987 lines
28 KiB
C
987 lines
28 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause
|
|
*
|
|
* Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/ctype.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/sema.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <vm/uma.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-pci.h>
|
|
#include <ata_if.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
|
|
/* prototypes */
|
|
static int ata_generic_status(device_t dev);
|
|
static int ata_wait(struct ata_channel *ch, int unit, u_int8_t);
|
|
static void ata_pio_read(struct ata_request *, int);
|
|
static void ata_pio_write(struct ata_request *, int);
|
|
static void ata_tf_read(struct ata_request *);
|
|
static void ata_tf_write(struct ata_request *);
|
|
|
|
/*
|
|
* low level ATA functions
|
|
*/
|
|
void
|
|
ata_generic_hw(device_t dev)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
ch->hw.begin_transaction = ata_begin_transaction;
|
|
ch->hw.end_transaction = ata_end_transaction;
|
|
ch->hw.status = ata_generic_status;
|
|
ch->hw.softreset = NULL;
|
|
ch->hw.command = ata_generic_command;
|
|
ch->hw.tf_read = ata_tf_read;
|
|
ch->hw.tf_write = ata_tf_write;
|
|
ch->hw.pm_read = NULL;
|
|
ch->hw.pm_write = NULL;
|
|
}
|
|
|
|
/* must be called with ATA channel locked and state_mtx held */
|
|
int
|
|
ata_begin_transaction(struct ata_request *request)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
int dummy, error;
|
|
|
|
ATA_DEBUG_RQ(request, "begin transaction");
|
|
|
|
/* disable ATAPI DMA writes if HW doesn't support it */
|
|
if ((ch->flags & ATA_NO_ATAPI_DMA) &&
|
|
(request->flags & ATA_R_ATAPI) == ATA_R_ATAPI)
|
|
request->flags &= ~ATA_R_DMA;
|
|
if ((ch->flags & ATA_ATAPI_DMA_RO) &&
|
|
((request->flags & (ATA_R_ATAPI | ATA_R_DMA | ATA_R_WRITE)) ==
|
|
(ATA_R_ATAPI | ATA_R_DMA | ATA_R_WRITE)))
|
|
request->flags &= ~ATA_R_DMA;
|
|
|
|
switch (request->flags & (ATA_R_ATAPI | ATA_R_DMA)) {
|
|
/* ATA PIO data transfer and control commands */
|
|
default:
|
|
{
|
|
/* record command direction here as our request might be gone later */
|
|
int write = (request->flags & ATA_R_WRITE);
|
|
|
|
/* issue command */
|
|
if (ch->hw.command(request)) {
|
|
device_printf(request->parent, "error issuing %s command\n",
|
|
ata_cmd2str(request));
|
|
request->result = EIO;
|
|
goto begin_finished;
|
|
}
|
|
|
|
/* device reset doesn't interrupt */
|
|
if (request->u.ata.command == ATA_DEVICE_RESET) {
|
|
int timeout = 1000000;
|
|
do {
|
|
DELAY(10);
|
|
request->status = ATA_IDX_INB(ch, ATA_STATUS);
|
|
} while (request->status & ATA_S_BUSY && timeout--);
|
|
if (request->status & ATA_S_ERROR)
|
|
request->error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
ch->hw.tf_read(request);
|
|
goto begin_finished;
|
|
}
|
|
|
|
/* if write command output the data */
|
|
if (write) {
|
|
if (ata_wait(ch, request->unit, (ATA_S_READY | ATA_S_DRQ)) < 0) {
|
|
device_printf(request->parent,
|
|
"timeout waiting for write DRQ\n");
|
|
request->result = EIO;
|
|
goto begin_finished;
|
|
}
|
|
ata_pio_write(request, request->transfersize);
|
|
}
|
|
}
|
|
goto begin_continue;
|
|
|
|
/* ATA DMA data transfer commands */
|
|
case ATA_R_DMA:
|
|
/* check sanity, setup SG list and DMA engine */
|
|
if ((error = ch->dma.load(request, NULL, &dummy))) {
|
|
device_printf(request->parent, "setting up DMA failed\n");
|
|
request->result = error;
|
|
goto begin_finished;
|
|
}
|
|
|
|
/* start DMA engine if necessary */
|
|
if ((ch->flags & ATA_DMA_BEFORE_CMD) &&
|
|
ch->dma.start && ch->dma.start(request)) {
|
|
device_printf(request->parent, "error starting DMA\n");
|
|
request->result = EIO;
|
|
goto begin_finished;
|
|
}
|
|
|
|
/* issue command */
|
|
if (ch->hw.command(request)) {
|
|
device_printf(request->parent, "error issuing %s command\n",
|
|
ata_cmd2str(request));
|
|
request->result = EIO;
|
|
goto begin_finished;
|
|
}
|
|
|
|
/* start DMA engine */
|
|
if (!(ch->flags & ATA_DMA_BEFORE_CMD) &&
|
|
ch->dma.start && ch->dma.start(request)) {
|
|
device_printf(request->parent, "error starting DMA\n");
|
|
request->result = EIO;
|
|
goto begin_finished;
|
|
}
|
|
goto begin_continue;
|
|
|
|
/* ATAPI PIO commands */
|
|
case ATA_R_ATAPI:
|
|
/* is this just a POLL DSC command ? */
|
|
if (request->u.atapi.ccb[0] == ATAPI_POLL_DSC) {
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_DEV(request->unit));
|
|
DELAY(10);
|
|
if (!(ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_DSC))
|
|
request->result = EBUSY;
|
|
goto begin_finished;
|
|
}
|
|
|
|
/* start ATAPI operation */
|
|
if (ch->hw.command(request)) {
|
|
device_printf(request->parent, "error issuing ATA PACKET command\n");
|
|
request->result = EIO;
|
|
goto begin_finished;
|
|
}
|
|
goto begin_continue;
|
|
|
|
/* ATAPI DMA commands */
|
|
case ATA_R_ATAPI|ATA_R_DMA:
|
|
/* is this just a POLL DSC command ? */
|
|
if (request->u.atapi.ccb[0] == ATAPI_POLL_DSC) {
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_DEV(request->unit));
|
|
DELAY(10);
|
|
if (!(ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_DSC))
|
|
request->result = EBUSY;
|
|
goto begin_finished;
|
|
}
|
|
|
|
/* check sanity, setup SG list and DMA engine */
|
|
if ((error = ch->dma.load(request, NULL, &dummy))) {
|
|
device_printf(request->parent, "setting up DMA failed\n");
|
|
request->result = error;
|
|
goto begin_finished;
|
|
}
|
|
|
|
/* start ATAPI operation */
|
|
if (ch->hw.command(request)) {
|
|
device_printf(request->parent, "error issuing ATA PACKET command\n");
|
|
request->result = EIO;
|
|
goto begin_finished;
|
|
}
|
|
|
|
/* start DMA engine */
|
|
if (ch->dma.start && ch->dma.start(request)) {
|
|
request->result = EIO;
|
|
goto begin_finished;
|
|
}
|
|
goto begin_continue;
|
|
}
|
|
/* NOT REACHED */
|
|
printf("ata_begin_transaction OOPS!!!\n");
|
|
|
|
begin_finished:
|
|
if (ch->dma.unload) {
|
|
ch->dma.unload(request);
|
|
}
|
|
return ATA_OP_FINISHED;
|
|
|
|
begin_continue:
|
|
callout_reset(&request->callout, request->timeout * hz,
|
|
ata_timeout, request);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
/* must be called with ATA channel locked and state_mtx held */
|
|
int
|
|
ata_end_transaction(struct ata_request *request)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
int length;
|
|
|
|
ATA_DEBUG_RQ(request, "end transaction");
|
|
|
|
/* clear interrupt and get status */
|
|
request->status = ATA_IDX_INB(ch, ATA_STATUS);
|
|
|
|
switch (request->flags & (ATA_R_ATAPI | ATA_R_DMA | ATA_R_CONTROL)) {
|
|
/* ATA PIO data transfer and control commands */
|
|
default:
|
|
|
|
/* on timeouts we have no data or anything so just return */
|
|
if (request->flags & ATA_R_TIMEOUT)
|
|
goto end_finished;
|
|
|
|
/* Read back registers to the request struct. */
|
|
if ((request->status & ATA_S_ERROR) ||
|
|
(request->flags & (ATA_R_CONTROL | ATA_R_NEEDRESULT))) {
|
|
ch->hw.tf_read(request);
|
|
}
|
|
|
|
/* if we got an error we are done with the HW */
|
|
if (request->status & ATA_S_ERROR) {
|
|
request->error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
goto end_finished;
|
|
}
|
|
|
|
/* are we moving data ? */
|
|
if (request->flags & (ATA_R_READ | ATA_R_WRITE)) {
|
|
/* if read data get it */
|
|
if (request->flags & ATA_R_READ) {
|
|
int flags = ATA_S_DRQ;
|
|
|
|
if (request->u.ata.command != ATA_ATAPI_IDENTIFY)
|
|
flags |= ATA_S_READY;
|
|
if (ata_wait(ch, request->unit, flags) < 0) {
|
|
device_printf(request->parent,
|
|
"timeout waiting for read DRQ\n");
|
|
request->result = EIO;
|
|
goto end_finished;
|
|
}
|
|
ata_pio_read(request, request->transfersize);
|
|
}
|
|
|
|
/* update how far we've gotten */
|
|
request->donecount += request->transfersize;
|
|
|
|
/* do we need a scoop more ? */
|
|
if (request->bytecount > request->donecount) {
|
|
/* set this transfer size according to HW capabilities */
|
|
request->transfersize =
|
|
min((request->bytecount - request->donecount),
|
|
request->transfersize);
|
|
|
|
/* if data write command, output the data */
|
|
if (request->flags & ATA_R_WRITE) {
|
|
/* if we get an error here we are done with the HW */
|
|
if (ata_wait(ch, request->unit, (ATA_S_READY | ATA_S_DRQ)) < 0) {
|
|
device_printf(request->parent,
|
|
"timeout waiting for write DRQ\n");
|
|
request->status = ATA_IDX_INB(ch, ATA_STATUS);
|
|
goto end_finished;
|
|
}
|
|
|
|
/* output data and return waiting for new interrupt */
|
|
ata_pio_write(request, request->transfersize);
|
|
goto end_continue;
|
|
}
|
|
|
|
/* if data read command, return & wait for interrupt */
|
|
if (request->flags & ATA_R_READ)
|
|
goto end_continue;
|
|
}
|
|
}
|
|
/* done with HW */
|
|
goto end_finished;
|
|
|
|
/* ATA DMA data transfer commands */
|
|
case ATA_R_DMA:
|
|
|
|
/* stop DMA engine and get status */
|
|
if (ch->dma.stop)
|
|
request->dma->status = ch->dma.stop(request);
|
|
|
|
/* did we get error or data */
|
|
if (request->status & ATA_S_ERROR)
|
|
request->error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
else if (request->dma->status & ATA_BMSTAT_ERROR)
|
|
request->status |= ATA_S_ERROR;
|
|
else if (!(request->flags & ATA_R_TIMEOUT))
|
|
request->donecount = request->bytecount;
|
|
|
|
/* Read back registers to the request struct. */
|
|
if ((request->status & ATA_S_ERROR) ||
|
|
(request->flags & (ATA_R_CONTROL | ATA_R_NEEDRESULT))) {
|
|
ch->hw.tf_read(request);
|
|
}
|
|
|
|
/* release SG list etc */
|
|
ch->dma.unload(request);
|
|
|
|
/* done with HW */
|
|
goto end_finished;
|
|
|
|
/* ATAPI PIO commands */
|
|
case ATA_R_ATAPI:
|
|
length = ATA_IDX_INB(ch, ATA_CYL_LSB)|(ATA_IDX_INB(ch, ATA_CYL_MSB)<<8);
|
|
|
|
/* on timeouts we have no data or anything so just return */
|
|
if (request->flags & ATA_R_TIMEOUT)
|
|
goto end_finished;
|
|
|
|
switch ((ATA_IDX_INB(ch, ATA_IREASON) & (ATA_I_CMD | ATA_I_IN)) |
|
|
(request->status & ATA_S_DRQ)) {
|
|
case ATAPI_P_CMDOUT:
|
|
/* this seems to be needed for some (slow) devices */
|
|
DELAY(10);
|
|
|
|
if (!(request->status & ATA_S_DRQ)) {
|
|
device_printf(request->parent, "command interrupt without DRQ\n");
|
|
request->status = ATA_S_ERROR;
|
|
goto end_finished;
|
|
}
|
|
ATA_IDX_OUTSW_STRM(ch, ATA_DATA, (int16_t *)request->u.atapi.ccb,
|
|
(request->flags & ATA_R_ATAPI16) ? 8 : 6);
|
|
/* return wait for interrupt */
|
|
goto end_continue;
|
|
|
|
case ATAPI_P_WRITE:
|
|
if (request->flags & ATA_R_READ) {
|
|
request->status = ATA_S_ERROR;
|
|
device_printf(request->parent,
|
|
"%s trying to write on read buffer\n",
|
|
ata_cmd2str(request));
|
|
goto end_finished;
|
|
}
|
|
ata_pio_write(request, length);
|
|
request->donecount += length;
|
|
|
|
/* set next transfer size according to HW capabilities */
|
|
request->transfersize = min((request->bytecount-request->donecount),
|
|
request->transfersize);
|
|
/* return wait for interrupt */
|
|
goto end_continue;
|
|
|
|
case ATAPI_P_READ:
|
|
if (request->flags & ATA_R_WRITE) {
|
|
request->status = ATA_S_ERROR;
|
|
device_printf(request->parent,
|
|
"%s trying to read on write buffer\n",
|
|
ata_cmd2str(request));
|
|
goto end_finished;
|
|
}
|
|
ata_pio_read(request, length);
|
|
request->donecount += length;
|
|
|
|
/* set next transfer size according to HW capabilities */
|
|
request->transfersize = min((request->bytecount-request->donecount),
|
|
request->transfersize);
|
|
/* return wait for interrupt */
|
|
goto end_continue;
|
|
|
|
case ATAPI_P_DONEDRQ:
|
|
device_printf(request->parent,
|
|
"WARNING - %s DONEDRQ non conformant device\n",
|
|
ata_cmd2str(request));
|
|
if (request->flags & ATA_R_READ) {
|
|
ata_pio_read(request, length);
|
|
request->donecount += length;
|
|
}
|
|
else if (request->flags & ATA_R_WRITE) {
|
|
ata_pio_write(request, length);
|
|
request->donecount += length;
|
|
}
|
|
else
|
|
request->status = ATA_S_ERROR;
|
|
/* FALLTHROUGH */
|
|
|
|
case ATAPI_P_ABORT:
|
|
case ATAPI_P_DONE:
|
|
if (request->status & (ATA_S_ERROR | ATA_S_DWF))
|
|
request->error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
goto end_finished;
|
|
|
|
default:
|
|
device_printf(request->parent, "unknown transfer phase\n");
|
|
request->status = ATA_S_ERROR;
|
|
}
|
|
|
|
/* done with HW */
|
|
goto end_finished;
|
|
|
|
/* ATAPI DMA commands */
|
|
case ATA_R_ATAPI|ATA_R_DMA:
|
|
|
|
/* stop DMA engine and get status */
|
|
if (ch->dma.stop)
|
|
request->dma->status = ch->dma.stop(request);
|
|
|
|
/* did we get error or data */
|
|
if (request->status & (ATA_S_ERROR | ATA_S_DWF))
|
|
request->error = ATA_IDX_INB(ch, ATA_ERROR);
|
|
else if (request->dma->status & ATA_BMSTAT_ERROR)
|
|
request->status |= ATA_S_ERROR;
|
|
else if (!(request->flags & ATA_R_TIMEOUT))
|
|
request->donecount = request->bytecount;
|
|
|
|
/* release SG list etc */
|
|
ch->dma.unload(request);
|
|
|
|
/* done with HW */
|
|
goto end_finished;
|
|
}
|
|
/* NOT REACHED */
|
|
printf("ata_end_transaction OOPS!!\n");
|
|
|
|
end_finished:
|
|
callout_stop(&request->callout);
|
|
return ATA_OP_FINISHED;
|
|
|
|
end_continue:
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
/* must be called with ATA channel locked and state_mtx held */
|
|
void
|
|
ata_generic_reset(device_t dev)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
u_int8_t ostat0 = 0, stat0 = 0, ostat1 = 0, stat1 = 0;
|
|
u_int8_t err = 0, lsb = 0, msb = 0;
|
|
int mask = 0, timeout;
|
|
|
|
/* do we have any signs of ATA/ATAPI HW being present ? */
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_D_LBA | ATA_DEV(ATA_MASTER));
|
|
DELAY(10);
|
|
ostat0 = ATA_IDX_INB(ch, ATA_STATUS);
|
|
if (((ostat0 & 0xf8) != 0xf8 || (ch->flags & ATA_KNOWN_PRESENCE)) &&
|
|
ostat0 != 0xa5) {
|
|
stat0 = ATA_S_BUSY;
|
|
mask |= 0x01;
|
|
}
|
|
|
|
/* in some setups we dont want to test for a slave */
|
|
if (!(ch->flags & ATA_NO_SLAVE)) {
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_D_LBA | ATA_DEV(ATA_SLAVE));
|
|
DELAY(10);
|
|
ostat1 = ATA_IDX_INB(ch, ATA_STATUS);
|
|
if (((ostat1 & 0xf8) != 0xf8 || (ch->flags & ATA_KNOWN_PRESENCE)) &&
|
|
ostat1 != 0xa5) {
|
|
stat1 = ATA_S_BUSY;
|
|
mask |= 0x02;
|
|
}
|
|
}
|
|
|
|
if (bootverbose)
|
|
device_printf(dev, "reset tp1 mask=%02x ostat0=%02x ostat1=%02x\n",
|
|
mask, ostat0, ostat1);
|
|
|
|
/* if nothing showed up there is no need to get any further */
|
|
/* XXX SOS is that too strong?, we just might lose devices here */
|
|
ch->devices = 0;
|
|
if (!mask)
|
|
return;
|
|
|
|
/* reset (both) devices on this channel */
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_D_LBA | ATA_DEV(ATA_MASTER));
|
|
DELAY(10);
|
|
ATA_IDX_OUTB(ch, ATA_CONTROL, ATA_A_IDS | ATA_A_RESET);
|
|
ata_udelay(10000);
|
|
ATA_IDX_OUTB(ch, ATA_CONTROL, ATA_A_IDS);
|
|
ata_udelay(100000);
|
|
ATA_IDX_INB(ch, ATA_ERROR);
|
|
|
|
/* wait for BUSY to go inactive */
|
|
for (timeout = 0; timeout < 310; timeout++) {
|
|
if ((mask & 0x01) && (stat0 & ATA_S_BUSY)) {
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_DEV(ATA_MASTER));
|
|
DELAY(10);
|
|
if (ch->flags & ATA_STATUS_IS_LONG)
|
|
stat0 = ATA_IDX_INL(ch, ATA_STATUS) & 0xff;
|
|
else
|
|
stat0 = ATA_IDX_INB(ch, ATA_STATUS);
|
|
err = ATA_IDX_INB(ch, ATA_ERROR);
|
|
lsb = ATA_IDX_INB(ch, ATA_CYL_LSB);
|
|
msb = ATA_IDX_INB(ch, ATA_CYL_MSB);
|
|
if (bootverbose)
|
|
device_printf(dev,
|
|
"stat0=0x%02x err=0x%02x lsb=0x%02x msb=0x%02x\n",
|
|
stat0, err, lsb, msb);
|
|
if (stat0 == err && lsb == err && msb == err &&
|
|
timeout > (stat0 & ATA_S_BUSY ? 100 : 10))
|
|
mask &= ~0x01;
|
|
if (!(stat0 & ATA_S_BUSY)) {
|
|
if ((err & 0x7f) == ATA_E_ILI) {
|
|
if (lsb == ATAPI_MAGIC_LSB && msb == ATAPI_MAGIC_MSB) {
|
|
ch->devices |= ATA_ATAPI_MASTER;
|
|
}
|
|
else if (lsb == 0 && msb == 0 && (stat0 & ATA_S_READY)) {
|
|
ch->devices |= ATA_ATA_MASTER;
|
|
}
|
|
}
|
|
else if ((stat0 & 0x0f) && err == lsb && err == msb) {
|
|
stat0 |= ATA_S_BUSY;
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((mask & 0x02) && (stat1 & ATA_S_BUSY) &&
|
|
!((mask & 0x01) && (stat0 & ATA_S_BUSY))) {
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_DEV(ATA_SLAVE));
|
|
DELAY(10);
|
|
if (ch->flags & ATA_STATUS_IS_LONG)
|
|
stat1 = ATA_IDX_INL(ch, ATA_STATUS) & 0xff;
|
|
else
|
|
stat1 = ATA_IDX_INB(ch, ATA_STATUS);
|
|
err = ATA_IDX_INB(ch, ATA_ERROR);
|
|
lsb = ATA_IDX_INB(ch, ATA_CYL_LSB);
|
|
msb = ATA_IDX_INB(ch, ATA_CYL_MSB);
|
|
if (bootverbose)
|
|
device_printf(dev,
|
|
"stat1=0x%02x err=0x%02x lsb=0x%02x msb=0x%02x\n",
|
|
stat1, err, lsb, msb);
|
|
if (stat1 == err && lsb == err && msb == err &&
|
|
timeout > (stat1 & ATA_S_BUSY ? 100 : 10))
|
|
mask &= ~0x02;
|
|
if (!(stat1 & ATA_S_BUSY)) {
|
|
if ((err & 0x7f) == ATA_E_ILI) {
|
|
if (lsb == ATAPI_MAGIC_LSB && msb == ATAPI_MAGIC_MSB) {
|
|
ch->devices |= ATA_ATAPI_SLAVE;
|
|
}
|
|
else if (lsb == 0 && msb == 0 && (stat1 & ATA_S_READY)) {
|
|
ch->devices |= ATA_ATA_SLAVE;
|
|
}
|
|
}
|
|
else if ((stat1 & 0x0f) && err == lsb && err == msb) {
|
|
stat1 |= ATA_S_BUSY;
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((ch->flags & ATA_KNOWN_PRESENCE) == 0 &&
|
|
timeout > ((mask == 0x03) ? 20 : 10)) {
|
|
if ((mask & 0x01) && stat0 == 0xff)
|
|
mask &= ~0x01;
|
|
if ((mask & 0x02) && stat1 == 0xff)
|
|
mask &= ~0x02;
|
|
}
|
|
if (((mask & 0x01) == 0 || !(stat0 & ATA_S_BUSY)) &&
|
|
((mask & 0x02) == 0 || !(stat1 & ATA_S_BUSY)))
|
|
break;
|
|
ata_udelay(100000);
|
|
}
|
|
|
|
if (bootverbose)
|
|
device_printf(dev, "reset tp2 stat0=%02x stat1=%02x devices=0x%x\n",
|
|
stat0, stat1, ch->devices);
|
|
}
|
|
|
|
/* must be called with ATA channel locked and state_mtx held */
|
|
static int
|
|
ata_generic_status(device_t dev)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if (ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_BUSY) {
|
|
DELAY(100);
|
|
if (ATA_IDX_INB(ch, ATA_ALTSTAT) & ATA_S_BUSY)
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
ata_wait(struct ata_channel *ch, int unit, u_int8_t mask)
|
|
{
|
|
u_int8_t status;
|
|
int timeout = 0;
|
|
|
|
DELAY(1);
|
|
|
|
/* wait at max 1 second for device to get !BUSY */
|
|
while (timeout < 1000000) {
|
|
status = ATA_IDX_INB(ch, ATA_ALTSTAT);
|
|
|
|
/* if drive fails status, reselect the drive and try again */
|
|
if (status == 0xff) {
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_DEV(unit));
|
|
timeout += 1000;
|
|
DELAY(1000);
|
|
continue;
|
|
}
|
|
|
|
/* are we done ? */
|
|
if (!(status & ATA_S_BUSY))
|
|
break;
|
|
|
|
if (timeout > 1000) {
|
|
timeout += 1000;
|
|
DELAY(1000);
|
|
}
|
|
else {
|
|
timeout += 10;
|
|
DELAY(10);
|
|
}
|
|
}
|
|
if (timeout >= 1000000)
|
|
return -2;
|
|
if (!mask)
|
|
return (status & ATA_S_ERROR);
|
|
|
|
DELAY(1);
|
|
|
|
/* wait 50 msec for bits wanted */
|
|
timeout = 5000;
|
|
while (timeout--) {
|
|
status = ATA_IDX_INB(ch, ATA_ALTSTAT);
|
|
if ((status & mask) == mask)
|
|
return (status & ATA_S_ERROR);
|
|
DELAY(10);
|
|
}
|
|
return -3;
|
|
}
|
|
|
|
int
|
|
ata_generic_command(struct ata_request *request)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
|
|
/* select device */
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_IBM | ATA_D_LBA | ATA_DEV(request->unit));
|
|
|
|
/* ready to issue command ? */
|
|
if (ata_wait(ch, request->unit, 0) < 0) {
|
|
device_printf(request->parent, "timeout waiting to issue command\n");
|
|
request->flags |= ATA_R_TIMEOUT;
|
|
return (-1);
|
|
}
|
|
|
|
/* enable interrupt */
|
|
ATA_IDX_OUTB(ch, ATA_CONTROL, ATA_A_4BIT);
|
|
|
|
if (request->flags & ATA_R_ATAPI) {
|
|
int timeout = 5000;
|
|
int res;
|
|
|
|
/* issue packet command to controller */
|
|
if (request->flags & ATA_R_DMA) {
|
|
ATA_IDX_OUTB(ch, ATA_FEATURE, ATA_F_DMA);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_LSB, 0);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_MSB, 0);
|
|
}
|
|
else {
|
|
ATA_IDX_OUTB(ch, ATA_FEATURE, 0);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_LSB, request->transfersize);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_MSB, request->transfersize >> 8);
|
|
}
|
|
ATA_IDX_OUTB(ch, ATA_COMMAND, ATA_PACKET_CMD);
|
|
|
|
/* command interrupt device ? just return and wait for interrupt */
|
|
if (request->flags & ATA_R_ATAPI_INTR)
|
|
return (0);
|
|
|
|
/* command processed ? */
|
|
res = ata_wait(ch, request->unit, 0);
|
|
if (res != 0) {
|
|
if (res < 0) {
|
|
device_printf(request->parent,
|
|
"timeout waiting for PACKET command\n");
|
|
request->flags |= ATA_R_TIMEOUT;
|
|
}
|
|
return (-1);
|
|
}
|
|
/* wait for ready to write ATAPI command block */
|
|
while (timeout--) {
|
|
int reason = ATA_IDX_INB(ch, ATA_IREASON);
|
|
int status = ATA_IDX_INB(ch, ATA_STATUS);
|
|
|
|
if (((reason & (ATA_I_CMD | ATA_I_IN)) |
|
|
(status & (ATA_S_DRQ | ATA_S_BUSY))) == ATAPI_P_CMDOUT)
|
|
break;
|
|
DELAY(20);
|
|
}
|
|
if (timeout <= 0) {
|
|
device_printf(request->parent,
|
|
"timeout waiting for ATAPI ready\n");
|
|
request->flags |= ATA_R_TIMEOUT;
|
|
return (-1);
|
|
}
|
|
|
|
/* this seems to be needed for some (slow) devices */
|
|
DELAY(10);
|
|
|
|
/* output command block */
|
|
ATA_IDX_OUTSW_STRM(ch, ATA_DATA, (int16_t *)request->u.atapi.ccb,
|
|
(request->flags & ATA_R_ATAPI16) ? 8 : 6);
|
|
}
|
|
else {
|
|
ch->hw.tf_write(request);
|
|
|
|
/* issue command to controller */
|
|
ATA_IDX_OUTB(ch, ATA_COMMAND, request->u.ata.command);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ata_tf_read(struct ata_request *request)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
|
|
if (request->flags & ATA_R_48BIT) {
|
|
ATA_IDX_OUTB(ch, ATA_CONTROL, ATA_A_4BIT | ATA_A_HOB);
|
|
request->u.ata.count = (ATA_IDX_INB(ch, ATA_COUNT) << 8);
|
|
request->u.ata.lba =
|
|
((u_int64_t)(ATA_IDX_INB(ch, ATA_SECTOR)) << 24) |
|
|
((u_int64_t)(ATA_IDX_INB(ch, ATA_CYL_LSB)) << 32) |
|
|
((u_int64_t)(ATA_IDX_INB(ch, ATA_CYL_MSB)) << 40);
|
|
|
|
ATA_IDX_OUTB(ch, ATA_CONTROL, ATA_A_4BIT);
|
|
request->u.ata.count |= ATA_IDX_INB(ch, ATA_COUNT);
|
|
request->u.ata.lba |=
|
|
(ATA_IDX_INB(ch, ATA_SECTOR) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_LSB) << 8) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_MSB) << 16));
|
|
}
|
|
else {
|
|
request->u.ata.count = ATA_IDX_INB(ch, ATA_COUNT);
|
|
request->u.ata.lba = ATA_IDX_INB(ch, ATA_SECTOR) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_LSB) << 8) |
|
|
(ATA_IDX_INB(ch, ATA_CYL_MSB) << 16) |
|
|
((ATA_IDX_INB(ch, ATA_DRIVE) & 0xf) << 24);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ata_tf_write(struct ata_request *request)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
|
|
if (request->flags & ATA_R_48BIT) {
|
|
ATA_IDX_OUTB(ch, ATA_FEATURE, request->u.ata.feature >> 8);
|
|
ATA_IDX_OUTB(ch, ATA_FEATURE, request->u.ata.feature);
|
|
ATA_IDX_OUTB(ch, ATA_COUNT, request->u.ata.count >> 8);
|
|
ATA_IDX_OUTB(ch, ATA_COUNT, request->u.ata.count);
|
|
ATA_IDX_OUTB(ch, ATA_SECTOR, request->u.ata.lba >> 24);
|
|
ATA_IDX_OUTB(ch, ATA_SECTOR, request->u.ata.lba);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_LSB, request->u.ata.lba >> 32);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_LSB, request->u.ata.lba >> 8);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_MSB, request->u.ata.lba >> 40);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_MSB, request->u.ata.lba >> 16);
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE, ATA_D_LBA | ATA_DEV(request->unit));
|
|
}
|
|
else {
|
|
ATA_IDX_OUTB(ch, ATA_FEATURE, request->u.ata.feature);
|
|
ATA_IDX_OUTB(ch, ATA_COUNT, request->u.ata.count);
|
|
ATA_IDX_OUTB(ch, ATA_SECTOR, request->u.ata.lba);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_LSB, request->u.ata.lba >> 8);
|
|
ATA_IDX_OUTB(ch, ATA_CYL_MSB, request->u.ata.lba >> 16);
|
|
ATA_IDX_OUTB(ch, ATA_DRIVE,
|
|
ATA_D_IBM | ATA_D_LBA | ATA_DEV(request->unit) |
|
|
((request->u.ata.lba >> 24) & 0x0f));
|
|
}
|
|
}
|
|
|
|
static void
|
|
ata_pio_read(struct ata_request *request, int length)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
struct bio *bio;
|
|
uint8_t *addr;
|
|
vm_offset_t page;
|
|
int todo, done, off, moff, resid, size, i;
|
|
uint8_t buf[2] __aligned(2);
|
|
|
|
todo = min(request->transfersize, length);
|
|
page = done = resid = 0;
|
|
while (done < todo) {
|
|
size = todo - done;
|
|
|
|
/* Prepare data address and limit size (if not sequential). */
|
|
off = request->donecount + done;
|
|
if ((request->flags & ATA_R_DATA_IN_CCB) == 0 ||
|
|
(request->ccb->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_VADDR) {
|
|
addr = (uint8_t *)request->data + off;
|
|
} else if ((request->ccb->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_BIO) {
|
|
bio = (struct bio *)request->data;
|
|
if ((bio->bio_flags & BIO_UNMAPPED) == 0) {
|
|
addr = (uint8_t *)bio->bio_data + off;
|
|
} else {
|
|
moff = bio->bio_ma_offset + off;
|
|
page = pmap_quick_enter_page(
|
|
bio->bio_ma[moff / PAGE_SIZE]);
|
|
moff %= PAGE_SIZE;
|
|
size = min(size, PAGE_SIZE - moff);
|
|
addr = (void *)(page + moff);
|
|
}
|
|
} else
|
|
panic("ata_pio_read: Unsupported CAM data type %x\n",
|
|
(request->ccb->ccb_h.flags & CAM_DATA_MASK));
|
|
|
|
/* We may have extra byte already read but not stored. */
|
|
if (resid) {
|
|
addr[0] = buf[1];
|
|
addr++;
|
|
done++;
|
|
size--;
|
|
}
|
|
|
|
/* Process main part of data. */
|
|
resid = size % 2;
|
|
if (__predict_false((ch->flags & ATA_USE_16BIT) ||
|
|
(size % 4) != 0 || ((uintptr_t)addr % 4) != 0)) {
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
if (__predict_false((uintptr_t)addr % 2)) {
|
|
for (i = 0; i + 1 < size; i += 2) {
|
|
*(uint16_t *)&buf =
|
|
ATA_IDX_INW_STRM(ch, ATA_DATA);
|
|
addr[i] = buf[0];
|
|
addr[i + 1] = buf[1];
|
|
}
|
|
} else
|
|
#endif
|
|
ATA_IDX_INSW_STRM(ch, ATA_DATA, (void*)addr,
|
|
size / 2);
|
|
|
|
/* If we have extra byte of data, leave it for later. */
|
|
if (resid) {
|
|
*(uint16_t *)&buf =
|
|
ATA_IDX_INW_STRM(ch, ATA_DATA);
|
|
addr[size - 1] = buf[0];
|
|
}
|
|
} else
|
|
ATA_IDX_INSL_STRM(ch, ATA_DATA, (void*)addr, size / 4);
|
|
|
|
if (page) {
|
|
pmap_quick_remove_page(page);
|
|
page = 0;
|
|
}
|
|
done += size;
|
|
}
|
|
|
|
if (length > done) {
|
|
device_printf(request->parent,
|
|
"WARNING - %s read data overrun %d > %d\n",
|
|
ata_cmd2str(request), length, done);
|
|
for (i = done + resid; i < length; i += 2)
|
|
ATA_IDX_INW(ch, ATA_DATA);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ata_pio_write(struct ata_request *request, int length)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(request->parent);
|
|
struct bio *bio;
|
|
uint8_t *addr;
|
|
vm_offset_t page;
|
|
int todo, done, off, moff, resid, size, i;
|
|
uint8_t buf[2] __aligned(2);
|
|
|
|
todo = min(request->transfersize, length);
|
|
page = done = resid = 0;
|
|
while (done < todo) {
|
|
size = todo - done;
|
|
|
|
/* Prepare data address and limit size (if not sequential). */
|
|
off = request->donecount + done;
|
|
if ((request->flags & ATA_R_DATA_IN_CCB) == 0 ||
|
|
(request->ccb->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_VADDR) {
|
|
addr = (uint8_t *)request->data + off;
|
|
} else if ((request->ccb->ccb_h.flags & CAM_DATA_MASK) == CAM_DATA_BIO) {
|
|
bio = (struct bio *)request->data;
|
|
if ((bio->bio_flags & BIO_UNMAPPED) == 0) {
|
|
addr = (uint8_t *)bio->bio_data + off;
|
|
} else {
|
|
moff = bio->bio_ma_offset + off;
|
|
page = pmap_quick_enter_page(
|
|
bio->bio_ma[moff / PAGE_SIZE]);
|
|
moff %= PAGE_SIZE;
|
|
size = min(size, PAGE_SIZE - moff);
|
|
addr = (void *)(page + moff);
|
|
}
|
|
} else
|
|
panic("ata_pio_write: Unsupported CAM data type %x\n",
|
|
(request->ccb->ccb_h.flags & CAM_DATA_MASK));
|
|
|
|
/* We may have extra byte to be written first. */
|
|
if (resid) {
|
|
buf[1] = addr[0];
|
|
ATA_IDX_OUTW_STRM(ch, ATA_DATA, *(uint16_t *)&buf);
|
|
addr++;
|
|
done++;
|
|
size--;
|
|
}
|
|
|
|
/* Process main part of data. */
|
|
resid = size % 2;
|
|
if (__predict_false((ch->flags & ATA_USE_16BIT) ||
|
|
(size % 4) != 0 || ((uintptr_t)addr % 4) != 0)) {
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
if (__predict_false((uintptr_t)addr % 2)) {
|
|
for (i = 0; i + 1 < size; i += 2) {
|
|
buf[0] = addr[i];
|
|
buf[1] = addr[i + 1];
|
|
ATA_IDX_OUTW_STRM(ch, ATA_DATA,
|
|
*(uint16_t *)&buf);
|
|
}
|
|
} else
|
|
#endif
|
|
ATA_IDX_OUTSW_STRM(ch, ATA_DATA, (void*)addr,
|
|
size / 2);
|
|
|
|
/* If we have extra byte of data, save it for later. */
|
|
if (resid)
|
|
buf[0] = addr[size - 1];
|
|
} else
|
|
ATA_IDX_OUTSL_STRM(ch, ATA_DATA,
|
|
(void*)addr, size / sizeof(int32_t));
|
|
|
|
if (page) {
|
|
pmap_quick_remove_page(page);
|
|
page = 0;
|
|
}
|
|
done += size;
|
|
}
|
|
|
|
/* We may have extra byte of data to be written. Pad it with zero. */
|
|
if (resid) {
|
|
buf[1] = 0;
|
|
ATA_IDX_OUTW_STRM(ch, ATA_DATA, *(uint16_t *)&buf);
|
|
}
|
|
|
|
if (length > done) {
|
|
device_printf(request->parent,
|
|
"WARNING - %s write data underrun %d > %d\n",
|
|
ata_cmd2str(request), length, done);
|
|
for (i = done + resid; i < length; i += 2)
|
|
ATA_IDX_OUTW(ch, ATA_DATA, 0);
|
|
}
|
|
}
|