHY_WRITE_U2(sc, U2_PHY_DTM0, 0x02000000);
USB_PHY_BARRIER(sc);
#ifdef notyet
/* Slew rate calibration */
mtk_usb_phy_slew_rate_calibration(sc);
#endif
}
static device_method_t mtk_usb_phy_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, mtk_usb_phy_probe),
DEVMETHOD(device_attach, mtk_usb_phy_attach),
DEVMETHOD(device_detach, mtk_usb_phy_detach),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static driver_t mtk_usb_phy_driver = {
.name = "usbphy",
.methods = mtk_usb_phy_methods,
.size = sizeof(struct mtk_usb_phy_softc),
};
static devclass_t mtk_usb_phy_devclass;
DRIVER_MODULE(usbphy, simplebus, mtk_usb_phy_driver, mtk_usb_phy_devclass, 0,
0);