2702 lines
73 KiB
C
2702 lines
73 KiB
C
/******************************************************************************
|
|
SPDX-License-Identifier: BSD-3-Clause
|
|
|
|
Copyright (c) 2001-2020, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
|
|
#include "ixgbe_api.h"
|
|
#include "ixgbe_common.h"
|
|
#include "ixgbe_phy.h"
|
|
|
|
static void ixgbe_i2c_start(struct ixgbe_hw *hw);
|
|
static void ixgbe_i2c_stop(struct ixgbe_hw *hw);
|
|
static void ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
|
|
static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
|
|
static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
|
|
static void ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
|
|
static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
|
|
static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
|
|
static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
|
|
static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
|
|
static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl);
|
|
static s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 *sff8472_data);
|
|
|
|
/**
|
|
* ixgbe_out_i2c_byte_ack - Send I2C byte with ack
|
|
* @hw: pointer to the hardware structure
|
|
* @byte: byte to send
|
|
*
|
|
* Returns an error code on error.
|
|
*/
|
|
static s32 ixgbe_out_i2c_byte_ack(struct ixgbe_hw *hw, u8 byte)
|
|
{
|
|
s32 status;
|
|
|
|
status = ixgbe_clock_out_i2c_byte(hw, byte);
|
|
if (status)
|
|
return status;
|
|
return ixgbe_get_i2c_ack(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_in_i2c_byte_ack - Receive an I2C byte and send ack
|
|
* @hw: pointer to the hardware structure
|
|
* @byte: pointer to a u8 to receive the byte
|
|
*
|
|
* Returns an error code on error.
|
|
*/
|
|
static s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
|
|
{
|
|
ixgbe_clock_in_i2c_byte(hw, byte);
|
|
/* ACK */
|
|
return ixgbe_clock_out_i2c_bit(hw, false);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_ones_comp_byte_add - Perform one's complement addition
|
|
* @add1: addend 1
|
|
* @add2: addend 2
|
|
*
|
|
* Returns one's complement 8-bit sum.
|
|
*/
|
|
static u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
|
|
{
|
|
u16 sum = add1 + add2;
|
|
|
|
sum = (sum & 0xFF) + (sum >> 8);
|
|
return sum & 0xFF;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_combined_generic_int - Perform I2C read combined operation
|
|
* @hw: pointer to the hardware structure
|
|
* @addr: I2C bus address to read from
|
|
* @reg: I2C device register to read from
|
|
* @val: pointer to location to receive read value
|
|
* @lock: true if to take and release semaphore
|
|
*
|
|
* Returns an error code on error.
|
|
*/
|
|
s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg,
|
|
u16 *val, bool lock)
|
|
{
|
|
u32 swfw_mask = hw->phy.phy_semaphore_mask;
|
|
int max_retry = 3;
|
|
int retry = 0;
|
|
u8 csum_byte;
|
|
u8 high_bits;
|
|
u8 low_bits;
|
|
u8 reg_high;
|
|
u8 csum;
|
|
|
|
reg_high = ((reg >> 7) & 0xFE) | 1; /* Indicate read combined */
|
|
csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
|
|
csum = ~csum;
|
|
do {
|
|
if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
|
|
return IXGBE_ERR_SWFW_SYNC;
|
|
ixgbe_i2c_start(hw);
|
|
/* Device Address and write indication */
|
|
if (ixgbe_out_i2c_byte_ack(hw, addr))
|
|
goto fail;
|
|
/* Write bits 14:8 */
|
|
if (ixgbe_out_i2c_byte_ack(hw, reg_high))
|
|
goto fail;
|
|
/* Write bits 7:0 */
|
|
if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
|
|
goto fail;
|
|
/* Write csum */
|
|
if (ixgbe_out_i2c_byte_ack(hw, csum))
|
|
goto fail;
|
|
/* Re-start condition */
|
|
ixgbe_i2c_start(hw);
|
|
/* Device Address and read indication */
|
|
if (ixgbe_out_i2c_byte_ack(hw, addr | 1))
|
|
goto fail;
|
|
/* Get upper bits */
|
|
if (ixgbe_in_i2c_byte_ack(hw, &high_bits))
|
|
goto fail;
|
|
/* Get low bits */
|
|
if (ixgbe_in_i2c_byte_ack(hw, &low_bits))
|
|
goto fail;
|
|
/* Get csum */
|
|
ixgbe_clock_in_i2c_byte(hw, &csum_byte);
|
|
/* NACK */
|
|
if (ixgbe_clock_out_i2c_bit(hw, false))
|
|
goto fail;
|
|
ixgbe_i2c_stop(hw);
|
|
if (lock)
|
|
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
|
|
*val = (high_bits << 8) | low_bits;
|
|
return 0;
|
|
|
|
fail:
|
|
ixgbe_i2c_bus_clear(hw);
|
|
if (lock)
|
|
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
|
|
if (retry < max_retry)
|
|
DEBUGOUT("I2C byte read combined error - Retrying.\n");
|
|
else
|
|
DEBUGOUT("I2C byte read combined error.\n");
|
|
retry++;
|
|
} while (retry <= max_retry);
|
|
|
|
return IXGBE_ERR_I2C;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
|
|
* @hw: pointer to the hardware structure
|
|
* @addr: I2C bus address to write to
|
|
* @reg: I2C device register to write to
|
|
* @val: value to write
|
|
* @lock: true if to take and release semaphore
|
|
*
|
|
* Returns an error code on error.
|
|
*/
|
|
s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg,
|
|
u16 val, bool lock)
|
|
{
|
|
u32 swfw_mask = hw->phy.phy_semaphore_mask;
|
|
int max_retry = 1;
|
|
int retry = 0;
|
|
u8 reg_high;
|
|
u8 csum;
|
|
|
|
reg_high = (reg >> 7) & 0xFE; /* Indicate write combined */
|
|
csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
|
|
csum = ixgbe_ones_comp_byte_add(csum, val >> 8);
|
|
csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF);
|
|
csum = ~csum;
|
|
do {
|
|
if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
|
|
return IXGBE_ERR_SWFW_SYNC;
|
|
ixgbe_i2c_start(hw);
|
|
/* Device Address and write indication */
|
|
if (ixgbe_out_i2c_byte_ack(hw, addr))
|
|
goto fail;
|
|
/* Write bits 14:8 */
|
|
if (ixgbe_out_i2c_byte_ack(hw, reg_high))
|
|
goto fail;
|
|
/* Write bits 7:0 */
|
|
if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
|
|
goto fail;
|
|
/* Write data 15:8 */
|
|
if (ixgbe_out_i2c_byte_ack(hw, val >> 8))
|
|
goto fail;
|
|
/* Write data 7:0 */
|
|
if (ixgbe_out_i2c_byte_ack(hw, val & 0xFF))
|
|
goto fail;
|
|
/* Write csum */
|
|
if (ixgbe_out_i2c_byte_ack(hw, csum))
|
|
goto fail;
|
|
ixgbe_i2c_stop(hw);
|
|
if (lock)
|
|
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
|
|
return 0;
|
|
|
|
fail:
|
|
ixgbe_i2c_bus_clear(hw);
|
|
if (lock)
|
|
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
|
|
if (retry < max_retry)
|
|
DEBUGOUT("I2C byte write combined error - Retrying.\n");
|
|
else
|
|
DEBUGOUT("I2C byte write combined error.\n");
|
|
retry++;
|
|
} while (retry <= max_retry);
|
|
|
|
return IXGBE_ERR_I2C;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_init_phy_ops_generic - Inits PHY function ptrs
|
|
* @hw: pointer to the hardware structure
|
|
*
|
|
* Initialize the function pointers.
|
|
**/
|
|
s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw)
|
|
{
|
|
struct ixgbe_phy_info *phy = &hw->phy;
|
|
|
|
DEBUGFUNC("ixgbe_init_phy_ops_generic");
|
|
|
|
/* PHY */
|
|
phy->ops.identify = ixgbe_identify_phy_generic;
|
|
phy->ops.reset = ixgbe_reset_phy_generic;
|
|
phy->ops.read_reg = ixgbe_read_phy_reg_generic;
|
|
phy->ops.write_reg = ixgbe_write_phy_reg_generic;
|
|
phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi;
|
|
phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi;
|
|
phy->ops.setup_link = ixgbe_setup_phy_link_generic;
|
|
phy->ops.setup_link_speed = ixgbe_setup_phy_link_speed_generic;
|
|
phy->ops.check_link = NULL;
|
|
phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_generic;
|
|
phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_generic;
|
|
phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_generic;
|
|
phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_generic;
|
|
phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_generic;
|
|
phy->ops.write_i2c_eeprom = ixgbe_write_i2c_eeprom_generic;
|
|
phy->ops.i2c_bus_clear = ixgbe_i2c_bus_clear;
|
|
phy->ops.identify_sfp = ixgbe_identify_module_generic;
|
|
phy->sfp_type = ixgbe_sfp_type_unknown;
|
|
phy->ops.read_i2c_byte_unlocked = ixgbe_read_i2c_byte_generic_unlocked;
|
|
phy->ops.write_i2c_byte_unlocked =
|
|
ixgbe_write_i2c_byte_generic_unlocked;
|
|
phy->ops.check_overtemp = ixgbe_tn_check_overtemp;
|
|
return IXGBE_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_probe_phy - Probe a single address for a PHY
|
|
* @hw: pointer to hardware structure
|
|
* @phy_addr: PHY address to probe
|
|
*
|
|
* Returns true if PHY found
|
|
*/
|
|
static bool ixgbe_probe_phy(struct ixgbe_hw *hw, u16 phy_addr)
|
|
{
|
|
u16 ext_ability = 0;
|
|
|
|
if (!ixgbe_validate_phy_addr(hw, phy_addr)) {
|
|
DEBUGOUT1("Unable to validate PHY address 0x%04X\n",
|
|
phy_addr);
|
|
return false;
|
|
}
|
|
|
|
if (ixgbe_get_phy_id(hw))
|
|
return false;
|
|
|
|
hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
|
|
|
|
if (hw->phy.type == ixgbe_phy_unknown) {
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
|
|
if (ext_ability &
|
|
(IXGBE_MDIO_PHY_10GBASET_ABILITY |
|
|
IXGBE_MDIO_PHY_1000BASET_ABILITY))
|
|
hw->phy.type = ixgbe_phy_cu_unknown;
|
|
else
|
|
hw->phy.type = ixgbe_phy_generic;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_identify_phy_generic - Get physical layer module
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Determines the physical layer module found on the current adapter.
|
|
**/
|
|
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
|
|
u16 phy_addr;
|
|
|
|
DEBUGFUNC("ixgbe_identify_phy_generic");
|
|
|
|
if (!hw->phy.phy_semaphore_mask) {
|
|
if (hw->bus.lan_id)
|
|
hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
|
|
else
|
|
hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
|
|
}
|
|
|
|
if (hw->phy.type != ixgbe_phy_unknown)
|
|
return IXGBE_SUCCESS;
|
|
|
|
if (hw->phy.nw_mng_if_sel) {
|
|
phy_addr = (hw->phy.nw_mng_if_sel &
|
|
IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >>
|
|
IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT;
|
|
if (ixgbe_probe_phy(hw, phy_addr))
|
|
return IXGBE_SUCCESS;
|
|
else
|
|
return IXGBE_ERR_PHY_ADDR_INVALID;
|
|
}
|
|
|
|
for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
|
|
if (ixgbe_probe_phy(hw, phy_addr)) {
|
|
status = IXGBE_SUCCESS;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Certain media types do not have a phy so an address will not
|
|
* be found and the code will take this path. Caller has to
|
|
* decide if it is an error or not.
|
|
*/
|
|
if (status != IXGBE_SUCCESS)
|
|
hw->phy.addr = 0;
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_check_reset_blocked - check status of MNG FW veto bit
|
|
* @hw: pointer to the hardware structure
|
|
*
|
|
* This function checks the MMNGC.MNG_VETO bit to see if there are
|
|
* any constraints on link from manageability. For MAC's that don't
|
|
* have this bit just return faluse since the link can not be blocked
|
|
* via this method.
|
|
**/
|
|
s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
|
|
{
|
|
u32 mmngc;
|
|
|
|
DEBUGFUNC("ixgbe_check_reset_blocked");
|
|
|
|
/* If we don't have this bit, it can't be blocking */
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
return false;
|
|
|
|
mmngc = IXGBE_READ_REG(hw, IXGBE_MMNGC);
|
|
if (mmngc & IXGBE_MMNGC_MNG_VETO) {
|
|
ERROR_REPORT1(IXGBE_ERROR_SOFTWARE,
|
|
"MNG_VETO bit detected.\n");
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_validate_phy_addr - Determines phy address is valid
|
|
* @hw: pointer to hardware structure
|
|
* @phy_addr: PHY address
|
|
*
|
|
**/
|
|
bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
|
|
{
|
|
u16 phy_id = 0;
|
|
bool valid = false;
|
|
|
|
DEBUGFUNC("ixgbe_validate_phy_addr");
|
|
|
|
hw->phy.addr = phy_addr;
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
|
|
|
|
if (phy_id != 0xFFFF && phy_id != 0x0)
|
|
valid = true;
|
|
|
|
DEBUGOUT1("PHY ID HIGH is 0x%04X\n", phy_id);
|
|
|
|
return valid;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_id - Get the phy type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
**/
|
|
s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
|
|
{
|
|
u32 status;
|
|
u16 phy_id_high = 0;
|
|
u16 phy_id_low = 0;
|
|
|
|
DEBUGFUNC("ixgbe_get_phy_id");
|
|
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
|
|
&phy_id_high);
|
|
|
|
if (status == IXGBE_SUCCESS) {
|
|
hw->phy.id = (u32)(phy_id_high << 16);
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
|
|
&phy_id_low);
|
|
hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
|
|
hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
|
|
}
|
|
DEBUGOUT2("PHY_ID_HIGH 0x%04X, PHY_ID_LOW 0x%04X\n",
|
|
phy_id_high, phy_id_low);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_type_from_id - Get the phy type
|
|
* @phy_id: PHY ID information
|
|
*
|
|
**/
|
|
enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
|
|
{
|
|
enum ixgbe_phy_type phy_type;
|
|
|
|
DEBUGFUNC("ixgbe_get_phy_type_from_id");
|
|
|
|
switch (phy_id) {
|
|
case TN1010_PHY_ID:
|
|
phy_type = ixgbe_phy_tn;
|
|
break;
|
|
case X550_PHY_ID2:
|
|
case X550_PHY_ID3:
|
|
case X540_PHY_ID:
|
|
phy_type = ixgbe_phy_aq;
|
|
break;
|
|
case QT2022_PHY_ID:
|
|
phy_type = ixgbe_phy_qt;
|
|
break;
|
|
case ATH_PHY_ID:
|
|
phy_type = ixgbe_phy_nl;
|
|
break;
|
|
case X557_PHY_ID:
|
|
case X557_PHY_ID2:
|
|
phy_type = ixgbe_phy_x550em_ext_t;
|
|
break;
|
|
case IXGBE_M88E1500_E_PHY_ID:
|
|
case IXGBE_M88E1543_E_PHY_ID:
|
|
phy_type = ixgbe_phy_ext_1g_t;
|
|
break;
|
|
default:
|
|
phy_type = ixgbe_phy_unknown;
|
|
break;
|
|
}
|
|
return phy_type;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_reset_phy_generic - Performs a PHY reset
|
|
* @hw: pointer to hardware structure
|
|
**/
|
|
s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
|
|
{
|
|
u32 i;
|
|
u16 ctrl = 0;
|
|
s32 status = IXGBE_SUCCESS;
|
|
|
|
DEBUGFUNC("ixgbe_reset_phy_generic");
|
|
|
|
if (hw->phy.type == ixgbe_phy_unknown)
|
|
status = ixgbe_identify_phy_generic(hw);
|
|
|
|
if (status != IXGBE_SUCCESS || hw->phy.type == ixgbe_phy_none)
|
|
goto out;
|
|
|
|
/* Don't reset PHY if it's shut down due to overtemp. */
|
|
if (!hw->phy.reset_if_overtemp &&
|
|
(IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
|
|
goto out;
|
|
|
|
/* Blocked by MNG FW so bail */
|
|
if (ixgbe_check_reset_blocked(hw))
|
|
goto out;
|
|
|
|
/*
|
|
* Perform soft PHY reset to the PHY_XS.
|
|
* This will cause a soft reset to the PHY
|
|
*/
|
|
hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE,
|
|
IXGBE_MDIO_PHY_XS_RESET);
|
|
|
|
/*
|
|
* Poll for reset bit to self-clear indicating reset is complete.
|
|
* Some PHYs could take up to 3 seconds to complete and need about
|
|
* 1.7 usec delay after the reset is complete.
|
|
*/
|
|
for (i = 0; i < 30; i++) {
|
|
msec_delay(100);
|
|
if (hw->phy.type == ixgbe_phy_x550em_ext_t) {
|
|
status = hw->phy.ops.read_reg(hw,
|
|
IXGBE_MDIO_TX_VENDOR_ALARMS_3,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
|
|
&ctrl);
|
|
if (status != IXGBE_SUCCESS)
|
|
return status;
|
|
|
|
if (ctrl & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) {
|
|
usec_delay(2);
|
|
break;
|
|
}
|
|
} else {
|
|
status = hw->phy.ops.read_reg(hw,
|
|
IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE,
|
|
&ctrl);
|
|
if (status != IXGBE_SUCCESS)
|
|
return status;
|
|
|
|
if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) {
|
|
usec_delay(2);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ctrl & IXGBE_MDIO_PHY_XS_RESET) {
|
|
status = IXGBE_ERR_RESET_FAILED;
|
|
ERROR_REPORT1(IXGBE_ERROR_POLLING,
|
|
"PHY reset polling failed to complete.\n");
|
|
}
|
|
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_restart_auto_neg - Restart auto negotiation on the PHY
|
|
* @hw: pointer to hardware structure
|
|
**/
|
|
void ixgbe_restart_auto_neg(struct ixgbe_hw *hw)
|
|
{
|
|
u16 autoneg_reg;
|
|
|
|
/* Check if PHY reset is blocked by MNG FW */
|
|
if (ixgbe_check_reset_blocked(hw))
|
|
return;
|
|
|
|
/* Restart PHY auto-negotiation. */
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
|
|
autoneg_reg |= IXGBE_MII_RESTART;
|
|
hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
|
|
* the SWFW lock
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit address of PHY register to read
|
|
* @device_type: 5 bit device type
|
|
* @phy_data: Pointer to read data from PHY register
|
|
**/
|
|
s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
|
|
u16 *phy_data)
|
|
{
|
|
u32 i, data, command;
|
|
|
|
/* Setup and write the address cycle command */
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle completed.
|
|
* The MDI Command bit will clear when the operation is
|
|
* complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
usec_delay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address command did not complete.\n");
|
|
DEBUGOUT("PHY address command did not complete, returning IXGBE_ERR_PHY\n");
|
|
return IXGBE_ERR_PHY;
|
|
}
|
|
|
|
/*
|
|
* Address cycle complete, setup and write the read
|
|
* command
|
|
*/
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle
|
|
* completed. The MDI Command bit will clear when the
|
|
* operation is complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
usec_delay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY read command didn't complete\n");
|
|
DEBUGOUT("PHY read command didn't complete, returning IXGBE_ERR_PHY\n");
|
|
return IXGBE_ERR_PHY;
|
|
}
|
|
|
|
/*
|
|
* Read operation is complete. Get the data
|
|
* from MSRWD
|
|
*/
|
|
data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
|
|
data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
|
|
*phy_data = (u16)(data);
|
|
|
|
return IXGBE_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
|
|
* using the SWFW lock - this function is needed in most cases
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit address of PHY register to read
|
|
* @device_type: 5 bit device type
|
|
* @phy_data: Pointer to read data from PHY register
|
|
**/
|
|
s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u16 *phy_data)
|
|
{
|
|
s32 status;
|
|
u32 gssr = hw->phy.phy_semaphore_mask;
|
|
|
|
DEBUGFUNC("ixgbe_read_phy_reg_generic");
|
|
|
|
if (hw->mac.ops.acquire_swfw_sync(hw, gssr))
|
|
return IXGBE_ERR_SWFW_SYNC;
|
|
|
|
status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data);
|
|
|
|
hw->mac.ops.release_swfw_sync(hw, gssr);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
|
|
* without SWFW lock
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit PHY register to write
|
|
* @device_type: 5 bit device type
|
|
* @phy_data: Data to write to the PHY register
|
|
**/
|
|
s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u16 phy_data)
|
|
{
|
|
u32 i, command;
|
|
|
|
/* Put the data in the MDI single read and write data register*/
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
|
|
|
|
/* Setup and write the address cycle command */
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle completed.
|
|
* The MDI Command bit will clear when the operation is
|
|
* complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
usec_delay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address cmd didn't complete\n");
|
|
return IXGBE_ERR_PHY;
|
|
}
|
|
|
|
/*
|
|
* Address cycle complete, setup and write the write
|
|
* command
|
|
*/
|
|
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
|
|
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
|
|
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
|
|
(IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
|
|
|
|
/*
|
|
* Check every 10 usec to see if the address cycle
|
|
* completed. The MDI Command bit will clear when the
|
|
* operation is complete
|
|
*/
|
|
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
|
|
usec_delay(10);
|
|
|
|
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
|
|
break;
|
|
}
|
|
|
|
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
|
|
ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY write cmd didn't complete\n");
|
|
return IXGBE_ERR_PHY;
|
|
}
|
|
|
|
return IXGBE_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
|
|
* using SWFW lock- this function is needed in most cases
|
|
* @hw: pointer to hardware structure
|
|
* @reg_addr: 32 bit PHY register to write
|
|
* @device_type: 5 bit device type
|
|
* @phy_data: Data to write to the PHY register
|
|
**/
|
|
s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
|
|
u32 device_type, u16 phy_data)
|
|
{
|
|
s32 status;
|
|
u32 gssr = hw->phy.phy_semaphore_mask;
|
|
|
|
DEBUGFUNC("ixgbe_write_phy_reg_generic");
|
|
|
|
if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
|
|
status = hw->phy.ops.write_reg_mdi(hw, reg_addr, device_type,
|
|
phy_data);
|
|
hw->mac.ops.release_swfw_sync(hw, gssr);
|
|
} else {
|
|
status = IXGBE_ERR_SWFW_SYNC;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_phy_link_generic - Set and restart auto-neg
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Restart auto-negotiation and PHY and waits for completion.
|
|
**/
|
|
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_SUCCESS;
|
|
u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
|
|
bool autoneg = false;
|
|
ixgbe_link_speed speed;
|
|
|
|
DEBUGFUNC("ixgbe_setup_phy_link_generic");
|
|
|
|
ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
|
|
|
|
/* Set or unset auto-negotiation 10G advertisement */
|
|
hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
&autoneg_reg);
|
|
|
|
autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
|
|
if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) &&
|
|
(speed & IXGBE_LINK_SPEED_10GB_FULL))
|
|
autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
autoneg_reg);
|
|
|
|
hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
&autoneg_reg);
|
|
|
|
if (hw->mac.type == ixgbe_mac_X550) {
|
|
/* Set or unset auto-negotiation 5G advertisement */
|
|
autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
|
|
if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_5GB_FULL) &&
|
|
(speed & IXGBE_LINK_SPEED_5GB_FULL))
|
|
autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
|
|
|
|
/* Set or unset auto-negotiation 2.5G advertisement */
|
|
autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
|
|
if ((hw->phy.autoneg_advertised &
|
|
IXGBE_LINK_SPEED_2_5GB_FULL) &&
|
|
(speed & IXGBE_LINK_SPEED_2_5GB_FULL))
|
|
autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
|
|
}
|
|
|
|
/* Set or unset auto-negotiation 1G advertisement */
|
|
autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
|
|
if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) &&
|
|
(speed & IXGBE_LINK_SPEED_1GB_FULL))
|
|
autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
autoneg_reg);
|
|
|
|
/* Set or unset auto-negotiation 100M advertisement */
|
|
hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
&autoneg_reg);
|
|
|
|
autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE |
|
|
IXGBE_MII_100BASE_T_ADVERTISE_HALF);
|
|
if ((hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) &&
|
|
(speed & IXGBE_LINK_SPEED_100_FULL))
|
|
autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
autoneg_reg);
|
|
|
|
ixgbe_restart_auto_neg(hw);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
|
|
* @hw: pointer to hardware structure
|
|
* @speed: new link speed
|
|
* @autoneg_wait_to_complete: unused
|
|
**/
|
|
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed speed,
|
|
bool autoneg_wait_to_complete)
|
|
{
|
|
UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
|
|
|
|
DEBUGFUNC("ixgbe_setup_phy_link_speed_generic");
|
|
|
|
/*
|
|
* Clear autoneg_advertised and set new values based on input link
|
|
* speed.
|
|
*/
|
|
hw->phy.autoneg_advertised = 0;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_5GB_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_5GB_FULL;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_2_5GB_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_2_5GB_FULL;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_100_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
|
|
|
|
if (speed & IXGBE_LINK_SPEED_10_FULL)
|
|
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10_FULL;
|
|
|
|
/* Setup link based on the new speed settings */
|
|
ixgbe_setup_phy_link(hw);
|
|
|
|
return IXGBE_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_copper_speeds_supported - Get copper link speeds from phy
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Determines the supported link capabilities by reading the PHY auto
|
|
* negotiation register.
|
|
**/
|
|
static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status;
|
|
u16 speed_ability;
|
|
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
|
|
&speed_ability);
|
|
if (status)
|
|
return status;
|
|
|
|
if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
|
|
hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
|
|
hw->phy.speeds_supported |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M)
|
|
hw->phy.speeds_supported |= IXGBE_LINK_SPEED_100_FULL;
|
|
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_X550:
|
|
hw->phy.speeds_supported |= IXGBE_LINK_SPEED_2_5GB_FULL;
|
|
hw->phy.speeds_supported |= IXGBE_LINK_SPEED_5GB_FULL;
|
|
break;
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
hw->phy.speeds_supported &= ~IXGBE_LINK_SPEED_100_FULL;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
|
|
* @hw: pointer to hardware structure
|
|
* @speed: pointer to link speed
|
|
* @autoneg: boolean auto-negotiation value
|
|
**/
|
|
s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
|
|
ixgbe_link_speed *speed,
|
|
bool *autoneg)
|
|
{
|
|
s32 status = IXGBE_SUCCESS;
|
|
|
|
DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
|
|
|
|
*autoneg = true;
|
|
if (!hw->phy.speeds_supported)
|
|
status = ixgbe_get_copper_speeds_supported(hw);
|
|
|
|
*speed = hw->phy.speeds_supported;
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_check_phy_link_tnx - Determine link and speed status
|
|
* @hw: pointer to hardware structure
|
|
* @speed: current link speed
|
|
* @link_up: true is link is up, false otherwise
|
|
*
|
|
* Reads the VS1 register to determine if link is up and the current speed for
|
|
* the PHY.
|
|
**/
|
|
s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
|
|
bool *link_up)
|
|
{
|
|
s32 status = IXGBE_SUCCESS;
|
|
u32 time_out;
|
|
u32 max_time_out = 10;
|
|
u16 phy_link = 0;
|
|
u16 phy_speed = 0;
|
|
u16 phy_data = 0;
|
|
|
|
DEBUGFUNC("ixgbe_check_phy_link_tnx");
|
|
|
|
/* Initialize speed and link to default case */
|
|
*link_up = false;
|
|
*speed = IXGBE_LINK_SPEED_10GB_FULL;
|
|
|
|
/*
|
|
* Check current speed and link status of the PHY register.
|
|
* This is a vendor specific register and may have to
|
|
* be changed for other copper PHYs.
|
|
*/
|
|
for (time_out = 0; time_out < max_time_out; time_out++) {
|
|
usec_delay(10);
|
|
status = hw->phy.ops.read_reg(hw,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
|
|
&phy_data);
|
|
phy_link = phy_data & IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
|
|
phy_speed = phy_data &
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
|
|
if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
|
|
*link_up = true;
|
|
if (phy_speed ==
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
|
|
*speed = IXGBE_LINK_SPEED_1GB_FULL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_setup_phy_link_tnx - Set and restart auto-neg
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Restart auto-negotiation and PHY and waits for completion.
|
|
**/
|
|
s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_SUCCESS;
|
|
u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
|
|
bool autoneg = false;
|
|
ixgbe_link_speed speed;
|
|
|
|
DEBUGFUNC("ixgbe_setup_phy_link_tnx");
|
|
|
|
ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
|
|
|
|
if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
|
|
/* Set or unset auto-negotiation 10G advertisement */
|
|
hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
&autoneg_reg);
|
|
|
|
autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
|
|
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
|
|
autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
autoneg_reg);
|
|
}
|
|
|
|
if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
|
|
/* Set or unset auto-negotiation 1G advertisement */
|
|
hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
&autoneg_reg);
|
|
|
|
autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
|
|
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
|
|
autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
autoneg_reg);
|
|
}
|
|
|
|
if (speed & IXGBE_LINK_SPEED_100_FULL) {
|
|
/* Set or unset auto-negotiation 100M advertisement */
|
|
hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
&autoneg_reg);
|
|
|
|
autoneg_reg &= ~IXGBE_MII_100BASE_T_ADVERTISE;
|
|
if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
|
|
autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
|
|
|
|
hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
|
|
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
|
|
autoneg_reg);
|
|
}
|
|
|
|
ixgbe_restart_auto_neg(hw);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
|
|
* @hw: pointer to hardware structure
|
|
* @firmware_version: pointer to the PHY Firmware Version
|
|
**/
|
|
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
|
|
u16 *firmware_version)
|
|
{
|
|
s32 status;
|
|
|
|
DEBUGFUNC("ixgbe_get_phy_firmware_version_tnx");
|
|
|
|
status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
|
|
firmware_version);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
|
|
* @hw: pointer to hardware structure
|
|
* @firmware_version: pointer to the PHY Firmware Version
|
|
**/
|
|
s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
|
|
u16 *firmware_version)
|
|
{
|
|
s32 status;
|
|
|
|
DEBUGFUNC("ixgbe_get_phy_firmware_version_generic");
|
|
|
|
status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
|
|
firmware_version);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_reset_phy_nl - Performs a PHY reset
|
|
* @hw: pointer to hardware structure
|
|
**/
|
|
s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
|
|
{
|
|
u16 phy_offset, control, eword, edata, block_crc;
|
|
bool end_data = false;
|
|
u16 list_offset, data_offset;
|
|
u16 phy_data = 0;
|
|
s32 ret_val = IXGBE_SUCCESS;
|
|
u32 i;
|
|
|
|
DEBUGFUNC("ixgbe_reset_phy_nl");
|
|
|
|
/* Blocked by MNG FW so bail */
|
|
if (ixgbe_check_reset_blocked(hw))
|
|
goto out;
|
|
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
|
|
|
|
/* reset the PHY and poll for completion */
|
|
hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE,
|
|
(phy_data | IXGBE_MDIO_PHY_XS_RESET));
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
|
|
IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
|
|
if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0)
|
|
break;
|
|
msec_delay(10);
|
|
}
|
|
|
|
if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) {
|
|
DEBUGOUT("PHY reset did not complete.\n");
|
|
ret_val = IXGBE_ERR_PHY;
|
|
goto out;
|
|
}
|
|
|
|
/* Get init offsets */
|
|
ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
|
|
&data_offset);
|
|
if (ret_val != IXGBE_SUCCESS)
|
|
goto out;
|
|
|
|
ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
|
|
data_offset++;
|
|
while (!end_data) {
|
|
/*
|
|
* Read control word from PHY init contents offset
|
|
*/
|
|
ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
|
|
if (ret_val)
|
|
goto err_eeprom;
|
|
control = (eword & IXGBE_CONTROL_MASK_NL) >>
|
|
IXGBE_CONTROL_SHIFT_NL;
|
|
edata = eword & IXGBE_DATA_MASK_NL;
|
|
switch (control) {
|
|
case IXGBE_DELAY_NL:
|
|
data_offset++;
|
|
DEBUGOUT1("DELAY: %d MS\n", edata);
|
|
msec_delay(edata);
|
|
break;
|
|
case IXGBE_DATA_NL:
|
|
DEBUGOUT("DATA:\n");
|
|
data_offset++;
|
|
ret_val = hw->eeprom.ops.read(hw, data_offset,
|
|
&phy_offset);
|
|
if (ret_val)
|
|
goto err_eeprom;
|
|
data_offset++;
|
|
for (i = 0; i < edata; i++) {
|
|
ret_val = hw->eeprom.ops.read(hw, data_offset,
|
|
&eword);
|
|
if (ret_val)
|
|
goto err_eeprom;
|
|
hw->phy.ops.write_reg(hw, phy_offset,
|
|
IXGBE_TWINAX_DEV, eword);
|
|
DEBUGOUT2("Wrote %4.4x to %4.4x\n", eword,
|
|
phy_offset);
|
|
data_offset++;
|
|
phy_offset++;
|
|
}
|
|
break;
|
|
case IXGBE_CONTROL_NL:
|
|
data_offset++;
|
|
DEBUGOUT("CONTROL:\n");
|
|
if (edata == IXGBE_CONTROL_EOL_NL) {
|
|
DEBUGOUT("EOL\n");
|
|
end_data = true;
|
|
} else if (edata == IXGBE_CONTROL_SOL_NL) {
|
|
DEBUGOUT("SOL\n");
|
|
} else {
|
|
DEBUGOUT("Bad control value\n");
|
|
ret_val = IXGBE_ERR_PHY;
|
|
goto out;
|
|
}
|
|
break;
|
|
default:
|
|
DEBUGOUT("Bad control type\n");
|
|
ret_val = IXGBE_ERR_PHY;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
|
|
err_eeprom:
|
|
ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
|
|
"eeprom read at offset %d failed", data_offset);
|
|
return IXGBE_ERR_PHY;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_identify_module_generic - Identifies module type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Determines HW type and calls appropriate function.
|
|
**/
|
|
s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_ERR_SFP_NOT_PRESENT;
|
|
|
|
DEBUGFUNC("ixgbe_identify_module_generic");
|
|
|
|
switch (hw->mac.ops.get_media_type(hw)) {
|
|
case ixgbe_media_type_fiber:
|
|
status = ixgbe_identify_sfp_module_generic(hw);
|
|
break;
|
|
|
|
case ixgbe_media_type_fiber_qsfp:
|
|
status = ixgbe_identify_qsfp_module_generic(hw);
|
|
break;
|
|
|
|
default:
|
|
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
|
|
status = IXGBE_ERR_SFP_NOT_PRESENT;
|
|
break;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_identify_sfp_module_generic - Identifies SFP modules
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Searches for and identifies the SFP module and assigns appropriate PHY type.
|
|
**/
|
|
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
|
|
u32 vendor_oui = 0;
|
|
enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
|
|
u8 identifier = 0;
|
|
u8 comp_codes_1g = 0;
|
|
u8 comp_codes_10g = 0;
|
|
u8 oui_bytes[3] = {0, 0, 0};
|
|
u8 cable_tech = 0;
|
|
u8 cable_spec = 0;
|
|
u16 enforce_sfp = 0;
|
|
static bool warned_once = false;
|
|
|
|
DEBUGFUNC("ixgbe_identify_sfp_module_generic");
|
|
|
|
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
|
|
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
|
|
status = IXGBE_ERR_SFP_NOT_PRESENT;
|
|
goto out;
|
|
}
|
|
|
|
/* LAN ID is needed for I2C access */
|
|
hw->mac.ops.set_lan_id(hw);
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_IDENTIFIER,
|
|
&identifier);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
|
|
hw->phy.type = ixgbe_phy_sfp_unsupported;
|
|
status = IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
} else {
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_1GBE_COMP_CODES,
|
|
&comp_codes_1g);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_10GBE_COMP_CODES,
|
|
&comp_codes_10g);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_CABLE_TECHNOLOGY,
|
|
&cable_tech);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
/* ID Module
|
|
* =========
|
|
* 0 SFP_DA_CU
|
|
* 1 SFP_SR
|
|
* 2 SFP_LR
|
|
* 3 SFP_DA_CORE0 - 82599-specific
|
|
* 4 SFP_DA_CORE1 - 82599-specific
|
|
* 5 SFP_SR/LR_CORE0 - 82599-specific
|
|
* 6 SFP_SR/LR_CORE1 - 82599-specific
|
|
* 7 SFP_act_lmt_DA_CORE0 - 82599-specific
|
|
* 8 SFP_act_lmt_DA_CORE1 - 82599-specific
|
|
* 9 SFP_1g_cu_CORE0 - 82599-specific
|
|
* 10 SFP_1g_cu_CORE1 - 82599-specific
|
|
* 11 SFP_1g_sx_CORE0 - 82599-specific
|
|
* 12 SFP_1g_sx_CORE1 - 82599-specific
|
|
*/
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
|
|
hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
|
|
else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
|
|
hw->phy.sfp_type = ixgbe_sfp_type_sr;
|
|
else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
|
|
hw->phy.sfp_type = ixgbe_sfp_type_lr;
|
|
else
|
|
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
|
|
} else {
|
|
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
|
|
if (hw->bus.lan_id == 0)
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_da_cu_core0;
|
|
else
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_da_cu_core1;
|
|
} else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) {
|
|
hw->phy.ops.read_i2c_eeprom(
|
|
hw, IXGBE_SFF_CABLE_SPEC_COMP,
|
|
&cable_spec);
|
|
if (cable_spec &
|
|
IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) {
|
|
if (hw->bus.lan_id == 0)
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_da_act_lmt_core0;
|
|
else
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_da_act_lmt_core1;
|
|
} else {
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_unknown;
|
|
}
|
|
} else if (comp_codes_10g &
|
|
(IXGBE_SFF_10GBASESR_CAPABLE |
|
|
IXGBE_SFF_10GBASELR_CAPABLE)) {
|
|
if (hw->bus.lan_id == 0)
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_srlr_core0;
|
|
else
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_srlr_core1;
|
|
} else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
|
|
if (hw->bus.lan_id == 0)
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_1g_cu_core0;
|
|
else
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_1g_cu_core1;
|
|
} else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) {
|
|
if (hw->bus.lan_id == 0)
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_1g_sx_core0;
|
|
else
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_1g_sx_core1;
|
|
} else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) {
|
|
if (hw->bus.lan_id == 0)
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_1g_lx_core0;
|
|
else
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_1g_lx_core1;
|
|
} else {
|
|
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
|
|
}
|
|
}
|
|
|
|
if (hw->phy.sfp_type != stored_sfp_type)
|
|
hw->phy.sfp_setup_needed = true;
|
|
|
|
/* Determine if the SFP+ PHY is dual speed or not. */
|
|
hw->phy.multispeed_fiber = false;
|
|
if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
|
|
(comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
|
|
((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
|
|
(comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
|
|
hw->phy.multispeed_fiber = true;
|
|
|
|
/* Determine PHY vendor */
|
|
if (hw->phy.type != ixgbe_phy_nl) {
|
|
hw->phy.id = identifier;
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_VENDOR_OUI_BYTE0,
|
|
&oui_bytes[0]);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_VENDOR_OUI_BYTE1,
|
|
&oui_bytes[1]);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_VENDOR_OUI_BYTE2,
|
|
&oui_bytes[2]);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
vendor_oui =
|
|
((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
|
|
(oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
|
|
(oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
|
|
|
|
switch (vendor_oui) {
|
|
case IXGBE_SFF_VENDOR_OUI_TYCO:
|
|
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
|
|
hw->phy.type =
|
|
ixgbe_phy_sfp_passive_tyco;
|
|
break;
|
|
case IXGBE_SFF_VENDOR_OUI_FTL:
|
|
if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
|
|
hw->phy.type = ixgbe_phy_sfp_ftl_active;
|
|
else
|
|
hw->phy.type = ixgbe_phy_sfp_ftl;
|
|
break;
|
|
case IXGBE_SFF_VENDOR_OUI_AVAGO:
|
|
hw->phy.type = ixgbe_phy_sfp_avago;
|
|
break;
|
|
case IXGBE_SFF_VENDOR_OUI_INTEL:
|
|
hw->phy.type = ixgbe_phy_sfp_intel;
|
|
break;
|
|
default:
|
|
hw->phy.type = ixgbe_phy_sfp_unknown;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Allow any DA cable vendor */
|
|
if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE |
|
|
IXGBE_SFF_DA_ACTIVE_CABLE)) {
|
|
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
|
|
hw->phy.type = ixgbe_phy_sfp_passive_unknown;
|
|
else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
|
|
hw->phy.type = ixgbe_phy_sfp_active_unknown;
|
|
status = IXGBE_SUCCESS;
|
|
goto out;
|
|
}
|
|
|
|
/* Verify supported 1G SFP modules */
|
|
if (comp_codes_10g == 0 &&
|
|
!(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
|
|
hw->phy.type = ixgbe_phy_sfp_unsupported;
|
|
status = IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
goto out;
|
|
}
|
|
|
|
/* Anything else 82598-based is supported */
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
status = IXGBE_SUCCESS;
|
|
goto out;
|
|
}
|
|
|
|
ixgbe_get_device_caps(hw, &enforce_sfp);
|
|
if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
|
|
!(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
|
|
hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
|
|
/* Make sure we're a supported PHY type */
|
|
if (hw->phy.type == ixgbe_phy_sfp_intel) {
|
|
status = IXGBE_SUCCESS;
|
|
} else {
|
|
if (hw->allow_unsupported_sfp == true) {
|
|
if (!warned_once)
|
|
EWARN(hw,
|
|
"WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. "
|
|
"Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. "
|
|
"Intel Corporation is not responsible for any harm caused by using untested modules.\n");
|
|
warned_once = true;
|
|
status = IXGBE_SUCCESS;
|
|
} else {
|
|
DEBUGOUT
|
|
("SFP+ module not supported\n");
|
|
hw->phy.type =
|
|
ixgbe_phy_sfp_unsupported;
|
|
status = IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
}
|
|
}
|
|
} else {
|
|
status = IXGBE_SUCCESS;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return status;
|
|
|
|
err_read_i2c_eeprom:
|
|
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
|
|
if (hw->phy.type != ixgbe_phy_nl) {
|
|
hw->phy.id = 0;
|
|
hw->phy.type = ixgbe_phy_unknown;
|
|
}
|
|
return IXGBE_ERR_SFP_NOT_PRESENT;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Determines physical layer capabilities of the current SFP.
|
|
*/
|
|
u64 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
|
|
{
|
|
u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
|
|
u8 comp_codes_10g = 0;
|
|
u8 comp_codes_1g = 0;
|
|
|
|
DEBUGFUNC("ixgbe_get_supported_phy_sfp_layer_generic");
|
|
|
|
hw->phy.ops.identify_sfp(hw);
|
|
if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
|
|
return physical_layer;
|
|
|
|
switch (hw->phy.type) {
|
|
case ixgbe_phy_sfp_passive_tyco:
|
|
case ixgbe_phy_sfp_passive_unknown:
|
|
case ixgbe_phy_qsfp_passive_unknown:
|
|
physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
|
|
break;
|
|
case ixgbe_phy_sfp_ftl_active:
|
|
case ixgbe_phy_sfp_active_unknown:
|
|
case ixgbe_phy_qsfp_active_unknown:
|
|
physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
|
|
break;
|
|
case ixgbe_phy_sfp_avago:
|
|
case ixgbe_phy_sfp_ftl:
|
|
case ixgbe_phy_sfp_intel:
|
|
case ixgbe_phy_sfp_unknown:
|
|
hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
|
|
hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
|
|
if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
|
|
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
|
|
else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
|
|
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
|
|
else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
|
|
physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
|
|
else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
|
|
physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
|
|
break;
|
|
case ixgbe_phy_qsfp_intel:
|
|
case ixgbe_phy_qsfp_unknown:
|
|
hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
|
|
if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
|
|
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
|
|
else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
|
|
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return physical_layer;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Searches for and identifies the QSFP module and assigns appropriate PHY type
|
|
**/
|
|
s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
|
|
u32 vendor_oui = 0;
|
|
enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
|
|
u8 identifier = 0;
|
|
u8 comp_codes_1g = 0;
|
|
u8 comp_codes_10g = 0;
|
|
u8 oui_bytes[3] = {0, 0, 0};
|
|
u16 enforce_sfp = 0;
|
|
u8 connector = 0;
|
|
u8 cable_length = 0;
|
|
u8 device_tech = 0;
|
|
bool active_cable = false;
|
|
static bool warned_once = false;
|
|
|
|
DEBUGFUNC("ixgbe_identify_qsfp_module_generic");
|
|
|
|
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
|
|
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
|
|
status = IXGBE_ERR_SFP_NOT_PRESENT;
|
|
goto out;
|
|
}
|
|
|
|
/* LAN ID is needed for I2C access */
|
|
hw->mac.ops.set_lan_id(hw);
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
|
|
&identifier);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
|
|
hw->phy.type = ixgbe_phy_sfp_unsupported;
|
|
status = IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
goto out;
|
|
}
|
|
|
|
hw->phy.id = identifier;
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP,
|
|
&comp_codes_10g);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
|
|
&comp_codes_1g);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
|
|
hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
|
|
if (hw->bus.lan_id == 0)
|
|
hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
|
|
else
|
|
hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
|
|
} else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
|
|
IXGBE_SFF_10GBASELR_CAPABLE)) {
|
|
if (hw->bus.lan_id == 0)
|
|
hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0;
|
|
else
|
|
hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
|
|
} else {
|
|
if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE)
|
|
active_cable = true;
|
|
|
|
if (!active_cable) {
|
|
/* check for active DA cables that pre-date
|
|
* SFF-8436 v3.6 */
|
|
hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_QSFP_CONNECTOR,
|
|
&connector);
|
|
|
|
hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_QSFP_CABLE_LENGTH,
|
|
&cable_length);
|
|
|
|
hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_QSFP_DEVICE_TECH,
|
|
&device_tech);
|
|
|
|
if ((connector ==
|
|
IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) &&
|
|
(cable_length > 0) &&
|
|
((device_tech >> 4) ==
|
|
IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL))
|
|
active_cable = true;
|
|
}
|
|
|
|
if (active_cable) {
|
|
hw->phy.type = ixgbe_phy_qsfp_active_unknown;
|
|
if (hw->bus.lan_id == 0)
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_da_act_lmt_core0;
|
|
else
|
|
hw->phy.sfp_type =
|
|
ixgbe_sfp_type_da_act_lmt_core1;
|
|
} else {
|
|
/* unsupported module type */
|
|
hw->phy.type = ixgbe_phy_sfp_unsupported;
|
|
status = IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (hw->phy.sfp_type != stored_sfp_type)
|
|
hw->phy.sfp_setup_needed = true;
|
|
|
|
/* Determine if the QSFP+ PHY is dual speed or not. */
|
|
hw->phy.multispeed_fiber = false;
|
|
if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
|
|
(comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
|
|
((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
|
|
(comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
|
|
hw->phy.multispeed_fiber = true;
|
|
|
|
/* Determine PHY vendor for optical modules */
|
|
if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
|
|
IXGBE_SFF_10GBASELR_CAPABLE)) {
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0,
|
|
&oui_bytes[0]);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1,
|
|
&oui_bytes[1]);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
status = hw->phy.ops.read_i2c_eeprom(hw,
|
|
IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2,
|
|
&oui_bytes[2]);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
goto err_read_i2c_eeprom;
|
|
|
|
vendor_oui =
|
|
((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
|
|
(oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
|
|
(oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
|
|
|
|
if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL)
|
|
hw->phy.type = ixgbe_phy_qsfp_intel;
|
|
else
|
|
hw->phy.type = ixgbe_phy_qsfp_unknown;
|
|
|
|
ixgbe_get_device_caps(hw, &enforce_sfp);
|
|
if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
|
|
/* Make sure we're a supported PHY type */
|
|
if (hw->phy.type == ixgbe_phy_qsfp_intel) {
|
|
status = IXGBE_SUCCESS;
|
|
} else {
|
|
if (hw->allow_unsupported_sfp == true) {
|
|
if (!warned_once)
|
|
EWARN(hw,
|
|
"WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. "
|
|
"Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. "
|
|
"Intel Corporation is not responsible for any harm caused by using untested modules.\n");
|
|
warned_once = true;
|
|
status = IXGBE_SUCCESS;
|
|
} else {
|
|
DEBUGOUT("QSFP module not supported\n");
|
|
hw->phy.type =
|
|
ixgbe_phy_sfp_unsupported;
|
|
status = IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
}
|
|
}
|
|
} else {
|
|
status = IXGBE_SUCCESS;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return status;
|
|
|
|
err_read_i2c_eeprom:
|
|
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
|
|
hw->phy.id = 0;
|
|
hw->phy.type = ixgbe_phy_unknown;
|
|
|
|
return IXGBE_ERR_SFP_NOT_PRESENT;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
|
|
* @hw: pointer to hardware structure
|
|
* @list_offset: offset to the SFP ID list
|
|
* @data_offset: offset to the SFP data block
|
|
*
|
|
* Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
|
|
* so it returns the offsets to the phy init sequence block.
|
|
**/
|
|
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
|
|
u16 *list_offset,
|
|
u16 *data_offset)
|
|
{
|
|
u16 sfp_id;
|
|
u16 sfp_type = hw->phy.sfp_type;
|
|
|
|
DEBUGFUNC("ixgbe_get_sfp_init_sequence_offsets");
|
|
|
|
if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
|
|
if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
|
|
return IXGBE_ERR_SFP_NOT_PRESENT;
|
|
|
|
if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
|
|
(hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
|
|
/*
|
|
* Limiting active cables and 1G Phys must be initialized as
|
|
* SR modules
|
|
*/
|
|
if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
|
|
sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
|
|
sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
|
|
sfp_type == ixgbe_sfp_type_1g_sx_core0)
|
|
sfp_type = ixgbe_sfp_type_srlr_core0;
|
|
else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
|
|
sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
|
|
sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
|
|
sfp_type == ixgbe_sfp_type_1g_sx_core1)
|
|
sfp_type = ixgbe_sfp_type_srlr_core1;
|
|
|
|
/* Read offset to PHY init contents */
|
|
if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) {
|
|
ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
|
|
"eeprom read at offset %d failed",
|
|
IXGBE_PHY_INIT_OFFSET_NL);
|
|
return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
|
|
}
|
|
|
|
if ((!*list_offset) || (*list_offset == 0xFFFF))
|
|
return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
|
|
|
|
/* Shift offset to first ID word */
|
|
(*list_offset)++;
|
|
|
|
/*
|
|
* Find the matching SFP ID in the EEPROM
|
|
* and program the init sequence
|
|
*/
|
|
if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
|
|
goto err_phy;
|
|
|
|
while (sfp_id != IXGBE_PHY_INIT_END_NL) {
|
|
if (sfp_id == sfp_type) {
|
|
(*list_offset)++;
|
|
if (hw->eeprom.ops.read(hw, *list_offset, data_offset))
|
|
goto err_phy;
|
|
if ((!*data_offset) || (*data_offset == 0xFFFF)) {
|
|
DEBUGOUT("SFP+ module not supported\n");
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
} else {
|
|
break;
|
|
}
|
|
} else {
|
|
(*list_offset) += 2;
|
|
if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
|
|
goto err_phy;
|
|
}
|
|
}
|
|
|
|
if (sfp_id == IXGBE_PHY_INIT_END_NL) {
|
|
DEBUGOUT("No matching SFP+ module found\n");
|
|
return IXGBE_ERR_SFP_NOT_SUPPORTED;
|
|
}
|
|
|
|
return IXGBE_SUCCESS;
|
|
|
|
err_phy:
|
|
ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
|
|
"eeprom read at offset %d failed", *list_offset);
|
|
return IXGBE_ERR_PHY;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: EEPROM byte offset to read
|
|
* @eeprom_data: value read
|
|
*
|
|
* Performs byte read operation to SFP module's EEPROM over I2C interface.
|
|
**/
|
|
s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 *eeprom_data)
|
|
{
|
|
DEBUGFUNC("ixgbe_read_i2c_eeprom_generic");
|
|
|
|
return hw->phy.ops.read_i2c_byte(hw, byte_offset,
|
|
IXGBE_I2C_EEPROM_DEV_ADDR,
|
|
eeprom_data);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset at address 0xA2
|
|
* @sff8472_data: value read
|
|
*
|
|
* Performs byte read operation to SFP module's SFF-8472 data over I2C
|
|
**/
|
|
static s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 *sff8472_data)
|
|
{
|
|
return hw->phy.ops.read_i2c_byte(hw, byte_offset,
|
|
IXGBE_I2C_EEPROM_DEV_ADDR2,
|
|
sff8472_data);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: EEPROM byte offset to write
|
|
* @eeprom_data: value to write
|
|
*
|
|
* Performs byte write operation to SFP module's EEPROM over I2C interface.
|
|
**/
|
|
s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 eeprom_data)
|
|
{
|
|
DEBUGFUNC("ixgbe_write_i2c_eeprom_generic");
|
|
|
|
return hw->phy.ops.write_i2c_byte(hw, byte_offset,
|
|
IXGBE_I2C_EEPROM_DEV_ADDR,
|
|
eeprom_data);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_is_sfp_probe - Returns true if SFP is being detected
|
|
* @hw: pointer to hardware structure
|
|
* @offset: eeprom offset to be read
|
|
* @addr: I2C address to be read
|
|
*/
|
|
static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
|
|
{
|
|
if (addr == IXGBE_I2C_EEPROM_DEV_ADDR &&
|
|
offset == IXGBE_SFF_IDENTIFIER &&
|
|
hw->phy.sfp_type == ixgbe_sfp_type_not_present)
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to read
|
|
* @dev_addr: address to read from
|
|
* @data: value read
|
|
* @lock: true if to take and release semaphore
|
|
*
|
|
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
|
* a specified device address.
|
|
**/
|
|
static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 *data, bool lock)
|
|
{
|
|
s32 status;
|
|
u32 max_retry = 10;
|
|
u32 retry = 0;
|
|
u32 swfw_mask = hw->phy.phy_semaphore_mask;
|
|
bool nack = 1;
|
|
*data = 0;
|
|
|
|
DEBUGFUNC("ixgbe_read_i2c_byte_generic");
|
|
|
|
if (hw->mac.type >= ixgbe_mac_X550)
|
|
max_retry = 3;
|
|
if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr))
|
|
max_retry = IXGBE_SFP_DETECT_RETRIES;
|
|
|
|
do {
|
|
if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
|
|
return IXGBE_ERR_SWFW_SYNC;
|
|
|
|
ixgbe_i2c_start(hw);
|
|
|
|
/* Device Address and write indication */
|
|
status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
status = ixgbe_get_i2c_ack(hw);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
status = ixgbe_get_i2c_ack(hw);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
ixgbe_i2c_start(hw);
|
|
|
|
/* Device Address and read indication */
|
|
status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1));
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
status = ixgbe_get_i2c_ack(hw);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
ixgbe_clock_in_i2c_byte(hw, data);
|
|
|
|
status = ixgbe_clock_out_i2c_bit(hw, nack);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
ixgbe_i2c_stop(hw);
|
|
if (lock)
|
|
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
|
|
return IXGBE_SUCCESS;
|
|
|
|
fail:
|
|
ixgbe_i2c_bus_clear(hw);
|
|
if (lock) {
|
|
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
|
|
msec_delay(100);
|
|
}
|
|
if (retry < max_retry)
|
|
DEBUGOUT("I2C byte read error - Retrying.\n");
|
|
else
|
|
DEBUGOUT("I2C byte read error.\n");
|
|
retry++;
|
|
} while (retry <= max_retry);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to read
|
|
* @dev_addr: address to read from
|
|
* @data: value read
|
|
*
|
|
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
|
* a specified device address.
|
|
**/
|
|
s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 *data)
|
|
{
|
|
return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
|
|
data, true);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to read
|
|
* @dev_addr: address to read from
|
|
* @data: value read
|
|
*
|
|
* Performs byte read operation to SFP module's EEPROM over I2C interface at
|
|
* a specified device address.
|
|
**/
|
|
s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 *data)
|
|
{
|
|
return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
|
|
data, false);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to write
|
|
* @dev_addr: address to write to
|
|
* @data: value to write
|
|
* @lock: true if to take and release semaphore
|
|
*
|
|
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
|
* a specified device address.
|
|
**/
|
|
static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 data, bool lock)
|
|
{
|
|
s32 status;
|
|
u32 max_retry = 1;
|
|
u32 retry = 0;
|
|
u32 swfw_mask = hw->phy.phy_semaphore_mask;
|
|
|
|
DEBUGFUNC("ixgbe_write_i2c_byte_generic");
|
|
|
|
if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) !=
|
|
IXGBE_SUCCESS)
|
|
return IXGBE_ERR_SWFW_SYNC;
|
|
|
|
do {
|
|
ixgbe_i2c_start(hw);
|
|
|
|
status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
status = ixgbe_get_i2c_ack(hw);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
status = ixgbe_get_i2c_ack(hw);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
status = ixgbe_clock_out_i2c_byte(hw, data);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
status = ixgbe_get_i2c_ack(hw);
|
|
if (status != IXGBE_SUCCESS)
|
|
goto fail;
|
|
|
|
ixgbe_i2c_stop(hw);
|
|
if (lock)
|
|
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
|
|
return IXGBE_SUCCESS;
|
|
|
|
fail:
|
|
ixgbe_i2c_bus_clear(hw);
|
|
if (retry < max_retry)
|
|
DEBUGOUT("I2C byte write error - Retrying.\n");
|
|
else
|
|
DEBUGOUT("I2C byte write error.\n");
|
|
retry++;
|
|
} while (retry <= max_retry);
|
|
|
|
if (lock)
|
|
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to write
|
|
* @dev_addr: address to write to
|
|
* @data: value to write
|
|
*
|
|
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
|
* a specified device address.
|
|
**/
|
|
s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 data)
|
|
{
|
|
return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
|
|
data, true);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
|
|
* @hw: pointer to hardware structure
|
|
* @byte_offset: byte offset to write
|
|
* @dev_addr: address to write to
|
|
* @data: value to write
|
|
*
|
|
* Performs byte write operation to SFP module's EEPROM over I2C interface at
|
|
* a specified device address.
|
|
**/
|
|
s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
|
|
u8 dev_addr, u8 data)
|
|
{
|
|
return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
|
|
data, false);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_i2c_start - Sets I2C start condition
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Sets I2C start condition (High -> Low on SDA while SCL is High)
|
|
* Set bit-bang mode on X550 hardware.
|
|
**/
|
|
static void ixgbe_i2c_start(struct ixgbe_hw *hw)
|
|
{
|
|
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
|
|
DEBUGFUNC("ixgbe_i2c_start");
|
|
|
|
i2cctl |= IXGBE_I2C_BB_EN_BY_MAC(hw);
|
|
|
|
/* Start condition must begin with data and clock high */
|
|
ixgbe_set_i2c_data(hw, &i2cctl, 1);
|
|
ixgbe_raise_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Setup time for start condition (4.7us) */
|
|
usec_delay(IXGBE_I2C_T_SU_STA);
|
|
|
|
ixgbe_set_i2c_data(hw, &i2cctl, 0);
|
|
|
|
/* Hold time for start condition (4us) */
|
|
usec_delay(IXGBE_I2C_T_HD_STA);
|
|
|
|
ixgbe_lower_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Minimum low period of clock is 4.7 us */
|
|
usec_delay(IXGBE_I2C_T_LOW);
|
|
|
|
}
|
|
|
|
/**
|
|
* ixgbe_i2c_stop - Sets I2C stop condition
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Sets I2C stop condition (Low -> High on SDA while SCL is High)
|
|
* Disables bit-bang mode and negates data output enable on X550
|
|
* hardware.
|
|
**/
|
|
static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
|
|
{
|
|
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
|
|
u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
|
|
u32 bb_en_bit = IXGBE_I2C_BB_EN_BY_MAC(hw);
|
|
|
|
DEBUGFUNC("ixgbe_i2c_stop");
|
|
|
|
/* Stop condition must begin with data low and clock high */
|
|
ixgbe_set_i2c_data(hw, &i2cctl, 0);
|
|
ixgbe_raise_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Setup time for stop condition (4us) */
|
|
usec_delay(IXGBE_I2C_T_SU_STO);
|
|
|
|
ixgbe_set_i2c_data(hw, &i2cctl, 1);
|
|
|
|
/* bus free time between stop and start (4.7us)*/
|
|
usec_delay(IXGBE_I2C_T_BUF);
|
|
|
|
if (bb_en_bit || data_oe_bit || clk_oe_bit) {
|
|
i2cctl &= ~bb_en_bit;
|
|
i2cctl |= data_oe_bit | clk_oe_bit;
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
|
|
* @hw: pointer to hardware structure
|
|
* @data: data byte to clock in
|
|
*
|
|
* Clocks in one byte data via I2C data/clock
|
|
**/
|
|
static void ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
|
|
{
|
|
s32 i;
|
|
bool bit = 0;
|
|
|
|
DEBUGFUNC("ixgbe_clock_in_i2c_byte");
|
|
|
|
*data = 0;
|
|
for (i = 7; i >= 0; i--) {
|
|
ixgbe_clock_in_i2c_bit(hw, &bit);
|
|
*data |= bit << i;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
|
|
* @hw: pointer to hardware structure
|
|
* @data: data byte clocked out
|
|
*
|
|
* Clocks out one byte data via I2C data/clock
|
|
**/
|
|
static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
|
|
{
|
|
s32 status = IXGBE_SUCCESS;
|
|
s32 i;
|
|
u32 i2cctl;
|
|
bool bit;
|
|
|
|
DEBUGFUNC("ixgbe_clock_out_i2c_byte");
|
|
|
|
for (i = 7; i >= 0; i--) {
|
|
bit = (data >> i) & 0x1;
|
|
status = ixgbe_clock_out_i2c_bit(hw, bit);
|
|
|
|
if (status != IXGBE_SUCCESS)
|
|
break;
|
|
}
|
|
|
|
/* Release SDA line (set high) */
|
|
i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
|
|
i2cctl |= IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_i2c_ack - Polls for I2C ACK
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Clocks in/out one bit via I2C data/clock
|
|
**/
|
|
static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
|
|
{
|
|
u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
|
|
s32 status = IXGBE_SUCCESS;
|
|
u32 i = 0;
|
|
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
u32 timeout = 10;
|
|
bool ack = 1;
|
|
|
|
DEBUGFUNC("ixgbe_get_i2c_ack");
|
|
|
|
if (data_oe_bit) {
|
|
i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
|
|
i2cctl |= data_oe_bit;
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
}
|
|
ixgbe_raise_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Minimum high period of clock is 4us */
|
|
usec_delay(IXGBE_I2C_T_HIGH);
|
|
|
|
/* Poll for ACK. Note that ACK in I2C spec is
|
|
* transition from 1 to 0 */
|
|
for (i = 0; i < timeout; i++) {
|
|
i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
ack = ixgbe_get_i2c_data(hw, &i2cctl);
|
|
|
|
usec_delay(1);
|
|
if (!ack)
|
|
break;
|
|
}
|
|
|
|
if (ack) {
|
|
DEBUGOUT("I2C ack was not received.\n");
|
|
status = IXGBE_ERR_I2C;
|
|
}
|
|
|
|
ixgbe_lower_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Minimum low period of clock is 4.7 us */
|
|
usec_delay(IXGBE_I2C_T_LOW);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
|
|
* @hw: pointer to hardware structure
|
|
* @data: read data value
|
|
*
|
|
* Clocks in one bit via I2C data/clock
|
|
**/
|
|
static void ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
|
|
{
|
|
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
|
|
|
|
DEBUGFUNC("ixgbe_clock_in_i2c_bit");
|
|
|
|
if (data_oe_bit) {
|
|
i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
|
|
i2cctl |= data_oe_bit;
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
}
|
|
ixgbe_raise_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Minimum high period of clock is 4us */
|
|
usec_delay(IXGBE_I2C_T_HIGH);
|
|
|
|
i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
*data = ixgbe_get_i2c_data(hw, &i2cctl);
|
|
|
|
ixgbe_lower_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Minimum low period of clock is 4.7 us */
|
|
usec_delay(IXGBE_I2C_T_LOW);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
|
|
* @hw: pointer to hardware structure
|
|
* @data: data value to write
|
|
*
|
|
* Clocks out one bit via I2C data/clock
|
|
**/
|
|
static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
|
|
{
|
|
s32 status;
|
|
u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
|
|
DEBUGFUNC("ixgbe_clock_out_i2c_bit");
|
|
|
|
status = ixgbe_set_i2c_data(hw, &i2cctl, data);
|
|
if (status == IXGBE_SUCCESS) {
|
|
ixgbe_raise_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Minimum high period of clock is 4us */
|
|
usec_delay(IXGBE_I2C_T_HIGH);
|
|
|
|
ixgbe_lower_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Minimum low period of clock is 4.7 us.
|
|
* This also takes care of the data hold time.
|
|
*/
|
|
usec_delay(IXGBE_I2C_T_LOW);
|
|
} else {
|
|
status = IXGBE_ERR_I2C;
|
|
ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
|
|
"I2C data was not set to %X\n", data);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_raise_i2c_clk - Raises the I2C SCL clock
|
|
* @hw: pointer to hardware structure
|
|
* @i2cctl: Current value of I2CCTL register
|
|
*
|
|
* Raises the I2C clock line '0'->'1'
|
|
* Negates the I2C clock output enable on X550 hardware.
|
|
**/
|
|
static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
|
|
{
|
|
u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
|
|
u32 i = 0;
|
|
u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT;
|
|
u32 i2cctl_r = 0;
|
|
|
|
DEBUGFUNC("ixgbe_raise_i2c_clk");
|
|
|
|
if (clk_oe_bit) {
|
|
*i2cctl |= clk_oe_bit;
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
|
|
}
|
|
|
|
for (i = 0; i < timeout; i++) {
|
|
*i2cctl |= IXGBE_I2C_CLK_OUT_BY_MAC(hw);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
/* SCL rise time (1000ns) */
|
|
usec_delay(IXGBE_I2C_T_RISE);
|
|
|
|
i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
if (i2cctl_r & IXGBE_I2C_CLK_IN_BY_MAC(hw))
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
|
|
* @hw: pointer to hardware structure
|
|
* @i2cctl: Current value of I2CCTL register
|
|
*
|
|
* Lowers the I2C clock line '1'->'0'
|
|
* Asserts the I2C clock output enable on X550 hardware.
|
|
**/
|
|
static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
|
|
{
|
|
DEBUGFUNC("ixgbe_lower_i2c_clk");
|
|
|
|
*i2cctl &= ~(IXGBE_I2C_CLK_OUT_BY_MAC(hw));
|
|
*i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
/* SCL fall time (300ns) */
|
|
usec_delay(IXGBE_I2C_T_FALL);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_i2c_data - Sets the I2C data bit
|
|
* @hw: pointer to hardware structure
|
|
* @i2cctl: Current value of I2CCTL register
|
|
* @data: I2C data value (0 or 1) to set
|
|
*
|
|
* Sets the I2C data bit
|
|
* Asserts the I2C data output enable on X550 hardware.
|
|
**/
|
|
static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
|
|
{
|
|
u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
|
|
s32 status = IXGBE_SUCCESS;
|
|
|
|
DEBUGFUNC("ixgbe_set_i2c_data");
|
|
|
|
if (data)
|
|
*i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
|
|
else
|
|
*i2cctl &= ~(IXGBE_I2C_DATA_OUT_BY_MAC(hw));
|
|
*i2cctl &= ~data_oe_bit;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
|
|
usec_delay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
|
|
|
|
if (!data) /* Can't verify data in this case */
|
|
return IXGBE_SUCCESS;
|
|
if (data_oe_bit) {
|
|
*i2cctl |= data_oe_bit;
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
}
|
|
|
|
/* Verify data was set correctly */
|
|
*i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
if (data != ixgbe_get_i2c_data(hw, i2cctl)) {
|
|
status = IXGBE_ERR_I2C;
|
|
ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
|
|
"Error - I2C data was not set to %X.\n",
|
|
data);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_get_i2c_data - Reads the I2C SDA data bit
|
|
* @hw: pointer to hardware structure
|
|
* @i2cctl: Current value of I2CCTL register
|
|
*
|
|
* Returns the I2C data bit value
|
|
* Negates the I2C data output enable on X550 hardware.
|
|
**/
|
|
static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
|
|
{
|
|
u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
|
|
bool data;
|
|
|
|
DEBUGFUNC("ixgbe_get_i2c_data");
|
|
|
|
if (data_oe_bit) {
|
|
*i2cctl |= data_oe_bit;
|
|
IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
usec_delay(IXGBE_I2C_T_FALL);
|
|
}
|
|
|
|
if (*i2cctl & IXGBE_I2C_DATA_IN_BY_MAC(hw))
|
|
data = 1;
|
|
else
|
|
data = 0;
|
|
|
|
return data;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_i2c_bus_clear - Clears the I2C bus
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Clears the I2C bus by sending nine clock pulses.
|
|
* Used when data line is stuck low.
|
|
**/
|
|
void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
|
|
{
|
|
u32 i2cctl;
|
|
u32 i;
|
|
|
|
DEBUGFUNC("ixgbe_i2c_bus_clear");
|
|
|
|
ixgbe_i2c_start(hw);
|
|
i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
|
|
|
|
ixgbe_set_i2c_data(hw, &i2cctl, 1);
|
|
|
|
for (i = 0; i < 9; i++) {
|
|
ixgbe_raise_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Min high period of clock is 4us */
|
|
usec_delay(IXGBE_I2C_T_HIGH);
|
|
|
|
ixgbe_lower_i2c_clk(hw, &i2cctl);
|
|
|
|
/* Min low period of clock is 4.7us*/
|
|
usec_delay(IXGBE_I2C_T_LOW);
|
|
}
|
|
|
|
ixgbe_i2c_start(hw);
|
|
|
|
/* Put the i2c bus back to default state */
|
|
ixgbe_i2c_stop(hw);
|
|
}
|
|
|
|
/**
|
|
* ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
|
|
* @hw: pointer to hardware structure
|
|
*
|
|
* Checks if the LASI temp alarm status was triggered due to overtemp
|
|
**/
|
|
s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
|
|
{
|
|
s32 status = IXGBE_SUCCESS;
|
|
u16 phy_data = 0;
|
|
|
|
DEBUGFUNC("ixgbe_tn_check_overtemp");
|
|
|
|
if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM)
|
|
goto out;
|
|
|
|
/* Check that the LASI temp alarm status was triggered */
|
|
hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
|
|
IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_data);
|
|
|
|
if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
|
|
goto out;
|
|
|
|
status = IXGBE_ERR_OVERTEMP;
|
|
ERROR_REPORT1(IXGBE_ERROR_CAUTION, "Device over temperature");
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* ixgbe_set_copper_phy_power - Control power for copper phy
|
|
* @hw: pointer to hardware structure
|
|
* @on: true for on, false for off
|
|
*/
|
|
s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
|
|
{
|
|
u32 status;
|
|
u16 reg;
|
|
|
|
if (!on && ixgbe_mng_present(hw))
|
|
return 0;
|
|
|
|
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
|
|
®);
|
|
if (status)
|
|
return status;
|
|
|
|
if (on) {
|
|
reg &= ~IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
|
|
} else {
|
|
if (ixgbe_check_reset_blocked(hw))
|
|
return 0;
|
|
reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
|
|
}
|
|
|
|
status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
|
|
reg);
|
|
return status;
|
|
}
|