freebsd-dev/sys/i386/scsi/aic7xxx.h
Justin T. Gibbs cfa2e9e703 Keep track of when we actually are awaiting a reply to an SDTR or WDTR
message instead of relying on the fact that we are scheduled to send them.
The old method worked 99.9% of the time, but someone reported some periferals
that did MSG_REJECT at odd times (sometimes before we could send an SDTR
or WDTR) that we would construe as the response to an SDTR or WDTR message.
This also removes a possible race condition where after a bus reset (the
result of a command time out not during intial probe time), we might queue
two commands both requesting SDTR, WDTR or both.
1995-02-03 17:15:12 +00:00

153 lines
5.1 KiB
C

/*
* Interface to the generic driver for the aic7xxx based adaptec
* SCSI controllers. This is used to implement product specific
* probe and attach routines.
*
* Copyright (c) 1994, 1995 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Absolutely no warranty of function or purpose is made by the author
* Justin T. Gibbs.
* 4. Modifications may be freely made to this file if the above conditions
* are met.
*
* $Id: aic7xxx.h,v 1.2 1995/01/16 16:33:47 gibbs Exp $
*/
#ifndef _AIC7XXX_H_
#define _AIC7XXX_H_
#include "ahc.h" /* for NAHC from config */
#define AHC_NSEG 256 /* number of dma segments supported */
#define AHC_SCB_MAX 16 /*
* Up to 16 SCBs on some types of aic7xxx based
* boards. The aic7770 family only have 4
*/
/* #define AHCDEBUG */
typedef unsigned long int physaddr;
extern int ahc_unit;
struct ahc_dma_seg {
physaddr addr;
long len;
};
typedef enum {
AHC_274, /* Single Channel */
AHC_274T, /* Twin Channel */
AHC_274W, /* Wide Channel */
AHC_284, /* VL Single Channel */
AHC_284T, /* VL Twin Channel */
AHC_284W, /* VL Wide Channel - Do these exist?? */
AHC_294, /* PCI Single Channel */
AHC_294T, /* PCI Twin Channel */
AHC_294W /* PCI Wide Channel */
}ahc_type;
/*
* The driver keeps up to four scb structures per card in memory. Only the
* first 26 bytes of the structure are valid for the hardware, the rest used
* for driver level bookeeping. The "__attribute ((packed))" tags ensure that
* gcc does not attempt to pad the long ints in the structure to word
* boundaries since the first 26 bytes of this structure must have the correct
* offsets for the hardware to find them. The driver is further optimized
* so that we only have to download the first 19 bytes since as long
* as we always use S/G, the last fields should be zero anyway.
*/
struct scb {
/* ------------ Begin hardware supported fields ---------------- */
/*1*/ u_char control;
#define SCB_NEEDWDTR 0x80 /* Initiate Wide Negotiation */
#define SCB_NEEDSDTR 0x40 /* Initiate Sync Negotiation */
#define SCB_NEEDDMA 0x08 /* SCB needs to be DMA'd from
* from host memory
*/
#define SCB_TE 0x20 /* Tag enable */
#define SCB_WAITING 0x06
#define SCB_DIS 0x04
#define SCB_TAG_TYPE 0x3
#define SIMPLE_QUEUE 0x0
#define HEAD_QUEUE 0x1
#define OR_QUEUE 0x2
/*2*/ u_char target_channel_lun; /* 4/1/3 bits */
/*3*/ u_char SG_segment_count;
/*7*/ physaddr SG_list_pointer __attribute__ ((packed));
/*11*/ physaddr cmdpointer __attribute__ ((packed));
/*12*/ u_char cmdlen;
/*14*/ u_char RESERVED[2]; /* must be zero */
/*15*/ u_char target_status;
/*18*/ u_char residual_data_count[3];
/*19*/ u_char residual_SG_segment_count;
#define SCB_DOWN_SIZE 19 /* amount to actually download */
/*23*/ physaddr data __attribute__ ((packed));
/*26*/ u_char datalen[3];
#define SCB_UP_SIZE 26 /* amount to actually upload */
/*30*/ physaddr host_scb __attribute__ ((packed));
#if 0
/*
* No real point in transferring this to the
* SCB registers.
*/
unsigned char RESERVED[2];
#endif
/*-----------------end of hardware supported fields----------------*/
struct scb *next; /* in free list */
struct scsi_xfer *xs; /* the scsi_xfer for this cmd */
int flags;
#define SCB_FREE 0x00
#define SCB_ACTIVE 0x01
#define SCB_ABORTED 0x02
#define SCB_IMMED 0x04
#define SCB_IMMED_FAIL 0x08
#define SCB_SENSE 0x10
int position; /* Position in scbarray */
struct ahc_dma_seg ahc_dma[AHC_NSEG] __attribute__ ((packed));
struct scsi_sense sense_cmd; /* SCSI command block */
};
struct ahc_data {
ahc_type type;
int flags;
#define AHC_INIT 0x01
#define AHC_RUNNING 0x02
u_long baseport;
struct scb *scbarray[AHC_SCB_MAX]; /* Mirror boards scbarray */
struct scb *free_scb;
int our_id; /* our scsi id */
int our_id_b; /* B channel scsi id */
int vect;
struct scb *immed_ecb; /* an outstanding immediete command */
struct scsi_link sc_link;
struct scsi_link sc_link_b; /* Second bus for Twin channel cards */
u_short needsdtr_orig; /* Targets we initiate sync neg with */
u_short needwdtr_orig; /* Targets we initiate wide neg with */
u_short needsdtr; /* Current list of negotiated targets */
u_short needwdtr; /* Current list of negotiated targets */
u_short sdtrpending; /* Pending SDTR to these targets */
u_short wdtrpending; /* Pending WDTR to these targets */
int numscbs;
u_char maxscbs;
int unpause;
};
extern struct ahc_data *ahcdata[NAHC];
int ahcprobe __P((int unit, u_long io_base, ahc_type type));
int ahc_attach __P((int unit));
int ahcintr();
#endif /* _AIC7XXX_H_ */