freebsd-dev/sys/arm/at91/at91rm92reg.h
Warner Losh f54a134552 MFP4:
GC and fix definitions.

# some of this may have been done by cognet
2006-03-18 01:38:25 +00:00

345 lines
14 KiB
C

/*-
* Copyright (c) 2005 Olivier Houchard. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $FreeBSD$ */
#ifndef AT91RM92REG_H_
#define AT91RM92REG_H_
/*
* Memory map, from datasheet :
* 0x00000000 - 0x0ffffffff : Internal Memories
* 0x10000000 - 0x1ffffffff : Chip Select 0
* 0x20000000 - 0x2ffffffff : Chip Select 1
* 0x30000000 - 0x3ffffffff : Chip Select 2
* 0x40000000 - 0x4ffffffff : Chip Select 3
* 0x50000000 - 0x5ffffffff : Chip Select 4
* 0x60000000 - 0x6ffffffff : Chip Select 5
* 0x70000000 - 0x7ffffffff : Chip Select 6
* 0x80000000 - 0x8ffffffff : Chip Select 7
* 0x90000000 - 0xeffffffff : Undefined (Abort)
* 0xf0000000 - 0xfffffffff : Peripherals
*/
#define AT91RM92_BASE 0xf0000000
/* Usart */
#define AT91RM92_USART0_BASE 0xffc0000
#define AT91RM92_USART0_PDC 0xffc0100
#define AT91RM92_USART1_BASE 0xffc4000
#define AT91RM92_USART1_PDC 0xffc4100
#define AT91RM92_USART2_BASE 0xffc8000
#define AT91RM92_USART2_PDC 0xffc8100
#define AT91RM92_USART3_BASE 0xffcc000
#define AT91RM92_USART3_PDC 0xffcc100
#define AT91RM92_USART_SIZE 0x4000
/* System Registers */
#define AT91RM92_SYS_BASE 0xffff000
#define AT91RM92_SYS_SIZE 0x1000
/* Interrupt Controller */
#define IC_SMR (0) /* Source mode register */
#define IC_SVR (128) /* Source vector register */
#define IC_IVR (256) /* IRQ vector register */
#define IC_FVR (260) /* FIQ vector register */
#define IC_ISR (264) /* Interrupt status register */
#define IC_IPR (268) /* Interrupt pending register */
#define IC_IMR (272) /* Interrupt status register */
#define IC_CISR (276) /* Core interrupt status register */
#define IC_IECR (288) /* Interrupt enable command register */
#define IC_IDCR (292) /* Interrupt disable command register */
#define IC_ICCR (296) /* Interrupt clear command register */
#define IC_ISCR (300) /* Interrupt set command register */
#define IC_EOICR (304) /* End of interrupt command register */
#define IC_SPU (308) /* Spurious vector register */
#define IC_DCR (312) /* Debug control register */
#define IC_FFER (320) /* Fast forcing enable register */
#define IC_FFDR (324) /* Fast forcing disable register */
#define IC_FFSR (328) /* Fast forcing status register */
/* DBGU */
#define DBGU 0x200
#define DBGU_SIZE 0x200
#define DBGU_C1R (0x200 + 64) /* Chip ID1 Register */
#define DBGU_C2R (0x200 + 68) /* Chip ID2 Register */
#define DBGU_FNTR (0x200 + 72) /* Force NTRST Register */
#define PIOA_PER (0x400) /* PIO Enable Register */
#define PIOA_PDR (0x400 + 4) /* PIO Disable Register */
#define PIOA_PSR (0x400 + 8) /* PIO status register */
#define PIOA_OER (0x400 + 16) /* Output enable register */
#define PIOA_ODR (0x400 + 20) /* Output disable register */
#define PIOA_OSR (0x400 + 24) /* Output status register */
#define PIOA_IFER (0x400 + 32) /* Input filter enable register */
#define PIOA_IFDR (0x400 + 36) /* Input filter disable register */
#define PIOA_IFSR (0x400 + 40) /* Input filter status register */
#define PIOA_SODR (0x400 + 48) /* Set output data register */
#define PIOA_CODR (0x400 + 52) /* Clear output data register */
#define PIOA_ODSR (0x400 + 56) /* Output data status register */
#define PIOA_PDSR (0x400 + 60) /* Pin data status register */
#define PIOA_IER (0x400 + 64) /* Interrupt enable register */
#define PIOA_IDR (0x400 + 68) /* Interrupt disable register */
#define PIOA_IMR (0x400 + 72) /* Interrupt mask register */
#define PIOA_ISR (0x400 + 76) /* Interrupt status register */
#define PIOA_MDER (0x400 + 80) /* Multi driver enable register */
#define PIOA_MDDR (0x400 + 84) /* Multi driver disable register */
#define PIOA_MDSR (0x400 + 88) /* Multi driver status register */
#define PIOA_PPUDR (0x400 + 96) /* Pull-up disable register */
#define PIOA_PPUER (0x400 + 100) /* Pull-up enable register */
#define PIOA_PPUSR (0x400 + 104) /* Pad pull-up status register */
#define PIOA_ASR (0x400 + 112) /* Select A register */
#define PIOA_BSR (0x400 + 116) /* Select B register */
#define PIOA_ABSR (0x400 + 120) /* AB Select status register */
#define PIOA_OWER (0x400 + 160) /* Output Write enable register */
#define PIOA_OWDR (0x400 + 164) /* Output write disable register */
#define PIOA_OWSR (0x400 + 168) /* Output write status register */
#define PIOB_PER (0x400) /* PIO Enable Register */
#define PIOB_PDR (0x600 + 4) /* PIO Disable Register */
#define PIOB_PSR (0x600 + 8) /* PIO status register */
#define PIOB_OER (0x600 + 16) /* Output enable register */
#define PIOB_ODR (0x600 + 20) /* Output disable register */
#define PIOB_OSR (0x600 + 24) /* Output status register */
#define PIOB_IFER (0x600 + 32) /* Input filter enable register */
#define PIOB_IFDR (0x600 + 36) /* Input filter disable register */
#define PIOB_IFSR (0x600 + 40) /* Input filter status register */
#define PIOB_SODR (0x600 + 48) /* Set output data register */
#define PIOB_CODR (0x600 + 52) /* Clear output data register */
#define PIOB_ODSR (0x600 + 56) /* Output data status register */
#define PIOB_PDSR (0x600 + 60) /* Pin data status register */
#define PIOB_IER (0x600 + 64) /* Interrupt enable register */
#define PIOB_IDR (0x600 + 68) /* Interrupt disable register */
#define PIOB_IMR (0x600 + 72) /* Interrupt mask register */
#define PIOB_ISR (0x600 + 76) /* Interrupt status register */
#define PIOB_MDER (0x600 + 80) /* Multi driver enable register */
#define PIOB_MDDR (0x600 + 84) /* Multi driver disable register */
#define PIOB_MDSR (0x600 + 88) /* Multi driver status register */
#define PIOB_PPUDR (0x600 + 96) /* Pull-up disable register */
#define PIOB_PPUER (0x600 + 100) /* Pull-up enable register */
#define PIOB_PPUSR (0x600 + 104) /* Pad pull-up status register */
#define PIOB_ASR (0x600 + 112) /* Select A register */
#define PIOB_BSR (0x600 + 116) /* Select B register */
#define PIOB_ABSR (0x600 + 120) /* AB Select status register */
#define PIOB_OWER (0x600 + 160) /* Output Write enable register */
#define PIOB_OWDR (0x600 + 164) /* Output write disable register */
#define PIOB_OWSR (0x600 + 168) /* Output write status register */
#define PIOC_PER (0x800) /* PIO Enable Register */
#define PIOC_PDR (0x800 + 4) /* PIO Disable Register */
#define PIOC_PSR (0x800 + 8) /* PIO status register */
#define PIOC_OER (0x800 + 16) /* Output enable register */
#define PIOC_ODR (0x800 + 20) /* Output disable register */
#define PIOC_OSR (0x800 + 24) /* Output status register */
#define PIOC_IFER (0x800 + 32) /* Input filter enable register */
#define PIOC_IFDR (0x800 + 36) /* Input filter disable register */
#define PIOC_IFSR (0x800 + 40) /* Input filter status register */
#define PIOC_SODR (0x800 + 48) /* Set output data register */
#define PIOC_CODR (0x800 + 52) /* Clear output data register */
#define PIOC_ODSR (0x800 + 56) /* Output data status register */
#define PIOC_PDSR (0x800 + 60) /* Pin data status register */
#define PIOC_IER (0x800 + 64) /* Interrupt enable register */
#define PIOC_IDR (0x800 + 68) /* Interrupt disable register */
#define PIOC_IMR (0x800 + 72) /* Interrupt mask register */
#define PIOC_ISR (0x800 + 76) /* Interrupt status register */
#define PIOC_MDER (0x800 + 80) /* Multi driver enable register */
#define PIOC_MDDR (0x800 + 84) /* Multi driver disable register */
#define PIOC_MDSR (0x800 + 88) /* Multi driver status register */
#define PIOC_PPUDR (0x800 + 96) /* Pull-up disable register */
#define PIOC_PPUER (0x800 + 100) /* Pull-up enable register */
#define PIOC_PPUSR (0x800 + 104) /* Pad pull-up status register */
#define PIOC_ASR (0x800 + 112) /* Select A register */
#define PIOC_BSR (0x800 + 116) /* Select B register */
#define PIOC_ABSR (0x800 + 120) /* AB Select status register */
#define PIOC_OWER (0x800 + 160) /* Output Write enable register */
#define PIOC_OWDR (0x800 + 164) /* Output write disable register */
#define PIOC_OWSR (0x800 + 168) /* Output write status register */
#define PIOD_PER (0xa00) /* PIO Enable Register */
#define PIOD_PDR (0xa00 + 4) /* PIO Disable Register */
#define PIOD_PSR (0xa00 + 8) /* PIO status register */
#define PIOD_OER (0xa00 + 16) /* Output enable register */
#define PIOD_ODR (0xa00 + 20) /* Output disable register */
#define PIOD_OSR (0xa00 + 24) /* Output status register */
#define PIOD_IFER (0xa00 + 32) /* Input filter enable register */
#define PIOD_IFDR (0xa00 + 36) /* Input filter disable register */
#define PIOD_IFSR (0xa00 + 40) /* Input filter status register */
#define PIOD_SODR (0xa00 + 48) /* Set output data register */
#define PIOD_CODR (0xa00 + 52) /* Clear output data register */
#define PIOD_ODSR (0xa00 + 56) /* Output data status register */
#define PIOD_PDSR (0xa00 + 60) /* Pin data status register */
#define PIOD_IER (0xa00 + 64) /* Interrupt enable register */
#define PIOD_IDR (0xa00 + 68) /* Interrupt disable register */
#define PIOD_IMR (0xa00 + 72) /* Interrupt mask register */
#define PIOD_ISR (0xa00 + 76) /* Interrupt status register */
#define PIOD_MDER (0xa00 + 80) /* Multi driver enable register */
#define PIOD_MDDR (0xa00 + 84) /* Multi driver disable register */
#define PIOD_MDSR (0xa00 + 88) /* Multi driver status register */
#define PIOD_PPUDR (0xa00 + 96) /* Pull-up disable register */
#define PIOD_PPUER (0xa00 + 100) /* Pull-up enable register */
#define PIOD_PPUSR (0xa00 + 104) /* Pad pull-up status register */
#define PIOD_ASR (0xa00 + 112) /* Select A register */
#define PIOD_BSR (0xa00 + 116) /* Select B register */
#define PIOD_ABSR (0xa00 + 120) /* AB Select status register */
#define PIOD_OWER (0xa00 + 160) /* Output Write enable register */
#define PIOD_OWDR (0xa00 + 164) /* Output write disable register */
#define PIOD_OWSR (0xa00 + 168) /* Output write status register */
/*
* PIO
*/
#define AT91RM92_PIOA_BASE 0xffff400
#define AT91RM92_PIO_SIZE 0x200
#define AT91RM92_PIOB_BASE 0xffff600
#define AT91RM92_PIOC_BASE 0xffff800
#define AT91RM92_PIOD_BASE 0xffffa00
/*
* PMC
*/
#define AT91RM92_PMC_BASE 0xffffc00
#define AT91RM92_PMC_SIZE 0x100
/* IRQs : */
/*
* 0: AIC
* 1: System peripheral (System timer, RTC, DBGU)
* 2: PIO Controller A
* 3: PIO Controller B
* 4: PIO Controller C
* 5: PIO Controller D
* 6: USART 0
* 7: USART 1
* 8: USART 2
* 9: USART 3
* 10: MMC Interface
* 11: USB device port
* 12: Two-wirte interface
* 13: SPI
* 14: SSC
* 15: SSC
* 16: SSC
* 17: Timer Counter 0
* 18: Timer Counter 1
* 19: Timer Counter 2
* 20: Timer Counter 3
* 21: Timer Counter 4
* 22: Timer Counter 6
* 23: USB Host port
* 24: Ethernet
* 25: AIC
* 26: AIC
* 27: AIC
* 28: AIC
* 29: AIC
* 30: AIC
* 31: AIC
*/
#define AT91RM92_IRQ_SYSTEM 1
#define AT91RM92_IRQ_PIOA 2
#define AT91RM92_IRQ_PIOB 3
#define AT91RM92_IRQ_PIOC 4
#define AT91RM92_IRQ_PIOD 5
#define AT91RM92_IRQ_USART0 6
#define AT91RM92_IRQ_USART1 7
#define AT91RM92_IRQ_USART2 8
#define AT91RM92_IRQ_USART3 9
#define AT91RM92_IRQ_MCI 10
#define AT91RM92_IRQ_UDP 11
#define AT91RM92_IRQ_TWI 12
#define AT91RM92_IRQ_SPI 13
#define AT91RM92_IRQ_SSC0 14
#define AT91RM92_IRQ_SSC1 15
#define AT91RM92_IRQ_SSC2 16
#define AT91RM92_IRQ_TC0 17
#define AT91RM92_IRQ_TC1 18
#define AT91RM92_IRQ_TC2 19
#define AT91RM92_IRQ_TC3 20
#define AT91RM92_IRQ_TC4 21
#define AT91RM92_IRQ_TC5 22
#define AT91RM92_IRQ_UHP 23
#define AT91RM92_IRQ_EMAC 24
#define AT91RM92_IRQ_AIC_BASE 25
/* Timer */
#define AT91RM92_AIC_BASE 0xffff000
#define AT91RM92_AIC_SIZE 0x200
#define AT91RM92_DBGU_BASE 0xffff200
#define AT91RM92_DBGU_SIZE 0x200
#define AT91RM92_RTC_BASE 0xffffe00
#define AT91RM92_RTC_SIZE 0x100
#define AT91RM92_MC_BASE 0xfffff00
#define AT91RM92_MC_SIZE 0x100
#define AT91RM92_ST_BASE 0xffffd00
#define AT91RM92_ST_SIZE 0x100
#define AT91RM92_SPI_BASE 0xffe0000
#define AT91RM92_SPI_SIZE 0x4000
#define AT91RM92_SPI_PDC 0xffe0100
#define AT91RM92_SSC0_BASE 0xffd0000
#define AT91RM92_SSC0_PDC 0xffd0100
#define AT91RM92_SSC1_BASE 0xffd4000
#define AT91RM92_SSC1_PDC 0xffd4100
#define AT91RM92_SSC2_BASE 0xffd8000
#define AT91RM92_SSC2_PDC 0xffd8100
#define AT91RM92_SSC_SIZE 0x4000
#define AT91RM92_EMAC_BASE 0xffbc000
#define AT91RM92_EMAC_SIZE 0x4000
#define AT91RM92_TWI_BASE 0xffb8000
#define AT91RM92_TWI_SIZE 0x4000
#define AT91RM92_MCI_BASE 0xffb4000
#define AT91RM92_MCI_PDC 0xffb4100
#define AT91RM92_MCI_SIZE 0x4000
#define AT91RM92_UDP_BASE 0xffb0000
#define AT91RM92_UDP_SIZE 0x4000
#define AT91RM92_TC0_BASE 0xffa0000
#define AT91RM92_TC_SIZE 0x4000
#define AT91RM92_TC0C0_BASE 0xffa0000
#define AT91RM92_TC0C1_BASE 0xffa0040
#define AT91RM92_TC0C2_BASE 0xffa0080
#define AT91RM92_TC1_BASE 0xffa4000
#define AT91RM92_TC1C0_BASE 0xffa4000
#define AT91RM92_TC1C1_BASE 0xffa4040
#define AT91RM92_TC1C2_BASE 0xffa4080
#define AT91RM92_OHCI_BASE 0x00300000
#define AT91RM92_OHCI_SIZE 0x00100000
#define AT91C_MASTER_CLOCK 60000000
#endif /* AT91RM92REG_H_ */