freebsd-dev/etc/defaults/rc.conf
Baptiste Daroussin 7f5ddefe05 Add a savecore_enable variable support for the savecore rc script
By default set to 'YES' so it does not change the current behaviour for users,
this variable allows to decide to not extract crach dumps from the dump
device at boot time by setting it to "NO" in rc.conf.

Sponsored by:	Gandi.net
2016-04-29 12:23:56 +00:00

736 lines
37 KiB
Bash

#!/bin/sh
# This is rc.conf - a file full of useful variables that you can set
# to change the default startup behavior of your system. You should
# not edit this file! Put any overrides into one of the ${rc_conf_files}
# instead and you will be able to update these defaults later without
# spamming your local configuration information.
#
# The ${rc_conf_files} files should only contain values which override
# values set in this file. This eases the upgrade path when defaults
# are changed and new features are added.
#
# All arguments must be in double or single quotes.
#
# For a more detailed explanation of all the rc.conf variables, please
# refer to the rc.conf(5) manual page.
#
# $FreeBSD$
##############################################################
### Important initial Boot-time options ####################
##############################################################
#rc_debug="NO" # Set to YES to enable debugging output from rc.d
rc_info="NO" # Enables display of informational messages at boot.
rc_startmsgs="YES" # Show "Starting foo:" messages at boot
rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
early_late_divider="FILESYSTEMS" # Script that separates early/late
# stages of the boot process. Make sure you know
# the ramifications if you change this.
# See rc.conf(5) for more details.
always_force_depends="NO" # Set to check that indicated dependencies are
# running during boot (can increase boot time).
apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
apmd_enable="NO" # Run apmd to handle APM event from userland.
apmd_flags="" # Flags to apmd (if enabled).
ddb_enable="NO" # Set to YES to load ddb scripts at boot.
ddb_config="/etc/ddb.conf" # ddb(8) config file.
devd_enable="YES" # Run devd, to trigger programs on device tree changes.
devd_flags="" # Additional flags for devd(8).
#kld_list="" # Kernel modules to load after local disks are mounted
kldxref_enable="NO" # Build linker.hints files with kldxref(8).
kldxref_clobber="NO" # Overwrite old linker.hints at boot.
kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
powerd_enable="NO" # Run powerd to lower our power usage.
powerd_flags="" # Flags to powerd (if enabled).
tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
tmpsize="20m" # Size of mfs /tmp if created
tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
varsize="32m" # Size of mfs /var if created
varmfs_flags="-S" # Extra mount options for the mfs /var
populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
cleanvar_enable="YES" # Clean the /var directory
local_startup="/usr/local/etc/rc.d" # startup script dirs.
script_name_sep=" " # Change if your startup scripts' names contain spaces
rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
# ZFS support
zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
gptboot_enable="YES" # GPT boot success/failure reporting.
# Experimental - test before enabling
gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
gbde_lockdir="/etc" # Where to look for gbde lockfiles
# GELI disk encryption configuration.
geli_devices="" # List of devices to automatically attach in addition to
# GELI devices listed in /etc/fstab.
geli_tries="" # Number of times to attempt attaching geli device.
# If empty, kern.geom.eli.tries will be used.
geli_default_flags="" # Default flags for geli(8).
geli_autodetach="YES" # Automatically detach on last close.
# Providers are marked as such when all file systems are
# mounted.
# Example use.
#geli_devices="da1 mirror/home"
#geli_da1_flags="-p -k /etc/geli/da1.keys"
#geli_da1_autodetach="NO"
#geli_mirror_home_flags="-k /etc/geli/home.keys"
root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
root_hold_delay="30" # Time to wait for root mount hold release.
fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
fsck_y_flags="" # Additional flags for fsck -y
background_fsck="YES" # Attempt to run fsck in the background where possible.
background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
netfs_types="nfs:NFS smbfs:SMB" # Net filesystems.
extra_netfs_types="NO" # List of network extra filesystem types for delayed
# mount at startup (or NO).
##############################################################
### Network configuration sub-section ######################
##############################################################
### Basic network and firewall/security options: ###
hostname="" # Set this!
hostid_enable="YES" # Set host UUID.
hostid_file="/etc/hostid" # File with hostuuid.
nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
dhclient_program="/sbin/dhclient" # Path to dhcp client program.
dhclient_flags="" # Extra flags to pass to dhcp client.
#dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
background_dhclient="NO" # Start dhcp client in the background.
#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
synchronous_dhclient="NO" # Start dhclient directly on configured
# interfaces during startup.
defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
defaultroute_carrier_delay="5" # Time to wait for carrier while waiting for a default route.
netif_enable="YES" # Set to YES to initialize network interfaces
netif_ipexpand_max="2048" # Maximum number of IP addrs in a range spec.
wpa_supplicant_program="/usr/sbin/wpa_supplicant"
wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
#
firewall_enable="NO" # Set to YES to enable firewall functionality
firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
firewall_quiet="NO" # Set to YES to suppress rule display
firewall_logging="NO" # Set to YES to enable events logging
firewall_logif="NO" # Set to YES to create logging-pseudo interface
firewall_flags="" # Flags passed to ipfw when type is a file
firewall_coscripts="" # List of executables/scripts to run after
# firewall starts/stops
firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
# firewall.
#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
# "client" firewall.
firewall_simple_iif="ed1" # Inside network interface for "simple"
# firewall.
firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
# firewall.
firewall_simple_oif="ed0" # Outside network interface for "simple"
# firewall.
firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
# firewall.
#firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
# firewall.
#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
# for "simple" firewall.
#firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
# firewall.
#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
# for "simple" firewall.
firewall_myservices="" # List of TCP ports on which this host
# offers services for "workstation" firewall.
firewall_allowservices="" # List of IPs which have access to
# $firewall_myservices for "workstation"
# firewall.
firewall_trusted="" # List of IPs which have full access to this
# host for "workstation" firewall.
firewall_logdeny="NO" # Set to YES to log default denied incoming
# packets for "workstation" firewall.
firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
# for which denied incoming packets are not
# logged for "workstation" firewall.
firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
firewall_nat_interface="" # Public interface or IPaddress to use
firewall_nat_flags="" # Additional configuration parameters
dummynet_enable="NO" # Load the dummynet(4) module
ip_portrange_first="NO" # Set first dynamically allocated port
ip_portrange_last="NO" # Set last dynamically allocated port
ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
ike_flags="" # Additional flags for IKE daemon
ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
natd_program="/sbin/natd" # path to natd, if you want a different one.
natd_enable="NO" # Enable natd (if firewall_enable == YES).
natd_interface="" # Public interface or IPaddress to use.
natd_flags="" # Additional flags for natd.
ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
ipfilter_program="/sbin/ipf" # where the ipfilter program lives
ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
# /usr/src/contrib/ipfilter/rules for examples
ipfilter_flags="" # additional flags for ipfilter
ipnat_enable="NO" # Set to YES to enable ipnat functionality
ipnat_program="/sbin/ipnat" # where the ipnat program lives
ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
ipnat_flags="" # additional flags for ipnat
ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
ipfs_enable="NO" # Set to YES to enable saving and restoring
# of state tables at shutdown and boot
ipfs_program="/sbin/ipfs" # where the ipfs program lives
ipfs_flags="" # additional flags for ipfs
pf_enable="NO" # Set to YES to enable packet filter (pf)
pf_rules="/etc/pf.conf" # rules definition file for pf
pf_program="/sbin/pfctl" # where the pfctl program lives
pf_flags="" # additional flags for pfctl
pflog_enable="NO" # Set to YES to enable packet filter logging
pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
pflog_program="/sbin/pflogd" # where the pflogd program lives
pflog_flags="" # additional flags for pflogd
ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
ftpproxy_flags="" # additional flags for ftp-proxy(8)
pfsync_enable="NO" # Expose pf state to other hosts for syncing
pfsync_syncdev="" # Interface for pfsync to work through
pfsync_syncpeer="" # IP address of pfsync peer host
pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
log_in_vain="0" # >=1 to log connects to ports w/o listeners.
tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
# NOTE: this violates the TCP specification
icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
network_interfaces="auto" # List of network interfaces (or "auto").
cloned_interfaces="" # List of cloned network interfaces to create.
#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
#ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
#vlans_fxp0="101 vlan0" # vlan(4) interfaces for fxp0 device
#create_args_vlan0="vlan 102" # vlan tag for vlan0 device
#wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
#wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlandebug(8)
#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
#
#autobridge_interfaces="bridge0" # List of bridges to check
#autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
#
# If you have any sppp(4) interfaces above, you might also want to set
# the following parameters. Refer to spppcontrol(8) for their meaning.
sppp_interfaces="" # List of sppp interfaces.
#sppp_interfaces="...0" # example: sppp over ...
#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
# User ppp configuration.
ppp_enable="NO" # Start user-ppp (or NO).
ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
# For details see man page for ppp(8). Default is auto.
ppp_nat="YES" # Use PPP's internal network address translation or NO.
ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
ppp_user="root" # Which user to run ppp as
# Start multiple instances of ppp at boot time
#ppp_profile="profile1 profile2 profile3" # Which profiles to use
#ppp_profile1_mode="ddial" # Override ppp mode for profile1
#ppp_profile2_nat="NO" # Override nat mode for profile2
# profile3 uses default ppp_mode and ppp_nat
### Network daemon (miscellaneous) ###
hostapd_enable="NO" # Run hostap daemon.
syslogd_enable="YES" # Run syslog daemon (or NO).
syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
syslogd_flags="-s" # Flags to syslogd (if enabled).
syslogd_oomprotect="YES" # Don't kill syslogd when swap space is exhausted.
altlog_proglist="" # List of chrooted applicatioins in /var
inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
inetd_flags="-wW -C 60" # Optional flags to inetd
iscsid_enable="NO" # iSCSI initiator daemon.
iscsictl_enable="NO" # iSCSI initiator autostart.
iscsictl_flags="-Aa" # Optional flags to iscsictl.
hastd_enable="NO" # Run the HAST daemon (YES/NO).
hastd_program="/sbin/hastd" # path to hastd, if you want a different one.
hastd_flags="" # Optional flags to hastd.
ctld_enable="NO" # CAM Target Layer / iSCSI target daemon.
local_unbound_enable="NO" # local caching resolver
#
# kerberos. Do not run the admin daemons on slave servers
#
kdc_enable="NO" # Run a kerberos 5 KDC (or NO).
kdc_program="/usr/libexec/kdc" # path to kerberos 5 KDC
kdc_flags="" # Additional flags to the kerberos 5 KDC
kadmind_enable="NO" # Run kadmind (or NO)
kadmind_program="/usr/libexec/kadmind" # path to kadmind
kpasswdd_enable="NO" # Run kpasswdd (or NO)
kpasswdd_program="/usr/libexec/kpasswdd" # path to kpasswdd
kfd_enable="NO" # Run kfd (or NO)
kfd_program="/usr/libexec/kfd" # path to kerberos 5 kfd daemon
kfd_flags=""
ipropd_master_enable="NO" # Run Heimdal incremental propagation daemon
# (master daemon).
ipropd_master_program="/usr/libexec/ipropd-master"
ipropd_master_flags="" # Flags to ipropd-master.
ipropd_master_keytab="/etc/krb5.keytab" # keytab for ipropd-master.
ipropd_master_slaves="" # slave node names used for /var/heimdal/slaves.
ipropd_slave_enable="NO" # Run Heimdal incremental propagation daemon
# (slave daemon).
ipropd_slave_program="/usr/libexec/ipropd-slave"
ipropd_slave_flags="" # Flags to ipropd-slave.
ipropd_slave_keytab="/etc/krb5.keytab" # keytab for ipropd-slave.
ipropd_slave_master="" # master node name.
gssd_enable="NO" # Run the gssd daemon (or NO).
gssd_program="/usr/sbin/gssd" # Path to gssd.
gssd_flags="" # Flags for gssd.
rwhod_enable="NO" # Run the rwho daemon (or NO).
rwhod_flags="" # Flags for rwhod
rarpd_enable="NO" # Run rarpd (or NO).
rarpd_flags="-a" # Flags to rarpd.
bootparamd_enable="NO" # Run bootparamd (or NO).
bootparamd_flags="" # Flags to bootparamd
pppoed_enable="NO" # Run the PPP over Ethernet daemon.
pppoed_provider="*" # Provider and ppp(8) config file entry.
pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
pppoed_interface="fxp0" # The interface that pppoed runs on.
sshd_enable="NO" # Enable sshd
sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
sshd_flags="" # Additional flags for sshd.
ftpd_enable="NO" # Enable stand-alone ftpd.
ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
ftpd_flags="" # Additional flags to stand-alone ftpd.
### Network daemon (NFS): All need rpcbind_enable="YES" ###
amd_enable="NO" # Run amd service with $amd_flags (or NO).
amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
amd_map_program="NO" # Can be set to "ypcat -k amd.master"
autofs_enable="NO" # Run autofs daemons.
automount_flags="" # Flags to automount(8) (if autofs enabled).
automountd_flags="" # Flags to automountd(8) (if autofs enabled).
autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled).
nfs_client_enable="NO" # This host is an NFS client (or NO).
nfs_access_cache="60" # Client cache timeout in seconds
nfs_server_enable="NO" # This host is an NFS server (or NO).
nfs_server_flags="-u -t" # Flags to nfsd (if enabled).
nfs_server_managegids="NO" # The NFS server maps gids for AUTH_SYS (or NO).
mountd_enable="NO" # Run mountd (or NO).
mountd_flags="-r" # Flags to mountd (if NFS server enabled).
weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
nfs_bufpackets="" # bufspace (in packets) for client
rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
rpc_statd_flags="" # Flags to rpc.statd (if enabled).
rpcbind_enable="NO" # Run the portmapper service (YES/NO).
rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
rpcbind_flags="" # Flags to rpcbind (if enabled).
rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
keyserv_flags="" # Flags to keyserv (if enabled).
nfsv4_server_enable="NO" # Enable support for NFSv4
nfscbd_enable="NO" # NFSv4 client side callback daemon
nfscbd_flags="" # Flags for nfscbd
nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
nfsuserd_flags="" # Flags for nfsuserd
### Network Time Services options: ###
timed_enable="NO" # Run the time daemon (or NO).
timed_flags="" # Flags to timed (if enabled).
ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
ntpdate_flags="-b" # Flags to ntpdate (if enabled).
ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
# Flags to ntpd (if enabled).
ntp_src_leapfile="/etc/ntp/leap-seconds"
# Initial source for ntpd leapfile
ntp_db_leapfile="/var/db/ntpd.leap-seconds.list"
# Working copy (updated weekly) leapfile
ntp_leapfile_sources="https://www.ietf.org/timezones/data/leap-seconds.list"
# Source from which to fetch leapfile
ntp_leapfile_fetch_opts="-mq" # Options to use for ntp leapfile fetch,
# e.g. --no-verify-peer
ntp_leapfile_expiry_days=30 # Check for new leapfile 30 days prior to
# expiry.
ntp_leapfile_fetch_verbose="NO" # Be verbose during NTP leapfile fetch
# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
nis_client_enable="NO" # We're an NIS client (or NO).
nis_client_flags="" # Flags to ypbind (if enabled).
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
nis_ypset_flags="" # Flags to ypset (if enabled).
nis_server_enable="NO" # We're an NIS server (or NO).
nis_server_flags="" # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
### SNMP daemon ###
# Be sure to understand the security implications of running SNMP v1/v2
# in your network.
bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
bsnmpd_flags="" # Flags for bsnmpd.
### Network routing options: ###
defaultrouter="NO" # Set to default gateway (or NO).
static_arp_pairs="" # Set to static ARP list (or leave empty).
static_ndp_pairs="" # Set to static NDP list (or leave empty).
static_routes="" # Set to static route list (or leave empty).
natm_static_routes="" # Set to static route list for NATM (or leave empty).
gateway_enable="NO" # Set to YES if this host will be a gateway.
routed_enable="NO" # Set to YES to enable a routing daemon.
routed_program="/sbin/routed" # Name of routing daemon to use if enabled.
routed_flags="-q" # Flags for routing daemon.
arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
accept_sourceroute="NO" # accept source routed packets to us
### ATM interface options: ###
atm_enable="NO" # Configure ATM interfaces (or NO).
#atm_netif_hea0="atm 1" # Network interfaces for physical interface.
#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
#atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
atm_pvcs="" # Set to PVC list (or leave empty).
atm_arps="" # Set to permanent ARP list (or leave empty).
### Bluetooth ###
hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
sdpd_enable="NO" # Enable sdpd(8) (or NO)
sdpd_control="/var/run/sdp" # sdpd(8) control socket
sdpd_groupname="nobody" # set spdp(8) user/group to run as after
sdpd_username="nobody" # it initializes
bthidd_enable="NO" # Enable bthidd(8) (or NO)
bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
#
#rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
#rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
#rfcomm_pppd_server_one_register_dun="NO" # for 'one'
#
#rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
#rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
#rfcomm_pppd_server_two_register_dun="NO" # for 'two'
ubthidhci_enable="NO" # Switch an USB BT controller present on
#ubthidhci_busnum="3" # bus 3 and addr 2 from HID mode to HCI mode.
#ubthidhci_addr="2" # Check usbconfig list to find the correct
# numbers for your system.
### Network link/usability verification options
netwait_enable="NO" # Enable rc.d/netwait (or NO)
#netwait_ip="" # Wait for ping response from any IP in this list.
netwait_timeout="60" # Total number of seconds to perform pings.
#netwait_if="" # Wait for active link on each intf in this list.
netwait_if_timeout="30" # Total number of seconds to monitor link state.
### Miscellaneous network options: ###
icmp_bmcastecho="NO" # respond to broadcast ping packets
### IPv6 options: ###
ipv6_network_interfaces="auto" # List of IPv6 network interfaces
# (or "auto" or "none").
ipv6_activate_all_interfaces="NO" # If NO, interfaces which have no
# corresponding $ifconfig_IF_ipv6 is
# marked as IFDISABLED for security
# reason.
ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
ipv6_static_routes="" # Set to static route list (or leave empty).
#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
# route toward loopback interface.
#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
ipv6_cpe_wanif="NO" # Set to the upstram interface name if this
# node will work as a router to forward IPv6
# packets not explicitly addressed to itself.
ipv6_privacy="NO" # Use privacy address on RA-receiving IFs
# (RFC 4941)
route6d_enable="NO" # Set to YES to enable an IPv6 routing daemon.
route6d_program="/usr/sbin/route6d" # Name of IPv6 routing daemon.
route6d_flags="" # Flags to IPv6 routing daemon.
#route6d_flags="-l" # Example for route6d with only IPv6 site local
# addrs.
#route6d_flags="-q" # If you want to run a routing daemon on an end
# node, you should stop advertisement.
#ipv6_network_interfaces="ed0 ep0" # Examples for router
# or static configuration for end node.
# Choose correct prefix value.
#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
ipv6_default_interface="NO" # Default output interface for scoped addrs.
# This works only with
# ipv6_gateway_enable="NO".
rtsol_flags="" # Flags to IPv6 router solicitation.
rtsold_enable="NO" # Set to YES to enable an IPv6 router
# solicitation daemon.
rtsold_flags="-a" # Flags to an IPv6 router solicitation
# daemon.
rtadvd_enable="NO" # Set to YES to enable an IPv6 router
# advertisement daemon. If set to YES,
# this router becomes a possible candidate
# IPv6 default router for local subnets.
rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
mroute6d_enable="NO" # Do IPv6 multicast routing.
mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
# routing daemon. You need to
# install it from package or
# port.
mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
# tunneling interface. Specify this entry
# to enable 6to4 interface.
stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
# to limit peer addr range. Effective value
# is 0-31.
stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
# If you like, you can set "AUTO" for this.
stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
# communication. (like ::ffff:a.b.c.d)
ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
# see /usr/src/contrib/ipfilter/rules
# for examples
ip6addrctl_enable="YES" # Set to YES to enable default address selection
ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
ip6addrctl_policy="AUTO" # A pre-defined address selection policy
# (ipv4_prefer, ipv6_prefer, or AUTO)
##############################################################
### System console options #################################
##############################################################
keyboard="" # keyboard device to use (default /dev/kbd0).
keymap="NO" # keymap in /usr/share/{syscons,vt}/keymaps/* (or NO).
keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
keychange="NO" # function keys default values (or NO).
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO" # font 8x16 from /usr/share/{syscons,vt}/fonts/* (or NO).
font8x14="NO" # font 8x14 from /usr/share/{syscons,vt}/fonts/* (or NO).
font8x8="NO" # font 8x8 from /usr/share/{syscons,vt}/fonts/* (or NO).
blanktime="300" # blank time (in seconds) or "NO" to turn it off.
saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
# specifically overriden in rc.conf(5).
moused_enable="NO" # Run the mouse daemon.
moused_type="auto" # See man page for rc.conf(5) for available settings.
moused_port="/dev/psm0" # Set to your mouse port.
moused_flags="" # Any additional flags to moused.
mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
# language code table, specify alternative range
# start like mousechar_start=3, see vidcontrol(1)
allscreens_flags="" # Set this vidcontrol mode for all virtual screens
allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
##############################################################
### Mail Transfer Agent (MTA) options ######################
##############################################################
mta_start_script="/etc/rc.sendmail"
# Script to start your chosen MTA, called by /etc/rc.
# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
sendmail_procname="/usr/sbin/sendmail" # sendmail process name
sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
sendmail_cert_create="YES" # Create a server certificate if none (YES/NO)
#sendmail_cert_cn="CN" # CN of the generate certificate
sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
# Flags for localhost-only MTA
sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
# Flags for sendmail_msp_queue daemon.
sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
##############################################################
### Miscellaneous administrative options ###################
##############################################################
auditd_enable="NO" # Run the audit daemon.
auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
auditd_flags="" # Which options to pass to the audit daemon.
auditdistd_enable="NO" # Run the audit daemon.
auditdistd_program="/usr/sbin/auditdistd" # Path to the auditdistd daemon.
auditdistd_flags="" # Which options to pass to the auditdistd daemon.
cron_enable="YES" # Run the periodic job daemon.
cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
cron_flags="" # Which options to pass to the cron daemon.
lpd_enable="NO" # Run the line printer daemon.
lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
lpd_flags="" # Flags to lpd (if enabled).
nscd_enable="NO" # Run the nsswitch caching daemon.
chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
chkprintcap_flags="-d" # Create missing directories by default.
dumpdev="AUTO" # Device to crashdump to (device name, AUTO, or NO).
dumpdir="/var/crash" # Directory where crash dumps are to be stored
savecore_enable="YES" # Extract core from dump devices if any
savecore_flags="-m 10" # Used if dumpdev is enabled above, and present.
# By default, only the 10 most recent kernel dumps
# are saved.
crashinfo_enable="YES" # Automatically generate crash dump summary.
crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
quota_enable="NO" # turn on quotas on startup (or NO).
check_quotas="YES" # Check quotas on startup (or NO).
quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
quotacheck_flags="-a" # Check all file system quotas (if enabled)
accounting_enable="NO" # Turn on process accounting (or NO).
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if
# this file exists. Should be on a R/W filesystem so
# the file can be deleted after the boot completes.
# Emulation/compatibility services provided by /etc/rc.d/abi
sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
clear_tmp_enable="NO" # Clear /tmp at startup.
clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
# shared library search paths
ldconfig32_paths="/usr/lib32 /usr/lib32/compat"
# 32-bit compatibility shared library search paths
ldconfigsoft_paths="/usr/libsoft /usr/libsoft/compat /usr/local/libsoft"
# soft float compatibility shared library search paths
# Note: temporarily with extra stuff for transition
ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
# a.out shared library search paths
ldconfig_local_dirs="/usr/local/libdata/ldconfig"
# Local directories with ldconfig configuration files.
ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
# Local directories with 32-bit compatibility ldconfig
# configuration files.
ldconfig_localsoft_dirs="/usr/local/libdata/ldconfigsoft"
# Local directories with soft float compatibility ldconfig
# configuration files.
kern_securelevel_enable="NO" # kernel security level (see security(7))
kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
# Note that setting securelevel to 0 will result
# in the system booting with securelevel set to 1, as
# init(8) will raise the level when rc(8) completes.
update_motd="YES" # update version info in /etc/motd (or NO)
entropy_boot_file="/boot/entropy" # Set to NO to disable very early
# (used at early boot time) entropy caching through reboots.
entropy_file="/entropy" # Set to NO to disable late (used when going multi-user)
# entropy through reboots.
# /var/db/entropy-file is preferred if / is not avail.
entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
entropy_save_sz="4096" # Size of the entropy cache files.
entropy_save_num="8" # Number of entropy cache files to save.
harvest_mask="511" # Entropy device harvests all but the very invasive sources.
# (See 'sysctl kern.random.harvest' and random(4))
dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
watchdogd_enable="NO" # Start the software watchdog daemon
watchdogd_flags="" # Flags to watchdogd (if enabled)
devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
# devfs(8) rules.
devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
# apply (must be mounted already, i.e. fstab(5))
devfs_load_rulesets="YES" # Enable to always load the default rulesets
performance_cx_lowest="C2" # Online CPU idle state
performance_cpu_freq="NONE" # Online CPU frequency
economy_cx_lowest="Cmax" # Offline CPU idle state
economy_cpu_freq="NONE" # Offline CPU frequency
virecover_enable="YES" # Perform housekeeping for the vi(1) editor
ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
# ruleset file.
newsyslog_enable="YES" # Run newsyslog at startup.
newsyslog_flags="-CN" # Newsyslog flags to create marked files
mixer_enable="YES" # Run the sound mixer.
opensm_enable="NO" # Opensm(8) for infiniband devices defaults to off
# rctl(8) requires kernel options RACCT and RCTL
rctl_enable="YES" # Load rctl(8) rules on boot
rctl_rules="/etc/rctl.conf" # rctl(8) ruleset. See rctl.conf(5).
iovctl_files="" # Config files for iovctl(8)
##############################################################
### Jail Configuration (see rc.conf(5) manual page) ##########
##############################################################
jail_enable="NO" # Set to NO to disable starting of any jails
jail_parallel_start="NO" # Start jails in the background
jail_list="" # Space separated list of names of jails
jail_reverse_stop="NO" # Stop jails in reverse order
##############################################################
### Define source_rc_confs, the mechanism used by /etc/rc.* ##
### scripts to source rc_conf_files overrides safely. ##
##############################################################
if [ -z "${source_rc_confs_defined}" ]; then
source_rc_confs_defined=yes
source_rc_confs() {
local i sourced_files
for i in ${rc_conf_files}; do
case ${sourced_files} in
*:$i:*)
;;
*)
sourced_files="${sourced_files}:$i:"
if [ -r $i ]; then
. $i
fi
;;
esac
done
# Re-do process to pick up [possibly] redefined $rc_conf_files
for i in ${rc_conf_files}; do
case ${sourced_files} in
*:$i:*)
;;
*)
sourced_files="${sourced_files}:$i:"
if [ -r $i ]; then
. $i
fi
;;
esac
done
}
fi