freebsd-dev/usr.sbin/sendmail/contrib/mailprio
Peter Wemm 58162a7314 Import Sendmail-8.7.2 as discussed on -current.
The conflict merge will happen shortly after.
1995-12-02 17:30:23 +00:00

298 lines
11 KiB
Plaintext

Message-Id: <199412081919.NAA23234@austin.BSDI.COM>
To: Eric Allman <eric@cs.berkeley.edu>
Subject: Re: sorting mailings lists with fastest delivery users first
In-reply-to: Your message of Thu, 08 Dec 1994 06:08:33 PST.
References: <199412081408.GAA06210@mastodon.CS.Berkeley.EDU>
From: Tony Sanders <sanders@bsdi.com>
Organization: Berkeley Software Design, Inc.
Date: Thu, 08 Dec 1994 13:19:39 -0600
Sender: sanders@austin.BSDI.COM
Eric Allman writes:
> Nope, that's a new one, so far as I know. Any interest in
> contributing it? For small lists it seems overkill, but for
> large lists it could be a major win.
Sure, I will contribute it; after I sent you mail last night I went ahead
and finished up what I thought needed to be done. I would like to get
some feedback from you on a few items, if you have time.
There are two programs, mailprio_mkdb and mailprio (source below).
mailprio_mkdb reads maillog files and creates a DB file of address vs.
delay. I'm not too happy with how it does the averages right now but this
is just a quick hack. However, it should at least order sites that take
days vs. those that deliver on the first pass through. One thing that
would make this information a lot more accurate is if sendmail could log
a "transaction delay" (on failures also), as well as total delivery delay.
Perhaps, as an option, it could maintain the DB file itself?
mailprio then simply reads a list of addresses from stdin (the mailing
list), and tries to prioritize them according to the info the database.
It collects comment lines and other junk at the top of the file; all
mailprio does is reorder lines, the actual text of the file should
be unchanged to the extent that you can verify it with:
sort sorted_list > checkit; sort mailing-list | diff - checkit
Users with no delay information are put next. The prioritized list is last.
Of course, this function could also be built-into sendmail (eventually).
Putting "new account" info at the top with the current averaging function
probably adversly affects the prioritized list (at least in the short
term), but putting it at the bottom would not really give the new accounts
a fair chance. I suspect this isn't that big of a problem. I'm running
this here on a list with 461 accounts and about 10 messages per day so
I'll see how it goes. I'll keep some stats on delay times and see what
happens.
Another thing that would help this situation, is if sendmail had the queue
ordered by site (but you already know this). If you ever get to do per
site queuing you should consider "blocking" a queue for some short period
of time if a connection fails to that site [sendmail does this inside a
single process on a per account basis now right?]; this would allow multiple
sendmails to quickly skip over those sites for people like me that run:
for i in 1 2 3 4 5 6 7 8 ; do daemon sendmail -q; done
to flush a queue that has gotten behind. You could also do this inside
sendmail with a parallelism option (when it is time to run the queue, how
many processes to start).
#! /bin/sh
# This is a shell archive. Remove anything before this line, then unpack
# it by saving it into a file and typing "sh file". To overwrite existing
# files, type "sh file -c". You can also feed this as standard input via
# unshar, or by typing "sh <file", e.g.. If this archive is complete, you
# will see the following message at the end:
# "End of shell archive."
# Contents: mailprio mailprio_mkdb
# Wrapped by sanders@austin.BSDI.COM on Fri Dec 9 18:07:02 1994
PATH=/bin:/usr/bin:/usr/ucb ; export PATH
if test -f 'mailprio' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'mailprio'\"
else
echo shar: Extracting \"'mailprio'\" \(3093 characters\)
sed "s/^X//" >'mailprio' <<'END_OF_FILE'
X#!/usr/bin/perl
X#
X# mailprio -- setup mail priorities for a mailing list
X#
X# Sort mailing list by mailprio database:
X# mailprio < mailing-list > sorted_list
X# Double check against orig:
X# sort sorted_list > checkit; sort mailing-list | diff - checkit
X# If it checks out, install it.
X#
X# TODO:
X# option to process mqueue files so we can reorder files in the queue!
X$usage = "Usage: mailprio [-p priodb]\n";
X$home = "/home/sanders/lists";
X$priodb = "$home/mailprio";
X
Xif ($main'ARGV[0] =~ /^-/) {
X $args = shift;
X if ($args =~ m/\?/) { print $usage; exit 0; }
X if ($args =~ m/p/) {
X $priodb = shift || die $usage, "-p requires argument\n"; }
X}
X
X# In shell script, it goes something like this:
X# old_mailprio > /tmp/a
X# fgrep -f lists/inet-access /tmp/a | sed -e 's/^.......//' > /tmp/b
X# ; /tmp/b contains list of known users, faster delivery first
X# fgrep -v -f /tmp/b lists/inet-access > /tmp/c
X# ; put all unknown stuff at the top of new list for now
X# echo '# -----' >> /tmp/c
X# cat /tmp/b >> /tmp/c
X
X# Setup %list and @list
Xlocal($addr, $canon);
Xwhile ($addr = <STDIN>) {
X chop $addr;
X next if $addr =~ /^# ----- /; # that's our line
X push(@list, $addr), next if $addr =~ /^\s*#/; # save comments
X $canon = &canonicalize((&simplify_address($addr))[0]);
X unless (defined $canon) {
X warn "no address found: $addr\n";
X push(@list, $addr); # save it anyway
X next;
X }
X if (defined $list{$canon}) {
X warn "duplicate: ``$addr -> $canon''\n";
X push(@list, $addr); # save it anyway
X next;
X }
X $list{$canon} = $addr;
X}
X
Xlocal(*prio);
Xdbmopen(%prio, $priodb, 0644) || die "$priodb: $!\n";
Xforeach $to (keys %list) {
X if (defined $prio{$to}) {
X # add to list of found users (%userprio) and remove from %list
X # so that we know what users were not yet prioritized
X $userprio{$to} = $prio{$to}; # priority
X $useracct{$to} = $list{$to}; # string
X delete $list{$to};
X }
X}
Xdbmclose(%prio);
X
X# Put all the junk we found at the very top
X# (this might not always be a feature)
Xprint join("\n", @list), "\n";
X
X# unprioritized users go next, slow accounts will get moved down quickly
Xprint '# ----- unprioritized users', "\n";
Xforeach $to (keys %list) { print $list{$to}, "\n"; }
X
X# finally, our prioritized list of users
Xprint '# ----- prioritized users', "\n";
Xforeach $to (sort { $userprio{$a} <=> $userprio{$b}; } keys %userprio) {
X die "Opps! Something is seriously wrong with useracct: $to\n"
X unless defined $useracct{$to};
X print $useracct{$to}, "\n";
X}
X
Xexit(0);
X
X# REPL-LIB ---------------------------------------------------------------
X
Xsub canonicalize {
X local($addr) = @_;
X # lowercase, strip leading/trailing whitespace
X $addr =~ y/A-Z/a-z/; $addr =~ s/^\s+//; $addr =~ s/\s+$//; $addr;
X}
X
X# @addrs = simplify_address($addr);
Xsub simplify_address {
X local($_) = shift;
X 1 while s/\([^\(\)]*\)//g; # strip comments
X 1 while s/"[^"]*"//g; # strip comments
X split(/,/); # split into parts
X foreach (@_) {
X 1 while s/.*<(.*)>.*/\1/;
X s/^\s+//;
X s/\s+$//;
X }
X @_;
X}
END_OF_FILE
if test 3093 -ne `wc -c <'mailprio'`; then
echo shar: \"'mailprio'\" unpacked with wrong size!
fi
chmod +x 'mailprio'
# end of 'mailprio'
fi
if test -f 'mailprio_mkdb' -a "${1}" != "-c" ; then
echo shar: Will not clobber existing file \"'mailprio_mkdb'\"
else
echo shar: Extracting \"'mailprio_mkdb'\" \(3504 characters\)
sed "s/^X//" >'mailprio_mkdb' <<'END_OF_FILE'
X#!/usr/bin/perl
X#
X# mailprio_mkdb -- make mail priority database based on delay times
X#
X$usage = "Usage: mailprio_mkdb [-l maillog] [-p priodb]\n";
X$home = "/home/sanders/lists";
X$maillog = "/var/log/maillog";
X$priodb = "$home/mailprio";
X
Xif ($main'ARGV[0] =~ /^-/) {
X $args = shift;
X if ($args =~ m/\?/) { print $usage; exit 0; }
X if ($args =~ m/l/) {
X $maillog = shift || die $usage, "-l requires argument\n"; }
X if ($args =~ m/p/) {
X $priodb = shift || die $usage, "-p requires argument\n"; }
X}
X
Xlocal(*prio);
X# We'll merge with existing information if it's already there.
Xdbmopen(%prio, $priodb, 0644) || die "$priodb: $!\n";
X&getlog_stats($maillog, *prio);
X# foreach $addr (sort { $prio{$a} <=> $prio{$b}; } keys %prio) {
X# printf("%06d %s\n", $prio{$addr}, $addr); }
Xdbmclose(%prio);
Xexit(0);
X
Xsub getlog_stats {
X local($maillog, *stats) = @_;
X local($to, $delay);
X local($h, $m, $s);
X open(MAILLOG, "< $maillog") || die "$maillog: $!\n";
X while (<MAILLOG>) {
X ($delay) = (m/, delay=([^,]*), /);
X $delay || next;
X ($h, $m, $s) = split(/:/, $delay);
X $delay = ($h * 60 * 60) + ($m * 60) + $s;
X
X # deleting everything after ", " seems safe enough, though
X # it is possible that it was inside "..."'s and that we will
X # miss some addresses because of it. However, I'm not willing
X # to do full parsing just for that case. If this bothers you
X # you could do something like: s/, (delay|ctladdr)=.*//;
X # but you have to make sure you catch all the possible names.
X $to = $_; $to =~ s/^.* to=//; $to =~ s/, .*//;
X foreach $addr (&simplify_address($to)) {
X next unless $addr;
X $addr = &canonicalize($addr);
X # print $delay, " ", $addr, "\n";
X $stats{$addr} = $delay unless defined $stats{$addr}; # init
X
X # This average function moves the value around quite rapidly
X # which may or may not be a feature.
X #
X # This has at least one odd behavior because we currently only
X # use the delay information from maillog which is only logged
X # on actual delivery. This works backwards from what we really
X # want to happen when a fast host goes down for a while and then
X # comes back up.
X #
X # I spoke with Eric and he suggested adding an xdelay statistic
X # for a per transaction delay which would help that situation
X # a lot. What I believe you want in that cases something like:
X # delay fast, xdelay fast: smokin', these hosts go first
X # delay slow, xdelay fast: put host high on the list (back up?)
X # delay fast, xdelay slow: host is down/having problems/slow
X # delay slow, xdelay slow: poorly connected sites, very last
X # Of course, you have to reorder the distribution list fairly
X # often for that to help. Come to think of it, you should
X # also reorder /var/spool/mqueue files also (if they aren't
X # locked of course). Hmmm....
X $stats{$addr} = int(($stats{$addr} + $delay) / 2);
X }
X }
X close(MAILLOG);
X}
X
X# REPL-LIB ---------------------------------------------------------------
X
Xsub canonicalize {
X local($addr) = @_;
X # lowercase, strip leading/trailing whitespace
X $addr =~ y/A-Z/a-z/; $addr =~ s/^\s+//; $addr =~ s/\s+$//; $addr;
X}
X
X# @addrs = simplify_address($addr);
Xsub simplify_address {
X local($_) = shift;
X 1 while s/\([^\(\)]*\)//g; # strip comments
X 1 while s/"[^"]*"//g; # strip comments
X split(/,/); # split into parts
X foreach (@_) {
X 1 while s/.*<(.*)>.*/\1/;
X s/^\s+//;
X s/\s+$//;
X }
X @_;
X}
END_OF_FILE
if test 3504 -ne `wc -c <'mailprio_mkdb'`; then
echo shar: \"'mailprio_mkdb'\" unpacked with wrong size!
fi
chmod +x 'mailprio_mkdb'
# end of 'mailprio_mkdb'
fi
echo shar: End of shell archive.
exit 0