and protocol-independent host mode multicast. The code is written to accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work. This change only pertains to FreeBSD's use as a multicast end-station and does not concern multicast routing; for an IGMPv3/MLDv2 router implementation, consider the XORP project. The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6, which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html Summary * IPv4 multicast socket processing is now moved out of ip_output.c into a new module, in_mcast.c. * The in_mcast.c module implements the IPv4 legacy any-source API in terms of the protocol-independent source-specific API. * Source filters are lazy allocated as the common case does not use them. They are part of per inpcb state and are covered by the inpcb lock. * struct ip_mreqn is now supported to allow applications to specify multicast joins by interface index in the legacy IPv4 any-source API. * In UDP, an incoming multicast datagram only requires that the source port matches the 4-tuple if the socket was already bound by source port. An unbound socket SHOULD be able to receive multicasts sent from an ephemeral source port. * The UDP socket multicast filter mode defaults to exclusive, that is, sources present in the per-socket list will be blocked from delivery. * The RFC 3678 userland functions have been added to libc: setsourcefilter, getsourcefilter, setipv4sourcefilter, getipv4sourcefilter. * Definitions for IGMPv3 are merged but not yet used. * struct sockaddr_storage is now referenced from <netinet/in.h>. It is therefore defined there if not already declared in the same way as for the C99 types. * The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF which are then interpreted as interface indexes) is now deprecated. * A patch for the Rhyolite.com routed in the FreeBSD base system is available in the -net archives. This only affects individuals running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces. * Make IPv6 detach path similar to IPv4's in code flow; functionally same. * Bump __FreeBSD_version to 700048; see UPDATING. This work was financially supported by another FreeBSD committer. Obtained from: p4://bms_netdev Submitted by: Wilbert de Graaf (original work) Reviewed by: rwatson (locking), silence from fenner, net@ (but with encouragement)
855 lines
34 KiB
Plaintext
855 lines
34 KiB
Plaintext
Updating Information for FreeBSD current users
|
|
|
|
This file is maintained and copyrighted by M. Warner Losh
|
|
<imp@village.org>. See end of file for further details. For commonly
|
|
done items, please see the COMMON ITEMS: section later in the file.
|
|
|
|
Items affecting the ports and packages system can be found in
|
|
/usr/ports/UPDATING. Please read that file before running
|
|
portupgrade.
|
|
|
|
NOTE TO PEOPLE WHO THINK THAT FreeBSD 7.x IS SLOW:
|
|
FreeBSD 7.x has many debugging features turned on, in
|
|
both the kernel and userland. These features attempt to detect
|
|
incorrect use of system primitives, and encourage loud failure
|
|
through extra sanity checking and fail stop semantics. They
|
|
also substantially impact system performance. If you want to
|
|
do performance measurement, benchmarking, and optimization,
|
|
you'll want to turn them off. This includes various WITNESS-
|
|
related kernel options, INVARIANTS, malloc debugging flags
|
|
in userland, and various verbose features in the kernel. Many
|
|
developers choose to disable these features on build machines
|
|
to maximize performance.
|
|
|
|
20070612:
|
|
The IPv4 multicast socket code has been considerably modified, and
|
|
moved to the file sys/netinet/in_mcast.c. Initial support for the
|
|
RFC 3678 Source-Specific Multicast Socket API has been added to
|
|
the IPv4 network stack.
|
|
|
|
Strict multicast and broadcast reception is now the default for
|
|
UDP/IPv4 sockets; the net.inet.udp.strict_mcast_mship sysctl variable
|
|
has now been removed.
|
|
|
|
The RFC 1724 hack for interface selection has been removed; the use
|
|
of the Linux-derived ip_mreqn structure with IP_MULTICAST_IF has
|
|
been added to replace it. Consumers such as routed will soon be
|
|
updated to reflect this.
|
|
|
|
These changes affect users who are running routed(8) or rdisc(8)
|
|
from the FreeBSD base system on point-to-point or unnumbered
|
|
interfaces.
|
|
|
|
20070610:
|
|
The net80211 layer has changed significantly and all wireless
|
|
drivers that depend on it need to be recompiled. Further these
|
|
changes require that any program that interacts with the wireless
|
|
support in the kernel be recompiled; this includes: ifconfig,
|
|
wpa_supplicant, hostapd, and wlanstats. Users must also, for
|
|
the moment, kldload the wlan_scan_sta and/or wlan_scan_ap modules
|
|
if they use modules for wireless support. These modules implement
|
|
scanning support for station and ap modes, respectively. Failure
|
|
to load the appropriate module before marking a wireless interface
|
|
up will result in a message to the console and the device not
|
|
operating properly.
|
|
|
|
20070610:
|
|
The pam_nologin(8) module ceases to provide an authentication
|
|
function and starts providing an account management function.
|
|
Consequent changes to /etc/pam.d should be brought in using
|
|
mergemaster(8). Third-party files in /usr/local/etc/pam.d may
|
|
need manual editing as follows. Locate this line (or similar):
|
|
|
|
auth required pam_nologin.so no_warn
|
|
|
|
and change it according to this example:
|
|
|
|
account required pam_nologin.so no_warn
|
|
|
|
That is, the first word needs to be changed from "auth" to
|
|
"account". The new line can be moved to the account section
|
|
within the file for clarity. Not updating pam.conf(5) files
|
|
will result in nologin(5) ignored by the respective services.
|
|
|
|
20070529:
|
|
The ether_ioctl() function has been synchronized with ioctl(2)
|
|
and ifnet.if_ioctl. Due to that, the size of one of its arguments
|
|
has changed on 64-bit architectures. All kernel modules using
|
|
ether_ioctl() need to be rebuilt on such architectures.
|
|
|
|
20070516:
|
|
Improved INCLUDE_CONFIG_FILE support has been introduced to the
|
|
config(8) utility. In order to take advantage of this new
|
|
functionality, you are expected to recompile and install
|
|
src/usr.sbin/config. If you don't rebuild config(8), and your
|
|
kernel configuration depends on INCLUDE_CONFIG_FILE, the kernel
|
|
build will be broken because of a missing "kernconfstring"
|
|
symbol.
|
|
|
|
20070513:
|
|
Symbol versioning is enabled by default. To disable it, use
|
|
option WITHOUT_SYMVER. It is not advisable to attempt to
|
|
disable symbol versioning once it is enabled; your installworld
|
|
will break because a symbol version-less libc will get installed
|
|
before the install tools. As a result, the old install tools,
|
|
which previously had symbol dependencies to FBSD_1.0, will fail
|
|
because the freshly installed libc will not have them.
|
|
|
|
The default threading library has been changed to libthr. If
|
|
you wish to have libpthread as your default, use option
|
|
DEFAULT_THREAD_LIB=libpthread for the buildworld.
|
|
|
|
20070423:
|
|
The ABI breakage in sendmail(8)'s libmilter has been repaired
|
|
so it is no longer necessary to recompile mail filters (aka,
|
|
milters). If you recompiled mail filters after the 20070408
|
|
note, it is not necessary to recompile them again.
|
|
|
|
20070417:
|
|
The new trunk(4) driver has been renamed to lagg(4) as it better
|
|
reflects its purpose. ifconfig will need to be recompiled.
|
|
|
|
20070408:
|
|
sendmail(8) has been updated to version 8.14.1. Mail filters
|
|
(aka, milters) compiled against the libmilter included in the
|
|
base operating system should be recompiled.
|
|
|
|
20070302:
|
|
Firmwares for ipw(4) and iwi(4) are now included in the base tree.
|
|
In order to use them one must agree to the respective LICENSE in
|
|
share/doc/legal and define legal.intel_<name>.license_ack=1 via
|
|
loader.conf(5) or kenv(1). Make sure to deinstall the now
|
|
deprecated modules from the respective firmware ports.
|
|
|
|
20070228:
|
|
The name resolution/mapping functions addr2ascii(3) and ascii2addr(3)
|
|
were removed from FreeBSD's libc. These originally came from INRIA
|
|
IPv6. Nothing in FreeBSD ever used them. They may be regarded as
|
|
deprecated in previous releases.
|
|
The AF_LINK support for getnameinfo(3) was merged from NetBSD to
|
|
replace it as a more portable (and re-entrant) API.
|
|
|
|
20070224:
|
|
To support interrupt filtering a modification to the newbus API
|
|
has occurred, ABI was broken and __FreeBSD_version was bumped
|
|
to 700031. Please make sure that your kernel and modules are in
|
|
sync. For more info:
|
|
http://docs.freebsd.org/cgi/mid.cgi?20070221233124.GA13941
|
|
|
|
20070224:
|
|
The IPv6 multicast forwarding code may now be loaded into GENERIC
|
|
kernels by loading the ip_mroute.ko module. This is built into the
|
|
module unless WITHOUT_INET6 or WITHOUT_INET6_SUPPORT options are
|
|
set; see src.conf(5) for more information.
|
|
|
|
20070214:
|
|
The output of netstat -r has changed. Without -n, we now only
|
|
print a "network name" without the prefix length if the network
|
|
address and mask exactly match a Class A/B/C network, and an entry
|
|
exists in the nsswitch "networks" map.
|
|
With -n, we print the full unabbreviated CIDR network prefix in
|
|
the form "a.b.c.d/p". 0.0.0.0/0 is always printed as "default".
|
|
This change is in preparation for changes such as equal-cost
|
|
multipath, and to more generally assist operational deployment
|
|
of FreeBSD as a modern IPv4 router.
|
|
|
|
20070210:
|
|
PIM has been turned on by default in the IPv4 multicast
|
|
routing code. The kernel option 'PIM' has now been removed.
|
|
PIM is now built by default if option 'MROUTING' is specified.
|
|
It may now be loaded into GENERIC kernels by loading the
|
|
ip_mroute.ko module.
|
|
|
|
20070207:
|
|
Support for IPIP tunnels (VIFF_TUNNEL) in IPv4 multicast routing
|
|
has been removed. Its functionality may be achieved by explicitly
|
|
configuring gif(4) interfaces and using the 'phyint' keyword in
|
|
mrouted.conf.
|
|
XORP does not support source-routed IPv4 multicast tunnels nor the
|
|
integrated IPIP tunneling, therefore it is not affected by this
|
|
change. The __FreeBSD_version macro has been bumped to 700030.
|
|
|
|
20061221:
|
|
Support for PCI Message Signalled Interrupts has been
|
|
re-enabled in the bge driver, only for those chips which are
|
|
believed to support it properly. If there are any problems,
|
|
MSI can be disabled completely by setting the
|
|
'hw.pci.enable_msi' and 'hw.pci.enable_msix' tunables to 0
|
|
in the loader.
|
|
|
|
20061214:
|
|
Support for PCI Message Signalled Interrupts has been
|
|
disabled again in the bge driver. Many revisions of the
|
|
hardware fail to support it properly. Support can be
|
|
re-enabled by removing the #define of BGE_DISABLE_MSI in
|
|
"src/sys/dev/bge/if_bge.c".
|
|
|
|
20061214:
|
|
Support for PCI Message Signalled Interrupts has been added
|
|
to the bge driver. If there are any problems, MSI can be
|
|
disabled completely by setting the 'hw.pci.enable_msi' and
|
|
'hw.pci.enable_msix' tunables to 0 in the loader.
|
|
|
|
20061205:
|
|
The removal of several facets of the experimental Threading
|
|
system from the kernel means that the proc and thread structures
|
|
have changed quite a bit. I suggest all kernel modules that might
|
|
reference these structures be recompiled.. Especially the
|
|
linux module.
|
|
|
|
20061126:
|
|
Sound infrastructure has been updated with various fixes and
|
|
improvements. Most of the changes are pretty much transparent,
|
|
with exceptions of followings:
|
|
1) All sound driver specific sysctls (hw.snd.pcm%d.*) have been
|
|
moved to their own dev sysctl nodes, for example:
|
|
hw.snd.pcm0.vchans -> dev.pcm.0.vchans
|
|
2) /dev/dspr%d.%d has been deprecated. Each channel now has its
|
|
own chardev in the form of "dsp%d.<function>%d", where <function>
|
|
is p = playback, r = record and v = virtual, respectively. Users
|
|
are encouraged to use these devs instead of (old) "/dev/dsp%d.%d".
|
|
This does not affect those who are using "/dev/dsp".
|
|
|
|
20061122:
|
|
The following binaries have been disconnected from the build:
|
|
mount_devfs, mount_ext2fs, mount_fdescfs, mount_procfs, mount_linprocfs,
|
|
and mount_std. The functionality of these programs has been
|
|
moved into the mount program. For example, to mount a devfs
|
|
filesystem, instead of using mount_devfs, use: "mount -t devfs".
|
|
This does not affect entries in /etc/fstab, since entries in
|
|
/etc/fstab are always processed with "mount -t fstype".
|
|
|
|
20061113:
|
|
Support for PCI Message Signalled Interrupts on i386 and amd64
|
|
has been added to the kernel and various drivers will soon be
|
|
updated to use MSI when it is available. If there are any problems,
|
|
MSI can be disabled completely by setting the 'hw.pci.enable_msi'
|
|
and 'hw.pci.enable_msix' tunables to 0 in the loader.
|
|
|
|
20061110:
|
|
The MUTEX_PROFILING option has been renamed to LOCK_PROFILING.
|
|
The lockmgr object layout has been changed as a result of having
|
|
a lock_object embedded in it. As a consequence all file system
|
|
kernel modules must be re-compiled. The mutex profiling man page
|
|
has not yet been updated to reflect this change.
|
|
|
|
20061026:
|
|
KSE in the kernel has now been made optional and turned on by
|
|
default. Use 'nooption KSE' in your kernel config to turn it
|
|
off. All kernel modules *must* be recompiled after this change.
|
|
There-after, modules from a KSE kernel should be compatible with
|
|
modules from a NOKSE kernel due to the temporary padding fields
|
|
added to 'struct proc'.
|
|
|
|
20060929:
|
|
mrouted and its utilities have been removed from the base system.
|
|
|
|
20060927:
|
|
Some ioctl(2) command codes have changed. Full backward ABI
|
|
compatibility is provided if the "options COMPAT_FREEBSD6" is
|
|
present in the kernel configuration file. Make sure to add
|
|
this option to your kernel config file, or recompile X.Org
|
|
and the rest of ports; otherwise they may refuse to work.
|
|
|
|
20060924:
|
|
tcpslice has been removed from the base system.
|
|
|
|
20060913:
|
|
The sizes of struct tcpcb (and struct xtcpcb) have changed due to
|
|
the rewrite of TCP syncookies. Tools like netstat, sockstat, and
|
|
systat needs to be rebuilt.
|
|
|
|
20060903:
|
|
libpcap updated to v0.9.4 and tcpdump to v3.9.4
|
|
|
|
20060816:
|
|
The IPFIREWALL_FORWARD_EXTENDED option is gone and the behaviour
|
|
for IPFIREWALL_FORWARD is now as it was before when it was first
|
|
committed and for years after. The behaviour is now ON.
|
|
|
|
20060725:
|
|
enigma(1)/crypt(1) utility has been changed on 64 bit architectures.
|
|
Now it can decrypt files created from different architectures.
|
|
Unfortunately, it is no longer able to decrypt a cipher text
|
|
generated with an older version on 64 bit architectures.
|
|
If you have such a file, you need old utility to decrypt it.
|
|
|
|
20060709:
|
|
The interface version of the i4b kernel part has changed. So
|
|
after updating the kernel sources and compiling a new kernel,
|
|
the i4b user space tools in "/usr/src/usr.sbin/i4b" must also
|
|
be rebuilt, and vice versa.
|
|
|
|
20060627:
|
|
The XBOX kernel now defaults to the nfe(4) driver instead of
|
|
the nve(4) driver. Please update your configuration
|
|
accordingly.
|
|
|
|
20060514:
|
|
The i386-only lnc(4) driver for the AMD Am7900 LANCE and Am79C9xx
|
|
PCnet family of NICs has been removed. The new le(4) driver serves
|
|
as an equivalent but cross-platform replacement with the pcn(4)
|
|
driver still providing performance-optimized support for the subset
|
|
of AMD Am79C971 PCnet-FAST and greater chips as before.
|
|
|
|
20060511:
|
|
The machdep.* sysctls and the adjkerntz utility have been
|
|
modified a bit. The new adjkerntz utility uses the new
|
|
sysctl names and sysctlbyname() calls, so it may be impossible
|
|
to run an old /sbin/adjkerntz utility in single-user mode
|
|
with a new kernel. Replace the `adjkerntz -i' step before
|
|
`make installworld' with:
|
|
|
|
/usr/obj/usr/src/sbin/adjkerntz/adjkerntz -i
|
|
|
|
and proceed as usual with the rest of the installworld-stage
|
|
steps. Otherwise, you risk installing binaries with their
|
|
timestamp set several hours in the future, especially if
|
|
you are running with local time set to GMT+X hours.
|
|
|
|
20060412:
|
|
The ip6fw utility has been removed. The behavior provided by
|
|
ip6fw has been in ipfw2 for a good while and the rc.d scripts
|
|
have been updated to deal with it. There are some rules that
|
|
might not migrate cleanly. Use rc.firewall6 as a template to
|
|
rewrite rules.
|
|
|
|
20060428:
|
|
The puc(4) driver has been overhauled. The ebus(4) and sbus(4)
|
|
attachments have been removed. Make sure to configure scc(4)
|
|
on sparc64. Note also that by default puc(4) will use uart(4)
|
|
and not sio(4) for serial ports because interrupt handling has
|
|
been optimized for multi-port serial cards and only uart(4)
|
|
implements the interface to support it.
|
|
|
|
20060330:
|
|
The scc(4) driver replaces puc(4) for Serial Communications
|
|
Controllers (SCCs) like the Siemens SAB82532 and the Zilog
|
|
Z8530. On sparc64, it is advised to add scc(4) to the kernel
|
|
configuration to make sure that the serial ports remain
|
|
functional.
|
|
|
|
20060317:
|
|
Most world/kernel related NO_* build options changed names.
|
|
New knobs have common prefixes WITHOUT_*/WITH_* (modelled
|
|
after FreeBSD ports) and should be set in /etc/src.conf
|
|
(the src.conf(5) manpage is provided). Full backwards
|
|
compatibility is maintained for the time being though it's
|
|
highly recommended to start moving old options out of the
|
|
system-wide /etc/make.conf file into the new /etc/src.conf
|
|
while also properly renaming them. More conversions will
|
|
likely follow. Posting to current@:
|
|
|
|
http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html
|
|
|
|
20060305:
|
|
The NETSMBCRYPTO kernel option has been retired because its
|
|
functionality is always included in NETSMB and smbfs.ko now.
|
|
|
|
20060303:
|
|
The TDFX_LINUX kernel option was retired and replaced by the
|
|
tdfx_linux device. The latter can be loaded as the 3dfx_linux.ko
|
|
kernel module. Loading it alone should suffice to get 3dfx support
|
|
for Linux apps because it will pull in 3dfx.ko and linux.ko through
|
|
its dependencies.
|
|
|
|
20060204:
|
|
The 'audit' group was added to support the new auditing functionality
|
|
in the base system. Be sure to follow the directions for updating,
|
|
including the requirement to run mergemaster -p.
|
|
|
|
20060201:
|
|
The kernel ABI to file system modules was changed on i386.
|
|
Please make sure that your kernel and modules are in sync.
|
|
|
|
20060118:
|
|
This actually occured some time ago, but installing the kernel
|
|
now also installs a bunch of symbol files for the kernel modules.
|
|
This increases the size of /boot/kernel to about 67Mbytes. You
|
|
will need twice this if you will eventually back this up to kernel.old
|
|
on your next install.
|
|
If you have a shortage of room in your root partition, you should add
|
|
-DINSTALL_NODEBUG to your make arguments or add INSTALL_NODEBUG="yes"
|
|
to your /etc/make.conf.
|
|
|
|
20060113:
|
|
libc's malloc implementation has been replaced. This change has the
|
|
potential to uncover application bugs that previously went unnoticed.
|
|
See the malloc(3) manual page for more details.
|
|
|
|
20060112:
|
|
The generic netgraph(4) cookie has been changed. If you upgrade
|
|
kernel passing this point, you also need to upgrade userland
|
|
and netgraph(4) utilities like ports/net/mpd or ports/net/mpd4.
|
|
|
|
20060106:
|
|
si(4)'s device files now contain the unit number.
|
|
Uses of {cua,tty}A[0-9a-f] should be replaced by {cua,tty}A0[0-9a-f].
|
|
|
|
20060106:
|
|
The kernel ABI was mostly destroyed due to a change in the size
|
|
of struct lock_object which is nested in other structures such
|
|
as mutexes which are nested in all sorts of other structures.
|
|
Make sure your kernel and modules are in sync.
|
|
|
|
20051231:
|
|
The page coloring algorithm in the VM subsystem was converted
|
|
from tuning with kernel options to autotuning. Please remove
|
|
any PQ_* option except PQ_NOOPT from your kernel config.
|
|
|
|
20051211:
|
|
The net80211-related tools in the tools/tools/ath directory
|
|
have been moved to tools/tools/net80211 and renamed with a
|
|
"wlan" prefix. Scripts that use them should be adjusted
|
|
accordingly.
|
|
|
|
20051202:
|
|
Scripts in the local_startup directories (as defined in
|
|
/etc/defaults/rc.conf) that have the new rc.d semantics will
|
|
now be run as part of the base system rcorder. If there are
|
|
errors or problems with one of these local scripts, it could
|
|
cause boot problems. If you encounter such problems, boot in
|
|
single user mode, remove that script from the */rc.d directory.
|
|
Please report the problem to the port's maintainer, and the
|
|
freebsd-ports@freebsd.org mailing list.
|
|
|
|
20051129:
|
|
The nodev mount option was deprecated in RELENG_6 (where it
|
|
was a no-op), and is now unsupported. If you have nodev or dev listed
|
|
in /etc/fstab, remove it, otherwise it will result in a mount error.
|
|
|
|
20051129:
|
|
ABI between ipfw(4) and ipfw(8) has been changed. You need
|
|
to rebuild ipfw(8) when rebuilding kernel.
|
|
|
|
20051108:
|
|
rp(4)'s device files now contain the unit number.
|
|
Uses of {cua,tty}R[0-9a-f] should be replaced by {cua,tty}R0[0-9a-f].
|
|
|
|
20051029:
|
|
/etc/rc.d/ppp-user has been renamed to /etc/rc.d/ppp.
|
|
Its /etc/rc.conf.d configuration file has been `ppp' from
|
|
the beginning, and hence there is no need to touch it.
|
|
|
|
20051014:
|
|
Now most modules get their build-time options from the kernel
|
|
configuration file. A few modules still have fixed options
|
|
due to their non-conformant implementation, but they will be
|
|
corrected eventually. You may need to review the options of
|
|
the modules in use, explicitly specify the non-default options
|
|
in the kernel configuration file, and rebuild the kernel and
|
|
modules afterwards.
|
|
|
|
20051001:
|
|
kern.polling.enable sysctl MIB is now deprecated. Use ifconfig(8)
|
|
to turn polling(4) on your interfaces.
|
|
|
|
20050927:
|
|
The old bridge(4) implementation was retired. The new
|
|
if_bridge(4) serves as a full functional replacement.
|
|
|
|
20050722:
|
|
The ai_addrlen of a struct addrinfo was changed to a socklen_t
|
|
to conform to POSIX-2001. This change broke an ABI
|
|
compatibility on 64 bit architecture. You have to recompile
|
|
userland programs that use getaddrinfo(3) on 64 bit
|
|
architecture.
|
|
|
|
20050711:
|
|
RELENG_6 branched here.
|
|
|
|
20050629:
|
|
The pccard_ifconfig rc.conf variable has been removed and a new
|
|
variable, ifconfig_DEFAULT has been introduced. Unlike
|
|
pccard_ifconfig, ifconfig_DEFAULT applies to ALL interfaces that
|
|
do not have ifconfig_ifn entries rather than just those in
|
|
removable_interfaces.
|
|
|
|
20050616:
|
|
Some previous versions of PAM have permitted the use of
|
|
non-absolute paths in /etc/pam.conf or /etc/pam.d/* when referring
|
|
to third party PAM modules in /usr/local/lib. A change has been
|
|
made to require the use of absolute paths in order to avoid
|
|
ambiguity and dependence on library path configuration, which may
|
|
affect existing configurations.
|
|
|
|
20050610:
|
|
Major changes to network interface API. All drivers must be
|
|
recompiled. Drivers not in the base system will need to be
|
|
updated to the new APIs.
|
|
|
|
20050609:
|
|
Changes were made to kinfo_proc in sys/user.h. Please recompile
|
|
userland, or commands like `fstat', `pkill', `ps', `top' and `w'
|
|
will not behave correctly.
|
|
|
|
The API and ABI for hwpmc(4) have changed with the addition
|
|
of sampling support. Please recompile lib/libpmc(3) and
|
|
usr.sbin/{pmcstat,pmccontrol}.
|
|
|
|
20050606:
|
|
The OpenBSD dhclient was imported in place of the ISC dhclient
|
|
and the network interface configuration scripts were updated
|
|
accordingly. If you use DHCP to configure your interfaces, you
|
|
must now run devd. Also, DNS updating was lost so you will need
|
|
to find a workaround if you use this feature.
|
|
|
|
The '_dhcp' user was added to support the OpenBSD dhclient. Be
|
|
sure to run mergemaster -p (like you are supposed to do every time
|
|
anyway).
|
|
|
|
20050605:
|
|
if_bridge was added to the tree. This has changed struct ifnet.
|
|
Please recompile userland and all network related modules.
|
|
|
|
20050603:
|
|
The n_net of a struct netent was changed to an uint32_t, and
|
|
1st argument of getnetbyaddr() was changed to an uint32_t, to
|
|
conform to POSIX-2001. These changes broke an ABI
|
|
compatibility on 64 bit architecture. With these changes,
|
|
shlib major of libpcap was bumped. You have to recompile
|
|
userland programs that use getnetbyaddr(3), getnetbyname(3),
|
|
getnetent(3) and/or libpcap on 64 bit architecture.
|
|
|
|
20050528:
|
|
Kernel parsing of extra options on '#!' first lines of shell
|
|
scripts has changed. Lines with multiple options likely will
|
|
fail after this date. For full details, please see
|
|
http://people.freebsd.org/~gad/Updating-20050528.txt
|
|
|
|
20050503:
|
|
The packet filter (pf) code has been updated to OpenBSD 3.7
|
|
Please note the changed anchor syntax and the fact that
|
|
authpf(8) now needs a mounted fdescfs(5) to function.
|
|
|
|
20050415:
|
|
The NO_MIXED_MODE kernel option has been removed from the i386
|
|
amd64 platforms as its use has been superceded by the new local
|
|
APIC timer code. Any kernel config files containing this option
|
|
should be updated.
|
|
|
|
20050227:
|
|
The on-disk format of LC_CTYPE files was changed to be machine
|
|
independent. Please make sure NOT to use NO_CLEAN buildworld
|
|
when crossing this point. Crossing this point also requires
|
|
recompile or reinstall of all locale depended packages.
|
|
|
|
20050225:
|
|
The ifi_epoch member of struct if_data has been changed to
|
|
contain the uptime at which the interface was created or the
|
|
statistics zeroed rather then the wall clock time because
|
|
wallclock time may go backwards. This should have no impact
|
|
unless an snmp implementation is using this value (I know of
|
|
none at this point.)
|
|
|
|
20050224:
|
|
The acpi_perf and acpi_throttle drivers are now part of the
|
|
acpi(4) main module. They are no longer built separately.
|
|
|
|
20050223:
|
|
The layout of struct image_params has changed. You have to
|
|
recompile all compatibility modules (linux, svr4, etc) for use
|
|
with the new kernel.
|
|
|
|
20050223:
|
|
The p4tcc driver has been merged into cpufreq(4). This makes
|
|
"options CPU_ENABLE_TCC" obsolete. Please load cpufreq.ko or
|
|
compile in "device cpufreq" to restore this functionality.
|
|
|
|
20050220:
|
|
The responsibility of recomputing the file system summary of
|
|
a SoftUpdates-enabled dirty volume has been transferred to the
|
|
background fsck. A rebuild of fsck(8) utility is recommended
|
|
if you have updated the kernel.
|
|
|
|
To get the old behavior (recompute file system summary at mount
|
|
time), you can set vfs.ffs.compute_summary_at_mount=1 before
|
|
mounting the new volume.
|
|
|
|
20050206:
|
|
The cpufreq import is complete. As part of this, the sysctls for
|
|
acpi(4) throttling have been removed. The power_profile script
|
|
has been updated, so you can use performance/economy_cpu_freq in
|
|
rc.conf(5) to set AC on/offline cpu frequencies.
|
|
|
|
20050206:
|
|
NG_VERSION has been increased. Recompiling kernel (or ng_socket.ko)
|
|
requires recompiling libnetgraph and userland netgraph utilities.
|
|
|
|
20050114:
|
|
Support for abbreviated forms of a number of ipfw options is
|
|
now deprecated. Warnings are printed to stderr indicating the
|
|
correct full form when a match occurs. Some abbreviations may
|
|
be supported at a later date based on user feedback. To be
|
|
considered for support, abbreviations must be in use prior to
|
|
this commit and unlikely to be confused with current key words.
|
|
|
|
20041221:
|
|
By a popular demand, a lot of NOFOO options were renamed
|
|
to NO_FOO (see bsd.compat.mk for a full list). The old
|
|
spellings are still supported, but will cause annoying
|
|
warnings on stderr. Make sure you upgrade properly (see
|
|
the COMMON ITEMS: section later in this file).
|
|
|
|
20041219:
|
|
Auto-loading of ancillary wlan modules such as wlan_wep has
|
|
been temporarily disabled; you need to statically configure
|
|
the modules you need into your kernel or explicitly load them
|
|
prior to use. Specifically, if you intend to use WEP encryption
|
|
with an 802.11 device load/configure wlan_wep; if you want to
|
|
use WPA with the ath driver load/configure wlan_tkip, wlan_ccmp,
|
|
and wlan_xauth as required.
|
|
|
|
20041213:
|
|
The behaviour of ppp(8) has changed slightly. If lqr is enabled
|
|
(``enable lqr''), older versions would revert to LCP ECHO mode on
|
|
negotiation failure. Now, ``enable echo'' is required for this
|
|
behaviour. The ppp version number has been bumped to 3.4.2 to
|
|
reflect the change.
|
|
|
|
20041201:
|
|
The wlan support has been updated to split the crypto support
|
|
into separate modules. For static WEP you must configure the
|
|
wlan_wep module in your system or build and install the module
|
|
in place where it can be loaded (the kernel will auto-load
|
|
the module when a wep key is configured).
|
|
|
|
20041201:
|
|
The ath driver has been updated to split the tx rate control
|
|
algorithm into a separate module. You need to include either
|
|
ath_rate_onoe or ath_rate_amrr when configuring the kernel.
|
|
|
|
20041116:
|
|
Support for systems with an 80386 CPU has been removed. Please
|
|
use FreeBSD 5.x or earlier on systems with an 80386.
|
|
|
|
20041110:
|
|
We have had a hack which would mount the root filesystem
|
|
R/W if the device were named 'md*'. As part of the vnode
|
|
work I'm doing I have had to remove this hack. People
|
|
building systems which use preloaded MD root filesystems
|
|
may need to insert a "/sbin/mount -u -o rw /dev/md0 /" in
|
|
their /etc/rc scripts.
|
|
|
|
20041104:
|
|
FreeBSD 5.3 shipped here.
|
|
|
|
20041102:
|
|
The size of struct tcpcb has changed again due to the removal
|
|
of RFC1644 T/TCP. You have to recompile userland programs that
|
|
read kmem for tcp sockets directly (netstat, sockstat, etc.)
|
|
|
|
20041022:
|
|
The size of struct tcpcb has changed. You have to recompile
|
|
userland programs that read kmem for tcp sockets directly
|
|
(netstat, sockstat, etc.)
|
|
|
|
20041016:
|
|
RELENG_5 branched here. For older entries, please see updating
|
|
in the RELENG_5 branch.
|
|
|
|
COMMON ITEMS:
|
|
|
|
General Notes
|
|
-------------
|
|
Avoid using make -j when upgrading. From time to time in the
|
|
past there have been problems using -j with buildworld and/or
|
|
installworld. This is especially true when upgrading between
|
|
"distant" versions (eg one that cross a major release boundary
|
|
or several minor releases, or when several months have passed
|
|
on the -current branch).
|
|
|
|
Sometimes, obscure build problems are the result of environment
|
|
poisoning. This can happen because the make utility reads its
|
|
environment when searching for values for global variables.
|
|
To run your build attempts in an "environmental clean room",
|
|
prefix all make commands with 'env -i '. See the env(1) manual
|
|
page for more details.
|
|
|
|
When upgrading from one major version to another it is generally
|
|
best to upgrade to the latest code in the currently installed branch
|
|
first, then do an upgrade to the new branch. This is the best-tested
|
|
upgrade path, and has the highest probability of being successful.
|
|
Please try this approach before reporting problems with a major
|
|
version upgrade.
|
|
|
|
To build a kernel
|
|
-----------------
|
|
If you are updating from a prior version of FreeBSD (even one just
|
|
a few days old), you should follow this procedure. It is the most
|
|
failsafe as it uses a /usr/obj tree with a fresh mini-buildworld,
|
|
|
|
make kernel-toolchain
|
|
make -DALWAYS_CHECK_MAKE buildkernel KERNCONF=YOUR_KERNEL_HERE
|
|
make -DALWAYS_CHECK_MAKE installkernel KERNCONF=YOUR_KERNEL_HERE
|
|
|
|
To test a kernel once
|
|
---------------------
|
|
If you just want to boot a kernel once (because you are not sure
|
|
if it works, or if you want to boot a known bad kernel to provide
|
|
debugging information) run
|
|
make installkernel KERNCONF=YOUR_KERNEL_HERE KODIR=/boot/testkernel
|
|
nextboot -k testkernel
|
|
|
|
To just build a kernel when you know that it won't mess you up
|
|
--------------------------------------------------------------
|
|
This assumes you are already running a 5.X system. Replace
|
|
${arch} with the architecture of your machine (e.g. "i386",
|
|
"alpha", "amd64", "ia64", "pc98", "sparc64", etc).
|
|
|
|
cd src/sys/${arch}/conf
|
|
config KERNEL_NAME_HERE
|
|
cd ../compile/KERNEL_NAME_HERE
|
|
make depend
|
|
make
|
|
make install
|
|
|
|
If this fails, go to the "To build a kernel" section.
|
|
|
|
To rebuild everything and install it on the current system.
|
|
-----------------------------------------------------------
|
|
# Note: sometimes if you are running current you gotta do more than
|
|
# is listed here if you are upgrading from a really old current.
|
|
|
|
<make sure you have good level 0 dumps>
|
|
make buildworld
|
|
make kernel KERNCONF=YOUR_KERNEL_HERE
|
|
[1]
|
|
<reboot in single user> [3]
|
|
mergemaster -p [5]
|
|
make installworld
|
|
make delete-old
|
|
mergemaster [4]
|
|
<reboot>
|
|
|
|
|
|
To cross-install current onto a separate partition
|
|
--------------------------------------------------
|
|
# In this approach we use a separate partition to hold
|
|
# current's root, 'usr', and 'var' directories. A partition
|
|
# holding "/", "/usr" and "/var" should be about 2GB in
|
|
# size.
|
|
|
|
<make sure you have good level 0 dumps>
|
|
<boot into -stable>
|
|
make buildworld
|
|
make buildkernel KERNCONF=YOUR_KERNEL_HERE
|
|
<maybe newfs current's root partition>
|
|
<mount current's root partition on directory ${CURRENT_ROOT}>
|
|
make installworld DESTDIR=${CURRENT_ROOT}
|
|
make distribution DESTDIR=${CURRENT_ROOT} # if newfs'd
|
|
make installkernel KERNCONF=YOUR_KERNEL_HERE DESTDIR=${CURRENT_ROOT}
|
|
cp /etc/fstab ${CURRENT_ROOT}/etc/fstab # if newfs'd
|
|
<edit ${CURRENT_ROOT}/etc/fstab to mount "/" from the correct partition>
|
|
<reboot into current>
|
|
<do a "native" rebuild/install as described in the previous section>
|
|
<maybe install compatibility libraries from src/lib/compat>
|
|
<reboot>
|
|
|
|
|
|
To upgrade in-place from 5.x-stable to current
|
|
----------------------------------------------
|
|
<make sure you have good level 0 dumps>
|
|
make buildworld [9]
|
|
make kernel KERNCONF=YOUR_KERNEL_HERE [8]
|
|
[1]
|
|
<reboot in single user> [3]
|
|
mergemaster -p [5]
|
|
make installworld
|
|
make delete-old
|
|
mergemaster -i [4]
|
|
<reboot>
|
|
|
|
Make sure that you've read the UPDATING file to understand the
|
|
tweaks to various things you need. At this point in the life
|
|
cycle of current, things change often and you are on your own
|
|
to cope. The defaults can also change, so please read ALL of
|
|
the UPDATING entries.
|
|
|
|
Also, if you are tracking -current, you must be subscribed to
|
|
freebsd-current@freebsd.org. Make sure that before you update
|
|
your sources that you have read and understood all the recent
|
|
messages there. If in doubt, please track -stable which has
|
|
much fewer pitfalls.
|
|
|
|
[1] If you have third party modules, such as vmware, you
|
|
should disable them at this point so they don't crash your
|
|
system on reboot.
|
|
|
|
[3] From the bootblocks, boot -s, and then do
|
|
fsck -p
|
|
mount -u /
|
|
mount -a
|
|
cd src
|
|
adjkerntz -i # if CMOS is wall time
|
|
Also, when doing a major release upgrade, it is required that
|
|
you boot into single user mode to do the installworld.
|
|
|
|
[4] Note: This step is non-optional. Failure to do this step
|
|
can result in a significant reduction in the functionality of the
|
|
system. Attempting to do it by hand is not recommended and those
|
|
that pursue this avenue should read this file carefully, as well
|
|
as the archives of freebsd-current and freebsd-hackers mailing lists
|
|
for potential gotchas.
|
|
|
|
[5] Usually this step is a noop. However, from time to time
|
|
you may need to do this if you get unknown user in the following
|
|
step. It never hurts to do it all the time. You may need to
|
|
install a new mergemaster (cd src/usr.sbin/mergemaster && make
|
|
install) after the buildworld before this step if you last updated
|
|
from current before 20020224 or from -stable before 20020408.
|
|
|
|
[8] In order to have a kernel that can run the 4.x binaries
|
|
needed to do an installworld, you must include the COMPAT_FREEBSD4
|
|
option in your kernel. Failure to do so may leave you with a system
|
|
that is hard to boot to recover. A similar kernel option COMPAT_FREEBSD5
|
|
is required to run the 5.x binaries on more recent kernels.
|
|
|
|
Make sure that you merge any new devices from GENERIC since the
|
|
last time you updated your kernel config file.
|
|
|
|
[9] When checking out sources, you must include the -P flag to have
|
|
cvs prune empty directories.
|
|
|
|
If CPUTYPE is defined in your /etc/make.conf, make sure to use the
|
|
"?=" instead of the "=" assignment operator, so that buildworld can
|
|
override the CPUTYPE if it needs to.
|
|
|
|
MAKEOBJDIRPREFIX must be defined in an environment variable, and
|
|
not on the command line, or in /etc/make.conf. buildworld will
|
|
warn if it is improperly defined.
|
|
FORMAT:
|
|
|
|
This file contains a list, in reverse chronological order, of major
|
|
breakages in tracking -current. Not all things will be listed here,
|
|
and it only starts on October 16, 2004. Updating files can found in
|
|
previous releases if your system is older than this.
|
|
|
|
Copyright information:
|
|
|
|
Copyright 1998-2005 M. Warner Losh. All Rights Reserved.
|
|
|
|
Redistribution, publication, translation and use, with or without
|
|
modification, in full or in part, in any form or format of this
|
|
document are permitted without further permission from the author.
|
|
|
|
THIS DOCUMENT IS PROVIDED BY WARNER LOSH ``AS IS'' AND ANY EXPRESS OR
|
|
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL WARNER LOSH BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
If you find this document useful, and you want to, you may buy the
|
|
author a beer.
|
|
|
|
Contact Warner Losh if you have any questions about your use of
|
|
this document.
|
|
|
|
$FreeBSD$
|