772a740d28
Move old FAQ to FreeBSD-1.1.FAQ Started new FAQ Move old Systems to Systems-1.1.FAQ Started new Systems moved slip-dialup to Slip.FAQ (Needs to be reworked for 2.0) More work to come...
267 lines
6.6 KiB
Plaintext
267 lines
6.6 KiB
Plaintext
Systems FAQ
|
|
For FreeBSD
|
|
Last Modified: $Id: Systems.FAQ,v 1.1 1994/09/11 10:56:04 jkh Exp $
|
|
|
|
This FAQ is a list of systems that people have sent to the FAQ maintnance
|
|
person for inclusion. If you have a system you would like to be included
|
|
please send it to FreeBSD-FAQ@freefall.cdrom.com.
|
|
|
|
Disclaimer: This document is composed of systems that people have sent to
|
|
the FAQ maintnance person. It is the not to be taken as an endorsement
|
|
for any system or manufacture.
|
|
|
|
|
|
1.
|
|
|
|
386DX/20 real AMI, ISA
|
|
Oak SVGA (no X)
|
|
8MB
|
|
Adaptec 1542B, WD1007V ESDI
|
|
Wren VI and Miniscribe 660MB 20Mbit/sec ESDI
|
|
WD 8013EBT
|
|
|
|
2.
|
|
|
|
486DX/25 clone, AMI BIOS, ISA
|
|
Orchid PCIII gas plasma (yes, VGA16)
|
|
8MB
|
|
Adaptec 1542B
|
|
Micropolis 1684 SCSI
|
|
SMC 8013EEWC
|
|
|
|
3.
|
|
|
|
??? OPTI chipset AMI BIOS 486/50 ISA
|
|
ISA ET4000 w/ X11 (not so slow)
|
|
16 Mb - 48 Mb swap
|
|
ISA aha1542 B
|
|
ISA no-name IDE w/ floppies
|
|
FUJITSU M2623S-512 405MB set to SCSI2
|
|
SEAGATE ST3283N 237MB SCSI2
|
|
SANYO CRD-400I SCSI2 cdromcdrom
|
|
|
|
4.
|
|
|
|
Lipizzan LDO-1 486DX-33 motherboard
|
|
Orchid ProIIs (1M) video
|
|
8 MB memory
|
|
Generic 2S/1P/2FD/IDE controller:
|
|
Maxtor 7213 AT
|
|
WDC AC2420H
|
|
PAS-16 + Sony CDU31A CD drive (Fusion 16 package).
|
|
*** The CD drive does not currently work with FreeBSD.
|
|
|
|
5.
|
|
|
|
Asus VL/ISA-486SV2 (ISA-VLB as you can see)
|
|
Orchid Fahrenheit 1280+ VLB (yes)
|
|
20MB
|
|
Some no-name IDE VLB controller
|
|
Conner CP30504 (I think....the 540MB IDE one)
|
|
Zoltrix 14.4/14.4 Fax/Modem on tty01
|
|
Intel 486DX2/66 CPU + fan
|
|
Conner CP30104 (120MB....for DOS)
|
|
|
|
6.
|
|
|
|
AIR 486El (running with AMD486/40)
|
|
ATI Graphics Ultra Pro running XFree862.1
|
|
16M
|
|
Adaptec 1742
|
|
Micropolis 2217
|
|
Wangtec 6130FS DAT drive (Some problems)
|
|
|
|
7.
|
|
|
|
Compudyne 486 DX2/66
|
|
ATI Local Bus GUP w/ 2megs
|
|
16 Megs Memory
|
|
504 IDE Hard Drive
|
|
Colorado 250 meg QIC-80 tape drive
|
|
|
|
8.
|
|
|
|
American Megatrends Enterprise III, 486DX2-66
|
|
ATI VLB Mach 32 (with X)
|
|
16 meg
|
|
Adaptec 1742 EISA SCSI with floppy
|
|
Toshiba 5030 SCSI-II
|
|
Toshiba 5157 SCSI-II
|
|
SMC Elite16T ISA Ethernet (ISA)
|
|
|
|
9.
|
|
|
|
American Megatrends Enterprise III, 486DX
|
|
ATI VLB Mach 32 (with X)
|
|
32 meg
|
|
Adaptec 1742 EISA SCSI with floppy
|
|
Maxtor P0-12S SCSI
|
|
Digital DSP5200S SCSI-II
|
|
Pro Audio Spectrum 16
|
|
Wonder Board, 4 serial (16550), 3 parallel, each on a different interrupt
|
|
|
|
10.
|
|
|
|
NoName 486DX/33, Intel Chipset, EISA-Bus
|
|
ATI Graphics Ultra Pro EISA,
|
|
17" Nanao (Eizo) F550-i Monitor
|
|
Running the Mach32 X-Server XFree86-2.1.1 with fonts created from source.
|
|
16 MB RAM (planning to add another 8 MB).
|
|
AHA1742A
|
|
Conner CP3100
|
|
Fujitsu 520 MB
|
|
Archive 525MB streamer tape.
|
|
Gravis UltraSound - works for mod-files.
|
|
|
|
11.
|
|
|
|
ASUS SP3 PCI Board with i486 DX/2 66 MHz
|
|
ISA ET4000 (I already tested a S3 805 PCI card successfully)
|
|
Adaptec 1542B
|
|
Toshiba XM3301TA CD-Rom
|
|
CDC Harddisk, 572 MB (I don't know the exact specs)
|
|
|
|
12.
|
|
|
|
Mylex MAE486/33 EISA Motherboard
|
|
16MB memory
|
|
Actix GE32+ S3 801 gfx
|
|
Adaptec 1742A controller
|
|
Seagate ST3160 drive
|
|
Seagate ST5120 drive
|
|
Archive Viper 150MB tape
|
|
Roland SCC-1 sound card
|
|
Gravis Ultrasound card
|
|
Longshine SMC/Novell compatable ethernet card
|
|
|
|
13.
|
|
|
|
Model: DECpc LPv 466d2
|
|
Config: Local (Motherboard) S3 801 gfx, IDE controller, PS/2 mouse, 12MB memory
|
|
|
|
14.
|
|
|
|
|
|
??? 486/DX266 EISA/VLB Motherboard
|
|
16MB memory
|
|
#9 GXE L12 VLB 3MB graphics card
|
|
Bt445S VLB disk controller
|
|
DEC DSP3105S drive
|
|
MAXSTOR P-17S drive
|
|
Tandberg 525MB tape drive
|
|
Toshiba XM3301 CDROM
|
|
Soundblaster 2.0
|
|
Longshine SMC/Novell compatable ethernet card
|
|
|
|
15.
|
|
|
|
M407 PC chips with 33Mhz 486.
|
|
Had to disable external cache due to DMA problems. Board uses write-through
|
|
cache unless a second chip is added to allow write-back.write-back.
|
|
Orchid ProDesigner II (yes)
|
|
16Mb
|
|
IDE
|
|
Maxtor 7213 AT and Maxtor 7120 AT
|
|
2 BICC Isolans (Lance based cards)
|
|
|
|
16.
|
|
|
|
Gigabyte EISA/VLB motherboard with SIS chipset, AMI bios, 32 MB ram
|
|
Adaptec 1742 SCSI 2 controller with floppy controller enabled
|
|
Spea/V7 Mirage - S3/805 based localbus graphics card with 1 MB d-ram
|
|
no name wd8013 compatible ethernet card
|
|
Gravis Ultrasound card with 1 MB ram
|
|
2 Fujitsu 400 MB and 1 Seagate 500 MB SCSI 2 harddisks
|
|
5 1/4 + 3 1/2 inch floppy drives
|
|
Tandberg TDC3600 60 MB + Tandberg TDC3800 525 MB Streamer (these don't work
|
|
quite properly yet)
|
|
|
|
17.
|
|
|
|
i486DX33, 16 Mb RAM, 256 Kb external cache, VLB board
|
|
no-name IDE/floppy controller
|
|
Western Digital Caviar 2340 (325 Mb)
|
|
Kalok KL-343 (40 Mb)
|
|
Chips & Technologies 451 SuperVGA card (800x600, 16 colours, 256Kb)
|
|
|
|
18.
|
|
|
|
no name EISA i486DX/33 board, 16 MB RAM
|
|
Adaptec AHA-1540*A* (not knowing if the current -current might cause
|
|
problems, my kernel is from end of march)
|
|
Maxtor MXT-1240S, 1.2Gig very fast SCSI disk
|
|
Seagate ST-1144A, just to boot off the beast (also has a messdos partition yet)
|
|
Archive Viper 150 tape; has a firmware braindeadness when appending files,
|
|
works very well otherwise
|
|
ELSA Winner 1000 ISA/EISA, 1MB VRAM, S3 86C928 (unfortunately, D-step chip)
|
|
Nokia 447-B 17in monitor, running ~ 1100x800 resolution, very nice
|
|
true `Mouse Systems' optical mouse, fine thing!
|
|
sometimes a Toshiba XM-3301 CDROM, rather old, but solid & reliable
|
|
|
|
19.
|
|
|
|
older south-east Asia made notebook, i386SX/16, 5 MB RAM (where the 384 k hole
|
|
can be re-mapped, so all the 5 MB are useable)
|
|
Seagate ST-9145AG, 120 MB 2.5in IDE disk, very low power consumption, but
|
|
rather slow transfer rate, only about 350 K/s, so paging is a mess
|
|
640x480 LCD, ~ 16 gray tones distinguishable, Cirrus Logic CL-GD610/620
|
|
chipset; runs generic VGA-Mono and VGA-16 XFree86[tm] servers; needs
|
|
some hacks in rc.local to give full contrast when running with the
|
|
pcvt display driver (due to their different default attribute handling)
|
|
|
|
|
|
20.
|
|
|
|
Data General Dasher 386sx/16, 8 MB RAM
|
|
Adaptec AHA-1542B
|
|
Seagate ST-3655N, 525 MB SCSI disk
|
|
Conner CP-3044, 40 MB IDE disk
|
|
has been working with a Western Digital WD-1007V ESDI controller (on
|
|
secondary wdc address), and a Micropolis 1664-7 330 MB ESDI disk -
|
|
but this beast was terribly slow, loud (& unreliable) and therefore
|
|
had to go
|
|
ET-3000 based 512 K VGA, slow (wrt. XFree86), but reliable
|
|
3Com 3C503 Ethernet adaptor, suffers from the `do not nfs mount with
|
|
too large packets' problem, but works well otherwise
|
|
`Mouse Systems' optical mouse
|
|
Toshiba XM-3301 CDROM
|
|
already ran with a Micropolis 1664-3 330 MB SCSI disk (same drive as
|
|
above, but different interface)
|
|
already ran with an IBM 2Gig SCSI disk (don't remember the type)
|
|
|
|
|
|
21.
|
|
|
|
Mylex MNA 486/33 EISA Motherboard
|
|
16Mb of Memory
|
|
1.2 GB Toshiba 538 SCSI disk
|
|
400Mb IBM SCSI disk
|
|
150/250Mb Tandberg SCSI tape drive
|
|
Toshiba 3401 SCSI CD-ROM
|
|
Tseng 4000 Video Controller
|
|
Logitech Bus Mouse
|
|
Mediavision Pro Audio Stereo Sound Card
|
|
Adaptech 1742A SCSI controller
|
|
WD8013EBT Ethernet Card
|
|
|
|
22.
|
|
|
|
386DX-40 w/Cyrix math co-processor
|
|
ET-4000 running X
|
|
16MB
|
|
IDE
|
|
540MB Western Digital
|
|
WD8003EP
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|