freebsd-dev/sys/sparc64/include/asi.h
Marius Strobl a4eba4a555 For cheetah-class CPUs ensure that the dt512_0 is set to hold 8k pages
for all three contexts and configure the dt512_1 to hold 4MB pages for
them (e.g. for direct mappings).
This might allow for additional optimization by using the faulting
page sizes provided by AA_DMMU_TAG_ACCESS_EXT for bypassing the page
size walker for the dt512 in the superpage support code.

Submitted by:	nwhitehorn (initial patch)
2008-09-08 21:24:25 +00:00

248 lines
7.9 KiB
C

/*-
* Copyright (c) 1997 Berkeley Software Design, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Berkeley Software Design Inc's name may not be used to endorse or
* promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY BERKELEY SOFTWARE DESIGN INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BERKELEY SOFTWARE DESIGN INC BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: BSDI: asi.h,v 1.3 1997/08/08 14:31:42 torek
* $FreeBSD$
*/
#ifndef _MACHINE_ASI_H_
#define _MACHINE_ASI_H_
/*
* Standard v9 asis
*/
#define ASI_N 0x4
#define ASI_NL 0xc
#define ASI_AIUP 0x10
#define ASI_AIUS 0x11
#define ASI_AIUPL 0x18
#define ASI_AIUSL 0x19
#define ASI_P 0x80
#define ASI_S 0x81
#define ASI_PNF 0x82
#define ASI_SNF 0x83
#define ASI_PL 0x88
#define ASI_SL 0x89
#define ASI_PNFL 0x8a
#define ASI_SNFL 0x8b
/*
* UltraSPARC extensions. ASIs limited to a certain family are annotated.
*/
#define ASI_PHYS_USE_EC 0x14
#define ASI_PHYS_BYPASS_EC_WITH_EBIT 0x15
#define ASI_PHYS_USE_EC_L 0x1c
#define ASI_PHYS_BYPASS_EC_WITH_EBIT_L 0x1d
#define ASI_NUCLEUS_QUAD_LDD 0x24
#define ASI_NUCLEUS_QUAD_LDD_L 0x2c
#define ASI_PCACHE_STATUS_DATA 0x30 /* US-III Cu */
#define ASI_PCACHE_DATA 0x31 /* US-III Cu */
#define ASI_PCACHE_TAG 0x32 /* US-III Cu */
#define ASI_PCACHE_SNOOP_TAG 0x33 /* US-III Cu */
#define ASI_ATOMIC_QUAD_LDD_PHYS 0x34 /* US-III Cu */
#define ASI_WCACHE_VALID_BITS 0x38 /* US-III Cu */
#define ASI_WCACHE_DATA 0x39 /* US-III Cu */
#define ASI_WCACHE_TAG 0x3a /* US-III Cu */
#define ASI_WCACHE_SNOOP_TAG 0x3b /* US-III Cu */
#define ASI_ATOMIC_QUAD_LDD_PHYS_L 0x3c /* US-III Cu */
#define ASI_SRAM_FAST_INIT 0x40 /* US-III Cu */
#define ASI_DCACHE_INVALIDATE 0x42 /* US-III Cu */
#define ASI_DCACHE_UTAG 0x43 /* US-III Cu */
#define ASI_DCACHE_SNOOP_TAG 0x44 /* US-III Cu */
/* Named ASI_DCUCR on US-III, but is mostly identical except for added bits. */
#define ASI_LSU_CTL_REG 0x45
#define ASI_DCACHE_DATA 0x46
#define ASI_DCACHE_TAG 0x47
#define ASI_INTR_DISPATCH_STATUS 0x48
#define ASI_INTR_RECEIVE 0x49
#define ASI_UPA_CONFIG_REG 0x4a /* US-I, II */
#define ASI_FIREPLANE_CONFIG_REG 0x4a /* US-III Cu */
#define AA_FIREPLANE_CONFIG 0x0 /* US-III Cu */
#define AA_FIREPLANE_ADDRESS 0x8 /* US-III Cu */
#define ASI_ESTATE_ERROR_EN_REG 0x4b
#define AA_ESTATE_CEEN 0x1
#define AA_ESTATE_NCEEN 0x2
#define AA_ESTATE_ISAPEN 0x4
#define ASI_AFSR 0x4c
#define ASI_AFAR 0x4d
#define ASI_ECACHE_TAG_DATA 0x4e
#define ASI_IMMU_TAG_TARGET_REG 0x50
#define ASI_IMMU 0x50
#define AA_IMMU_TTR 0x0
#define AA_IMMU_SFSR 0x18
#define AA_IMMU_TSB 0x28
#define AA_IMMU_TAR 0x30
#define AA_IMMU_TSB_PEXT_REG 0x48 /* US-III family */
#define AA_IMMU_TSB_SEXT_REG 0x50 /* US-III family */
#define AA_IMMU_TSB_NEXT_REG 0x58 /* US-III family */
#define ASI_IMMU_TSB_8KB_PTR_REG 0x51
#define ASI_IMMU_TSB_64KB_PTR_REG 0x52
#define ASI_SERIAL_ID 0x53 /* US-III family */
#define ASI_ITLB_DATA_IN_REG 0x54
/* US-III Cu: also ASI_ITLB_CAM_ADDRESS_REG */
#define ASI_ITLB_DATA_ACCESS_REG 0x55
#define ASI_ITLB_TAG_READ_REG 0x56
#define ASI_IMMU_DEMAP 0x57
#define ASI_DMMU_TAG_TARGET_REG 0x58
#define ASI_DMMU 0x58
#define AA_DMMU_TTR 0x0
#define AA_DMMU_PCXR 0x8
#define AA_DMMU_SCXR 0x10
#define AA_DMMU_SFSR 0x18
#define AA_DMMU_SFAR 0x20
#define AA_DMMU_TSB 0x28
#define AA_DMMU_TAR 0x30
#define AA_DMMU_VWPR 0x38
#define AA_DMMU_PWPR 0x40
#define AA_DMMU_TSB_PEXT_REG 0x48
#define AA_DMMU_TSB_SEXT_REG 0x50
#define AA_DMMU_TSB_NEXT_REG 0x58
#define AA_DMMU_TAG_ACCESS_EXT 0x60 /* US-III family */
#define ASI_DMMU_TSB_8KB_PTR_REG 0x59
#define ASI_DMMU_TSB_64KB_PTR_REG 0x5a
#define ASI_DMMU_TSB_DIRECT_PTR_REG 0x5b
#define ASI_DTLB_DATA_IN_REG 0x5c
/* US-III Cu: also ASI_DTLB_CAM_ADDRESS_REG */
#define ASI_DTLB_DATA_ACCESS_REG 0x5d
#define ASI_DTLB_TAG_READ_REG 0x5e
#define ASI_DMMU_DEMAP 0x5f
#define ASI_IIU_INST_TRAP 0x60 /* US-III family */
#define ASI_ICACHE_INSTR 0x66
#define ASI_ICACHE_TAG 0x67
#define ASI_ICACHE_SNOOP_TAG 0x68 /* US-III family */
#define ASI_ICACHE_PRE_DECODE 0x6e /* US-I, II */
#define ASI_ICACHE_PRE_NEXT_FIELD 0x6f /* US-I, II */
#define ASI_BLK_AUIP 0x70
#define ASI_BLK_AIUS 0x71
#define ASI_MCU_CONFIG_REG 0x72 /* US-III Cu */
#define AA_MCU_TIMING1_REG 0x0 /* US-III Cu */
#define AA_MCU_TIMING2_REG 0x8 /* US-III Cu */
#define AA_MCU_TIMING3_REG 0x10 /* US-III Cu */
#define AA_MCU_TIMING4_REG 0x18 /* US-III Cu */
#define AA_MCU_DEC1_REG 0x20 /* US-III Cu */
#define AA_MCU_DEC2_REG 0x28 /* US-III Cu */
#define AA_MCU_DEC3_REG 0x30 /* US-III Cu */
#define AA_MCU_DEC4_REG 0x38 /* US-III Cu */
#define AA_MCU_ADDR_CNTL_REG 0x40 /* US-III Cu */
#define ASI_ECACHE_DATA 0x74 /* US-III Cu */
#define ASI_ECACHE_CONTROL 0x75 /* US-III Cu */
#define ASI_ECACHE_W 0x76
/*
* With the advent of the US-III, the numbering has changed, as additional
* registers were inserted in between. We retain the original ordering for
* now, and append an A to the inserted registers.
* Exceptions are AA_SDB_INTR_D6 and AA_SDB_INTR_D7, which were appended
* at the end.
*/
#define ASI_SDB_ERROR_W 0x77
#define ASI_SDB_CONTROL_W 0x77
#define ASI_SDB_INTR_W 0x77
#define AA_SDB_ERR_HIGH 0x0
#define AA_SDB_ERR_LOW 0x18
#define AA_SDB_CNTL_HIGH 0x20
#define AA_SDB_CNTL_LOW 0x38
#define AA_SDB_INTR_D0 0x40
#define AA_SDB_INTR_D0A 0x48 /* US-III family */
#define AA_SDB_INTR_D1 0x50
#define AA_SDB_INTR_D1A 0x5A /* US-III family */
#define AA_SDB_INTR_D2 0x60
#define AA_SDB_INTR_D2A 0x68 /* US-III family */
#define AA_INTR_SEND 0x70
#define AA_SDB_INTR_D6 0x80 /* US-III family */
#define AA_SDB_INTR_D7 0x88 /* US-III family */
#define ASI_BLK_AIUPL 0x78
#define ASI_BLK_AIUSL 0x79
#define ASI_ECACHE_R 0x7e
/*
* These have the same registers as their corresponding write versions
* except for AA_INTR_SEND.
*/
#define ASI_SDB_ERROR_R 0x7f
#define ASI_SDB_CONTROL_R 0x7f
#define ASI_SDB_INTR_R 0x7f
#define ASI_PST8_P 0xc0
#define ASI_PST8_S 0xc1
#define ASI_PST16_P 0xc2
#define ASI_PST16_S 0xc3
#define ASI_PST32_P 0xc4
#define ASI_PST32_S 0xc5
#define ASI_PST8_PL 0xc8
#define ASI_PST8_SL 0xc9
#define ASI_PST16_PL 0xca
#define ASI_PST16_SL 0xcb
#define ASI_PST32_PL 0xcc
#define ASI_PST32_SL 0xcd
#define ASI_FL8_P 0xd0
#define ASI_FL8_S 0xd1
#define ASI_FL16_P 0xd2
#define ASI_FL16_S 0xd3
#define ASI_FL8_PL 0xd8
#define ASI_FL8_SL 0xd9
#define ASI_FL16_PL 0xda
#define ASI_FL16_SL 0xdb
#define ASI_BLK_COMMIT_P 0xe0
#define ASI_BLK_COMMIT_S 0xe1
#define ASI_BLK_P 0xf0
#define ASI_BLK_S 0xf1
#define ASI_BLK_PL 0xf8
#define ASI_BLK_SL 0xf9
#endif /* !_MACHINE_ASI_H_ */