freebsd-dev/sys/dev/bwn/if_bwn_pcivar.h
Landon J. Fuller 8d14ca9c99 Introduce bwn(4) support for the bhnd(4) bus.
Currently, bwn(4) relies on the siba_bwn(4) bus driver to provide support
for the on-chip SSB interconnect found in Broadcom's older PCI(e) Wi-Fi
adapters. Non-PCI Wi-Fi adapters, as well as the newer BCMA interconnect
found in post-2009 Broadcom Wi-Fi hardware, are not supported by
siba_bwn(4).

The bhnd(4) bus driver (also used by the FreeBSD/MIPS Broadcom port)
provides a unified kernel interface to a superset of the hardware supported
by siba_bwn; by attaching bwn(4) via bhnd(4), we can support both modern
PCI(e) Wi-Fi devices based on the BCMA backplane interconnect, as well as
Broadcom MIPS WiSoCs that include a D11 MAC core directly attached to their
SSB or BCMA backplane.

This diff introduces opt-in bwn(4) support for bhnd(4) by providing:

 - A small bwn(4) driver subclass, if_bwn_bhnd, that attaches via
   bhnd(4) instead of siba_bwn(4).
 - A bhndb(4)-based PCI host bridge driver, if_bwn_pci, that optionally
   probes at a higher priority than the siba_bwn(4) PCI driver.
 - A set of compatibility shims that perform translation of bwn(4)'s
   siba_bwn function calls into their bhnd(9) API equivalents when bwn(4)
   is attached via a bhnd(4) bus parent. When bwn(4) is attached via
   siba_bwn(4), all siba_bwn function calls are simply passed through to
   their original implementations.

To test bwn(4) with bhnd(4), place the following lines in loader.conf(5):

  hw.bwn_pci.preferred="1"

  if_bwn_pci_load="YES
  bwn_v4_ucode_load="YES"
  bwn_v4_lp_ucode_load="YES"

To verify that bwn(4) is using bhnd(4), you can check dmesg:

  bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 15> ... on bhnd0

... or devinfo(8):

pcib2
  pci2
    bwn_pci0
      bhndb0
        bhnd0
          bwn0
          ...

bwn(4)/bhnd(4) has been tested for regressions with most chipsets currently
supported by bwn(4), including:

  - BCM4312
  - BCM4318
  - BCM4321

With minimal changes to the DMA code (not included in this commit), I was
also able to test support for newer BCMA devices by bringing up basic
working Wi-Fi on two previously unsupported, BCMA-based N-PHY chipsets:

  - BCM43224
  - BCM43225

Approved by:	adrian (mentor, implicit)
Sponsored by:	The FreeBSD Foundation & Plausible Labs
Differential Revision:	https://reviews.freebsd.org/D13041
2017-12-02 02:21:27 +00:00

101 lines
3.1 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2015-2016 Landon Fuller <landonf@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _IF_BWN_PCIVAR_H_
#define _IF_BWN_PCIVAR_H_
struct bwn_pci_devcfg;
/** bwn_pci per-instance state. */
struct bwn_pci_softc {
device_t dev; /**< device */
device_t bhndb_dev; /**< bhnd bridge device */
const struct bwn_pci_devcfg *devcfg; /**< bwn device config */
uint32_t quirks; /**< quirk flags */
};
/* bwn device quirks */
enum {
/** No quirks */
BWN_QUIRK_NONE = 0,
/**
* This model/revision has not been tested and may not work.
*/
BWN_QUIRK_UNTESTED = 1<<0,
/**
* Early dual-band devices did not support accessing multiple PHYs
* from a single WLAN core, and instead used separate 2GHz and 5GHz
* WLAN cores.
*
* However, not all cards with two WLAN cores are fully populated;
* we must whitelist the boards on which a second WLAN core is actually
* usable.
*/
BWN_QUIRK_WLAN_DUALCORE = 1<<1,
/**
* Some early devices shipped with unconnected ethernet cores; set
* this quirk to treat these cores as unpopulated.
*/
BWN_QUIRK_ENET_HW_UNPOPULATED = 1<<2,
/**
* Some PCI/PCIe "Intensi-fi" chipsets shipped with floating USB
* host controller cores; set this quirk to treat these cores as
* unpopulated.
*/
BWN_QUIRK_USBH_UNPOPULATED = 1<<3,
};
/* PCI device descriptor */
struct bwn_pci_device {
uint16_t vendor;
uint16_t device;
const char *desc;
uint32_t quirks;
};
#define BWN_BCM_DEV(_devid, _desc, _quirks) \
{ PCI_VENDOR_BROADCOM, PCI_DEVID_ ## _devid, \
"Broadcom " _desc " Wireless", _quirks }
/* Supported device table */
struct bwn_pci_devcfg {
const struct bhndb_hwcfg *bridge_hwcfg;
const struct bhndb_hw *bridge_hwtable;
const struct bhndb_hw_priority *bridge_hwprio;
const struct bwn_pci_device *devices;
};
#endif /* _IF_BWN_PCIVAR_H_ */