freebsd-dev/sys/mips/rmi/tick.c
Matthew D Fleming cbc134ad03 Introduce signed and unsigned version of CTLTYPE_QUAD, renaming
existing uses.  Rename sysctl_handle_quad() to sysctl_handle_64().
2011-01-19 23:00:25 +00:00

388 lines
9.6 KiB
C

/*-
* Copyright (c) 2006-2007 Bruce M. Simpson.
* Copyright (c) 2003-2004 Juli Mallett.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Simple driver for the 32-bit interval counter built in to all
* MIPS32 CPUs.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_cputype.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/power.h>
#include <sys/smp.h>
#include <sys/time.h>
#include <sys/timeet.h>
#include <sys/timetc.h>
#include <machine/hwfunc.h>
#include <machine/clock.h>
#include <machine/locore.h>
#include <machine/md_var.h>
#include <machine/intr_machdep.h>
#include <mips/rmi/interrupt.h>
uint64_t counter_freq;
struct timecounter *platform_timecounter;
static DPCPU_DEFINE(uint32_t, cycles_per_tick);
static uint32_t cycles_per_usec;
static DPCPU_DEFINE(volatile uint32_t, counter_upper);
static DPCPU_DEFINE(volatile uint32_t, counter_lower_last);
static DPCPU_DEFINE(uint32_t, compare_ticks);
static DPCPU_DEFINE(uint32_t, lost_ticks);
struct clock_softc {
int intr_rid;
struct resource *intr_res;
void *intr_handler;
struct timecounter tc;
struct eventtimer et;
};
static struct clock_softc *softc;
/*
* Device methods
*/
static int clock_probe(device_t);
static void clock_identify(driver_t *, device_t);
static int clock_attach(device_t);
static unsigned counter_get_timecount(struct timecounter *tc);
void
mips_timer_early_init(uint64_t clock_hz)
{
/* Initialize clock early so that we can use DELAY sooner */
counter_freq = clock_hz;
cycles_per_usec = (clock_hz / (1000 * 1000));
}
void
platform_initclocks(void)
{
if (platform_timecounter != NULL)
tc_init(platform_timecounter);
}
static uint64_t
tick_ticker(void)
{
uint64_t ret;
uint32_t ticktock;
uint32_t t_lower_last, t_upper;
/*
* Disable preemption because we are working with cpu specific data.
*/
critical_enter();
/*
* Note that even though preemption is disabled, interrupts are
* still enabled. In particular there is a race with clock_intr()
* reading the values of 'counter_upper' and 'counter_lower_last'.
*
* XXX this depends on clock_intr() being executed periodically
* so that 'counter_upper' and 'counter_lower_last' are not stale.
*/
do {
t_upper = DPCPU_GET(counter_upper);
t_lower_last = DPCPU_GET(counter_lower_last);
} while (t_upper != DPCPU_GET(counter_upper));
ticktock = mips_rd_count();
critical_exit();
/* COUNT register wrapped around */
if (ticktock < t_lower_last)
t_upper++;
ret = ((uint64_t)t_upper << 32) | ticktock;
return (ret);
}
void
mips_timer_init_params(uint64_t platform_counter_freq, int double_count)
{
/*
* XXX: Do not use printf here: uart code 8250 may use DELAY so this
* function should be called before cninit.
*/
counter_freq = platform_counter_freq;
/*
* XXX: Some MIPS32 cores update the Count register only every two
* pipeline cycles.
* We know this because of status registers in CP0, make it automatic.
*/
if (double_count != 0)
counter_freq /= 2;
cycles_per_usec = counter_freq / (1 * 1000 * 1000);
set_cputicker(tick_ticker, counter_freq, 1);
}
static int
sysctl_machdep_counter_freq(SYSCTL_HANDLER_ARGS)
{
int error;
uint64_t freq;
if (softc == NULL)
return (EOPNOTSUPP);
freq = counter_freq;
error = sysctl_handle_64(oidp, &freq, sizeof(freq), req);
if (error == 0 && req->newptr != NULL) {
counter_freq = freq;
softc->et.et_frequency = counter_freq;
softc->tc.tc_frequency = counter_freq;
}
return (error);
}
SYSCTL_PROC(_machdep, OID_AUTO, counter_freq, CTLTYPE_U64 | CTLFLAG_RW,
NULL, 0, sysctl_machdep_counter_freq, "QU",
"Timecounter frequency in Hz");
static unsigned
counter_get_timecount(struct timecounter *tc)
{
return (mips_rd_count());
}
/*
* Wait for about n microseconds (at least!).
*/
void
DELAY(int n)
{
uint32_t cur, last, delta, usecs;
/*
* This works by polling the timer and counting the number of
* microseconds that go by.
*/
last = mips_rd_count();
delta = usecs = 0;
while (n > usecs) {
cur = mips_rd_count();
/* Check to see if the timer has wrapped around. */
if (cur < last)
delta += cur + (0xffffffff - last) + 1;
else
delta += cur - last;
last = cur;
if (delta >= cycles_per_usec) {
usecs += delta / cycles_per_usec;
delta %= cycles_per_usec;
}
}
}
static int
clock_start(struct eventtimer *et,
struct bintime *first, struct bintime *period)
{
uint32_t fdiv, div, next;
if (period != NULL) {
div = (et->et_frequency * (period->frac >> 32)) >> 32;
if (period->sec != 0)
div += et->et_frequency * period->sec;
} else
div = 0;
if (first != NULL) {
fdiv = (et->et_frequency * (first->frac >> 32)) >> 32;
if (first->sec != 0)
fdiv += et->et_frequency * first->sec;
} else
fdiv = div;
DPCPU_SET(cycles_per_tick, div);
next = mips_rd_count() + fdiv;
DPCPU_SET(compare_ticks, next);
mips_wr_compare(next);
return (0);
}
static int
clock_stop(struct eventtimer *et)
{
DPCPU_SET(cycles_per_tick, 0);
mips_wr_compare(0xffffffff);
return (0);
}
/*
* Device section of file below
*/
static int
clock_intr(void *arg)
{
struct clock_softc *sc = (struct clock_softc *)arg;
uint32_t cycles_per_tick;
uint32_t count, compare_last, compare_next, lost_ticks;
cycles_per_tick = DPCPU_GET(cycles_per_tick);
/*
* Set next clock edge.
*/
count = mips_rd_count();
compare_last = DPCPU_GET(compare_ticks);
if (cycles_per_tick > 0) {
compare_next = count + cycles_per_tick;
DPCPU_SET(compare_ticks, compare_next);
mips_wr_compare(compare_next);
} else /* In one-shot mode timer should be stopped after the event. */
mips_wr_compare(0xffffffff);
/* COUNT register wrapped around */
if (count < DPCPU_GET(counter_lower_last)) {
DPCPU_SET(counter_upper, DPCPU_GET(counter_upper) + 1);
}
DPCPU_SET(counter_lower_last, count);
if (cycles_per_tick > 0) {
/*
* Account for the "lost time" between when the timer interrupt
* fired and when 'clock_intr' actually started executing.
*/
lost_ticks = DPCPU_GET(lost_ticks);
lost_ticks += count - compare_last;
/*
* If the COUNT and COMPARE registers are no longer in sync
* then make up some reasonable value for the 'lost_ticks'.
*
* This could happen, for e.g., after we resume normal
* operations after exiting the debugger.
*/
if (lost_ticks > 2 * cycles_per_tick)
lost_ticks = cycles_per_tick;
while (lost_ticks >= cycles_per_tick) {
if (sc->et.et_active)
sc->et.et_event_cb(&sc->et, sc->et.et_arg);
lost_ticks -= cycles_per_tick;
}
DPCPU_SET(lost_ticks, lost_ticks);
}
if (sc->et.et_active)
sc->et.et_event_cb(&sc->et, sc->et.et_arg);
return (FILTER_HANDLED);
}
static int
clock_probe(device_t dev)
{
if (device_get_unit(dev) != 0)
panic("can't attach more clocks");
device_set_desc(dev, "Generic MIPS32 ticker");
return (0);
}
static void
clock_identify(driver_t * drv, device_t parent)
{
BUS_ADD_CHILD(parent, 0, "clock", 0);
}
static int
clock_attach(device_t dev)
{
struct clock_softc *sc;
softc = sc = device_get_softc(dev);
cpu_establish_hardintr("compare", clock_intr, NULL,
sc, IRQ_TIMER, INTR_TYPE_CLK, &sc->intr_handler);
sc->tc.tc_get_timecount = counter_get_timecount;
sc->tc.tc_counter_mask = 0xffffffff;
sc->tc.tc_frequency = counter_freq;
sc->tc.tc_name = "MIPS32";
sc->tc.tc_quality = 800;
sc->tc.tc_priv = sc;
tc_init(&sc->tc);
sc->et.et_name = "MIPS32";
sc->et.et_flags = ET_FLAGS_PERIODIC | ET_FLAGS_ONESHOT |
ET_FLAGS_PERCPU;
sc->et.et_quality = 800;
sc->et.et_frequency = counter_freq;
sc->et.et_min_period.sec = 0;
sc->et.et_min_period.frac = 0x00004000LLU << 32; /* To be safe. */
sc->et.et_max_period.sec = 0xfffffffeU / sc->et.et_frequency;
sc->et.et_max_period.frac =
((0xfffffffeLLU << 32) / sc->et.et_frequency) << 32;
sc->et.et_start = clock_start;
sc->et.et_stop = clock_stop;
sc->et.et_priv = sc;
et_register(&sc->et);
return (0);
}
static device_method_t clock_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, clock_probe),
DEVMETHOD(device_identify, clock_identify),
DEVMETHOD(device_attach, clock_attach),
DEVMETHOD(device_detach, bus_generic_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
{0, 0}
};
static driver_t clock_driver = {
"clock",
clock_methods,
sizeof(struct clock_softc),
};
static devclass_t clock_devclass;
DRIVER_MODULE(clock, nexus, clock_driver, clock_devclass, 0, 0);