freebsd-dev/etc/MAKEDEV
Bruce Evans 8fdb202d85 Support more than 32 sio unit numbers. The maximum unit number is now
(65536 * 32 - 1), but MAKEDEV only supports up to (32 * 32 -1).  Device
names use the unit number in base 32 for all "digits".

This required fixing an old bug in MAKEDEV:ttyminor().  Its arg was the
global $unit instead of $1.

Reminded by:	Valentin K. Ponomarenko <valka@krog.ukrtel.net>
MFC-after:	1 week
2002-03-31 09:15:43 +00:00

1772 lines
38 KiB
Bash

#!/bin/sh -
#
# Copyright (c) 1990 The Regents of the University of California.
# All rights reserved.
#
# Written and contributed by W. Jolitz 12/90
#
# Redistribution and use in source and binary forms are permitted provided
# that: (1) source distributions retain this entire copyright notice and
# comment, and (2) distributions including binaries display the following
# acknowledgement: ``This product includes software developed by the
# University of California, Berkeley and its contributors'' in the
# documentation or other materials provided with the distribution and in
# all advertising materials mentioning features or use of this software.
# Neither the name of the University nor the names of its contributors may
# be used to endorse or promote products derived from this software without
# specific prior written permission.
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
# $FreeBSD$
#
# Device "make" file. Valid arguments:
# all makes all known devices, standard number of units (or close)
# std standard devices
# jail suitable for a jail(8)
# local configuration specific devices
# mach-4 mach4&lites+devices for Mach's XFree86 distribution
# (see http://www.cs.hut.fi/lites.html for more info on LITES)
#
# Tapes:
# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
# sa* SCSI Sequential Access Devices
#
# Disks:
# aac* Adaptec FSA RAID controllers
# aacd* Adaptec FSA RAID
# acd* ATAPI CD-ROM disks
# amrd* AMI MegaRAID
# cd* SCSI CD-ROM disks
# da* SCSI Direct Access Devices
# fd* floppy disk drives (3 1/2", 5 1/4")
# fla* M-Systems DiskOnChip
# idad* Compaq Smart-2 RAID arrays
# matcd* Matsushita (Panasonic) CD-ROM disks
# mcd* Mitsumi CD-ROM disks
# md* Memory (or malloc) disk
# mlx* Mylex DAC960 RAID controllers
# mlxd* Mylex DAC960 RAID disk volumes
# mly* Mylex RAID controllers (newer models)
# scd* Sony CD-ROM disks
# wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...)
# wfd* IDE floppy disk drives (LS-120)
#
# Console ports:
# vty* virtual console devices for syscons/pcvt/codrv
#
# Pointing devices:
# mse* Logitech and ATI Inport bus mouse
# psm* PS/2 mouse
# jogdial Sony VAIO jog dial
# sysmouse Mousesystems mouse emulator for syscons
#
# Time devices:
# refclock-* serial ports used by xntpd parse refclocks
#
# Terminal ports:
# tty* general purpose serial ports
# cua* dialout serial ports
# ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
# cuaA* Specialix SI/XIO dialout ports
# ttyDXX Digiboard Xi - 16 dialin ports (dgb)
# cuaDXX Digiboard Xi - 16 dialout ports (dgb)
# ttyDX.X Digiboards (work in progress) - 16 dialin ports (digi)
# cuaDX.X Digiboards (work in progress) - 16 dialout ports (digi)
# ttyM* Digiboard Xem - 16 dialin ports (dgm)
# cuaM* Digiboard Xem - 16 dialout ports (dgm)
# ttyR* Rocketport dialin ports
# cuaR* Rocketport dialout ports
#
# Pseudo terminals:
# pty* set of 32 master and slave pseudo terminals
# vty* virtual terminals using syscons/pcvt/codrv console
#
# Parallel port:
# lpt* Printer
# ppi* Parallel port i/o
# pps* Pulse per second timing interface
# pcfclock* Parallel time sync interface
#
# I2C and SMBus:
# iic* I2C devices
# smb* SMBUS devices
#
# USB devices:
# usb* USB bus control device
# ugen* generic USB device
# uhid* Human Interface Device (HID)
# ulpt* printer
# umodem* modems
# ums* mouse
# urio* Diamond Rio 500
# uscanner* USB scanners
# usio* USB serial devices
#
# SCSI devices (other than CD-ROM, tape and disk):
# ch* SCSI Media-Changer (juke box) driver
# pt* Processor Type (HP scanner, as one example)
# pass* CAM Passthrough device
# ses* SES (SCSI Environmental Services) and
# SAF-TE (Scsi Accessable Fault-Tolerant Enclosures) device
#
# PC-CARD (previously called PCMCIA) support
# card* PC-CARD slots
#
# ISDN devices:
# i4b isdnd call control device
# i4bctl debugging control device
# i4btrc* trace data interface(s), one per passive card
# i4btel* telephony interface(s)
# i4bteld* telephony dialout interface(s)
# i4brbch* raw b channel access device(s)
#
# Special purpose devices:
# acpi Advanced Configuration and Power Interface
# apm Advanced Power Management BIOS
# apmctl APM BIOS control device
# bpf* packet filter
# speaker pc speaker
# tw* xten power controller
# snd* various sound cards
# pcaudio PCM audio driver
# socksys iBCS2 socket system driver
# vat VAT compatibility audio driver (requires snd*)
# gsc Genius GS-4500 hand scanner
# joy pc joystick
# tun* Tunneling IP device
# tap* Ethernet Tunneling device
# snp* tty snoop devices
# spigot Video Spigot video acquisition card
# ctx* Cortex-I video acquisition card
# meteor* Matrox Meteor video acquisition card (pci)
# bktr* Bt848 based video acquisition card (pci)
# labpc* National Instrument's Lab-PC and LAB-PC+
# perfmon CPU performance-monitoring counters
# pci PCI configuration-space access from user mode
# ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth)
# kbd keyboard devices
# 3dfx* 3dfx voodoo device for glide (tdfx) (/dev/3dfx,3dfxN,voodoo)
# agpgart AGP interface
# cfs* Coda Distributed Filesystem
# nsmb* SMB/CIFS protocol interface
#
if [ -n "$MAKEDEVPATH" ]; then
PATH="$MAKEDEVPATH"
else
PATH=/sbin:/bin
fi
umask 77
# Usage: die exitcode msg
die() {
echo $2
exit $1
}
# Convert integer to partition name
dkitop() {
local p
case $1 in
0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
*) p="?";;
esac
echo $p
}
# Convert integer to slice name
dkitos() {
local s
case $1 in
0) s="";;
1) s="";;
*) s=s$(($1-1));;
esac
echo $s
}
# Convert disk (type, unit, slice, partition) to minor number
dkminor()
{
echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
}
# Print the hexadecimal representation of a decimal value from 0 to 15.
hexdigit() {
local d
if [ $1 -lt 10 ]; then
d=$1
else
case $1 in
10) d=a;; 11) d=b;; 12) d=c;; 13) d=d;; 14) d=e;; 15) d=f;;
*) d="?";;
esac
fi
echo $d
}
# Print the hexadecimal representation of an arbitrary decimal value.
hexprint() {
local dig
local str
local val
val=$1
str=''
dig=`hexdigit $(($val & 15))`
str=$dig$str
val=$(($val >> 4))
while [ $val -gt 0 ]; do
dig=`hexdigit $(($val & 15))`
str=$dig$str
val=$(($val >> 4))
done
echo $str
}
# Override mknod(2) to add extra handling to it.
mknod=/sbin/mknod
for i in `IFS=':'; echo $PATH`; do
if [ -x "${i}/mknod" ]; then
mknod="${i}/mknod"
break
fi
done
mknod() {
rm -f "$1" || exit 1
case $# in
4) "$mknod" "$@" root:wheel || die 2 "$mknod $@ failed";;
5) "$mknod" "$@" || die 2 "$mknod $@ failed";;
*) die 2 "bad node: mknod $@";;
esac
}
# Convert tape (ctrl, unit, mode, access) to minor number
saminor()
{
echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4))
}
# Convert the last character of a tty name to a minor number.
ttyminor()
{
case $1 in
[0-9]) m=$1;;
a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
v) m=31;;
*) m="?";;
esac
echo $m
}
# Convert a unit number to a minor number.
unit2minor()
{
echo $(((($1 >> 8) << 16) | ($1 % 256)))
}
# Zero-pad a value to the appropriate minimum length.
zeropad() {
local min
local val
min=$1
val=$2
while [ ${#val} -lt $min ]; do
val=0$val
done
echo $val
}
# Raw partition for disks
dkrawpart=2
# Compatibility slice for disks
dkcompatslice=0
# Raw slice for disks
dkrawslice=1
# Standard umasks
disk_umask=037 # allow group operator to read disks
tape_umask=017 # allow group operator to read/write tapes
for i in $*; do
case $i in
all)
sh $0 std # standard
sh $0 fd0 fd1 # floppy disk
sh $0 da0 da1 da2 da3 # SCSI disk
sh $0 ata # ATA control
sh $0 ad0 ad1 ad2 ad3 # ATA disk
sh $0 ar0 ar1 # ATA RAID disk
sh $0 acd0 acd0t0 afd0 ast0 # ATAPI devices
sh $0 wd0 wd1 wd2 wd3 # OLD disk
sh $0 wcd0 wfd0 wst0 # OLD ATAPI devs
sh $0 cd0 matcd0 mcd0 scd0 # cdrom
sh $0 sa0 wt0 # tape
sh $0 vty12 # virtual tty
sh $0 cuaa0 cuaa1 cuaa2 cuaa3 # serial tty
sh $0 pty0 # pseudo tty
sh $0 ttyd0 ttyd1 ttyd2 ttyd3 # serial tty
sh $0 kbd0 kbd1 # keyboard
sh $0 mse0 psm0 jogdial sysmouse # mouse
sh $0 pcaudio speaker # noise
sh $0 lpt0 lpt1 lpt2 # printer
sh $0 ppi0 ppi1 ppi2 # parallel port
sh $0 iic0 iic1 # I2C device
sh $0 smb0 smb1 # SMBus device
sh $0 usb usb0 uhid0 ums0 ulpt0 ugen0 # USB devices
sh $0 urio0 uscanner0 umodem0 # USB devices too
sh $0 bpf0 bpf1 bpf2 bpf3 # network
sh $0 ipl tun0 tun1 tun2 tun3 # network
sh $0 tap0 tap1 tap2 tap3 # network
sh $0 ch0 perfmon tw0 # miscellaneous
sh $0 acpi # ACPI
sh $0 apm apmctl card0 card1 card2 card3 # laptop
sh $0 pass4 xpt2 # CAM
sh $0 i4b i4bctl i4btrc0 i4btrc1 # ISDN
sh $0 i4btel0 i4btel1 i4bteld0 i4bteld1 # ISDN
sh $0 i4brbch0 i4brbch1 # ISDN
sh $0 agpgart # AGP
sh $0 nsmb0 # SMB/CIFS
;;
# a much restricted set of the above, to save precious i-nodes on the
# fixit floppy
fixit)
sh $0 std # standard
sh $0 fd0 # floppy disk
sh $0 da0 # SCSI disk
sh $0 ad0 # ATA disk
sh $0 acd0 afd0 ast0 # ATAPI devices
sh $0 wd0 # OLD disk
sh $0 wcd0 wfd0 wst0 # OLD ATAPI devs
sh $0 cd0 # cdrom
sh $0 sa0 # tape
sh $0 vty2 # virtual tty
sh $0 cuaa0 # serial tty
sh $0 pty0 # pseudo tty
sh $0 ttyd0 # serial tty
sh $0 kbd0 # keyboard
sh $0 mse0 psm0 jogdial sysmouse # mouse
sh $0 lpt0 # printer
sh $0 ppi0 # parallel port
sh $0 iic0 # I2C device
sh $0 smb0 # SMBus device
sh $0 ums0 # USB devices
sh $0 tun0 # network
sh $0 tap0 # network
sh $0 ch0 # miscellaneous
sh $0 acpi # ACPI
sh $0 apm apmctl card0 # laptop
sh $0 pass1 xpt1 # CAM
sh $0 i4b i4bctl i4btrc0 i4btrc1 # ISDN
sh $0 i4btel0 i4bteld0 # ISDN
sh $0 i4brbch0 # ISDN
rm -f fd/[1-9]?
;;
std)
mknod console c 0 0; chmod 600 console
mknod kmem c 2 1 root:kmem; chmod 640 kmem
mknod mem c 2 0 root:kmem; chmod 640 mem
mknod null c 2 2; chmod 666 null
mknod random c 2 3; chmod 666 random
ln -f random urandom
mknod zero c 2 12; chmod 666 zero
mknod io c 2 14; chmod 600 io
mknod tty c 1 0; chmod 666 tty
mknod klog c 7 0; chmod 600 klog
mknod pci c 78 0; chmod 644 pci
mknod mdctl c 95 0xffff00ff; chmod 600 mdctl
mkdir -p fd
(cd fd && i=0 &&
while [ $i -lt 64 ]; do
mknod $i c 22 $i
i=$(($i + 1))
done
)
chmod 555 fd
chmod 666 fd/*
ln -sf fd/0 stdin
ln -sf fd/1 stdout
ln -sf fd/2 stderr
;;
jail)
sh $0 std pty0
rm mem kmem pci io klog console # for security
ln -sf null mem # for libkvm (ab)users
ln -sf null kmem # --//--
ln -sf null console
;;
mach-4)
mknod iopl c 22 0
mknod kbd c 23 0
mknod mouse c 24 0
mknod time c 25 0
mknod timezone c 26 0
;;
# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
wt*)
umask $tape_umask
u=`expr $i : '..\(.*\)'`
if [ -z "${u}" ]; then u=0; fi
# default density, 512b blocks
mknod rwt${u} c 10 $(( 0 + $u)) root:operator
mknod nrwt${u} c 10 $(( 4 + $u)) root:operator
# default density, 1024b blocks
# mknod rWt${u} c 10 $((64 + $u)) root:operator
# mknod nrWt${u} c 10 $((68 + $u)) root:operator
mknod rwt${u}b c 10 $((16 + $u)) root:operator # 60 megabytes
mknod nrwt${u}b c 10 $((20 + $u)) root:operator
mknod rwt${u}c c 10 $((24 + $u)) root:operator # 120 megabytes
mknod nrwt${u}c c 10 $((28 + $u)) root:operator
mknod rwt${u}d c 10 $((32 + $u)) root:operator # 150 megabytes
mknod nrwt${u}d c 10 $((36 + $u)) root:operator
# mknod rwt${u}e c 10 $((40 + $u)) root:operator # 300 megabytes?
# mknod nrwt${u}e c 10 $((44 + $u)) root:operator
# mknod rwt${u}f c 10 $((48 + $u)) root:operator # 600 megabytes?
# mknod nrwt${u}f c 10 $((52 + $u)) root:operator
umask 77
;;
# Individual slices.
aacd*s*|ad*s*|ar*s*|afd*s*|amrd*s*|da*s*|fla*s*|idad*s*|md*s*|mlxd*s*|twed*s*|wd*s*|wfd*s*)
umask $disk_umask
case $i in
aacd*s*) name=aacd; chr=151;;
ad*s*) name=ad; chr=116;;
ar*s*) name=ar; chr=157;;
afd*s*) name=afd; chr=118;;
amrd*s*) name=amrd; chr=133;;
da*s*) name=da; chr=13;;
fla*s*) name=fla; chr=102;;
idad*s*) name=idad; chr=109;;
md*s*) name=md; chr=95;;
mlxd*s*) name=mlxd; chr=131;;
twed*s*) name=twed; chr=147;;
wd*s*) name=wd; chr=3;;
wfd*s*) name=wfd; chr=87;;
esac
case $i in
aacd*s*|amrd*s*|idad*s*|mlxd*s*|twed*s*)
unit=`expr $i : '....\([0-9]*\)s'`
slice=`expr $i : '....[0-9]*s\([0-9]*\)'`
part=`expr $i : '....[0-9]*s[0-9]*\(.*\)'`
;;
afd*s*|fla*s*|wfd*s*)
unit=`expr $i : '...\([0-9]*\)s'`
slice=`expr $i : '...[0-9]*s\([0-9]*\)'`
part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'`
;;
*)
unit=`expr $i : '..\([0-9]*\)s'`
slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
;;
esac
case $unit in
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
case $slice in
[0-9]|[1-2][0-9]|30)
oldslice=$slice
slice=$(($slice+1))
slicename=`dkitos $slice`
minor=`dkminor 0 $unit $slice $dkrawpart`
mknod $name$unit$slicename c $chr $minor root:operator
ln -f $name$unit$slicename r$name$unit$slicename
case $part in
[a-h])
case $oldslice in
0) slice=$oldslice ;;
esac
for part in 0 1 2 3 4 5 6 7
do
minor=`dkminor 0 $unit $slice $part`
partname=`dkitop $part`
mknod $name$unit$slicename$partname \
c $chr $minor root:operator
ln -f $name$unit$slicename$partname \
r$name$unit$slicename$partname
done
;;
"")
;;
*)
echo bad partition for disk in: $i
;;
esac
;;
*)
echo bad slice for disk in: $i
;;
esac
;;
*)
echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
;;
esac
umask 77
;;
fd*)
umask $disk_umask
unit=`expr $i : '..\(.*\)'`
name=fd; chr=9
case $unit in
0|1|2|3)
mknod ${name}${unit} c $chr $(($unit * 64)) root:operator
# Fake BSD partitions
for i in a b c d e f g h
do
ln -f ${name}${unit} ${name}${unit}$i
done
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
ata)
umask 177
mknod ata c 159 0 root:operator
umask 77
;;
aacd*|ad*|ar*|afd*|amrd*|da*|fla*|idad*|md*|mlxd*|twed*|wd*|wfd*)
umask $disk_umask
case $i in
aacd*) name=aacd; chr=151;;
ad*) name=ad; chr=116;;
ar*) name=ar; chr=157;;
afd*) name=afd; chr=118;;
amrd*) name=amrd; chr=133;;
da*) name=da; chr=13;;
fla*) name=fla; chr=102;;
idad*) name=idad; chr=109;;
md*) name=md; chr=95;;
mlxd*) name=mlxd; chr=131;;
twed*) name=twed; chr=147;;
wd*) name=wd; chr=3;;
wfd*) name=wfd; chr=87;;
esac
case $i in
aacd*|amrd*|idad*|mlxd*|twed*)
unit=`expr $i : '....\(.*\)'`
;;
afd*|fla*|wfd*)
unit=`expr $i : '...\(.*\)'`
;;
*)
unit=`expr $i : '..\(.*\)'`
;;
esac
case $unit in
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
for slicepartname in s0h s1h s2 s3 s4
do
sh $0 $name$unit$slicepartname
done
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
ccd*)
umask $disk_umask
name=ccd
chr=74
unit=`expr $i : '...\(.*\)'`
case $unit in
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
for part in 0 1 2 3 4 5 6 7
do
minor=`dkminor 0 $unit 0 $part`
partname=`dkitop $part`
mknod $name$unit$partname c $chr $minor root:operator
ln -f $name$unit$partname r$name$unit$partname
done
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
# SCSI processor type driver
pt[0-9]*)
chr=61
name=pt
unit=`expr $i : 'pt\([0-9][0-9]*\)'`
if [ -z "${unit}" ]; then
unit=0
fi
unit=$(($unit + 1 - 1))
mknod ${name}${unit} c $chr `unit2minor $unit`
;;
# SCSI SES/SAF-TE type driver
ses[0-9]*)
chr=110
name=ses
unit=`expr $i : 'ses\([0-9][0-9]*\)'`
if [ -z "${unit}" ]; then
unit=0
fi
unit=$(($unit + 1 - 1))
mknod ${name}${unit} c $chr `unit2minor $unit`
;;
# SCSI target mode sample driver
targ[0-9]*)
chr=65
name=targ
unit=`expr $i : 'targ\([0-9][0-9]*\)'`
if [ -z "${unit}" ]; then
unit=0
fi
unit=$(($unit + 1 - 1))
mknod ${name}${unit} c $chr `unit2minor $unit`
mknod ${name}.ctl c $chr 0xffff00ff
;;
# CAM transport layer device
xpt*)
# This major number is temporary
chr=104
name=xpt
units=`expr $i : 'xpt\(.*\)'`
if [ -z "${units}" ]; then
units=1
fi
i=0
while [ $i -lt $units ]; do
dname=$name$i
rm -rf $dname r$dname
mknod $dname c $chr `unit2minor $i` root:operator
i=$(($i + 1))
done
;;
# CAM passthrough device
pass*)
# This major number is temporary
chr=31
name=pass
units=`expr $i : 'pass\(.*\)'`
if [ -z "${units}" ]; then
units=1
fi
i=0
while [ $i -lt $units ]; do
dname=$name$i
rm -rf $dname r$dname
mknod $dname c $chr `unit2minor $i` root:operator
i=$(($i + 1))
done
;;
pty*)
class=`expr $i : 'pty\(.*\)'`
case $class in
0) offset=0 name=p;;
1) offset=32 name=q;;
2) offset=64 name=r;;
3) offset=96 name=s;;
# Note that xterm (at least) only look at p-s.
4) offset=128 name=P;;
5) offset=160 name=Q;;
6) offset=192 name=R;;
7) offset=224 name=S;;
# This still leaves [tuTU].
*) echo bad unit for pty in: $i;;
esac
umask 0
case $class in
0|1|2|3|4|5|6|7)
i=0
while [ $i -lt 32 ]; do
# This was an awk substr() before.
c=$(echo 0123456789abcdefghijklmnopqrstuv |
dd bs=1 skip=$i count=1 2>/dev/null)
mknod tty$name$c c 5 $(($offset + $i))
mknod pty$name$c c 6 $(($offset + $i))
i=$(($i + 1))
done
;;
esac
umask 77
;;
sa*)
umask $tape_umask
unit=`expr $i : '..\(.*\)'`
chr=14
case $unit in
[0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9])
mknod sa${unit}.ctl c $chr `saminor 1 ${unit} 0 0`
ln -f sa${unit}.ctl rsa${unit}.ctl
for m in 0 1 2 3
do
mknod sa${unit}.${m} c $chr \
`saminor 0 ${unit} ${m} 0` root:operator
ln -f sa${unit}.${m} rsa${unit}.${m}
mknod nsa${unit}.${m} c $chr \
`saminor 0 ${unit} ${m} 1` root:operator
ln -f nsa${unit}.${m} nrsa${unit}.${m}
mknod esa${unit}.${m} c $chr \
`saminor 0 ${unit} ${m} 2` root:operator
ln -f esa${unit}.${m} ersa${unit}.${m}
done
ln -f sa${unit}.0 sa${unit}
ln -f sa${unit}.0 rsa${unit}.0
ln -f sa${unit}.0 rsa${unit}
ln -f nsa${unit}.0 nsa${unit}
ln -f nsa${unit}.0 nrsa${unit}.0
ln -f nsa${unit}.0 nrsa${unit}
ln -f esa${unit}.0 esa${unit}
ln -f esa${unit}.0 ersa${unit}.0
ln -f esa${unit}.0 ersa${unit}
;;
*)
echo bad unit for tape in: $i
;;
esac
umask 77
;;
ch*)
umask 37
unit=`expr $i : '..\(.*\)'`
case $i in
ch*) name=ch; chr=17;;
esac
case $unit in
0|1|2|3|4|5|6)
mknod ${name}${unit} c $chr $unit root:operator
;;
*)
echo bad unit for media changer in: $i
;;
esac
umask 77
;;
ast*)
umask 2 ;
unit=`expr $i : '...\(.*\)'`
chr=119
case $unit in
0|1|2|3)
mknod ast${unit} c $chr $(($unit * 8 + 0)) root:operator
chmod 640 ast${unit}
mknod nast${unit} c $chr $(($unit * 8 + 1)) root:operator
chmod 640 nast${unit}
;;
*)
echo bad unit for tape in: $i
;;
esac
umask 77
;;
acd*t*)
umask $disk_umask
units=`expr $i : '...\(.*\)t'`;
tracks=`expr $i : '.*t\(.*\)'`;
name=acd;
chr=117;
if [ -z "${units}" -o "${units}" -le 0 ]; then
units=1
fi
if [ -z "${tracks}" -o "${tracks}" -le 0 ]; then
tracks=100
fi
if [ "${units}" -le 31 -a "${tracks}" -le 169 ]; then
i=0
while [ $i -le $units ]; do
dname=$name$i
rm -rf ${dname}t*
j=1
while [ $j -le ${tracks} ]; do
mknod ${dname}t$j c $chr \
$((($i * 8) + (65536 * $j))) \
root:operator
j=$(($j + 1))
done
i=$(($i + 1))
done
else
echo "$i is invalid -- can't have more than 32 cd devices or 169 tracks"
fi
umask 77
;;
acd*|cd*|mcd*|scd*)
umask $disk_umask
case $i in
acd*) units=`expr $i : '...\(.*\)'`; name=acd; chr=117;;
cd*) units=`expr $i : '..\(.*\)'`; name=cd; chr=15;;
mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; chr=29;;
scd*) units=`expr $i : '...\(.*\)'`; name=scd; chr=45;;
esac
if [ -z "${units}" -o "${units}" -le 0 ]; then
units=1
fi
if [ "${units}" -le 31 ]; then
i=0
while [ $i -le $units ]; do
dname=$name$i
rm -rf ${dname}[!t]* r${dname}*
mknod ${dname}a c $chr $(($i * 8)) root:operator
mknod ${dname}c c $chr $(($i * 8 + 2)) root:operator
ln -f ${dname}a r${dname}a
ln -f ${dname}c r${dname}c
i=$(($i + 1))
done
else
echo "$i is invalid -- can't have more than 32 cd devices"
fi
umask 77
;;
matcd*)
umask 2
case $i in
matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; chr=46;;
esac
case $unit in
0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15)
mknod ${name}${unit}a c $chr $(($unit * 8 + 0)) \
root:operator
mknod ${name}${unit}c c $chr $(($unit * 8 + 2)) \
root:operator
ln -f ${name}${unit}a r${name}${unit}a
ln -f ${name}${unit}c r${name}${unit}c
chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
mknod ${name}${unit}la c $chr $(($unit * 8 + 128)) \
root:operator
mknod ${name}${unit}lc c $chr $(($unit * 8 + 130)) \
root:operator
ln -f ${name}${unit}la r${name}${unit}la
ln -f ${name}${unit}lc r${name}${unit}lc
chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h]
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
wcd*)
umask 2 ;
unit=`expr $i : '...\(.*\)'`
chr=69
case $unit in
0|1|2|3|4|5|6|7)
mknod wcd${unit}a c $chr $(($unit * 8 + 0)) root:operator
mknod wcd${unit}c c $chr $(($unit * 8 + 2)) root:operator
ln -f wcd${unit}a rwcd${unit}a
ln -f wcd${unit}c rwcd${unit}c
chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
wst*)
umask 2 ;
unit=`expr $i : '...\(.*\)'`
chr=90
case $unit in
0|1|2|3)
mknod rwst${unit} c $chr $(($unit * 8 + 0)) root:operator
chmod 640 rwst${unit}
;;
esac
umask 77
;;
iic*)
unit=`expr $i : 'iic\(.*\)'`
mknod iic$unit c 105 `unit2minor $unit`
;;
smb*)
unit=`expr $i : 'smb\(.*\)'`
mknod smb$unit c 106 `unit2minor $unit`
;;
pcfclock*)
unit=`expr $i : 'pcfclock\(.*\)'`
mknod pcfclock$unit c 140 `unit2minor $unit`
;;
ppi*)
unit=`expr $i : 'ppi\(.*\)'`
mknod ppi$unit c 82 `unit2minor $unit`
;;
pps*)
unit=`expr $i : 'pps\(.*\)'`
mknod pps$unit c 89 `unit2minor $unit`
;;
usb)
mknod usb$unit c 108 255 root:operator
chmod 0660 usb$unit
;;
usb*)
umask 7
unit=`expr $i : 'usb\(.*\)'`
mknod usb$unit c 108 `unit2minor $unit` root:operator
umask 77
;;
uhid*)
umask 7
unit=`expr $i : 'uhid\(.*\)'`
mknod uhid$unit c 122 `unit2minor $unit` root:operator
umask 77
;;
ums*)
umask 7
unit=`expr $i : 'ums\(.*\)'`
mknod ums$unit c 111 `unit2minor $unit` root:operator
umask 77
;;
ulpt*)
unit=`expr $i : 'ulpt\(.*\)'`
minor=`unit2minor $unit`
mknod ulpt$unit c 113 $minor
minor=`unit2minor $(($unit + 64))`
mknod unlpt$unit c 113 $minor # and the 'no prime' version
;;
ugen*)
umask 7
unit=`expr $i : 'ugen\([0-9][0-9]*\)'`
endpoint=`expr $i : 'ugen.*\.\([0-9][0-9]*\)'`
if [ -z "${unit}" ]; then
echo $i - Invalid unit number
fi
if [ -z "${endpoint}" ]; then # ugen0 & ugen0.1 - ugen0.15
mknod ugen$unit c 114 \
`unit2minor $(($unit * 16))` root:operator
i=1
while [ $i -lt 16 ]; do
mknod ugen$unit.$i c 114 \
`unit2minor $(($unit * 16 + $i))` root:operator
i=$(($i + 1))
done
else
minor=`unit2minor $(($unit * 16 + $endpoint))`
mknod ugen$unit.$endpoint c 114 $minor root:operator
fi
umask 77
;;
urio*)
umask 7
unit=`expr $i : 'urio\(.*\)'`
mknod urio$unit c 143 `unit2minor $unit` root:operator
umask 77
;;
usio*)
umask 7
unit=`expr $i : 'usio\(.*\)'`
minor=`unit2minor $(($unit + 128))`
mknod usio$unit c 138 $minor uucp:dialer
umask 77
;;
uscanner*)
umask 7
unit=`expr $i : 'uscanner\(.*\)'`
mknod uscanner$unit c 156 `unit2minor $unit` root:operator
umask 77
;;
umodem*)
umask 7
unit=`expr $i : 'umodem\(.*\)'`
mknod umodem$unit c 124 `unit2minor $unit` uucp:dialer
umask 77
;;
lpt*)
unit=`expr $i : 'lpt\(.*\)'`
mknod lpt$unit c 16 `unit2minor $unit`
mknod lpctl$unit c 16 `unit2minor $(($unit + 128))`
;;
# Use this to create virtual consoles for syscons, pcvt or codrv
# ttyv0-b
# use as MAKEDEV vtyNN to create NN entries
vty*)
chr=12
units=`expr $i : 'vty\(.*\)'`
i=0
while [ $i -lt $units ]; do
mknod ttyv$(hexprint $i) c $chr `unit2minor $i`
i=$(($i + 1))
done
ln -fs ttyv0 vga # XXX X still needs this pccons relic
;;
nmdm*)
units=`expr $i : 'nmdm\(.*\)'`
chr=18
i=0
while [ $i -lt $units ]; do
minor=`unit2minor $i`
minor=$(($minor + $minor))
mknod nmdm${i}A c $chr $minor
mknod nmdm${i}B c $chr $(($minor + 1))
i=$(($i + 1))
done
;;
bpf*)
units=`expr $i : 'bpf\(.*\)$'`
unit=0
while [ $unit -le $units ]; do
mknod bpf$unit c 23 `unit2minor $unit`
unit=$(($unit + 1))
done
;;
speaker)
mknod speaker c 26 0
;;
cua?|cuaa?|cuaa??)
umask 7
unit_low=`expr $i : 'cua.*\(.\)$'`
case $i in
cua?|cuaa?)
unit_high=""
m_high=0
;;
cuaa??)
unit_high=`expr $i : 'cuaa\(.\).$'`
m_high=`ttyminor $unit_high`
;;
esac
unit=$unit_high$unit_low
m=$(($m_high << 16 | `ttyminor $unit_low`))
mknod cuaa$unit c 28 $(($m | 128)) uucp:dialer
mknod cuaia$unit c 28 $(($m | 32 | 128)) uucp:dialer
mknod cuala$unit c 28 $(($m | 64 | 128)) uucp:dialer
umask 77
;;
tty?|tty0?|ttyd?|ttyd??)
unit_low=`expr $i : 'tty.*\(.\)$'`
case $i in
tty?|tty0?|ttyd?)
unit_high=""
m_high=0
;;
ttyd??)
unit_high=`expr $i : 'ttyd\(.\).$'`
m_high=`ttyminor $unit_high`
;;
esac
unit=$unit_high$unit_low
m=$(($m_high << 16 | `ttyminor $unit_low`))
mknod ttyd$unit c 28 $m
mknod ttyid$unit c 28 $(($m | 32))
mknod ttyld$unit c 28 $(($m | 64))
;;
cuac?)
umask 7
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
g h i j k l m n o p q r s t u v"
major=48
card=`expr $i : 'cua.*\(.\)$'`
for unit in $portlist
do
minor=`ttyminor $unit`
minor=$(($card * 65536 + $minor))
name=$card$unit
mknod cuac$name c $major $(($minor + 128)) uucp:dialer
mknod cuaic$name c $major $(($minor + 32 + 128)) uucp:dialer
mknod cualc$name c $major $(($minor + 64 + 128)) uucp:dialer
done
umask 77
;;
ttyc?)
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
g h i j k l m n o p q r s t u v"
major=48
card=`expr $i : 'tty.*\(.\)$'`
for unit in $portlist
do
minor=`ttyminor $unit`
minor=$(($card * 65536 + $minor))
name=$card$unit
mknod ttyc$name c $major $minor
mknod ttyic$name c $major $(($minor + 32))
mknod ttylc$name c $major $(($minor + 64))
done
;;
# RISCom8 'rc' driver entries
cuam?)
umask 7
unit=`expr $i : 'cua.*\(.\)$'`
m=`ttyminor $unit`
mknod cuam$unit c 63 $(($m + 128)) uucp:dialer
umask 77
;;
ttym?)
unit=`expr $i : 'tty.*\(.\)$'`
m=`ttyminor $unit`
mknod ttym$unit c 63 $m
;;
# Specialix SI/XIO.
# Note: these are 'base 1' to match the numbers on the panels, and to match
# the manual that comes with the system.
ttyA*)
major=68
units=`expr $i : 'ttyA\(.*\)$'`
port=1
while [ $port -le $units ]; do
minor=$(($port - 1))
name=$(zeropad 2 $port)
mknod ttyA$name c $major $minor
mknod ttyiA$name c $major $(($minor + 65536))
mknod ttylA$name c $major $(($minor + 131072))
port=$(($port + 1))
done
# For the user-mode control program, 'sicontrol'
mknod si_control c 68 262144
;;
cuaA*)
umask 7
major=68
units=`expr $i : 'cuaA\(.*\)$'`
port=1
while [ $port -le $units ]; do
minor=$(($port - 1))
name=$(zeropad 2 $port)
mknod cuaA$name c $major $(($minor + 128)) uucp:dialer
mknod cuaiA$name c $major $(($minor + 128 + 65536)) \
uucp:dialer
mknod cualA$name c $major $(($minor + 128 + 131072)) \
uucp:dialer
port=$(($port + 1))
done
umask 77
;;
# Alpha AS8[24]00 (TurboLaser) console.
zs?)
unit=`expr $i : 'zs.*\(.\)$'`
m=`ttyminor $unit`
mknod zs$unit c 135 $m
;;
# Digiboard PC/?? 16 port card.
# The current scheme of minor numbering is:
#
# unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
#
# CARD bitfield in future versions may be extended to 3 bits.
#
# See dgb(4)
#
ttyD?)
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
major=58
card=`expr $i : 'tty.*\(.\)$'`
for unit in $portlist
do
minor=`ttyminor $unit`
minor=$(($card * 65536 + $minor))
name=$card$unit
mknod ttyD$name c $major $minor
mknod ttyiD$name c $major $(($minor + 32))
mknod ttylD$name c $major $(($minor + 64))
done
# Also create devices for the digi driver
umask 7
major=162
card=`expr $i : 'tty.*\(.\)$'`
rm -f digi$card.ctl
mknod digi$card.ctl c $major $(($card * 65536 + 8388608)) uucp:dialer
unit=0
while [ $unit -lt 16 ]
do
base=$(($card * 65536 + $unit))
name=$card.$unit
rm -f tty*D$name
mknod ttyD$name c $major $base
mknod ttyiD$name c $major $(($base + 1048576))
mknod ttylD$name c $major $(($base + 2097152))
unit=$(($unit + 1))
done
umask 77
;;
cuaD?)
umask 7
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
major=58
card=`expr $i : 'cua.*\(.\)$'`
for unit in $portlist
do
minor=`ttyminor $unit`
minor=$(($card * 65536 + $minor))
name=$card$unit
mknod cuaD$name c $major $(($minor + 128)) uucp:dialer
mknod cuaiD$name c $major $(($minor + 32 + 128)) uucp:dialer
mknod cualD$name c $major $(($minor + 64 + 128)) uucp:dialer
done
# Also create devices for the digi driver
major=162
card=`expr $i : 'cua.*\(.\)$'`
rm -f digi$card.ctl
mknod digi$card.ctl c $major $(($card * 65536 + 8388608)) uucp:dialer
unit=0
while [ $unit -lt 16 ]
do
base=$(($card * 65536 + $unit))
name=$card.$unit
rm -f cua*D$name
mknod cuaD$name c $major $(($base + 4194304)) uucp:dialer
mknod cuaiD$name c $major $(($base + 5242880)) uucp:dialer
mknod cualD$name c $major $(($base + 6291456)) uucp:dialer
unit=$(($unit + 1))
done
umask 77
;;
# Digiboard Xem - superceeded by the digi device above
#
ttyM*)
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
modulelist="a b c d"
major=101
card=`expr $i : 'tty.*\(.\)$'`
for unit in $modulelist
do
moduleminor=`ttyminor $unit`
moduleminor=$(($moduleminor % 10 * 16))
modulename=$unit
for unit in $portlist
do
minor=`ttyminor $unit`
minor=$(($card * 65536 + $minor + $moduleminor))
name=$card$modulename$unit
rm -f tty*M$name
mknod ttyM$name c $major $minor
mknod ttyiM$name c $major $(($minor + 64))
mknod ttylM$name c $major $(($minor + 128))
done
done
;;
cuaM?)
umask 7
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
modulelist="a b c d"
major=101
card=`expr $i : 'cua.*\(.\)$'`
for unit in $modulelist
do
moduleminor=`ttyminor $unit`
moduleminor=$(($moduleminor % 10 * 16))
modulename=$unit
for unit in $portlist
do
minor=`ttyminor $unit`
minor=$(($card * 65536 + $minor + $moduleminor))
name=$card$modulename$unit
rm -f cua*M$name
mknod cuaM$name c $major $(($minor + 262144)) \
uucp:dialer
mknod cuaiM$name c $major $(($minor + 64 + 262144)) \
uucp:dialer
mknod cualM$name c $major $(($minor + 128 + 262144)) \
uucp:dialer
done
done
umask 77
;;
ttyR?)
major=81
BOARD=1; Rnum=0
MINOR=$(($BOARD * 65536))
controllers=$(
dmesg | while read first rest; do
case "$first" in
RocketPort[0-4])
echo "$first"
;;
esac
done
)
rm -f ttyR* ttyiR* ttylR*
for i in $controllers; do
ndevices=$(
dmesg | while read first foo bar ports rest; do
case "$first" in
$i*)
echo "$ports"
;;
esac
done
)
echo -n "Creating $ndevices devices for $i: "
dev=0
while [ $dev -lt $ndevices ]; do
mknod ttyR$Rnum c $major $MINOR
mknod ttyiR$Rnum c $major $(($MINOR + 32))
mknod ttylR$Rnum c $major $(($MINOR + 64))
Rnum=$(($Rnum + 1))
MINOR=$(($MINOR + 1))
dev=$(($dev + 1))
done
BOARD=$(($BOARD + 1))
MINOR=$(($BOARD * 65536))
echo " "
done
;;
cuaR?)
major=81
BOARD=1; Rnum=0
MINOR=$(($BOARD * 65536))
controllers=$(
dmesg | while read first rest; do
case "$first" in
RocketPort[0-4])
echo "$first"
;;
esac
done
)
rm -f cuaR* cuaiR* cualR*
for i in $controllers; do
ndevices=$(
dmesg | while read first foo bar ports rest; do
case "$first" in
$i*)
echo "$ports"
;;
esac
done
)
echo -n "Creating $ndevices devices for $i: "
dev=0
while [ $dev -lt $ndevices ]; do
mknod cuaR$Rnum c $major $(($MINOR + 128)) uucp:dialer
mknod cuaiR$Rnum c $major $(($MINOR + 128 + 32)) \
uucp:dialer
mknod cualR$Rnum c $major $(($MINOR + 128 + 64)) \
uucp:dialer
Rnum=$(($Rnum + 1))
MINOR=$(($MINOR + 1))
dev=$(($dev + 1))
done
BOARD=$(($BOARD + 1))
MINOR=$(($BOARD * 65536))
echo " "
done
;;
mse*)
unit=`expr $i : 'mse\(.*\)'`
chr=27
# non-blocking for X11
mknod mse$unit c $chr `unit2minor $(($unit * 2 + 1))`
;;
psm*)
unit=`expr $i : 'psm\(.*\)'`
chr=21
# non-blocking for X11
mknod psm$unit c $chr `unit2minor $(($unit * 2 + 1))`
;;
mouse*)
name=`expr $i : 'mouse\(.*\)'`
if [ ! -c $name ]; then
$0 $name # make the appropriate device
fi
ln -fs $name mouse
;;
pcaudio)
mknod pcaudio c 24 0
mknod pcaudioctl c 24 128
;;
socksys)
mknod socksys c 41 0
mknod spx c 41 1
ln -fs socksys nfsd
chmod 666 socksys nfsd spx
;;
snd*)
#
# changes from Linux voxware
# minor Linux FreeBSD
# 8 sequencer2 (aka music0) music0
# 17 patmgr0 sequencer1
# 33 patmgr1 sequencer2
#
unit=`expr $i : 'snd\(.*\)'`
chr=30
# XXX write this less verbosely, like std
snd_security_hole=0 # XXX
umask $snd_security_hole
ln -fs mixer$unit mixer
ln -fs sequencer$unit sequencer
ln -fs dsp$unit dsp
ln -fs audio$unit audio
ln -fs dspW$unit dspW
ln -fs music$unit music
ln -fs pss$unit pss
mknod mixer$unit c $chr `unit2minor $(($unit * 16 + 0))`
mknod sequencer$unit c $chr `unit2minor $(($unit * 16 + 1))`
mknod midi$unit c $chr `unit2minor $(($unit * 16 + 2))`
mknod dsp$unit c $chr `unit2minor $(($unit * 16 + 3))`
mknod audio$unit c $chr `unit2minor $(($unit * 16 + 4))`
mknod dspW$unit c $chr `unit2minor $(($unit * 16 + 5))`
mknod sndstat c $chr 6
# minor number 7 is unused
mknod music$unit c $chr `unit2minor $(($unit * 16 + 8))`
mknod pss$unit c $chr `unit2minor $(($unit * 16 + 9))`
# minor number 10 is unused
mknod midistat c $chr 11
# minor numbers 12-15 are unused
umask 77
;;
vat)
mknod vatio c 25 128
chmod 660 vatio
;;
gsc*)
unit=`expr $i : 'gsc\(.*\)'`
mknod gsc${unit} c 47 `unit2minor $unit`
mknod gsc${unit}p c 47 `unit2minor $(($unit + 8))`
mknod gsc${unit}d c 47 `unit2minor $(($unit + 32))`
mknod gsc${unit}pd c 47 `unit2minor $(($unit + 40))`
chmod 666 gsc${unit}*
;;
acpi)
mknod acpi c 152 0 root:operator
chmod 660 acpi
;;
apm)
mknod apm c 39 0 root:operator
chmod 664 apm
;;
apmctl)
mknod apmctl c 39 8 root:operator
chmod 660 apmctl
;;
card*)
unit=`expr $i : 'card\(.*\)'`
chr=50
mknod card$unit c $chr `unit2minor $unit`
chmod 644 card$unit
;;
ttyx?|ttyy?|ttyz?)
case $i in
*0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
*4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
*8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
*c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
esac
case $i in
ttyy?) unit=$(($unit + 16));;
ttyz?) unit=$(($unit + 32));;
esac
mknod $i c 42 $unit
;;
cronyx)
mknod cronyx c 42 63
;;
joy)
mknod joy0 c 51 0 root:operator
mknod joy1 c 51 1 root:operator
chmod 640 joy0 joy1
;;
spigot)
mknod spigot c 11 0
chmod 444 spigot
;;
ctx?)
unit=`expr $i : 'ctx\(.*\)'`
mknod ctx$unit c 40 `unit2minor $unit`
chmod 444 ctx$unit
;;
meteor?)
unit=`expr $i : 'meteor\(.*\)'`
mknod meteor$unit c 67 `unit2minor $unit`
chmod 444 meteor$unit
;;
bktr?)
unit=`expr $i : 'bktr\(.*\)'`
mknod bktr$unit c 92 `unit2minor $unit`
mknod tuner$unit c 92 `unit2minor $((16 + $unit))`
mknod vbi$unit c 92 `unit2minor $((32 + $unit))`
chmod 444 bktr$unit tuner$unit vbi$unit
;;
tun*)
units=`expr $i : 'tun\(.*\)$'`
unit=0
while [ $unit -le $units ]; do
mknod tun$unit c 52 `unit2minor $unit`
unit=$(($unit + 1))
done
;;
tap*)
units=`expr $i : 'tap\(.*\)$'`
unit=0
while [ $unit -le $units ]; do
mknod tap$unit c 149 `unit2minor $unit` root:network
unit=$(($unit + 1))
done
;;
sysmouse)
mknod sysmouse c 12 128
mknod consolectl c 12 255
;;
jogdial)
mknod jogdial c 160 0
;;
snp?)
unit=`expr $i : 'snp\(.*\)'`
mknod snp$unit c 53 `unit2minor $unit`
;;
# dufault@hda.com: If I do much more work on other A-D boards
# then eventually we'll have a "ad" and "dio" interface and some of these
# "labpcaio" ones will be gone.
# labpcaio: D-A and A-D.
# labpcdio: Digital in and Digital out.
#
labpc*)
umask 7
case $i in
labpcaio*)
name=labpcaio
unit=`expr $i : 'labpcaio\(.*\)'`
all="0 1 2 3 4 5 6 7"
offset=0
;;
labpcdio*)
name=labpcdio
unit=`expr $i : 'labpcdio\(.*\)'`
all="0 1 2 3"
offset=8
;;
*)
die 3 "Don't know LabPC type $i"
;;
esac
if [ -z "${unit}" ]; then
unit=all
fi
case $unit in
0|1|2|3|4|5|6|7)
mknod $name$unit c 66 $(($offset + $unit))
;;
all)
for i in $all
do
mknod $name$i c 66 $(($offset + $i))
done
;;
*)
echo "No such LabPC unit: $unit"
;;
esac
umask 77
;;
perfmon)
mknod perfmon c 2 32 root:kmem
chmod 640 perfmon
;;
ipl)
mknod ipl c 79 0
mknod ipnat c 79 1
mknod ipstate c 79 2
mknod ipauth c 79 3
;;
kbd*)
unit=`expr $i : 'kbd\(.*\)'`
chr=112
mknod kbd$unit c $chr `unit2minor $unit`
;;
i4b)
mknod i4b c 60 0
;;
i4bctl)
mknod i4bctl c 55 0
;;
i4brbch*)
unit=`expr $i : 'i4brbch\(.*\)'`
mknod i4brbch$unit c 57 `unit2minor $unit`
;;
i4bteld*)
offset=64
unit=`expr $i : 'i4bteld\(.*\)'`
mknod i4bteld$unit c 56 `unit2minor $(($offset + $unit))`
;;
i4btel*)
unit=`expr $i : 'i4btel\(.*\)'`
mknod i4btel$unit c 56 `unit2minor $unit`
;;
i4btrc*)
unit=`expr $i : 'i4btrc\(.*\)'`
mknod i4btrc$unit c 59 `unit2minor $unit`
;;
aac*)
unit=`expr $i : 'aac\(.*\)'`
mknod aac$unit c 150 `unit2minor $unit`
ln -fs aac$unit afa$unit
ln -fs aac$unit hpn$unit
;;
mlx*)
unit=`expr $i : 'mlx\(.*\)'`
mknod mlx$unit c 130 `unit2minor $unit`
;;
mly*)
unit=`expr $i : 'mlx\(.*\)'`
mknod mlx$unit c 158 `unit2minor $unit`
;;
amr*)
unit=`expr $i : 'amr\(.*\)'`
mknod amr$unit c 132 `unit2minor $unit`
;;
ciss*)
unit=`expr $i : 'ciss\(.*\)'`
mknod ciss$unit c 166 `unit2minor $unit`
;;
3dfx*)
unit=`expr $i : '3dfx\(.*\)'`
mknod 3dfx$unit c 107 `unit2minor $unit`
ln -sf 3dfx$unit 3dfx
ln -sf 3dfx$unit voodoo
;;
agpgart)
mknod agpgart c 148 0
;;
twe*)
unit=`expr $i : 'twe\(.*\)'`
mknod twe$unit c 146 `unit2minor $unit`
;;
tw*)
unit=`expr $i : 'tw\(.*\)'`
mknod tw$unit c 19 `unit2minor $unit` root:operator
;;
cfs*)
unit=`expr $i : 'cfs\(.*\)'`
mknod cfs$unit c 93 $unit root:operator
;;
nsmb*)
unit=`expr $i : 'nsmb\(.*\)'`
mknod nsmb$unit c 144 $unit
;;
local)
umask 0 # XXX should be elsewhere
sh $0.local
umask 77
;;
*)
echo $i - no such device name
;;
esac
done