645 lines
18 KiB
C
645 lines
18 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause
|
|
*
|
|
* Copyright (c) 2018 Rubicon Communications, LLC (Netgate)
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Marvell Xenon SDHCI controller driver.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/resource.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/taskqueue.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <dev/extres/regulator/regulator.h>
|
|
|
|
#include <dev/mmc/bridge.h>
|
|
#include <dev/mmc/mmcbrvar.h>
|
|
#include <dev/mmc/mmcreg.h>
|
|
|
|
#include <dev/sdhci/sdhci.h>
|
|
#include <dev/sdhci/sdhci_xenon.h>
|
|
|
|
#include "mmcbr_if.h"
|
|
#include "sdhci_if.h"
|
|
|
|
#include "opt_mmccam.h"
|
|
#include "opt_soc.h"
|
|
|
|
#define MAX_SLOTS 6
|
|
|
|
static uint8_t
|
|
sdhci_xenon_read_1(device_t dev, struct sdhci_slot *slot __unused,
|
|
bus_size_t off)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
|
|
return (bus_read_1(sc->mem_res, off));
|
|
}
|
|
|
|
static void
|
|
sdhci_xenon_write_1(device_t dev, struct sdhci_slot *slot __unused,
|
|
bus_size_t off, uint8_t val)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
|
|
bus_write_1(sc->mem_res, off, val);
|
|
}
|
|
|
|
static uint16_t
|
|
sdhci_xenon_read_2(device_t dev, struct sdhci_slot *slot __unused,
|
|
bus_size_t off)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
|
|
return (bus_read_2(sc->mem_res, off));
|
|
}
|
|
|
|
static void
|
|
sdhci_xenon_write_2(device_t dev, struct sdhci_slot *slot __unused,
|
|
bus_size_t off, uint16_t val)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
|
|
bus_write_2(sc->mem_res, off, val);
|
|
}
|
|
|
|
static uint32_t
|
|
sdhci_xenon_read_4(device_t dev, struct sdhci_slot *slot __unused,
|
|
bus_size_t off)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
|
|
return bus_read_4(sc->mem_res, off);
|
|
}
|
|
|
|
static void
|
|
sdhci_xenon_write_4(device_t dev, struct sdhci_slot *slot __unused,
|
|
bus_size_t off, uint32_t val)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
|
|
bus_write_4(sc->mem_res, off, val);
|
|
}
|
|
|
|
static void
|
|
sdhci_xenon_read_multi_4(device_t dev, struct sdhci_slot *slot __unused,
|
|
bus_size_t off, uint32_t *data, bus_size_t count)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
|
|
bus_read_multi_4(sc->mem_res, off, data, count);
|
|
}
|
|
|
|
static void
|
|
sdhci_xenon_write_multi_4(device_t dev, struct sdhci_slot *slot __unused,
|
|
bus_size_t off, uint32_t *data, bus_size_t count)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
|
|
bus_write_multi_4(sc->mem_res, off, data, count);
|
|
}
|
|
|
|
static void
|
|
sdhci_xenon_intr(void *arg)
|
|
{
|
|
struct sdhci_xenon_softc *sc = (struct sdhci_xenon_softc *)arg;
|
|
|
|
sdhci_generic_intr(sc->slot);
|
|
}
|
|
|
|
static int
|
|
sdhci_xenon_get_ro(device_t bus, device_t dev)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(bus);
|
|
|
|
return (sdhci_generic_get_ro(bus, dev) ^ sc->wp_inverted);
|
|
}
|
|
|
|
static void
|
|
sdhci_xenon_set_uhs_timing(device_t brdev, struct sdhci_slot *slot)
|
|
{
|
|
const struct mmc_ios *ios;
|
|
uint16_t hostctrl2;
|
|
|
|
if (slot->version < SDHCI_SPEC_300)
|
|
return;
|
|
|
|
mtx_assert(&slot->mtx, MA_OWNED);
|
|
ios = &slot->host.ios;
|
|
|
|
/* Update timing parameteres in SDHCI_HOST_CONTROL2 register. */
|
|
hostctrl2 = sdhci_xenon_read_2(brdev, slot, SDHCI_HOST_CONTROL2);
|
|
hostctrl2 &= ~SDHCI_CTRL2_UHS_MASK;
|
|
if (ios->clock > SD_SDR50_MAX) {
|
|
if (ios->timing == bus_timing_mmc_hs400 ||
|
|
ios->timing == bus_timing_mmc_hs400es)
|
|
hostctrl2 |= XENON_CTRL2_MMC_HS400;
|
|
else if (ios->timing == bus_timing_mmc_hs200)
|
|
hostctrl2 |= XENON_CTRL2_MMC_HS200;
|
|
else
|
|
hostctrl2 |= SDHCI_CTRL2_UHS_SDR104;
|
|
}
|
|
else if (ios->clock > SD_SDR25_MAX)
|
|
hostctrl2 |= SDHCI_CTRL2_UHS_SDR50;
|
|
else if (ios->clock > SD_SDR12_MAX) {
|
|
if (ios->timing == bus_timing_uhs_ddr50 ||
|
|
ios->timing == bus_timing_mmc_ddr52)
|
|
hostctrl2 |= SDHCI_CTRL2_UHS_DDR50;
|
|
else
|
|
hostctrl2 |= SDHCI_CTRL2_UHS_SDR25;
|
|
} else if (ios->clock > SD_MMC_CARD_ID_FREQUENCY)
|
|
hostctrl2 |= SDHCI_CTRL2_UHS_SDR12;
|
|
sdhci_xenon_write_2(brdev, slot, SDHCI_HOST_CONTROL2, hostctrl2);
|
|
}
|
|
|
|
static int
|
|
sdhci_xenon_phy_init(device_t brdev, struct mmc_ios *ios)
|
|
{
|
|
int i;
|
|
struct sdhci_xenon_softc *sc;
|
|
uint32_t reg;
|
|
|
|
sc = device_get_softc(brdev);
|
|
reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST);
|
|
reg |= XENON_SAMPL_INV_QSP_PHASE_SELECT;
|
|
switch (ios->timing) {
|
|
case bus_timing_normal:
|
|
case bus_timing_hs:
|
|
case bus_timing_uhs_sdr12:
|
|
case bus_timing_uhs_sdr25:
|
|
case bus_timing_uhs_sdr50:
|
|
reg |= XENON_TIMING_ADJUST_SLOW_MODE;
|
|
break;
|
|
default:
|
|
reg &= ~XENON_TIMING_ADJUST_SLOW_MODE;
|
|
}
|
|
if (sc->slow_mode)
|
|
reg |= XENON_TIMING_ADJUST_SLOW_MODE;
|
|
bus_write_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST, reg);
|
|
|
|
reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST);
|
|
reg |= XENON_PHY_INITIALIZATION;
|
|
bus_write_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST, reg);
|
|
|
|
/* Wait for the eMMC PHY init. */
|
|
for (i = 100; i > 0; i--) {
|
|
DELAY(100);
|
|
|
|
reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST);
|
|
if ((reg & XENON_PHY_INITIALIZATION) == 0)
|
|
break;
|
|
}
|
|
|
|
if (i == 0) {
|
|
device_printf(brdev, "eMMC PHY failed to initialize\n");
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sdhci_xenon_phy_set(device_t brdev, struct mmc_ios *ios)
|
|
{
|
|
struct sdhci_xenon_softc *sc;
|
|
uint32_t reg;
|
|
|
|
sc = device_get_softc(brdev);
|
|
/* Setup pad, set bit[28] and bits[26:24] */
|
|
reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL);
|
|
reg |= (XENON_FC_DQ_RECEN | XENON_FC_CMD_RECEN |
|
|
XENON_FC_QSP_RECEN | XENON_OEN_QSN);
|
|
/* All FC_XX_RECEIVCE should be set as CMOS Type */
|
|
reg |= XENON_FC_ALL_CMOS_RECEIVER;
|
|
bus_write_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL, reg);
|
|
|
|
/* Set CMD and DQ Pull Up */
|
|
reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL1);
|
|
reg |= (XENON_EMMC_FC_CMD_PU | XENON_EMMC_FC_DQ_PU);
|
|
reg &= ~(XENON_EMMC_FC_CMD_PD | XENON_EMMC_FC_DQ_PD);
|
|
bus_write_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL1, reg);
|
|
|
|
if (ios->timing == bus_timing_normal)
|
|
return (sdhci_xenon_phy_init(brdev, ios));
|
|
|
|
/* Clear SDIO mode, no SDIO support for now. */
|
|
reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST);
|
|
reg &= ~XENON_TIMING_ADJUST_SDIO_MODE;
|
|
bus_write_4(sc->mem_res, XENON_EMMC_PHY_TIMING_ADJUST, reg);
|
|
|
|
/*
|
|
* Set preferred ZNR and ZPR value.
|
|
* The ZNR and ZPR value vary between different boards.
|
|
* Define them both in the DTS for the board!
|
|
*/
|
|
reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL2);
|
|
reg &= ~((XENON_ZNR_MASK << XENON_ZNR_SHIFT) | XENON_ZPR_MASK);
|
|
reg |= ((sc->znr << XENON_ZNR_SHIFT) | sc->zpr);
|
|
bus_write_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL2, reg);
|
|
|
|
/* Disable the SD clock to set EMMC_PHY_FUNC_CONTROL. */
|
|
reg = bus_read_4(sc->mem_res, SDHCI_CLOCK_CONTROL);
|
|
reg &= ~SDHCI_CLOCK_CARD_EN;
|
|
bus_write_4(sc->mem_res, SDHCI_CLOCK_CONTROL, reg);
|
|
|
|
reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_FUNC_CONTROL);
|
|
switch (ios->timing) {
|
|
case bus_timing_mmc_hs400:
|
|
reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) |
|
|
XENON_CMD_DDR_MODE;
|
|
reg &= ~XENON_DQ_ASYNC_MODE;
|
|
break;
|
|
case bus_timing_uhs_ddr50:
|
|
case bus_timing_mmc_ddr52:
|
|
reg |= (XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) |
|
|
XENON_CMD_DDR_MODE | XENON_DQ_ASYNC_MODE;
|
|
break;
|
|
default:
|
|
reg &= ~((XENON_DQ_DDR_MODE_MASK << XENON_DQ_DDR_MODE_SHIFT) |
|
|
XENON_CMD_DDR_MODE);
|
|
reg |= XENON_DQ_ASYNC_MODE;
|
|
}
|
|
bus_write_4(sc->mem_res, XENON_EMMC_PHY_FUNC_CONTROL, reg);
|
|
|
|
/* Enable SD clock. */
|
|
reg = bus_read_4(sc->mem_res, SDHCI_CLOCK_CONTROL);
|
|
reg |= SDHCI_CLOCK_CARD_EN;
|
|
bus_write_4(sc->mem_res, SDHCI_CLOCK_CONTROL, reg);
|
|
|
|
if (ios->timing == bus_timing_mmc_hs400)
|
|
bus_write_4(sc->mem_res, XENON_EMMC_PHY_LOGIC_TIMING_ADJUST,
|
|
XENON_LOGIC_TIMING_VALUE);
|
|
else {
|
|
/* Disable both SDHC Data Strobe and Enhanced Strobe. */
|
|
reg = bus_read_4(sc->mem_res, XENON_SLOT_EMMC_CTRL);
|
|
reg &= ~(XENON_ENABLE_DATA_STROBE | XENON_ENABLE_RESP_STROBE);
|
|
bus_write_4(sc->mem_res, XENON_SLOT_EMMC_CTRL, reg);
|
|
|
|
/* Clear Strobe line Pull down or Pull up. */
|
|
reg = bus_read_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL1);
|
|
reg &= ~(XENON_EMMC_FC_QSP_PD | XENON_EMMC_FC_QSP_PU);
|
|
bus_write_4(sc->mem_res, XENON_EMMC_PHY_PAD_CONTROL1, reg);
|
|
}
|
|
|
|
return (sdhci_xenon_phy_init(brdev, ios));
|
|
}
|
|
|
|
static int
|
|
sdhci_xenon_update_ios(device_t brdev, device_t reqdev)
|
|
{
|
|
int err;
|
|
struct sdhci_xenon_softc *sc;
|
|
struct mmc_ios *ios;
|
|
struct sdhci_slot *slot;
|
|
uint32_t reg;
|
|
|
|
err = sdhci_generic_update_ios(brdev, reqdev);
|
|
if (err != 0)
|
|
return (err);
|
|
|
|
sc = device_get_softc(brdev);
|
|
slot = device_get_ivars(reqdev);
|
|
ios = &slot->host.ios;
|
|
|
|
switch (ios->power_mode) {
|
|
case power_on:
|
|
break;
|
|
case power_off:
|
|
if (bootverbose)
|
|
device_printf(sc->dev, "Powering down sd/mmc\n");
|
|
|
|
if (sc->vmmc_supply)
|
|
regulator_disable(sc->vmmc_supply);
|
|
if (sc->vqmmc_supply)
|
|
regulator_disable(sc->vqmmc_supply);
|
|
break;
|
|
case power_up:
|
|
if (bootverbose)
|
|
device_printf(sc->dev, "Powering up sd/mmc\n");
|
|
|
|
if (sc->vmmc_supply)
|
|
regulator_enable(sc->vmmc_supply);
|
|
if (sc->vqmmc_supply)
|
|
regulator_enable(sc->vqmmc_supply);
|
|
break;
|
|
};
|
|
|
|
/* Update the PHY settings. */
|
|
if (ios->clock != 0)
|
|
sdhci_xenon_phy_set(brdev, ios);
|
|
|
|
if (ios->clock > SD_MMC_CARD_ID_FREQUENCY) {
|
|
/* Enable SDCLK_IDLEOFF. */
|
|
reg = bus_read_4(sc->mem_res, XENON_SYS_OP_CTRL);
|
|
reg |= 1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sc->slot_id);
|
|
bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sdhci_xenon_switch_vccq(device_t brdev, device_t reqdev)
|
|
{
|
|
struct sdhci_xenon_softc *sc;
|
|
struct sdhci_slot *slot;
|
|
uint16_t hostctrl2;
|
|
int uvolt, err;
|
|
|
|
slot = device_get_ivars(reqdev);
|
|
|
|
if (slot->version < SDHCI_SPEC_300)
|
|
return (0);
|
|
|
|
sc = device_get_softc(brdev);
|
|
|
|
if (sc->vqmmc_supply == NULL && !sc->skip_regulators)
|
|
return (EOPNOTSUPP);
|
|
|
|
err = 0;
|
|
|
|
hostctrl2 = bus_read_2(sc->mem_res, SDHCI_HOST_CONTROL2);
|
|
switch (slot->host.ios.vccq) {
|
|
case vccq_330:
|
|
if (!(hostctrl2 & SDHCI_CTRL2_S18_ENABLE))
|
|
return (0);
|
|
hostctrl2 &= ~SDHCI_CTRL2_S18_ENABLE;
|
|
bus_write_2(sc->mem_res, SDHCI_HOST_CONTROL2, hostctrl2);
|
|
|
|
if (!sc->skip_regulators) {
|
|
uvolt = 3300000;
|
|
err = regulator_set_voltage(sc->vqmmc_supply,
|
|
uvolt, uvolt);
|
|
if (err != 0) {
|
|
device_printf(sc->dev,
|
|
"Cannot set vqmmc to %d<->%d\n",
|
|
uvolt,
|
|
uvolt);
|
|
return (err);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* According to the 'SD Host Controller Simplified
|
|
* Specification 4.20 the host driver should take more
|
|
* than 5ms for stable time of host voltage regulator
|
|
* from changing 1.8V Signaling Enable.
|
|
*/
|
|
DELAY(5000);
|
|
hostctrl2 = bus_read_2(sc->mem_res, SDHCI_HOST_CONTROL2);
|
|
if (!(hostctrl2 & SDHCI_CTRL2_S18_ENABLE))
|
|
return (0);
|
|
return (EAGAIN);
|
|
case vccq_180:
|
|
if (!(slot->host.caps & MMC_CAP_SIGNALING_180)) {
|
|
return (EINVAL);
|
|
}
|
|
if (hostctrl2 & SDHCI_CTRL2_S18_ENABLE)
|
|
return (0);
|
|
hostctrl2 |= SDHCI_CTRL2_S18_ENABLE;
|
|
bus_write_2(sc->mem_res, SDHCI_HOST_CONTROL2, hostctrl2);
|
|
|
|
if (!sc->skip_regulators) {
|
|
uvolt = 1800000;
|
|
err = regulator_set_voltage(sc->vqmmc_supply,
|
|
uvolt, uvolt);
|
|
if (err != 0) {
|
|
device_printf(sc->dev,
|
|
"Cannot set vqmmc to %d<->%d\n",
|
|
uvolt,
|
|
uvolt);
|
|
return (err);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* According to the 'SD Host Controller Simplified
|
|
* Specification 4.20 the host driver should take more
|
|
* than 5ms for stable time of host voltage regulator
|
|
* from changing 1.8V Signaling Enable.
|
|
*/
|
|
DELAY(5000);
|
|
hostctrl2 = bus_read_2(sc->mem_res, SDHCI_HOST_CONTROL2);
|
|
if (hostctrl2 & SDHCI_CTRL2_S18_ENABLE)
|
|
return (0);
|
|
return (EAGAIN);
|
|
default:
|
|
device_printf(brdev,
|
|
"Attempt to set unsupported signaling voltage\n");
|
|
return (EINVAL);
|
|
}
|
|
}
|
|
|
|
static void
|
|
sdhci_xenon_parse_prop(device_t dev)
|
|
{
|
|
struct sdhci_xenon_softc *sc;
|
|
uint32_t val;
|
|
|
|
sc = device_get_softc(dev);
|
|
val = 0;
|
|
|
|
if (device_get_property(dev, "quirks",
|
|
&val, sizeof(val), DEVICE_PROP_UINT32) > 0)
|
|
sc->slot->quirks = val;
|
|
sc->znr = XENON_ZNR_DEF_VALUE;
|
|
if (device_get_property(dev, "marvell,xenon-phy-znr",
|
|
&val, sizeof(val), DEVICE_PROP_UINT32) > 0)
|
|
sc->znr = val & XENON_ZNR_MASK;
|
|
sc->zpr = XENON_ZPR_DEF_VALUE;
|
|
if (device_get_property(dev, "marvell,xenon-phy-zpr",
|
|
&val, sizeof(val), DEVICE_PROP_UINT32) > 0)
|
|
sc->zpr = val & XENON_ZPR_MASK;
|
|
if (device_has_property(dev, "marvell,xenon-phy-slow-mode"))
|
|
sc->slow_mode = true;
|
|
}
|
|
|
|
int
|
|
sdhci_xenon_attach(device_t dev)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
int err, rid;
|
|
uint32_t reg;
|
|
|
|
sc->dev = dev;
|
|
sc->slot_id = 0;
|
|
|
|
/* Allocate IRQ. */
|
|
rid = 0;
|
|
sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->irq_res == NULL) {
|
|
device_printf(dev, "Can't allocate IRQ\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/* Allocate memory. */
|
|
rid = 0;
|
|
sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE);
|
|
if (sc->mem_res == NULL) {
|
|
bus_release_resource(dev, SYS_RES_IRQ,
|
|
rman_get_rid(sc->irq_res), sc->irq_res);
|
|
device_printf(dev, "Can't allocate memory for slot\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
sdhci_xenon_parse_prop(dev);
|
|
|
|
sc->slot->max_clk = XENON_MMC_MAX_CLK;
|
|
if (sc->slot->host.f_max > 0)
|
|
sc->slot->max_clk = sc->slot->host.f_max;
|
|
|
|
if (sdhci_init_slot(dev, sc->slot, 0))
|
|
goto fail;
|
|
|
|
/* 1.2V signaling is not supported. */
|
|
sc->slot->host.caps &= ~MMC_CAP_SIGNALING_120;
|
|
|
|
/* Disable UHS in case of the PHY slow mode. */
|
|
if (sc->slow_mode)
|
|
sc->slot->host.caps &= ~MMC_CAP_SIGNALING_180;
|
|
|
|
/* Activate the interrupt */
|
|
err = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
|
|
NULL, sdhci_xenon_intr, sc, &sc->intrhand);
|
|
if (err) {
|
|
device_printf(dev, "Cannot setup IRQ\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Disable Auto Clock Gating. */
|
|
reg = bus_read_4(sc->mem_res, XENON_SYS_OP_CTRL);
|
|
reg |= XENON_AUTO_CLKGATE_DISABLE;
|
|
bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg);
|
|
|
|
/* Enable this SD controller. */
|
|
reg |= (1 << sc->slot_id);
|
|
bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg);
|
|
|
|
/* Enable Parallel Transfer. */
|
|
reg = bus_read_4(sc->mem_res, XENON_SYS_EXT_OP_CTRL);
|
|
reg |= (1 << sc->slot_id);
|
|
bus_write_4(sc->mem_res, XENON_SYS_EXT_OP_CTRL, reg);
|
|
|
|
/* Enable Auto Clock Gating. */
|
|
reg &= ~XENON_AUTO_CLKGATE_DISABLE;
|
|
bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg);
|
|
|
|
/* Disable SDCLK_IDLEOFF before the card initialization. */
|
|
reg = bus_read_4(sc->mem_res, XENON_SYS_OP_CTRL);
|
|
reg &= ~(1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sc->slot_id));
|
|
bus_write_4(sc->mem_res, XENON_SYS_OP_CTRL, reg);
|
|
|
|
/* Mask command conflict errors. */
|
|
reg = bus_read_4(sc->mem_res, XENON_SYS_EXT_OP_CTRL);
|
|
reg |= XENON_MASK_CMD_CONFLICT_ERR;
|
|
bus_write_4(sc->mem_res, XENON_SYS_EXT_OP_CTRL, reg);
|
|
|
|
/* Process cards detection. */
|
|
sdhci_start_slot(sc->slot);
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq_res),
|
|
sc->irq_res);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(sc->mem_res),
|
|
sc->mem_res);
|
|
free(sc->slot, M_DEVBUF);
|
|
sc->slot = NULL;
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
int
|
|
sdhci_xenon_detach(device_t dev)
|
|
{
|
|
struct sdhci_xenon_softc *sc = device_get_softc(dev);
|
|
|
|
bus_generic_detach(dev);
|
|
bus_teardown_intr(dev, sc->irq_res, sc->intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq_res),
|
|
sc->irq_res);
|
|
sdhci_cleanup_slot(sc->slot);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(sc->mem_res),
|
|
sc->mem_res);
|
|
free(sc->slot, M_DEVBUF);
|
|
sc->slot = NULL;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t sdhci_xenon_methods[] = {
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_read_ivar, sdhci_generic_read_ivar),
|
|
DEVMETHOD(bus_write_ivar, sdhci_generic_write_ivar),
|
|
|
|
/* mmcbr_if */
|
|
DEVMETHOD(mmcbr_update_ios, sdhci_xenon_update_ios),
|
|
DEVMETHOD(mmcbr_request, sdhci_generic_request),
|
|
DEVMETHOD(mmcbr_get_ro, sdhci_xenon_get_ro),
|
|
DEVMETHOD(mmcbr_acquire_host, sdhci_generic_acquire_host),
|
|
DEVMETHOD(mmcbr_release_host, sdhci_generic_release_host),
|
|
DEVMETHOD(mmcbr_switch_vccq, sdhci_xenon_switch_vccq),
|
|
DEVMETHOD(mmcbr_tune, sdhci_generic_tune),
|
|
DEVMETHOD(mmcbr_retune, sdhci_generic_retune),
|
|
|
|
/* SDHCI registers accessors */
|
|
DEVMETHOD(sdhci_read_1, sdhci_xenon_read_1),
|
|
DEVMETHOD(sdhci_read_2, sdhci_xenon_read_2),
|
|
DEVMETHOD(sdhci_read_4, sdhci_xenon_read_4),
|
|
DEVMETHOD(sdhci_read_multi_4, sdhci_xenon_read_multi_4),
|
|
DEVMETHOD(sdhci_write_1, sdhci_xenon_write_1),
|
|
DEVMETHOD(sdhci_write_2, sdhci_xenon_write_2),
|
|
DEVMETHOD(sdhci_write_4, sdhci_xenon_write_4),
|
|
DEVMETHOD(sdhci_write_multi_4, sdhci_xenon_write_multi_4),
|
|
DEVMETHOD(sdhci_set_uhs_timing, sdhci_xenon_set_uhs_timing),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
DEFINE_CLASS_0(sdhci_xenon, sdhci_xenon_driver, sdhci_xenon_methods,
|
|
sizeof(struct sdhci_xenon_softc));
|
|
|
|
SDHCI_DEPEND(sdhci_xenon);
|
|
#ifndef MMCCAM
|
|
MMC_DECLARE_BRIDGE(sdhci_xenon);
|
|
#endif
|