d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
73ecbbb39c
freebsd-dev/sys/cam/scsi/scsi_enc_ses.c
Alexander Motin ccba710262 Make CAM return and GEOM DISK pass through new GEOM::lunid attribute. 
SPC-4 specification states that serial number may be property of device,
but not a specific logical unit.  People reported about FC storages using
serial number in that way, making it unusable for purposes of LUN multipath
detection.  SPC-4 states that designators associated with logical unit from
the VPD page 83h "Device Identification" should be used for that purpose.
Report first of them in the new attribute in such preference order: NAA,
EUI-64, T10 and SCSI name string.

While there, make GEOM DISK properly report GEOM::ident in XML output also
using d_getattr() method, if available.  This fixes serial numbers reporting
for SCSI disks in `geom disk list` output and confxml.

Discussed with:	gibbs, ken
Sponsored by:	iXsystems, Inc.
MFC after:	2 weeks
2013-06-12 13:36:20 +00:00

2837 lines
79 KiB
C
Raw Blame History

/*-
* Copyright (c) 2000 Matthew Jacob
* Copyright (c) 2010 Spectra Logic Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/**
* \file scsi_enc_ses.c
*
* Structures and routines specific && private to SES only
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/ctype.h>
#include <sys/errno.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/queue.h>
#include <sys/sbuf.h>
#include <sys/sx.h>
#include <sys/systm.h>
#include <sys/types.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_periph.h>
#include <cam/scsi/scsi_message.h>
#include <cam/scsi/scsi_enc.h>
#include <cam/scsi/scsi_enc_internal.h>
/* SES Native Type Device Support */
/* SES Diagnostic Page Codes */
typedef enum {
SesSupportedPages = 0x0,
SesConfigPage = 0x1,
SesControlPage = 0x2,
SesStatusPage = SesControlPage,
SesHelpTxt = 0x3,
SesStringOut = 0x4,
SesStringIn = SesStringOut,
SesThresholdOut = 0x5,
SesThresholdIn = SesThresholdOut,
SesArrayControl = 0x6, /* Obsolete in SES v2 */
SesArrayStatus = SesArrayControl,
SesElementDescriptor = 0x7,
SesShortStatus = 0x8,
SesEnclosureBusy = 0x9,
SesAddlElementStatus = 0xa
} SesDiagPageCodes;
typedef struct ses_type {
const struct ses_elm_type_desc *hdr;
const char *text;
} ses_type_t;
typedef struct ses_comstat {
uint8_t comstatus;
uint8_t comstat[3];
} ses_comstat_t;
typedef union ses_addl_data {
struct ses_elm_sas_device_phy *sasdev_phys;
struct ses_elm_sas_expander_phy *sasexp_phys;
struct ses_elm_sas_port_phy *sasport_phys;
struct ses_fcobj_port *fc_ports;
} ses_add_data_t;
typedef struct ses_addl_status {
struct ses_elm_addlstatus_base_hdr *hdr;
union {
union ses_fcobj_hdr *fc;
union ses_elm_sas_hdr *sas;
} proto_hdr;
union ses_addl_data proto_data; /* array sizes stored in header */
} ses_add_status_t;
typedef struct ses_element {
uint8_t eip; /* eip bit is set */
uint16_t descr_len; /* length of the descriptor */
char *descr; /* descriptor for this object */
struct ses_addl_status addl; /* additional status info */
} ses_element_t;
typedef struct ses_control_request {
int elm_idx;
ses_comstat_t elm_stat;
int result;
TAILQ_ENTRY(ses_control_request) links;
} ses_control_request_t;
TAILQ_HEAD(ses_control_reqlist, ses_control_request);
typedef struct ses_control_reqlist ses_control_reqlist_t;
enum {
SES_SETSTATUS_ENC_IDX = -1
};
static void
ses_terminate_control_requests(ses_control_reqlist_t *reqlist, int result)
{
ses_control_request_t *req;
while ((req = TAILQ_FIRST(reqlist)) != NULL) {
TAILQ_REMOVE(reqlist, req, links);
req->result = result;
wakeup(req);
}
}
enum ses_iter_index_values {
/**
* \brief Value of an initialized but invalid index
* in a ses_iterator object.
*
* This value is used for the individual_element_index of
* overal status elements and for all index types when
* an iterator is first initialized.
*/
ITERATOR_INDEX_INVALID = -1,
/**
* \brief Value of an index in a ses_iterator object
* when the iterator has traversed past the last
* valid element..
*/
ITERATOR_INDEX_END = INT_MAX
};
/**
* \brief Structure encapsulating all data necessary to traverse the
* elements of a SES configuration.
*
* The ses_iterator object simplifies the task of iterating through all
* elements detected via the SES configuration page by tracking the numerous
* element indexes that, instead of memoizing in the softc, we calculate
* on the fly during the traversal of the element objects. The various
* indexes are necessary due to the varying needs of matching objects in
* the different SES pages. Some pages (e.g. Status/Control) contain all
* elements, while others (e.g. Additional Element Status) only contain
* individual elements (no overal status elements) of particular types.
*
* To use an iterator, initialize it with ses_iter_init(), and then
* use ses_iter_next() to traverse the elements (including the first) in
* the configuration. Once an iterator is initiailized with ses_iter_init(),
* you may also seek to any particular element by either it's global or
* individual element index via the ses_iter_seek_to() function. You may
* also return an iterator to the position just before the first element
* (i.e. the same state as after an ses_iter_init()), with ses_iter_reset().
*/
struct ses_iterator {
/**
* \brief Backlink to the overal software configuration structure.
*
* This is included for convenience so the iteration functions
* need only take a single, struct ses_iterator *, argument.
*/
enc_softc_t *enc;
enc_cache_t *cache;
/**
* \brief Index of the type of the current element within the
* ses_cache's ses_types array.
*/
int type_index;
/**
* \brief The position (0 based) of this element relative to all other
* elements of this type.
*
* This index resets to zero every time the iterator transitions
* to elements of a new type in the configuration.
*/
int type_element_index;
/**
* \brief The position (0 based) of this element relative to all
* other individual status elements in the configuration.
*
* This index ranges from 0 through the number of individual
* elements in the configuration. When the iterator returns
* an overall status element, individual_element_index is
* set to ITERATOR_INDEX_INVALID, to indicate that it does
* not apply to the current element.
*/
int individual_element_index;
/**
* \brief The position (0 based) of this element relative to
* all elements in the configration.
*
* This index is appropriate for indexing into enc->ses_elm_map.
*/
int global_element_index;
/**
* \brief The last valid individual element index of this
* iterator.
*
* When an iterator traverses an overal status element, the
* individual element index is reset to ITERATOR_INDEX_INVALID
* to prevent unintential use of the individual_element_index
* field. The saved_individual_element_index allows the iterator
* to restore it's position in the individual elements upon
* reaching the next individual element.
*/
int saved_individual_element_index;
};
typedef enum {
SES_UPDATE_NONE,
SES_UPDATE_PAGES,
SES_UPDATE_GETCONFIG,
SES_UPDATE_GETSTATUS,
SES_UPDATE_GETELMDESCS,
SES_UPDATE_GETELMADDLSTATUS,
SES_PROCESS_CONTROL_REQS,
SES_PUBLISH_PHYSPATHS,
SES_PUBLISH_CACHE,
SES_NUM_UPDATE_STATES
} ses_update_action;
static enc_softc_cleanup_t ses_softc_cleanup;
#define SCSZ 0x8000
static fsm_fill_handler_t ses_fill_rcv_diag_io;
static fsm_fill_handler_t ses_fill_control_request;
static fsm_done_handler_t ses_process_pages;
static fsm_done_handler_t ses_process_config;
static fsm_done_handler_t ses_process_status;
static fsm_done_handler_t ses_process_elm_descs;
static fsm_done_handler_t ses_process_elm_addlstatus;
static fsm_done_handler_t ses_process_control_request;
static fsm_done_handler_t ses_publish_physpaths;
static fsm_done_handler_t ses_publish_cache;
static struct enc_fsm_state enc_fsm_states[SES_NUM_UPDATE_STATES] =
{
{ "SES_UPDATE_NONE", 0, 0, 0, NULL, NULL, NULL },
{
"SES_UPDATE_PAGES",
SesSupportedPages,
SCSZ,
60 * 1000,
ses_fill_rcv_diag_io,
ses_process_pages,
enc_error
},
{
"SES_UPDATE_GETCONFIG",
SesConfigPage,
SCSZ,
60 * 1000,
ses_fill_rcv_diag_io,
ses_process_config,
enc_error
},
{
"SES_UPDATE_GETSTATUS",
SesStatusPage,
SCSZ,
60 * 1000,
ses_fill_rcv_diag_io,
ses_process_status,
enc_error
},
{
"SES_UPDATE_GETELMDESCS",
SesElementDescriptor,
SCSZ,
60 * 1000,
ses_fill_rcv_diag_io,
ses_process_elm_descs,
enc_error
},
{
"SES_UPDATE_GETELMADDLSTATUS",
SesAddlElementStatus,
SCSZ,
60 * 1000,
ses_fill_rcv_diag_io,
ses_process_elm_addlstatus,
enc_error
},
{
"SES_PROCESS_CONTROL_REQS",
SesControlPage,
SCSZ,
60 * 1000,
ses_fill_control_request,
ses_process_control_request,
enc_error
},
{
"SES_PUBLISH_PHYSPATHS",
0,
0,
0,
NULL,
ses_publish_physpaths,
NULL
},
{
"SES_PUBLISH_CACHE",
0,
0,
0,
NULL,
ses_publish_cache,
NULL
}
};
typedef struct ses_cache {
/* Source for all the configuration data pointers */
const struct ses_cfg_page *cfg_page;
/* References into the config page. */
const struct ses_enc_desc * const *subencs;
uint8_t ses_ntypes;
const ses_type_t *ses_types;
/* Source for all the status pointers */
const struct ses_status_page *status_page;
/* Source for all the object descriptor pointers */
const struct ses_elem_descr_page *elm_descs_page;
/* Source for all the additional object status pointers */
const struct ses_addl_elem_status_page *elm_addlstatus_page;
} ses_cache_t;
typedef struct ses_softc {
uint32_t ses_flags;
#define SES_FLAG_TIMEDCOMP 0x01
#define SES_FLAG_ADDLSTATUS 0x02
#define SES_FLAG_DESC 0x04
ses_control_reqlist_t ses_requests;
ses_control_reqlist_t ses_pending_requests;
} ses_softc_t;
/**
* \brief Reset a SES iterator to just before the first element
* in the configuration.
*
* \param iter The iterator object to reset.
*
* The indexes within a reset iterator are invalid and will only
* become valid upon completion of a ses_iter_seek_to() or a
* ses_iter_next().
*/
static void
ses_iter_reset(struct ses_iterator *iter)
{
/*
* Set our indexes to just before the first valid element
* of the first type (ITERATOR_INDEX_INVALID == -1). This
* simplifies the implementation of ses_iter_next().
*/
iter->type_index = 0;
iter->type_element_index = ITERATOR_INDEX_INVALID;
iter->global_element_index = ITERATOR_INDEX_INVALID;
iter->individual_element_index = ITERATOR_INDEX_INVALID;
iter->saved_individual_element_index = ITERATOR_INDEX_INVALID;
}
/**
* \brief Initialize the storage of a SES iterator and reset it to
* the position just before the first element of the
* configuration.
*
* \param enc The SES softc for the SES instance whose configuration
* will be enumerated by this iterator.
* \param iter The iterator object to initialize.
*/
static void
ses_iter_init(enc_softc_t *enc, enc_cache_t *cache, struct ses_iterator *iter)
{
iter->enc = enc;
iter->cache = cache;
ses_iter_reset(iter);
}
/**
* \brief Traverse the provided SES iterator to the next element
* within the configuraiton.
*
* \param iter The iterator to move.
*
* \return If a valid next element exists, a pointer to it's enc_element_t.
* Otherwise NULL.
*/
static enc_element_t *
ses_iter_next(struct ses_iterator *iter)
{
ses_cache_t *ses_cache;
const ses_type_t *element_type;
ses_cache = iter->cache->private;
/*
* Note: Treat nelms as signed, so we will hit this case
* and immediately terminate the iteration if the
* configuration has 0 objects.
*/
if (iter->global_element_index >= (int)iter->cache->nelms - 1) {
/* Elements exhausted. */
iter->type_index = ITERATOR_INDEX_END;
iter->type_element_index = ITERATOR_INDEX_END;
iter->global_element_index = ITERATOR_INDEX_END;
iter->individual_element_index = ITERATOR_INDEX_END;
return (NULL);
}
KASSERT((iter->type_index < ses_cache->ses_ntypes),
("Corrupted element iterator. %d not less than %d",
iter->type_index, ses_cache->ses_ntypes));
element_type = &ses_cache->ses_types[iter->type_index];
iter->global_element_index++;
iter->type_element_index++;
/*
* There is an object for overal type status in addition
* to one for each allowed element, but only if the element
* count is non-zero.
*/
if (iter->type_element_index > element_type->hdr->etype_maxelt) {
/*
* We've exhausted the elements of this type.
* This next element belongs to the next type.
*/
iter->type_index++;
iter->type_element_index = 0;
iter->saved_individual_element_index
= iter->individual_element_index;
iter->individual_element_index = ITERATOR_INDEX_INVALID;
}
if (iter->type_element_index > 0) {
if (iter->type_element_index == 1) {
iter->individual_element_index
= iter->saved_individual_element_index;
}
iter->individual_element_index++;
}
return (&iter->cache->elm_map[iter->global_element_index]);
}
/**
* Element index types tracked by a SES iterator.
*/
typedef enum {
/**
* Index relative to all elements (overall and individual)
* in the system.
*/
SES_ELEM_INDEX_GLOBAL,
/**
* \brief Index relative to all individual elements in the system.
*
* This index counts only individual elements, skipping overall
* status elements. This is the index space of the additional
* element status page (page 0xa).
*/
SES_ELEM_INDEX_INDIVIDUAL
} ses_elem_index_type_t;
/**
* \brief Move the provided iterator forwards or backwards to the object
* having the give index.
*
* \param iter The iterator on which to perform the seek.
* \param element_index The index of the element to find.
* \param index_type The type (global or individual) of element_index.
*
* \return If the element is found, a pointer to it's enc_element_t.
* Otherwise NULL.
*/
static enc_element_t *
ses_iter_seek_to(struct ses_iterator *iter, int element_index,
ses_elem_index_type_t index_type)
{
enc_element_t *element;
int *cur_index;
if (index_type == SES_ELEM_INDEX_GLOBAL)
cur_index = &iter->global_element_index;
else
cur_index = &iter->individual_element_index;
if (*cur_index == element_index) {
/* Already there. */
return (&iter->cache->elm_map[iter->global_element_index]);
}
ses_iter_reset(iter);
while ((element = ses_iter_next(iter)) != NULL
&& *cur_index != element_index)
;
if (*cur_index != element_index)
return (NULL);
return (element);
}
#if 0
static int ses_encode(enc_softc_t *, uint8_t *, int, int,
struct ses_comstat *);
#endif
static int ses_set_timed_completion(enc_softc_t *, uint8_t);
#if 0
static int ses_putstatus(enc_softc_t *, int, struct ses_comstat *);
#endif
static void ses_print_addl_data(enc_softc_t *, enc_element_t *);
/*=========================== SES cleanup routines ===========================*/
static void
ses_cache_free_elm_addlstatus(enc_softc_t *enc, enc_cache_t *cache)
{
ses_cache_t *ses_cache;
ses_cache_t *other_ses_cache;
enc_element_t *cur_elm;
enc_element_t *last_elm;
ENC_DLOG(enc, "%s: enter\n", __func__);
ses_cache = cache->private;
if (ses_cache->elm_addlstatus_page == NULL)
return;
for (cur_elm = cache->elm_map,
last_elm = &cache->elm_map[cache->nelms - 1];
cur_elm <= last_elm; cur_elm++) {
ses_element_t *elmpriv;
elmpriv = cur_elm->elm_private;
/* Clear references to the additional status page. */
bzero(&elmpriv->addl, sizeof(elmpriv->addl));
}
other_ses_cache = enc_other_cache(enc, cache)->private;
if (other_ses_cache->elm_addlstatus_page
!= ses_cache->elm_addlstatus_page)
ENC_FREE(ses_cache->elm_addlstatus_page);
ses_cache->elm_addlstatus_page = NULL;
}
static void
ses_cache_free_elm_descs(enc_softc_t *enc, enc_cache_t *cache)
{
ses_cache_t *ses_cache;
ses_cache_t *other_ses_cache;
enc_element_t *cur_elm;
enc_element_t *last_elm;
ENC_DLOG(enc, "%s: enter\n", __func__);
ses_cache = cache->private;
if (ses_cache->elm_descs_page == NULL)
return;
for (cur_elm = cache->elm_map,
last_elm = &cache->elm_map[cache->nelms - 1];
cur_elm <= last_elm; cur_elm++) {
ses_element_t *elmpriv;
elmpriv = cur_elm->elm_private;
elmpriv->descr_len = 0;
elmpriv->descr = NULL;
}
other_ses_cache = enc_other_cache(enc, cache)->private;
if (other_ses_cache->elm_descs_page
!= ses_cache->elm_descs_page)
ENC_FREE(ses_cache->elm_descs_page);
ses_cache->elm_descs_page = NULL;
}
static void
ses_cache_free_status(enc_softc_t *enc, enc_cache_t *cache)
{
ses_cache_t *ses_cache;
ses_cache_t *other_ses_cache;
ENC_DLOG(enc, "%s: enter\n", __func__);
ses_cache = cache->private;
if (ses_cache->status_page == NULL)
return;
other_ses_cache = enc_other_cache(enc, cache)->private;
if (other_ses_cache->status_page != ses_cache->status_page)
ENC_FREE(ses_cache->status_page);
ses_cache->status_page = NULL;
}
static void
ses_cache_free_elm_map(enc_softc_t *enc, enc_cache_t *cache)
{
enc_element_t *cur_elm;
enc_element_t *last_elm;
ENC_DLOG(enc, "%s: enter\n", __func__);
if (cache->elm_map == NULL)
return;
ses_cache_free_elm_descs(enc, cache);
ses_cache_free_elm_addlstatus(enc, cache);
for (cur_elm = cache->elm_map,
last_elm = &cache->elm_map[cache->nelms - 1];
cur_elm <= last_elm; cur_elm++) {
ENC_FREE_AND_NULL(cur_elm->elm_private);
}
ENC_FREE_AND_NULL(cache->elm_map);
cache->nelms = 0;
ENC_DLOG(enc, "%s: exit\n", __func__);
}
static void
ses_cache_free(enc_softc_t *enc, enc_cache_t *cache)
{
ses_cache_t *other_ses_cache;
ses_cache_t *ses_cache;
ENC_DLOG(enc, "%s: enter\n", __func__);
ses_cache_free_elm_addlstatus(enc, cache);
ses_cache_free_status(enc, cache);
ses_cache_free_elm_map(enc, cache);
ses_cache = cache->private;
ses_cache->ses_ntypes = 0;
other_ses_cache = enc_other_cache(enc, cache)->private;
if (other_ses_cache->subencs != ses_cache->subencs)
ENC_FREE(ses_cache->subencs);
ses_cache->subencs = NULL;
if (other_ses_cache->ses_types != ses_cache->ses_types)
ENC_FREE(ses_cache->ses_types);
ses_cache->ses_types = NULL;
if (other_ses_cache->cfg_page != ses_cache->cfg_page)
ENC_FREE(ses_cache->cfg_page);
ses_cache->cfg_page = NULL;
ENC_DLOG(enc, "%s: exit\n", __func__);
}
static void
ses_cache_clone(enc_softc_t *enc, enc_cache_t *src, enc_cache_t *dst)
{
ses_cache_t *dst_ses_cache;
ses_cache_t *src_ses_cache;
enc_element_t *src_elm;
enc_element_t *dst_elm;
enc_element_t *last_elm;
ses_cache_free(enc, dst);
src_ses_cache = src->private;
dst_ses_cache = dst->private;
/*
* The cloned enclosure cache and ses specific cache are
* mostly identical to the source.
*/
*dst = *src;
*dst_ses_cache = *src_ses_cache;
/*
* But the ses cache storage is still independent. Restore
* the pointer that was clobbered by the structure copy above.
*/
dst->private = dst_ses_cache;
/*
* The element map is independent even though it starts out
* pointing to the same constant page data.
*/
dst->elm_map = ENC_MALLOCZ(dst->nelms * sizeof(enc_element_t));
memcpy(dst->elm_map, src->elm_map, dst->nelms * sizeof(enc_element_t));
for (dst_elm = dst->elm_map, src_elm = src->elm_map,
last_elm = &src->elm_map[src->nelms - 1];
src_elm <= last_elm; src_elm++, dst_elm++) {
dst_elm->elm_private = ENC_MALLOCZ(sizeof(ses_element_t));
memcpy(dst_elm->elm_private, src_elm->elm_private,
sizeof(ses_element_t));
}
}
/* Structure accessors. These are strongly typed to avoid errors. */
int
ses_elm_sas_descr_type(union ses_elm_sas_hdr *obj)
{
return ((obj)->base_hdr.byte1 >> 6);
}
int
ses_elm_addlstatus_proto(struct ses_elm_addlstatus_base_hdr *hdr)
{
return ((hdr)->byte0 & 0xf);
}
int
ses_elm_addlstatus_eip(struct ses_elm_addlstatus_base_hdr *hdr)
{
return ((hdr)->byte0 >> 4) & 0x1;
}
int
ses_elm_addlstatus_invalid(struct ses_elm_addlstatus_base_hdr *hdr)
{
return ((hdr)->byte0 >> 7);
}
int
ses_elm_sas_type0_not_all_phys(union ses_elm_sas_hdr *hdr)
{
return ((hdr)->type0_noneip.byte1 & 0x1);
}
int
ses_elm_sas_dev_phy_sata_dev(struct ses_elm_sas_device_phy *phy)
{
return ((phy)->target_ports & 0x1);
}
int
ses_elm_sas_dev_phy_sata_port(struct ses_elm_sas_device_phy *phy)
{
return ((phy)->target_ports >> 7);
}
int
ses_elm_sas_dev_phy_dev_type(struct ses_elm_sas_device_phy *phy)
{
return (((phy)->byte0 >> 4) & 0x7);
}
/**
* \brief Verify that the cached configuration data in our softc
* is valid for processing the page data corresponding to
* the provided page header.
*
* \param ses_cache The SES cache to validate.
* \param gen_code The 4 byte generation code from a SES diagnostic
* page header.
*
* \return non-zero if true, 0 if false.
*/
static int
ses_config_cache_valid(ses_cache_t *ses_cache, const uint8_t *gen_code)
{
uint32_t cache_gc;
uint32_t cur_gc;
if (ses_cache->cfg_page == NULL)
return (0);
cache_gc = scsi_4btoul(ses_cache->cfg_page->hdr.gen_code);
cur_gc = scsi_4btoul(gen_code);
return (cache_gc == cur_gc);
}
/**
* Function signature for consumers of the ses_devids_iter() interface.
*/
typedef void ses_devid_callback_t(enc_softc_t *, enc_element_t *,
struct scsi_vpd_id_descriptor *, void *);
/**
* \brief Iterate over and create vpd device id records from the
* additional element status data for elm, passing that data
* to the provided callback.
*
* \param enc SES instance containing elm
* \param elm Element for which to extract device ID data.
* \param callback The callback function to invoke on each generated
* device id descriptor for elm.
* \param callback_arg Argument passed through to callback on each invocation.
*/
static void
ses_devids_iter(enc_softc_t *enc, enc_element_t *elm,
ses_devid_callback_t *callback, void *callback_arg)
{
ses_element_t *elmpriv;
struct ses_addl_status *addl;
u_int i;
size_t devid_record_size;
elmpriv = elm->elm_private;
addl = &(elmpriv->addl);
/*
* Don't assume this object has additional status information, or
* that it is a SAS device, or that it is a device slot device.
*/
if (addl->hdr == NULL || addl->proto_hdr.sas == NULL
|| addl->proto_data.sasdev_phys == NULL)
return;
devid_record_size = SVPD_DEVICE_ID_DESC_HDR_LEN
+ sizeof(struct scsi_vpd_id_naa_ieee_reg);
for (i = 0; i < addl->proto_hdr.sas->base_hdr.num_phys; i++) {
uint8_t devid_buf[devid_record_size];
struct scsi_vpd_id_descriptor *devid;
uint8_t *phy_addr;
devid = (struct scsi_vpd_id_descriptor *)devid_buf;
phy_addr = addl->proto_data.sasdev_phys[i].phy_addr;
devid->proto_codeset = (SCSI_PROTO_SAS << SVPD_ID_PROTO_SHIFT)
| SVPD_ID_CODESET_BINARY;
devid->id_type = SVPD_ID_PIV
| SVPD_ID_ASSOC_PORT
| SVPD_ID_TYPE_NAA;
devid->reserved = 0;
devid->length = sizeof(struct scsi_vpd_id_naa_ieee_reg);
memcpy(devid->identifier, phy_addr, devid->length);
callback(enc, elm, devid, callback_arg);
}
}
/**
* Function signature for consumers of the ses_paths_iter() interface.
*/
typedef void ses_path_callback_t(enc_softc_t *, enc_element_t *,
struct cam_path *, void *);
/**
* Argument package passed through ses_devids_iter() by
* ses_paths_iter() to ses_path_iter_devid_callback().
*/
typedef struct ses_path_iter_args {
ses_path_callback_t *callback;
void *callback_arg;
} ses_path_iter_args_t;
/**
* ses_devids_iter() callback function used by ses_paths_iter()
* to map device ids to peripheral driver instances.
*
* \param enc SES instance containing elm
* \param elm Element on which device ID matching is active.
* \param periph A device ID corresponding to elm.
* \param arg Argument passed through to callback on each invocation.
*/
static void
ses_path_iter_devid_callback(enc_softc_t *enc, enc_element_t *elem,
struct scsi_vpd_id_descriptor *devid,
void *arg)
{
struct ccb_dev_match cdm;
struct dev_match_pattern match_pattern;
struct dev_match_result match_result;
struct device_match_result *device_match;
struct device_match_pattern *device_pattern;
ses_path_iter_args_t *args;
struct cam_sim *sim;
args = (ses_path_iter_args_t *)arg;
match_pattern.type = DEV_MATCH_DEVICE;
device_pattern = &match_pattern.pattern.device_pattern;
device_pattern->flags = DEV_MATCH_DEVID;
device_pattern->data.devid_pat.id_len =
offsetof(struct scsi_vpd_id_descriptor, identifier)
+ devid->length;
memcpy(device_pattern->data.devid_pat.id, devid,
device_pattern->data.devid_pat.id_len);
memset(&cdm, 0, sizeof(cdm));
if (xpt_create_path_unlocked(&cdm.ccb_h.path, /*periph*/NULL,
CAM_XPT_PATH_ID,
CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP)
return;
cdm.ccb_h.func_code = XPT_DEV_MATCH;
cdm.num_patterns = 1;
cdm.patterns = &match_pattern;
cdm.pattern_buf_len = sizeof(match_pattern);
cdm.match_buf_len = sizeof(match_result);
cdm.matches = &match_result;
sim = xpt_path_sim(cdm.ccb_h.path);
CAM_SIM_LOCK(sim);
xpt_action((union ccb *)&cdm);
xpt_free_path(cdm.ccb_h.path);
CAM_SIM_UNLOCK(sim);
if ((cdm.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP
|| (cdm.status != CAM_DEV_MATCH_LAST
&& cdm.status != CAM_DEV_MATCH_MORE)
|| cdm.num_matches == 0)
return;
device_match = &match_result.result.device_result;
if (xpt_create_path_unlocked(&cdm.ccb_h.path, /*periph*/NULL,
device_match->path_id,
device_match->target_id,
device_match->target_lun) != CAM_REQ_CMP)
return;
args->callback(enc, elem, cdm.ccb_h.path, args->callback_arg);
sim = xpt_path_sim(cdm.ccb_h.path);
CAM_SIM_LOCK(sim);
xpt_free_path(cdm.ccb_h.path);
CAM_SIM_UNLOCK(sim);
}
/**
* \brief Iterate over and find the matching periph objects for the
* specified element.
*
* \param enc SES instance containing elm
* \param elm Element for which to perform periph object matching.
* \param callback The callback function to invoke with each matching
* periph object.
* \param callback_arg Argument passed through to callback on each invocation.
*/
static void
ses_paths_iter(enc_softc_t *enc, enc_element_t *elm,
ses_path_callback_t *callback, void *callback_arg)
{
ses_path_iter_args_t args;
args.callback = callback;
args.callback_arg = callback_arg;
ses_devids_iter(enc, elm, ses_path_iter_devid_callback, &args);
}
/**
* ses_paths_iter() callback function used by ses_get_elmdevname()
* to record periph driver instance strings corresponding to a SES
* element.
*
* \param enc SES instance containing elm
* \param elm Element on which periph matching is active.
* \param periph A periph instance that matches elm.
* \param arg Argument passed through to callback on each invocation.
*/
static void
ses_elmdevname_callback(enc_softc_t *enc, enc_element_t *elem,
struct cam_path *path, void *arg)
{
struct sbuf *sb;
sb = (struct sbuf *)arg;
cam_periph_list(path, sb);
}
/**
* Argument package passed through ses_paths_iter() to
* ses_getcampath_callback.
*/
typedef struct ses_setphyspath_callback_args {
struct sbuf *physpath;
int num_set;
} ses_setphyspath_callback_args_t;
/**
* \brief ses_paths_iter() callback to set the physical path on the
* CAM EDT entries corresponding to a given SES element.
*
* \param enc SES instance containing elm
* \param elm Element on which periph matching is active.
* \param periph A periph instance that matches elm.
* \param arg Argument passed through to callback on each invocation.
*/
static void
ses_setphyspath_callback(enc_softc_t *enc, enc_element_t *elm,
struct cam_path *path, void *arg)
{
struct ccb_dev_advinfo cdai;
ses_setphyspath_callback_args_t *args;
char *old_physpath;
args = (ses_setphyspath_callback_args_t *)arg;
old_physpath = malloc(MAXPATHLEN, M_SCSIENC, M_WAITOK|M_ZERO);
cam_periph_lock(enc->periph);
xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
cdai.buftype = CDAI_TYPE_PHYS_PATH;
cdai.flags = 0;
cdai.bufsiz = MAXPATHLEN;
cdai.buf = old_physpath;
xpt_action((union ccb *)&cdai);
if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
if (strcmp(old_physpath, sbuf_data(args->physpath)) != 0) {
xpt_setup_ccb(&cdai.ccb_h, path, CAM_PRIORITY_NORMAL);
cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
cdai.buftype = CDAI_TYPE_PHYS_PATH;
cdai.flags |= CDAI_FLAG_STORE;
cdai.bufsiz = sbuf_len(args->physpath);
cdai.buf = sbuf_data(args->physpath);
xpt_action((union ccb *)&cdai);
if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
if (cdai.ccb_h.status == CAM_REQ_CMP)
args->num_set++;
}
cam_periph_unlock(enc->periph);
free(old_physpath, M_SCSIENC);
}
/**
* \brief Set a device's physical path string in CAM XPT.
*
* \param enc SES instance containing elm
* \param elm Element to publish physical path string for
* \param iter Iterator whose state corresponds to elm
*
* \return 0 on success, errno otherwise.
*/
static int
ses_set_physpath(enc_softc_t *enc, enc_element_t *elm,
struct ses_iterator *iter)
{
struct ccb_dev_advinfo cdai;
ses_setphyspath_callback_args_t args;
int i, ret;
struct sbuf sb;
struct scsi_vpd_id_descriptor *idd;
uint8_t *devid;
ses_element_t *elmpriv;
const char *c;
ret = EIO;
devid = NULL;
/*
* Assemble the components of the physical path starting with
* the device ID of the enclosure itself.
*/
xpt_setup_ccb(&cdai.ccb_h, enc->periph->path, CAM_PRIORITY_NORMAL);
cdai.ccb_h.func_code = XPT_DEV_ADVINFO;
cdai.buftype = CDAI_TYPE_SCSI_DEVID;
cdai.bufsiz = CAM_SCSI_DEVID_MAXLEN;
cdai.buf = devid = ENC_MALLOCZ(cdai.bufsiz);
if (devid == NULL) {
ret = ENOMEM;
goto out;
}
cam_periph_lock(enc->periph);
xpt_action((union ccb *)&cdai);
if ((cdai.ccb_h.status & CAM_DEV_QFRZN) != 0)
cam_release_devq(cdai.ccb_h.path, 0, 0, 0, FALSE);
cam_periph_unlock(enc->periph);
if (cdai.ccb_h.status != CAM_REQ_CMP)
goto out;
idd = scsi_get_devid((struct scsi_vpd_device_id *)cdai.buf,
cdai.provsiz, scsi_devid_is_naa_ieee_reg);
if (idd == NULL)
goto out;
if (sbuf_new(&sb, NULL, 128, SBUF_AUTOEXTEND) == NULL) {
ret = ENOMEM;
goto out;
}
/* Next, generate the physical path string */
sbuf_printf(&sb, "id1,enc@n%jx/type@%x/slot@%x",
scsi_8btou64(idd->identifier), iter->type_index,
iter->type_element_index);
/* Append the element descriptor if one exists */
elmpriv = elm->elm_private;
if (elmpriv->descr != NULL && elmpriv->descr_len > 0) {
sbuf_cat(&sb, "/elmdesc@");
for (i = 0, c = elmpriv->descr; i < elmpriv->descr_len;
i++, c++) {
if (!isprint(*c) || isspace(*c) || *c == '/')
sbuf_putc(&sb, '_');
else
sbuf_putc(&sb, *c);
}
}
sbuf_finish(&sb);
/*
* Set this physical path on any CAM devices with a device ID
* descriptor that matches one created from the SES additional
* status data for this element.
*/
args.physpath= &sb;
args.num_set = 0;
ses_paths_iter(enc, elm, ses_setphyspath_callback, &args);
sbuf_delete(&sb);
ret = args.num_set == 0 ? ENOENT : 0;
out:
if (devid != NULL)
ENC_FREE(devid);
return (ret);
}
/**
* \brief Helper to set the CDB fields appropriately.
*
* \param cdb Buffer containing the cdb.
* \param pagenum SES diagnostic page to query for.
* \param dir Direction of query.
*/
static void
ses_page_cdb(char *cdb, int bufsiz, SesDiagPageCodes pagenum, int dir)
{
/* Ref: SPC-4 r25 Section 6.20 Table 223 */
if (dir == CAM_DIR_IN) {
cdb[0] = RECEIVE_DIAGNOSTIC;
cdb[1] = 1; /* Set page code valid bit */
cdb[2] = pagenum;
} else {
cdb[0] = SEND_DIAGNOSTIC;
cdb[1] = 0x10;
cdb[2] = pagenum;
}
cdb[3] = bufsiz >> 8; /* high bits */
cdb[4] = bufsiz & 0xff; /* low bits */
cdb[5] = 0;
}
/**
* \brief Discover whether this instance supports timed completion of a
* RECEIVE DIAGNOSTIC RESULTS command requesting the Enclosure Status
* page, and store the result in the softc, updating if necessary.
*
* \param enc SES instance to query and update.
* \param tc_en Value of timed completion to set (see \return).
*
* \return 1 if timed completion enabled, 0 otherwise.
*/
static int
ses_set_timed_completion(enc_softc_t *enc, uint8_t tc_en)
{
int err;
union ccb *ccb;
struct cam_periph *periph;
struct ses_mgmt_mode_page *mgmt;
uint8_t *mode_buf;
size_t mode_buf_len;
ses_softc_t *ses;
periph = enc->periph;
ses = enc->enc_private;
ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
mode_buf_len = sizeof(struct ses_mgmt_mode_page);
mode_buf = ENC_MALLOCZ(mode_buf_len);
if (mode_buf == NULL)
goto out;
scsi_mode_sense(&ccb->csio, /*retries*/4, enc_done, MSG_SIMPLE_Q_TAG,
/*dbd*/FALSE, SMS_PAGE_CTRL_CURRENT, SES_MGMT_MODE_PAGE_CODE,
mode_buf, mode_buf_len, SSD_FULL_SIZE, /*timeout*/60 * 1000);
/*
* Ignore illegal request errors, as they are quite common and we
* will print something out in that case anyway.
*/
err = cam_periph_runccb(ccb, enc_error, ENC_CFLAGS,
ENC_FLAGS|SF_QUIET_IR, NULL);
if (ccb->ccb_h.status != CAM_REQ_CMP) {
ENC_VLOG(enc, "Timed Completion Unsupported\n");
goto release;
}
/* Skip the mode select if the desired value is already set */
mgmt = (struct ses_mgmt_mode_page *)mode_buf;
if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) == tc_en)
goto done;
/* Value is not what we wanted, set it */
if (tc_en)
mgmt->byte5 |= SES_MGMT_TIMED_COMP_EN;
else
mgmt->byte5 &= ~SES_MGMT_TIMED_COMP_EN;
/* SES2r20: a completion time of zero means as long as possible */
bzero(&mgmt->max_comp_time, sizeof(mgmt->max_comp_time));
scsi_mode_select(&ccb->csio, 5, enc_done, MSG_SIMPLE_Q_TAG,
/*page_fmt*/FALSE, /*save_pages*/TRUE, mode_buf, mode_buf_len,
SSD_FULL_SIZE, /*timeout*/60 * 1000);
err = cam_periph_runccb(ccb, enc_error, ENC_CFLAGS, ENC_FLAGS, NULL);
if (ccb->ccb_h.status != CAM_REQ_CMP) {
ENC_VLOG(enc, "Timed Completion Set Failed\n");
goto release;
}
done:
if ((mgmt->byte5 & SES_MGMT_TIMED_COMP_EN) != 0) {
ENC_LOG(enc, "Timed Completion Enabled\n");
ses->ses_flags |= SES_FLAG_TIMEDCOMP;
} else {
ENC_LOG(enc, "Timed Completion Disabled\n");
ses->ses_flags &= ~SES_FLAG_TIMEDCOMP;
}
release:
ENC_FREE(mode_buf);
xpt_release_ccb(ccb);
out:
return (ses->ses_flags & SES_FLAG_TIMEDCOMP);
}
/**
* \brief Process the list of supported pages and update flags.
*
* \param enc SES device to query.
* \param buf Buffer containing the config page.
* \param xfer_len Length of the config page in the buffer.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_process_pages(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t **bufp, int error, int xfer_len)
{
ses_softc_t *ses;
struct scsi_diag_page *page;
int err, i, length;
CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE,
("entering %s(%p, %d)\n", __func__, bufp, xfer_len));
ses = enc->enc_private;
err = -1;
if (error != 0) {
err = error;
goto out;
}
if (xfer_len < sizeof(*page)) {
ENC_VLOG(enc, "Unable to parse Diag Pages List Header\n");
err = EIO;
goto out;
}
page = (struct scsi_diag_page *)*bufp;
length = scsi_2btoul(page->length);
if (length + offsetof(struct scsi_diag_page, params) > xfer_len) {
ENC_VLOG(enc, "Diag Pages List Too Long\n");
goto out;
}
ENC_DLOG(enc, "%s: page length %d, xfer_len %d\n",
__func__, length, xfer_len);
err = 0;
for (i = 0; i < length; i++) {
if (page->params[i] == SesElementDescriptor)
ses->ses_flags |= SES_FLAG_DESC;
else if (page->params[i] == SesAddlElementStatus)
ses->ses_flags |= SES_FLAG_ADDLSTATUS;
}
out:
ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err);
return (err);
}
/**
* \brief Process the config page and update associated structures.
*
* \param enc SES device to query.
* \param buf Buffer containing the config page.
* \param xfer_len Length of the config page in the buffer.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_process_config(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t **bufp, int error, int xfer_len)
{
struct ses_iterator iter;
ses_softc_t *ses;
enc_cache_t *enc_cache;
ses_cache_t *ses_cache;
uint8_t *buf;
int length;
int err;
int nelm;
int ntype;
struct ses_cfg_page *cfg_page;
struct ses_enc_desc *buf_subenc;
const struct ses_enc_desc **subencs;
const struct ses_enc_desc **cur_subenc;
const struct ses_enc_desc **last_subenc;
ses_type_t *ses_types;
ses_type_t *sestype;
const struct ses_elm_type_desc *cur_buf_type;
const struct ses_elm_type_desc *last_buf_type;
uint8_t *last_valid_byte;
enc_element_t *element;
const char *type_text;
CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE,
("entering %s(%p, %d)\n", __func__, bufp, xfer_len));
ses = enc->enc_private;
enc_cache = &enc->enc_daemon_cache;
ses_cache = enc_cache->private;
buf = *bufp;
err = -1;
if (error != 0) {
err = error;
goto out;
}
if (xfer_len < sizeof(cfg_page->hdr)) {
ENC_VLOG(enc, "Unable to parse SES Config Header\n");
err = EIO;
goto out;
}
cfg_page = (struct ses_cfg_page *)buf;
length = ses_page_length(&cfg_page->hdr);
if (length > xfer_len) {
ENC_VLOG(enc, "Enclosure Config Page Too Long\n");
goto out;
}
last_valid_byte = &buf[length - 1];
ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n",
__func__, length, xfer_len);
err = 0;
if (ses_config_cache_valid(ses_cache, cfg_page->hdr.gen_code)) {
/* Our cache is still valid. Proceed to fetching status. */
goto out;
}
/* Cache is no longer valid. Free old data to make way for new. */
ses_cache_free(enc, enc_cache);
ENC_VLOG(enc, "Generation Code 0x%x has %d SubEnclosures\n",
scsi_4btoul(cfg_page->hdr.gen_code),
ses_cfg_page_get_num_subenc(cfg_page));
/* Take ownership of the buffer. */
ses_cache->cfg_page = cfg_page;
*bufp = NULL;
/*
* Now waltz through all the subenclosures summing the number of
* types available in each.
*/
subencs = ENC_MALLOCZ(ses_cfg_page_get_num_subenc(cfg_page)
* sizeof(*subencs));
if (subencs == NULL) {
err = ENOMEM;
goto out;
}
/*
* Sub-enclosure data is const after construction (i.e. when
* accessed via our cache object.
*
* The cast here is not required in C++ but C99 is not so
* sophisticated (see C99 6.5.16.1(1)).
*/
ses_cache->subencs = subencs;
buf_subenc = cfg_page->subencs;
cur_subenc = subencs;
last_subenc = &subencs[ses_cfg_page_get_num_subenc(cfg_page) - 1];
ntype = 0;
while (cur_subenc <= last_subenc) {
if (!ses_enc_desc_is_complete(buf_subenc, last_valid_byte)) {
ENC_VLOG(enc, "Enclosure %d Beyond End of "
"Descriptors\n", cur_subenc - subencs);
err = EIO;
goto out;
}
ENC_VLOG(enc, " SubEnclosure ID %d, %d Types With this ID, "
"Descriptor Length %d, offset %d\n", buf_subenc->subenc_id,
buf_subenc->num_types, buf_subenc->length,
&buf_subenc->byte0 - buf);
ENC_VLOG(enc, "WWN: %jx\n",
(uintmax_t)scsi_8btou64(buf_subenc->logical_id));
ntype += buf_subenc->num_types;
*cur_subenc = buf_subenc;
cur_subenc++;
buf_subenc = ses_enc_desc_next(buf_subenc);
}
/* Process the type headers. */
ses_types = ENC_MALLOCZ(ntype * sizeof(*ses_types));
if (ses_types == NULL) {
err = ENOMEM;
goto out;
}
/*
* Type data is const after construction (i.e. when accessed via
* our cache object.
*/
ses_cache->ses_types = ses_types;
cur_buf_type = (const struct ses_elm_type_desc *)
(&(*last_subenc)->length + (*last_subenc)->length + 1);
last_buf_type = cur_buf_type + ntype - 1;
type_text = (const uint8_t *)(last_buf_type + 1);
nelm = 0;
sestype = ses_types;
while (cur_buf_type <= last_buf_type) {
if (&cur_buf_type->etype_txt_len > last_valid_byte) {
ENC_VLOG(enc, "Runt Enclosure Type Header %d\n",
sestype - ses_types);
err = EIO;
goto out;
}
sestype->hdr = cur_buf_type;
sestype->text = type_text;
type_text += cur_buf_type->etype_txt_len;
ENC_VLOG(enc, " Type Desc[%d]: Type 0x%x, MaxElt %d, In Subenc "
"%d, Text Length %d: %.*s\n", sestype - ses_types,
sestype->hdr->etype_elm_type, sestype->hdr->etype_maxelt,
sestype->hdr->etype_subenc, sestype->hdr->etype_txt_len,
sestype->hdr->etype_txt_len, sestype->text);
nelm += sestype->hdr->etype_maxelt
+ /*overall status element*/1;
sestype++;
cur_buf_type++;
}
/* Create the object map. */
enc_cache->elm_map = ENC_MALLOCZ(nelm * sizeof(enc_element_t));
if (enc_cache->elm_map == NULL) {
err = ENOMEM;
goto out;
}
ses_cache->ses_ntypes = (uint8_t)ntype;
enc_cache->nelms = nelm;
ses_iter_init(enc, enc_cache, &iter);
while ((element = ses_iter_next(&iter)) != NULL) {
const struct ses_elm_type_desc *thdr;
ENC_DLOG(enc, "%s: checking obj %d(%d,%d)\n", __func__,
iter.global_element_index, iter.type_index, nelm,
iter.type_element_index);
thdr = ses_cache->ses_types[iter.type_index].hdr;
element->subenclosure = thdr->etype_subenc;
element->enctype = thdr->etype_elm_type;
element->overall_status_elem = iter.type_element_index == 0;
element->elm_private = ENC_MALLOCZ(sizeof(ses_element_t));
if (element->elm_private == NULL) {
err = ENOMEM;
goto out;
}
ENC_DLOG(enc, "%s: creating elmpriv %d(%d,%d) subenc %d "
"type 0x%x\n", __func__, iter.global_element_index,
iter.type_index, iter.type_element_index,
thdr->etype_subenc, thdr->etype_elm_type);
}
err = 0;
out:
if (err)
ses_cache_free(enc, enc_cache);
else {
enc_update_request(enc, SES_UPDATE_GETSTATUS);
if (ses->ses_flags & SES_FLAG_DESC)
enc_update_request(enc, SES_UPDATE_GETELMDESCS);
if (ses->ses_flags & SES_FLAG_ADDLSTATUS)
enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS);
enc_update_request(enc, SES_PUBLISH_CACHE);
}
ENC_DLOG(enc, "%s: exiting with err %d\n", __func__, err);
return (err);
}
/**
* \brief Update the status page and associated structures.
*
* \param enc SES softc to update for.
* \param buf Buffer containing the status page.
* \param bufsz Amount of data in the buffer.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_process_status(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t **bufp, int error, int xfer_len)
{
struct ses_iterator iter;
enc_element_t *element;
ses_softc_t *ses;
enc_cache_t *enc_cache;
ses_cache_t *ses_cache;
uint8_t *buf;
int err = -1;
int length;
struct ses_status_page *page;
union ses_status_element *cur_stat;
union ses_status_element *last_stat;
ses = enc->enc_private;
enc_cache = &enc->enc_daemon_cache;
ses_cache = enc_cache->private;
buf = *bufp;
ENC_DLOG(enc, "%s: enter (%p, %p, %d)\n", __func__, enc, buf, xfer_len);
page = (struct ses_status_page *)buf;
length = ses_page_length(&page->hdr);
if (error != 0) {
err = error;
goto out;
}
/*
* Make sure the length fits in the buffer.
*
* XXX all this means is that the page is larger than the space
* we allocated. Since we use a statically sized buffer, this
* could happen... Need to use dynamic discovery of the size.
*/
if (length > xfer_len) {
ENC_VLOG(enc, "Enclosure Status Page Too Long\n");
goto out;
}
/* Make sure the length contains at least one header and status */
if (length < (sizeof(*page) + sizeof(*page->elements))) {
ENC_VLOG(enc, "Enclosure Status Page Too Short\n");
goto out;
}
if (!ses_config_cache_valid(ses_cache, page->hdr.gen_code)) {
ENC_DLOG(enc, "%s: Generation count change detected\n",
__func__);
enc_update_request(enc, SES_UPDATE_GETCONFIG);
goto out;
}
ses_cache_free_status(enc, enc_cache);
ses_cache->status_page = page;
*bufp = NULL;
enc_cache->enc_status = page->hdr.page_specific_flags;
/*
* Read in individual element status. The element order
* matches the order reported in the config page (i.e. the
* order of an unfiltered iteration of the config objects)..
*/
ses_iter_init(enc, enc_cache, &iter);
cur_stat = page->elements;
last_stat = (union ses_status_element *)
&buf[length - sizeof(*last_stat)];
ENC_DLOG(enc, "%s: total page length %d, xfer_len %d\n",
__func__, length, xfer_len);
while (cur_stat <= last_stat
&& (element = ses_iter_next(&iter)) != NULL) {
ENC_DLOG(enc, "%s: obj %d(%d,%d) off=0x%tx status=%jx\n",
__func__, iter.global_element_index, iter.type_index,
iter.type_element_index, (uint8_t *)cur_stat - buf,
scsi_4btoul(cur_stat->bytes));
memcpy(&element->encstat, cur_stat, sizeof(element->encstat));
element->svalid = 1;
cur_stat++;
}
if (ses_iter_next(&iter) != NULL) {
ENC_VLOG(enc, "Status page, length insufficient for "
"expected number of objects\n");
} else {
if (cur_stat <= last_stat)
ENC_VLOG(enc, "Status page, exhausted objects before "
"exhausing page\n");
enc_update_request(enc, SES_PUBLISH_CACHE);
err = 0;
}
out:
ENC_DLOG(enc, "%s: exiting with error %d\n", __func__, err);
return (err);
}
typedef enum {
/**
* The enclosure should not provide additional element
* status for this element type in page 0x0A.
*
* \note This status is returned for any types not
* listed SES3r02. Further types added in a
* future specification will be incorrectly
* classified.
*/
TYPE_ADDLSTATUS_NONE,
/**
* The element type provides additional element status
* in page 0x0A.
*/
TYPE_ADDLSTATUS_MANDATORY,
/**
* The element type may provide additional element status
* in page 0x0A, but i
*/
TYPE_ADDLSTATUS_OPTIONAL
} ses_addlstatus_avail_t;
/**
* \brief Check to see whether a given type (as obtained via type headers) is
* supported by the additional status command.
*
* \param enc SES softc to check.
* \param typidx Type index to check for.
*
* \return An enumeration indicating if additional status is mandatory,
* optional, or not required for this type.
*/
static ses_addlstatus_avail_t
ses_typehasaddlstatus(enc_softc_t *enc, uint8_t typidx)
{
enc_cache_t *enc_cache;
ses_cache_t *ses_cache;
enc_cache = &enc->enc_daemon_cache;
ses_cache = enc_cache->private;
switch(ses_cache->ses_types[typidx].hdr->etype_elm_type) {
case ELMTYP_DEVICE:
case ELMTYP_ARRAY_DEV:
case ELMTYP_SAS_EXP:
return (TYPE_ADDLSTATUS_MANDATORY);
case ELMTYP_SCSI_INI:
case ELMTYP_SCSI_TGT:
case ELMTYP_ESCC:
return (TYPE_ADDLSTATUS_OPTIONAL);
default:
/* No additional status information available. */
break;
}
return (TYPE_ADDLSTATUS_NONE);
}
static int ses_get_elm_addlstatus_fc(enc_softc_t *, enc_cache_t *,
uint8_t *, int);
static int ses_get_elm_addlstatus_sas(enc_softc_t *, enc_cache_t *, uint8_t *,
int, int, int, int);
/**
* \brief Parse the additional status element data for each object.
*
* \param enc The SES softc to update.
* \param buf The buffer containing the additional status
* element response.
* \param xfer_len Size of the buffer.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_process_elm_addlstatus(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t **bufp, int error, int xfer_len)
{
struct ses_iterator iter, titer;
int eip;
int err;
int ignore_index = 0;
int length;
int offset;
enc_cache_t *enc_cache;
ses_cache_t *ses_cache;
uint8_t *buf;
ses_element_t *elmpriv;
const struct ses_page_hdr *hdr;
enc_element_t *element, *telement;
enc_cache = &enc->enc_daemon_cache;
ses_cache = enc_cache->private;
buf = *bufp;
err = -1;
if (error != 0) {
err = error;
goto out;
}
ses_cache_free_elm_addlstatus(enc, enc_cache);
ses_cache->elm_addlstatus_page =
(struct ses_addl_elem_status_page *)buf;
*bufp = NULL;
/*
* The objects appear in the same order here as in Enclosure Status,
* which itself is ordered by the Type Descriptors from the Config
* page. However, it is necessary to skip elements that are not
* supported by this page when counting them.
*/
hdr = &ses_cache->elm_addlstatus_page->hdr;
length = ses_page_length(hdr);
ENC_DLOG(enc, "Additional Element Status Page Length 0x%x\n", length);
/* Make sure the length includes at least one header. */
if (length < sizeof(*hdr)+sizeof(struct ses_elm_addlstatus_base_hdr)) {
ENC_VLOG(enc, "Runt Additional Element Status Page\n");
goto out;
}
if (length > xfer_len) {
ENC_VLOG(enc, "Additional Element Status Page Too Long\n");
goto out;
}
if (!ses_config_cache_valid(ses_cache, hdr->gen_code)) {
ENC_DLOG(enc, "%s: Generation count change detected\n",
__func__);
enc_update_request(enc, SES_UPDATE_GETCONFIG);
goto out;
}
offset = sizeof(struct ses_page_hdr);
ses_iter_init(enc, enc_cache, &iter);
while (offset < length
&& (element = ses_iter_next(&iter)) != NULL) {
struct ses_elm_addlstatus_base_hdr *elm_hdr;
int proto_info_len;
ses_addlstatus_avail_t status_type;
/*
* Additional element status is only provided for
* individual elements (i.e. overal status elements
* are excluded) and those of the types specified
* in the SES spec.
*/
status_type = ses_typehasaddlstatus(enc, iter.type_index);
if (iter.individual_element_index == ITERATOR_INDEX_INVALID
|| status_type == TYPE_ADDLSTATUS_NONE)
continue;
elm_hdr = (struct ses_elm_addlstatus_base_hdr *)&buf[offset];
eip = ses_elm_addlstatus_eip(elm_hdr);
if (eip && !ignore_index) {
struct ses_elm_addlstatus_eip_hdr *eip_hdr;
int expected_index;
eip_hdr = (struct ses_elm_addlstatus_eip_hdr *)elm_hdr;
expected_index = iter.individual_element_index;
titer = iter;
telement = ses_iter_seek_to(&titer,
eip_hdr->element_index,
SES_ELEM_INDEX_INDIVIDUAL);
if (telement != NULL &&
(ses_typehasaddlstatus(enc, titer.type_index) !=
TYPE_ADDLSTATUS_NONE ||
titer.type_index > ELMTYP_SAS_CONN)) {
iter = titer;
element = telement;
} else
ignore_index = 1;
if (iter.individual_element_index > expected_index
&& status_type == TYPE_ADDLSTATUS_MANDATORY) {
ENC_VLOG(enc, "%s: provided element "
"index %d skips mandatory status "
" element at index %d\n",
__func__, eip_hdr->element_index,
expected_index);
}
}
elmpriv = element->elm_private;
elmpriv->addl.hdr = elm_hdr;
ENC_DLOG(enc, "%s: global element index=%d, type index=%d "
"type element index=%d, offset=0x%x, "
"byte0=0x%x, length=0x%x\n", __func__,
iter.global_element_index, iter.type_index,
iter.type_element_index, offset, elmpriv->addl.hdr->byte0,
elmpriv->addl.hdr->length);
/* Skip to after the length field */
offset += sizeof(struct ses_elm_addlstatus_base_hdr);
/* Make sure the descriptor is within bounds */
if ((offset + elmpriv->addl.hdr->length) > length) {
ENC_VLOG(enc, "Element %d Beyond End "
"of Additional Element Status Descriptors\n",
iter.global_element_index);
break;
}
/* Advance to the protocol data, skipping eip bytes if needed */
offset += (eip * SES_EIP_HDR_EXTRA_LEN);
proto_info_len = elmpriv->addl.hdr->length
- (eip * SES_EIP_HDR_EXTRA_LEN);
/* Errors in this block are ignored as they are non-fatal */
switch(ses_elm_addlstatus_proto(elmpriv->addl.hdr)) {
case SPSP_PROTO_FC:
if (elmpriv->addl.hdr->length == 0)
break;
ses_get_elm_addlstatus_fc(enc, enc_cache,
&buf[offset], proto_info_len);
break;
case SPSP_PROTO_SAS:
if (elmpriv->addl.hdr->length <= 2)
break;
ses_get_elm_addlstatus_sas(enc, enc_cache,
&buf[offset],
proto_info_len,
eip, iter.type_index,
iter.global_element_index);
break;
default:
ENC_VLOG(enc, "Element %d: Unknown Additional Element "
"Protocol 0x%x\n", iter.global_element_index,
ses_elm_addlstatus_proto(elmpriv->addl.hdr));
break;
}
offset += proto_info_len;
}
err = 0;
out:
if (err)
ses_cache_free_elm_addlstatus(enc, enc_cache);
enc_update_request(enc, SES_PUBLISH_PHYSPATHS);
enc_update_request(enc, SES_PUBLISH_CACHE);
return (err);
}
static int
ses_process_control_request(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t **bufp, int error, int xfer_len)
{
ses_softc_t *ses;
ses = enc->enc_private;
/*
* Possible errors:
* o Generation count wrong.
* o Some SCSI status error.
*/
ses_terminate_control_requests(&ses->ses_pending_requests, error);
enc_update_request(enc, SES_UPDATE_GETSTATUS);
return (0);
}
static int
ses_publish_physpaths(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t **bufp, int error, int xfer_len)
{
struct ses_iterator iter;
enc_cache_t *enc_cache;
ses_cache_t *ses_cache;
enc_element_t *element;
enc_cache = &enc->enc_daemon_cache;
ses_cache = enc_cache->private;
ses_iter_init(enc, enc_cache, &iter);
while ((element = ses_iter_next(&iter)) != NULL) {
/*
* ses_set_physpath() returns success if we changed
* the physpath of any element. This allows us to
* only announce devices once regardless of how
* many times we process additional element status.
*/
if (ses_set_physpath(enc, element, &iter) == 0)
ses_print_addl_data(enc, element);
}
return (0);
}
static int
ses_publish_cache(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t **bufp, int error, int xfer_len)
{
sx_xlock(&enc->enc_cache_lock);
ses_cache_clone(enc, /*src*/&enc->enc_daemon_cache,
/*dst*/&enc->enc_cache);
sx_xunlock(&enc->enc_cache_lock);
return (0);
}
/**
* \brief Parse the descriptors for each object.
*
* \param enc The SES softc to update.
* \param buf The buffer containing the descriptor list response.
* \param xfer_len Size of the buffer.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_process_elm_descs(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t **bufp, int error, int xfer_len)
{
ses_softc_t *ses;
struct ses_iterator iter;
enc_element_t *element;
int err;
int offset;
u_long length, plength;
enc_cache_t *enc_cache;
ses_cache_t *ses_cache;
uint8_t *buf;
ses_element_t *elmpriv;
const struct ses_page_hdr *phdr;
const struct ses_elm_desc_hdr *hdr;
ses = enc->enc_private;
enc_cache = &enc->enc_daemon_cache;
ses_cache = enc_cache->private;
buf = *bufp;
err = -1;
if (error != 0) {
err = error;
goto out;
}
ses_cache_free_elm_descs(enc, enc_cache);
ses_cache->elm_descs_page = (struct ses_elem_descr_page *)buf;
*bufp = NULL;
phdr = &ses_cache->elm_descs_page->hdr;
plength = ses_page_length(phdr);
if (xfer_len < sizeof(struct ses_page_hdr)) {
ENC_VLOG(enc, "Runt Element Descriptor Page\n");
goto out;
}
if (plength > xfer_len) {
ENC_VLOG(enc, "Element Descriptor Page Too Long\n");
goto out;
}
if (!ses_config_cache_valid(ses_cache, phdr->gen_code)) {
ENC_VLOG(enc, "%s: Generation count change detected\n",
__func__);
enc_update_request(enc, SES_UPDATE_GETCONFIG);
goto out;
}
offset = sizeof(struct ses_page_hdr);
ses_iter_init(enc, enc_cache, &iter);
while (offset < plength
&& (element = ses_iter_next(&iter)) != NULL) {
if ((offset + sizeof(struct ses_elm_desc_hdr)) > plength) {
ENC_VLOG(enc, "Element %d Descriptor Header Past "
"End of Buffer\n", iter.global_element_index);
goto out;
}
hdr = (struct ses_elm_desc_hdr *)&buf[offset];
length = scsi_2btoul(hdr->length);
ENC_DLOG(enc, "%s: obj %d(%d,%d) length=%d off=%d\n", __func__,
iter.global_element_index, iter.type_index,
iter.type_element_index, length, offset);
if ((offset + sizeof(*hdr) + length) > plength) {
ENC_VLOG(enc, "Element%d Descriptor Past "
"End of Buffer\n", iter.global_element_index);
goto out;
}
offset += sizeof(*hdr);
if (length > 0) {
elmpriv = element->elm_private;
elmpriv->descr_len = length;
elmpriv->descr = &buf[offset];
}
/* skip over the descriptor itself */
offset += length;
}
err = 0;
out:
if (err == 0) {
if (ses->ses_flags & SES_FLAG_ADDLSTATUS)
enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS);
}
enc_update_request(enc, SES_PUBLISH_CACHE);
return (err);
}
static int
ses_fill_rcv_diag_io(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t *buf)
{
if (enc->enc_type == ENC_SEMB_SES) {
semb_receive_diagnostic_results(&ccb->ataio, /*retries*/5,
enc_done, MSG_SIMPLE_Q_TAG, /*pcv*/1,
state->page_code, buf, state->buf_size,
state->timeout);
} else {
scsi_receive_diagnostic_results(&ccb->csio, /*retries*/5,
enc_done, MSG_SIMPLE_Q_TAG, /*pcv*/1,
state->page_code, buf, state->buf_size,
SSD_FULL_SIZE, state->timeout);
}
return (0);
}
/**
* \brief Encode the object status into the response buffer, which is
* expected to contain the current enclosure status. This function
* turns off all the 'select' bits for the objects except for the
* object specified, then sends it back to the enclosure.
*
* \param enc SES enclosure the change is being applied to.
* \param buf Buffer containing the current enclosure status response.
* \param amt Length of the response in the buffer.
* \param req The control request to be applied to buf.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_encode(enc_softc_t *enc, uint8_t *buf, int amt, ses_control_request_t *req)
{
struct ses_iterator iter;
enc_element_t *element;
int offset;
struct ses_control_page_hdr *hdr;
ses_iter_init(enc, &enc->enc_cache, &iter);
hdr = (struct ses_control_page_hdr *)buf;
if (req->elm_idx == -1) {
/* for enclosure status, at least 2 bytes are needed */
if (amt < 2)
return EIO;
hdr->control_flags =
req->elm_stat.comstatus & SES_SET_STATUS_MASK;
ENC_DLOG(enc, "Set EncStat %x\n", hdr->control_flags);
return (0);
}
element = ses_iter_seek_to(&iter, req->elm_idx, SES_ELEM_INDEX_GLOBAL);
if (element == NULL)
return (ENXIO);
/*
* Seek to the type set that corresponds to the requested object.
* The +1 is for the overall status element for the type.
*/
offset = sizeof(struct ses_control_page_hdr)
+ (iter.global_element_index * sizeof(struct ses_comstat));
/* Check for buffer overflow. */
if (offset + sizeof(struct ses_comstat) > amt)
return (EIO);
/* Set the status. */
memcpy(&buf[offset], &req->elm_stat, sizeof(struct ses_comstat));
ENC_DLOG(enc, "Set Type 0x%x Obj 0x%x (offset %d) with %x %x %x %x\n",
iter.type_index, iter.global_element_index, offset,
req->elm_stat.comstatus, req->elm_stat.comstat[0],
req->elm_stat.comstat[1], req->elm_stat.comstat[2]);
return (0);
}
static int
ses_fill_control_request(enc_softc_t *enc, struct enc_fsm_state *state,
union ccb *ccb, uint8_t *buf)
{
ses_softc_t *ses;
enc_cache_t *enc_cache;
ses_cache_t *ses_cache;
struct ses_control_page_hdr *hdr;
ses_control_request_t *req;
size_t plength;
size_t offset;
ses = enc->enc_private;
enc_cache = &enc->enc_daemon_cache;
ses_cache = enc_cache->private;
hdr = (struct ses_control_page_hdr *)buf;
if (ses_cache->status_page == NULL) {
ses_terminate_control_requests(&ses->ses_requests, EIO);
return (EIO);
}
plength = ses_page_length(&ses_cache->status_page->hdr);
memcpy(buf, ses_cache->status_page, plength);
/* Disable the select bits in all status entries. */
offset = sizeof(struct ses_control_page_hdr);
for (offset = sizeof(struct ses_control_page_hdr);
offset < plength; offset += sizeof(struct ses_comstat)) {
buf[offset] &= ~SESCTL_CSEL;
}
/* And make sure the INVOP bit is clear. */
hdr->control_flags &= ~SES_ENCSTAT_INVOP;
/* Apply incoming requests. */
while ((req = TAILQ_FIRST(&ses->ses_requests)) != NULL) {
TAILQ_REMOVE(&ses->ses_requests, req, links);
req->result = ses_encode(enc, buf, plength, req);
if (req->result != 0) {
wakeup(req);
continue;
}
TAILQ_INSERT_TAIL(&ses->ses_pending_requests, req, links);
}
if (TAILQ_EMPTY(&ses->ses_pending_requests) != 0)
return (ENOENT);
/* Fill out the ccb */
if (enc->enc_type == ENC_SEMB_SES) {
semb_send_diagnostic(&ccb->ataio, /*retries*/5, enc_done,
MSG_SIMPLE_Q_TAG,
buf, ses_page_length(&ses_cache->status_page->hdr),
state->timeout);
} else {
scsi_send_diagnostic(&ccb->csio, /*retries*/5, enc_done,
MSG_SIMPLE_Q_TAG, /*unit_offline*/0,
/*device_offline*/0, /*self_test*/0,
/*page_format*/1, /*self_test_code*/0,
buf, ses_page_length(&ses_cache->status_page->hdr),
SSD_FULL_SIZE, state->timeout);
}
return (0);
}
static int
ses_get_elm_addlstatus_fc(enc_softc_t *enc, enc_cache_t *enc_cache,
uint8_t *buf, int bufsiz)
{
ENC_VLOG(enc, "FC Device Support Stubbed in Additional Status Page\n");
return (ENODEV);
}
#define SES_PRINT_PORTS(p, type) do { \
sbuf_printf(sbp, " %s(", type); \
if (((p) & SES_SASOBJ_DEV_PHY_PROTOMASK) == 0) \
sbuf_printf(sbp, " None"); \
else { \
if ((p) & SES_SASOBJ_DEV_PHY_SMP) \
sbuf_printf(sbp, " SMP"); \
if ((p) & SES_SASOBJ_DEV_PHY_STP) \
sbuf_printf(sbp, " STP"); \
if ((p) & SES_SASOBJ_DEV_PHY_SSP) \
sbuf_printf(sbp, " SSP"); \
} \
sbuf_printf(sbp, " )"); \
} while(0)
/**
* \brief Print the additional element status data for this object, for SAS
* type 0 objects. See SES2 r20 Section 6.1.13.3.2.
*
* \param sesname SES device name associated with the object.
* \param sbp Sbuf to print to.
* \param obj The object to print the data for.
* \param periph_name Peripheral string associated with the object.
*/
static void
ses_print_addl_data_sas_type0(char *sesname, struct sbuf *sbp,
enc_element_t *obj, char *periph_name)
{
int i;
ses_element_t *elmpriv;
struct ses_addl_status *addl;
struct ses_elm_sas_device_phy *phy;
elmpriv = obj->elm_private;
addl = &(elmpriv->addl);
if (addl->proto_hdr.sas == NULL)
return;
sbuf_printf(sbp, "%s: %s: SAS Device Slot Element:",
sesname, periph_name);
sbuf_printf(sbp, " %d Phys", addl->proto_hdr.sas->base_hdr.num_phys);
if (ses_elm_addlstatus_eip(addl->hdr))
sbuf_printf(sbp, " at Slot %d",
addl->proto_hdr.sas->type0_eip.dev_slot_num);
if (ses_elm_sas_type0_not_all_phys(addl->proto_hdr.sas))
sbuf_printf(sbp, ", Not All Phys");
sbuf_printf(sbp, "\n");
if (addl->proto_data.sasdev_phys == NULL)
return;
for (i = 0;i < addl->proto_hdr.sas->base_hdr.num_phys;i++) {
phy = &addl->proto_data.sasdev_phys[i];
sbuf_printf(sbp, "%s: phy %d:", sesname, i);
if (ses_elm_sas_dev_phy_sata_dev(phy))
/* Spec says all other fields are specific values */
sbuf_printf(sbp, " SATA device\n");
else {
sbuf_printf(sbp, " SAS device type %d id %d\n",
ses_elm_sas_dev_phy_dev_type(phy), phy->phy_id);
sbuf_printf(sbp, "%s: phy %d: protocols:", sesname, i);
SES_PRINT_PORTS(phy->initiator_ports, "Initiator");
SES_PRINT_PORTS(phy->target_ports, "Target");
sbuf_printf(sbp, "\n");
}
sbuf_printf(sbp, "%s: phy %d: parent %jx addr %jx\n",
sesname, i,
(uintmax_t)scsi_8btou64(phy->parent_addr),
(uintmax_t)scsi_8btou64(phy->phy_addr));
}
}
#undef SES_PRINT_PORTS
/**
* \brief Report whether a given enclosure object is an expander.
*
* \param enc SES softc associated with object.
* \param obj Enclosure object to report for.
*
* \return 1 if true, 0 otherwise.
*/
static int
ses_obj_is_expander(enc_softc_t *enc, enc_element_t *obj)
{
return (obj->enctype == ELMTYP_SAS_EXP);
}
/**
* \brief Print the additional element status data for this object, for SAS
* type 1 objects. See SES2 r20 Sections 6.1.13.3.3 and 6.1.13.3.4.
*
* \param enc SES enclosure, needed for type identification.
* \param sesname SES device name associated with the object.
* \param sbp Sbuf to print to.
* \param obj The object to print the data for.
* \param periph_name Peripheral string associated with the object.
*/
static void
ses_print_addl_data_sas_type1(enc_softc_t *enc, char *sesname,
struct sbuf *sbp, enc_element_t *obj, char *periph_name)
{
int i, num_phys;
ses_element_t *elmpriv;
struct ses_addl_status *addl;
struct ses_elm_sas_expander_phy *exp_phy;
struct ses_elm_sas_port_phy *port_phy;
elmpriv = obj->elm_private;
addl = &(elmpriv->addl);
if (addl->proto_hdr.sas == NULL)
return;
sbuf_printf(sbp, "%s: %s: SAS ", sesname, periph_name);
if (ses_obj_is_expander(enc, obj)) {
num_phys = addl->proto_hdr.sas->base_hdr.num_phys;
sbuf_printf(sbp, "Expander: %d Phys", num_phys);
if (addl->proto_data.sasexp_phys == NULL)
return;
for (i = 0;i < num_phys;i++) {
exp_phy = &addl->proto_data.sasexp_phys[i];
sbuf_printf(sbp, "%s: phy %d: connector %d other %d\n",
sesname, i, exp_phy->connector_index,
exp_phy->other_index);
}
} else {
num_phys = addl->proto_hdr.sas->base_hdr.num_phys;
sbuf_printf(sbp, "Port: %d Phys", num_phys);
if (addl->proto_data.sasport_phys == NULL)
return;
for (i = 0;i < num_phys;i++) {
port_phy = &addl->proto_data.sasport_phys[i];
sbuf_printf(sbp,
"%s: phy %d: id %d connector %d other %d\n",
sesname, i, port_phy->phy_id,
port_phy->connector_index, port_phy->other_index);
sbuf_printf(sbp, "%s: phy %d: addr %jx\n", sesname, i,
(uintmax_t)scsi_8btou64(port_phy->phy_addr));
}
}
}
/**
* \brief Print the additional element status data for this object.
*
* \param enc SES softc associated with the object.
* \param obj The object to print the data for.
*/
static void
ses_print_addl_data(enc_softc_t *enc, enc_element_t *obj)
{
ses_element_t *elmpriv;
struct ses_addl_status *addl;
struct sbuf sesname, name, out;
elmpriv = obj->elm_private;
if (elmpriv == NULL)
return;
addl = &(elmpriv->addl);
if (addl->hdr == NULL)
return;
sbuf_new(&sesname, NULL, 16, SBUF_AUTOEXTEND);
sbuf_new(&name, NULL, 16, SBUF_AUTOEXTEND);
sbuf_new(&out, NULL, 512, SBUF_AUTOEXTEND);
ses_paths_iter(enc, obj, ses_elmdevname_callback, &name);
if (sbuf_len(&name) == 0)
sbuf_printf(&name, "(none)");
sbuf_finish(&name);
sbuf_printf(&sesname, "%s%d", enc->periph->periph_name,
enc->periph->unit_number);
sbuf_finish(&sesname);
if (elmpriv->descr != NULL)
sbuf_printf(&out, "%s: %s: Element descriptor: '%s'\n",
sbuf_data(&sesname), sbuf_data(&name), elmpriv->descr);
switch(ses_elm_addlstatus_proto(addl->hdr)) {
case SPSP_PROTO_SAS:
switch(ses_elm_sas_descr_type(addl->proto_hdr.sas)) {
case SES_SASOBJ_TYPE_SLOT:
ses_print_addl_data_sas_type0(sbuf_data(&sesname),
&out, obj, sbuf_data(&name));
break;
case SES_SASOBJ_TYPE_OTHER:
ses_print_addl_data_sas_type1(enc, sbuf_data(&sesname),
&out, obj, sbuf_data(&name));
break;
default:
break;
}
break;
case SPSP_PROTO_FC: /* stubbed for now */
break;
default:
break;
}
sbuf_finish(&out);
printf("%s", sbuf_data(&out));
sbuf_delete(&out);
sbuf_delete(&name);
sbuf_delete(&sesname);
}
/**
* \brief Update the softc with the additional element status data for this
* object, for SAS type 0 objects.
*
* \param enc SES softc to be updated.
* \param buf The additional element status response buffer.
* \param bufsiz Size of the response buffer.
* \param eip The EIP bit value.
* \param nobj Number of objects attached to the SES softc.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_get_elm_addlstatus_sas_type0(enc_softc_t *enc, enc_cache_t *enc_cache,
uint8_t *buf, int bufsiz, int eip, int nobj)
{
int err, offset, physz;
enc_element_t *obj;
ses_element_t *elmpriv;
struct ses_addl_status *addl;
err = offset = 0;
/* basic object setup */
obj = &(enc_cache->elm_map[nobj]);
elmpriv = obj->elm_private;
addl = &(elmpriv->addl);
addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset];
/* Don't assume this object has any phys */
bzero(&addl->proto_data, sizeof(addl->proto_data));
if (addl->proto_hdr.sas->base_hdr.num_phys == 0)
goto out;
/* Skip forward to the phy list */
if (eip)
offset += sizeof(struct ses_elm_sas_type0_eip_hdr);
else
offset += sizeof(struct ses_elm_sas_type0_base_hdr);
/* Make sure the phy list fits in the buffer */
physz = addl->proto_hdr.sas->base_hdr.num_phys;
physz *= sizeof(struct ses_elm_sas_device_phy);
if (physz > (bufsiz - offset + 4)) {
ENC_VLOG(enc, "Element %d Device Phy List Beyond End Of Buffer\n",
nobj);
err = EIO;
goto out;
}
/* Point to the phy list */
addl->proto_data.sasdev_phys =
(struct ses_elm_sas_device_phy *)&buf[offset];
out:
return (err);
}
/**
* \brief Update the softc with the additional element status data for this
* object, for SAS type 1 objects.
*
* \param enc SES softc to be updated.
* \param buf The additional element status response buffer.
* \param bufsiz Size of the response buffer.
* \param eip The EIP bit value.
* \param nobj Number of objects attached to the SES softc.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_get_elm_addlstatus_sas_type1(enc_softc_t *enc, enc_cache_t *enc_cache,
uint8_t *buf, int bufsiz, int eip, int nobj)
{
int err, offset, physz;
enc_element_t *obj;
ses_element_t *elmpriv;
struct ses_addl_status *addl;
err = offset = 0;
/* basic object setup */
obj = &(enc_cache->elm_map[nobj]);
elmpriv = obj->elm_private;
addl = &(elmpriv->addl);
addl->proto_hdr.sas = (union ses_elm_sas_hdr *)&buf[offset];
/* Don't assume this object has any phys */
bzero(&addl->proto_data, sizeof(addl->proto_data));
if (addl->proto_hdr.sas->base_hdr.num_phys == 0)
goto out;
/* Process expanders differently from other type1 cases */
if (ses_obj_is_expander(enc, obj)) {
offset += sizeof(struct ses_elm_sas_type1_expander_hdr);
physz = addl->proto_hdr.sas->base_hdr.num_phys *
sizeof(struct ses_elm_sas_expander_phy);
if (physz > (bufsiz - offset)) {
ENC_VLOG(enc, "Element %d: Expander Phy List Beyond "
"End Of Buffer\n", nobj);
err = EIO;
goto out;
}
addl->proto_data.sasexp_phys =
(struct ses_elm_sas_expander_phy *)&buf[offset];
} else {
offset += sizeof(struct ses_elm_sas_type1_nonexpander_hdr);
physz = addl->proto_hdr.sas->base_hdr.num_phys *
sizeof(struct ses_elm_sas_port_phy);
if (physz > (bufsiz - offset + 4)) {
ENC_VLOG(enc, "Element %d: Port Phy List Beyond End "
"Of Buffer\n", nobj);
err = EIO;
goto out;
}
addl->proto_data.sasport_phys =
(struct ses_elm_sas_port_phy *)&buf[offset];
}
out:
return (err);
}
/**
* \brief Update the softc with the additional element status data for this
* object, for SAS objects.
*
* \param enc SES softc to be updated.
* \param buf The additional element status response buffer.
* \param bufsiz Size of the response buffer.
* \param eip The EIP bit value.
* \param tidx Type index for this object.
* \param nobj Number of objects attached to the SES softc.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_get_elm_addlstatus_sas(enc_softc_t *enc, enc_cache_t *enc_cache,
uint8_t *buf, int bufsiz, int eip, int tidx,
int nobj)
{
int dtype, err;
ses_cache_t *ses_cache;
union ses_elm_sas_hdr *hdr;
/* Need to be able to read the descriptor type! */
if (bufsiz < sizeof(union ses_elm_sas_hdr)) {
err = EIO;
goto out;
}
ses_cache = enc_cache->private;
hdr = (union ses_elm_sas_hdr *)buf;
dtype = ses_elm_sas_descr_type(hdr);
switch(dtype) {
case SES_SASOBJ_TYPE_SLOT:
switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) {
case ELMTYP_DEVICE:
case ELMTYP_ARRAY_DEV:
break;
default:
ENC_VLOG(enc, "Element %d has Additional Status type 0, "
"invalid for SES element type 0x%x\n", nobj,
ses_cache->ses_types[tidx].hdr->etype_elm_type);
err = ENODEV;
goto out;
}
err = ses_get_elm_addlstatus_sas_type0(enc, enc_cache,
buf, bufsiz, eip,
nobj);
break;
case SES_SASOBJ_TYPE_OTHER:
switch(ses_cache->ses_types[tidx].hdr->etype_elm_type) {
case ELMTYP_SAS_EXP:
case ELMTYP_SCSI_INI:
case ELMTYP_SCSI_TGT:
case ELMTYP_ESCC:
break;
default:
ENC_VLOG(enc, "Element %d has Additional Status type 1, "
"invalid for SES element type 0x%x\n", nobj,
ses_cache->ses_types[tidx].hdr->etype_elm_type);
err = ENODEV;
goto out;
}
err = ses_get_elm_addlstatus_sas_type1(enc, enc_cache, buf,
bufsiz, eip, nobj);
break;
default:
ENC_VLOG(enc, "Element %d of type 0x%x has Additional Status "
"of unknown type 0x%x\n", nobj,
ses_cache->ses_types[tidx].hdr->etype_elm_type, dtype);
err = ENODEV;
break;
}
out:
return (err);
}
static void
ses_softc_invalidate(enc_softc_t *enc)
{
ses_softc_t *ses;
ses = enc->enc_private;
ses_terminate_control_requests(&ses->ses_requests, ENXIO);
}
static void
ses_softc_cleanup(enc_softc_t *enc)
{
ses_cache_free(enc, &enc->enc_cache);
ses_cache_free(enc, &enc->enc_daemon_cache);
ENC_FREE_AND_NULL(enc->enc_private);
ENC_FREE_AND_NULL(enc->enc_cache.private);
ENC_FREE_AND_NULL(enc->enc_daemon_cache.private);
}
static int
ses_init_enc(enc_softc_t *enc)
{
return (0);
}
static int
ses_get_enc_status(enc_softc_t *enc, int slpflag)
{
/* Automatically updated, caller checks enc_cache->encstat itself */
return (0);
}
static int
ses_set_enc_status(enc_softc_t *enc, uint8_t encstat, int slpflag)
{
ses_control_request_t req;
ses_softc_t *ses;
ses = enc->enc_private;
req.elm_idx = SES_SETSTATUS_ENC_IDX;
req.elm_stat.comstatus = encstat & 0xf;
TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links);
enc_update_request(enc, SES_PROCESS_CONTROL_REQS);
cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0);
return (req.result);
}
static int
ses_get_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag)
{
unsigned int i = elms->elm_idx;
memcpy(elms->cstat, &enc->enc_cache.elm_map[i].encstat, 4);
return (0);
}
static int
ses_set_elm_status(enc_softc_t *enc, encioc_elm_status_t *elms, int slpflag)
{
ses_control_request_t req;
ses_softc_t *ses;
/* If this is clear, we don't do diddly. */
if ((elms->cstat[0] & SESCTL_CSEL) == 0)
return (0);
ses = enc->enc_private;
req.elm_idx = elms->elm_idx;
memcpy(&req.elm_stat, elms->cstat, sizeof(req.elm_stat));
TAILQ_INSERT_TAIL(&ses->ses_requests, &req, links);
enc_update_request(enc, SES_PROCESS_CONTROL_REQS);
cam_periph_sleep(enc->periph, &req, PUSER, "encstat", 0);
return (req.result);
}
static int
ses_get_elm_desc(enc_softc_t *enc, encioc_elm_desc_t *elmd)
{
int i = (int)elmd->elm_idx;
ses_element_t *elmpriv;
/* Assume caller has already checked obj_id validity */
elmpriv = enc->enc_cache.elm_map[i].elm_private;
/* object might not have a descriptor */
if (elmpriv == NULL || elmpriv->descr == NULL) {
elmd->elm_desc_len = 0;
return (0);
}
if (elmd->elm_desc_len > elmpriv->descr_len)
elmd->elm_desc_len = elmpriv->descr_len;
copyout(elmpriv->descr, elmd->elm_desc_str, elmd->elm_desc_len);
return (0);
}
/**
* \brief Respond to ENCIOC_GETELMDEVNAME, providing a device name for the
* given object id if one is available.
*
* \param enc SES softc to examine.
* \param objdn ioctl structure to read/write device name info.
*
* \return 0 on success, errno otherwise.
*/
static int
ses_get_elm_devnames(enc_softc_t *enc, encioc_elm_devnames_t *elmdn)
{
struct sbuf sb;
int len;
len = elmdn->elm_names_size;
if (len < 0)
return (EINVAL);
sbuf_new(&sb, elmdn->elm_devnames, len, 0);
cam_periph_unlock(enc->periph);
ses_paths_iter(enc, &enc->enc_cache.elm_map[elmdn->elm_idx],
ses_elmdevname_callback, &sb);
sbuf_finish(&sb);
elmdn->elm_names_len = sbuf_len(&sb);
cam_periph_lock(enc->periph);
return (elmdn->elm_names_len > 0 ? 0 : ENODEV);
}
/**
* \brief Send a string to the primary subenclosure using the String Out
* SES diagnostic page.
*
* \param enc SES enclosure to run the command on.
* \param sstr SES string structure to operate on
* \param ioc Ioctl being performed
*
* \return 0 on success, errno otherwise.
*/
static int
ses_handle_string(enc_softc_t *enc, encioc_string_t *sstr, int ioc)
{
int amt, payload, ret;
char cdb[6];
uint8_t *buf;
/* Implement SES2r20 6.1.6 */
if (sstr->bufsiz > 0xffff)
return (EINVAL); /* buffer size too large */
if (ioc == ENCIOC_SETSTRING) {
payload = sstr->bufsiz + 4; /* header for SEND DIAGNOSTIC */
amt = 0 - payload;
buf = ENC_MALLOC(payload);
if (buf == NULL)
return ENOMEM;
ses_page_cdb(cdb, payload, 0, CAM_DIR_OUT);
/* Construct the page request */
buf[0] = SesStringOut;
buf[1] = 0;
buf[2] = sstr->bufsiz >> 8;
buf[3] = sstr->bufsiz & 0xff;
memcpy(&buf[4], sstr->buf, sstr->bufsiz);
} else if (ioc == ENCIOC_GETSTRING) {
payload = sstr->bufsiz;
amt = payload;
ses_page_cdb(cdb, payload, SesStringIn, CAM_DIR_IN);
buf = sstr->buf;
} else
return EINVAL;
ret = enc_runcmd(enc, cdb, 6, buf, &amt);
if (ioc == ENCIOC_SETSTRING)
ENC_FREE(buf);
return ret;
}
/**
* \invariant Called with cam_periph mutex held.
*/
static void
ses_poll_status(enc_softc_t *enc)
{
ses_softc_t *ses;
ses = enc->enc_private;
enc_update_request(enc, SES_UPDATE_GETSTATUS);
if (ses->ses_flags & SES_FLAG_ADDLSTATUS)
enc_update_request(enc, SES_UPDATE_GETELMADDLSTATUS);
}
/**
* \brief Notification received when CAM detects a new device in the
* SCSI domain in which this SEP resides.
*
* \param enc SES enclosure instance.
*/
static void
ses_device_found(enc_softc_t *enc)
{
ses_poll_status(enc);
enc_update_request(enc, SES_PUBLISH_PHYSPATHS);
}
static struct enc_vec ses_enc_vec =
{
.softc_invalidate = ses_softc_invalidate,
.softc_cleanup = ses_softc_cleanup,
.init_enc = ses_init_enc,
.get_enc_status = ses_get_enc_status,
.set_enc_status = ses_set_enc_status,
.get_elm_status = ses_get_elm_status,
.set_elm_status = ses_set_elm_status,
.get_elm_desc = ses_get_elm_desc,
.get_elm_devnames = ses_get_elm_devnames,
.handle_string = ses_handle_string,
.device_found = ses_device_found,
.poll_status = ses_poll_status
};
/**
* \brief Initialize a new SES instance.
*
* \param enc SES softc structure to set up the instance in.
* \param doinit Do the initialization (see main driver).
*
* \return 0 on success, errno otherwise.
*/
int
ses_softc_init(enc_softc_t *enc)
{
ses_softc_t *ses_softc;
CAM_DEBUG(enc->periph->path, CAM_DEBUG_SUBTRACE,
("entering enc_softc_init(%p)\n", enc));
enc->enc_vec = ses_enc_vec;
enc->enc_fsm_states = enc_fsm_states;
if (enc->enc_private == NULL)
enc->enc_private = ENC_MALLOCZ(sizeof(ses_softc_t));
if (enc->enc_cache.private == NULL)
enc->enc_cache.private = ENC_MALLOCZ(sizeof(ses_cache_t));
if (enc->enc_daemon_cache.private == NULL)
enc->enc_daemon_cache.private =
ENC_MALLOCZ(sizeof(ses_cache_t));
if (enc->enc_private == NULL
|| enc->enc_cache.private == NULL
|| enc->enc_daemon_cache.private == NULL) {
ENC_FREE_AND_NULL(enc->enc_private);
ENC_FREE_AND_NULL(enc->enc_cache.private);
ENC_FREE_AND_NULL(enc->enc_daemon_cache.private);
return (ENOMEM);
}
ses_softc = enc->enc_private;
TAILQ_INIT(&ses_softc->ses_requests);
TAILQ_INIT(&ses_softc->ses_pending_requests);
enc_update_request(enc, SES_UPDATE_PAGES);
// XXX: Move this to the FSM so it doesn't hang init
if (0) (void) ses_set_timed_completion(enc, 1);
return (0);
}
Reference in New Issue View Git Blame Copy Permalink