freebsd-dev/sys/dev/joy/joy.c
Alan Somers 6040822c4e Make timespecadd(3) and friends public
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.

Our kernel currently defines two-argument versions of timespecadd and
timespecsub.  NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions.  Solaris also defines a three-argument version, but
only in its kernel.  This revision changes our definition to match the
common three-argument version.

Bump _FreeBSD_version due to the breaking KPI change.

Discussed with:	cem, jilles, ian, bde
Differential Revision:	https://reviews.freebsd.org/D14725
2018-07-30 15:46:40 +00:00

252 lines
6.4 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1995 Jean-Marc Zucconi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/uio.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <sys/time.h>
#include <sys/joystick.h>
#include <dev/joy/joyvar.h>
/* The game port can manage 4 buttons and 4 variable resistors (usually 2
* joysticks, each with 2 buttons and 2 pots.) via the port at address 0x201.
* Getting the state of the buttons is done by reading the game port:
* buttons 1-4 correspond to bits 4-7 and resistors 1-4 (X1, Y1, X2, Y2)
* to bits 0-3.
* if button 1 (resp 2, 3, 4) is pressed, the bit 4 (resp 5, 6, 7) is set to 0
* to get the value of a resistor, write the value 0xff at port and
* wait until the corresponding bit returns to 0.
*/
#define joypart(d) (dev2unit(d)&1)
#ifndef JOY_TIMEOUT
#define JOY_TIMEOUT 2000 /* 2 milliseconds */
#endif
static d_open_t joyopen;
static d_close_t joyclose;
static d_read_t joyread;
static d_ioctl_t joyioctl;
static struct cdevsw joy_cdevsw = {
.d_version = D_VERSION,
.d_flags = D_NEEDGIANT,
.d_open = joyopen,
.d_close = joyclose,
.d_read = joyread,
.d_ioctl = joyioctl,
.d_name = "joy",
};
devclass_t joy_devclass;
int
joy_probe(device_t dev)
{
#ifdef WANT_JOYSTICK_CONNECTED
#ifdef notyet
outb(dev->id_iobase, 0xff);
DELAY(10000); /* 10 ms delay */
return (inb(dev->id_iobase) & 0x0f) != 0x0f;
#else
return (0);
#endif
#else
return (0);
#endif
}
int
joy_attach(device_t dev)
{
int unit = device_get_unit(dev);
struct joy_softc *joy = device_get_softc(dev);
joy->rid = 0;
joy->res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &joy->rid,
RF_ACTIVE|RF_SHAREABLE);
if (joy->res == NULL)
return ENXIO;
joy->bt = rman_get_bustag(joy->res);
joy->port = rman_get_bushandle(joy->res);
joy->timeout[0] = joy->timeout[1] = 0;
joy->d = make_dev(&joy_cdevsw, unit, 0, 0, 0600, "joy%d", unit);
joy->d->si_drv1 = joy;
gone_in_dev(dev, 12, "joy(4) driver");
return (0);
}
int
joy_detach(device_t dev)
{
struct joy_softc *joy = device_get_softc(dev);
if (joy->res != NULL)
bus_release_resource(dev, SYS_RES_IOPORT, joy->rid, joy->res);
if (joy->d)
destroy_dev(joy->d);
return (0);
}
static int
joyopen(struct cdev *dev, int flags, int fmt, struct thread *td)
{
int i = joypart (dev);
struct joy_softc *joy = dev->si_drv1;
if (joy->timeout[i])
return (EBUSY);
joy->x_off[i] = joy->y_off[i] = 0;
joy->timeout[i] = JOY_TIMEOUT;
return (0);
}
static int
joyclose(struct cdev *dev, int flags, int fmt, struct thread *td)
{
int i = joypart (dev);
struct joy_softc *joy = dev->si_drv1;
joy->timeout[i] = 0;
return (0);
}
static int
joyread(struct cdev *dev, struct uio *uio, int flag)
{
struct joy_softc *joy = dev->si_drv1;
bus_space_handle_t port = joy->port;
bus_space_tag_t bt = joy->bt;
struct timespec t, start, end;
int state = 0;
struct timespec x, y;
struct joystick c;
#ifndef __i386__
int s;
s = splhigh();
#else
disable_intr ();
#endif
nanotime(&t);
end.tv_sec = 0;
end.tv_nsec = joy->timeout[joypart(dev)] * 1000;
timespecadd(&end, &t, &end);
for (; timespeccmp(&t, &end, <) && (bus_space_read_1(bt, port, 0) & 0x0f); nanotime(&t))
; /* nothing */
bus_space_write_1 (bt, port, 0, 0xff);
nanotime(&start);
end.tv_sec = 0;
end.tv_nsec = joy->timeout[joypart(dev)] * 1000;
timespecadd(&end, &start, &end);
t = start;
timespecclear(&x);
timespecclear(&y);
while (timespeccmp(&t, &end, <)) {
state = bus_space_read_1 (bt, port, 0);
if (joypart(dev) == 1)
state >>= 2;
nanotime(&t);
if (!timespecisset(&x) && !(state & 0x01))
x = t;
if (!timespecisset(&y) && !(state & 0x02))
y = t;
if (timespecisset(&x) && timespecisset(&y))
break;
}
#ifndef __i386__
splx(s);
#else
enable_intr ();
#endif
if (timespecisset(&x)) {
timespecsub(&x, &start, &x);
c.x = joy->x_off[joypart(dev)] + x.tv_nsec / 1000;
} else
c.x = 0x80000000;
if (timespecisset(&y)) {
timespecsub(&y, &start, &y);
c.y = joy->y_off[joypart(dev)] + y.tv_nsec / 1000;
} else
c.y = 0x80000000;
state >>= 4;
c.b1 = ~state & 1;
c.b2 = ~(state >> 1) & 1;
return (uiomove((caddr_t)&c, sizeof(struct joystick), uio));
}
static int
joyioctl(struct cdev *dev, u_long cmd, caddr_t data, int flag, struct thread *td)
{
struct joy_softc *joy = dev->si_drv1;
int i = joypart (dev);
int x;
switch (cmd) {
case JOY_SETTIMEOUT:
x = *(int *) data;
if (x < 1 || x > 10000) /* 10ms maximum! */
return EINVAL;
joy->timeout[i] = x;
break;
case JOY_GETTIMEOUT:
*(int *) data = joy->timeout[i];
break;
case JOY_SET_X_OFFSET:
joy->x_off[i] = *(int *) data;
break;
case JOY_SET_Y_OFFSET:
joy->y_off[i] = *(int *) data;
break;
case JOY_GET_X_OFFSET:
*(int *) data = joy->x_off[i];
break;
case JOY_GET_Y_OFFSET:
*(int *) data = joy->y_off[i];
break;
default:
return (ENOTTY);
}
return (0);
}