freebsd-dev/sys/ufs/ffs/fs.h
Kirk McKusick 243a0eda9a Increase the maximum size of the journaled soft-updates journal.
The size of the journaled soft-updates journal should be big enough
to hold two minutes of filesystem metadata-update activity. The
maximum size of the soft updates journal was set in the 1990s. At
the time it was assummed that disk arrays would top out at 16 drives
and disk writes per drive would top out at 500 per second. Today's
I/O subsystems are considerably bigger and faster than those limits.
Thus this delta removes the hard upper limit and lets tunefs(8) and
newfs(8) set the upper bound based on the size of the filesystem and
its cylinder groups.

Sponsored by: The FreeBSD Foundation
2022-10-21 11:00:00 -07:00

906 lines
36 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1982, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)fs.h 8.13 (Berkeley) 3/21/95
* $FreeBSD$
*/
#ifndef _UFS_FFS_FS_H_
#define _UFS_FFS_FS_H_
#include <sys/mount.h>
#include <ufs/ufs/dinode.h>
/*
* Each disk drive contains some number of filesystems.
* A filesystem consists of a number of cylinder groups.
* Each cylinder group has inodes and data.
*
* A filesystem is described by its super-block, which in turn
* describes the cylinder groups. The super-block is critical
* data and is replicated in each cylinder group to protect against
* catastrophic loss. This is done at `newfs' time and the critical
* super-block data does not change, so the copies need not be
* referenced further unless disaster strikes.
*
* For filesystem fs, the offsets of the various blocks of interest
* are given in the super block as:
* [fs->fs_sblkno] Super-block
* [fs->fs_cblkno] Cylinder group block
* [fs->fs_iblkno] Inode blocks
* [fs->fs_dblkno] Data blocks
* The beginning of cylinder group cg in fs, is given by
* the ``cgbase(fs, cg)'' macro.
*
* Depending on the architecture and the media, the superblock may
* reside in any one of four places. For tiny media where every block
* counts, it is placed at the very front of the partition. Historically,
* UFS1 placed it 8K from the front to leave room for the disk label and
* a small bootstrap. For UFS2 it got moved to 64K from the front to leave
* room for the disk label and a bigger bootstrap, and for really piggy
* systems we check at 256K from the front if the first three fail. In
* all cases the size of the superblock will be SBLOCKSIZE. All values are
* given in byte-offset form, so they do not imply a sector size. The
* SBLOCKSEARCH specifies the order in which the locations should be searched.
*/
#define SBLOCK_FLOPPY 0
#define SBLOCK_UFS1 8192
#define SBLOCK_UFS2 65536
#define SBLOCK_PIGGY 262144
#define SBLOCKSIZE 8192
#define SBLOCKSEARCH \
{ SBLOCK_UFS2, SBLOCK_UFS1, SBLOCK_FLOPPY, SBLOCK_PIGGY, -1 }
/*
* Request standard superblock location in ffs_sbget().
*/
#define UFS_STDSB -1 /* Search standard places for superblock */
/*
* UFS_NOMSG indicates that superblock inconsistency error messages
* should not be printed. It is used by programs like fsck that
* want to print their own error message.
*
* UFS_NOCSUM causes only the superblock itself to be returned, but does
* not read in any auxiliary data structures like the cylinder group
* summary information. It is used by clients like glabel that just
* want to check for possible filesystem types. Using UFS_NOCSUM
* skips the superblock checks for csum data which allows superblocks
* that have corrupted csum data to be read and used.
*
* UFS_NOHASHFAIL will note that the check hash is wrong but will still
* return the superblock. This is used by the bootstrap code to
* give the system a chance to come up so that fsck can be run to
* correct the problem.
*
* UFS_NOWARNFAIL will warn about inconsistencies but still return the
* superblock. It includes UFS_NOHASHFAIL. UFS_NOWARNFAIL is used by
* programs like fsck_ffs(8) to debug broken filesystems.
*
* UFS_FSRONLY will only validate the superblock fields needed to
* calculate where the backup filesystem superblocks are located.
* If these values pass their validation tests, then the superblock
* is returned. This flag is used as part of the attempt to find
* alternate superblocks when using ffs_sbsearch().
*/
#define UFS_NOHASHFAIL 0x0001 /* Ignore check-hash failure */
#define UFS_NOWARNFAIL 0x0003 /* Ignore non-fatal inconsistencies */
#define UFS_NOMSG 0x0004 /* Print no error message */
#define UFS_NOCSUM 0x0008 /* Read just the superblock without csum */
#define UFS_FSRONLY 0x0010 /* Validate only values needed for recovery
of alternate superblocks */
#define UFS_ALTSBLK 0x1000 /* Flag used internally */
/*
* Max number of fragments per block. This value is NOT tweakable.
*/
#define MAXFRAG 8
/*
* Addresses stored in inodes are capable of addressing fragments
* of `blocks'. File system blocks of at most size MAXBSIZE can
* be optionally broken into 2, 4, or 8 pieces, each of which is
* addressable; these pieces may be DEV_BSIZE, or some multiple of
* a DEV_BSIZE unit.
*
* Large files consist of exclusively large data blocks. To avoid
* undue wasted disk space, the last data block of a small file may be
* allocated as only as many fragments of a large block as are
* necessary. The filesystem format retains only a single pointer
* to such a fragment, which is a piece of a single large block that
* has been divided. The size of such a fragment is determinable from
* information in the inode, using the ``blksize(fs, ip, lbn)'' macro.
*
* The filesystem records space availability at the fragment level;
* to determine block availability, aligned fragments are examined.
*/
/*
* MINBSIZE is the smallest allowable block size.
* In order to insure that it is possible to create files of size
* 2^32 with only two levels of indirection, MINBSIZE is set to 4096.
* MINBSIZE must be big enough to hold a cylinder group block,
* thus changes to (struct cg) must keep its size within MINBSIZE.
* Note that super blocks are always of size SBLOCKSIZE,
* and that both SBLOCKSIZE and MAXBSIZE must be >= MINBSIZE.
*/
#define MINBSIZE 4096
/*
* The path name on which the filesystem is mounted is maintained
* in fs_fsmnt. MAXMNTLEN defines the amount of space allocated in
* the super block for this name.
*/
#define MAXMNTLEN 468
/*
* The volume name for this filesystem is maintained in fs_volname.
* MAXVOLLEN defines the length of the buffer allocated.
*/
#define MAXVOLLEN 32
/*
* There is a 128-byte region in the superblock reserved for in-core
* pointers to summary information. Originally this included an array
* of pointers to blocks of struct csum; now there are just a few
* pointers and the remaining space is padded with fs_ocsp[].
*
* NOCSPTRS determines the size of this padding. Historically this
* space was used to store pointers to structures that summaried
* filesystem usage and layout information. However, these pointers
* left various kernel pointers in the superblock which made otherwise
* identical superblocks appear to have differences. So, all the
* pointers in the superblock were moved to a fs_summary_info structure
* reducing the superblock to having only a single pointer to this
* structure. When writing the superblock to disk, this pointer is
* temporarily NULL'ed out so that the kernel pointer will not appear
* in the on-disk copy of the superblock.
*/
#define NOCSPTRS ((128 / sizeof(void *)) - 1)
/*
* A summary of contiguous blocks of various sizes is maintained
* in each cylinder group. Normally this is set by the initial
* value of fs_maxcontig. To conserve space, a maximum summary size
* is set by FS_MAXCONTIG.
*/
#define FS_MAXCONTIG 16
/*
* MINFREE gives the minimum acceptable percentage of filesystem
* blocks which may be free. If the freelist drops below this level
* only the superuser may continue to allocate blocks. This may
* be set to 0 if no reserve of free blocks is deemed necessary,
* however throughput drops by fifty percent if the filesystem
* is run at between 95% and 100% full; thus the minimum default
* value of fs_minfree is 5%. However, to get good clustering
* performance, 10% is a better choice. hence we use 10% as our
* default value. With 10% free space, fragmentation is not a
* problem, so we choose to optimize for time.
*/
#define MINFREE 8
#define DEFAULTOPT FS_OPTTIME
/*
* Grigoriy Orlov <gluk@ptci.ru> has done some extensive work to fine
* tune the layout preferences for directories within a filesystem.
* His algorithm can be tuned by adjusting the following parameters
* which tell the system the average file size and the average number
* of files per directory. These defaults are well selected for typical
* filesystems, but may need to be tuned for odd cases like filesystems
* being used for squid caches or news spools.
*/
#define AVFILESIZ 16384 /* expected average file size */
#define AFPDIR 64 /* expected number of files per directory */
/*
* The maximum number of snapshot nodes that can be associated
* with each filesystem. This limit affects only the number of
* snapshot files that can be recorded within the superblock so
* that they can be found when the filesystem is mounted. However,
* maintaining too many will slow the filesystem performance, so
* having this limit is a good idea.
*/
#define FSMAXSNAP 20
/*
* Used to identify special blocks in snapshots:
*
* BLK_NOCOPY - A block that was unallocated at the time the snapshot
* was taken, hence does not need to be copied when written.
* BLK_SNAP - A block held by another snapshot that is not needed by this
* snapshot. When the other snapshot is freed, the BLK_SNAP entries
* are converted to BLK_NOCOPY. These are needed to allow fsck to
* identify blocks that are in use by other snapshots (which are
* expunged from this snapshot).
*/
#define BLK_NOCOPY ((ufs2_daddr_t)(1))
#define BLK_SNAP ((ufs2_daddr_t)(2))
/*
* Sysctl values for the fast filesystem.
*/
#define FFS_ADJ_REFCNT 1 /* adjust inode reference count */
#define FFS_ADJ_BLKCNT 2 /* adjust inode used block count */
#define FFS_BLK_FREE 3 /* free range of blocks in map */
#define FFS_DIR_FREE 4 /* free specified dir inodes in map */
#define FFS_FILE_FREE 5 /* free specified file inodes in map */
#define FFS_SET_FLAGS 6 /* set filesystem flags */
#define FFS_ADJ_NDIR 7 /* adjust number of directories */
#define FFS_ADJ_NBFREE 8 /* adjust number of free blocks */
#define FFS_ADJ_NIFREE 9 /* adjust number of free inodes */
#define FFS_ADJ_NFFREE 10 /* adjust number of free frags */
#define FFS_ADJ_NUMCLUSTERS 11 /* adjust number of free clusters */
#define FFS_SET_CWD 12 /* set current directory */
#define FFS_SET_DOTDOT 13 /* set inode number for ".." */
#define FFS_UNLINK 14 /* remove a name in the filesystem */
/* Was FFS_SET_INODE 15 */
/* Was FFS_SET_BUFOUTPUT 16 */
#define FFS_SET_SIZE 17 /* set inode size */
#define FFS_MAXID 17 /* number of valid ffs ids */
/*
* Command structure passed in to the filesystem to adjust filesystem values.
*/
#define FFS_CMD_VERSION 0x19790518 /* version ID */
struct fsck_cmd {
int32_t version; /* version of command structure */
int32_t handle; /* reference to filesystem to be changed */
int64_t value; /* inode or block number to be affected */
int64_t size; /* amount or range to be adjusted */
int64_t spare; /* reserved for future use */
};
/*
* A recovery structure placed at the end of the boot block area by newfs
* that can be used by fsck to search for alternate superblocks.
*/
struct fsrecovery {
int32_t fsr_magic; /* magic number */
int32_t fsr_fsbtodb; /* fsbtodb and dbtofsb shift constant */
int32_t fsr_sblkno; /* offset of super-block in filesys */
int32_t fsr_fpg; /* blocks per group * fs_frag */
u_int32_t fsr_ncg; /* number of cylinder groups */
};
/*
* Per cylinder group information; summarized in blocks allocated
* from first cylinder group data blocks. These blocks have to be
* read in from fs_csaddr (size fs_cssize) in addition to the
* super block.
*/
struct csum {
int32_t cs_ndir; /* number of directories */
int32_t cs_nbfree; /* number of free blocks */
int32_t cs_nifree; /* number of free inodes */
int32_t cs_nffree; /* number of free frags */
};
struct csum_total {
int64_t cs_ndir; /* number of directories */
int64_t cs_nbfree; /* number of free blocks */
int64_t cs_nifree; /* number of free inodes */
int64_t cs_nffree; /* number of free frags */
int64_t cs_numclusters; /* number of free clusters */
int64_t cs_spare[3]; /* future expansion */
};
/*
* Pointers to super block summary information. Placed in a separate
* structure so there is just one pointer in the superblock.
*
* The pointers in this structure are used as follows:
* fs_contigdirs references an array that tracks the creation of new
* directories
* fs_csp references a contiguous array of struct csum for
* all cylinder groups
* fs_maxcluster references an array of cluster sizes that is computed
* as cylinder groups are inspected
* fs_active is used when creating snapshots; it points to a bitmap
* of cylinder groups for which the free-block bitmap has changed
* since the snapshot operation began.
*/
struct fs_summary_info {
uint8_t *si_contigdirs; /* (u) # of contig. allocated dirs */
struct csum *si_csp; /* (u) cg summary info buffer */
int32_t *si_maxcluster; /* (u) max cluster in each cyl group */
u_int *si_active; /* (u) used by snapshots to track fs */
};
#define fs_contigdirs fs_si->si_contigdirs
#define fs_csp fs_si->si_csp
#define fs_maxcluster fs_si->si_maxcluster
#define fs_active fs_si->si_active
/*
* Super block for an FFS filesystem.
*/
struct fs {
int32_t fs_firstfield; /* historic filesystem linked list, */
int32_t fs_unused_1; /* used for incore super blocks */
int32_t fs_sblkno; /* offset of super-block in filesys */
int32_t fs_cblkno; /* offset of cyl-block in filesys */
int32_t fs_iblkno; /* offset of inode-blocks in filesys */
int32_t fs_dblkno; /* offset of first data after cg */
int32_t fs_old_cgoffset; /* cylinder group offset in cylinder */
int32_t fs_old_cgmask; /* used to calc mod fs_ntrak */
int32_t fs_old_time; /* last time written */
int32_t fs_old_size; /* number of blocks in fs */
int32_t fs_old_dsize; /* number of data blocks in fs */
u_int32_t fs_ncg; /* number of cylinder groups */
int32_t fs_bsize; /* size of basic blocks in fs */
int32_t fs_fsize; /* size of frag blocks in fs */
int32_t fs_frag; /* number of frags in a block in fs */
/* these are configuration parameters */
int32_t fs_minfree; /* minimum percentage of free blocks */
int32_t fs_old_rotdelay; /* num of ms for optimal next block */
int32_t fs_old_rps; /* disk revolutions per second */
/* these fields can be computed from the others */
int32_t fs_bmask; /* ``blkoff'' calc of blk offsets */
int32_t fs_fmask; /* ``fragoff'' calc of frag offsets */
int32_t fs_bshift; /* ``lblkno'' calc of logical blkno */
int32_t fs_fshift; /* ``numfrags'' calc number of frags */
/* these are configuration parameters */
int32_t fs_maxcontig; /* max number of contiguous blks */
int32_t fs_maxbpg; /* max number of blks per cyl group */
/* these fields can be computed from the others */
int32_t fs_fragshift; /* block to frag shift */
int32_t fs_fsbtodb; /* fsbtodb and dbtofsb shift constant */
int32_t fs_sbsize; /* actual size of super block */
int32_t fs_spare1[2]; /* old fs_csmask */
/* old fs_csshift */
int32_t fs_nindir; /* value of NINDIR */
u_int32_t fs_inopb; /* value of INOPB */
int32_t fs_old_nspf; /* value of NSPF */
/* yet another configuration parameter */
int32_t fs_optim; /* optimization preference, see below */
int32_t fs_old_npsect; /* # sectors/track including spares */
int32_t fs_old_interleave; /* hardware sector interleave */
int32_t fs_old_trackskew; /* sector 0 skew, per track */
int32_t fs_id[2]; /* unique filesystem id */
/* sizes determined by number of cylinder groups and their sizes */
int32_t fs_old_csaddr; /* blk addr of cyl grp summary area */
int32_t fs_cssize; /* size of cyl grp summary area */
int32_t fs_cgsize; /* cylinder group size */
int32_t fs_spare2; /* old fs_ntrak */
int32_t fs_old_nsect; /* sectors per track */
int32_t fs_old_spc; /* sectors per cylinder */
int32_t fs_old_ncyl; /* cylinders in filesystem */
int32_t fs_old_cpg; /* cylinders per group */
u_int32_t fs_ipg; /* inodes per group */
int32_t fs_fpg; /* blocks per group * fs_frag */
/* this data must be re-computed after crashes */
struct csum fs_old_cstotal; /* cylinder summary information */
/* these fields are cleared at mount time */
int8_t fs_fmod; /* super block modified flag */
int8_t fs_clean; /* filesystem is clean flag */
int8_t fs_ronly; /* mounted read-only flag */
int8_t fs_old_flags; /* old FS_ flags */
u_char fs_fsmnt[MAXMNTLEN]; /* name mounted on */
u_char fs_volname[MAXVOLLEN]; /* volume name */
u_int64_t fs_swuid; /* system-wide uid */
int32_t fs_pad; /* due to alignment of fs_swuid */
/* these fields retain the current block allocation info */
int32_t fs_cgrotor; /* last cg searched */
void *fs_ocsp[NOCSPTRS]; /* padding; was list of fs_cs buffers */
struct fs_summary_info *fs_si;/* In-core pointer to summary info */
int32_t fs_old_cpc; /* cyl per cycle in postbl */
int32_t fs_maxbsize; /* maximum blocking factor permitted */
int64_t fs_unrefs; /* number of unreferenced inodes */
int64_t fs_providersize; /* size of underlying GEOM provider */
int64_t fs_metaspace; /* size of area reserved for metadata */
int64_t fs_sparecon64[13]; /* old rotation block list head */
int64_t fs_sblockactualloc; /* byte offset of this superblock */
int64_t fs_sblockloc; /* byte offset of standard superblock */
struct csum_total fs_cstotal; /* (u) cylinder summary information */
ufs_time_t fs_time; /* last time written */
int64_t fs_size; /* number of blocks in fs */
int64_t fs_dsize; /* number of data blocks in fs */
ufs2_daddr_t fs_csaddr; /* blk addr of cyl grp summary area */
int64_t fs_pendingblocks; /* (u) blocks being freed */
u_int32_t fs_pendinginodes; /* (u) inodes being freed */
uint32_t fs_snapinum[FSMAXSNAP];/* list of snapshot inode numbers */
u_int32_t fs_avgfilesize; /* expected average file size */
u_int32_t fs_avgfpdir; /* expected # of files per directory */
int32_t fs_save_cgsize; /* save real cg size to use fs_bsize */
ufs_time_t fs_mtime; /* Last mount or fsck time. */
int32_t fs_sujfree; /* SUJ free list */
int32_t fs_sparecon32[21]; /* reserved for future constants */
u_int32_t fs_ckhash; /* if CK_SUPERBLOCK, its check-hash */
u_int32_t fs_metackhash; /* metadata check-hash, see CK_ below */
int32_t fs_flags; /* see FS_ flags below */
int32_t fs_contigsumsize; /* size of cluster summary array */
int32_t fs_maxsymlinklen; /* max length of an internal symlink */
int32_t fs_old_inodefmt; /* format of on-disk inodes */
u_int64_t fs_maxfilesize; /* maximum representable file size */
int64_t fs_qbmask; /* ~fs_bmask for use with 64-bit size */
int64_t fs_qfmask; /* ~fs_fmask for use with 64-bit size */
int32_t fs_state; /* validate fs_clean field */
int32_t fs_old_postblformat; /* format of positional layout tables */
int32_t fs_old_nrpos; /* number of rotational positions */
int32_t fs_spare5[2]; /* old fs_postbloff */
/* old fs_rotbloff */
int32_t fs_magic; /* magic number */
};
/* Sanity checking. */
#ifdef CTASSERT
CTASSERT(sizeof(struct fs) == 1376);
#endif
/*
* Filesystem identification
*/
#define FS_UFS1_MAGIC 0x011954 /* UFS1 fast filesystem magic number */
#define FS_UFS2_MAGIC 0x19540119 /* UFS2 fast filesystem magic number */
#define FS_BAD_MAGIC 0x19960408 /* UFS incomplete newfs magic number */
#define FS_42INODEFMT -1 /* 4.2BSD inode format */
#define FS_44INODEFMT 2 /* 4.4BSD inode format */
/*
* Preference for optimization.
*/
#define FS_OPTTIME 0 /* minimize allocation time */
#define FS_OPTSPACE 1 /* minimize disk fragmentation */
/*
* Filesystem flags.
*
* The FS_UNCLEAN flag is set by the kernel when the filesystem was
* mounted with fs_clean set to zero. The FS_DOSOFTDEP flag indicates
* that the filesystem should be managed by the soft updates code.
* Note that the FS_NEEDSFSCK flag is set and cleared by the fsck
* utility. It is set when background fsck finds an unexpected
* inconsistency which requires a traditional foreground fsck to be
* run. Such inconsistencies should only be found after an uncorrectable
* disk error. The FS_NEEDSFSCK can also be set when a mounted filesystem
* discovers an internal inconsistency such as freeing a freed inode.
* A foreground fsck will clear the FS_NEEDSFSCK flag when it has
* successfully cleaned up the filesystem. The kernel uses this
* flag to enforce that inconsistent filesystems be mounted read-only.
*
* The FS_METACKHASH flag when set indicates that the kernel maintains
* one or more check hashes. The actual set of supported check hashes
* is stored in the fs_metackhash field. Kernels that do not support
* check hashes clear the FS_METACKHASH flag to indicate that the
* check hashes need to be rebuilt (by fsck) before they can be used.
*
* When a filesystem is mounted, any flags not included in FS_SUPPORTED
* are cleared. This lets newer features know that the filesystem has
* been run on an older version of the filesystem and thus that data
* structures associated with those features are out-of-date and need
* to be rebuilt.
*
* FS_ACLS indicates that POSIX.1e ACLs are administratively enabled
* for the file system, so they should be loaded from extended attributes,
* observed for access control purposes, and be administered by object
* owners. FS_NFS4ACLS indicates that NFSv4 ACLs are administratively
* enabled. This flag is mutually exclusive with FS_ACLS. FS_MULTILABEL
* indicates that the TrustedBSD MAC Framework should attempt to back MAC
* labels into extended attributes on the file system rather than maintain
* a single mount label for all objects.
*/
#define FS_UNCLEAN 0x00000001 /* filesystem not clean at mount */
#define FS_DOSOFTDEP 0x00000002 /* filesystem using soft dependencies */
#define FS_NEEDSFSCK 0x00000004 /* filesystem needs sync fsck before mount */
#define FS_SUJ 0x00000008 /* Filesystem using softupdate journal */
#define FS_ACLS 0x00000010 /* file system has POSIX.1e ACLs enabled */
#define FS_MULTILABEL 0x00000020 /* file system is MAC multi-label */
#define FS_GJOURNAL 0x00000040 /* gjournaled file system */
#define FS_FLAGS_UPDATED 0x0000080 /* flags have been moved to new location */
#define FS_NFS4ACLS 0x00000100 /* file system has NFSv4 ACLs enabled */
#define FS_METACKHASH 0x00000200 /* kernel supports metadata check hashes */
#define FS_TRIM 0x00000400 /* issue BIO_DELETE for deleted blocks */
#define FS_SUPPORTED 0x00FFFFFF /* supported flags, others cleared at mount*/
/*
* Things that we may someday support, but currently do not.
* These flags are all cleared so we know if we ran on a kernel
* that does not support them.
*/
#define FS_INDEXDIRS 0x01000000 /* kernel supports indexed directories */
#define FS_VARBLKSIZE 0x02000000 /* kernel supports variable block sizes */
#define FS_COOLOPT1 0x04000000 /* kernel supports cool option 1 */
#define FS_COOLOPT2 0x08000000 /* kernel supports cool option 2 */
#define FS_COOLOPT3 0x10000000 /* kernel supports cool option 3 */
#define FS_COOLOPT4 0x20000000 /* kernel supports cool option 4 */
#define FS_COOLOPT5 0x40000000 /* kernel supports cool option 5 */
#define FS_COOLOPT6 0x80000000 /* kernel supports cool option 6 */
/*
* The fs_metackhash field indicates the types of metadata check-hash
* that are maintained for a filesystem. Not all filesystems check-hash
* all metadata.
*/
#define CK_SUPERBLOCK 0x0001 /* the superblock */
#define CK_CYLGRP 0x0002 /* the cylinder groups */
#define CK_INODE 0x0004 /* inodes */
#define CK_INDIR 0x0008 /* indirect blocks */
#define CK_DIR 0x0010 /* directory contents */
#define CK_SUPPORTED 0x0007 /* supported flags, others cleared at mount */
/*
* The BX_FSPRIV buffer b_xflags are used to track types of data in buffers.
*/
#define BX_SUPERBLOCK 0x00010000 /* superblock */
#define BX_CYLGRP 0x00020000 /* cylinder groups */
#define BX_INODE 0x00040000 /* inodes */
#define BX_INDIR 0x00080000 /* indirect blocks */
#define BX_DIR 0x00100000 /* directory contents */
#define PRINT_UFS_BUF_XFLAGS "\20\25dir\24indir\23inode\22cylgrp\21superblock"
/*
* Macros to access bits in the fs_active array.
*/
#define ACTIVECGNUM(fs, cg) ((fs)->fs_active[(cg) / (NBBY * sizeof(int))])
#define ACTIVECGOFF(cg) (1 << ((cg) % (NBBY * sizeof(int))))
#define ACTIVESET(fs, cg) do { \
if ((fs)->fs_active) \
ACTIVECGNUM((fs), (cg)) |= ACTIVECGOFF((cg)); \
} while (0)
#define ACTIVECLEAR(fs, cg) do { \
if ((fs)->fs_active) \
ACTIVECGNUM((fs), (cg)) &= ~ACTIVECGOFF((cg)); \
} while (0)
/*
* The size of a cylinder group is calculated by CGSIZE. The maximum size
* is limited by the fact that cylinder groups are at most one block.
* Its size is derived from the size of the maps maintained in the
* cylinder group and the (struct cg) size.
*/
#define CGSIZE(fs) \
/* base cg */ (sizeof(struct cg) + sizeof(int32_t) + \
/* old btotoff */ (fs)->fs_old_cpg * sizeof(int32_t) + \
/* old boff */ (fs)->fs_old_cpg * sizeof(u_int16_t) + \
/* inode map */ howmany((fs)->fs_ipg, NBBY) + \
/* block map */ howmany((fs)->fs_fpg, NBBY) +\
/* if present */ ((fs)->fs_contigsumsize <= 0 ? 0 : \
/* cluster sum */ (fs)->fs_contigsumsize * sizeof(int32_t) + \
/* cluster map */ howmany(fragstoblks(fs, (fs)->fs_fpg), NBBY)))
/*
* The minimal number of cylinder groups that should be created.
*/
#define MINCYLGRPS 4
/*
* Convert cylinder group to base address of its global summary info.
*/
#define fs_cs(fs, indx) fs_csp[indx]
/*
* Cylinder group block for a filesystem.
*/
#define CG_MAGIC 0x090255
struct cg {
int32_t cg_firstfield; /* historic cyl groups linked list */
int32_t cg_magic; /* magic number */
int32_t cg_old_time; /* time last written */
u_int32_t cg_cgx; /* we are the cgx'th cylinder group */
int16_t cg_old_ncyl; /* number of cyl's this cg */
int16_t cg_old_niblk; /* number of inode blocks this cg */
u_int32_t cg_ndblk; /* number of data blocks this cg */
struct csum cg_cs; /* cylinder summary information */
u_int32_t cg_rotor; /* position of last used block */
u_int32_t cg_frotor; /* position of last used frag */
u_int32_t cg_irotor; /* position of last used inode */
u_int32_t cg_frsum[MAXFRAG]; /* counts of available frags */
int32_t cg_old_btotoff; /* (int32) block totals per cylinder */
int32_t cg_old_boff; /* (u_int16) free block positions */
u_int32_t cg_iusedoff; /* (u_int8) used inode map */
u_int32_t cg_freeoff; /* (u_int8) free block map */
u_int32_t cg_nextfreeoff; /* (u_int8) next available space */
u_int32_t cg_clustersumoff; /* (u_int32) counts of avail clusters */
u_int32_t cg_clusteroff; /* (u_int8) free cluster map */
u_int32_t cg_nclusterblks; /* number of clusters this cg */
u_int32_t cg_niblk; /* number of inode blocks this cg */
u_int32_t cg_initediblk; /* last initialized inode */
u_int32_t cg_unrefs; /* number of unreferenced inodes */
int32_t cg_sparecon32[1]; /* reserved for future use */
u_int32_t cg_ckhash; /* check-hash of this cg */
ufs_time_t cg_time; /* time last written */
int64_t cg_sparecon64[3]; /* reserved for future use */
u_int8_t cg_space[1]; /* space for cylinder group maps */
/* actually longer */
};
/*
* Macros for access to cylinder group array structures
*/
#define cg_chkmagic(cgp) ((cgp)->cg_magic == CG_MAGIC)
#define cg_inosused(cgp) \
((u_int8_t *)((u_int8_t *)(cgp) + (cgp)->cg_iusedoff))
#define cg_blksfree(cgp) \
((u_int8_t *)((u_int8_t *)(cgp) + (cgp)->cg_freeoff))
#define cg_clustersfree(cgp) \
((u_int8_t *)((u_int8_t *)(cgp) + (cgp)->cg_clusteroff))
#define cg_clustersum(cgp) \
((int32_t *)((uintptr_t)(cgp) + (cgp)->cg_clustersumoff))
/*
* Turn filesystem block numbers into disk block addresses.
* This maps filesystem blocks to device size blocks.
*/
#define fsbtodb(fs, b) ((daddr_t)(b) << (fs)->fs_fsbtodb)
#define dbtofsb(fs, b) ((b) >> (fs)->fs_fsbtodb)
/*
* Cylinder group macros to locate things in cylinder groups.
* They calc filesystem addresses of cylinder group data structures.
*/
#define cgbase(fs, c) (((ufs2_daddr_t)(fs)->fs_fpg) * (c))
#define cgdata(fs, c) (cgdmin(fs, c) + (fs)->fs_metaspace) /* data zone */
#define cgmeta(fs, c) (cgdmin(fs, c)) /* meta data */
#define cgdmin(fs, c) (cgstart(fs, c) + (fs)->fs_dblkno) /* 1st data */
#define cgimin(fs, c) (cgstart(fs, c) + (fs)->fs_iblkno) /* inode blk */
#define cgsblock(fs, c) (cgstart(fs, c) + (fs)->fs_sblkno) /* super blk */
#define cgtod(fs, c) (cgstart(fs, c) + (fs)->fs_cblkno) /* cg block */
#define cgstart(fs, c) \
((fs)->fs_magic == FS_UFS2_MAGIC ? cgbase(fs, c) : \
(cgbase(fs, c) + (fs)->fs_old_cgoffset * ((c) & ~((fs)->fs_old_cgmask))))
/*
* Macros for handling inode numbers:
* inode number to filesystem block offset.
* inode number to cylinder group number.
* inode number to filesystem block address.
*/
#define ino_to_cg(fs, x) (((ino_t)(x)) / (fs)->fs_ipg)
#define ino_to_fsba(fs, x) \
((ufs2_daddr_t)(cgimin(fs, ino_to_cg(fs, (ino_t)(x))) + \
(blkstofrags((fs), ((((ino_t)(x)) % (fs)->fs_ipg) / INOPB(fs))))))
#define ino_to_fsbo(fs, x) (((ino_t)(x)) % INOPB(fs))
/*
* Give cylinder group number for a filesystem block.
* Give cylinder group block number for a filesystem block.
*/
#define dtog(fs, d) ((d) / (fs)->fs_fpg)
#define dtogd(fs, d) ((d) % (fs)->fs_fpg)
/*
* Extract the bits for a block from a map.
* Compute the cylinder and rotational position of a cyl block addr.
*/
#define blkmap(fs, map, loc) \
(((map)[(loc) / NBBY] >> ((loc) % NBBY)) & (0xff >> (NBBY - (fs)->fs_frag)))
/*
* The following macros optimize certain frequently calculated
* quantities by using shifts and masks in place of divisions
* modulos and multiplications.
*/
#define blkoff(fs, loc) /* calculates (loc % fs->fs_bsize) */ \
((loc) & (fs)->fs_qbmask)
#define fragoff(fs, loc) /* calculates (loc % fs->fs_fsize) */ \
((loc) & (fs)->fs_qfmask)
#define lfragtosize(fs, frag) /* calculates ((off_t)frag * fs->fs_fsize) */ \
(((off_t)(frag)) << (fs)->fs_fshift)
#define lblktosize(fs, blk) /* calculates ((off_t)blk * fs->fs_bsize) */ \
(((off_t)(blk)) << (fs)->fs_bshift)
/* Use this only when `blk' is known to be small, e.g., < UFS_NDADDR. */
#define smalllblktosize(fs, blk) /* calculates (blk * fs->fs_bsize) */ \
((blk) << (fs)->fs_bshift)
#define lblkno(fs, loc) /* calculates (loc / fs->fs_bsize) */ \
((loc) >> (fs)->fs_bshift)
#define numfrags(fs, loc) /* calculates (loc / fs->fs_fsize) */ \
((loc) >> (fs)->fs_fshift)
#define blkroundup(fs, size) /* calculates roundup(size, fs->fs_bsize) */ \
(((size) + (fs)->fs_qbmask) & (fs)->fs_bmask)
#define fragroundup(fs, size) /* calculates roundup(size, fs->fs_fsize) */ \
(((size) + (fs)->fs_qfmask) & (fs)->fs_fmask)
#define fragstoblks(fs, frags) /* calculates (frags / fs->fs_frag) */ \
((frags) >> (fs)->fs_fragshift)
#define blkstofrags(fs, blks) /* calculates (blks * fs->fs_frag) */ \
((blks) << (fs)->fs_fragshift)
#define fragnum(fs, fsb) /* calculates (fsb % fs->fs_frag) */ \
((fsb) & ((fs)->fs_frag - 1))
#define blknum(fs, fsb) /* calculates rounddown(fsb, fs->fs_frag) */ \
((fsb) &~ ((fs)->fs_frag - 1))
/*
* Determine the number of available frags given a
* percentage to hold in reserve.
*/
#define freespace(fs, percentreserved) \
(blkstofrags((fs), (fs)->fs_cstotal.cs_nbfree) + \
(fs)->fs_cstotal.cs_nffree - \
(((off_t)((fs)->fs_dsize)) * (percentreserved) / 100))
/*
* Determining the size of a file block in the filesystem.
*/
#define blksize(fs, ip, lbn) \
(((lbn) >= UFS_NDADDR || (ip)->i_size >= \
(uint64_t)smalllblktosize(fs, (lbn) + 1)) \
? (fs)->fs_bsize \
: (fragroundup(fs, blkoff(fs, (ip)->i_size))))
#define sblksize(fs, size, lbn) \
(((lbn) >= UFS_NDADDR || (size) >= ((lbn) + 1) << (fs)->fs_bshift) \
? (fs)->fs_bsize \
: (fragroundup(fs, blkoff(fs, (size)))))
/*
* Number of indirects in a filesystem block.
*/
#define NINDIR(fs) ((fs)->fs_nindir)
/*
* Indirect lbns are aligned on UFS_NDADDR addresses where single indirects
* are the negated address of the lowest lbn reachable, double indirects
* are this lbn - 1 and triple indirects are this lbn - 2. This yields
* an unusual bit order to determine level.
*/
static inline int
lbn_level(ufs_lbn_t lbn)
{
if (lbn >= 0)
return 0;
switch (lbn & 0x3) {
case 0:
return (0);
case 1:
break;
case 2:
return (2);
case 3:
return (1);
default:
break;
}
return (-1);
}
static inline ufs_lbn_t
lbn_offset(struct fs *fs, int level)
{
ufs_lbn_t res;
for (res = 1; level > 0; level--)
res *= NINDIR(fs);
return (res);
}
/*
* Number of inodes in a secondary storage block/fragment.
*/
#define INOPB(fs) ((fs)->fs_inopb)
#define INOPF(fs) ((fs)->fs_inopb >> (fs)->fs_fragshift)
/*
* Softdep journal record format.
*/
#define JOP_ADDREF 1 /* Add a reference to an inode. */
#define JOP_REMREF 2 /* Remove a reference from an inode. */
#define JOP_NEWBLK 3 /* Allocate a block. */
#define JOP_FREEBLK 4 /* Free a block or a tree of blocks. */
#define JOP_MVREF 5 /* Move a reference from one off to another. */
#define JOP_TRUNC 6 /* Partial truncation record. */
#define JOP_SYNC 7 /* fsync() complete record. */
#define JREC_SIZE 32 /* Record and segment header size. */
#define SUJ_MIN (4 * 1024 * 1024) /* Minimum journal size */
#define SUJ_FILE ".sujournal" /* Journal file name */
/*
* Size of the segment record header. There is at most one for each disk
* block in the journal. The segment header is followed by an array of
* records. fsck depends on the first element in each record being 'op'
* and the second being 'ino'. Segments may span multiple disk blocks but
* the header is present on each.
*/
struct jsegrec {
uint64_t jsr_seq; /* Our sequence number */
uint64_t jsr_oldest; /* Oldest valid sequence number */
uint16_t jsr_cnt; /* Count of valid records */
uint16_t jsr_blocks; /* Count of device bsize blocks. */
uint32_t jsr_crc; /* 32bit crc of the valid space */
ufs_time_t jsr_time; /* timestamp for mount instance */
};
/*
* Reference record. Records a single link count modification.
*/
struct jrefrec {
uint32_t jr_op;
uint32_t jr_ino;
uint32_t jr_parent;
uint16_t jr_nlink;
uint16_t jr_mode;
int64_t jr_diroff;
uint64_t jr_unused;
};
/*
* Move record. Records a reference moving within a directory block. The
* nlink is unchanged but we must search both locations.
*/
struct jmvrec {
uint32_t jm_op;
uint32_t jm_ino;
uint32_t jm_parent;
uint16_t jm_unused;
int64_t jm_oldoff;
int64_t jm_newoff;
};
/*
* Block record. A set of frags or tree of blocks starting at an indirect are
* freed or a set of frags are allocated.
*/
struct jblkrec {
uint32_t jb_op;
uint32_t jb_ino;
ufs2_daddr_t jb_blkno;
ufs_lbn_t jb_lbn;
uint16_t jb_frags;
uint16_t jb_oldfrags;
uint32_t jb_unused;
};
/*
* Truncation record. Records a partial truncation so that it may be
* completed at check time. Also used for sync records.
*/
struct jtrncrec {
uint32_t jt_op;
uint32_t jt_ino;
int64_t jt_size;
uint32_t jt_extsize;
uint32_t jt_pad[3];
};
union jrec {
struct jsegrec rec_jsegrec;
struct jrefrec rec_jrefrec;
struct jmvrec rec_jmvrec;
struct jblkrec rec_jblkrec;
struct jtrncrec rec_jtrncrec;
};
#ifdef CTASSERT
CTASSERT(sizeof(struct jsegrec) == JREC_SIZE);
CTASSERT(sizeof(struct jrefrec) == JREC_SIZE);
CTASSERT(sizeof(struct jmvrec) == JREC_SIZE);
CTASSERT(sizeof(struct jblkrec) == JREC_SIZE);
CTASSERT(sizeof(struct jtrncrec) == JREC_SIZE);
CTASSERT(sizeof(union jrec) == JREC_SIZE);
#endif
extern int inside[], around[];
extern u_char *fragtbl[];
/*
* IOCTLs used for filesystem write suspension.
*/
#define UFSSUSPEND _IOW('U', 1, fsid_t)
#define UFSRESUME _IO('U', 2)
#endif