d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
723180da59
freebsd-dev/sys/dev/atkbdc/psm.c
Kyle Evans e88f22ff04 psm: use make_dev_s instead of make_dev 
This most importantly reduces duplication, but it also removes any potential
race with usage of dev->si_drv1 since it's now set prior to the device being
constructed enough to be accessible.
2020-02-04 18:45:28 +00:00

7577 lines
216 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*-
* Copyright (c) 1992, 1993 Erik Forsberg.
* Copyright (c) 1996, 1997 Kazutaka YOKOTA.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Ported to 386bsd Oct 17, 1992
* Sandi Donno, Computer Science, University of Cape Town, South Africa
* Please send bug reports to sandi@cs.uct.ac.za
*
* Thanks are also due to Rick Macklem, rick@snowhite.cis.uoguelph.ca -
* although I was only partially successful in getting the alpha release
* of his "driver for the Logitech and ATI Inport Bus mice for use with
* 386bsd and the X386 port" to work with my Microsoft mouse, I nevertheless
* found his code to be an invaluable reference when porting this driver
* to 386bsd.
*
* Further modifications for latest 386BSD+patchkit and port to NetBSD,
* Andrew Herbert <andrew@werple.apana.org.au> - 8 June 1993
*
* Cloned from the Microsoft Bus Mouse driver, also by Erik Forsberg, by
* Andrew Herbert - 12 June 1993
*
* Modified for PS/2 mouse by Charles Hannum <mycroft@ai.mit.edu>
* - 13 June 1993
*
* Modified for PS/2 AUX mouse by Shoji Yuen <yuen@nuie.nagoya-u.ac.jp>
* - 24 October 1993
*
* Hardware access routines and probe logic rewritten by
* Kazutaka Yokota <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* - 3, 14, 22 October 1996.
* - 12 November 1996. IOCTLs and rearranging `psmread', `psmioctl'...
* - 14, 30 November 1996. Uses `kbdio.c'.
* - 13 December 1996. Uses queuing version of `kbdio.c'.
* - January/February 1997. Tweaked probe logic for
* HiNote UltraII/Latitude/Armada laptops.
* - 30 July 1997. Added APM support.
* - 5 March 1997. Defined driver configuration flags (PSM_CONFIG_XXX).
* Improved sync check logic.
* Vendor specific support routines.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_isa.h"
#include "opt_psm.h"
#include "opt_evdev.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/filio.h>
#include <sys/mutex.h>
#include <sys/poll.h>
#include <sys/sigio.h>
#include <sys/signalvar.h>
#include <sys/syslog.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/selinfo.h>
#include <sys/sysctl.h>
#include <sys/time.h>
#include <sys/uio.h>
#include <sys/limits.h>
#include <sys/mouse.h>
#include <machine/resource.h>
#ifdef DEV_ISA
#include <isa/isavar.h>
#endif
#ifdef EVDEV_SUPPORT
#include <dev/evdev/evdev.h>
#include <dev/evdev/input.h>
#endif
#include <dev/atkbdc/atkbdcreg.h>
#include <dev/atkbdc/psm.h>
/*
* Driver specific options: the following options may be set by
* `options' statements in the kernel configuration file.
*/
/* debugging */
#ifndef PSM_DEBUG
#define PSM_DEBUG 0 /*
* logging: 0: none, 1: brief, 2: verbose
* 3: sync errors, 4: all packets
*/
#endif
#define VLOG(level, args) do { \
if (verbose >= level) \
log args; \
} while (0)
#ifndef PSM_INPUT_TIMEOUT
#define PSM_INPUT_TIMEOUT 2000000 /* 2 sec */
#endif
#ifndef PSM_TAP_TIMEOUT
#define PSM_TAP_TIMEOUT 125000
#endif
#ifndef PSM_TAP_THRESHOLD
#define PSM_TAP_THRESHOLD 25
#endif
/* end of driver specific options */
#define PSMCPNP_DRIVER_NAME "psmcpnp"
struct psmcpnp_softc {
enum {
PSMCPNP_GENERIC,
PSMCPNP_FORCEPAD,
PSMCPNP_TOPBUTTONPAD,
} type; /* Based on PnP ID */
};
/* input queue */
#define PSM_BUFSIZE 960
#define PSM_SMALLBUFSIZE 240
/* operation levels */
#define PSM_LEVEL_BASE 0
#define PSM_LEVEL_STANDARD 1
#define PSM_LEVEL_NATIVE 2
#define PSM_LEVEL_MIN PSM_LEVEL_BASE
#define PSM_LEVEL_MAX PSM_LEVEL_NATIVE
/* Active PS/2 multiplexing */
#define PSM_NOMUX (-1)
/* Logitech PS2++ protocol */
#define MOUSE_PS2PLUS_CHECKBITS(b) \
((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
#define MOUSE_PS2PLUS_PACKET_TYPE(b) \
(((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
/* ring buffer */
typedef struct ringbuf {
int count; /* # of valid elements in the buffer */
int head; /* head pointer */
int tail; /* tail poiner */
u_char buf[PSM_BUFSIZE];
} ringbuf_t;
/* data buffer */
typedef struct packetbuf {
u_char ipacket[16]; /* interim input buffer */
int inputbytes; /* # of bytes in the input buffer */
} packetbuf_t;
#ifndef PSM_PACKETQUEUE
#define PSM_PACKETQUEUE 128
#endif
/*
* Synaptics command definitions.
*/
#define SYNAPTICS_READ_IDENTITY 0x00
#define SYNAPTICS_READ_MODES 0x01
#define SYNAPTICS_READ_CAPABILITIES 0x02
#define SYNAPTICS_READ_MODEL_ID 0x03
#define SYNAPTICS_READ_SERIAL_PREFIX 0x06
#define SYNAPTICS_READ_SERIAL_SUFFIX 0x07
#define SYNAPTICS_READ_RESOLUTIONS 0x08
#define SYNAPTICS_READ_EXTENDED 0x09
#define SYNAPTICS_READ_CAPABILITIES_CONT 0x0c
#define SYNAPTICS_READ_MAX_COORDS 0x0d
#define SYNAPTICS_READ_DELUXE_LED 0x0e
#define SYNAPTICS_READ_MIN_COORDS 0x0f
typedef struct synapticsinfo {
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
int directional_scrolls;
int two_finger_scroll;
int min_pressure;
int max_pressure;
int max_width;
int margin_top;
int margin_right;
int margin_bottom;
int margin_left;
int na_top;
int na_right;
int na_bottom;
int na_left;
int window_min;
int window_max;
int multiplicator;
int weight_current;
int weight_previous;
int weight_previous_na;
int weight_len_squared;
int div_min;
int div_max;
int div_max_na;
int div_len;
int tap_max_delta;
int tap_min_queue;
int taphold_timeout;
int vscroll_ver_area;
int vscroll_hor_area;
int vscroll_min_delta;
int vscroll_div_min;
int vscroll_div_max;
int touchpad_off;
int softbuttons_y;
int softbutton2_x;
int softbutton3_x;
int max_x;
int max_y;
int three_finger_drag;
int natural_scroll;
} synapticsinfo_t;
typedef struct synapticspacket {
int x;
int y;
} synapticspacket_t;
#define SYNAPTICS_PACKETQUEUE 10
#define SYNAPTICS_QUEUE_CURSOR(x) \
(x + SYNAPTICS_PACKETQUEUE) % SYNAPTICS_PACKETQUEUE
#define SYNAPTICS_VERSION_GE(synhw, major, minor) \
((synhw).infoMajor > (major) || \
((synhw).infoMajor == (major) && (synhw).infoMinor >= (minor)))
typedef struct smoother {
synapticspacket_t queue[SYNAPTICS_PACKETQUEUE];
int queue_len;
int queue_cursor;
int start_x;
int start_y;
int avg_dx;
int avg_dy;
int squelch_x;
int squelch_y;
int is_fuzzy;
int active;
} smoother_t;
typedef struct gesture {
int window_min;
int fingers_nb;
int tap_button;
int in_taphold;
int in_vscroll;
int zmax; /* maximum pressure value */
struct timeval taptimeout; /* tap timeout for touchpads */
} gesture_t;
enum {
TRACKPOINT_SYSCTL_SENSITIVITY,
TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
TRACKPOINT_SYSCTL_UPPER_PLATEAU,
TRACKPOINT_SYSCTL_BACKUP_RANGE,
TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
TRACKPOINT_SYSCTL_MINIMUM_DRAG,
TRACKPOINT_SYSCTL_UP_THRESHOLD,
TRACKPOINT_SYSCTL_THRESHOLD,
TRACKPOINT_SYSCTL_JENKS_CURVATURE,
TRACKPOINT_SYSCTL_Z_TIME,
TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
TRACKPOINT_SYSCTL_SKIP_BACKUPS
};
typedef struct trackpointinfo {
struct sysctl_ctx_list sysctl_ctx;
struct sysctl_oid *sysctl_tree;
int sensitivity;
int inertia;
int uplateau;
int reach;
int draghys;
int mindrag;
int upthresh;
int threshold;
int jenks;
int ztime;
int pts;
int skipback;
} trackpointinfo_t;
typedef struct finger {
int x;
int y;
int p;
int w;
int flags;
} finger_t;
#define PSM_FINGERS 2 /* # of processed fingers */
#define PSM_FINGER_IS_PEN (1<<0)
#define PSM_FINGER_FUZZY (1<<1)
#define PSM_FINGER_DEFAULT_P tap_threshold
#define PSM_FINGER_DEFAULT_W 1
#define PSM_FINGER_IS_SET(f) ((f).x != -1 && (f).y != -1 && (f).p != 0)
#define PSM_FINGER_RESET(f) do { \
(f) = (finger_t) { .x = -1, .y = -1, .p = 0, .w = 0, .flags = 0 }; \
} while (0)
typedef struct elantechhw {
int hwversion;
int fwversion;
int sizex;
int sizey;
int dpmmx;
int dpmmy;
int ntracesx;
int ntracesy;
int dptracex;
int dptracey;
int issemimt;
int isclickpad;
int hascrc;
int hastrackpoint;
int haspressure;
} elantechhw_t;
/* minimum versions supported by this driver */
#define ELANTECH_HW_IS_V1(fwver) ((fwver) < 0x020030 || (fwver) == 0x020600)
#define ELANTECH_MAGIC(magic) \
((magic)[0] == 0x3c && (magic)[1] == 0x03 && \
((magic)[2] == 0xc8 || (magic)[2] == 0x00))
#define ELANTECH_FW_ID 0x00
#define ELANTECH_FW_VERSION 0x01
#define ELANTECH_CAPABILITIES 0x02
#define ELANTECH_SAMPLE 0x03
#define ELANTECH_RESOLUTION 0x04
#define ELANTECH_REG_READ 0x10
#define ELANTECH_REG_WRITE 0x11
#define ELANTECH_REG_RDWR 0x00
#define ELANTECH_CUSTOM_CMD 0xf8
#ifdef EVDEV_SUPPORT
#define ELANTECH_MAX_FINGERS 5
#else
#define ELANTECH_MAX_FINGERS PSM_FINGERS
#endif
#define ELANTECH_FINGER_MAX_P 255
#define ELANTECH_FINGER_MAX_W 15
#define ELANTECH_FINGER_SET_XYP(pb) (finger_t) { \
.x = (((pb)->ipacket[1] & 0x0f) << 8) | (pb)->ipacket[2], \
.y = (((pb)->ipacket[4] & 0x0f) << 8) | (pb)->ipacket[5], \
.p = ((pb)->ipacket[1] & 0xf0) | (((pb)->ipacket[4] >> 4) & 0x0f), \
.w = PSM_FINGER_DEFAULT_W, \
.flags = 0 \
}
enum {
ELANTECH_PKT_NOP,
ELANTECH_PKT_TRACKPOINT,
ELANTECH_PKT_V2_COMMON,
ELANTECH_PKT_V2_2FINGER,
ELANTECH_PKT_V3,
ELANTECH_PKT_V4_STATUS,
ELANTECH_PKT_V4_HEAD,
ELANTECH_PKT_V4_MOTION
};
#define ELANTECH_PKT_IS_TRACKPOINT(pb) (((pb)->ipacket[3] & 0x0f) == 0x06)
#define ELANTECH_PKT_IS_DEBOUNCE(pb, hwversion) ((hwversion) == 4 ? 0 : \
(pb)->ipacket[0] == ((hwversion) == 2 ? 0x84 : 0xc4) && \
(pb)->ipacket[1] == 0xff && (pb)->ipacket[2] == 0xff && \
(pb)->ipacket[3] == 0x02 && (pb)->ipacket[4] == 0xff && \
(pb)->ipacket[5] == 0xff)
#define ELANTECH_PKT_IS_V2(pb) \
(((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0x0f) == 0x02)
#define ELANTECH_PKT_IS_V3_HEAD(pb, hascrc) ((hascrc) ? \
((pb)->ipacket[3] & 0x09) == 0x08 : \
((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0xcf) == 0x02)
#define ELANTECH_PKT_IS_V3_TAIL(pb, hascrc) ((hascrc) ? \
((pb)->ipacket[3] & 0x09) == 0x09 : \
((pb)->ipacket[0] & 0x0c) == 0x0c && ((pb)->ipacket[3] & 0xce) == 0x0c)
#define ELANTECH_PKT_IS_V4(pb, hascrc) ((hascrc) ? \
((pb)->ipacket[3] & 0x08) == 0x00 : \
((pb)->ipacket[0] & 0x0c) == 0x04 && ((pb)->ipacket[3] & 0x1c) == 0x10)
typedef struct elantechaction {
finger_t fingers[ELANTECH_MAX_FINGERS];
int mask;
int mask_v4wait;
} elantechaction_t;
/* driver control block */
struct psm_softc { /* Driver status information */
int unit;
struct selinfo rsel; /* Process selecting for Input */
u_char state; /* Mouse driver state */
int config; /* driver configuration flags */
int flags; /* other flags */
KBDC kbdc; /* handle to access kbd controller */
struct resource *intr; /* IRQ resource */
void *ih; /* interrupt handle */
mousehw_t hw; /* hardware information */
synapticshw_t synhw; /* Synaptics hardware information */
synapticsinfo_t syninfo; /* Synaptics configuration */
smoother_t smoother[PSM_FINGERS]; /* Motion smoothing */
gesture_t gesture; /* Gesture context */
elantechhw_t elanhw; /* Elantech hardware information */
elantechaction_t elanaction; /* Elantech action context */
int tphw; /* TrackPoint hardware information */
trackpointinfo_t tpinfo; /* TrackPoint configuration */
mousemode_t mode; /* operation mode */
mousemode_t dflt_mode; /* default operation mode */
mousestatus_t status; /* accumulated mouse movement */
ringbuf_t queue; /* mouse status queue */
packetbuf_t pqueue[PSM_PACKETQUEUE]; /* mouse data queue */
int pqueue_start; /* start of data in queue */
int pqueue_end; /* end of data in queue */
int button; /* the latest button state */
int xold; /* previous absolute X position */
int yold; /* previous absolute Y position */
int xaverage; /* average X position */
int yaverage; /* average Y position */
int squelch; /* level to filter movement at low speed */
int syncerrors; /* # of bytes discarded to synchronize */
int pkterrors; /* # of packets failed during quaranteen. */
int fpcount; /* forcePad valid packet counter */
struct timeval inputtimeout;
struct timeval lastsoftintr; /* time of last soft interrupt */
struct timeval lastinputerr; /* time last sync error happened */
struct timeval idletimeout;
packetbuf_t idlepacket; /* packet to send after idle timeout */
int watchdog; /* watchdog timer flag */
struct callout callout; /* watchdog timer call out */
struct callout softcallout; /* buffer timer call out */
struct cdev *dev;
struct cdev *bdev;
int lasterr;
int cmdcount;
struct sigio *async; /* Processes waiting for SIGIO */
int extended_buttons;
int muxport; /* MUX port with attached Synaptics */
u_char muxsave[3]; /* 3->6 byte proto conversion buffer */
int muxtpbuttons; /* Touchpad button state */
int muxmsbuttons; /* Mouse (trackpoint) button state */
struct timeval muxmidtimeout; /* middle button supression timeout */
#ifdef EVDEV_SUPPORT
struct evdev_dev *evdev_a; /* Absolute reporting device */
struct evdev_dev *evdev_r; /* Relative reporting device */
#endif
};
static devclass_t psm_devclass;
/* driver state flags (state) */
#define PSM_VALID 0x80
#define PSM_OPEN 1 /* Device is open */
#define PSM_ASLP 2 /* Waiting for mouse data */
#define PSM_SOFTARMED 4 /* Software interrupt armed */
#define PSM_NEED_SYNCBITS 8 /* Set syncbits using next data pkt */
#define PSM_EV_OPEN_R 0x10 /* Relative evdev device is open */
#define PSM_EV_OPEN_A 0x20 /* Absolute evdev device is open */
/* driver configuration flags (config) */
#define PSM_CONFIG_RESOLUTION 0x000f /* resolution */
#define PSM_CONFIG_ACCEL 0x00f0 /* acceleration factor */
#define PSM_CONFIG_NOCHECKSYNC 0x0100 /* disable sync. test */
#define PSM_CONFIG_NOIDPROBE 0x0200 /* disable mouse model probe */
#define PSM_CONFIG_NORESET 0x0400 /* don't reset the mouse */
#define PSM_CONFIG_FORCETAP 0x0800 /* assume `tap' action exists */
#define PSM_CONFIG_IGNPORTERROR 0x1000 /* ignore error in aux port test */
#define PSM_CONFIG_HOOKRESUME 0x2000 /* hook the system resume event */
#define PSM_CONFIG_INITAFTERSUSPEND 0x4000 /* init the device at the resume event */
#define PSM_CONFIG_FLAGS \
(PSM_CONFIG_RESOLUTION | \
PSM_CONFIG_ACCEL | \
PSM_CONFIG_NOCHECKSYNC | \
PSM_CONFIG_NOIDPROBE | \
PSM_CONFIG_NORESET | \
PSM_CONFIG_FORCETAP | \
PSM_CONFIG_IGNPORTERROR | \
PSM_CONFIG_HOOKRESUME | \
PSM_CONFIG_INITAFTERSUSPEND)
/* other flags (flags) */
#define PSM_FLAGS_FINGERDOWN 0x0001 /* VersaPad finger down */
#define kbdcp(p) ((atkbdc_softc_t *)(p))
#define ALWAYS_RESTORE_CONTROLLER(kbdc) !(kbdcp(kbdc)->quirks \
& KBDC_QUIRK_KEEP_ACTIVATED)
/* Tunables */
static int tap_enabled = -1;
static int verbose = PSM_DEBUG;
static int synaptics_support = 1;
static int trackpoint_support = 1;
static int elantech_support = 1;
/* for backward compatibility */
#define OLD_MOUSE_GETHWINFO _IOR('M', 1, old_mousehw_t)
#define OLD_MOUSE_GETMODE _IOR('M', 2, old_mousemode_t)
#define OLD_MOUSE_SETMODE _IOW('M', 3, old_mousemode_t)
typedef struct old_mousehw {
int buttons;
int iftype;
int type;
int hwid;
} old_mousehw_t;
typedef struct old_mousemode {
int protocol;
int rate;
int resolution;
int accelfactor;
} old_mousemode_t;
#define SYN_OFFSET(field) offsetof(struct psm_softc, syninfo.field)
enum {
SYNAPTICS_SYSCTL_MIN_PRESSURE = SYN_OFFSET(min_pressure),
SYNAPTICS_SYSCTL_MAX_PRESSURE = SYN_OFFSET(max_pressure),
SYNAPTICS_SYSCTL_MAX_WIDTH = SYN_OFFSET(max_width),
SYNAPTICS_SYSCTL_MARGIN_TOP = SYN_OFFSET(margin_top),
SYNAPTICS_SYSCTL_MARGIN_RIGHT = SYN_OFFSET(margin_right),
SYNAPTICS_SYSCTL_MARGIN_BOTTOM = SYN_OFFSET(margin_bottom),
SYNAPTICS_SYSCTL_MARGIN_LEFT = SYN_OFFSET(margin_left),
SYNAPTICS_SYSCTL_NA_TOP = SYN_OFFSET(na_top),
SYNAPTICS_SYSCTL_NA_RIGHT = SYN_OFFSET(na_right),
SYNAPTICS_SYSCTL_NA_BOTTOM = SYN_OFFSET(na_bottom),
SYNAPTICS_SYSCTL_NA_LEFT = SYN_OFFSET(na_left),
SYNAPTICS_SYSCTL_WINDOW_MIN = SYN_OFFSET(window_min),
SYNAPTICS_SYSCTL_WINDOW_MAX = SYN_OFFSET(window_max),
SYNAPTICS_SYSCTL_MULTIPLICATOR = SYN_OFFSET(multiplicator),
SYNAPTICS_SYSCTL_WEIGHT_CURRENT = SYN_OFFSET(weight_current),
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS = SYN_OFFSET(weight_previous),
SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA = SYN_OFFSET(weight_previous_na),
SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED = SYN_OFFSET(weight_len_squared),
SYNAPTICS_SYSCTL_DIV_MIN = SYN_OFFSET(div_min),
SYNAPTICS_SYSCTL_DIV_MAX = SYN_OFFSET(div_max),
SYNAPTICS_SYSCTL_DIV_MAX_NA = SYN_OFFSET(div_max_na),
SYNAPTICS_SYSCTL_DIV_LEN = SYN_OFFSET(div_len),
SYNAPTICS_SYSCTL_TAP_MAX_DELTA = SYN_OFFSET(tap_max_delta),
SYNAPTICS_SYSCTL_TAP_MIN_QUEUE = SYN_OFFSET(tap_min_queue),
SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT = SYN_OFFSET(taphold_timeout),
SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA = SYN_OFFSET(vscroll_hor_area),
SYNAPTICS_SYSCTL_VSCROLL_VER_AREA = SYN_OFFSET(vscroll_ver_area),
SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA = SYN_OFFSET(vscroll_min_delta),
SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN = SYN_OFFSET(vscroll_div_min),
SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX = SYN_OFFSET(vscroll_div_max),
SYNAPTICS_SYSCTL_TOUCHPAD_OFF = SYN_OFFSET(touchpad_off),
SYNAPTICS_SYSCTL_SOFTBUTTONS_Y = SYN_OFFSET(softbuttons_y),
SYNAPTICS_SYSCTL_SOFTBUTTON2_X = SYN_OFFSET(softbutton2_x),
SYNAPTICS_SYSCTL_SOFTBUTTON3_X = SYN_OFFSET(softbutton3_x),
SYNAPTICS_SYSCTL_THREE_FINGER_DRAG = SYN_OFFSET(three_finger_drag),
SYNAPTICS_SYSCTL_NATURAL_SCROLL = SYN_OFFSET(natural_scroll),
#define SYNAPTICS_SYSCTL_LAST SYNAPTICS_SYSCTL_NATURAL_SCROLL
};
/* packet formatting function */
typedef int packetfunc_t(struct psm_softc *, u_char *, int *, int,
mousestatus_t *);
/* function prototypes */
static void psmidentify(driver_t *, device_t);
static int psmprobe(device_t);
static int psmattach(device_t);
static int psmdetach(device_t);
static int psmresume(device_t);
static d_open_t psm_cdev_open;
static d_close_t psm_cdev_close;
static d_read_t psmread;
static d_write_t psmwrite;
static d_ioctl_t psmioctl;
static d_poll_t psmpoll;
static int psmopen(struct psm_softc *);
static int psmclose(struct psm_softc *);
#ifdef EVDEV_SUPPORT
static evdev_open_t psm_ev_open_r;
static evdev_close_t psm_ev_close_r;
static evdev_open_t psm_ev_open_a;
static evdev_close_t psm_ev_close_a;
#endif
static int enable_aux_dev(KBDC);
static int disable_aux_dev(KBDC);
static int get_mouse_status(KBDC, int *, int, int);
static int get_aux_id(KBDC);
static int set_mouse_sampling_rate(KBDC, int);
static int set_mouse_scaling(KBDC, int);
static int set_mouse_resolution(KBDC, int);
static int set_mouse_mode(KBDC);
static int get_mouse_buttons(KBDC);
static int is_a_mouse(int);
static void recover_from_error(KBDC);
static int restore_controller(KBDC, int);
static int doinitialize(struct psm_softc *, mousemode_t *);
static int doopen(struct psm_softc *, int);
static int reinitialize(struct psm_softc *, int);
static char *model_name(int);
static void psmsoftintr(void *);
static void psmsoftintridle(void *);
static void psmintr(void *);
static void psmtimeout(void *);
static int timeelapsed(const struct timeval *, int, int,
const struct timeval *);
static void dropqueue(struct psm_softc *);
static void flushpackets(struct psm_softc *);
static void proc_mmanplus(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int proc_synaptics(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int proc_synaptics_mux(struct psm_softc *, packetbuf_t *);
static void proc_versapad(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int proc_elantech(struct psm_softc *, packetbuf_t *,
mousestatus_t *, int *, int *, int *);
static int psmpalmdetect(struct psm_softc *, finger_t *, int);
static void psmgestures(struct psm_softc *, finger_t *, int,
mousestatus_t *);
static void psmsmoother(struct psm_softc *, finger_t *, int,
mousestatus_t *, int *, int *);
static int tame_mouse(struct psm_softc *, packetbuf_t *, mousestatus_t *,
u_char *);
/* vendor specific features */
enum probearg { PROBE, REINIT };
typedef int probefunc_t(struct psm_softc *, enum probearg);
static int mouse_id_proc1(KBDC, int, int, int *);
static int mouse_ext_command(KBDC, int);
static probefunc_t enable_groller;
static probefunc_t enable_gmouse;
static probefunc_t enable_aglide;
static probefunc_t enable_kmouse;
static probefunc_t enable_msexplorer;
static probefunc_t enable_msintelli;
static probefunc_t enable_4dmouse;
static probefunc_t enable_4dplus;
static probefunc_t enable_mmanplus;
static probefunc_t enable_synaptics;
static probefunc_t enable_synaptics_mux;
static probefunc_t enable_trackpoint;
static probefunc_t enable_versapad;
static probefunc_t enable_elantech;
static void set_trackpoint_parameters(struct psm_softc *sc);
static void synaptics_passthrough_on(struct psm_softc *sc);
static void synaptics_passthrough_off(struct psm_softc *sc);
static int synaptics_preferred_mode(struct psm_softc *sc);
static void synaptics_set_mode(struct psm_softc *sc, int mode_byte);
static struct {
int model;
u_char syncmask;
int packetsize;
probefunc_t *probefunc;
} vendortype[] = {
/*
* WARNING: the order of probe is very important. Don't mess it
* unless you know what you are doing.
*/
{ MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad on Active Mux */
0x00, MOUSE_PS2_PACKETSIZE, enable_synaptics_mux },
{ MOUSE_MODEL_NET, /* Genius NetMouse */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_gmouse },
{ MOUSE_MODEL_NETSCROLL, /* Genius NetScroll */
0xc8, 6, enable_groller },
{ MOUSE_MODEL_MOUSEMANPLUS, /* Logitech MouseMan+ */
0x08, MOUSE_PS2_PACKETSIZE, enable_mmanplus },
{ MOUSE_MODEL_EXPLORER, /* Microsoft IntelliMouse Explorer */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msexplorer },
{ MOUSE_MODEL_4D, /* A4 Tech 4D Mouse */
0x08, MOUSE_4D_PACKETSIZE, enable_4dmouse },
{ MOUSE_MODEL_4DPLUS, /* A4 Tech 4D+ Mouse */
0xc8, MOUSE_4DPLUS_PACKETSIZE, enable_4dplus },
{ MOUSE_MODEL_SYNAPTICS, /* Synaptics Touchpad */
0xc0, MOUSE_SYNAPTICS_PACKETSIZE, enable_synaptics },
{ MOUSE_MODEL_ELANTECH, /* Elantech Touchpad */
0x04, MOUSE_ELANTECH_PACKETSIZE, enable_elantech },
{ MOUSE_MODEL_INTELLI, /* Microsoft IntelliMouse */
0x08, MOUSE_PS2INTELLI_PACKETSIZE, enable_msintelli },
{ MOUSE_MODEL_GLIDEPOINT, /* ALPS GlidePoint */
0xc0, MOUSE_PS2_PACKETSIZE, enable_aglide },
{ MOUSE_MODEL_THINK, /* Kensington ThinkingMouse */
0x80, MOUSE_PS2_PACKETSIZE, enable_kmouse },
{ MOUSE_MODEL_VERSAPAD, /* Interlink electronics VersaPad */
0xe8, MOUSE_PS2VERSA_PACKETSIZE, enable_versapad },
{ MOUSE_MODEL_TRACKPOINT, /* IBM/Lenovo TrackPoint */
0xc0, MOUSE_PS2_PACKETSIZE, enable_trackpoint },
{ MOUSE_MODEL_GENERIC,
0xc0, MOUSE_PS2_PACKETSIZE, NULL },
};
#define GENERIC_MOUSE_ENTRY (nitems(vendortype) - 1)
/* device driver declarateion */
static device_method_t psm_methods[] = {
/* Device interface */
DEVMETHOD(device_identify, psmidentify),
DEVMETHOD(device_probe, psmprobe),
DEVMETHOD(device_attach, psmattach),
DEVMETHOD(device_detach, psmdetach),
DEVMETHOD(device_resume, psmresume),
{ 0, 0 }
};
static driver_t psm_driver = {
PSM_DRIVER_NAME,
psm_methods,
sizeof(struct psm_softc),
};
static struct cdevsw psm_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = psm_cdev_open,
.d_close = psm_cdev_close,
.d_read = psmread,
.d_write = psmwrite,
.d_ioctl = psmioctl,
.d_poll = psmpoll,
.d_name = PSM_DRIVER_NAME,
};
#ifdef EVDEV_SUPPORT
static const struct evdev_methods psm_ev_methods_r = {
.ev_open = psm_ev_open_r,
.ev_close = psm_ev_close_r,
};
static const struct evdev_methods psm_ev_methods_a = {
.ev_open = psm_ev_open_a,
.ev_close = psm_ev_close_a,
};
#endif
/* device I/O routines */
static int
enable_aux_dev(KBDC kbdc)
{
int res;
res = send_aux_command(kbdc, PSMC_ENABLE_DEV);
VLOG(2, (LOG_DEBUG, "psm: ENABLE_DEV return code:%04x\n", res));
return (res == PSM_ACK);
}
static int
disable_aux_dev(KBDC kbdc)
{
int res;
res = send_aux_command(kbdc, PSMC_DISABLE_DEV);
VLOG(2, (LOG_DEBUG, "psm: DISABLE_DEV return code:%04x\n", res));
return (res == PSM_ACK);
}
static int
get_mouse_status(KBDC kbdc, int *status, int flag, int len)
{
int cmd;
int res;
int i;
switch (flag) {
case 0:
default:
cmd = PSMC_SEND_DEV_STATUS;
break;
case 1:
cmd = PSMC_SEND_DEV_DATA;
break;
}
empty_aux_buffer(kbdc, 5);
res = send_aux_command(kbdc, cmd);
VLOG(2, (LOG_DEBUG, "psm: SEND_AUX_DEV_%s return code:%04x\n",
(flag == 1) ? "DATA" : "STATUS", res));
if (res != PSM_ACK)
return (0);
for (i = 0; i < len; ++i) {
status[i] = read_aux_data(kbdc);
if (status[i] < 0)
break;
}
if (len >= 3) {
for (; i < 3; ++i)
status[i] = 0;
VLOG(1, (LOG_DEBUG, "psm: %s %02x %02x %02x\n",
(flag == 1) ? "data" : "status", status[0], status[1], status[2]));
}
return (i);
}
static int
get_aux_id(KBDC kbdc)
{
int res;
int id;
empty_aux_buffer(kbdc, 5);
res = send_aux_command(kbdc, PSMC_SEND_DEV_ID);
VLOG(2, (LOG_DEBUG, "psm: SEND_DEV_ID return code:%04x\n", res));
if (res != PSM_ACK)
return (-1);
/* 10ms delay */
DELAY(10000);
id = read_aux_data(kbdc);
VLOG(2, (LOG_DEBUG, "psm: device ID: %04x\n", id));
return (id);
}
static int
set_mouse_sampling_rate(KBDC kbdc, int rate)
{
int res;
res = send_aux_command_and_data(kbdc, PSMC_SET_SAMPLING_RATE, rate);
VLOG(2, (LOG_DEBUG, "psm: SET_SAMPLING_RATE (%d) %04x\n", rate, res));
return ((res == PSM_ACK) ? rate : -1);
}
static int
set_mouse_scaling(KBDC kbdc, int scale)
{
int res;
switch (scale) {
case 1:
default:
scale = PSMC_SET_SCALING11;
break;
case 2:
scale = PSMC_SET_SCALING21;
break;
}
res = send_aux_command(kbdc, scale);
VLOG(2, (LOG_DEBUG, "psm: SET_SCALING%s return code:%04x\n",
(scale == PSMC_SET_SCALING21) ? "21" : "11", res));
return (res == PSM_ACK);
}
/* `val' must be 0 through PSMD_MAX_RESOLUTION */
static int
set_mouse_resolution(KBDC kbdc, int val)
{
int res;
res = send_aux_command_and_data(kbdc, PSMC_SET_RESOLUTION, val);
VLOG(2, (LOG_DEBUG, "psm: SET_RESOLUTION (%d) %04x\n", val, res));
return ((res == PSM_ACK) ? val : -1);
}
/*
* NOTE: once `set_mouse_mode()' is called, the mouse device must be
* re-enabled by calling `enable_aux_dev()'
*/
static int
set_mouse_mode(KBDC kbdc)
{
int res;
res = send_aux_command(kbdc, PSMC_SET_STREAM_MODE);
VLOG(2, (LOG_DEBUG, "psm: SET_STREAM_MODE return code:%04x\n", res));
return (res == PSM_ACK);
}
static int
get_mouse_buttons(KBDC kbdc)
{
int c = 2; /* assume two buttons by default */
int status[3];
/*
* NOTE: a special sequence to obtain Logitech Mouse specific
* information: set resolution to 25 ppi, set scaling to 1:1, set
* scaling to 1:1, set scaling to 1:1. Then the second byte of the
* mouse status bytes is the number of available buttons.
* Some manufactures also support this sequence.
*/
if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
return (c);
if (set_mouse_scaling(kbdc, 1) && set_mouse_scaling(kbdc, 1) &&
set_mouse_scaling(kbdc, 1) &&
get_mouse_status(kbdc, status, 0, 3) >= 3 && status[1] != 0)
return (status[1]);
return (c);
}
/* misc subroutines */
/*
* Someday, I will get the complete list of valid pointing devices and
* their IDs... XXX
*/
static int
is_a_mouse(int id)
{
#if 0
static int valid_ids[] = {
PSM_MOUSE_ID, /* mouse */
PSM_BALLPOINT_ID, /* ballpoint device */
PSM_INTELLI_ID, /* Intellimouse */
PSM_EXPLORER_ID, /* Intellimouse Explorer */
-1 /* end of table */
};
int i;
for (i = 0; valid_ids[i] >= 0; ++i)
if (valid_ids[i] == id)
return (TRUE);
return (FALSE);
#else
return (TRUE);
#endif
}
static char *
model_name(int model)
{
static struct {
int model_code;
char *model_name;
} models[] = {
{ MOUSE_MODEL_NETSCROLL, "NetScroll" },
{ MOUSE_MODEL_NET, "NetMouse/NetScroll Optical" },
{ MOUSE_MODEL_GLIDEPOINT, "GlidePoint" },
{ MOUSE_MODEL_THINK, "ThinkingMouse" },
{ MOUSE_MODEL_INTELLI, "IntelliMouse" },
{ MOUSE_MODEL_MOUSEMANPLUS, "MouseMan+" },
{ MOUSE_MODEL_VERSAPAD, "VersaPad" },
{ MOUSE_MODEL_EXPLORER, "IntelliMouse Explorer" },
{ MOUSE_MODEL_4D, "4D Mouse" },
{ MOUSE_MODEL_4DPLUS, "4D+ Mouse" },
{ MOUSE_MODEL_SYNAPTICS, "Synaptics Touchpad" },
{ MOUSE_MODEL_TRACKPOINT, "IBM/Lenovo TrackPoint" },
{ MOUSE_MODEL_ELANTECH, "Elantech Touchpad" },
{ MOUSE_MODEL_GENERIC, "Generic PS/2 mouse" },
{ MOUSE_MODEL_UNKNOWN, "Unknown" },
};
int i;
for (i = 0; models[i].model_code != MOUSE_MODEL_UNKNOWN; ++i)
if (models[i].model_code == model)
break;
return (models[i].model_name);
}
static void
recover_from_error(KBDC kbdc)
{
/* discard anything left in the output buffer */
empty_both_buffers(kbdc, 10);
#if 0
/*
* NOTE: KBDC_RESET_KBD may not restore the communication between the
* keyboard and the controller.
*/
reset_kbd(kbdc);
#else
/*
* NOTE: somehow diagnostic and keyboard port test commands bring the
* keyboard back.
*/
if (!test_controller(kbdc))
log(LOG_ERR, "psm: keyboard controller failed.\n");
/* if there isn't a keyboard in the system, the following error is OK */
if (test_kbd_port(kbdc) != 0)
VLOG(1, (LOG_ERR, "psm: keyboard port failed.\n"));
#endif
}
static int
restore_controller(KBDC kbdc, int command_byte)
{
empty_both_buffers(kbdc, 10);
if (!set_controller_command_byte(kbdc, 0xff, command_byte)) {
log(LOG_ERR, "psm: failed to restore the keyboard controller "
"command byte.\n");
empty_both_buffers(kbdc, 10);
return (FALSE);
} else {
empty_both_buffers(kbdc, 10);
return (TRUE);
}
}
/*
* Re-initialize the aux port and device. The aux port must be enabled
* and its interrupt must be disabled before calling this routine.
* The aux device will be disabled before returning.
* The keyboard controller must be locked via `kbdc_lock()' before
* calling this routine.
*/
static int
doinitialize(struct psm_softc *sc, mousemode_t *mode)
{
KBDC kbdc = sc->kbdc;
int stat[3];
int i;
switch((i = test_aux_port(kbdc))) {
case 1: /* ignore these errors */
case 2:
case 3:
case PSM_ACK:
if (verbose)
log(LOG_DEBUG,
"psm%d: strange result for test aux port (%d).\n",
sc->unit, i);
/* FALLTHROUGH */
case 0: /* no error */
break;
case -1: /* time out */
default: /* error */
recover_from_error(kbdc);
if (sc->config & PSM_CONFIG_IGNPORTERROR)
break;
log(LOG_ERR, "psm%d: the aux port is not functioning (%d).\n",
sc->unit, i);
return (FALSE);
}
if (sc->config & PSM_CONFIG_NORESET) {
/*
* Don't try to reset the pointing device. It may possibly
* be left in the unknown state, though...
*/
} else {
/*
* NOTE: some controllers appears to hang the `keyboard' when
* the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
*/
if (!reset_aux_dev(kbdc)) {
recover_from_error(kbdc);
log(LOG_ERR, "psm%d: failed to reset the aux device.\n",
sc->unit);
return (FALSE);
}
}
/*
* both the aux port and the aux device is functioning, see
* if the device can be enabled.
*/
if (!enable_aux_dev(kbdc) || !disable_aux_dev(kbdc)) {
log(LOG_ERR, "psm%d: failed to enable the aux device.\n",
sc->unit);
return (FALSE);
}
empty_both_buffers(kbdc, 10); /* remove stray data if any */
/* Re-enable the mouse. */
for (i = 0; vendortype[i].probefunc != NULL; ++i)
if (vendortype[i].model == sc->hw.model)
(*vendortype[i].probefunc)(sc, REINIT);
/* set mouse parameters */
if (mode != (mousemode_t *)NULL) {
if (mode->rate > 0)
mode->rate = set_mouse_sampling_rate(kbdc, mode->rate);
if (mode->resolution >= 0)
mode->resolution =
set_mouse_resolution(kbdc, mode->resolution);
set_mouse_scaling(kbdc, 1);
set_mouse_mode(kbdc);
}
/* Record sync on the next data packet we see. */
sc->flags |= PSM_NEED_SYNCBITS;
/* just check the status of the mouse */
if (get_mouse_status(kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG, "psm%d: failed to get status (doinitialize).\n",
sc->unit);
return (TRUE);
}
static int
doopen(struct psm_softc *sc, int command_byte)
{
int stat[3];
int mux_enabled = FALSE;
/*
* FIXME: Synaptics TouchPad seems to go back to Relative Mode with
* no obvious reason. Thus we check the current mode and restore the
* Absolute Mode if it was cleared.
*
* The previous hack at the end of psmprobe() wasn't efficient when
* moused(8) was restarted.
*
* A Reset (FF) or Set Defaults (F6) command would clear the
* Absolute Mode bit. But a verbose boot or debug.psm.loglevel=5
* doesn't show any evidence of such a command.
*/
if (sc->hw.model == MOUSE_MODEL_SYNAPTICS) {
if (sc->muxport != PSM_NOMUX) {
mux_enabled = enable_aux_mux(sc->kbdc) >= 0;
if (mux_enabled)
set_active_aux_mux_port(sc->kbdc, sc->muxport);
else
log(LOG_ERR, "psm%d: failed to enable "
"active multiplexing mode.\n",
sc->unit);
}
mouse_ext_command(sc->kbdc, SYNAPTICS_READ_MODES);
get_mouse_status(sc->kbdc, stat, 0, 3);
if ((SYNAPTICS_VERSION_GE(sc->synhw, 7, 5) ||
stat[1] == 0x47) &&
stat[2] == 0x40) {
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
VLOG(5, (LOG_DEBUG, "psm%d: Synaptis Absolute Mode "
"hopefully restored\n",
sc->unit));
}
if (mux_enabled)
disable_aux_mux(sc->kbdc);
}
/*
* A user may want to disable tap and drag gestures on a Synaptics
* TouchPad when it operates in Relative Mode.
*/
if (sc->hw.model == MOUSE_MODEL_GENERIC) {
if (tap_enabled > 0) {
VLOG(2, (LOG_DEBUG,
"psm%d: enable tap and drag gestures\n",
sc->unit));
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
} else if (tap_enabled == 0) {
VLOG(2, (LOG_DEBUG,
"psm%d: disable tap and drag gestures\n",
sc->unit));
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
}
}
/* enable the mouse device */
if (!enable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR: failed to enable the mouse because:
* 1) the mouse is faulty,
* 2) the mouse has been removed(!?)
* In the latter case, the keyboard may have hung, and need
* recovery procedure...
*/
recover_from_error(sc->kbdc);
#if 0
/* FIXME: we could reset the mouse here and try to enable
* it again. But it will take long time and it's not a good
* idea to disable the keyboard that long...
*/
if (!doinitialize(sc, &sc->mode) || !enable_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
#else
{
#endif
restore_controller(sc->kbdc, command_byte);
/* mark this device is no longer available */
sc->state &= ~PSM_VALID;
log(LOG_ERR,
"psm%d: failed to enable the device (doopen).\n",
sc->unit);
return (EIO);
}
}
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG, "psm%d: failed to get status (doopen).\n",
sc->unit);
/* enable the aux port and interrupt */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_ENABLE_AUX_PORT | KBD_ENABLE_AUX_INT)) {
/* CONTROLLER ERROR */
disable_aux_dev(sc->kbdc);
restore_controller(sc->kbdc, command_byte);
log(LOG_ERR,
"psm%d: failed to enable the aux interrupt (doopen).\n",
sc->unit);
return (EIO);
}
/* start the watchdog timer */
sc->watchdog = FALSE;
callout_reset(&sc->callout, hz * 2, psmtimeout, sc);
return (0);
}
static int
reinitialize(struct psm_softc *sc, int doinit)
{
int err;
int c;
int s;
/* don't let anybody mess with the aux device */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
s = spltty();
/* block our watchdog timer */
sc->watchdog = FALSE;
callout_stop(&sc->callout);
/* save the current controller command byte */
empty_both_buffers(sc->kbdc, 10);
c = get_controller_command_byte(sc->kbdc);
VLOG(2, (LOG_DEBUG,
"psm%d: current command byte: %04x (reinitialize).\n",
sc->unit, c));
/* enable the aux port but disable the aux interrupt and the keyboard */
if ((c == -1) || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
splx(s);
kbdc_lock(sc->kbdc, FALSE);
log(LOG_ERR,
"psm%d: unable to set the command byte (reinitialize).\n",
sc->unit);
return (EIO);
}
/* flush any data */
if (sc->state & PSM_VALID) {
/* this may fail; but never mind... */
disable_aux_dev(sc->kbdc);
empty_aux_buffer(sc->kbdc, 10);
}
flushpackets(sc);
sc->syncerrors = 0;
sc->pkterrors = 0;
memset(&sc->lastinputerr, 0, sizeof(sc->lastinputerr));
/* try to detect the aux device; are you still there? */
err = 0;
if (doinit) {
if (doinitialize(sc, &sc->mode)) {
/* yes */
sc->state |= PSM_VALID;
} else {
/* the device has gone! */
restore_controller(sc->kbdc, c);
sc->state &= ~PSM_VALID;
log(LOG_ERR,
"psm%d: the aux device has gone! (reinitialize).\n",
sc->unit);
err = ENXIO;
}
}
splx(s);
/* restore the driver state */
if ((sc->state & (PSM_OPEN | PSM_EV_OPEN_R | PSM_EV_OPEN_A)) &&
(err == 0)) {
/* enable the aux device and the port again */
err = doopen(sc, c);
if (err != 0)
log(LOG_ERR, "psm%d: failed to enable the device "
"(reinitialize).\n", sc->unit);
} else {
/* restore the keyboard port and disable the aux port */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(c & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR */
log(LOG_ERR, "psm%d: failed to disable the aux port "
"(reinitialize).\n", sc->unit);
err = EIO;
}
}
kbdc_lock(sc->kbdc, FALSE);
return (err);
}
/* psm driver entry points */
static void
psmidentify(driver_t *driver, device_t parent)
{
device_t psmc;
device_t psm;
u_long irq;
int unit;
unit = device_get_unit(parent);
/* always add at least one child */
psm = BUS_ADD_CHILD(parent, KBDC_RID_AUX, driver->name, unit);
if (psm == NULL)
return;
irq = bus_get_resource_start(psm, SYS_RES_IRQ, KBDC_RID_AUX);
if (irq > 0)
return;
/*
* If the PS/2 mouse device has already been reported by ACPI or
* PnP BIOS, obtain the IRQ resource from it.
* (See psmcpnp_attach() below.)
*/
psmc = device_find_child(device_get_parent(parent),
PSMCPNP_DRIVER_NAME, unit);
if (psmc == NULL)
return;
irq = bus_get_resource_start(psmc, SYS_RES_IRQ, 0);
if (irq <= 0)
return;
bus_delete_resource(psmc, SYS_RES_IRQ, 0);
bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
}
#define endprobe(v) do { \
if (bootverbose) \
--verbose; \
kbdc_set_device_mask(sc->kbdc, mask); \
kbdc_lock(sc->kbdc, FALSE); \
return (v); \
} while (0)
static int
psmprobe(device_t dev)
{
int unit = device_get_unit(dev);
struct psm_softc *sc = device_get_softc(dev);
int stat[3];
int command_byte;
int mask;
int rid;
int i;
#if 0
kbdc_debug(TRUE);
#endif
/* see if IRQ is available */
rid = KBDC_RID_AUX;
sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
if (sc->intr == NULL) {
if (bootverbose)
device_printf(dev, "unable to allocate IRQ\n");
return (ENXIO);
}
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
sc->unit = unit;
sc->kbdc = atkbdc_open(device_get_unit(device_get_parent(dev)));
if (sc->kbdc == NULL)
return (ENXIO);
sc->config = device_get_flags(dev) & PSM_CONFIG_FLAGS;
/* XXX: for backward compatibility */
#if defined(PSM_HOOKRESUME) || defined(PSM_HOOKAPM)
sc->config |=
#ifdef PSM_RESETAFTERSUSPEND
PSM_CONFIG_INITAFTERSUSPEND;
#else
PSM_CONFIG_HOOKRESUME;
#endif
#endif /* PSM_HOOKRESUME | PSM_HOOKAPM */
sc->flags = 0;
sc->muxport = PSM_NOMUX;
if (bootverbose)
++verbose;
device_set_desc(dev, "PS/2 Mouse");
if (!kbdc_lock(sc->kbdc, TRUE)) {
printf("psm%d: unable to lock the controller.\n", unit);
if (bootverbose)
--verbose;
return (ENXIO);
}
/*
* NOTE: two bits in the command byte controls the operation of the
* aux port (mouse port): the aux port disable bit (bit 5) and the aux
* port interrupt (IRQ 12) enable bit (bit 2).
*/
/* discard anything left after the keyboard initialization */
empty_both_buffers(sc->kbdc, 10);
/* save the current command byte; it will be used later */
mask = kbdc_get_device_mask(sc->kbdc) & ~KBD_AUX_CONTROL_BITS;
command_byte = get_controller_command_byte(sc->kbdc);
if (verbose)
printf("psm%d: current command byte:%04x\n", unit,
command_byte);
if (command_byte == -1) {
/* CONTROLLER ERROR */
printf("psm%d: unable to get the current command byte value.\n",
unit);
endprobe(ENXIO);
}
/*
* disable the keyboard port while probing the aux port, which must be
* enabled during this routine
*/
if (!set_controller_command_byte(sc->kbdc,
KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* this is CONTROLLER ERROR; I don't know how to recover
* from this error...
*/
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
printf("psm%d: unable to set the command byte.\n", unit);
endprobe(ENXIO);
}
write_controller_command(sc->kbdc, KBDC_ENABLE_AUX_PORT);
/*
* NOTE: `test_aux_port()' is designed to return with zero if the aux
* port exists and is functioning. However, some controllers appears
* to respond with zero even when the aux port doesn't exist. (It may
* be that this is only the case when the controller DOES have the aux
* port but the port is not wired on the motherboard.) The keyboard
* controllers without the port, such as the original AT, are
* supposed to return with an error code or simply time out. In any
* case, we have to continue probing the port even when the controller
* passes this test.
*
* XXX: some controllers erroneously return the error code 1, 2 or 3
* when it has a perfectly functional aux port. We have to ignore
* this error code. Even if the controller HAS error with the aux
* port, it will be detected later...
* XXX: another incompatible controller returns PSM_ACK (0xfa)...
*/
switch ((i = test_aux_port(sc->kbdc))) {
case 1: /* ignore these errors */
case 2:
case 3:
case PSM_ACK:
if (verbose)
printf("psm%d: strange result for test aux port "
"(%d).\n", unit, i);
/* FALLTHROUGH */
case 0: /* no error */
break;
case -1: /* time out */
default: /* error */
recover_from_error(sc->kbdc);
if (sc->config & PSM_CONFIG_IGNPORTERROR)
break;
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: the aux port is not functioning (%d).\n",
unit, i);
endprobe(ENXIO);
}
if (sc->config & PSM_CONFIG_NORESET) {
/*
* Don't try to reset the pointing device. It may possibly be
* left in an unknown state, though...
*/
} else {
/*
* NOTE: some controllers appears to hang the `keyboard' when
* the aux port doesn't exist and `PSMC_RESET_DEV' is issued.
*
* Attempt to reset the controller twice -- this helps
* pierce through some KVM switches. The second reset
* is non-fatal.
*/
if (!reset_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: failed to reset the aux "
"device.\n", unit);
endprobe(ENXIO);
} else if (!reset_aux_dev(sc->kbdc)) {
recover_from_error(sc->kbdc);
if (verbose >= 2)
printf("psm%d: failed to reset the aux device "
"(2).\n", unit);
}
}
/*
* both the aux port and the aux device are functioning, see if the
* device can be enabled. NOTE: when enabled, the device will start
* sending data; we shall immediately disable the device once we know
* the device can be enabled.
*/
if (!enable_aux_dev(sc->kbdc) || !disable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR */
recover_from_error(sc->kbdc);
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: failed to enable the aux device.\n",
unit);
endprobe(ENXIO);
}
/* save the default values after reset */
if (get_mouse_status(sc->kbdc, stat, 0, 3) >= 3) {
sc->dflt_mode.rate = sc->mode.rate = stat[2];
sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
} else {
sc->dflt_mode.rate = sc->mode.rate = -1;
sc->dflt_mode.resolution = sc->mode.resolution = -1;
}
/* hardware information */
sc->hw.iftype = MOUSE_IF_PS2;
/* verify the device is a mouse */
sc->hw.hwid = get_aux_id(sc->kbdc);
if (!is_a_mouse(sc->hw.hwid)) {
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
if (verbose)
printf("psm%d: unknown device type (%d).\n", unit,
sc->hw.hwid);
endprobe(ENXIO);
}
switch (sc->hw.hwid) {
case PSM_BALLPOINT_ID:
sc->hw.type = MOUSE_TRACKBALL;
break;
case PSM_MOUSE_ID:
case PSM_INTELLI_ID:
case PSM_EXPLORER_ID:
case PSM_4DMOUSE_ID:
case PSM_4DPLUS_ID:
sc->hw.type = MOUSE_MOUSE;
break;
default:
sc->hw.type = MOUSE_UNKNOWN;
break;
}
if (sc->config & PSM_CONFIG_NOIDPROBE) {
sc->hw.buttons = 2;
i = GENERIC_MOUSE_ENTRY;
} else {
/* # of buttons */
sc->hw.buttons = get_mouse_buttons(sc->kbdc);
/* other parameters */
for (i = 0; vendortype[i].probefunc != NULL; ++i)
if ((*vendortype[i].probefunc)(sc, PROBE)) {
if (verbose >= 2)
printf("psm%d: found %s\n", unit,
model_name(vendortype[i].model));
break;
}
}
sc->hw.model = vendortype[i].model;
sc->dflt_mode.level = PSM_LEVEL_BASE;
sc->dflt_mode.packetsize = MOUSE_PS2_PACKETSIZE;
sc->dflt_mode.accelfactor = (sc->config & PSM_CONFIG_ACCEL) >> 4;
if (sc->config & PSM_CONFIG_NOCHECKSYNC)
sc->dflt_mode.syncmask[0] = 0;
else
sc->dflt_mode.syncmask[0] = vendortype[i].syncmask;
if (sc->config & PSM_CONFIG_FORCETAP)
sc->dflt_mode.syncmask[0] &= ~MOUSE_PS2_TAP;
sc->dflt_mode.syncmask[1] = 0; /* syncbits */
sc->mode = sc->dflt_mode;
sc->mode.packetsize = vendortype[i].packetsize;
/* set mouse parameters */
#if 0
/*
* A version of Logitech FirstMouse+ won't report wheel movement,
* if SET_DEFAULTS is sent... Don't use this command.
* This fix was found by Takashi Nishida.
*/
i = send_aux_command(sc->kbdc, PSMC_SET_DEFAULTS);
if (verbose >= 2)
printf("psm%d: SET_DEFAULTS return code:%04x\n", unit, i);
#endif
if (sc->config & PSM_CONFIG_RESOLUTION)
sc->mode.resolution =
set_mouse_resolution(sc->kbdc,
(sc->config & PSM_CONFIG_RESOLUTION) - 1);
else if (sc->mode.resolution >= 0)
sc->mode.resolution =
set_mouse_resolution(sc->kbdc, sc->dflt_mode.resolution);
if (sc->mode.rate > 0)
sc->mode.rate =
set_mouse_sampling_rate(sc->kbdc, sc->dflt_mode.rate);
set_mouse_scaling(sc->kbdc, 1);
/* Record sync on the next data packet we see. */
sc->flags |= PSM_NEED_SYNCBITS;
/* just check the status of the mouse */
/*
* NOTE: XXX there are some arcane controller/mouse combinations out
* there, which hung the controller unless there is data transmission
* after ACK from the mouse.
*/
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
printf("psm%d: failed to get status.\n", unit);
else {
/*
* When in its native mode, some mice operate with different
* default parameters than in the PS/2 compatible mode.
*/
sc->dflt_mode.rate = sc->mode.rate = stat[2];
sc->dflt_mode.resolution = sc->mode.resolution = stat[1];
}
/* disable the aux port for now... */
if (!set_controller_command_byte(sc->kbdc,
KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS,
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* this is CONTROLLER ERROR; I don't know the proper way to
* recover from this error...
*/
if (ALWAYS_RESTORE_CONTROLLER(sc->kbdc))
restore_controller(sc->kbdc, command_byte);
printf("psm%d: unable to set the command byte.\n", unit);
endprobe(ENXIO);
}
/* done */
kbdc_set_device_mask(sc->kbdc, mask | KBD_AUX_CONTROL_BITS);
kbdc_lock(sc->kbdc, FALSE);
return (0);
}
#ifdef EVDEV_SUPPORT
/* Values are taken from Linux drivers for userland software compatibility */
#define PS2_MOUSE_VENDOR 0x0002
#define PS2_MOUSE_GENERIC_PRODUCT 0x0001
#define PS2_MOUSE_SYNAPTICS_NAME "SynPS/2 Synaptics TouchPad"
#define PS2_MOUSE_SYNAPTICS_PRODUCT 0x0007
#define PS2_MOUSE_TRACKPOINT_NAME "TPPS/2 IBM TrackPoint"
#define PS2_MOUSE_TRACKPOINT_PRODUCT 0x000A
#define PS2_MOUSE_ELANTECH_NAME "ETPS/2 Elantech Touchpad"
#define PS2_MOUSE_ELANTECH_ST_NAME "ETPS/2 Elantech TrackPoint"
#define PS2_MOUSE_ELANTECH_PRODUCT 0x000E
#define ABSINFO_END { ABS_CNT, 0, 0, 0 }
static void
psm_support_abs_bulk(struct evdev_dev *evdev, const uint16_t info[][4])
{
size_t i;
for (i = 0; info[i][0] != ABS_CNT; i++)
evdev_support_abs(evdev, info[i][0], 0, info[i][1], info[i][2],
0, 0, info[i][3]);
}
static void
psm_push_mt_finger(struct psm_softc *sc, int id, const finger_t *f)
{
int y = sc->synhw.minimumYCoord + sc->synhw.maximumYCoord - f->y;
evdev_push_abs(sc->evdev_a, ABS_MT_SLOT, id);
evdev_push_abs(sc->evdev_a, ABS_MT_TRACKING_ID, id);
evdev_push_abs(sc->evdev_a, ABS_MT_POSITION_X, f->x);
evdev_push_abs(sc->evdev_a, ABS_MT_POSITION_Y, y);
evdev_push_abs(sc->evdev_a, ABS_MT_PRESSURE, f->p);
}
static void
psm_push_st_finger(struct psm_softc *sc, const finger_t *f)
{
int y = sc->synhw.minimumYCoord + sc->synhw.maximumYCoord - f->y;
evdev_push_abs(sc->evdev_a, ABS_X, f->x);
evdev_push_abs(sc->evdev_a, ABS_Y, y);
evdev_push_abs(sc->evdev_a, ABS_PRESSURE, f->p);
if (sc->synhw.capPalmDetect)
evdev_push_abs(sc->evdev_a, ABS_TOOL_WIDTH, f->w);
}
static void
psm_release_mt_slot(struct evdev_dev *evdev, int32_t slot)
{
evdev_push_abs(evdev, ABS_MT_SLOT, slot);
evdev_push_abs(evdev, ABS_MT_TRACKING_ID, -1);
}
static int
psm_register(device_t dev, int model_code)
{
struct psm_softc *sc = device_get_softc(dev);
struct evdev_dev *evdev_r;
int error, i, nbuttons, nwheels, product;
bool is_pointing_stick;
const char *name;
name = model_name(model_code);
nbuttons = sc->hw.buttons;
product = PS2_MOUSE_GENERIC_PRODUCT;
nwheels = 0;
is_pointing_stick = false;
switch (model_code) {
case MOUSE_MODEL_TRACKPOINT:
name = PS2_MOUSE_TRACKPOINT_NAME;
product = PS2_MOUSE_TRACKPOINT_PRODUCT;
nbuttons = 3;
is_pointing_stick = true;
break;
case MOUSE_MODEL_ELANTECH:
name = PS2_MOUSE_ELANTECH_ST_NAME;
product = PS2_MOUSE_ELANTECH_PRODUCT;
nbuttons = 3;
is_pointing_stick = true;
break;
case MOUSE_MODEL_MOUSEMANPLUS:
case MOUSE_MODEL_4D:
nwheels = 2;
break;
case MOUSE_MODEL_EXPLORER:
case MOUSE_MODEL_INTELLI:
case MOUSE_MODEL_NET:
case MOUSE_MODEL_NETSCROLL:
case MOUSE_MODEL_4DPLUS:
nwheels = 1;
break;
}
evdev_r = evdev_alloc();
evdev_set_name(evdev_r, name);
evdev_set_phys(evdev_r, device_get_nameunit(dev));
evdev_set_id(evdev_r, BUS_I8042, PS2_MOUSE_VENDOR, product, 0);
evdev_set_methods(evdev_r, sc, &psm_ev_methods_r);
evdev_support_prop(evdev_r, INPUT_PROP_POINTER);
if (is_pointing_stick)
evdev_support_prop(evdev_r, INPUT_PROP_POINTING_STICK);
evdev_support_event(evdev_r, EV_SYN);
evdev_support_event(evdev_r, EV_KEY);
evdev_support_event(evdev_r, EV_REL);
evdev_support_rel(evdev_r, REL_X);
evdev_support_rel(evdev_r, REL_Y);
switch (nwheels) {
case 2:
evdev_support_rel(evdev_r, REL_HWHEEL);
/* FALLTHROUGH */
case 1:
evdev_support_rel(evdev_r, REL_WHEEL);
}
for (i = 0; i < nbuttons; i++)
evdev_support_key(evdev_r, BTN_MOUSE + i);
error = evdev_register_mtx(evdev_r, &Giant);
if (error)
evdev_free(evdev_r);
else
sc->evdev_r = evdev_r;
return (error);
}
static int
psm_register_synaptics(device_t dev)
{
struct psm_softc *sc = device_get_softc(dev);
const uint16_t synaptics_absinfo_st[][4] = {
{ ABS_X, sc->synhw.minimumXCoord,
sc->synhw.maximumXCoord, sc->synhw.infoXupmm },
{ ABS_Y, sc->synhw.minimumYCoord,
sc->synhw.maximumYCoord, sc->synhw.infoYupmm },
{ ABS_PRESSURE, 0, ELANTECH_FINGER_MAX_P, 0 },
ABSINFO_END,
};
const uint16_t synaptics_absinfo_mt[][4] = {
{ ABS_MT_SLOT, 0, PSM_FINGERS-1, 0},
{ ABS_MT_TRACKING_ID, -1, PSM_FINGERS-1, 0},
{ ABS_MT_POSITION_X, sc->synhw.minimumXCoord,
sc->synhw.maximumXCoord, sc->synhw.infoXupmm },
{ ABS_MT_POSITION_Y, sc->synhw.minimumYCoord,
sc->synhw.maximumYCoord, sc->synhw.infoYupmm },
{ ABS_MT_PRESSURE, 0, ELANTECH_FINGER_MAX_P, 0 },
ABSINFO_END,
};
struct evdev_dev *evdev_a;
int error, i, guest_model;
evdev_a = evdev_alloc();
evdev_set_name(evdev_a, PS2_MOUSE_SYNAPTICS_NAME);
evdev_set_phys(evdev_a, device_get_nameunit(dev));
evdev_set_id(evdev_a, BUS_I8042, PS2_MOUSE_VENDOR,
PS2_MOUSE_SYNAPTICS_PRODUCT, 0);
evdev_set_methods(evdev_a, sc, &psm_ev_methods_a);
evdev_support_event(evdev_a, EV_SYN);
evdev_support_event(evdev_a, EV_KEY);
evdev_support_event(evdev_a, EV_ABS);
evdev_support_prop(evdev_a, INPUT_PROP_POINTER);
if (sc->synhw.capAdvancedGestures)
evdev_support_prop(evdev_a, INPUT_PROP_SEMI_MT);
if (sc->synhw.capClickPad)
evdev_support_prop(evdev_a, INPUT_PROP_BUTTONPAD);
if (sc->synhw.capClickPad && sc->synhw.topButtonPad)
evdev_support_prop(evdev_a, INPUT_PROP_TOPBUTTONPAD);
evdev_support_key(evdev_a, BTN_TOUCH);
evdev_support_nfingers(evdev_a, sc->synhw.capReportsV ? 5 : 3);
psm_support_abs_bulk(evdev_a, synaptics_absinfo_st);
if (sc->synhw.capAdvancedGestures || sc->synhw.capReportsV)
psm_support_abs_bulk(evdev_a, synaptics_absinfo_mt);
if (sc->synhw.capPalmDetect)
evdev_support_abs(evdev_a, ABS_TOOL_WIDTH, 0, 0, 15, 0, 0, 0);
evdev_support_key(evdev_a, BTN_LEFT);
if (!sc->synhw.capClickPad) {
evdev_support_key(evdev_a, BTN_RIGHT);
if (sc->synhw.capExtended && sc->synhw.capMiddle)
evdev_support_key(evdev_a, BTN_MIDDLE);
}
if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
evdev_support_key(evdev_a, BTN_BACK);
evdev_support_key(evdev_a, BTN_FORWARD);
}
if (sc->synhw.capExtended && (sc->synhw.nExtendedButtons > 0))
for (i = 0; i < sc->synhw.nExtendedButtons; i++)
evdev_support_key(evdev_a, BTN_0 + i);
error = evdev_register_mtx(evdev_a, &Giant);
if (!error && (sc->synhw.capPassthrough || sc->muxport != PSM_NOMUX)) {
guest_model = sc->tpinfo.sysctl_tree != NULL ?
MOUSE_MODEL_TRACKPOINT : MOUSE_MODEL_GENERIC;
error = psm_register(dev, guest_model);
}
if (error)
evdev_free(evdev_a);
else
sc->evdev_a = evdev_a;
return (error);
}
static int
psm_register_elantech(device_t dev)
{
struct psm_softc *sc = device_get_softc(dev);
const uint16_t elantech_absinfo[][4] = {
{ ABS_X, 0, sc->elanhw.sizex,
sc->elanhw.dpmmx },
{ ABS_Y, 0, sc->elanhw.sizey,
sc->elanhw.dpmmy },
{ ABS_PRESSURE, 0, ELANTECH_FINGER_MAX_P, 0 },
{ ABS_TOOL_WIDTH, 0, ELANTECH_FINGER_MAX_W, 0 },
{ ABS_MT_SLOT, 0, ELANTECH_MAX_FINGERS - 1, 0 },
{ ABS_MT_TRACKING_ID, -1, ELANTECH_MAX_FINGERS - 1, 0 },
{ ABS_MT_POSITION_X, 0, sc->elanhw.sizex,
sc->elanhw.dpmmx },
{ ABS_MT_POSITION_Y, 0, sc->elanhw.sizey,
sc->elanhw.dpmmy },
{ ABS_MT_PRESSURE, 0, ELANTECH_FINGER_MAX_P, 0 },
{ ABS_MT_TOUCH_MAJOR, 0, ELANTECH_FINGER_MAX_W *
sc->elanhw.dptracex, 0 },
ABSINFO_END,
};
struct evdev_dev *evdev_a;
int error;
evdev_a = evdev_alloc();
evdev_set_name(evdev_a, PS2_MOUSE_ELANTECH_NAME);
evdev_set_phys(evdev_a, device_get_nameunit(dev));
evdev_set_id(evdev_a, BUS_I8042, PS2_MOUSE_VENDOR,
PS2_MOUSE_ELANTECH_PRODUCT, 0);
evdev_set_methods(evdev_a, sc, &psm_ev_methods_a);
evdev_support_event(evdev_a, EV_SYN);
evdev_support_event(evdev_a, EV_KEY);
evdev_support_event(evdev_a, EV_ABS);
evdev_support_prop(evdev_a, INPUT_PROP_POINTER);
if (sc->elanhw.issemimt)
evdev_support_prop(evdev_a, INPUT_PROP_SEMI_MT);
if (sc->elanhw.isclickpad)
evdev_support_prop(evdev_a, INPUT_PROP_BUTTONPAD);
evdev_support_key(evdev_a, BTN_TOUCH);
evdev_support_nfingers(evdev_a, ELANTECH_MAX_FINGERS);
evdev_support_key(evdev_a, BTN_LEFT);
if (!sc->elanhw.isclickpad)
evdev_support_key(evdev_a, BTN_RIGHT);
psm_support_abs_bulk(evdev_a, elantech_absinfo);
error = evdev_register_mtx(evdev_a, &Giant);
if (!error && sc->elanhw.hastrackpoint)
error = psm_register(dev, MOUSE_MODEL_ELANTECH);
if (error)
evdev_free(evdev_a);
else
sc->evdev_a = evdev_a;
return (error);
}
#endif
static int
psmattach(device_t dev)
{
struct make_dev_args mda;
int unit = device_get_unit(dev);
struct psm_softc *sc = device_get_softc(dev);
int error;
int rid;
/* Setup initial state */
sc->state = PSM_VALID;
callout_init(&sc->callout, 0);
callout_init(&sc->softcallout, 0);
/* Setup our interrupt handler */
rid = KBDC_RID_AUX;
sc->intr = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
if (sc->intr == NULL)
return (ENXIO);
error = bus_setup_intr(dev, sc->intr, INTR_TYPE_TTY, NULL, psmintr, sc,
&sc->ih);
if (error)
goto out;
/* Done */
make_dev_args_init(&mda);
mda.mda_devsw = &psm_cdevsw;
mda.mda_mode = 0666;
mda.mda_si_drv1 = sc;
if ((error = make_dev_s(&mda, &sc->dev, "psm%d", unit)) != 0)
goto out;
if ((error = make_dev_s(&mda, &sc->bdev, "bpsm%d", unit)) != 0)
goto out;
#ifdef EVDEV_SUPPORT
switch (sc->hw.model) {
case MOUSE_MODEL_SYNAPTICS:
error = psm_register_synaptics(dev);
break;
case MOUSE_MODEL_ELANTECH:
error = psm_register_elantech(dev);
break;
default:
error = psm_register(dev, sc->hw.model);
}
if (error)
goto out;
#endif
/* Some touchpad devices need full reinitialization after suspend. */
switch (sc->hw.model) {
case MOUSE_MODEL_SYNAPTICS:
case MOUSE_MODEL_GLIDEPOINT:
case MOUSE_MODEL_VERSAPAD:
case MOUSE_MODEL_ELANTECH:
sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
break;
default:
if (sc->synhw.infoMajor >= 4 || sc->tphw > 0)
sc->config |= PSM_CONFIG_INITAFTERSUSPEND;
break;
}
/* Elantech trackpad`s sync bit differs from touchpad`s one */
if (sc->hw.model == MOUSE_MODEL_ELANTECH &&
(sc->elanhw.hascrc || sc->elanhw.hastrackpoint)) {
sc->config |= PSM_CONFIG_NOCHECKSYNC;
sc->flags &= ~PSM_NEED_SYNCBITS;
}
if (!verbose)
printf("psm%d: model %s, device ID %d\n",
unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff);
else {
printf("psm%d: model %s, device ID %d-%02x, %d buttons\n",
unit, model_name(sc->hw.model), sc->hw.hwid & 0x00ff,
sc->hw.hwid >> 8, sc->hw.buttons);
printf("psm%d: config:%08x, flags:%08x, packet size:%d\n",
unit, sc->config, sc->flags, sc->mode.packetsize);
printf("psm%d: syncmask:%02x, syncbits:%02x%s\n",
unit, sc->mode.syncmask[0], sc->mode.syncmask[1],
sc->config & PSM_CONFIG_NOCHECKSYNC ? " (sync not checked)" : "");
}
if (bootverbose)
--verbose;
out:
if (error != 0) {
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
if (sc->dev != NULL)
destroy_dev(sc->dev);
if (sc->bdev != NULL)
destroy_dev(sc->bdev);
}
return (error);
}
static int
psmdetach(device_t dev)
{
struct psm_softc *sc;
int rid;
sc = device_get_softc(dev);
if (sc->state & PSM_OPEN)
return (EBUSY);
#ifdef EVDEV_SUPPORT
evdev_free(sc->evdev_r);
evdev_free(sc->evdev_a);
#endif
rid = KBDC_RID_AUX;
bus_teardown_intr(dev, sc->intr, sc->ih);
bus_release_resource(dev, SYS_RES_IRQ, rid, sc->intr);
destroy_dev(sc->dev);
destroy_dev(sc->bdev);
callout_drain(&sc->callout);
callout_drain(&sc->softcallout);
return (0);
}
#ifdef EVDEV_SUPPORT
static int
psm_ev_open_r(struct evdev_dev *evdev)
{
struct psm_softc *sc = evdev_get_softc(evdev);
int err = 0;
/* Get device data */
if ((sc->state & PSM_VALID) == 0) {
/* the device is no longer valid/functioning */
return (ENXIO);
}
if (!(sc->state & (PSM_OPEN | PSM_EV_OPEN_A)))
err = psmopen(sc);
if (err == 0)
sc->state |= PSM_EV_OPEN_R;
return (err);
}
static int
psm_ev_close_r(struct evdev_dev *evdev)
{
struct psm_softc *sc = evdev_get_softc(evdev);
int err = 0;
sc->state &= ~PSM_EV_OPEN_R;
if (sc->state & (PSM_OPEN | PSM_EV_OPEN_A))
return (0);
if (sc->state & PSM_VALID)
err = psmclose(sc);
return (err);
}
static int
psm_ev_open_a(struct evdev_dev *evdev)
{
struct psm_softc *sc = evdev_get_softc(evdev);
int err = 0;
/* Get device data */
if ((sc->state & PSM_VALID) == 0) {
/* the device is no longer valid/functioning */
return (ENXIO);
}
if (!(sc->state & (PSM_OPEN | PSM_EV_OPEN_R)))
err = psmopen(sc);
if (err == 0)
sc->state |= PSM_EV_OPEN_A;
return (err);
}
static int
psm_ev_close_a(struct evdev_dev *evdev)
{
struct psm_softc *sc = evdev_get_softc(evdev);
int err = 0;
sc->state &= ~PSM_EV_OPEN_A;
if (sc->state & (PSM_OPEN | PSM_EV_OPEN_R))
return (0);
if (sc->state & PSM_VALID)
err = psmclose(sc);
return (err);
}
#endif
static int
psm_cdev_open(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct psm_softc *sc;
int err = 0;
/* Get device data */
sc = dev->si_drv1;
if ((sc == NULL) || (sc->state & PSM_VALID) == 0) {
/* the device is no longer valid/functioning */
return (ENXIO);
}
/* Disallow multiple opens */
if (sc->state & PSM_OPEN)
return (EBUSY);
device_busy(devclass_get_device(psm_devclass, sc->unit));
#ifdef EVDEV_SUPPORT
/* Already opened by evdev */
if (!(sc->state & (PSM_EV_OPEN_R | PSM_EV_OPEN_A)))
#endif
err = psmopen(sc);
if (err == 0)
sc->state |= PSM_OPEN;
else
device_unbusy(devclass_get_device(psm_devclass, sc->unit));
return (err);
}
static int
psm_cdev_close(struct cdev *dev, int flag, int fmt, struct thread *td)
{
struct psm_softc *sc;
int err = 0;
/* Get device data */
sc = dev->si_drv1;
if ((sc == NULL) || (sc->state & PSM_VALID) == 0) {
/* the device is no longer valid/functioning */
return (ENXIO);
}
#ifdef EVDEV_SUPPORT
/* Still opened by evdev */
if (!(sc->state & (PSM_EV_OPEN_R | PSM_EV_OPEN_A)))
#endif
err = psmclose(sc);
if (err == 0) {
sc->state &= ~PSM_OPEN;
/* clean up and sigio requests */
if (sc->async != NULL) {
funsetown(&sc->async);
sc->async = NULL;
}
device_unbusy(devclass_get_device(psm_devclass, sc->unit));
}
return (err);
}
static int
psmopen(struct psm_softc *sc)
{
int command_byte;
int err;
int s;
/* Initialize state */
sc->mode.level = sc->dflt_mode.level;
sc->mode.protocol = sc->dflt_mode.protocol;
sc->watchdog = FALSE;
sc->async = NULL;
/* flush the event queue */
sc->queue.count = 0;
sc->queue.head = 0;
sc->queue.tail = 0;
sc->status.flags = 0;
sc->status.button = 0;
sc->status.obutton = 0;
sc->status.dx = 0;
sc->status.dy = 0;
sc->status.dz = 0;
sc->button = 0;
sc->pqueue_start = 0;
sc->pqueue_end = 0;
/* empty input buffer */
flushpackets(sc);
sc->syncerrors = 0;
sc->pkterrors = 0;
/* don't let timeout routines in the keyboard driver to poll the kbdc */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
/* save the current controller command byte */
s = spltty();
command_byte = get_controller_command_byte(sc->kbdc);
/* enable the aux port and temporalily disable the keyboard */
if (command_byte == -1 || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* CONTROLLER ERROR; do you know how to get out of this? */
kbdc_lock(sc->kbdc, FALSE);
splx(s);
log(LOG_ERR,
"psm%d: unable to set the command byte (psmopen).\n",
sc->unit);
return (EIO);
}
/*
* Now that the keyboard controller is told not to generate
* the keyboard and mouse interrupts, call `splx()' to allow
* the other tty interrupts. The clock interrupt may also occur,
* but timeout routines will be blocked by the poll flag set
* via `kbdc_lock()'
*/
splx(s);
/* enable the mouse device */
err = doopen(sc, command_byte);
/* done */
kbdc_lock(sc->kbdc, FALSE);
return (err);
}
static int
psmclose(struct psm_softc *sc)
{
int stat[3];
int command_byte;
int s;
/* don't let timeout routines in the keyboard driver to poll the kbdc */
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
/* save the current controller command byte */
s = spltty();
command_byte = get_controller_command_byte(sc->kbdc);
if (command_byte == -1) {
kbdc_lock(sc->kbdc, FALSE);
splx(s);
return (EIO);
}
/* disable the aux interrupt and temporalily disable the keyboard */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
log(LOG_ERR,
"psm%d: failed to disable the aux int (psmclose).\n",
sc->unit);
/* CONTROLLER ERROR;
* NOTE: we shall force our way through. Because the only
* ill effect we shall see is that we may not be able
* to read ACK from the mouse, and it doesn't matter much
* so long as the mouse will accept the DISABLE command.
*/
}
splx(s);
/* stop the watchdog timer */
callout_stop(&sc->callout);
/* remove anything left in the output buffer */
empty_aux_buffer(sc->kbdc, 10);
/* disable the aux device, port and interrupt */
if (sc->state & PSM_VALID) {
if (!disable_aux_dev(sc->kbdc)) {
/* MOUSE ERROR;
* NOTE: we don't return (error) and continue,
* pretending we have successfully disabled the device.
* It's OK because the interrupt routine will discard
* any data from the mouse hereafter.
*/
log(LOG_ERR,
"psm%d: failed to disable the device (psmclose).\n",
sc->unit);
}
if (get_mouse_status(sc->kbdc, stat, 0, 3) < 3)
log(LOG_DEBUG,
"psm%d: failed to get status (psmclose).\n",
sc->unit);
}
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
(command_byte & KBD_KBD_CONTROL_BITS) |
KBD_DISABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/*
* CONTROLLER ERROR;
* we shall ignore this error; see the above comment.
*/
log(LOG_ERR,
"psm%d: failed to disable the aux port (psmclose).\n",
sc->unit);
}
/* remove anything left in the output buffer */
empty_aux_buffer(sc->kbdc, 10);
/* close is almost always successful */
kbdc_lock(sc->kbdc, FALSE);
return (0);
}
static int
tame_mouse(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *status,
u_char *buf)
{
static u_char butmapps2[8] = {
0,
MOUSE_PS2_BUTTON1DOWN,
MOUSE_PS2_BUTTON2DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN,
MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON2DOWN | MOUSE_PS2_BUTTON3DOWN,
MOUSE_PS2_BUTTON1DOWN | MOUSE_PS2_BUTTON2DOWN |
MOUSE_PS2_BUTTON3DOWN,
};
static u_char butmapmsc[8] = {
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP |
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON1UP,
0,
};
int mapped;
int i;
if (sc->mode.level == PSM_LEVEL_BASE) {
mapped = status->button & ~MOUSE_BUTTON4DOWN;
if (status->button & MOUSE_BUTTON4DOWN)
mapped |= MOUSE_BUTTON1DOWN;
status->button = mapped;
buf[0] = MOUSE_PS2_SYNC | butmapps2[mapped & MOUSE_STDBUTTONS];
i = imax(imin(status->dx, 255), -256);
if (i < 0)
buf[0] |= MOUSE_PS2_XNEG;
buf[1] = i;
i = imax(imin(status->dy, 255), -256);
if (i < 0)
buf[0] |= MOUSE_PS2_YNEG;
buf[2] = i;
return (MOUSE_PS2_PACKETSIZE);
} else if (sc->mode.level == PSM_LEVEL_STANDARD) {
buf[0] = MOUSE_MSC_SYNC |
butmapmsc[status->button & MOUSE_STDBUTTONS];
i = imax(imin(status->dx, 255), -256);
buf[1] = i >> 1;
buf[3] = i - buf[1];
i = imax(imin(status->dy, 255), -256);
buf[2] = i >> 1;
buf[4] = i - buf[2];
i = imax(imin(status->dz, 127), -128);
buf[5] = (i >> 1) & 0x7f;
buf[6] = (i - (i >> 1)) & 0x7f;
buf[7] = (~status->button >> 3) & 0x7f;
return (MOUSE_SYS_PACKETSIZE);
}
return (pb->inputbytes);
}
static int
psmread(struct cdev *dev, struct uio *uio, int flag)
{
struct psm_softc *sc = dev->si_drv1;
u_char buf[PSM_SMALLBUFSIZE];
int error = 0;
int s;
int l;
if ((sc->state & PSM_VALID) == 0)
return (EIO);
/* block until mouse activity occurred */
s = spltty();
while (sc->queue.count <= 0) {
if (dev != sc->bdev) {
splx(s);
return (EWOULDBLOCK);
}
sc->state |= PSM_ASLP;
error = tsleep(sc, PZERO | PCATCH, "psmrea", 0);
sc->state &= ~PSM_ASLP;
if (error) {
splx(s);
return (error);
} else if ((sc->state & PSM_VALID) == 0) {
/* the device disappeared! */
splx(s);
return (EIO);
}
}
splx(s);
/* copy data to the user land */
while ((sc->queue.count > 0) && (uio->uio_resid > 0)) {
s = spltty();
l = imin(sc->queue.count, uio->uio_resid);
if (l > sizeof(buf))
l = sizeof(buf);
if (l > sizeof(sc->queue.buf) - sc->queue.head) {
bcopy(&sc->queue.buf[sc->queue.head], &buf[0],
sizeof(sc->queue.buf) - sc->queue.head);
bcopy(&sc->queue.buf[0],
&buf[sizeof(sc->queue.buf) - sc->queue.head],
l - (sizeof(sc->queue.buf) - sc->queue.head));
} else
bcopy(&sc->queue.buf[sc->queue.head], &buf[0], l);
sc->queue.count -= l;
sc->queue.head = (sc->queue.head + l) % sizeof(sc->queue.buf);
splx(s);
error = uiomove(buf, l, uio);
if (error)
break;
}
return (error);
}
static int
block_mouse_data(struct psm_softc *sc, int *c)
{
int s;
if (!kbdc_lock(sc->kbdc, TRUE))
return (EIO);
s = spltty();
*c = get_controller_command_byte(sc->kbdc);
if ((*c == -1) || !set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
KBD_DISABLE_KBD_PORT | KBD_DISABLE_KBD_INT |
KBD_ENABLE_AUX_PORT | KBD_DISABLE_AUX_INT)) {
/* this is CONTROLLER ERROR */
splx(s);
kbdc_lock(sc->kbdc, FALSE);
return (EIO);
}
/*
* The device may be in the middle of status data transmission.
* The transmission will be interrupted, thus, incomplete status
* data must be discarded. Although the aux interrupt is disabled
* at the keyboard controller level, at most one aux interrupt
* may have already been pending and a data byte is in the
* output buffer; throw it away. Note that the second argument
* to `empty_aux_buffer()' is zero, so that the call will just
* flush the internal queue.
* `psmintr()' will be invoked after `splx()' if an interrupt is
* pending; it will see no data and returns immediately.
*/
empty_aux_buffer(sc->kbdc, 0); /* flush the queue */
read_aux_data_no_wait(sc->kbdc); /* throw away data if any */
flushpackets(sc);
splx(s);
return (0);
}
static void
dropqueue(struct psm_softc *sc)
{
sc->queue.count = 0;
sc->queue.head = 0;
sc->queue.tail = 0;
if ((sc->state & PSM_SOFTARMED) != 0) {
sc->state &= ~PSM_SOFTARMED;
callout_stop(&sc->softcallout);
}
sc->pqueue_start = sc->pqueue_end;
}
static void
flushpackets(struct psm_softc *sc)
{
dropqueue(sc);
bzero(&sc->pqueue, sizeof(sc->pqueue));
}
static int
unblock_mouse_data(struct psm_softc *sc, int c)
{
int error = 0;
/*
* We may have seen a part of status data during `set_mouse_XXX()'.
* they have been queued; flush it.
*/
empty_aux_buffer(sc->kbdc, 0);
/* restore ports and interrupt */
if (!set_controller_command_byte(sc->kbdc,
kbdc_get_device_mask(sc->kbdc),
c & (KBD_KBD_CONTROL_BITS | KBD_AUX_CONTROL_BITS))) {
/*
* CONTROLLER ERROR; this is serious, we may have
* been left with the inaccessible keyboard and
* the disabled mouse interrupt.
*/
error = EIO;
}
kbdc_lock(sc->kbdc, FALSE);
return (error);
}
static int
psmwrite(struct cdev *dev, struct uio *uio, int flag)
{
struct psm_softc *sc = dev->si_drv1;
u_char buf[PSM_SMALLBUFSIZE];
int error = 0, i, l;
if ((sc->state & PSM_VALID) == 0)
return (EIO);
if (sc->mode.level < PSM_LEVEL_NATIVE)
return (ENODEV);
/* copy data from the user land */
while (uio->uio_resid > 0) {
l = imin(PSM_SMALLBUFSIZE, uio->uio_resid);
error = uiomove(buf, l, uio);
if (error)
break;
for (i = 0; i < l; i++) {
VLOG(4, (LOG_DEBUG, "psm: cmd 0x%x\n", buf[i]));
if (!write_aux_command(sc->kbdc, buf[i])) {
VLOG(2, (LOG_DEBUG,
"psm: cmd 0x%x failed.\n", buf[i]));
return (reinitialize(sc, FALSE));
}
}
}
return (error);
}
static int
psmioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
struct thread *td)
{
struct psm_softc *sc = dev->si_drv1;
mousemode_t mode;
mousestatus_t status;
mousedata_t *data;
int stat[3];
int command_byte;
int error = 0;
int s;
/* Perform IOCTL command */
switch (cmd) {
case OLD_MOUSE_GETHWINFO:
s = spltty();
((old_mousehw_t *)addr)->buttons = sc->hw.buttons;
((old_mousehw_t *)addr)->iftype = sc->hw.iftype;
((old_mousehw_t *)addr)->type = sc->hw.type;
((old_mousehw_t *)addr)->hwid = sc->hw.hwid & 0x00ff;
splx(s);
break;
case MOUSE_GETHWINFO:
s = spltty();
*(mousehw_t *)addr = sc->hw;
if (sc->mode.level == PSM_LEVEL_BASE)
((mousehw_t *)addr)->model = MOUSE_MODEL_GENERIC;
splx(s);
break;
case MOUSE_SYN_GETHWINFO:
s = spltty();
if (sc->synhw.infoMajor >= 4)
*(synapticshw_t *)addr = sc->synhw;
else
error = EINVAL;
splx(s);
break;
case OLD_MOUSE_GETMODE:
s = spltty();
switch (sc->mode.level) {
case PSM_LEVEL_BASE:
((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
case PSM_LEVEL_STANDARD:
((old_mousemode_t *)addr)->protocol =
MOUSE_PROTO_SYSMOUSE;
break;
case PSM_LEVEL_NATIVE:
((old_mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
}
((old_mousemode_t *)addr)->rate = sc->mode.rate;
((old_mousemode_t *)addr)->resolution = sc->mode.resolution;
((old_mousemode_t *)addr)->accelfactor = sc->mode.accelfactor;
splx(s);
break;
case MOUSE_GETMODE:
s = spltty();
*(mousemode_t *)addr = sc->mode;
if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
((mousemode_t *)addr)->syncmask[0] = 0;
((mousemode_t *)addr)->syncmask[1] = 0;
}
((mousemode_t *)addr)->resolution =
MOUSE_RES_LOW - sc->mode.resolution;
switch (sc->mode.level) {
case PSM_LEVEL_BASE:
((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
((mousemode_t *)addr)->packetsize =
MOUSE_PS2_PACKETSIZE;
break;
case PSM_LEVEL_STANDARD:
((mousemode_t *)addr)->protocol = MOUSE_PROTO_SYSMOUSE;
((mousemode_t *)addr)->packetsize =
MOUSE_SYS_PACKETSIZE;
((mousemode_t *)addr)->syncmask[0] = MOUSE_SYS_SYNCMASK;
((mousemode_t *)addr)->syncmask[1] = MOUSE_SYS_SYNC;
break;
case PSM_LEVEL_NATIVE:
/* FIXME: this isn't quite correct... XXX */
((mousemode_t *)addr)->protocol = MOUSE_PROTO_PS2;
break;
}
splx(s);
break;
case OLD_MOUSE_SETMODE:
case MOUSE_SETMODE:
if (cmd == OLD_MOUSE_SETMODE) {
mode.rate = ((old_mousemode_t *)addr)->rate;
/*
* resolution old I/F new I/F
* default 0 0
* low 1 -2
* medium low 2 -3
* medium high 3 -4
* high 4 -5
*/
if (((old_mousemode_t *)addr)->resolution > 0)
mode.resolution =
-((old_mousemode_t *)addr)->resolution - 1;
else
mode.resolution = 0;
mode.accelfactor =
((old_mousemode_t *)addr)->accelfactor;
mode.level = -1;
} else
mode = *(mousemode_t *)addr;
/* adjust and validate parameters. */
if (mode.rate > UCHAR_MAX)
return (EINVAL);
if (mode.rate == 0)
mode.rate = sc->dflt_mode.rate;
else if (mode.rate == -1)
/* don't change the current setting */
;
else if (mode.rate < 0)
return (EINVAL);
if (mode.resolution >= UCHAR_MAX)
return (EINVAL);
if (mode.resolution >= 200)
mode.resolution = MOUSE_RES_HIGH;
else if (mode.resolution >= 100)
mode.resolution = MOUSE_RES_MEDIUMHIGH;
else if (mode.resolution >= 50)
mode.resolution = MOUSE_RES_MEDIUMLOW;
else if (mode.resolution > 0)
mode.resolution = MOUSE_RES_LOW;
if (mode.resolution == MOUSE_RES_DEFAULT)
mode.resolution = sc->dflt_mode.resolution;
else if (mode.resolution == -1)
/* don't change the current setting */
;
else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
mode.resolution = MOUSE_RES_LOW - mode.resolution;
if (mode.level == -1)
/* don't change the current setting */
mode.level = sc->mode.level;
else if ((mode.level < PSM_LEVEL_MIN) ||
(mode.level > PSM_LEVEL_MAX))
return (EINVAL);
if (mode.accelfactor == -1)
/* don't change the current setting */
mode.accelfactor = sc->mode.accelfactor;
else if (mode.accelfactor < 0)
return (EINVAL);
/* don't allow anybody to poll the keyboard controller */
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
/* set mouse parameters */
if (mode.rate > 0)
mode.rate = set_mouse_sampling_rate(sc->kbdc,
mode.rate);
if (mode.resolution >= 0)
mode.resolution =
set_mouse_resolution(sc->kbdc, mode.resolution);
set_mouse_scaling(sc->kbdc, 1);
get_mouse_status(sc->kbdc, stat, 0, 3);
s = spltty();
sc->mode.rate = mode.rate;
sc->mode.resolution = mode.resolution;
sc->mode.accelfactor = mode.accelfactor;
sc->mode.level = mode.level;
splx(s);
unblock_mouse_data(sc, command_byte);
break;
case MOUSE_GETLEVEL:
*(int *)addr = sc->mode.level;
break;
case MOUSE_SETLEVEL:
if ((*(int *)addr < PSM_LEVEL_MIN) ||
(*(int *)addr > PSM_LEVEL_MAX))
return (EINVAL);
sc->mode.level = *(int *)addr;
break;
case MOUSE_GETSTATUS:
s = spltty();
status = sc->status;
sc->status.flags = 0;
sc->status.obutton = sc->status.button;
sc->status.button = 0;
sc->status.dx = 0;
sc->status.dy = 0;
sc->status.dz = 0;
splx(s);
*(mousestatus_t *)addr = status;
break;
case MOUSE_READSTATE:
case MOUSE_READDATA:
data = (mousedata_t *)addr;
if (data->len > sizeof(data->buf)/sizeof(data->buf[0]))
return (EINVAL);
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
if ((data->len = get_mouse_status(sc->kbdc, data->buf,
(cmd == MOUSE_READDATA) ? 1 : 0, data->len)) <= 0)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#if (defined(MOUSE_SETRESOLUTION))
case MOUSE_SETRESOLUTION:
mode.resolution = *(int *)addr;
if (mode.resolution >= UCHAR_MAX)
return (EINVAL);
else if (mode.resolution >= 200)
mode.resolution = MOUSE_RES_HIGH;
else if (mode.resolution >= 100)
mode.resolution = MOUSE_RES_MEDIUMHIGH;
else if (mode.resolution >= 50)
mode.resolution = MOUSE_RES_MEDIUMLOW;
else if (mode.resolution > 0)
mode.resolution = MOUSE_RES_LOW;
if (mode.resolution == MOUSE_RES_DEFAULT)
mode.resolution = sc->dflt_mode.resolution;
else if (mode.resolution == -1)
mode.resolution = sc->mode.resolution;
else if (mode.resolution < 0) /* MOUSE_RES_LOW/MEDIUM/HIGH */
mode.resolution = MOUSE_RES_LOW - mode.resolution;
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->mode.resolution =
set_mouse_resolution(sc->kbdc, mode.resolution);
if (sc->mode.resolution != mode.resolution)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_SETRESOLUTION */
#if (defined(MOUSE_SETRATE))
case MOUSE_SETRATE:
mode.rate = *(int *)addr;
if (mode.rate > UCHAR_MAX)
return (EINVAL);
if (mode.rate == 0)
mode.rate = sc->dflt_mode.rate;
else if (mode.rate < 0)
mode.rate = sc->mode.rate;
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->mode.rate = set_mouse_sampling_rate(sc->kbdc, mode.rate);
if (sc->mode.rate != mode.rate)
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_SETRATE */
#if (defined(MOUSE_SETSCALING))
case MOUSE_SETSCALING:
if ((*(int *)addr <= 0) || (*(int *)addr > 2))
return (EINVAL);
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
if (!set_mouse_scaling(sc->kbdc, *(int *)addr))
error = EIO;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_SETSCALING */
#if (defined(MOUSE_GETHWID))
case MOUSE_GETHWID:
error = block_mouse_data(sc, &command_byte);
if (error)
return (error);
sc->hw.hwid &= ~0x00ff;
sc->hw.hwid |= get_aux_id(sc->kbdc);
*(int *)addr = sc->hw.hwid & 0x00ff;
unblock_mouse_data(sc, command_byte);
break;
#endif /* MOUSE_GETHWID */
case FIONBIO:
case FIOASYNC:
break;
case FIOSETOWN:
error = fsetown(*(int *)addr, &sc->async);
break;
case FIOGETOWN:
*(int *) addr = fgetown(&sc->async);
break;
default:
return (ENOTTY);
}
return (error);
}
static void
psmtimeout(void *arg)
{
struct psm_softc *sc;
int s;
sc = (struct psm_softc *)arg;
s = spltty();
if (sc->watchdog && kbdc_lock(sc->kbdc, TRUE)) {
VLOG(6, (LOG_DEBUG, "psm%d: lost interrupt?\n", sc->unit));
psmintr(sc);
kbdc_lock(sc->kbdc, FALSE);
}
sc->watchdog = TRUE;
splx(s);
callout_reset(&sc->callout, hz, psmtimeout, sc);
}
/* Add all sysctls under the debug.psm and hw.psm nodes */
static SYSCTL_NODE(_debug, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
static SYSCTL_NODE(_hw, OID_AUTO, psm, CTLFLAG_RD, 0, "ps/2 mouse");
SYSCTL_INT(_debug_psm, OID_AUTO, loglevel, CTLFLAG_RWTUN, &verbose, 0,
"Verbosity level");
static int psmhz = 20;
SYSCTL_INT(_debug_psm, OID_AUTO, hz, CTLFLAG_RW, &psmhz, 0,
"Frequency of the softcallout (in hz)");
static int psmerrsecs = 2;
SYSCTL_INT(_debug_psm, OID_AUTO, errsecs, CTLFLAG_RW, &psmerrsecs, 0,
"Number of seconds during which packets will dropped after a sync error");
static int psmerrusecs = 0;
SYSCTL_INT(_debug_psm, OID_AUTO, errusecs, CTLFLAG_RW, &psmerrusecs, 0,
"Microseconds to add to psmerrsecs");
static int psmsecs = 0;
SYSCTL_INT(_debug_psm, OID_AUTO, secs, CTLFLAG_RW, &psmsecs, 0,
"Max number of seconds between soft interrupts");
static int psmusecs = 500000;
SYSCTL_INT(_debug_psm, OID_AUTO, usecs, CTLFLAG_RW, &psmusecs, 0,
"Microseconds to add to psmsecs");
static int pkterrthresh = 2;
SYSCTL_INT(_debug_psm, OID_AUTO, pkterrthresh, CTLFLAG_RW, &pkterrthresh, 0,
"Number of error packets allowed before reinitializing the mouse");
SYSCTL_INT(_hw_psm, OID_AUTO, tap_enabled, CTLFLAG_RWTUN, &tap_enabled, 0,
"Enable tap and drag gestures");
static int tap_threshold = PSM_TAP_THRESHOLD;
SYSCTL_INT(_hw_psm, OID_AUTO, tap_threshold, CTLFLAG_RW, &tap_threshold, 0,
"Button tap threshold");
static int tap_timeout = PSM_TAP_TIMEOUT;
SYSCTL_INT(_hw_psm, OID_AUTO, tap_timeout, CTLFLAG_RW, &tap_timeout, 0,
"Tap timeout for touchpads");
/* Tunables */
SYSCTL_INT(_hw_psm, OID_AUTO, synaptics_support, CTLFLAG_RDTUN,
&synaptics_support, 0, "Enable support for Synaptics touchpads");
SYSCTL_INT(_hw_psm, OID_AUTO, trackpoint_support, CTLFLAG_RDTUN,
&trackpoint_support, 0, "Enable support for IBM/Lenovo TrackPoint");
SYSCTL_INT(_hw_psm, OID_AUTO, elantech_support, CTLFLAG_RDTUN,
&elantech_support, 0, "Enable support for Elantech touchpads");
static void
psmintr(void *arg)
{
struct psm_softc *sc = arg;
struct timeval now;
int c;
packetbuf_t *pb;
if (aux_mux_is_enabled(sc->kbdc))
VLOG(2, (LOG_DEBUG, "psmintr: active multiplexing mode is not "
"supported!\n"));
/* read until there is nothing to read */
while((c = read_aux_data_no_wait(sc->kbdc)) != -1) {
pb = &sc->pqueue[sc->pqueue_end];
/* discard the byte if the device is not open */
if (!(sc->state & (PSM_OPEN | PSM_EV_OPEN_R | PSM_EV_OPEN_A)))
continue;
getmicrouptime(&now);
if ((pb->inputbytes > 0) &&
timevalcmp(&now, &sc->inputtimeout, >)) {
VLOG(3, (LOG_DEBUG, "psmintr: delay too long; "
"resetting byte count\n"));
pb->inputbytes = 0;
sc->syncerrors = 0;
sc->pkterrors = 0;
}
sc->inputtimeout.tv_sec = PSM_INPUT_TIMEOUT / 1000000;
sc->inputtimeout.tv_usec = PSM_INPUT_TIMEOUT % 1000000;
timevaladd(&sc->inputtimeout, &now);
pb->ipacket[pb->inputbytes++] = c;
if (sc->mode.level == PSM_LEVEL_NATIVE) {
VLOG(4, (LOG_DEBUG, "psmintr: %02x\n", pb->ipacket[0]));
sc->syncerrors = 0;
sc->pkterrors = 0;
goto next;
} else {
if (pb->inputbytes < sc->mode.packetsize)
continue;
VLOG(4, (LOG_DEBUG,
"psmintr: %02x %02x %02x %02x %02x %02x\n",
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
}
c = pb->ipacket[0];
if ((sc->flags & PSM_NEED_SYNCBITS) != 0) {
sc->mode.syncmask[1] = (c & sc->mode.syncmask[0]);
sc->flags &= ~PSM_NEED_SYNCBITS;
VLOG(2, (LOG_DEBUG,
"psmintr: Sync bytes now %04x,%04x\n",
sc->mode.syncmask[0], sc->mode.syncmask[1]));
} else if ((sc->config & PSM_CONFIG_NOCHECKSYNC) == 0 &&
(c & sc->mode.syncmask[0]) != sc->mode.syncmask[1]) {
VLOG(3, (LOG_DEBUG, "psmintr: out of sync "
"(%04x != %04x) %d cmds since last error.\n",
c & sc->mode.syncmask[0], sc->mode.syncmask[1],
sc->cmdcount - sc->lasterr));
sc->lasterr = sc->cmdcount;
/*
* The sync byte test is a weak measure of packet
* validity. Conservatively discard any input yet
* to be seen by userland when we detect a sync
* error since there is a good chance some of
* the queued packets have undetected errors.
*/
dropqueue(sc);
if (sc->syncerrors == 0)
sc->pkterrors++;
++sc->syncerrors;
sc->lastinputerr = now;
if (sc->syncerrors >= sc->mode.packetsize * 2 ||
sc->pkterrors >= pkterrthresh) {
/*
* If we've failed to find a single sync byte
* in 2 packets worth of data, or we've seen
* persistent packet errors during the
* validation period, reinitialize the mouse
* in hopes of returning it to the expected
* mode.
*/
VLOG(3, (LOG_DEBUG,
"psmintr: reset the mouse.\n"));
reinitialize(sc, TRUE);
} else if (sc->syncerrors == sc->mode.packetsize) {
/*
* Try a soft reset after searching for a sync
* byte through a packet length of bytes.
*/
VLOG(3, (LOG_DEBUG,
"psmintr: re-enable the mouse.\n"));
pb->inputbytes = 0;
disable_aux_dev(sc->kbdc);
enable_aux_dev(sc->kbdc);
} else {
VLOG(3, (LOG_DEBUG,
"psmintr: discard a byte (%d)\n",
sc->syncerrors));
pb->inputbytes--;
bcopy(&pb->ipacket[1], &pb->ipacket[0],
pb->inputbytes);
}
continue;
}
/*
* We have what appears to be a valid packet.
* Reset the error counters.
*/
sc->syncerrors = 0;
/*
* Drop even good packets if they occur within a timeout
* period of a sync error. This allows the detection of
* a change in the mouse's packet mode without exposing
* erratic mouse behavior to the user. Some KVMs forget
* enhanced mouse modes during switch events.
*/
if (!timeelapsed(&sc->lastinputerr, psmerrsecs, psmerrusecs,
&now)) {
pb->inputbytes = 0;
continue;
}
/*
* Now that we're out of the validation period, reset
* the packet error count.
*/
sc->pkterrors = 0;
sc->cmdcount++;
next:
if (++sc->pqueue_end >= PSM_PACKETQUEUE)
sc->pqueue_end = 0;
/*
* If we've filled the queue then call the softintr ourselves,
* otherwise schedule the interrupt for later.
*/
if (!timeelapsed(&sc->lastsoftintr, psmsecs, psmusecs, &now) ||
(sc->pqueue_end == sc->pqueue_start)) {
if ((sc->state & PSM_SOFTARMED) != 0) {
sc->state &= ~PSM_SOFTARMED;
callout_stop(&sc->softcallout);
}
psmsoftintr(arg);
} else if ((sc->state & PSM_SOFTARMED) == 0) {
sc->state |= PSM_SOFTARMED;
callout_reset(&sc->softcallout,
psmhz < 1 ? 1 : (hz/psmhz), psmsoftintr, arg);
}
}
}
static void
proc_mmanplus(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
/*
* PS2++ protocol packet
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: * 1 p3 p2 1 * * *
* byte 2: c1 c2 p1 p0 d1 d0 1 0
*
* p3-p0: packet type
* c1, c2: c1 & c2 == 1, if p2 == 0
* c1 & c2 == 0, if p2 == 1
*
* packet type: 0 (device type)
* See comments in enable_mmanplus() below.
*
* packet type: 1 (wheel data)
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 3: h * B5 B4 s d2 d1 d0
*
* h: 1, if horizontal roller data
* 0, if vertical roller data
* B4, B5: button 4 and 5
* s: sign bit
* d2-d0: roller data
*
* packet type: 2 (reserved)
*/
if (((pb->ipacket[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) &&
(abs(*x) > 191) && MOUSE_PS2PLUS_CHECKBITS(pb->ipacket)) {
/*
* the extended data packet encodes button
* and wheel events
*/
switch (MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket)) {
case 1:
/* wheel data packet */
*x = *y = 0;
if (pb->ipacket[2] & 0x80) {
/* XXX horizontal roller count - ignore it */
;
} else {
/* vertical roller count */
*z = (pb->ipacket[2] & MOUSE_PS2PLUS_ZNEG) ?
(pb->ipacket[2] & 0x0f) - 16 :
(pb->ipacket[2] & 0x0f);
}
ms->button |= (pb->ipacket[2] &
MOUSE_PS2PLUS_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms->button |= (pb->ipacket[2] &
MOUSE_PS2PLUS_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case 2:
/*
* this packet type is reserved by
* Logitech...
*/
/*
* IBM ScrollPoint Mouse uses this
* packet type to encode both vertical
* and horizontal scroll movement.
*/
*x = *y = 0;
/* horizontal count */
if (pb->ipacket[2] & 0x0f)
*z = (pb->ipacket[2] & MOUSE_SPOINT_WNEG) ?
-2 : 2;
/* vertical count */
if (pb->ipacket[2] & 0xf0)
*z = (pb->ipacket[2] & MOUSE_SPOINT_ZNEG) ?
-1 : 1;
break;
case 0:
/* device type packet - shouldn't happen */
/* FALLTHROUGH */
default:
*x = *y = 0;
ms->button = ms->obutton;
VLOG(1, (LOG_DEBUG, "psmintr: unknown PS2++ packet "
"type %d: 0x%02x 0x%02x 0x%02x\n",
MOUSE_PS2PLUS_PACKET_TYPE(pb->ipacket),
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2]));
break;
}
} else {
/* preserve button states */
ms->button |= ms->obutton & MOUSE_EXTBUTTONS;
}
}
static int
proc_synaptics(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int touchpad_buttons;
static int guest_buttons;
static int ew_finger_count;
static finger_t f[PSM_FINGERS];
int w, id, nfingers, palm, ewcode, extended_buttons, clickpad_pressed;
extended_buttons = 0;
/* TouchPad PS/2 absolute mode message format with capFourButtons:
*
* Bits: 7 6 5 4 3 2 1 0 (LSB)
* ------------------------------------------------
* ipacket[0]: 1 0 W3 W2 0 W1 R L
* ipacket[1]: Yb Ya Y9 Y8 Xb Xa X9 X8
* ipacket[2]: Z7 Z6 Z5 Z4 Z3 Z2 Z1 Z0
* ipacket[3]: 1 1 Yc Xc 0 W0 D^R U^L
* ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
*
* Legend:
* L: left physical mouse button
* R: right physical mouse button
* D: down button
* U: up button
* W: "wrist" value
* X: x position
* Y: y position
* Z: pressure
*
* Without capFourButtons but with nExtendeButtons and/or capMiddle
*
* Bits: 7 6 5 4 3 2 1 0 (LSB)
* ------------------------------------------------------
* ipacket[3]: 1 1 Yc Xc 0 W0 E^R M^L
* ipacket[4]: X7 X6 X5 X4 X3|b7 X2|b5 X1|b3 X0|b1
* ipacket[5]: Y7 Y6 Y5 Y4 Y3|b8 Y2|b6 Y1|b4 Y0|b2
*
* Legend:
* M: Middle physical mouse button
* E: Extended mouse buttons reported instead of low bits of X and Y
* b1-b8: Extended mouse buttons
* Only ((nExtendedButtons + 1) >> 1) bits are used in packet
* 4 and 5, for reading X and Y value they should be zeroed.
*
* Absolute reportable limits: 0 - 6143.
* Typical bezel limits: 1472 - 5472.
* Typical edge marings: 1632 - 5312.
*
* w = 3 Passthrough Packet
*
* Byte 2,5,6 == Byte 1,2,3 of "Guest"
*/
if (!synaptics_support)
return (0);
/* Sanity check for out of sync packets. */
if ((pb->ipacket[0] & 0xc8) != 0x80 ||
(pb->ipacket[3] & 0xc8) != 0xc0)
return (-1);
*x = *y = 0;
ms->button = ms->obutton;
/*
* Pressure value.
* Interpretation:
* z = 0 No finger contact
* z = 10 Finger hovering near the pad
* z = 30 Very light finger contact
* z = 80 Normal finger contact
* z = 110 Very heavy finger contact
* z = 200 Finger lying flat on pad surface
* z = 255 Maximum reportable Z
*/
*z = pb->ipacket[2];
/*
* Finger width value
* Interpretation:
* w = 0 Two finger on the pad (capMultiFinger needed)
* w = 1 Three or more fingers (capMultiFinger needed)
* w = 2 Pen (instead of finger) (capPen needed)
* w = 3 Reserved (passthrough?)
* w = 4-7 Finger of normal width (capPalmDetect needed)
* w = 8-14 Very wide finger or palm (capPalmDetect needed)
* w = 15 Maximum reportable width (capPalmDetect needed)
*/
/* XXX Is checking capExtended enough? */
if (sc->synhw.capExtended)
w = ((pb->ipacket[0] & 0x30) >> 2) |
((pb->ipacket[0] & 0x04) >> 1) |
((pb->ipacket[3] & 0x04) >> 2);
else {
/* Assume a finger of regular width. */
w = 4;
}
switch (w) {
case 3:
/*
* Handle packets from the guest device. See:
* Synaptics PS/2 TouchPad Interfacing Guide, Section 5.1
*/
if (sc->synhw.capPassthrough || sc->muxport != PSM_NOMUX) {
*x = ((pb->ipacket[1] & 0x10) ?
pb->ipacket[4] - 256 : pb->ipacket[4]);
*y = ((pb->ipacket[1] & 0x20) ?
pb->ipacket[5] - 256 : pb->ipacket[5]);
*z = 0;
guest_buttons = 0;
if (pb->ipacket[1] & 0x01)
guest_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[1] & 0x04)
guest_buttons |= MOUSE_BUTTON2DOWN;
if (pb->ipacket[1] & 0x02)
guest_buttons |= MOUSE_BUTTON3DOWN;
#ifdef EVDEV_SUPPORT
if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) {
evdev_push_rel(sc->evdev_r, REL_X, *x);
evdev_push_rel(sc->evdev_r, REL_Y, -*y);
evdev_push_mouse_btn(sc->evdev_r,
guest_buttons);
evdev_sync(sc->evdev_r);
}
#endif
ms->button = touchpad_buttons | guest_buttons |
sc->extended_buttons;
}
goto SYNAPTICS_END;
case 2:
/* Handle Extended W mode packets */
ewcode = (pb->ipacket[5] & 0xf0) >> 4;
#if PSM_FINGERS > 1
switch (ewcode) {
case 1:
/* Secondary finger */
if (sc->synhw.capAdvancedGestures)
f[1] = (finger_t) {
.x = (((pb->ipacket[4] & 0x0f) << 8) |
pb->ipacket[1]) << 1,
.y = (((pb->ipacket[4] & 0xf0) << 4) |
pb->ipacket[2]) << 1,
.p = ((pb->ipacket[3] & 0x30) |
(pb->ipacket[5] & 0x0f)) << 1,
.w = PSM_FINGER_DEFAULT_W,
.flags = PSM_FINGER_FUZZY,
};
else if (sc->synhw.capReportsV)
f[1] = (finger_t) {
.x = (((pb->ipacket[4] & 0x0f) << 8) |
(pb->ipacket[1] & 0xfe)) << 1,
.y = (((pb->ipacket[4] & 0xf0) << 4) |
(pb->ipacket[2] & 0xfe)) << 1,
.p = ((pb->ipacket[3] & 0x30) |
(pb->ipacket[5] & 0x0e)) << 1,
.w = (((pb->ipacket[5] & 0x01) << 2) |
((pb->ipacket[2] & 0x01) << 1) |
(pb->ipacket[1] & 0x01)) + 8,
.flags = PSM_FINGER_FUZZY,
};
break;
case 2:
ew_finger_count = pb->ipacket[1] & 0x0f;
default:
break;
}
#endif
goto SYNAPTICS_END;
case 1:
if (sc->synhw.capReportsV && ew_finger_count > 3) {
nfingers = ew_finger_count;
break;
}
/* FALLTHROUGH */
case 0:
nfingers = w + 2;
break;
default:
nfingers = 1;
}
if (sc->syninfo.touchpad_off)
goto SYNAPTICS_END;
/* Button presses */
touchpad_buttons = 0;
if (pb->ipacket[0] & 0x01)
touchpad_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[0] & 0x02)
touchpad_buttons |= MOUSE_BUTTON3DOWN;
if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x01)
touchpad_buttons |= MOUSE_BUTTON4DOWN;
if ((pb->ipacket[3] ^ pb->ipacket[0]) & 0x02)
touchpad_buttons |= MOUSE_BUTTON5DOWN;
} else if (sc->synhw.capExtended && sc->synhw.capMiddle &&
!sc->synhw.capClickPad) {
/* Middle Button */
if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x01)
touchpad_buttons |= MOUSE_BUTTON2DOWN;
} else if (sc->synhw.capExtended && (sc->synhw.nExtendedButtons > 0)) {
/* Extended Buttons */
if ((pb->ipacket[0] ^ pb->ipacket[3]) & 0x02) {
if (sc->syninfo.directional_scrolls) {
if (pb->ipacket[4] & 0x01)
extended_buttons |= MOUSE_BUTTON4DOWN;
if (pb->ipacket[5] & 0x01)
extended_buttons |= MOUSE_BUTTON5DOWN;
if (pb->ipacket[4] & 0x02)
extended_buttons |= MOUSE_BUTTON6DOWN;
if (pb->ipacket[5] & 0x02)
extended_buttons |= MOUSE_BUTTON7DOWN;
} else {
if (pb->ipacket[4] & 0x01)
extended_buttons |= MOUSE_BUTTON1DOWN;
if (pb->ipacket[5] & 0x01)
extended_buttons |= MOUSE_BUTTON3DOWN;
if (pb->ipacket[4] & 0x02)
extended_buttons |= MOUSE_BUTTON2DOWN;
sc->extended_buttons = extended_buttons;
}
/*
* Zero out bits used by extended buttons to avoid
* misinterpretation of the data absolute position.
*
* The bits represented by
*
* (nExtendedButtons + 1) >> 1
*
* will be masked out in both bytes.
* The mask for n bits is computed with the formula
*
* (1 << n) - 1
*/
int maskedbits = 0;
int mask = 0;
maskedbits = (sc->synhw.nExtendedButtons + 1) >> 1;
mask = (1 << maskedbits) - 1;
#ifdef EVDEV_SUPPORT
int i;
if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) {
if (sc->synhw.capPassthrough) {
evdev_push_mouse_btn(sc->evdev_r,
extended_buttons);
evdev_sync(sc->evdev_r);
}
for (i = 0; i < maskedbits; i++) {
evdev_push_key(sc->evdev_a,
BTN_0 + i * 2,
pb->ipacket[4] & (1 << i));
evdev_push_key(sc->evdev_a,
BTN_0 + i * 2 + 1,
pb->ipacket[5] & (1 << i));
}
}
#endif
pb->ipacket[4] &= ~(mask);
pb->ipacket[5] &= ~(mask);
} else if (!sc->syninfo.directional_scrolls &&
!sc->gesture.in_vscroll) {
/*
* Keep reporting MOUSE DOWN until we get a new packet
* indicating otherwise.
*/
extended_buttons |= sc->extended_buttons;
}
}
if (sc->synhw.capReportsV && nfingers > 1)
f[0] = (finger_t) {
.x = ((pb->ipacket[3] & 0x10) << 8) |
((pb->ipacket[1] & 0x0f) << 8) |
(pb->ipacket[4] & 0xfd),
.y = ((pb->ipacket[3] & 0x20) << 7) |
((pb->ipacket[1] & 0xf0) << 4) |
(pb->ipacket[5] & 0xfd),
.p = *z & 0xfe,
.w = (((pb->ipacket[2] & 0x01) << 2) |
(pb->ipacket[5] & 0x02) |
((pb->ipacket[4] & 0x02) >> 1)) + 8,
.flags = PSM_FINGER_FUZZY,
};
else
f[0] = (finger_t) {
.x = ((pb->ipacket[3] & 0x10) << 8) |
((pb->ipacket[1] & 0x0f) << 8) |
pb->ipacket[4],
.y = ((pb->ipacket[3] & 0x20) << 7) |
((pb->ipacket[1] & 0xf0) << 4) |
pb->ipacket[5],
.p = *z,
.w = w,
.flags = nfingers > 1 ? PSM_FINGER_FUZZY : 0,
};
/* Ignore hovering and unmeasurable touches */
if (f[0].p < sc->syninfo.min_pressure || f[0].x < 2)
nfingers = 0;
/* Handle ClickPad */
if (sc->synhw.capClickPad) {
clickpad_pressed = (pb->ipacket[0] ^ pb->ipacket[3]) & 0x01;
if (sc->synhw.forcePad) {
/*
* Forcepads erroneously report button click if there
* are 2 or more fingers on the touchpad breaking
* multifinger gestures. To workaround this start
* reporting a click only after 4 consecutive single
* touch packets has been received.
* Skip these packets in case more contacts appear.
*/
switch (nfingers) {
case 0:
sc->fpcount = 0;
break;
case 1:
if (clickpad_pressed && sc->fpcount < INT_MAX)
++sc->fpcount;
/* FALLTHROUGH */
default:
if (!clickpad_pressed)
sc->fpcount = 0;
if (sc->fpcount >= sc->syninfo.window_min)
touchpad_buttons |= MOUSE_BUTTON1DOWN;
}
} else if (clickpad_pressed)
touchpad_buttons |= MOUSE_BUTTON1DOWN;
}
for (id = 0; id < PSM_FINGERS; id++)
if (id >= nfingers)
PSM_FINGER_RESET(f[id]);
#ifdef EVDEV_SUPPORT
if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) {
for (id = 0; id < PSM_FINGERS; id++) {
if (PSM_FINGER_IS_SET(f[id]))
psm_push_mt_finger(sc, id, &f[id]);
else
psm_release_mt_slot(sc->evdev_a, id);
}
evdev_push_key(sc->evdev_a, BTN_TOUCH, nfingers > 0);
evdev_push_nfingers(sc->evdev_a, nfingers);
if (nfingers > 0)
psm_push_st_finger(sc, &f[0]);
else
evdev_push_abs(sc->evdev_a, ABS_PRESSURE, 0);
evdev_push_mouse_btn(sc->evdev_a, touchpad_buttons);
if (sc->synhw.capExtended && sc->synhw.capFourButtons) {
evdev_push_key(sc->evdev_a, BTN_FORWARD,
touchpad_buttons & MOUSE_BUTTON4DOWN);
evdev_push_key(sc->evdev_a, BTN_BACK,
touchpad_buttons & MOUSE_BUTTON5DOWN);
}
evdev_sync(sc->evdev_a);
}
#endif
ms->button = touchpad_buttons;
palm = psmpalmdetect(sc, &f[0], nfingers);
/* Palm detection doesn't terminate the current action. */
if (!palm)
psmgestures(sc, &f[0], nfingers, ms);
for (id = 0; id < PSM_FINGERS; id++)
psmsmoother(sc, &f[id], id, ms, x, y);
if (palm) {
*x = *y = *z = 0;
ms->button = ms->obutton;
return (0);
}
ms->button |= extended_buttons | guest_buttons;
SYNAPTICS_END:
/*
* Use the extra buttons as a scrollwheel
*
* XXX X.Org uses the Z axis for vertical wheel only,
* whereas moused(8) understands special values to differ
* vertical and horizontal wheels.
*
* xf86-input-mouse needs therefore a small patch to
* understand these special values. Without it, the
* horizontal wheel acts as a vertical wheel in X.Org.
*
* That's why the horizontal wheel is disabled by
* default for now.
*/
if (ms->button & MOUSE_BUTTON4DOWN)
*z = -1;
else if (ms->button & MOUSE_BUTTON5DOWN)
*z = 1;
else if (ms->button & MOUSE_BUTTON6DOWN)
*z = -2;
else if (ms->button & MOUSE_BUTTON7DOWN)
*z = 2;
else
*z = 0;
ms->button &= ~(MOUSE_BUTTON4DOWN | MOUSE_BUTTON5DOWN |
MOUSE_BUTTON6DOWN | MOUSE_BUTTON7DOWN);
return (0);
}
static int
proc_synaptics_mux(struct psm_softc *sc, packetbuf_t *pb)
{
int butt;
/*
* Convert 3-byte interleaved mixture of Synaptics and generic mouse
* packets into plain 6-byte Synaptics packet protocol.
* While in hidden multiplexing mode KBC does some editing of the
* packet stream. It remembers the button bits from the last packet
* received from each device, and replaces the button bits of every
* packet with the logical OR of all devices’ most recent button bits.
* This button crosstalk should be filtered out as Synaptics and
* generic mouse encode middle button presses in a different way.
*/
switch (pb->ipacket[0] & 0xc0) {
case 0x80: /* First 3 bytes of Synaptics packet */
bcopy(pb->ipacket, sc->muxsave, 3);
/* Compute middle mouse button supression timeout. */
sc->muxmidtimeout.tv_sec = 0;
sc->muxmidtimeout.tv_usec = 50000; /* ~2-3 ints */
timevaladd(&sc->muxmidtimeout, &sc->lastsoftintr);
return (1);
case 0xc0: /* Second 3 bytes of Synaptics packet */
/* Join two 3-bytes absolute packets */
bcopy(pb->ipacket, pb->ipacket + 3, 3);
bcopy(sc->muxsave, pb->ipacket, 3);
/* Prefer trackpoint buttons over touchpad's */
pb->ipacket[0] &= ~(0x08 | sc->muxmsbuttons);
pb->ipacket[3] &= ~(0x08 | sc->muxmsbuttons);
butt = (pb->ipacket[3] & 0x03) << 2 | (pb->ipacket[0] & 0x03);
/* Add hysteresis to remove spurious middle button events */
if (butt != sc->muxtpbuttons && sc->fpcount < 1) {
pb->ipacket[0] &= 0xfc;
pb->ipacket[0] |= sc->muxtpbuttons & 0x03;
pb->ipacket[3] &= 0xfc;
pb->ipacket[3] |= sc->muxtpbuttons >> 2 & 0x03;
++sc->fpcount;
} else {
sc->fpcount = 0;
sc->muxtpbuttons = butt;
}
/* Filter out impossible w induced by middle trackpoint btn */
if (sc->synhw.capExtended && !sc->synhw.capPassthrough &&
(pb->ipacket[0] & 0x34) == 0x04 &&
(pb->ipacket[3] & 0x04) == 0x04) {
pb->ipacket[0] &= 0xfb;
pb->ipacket[3] &= 0xfb;
}
sc->muxsave[0] &= 0x30;
break;
default: /* Generic mouse (Trackpoint) packet */
/* Filter out middle button events induced by some w values */
if (sc->muxmsbuttons & 0x03 || pb->ipacket[0] & 0x03 ||
(timevalcmp(&sc->lastsoftintr, &sc->muxmidtimeout, <=) &&
(sc->muxsave[0] & 0x30 || sc->muxsave[2] > 8)))
pb->ipacket[0] &= 0xfb;
sc->muxmsbuttons = pb->ipacket[0] & 0x07;
/* Convert to Synaptics pass-through protocol */
pb->ipacket[4] = pb->ipacket[1];
pb->ipacket[5] = pb->ipacket[2];
pb->ipacket[1] = pb->ipacket[0];
pb->ipacket[2] = 0;
pb->ipacket[0] = 0x84 | (sc->muxtpbuttons & 0x03);
pb->ipacket[3] = 0xc4 | (sc->muxtpbuttons >> 2 & 0x03);
}
VLOG(4, (LOG_DEBUG, "synaptics: %02x %02x %02x %02x %02x %02x\n",
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
pb->inputbytes = MOUSE_SYNAPTICS_PACKETSIZE;
return (0);
}
static int
psmpalmdetect(struct psm_softc *sc, finger_t *f, int nfingers)
{
if (!(
((sc->synhw.capMultiFinger || sc->synhw.capAdvancedGestures) &&
!sc->synhw.capReportsV && nfingers > 1) ||
(sc->synhw.capReportsV && nfingers > 2) ||
(sc->synhw.capPalmDetect && f->w <= sc->syninfo.max_width) ||
(!sc->synhw.capPalmDetect && f->p <= sc->syninfo.max_pressure) ||
(sc->synhw.capPen && f->flags & PSM_FINGER_IS_PEN))) {
/*
* We consider the packet irrelevant for the current
* action when:
* - the width isn't comprised in:
* [1; max_width]
* - the pressure isn't comprised in:
* [min_pressure; max_pressure]
* - pen aren't supported but PSM_FINGER_IS_PEN is set
*/
VLOG(2, (LOG_DEBUG, "synaptics: palm detected! (%d)\n", f->w));
return (1);
}
return (0);
}
static void
psmgestures(struct psm_softc *sc, finger_t *fingers, int nfingers,
mousestatus_t *ms)
{
smoother_t *smoother;
gesture_t *gest;
finger_t *f;
int y_ok, center_button, center_x, right_button, right_x, i;
f = &fingers[0];
smoother = &sc->smoother[0];
gest = &sc->gesture;
/* Find first active finger. */
if (nfingers > 0) {
for (i = 0; i < PSM_FINGERS; i++) {
if (PSM_FINGER_IS_SET(fingers[i])) {
f = &fingers[i];
smoother = &sc->smoother[i];
break;
}
}
}
/*
* Check pressure to detect a real wanted action on the
* touchpad.
*/
if (f->p >= sc->syninfo.min_pressure) {
int x0, y0;
int dxp, dyp;
int start_x, start_y;
int queue_len;
int margin_top, margin_right, margin_bottom, margin_left;
int window_min, window_max;
int vscroll_hor_area, vscroll_ver_area;
int two_finger_scroll;
int max_x, max_y;
int three_finger_drag;
/* Read sysctl. */
/* XXX Verify values? */
margin_top = sc->syninfo.margin_top;
margin_right = sc->syninfo.margin_right;
margin_bottom = sc->syninfo.margin_bottom;
margin_left = sc->syninfo.margin_left;
window_min = sc->syninfo.window_min;
window_max = sc->syninfo.window_max;
vscroll_hor_area = sc->syninfo.vscroll_hor_area;
vscroll_ver_area = sc->syninfo.vscroll_ver_area;
two_finger_scroll = sc->syninfo.two_finger_scroll;
max_x = sc->syninfo.max_x;
max_y = sc->syninfo.max_y;
three_finger_drag = sc->syninfo.three_finger_drag;
/* Read current absolute position. */
x0 = f->x;
y0 = f->y;
/*
* Limit the coordinates to the specified margins because
* this area isn't very reliable.
*/
if (x0 <= margin_left)
x0 = margin_left;
else if (x0 >= max_x - margin_right)
x0 = max_x - margin_right;
if (y0 <= margin_bottom)
y0 = margin_bottom;
else if (y0 >= max_y - margin_top)
y0 = max_y - margin_top;
VLOG(3, (LOG_DEBUG, "synaptics: ipacket: [%d, %d], %d, %d\n",
x0, y0, f->p, f->w));
/*
* If the action is just beginning, init the structure and
* compute tap timeout.
*/
if (!(sc->flags & PSM_FLAGS_FINGERDOWN)) {
VLOG(3, (LOG_DEBUG, "synaptics: ----\n"));
/* Initialize queue. */
gest->window_min = window_min;
/* Reset pressure peak. */
gest->zmax = 0;
/* Reset fingers count. */
gest->fingers_nb = 0;
/* Reset virtual scrolling state. */
gest->in_vscroll = 0;
/* Compute tap timeout. */
if (tap_enabled != 0) {
gest->taptimeout = (struct timeval) {
.tv_sec = tap_timeout / 1000000,
.tv_usec = tap_timeout % 1000000,
};
timevaladd(
&gest->taptimeout, &sc->lastsoftintr);
} else
timevalclear(&gest->taptimeout);
sc->flags |= PSM_FLAGS_FINGERDOWN;
/* Smoother has not been reset yet */
queue_len = 1;
start_x = x0;
start_y = y0;
} else {
queue_len = smoother->queue_len + 1;
start_x = smoother->start_x;
start_y = smoother->start_y;
}
/* Process ClickPad softbuttons */
if (sc->synhw.capClickPad && ms->button & MOUSE_BUTTON1DOWN) {
y_ok = sc->syninfo.softbuttons_y >= 0 ?
start_y < sc->syninfo.softbuttons_y :
start_y > max_y + sc->syninfo.softbuttons_y;
center_button = MOUSE_BUTTON2DOWN;
center_x = sc->syninfo.softbutton2_x;
right_button = MOUSE_BUTTON3DOWN;
right_x = sc->syninfo.softbutton3_x;
if (center_x > 0 && right_x > 0 && center_x > right_x) {
center_button = MOUSE_BUTTON3DOWN;
center_x = sc->syninfo.softbutton3_x;
right_button = MOUSE_BUTTON2DOWN;
right_x = sc->syninfo.softbutton2_x;
}
if (right_x > 0 && start_x > right_x && y_ok)
ms->button = (ms->button &
~MOUSE_BUTTON1DOWN) | right_button;
else if (center_x > 0 && start_x > center_x && y_ok)
ms->button = (ms->button &
~MOUSE_BUTTON1DOWN) | center_button;
}
/* If in tap-hold or three fingers, add the recorded button. */
if (gest->in_taphold || (nfingers == 3 && three_finger_drag))
ms->button |= gest->tap_button;
/*
* For tap, we keep the maximum number of fingers and the
* pressure peak. Also with multiple fingers, we increase
* the minimum window.
*/
if (nfingers > 1)
gest->window_min = window_max;
gest->fingers_nb = imax(nfingers, gest->fingers_nb);
gest->zmax = imax(f->p, gest->zmax);
/* Do we have enough packets to consider this a gesture? */
if (queue_len < gest->window_min)
return;
dyp = -1;
dxp = -1;
/* Is a scrolling action occurring? */
if (!gest->in_taphold && !ms->button &&
(!gest->in_vscroll || two_finger_scroll)) {
/*
* A scrolling action must not conflict with a tap
* action. Here are the conditions to consider a
* scrolling action:
* - the action in a configurable area
* - one of the following:
* . the distance between the last packet and the
* first should be above a configurable minimum
* . tap timed out
*/
dxp = abs(x0 - start_x);
dyp = abs(y0 - start_y);
if (timevalcmp(&sc->lastsoftintr, &gest->taptimeout, >) ||
dxp >= sc->syninfo.vscroll_min_delta ||
dyp >= sc->syninfo.vscroll_min_delta) {
/*
* Handle two finger scrolling.
* Note that we don't rely on fingers_nb
* as that keeps the maximum number of fingers.
*/
if (two_finger_scroll) {
if (nfingers == 2) {
gest->in_vscroll +=
dyp ? 2 : 0;
gest->in_vscroll +=
dxp ? 1 : 0;
}
} else {
/* Check for horizontal scrolling. */
if ((vscroll_hor_area > 0 &&
start_y <= vscroll_hor_area) ||
(vscroll_hor_area < 0 &&
start_y >=
max_y + vscroll_hor_area))
gest->in_vscroll += 2;
/* Check for vertical scrolling. */
if ((vscroll_ver_area > 0 &&
start_x <= vscroll_ver_area) ||
(vscroll_ver_area < 0 &&
start_x >=
max_x + vscroll_ver_area))
gest->in_vscroll += 1;
}
/* Avoid conflicts if area overlaps. */
if (gest->in_vscroll >= 3)
gest->in_vscroll =
(dxp > dyp) ? 2 : 1;
}
}
/*
* Reset two finger scrolling when the number of fingers
* is different from two or any button is pressed.
*/
if (two_finger_scroll && gest->in_vscroll != 0 &&
(nfingers != 2 || ms->button))
gest->in_vscroll = 0;
VLOG(5, (LOG_DEBUG,
"synaptics: virtual scrolling: %s "
"(direction=%d, dxp=%d, dyp=%d, fingers=%d)\n",
gest->in_vscroll ? "YES" : "NO",
gest->in_vscroll, dxp, dyp,
gest->fingers_nb));
} else if (sc->flags & PSM_FLAGS_FINGERDOWN) {
/*
* An action is currently taking place but the pressure
* dropped under the minimum, putting an end to it.
*/
int taphold_timeout, dx, dy, tap_max_delta;
dx = abs(smoother->queue[smoother->queue_cursor].x -
smoother->start_x);
dy = abs(smoother->queue[smoother->queue_cursor].y -
smoother->start_y);
/* Max delta is disabled for multi-fingers tap. */
if (gest->fingers_nb > 1)
tap_max_delta = imax(dx, dy);
else
tap_max_delta = sc->syninfo.tap_max_delta;
sc->flags &= ~PSM_FLAGS_FINGERDOWN;
/* Check for tap. */
VLOG(3, (LOG_DEBUG,
"synaptics: zmax=%d, dx=%d, dy=%d, "
"delta=%d, fingers=%d, queue=%d\n",
gest->zmax, dx, dy, tap_max_delta, gest->fingers_nb,
smoother->queue_len));
if (!gest->in_vscroll && gest->zmax >= tap_threshold &&
timevalcmp(&sc->lastsoftintr, &gest->taptimeout, <=) &&
dx <= tap_max_delta && dy <= tap_max_delta &&
smoother->queue_len >= sc->syninfo.tap_min_queue) {
/*
* We have a tap if:
* - the maximum pressure went over tap_threshold
* - the action ended before tap_timeout
*
* To handle tap-hold, we must delay any button push to
* the next action.
*/
if (gest->in_taphold) {
/*
* This is the second and last tap of a
* double tap action, not a tap-hold.
*/
gest->in_taphold = 0;
/*
* For double-tap to work:
* - no button press is emitted (to
* simulate a button release)
* - PSM_FLAGS_FINGERDOWN is set to
* force the next packet to emit a
* button press)
*/
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
gest->tap_button));
sc->flags |= PSM_FLAGS_FINGERDOWN;
/* Schedule button press on next interrupt */
sc->idletimeout.tv_sec = psmhz > 1 ?
0 : 1;
sc->idletimeout.tv_usec = psmhz > 1 ?
1000000 / psmhz : 0;
} else {
/*
* This is the first tap: we set the
* tap-hold state and notify the button
* down event.
*/
gest->in_taphold = 1;
taphold_timeout = sc->syninfo.taphold_timeout;
gest->taptimeout.tv_sec = taphold_timeout /
1000000;
gest->taptimeout.tv_usec = taphold_timeout %
1000000;
sc->idletimeout = gest->taptimeout;
timevaladd(&gest->taptimeout,
&sc->lastsoftintr);
switch (gest->fingers_nb) {
case 3:
gest->tap_button =
MOUSE_BUTTON2DOWN;
break;
case 2:
gest->tap_button =
MOUSE_BUTTON3DOWN;
break;
default:
gest->tap_button =
MOUSE_BUTTON1DOWN;
}
VLOG(2, (LOG_DEBUG,
"synaptics: button PRESS: %d\n",
gest->tap_button));
ms->button |= gest->tap_button;
}
} else {
/*
* Not enough pressure or timeout: reset
* tap-hold state.
*/
if (gest->in_taphold) {
VLOG(2, (LOG_DEBUG,
"synaptics: button RELEASE: %d\n",
gest->tap_button));
gest->in_taphold = 0;
} else {
VLOG(2, (LOG_DEBUG,
"synaptics: not a tap-hold\n"));
}
}
} else if (!(sc->flags & PSM_FLAGS_FINGERDOWN) && gest->in_taphold) {
/*
* For a tap-hold to work, the button must remain down at
* least until timeout (where the in_taphold flags will be
* cleared) or during the next action.
*/
if (timevalcmp(&sc->lastsoftintr, &gest->taptimeout, <=)) {
ms->button |= gest->tap_button;
} else {
VLOG(2, (LOG_DEBUG, "synaptics: button RELEASE: %d\n",
gest->tap_button));
gest->in_taphold = 0;
}
}
return;
}
static void
psmsmoother(struct psm_softc *sc, finger_t *f, int smoother_id,
mousestatus_t *ms, int *x, int *y)
{
smoother_t *smoother = &sc->smoother[smoother_id];
gesture_t *gest = &(sc->gesture);
/*
* Check pressure to detect a real wanted action on the
* touchpad.
*/
if (f->p >= sc->syninfo.min_pressure) {
int x0, y0;
int cursor, peer, window;
int dx, dy, dxp, dyp;
int max_width, max_pressure;
int margin_top, margin_right, margin_bottom, margin_left;
int na_top, na_right, na_bottom, na_left;
int window_min, window_max;
int multiplicator;
int weight_current, weight_previous, weight_len_squared;
int div_min, div_max, div_len;
int vscroll_hor_area, vscroll_ver_area;
int two_finger_scroll;
int max_x, max_y;
int len, weight_prev_x, weight_prev_y;
int div_max_x, div_max_y, div_x, div_y;
int is_fuzzy;
int natural_scroll;
/* Read sysctl. */
/* XXX Verify values? */
max_width = sc->syninfo.max_width;
max_pressure = sc->syninfo.max_pressure;
margin_top = sc->syninfo.margin_top;
margin_right = sc->syninfo.margin_right;
margin_bottom = sc->syninfo.margin_bottom;
margin_left = sc->syninfo.margin_left;
na_top = sc->syninfo.na_top;
na_right = sc->syninfo.na_right;
na_bottom = sc->syninfo.na_bottom;
na_left = sc->syninfo.na_left;
window_min = sc->syninfo.window_min;
window_max = sc->syninfo.window_max;
multiplicator = sc->syninfo.multiplicator;
weight_current = sc->syninfo.weight_current;
weight_previous = sc->syninfo.weight_previous;
weight_len_squared = sc->syninfo.weight_len_squared;
div_min = sc->syninfo.div_min;
div_max = sc->syninfo.div_max;
div_len = sc->syninfo.div_len;
vscroll_hor_area = sc->syninfo.vscroll_hor_area;
vscroll_ver_area = sc->syninfo.vscroll_ver_area;
two_finger_scroll = sc->syninfo.two_finger_scroll;
max_x = sc->syninfo.max_x;
max_y = sc->syninfo.max_y;
natural_scroll = sc->syninfo.natural_scroll;
is_fuzzy = (f->flags & PSM_FINGER_FUZZY) != 0;
/* Read current absolute position. */
x0 = f->x;
y0 = f->y;
/*
* Limit the coordinates to the specified margins because
* this area isn't very reliable.
*/
if (x0 <= margin_left)
x0 = margin_left;
else if (x0 >= max_x - margin_right)
x0 = max_x - margin_right;
if (y0 <= margin_bottom)
y0 = margin_bottom;
else if (y0 >= max_y - margin_top)
y0 = max_y - margin_top;
/* If the action is just beginning, init the structure. */
if (smoother->active == 0) {
VLOG(3, (LOG_DEBUG, "smoother%d: ---\n", smoother_id));
/* Store the first point of this action. */
smoother->start_x = x0;
smoother->start_y = y0;
dx = dy = 0;
/* Initialize queue. */
smoother->queue_cursor = SYNAPTICS_PACKETQUEUE;
smoother->queue_len = 0;
/* Reset average. */
smoother->avg_dx = 0;
smoother->avg_dy = 0;
/* Reset squelch. */
smoother->squelch_x = 0;
smoother->squelch_y = 0;
/* Activate queue */
smoother->active = 1;
} else {
/* Calculate the current delta. */
cursor = smoother->queue_cursor;
dx = x0 - smoother->queue[cursor].x;
dy = y0 - smoother->queue[cursor].y;
}
VLOG(3, (LOG_DEBUG, "smoother%d: ipacket: [%d, %d], %d, %d\n",
smoother_id, x0, y0, f->p, f->w));
/* Queue this new packet. */
cursor = SYNAPTICS_QUEUE_CURSOR(smoother->queue_cursor - 1);
smoother->queue[cursor].x = x0;
smoother->queue[cursor].y = y0;
smoother->queue_cursor = cursor;
if (smoother->queue_len < SYNAPTICS_PACKETQUEUE)
smoother->queue_len++;
VLOG(5, (LOG_DEBUG,
"smoother%d: cursor[%d]: x=%d, y=%d, dx=%d, dy=%d\n",
smoother_id, cursor, x0, y0, dx, dy));
/* Do we have enough packets to consider this a movement? */
if (smoother->queue_len < gest->window_min)
return;
weight_prev_x = weight_prev_y = weight_previous;
div_max_x = div_max_y = div_max;
if (gest->in_vscroll) {
/* Dividers are different with virtual scrolling. */
div_min = sc->syninfo.vscroll_div_min;
div_max_x = div_max_y = sc->syninfo.vscroll_div_max;
} else {
/*
* There's a lot of noise in coordinates when
* the finger is on the touchpad's borders. When
* using this area, we apply a special weight and
* div.
*/
if (x0 <= na_left || x0 >= max_x - na_right) {
weight_prev_x = sc->syninfo.weight_previous_na;
div_max_x = sc->syninfo.div_max_na;
}
if (y0 <= na_bottom || y0 >= max_y - na_top) {
weight_prev_y = sc->syninfo.weight_previous_na;
div_max_y = sc->syninfo.div_max_na;
}
}
/*
* Calculate weights for the average operands and
* the divisor. Both depend on the distance between
* the current packet and a previous one (based on the
* window width).
*/
window = imin(smoother->queue_len, window_max);
peer = SYNAPTICS_QUEUE_CURSOR(cursor + window - 1);
dxp = abs(x0 - smoother->queue[peer].x) + 1;
dyp = abs(y0 - smoother->queue[peer].y) + 1;
len = (dxp * dxp) + (dyp * dyp);
weight_prev_x = imin(weight_prev_x,
weight_len_squared * weight_prev_x / len);
weight_prev_y = imin(weight_prev_y,
weight_len_squared * weight_prev_y / len);
len = (dxp + dyp) / 2;
div_x = div_len * div_max_x / len;
div_x = imin(div_max_x, div_x);
div_x = imax(div_min, div_x);
div_y = div_len * div_max_y / len;
div_y = imin(div_max_y, div_y);
div_y = imax(div_min, div_y);
VLOG(3, (LOG_DEBUG,
"smoother%d: peer=%d, len=%d, weight=%d/%d, div=%d/%d\n",
smoother_id, peer, len, weight_prev_x, weight_prev_y,
div_x, div_y));
/* Compute averages. */
smoother->avg_dx =
(weight_current * dx * multiplicator +
weight_prev_x * smoother->avg_dx) /
(weight_current + weight_prev_x);
smoother->avg_dy =
(weight_current * dy * multiplicator +
weight_prev_y * smoother->avg_dy) /
(weight_current + weight_prev_y);
VLOG(5, (LOG_DEBUG,
"smoother%d: avg_dx~=%d, avg_dy~=%d\n", smoother_id,
smoother->avg_dx / multiplicator,
smoother->avg_dy / multiplicator));
/* Use these averages to calculate x & y. */
smoother->squelch_x += smoother->avg_dx;
dxp = smoother->squelch_x / (div_x * multiplicator);
smoother->squelch_x = smoother->squelch_x %
(div_x * multiplicator);
smoother->squelch_y += smoother->avg_dy;
dyp = smoother->squelch_y / (div_y * multiplicator);
smoother->squelch_y = smoother->squelch_y %
(div_y * multiplicator);
switch(gest->in_vscroll) {
case 0: /* Pointer movement. */
/* On real<->fuzzy finger switch the x/y pos jumps */
if (is_fuzzy == smoother->is_fuzzy) {
*x += dxp;
*y += dyp;
}
VLOG(3, (LOG_DEBUG, "smoother%d: [%d, %d] -> [%d, %d]\n",
smoother_id, dx, dy, dxp, dyp));
break;
case 1: /* Vertical scrolling. */
if (dyp != 0) {
if (two_finger_scroll && natural_scroll)
ms->button |= (dyp > 0) ?
MOUSE_BUTTON5DOWN : MOUSE_BUTTON4DOWN;
else
ms->button |= (dyp > 0) ?
MOUSE_BUTTON4DOWN : MOUSE_BUTTON5DOWN;
}
break;
case 2: /* Horizontal scrolling. */
if (dxp != 0) {
if (two_finger_scroll && natural_scroll)
ms->button |= (dxp > 0) ?
MOUSE_BUTTON6DOWN : MOUSE_BUTTON7DOWN;
else
ms->button |= (dxp > 0) ?
MOUSE_BUTTON7DOWN : MOUSE_BUTTON6DOWN;
}
break;
}
smoother->is_fuzzy = is_fuzzy;
} else {
/*
* Deactivate queue. Note: We can not just reset queue here
* as these values are still used by gesture processor.
* So postpone reset till next touch.
*/
smoother->active = 0;
}
}
static int
proc_elantech(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int touchpad_button, trackpoint_button;
finger_t fn, f[ELANTECH_MAX_FINGERS];
int pkt, id, scale, i, nfingers, mask, palm;
if (!elantech_support)
return (0);
/* Determine packet format and do a sanity check for out of sync packets. */
if (ELANTECH_PKT_IS_DEBOUNCE(pb, sc->elanhw.hwversion))
pkt = ELANTECH_PKT_NOP;
else if (sc->elanhw.hastrackpoint && ELANTECH_PKT_IS_TRACKPOINT(pb))
pkt = ELANTECH_PKT_TRACKPOINT;
else
switch (sc->elanhw.hwversion) {
case 2:
if (!ELANTECH_PKT_IS_V2(pb))
return (-1);
pkt = (pb->ipacket[0] & 0xc0) == 0x80 ?
ELANTECH_PKT_V2_2FINGER : ELANTECH_PKT_V2_COMMON;
break;
case 3:
if (!ELANTECH_PKT_IS_V3_HEAD(pb, sc->elanhw.hascrc) &&
!ELANTECH_PKT_IS_V3_TAIL(pb, sc->elanhw.hascrc))
return (-1);
pkt = ELANTECH_PKT_V3;
break;
case 4:
if (!ELANTECH_PKT_IS_V4(pb, sc->elanhw.hascrc))
return (-1);
switch (pb->ipacket[3] & 0x03) {
case 0x00:
pkt = ELANTECH_PKT_V4_STATUS;
break;
case 0x01:
pkt = ELANTECH_PKT_V4_HEAD;
break;
case 0x02:
pkt = ELANTECH_PKT_V4_MOTION;
break;
default:
return (-1);
}
break;
default:
return (-1);
}
VLOG(5, (LOG_DEBUG, "elantech: ipacket format: %d\n", pkt));
for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
PSM_FINGER_RESET(f[id]);
*x = *y = *z = 0;
ms->button = ms->obutton;
if (sc->syninfo.touchpad_off)
return (0);
/* Common legend
* L: Left mouse button pressed
* R: Right mouse button pressed
* N: number of fingers on touchpad
* X: absolute x value (horizontal)
* Y: absolute y value (vertical)
* W; width of the finger touch
* P: pressure
*/
switch (pkt) {
case ELANTECH_PKT_V2_COMMON: /* HW V2. One/Three finger touch */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: N1 N0 W3 W2 . . R L
* ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8
* ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[3]: N4 VF W1 W0 . . . B2
* ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* -------------------------------------------
* N4: set if more than 3 fingers (only in 3 fingers mode)
* VF: a kind of flag? (only on EF123, 0 when finger
* is over one of the buttons, 1 otherwise)
* B2: (on EF113 only, 0 otherwise), one button pressed
* P & W is not reported on EF113 touchpads
*/
nfingers = (pb->ipacket[0] & 0xc0) >> 6;
if (nfingers == 3 && (pb->ipacket[3] & 0x80))
nfingers = 4;
if (nfingers == 0) {
mask = (1 << nfingers) - 1; /* = 0x00 */
break;
}
/* Map 3-rd and 4-th fingers to first finger */
mask = (1 << 1) - 1; /* = 0x01 */
f[0] = ELANTECH_FINGER_SET_XYP(pb);
if (sc->elanhw.haspressure) {
f[0].w = ((pb->ipacket[0] & 0x30) >> 2) |
((pb->ipacket[3] & 0x30) >> 4);
} else {
f[0].p = PSM_FINGER_DEFAULT_P;
f[0].w = PSM_FINGER_DEFAULT_W;
}
/*
* HW v2 dont report exact finger positions when 3 or more
* fingers are on touchpad.
*/
if (nfingers > 2)
f[0].flags = PSM_FINGER_FUZZY;
break;
case ELANTECH_PKT_V2_2FINGER: /*HW V2. Two finger touch */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: N1 N0 AY8 AX8 . . R L
* ipacket[1]: AX7 AX6 AX5 AX4 AX3 AX2 AX1 AX0
* ipacket[2]: AY7 AY6 AY5 AY4 AY3 AY2 AY1 AY0
* ipacket[3]: . . BY8 BX8 . . . .
* ipacket[4]: BX7 BX6 BX5 BX4 BX3 BX2 BX1 BX0
* ipacket[5]: BY7 BY6 BY5 BY4 BY3 BY2 BY1 BY0
* -------------------------------------------
* AX: lower-left finger absolute x value
* AY: lower-left finger absolute y value
* BX: upper-right finger absolute x value
* BY: upper-right finger absolute y value
*/
nfingers = 2;
mask = (1 << nfingers) - 1;
for (id = 0; id < imin(2, ELANTECH_MAX_FINGERS); id ++)
f[id] = (finger_t) {
.x = (((pb->ipacket[id * 3] & 0x10) << 4) |
pb->ipacket[id * 3 + 1]) << 2,
.y = (((pb->ipacket[id * 3] & 0x20) << 3) |
pb->ipacket[id * 3 + 2]) << 2,
.p = PSM_FINGER_DEFAULT_P,
.w = PSM_FINGER_DEFAULT_W,
/* HW ver.2 sends bounding box */
.flags = PSM_FINGER_FUZZY
};
break;
case ELANTECH_PKT_V3: /* HW Version 3 */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: N1 N0 W3 W2 0 1 R L
* ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8
* ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[3]: 0 0 W1 W0 0 0 1 0
* ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* -------------------------------------------
*/
nfingers = (pb->ipacket[0] & 0xc0) >> 6;
/* Map 3-rd finger to first finger */
id = nfingers > 2 ? 0 : nfingers - 1;
mask = (1 << (id + 1)) - 1;
if (nfingers == 0)
break;
fn = ELANTECH_FINGER_SET_XYP(pb);
fn.w = ((pb->ipacket[0] & 0x30) >> 2) |
((pb->ipacket[3] & 0x30) >> 4);
/*
* HW v3 dont report exact finger positions when 3 or more
* fingers are on touchpad.
*/
if (nfingers > 1)
fn.flags = PSM_FINGER_FUZZY;
if (nfingers == 2) {
if (ELANTECH_PKT_IS_V3_HEAD(pb, sc->elanhw.hascrc)) {
sc->elanaction.fingers[0] = fn;
return (0);
} else
f[0] = sc->elanaction.fingers[0];
}
f[id] = fn;
break;
case ELANTECH_PKT_V4_STATUS: /* HW Version 4. Status packet */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: . . . . 0 1 R L
* ipacket[1]: . . . F4 F3 F2 F1 F0
* ipacket[2]: . . . . . . . .
* ipacket[3]: . . . 1 0 0 0 0
* ipacket[4]: PL . . . . . . .
* ipacket[5]: . . . . . . . .
* -------------------------------------------
* Fn: finger n is on touchpad
* PL: palm
* HV ver4 sends a status packet to indicate that the numbers
* or identities of the fingers has been changed
*/
mask = pb->ipacket[1] & 0x1f;
nfingers = bitcount(mask);
if (sc->elanaction.mask_v4wait != 0)
VLOG(3, (LOG_DEBUG, "elantech: HW v4 status packet"
" when not all previous head packets received\n"));
/* Bitmap of fingers to receive before gesture processing */
sc->elanaction.mask_v4wait = mask & ~sc->elanaction.mask;
/* Skip "new finger is on touchpad" packets */
if (sc->elanaction.mask_v4wait) {
sc->elanaction.mask = mask;
return (0);
}
break;
case ELANTECH_PKT_V4_HEAD: /* HW Version 4. Head packet */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: W3 W2 W1 W0 0 1 R L
* ipacket[1]: P7 P6 P5 P4 X11 X10 X9 X8
* ipacket[2]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[3]: ID2 ID1 ID0 1 0 0 0 1
* ipacket[4]: P3 P1 P2 P0 Y11 Y10 Y9 Y8
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* -------------------------------------------
* ID: finger id
* HW ver 4 sends head packets in two cases:
* 1. One finger touch and movement.
* 2. Next after status packet to tell new finger positions.
*/
mask = sc->elanaction.mask;
nfingers = bitcount(mask);
id = ((pb->ipacket[3] & 0xe0) >> 5) - 1;
fn = ELANTECH_FINGER_SET_XYP(pb);
fn.w =(pb->ipacket[0] & 0xf0) >> 4;
if (id < 0)
return (0);
/* Packet is finger position update. Report it */
if (sc->elanaction.mask_v4wait == 0) {
if (id < ELANTECH_MAX_FINGERS)
f[id] = fn;
break;
}
/* Remove finger from waiting bitmap and store into context */
sc->elanaction.mask_v4wait &= ~(1 << id);
if (id < ELANTECH_MAX_FINGERS)
sc->elanaction.fingers[id] = fn;
/* Wait for other fingers if needed */
if (sc->elanaction.mask_v4wait != 0)
return (0);
/* All new fingers are received. Report them from context */
for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
if (sc->elanaction.mask & (1 << id))
f[id] = sc->elanaction.fingers[id];
break;
case ELANTECH_PKT_V4_MOTION: /* HW Version 4. Motion packet */
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: ID2 ID1 ID0 OF 0 1 R L
* ipacket[1]: DX7 DX6 DX5 DX4 DX3 DX2 DX1 DX0
* ipacket[2]: DY7 DY6 DY5 DY4 DY3 DY2 DY1 DY0
* ipacket[3]: ID2 ID1 ID0 1 0 0 1 0
* ipacket[4]: DX7 DX6 DX5 DX4 DX3 DX2 DX1 DX0
* ipacket[5]: DY7 DY6 DY5 DY4 DY3 DY2 DY1 DY0
* -------------------------------------------
* OF: delta overflows (> 127 or < -128), in this case
* firmware sends us (delta x / 5) and (delta y / 5)
* ID: finger id
* DX: delta x (two's complement)
* XY: delta y (two's complement)
* byte 0 ~ 2 for one finger
* byte 3 ~ 5 for another finger
*/
mask = sc->elanaction.mask;
nfingers = bitcount(mask);
scale = (pb->ipacket[0] & 0x10) ? 5 : 1;
for (i = 0; i <= 3; i += 3) {
id = ((pb->ipacket[i] & 0xe0) >> 5) - 1;
if (id < 0 || id >= ELANTECH_MAX_FINGERS)
continue;
if (PSM_FINGER_IS_SET(sc->elanaction.fingers[id])) {
f[id] = sc->elanaction.fingers[id];
f[id].x += imax(-f[id].x,
(signed char)pb->ipacket[i+1] * scale);
f[id].y += imax(-f[id].y,
(signed char)pb->ipacket[i+2] * scale);
} else {
VLOG(3, (LOG_DEBUG, "elantech: "
"HW v4 motion packet skipped\n"));
}
}
break;
case ELANTECH_PKT_TRACKPOINT:
/* 7 6 5 4 3 2 1 0 (LSB)
* -------------------------------------------
* ipacket[0]: 0 0 SY SX 0 M R L
* ipacket[1]: ~SX 0 0 0 0 0 0 0
* ipacket[2]: ~SY 0 0 0 0 0 0 0
* ipacket[3]: 0 0 ~SY ~SX 0 1 1 0
* ipacket[4]: X7 X6 X5 X4 X3 X2 X1 X0
* ipacket[5]: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* -------------------------------------------
* X and Y are written in two's complement spread
* over 9 bits with SX/SY the relative top bit and
* X7..X0 and Y7..Y0 the lower bits.
*/
if (!(pb->ipacket[0] & 0xC8) && !(pb->ipacket[1] & 0x7F) &&
!(pb->ipacket[2] & 0x7F) && !(pb->ipacket[3] & 0xC9) &&
!(pb->ipacket[0] & 0x10) != !(pb->ipacket[1] & 0x80) &&
!(pb->ipacket[0] & 0x10) != !(pb->ipacket[3] & 0x10) &&
!(pb->ipacket[0] & 0x20) != !(pb->ipacket[2] & 0x80) &&
!(pb->ipacket[0] & 0x20) != !(pb->ipacket[3] & 0x20)) {
*x = (pb->ipacket[0] & MOUSE_PS2_XNEG) ?
pb->ipacket[4] - 256 : pb->ipacket[4];
*y = (pb->ipacket[0] & MOUSE_PS2_YNEG) ?
pb->ipacket[5] - 256 : pb->ipacket[5];
trackpoint_button =
((pb->ipacket[0] & 0x01) ? MOUSE_BUTTON1DOWN : 0) |
((pb->ipacket[0] & 0x02) ? MOUSE_BUTTON3DOWN : 0) |
((pb->ipacket[0] & 0x04) ? MOUSE_BUTTON2DOWN : 0);
#ifdef EVDEV_SUPPORT
evdev_push_rel(sc->evdev_r, REL_X, *x);
evdev_push_rel(sc->evdev_r, REL_Y, -*y);
evdev_push_mouse_btn(sc->evdev_r, trackpoint_button);
evdev_sync(sc->evdev_r);
#endif
ms->button = touchpad_button | trackpoint_button;
} else
VLOG(3, (LOG_DEBUG, "elantech: "
"unexpected trackpoint packet skipped\n"));
return (0);
case ELANTECH_PKT_NOP:
return (0);
default:
return (-1);
}
for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
if (PSM_FINGER_IS_SET(f[id]))
VLOG(2, (LOG_DEBUG, "elantech: "
"finger %d: down [%d, %d], %d, %d, %d\n", id + 1,
f[id].x, f[id].y, f[id].p, f[id].w, f[id].flags));
/* Touchpad button presses */
if (sc->elanhw.isclickpad) {
touchpad_button =
((pb->ipacket[0] & 0x03) ? MOUSE_BUTTON1DOWN : 0);
} else {
touchpad_button =
((pb->ipacket[0] & 0x01) ? MOUSE_BUTTON1DOWN : 0) |
((pb->ipacket[0] & 0x02) ? MOUSE_BUTTON3DOWN : 0);
}
#ifdef EVDEV_SUPPORT
if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) {
for (id = 0; id < ELANTECH_MAX_FINGERS; id++) {
if (PSM_FINGER_IS_SET(f[id])) {
psm_push_mt_finger(sc, id, &f[id]);
/* Convert touch width to surface units */
evdev_push_abs(sc->evdev_a, ABS_MT_TOUCH_MAJOR,
f[id].w * sc->elanhw.dptracex);
}
if (sc->elanaction.mask & (1 << id) &&
!(mask & (1 << id)))
psm_release_mt_slot(sc->evdev_a, id);
}
evdev_push_key(sc->evdev_a, BTN_TOUCH, nfingers > 0);
evdev_push_nfingers(sc->evdev_a, nfingers);
if (nfingers > 0) {
if (PSM_FINGER_IS_SET(f[0]))
psm_push_st_finger(sc, &f[0]);
} else
evdev_push_abs(sc->evdev_a, ABS_PRESSURE, 0);
evdev_push_mouse_btn(sc->evdev_a, touchpad_button);
evdev_sync(sc->evdev_a);
}
#endif
ms->button = touchpad_button | trackpoint_button;
/* Palm detection doesn't terminate the current action. */
palm = psmpalmdetect(sc, &f[0], nfingers);
/* Send finger 1 position to gesture processor */
if ((PSM_FINGER_IS_SET(f[0]) || PSM_FINGER_IS_SET(f[1]) ||
nfingers == 0) && !palm)
psmgestures(sc, &f[0], imin(nfingers, 3), ms);
/* Send fingers positions to movement smoothers */
for (id = 0; id < PSM_FINGERS; id++)
if (PSM_FINGER_IS_SET(f[id]) || !(mask & (1 << id)))
psmsmoother(sc, &f[id], id, ms, x, y);
/* Store current finger positions in action context */
for (id = 0; id < ELANTECH_MAX_FINGERS; id++) {
if (PSM_FINGER_IS_SET(f[id]))
sc->elanaction.fingers[id] = f[id];
if ((sc->elanaction.mask & (1 << id)) && !(mask & (1 << id)))
PSM_FINGER_RESET(sc->elanaction.fingers[id]);
}
sc->elanaction.mask = mask;
if (palm) {
*x = *y = *z = 0;
ms->button = ms->obutton;
return (0);
}
/* Use the extra buttons as a scrollwheel */
if (ms->button & MOUSE_BUTTON4DOWN)
*z = -1;
else if (ms->button & MOUSE_BUTTON5DOWN)
*z = 1;
else if (ms->button & MOUSE_BUTTON6DOWN)
*z = -2;
else if (ms->button & MOUSE_BUTTON7DOWN)
*z = 2;
else
*z = 0;
ms->button &= ~(MOUSE_BUTTON4DOWN | MOUSE_BUTTON5DOWN |
MOUSE_BUTTON6DOWN | MOUSE_BUTTON7DOWN);
return (0);
}
static void
proc_versapad(struct psm_softc *sc, packetbuf_t *pb, mousestatus_t *ms,
int *x, int *y, int *z)
{
static int butmap_versapad[8] = {
0,
MOUSE_BUTTON3DOWN,
0,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN
};
int c, x0, y0;
/* VersaPad PS/2 absolute mode message format
*
* [packet1] 7 6 5 4 3 2 1 0(LSB)
* ipacket[0]: 1 1 0 A 1 L T R
* ipacket[1]: H7 H6 H5 H4 H3 H2 H1 H0
* ipacket[2]: V7 V6 V5 V4 V3 V2 V1 V0
* ipacket[3]: 1 1 1 A 1 L T R
* ipacket[4]:V11 V10 V9 V8 H11 H10 H9 H8
* ipacket[5]: 0 P6 P5 P4 P3 P2 P1 P0
*
* [note]
* R: right physical mouse button (1=on)
* T: touch pad virtual button (1=tapping)
* L: left physical mouse button (1=on)
* A: position data is valid (1=valid)
* H: horizontal data (12bit signed integer. H11 is sign bit.)
* V: vertical data (12bit signed integer. V11 is sign bit.)
* P: pressure data
*
* Tapping is mapped to MOUSE_BUTTON4.
*/
c = pb->ipacket[0];
*x = *y = 0;
ms->button = butmap_versapad[c & MOUSE_PS2VERSA_BUTTONS];
ms->button |= (c & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
if (c & MOUSE_PS2VERSA_IN_USE) {
x0 = pb->ipacket[1] | (((pb->ipacket[4]) & 0x0f) << 8);
y0 = pb->ipacket[2] | (((pb->ipacket[4]) & 0xf0) << 4);
if (x0 & 0x800)
x0 -= 0x1000;
if (y0 & 0x800)
y0 -= 0x1000;
if (sc->flags & PSM_FLAGS_FINGERDOWN) {
*x = sc->xold - x0;
*y = y0 - sc->yold;
if (*x < 0) /* XXX */
++*x;
else if (*x)
--*x;
if (*y < 0)
++*y;
else if (*y)
--*y;
} else
sc->flags |= PSM_FLAGS_FINGERDOWN;
sc->xold = x0;
sc->yold = y0;
} else
sc->flags &= ~PSM_FLAGS_FINGERDOWN;
}
static void
psmsoftintridle(void *arg)
{
struct psm_softc *sc = arg;
packetbuf_t *pb;
/* Invoke soft handler only when pqueue is empty. Otherwise it will be
* invoked from psmintr soon with pqueue filled with real data */
if (sc->pqueue_start == sc->pqueue_end &&
sc->idlepacket.inputbytes > 0) {
/* Grow circular queue backwards to avoid race with psmintr */
if (--sc->pqueue_start < 0)
sc->pqueue_start = PSM_PACKETQUEUE - 1;
pb = &sc->pqueue[sc->pqueue_start];
memcpy(pb, &sc->idlepacket, sizeof(packetbuf_t));
VLOG(4, (LOG_DEBUG,
"psmsoftintridle: %02x %02x %02x %02x %02x %02x\n",
pb->ipacket[0], pb->ipacket[1], pb->ipacket[2],
pb->ipacket[3], pb->ipacket[4], pb->ipacket[5]));
psmsoftintr(arg);
}
}
static void
psmsoftintr(void *arg)
{
/*
* the table to turn PS/2 mouse button bits (MOUSE_PS2_BUTTON?DOWN)
* into `mousestatus' button bits (MOUSE_BUTTON?DOWN).
*/
static int butmap[8] = {
0,
MOUSE_BUTTON1DOWN,
MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON2DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
};
struct psm_softc *sc = arg;
mousestatus_t ms;
packetbuf_t *pb;
int x, y, z, c, l, s;
getmicrouptime(&sc->lastsoftintr);
s = spltty();
do {
pb = &sc->pqueue[sc->pqueue_start];
if (sc->mode.level == PSM_LEVEL_NATIVE)
goto next_native;
c = pb->ipacket[0];
/*
* A kludge for Kensington device!
* The MSB of the horizontal count appears to be stored in
* a strange place.
*/
if (sc->hw.model == MOUSE_MODEL_THINK)
pb->ipacket[1] |= (c & MOUSE_PS2_XOVERFLOW) ? 0x80 : 0;
/* ignore the overflow bits... */
x = (c & MOUSE_PS2_XNEG) ?
pb->ipacket[1] - 256 : pb->ipacket[1];
y = (c & MOUSE_PS2_YNEG) ?
pb->ipacket[2] - 256 : pb->ipacket[2];
z = 0;
ms.obutton = sc->button; /* previous button state */
ms.button = butmap[c & MOUSE_PS2_BUTTONS];
/* `tapping' action */
if (sc->config & PSM_CONFIG_FORCETAP)
ms.button |= ((c & MOUSE_PS2_TAP)) ?
0 : MOUSE_BUTTON4DOWN;
timevalclear(&sc->idletimeout);
sc->idlepacket.inputbytes = 0;
switch (sc->hw.model) {
case MOUSE_MODEL_EXPLORER:
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: oy ox sy sx 1 M R L
* byte 2: x x x x x x x x
* byte 3: y y y y y y y y
* byte 4: * * S2 S1 s d2 d1 d0
*
* L, M, R, S1, S2: left, middle, right and side buttons
* s: wheel data sign bit
* d2-d0: wheel data
*/
z = (pb->ipacket[3] & MOUSE_EXPLORER_ZNEG) ?
(pb->ipacket[3] & 0x0f) - 16 :
(pb->ipacket[3] & 0x0f);
ms.button |=
(pb->ipacket[3] & MOUSE_EXPLORER_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |=
(pb->ipacket[3] & MOUSE_EXPLORER_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_INTELLI:
case MOUSE_MODEL_NET:
/* wheel data is in the fourth byte */
z = (char)pb->ipacket[3];
/*
* XXX some mice may send 7 when there is no Z movement? */
if ((z >= 7) || (z <= -7))
z = 0;
/* some compatible mice have additional buttons */
ms.button |= (c & MOUSE_PS2INTELLI_BUTTON4DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |= (c & MOUSE_PS2INTELLI_BUTTON5DOWN) ?
MOUSE_BUTTON5DOWN : 0;
break;
case MOUSE_MODEL_MOUSEMANPLUS:
proc_mmanplus(sc, pb, &ms, &x, &y, &z);
break;
case MOUSE_MODEL_GLIDEPOINT:
/* `tapping' action */
ms.button |= ((c & MOUSE_PS2_TAP)) ? 0 :
MOUSE_BUTTON4DOWN;
break;
case MOUSE_MODEL_NETSCROLL:
/*
* three additional bytes encode buttons and
* wheel events
*/
ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON3DOWN) ?
MOUSE_BUTTON4DOWN : 0;
ms.button |= (pb->ipacket[3] & MOUSE_PS2_BUTTON1DOWN) ?
MOUSE_BUTTON5DOWN : 0;
z = (pb->ipacket[3] & MOUSE_PS2_XNEG) ?
pb->ipacket[4] - 256 : pb->ipacket[4];
break;
case MOUSE_MODEL_THINK:
/* the fourth button state in the first byte */
ms.button |= (c & MOUSE_PS2_TAP) ?
MOUSE_BUTTON4DOWN : 0;
break;
case MOUSE_MODEL_VERSAPAD:
proc_versapad(sc, pb, &ms, &x, &y, &z);
c = ((x < 0) ? MOUSE_PS2_XNEG : 0) |
((y < 0) ? MOUSE_PS2_YNEG : 0);
break;
case MOUSE_MODEL_4D:
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: s2 d2 s1 d1 1 M R L
* byte 2: sx x x x x x x x
* byte 3: sy y y y y y y y
*
* s1: wheel 1 direction
* d1: wheel 1 data
* s2: wheel 2 direction
* d2: wheel 2 data
*/
x = (pb->ipacket[1] & 0x80) ?
pb->ipacket[1] - 256 : pb->ipacket[1];
y = (pb->ipacket[2] & 0x80) ?
pb->ipacket[2] - 256 : pb->ipacket[2];
switch (c & MOUSE_4D_WHEELBITS) {
case 0x10:
z = 1;
break;
case 0x30:
z = -1;
break;
case 0x40: /* XXX 2nd wheel turning right */
z = 2;
break;
case 0xc0: /* XXX 2nd wheel turning left */
z = -2;
break;
}
break;
case MOUSE_MODEL_4DPLUS:
if ((x < 16 - 256) && (y < 16 - 256)) {
/*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: 0 0 1 1 1 M R L
* byte 2: 0 0 0 0 1 0 0 0
* byte 3: 0 0 0 0 S s d1 d0
*
* L, M, R, S: left, middle, right,
* and side buttons
* s: wheel data sign bit
* d1-d0: wheel data
*/
x = y = 0;
if (pb->ipacket[2] & MOUSE_4DPLUS_BUTTON4DOWN)
ms.button |= MOUSE_BUTTON4DOWN;
z = (pb->ipacket[2] & MOUSE_4DPLUS_ZNEG) ?
((pb->ipacket[2] & 0x07) - 8) :
(pb->ipacket[2] & 0x07) ;
} else {
/* preserve previous button states */
ms.button |= ms.obutton & MOUSE_EXTBUTTONS;
}
break;
case MOUSE_MODEL_SYNAPTICS:
if (pb->inputbytes == MOUSE_PS2_PACKETSIZE)
if (proc_synaptics_mux(sc, pb))
goto next;
if (proc_synaptics(sc, pb, &ms, &x, &y, &z) != 0) {
VLOG(3, (LOG_DEBUG, "synaptics: "
"packet rejected\n"));
goto next;
}
break;
case MOUSE_MODEL_ELANTECH:
if (proc_elantech(sc, pb, &ms, &x, &y, &z) != 0) {
VLOG(3, (LOG_DEBUG, "elantech: "
"packet rejected\n"));
goto next;
}
break;
case MOUSE_MODEL_TRACKPOINT:
case MOUSE_MODEL_GENERIC:
default:
break;
}
#ifdef EVDEV_SUPPORT
if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE &&
sc->hw.model != MOUSE_MODEL_ELANTECH &&
sc->hw.model != MOUSE_MODEL_SYNAPTICS) {
evdev_push_rel(sc->evdev_r, REL_X, x);
evdev_push_rel(sc->evdev_r, REL_Y, -y);
switch (sc->hw.model) {
case MOUSE_MODEL_EXPLORER:
case MOUSE_MODEL_INTELLI:
case MOUSE_MODEL_NET:
case MOUSE_MODEL_NETSCROLL:
case MOUSE_MODEL_4DPLUS:
evdev_push_rel(sc->evdev_r, REL_WHEEL, -z);
break;
case MOUSE_MODEL_MOUSEMANPLUS:
case MOUSE_MODEL_4D:
switch (z) {
case 1:
case -1:
evdev_push_rel(sc->evdev_r, REL_WHEEL, -z);
break;
case 2:
case -2:
evdev_push_rel(sc->evdev_r, REL_HWHEEL, z / 2);
break;
}
break;
}
evdev_push_mouse_btn(sc->evdev_r, ms.button);
evdev_sync(sc->evdev_r);
}
#endif
/* scale values */
if (sc->mode.accelfactor >= 1) {
if (x != 0) {
x = x * x / sc->mode.accelfactor;
if (x == 0)
x = 1;
if (c & MOUSE_PS2_XNEG)
x = -x;
}
if (y != 0) {
y = y * y / sc->mode.accelfactor;
if (y == 0)
y = 1;
if (c & MOUSE_PS2_YNEG)
y = -y;
}
}
/* Store last packet for reinjection if it has not been set already */
if (timevalisset(&sc->idletimeout) && sc->idlepacket.inputbytes == 0)
sc->idlepacket = *pb;
ms.dx = x;
ms.dy = y;
ms.dz = z;
ms.flags = ((x || y || z) ? MOUSE_POSCHANGED : 0) |
(ms.obutton ^ ms.button);
pb->inputbytes = tame_mouse(sc, pb, &ms, pb->ipacket);
sc->status.flags |= ms.flags;
sc->status.dx += ms.dx;
sc->status.dy += ms.dy;
sc->status.dz += ms.dz;
sc->status.button = ms.button;
sc->button = ms.button;
next_native:
sc->watchdog = FALSE;
/* queue data */
if (sc->queue.count + pb->inputbytes < sizeof(sc->queue.buf)) {
l = imin(pb->inputbytes,
sizeof(sc->queue.buf) - sc->queue.tail);
bcopy(&pb->ipacket[0], &sc->queue.buf[sc->queue.tail], l);
if (pb->inputbytes > l)
bcopy(&pb->ipacket[l], &sc->queue.buf[0],
pb->inputbytes - l);
sc->queue.tail = (sc->queue.tail + pb->inputbytes) %
sizeof(sc->queue.buf);
sc->queue.count += pb->inputbytes;
}
next:
pb->inputbytes = 0;
if (++sc->pqueue_start >= PSM_PACKETQUEUE)
sc->pqueue_start = 0;
} while (sc->pqueue_start != sc->pqueue_end);
if (sc->state & PSM_ASLP) {
sc->state &= ~PSM_ASLP;
wakeup(sc);
}
selwakeuppri(&sc->rsel, PZERO);
if (sc->async != NULL) {
pgsigio(&sc->async, SIGIO, 0);
}
sc->state &= ~PSM_SOFTARMED;
/* schedule injection of predefined packet after idletimeout
* if no data packets have been received from psmintr */
if (timevalisset(&sc->idletimeout)) {
sc->state |= PSM_SOFTARMED;
callout_reset(&sc->softcallout, tvtohz(&sc->idletimeout),
psmsoftintridle, sc);
VLOG(2, (LOG_DEBUG, "softintr: callout set: %d ticks\n",
tvtohz(&sc->idletimeout)));
}
splx(s);
}
static int
psmpoll(struct cdev *dev, int events, struct thread *td)
{
struct psm_softc *sc = dev->si_drv1;
int s;
int revents = 0;
/* Return true if a mouse event available */
s = spltty();
if (events & (POLLIN | POLLRDNORM)) {
if (sc->queue.count > 0)
revents |= events & (POLLIN | POLLRDNORM);
else
selrecord(td, &sc->rsel);
}
splx(s);
return (revents);
}
/* vendor/model specific routines */
static int mouse_id_proc1(KBDC kbdc, int res, int scale, int *status)
{
if (set_mouse_resolution(kbdc, res) != res)
return (FALSE);
if (set_mouse_scaling(kbdc, scale) &&
set_mouse_scaling(kbdc, scale) &&
set_mouse_scaling(kbdc, scale) &&
(get_mouse_status(kbdc, status, 0, 3) >= 3))
return (TRUE);
return (FALSE);
}
static int
mouse_ext_command(KBDC kbdc, int command)
{
int c;
c = (command >> 6) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 4) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 2) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
c = (command >> 0) & 0x03;
if (set_mouse_resolution(kbdc, c) != c)
return (FALSE);
return (TRUE);
}
#ifdef notyet
/* Logitech MouseMan Cordless II */
static int
enable_lcordless(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int status[3];
int ch;
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 2, status))
return (FALSE);
if (status[1] == PSMD_RES_HIGH)
return (FALSE);
ch = (status[0] & 0x07) - 1; /* channel # */
if ((ch <= 0) || (ch > 4))
return (FALSE);
/*
* status[1]: always one?
* status[2]: battery status? (0-100)
*/
return (TRUE);
}
#endif /* notyet */
/* Genius NetScroll Mouse, MouseSystems SmartScroll Mouse */
static int
enable_groller(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int status[3];
/*
* The special sequence to enable the fourth button and the
* roller. Immediately after this sequence check status bytes.
* if the mouse is NetScroll, the second and the third bytes are
* '3' and 'D'.
*/
/*
* If the mouse is an ordinary PS/2 mouse, the status bytes should
* look like the following.
*
* byte 1 bit 7 always 0
* bit 6 stream mode (0)
* bit 5 disabled (0)
* bit 4 1:1 scaling (0)
* bit 3 always 0
* bit 0-2 button status
* byte 2 resolution (PSMD_RES_HIGH)
* byte 3 report rate (?)
*/
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
return (FALSE);
if ((status[1] != '3') || (status[2] != 'D'))
return (FALSE);
/* FIXME: SmartScroll Mouse has 5 buttons! XXX */
if (arg == PROBE)
sc->hw.buttons = 4;
return (TRUE);
}
/* Genius NetMouse/NetMouse Pro, ASCII Mie Mouse, NetScroll Optical */
static int
enable_gmouse(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int status[3];
/*
* The special sequence to enable the middle, "rubber" button.
* Immediately after this sequence check status bytes.
* if the mouse is NetMouse, NetMouse Pro, or ASCII MIE Mouse,
* the second and the third bytes are '3' and 'U'.
* NOTE: NetMouse reports that it has three buttons although it has
* two buttons and a rubber button. NetMouse Pro and MIE Mouse
* say they have three buttons too and they do have a button on the
* side...
*/
if (!mouse_id_proc1(kbdc, PSMD_RES_HIGH, 1, status))
return (FALSE);
if ((status[1] != '3') || (status[2] != 'U'))
return (FALSE);
return (TRUE);
}
/* ALPS GlidePoint */
static int
enable_aglide(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int status[3];
/*
* The special sequence to obtain ALPS GlidePoint specific
* information. Immediately after this sequence, status bytes will
* contain something interesting.
* NOTE: ALPS produces several models of GlidePoint. Some of those
* do not respond to this sequence, thus, cannot be detected this way.
*/
if (set_mouse_sampling_rate(kbdc, 100) != 100)
return (FALSE);
if (!mouse_id_proc1(kbdc, PSMD_RES_LOW, 2, status))
return (FALSE);
if ((status[1] == PSMD_RES_LOW) || (status[2] == 100))
return (FALSE);
return (TRUE);
}
/* Kensington ThinkingMouse/Trackball */
static int
enable_kmouse(struct psm_softc *sc, enum probearg arg)
{
static u_char rate[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 };
KBDC kbdc = sc->kbdc;
int status[3];
int id1;
int id2;
int i;
id1 = get_aux_id(kbdc);
if (set_mouse_sampling_rate(kbdc, 10) != 10)
return (FALSE);
/*
* The device is now in the native mode? It returns a different
* ID value...
*/
id2 = get_aux_id(kbdc);
if ((id1 == id2) || (id2 != 2))
return (FALSE);
if (set_mouse_resolution(kbdc, PSMD_RES_LOW) != PSMD_RES_LOW)
return (FALSE);
#if PSM_DEBUG >= 2
/* at this point, resolution is LOW, sampling rate is 10/sec */
if (get_mouse_status(kbdc, status, 0, 3) < 3)
return (FALSE);
#endif
/*
* The special sequence to enable the third and fourth buttons.
* Otherwise they behave like the first and second buttons.
*/
for (i = 0; i < nitems(rate); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
/*
* At this point, the device is using default resolution and
* sampling rate for the native mode.
*/
if (get_mouse_status(kbdc, status, 0, 3) < 3)
return (FALSE);
if ((status[1] == PSMD_RES_LOW) || (status[2] == rate[i - 1]))
return (FALSE);
/* the device appears be enabled by this sequence, diable it for now */
disable_aux_dev(kbdc);
empty_aux_buffer(kbdc, 5);
return (TRUE);
}
/* Logitech MouseMan+/FirstMouse+, IBM ScrollPoint Mouse */
static int
enable_mmanplus(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int data[3];
/* the special sequence to enable the fourth button and the roller. */
/*
* NOTE: for ScrollPoint to respond correctly, the SET_RESOLUTION
* must be called exactly three times since the last RESET command
* before this sequence. XXX
*/
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (!mouse_ext_command(kbdc, 0x39) || !mouse_ext_command(kbdc, 0xdb))
return (FALSE);
if (get_mouse_status(kbdc, data, 1, 3) < 3)
return (FALSE);
/*
* PS2++ protocol, packet type 0
*
* b7 b6 b5 b4 b3 b2 b1 b0
* byte 1: * 1 p3 p2 1 * * *
* byte 2: 1 1 p1 p0 m1 m0 1 0
* byte 3: m7 m6 m5 m4 m3 m2 m1 m0
*
* p3-p0: packet type: 0
* m7-m0: model ID: MouseMan+:0x50,
* FirstMouse+:0x51,
* ScrollPoint:0x58...
*/
/* check constant bits */
if ((data[0] & MOUSE_PS2PLUS_SYNCMASK) != MOUSE_PS2PLUS_SYNC)
return (FALSE);
if ((data[1] & 0xc3) != 0xc2)
return (FALSE);
/* check d3-d0 in byte 2 */
if (!MOUSE_PS2PLUS_CHECKBITS(data))
return (FALSE);
/* check p3-p0 */
if (MOUSE_PS2PLUS_PACKET_TYPE(data) != 0)
return (FALSE);
if (arg == PROBE) {
sc->hw.hwid &= 0x00ff;
sc->hw.hwid |= data[2] << 8; /* save model ID */
}
/*
* MouseMan+ (or FirstMouse+) is now in its native mode, in which
* the wheel and the fourth button events are encoded in the
* special data packet. The mouse may be put in the IntelliMouse mode
* if it is initialized by the IntelliMouse's method.
*/
return (TRUE);
}
/* MS IntelliMouse Explorer */
static int
enable_msexplorer(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
static u_char rate0[] = { 200, 100, 80, };
static u_char rate1[] = { 200, 200, 80, };
int id;
int i;
/*
* This is needed for at least A4Tech X-7xx mice - they do not go
* straight to Explorer mode, but need to be set to Intelli mode
* first.
*/
enable_msintelli(sc, arg);
/* the special sequence to enable the extra buttons and the roller. */
for (i = 0; i < nitems(rate1); ++i)
if (set_mouse_sampling_rate(kbdc, rate1[i]) != rate1[i])
return (FALSE);
/* the device will give the genuine ID only after the above sequence */
id = get_aux_id(kbdc);
if (id != PSM_EXPLORER_ID)
return (FALSE);
if (arg == PROBE) {
sc->hw.buttons = 5; /* IntelliMouse Explorer XXX */
sc->hw.hwid = id;
}
/*
* XXX: this is a kludge to fool some KVM switch products
* which think they are clever enough to know the 4-byte IntelliMouse
* protocol, and assume any other protocols use 3-byte packets.
* They don't convey 4-byte data packets from the IntelliMouse Explorer
* correctly to the host computer because of this!
* The following sequence is actually IntelliMouse's "wake up"
* sequence; it will make the KVM think the mouse is IntelliMouse
* when it is in fact IntelliMouse Explorer.
*/
for (i = 0; i < nitems(rate0); ++i)
if (set_mouse_sampling_rate(kbdc, rate0[i]) != rate0[i])
break;
get_aux_id(kbdc);
return (TRUE);
}
/*
* MS IntelliMouse
* Logitech MouseMan+ and FirstMouse+ will also respond to this
* probe routine and act like IntelliMouse.
*/
static int
enable_msintelli(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
static u_char rate[] = { 200, 100, 80, };
int id;
int i;
/* the special sequence to enable the third button and the roller. */
for (i = 0; i < nitems(rate); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
/* the device will give the genuine ID only after the above sequence */
id = get_aux_id(kbdc);
if (id != PSM_INTELLI_ID)
return (FALSE);
if (arg == PROBE) {
sc->hw.buttons = 3;
sc->hw.hwid = id;
}
return (TRUE);
}
/*
* A4 Tech 4D Mouse
* Newer wheel mice from A4 Tech may use the 4D+ protocol.
*/
static int
enable_4dmouse(struct psm_softc *sc, enum probearg arg)
{
static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
KBDC kbdc = sc->kbdc;
int id;
int i;
for (i = 0; i < nitems(rate); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
id = get_aux_id(kbdc);
/*
* WinEasy 4D, 4 Way Scroll 4D: 6
* Cable-Free 4D: 8 (4DPLUS)
* WinBest 4D+, 4 Way Scroll 4D+: 8 (4DPLUS)
*/
if (id != PSM_4DMOUSE_ID)
return (FALSE);
if (arg == PROBE) {
sc->hw.buttons = 3; /* XXX some 4D mice have 4? */
sc->hw.hwid = id;
}
return (TRUE);
}
/*
* A4 Tech 4D+ Mouse
* Newer wheel mice from A4 Tech seem to use this protocol.
* Older models are recognized as either 4D Mouse or IntelliMouse.
*/
static int
enable_4dplus(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int id;
/*
* enable_4dmouse() already issued the following ID sequence...
static u_char rate[] = { 200, 100, 80, 60, 40, 20 };
int i;
for (i = 0; i < sizeof(rate)/sizeof(rate[0]); ++i)
if (set_mouse_sampling_rate(kbdc, rate[i]) != rate[i])
return (FALSE);
*/
id = get_aux_id(kbdc);
switch (id) {
case PSM_4DPLUS_ID:
break;
case PSM_4DPLUS_RFSW35_ID:
break;
default:
return (FALSE);
}
if (arg == PROBE) {
sc->hw.buttons = (id == PSM_4DPLUS_ID) ? 4 : 3;
sc->hw.hwid = id;
}
return (TRUE);
}
/* Synaptics Touchpad */
static int
synaptics_sysctl(SYSCTL_HANDLER_ARGS)
{
struct psm_softc *sc;
int error, arg;
if (oidp->oid_arg1 == NULL || oidp->oid_arg2 < 0 ||
oidp->oid_arg2 > SYNAPTICS_SYSCTL_LAST)
return (EINVAL);
sc = oidp->oid_arg1;
/* Read the current value. */
arg = *(int *)((char *)sc + oidp->oid_arg2);
error = sysctl_handle_int(oidp, &arg, 0, req);
/* Sanity check. */
if (error || !req->newptr)
return (error);
/*
* Check that the new value is in the concerned node's range
* of values.
*/
switch (oidp->oid_arg2) {
case SYNAPTICS_SYSCTL_MIN_PRESSURE:
case SYNAPTICS_SYSCTL_MAX_PRESSURE:
if (arg < 0 || arg > 255)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MAX_WIDTH:
if (arg < 4 || arg > 15)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MARGIN_TOP:
case SYNAPTICS_SYSCTL_MARGIN_BOTTOM:
case SYNAPTICS_SYSCTL_NA_TOP:
case SYNAPTICS_SYSCTL_NA_BOTTOM:
if (arg < 0 || arg > sc->synhw.maximumYCoord)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_SOFTBUTTON2_X:
case SYNAPTICS_SYSCTL_SOFTBUTTON3_X:
/* Softbuttons is clickpad only feature */
if (!sc->synhw.capClickPad && arg != 0)
return (EINVAL);
/* FALLTHROUGH */
case SYNAPTICS_SYSCTL_MARGIN_RIGHT:
case SYNAPTICS_SYSCTL_MARGIN_LEFT:
case SYNAPTICS_SYSCTL_NA_RIGHT:
case SYNAPTICS_SYSCTL_NA_LEFT:
if (arg < 0 || arg > sc->synhw.maximumXCoord)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_WINDOW_MIN:
case SYNAPTICS_SYSCTL_WINDOW_MAX:
case SYNAPTICS_SYSCTL_TAP_MIN_QUEUE:
if (arg < 1 || arg > SYNAPTICS_PACKETQUEUE)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_MULTIPLICATOR:
case SYNAPTICS_SYSCTL_WEIGHT_CURRENT:
case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS:
case SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA:
case SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED:
case SYNAPTICS_SYSCTL_DIV_MIN:
case SYNAPTICS_SYSCTL_DIV_MAX:
case SYNAPTICS_SYSCTL_DIV_MAX_NA:
case SYNAPTICS_SYSCTL_DIV_LEN:
case SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN:
case SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX:
if (arg < 1)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_TAP_MAX_DELTA:
case SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT:
case SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA:
if (arg < 0)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA:
if (arg < -sc->synhw.maximumXCoord ||
arg > sc->synhw.maximumXCoord)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_SOFTBUTTONS_Y:
/* Softbuttons is clickpad only feature */
if (!sc->synhw.capClickPad && arg != 0)
return (EINVAL);
/* FALLTHROUGH */
case SYNAPTICS_SYSCTL_VSCROLL_VER_AREA:
if (arg < -sc->synhw.maximumYCoord ||
arg > sc->synhw.maximumYCoord)
return (EINVAL);
break;
case SYNAPTICS_SYSCTL_TOUCHPAD_OFF:
case SYNAPTICS_SYSCTL_THREE_FINGER_DRAG:
case SYNAPTICS_SYSCTL_NATURAL_SCROLL:
if (arg < 0 || arg > 1)
return (EINVAL);
break;
default:
return (EINVAL);
}
/* Update. */
*(int *)((char *)sc + oidp->oid_arg2) = arg;
return (error);
}
static void
synaptics_sysctl_create_softbuttons_tree(struct psm_softc *sc)
{
/*
* Set predefined sizes for softbuttons.
* Values are taken to match HP Pavilion dv6 clickpad drawings
* with thin middle softbutton placed on separator
*/
/* hw.psm.synaptics.softbuttons_y */
sc->syninfo.softbuttons_y = sc->synhw.topButtonPad ? -1700 : 1700;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"softbuttons_y", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_SOFTBUTTONS_Y,
synaptics_sysctl, "I",
"Vertical size of softbuttons area");
/* hw.psm.synaptics.softbutton2_x */
sc->syninfo.softbutton2_x = 3100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"softbutton2_x", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_SOFTBUTTON2_X,
synaptics_sysctl, "I",
"Horisontal position of 2-nd softbutton left edge (0-disable)");
/* hw.psm.synaptics.softbutton3_x */
sc->syninfo.softbutton3_x = 3900;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"softbutton3_x", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_SOFTBUTTON3_X,
synaptics_sysctl, "I",
"Horisontal position of 3-rd softbutton left edge (0-disable)");
}
static void
synaptics_sysctl_create_tree(struct psm_softc *sc, const char *name,
const char *descr)
{
if (sc->syninfo.sysctl_tree != NULL)
return;
/* Attach extra synaptics sysctl nodes under hw.psm.synaptics */
sysctl_ctx_init(&sc->syninfo.sysctl_ctx);
sc->syninfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->syninfo.sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, name, CTLFLAG_RD,
0, descr);
/* hw.psm.synaptics.directional_scrolls. */
sc->syninfo.directional_scrolls = 0;
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"directional_scrolls", CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.directional_scrolls, 0,
"Enable hardware scrolling pad (if non-zero) or register it as "
"extended buttons (if 0)");
/* hw.psm.synaptics.max_x. */
sc->syninfo.max_x = 6143;
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_x", CTLFLAG_RD|CTLFLAG_ANYBODY,
&sc->syninfo.max_x, 0,
"Horizontal reporting range");
/* hw.psm.synaptics.max_y. */
sc->syninfo.max_y = 6143;
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_y", CTLFLAG_RD|CTLFLAG_ANYBODY,
&sc->syninfo.max_y, 0,
"Vertical reporting range");
/*
* Turn off two finger scroll if we have a
* physical area reserved for scrolling or when
* there's no multi finger support.
*/
if (sc->synhw.verticalScroll || (sc->synhw.capMultiFinger == 0 &&
sc->synhw.capAdvancedGestures == 0))
sc->syninfo.two_finger_scroll = 0;
else
sc->syninfo.two_finger_scroll = 1;
/* hw.psm.synaptics.two_finger_scroll. */
SYSCTL_ADD_INT(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"two_finger_scroll", CTLFLAG_RW|CTLFLAG_ANYBODY,
&sc->syninfo.two_finger_scroll, 0,
"Enable two finger scrolling");
/* hw.psm.synaptics.min_pressure. */
sc->syninfo.min_pressure = 32;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"min_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MIN_PRESSURE,
synaptics_sysctl, "I",
"Minimum pressure required to start an action");
/* hw.psm.synaptics.max_pressure. */
sc->syninfo.max_pressure = 220;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_pressure", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MAX_PRESSURE,
synaptics_sysctl, "I",
"Maximum pressure to detect palm");
/* hw.psm.synaptics.max_width. */
sc->syninfo.max_width = 10;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"max_width", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MAX_WIDTH,
synaptics_sysctl, "I",
"Maximum finger width to detect palm");
/* hw.psm.synaptics.top_margin. */
sc->syninfo.margin_top = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MARGIN_TOP,
synaptics_sysctl, "I",
"Top margin");
/* hw.psm.synaptics.right_margin. */
sc->syninfo.margin_right = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MARGIN_RIGHT,
synaptics_sysctl, "I",
"Right margin");
/* hw.psm.synaptics.bottom_margin. */
sc->syninfo.margin_bottom = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MARGIN_BOTTOM,
synaptics_sysctl, "I",
"Bottom margin");
/* hw.psm.synaptics.left_margin. */
sc->syninfo.margin_left = 200;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"margin_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MARGIN_LEFT,
synaptics_sysctl, "I",
"Left margin");
/* hw.psm.synaptics.na_top. */
sc->syninfo.na_top = 1783;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_top", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_NA_TOP,
synaptics_sysctl, "I",
"Top noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_right. */
sc->syninfo.na_right = 563;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_right", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_NA_RIGHT,
synaptics_sysctl, "I",
"Right noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_bottom. */
sc->syninfo.na_bottom = 1408;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_bottom", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_NA_BOTTOM,
synaptics_sysctl, "I",
"Bottom noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.na_left. */
sc->syninfo.na_left = 1600;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"na_left", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_NA_LEFT,
synaptics_sysctl, "I",
"Left noisy area, where weight_previous_na is used instead "
"of weight_previous");
/* hw.psm.synaptics.window_min. */
sc->syninfo.window_min = 4;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"window_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WINDOW_MIN,
synaptics_sysctl, "I",
"Minimum window size to start an action");
/* hw.psm.synaptics.window_max. */
sc->syninfo.window_max = 10;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"window_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WINDOW_MAX,
synaptics_sysctl, "I",
"Maximum window size");
/* hw.psm.synaptics.multiplicator. */
sc->syninfo.multiplicator = 10000;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"multiplicator", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_MULTIPLICATOR,
synaptics_sysctl, "I",
"Multiplicator to increase precision in averages and divisions");
/* hw.psm.synaptics.weight_current. */
sc->syninfo.weight_current = 3;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_current", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WEIGHT_CURRENT,
synaptics_sysctl, "I",
"Weight of the current movement in the new average");
/* hw.psm.synaptics.weight_previous. */
sc->syninfo.weight_previous = 6;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_previous", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS,
synaptics_sysctl, "I",
"Weight of the previous average");
/* hw.psm.synaptics.weight_previous_na. */
sc->syninfo.weight_previous_na = 20;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_previous_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WEIGHT_PREVIOUS_NA,
synaptics_sysctl, "I",
"Weight of the previous average (inside the noisy area)");
/* hw.psm.synaptics.weight_len_squared. */
sc->syninfo.weight_len_squared = 2000;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"weight_len_squared", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_WEIGHT_LEN_SQUARED,
synaptics_sysctl, "I",
"Length (squared) of segments where weight_previous "
"starts to decrease");
/* hw.psm.synaptics.div_min. */
sc->syninfo.div_min = 9;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_DIV_MIN,
synaptics_sysctl, "I",
"Divisor for fast movements");
/* hw.psm.synaptics.div_max. */
sc->syninfo.div_max = 17;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_DIV_MAX,
synaptics_sysctl, "I",
"Divisor for slow movements");
/* hw.psm.synaptics.div_max_na. */
sc->syninfo.div_max_na = 30;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_max_na", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_DIV_MAX_NA,
synaptics_sysctl, "I",
"Divisor with slow movements (inside the noisy area)");
/* hw.psm.synaptics.div_len. */
sc->syninfo.div_len = 100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"div_len", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_DIV_LEN,
synaptics_sysctl, "I",
"Length of segments where div_max starts to decrease");
/* hw.psm.synaptics.tap_max_delta. */
sc->syninfo.tap_max_delta = 80;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"tap_max_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_TAP_MAX_DELTA,
synaptics_sysctl, "I",
"Length of segments above which a tap is ignored");
/* hw.psm.synaptics.tap_min_queue. */
sc->syninfo.tap_min_queue = 2;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"tap_min_queue", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_TAP_MIN_QUEUE,
synaptics_sysctl, "I",
"Number of packets required to consider a tap");
/* hw.psm.synaptics.taphold_timeout. */
sc->gesture.in_taphold = 0;
sc->syninfo.taphold_timeout = tap_timeout;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"taphold_timeout", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_TAPHOLD_TIMEOUT,
synaptics_sysctl, "I",
"Maximum elapsed time between two taps to consider a tap-hold "
"action");
/* hw.psm.synaptics.vscroll_hor_area. */
sc->syninfo.vscroll_hor_area = 0; /* 1300 */
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_hor_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_HOR_AREA,
synaptics_sysctl, "I",
"Area reserved for horizontal virtual scrolling");
/* hw.psm.synaptics.vscroll_ver_area. */
sc->syninfo.vscroll_ver_area = -400 - sc->syninfo.margin_right;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_ver_area", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_VER_AREA,
synaptics_sysctl, "I",
"Area reserved for vertical virtual scrolling");
/* hw.psm.synaptics.vscroll_min_delta. */
sc->syninfo.vscroll_min_delta = 50;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_min_delta", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_MIN_DELTA,
synaptics_sysctl, "I",
"Minimum movement to consider virtual scrolling");
/* hw.psm.synaptics.vscroll_div_min. */
sc->syninfo.vscroll_div_min = 100;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_div_min", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_DIV_MIN,
synaptics_sysctl, "I",
"Divisor for fast scrolling");
/* hw.psm.synaptics.vscroll_div_min. */
sc->syninfo.vscroll_div_max = 150;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"vscroll_div_max", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_VSCROLL_DIV_MAX,
synaptics_sysctl, "I",
"Divisor for slow scrolling");
/* hw.psm.synaptics.touchpad_off. */
sc->syninfo.touchpad_off = 0;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"touchpad_off", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_TOUCHPAD_OFF,
synaptics_sysctl, "I",
"Turn off touchpad");
sc->syninfo.three_finger_drag = 0;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"three_finger_drag", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_THREE_FINGER_DRAG,
synaptics_sysctl, "I",
"Enable dragging with three fingers");
/* hw.psm.synaptics.natural_scroll. */
sc->syninfo.natural_scroll = 0;
SYSCTL_ADD_PROC(&sc->syninfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->syninfo.sysctl_tree), OID_AUTO,
"natural_scroll", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, SYNAPTICS_SYSCTL_NATURAL_SCROLL,
synaptics_sysctl, "I",
"Enable natural scrolling");
sc->syninfo.softbuttons_y = 0;
sc->syninfo.softbutton2_x = 0;
sc->syninfo.softbutton3_x = 0;
/* skip softbuttons sysctl on not clickpads */
if (sc->synhw.capClickPad)
synaptics_sysctl_create_softbuttons_tree(sc);
}
static int
synaptics_preferred_mode(struct psm_softc *sc) {
int mode_byte;
/* Check if we are in relative mode */
if (sc->hw.model != MOUSE_MODEL_SYNAPTICS) {
if (tap_enabled == 0)
/*
* Disable tap & drag gestures. We use a Mode Byte
* and set the DisGest bit (see §2.5 of Synaptics
* TouchPad Interfacing Guide).
*/
return (0x04);
else
/*
* Enable tap & drag gestures. We use a Mode Byte
* and clear the DisGest bit (see §2.5 of Synaptics
* TouchPad Interfacing Guide).
*/
return (0x00);
}
mode_byte = 0xc4;
/* request wmode where available */
if (sc->synhw.capExtended)
mode_byte |= 1;
return mode_byte;
}
static void
synaptics_set_mode(struct psm_softc *sc, int mode_byte) {
mouse_ext_command(sc->kbdc, mode_byte);
/* "Commit" the Set Mode Byte command sent above. */
set_mouse_sampling_rate(sc->kbdc, 20);
/*
* Enable advanced gestures mode if supported and we are not entering
* passthrough or relative mode.
*/
if ((sc->synhw.capAdvancedGestures || sc->synhw.capReportsV) &&
sc->hw.model == MOUSE_MODEL_SYNAPTICS && !(mode_byte & (1 << 5))) {
mouse_ext_command(sc->kbdc, SYNAPTICS_READ_MODEL_ID);
set_mouse_sampling_rate(sc->kbdc, 0xc8);
}
}
/*
* AUX MUX detection code should be placed at very beginning of probe sequence
* at least before 4-byte protocol mouse probes e.g. MS IntelliMouse probe as
* latter can trigger switching the MUX to incompatible state.
*/
static int
enable_synaptics_mux(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int port, version;
int probe = FALSE;
int active_ports_count = 0;
int active_ports_mask = 0;
version = enable_aux_mux(kbdc);
if (version == -1)
return (FALSE);
for (port = 0; port < KBDC_AUX_MUX_NUM_PORTS; port++) {
VLOG(3, (LOG_DEBUG, "aux_mux: ping port %d\n", port));
set_active_aux_mux_port(kbdc, port);
if (enable_aux_dev(kbdc) && disable_aux_dev(kbdc)) {
active_ports_count++;
active_ports_mask |= 1 << port;
}
}
if (verbose >= 2)
printf("Active Multiplexing PS/2 controller v%d.%d with %d "
"active port(s)\n", version >> 4 & 0x0f, version & 0x0f,
active_ports_count);
/* psm has a special support for GenMouse + SynTouchpad combination */
if (active_ports_count >= 2) {
for (port = 0; port < KBDC_AUX_MUX_NUM_PORTS; port++) {
if ((active_ports_mask & 1 << port) == 0)
continue;
VLOG(3, (LOG_DEBUG, "aux_mux: probe port %d\n", port));
set_active_aux_mux_port(kbdc, port);
probe = enable_synaptics(sc, arg);
if (probe) {
if (arg == PROBE)
sc->muxport = port;
break;
}
}
}
/* IRQ handler does not support active multiplexing mode */
disable_aux_mux(kbdc);
return (probe);
}
static int
enable_synaptics(struct psm_softc *sc, enum probearg arg)
{
device_t psmcpnp;
struct psmcpnp_softc *psmcpnp_sc;
KBDC kbdc = sc->kbdc;
synapticshw_t synhw;
int status[3];
int buttons;
VLOG(3, (LOG_DEBUG, "synaptics: BEGIN init\n"));
/*
* Just to be on the safe side: this avoids troubles with
* following mouse_ext_command() when the previous command
* was PSMC_SET_RESOLUTION. Set Scaling has no effect on
* Synaptics Touchpad behaviour.
*/
set_mouse_scaling(kbdc, 1);
/* Identify the Touchpad version. */
if (mouse_ext_command(kbdc, SYNAPTICS_READ_IDENTITY) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (status[1] != 0x47)
return (FALSE);
bzero(&synhw, sizeof(synhw));
synhw.infoMinor = status[0];
synhw.infoMajor = status[2] & 0x0f;
if (verbose >= 2)
printf("Synaptics Touchpad v%d.%d\n", synhw.infoMajor,
synhw.infoMinor);
if (synhw.infoMajor < 4) {
printf(" Unsupported (pre-v4) Touchpad detected\n");
return (FALSE);
}
/* Get the Touchpad model information. */
if (mouse_ext_command(kbdc, SYNAPTICS_READ_MODEL_ID) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if ((status[1] & 0x01) != 0) {
printf(" Failed to read model information\n");
return (FALSE);
}
synhw.infoRot180 = (status[0] & 0x80) != 0;
synhw.infoPortrait = (status[0] & 0x40) != 0;
synhw.infoSensor = status[0] & 0x3f;
synhw.infoHardware = (status[1] & 0xfe) >> 1;
synhw.infoNewAbs = (status[2] & 0x80) != 0;
synhw.capPen = (status[2] & 0x40) != 0;
synhw.infoSimplC = (status[2] & 0x20) != 0;
synhw.infoGeometry = status[2] & 0x0f;
if (verbose >= 2) {
printf(" Model information:\n");
printf(" infoRot180: %d\n", synhw.infoRot180);
printf(" infoPortrait: %d\n", synhw.infoPortrait);
printf(" infoSensor: %d\n", synhw.infoSensor);
printf(" infoHardware: %d\n", synhw.infoHardware);
printf(" infoNewAbs: %d\n", synhw.infoNewAbs);
printf(" capPen: %d\n", synhw.capPen);
printf(" infoSimplC: %d\n", synhw.infoSimplC);
printf(" infoGeometry: %d\n", synhw.infoGeometry);
}
/* Read the extended capability bits. */
if (mouse_ext_command(kbdc, SYNAPTICS_READ_CAPABILITIES) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
printf(" Failed to read extended capability bits\n");
return (FALSE);
}
psmcpnp = devclass_get_device(devclass_find(PSMCPNP_DRIVER_NAME),
sc->unit);
psmcpnp_sc = (psmcpnp != NULL) ? device_get_softc(psmcpnp) : NULL;
/* Set the different capabilities when they exist. */
buttons = 0;
synhw.capExtended = (status[0] & 0x80) != 0;
if (synhw.capExtended) {
synhw.nExtendedQueries = (status[0] & 0x70) >> 4;
synhw.capMiddle = (status[0] & 0x04) != 0;
synhw.capPassthrough = (status[2] & 0x80) != 0;
synhw.capLowPower = (status[2] & 0x40) != 0;
synhw.capMultiFingerReport =
(status[2] & 0x20) != 0;
synhw.capSleep = (status[2] & 0x10) != 0;
synhw.capFourButtons = (status[2] & 0x08) != 0;
synhw.capBallistics = (status[2] & 0x04) != 0;
synhw.capMultiFinger = (status[2] & 0x02) != 0;
synhw.capPalmDetect = (status[2] & 0x01) != 0;
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc, SYNAPTICS_READ_RESOLUTIONS) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (status[0] != 0 && (status[1] & 0x80) && status[2] != 0) {
synhw.infoXupmm = status[0];
synhw.infoYupmm = status[2];
}
if (verbose >= 2) {
printf(" Extended capabilities:\n");
printf(" capExtended: %d\n", synhw.capExtended);
printf(" capMiddle: %d\n", synhw.capMiddle);
printf(" nExtendedQueries: %d\n",
synhw.nExtendedQueries);
printf(" capPassthrough: %d\n", synhw.capPassthrough);
printf(" capLowPower: %d\n", synhw.capLowPower);
printf(" capMultiFingerReport: %d\n",
synhw.capMultiFingerReport);
printf(" capSleep: %d\n", synhw.capSleep);
printf(" capFourButtons: %d\n", synhw.capFourButtons);
printf(" capBallistics: %d\n", synhw.capBallistics);
printf(" capMultiFinger: %d\n", synhw.capMultiFinger);
printf(" capPalmDetect: %d\n", synhw.capPalmDetect);
printf(" infoXupmm: %d\n", synhw.infoXupmm);
printf(" infoYupmm: %d\n", synhw.infoYupmm);
}
/*
* If nExtendedQueries is 1 or greater, then the TouchPad
* supports this number of extended queries. We can load
* more information about buttons using query 0x09.
*/
if (synhw.nExtendedQueries >= 1) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc,
SYNAPTICS_READ_EXTENDED) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.verticalScroll = (status[0] & 0x01) != 0;
synhw.horizontalScroll = (status[0] & 0x02) != 0;
synhw.verticalWheel = (status[0] & 0x08) != 0;
synhw.nExtendedButtons = (status[1] & 0xf0) >> 4;
synhw.capEWmode = (status[0] & 0x04) != 0;
if (verbose >= 2) {
printf(" Extended model ID:\n");
printf(" verticalScroll: %d\n",
synhw.verticalScroll);
printf(" horizontalScroll: %d\n",
synhw.horizontalScroll);
printf(" verticalWheel: %d\n",
synhw.verticalWheel);
printf(" nExtendedButtons: %d\n",
synhw.nExtendedButtons);
printf(" capEWmode: %d\n",
synhw.capEWmode);
}
/*
* Add the number of extended buttons to the total
* button support count, including the middle button
* if capMiddle support bit is set.
*/
buttons = synhw.nExtendedButtons + synhw.capMiddle;
} else
/*
* If the capFourButtons support bit is set,
* add a fourth button to the total button count.
*/
buttons = synhw.capFourButtons ? 1 : 0;
/* Read the continued capabilities bits. */
if (synhw.nExtendedQueries >= 4) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc,
SYNAPTICS_READ_CAPABILITIES_CONT) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.capClickPad = (status[1] & 0x01) << 1;
synhw.capClickPad |= (status[0] & 0x10) != 0;
synhw.capDeluxeLEDs = (status[1] & 0x02) != 0;
synhw.noAbsoluteFilter = (status[1] & 0x04) != 0;
synhw.capReportsV = (status[1] & 0x08) != 0;
synhw.capUniformClickPad = (status[1] & 0x10) != 0;
synhw.capReportsMin = (status[1] & 0x20) != 0;
synhw.capInterTouch = (status[1] & 0x40) != 0;
synhw.capReportsMax = (status[0] & 0x02) != 0;
synhw.capClearPad = (status[0] & 0x04) != 0;
synhw.capAdvancedGestures = (status[0] & 0x08) != 0;
synhw.capCoveredPad = (status[0] & 0x80) != 0;
if (synhw.capReportsMax) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc,
SYNAPTICS_READ_MAX_COORDS) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.maximumXCoord = (status[0] << 5) |
((status[1] & 0x0f) << 1);
synhw.maximumYCoord = (status[2] << 5) |
((status[1] & 0xf0) >> 3);
} else {
/*
* Typical bezel limits. Taken from 'Synaptics
* PS/2 * TouchPad Interfacing Guide' p.3.2.3.
*/
synhw.maximumXCoord = 5472;
synhw.maximumYCoord = 4448;
}
if (synhw.capReportsMin) {
if (!set_mouse_scaling(kbdc, 1))
return (FALSE);
if (mouse_ext_command(kbdc,
SYNAPTICS_READ_MIN_COORDS) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
synhw.minimumXCoord = (status[0] << 5) |
((status[1] & 0x0f) << 1);
synhw.minimumYCoord = (status[2] << 5) |
((status[1] & 0xf0) >> 3);
} else {
/*
* Typical bezel limits. Taken from 'Synaptics
* PS/2 * TouchPad Interfacing Guide' p.3.2.3.
*/
synhw.minimumXCoord = 1472;
synhw.minimumYCoord = 1408;
}
/*
* ClickPad properties are not exported through PS/2
* protocol. Detection is based on controller's PnP ID.
*/
if (synhw.capClickPad && psmcpnp_sc != NULL) {
switch (psmcpnp_sc->type) {
case PSMCPNP_FORCEPAD:
synhw.forcePad = 1;
break;
case PSMCPNP_TOPBUTTONPAD:
synhw.topButtonPad = 1;
break;
default:
break;
}
}
if (verbose >= 2) {
printf(" Continued capabilities:\n");
printf(" capClickPad: %d\n",
synhw.capClickPad);
printf(" capDeluxeLEDs: %d\n",
synhw.capDeluxeLEDs);
printf(" noAbsoluteFilter: %d\n",
synhw.noAbsoluteFilter);
printf(" capReportsV: %d\n",
synhw.capReportsV);
printf(" capUniformClickPad: %d\n",
synhw.capUniformClickPad);
printf(" capReportsMin: %d\n",
synhw.capReportsMin);
printf(" capInterTouch: %d\n",
synhw.capInterTouch);
printf(" capReportsMax: %d\n",
synhw.capReportsMax);
printf(" capClearPad: %d\n",
synhw.capClearPad);
printf(" capAdvancedGestures: %d\n",
synhw.capAdvancedGestures);
printf(" capCoveredPad: %d\n",
synhw.capCoveredPad);
if (synhw.capReportsMax) {
printf(" maximumXCoord: %d\n",
synhw.maximumXCoord);
printf(" maximumYCoord: %d\n",
synhw.maximumYCoord);
}
if (synhw.capReportsMin) {
printf(" minimumXCoord: %d\n",
synhw.minimumXCoord);
printf(" minimumYCoord: %d\n",
synhw.minimumYCoord);
}
if (synhw.capClickPad) {
printf(" Clickpad capabilities:\n");
printf(" forcePad: %d\n",
synhw.forcePad);
printf(" topButtonPad: %d\n",
synhw.topButtonPad);
}
}
buttons += synhw.capClickPad;
}
}
if (verbose >= 2) {
if (synhw.capExtended)
printf(" Additional Buttons: %d\n", buttons);
else
printf(" No extended capabilities\n");
}
/*
* Add the default number of 3 buttons to the total
* count of supported buttons reported above.
*/
buttons += 3;
/*
* Read the mode byte.
*
* XXX: Note the Synaptics documentation also defines the first
* byte of the response to this query to be a constant 0x3b, this
* does not appear to be true for Touchpads with guest devices.
*/
if (mouse_ext_command(kbdc, SYNAPTICS_READ_MODES) == 0)
return (FALSE);
if (get_mouse_status(kbdc, status, 0, 3) != 3)
return (FALSE);
if (!SYNAPTICS_VERSION_GE(synhw, 7, 5) && status[1] != 0x47) {
printf(" Failed to read mode byte\n");
return (FALSE);
}
if (arg == PROBE)
sc->synhw = synhw;
if (!synaptics_support)
return (FALSE);
/* Set mouse type just now for synaptics_set_mode() */
sc->hw.model = MOUSE_MODEL_SYNAPTICS;
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
if (trackpoint_support && synhw.capPassthrough) {
enable_trackpoint(sc, arg);
}
VLOG(3, (LOG_DEBUG, "synaptics: END init (%d buttons)\n", buttons));
if (arg == PROBE) {
/* Create sysctl tree. */
synaptics_sysctl_create_tree(sc, "synaptics",
"Synaptics TouchPad");
sc->hw.buttons = buttons;
}
return (TRUE);
}
static void
synaptics_passthrough_on(struct psm_softc *sc)
{
VLOG(2, (LOG_NOTICE, "psm: setting pass-through mode.\n"));
synaptics_set_mode(sc, synaptics_preferred_mode(sc) | (1 << 5));
}
static void
synaptics_passthrough_off(struct psm_softc *sc)
{
VLOG(2, (LOG_NOTICE, "psm: turning pass-through mode off.\n"));
set_mouse_scaling(sc->kbdc, 2);
set_mouse_scaling(sc->kbdc, 1);
synaptics_set_mode(sc, synaptics_preferred_mode(sc));
}
/* IBM/Lenovo TrackPoint */
static int
trackpoint_command(struct psm_softc *sc, int cmd, int loc, int val)
{
const int seq[] = { 0xe2, cmd, loc, val };
int i;
if (sc->synhw.capPassthrough)
synaptics_passthrough_on(sc);
for (i = 0; i < nitems(seq); i++) {
if (sc->synhw.capPassthrough &&
(seq[i] == 0xff || seq[i] == 0xe7))
if (send_aux_command(sc->kbdc, 0xe7) != PSM_ACK) {
synaptics_passthrough_off(sc);
return (EIO);
}
if (send_aux_command(sc->kbdc, seq[i]) != PSM_ACK) {
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
return (EIO);
}
}
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
return (0);
}
#define PSM_TPINFO(x) offsetof(struct psm_softc, tpinfo.x)
#define TPMASK 0
#define TPLOC 1
#define TPINFO 2
static int
trackpoint_sysctl(SYSCTL_HANDLER_ARGS)
{
static const int data[][3] = {
{ 0x00, 0x4a, PSM_TPINFO(sensitivity) },
{ 0x00, 0x4d, PSM_TPINFO(inertia) },
{ 0x00, 0x60, PSM_TPINFO(uplateau) },
{ 0x00, 0x57, PSM_TPINFO(reach) },
{ 0x00, 0x58, PSM_TPINFO(draghys) },
{ 0x00, 0x59, PSM_TPINFO(mindrag) },
{ 0x00, 0x5a, PSM_TPINFO(upthresh) },
{ 0x00, 0x5c, PSM_TPINFO(threshold) },
{ 0x00, 0x5d, PSM_TPINFO(jenks) },
{ 0x00, 0x5e, PSM_TPINFO(ztime) },
{ 0x01, 0x2c, PSM_TPINFO(pts) },
{ 0x08, 0x2d, PSM_TPINFO(skipback) }
};
struct psm_softc *sc;
int error, newval, *oldvalp;
const int *tp;
if (arg1 == NULL || arg2 < 0 || arg2 >= nitems(data))
return (EINVAL);
sc = arg1;
tp = data[arg2];
oldvalp = (int *)((intptr_t)sc + tp[TPINFO]);
newval = *oldvalp;
error = sysctl_handle_int(oidp, &newval, 0, req);
if (error != 0)
return (error);
if (newval == *oldvalp)
return (0);
if (newval < 0 || newval > (tp[TPMASK] == 0 ? 255 : 1))
return (EINVAL);
error = trackpoint_command(sc, tp[TPMASK] == 0 ? 0x81 : 0x47,
tp[TPLOC], tp[TPMASK] == 0 ? newval : tp[TPMASK]);
if (error != 0)
return (error);
*oldvalp = newval;
return (0);
}
static void
trackpoint_sysctl_create_tree(struct psm_softc *sc)
{
if (sc->tpinfo.sysctl_tree != NULL)
return;
/* Attach extra trackpoint sysctl nodes under hw.psm.trackpoint */
sysctl_ctx_init(&sc->tpinfo.sysctl_ctx);
sc->tpinfo.sysctl_tree = SYSCTL_ADD_NODE(&sc->tpinfo.sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_psm), OID_AUTO, "trackpoint", CTLFLAG_RD,
0, "IBM/Lenovo TrackPoint");
/* hw.psm.trackpoint.sensitivity */
sc->tpinfo.sensitivity = 0x80;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"sensitivity", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_SENSITIVITY,
trackpoint_sysctl, "I",
"Sensitivity");
/* hw.psm.trackpoint.negative_inertia */
sc->tpinfo.inertia = 0x06;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"negative_inertia", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_NEGATIVE_INERTIA,
trackpoint_sysctl, "I",
"Negative inertia factor");
/* hw.psm.trackpoint.upper_plateau */
sc->tpinfo.uplateau = 0x61;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"upper_plateau", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_UPPER_PLATEAU,
trackpoint_sysctl, "I",
"Transfer function upper plateau speed");
/* hw.psm.trackpoint.backup_range */
sc->tpinfo.reach = 0x0a;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"backup_range", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_BACKUP_RANGE,
trackpoint_sysctl, "I",
"Backup range");
/* hw.psm.trackpoint.drag_hysteresis */
sc->tpinfo.draghys = 0xff;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"drag_hysteresis", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_DRAG_HYSTERESIS,
trackpoint_sysctl, "I",
"Drag hysteresis");
/* hw.psm.trackpoint.minimum_drag */
sc->tpinfo.mindrag = 0x14;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"minimum_drag", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_MINIMUM_DRAG,
trackpoint_sysctl, "I",
"Minimum drag");
/* hw.psm.trackpoint.up_threshold */
sc->tpinfo.upthresh = 0xff;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"up_threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_UP_THRESHOLD,
trackpoint_sysctl, "I",
"Up threshold for release");
/* hw.psm.trackpoint.threshold */
sc->tpinfo.threshold = 0x08;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"threshold", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_THRESHOLD,
trackpoint_sysctl, "I",
"Threshold");
/* hw.psm.trackpoint.jenks_curvature */
sc->tpinfo.jenks = 0x87;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"jenks_curvature", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_JENKS_CURVATURE,
trackpoint_sysctl, "I",
"Jenks curvature");
/* hw.psm.trackpoint.z_time */
sc->tpinfo.ztime = 0x26;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"z_time", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_Z_TIME,
trackpoint_sysctl, "I",
"Z time constant");
/* hw.psm.trackpoint.press_to_select */
sc->tpinfo.pts = 0x00;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"press_to_select", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_PRESS_TO_SELECT,
trackpoint_sysctl, "I",
"Press to Select");
/* hw.psm.trackpoint.skip_backups */
sc->tpinfo.skipback = 0x00;
SYSCTL_ADD_PROC(&sc->tpinfo.sysctl_ctx,
SYSCTL_CHILDREN(sc->tpinfo.sysctl_tree), OID_AUTO,
"skip_backups", CTLTYPE_INT|CTLFLAG_RW|CTLFLAG_ANYBODY,
sc, TRACKPOINT_SYSCTL_SKIP_BACKUPS,
trackpoint_sysctl, "I",
"Skip backups from drags");
}
static void
set_trackpoint_parameters(struct psm_softc *sc)
{
trackpoint_command(sc, 0x81, 0x4a, sc->tpinfo.sensitivity);
trackpoint_command(sc, 0x81, 0x60, sc->tpinfo.uplateau);
trackpoint_command(sc, 0x81, 0x4d, sc->tpinfo.inertia);
trackpoint_command(sc, 0x81, 0x57, sc->tpinfo.reach);
trackpoint_command(sc, 0x81, 0x58, sc->tpinfo.draghys);
trackpoint_command(sc, 0x81, 0x59, sc->tpinfo.mindrag);
trackpoint_command(sc, 0x81, 0x5a, sc->tpinfo.upthresh);
trackpoint_command(sc, 0x81, 0x5c, sc->tpinfo.threshold);
trackpoint_command(sc, 0x81, 0x5d, sc->tpinfo.jenks);
trackpoint_command(sc, 0x81, 0x5e, sc->tpinfo.ztime);
if (sc->tpinfo.pts == 0x01)
trackpoint_command(sc, 0x47, 0x2c, 0x01);
if (sc->tpinfo.skipback == 0x01)
trackpoint_command(sc, 0x47, 0x2d, 0x08);
}
static int
enable_trackpoint(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int id;
/*
* If called from enable_synaptics(), make sure that passthrough
* mode is enabled so we can reach the trackpoint.
* However, passthrough mode must be disabled before setting the
* trackpoint parameters, as rackpoint_command() enables and disables
* passthrough mode on its own.
*/
if (sc->synhw.capPassthrough)
synaptics_passthrough_on(sc);
if (send_aux_command(kbdc, 0xe1) != PSM_ACK ||
read_aux_data(kbdc) != 0x01)
goto no_trackpoint;
id = read_aux_data(kbdc);
if (id < 0x01)
goto no_trackpoint;
if (arg == PROBE)
sc->tphw = id;
if (!trackpoint_support)
goto no_trackpoint;
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
if (arg == PROBE) {
trackpoint_sysctl_create_tree(sc);
/*
* Don't overwrite hwid and buttons when we are
* a guest device.
*/
if (!sc->synhw.capPassthrough) {
sc->hw.hwid = id;
sc->hw.buttons = 3;
}
}
set_trackpoint_parameters(sc);
return (TRUE);
no_trackpoint:
if (sc->synhw.capPassthrough)
synaptics_passthrough_off(sc);
return (FALSE);
}
/* Interlink electronics VersaPad */
static int
enable_versapad(struct psm_softc *sc, enum probearg arg)
{
KBDC kbdc = sc->kbdc;
int data[3];
set_mouse_resolution(kbdc, PSMD_RES_MEDIUM_HIGH); /* set res. 2 */
set_mouse_sampling_rate(kbdc, 100); /* set rate 100 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
if (get_mouse_status(kbdc, data, 0, 3) < 3) /* get status */
return (FALSE);
if (data[2] != 0xa || data[1] != 0 ) /* rate == 0xa && res. == 0 */
return (FALSE);
set_mouse_scaling(kbdc, 1); /* set scale 1:1 */
return (TRUE); /* PS/2 absolute mode */
}
/* Elantech Touchpad */
static int
elantech_read_1(KBDC kbdc, int hwversion, int reg, int *val)
{
int res, readcmd, retidx;
int resp[3];
readcmd = hwversion == 2 ? ELANTECH_REG_READ : ELANTECH_REG_RDWR;
retidx = hwversion == 4 ? 1 : 0;
res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, readcmd) != PSM_ACK;
res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, reg) != PSM_ACK;
res |= get_mouse_status(kbdc, resp, 0, 3) != 3;
if (res == 0)
*val = resp[retidx];
return (res);
}
static int
elantech_write_1(KBDC kbdc, int hwversion, int reg, int val)
{
int res, writecmd;
writecmd = hwversion == 2 ? ELANTECH_REG_WRITE : ELANTECH_REG_RDWR;
res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, writecmd) != PSM_ACK;
res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, reg) != PSM_ACK;
if (hwversion == 4) {
res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, writecmd) != PSM_ACK;
}
res |= send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, val) != PSM_ACK;
res |= set_mouse_scaling(kbdc, 1) == 0;
return (res);
}
static int
elantech_cmd(KBDC kbdc, int hwversion, int cmd, int *resp)
{
int res;
if (hwversion == 2) {
res = set_mouse_scaling(kbdc, 1) == 0;
res |= mouse_ext_command(kbdc, cmd) == 0;
} else {
res = send_aux_command(kbdc, ELANTECH_CUSTOM_CMD) != PSM_ACK;
res |= send_aux_command(kbdc, cmd) != PSM_ACK;
}
res |= get_mouse_status(kbdc, resp, 0, 3) != 3;
return (res);
}
static int
elantech_init(KBDC kbdc, elantechhw_t *elanhw)
{
int i, val, res, hwversion, reg10;
/* set absolute mode */
hwversion = elanhw->hwversion;
reg10 = -1;
switch (hwversion) {
case 2:
reg10 = elanhw->fwversion == 0x020030 ? 0x54 : 0xc4;
res = elantech_write_1(kbdc, hwversion, 0x10, reg10);
if (res)
break;
res = elantech_write_1(kbdc, hwversion, 0x11, 0x8A);
break;
case 3:
reg10 = 0x0b;
res = elantech_write_1(kbdc, hwversion, 0x10, reg10);
break;
case 4:
res = elantech_write_1(kbdc, hwversion, 0x07, 0x01);
break;
default:
res = 1;
}
/* Read back reg 0x10 to ensure hardware is ready. */
if (res == 0 && reg10 >= 0) {
for (i = 0; i < 5; i++) {
if (elantech_read_1(kbdc, hwversion, 0x10, &val) == 0)
break;
DELAY(2000);
}
if (i == 5)
res = 1;
}
if (res)
printf("couldn't set absolute mode\n");
return (res);
}
static void
elantech_init_synaptics(struct psm_softc *sc)
{
/* Set capabilites required by movement smother */
sc->synhw.infoMajor = sc->elanhw.hwversion;
sc->synhw.infoMinor = sc->elanhw.fwversion;
sc->synhw.infoXupmm = sc->elanhw.dpmmx;
sc->synhw.infoYupmm = sc->elanhw.dpmmy;
sc->synhw.verticalScroll = 0;
sc->synhw.nExtendedQueries = 4;
sc->synhw.capExtended = 1;
sc->synhw.capPassthrough = sc->elanhw.hastrackpoint;
sc->synhw.capClickPad = sc->elanhw.isclickpad;
sc->synhw.capMultiFinger = 1;
if (sc->elanhw.issemimt)
sc->synhw.capAdvancedGestures = 1;
else
sc->synhw.capReportsV = 1;
sc->synhw.capPalmDetect = 1;
sc->synhw.capPen = 0;
sc->synhw.capReportsMax = 1;
sc->synhw.maximumXCoord = sc->elanhw.sizex;
sc->synhw.maximumYCoord = sc->elanhw.sizey;
sc->synhw.capReportsMin = 1;
sc->synhw.minimumXCoord = 0;
sc->synhw.minimumYCoord = 0;
if (sc->syninfo.sysctl_tree == NULL) {
synaptics_sysctl_create_tree(sc, "elantech",
"Elantech Touchpad");
/*
* Adjust synaptic smoother tunables
* 1. Disable finger detection pressure threshold. Unlike
* synaptics we assume the finger is acting when packet with
* its X&Y arrives not when pressure exceedes some threshold
* 2. Disable unrelated features like margins and noisy areas
* 3. Disable virtual scroll areas as 2nd finger is preferable
* 4. For clickpads set bottom quarter as 42% - 16% - 42% sized
* softbuttons
* 5. Scale down divisors and movement lengths by a factor of 3
* where 3 is Synaptics to Elantech (~2200/800) dpi ratio
*/
/* Set reporting range to be equal touchpad size */
sc->syninfo.max_x = sc->elanhw.sizex;
sc->syninfo.max_y = sc->elanhw.sizey;
/* Disable finger detection pressure threshold */
sc->syninfo.min_pressure = 1;
/* Adjust palm width to nearly match synaptics w=10 */
sc->syninfo.max_width = 7;
/* Elans often report double & triple taps as single event */
sc->syninfo.tap_min_queue = 1;
/* Use full area of touchpad */
sc->syninfo.margin_top = 0;
sc->syninfo.margin_right = 0;
sc->syninfo.margin_bottom = 0;
sc->syninfo.margin_left = 0;
/* Disable noisy area */
sc->syninfo.na_top = 0;
sc->syninfo.na_right = 0;
sc->syninfo.na_bottom = 0;
sc->syninfo.na_left = 0;
/* Tune divisors and movement lengths */
sc->syninfo.weight_len_squared = 200;
sc->syninfo.div_min = 3;
sc->syninfo.div_max = 6;
sc->syninfo.div_max_na = 10;
sc->syninfo.div_len = 30;
sc->syninfo.tap_max_delta = 25;
/* Disable virtual scrolling areas and tune its divisors */
sc->syninfo.vscroll_hor_area = 0;
sc->syninfo.vscroll_ver_area = 0;
sc->syninfo.vscroll_min_delta = 15;
sc->syninfo.vscroll_div_min = 30;
sc->syninfo.vscroll_div_max = 50;
/* Set bottom quarter as 42% - 16% - 42% sized softbuttons */
if (sc->elanhw.isclickpad) {
sc->syninfo.softbuttons_y = sc->elanhw.sizey / 4;
sc->syninfo.softbutton2_x = sc->elanhw.sizex * 11 / 25;
sc->syninfo.softbutton3_x = sc->elanhw.sizex * 14 / 25;
}
}
return;
}
static int
enable_elantech(struct psm_softc *sc, enum probearg arg)
{
static const int ic2hw[] =
/*IC: 0 1 2 3 4 5 6 7 8 9 a b c d e f */
{ 0, 0, 2, 0, 2, 3, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 };
static const int fw_sizes[][3] = {
/* FW.vers MaxX MaxY */
{ 0x020030, 1152, 768 },
{ 0x020800, 1152, 768 },
{ 0x020b00, 1152, 768 },
{ 0x040215, 900, 500 },
{ 0x040216, 819, 405 },
{ 0x040219, 900, 500 },
};
elantechhw_t elanhw;
int icversion, hwversion, xtr, i, id, resp[3], dpix, dpiy;
KBDC kbdc = sc->kbdc;
VLOG(3, (LOG_DEBUG, "elantech: BEGIN init\n"));
set_mouse_scaling(kbdc, 1);
set_mouse_scaling(kbdc, 1);
set_mouse_scaling(kbdc, 1);
if (get_mouse_status(kbdc, resp, 0, 3) != 3)
return (FALSE);
if (!ELANTECH_MAGIC(resp))
return (FALSE);
/* Identify the Touchpad version. */
if (elantech_cmd(kbdc, 2, ELANTECH_FW_VERSION, resp))
return (FALSE);
bzero(&elanhw, sizeof(elanhw));
elanhw.fwversion = (resp[0] << 16) | (resp[1] << 8) | resp[2];
icversion = resp[0] & 0x0f;
hwversion = ic2hw[icversion];
if (verbose >= 2)
printf("Elantech touchpad hardware v.%d firmware v.0x%06x\n",
hwversion, elanhw.fwversion);
if (ELANTECH_HW_IS_V1(elanhw.fwversion)) {
printf (" Unsupported touchpad hardware (v1)\n");
return (FALSE);
}
if (hwversion == 0) {
printf (" Unknown touchpad hardware (firmware v.0x%06x)\n",
elanhw.fwversion);
return (FALSE);
}
/* Get the Touchpad model information. */
elanhw.hwversion = hwversion;
elanhw.issemimt = hwversion == 2;
elanhw.isclickpad = (resp[1] & 0x10) != 0;
elanhw.hascrc = (resp[1] & 0x40) != 0;
elanhw.haspressure = elanhw.fwversion >= 0x020800;
/* Read the capability bits. */
if (elantech_cmd(kbdc, hwversion, ELANTECH_CAPABILITIES, resp) != 0) {
printf(" Failed to read capability bits\n");
return (FALSE);
}
elanhw.ntracesx = imax(resp[1], 3);
elanhw.ntracesy = imax(resp[2], 3);
elanhw.hastrackpoint = (resp[0] & 0x80) != 0;
/* Get the touchpad resolution */
switch (hwversion) {
case 4:
if (elantech_cmd(kbdc, hwversion, ELANTECH_RESOLUTION, resp)
== 0) {
dpix = (resp[1] & 0x0f) * 10 + 790;
dpiy = ((resp[1] & 0xf0) >> 4) * 10 + 790;
elanhw.dpmmx = (dpix * 10 + 5) / 254;
elanhw.dpmmy = (dpiy * 10 + 5) / 254;
break;
}
/* FALLTHROUGH */
case 2:
case 3:
elanhw.dpmmx = elanhw.dpmmy = 32; /* 800 dpi */
break;
}
if (!elantech_support)
return (FALSE);
if (elantech_init(kbdc, &elanhw)) {
printf("couldn't initialize elantech touchpad\n");
return (FALSE);
}
/*
* Get the touchpad reporting range.
* On HW v.3 touchpads it should be done after switching hardware
* to real resolution mode (by setting bit 3 of reg10)
*/
elanhw.dptracex = elanhw.dptracey = 64;
for (i = 0; i < nitems(fw_sizes); i++) {
if (elanhw.fwversion == fw_sizes[i][0]) {
elanhw.sizex = fw_sizes[i][1];
elanhw.sizey = fw_sizes[i][2];
goto found;
}
}
if (elantech_cmd(kbdc, hwversion, ELANTECH_FW_ID, resp) != 0) {
printf(" Failed to read touchpad size\n");
elanhw.sizex = 10000; /* Arbitrary high values to */
elanhw.sizey = 10000; /* prevent clipping in smoother */
} else if (hwversion == 2) {
if ((elanhw.fwversion >> 16) == 0x14 && (resp[1] & 0x10) &&
!elantech_cmd(kbdc, hwversion, ELANTECH_SAMPLE, resp)) {
elanhw.dptracex = resp[1] / 2;
elanhw.dptracey = resp[2] / 2;
}
xtr = ((elanhw.fwversion >> 8) == 0x0208) ? 1 : 2;
elanhw.sizex = (elanhw.ntracesx - xtr) * elanhw.dptracex;
elanhw.sizey = (elanhw.ntracesy - xtr) * elanhw.dptracey;
} else {
elanhw.sizex = (resp[0] & 0x0f) << 8 | resp[1];
elanhw.sizey = (resp[0] & 0xf0) << 4 | resp[2];
xtr = (elanhw.sizex % (elanhw.ntracesx - 2) == 0) ? 2 : 1;
elanhw.dptracex = elanhw.sizex / (elanhw.ntracesx - xtr);
elanhw.dptracey = elanhw.sizey / (elanhw.ntracesy - xtr);
}
found:
if (verbose >= 2) {
printf(" Model information:\n");
printf(" MaxX: %d\n", elanhw.sizex);
printf(" MaxY: %d\n", elanhw.sizey);
printf(" DpmmX: %d\n", elanhw.dpmmx);
printf(" DpmmY: %d\n", elanhw.dpmmy);
printf(" TracesX: %d\n", elanhw.ntracesx);
printf(" TracesY: %d\n", elanhw.ntracesy);
printf(" DptraceX: %d\n", elanhw.dptracex);
printf(" DptraceY: %d\n", elanhw.dptracey);
printf(" SemiMT: %d\n", elanhw.issemimt);
printf(" Clickpad: %d\n", elanhw.isclickpad);
printf(" Trackpoint: %d\n", elanhw.hastrackpoint);
printf(" CRC: %d\n", elanhw.hascrc);
printf(" Pressure: %d\n", elanhw.haspressure);
}
VLOG(3, (LOG_DEBUG, "elantech: END init\n"));
if (arg == PROBE) {
sc->elanhw = elanhw;
sc->hw.buttons = 3;
/* Initialize synaptics movement smoother */
elantech_init_synaptics(sc);
for (id = 0; id < ELANTECH_MAX_FINGERS; id++)
PSM_FINGER_RESET(sc->elanaction.fingers[id]);
}
return (TRUE);
}
/*
* Return true if 'now' is earlier than (start + (secs.usecs)).
* Now may be NULL and the function will fetch the current time from
* getmicrouptime(), or a cached 'now' can be passed in.
* All values should be numbers derived from getmicrouptime().
*/
static int
timeelapsed(start, secs, usecs, now)
const struct timeval *start, *now;
int secs, usecs;
{
struct timeval snow, tv;
/* if there is no 'now' passed in, the get it as a convience. */
if (now == NULL) {
getmicrouptime(&snow);
now = &snow;
}
tv.tv_sec = secs;
tv.tv_usec = usecs;
timevaladd(&tv, start);
return (timevalcmp(&tv, now, <));
}
static int
psmresume(device_t dev)
{
struct psm_softc *sc = device_get_softc(dev);
int unit = device_get_unit(dev);
int err;
VLOG(2, (LOG_NOTICE, "psm%d: system resume hook called.\n", unit));
if ((sc->config &
(PSM_CONFIG_HOOKRESUME | PSM_CONFIG_INITAFTERSUSPEND)) == 0)
return (0);
err = reinitialize(sc, sc->config & PSM_CONFIG_INITAFTERSUSPEND);
if ((sc->state & PSM_ASLP) && !(sc->state & PSM_VALID)) {
/*
* Release the blocked process; it must be notified that
* the device cannot be accessed anymore.
*/
sc->state &= ~PSM_ASLP;
wakeup(sc);
}
VLOG(2, (LOG_DEBUG, "psm%d: system resume hook exiting.\n", unit));
return (err);
}
DRIVER_MODULE(psm, atkbdc, psm_driver, psm_devclass, 0, 0);
#ifdef EVDEV_SUPPORT
MODULE_DEPEND(psm, evdev, 1, 1, 1);
#endif
#ifdef DEV_ISA
/*
* This sucks up assignments from PNPBIOS and ACPI.
*/
/*
* When the PS/2 mouse device is reported by ACPI or PnP BIOS, it may
* appear BEFORE the AT keyboard controller. As the PS/2 mouse device
* can be probed and attached only after the AT keyboard controller is
* attached, we shall quietly reserve the IRQ resource for later use.
* If the PS/2 mouse device is reported to us AFTER the keyboard controller,
* copy the IRQ resource to the PS/2 mouse device instance hanging
* under the keyboard controller, then probe and attach it.
*/
static devclass_t psmcpnp_devclass;
static device_probe_t psmcpnp_probe;
static device_attach_t psmcpnp_attach;
static device_method_t psmcpnp_methods[] = {
DEVMETHOD(device_probe, psmcpnp_probe),
DEVMETHOD(device_attach, psmcpnp_attach),
{ 0, 0 }
};
static driver_t psmcpnp_driver = {
PSMCPNP_DRIVER_NAME,
psmcpnp_methods,
sizeof(struct psmcpnp_softc),
};
static struct isa_pnp_id psmcpnp_ids[] = {
{ 0x030fd041, "PS/2 mouse port" }, /* PNP0F03 */
{ 0x0e0fd041, "PS/2 mouse port" }, /* PNP0F0E */
{ 0x120fd041, "PS/2 mouse port" }, /* PNP0F12 */
{ 0x130fd041, "PS/2 mouse port" }, /* PNP0F13 */
{ 0x1303d041, "PS/2 port" }, /* PNP0313, XXX */
{ 0x02002e4f, "Dell PS/2 mouse port" }, /* Lat. X200, Dell */
{ 0x0002a906, "ALPS Glide Point" }, /* ALPS Glide Point */
{ 0x80374d24, "IBM PS/2 mouse port" }, /* IBM3780, ThinkPad */
{ 0x81374d24, "IBM PS/2 mouse port" }, /* IBM3781, ThinkPad */
{ 0x0190d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9001, Vaio */
{ 0x0290d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9002, Vaio */
{ 0x0390d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9003, Vaio */
{ 0x0490d94d, "SONY VAIO PS/2 mouse port"}, /* SNY9004, Vaio */
{ 0 }
};
/* _HID list for quirk detection. Any device below has _CID from psmcpnp_ids */
static struct isa_pnp_id topbtpad_ids[] = {
{ 0x1700ae30, "Lenovo PS/2 clickpad port" }, /* LEN0017, ThinkPad */
{ 0x1800ae30, "Lenovo PS/2 clickpad port" }, /* LEN0018, ThinkPad */
{ 0x1900ae30, "Lenovo PS/2 clickpad port" }, /* LEN0019, ThinkPad */
{ 0x2300ae30, "Lenovo PS/2 clickpad port" }, /* LEN0023, ThinkPad */
{ 0x2a00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002a, ThinkPad */
{ 0x2b00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002b, ThinkPad */
{ 0x2c00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002c, ThinkPad */
{ 0x2d00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002d, ThinkPad */
{ 0x2e00ae30, "Lenovo PS/2 clickpad port" }, /* LEN002e, ThinkPad */
{ 0x3300ae30, "Lenovo PS/2 clickpad port" }, /* LEN0033, ThinkPad */
{ 0x3400ae30, "Lenovo PS/2 clickpad port" }, /* LEN0034, ThinkPad */
{ 0x3500ae30, "Lenovo PS/2 clickpad port" }, /* LEN0035, ThinkPad */
{ 0x3600ae30, "Lenovo PS/2 clickpad port" }, /* LEN0036, ThinkPad */
{ 0x3700ae30, "Lenovo PS/2 clickpad port" }, /* LEN0037, ThinkPad */
{ 0x3800ae30, "Lenovo PS/2 clickpad port" }, /* LEN0038, ThinkPad */
{ 0x3900ae30, "Lenovo PS/2 clickpad port" }, /* LEN0039, ThinkPad */
{ 0x4100ae30, "Lenovo PS/2 clickpad port" }, /* LEN0041, ThinkPad */
{ 0x4200ae30, "Lenovo PS/2 clickpad port" }, /* LEN0042, ThinkPad */
{ 0x4500ae30, "Lenovo PS/2 clickpad port" }, /* LEN0045, ThinkPad */
{ 0x4700ae30, "Lenovo PS/2 clickpad port" }, /* LEN0047, ThinkPad */
{ 0x4900ae30, "Lenovo PS/2 clickpad port" }, /* LEN0049, ThinkPad */
{ 0x0020ae30, "Lenovo PS/2 clickpad port" }, /* LEN2000, ThinkPad */
{ 0x0120ae30, "Lenovo PS/2 clickpad port" }, /* LEN2001, ThinkPad */
{ 0x0220ae30, "Lenovo PS/2 clickpad port" }, /* LEN2002, ThinkPad */
{ 0x0320ae30, "Lenovo PS/2 clickpad port" }, /* LEN2003, ThinkPad */
{ 0x0420ae30, "Lenovo PS/2 clickpad port" }, /* LEN2004, ThinkPad */
{ 0x0520ae30, "Lenovo PS/2 clickpad port" }, /* LEN2005, ThinkPad */
{ 0x0620ae30, "Lenovo PS/2 clickpad port" }, /* LEN2006, ThinkPad */
{ 0x0720ae30, "Lenovo PS/2 clickpad port" }, /* LEN2007, ThinkPad */
{ 0x0820ae30, "Lenovo PS/2 clickpad port" }, /* LEN2008, ThinkPad */
{ 0x0920ae30, "Lenovo PS/2 clickpad port" }, /* LEN2009, ThinkPad */
{ 0x0a20ae30, "Lenovo PS/2 clickpad port" }, /* LEN200a, ThinkPad */
{ 0x0b20ae30, "Lenovo PS/2 clickpad port" }, /* LEN200b, ThinkPad */
{ 0 }
};
/* _HID list for quirk detection. Any device below has _CID from psmcpnp_ids */
static struct isa_pnp_id forcepad_ids[] = {
{ 0x0d302e4f, "HP PS/2 forcepad port" }, /* SYN300D, EB 1040 */
{ 0x14302e4f, "HP PS/2 forcepad port" }, /* SYN3014, EB 1040 */
{ 0 }
};
static int
create_a_copy(device_t atkbdc, device_t me)
{
device_t psm;
u_long irq;
/* find the PS/2 mouse device instance under the keyboard controller */
psm = device_find_child(atkbdc, PSM_DRIVER_NAME,
device_get_unit(atkbdc));
if (psm == NULL)
return (ENXIO);
if (device_get_state(psm) != DS_NOTPRESENT)
return (0);
/* move our resource to the found device */
irq = bus_get_resource_start(me, SYS_RES_IRQ, 0);
bus_delete_resource(me, SYS_RES_IRQ, 0);
bus_set_resource(psm, SYS_RES_IRQ, KBDC_RID_AUX, irq, 1);
/* ...then probe and attach it */
return (device_probe_and_attach(psm));
}
static int
psmcpnp_probe(device_t dev)
{
struct psmcpnp_softc *sc = device_get_softc(dev);
struct resource *res;
u_long irq;
int rid;
if (ISA_PNP_PROBE(device_get_parent(dev), dev, forcepad_ids) == 0)
sc->type = PSMCPNP_FORCEPAD;
else if (ISA_PNP_PROBE(device_get_parent(dev), dev, topbtpad_ids) == 0)
sc->type = PSMCPNP_TOPBUTTONPAD;
else if (ISA_PNP_PROBE(device_get_parent(dev), dev, psmcpnp_ids) == 0)
sc->type = PSMCPNP_GENERIC;
else
return (ENXIO);
/*
* The PnP BIOS and ACPI are supposed to assign an IRQ (12)
* to the PS/2 mouse device node. But, some buggy PnP BIOS
* declares the PS/2 mouse device node without an IRQ resource!
* If this happens, we shall refer to device hints.
* If we still don't find it there, use a hardcoded value... XXX
*/
rid = 0;
irq = bus_get_resource_start(dev, SYS_RES_IRQ, rid);
if (irq <= 0) {
if (resource_long_value(PSM_DRIVER_NAME,
device_get_unit(dev),"irq", &irq) != 0)
irq = 12; /* XXX */
device_printf(dev, "irq resource info is missing; "
"assuming irq %ld\n", irq);
bus_set_resource(dev, SYS_RES_IRQ, rid, irq, 1);
}
res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 0);
bus_release_resource(dev, SYS_RES_IRQ, rid, res);
/* keep quiet */
if (!bootverbose)
device_quiet(dev);
return ((res == NULL) ? ENXIO : 0);
}
static int
psmcpnp_attach(device_t dev)
{
device_t atkbdc;
/* find the keyboard controller, which may be on acpi* or isa* bus */
atkbdc = devclass_get_device(devclass_find(ATKBDC_DRIVER_NAME),
device_get_unit(dev));
if ((atkbdc != NULL) && (device_get_state(atkbdc) == DS_ATTACHED))
create_a_copy(atkbdc, dev);
return (0);
}
DRIVER_MODULE(psmcpnp, isa, psmcpnp_driver, psmcpnp_devclass, 0, 0);
DRIVER_MODULE(psmcpnp, acpi, psmcpnp_driver, psmcpnp_devclass, 0, 0);
ISA_PNP_INFO(psmcpnp_ids);
#endif /* DEV_ISA */
Reference in New Issue View Git Blame Copy Permalink